18907$CH01 PDF 2003guide

User Manual: PDF T E X T F I L E S

Open the PDF directly: View PDF .
Page Count: 64

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

Accurate



Smokeless

Powder

DISCLAIMER

Accurate Arms Company, Inc. disclaims all possible liability for

damages, including actual, incidental and consequential, result-

ing from usage of information or advice contained in this book.

Use data and advice at your own risk and with caution.

Accurate Arms Company, Inc.

McEwen, Tennessee

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

TABLE OF CONTENTS

Accurate Powder Specifications.................................................................. Inside Front Cover

Introduction and Special Notes............................................................................................. 3

Acknowledgments ................................................................................................................ 5

Legend ................................................................................................................................ 5

Special Warnings About Internal Chamber/Bore Dimensions and Configurations .................. 6

Accurate



Smokeless Powder Descriptions ........................................................................... 8

Smokeless Propellant Storage .............................................................................................. 10

Handgun Data......................................................................................................................14

Cowboy Action Shooting.......................................................................................................22

Rifle Data.............................................................................................................................26

Bushing Data for Shotshell Propellants .................................................................................45

Shotshell Data......................................................................................................................47

A Quick Guide to Shotshell Primers and Wads .....................................................................63

What’s New in This Manual

•Data for MAGPRO for .300 Win Short Mag (WSM), .270 Win Short Mag (WSM), 7mm Win Short

Mag (WSM), .243 Win, .25/06 Rem, .264 Win Mag, .270 Win, 7mm Rem Mag, 7mm Rem Ultra

Mag, .30-06 Springfield, .300 Rem Ultra Mag, .338 Lapua Mag

•New calibers including .300 SAUM, 7mm WSM and .270 WSM.

•Updated powder descriptions



2003 Accurate Arms Company, Inc., McEwen, Tennessee.

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

INTRODUCTION

This booklet is an introductory guide to the use of our Accurate



Smokeless Propellants,

including the Scot

series of shotshell propellants. The data for the metallic cartridges has been

derived from our more comprehensive No. 2 loading guide. (It is available from your local dealer,

or check the inside back cover of this booklet for ordering details.) The shotshell data is the

latest we have available on the Scot series and is only available in this guide.

SAFETY

In reloading, the prime concern should be SAFETY. Always wear eye protection when

reloading, even when working with ‘‘non-volatile’’ components. Always keep the reloading area

clean. Never have more than one propellant within easy reach at any given time. Avoid having

similar looking bullets of different weights on the bench at the same time. Read the safety notes

in the center of the booklet before loading.

If you are new to reloading, we recommend that you obtain and read a book such as Dean

Grennell’s ‘‘ABC’s of Reloading’’ or any other publication specifying the reloading procedures

in detail. It will help provide the basics for getting started. Loading manuals from the bullet

companies provide information about reloading for metallic cartridges. All loading tools (metallic

and shotshell) come with instructional text.

Metallic Centrefire Calibers:

As with all editions of our loading data, as well as all other publications, one must be

aware that the velocities and pressures generated for a specific combination of gun (i.e.

chamber/barrel internal dimensions), and components, (i.e primer, case and bullet) may

differ significantly, from what is listed in this guide. That’s the reason why a safety margin

of 10% is built into the ‘‘START’’ load.

This is the golden rule of reloading: To always start at the suggested minimum

‘‘START’’ load. This also applies whenever a change is made to any one of the

components of the combination, i.e., primer, case or bullet.

The only charge that can be guaranteed to be safe, is the minimum or ‘‘START’’ charge.

The misconception that the maximum charge (or any charge beyond the minimum load)

is also safe, is not true at all. The myriad of variables outside the control of the compiler

of reloading data, does not allow for that exact a prediction.

This guide is a report of the velocities developed on a given day under a given set of lab

conditions. Variations as much as 10% have been recorded between different combinations.

Therefore, a variation in performance should be expected. In the case of metallic centerfire

calibers, the minimum loads are listed. In certain cases where only one load is listed, such as

reduced loads for special applications such as training, Cowboy action, galley loads etc, the

listed charge can be used as is. In such cases the fact will be stipulated.

Please use caution when reloading with military cases as some batches of military cases

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

have reduced interior volume and may require reducing the charge even further to keep chamber

pressure in line.

In the case of revolver calibers, some data was compiled using un-vented test barrels.

Please expect a lower velocity in actual revolvers. This lower performance will depend on the

conditions and parameters of each combination. This will depend on the cylinder gap, burn rate

of the propellant, as well as the performance level.

WARNING concerning reduced loads: For this special type of application, it is often

necessary to load below the 50% case capacity level. This, combined with the fact that

fast handgun/shotshell propellants are recommended and used to maintain the combustion

efficiency, creates the real possibility of ‘‘DOUBLE CHARGING.’’ THIS WILL HAVE DISAS-

TROUS RESULTS. Please verify and check each and every loaded case with a marked

plunger before inserting/crimping the bullets. Haste in this case is not worth the risk!!!!

Shotshell Calibers:

The charge tables for shotshell cartridges are to be used as a guideline. Variations can

occur, although to a lesser degree than with metallic centerfire calibers. Even when the exact

same components are used, the difference due to case condition, crimp, and primer may cause

variations beyond what is normally being accepted and/or assumed. Shot shell calibers are

especially sensitive to variations in primers and assembly procedures. The normal varia-

tion in primers even from one manufacturer will result in different ballistics. The shot

weights listed in this booklet are for lead shot; steel shot may not be substituted.

If you find indications of excessive pressure while using loads in this guide STOP

TESTING, and verify all data and loading procedures. If things seem to be in order, check

with our lab personnel before proceeding. The phone number to use is (931) 729 4207.

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

ACKNOWLEDGMENTS

The following companies/individuals have been helpful in the preparation of this loading guide:

Ballistic Products CCI/Speer Douglas Barrels

Bull-X Bullets Clements Casting Hornady Bullets

Eldorado Cartridge Cooper Arms Magnum Research

Lee Precision Forster Products Mayville Engineering (MEC)

Miller Arms Freedom Arms Nosler Bullets

Penny’s Casting Lyman Products RCBS

Redding-SAECO Precision Machine Remington Arms Company

Starline Sierra Bullets White Rock Tool & Die

Thompson/Center Arms H-S Precision Mike Roese

Wolfe Publishing Company C. Sharps Arms Bill Wiseman

Barnes Bullets

LEGEND

A-F A-Frame NOS Nosler

BAR Barnes NR No recommendation

BP Ballistic Products OAL Overall length

BT Ballistic Tip OZ Ounce

CB Claybuster PART Partition

CLE Clements PC Pattern control

DGW Dixie Gun Works PEN Penny’s Custom Bullets

DE Double end wadcutter PMC PMC/Eldorado Cartridge

F/S Feet per second POST Postell

FA Freedom Arms PSPCL Pointed Soft Point Core-Lokt

FED Federal REM Remington

FIO Fiocchi RN Round Nose

FN Flat Nose RPM Rock Pistol Manufacturing

FS Failsafe SSolo

GD Gold Dot S&W Smith and Wesson

GS Grand Slam SCHM Schmitzer

H&R Harrington and Richardson SIR Sirocco

HB Hollow base wadcutter SP Spitzer

HDY Hornady SPBT Soft Point Boat Tail

HPBT Hollow Point Boat Tail SPR Speer

IMI Israel Military Industries SRA Sierra

(L) Lead SWC Semi-wadcutter

LY Lyman SWF Swift

MAX Maximum T/C Thompson/Center Arms

MIL Military ULA Ultra Light Arms

MIN Minimum WIN Winchester

N100 Nitro 100 XX Hollow Point

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

SPECIAL WARNINGS!!!

Concerning the internal dimensions and configurations of centerfire

metallic calibers, especially Semi-auto pistols. This warning is not aimed at

specific weapons, but any weapon with the conditions or dimensions as described

below. Accurate Arms did not compile special data for any weapon.

Chamber dimensions:

It is extremely important to note that due to aftermarket modifications and

for certain factory produced semi-auto pistols, some pistols have chamber config-

urations that do not fully support the chambered cartridge case.

This modification is incorporated to aid in the reliable feeding of the round

from the magazine. Although this practice is acceptable with some calibers such

as the 45ACP which generate relatively low pressures, this kind of incomplete

support can be a real problem with high performance calibers such as the

9mmx19P, 38Super, 40S&W and 10mm Auto calibers. Although it might also be

acceptable for first fired conditions such as factory ammunition, or new unused

cases, a potential hazardous condition can be created when cases are reloaded

for the second or subsequent time. Whenever a deformed case results after

firing (e.g., a bulged or ‘‘pregnant’’ shape from the base of the main body

towards one third to half of the case body), it is a sure sign that the case is not

fully supported. Although this bulged part is reformed during resizing, the case

strength could be weakened. The problem occurs when this part of the weakened

case again lines up with the modified part of the chamber. This will then cause

the case to fail and the gasses to be ejected into the internal cavity of the weapon.

The loading data published by Accurate Arms was developed in our ballistic

laboratory in accordance with SAAMI test methods and equipment and does not

exceed Maximum Average Pressure recommended by SAAMI. This information

is safe for use in firearms which provide complete support of the case. Failure

to fully support the case with cartridges of such intensity may result in bulged

cases, ruptured cases, separated case heads or other consequences which may

result in destruction/damage to the firearm and/or injury or death to the shooter

and/or bystanders. This can happen no matter whose propellant is used.

We recommend that if you own a firearm where the chamber does not fully

support the chambered round and is producing the above mentioned symptoms,

you contact the manufacturer to determine if the case is fully supported, or have

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

a competent gunsmith examine the firearm and determine the amount of support

provided the case.

If your firearm does not provide complete support for the case, please take

extreme care and refrain from reloading cases.

Unconventional internal rifling/bore profiles

in conjunction with cast/lead bullets

This concerns the combination of using cast/lead bullets with rifling configu-

rations other than the standard ‘‘square’’ land and groove profile.

In order to properly engage the bullet, any barrel with an unconventional

rifling profile needs to have an extremely tight bore diameter. When lead/cast

bullets are used in conjunction with these types of barrels, it is extremely impor-

tant to properly select the correct type, size (diameter) and hardness of the bullet.

Any bullet material that might collect in the freebore/throat area will cause a

delay in bullet displacement during firing, which will have disastrous results.

This is especially true in the case of typical high performance auto pistol

calibers such as the 9mmx19P, 40S&W, 10mm Auto etc, and in the case of high

performance 45ACP+P loads.

We recommend that the shooter/reloader always be aware of the level of

leading that is occurring for their combination. Any excessive build up of material

should prompt the cleaning of the bore. When plated cast bullets are used, make

absolutely sure it is of the best quality possible with no possibility of separation

of the plated material form the lead core.

Accurate Arms Company has felt it necessary to place these warnings

because the continued safety and welfare of the shooting public compels

us to do so.

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

Accurate



Smokeless Propellants

The

Accurate



Smokeless Propellants listed below are in approximate burning order from fastest to

slowest within each group. All propellants are manufactured with nitro-cotton as the main energetic ingredient.

Double base propellants have NG or nitroglycerine as the second energetic ingredient.

PISTOL PROPELLANTS

No. 2 An extremely fast burning, double base ball-type handgun powder specifically designed to have a

relatively low loading density. A very clean burning powder that is well suited for low-performance and low

loading density applications like Cowboy Action. It is certainly the most efficient and cost effective ball-type

powder available for handgun loads.

No. 5 A fast burning, double base, ball-type handgun powder. This powder is extremely versatile and can

be used in all handgun calibers. No. 5 can be used over a wide performance range from low performance

target and Cowboy Action applications to full power defense loads. The powder meters well and strikes a

good balance between ballistics and cost efficiency.

No. 7 An intermediate burning, double base, ball-type handgun powder. This is a good choice for high

performance handgun calibers, especially those designed and used on semi-auto pistols such as the .357

SIG, .400 Corbon, 10mm Auto etc. It is also suitable for the magnum revolver calibers as a cost effective

alternative to the slower burning powders normally used for the magnum cartridges.

No. 9 A slow burning, double base, ball-type handgun powder. The powder is suitable for standard

magnum handgun calibers such as .357 Magnum and the .44 Magnum as well as the extreme magnum

calibers such as .454 Casull, .450 Extreme and .50 Action Express. A good all-around powder that will serve

a wide range of high performance handgun applications.

4100 This is a slow burning, double base, ball-type handgun powder that was originally designed for the

.410 shotgun. The powder is well suited for large capacity handgun cartridges like .44 Magnum, .454

Casull, .450 Extreme, .50 Action Express, etc. when maximum velocity is required (e.g., hunting, silhouette).

The load data is limited so No. 9 can be used as guideline and the charge increased by approximately 3%.

RIFLE PROPELLANTS

1680 An extremely fast burning, double base, ball-type rifle powder that is Accurate’s fastest rifle powder.

This powder suits some large capacity handgun cartridges like .50 Action Express, as well as low capacity

rifle calibers such as the 7.62mmx39 and .22 Hornet. This powder is also well suited for light bullets in

.222 Rem and .223 Rem and for intermediate type straight-walled calibers like the .449LW and .444 Marlin etc.

5744 An extremely fast burning, double base, extruded rifle powder. This unique powder can be used in

both extreme magnum handgun and a wide range of rifle calibers. The powder is characterized by excellent

ignitability and consistency over a very wide performance range. The ignitability coupled with the ‘‘bulki-

ness’’ makes this powder an excellent choice for use in reduced loads for many rifle calibers and in large

capacity obsolete black powder calibers such as the .45–70Gov, .45–90/-110/-120 and the .50–90 through

.50–120 Type calibers.

2015 A very fast burning, single base, extruded rifle powder. The powder was developed around the .223

Rem type calibers. Very popular in .22 and 6mm calibers especially the’’ PPC’’ and ‘‘BR’’ designated calibers.

Works well in large bore calibers (e.g., .45–70 Gov, .458 Win Mag, and the old black powder .45 and .50

calibers) as it provides a well-balanced loading density which decreases powder position sensitivity.

2230 A very fast burning, double base, ball-type rifle powder. This versatile powder was designed around

the .223 Rem caliber but can be used in many small and medium sized calibers including the .308 Win.

It flows very well and is ideal for the shooter utilizing auto loading machines for Semi-auto rifles such as

the AR15. Works well in large bore calibers (e.g., .45–70 Gov, .458 Win Mag, and the old black powder .45

and .50 calibers) as it provides a well-balanced loading density which decreases powder position sensitivity.

2460 A fast burning, double base, ball-type rifle powder that is a slower derivative of the 2230 powder. Is

suitable for small and medium sized caliber applications but with slightly higher loading densities than

2230. It provides an additional option to shooters in order to fine tune and optimize loads and combinations

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

with calibers ranging from the .223 Rem, .308 Win and for light bullets in .30–06Springfield. Within threshold

limit for M1/M14 systems.

2495 A medium fast burning, single base, extruded rifle powder that was developed around the .308 Win.

and can be used over a very wide range of calibers. It’s extremely popular for use in the .308 Win and .30–06

Service shooting disciplines. This versatile powder has good ignition characteristics, and when combined

with the progressive burn rate, can be used over a wide performance range while maintaining good consistency.

2520 A medium fast burning, double base, ball-type rifle powder that was designed around the .308Win.

This powder is extremely popular with service shooters and is known as the ‘‘Camp Perry’’ powder. An

excellent choice for use in the .308 Winchester and also the .30–06 Springfield. This versatile powder has

excellent flow characteristics and is within the threshold limit for M1/M14 systems.

4064 A medium fast burning, single base, extruded rifle powder that is similar to IMR 4064 but with a

short cut that provides for better flow. This versatile powder works well in calibers ranging from standard

.30–06 Springfield to necked-down calibers such as .22–250, .220 Swift, 7x57 Mauser etc. Popular with

service shooters, this powder still falls within the threshold limits for the M1 system, making it about the

slowest extruded powder suitable for this application.

2700 A medium fast burning, double base, ball-type rifle powder that is ideally suited for medium capacity

necked down calibers such as the .22–250 Remington, .220 Swift, .243 Winchester, .270 Winchester etc.

This powder is suited for both medium- and over-bore calibers, making it very popular with varmint hunters.

Will also flow well in auto-loaders and volumetric dispensing equipment.

4350 A medium slow burning, single base, extruded rifle powder that is very similar to IMR 4350. A very

popular powder which can be used in a wide range of calibers from the standard .30–06 Springfield to

‘‘overbore’’ calibers such as 7mm Rem. Mag, .300 WSM and .300 Winchester Magnum etc. Excellent for

the large capacity, large bore calibers like the .375 H & H providing a balance between ballistic performance

and loading densities.

3100 A slow burning, single base, extruded rifle powder specifically designed for large capacity overbore

magnum calibers such as the 7mm Rem Mag, .264 Win Mag, etc. It provides for high loading densities in

these calibers and at full to slightly compressed loads in the medium sized overbore calibers (.243 Win

and .270 Win). Will also work well in the new series of WSM and Remington SAUM calibers.

MAGPRO A slow burning, double base, ball-type rifle powder developed specifically for all the new Short

Magnum calibers of both Winchester (WSM) and Remington (SAUM) except for .300 SAUM. This powder

excels in the 7mm WSM as well as the .270 WSM and even derivatives of the wildcat 6.5 Short Action.

Excellent in all overbore magnums such as the ULTRA magnums from Remington i.e. 7mm RUM, .338

RUM as well as the high performance .338 Lapua Magnum. Excellent flow in progressive auto-loaders

and volumetric dispensing equipment. This is THE magnum rifle powder to have.

8700 An extremely slow burning, double base, ball-type rifle powder which is Accurate’s slowest powder.

It was originally developed for the .50 Browning (12.7mmx99 Nato). This powder delivers optimum perfor-

mance in heavily necked down large capacity calibers such as the .257 Weatherby Magnum, .264 Win

Mag and 7mm RUM. This powder is so slow that even at maximum and compressed loading densities, it

is virtually impossible to cause any over pressure.

SHOTSHELL PROPELLANTS

NITRO 100 Accurate’s fastest burning, double base, flake shotgun powder. Besides being a cost effective

choice for all 12 gauge applications, Nitro 100 is also an ideal powder for low pressure/low loading density

handgun cartridges such as target and Cowboy Action shooting. It is a robust powder which is very clean

burning in all the mentioned applications.

SOLO 1000 An extremely fast burning, single base, flake shotgun powder. Solo 1000 was the pioneer in

the clean burning revolution and is an excellent choice for trap, sporting clays and skeet shooting. An ultra

clean burning powder best suited for 12 gauge shotgun loads but which is also suited for target handgun

loads in .45 ACP and Cowboy Action.

SOLO 1250 A fast burning, single base, flake shotgun powder. Works well with heavier shot loads in 12

gauge and for all shotshell applications through 28 gauge. Solo 1250 is slightly faster burning than IMR’s

PB powder. Can also be loaded in some handgun loads for target and cowboy action.

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

PROPERTIES

AND STORAGE

OF SMOKELESS

POWDER

DANGER!

SMOKELESS GUNPOWDER

EXTREMELY FLAMMABLE

KEEP AWAY FROM HEAT, SPARKS

OR OPEN FLAME

STORE IN A COOL DRY PLACE

KEEP OUT OF THE REACH

OF CHILDREN

Ammunition handloading has become increasingly popular in recent years. This leaflet discusses proper-

ties of smokeless powder and offers recommendations for its storage. This leaflet is intended to increase

the knowledge of all concerned individuals and groups regarding smokeless powder. The statements and

recommendations made are not intended to supersede local, state or Federal regulations. Proper authori-

ties should be consulted on regulations for storage and use of smokeless powder in each specific commu-

nity. A second leaflet entitled ‘‘SPORTING AMMUNITION PRIMERS: PROPERTIES, HANDLING, &

STORAGE FOR HANDLOADING’’ supplements this leaflet on Smokeless Powders.

PROPERTIES OF SMOKELESS POWDER

Smokeless powders, or propellants, are essentially mixtures of chemicals designed to burn under controlled

conditions at the proper rate to propel a projectile from a gun. Smokeless powders are made in three forms:

1. Thin, circular flakes or wafers

2. Small cylinders

3. Small spheres

Single-base smokeless powders derive their main source of energy from nitrocellulose.

The energy released from double-base smokeless powders is derived from both nitrocellulose and nitro-

glycerin.

All smokeless powders are extremely flammable; by design, they are intended to burn rapidly and vigor-

ously when ignited.

Oxygen from the air is not necessary for the combustion of smokeless powders since they contain sufficient

built-in oxygen to burn completely, even in an enclosed space such as the chamber of a firearm.

In effect, ignition occurs when the powder granules are heated above their ignition temperature. This can

occur by exposing powder to:

1. A flame such as a match or primer flash.

2. An electrical spark or the sparks from welding, grinding, etc.

3. Heat from an electric hot plate or a fire directed against or near a closed container even

if the powder itself is not exposed to the flame.

When smokeless powder burns, a great deal of gas at high temperature is formed. If the powder is confined,

this gas will create pressure in the surrounding structure. The rate of gas generation is such, however,

that the pressure can be kept at a low level if sufficient space is available or if the gas can escape.

SPORTING ARMS AND AMMUNITION MANUFACTURERS’ INSTITUTE, INC.

555 DANBURY ROAD, WILTON, CT 06897

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

In this respect smokeless powder differs from blasting agents or high explosives such as dynamite or

blasting gelatin, although smokeless powder may contain chemical ingredients common to some of

these products.

High explosives such as dynamite are made to detonate, that is, to change from solid state to gaseous

state with evolution of intense heat at such a rapid rate that shock waves are propagated through any

medium in contact with them. Such shock waves exert pressure on anything they contact, and, as a matter

of practical consideration, it is almost impossible to satisfactorily vent away the effects of a detonation

involving any appreciable quantity of dynamite.

Smokeless powder differs considerably in its burning characteristics from common ‘‘black powder.’’

Black powder burns essentially at the same rate out in the open (unconfined) as when in a gun.

When ignited in an unconfined state, smokeless powder burns inefficiently with an orange colored flame.

It produces a considerable amount of light brown noxious smelling smoke. It leaves a residue of ash and

partially burned powder. THE FLAME IS HOT ENOUGH TO CAUSE SEVERE BURNS.

The opposite is true when it burns under pressure as in a cartridge fired in a gun. Then it produces very

little smoke, a small glow, and leaves very little or no residue. The burning rate of smokeless powder

increases with increased pressure.

If burning smokeless powder is confined, gas pressure will rise and eventually can cause the container to

burst. Under such circumstances, the bursting of a strong container creates effects similar to an explosion.

For this reason, the Department of Transportation (formerly Interstate Commerce Commission) sets specifi-

cations for shipping containers for propellants and requires tests of loaded containers—under actual fire

conditions—before approving them for use.

When smokeless powder in D.O.T. approved containers is ignited during such tests, container seams split

open or lids pop off—to release gases and powder from confinement at low pressure.

HOW TO CHECK SMOKELESS POWDER FOR DETERIORATION

Although modern smokeless powders are basically free from deterioration under proper storage conditions,

safe practices require a recognition of the signs of deterioration and its possible effects.

Powder deterioration can be checked by opening the cap on the container and smelling the contents.

Powder undergoing deterioration has an irritating acidic odor. (Don’t confuse this with common solvent

odors such as alcohol, ether and acetone.)

Check to make certain that powder is not exposed to extreme heat as this may cause deterioration. Such

exposure produces an acidity which accelerates further reaction and has been known, because of the

heat generated by the reaction, to cause spontaneous combustion.

Never salvage powder from old cartridges and do not attempt to blend salvaged powder with new powder.

Don’t accumulate old powder stocks.

The best way to dispose of deteriorated smokeless powder is to burn it out in the open at an isolated

location in small shallow piles (not over 1" deep). The quantity burned in any one pile should never exceed

one pound. Use an ignition train of slow burning combustible material so that the person may retreat to a

safe distance before powder is ignited.

CONSIDERATIONS FOR STORAGE OF SMOKELESS POWDER

Smokeless powder is intended to function by burning, so it must be protected against accidental exposure

to flame, sparks or high temperatures.

For these reasons, it is desirable that storage enclosures be made of insulating materials to protect the

powder from external heat sources.

Once smokeless powder begins to burn, it will normally continue to burn (and generate gas pressure) until

it is consumed.

D.O.T. approved containers are constructed to open up at low internal pressures to avoid the effects

normally produced by the rupture or bursting of a strong container.

Storage enclosures for smokeless powder should be constructed in a similar manner:

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

1. Of fire resistant and heat-insulating materials to protect contents from external heat.

2. Sufficiently large to satisfactorily vent the gaseous products of combustion which would

result if the quantity of smokeless powder within the enclosure accidentally ignited.

If a small, tightly enclosed storage enclosure is loaded to capacity with containers of smokeless powder

the walls of the enclosure will expand or move outwards to release the gas pressure—if the powder in

storage is accidentally ignited.

Under such conditions, the effects of the release of gas pressure are similar or identical to the effects

produced by an explosion.

Hence only the smallest practical quantities of smokeless powder should be kept in storage, and then in

strict compliance with all applicable regulations and recommendations of the National Fire Protection

Association (reprinted at end of leaflet).

RECOMMENDATIONS FOR STORAGE OF SMOKELESS POWDER

STORE IN A COOL, DRY PLACE. Be sure the storage area is free from any possible sources of excess

heat and is isolated from open flame, furnaces, hot water heaters, etc. Do not store smokeless powder

where it will be exposed to the sun’s rays. Avoid storage in areas where mechanical or electrical equipment

is in operation. Restrict from the storage areas heat or sparks which may result from improper, defective

or overloaded electrical circuits.

DO NOT STORE SMOKELESS POWDER IN THE SAME AREA WITH SOLVENTS, FLAMMABLE GASES

OR HIGHLY COMBUSTIBLE MATERIALS.

STORE ONLY IN DEPARTMENT OF TRANSPORTATION APPROVED CONTAINERS.

Do not transfer the powder from an approved container into one which is not approved.

DO NOT SMOKE IN AREAS WHERE POWDER IS STORED OR USED. Place appropriate ‘‘No Smoking’’

signs in these areas.

DO NOT SUBJECT THE STORAGE CABINETS TO CLOSE CONFINEMENT.

STORAGE CABINETS SHOULD BE CONSTRUCTED OF INSULATING MATERIALS AND WITH A WEAK

WALL, SEAMS OR JOINTS TO PROVIDE AN EASY MEANS OF SELF-VENTING.

DO NOT KEEP OLD OR SALVAGED POWDERS. Check old powders for deterioration regularly. Destroy

deteriorated powders immediately.

OBEY ALL REGULATIONS REGARDING QUANTITY AND METHODS OF STORING. Do not store all your

powders in one place. If you can, maintain separate storage locations. Many small containers are safer

than one or more large containers.

KEEP YOUR STORAGE AND USE AREA CLEAN. Clean up spilled powder promptly. Make sure the

surrounding area is free of trash or other readily combustible materials.

KNOW THE FOLLOWING RECOMMENDATIONS ON STORAGE AND HANDLING ISSUED BY THE NA-

TIONAL FIRE PROTECTION ASSOCIATION, BATTERY MARCH PARK, QUINCY, MASS. 02269 AND RE-

PRINTED WITH THEIR PERMISSION: CODE FOR THE MANUFACTURE, TRANSPORTATION STORAGE,

AND USE OF EXPLOSIVE MATERIALS NFPA NO. 495-1992.

CHAPER 10. SMALL ARMS AMMUNITION AND PRIMERS, SMOKELESS PROPELLANTS AND BLACK

POWDER PROPELLANTS

10–3. SMOKELESS PROPELLANTS

10–3.1 Quantities of smokeless propellants not exceeding 25 lb (11.3 kg) in shipping containers approved

by the U.S. Department of Transportation may be transported in a private vehicle.

10–3.2 Quantities of smokeless propellants exceeding of 25 lb (11.3 kg) but not exceeding 50 lb (22.7

kg), transported in a private vehicle, shall be transported in a portable magazine having wood

walls of at least 1-inch (25.4 mm) nominal thickness.

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

10–3.3 Transportation of more than 50 lb (22.7 kg) of smokeless propellants in a private vehicle is pro-

hibited.

10–3.4 Commercial shipments of smokeless propellants in quantities not exceeding 100 lb (45.4 kg) are

classified for transportation purposes as flammable solids when packaged according to U.S.

Department of Transportation Hazardous Materials Regulations (Title 49 Code of Federal Regula-

tions, Part 173.197a), and shall be transported accordingly.

10–3.5 Commercial shipments of smokeless propellants exceeding 100 lb (45.4 kg) or not packaged in

accordance with the regulations cited in 10–3.4 shall be transported according to U.S. Department

of Transportation regulations for Class B propellant explosives.

10–3.6 Smokeless propellants shall be stored in shipping containers specified by the U.S. Department of

Transportation Hazardous Materials Regulations.

10–3.7 Smokeless propellants intended for personal use in quantities not exceeding 20 lb (9.1 kg) may

be stored in original containers in residences. Quantities exceeding 20 lb (9.1 kg) but not exceeding

50 lb (22.7 kg), may be stored in residences if kept in a wooden box or cabinet having walls of at

least 1-inch (25.4 mm) nominal thickness.

10–3.8 Not more than 20 lb (9.1 kg) of smokeless propellants, in containers of 1 lb (0.45 kg) maximum

capacity, shall be displayed in commercial establishments.

10–3.9 Commercial stocks of smokeless propellants shall be stored as follows:

a. Quantities exceeding 20 lb (9.1 kg), but not exceeding 100 lb (45.4 kg), shall be stored in portable

wooden boxes having walls of at least 1-in. (25.4 mm) thickness.

b. Quantities exceeding 100 lb (45.4 kg), but not exceeding 800 lb (363 kg), shall be stored in

nonportable storage cabinets having walls of at least 1-in. (25.4 mm) thickness. Not more than

400 lb (181 kg) may be stored in any one cabinet, and cabinets shall be separated by a distance

of at least 25 ft (7.63 m) or by a fire partition having a fire resistance of at least 1 hr.

c. Quantities exceeding 800 lb (363 kg), but not exceeding 5,000 lb (2268 kg), may be stored in a

building if the following requirements are met:

1. The warehouse or storage room shall not be accessible to unauthorized personnel.

2. Smokeless propellant shall be stored in nonportable storage cabinets having wood walls at least

1-in. (25.4 mm) thick and having shelves with not more thana3ftseparation between shelves.

3. No more than 400 lb (181 kg) shall be stored in any one cabinet.

4. Cabinets shall be located against walls of the storage room or warehouse with at least 40 ft (12.2

m) between cabinets.

5. Separation between cabinets may be reduced to 20 ft (6.1 m) if barricades twice the height of

the cabinets are attached to the wall, midway between each cabinet. The barricades shall extend

at least 10 ft (3 m) outward, shall be firmly attached to the wall, and shall be constructed of

⁄

-in.

(6.4 mm) boiler plate, 2-in. (51 mm) thick wood, brick, or concrete block.

6. Smokeless propellant shall be separated from materials classified by the U.S. Department of

Transportation as flammable liquids, flammable solids, and oxidizing materials by a distance of

25 ft (7.63 m) or by a fire partition having a fire-resistance of at least 1 hour.

7. The building shall be protected by an automatic sprinkler system installed according to NFPA

No. 13, Standard for the Installation of Sprinkler Systems.

d. Smokeless propellants not stored according to (a), (b), and (c) above shall be stored in a type 4

magazine constructed and located according to Chapter 6.

Reprinted with permission from NFPA 495-1992, Code for the Manufacture, Transportation, Storage and Use of Explosive

Materials, Copyright 1992, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the complete

and official position of the NFPA on the referenced subject which is represented only by the standard in its entirety.

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

HANDGUN DATA 14 HANDGUN DATA

HANDGUN DATA

FOR MORE COMPLETE LOADING INFORMATION, BUY ACCURATE’S RELOADING

MANUAL, BOOK TWO. SEE INSIDE BACK COVER FOR DETAILS.

7mm T/CU

Gun DOUGLAS Barrel length 14"

Primer CCI 400 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L)145 RCBS OAL = 2.500"

5744 18.0 1721 20.0 1871

1680 20.3 1751 22.5 1903

2230 25.2 1892 28.0 2057

2460 25.7 1916 28.5 2083

2520 25.7 1871 28.5 2034

SRA 100 HP OAL = 2.430"

5744 20.7 2134 23.0 2320

1680 25.2 2240 28.0 2435

2015 25.2 1964 28.0 2135

2230 27.0 2065 30.0 2245

2460 27.0 2050 30.0 2228

2520 25.2 1867 28.0 2029

SRA 140 SBT OAL = 2.540"

5744 18.5 1783 20.5 1938

1680 22.1 1849 24.5 2010

2015 24.3 1893 27.0 2058

2230 25.7 1934 28.5 2102

2460 26.1 1940 29.0 2109

2520 24.8 1796 27.5 1952

HDY 162 HPBT OAL = 2.640"

5744 16.7 1555 18.5 1690

1680 20.3 1707 22.5 1855

2015 23.4 1817 26.0 1975

2230 24.3 1807 27.0 1964

2460 24.8 1802 27.5 1959

2520 24.8 1731 27.5 1882

REM 175 PSP OAL = 2.495"

5744 16.2 1493 18.0 1623

1680 19.4 1499 21.5 1629

2015 23.4 1701 26.0 1849

2230 24.3 1644 27.0 1787

2460 24.3 1658 27.0 1802

2520 24.8 1629 27.5 1771

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

7mm IHMSA

Gun DOUGLAS Barrel length 14"

Primer CCI 200 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 139 SP OAL = 2.765"

2230 32.9 2139 36.5 2325

2460 33.3 2160 37.0 2348

2520 33.8 2148 37.5 2335

NOS 150 BT OAL = 2.650"

2230 32.0 2065 35.5 2245

2460 32.4 2068 36.0 2248

2520 32.4 2030 36.0 2207

SRA 168 HPBT OAL = 2.650"

2230 31.1 1932 34.5 2100

2460 31.5 1953 35.0 2123

2520 32.0 1961 35.5 2132

7mm BR REMINGTON

Gun DOUGLAS Barrel length 15"

Primer REM 7

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 120 SSP OAL = 2.225"

2015 26.1 2175 29.0 2364

2230 27.9 2171 31.0 2360

2460 28.4 2184 31.5 2374

2520 28.8 2205 32.0 2397

SRA 150 SBT OAL = 2.255"

2015 24.8 1972 27.5 2144

2230 26.1 1953 29.0 2123

2460 26.6 1978 29.5 2150

2520 27.5 2004 30.5 2178

SRA 168 HPBT OAL = 2.310"

2015 23.4 1802 26.0 1959

2230 25.2 1825 28.0 1984

2460 25.7 1857 28.5 2018

2520 27.0 1911 30.0 2077

TECH LINE: 931-729-4207

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

HANDGUN DATA 15 HANDGUN DATA

.30 HERRETT

Gun DOUGLAS Barrel length 14"

Primer REM 9

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 130 SSP OAL = 2.295"

2015 27.0 1986 30.0 2159

2230 28.8 1955 32.0 2125

2460 29.3 1956 32.5 2126

HDY 150 SP OAL = 2.385"

2015 24.8 1791 27.5 1947

2230 27.0 1803 30.0 1960

2460 27.5 1821 30.5 1979

SRA 165 SBT OAL = 2.490"

2015 23.4 1706 26.0 1854

2230 24.8 1652 27.5 1796

2460 25.2 1685 28.0 1831

.300 WHISPER

Gun WISEMAN Barrel length 16"

Primer REM 7

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 125 BT OAL = 2.050"

No. 2* N/A N/A 4.8 1095

No. 5* N/A N/A 5.6 1054

No. 7* N/A N/A 6.2 1071

No. 9 12.3 1788 13.7 1943

1680 (C) 16.7 1762 18.5 1915

5744 (C) 16.2 1811 18.0 1969

SRA 180 HPBT OAL = 2.265"

No. 5* N/A N/A 6.8 1079

No. 7* N/A N/A 7.4 1086

No. 9* N/A N/A 7.9 1080

No. 9 10.2 1394 11.3 1515

1680 (C) 13.5 1438 15.0 1563

5744 (C) 12.2 1360 13.5 1478

SRA 220 HPBT OAL = 2.265"

No. 5* N/A N/A 6.3 1062

No. 7* N/A N/A 7.5 1043

No. 9 8.6 1125 9.5 1223

1680 (C) 10.4 1034 11.5 1124

5744 (C) 9.9 1087 11.0 1181

7.62 x 25mm TOKAREV

(CZ-52 only)

Gun DOUGLAS Barrel length 9"

Primer CCI 500 Case Starline

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 85 RN OAL = 1.316"

No. 2 5.9 1509 6.5 1640

No. 5 7.7 1625 8.5 1766

No. 7 9.2 1631 10.2 1773

No. 9 11.8 1814 13.1 1972

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

*Subsonic loads; do not reduce loads. (C) Denotes a compressed load for maximum charge.

7.62 x 25mm TOKAREV

(CZ-52 only)

(CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 110 RN OAL = 1.300"

No. 2 5.6 1331 6.2 1447

No. 5 7.2 1444 8.0 1570

No. 7 8.6 1490 9.5 1620

No. 9 10.5 1553 11.7 1688

.30/30 WINCHESTER

Gun T/C Contender Barrel length 14"

Primer CCI 200 Case FED

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 110 RN OAL = 2.440"

2015 32.0 2206 35.5 2398

2230 32.4 2153 36.0 2340

2495 33.3 2036 37.0 2213

2460 33.3 2179 37.0 2369

2520 34.2 2177 38.0 2366

4064 35.1 2005 39.0 2179

2700 36.0 2107 40.0 2290

HDY 130 SSP OAL = 2.625"

2015 28.8 1995 32.0 2168

2230 30.6 1989 34.0 2162

2495 29.7 1813 33.0 1971

2460 31.5 1992 35.0 2165

2520 33.3 2088 37.0 2270

4064 34.2 2053 38.0 2231

2700 34.2 1935 38.0 2103

SPR 150 RN OAL = 2.540"

2015 26.1 1775 29.0 1929

2230 28.5 1840 31.7 2000

2495 27.5 1680 30.5 1826

2460 29.3 1854 32.5 2015

2520 30.2 1882 33.5 2046

4064 29.7 1697 33.0 1845

2700 33.3 1875 37.0 2038

.32S&WLONG

Gun DOUGLAS Barrel length 6"

Primer FED 100 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L)HDY 90 HBWC OAL = 0.930"

No. 2 1.8 723 2.0 786

SRA 90 JHP OAL = 1.190"

No. 2 2.3 815 2.5 886

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

HANDGUN DATA 16 HANDGUN DATA

.32H&RMAGNUM

Gun DOUGLAS Barrel length 10"

Primer CCI 500 Case FED

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 100 SWC OAL = 1.310"

No. 2 3.2 1067 3.6 1160

No. 5 4.2 1160 4.7 1261

HDY 85 JHP OAL = 1.325"

No. 2 3.6 1167 4.0 1269

No. 5 4.8 1229 5.3 1336

SPR 100 JHP OAL = 1.335"

No. 2 3.3 1054 3.7 1146

No. 5 4.5 1126 5.0 1224

.32/20 WINCHESTER

Gun Ruger B’hawk Barrel length 6

⁄

Primer CCI 400 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 100 SWC OAL = 1.585"

No. 5 4.3 796 4.8 865

No. 7 5.5 850 6.1 924

5744 8.4 828 9.3 900

SRA 90 JHC OAL = 1.565"

No. 5 4.5 834 5.0 906

No. 7 5.5 862 6.1 937

5744 8.7 846 9.7 920

HDY 100 XTP OAL = 1.565"

No. 5 4.2 776 4.7 844

No. 7 5.2 816 5.8 887

5744 8.6 856 9.5 930

.32/20 CONTENDER ONLY

Gun DOUGLAS Barrel length 14"

Primer CCI 400 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 100 SWC OAL = 1.585"

No. 5 5.4 1235 6.0 1342

No. 7 6.3 1219 7.0 1325

SRA 90 JHC OAL = 1.565"

No. 5 5.6 1265 6.2 1375

No. 7 7.0 1344 7.8 1461

HDY 100 XTP OAL = 1.585"

No. 5 5.4 1224 6.0 1330

No. 7 6.7 1256 7.4 1365

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.380 AUTO

Gun OBERMEYER Barrel length 3"

Primer CCI 500 Case FED

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 100 RN OAL = 0.950"

No. 2 3.2 868 3.6 943

No. 5 4.1 848 4.5 922

HDY 90 XTP OAL = 0.960"

No. 2 3.3 856 3.7 930

No. 5 4.3 846 4.8 920

HDY 100 FMJ OAL = 0.975"

No. 2 3.1 730 3.4 793

No. 5 4.4 823 4.9 895

9mm LUGER

Gun OBERMEYER Barrel length 4"

Primer WIN SP Case FED

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 115 SWC OAL = 1.110"

No. 2 4.4 1054 4.9 1146

No. 5 5.7 1087 6.3 1182

No. 7 7.8 1127 8.7 1225

(L) 145 RN OAL = 1.140"

No. 2 3.3 822 3.7 893

No. 5 4.6 905 5.1 984

No. 7 6.5 968 7.2 1052

HDY 115 FMJ OAL = 1.095"

No. 2 4.0 1005 4.4 1092

No. 5 6.3 1097 7.0 1192

No. 7 7.9 1100 8.8 1196

HDY 124 RN OAL = 1.095"

No. 2 3.7 972 4.1 1057

No. 5 5.8 1104 6.4 1200

No. 7 7.2 1073 8.0 1166

SPR 147 TMJ OAL = 1.095"

No. 2 3.6 817 4.0 888

No. 5 4.8 912 5.3 991

No. 7 6.5 963 7.2 1047

NOTE: Some high performance handguns (such as the

Glock and Sig/Sauer) may not cycle properly with

the faster powders.

.38 SUPER AUTO +P

Gun WILSON Barrel length 5"

Primer CCI 500 Case PMC

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 115 SWC OAL = 1.285"

No. 2 4.3 1042 4.8 1133

No. 5 6.8 1166 7.6 1267

No. 7 8.8 1214 9.8 1320

No. 9 11.3 1264 12.5 1374

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

HANDGUN DATA 17 HANDGUN DATA

.38 SUPER AUTO +P (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 160 RN OAL = 1.250"

No. 2 4.1 943 4.5 1025

No. 5 5.4 964 6.0 1048

No. 7 7.2 1026 8.0 1115

No. 9 8.6 1027 9.5 1116

HDY 115 FMJ OAL = 1.240"

No. 2 5.1 1104 5.7 1200

No. 5 7.5 1215 8.3 1321

No. 7 9.3 1233 10.3 1340

No. 9 11.7 1283 13.0 1395

IMI 124 FMJ OAL = 1.245"

No. 2 4.9 1070 5.4 1163

No. 5 6.8 1132 7.6 1230

No. 7 8.6 1162 9.6 1263

No. 9 11.3 1238 12.5 1346

HDY 158 JHP OAL = 1.250"

No. 2 3.9 892 4.3 970

No. 5 5.6 944 6.2 1026

No. 7 7.2 979 8.0 1064

No. 9 8.7 1031 9.7 1121

.38 SPECIAL

Gun S&W MODEL 14 Barrel length 8

⁄

Primer CCI 500 Case HDY

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 148 HBWC OAL = 1.152"

N100 2.5 811 2.8 882

S1000 2.5 770 2.8 837

No. 2 2.6 662 2.9 720

No. 5 3.6 742 4.0 807

(L) 158 SWC OAL = 1.481"

N100 3.0 826 3.3 898

S1000 3.1 788 3.4 857

No. 2 3.6 799 4.0 868

No. 5 5.3 865 5.9 940

HDY 110 XTP OAL = 1.435"

N100 4.0 1061 4.4 1153

S1000 4.0 1006 4.4 1094

No. 2 5.0 996 5.6 1083

No. 5 6.6 1003 7.3 1090

SPR 125 JHP OAL = 1.445"

N100 3.7 949 4.1 1031

S1000 3.7 929 4.1 1010

No. 2 4.8 911 5.3 990

No. 5 6.1 791 6.8 860

HDY 158 XTP OAL = 1.445"

N100 2.9 723 3.2 786

S1000 3.1 734 3.4 798

No. 2 3.6 696 4.0 756

No. 5 5.2 774 5.8 841

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.357 MAGNUM

Gun TEST BARREL Barrel length 8"

Primer CCI 500 Case HDY

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 158 SWC OAL = 1.580"

No. 2 5.2 1057 5.8 1149

No. 5 8.1 1246 9.0 1354

No. 7 9.9 1300 11.0 1413

No. 9 12.2 1379 13.5 1499

(L) 174 SWC OAL = 1.660"

5744 13.1 1252 14.5 1361

(L) 180 FNGC OAL = 1.575"

No. 2 5.2 1081 5.8 1175

No. 5 8.2 1282 9.1 1394

No. 7 9.4 1294 10.4 1406

No. 9 12.4 1414 13.8 1537

4100 12.9 1451 14.3 1577

(L) 200 LNGC OAL = 1.625"

No. 2 4.9 995 5.4 1081

No. 5 7.7 1201 8.6 1305

No. 7 8.9 1218 9.9 1324

No. 9 11.3 1294 12.5 1407

4100 11.7 1333 13.0 1449

SPR 110 JHP OAL = 1.575"

No. 2 7.6 1542 8.4 1676

No. 5 10.8 1693 12.0 1840

No. 7 12.6 1702 14.0 1850

No. 9 16.6 1846 18.4 2006

4100 19.6 1944 21.8 2113

HDY 125 XTP OAL = 1.570"

No. 2 7.2 1432 8.0 1557

No. 5 10.4 1590 11.5 1728

No. 7 11.9 1596 13.2 1735

No. 9 15.3 1722 17.0 1872

4100 17.3 1777 19.2 1932

HDY 158 XTP OAL = 1.580"

No. 2 5.9 1159 6.6 1260

No. 5 8.8 1337 9.8 1453

No. 7 10.3 1494 11.4 1624

No. 9 13.5 1502 15.0 1633

4100 14.2 1527 15.8 1660

5744 13.1 1259 14.5 1368

HDY 180 XTP OAL = 1.575"

No. 2 5.4 1025 6.0 1114

No. 5 8.3 1220 9.2 1326

No. 7 9.3 1223 10.3 1329

No. 9 11.7 1322 13.0 1437

4100 12.1 1352 13.4 1470

5744 11.7 1100 13.0 1196

NOTE: Expect up to 250 feet per second lower velocity with

vented 4" barrel.

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

HANDGUN DATA 18 HANDGUN DATA

.357 SIG

Gun HS PRECISION Barrel length 4"

Primer FED 100 Case FED

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 115 SWC OAL = 1.140"

No. 2 5.6 1149 6.2 1249

No. 5 8.1 1213 9.0 1319

No. 7 9.9 1236 11.0 1344

No. 9 12.2 1316 13.5 1430

(L) 147 RN OAL = 1.140"

No. 2 4.2 965 4.7 1049

No. 5 6.8 1076 7.5 1170

No. 7 8.6 1121 9.6 1218

No. 9 9.5 1076 10.5 1170

SPR 88 JHP OAL = 1.130"

No. 2 7.1 1421 7.9 1545

No. 5 10.0 1487 11.1 1616

No. 7 11.8 1473 13.1 1601

No. 9 13.5 1421 15.0 1545

HDY 115 XTP OAL = 1.140"

No. 2 5.8 1174 6.4 1276

No. 5 8.5 1246 9.4 1354

No. 7 10.2 1274 11.3 1385

No. 9 12.2 1319 13.5 1434

HDY 124 XTP OAL = 1.140"

No. 2 5.4 1115 6.0 1212

No. 5 8.3 1244 9.2 1325

No. 7 9.9 1214 11.0 1320

No. 9 11.7 1276 13.0 1387

HDY 147 XTP OAL = 1.140"

No. 2 4.8 976 5.3 1061

No. 5 7.1 1066 7.9 1159

No. 7 8.3 1067 9.2 1160

No. 9 9.5 1065 10.5 1158

.357 REMINGTON MAXIMUM

Gun DOUGLAS Barrel length 14"

Primer CCI BR 4 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 210 RNGC OAL = 1.965"

5744 15.3 1397 17.0 1518

NOS 158 JHP OAL = 1.905"

5744 18.9 1679 21.0 1825

SRA 170 SIL OAL = 1.900"

5744 18.5 1630 20.5 1772

SPR 200 TMJ OAL = 1.990"

5744 16.2 1377 18.0 1497

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.38/40 WINCHESTER

Gun ROCK Barrel length 6

⁄

Primer WLP Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 155 RN OAL = 1.585"

5744 14.9 932 16.5 1013

(L) 185 RN OAL = 1.580"

5744 13.1 828 14.5 900

SRA 150 JHC OAL = 1.575"

5744 15.8 956 17.5 1039

SRA 180 JHC OAL = 1.585"

5744 14.9 884 16.5 961

.40 S&W

(WARNING: See page 6.)

Gun HS PRECISION Barrel length 4"

Primer CCI 500 Case HDY

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 155 SWC OAL = 1.130"

No. 2 5.7 1027 6.3 1116

No. 5 6.8 1065 7.5 1158

No. 7 8.7 1054 9.7 1146

No. 9 10.8 1051 12.0 1142

(L) 175 SWC OAL = 1.115"

No. 2 4.8 897 5.3 975

No. 5 5.5 907 6.1 986

No. 7 7.6 933 8.4 1014

No. 9 9.2 918 10.2 998

NOS 135 JHP OAL = 1.125"

No. 2 6.8 1147 7.6 1247

No. 5 8.4 1257 9.3 1266

No. 7 10.1 1138 11.2 1237

NOS 150 JHP OAL = 1.120"

No. 2 6.3 1063 7.0 1155

No. 5 7.5 1076 8.3 1170

No. 7 9.2 1045 10.2 1136

SRA 165 JHP OAL = 1.135"

N100 3.7 890 4.1 967

No. 2 5.4 955 6.0 1038

No. 5 6.9 968 7.7 1052

No. 7 8.5 983 9.4 1069

No. 9 10.8 996 12.0 1083

HDY 180 XTP OAL = 1.135"

No. 2 5.0 890 5.6 967

No. 5 5.9 888 6.6 965

No. 7 7.7 900 8.5 978

No. 9 9.9 937 11.0 1019

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

HANDGUN DATA 19 HANDGUN DATA

10mm AUTO

Gun HS PRECISION Barrel length 5"

Primer CCI 300 Case HDY

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 145 FN OAL = 1.250"

No. 2 6.8 1190 7.5 1293

No. 5 8.7 1244 9.7 1352

No. 7 10.8 1258 12.0 1367

No. 9 13.5 1308 15.0 1422

(L) 175 SWC OAL = 1.245"

No. 2 6.0 1074 6.7 1167

No. 5 7.5 1073 8.3 1166

No. 7 9.4 1103 10.4 1199

No. 9 12.2 1182 13.6 1285

NOS 135 JHP OAL = 1.250"

No. 2 8.2 1328 9.1 1444

No. 5 10.3 1383 11.4 1503

No. 7 12.2 1358 13.6 1476

No. 9 15.8 1386 17.5 1507

HDY 155 JHP OAL = 1.250"

No. 2 7.2 1192 8.0 1296

No. 5 9.0 1227 10.0 1334

No. 7 11.4 1269 12.7 1379

No. 9 14.3 1301 15.9 1414

NOS 170 JHP OAL = 1.250"

No. 2 6.9 1122 7.7 1220

No. 5 8.7 1173 9.7 1275

No. 7 10.8 1201 12.0 1305

No. 9 13.5 1234 15.0 1341

HDY 200 XTP OAL = 1.250"

No. 2 5.7 958 6.3 1041

No. 5 7.0 981 7.8 1066

No. 7 8.8 1004 9.8 1091

No. 9 11.3 1076 12.5 1170

.41 REMINGTON MAGNUM

Gun WILSON Barrel length 9

⁄

Primer CCI 300 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 210 SWC OAL = 1.675"

No. 2 8.3 1210 9.2 1315

No. 5 11.3 1321 12.5 1436

No. 7 13.1 1327 14.5 1442

No. 9 16.2 1455 18.0 1582

5744 19.4 1317 21.5 1431

SRA 170 JHP OAL = 1.565"

No. 2 9.0 1335 10.0 1451

No. 5 10.8 1374 12.0 1493

No. 7 14.0 1431 15.5 1555

No. 9 17.7 1569 19.7 1705

5744 21.6 1451 24.0 1577

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.41 REMINGTON MAGNUM (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 210 XTP OAL = 1.570"

No. 2 8.6 1145 9.5 1245

No. 5 10.4 1216 11.5 1322

No. 7 12.8 1269 14.2 1379

No. 9 16.2 1399 18.0 1521

5744 18.5 1220 20.5 1326

.44 SPECIAL

Gun DOUGLAS Barrel length 7

⁄

Primer CCI 300 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 245 RN OAL = 1.600"

N100 3.4 692 3.8 752

S1000 4.1 728 4.5 791

No. 2 4.2 753 4.7 819

No. 5 6.1 791 6.8 860

(L) 250 SWC OAL = 1.575"

5744 11.3 678 12.5 737

IMI 240 JHP OAL = 1.485"

N100 3.4 536 3.8 583

S1000 3.6 540 4.0 587

No. 2 4.1 556 4.5 604

No. 5 5.9 672 6.5 730

.44/40 WINCHESTER

Gun DOUGLAS Barrel length 7

⁄

Primer CCI 300 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 200 FN OAL = 1.580"

5744 15.3 952 17.0 1035

.44 REMINGTON MAGNUM

Gun RUGER REDHAWK Barrel length 7

⁄

Primer CCI 300 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 240 SWC OAL = 1.560"

No. 2 9.0 1178 10.0 1280

No. 5 12.6 1288 14.0 1400

No. 7 15.8 1341 17.5 1458

No. 9 19.5 1426 21.7 1550

5744 21.6 1330 24.0 1446

(L) 300 SSK OAL = 1.720"

No. 2 8.6 1047 9.5 1138

No. 5 10.4 1049 11.6 1140

No. 7 13.5 1145 15.0 1245

No. 9 16.7 1214 18.5 1320

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

HANDGUN DATA 20 HANDGUN DATA

.44 REMINGTON MAGNUM (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 180 JHP OAL = 1.560"

No. 2 10.0 1328 11.1 1444

No. 5 14.8 1486 16.4 1615

No. 7 18.5 1570 20.5 1707

NOS 200 JHP OAL=1.595

No. 2 9.9 1235 11.0 1342

No. 5 14.2 1409 15.8 1532

No. 7 16.8 1415 18.7 1538

No. 9 22.5 1542 25.0 1676

RAN 240 FN OAL = 1.575"

No. 2 9.3 1161 10.3 1262

No. 5 12.6 1260 14.0 1370

No. 7 15.1 1322 16.8 1437

No. 9 18.0 1386 20.0 1507

4100 20.3 1414 22.5 1537

SPR 270 GD OAL = 1.575"

No. 2 9.7 1125 10.8 1223

No. 5 12.2 1219 13.5 1325

No. 7 14.0 1227 15.6 1334

No. 9 16.7 1252 18.5 1361

4100 18.5 1293 20.5 1405

HDY 300 XTP OAL = 1.595"

No. 2 8.8 1019 9.8 1108

No. 5 11.7 1122 13.0 1220

No. 7 13.1 1095 14.5 1190

No. 9 15.9 1172 17.7 1274

5744 18.0 1096 20.0 1191

.45 ACP

Gun 1911A1 Barrel length 5"

Primer REM 2

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 155 SWC OAL = 1.240"

N100 5.0 1000 5.5 1087

S1000 5.9 1076 6.5 1170

No. 2 6.8 1108 7.5 1204

No. 5 9.0 1094 10.0 1189

(L) 230 RN OAL = 1.230"

N100 4.1 767 4.5 834

S1000 4.6 826 5.1 898

No. 2 5.0 800 5.6 870

No. 5 7.7 891 8.5 968

HDY 185 XTP OAL = 1.210"

N100 4.8 880 5.3 957

S1000 5.2 914 5.8 993

No. 2 6.8 991 7.5 1077

No. 5 9.2 1014 10.2 1102

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.45 ACP (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 200 XTP OAL = 1.225"

N100 4.3 803 4.8 873

S1000 5.2 841 5.8 914

No. 2 5.9 886 6.5 963

No. 5 8.7 966 9.7 1050

SRA 230 FMJ OAL = 1.250"

N100 4.1 759 4.5 825

S1000 5.0 780 5.5 848

No. 2 5.5 804 6.1 874

No. 5 7.8 853 8.7 927

.45 COLT

Gun DOUGLAS Barrel length 7

⁄

Primer CCI 300 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 225 FN OAL = 1.620"

N100 5.3 825 5.9 897

S1000 5.9 836 6.5 909

No. 2 5.5 803 6.1 873

No. 5 10.9 950 12.1 1033

(L) 240 SWC OAL = 1.570"

N100 5.1 826 5.7 898

S1000 5.7 783 6.3 851

No. 2 5.4 777 6.0 845

No. 5 10.2 918 11.3 998

5744 16.7 882 18.5 959

(L) 255 SWC OAL = 1.600"

N100 5.0 799 5.5 868

S1000 5.2 742 5.8 807

No. 2 5.3 748 5.9 813

No. 5 9.4 884 10.4 961

5744 16.0 791 17.8 860

SRA 185 JHP OAL = 1.575"

N100 6.1 914 6.8 993

S1000 6.8 945 7.6 1027

No. 5 10.8 989 12.0 1075

5744 18.5 992 20.5 1078

HDY 200 XTP OAL = 1.595"

N100 5.8 878 6.4 954

S1000 6.3 857 7.0 932

No. 5 10.4 949 11.5 1032

SRA 240 JHP OAL = 1.590"

N100 5.0 771 5.6 838

S1000 5.4 714 6.0 776

No. 5 9.5 892 10.5 970

5744 16.7 883 18.5 960

SPR 260 JHP OAL = 1.600"

N100 4.8 671 5.3 729

S1000 5.2 639 5.8 695

No. 5 9.5 701 10.5 762

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:38)

HANDGUN DATA 21 HANDGUN DATA

.45 COLT—HIGH PRESSURE LOADS

FOR RUGER,T/C,FA

Gun HS PRECISION Barrel length 7"

Primer CCI 300 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 325 FNGC OAL = 1.585"

No. 7 13.1 1055 14.6 1147

No. 9 15.3 1097 17.0 1192

4100 17.7 1154 19.7 1254

(L) 350 FNGC OAL = 1.675"

No. 7 12.2 983 13.6 1068

No. 9 14.6 1038 16.2 1128

4100 15.8 1072 17.5 1165

SRA 240 JHC OAL = 1.590"

No. 7 16.0 1252 17.8 1361

No. 9 18.5 1280 20.6 1391

4100 22.3 1374 24.8 1494

NOS 250 JHP OAL = 1.585"

No. 7 15.6 1213 17.3 1319

No. 9 18.2 1262 20.2 1372

4100 21.6 1335 24.0 1451

SPR 300 SP OAL = 1.595"

No. 7 14.6 1122 16.2 1220

No. 9 16.9 1163 18.8 1264

4100 18.0 1151 20.0 1251

.454 CASULL

Gun TEST BARREL Barrel length 7

⁄

Primer CCI 400 Case FA

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 240 JHP OAL = 1.705"

No. 9 25.2 1613 28.0 1753

5744 31.5 1558 35.0 1693

1680 32.4 1566 36.0 1702

SPR 260 JHP OAL = 1.710"

No. 9 24.1 1524 26.8 1657

5744 30.6 1553 34.0 1688

1680 31.5 1514 35.0 1646

HDY 300 XTP OAL = 1.765"

No. 9 23.4 1493 26.0 1623

5744 28.8 1444 32.0 1570

1680 30.2 1466 33.5 1594

TECH LINE: 931-729-4207

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.50 ACTION EXPRESS

Gun DESERT EAGLE Barrel length 6"

Primer CCI 350 Case SPR

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 325 U-C OAL = 1.575"

No. 9 21.4 1147 23.8 1247

1680 34.0 1201 37.8 1305

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

COWBOY ACTION DATA 22 COWBOY ACTION DATA

COWBOY ACTION SHOOTING

This relatively new shooting sport is enjoying ever increasing popularity. As the name implies, cowboy

action shooting involves a less formal (read, more fun) combination of rifle, shotgun and handgun competi-

tion. Typically both male and female participants don Old West-style costumes and use original or replica

blackpowder-style firearms. Cowboy action shooting has had a definite impact on the world of shooting

and reloading.

From our viewpoint as a propellant supplier the resurgence of several old, originally black powder,

cartridges created a challenging situation. Firearms made during the original cowboy era fired cartridges

designed for black powder, which was the only propellant available 125 years ago. These older cartridges

present a special set of problems when loaded with modern smokeless propellants. They are of a relatively

high case capacity, even with modern solid head case design, because they were originally developed to

use black powder. We are also restricted to low chamber pressures because of the firearms that they are

chambered in. Even modern replicas, made of newer and better steels, are still true to the original designs

and the low pressure limits must still be observed in the interest of shooter safety and longevity of the

firearm. Those firearms originally built for black powder are probably best loaded with black powder, as

the steel used then is inferior to that used in later production and the current replicas.

As we developed data for these cartridges we paid particular attention to propellant selection in

balancing the large case capacity with the low pressure limit in order to achieve consistent ignition and

good accuracy. The sport of Cowboy Shooting emphasizes low velocity and low recoil loads. These are

desirable from the standpoint of shooter safety since the targets are steel and the ranges short. The low

recoil reduces shooter fatigue and allows a quicker recovery time between shots during competition. These

low velocity loads are quite sufficient to the task of knocking over target plates.

The following loads are tailored to meet the needs of the modern ‘‘Cowboy Action Shooter.’’ They

should be used exactly as shown with no reductions in charge weight. Bullet weight and type should be

as closely matched as is feasible, as should the overall length of the loaded round. Care must be exercised

to match the bullet diameter to the inside diameter of the cylinder throat. Undersize bullets will NOT

perform well. They allow the already low gas pressure to flow past the base of the bullet and along the

sides. This gas flow vaporizes lead from the bullet surface and deposits it in the cylinder and barrel making

the gun harder to clean and usually deteriorating accuracy. The gas loss also reduces the pressure reached

and results in poor ignition, lower velocity and more residue from the propellant combustion. It is also very

important to have a high bullet pull. A tight fit between the case mouth and the bullet greatly aids ignition.

Low bullet pull can and usually does ruin an otherwise excellent load.

Cowboy Action loads operate at pressures that are not compatible with many modern propellants.

The propellants from the Accurate and Scot product line used in developing this data have proven suitable

for the loads listed, but your favorite propellant may not necessarily work in every cartridge you might

wish. Because of the low charge weight most of these cartridges could hold a double charge of

propellant, perhaps more. It behooves the loader, therefore, to exercise caution and rigorously inspect

his ammunition throughout the loading process to ensure that this doesn’t happen. DO NOT ASSUME IT

CAN’T HAPPEN TO YOU—IT CAN! We here in the customer service department at Accurate Arms

Company hope that you, the shooter, will find this data of value in pursuing your favorite pastime. If you

have any questions or comments please don’t hesitate to call us at 931-729-4207, Monday through Friday,

8:00 am – 4:30 pm, central time.

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

COWBOY ACTION DATA 23 COWBOY ACTION DATA

HANDGUN LOADS

32/20 WINCHESTER

Gun RUGER

Barrel length 6

⁄

Primer CCI 400

Case REM

Maximum Loads

Bullet Powder Grains Vel.

(L) 100 SWC No. 5 4.8 865

OAL = 1.585" No. 7 6.1 924

No. 9 7.0 924

38 SPECIAL

Gun H.S. Precision/

S&W Model 14

Barrel length 8

⁄

Primer CCI 500

Case HDY

Maximum Loads

Bullet Powder Grains Vel.

(L) 130 SWC N100 3.3 949

OAL = 1.420" S1000 3.4 913

No. 2 IMP N/R

No. 5 N/R

(L) 158 SWC N100 3.3 898

OAL = 1.481" S1000 3.4 857

No. 2 IMP 4.0 868

No. 5 5.9 940

357 MAGNUM

Gun S&W

Barrel length 6"

Primer CCI 500

Case HDY

Maximum Loads

Bullet Powder Grains Vel.

(L) 148 DEWC No. 2 IMP 3.0 746

OAL = 1.370" 4.0 919

(L) 148 HBWC No. 2 IMP 2.5 645

OAL = 1.320" 4.0 913

(L) 158 SWC* No. 2 IMP 4.0 864

OAL = 1.510" 5.0 1008

*Note: SWC seated with front driving band flush with case mouth (357 Magnum and 44 Magnum).

38/40 WINCHESTER

Gun RUGER

Barrel length 6

⁄

Primer WLP

Case WIN

Maximum Loads

Bullet Powder Grains Vel.

(L) 145 FP N100 5.8 1027

OAL = 1.580" No. 2 IMP 5.8 1016

(L) 165 FP N100 5.2 959

OAL = 1.580" No. 2 IMP 5.4 946

(L) 185 FP N100 5.0 885

OAL = 1.580" No. 2 IMP 5.0 871

(L) 200 FP N100 4.8 836

OAL = 1.580" No. 2 IMP 4.8 815

44/40 WINCHESTER

Gun TEST BBL

Barrel length 7

⁄

Primer REM 2

⁄

Case REM

Maximum Loads

Bullet Powder Grains Vel.

(L) 190 WC N100 4.6 861

OAL = 1.390" S1000 4.9 860

No. 2 IMP 5.2 891

No. 5 8.5 950

(L) 200 SWC N100 5.3 954

OAL = 1.575" S1000 5.7 929

No. 2 IMP 6.3 961

No. 5 9.2 983

.44 RUSSIAN

Gun TEST BBL

Barrel length 7

⁄

Primer CCI 300

Case STARLINE

Maximum Loads

Bullet Powder Grains Vel.

(L) 200 FN N100 4.0 873

OAL = 1.240" S1000 4.6 923

No. 2 4.8 939

No. 5 7.5 917

5744 13.0 919

(L) 240 SWC N100 3.3 769

OAL = 1.280" S1000 3.7 781

No. 2 4.2 824

No. 5 6.6 814

5744 11.5 824

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

COWBOY ACTION DATA 24 COWBOY ACTION DATA

44 S&W SPECIAL

Gun TEST BBL

Barrel length 7

⁄

Primer CCI 300

Case MIDWAY

Maximum Loads

Bullet Powder Grains Vel.

(L) 190 WC N100 3.7 823

OAL = 1.265" S1000 4.4 842

No. 2 IMP 4.0 836

No. 5 6.7 871

(L) 200 SWC N100 4.1 867

OAL = 1.465" S1000 4.3 813

No. 2 IMP 5.2 905

No. 5 7.4 959

(L) 245 RN N100 3.8 752

OAL = 1.600" S1000 4.5 791

No. 2 IMP 4.7 819

No. 5 6.8 860

(L) 250 SWC N100 4.2 772

OAL = 1.575" S1000 4.3 751

No. 2 IMP 5.0 808

No. 5 7.0 864

44 REMINGTON MAGNUM

Gun TEST BBL

Barrel length 7

⁄

Primer CCI 300

Case WIN

Maximum Loads

Bullet Powder Grains Vel.

(L) 190 WC N100 5.0 964

OAL = 1.390" S1000 5.5 946

No. 2 IMP 5.5 955

No. 5 8.0 951

(L) 200 SWC* N100 4.7 911

OAL = 1.575" S1000 5.0 928

No. 2 IMP 5.0 885

No. 5 7.6 880

(L) 250 SWC* N100 4.5 826

OAL = 1.620" S1000 5.0 809

No. 2 IMP 5.0 838

No. 5 7.0 812

*Note: SWC seated with front driving band flush with case mouth (357 Magnum and 44 Magnum).

45 S&W–SCHOFIELD

Gun TEST BBL

Barrel length 7

⁄

Primer CCI 300

Case STARLINE

Maximum Loads

Bullet Powder Grains Vel.

(L) 200 SWC N100 5.6 959

OAL = 1.450" S1000 6.3 952

No. 2 IMP 5.6 863

(L) 230 RN N100 5.0 867

OAL = 1.450" S1000 5.8 852

No. 2 IMP 5.3 870

(L) 255 SWC N100 4.6 775

OAL = 1.450" S1000 5.5 801

No. 2 IMP 5.1 783

45 COLT

Gun TEST BBL

Barrel length 7

⁄

Primer CCI 300

Case WIN

Use Load as Is; Do Not Reduce

Bullet Powder Grains Vel.

(L) 200 WC N100 6.1 976

OAL = 1.560" S1000 6.7 940

No. 2 IMP 6.4 952

(L) 225 FN N100 5.9 897

OAL = 1.595" S1000 6.5 909

No. 2 IMP 6.1 873

(L) 240 SWC N100 5.7 898

OAL = 1.660" S1000 6.3 851

No. 2 IMP 6.0 845

(L) 250/255 FN N100 5.5 868

OAL = 1.600" S1000 5.8 807

No. 2 IMP 5.9 813

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

COWBOY ACTION DATA 25 COWBOY ACTION DATA

LONG RANGE RIFLE LOADS

.30-30 WINCHESTER

Gun TEST BARREL

Barrel length 24"

Primer CCI 200

Case REM

Maximum Loads

Bullet Powder Grains Vel.

(L) LY 160 PBFN 5744 12.6 1297

OAL = 2.550"

.32-40 WINCHESTER

Gun TEST BARREL

Barrel length 24"

Primer CCI 200

Case REM

Maximum Loads

Bullet Powder Grains Vel.

(L) LY 165 PBFN 5744 16.0 1436

OAL = 2.500"

.38-55 WINCHESTER

Gun TEST BARREL

Barrel length 24"

Primer CCI 200

Case WIN

Maximum Loads

Bullet Powder Grains Vel.

(L) LY 240 PBFN 5744 16.0 1241

OAL = 2.510"

SHOTSHELL LOADS

(See Shotshell Section)

.45-70 GOVERNMENT

Gun TEST BARREL

Barrel length 24"

Primer CCI 200

Case REM NICKEL

Maximum Loads

Bullet Powder Grains Vel.

(L) CLE 300 PB 5744 31.0 1597

OAL = 2.550"

(L) CLE 405 PB 5744 27.5 1355

OAL = 2.560"

(L) LY 500 PBRN 5744 25.0 1209

OAL = 2.850"

NOTE: Crimp bullets firmly.

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 26 RIFLE DATA

RIFLE DATA

FOR MORE COMPLETE LOADING INFORMATION, BUY ACCURATE’S

RELOADING MANUAL, BOOK TWO. SEE INSIDE BACK COVER FOR DETAILS.

17 REMINGTON

Gun DOUGLAS Barrel length 24"

Primer REM 7

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

HDY25HP OAL = 2.170"

2230 19.4 3567 21.5 3877

2460 19.8 3648 22.0 3965

2520 20.4 3655 22.7 3973

4064 21.6 3721 24.0 4045

2700 24.3 3756 27.0 4083

22 HORNET

Gun DOUGLAS Barrel length 24"

Primer CCI 500 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 44 RNGC OAL = 1.665"

5744 8.1 1879 9.0 2042

HDY 35 VMAX OAL = 1.775"

1680 12.2 2631 13.5 2860

SRA 40 HOR OAL = 1.715"

5744 8.7 2031 9.7 2208

1680 12.6 2562 14.0 2785

2015 11.3 1842 12.5 2002

NOS 45 HOR OAL = 1.720"

1680 11.1 2294 12.3 2493

2015 11.3 1912 12.5 2078

HDY50SX OAL = 1.780"

5744 8.1 1795 9.0 1951

222 REMINGTON

Gun DOUGLAS Barrel length 24"

Primer REM 7

⁄

Case REM/WIN

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 45 SB OAL = 2.065"

1680 18.9 3033 21.0 3297

2015 22.1 3113 24.5 3384

2230 24.3 3171 27.0 3447

2460 24.3 3133 27.0 3405

2520 22.5 2904 25.0 3156

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

222 REMINGTON (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY50SX OAL = 2.150"

1680 16.7 2768 18.5 3009

2015 21.2 2951 23.5 3208

2230 22.1 2969 24.5 3227

2460 22.1 2948 24.5 3204

2520 22.5 2835 25.0 3081

NOS 55 SBT OAL = 2.155"

1680 17.1 2664 19.0 2896

2015 20.3 2803 22.5 3047

2230 22.1 2858 24.5 3106

2460 22.1 2844 24.5 3091

2520 22.1 2725 24.5 2962

223 REMINGTON

Gun WILSON Barrel length 24"

Primer REM 7

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 35 VMAX OAL = 2.130"

1680 18.4 3383 20.4 3677

5744 18.8 3381 20.9 3675

2015 22.2 3509 24.7 3814

2230 25.2 3629 28.0 3945

NOS 45 SP OAL = 2.115"

1680 17.5 3038 19.5 3302

2015 22.2 3262 24.7 3546

2230 23.1 3180 25.7 3456

2460 23.5 3198 26.1 3476

2495 22.7 3160 25.2 3435

2520 24.4 3150 27.1 3424

SPR 50 TNT OAL = 2.235"

1680 17.5 2894 19.5 3146

2015 21.8 3116 24.2 3387

2230 22.2 3075 24.7 3342

2460 22.2 3063 24.7 3329

2495 22.7 3019 25.2 3282

2520 24.4 3078 27.1 3346

HDY 53 HPBT OAL = 2.225"

1680 17.1 2803 19.0 3047

2015 20.9 3007 23.3 3268

2230 22.2 2992 24.7 3252

2460 21.8 2975 24.2 3234

2495 22.2 3005 24.7 3266

2520 23.5 2976 26.1 3235

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 27 RIFLE DATA

223 REMINGTON (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 55 SBT OAL = 2.230"

1680 17.5 2813 19.5 3058

2015 21.4 3019 23.8 3281

2230 22.2 2959 24.7 3216

2460 22.7 2973 25.2 3231

2495 22.4 3009 24.9 3271

2520 23.5 2966 26.1 3224

SRA 69 HPBT OAL = 2.250"

2015 19.7 2684 21.9 2917

2230 20.9 2695 23.3 2929

2460 21.1 2752 23.5 2991

2495 21.4 2727 23.8 2964

2520 23.1 2800 25.7 3044

NOTE: Some military cases have lower case capacity than

commercial brass cases and may require reduction

of charge weight by 8–12%. Use extra caution when

loading with military brass.

22 PPC

Gun DOUGLAS Barrel length 24"

Primer REM 7

⁄

Case SAKO

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 50 HP OAL = 2.000"

2015 23.4 3185 26.0 3462

2230 26.1 3328 29.0 3617

2460 26.1 3291 29.0 3577

2495 25.2 3223 28.0 3503

2520 26.1 3189 29.0 3466

NOS 55 SBT OAL = 1.960"

2015 22.5 3016 25.0 3278

2230 25.2 3132 28.0 3404

2460 25.2 3095 28.0 3364

2495 24.8 3147 27.6 3421

2520 26.1 3097 29.0 3366

22 BR REMINGTON

Gun DOUGLAS Barrel length 24"

Primer REM 7

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 40 BT OAL = 2.055"

5744 23.9 3536 26.5 3843

SPR 50 TNT OAL = 2.000"

5744 23.4 3278 26.0 3563

2015 27.5 3431 30.5 3729

2230 30.0 3464 33.3 3765

2460 30.2 3461 33.5 3762

2495 28.8 3274 32.0 3559

2520 30.3 3451 33.7 3751

2700 31.5 3198 35.0 3476

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

22 BR REMINGTON (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 55 SBT OAL = 1.970"

5744 22.1 3068 24.5 3335

2015 26.1 3211 29.0 3490

2230 28.8 3281 32.0 3566

2460 29.3 3317 32.5 3605

2495 27.9 3171 31.0 3447

2520 29.4 3303 32.7 3590

4064 29.3 3232 32.5 3513

2700 30.6 3088 34.0 3357

22/250 REMINGTON

Gun APEX Barrel length 24"

Primer CCI 200 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 50 SP OAL = 2.350"

2015 30.6 3487 34.0 3790

2230 32.4 3496 36.0 3800

2460 32.9 3525 36.5 3831

2520 33.3 3513 37.0 3819

4064 34.2 3492 38.0 3796

4350 36.0 3249 40.0 3531

NOS 55 SBT OAL = 2.370"

2015 29.7 3310 33.0 3598

2230 31.5 3320 35.0 3609

2460 32.4 3376 36.0 3670

2520 32.4 3317 36.0 3605

4064 33.3 3341 37.0 3632

2700 36.0 3363 40.0 3655

4350 36.0 3189 40.0 3466

HDY60HP OAL = 2.400"

2015 29.7 3217 33.0 3497

2230 30.6 3151 34.0 3425

2460 31.5 3219 35.0 3499

2520 32.4 3231 36.0 3512

4064 32.4 3226 36.0 3507

2700 34.2 3200 38.0 3478

4350 36.0 3123 40.0 3395

SPR 70 SSP OAL = 2.325"

2015 27.0 2876 30.0 3126

2230 27.9 2844 31.0 3091

2460 27.9 2831 31.0 3077

2520 29.3 2892 32.5 3144

4064 29.0 2962 32.2 3220

2700 31.1 2871 34.5 3121

4350 34.2 2984 38.0 3244

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 28 RIFLE DATA

220 SWIFT

Gun RUGER 77V Barrel length 26"

Primer FED 210 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 50 HP OAL = 2.700"

4064 35.1 3536 39.0 3843

2700 40.5 3712 45.0 4035

4350 39.6 3625 44.0 3940

3100 39.6 3302 44.0 3589

NOS 55 SBT OAL = 2.680"

4064 33.3 3281 37.0 3566

2700 39.2 3525 43.5 3832

4350 39.6 3584 44.0 3896

3100 39.6 3301 44.0 3588

HDY60HP OAL = 2.700"

2700 37.8 3318 42.0 3607

4350 39.6 3514 44.0 3820

3100 39.6 3246 44.0 3528

SPR 70 SSR OAL = 2.660"

2700 35.1 3160 39.0 3435

4350 37.4 3207 41.5 3486

3100 39.6 3139 44.0 3412

6mm PPC

Gun DOUGLAS Barrel length 24"

Primer REM 7

⁄

Case SAKO

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 60 HP OAL = 2.050"

2015 24.5 2910 27.2 3163

2230 26.6 2921 29.5 3175

2460 27.0 2944 30.0 3200

2495 25.7 2921 28.5 3175

HDY70SX OAL = 2.080"

2015 24.3 2720 27.0 2957

2230 25.7 2690 28.5 2924

2460 26.6 2743 29.5 2981

2495 25.7 2779 28.5 3021

6mm BR REMINGTON

Gun DOUGLAS Barrel length 24"

Primer REM 7

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 70 HP OAL = 2.170"

2015 27.5 3019 30.5 3281

2230 29.3 2996 32.5 3256

2460 29.7 3013 33.0 3275

2495 28.4 3001 31.5 3262

2520 30.6 3020 34.0 3283

2700 31.5 2713 35.0 2949

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

6mm BR REMINGTON (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 80 SP OAL = 2.120"

2015 26.1 2800 29.0 3044

2230 27.9 2794 31.0 3037

2460 28.8 2874 32.0 3124

2495 27.0 2829 30.0 3075

2520 29.7 2871 33.0 3121

2700 31.5 2698 35.0 2933

243 WINCHESTER

Gun HS PRECISION Barrel length 24"

Primer CCI 200 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 55 BT OAL = 2.605"

2015 35.1 3433 39.0 3731

2230 37.4 3502 41.5 3807

2460 38.7 3561 43.0 3871

2520 39.2 3574 43.5 3885

2700 43.7 3517 48.5 3823

4350 (C) 42.8 3235 47.5 3516

3100 (C) 42.8 2919 47.5 3173

HDY70SX OAL = 2.650"

2015 32.9 3123 36.5 3395

2495 35.1 3210 39.0 3489

2520 35.1 3096 39.0 3365

4064 37.8 3201 42.0 3479

2700 40.5 3218 45.0 3498

4350 43.2 3249 48.0 3531

3100 43.2 2959 48.0 3216

SRA 80/85 HPBT OAL = 2.660"

2495 31.5 2826 35.0 3072

4064 34.2 2889 38.0 3140

2700 36.9 2889 41.0 3140

4350 39.6 3030 44.0 3294

3100 41.4 2881 46.0 3132

MAGPRO (C)

48.3 3168 53.7 3510

SPR 100 SBT OAL = 2.700"

2495 27.0 2441 30.0 2653

4064 27.9 2432 31.0 2644

2700 32.4 2533 36.0 2753

4350 35.1 2743 39.0 2981

3100 38.7 2729 43.0 2966

MAGPRO 42.8 2838 47.5 3107

6mm REMINGTON

Gun DOUGLAS Barrel length 24"

Primer CCI 200 Case FED

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 55 BT OAL = 2.765"

2015 36.9 3583 41.0 3895

2495 40.1 3606 44.5 3920

4064 40.5 3709 45.0 4031

2700 45.5 3602 50.5 3915

4350 (C) 45.9 3456 51.0 3756

3100 (C) 45.9 3111 51.0 3381

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 29 RIFLE DATA

6mm REMINGTON (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY70SP OAL = 2.775"

2015 36.7 3221 40.8 3501

2495 37.8 3283 42.0 3568

4064 40.1 3383 44.5 3677

4350 45.0 3154 50.0 3428

3100 45.9 2932 51.0 3187

SPR 80 SP OAL = 2.825"

2015 34.9 3014 38.8 3276

2495 36.0 3018 40.0 3280

4064 39.2 3206 43.5 3485

2700 43.2 3143 48.0 3416

4350 44.6 3134 49.5 3406

3100 45.9 2931 51.0 3186

NOS 100 SP OAL = 2.825"

2015 32.9 2664 36.5 2896

4064 36.0 2824 40.0 3070

2700 41.0 2814 45.5 3059

4350 41.0 2798 45.6 3041

3100 43.2 2743 48.0 2981

250/3000 SAVAGE

Gun DOUGLAS Barrel length 24"

Primer REM 9

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 75 HP OAL = 2.465"

2015 28.4 2866 31.5 3115

2230 30.2 2865 33.5 3114

2460 30.6 2925 34.0 3179

2520 30.6 2871 34.0 3121

4064 32.4 2916 36.0 3170

4350 36.9 2791 41.0 3034

3100 36.9 2516 41.0 2735

SRA 90 HPBT OAL = 2.465"

2015 27.5 2695 30.5 2929

2230 28.8 2673 32.0 2905

2460 28.8 2665 32.0 2897

2520 29.3 2670 32.5 2902

4064 31.5 2757 35.0 2997

4350 36.0 2697 40.0 2931

3100 36.9 2513 41.0 2731

HDY 100 SP OAL = 2.500"

2015 27.0 2569 30.0 2792

2230 27.0 2449 30.0 2662

2460 27.9 2472 31.0 2687

2520 28.8 2539 32.0 2760

4064 31.5 2635 35.0 2864

4350 35.1 2559 39.0 2781

3100 36.9 2454 41.0 2667

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

257 ROBERTS

Gun DOUGLAS Barrel length 24"

Primer CCI 200 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 75 HP OAL = 2.745"

2520 35.6 2915 39.5 3169

4064 38.1 3036 42.3 3300

2700 41.4 2984 46.0 3243

4350 42.3 2996 47.0 3257

3100 45.9 2910 51.0 3163

SRA 90 HPBT OAL = 2.735"

2520 33.3 2711 37.0 2947

4064 36.5 2817 40.5 3062

2700 37.8 2750 42.0 2989

4350 40.5 2761 45.0 3001

3100 45.0 2812 50.0 3056

NOS 100 BT OAL = 2.785"

2520 31.5 2525 35.0 2745

4064 34.2 2572 38.0 2796

2700 36.9 2626 41.0 2854

4350 40.1 2666 44.5 2898

3100 44.1 2635 49.0 2864

SRA 117 SBT OAL = 2.775"

2520 30.6 2351 34.0 2555

2700 35.1 2409 39.0 2619

4350 38.7 2484 43.0 2700

3100 43.2 2517 48.0 2736

25/06 REMINGTON

Gun WISEMAN Barrel length 24"

Primer CCI 250 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 100 FNGC OAL = 2.950"

5744 19.8 1906 22.0 2072

SRA 75 HP OAL = 3.065"

2700 47.7 3453 53.0 3753

4350 (C) 53.1 3478 59.0 3780

3100 (C) 54.0 3298 60.0 3585

SRA 87/90 HP OAL = 3.075"

2700 45.0 3143 50.0 3416

4350 48.6 3194 54.0 3472

3100 (C) 50.9 3100 56.5 3370

MAGPRO 56.3 3261 62.5 3573

NOS 100 BT OAL = 3.250"

2700 43.2 2956 48.0 3213

4350 46.8 3011 52.0 3273

3100 (C) 49.5 3020 55.0 3283

8700 (C) 58.5 2616 65.0 2843

NOS 115 PART OAL = 3.195"

2700 41.1 2713 45.7 2949

4350 44.6 2809 49.5 3053

3100 47.5 2814 52.8 3059

8700 (C) 57.6 2579 64.0 2803

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 30 RIFLE DATA

25/06 REMINGTON (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 120 SPBT OAL = 3.120"

2700 40.5 2662 45.0 2893

4350 44.1 2707 49.0 2942

3100 46.8 2740 52.0 2978

MAGPRO 48.6 2777 54.0 3039

8700 (C) 57.6 2505 64.0 2723

25/20 WINCHESTER

Gun DOUGLAS Barrel length 24"

Primer CCI 400 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 65 FN OAL = 1.592"

5744 9.9 1724 11.0 1874

(L) 90 FN OAL = 1.615"

5744 9.0 1541 10.0 1675

HDY60FP OAL = 1.592"

5744 10.3 1797 11.4 1953

SPR 75 FN OAL = 1.585"

5744 10.1 1702 11.2 1850

260 REMINGTON

Gun H. S. PRECISION Barrel length 24"

Primer REM 9

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 85 HP OAL = 2.670"

5744 20.0 2160 33.0 3214

4064 39.6 3081 44.0 3349

2700 43.2 3073 48.0 3340

4350 (C) 43.2 2966 48.0 3224

3100 (C) 43.2 2688 48.0 2922

HDY 100 SP OAL = 2.750"

4064 38.7 2915 43.0 3168

2700 42.3 2922 47.0 3176

4350 (C) 44.1 3005 49.0 3266

3100 (C) 45.0 2799 50.0 3042

SWF 120 SP OAL = 2.710"

4064 35.1 2592 39.0 2817

2700 38.7 2601 43.0 2827

4350 41.0 2719 45.5 2955

3100 (C) 42.8 2621 47.5 2849

HDY 129 SP OAL = 2.780"

4064 34.2 2470 38.0 2685

2700 36.9 2474 41.0 2689

4350 39.6 2606 44.0 2833

3100 (C) 42.3 2663 47.0 2895

SWF 140 SP OAL = 2.740"

4064 31.5 2294 35.0 2494

2700 35.1 2331 39.0 2534

4350 37.4 2458 41.5 2672

3100 (C) 40.5 2429 45.0 2640

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

260 REMINGTON (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 140 HPBT OAL = 2.775"

4064 32.9 2363 36.5 2569

2700 36.0 2408 40.0 2617

4350 38.7 2546 43.0 2767

3100 (C) 41.4 2516 46.0 2735

6.5 x 55mm SWEDISH

Gun DOUGLAS Barrel length 24"

Primer CCI 200 Case PMC

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 140 SPGC OAL = 3.020"

5744 26.1 2181 29.0 2371

2495 29.7 2178 33.0 2367

2520 30.6 2173 34.0 2362

4064 34.2 2293 38.0 2492

2700 36.9 2308 41.0 2509

4350 39.6 2319 44.0 2521

3100 (C) 42.3 2278 47.0 2476

8700 (C) 47.7 2020 53.0 2196

HDY 100 SP OAL = 2.975"

2520 36.9 2728 41.0 2965

4064 39.6 2815 44.0 3060

2700 43.2 2846 48.0 3093

4350 43.2 2695 48.0 2929

3100 44.1 2506 49.0 2724

HDY 129 SP OAL = 3.025"

2520 33.8 2353 37.5 2558

4064 37.4 2519 41.5 2738

2700 38.7 2443 43.0 2655

4350 41.4 2533 46.0 2753

3100 44.1 2503 49.0 2721

SPR 140 SP OAL = 3.000"

2520 33.3 2302 37.0 2502

4064 36.0 2363 40.0 2569

2700 37.8 2364 42.0 2570

4350 40.5 2419 45.0 2629

3100 42.3 2322 47.0 2524

8700 (C) 47.7 2018 53.0 2193

SRA 155 HPBT OAL = 3.090"

4064 33.8 2197 37.5 2388

2700 34.2 2185 38.0 2375

4350 38.3 2337 42.5 2540

3100 41.4 2336 46.0 2539

8700 (C) 47.7 2220 53.0 2413

.264 WINCHESTER MAGNUM

Gun H&S PRECISION Barrel length 24"

Primer CCI 250 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 140 AMAX OAL = 3.325"

MAGPRO 58.7 2821 65.2 3079

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 31 RIFLE DATA

270 WINCHESTER

Gun HS PRECISION Barrel length 24"

Primer REM 9

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 150 RCBS OAL = 3.250"

8700 54.0 2184 60.0 2374

SRA 90 HP OAL = 3.090"

5744 24.0 2174 40.0 3270

4064 47.7 3179 53.0 3455

2700 51.3 3176 57.0 3452

4350 54.9 3205 61.0 3484

3100 54.9 2877 61.0 3127

HDY 100 SP OAL = 3.175"

5744 24.0 2135 38.5 3100

4064 46.8 3072 52.0 3339

2700 50.4 3073 56.0 3340

4350 54.0 3088 60.0 3356

3100 54.9 2852 61.0 3100

NOS 130 BT OAL = 3.330"

5744 24.5 1950 36.5 2748

4064 43.2 2686 48.0 2920

2700 46.8 2718 52.0 2954

4350 49.5 2778 55.0 3020

3100 54.9 2820 61.0 3065

MAGPRO 58.5 2919 65.0 3234

HDY 140 SBT OAL = 3.330"

5744 25.0 1962 36.0 2621

2700 46.8 2662 52.0 2893

4350 50.4 2749 56.0 2988

3100 54.0 2725 60.0 2962

8700 57.6 2257 64.0 2453

SRA 150 SBT OAL = 3.300"

5744 26.0 1998 35.5 2536

2700 45.0 2519 50.0 2738

4350 47.7 2650 53.0 2880

3100 52.2 2662 58.0 2894

MAGPRO 55.4 2725 61.5 3000

8700 56.7 2329 63.0 2532

.270 WINCHESTER SHORT MAGNUM

Gun WISEMAN Barrel length 24"

Primer WIN WLR Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 100 HP OAL = 2.675"

4350 (C) 61.5 3394 68.5 3696

3100 (C) 60.2 2984 67.0 3350

MAGPRO (C)

70.2 3200 78.0 3545

SRA 130 SPBT OAL = 2.700"

4350 54.1 2950 60.0 3256

3100 (C) 58.4 2870 65.0 3212

MAGPRO (C)

68.0 3062 75.5 3359

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.270 WINCHESTER SHORT MAGNUM (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

BAR 130 X OAL = 2.800"

3100 (C) 57.1 2772 63.5 3093

MAGPRO (C)

66.6 2958 74.0 3287

HDY 140 BTSP OAL = 2.760"

4350 52.9 2865 58.9 3137

3100 (C) 58.0 2811 64.5 3135

MAGPRO (C)

66.8 2985 74.2 3275

SRA 150 SPBT OAL = 2.760"

4350 44.6 2550 49.7 2866

3100 (C) 55.7 2758 62.0 3036

MAGPRO (C)

63.0 2864 70.0 3136

7-30 WATERS

(FLAT POINT BULLETS ONLY)

Gun DOUGLAS Barrel length 24"

Primer REM 9

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 120 FN OAL = 2.530"

2015 29.7 2472 33.0 2687

2230 30.6 2434 34.0 2646

2460 30.6 2405 34.0 2614

2520 33.3 2515 37.0 2734

4064 34.2 2507 38.0 2725

NOS 139 FN OAL = 2.665"

2015 27.9 2211 31.0 2403

2230 30.6 2339 34.0 2542

2460 31.1 2344 34.5 2548

2520 31.1 2274 34.5 2472

4064 32.0 2329 35.5 2532

7x57mm MAUSER

Gun DOUGLAS Barrel length 24"

Primer CCI 200 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 140 SBT OAL = 3.025"

4064 37.8 2468 42.0 2683

2700 42.8 2523 47.5 2742

4350 45.9 2609 51.0 2836

3100 45.9 2356 51.0 2561

NOS 150 BT OAL = 3.060"

4064 36.0 2317 40.0 2519

2700 41.4 2416 46.0 2626

4350 44.1 2504 49.0 2722

3100 45.9 2375 51.0 2581

HDY 175 SP OAL = 3.040"

4064 35.1 2155 39.0 2342

2700 38.7 2209 43.0 2401

4350 42.3 2306 47.0 2507

3100 45.0 2247 50.0 2442

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 32 RIFLE DATA

7mm08 REMINGTON

Gun DOUGLAS Barrel length 24"

Primer CCI 200 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 145 GC OAL = 2.670"

5744 24.3 2110 27.0 2294

(L) 168 GC OAL = 2.735"

5744 24.3 2000 27.0 2174

NOS 120 SP OAL = 2.765"

2015 34.4 2656 38.2 2887

2230 36.3 2656 40.3 2887

2460 36.6 2688 40.7 2922

2520 37.3 2644 41.4 2874

4064 38.7 2721 43.0 2958

2700 41.9 2641 46.5 2871

4350 42.8 2570 47.5 2794

3100 42.8 2298 47.5 2498

SRA 140 SBT OAL = 2.800"

2015 33.3 2483 37.0 2699

2230 35.1 2494 39.0 2711

2460 36.0 2547 40.0 2768

2520 35.6 2484 39.5 2700

4064 37.8 2553 42.0 2775

2700 40.1 2484 44.5 2700

4350 42.8 2579 47.5 2803

3100 42.8 2332 47.5 2535

SRA 150 SBT OAL = 2.800"

2015 32.4 2372 36.0 2578

2230 34.2 2410 38.0 2620

2460 34.5 2415 38.3 2625

2520 35.1 2403 39.0 2612

4064 36.9 2454 41.0 2667

2700 39.2 2424 43.5 2635

4350 41.9 2513 46.5 2731

3100 42.3 2294 47.0 2494

NOS 160 SP OAL = 2.800"

2015 31.5 2245 35.0 2440

2230 32.9 2240 36.5 2435

2460 33.3 2256 37.0 2452

2520 34.2 2259 38.0 2455

4064 36.0 2349 40.0 2553

4350 41.4 2420 46.0 2630

3100 42.3 2256 47.0 2452

REM 175 SP OAL = 2.795"

2015 31.5 2131 35.0 2316

2230 33.3 2183 37.0 2373

2460 33.3 2177 37.0 2366

2520 34.2 2175 38.0 2364

4064 35.6 2179 39.5 2368

2700 37.8 2196 42.0 2387

4350 41.0 2301 45.5 2501

3100 42.3 2164 47.0 2352

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.280 REMINGTON

Gun DOUGLAS Barrel length 24"

Primer REM 9

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 120 SP OAL = 3.200"

2700 47.3 2761 52.5 3001

4350 51.3 2863 57.0 3112

3100 54.0 2783 60.0 3025

BAR 140 X OAL = 3.310"

2700 43.7 2493 48.5 2710

4350 45.9 2554 51.0 2776

3100 51.3 2612 57.0 2839

HDY 154 SP OAL = 3.330"

2700 44.1 2501 49.0 2718

4350 48.6 2599 54.0 2825

3100 52.2 2569 58.0 2792

NOS 160 SP OAL = 3.300"

2700 43.7 2450 48.5 2663

4350 46.8 2523 52.0 2742

3100 51.8 2553 57.5 2775

HDY 175 SP OAL = 3.300"

2700 41.4 2234 46.0 2428

4350 46.4 2376 51.5 2583

3100 51.3 2467 57.0 2681

7mm REMINGTON MAGNUM

Gun OBERMEYER Barrel length 24"

Primer CCI 250 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 120 SP OAL = 3.260"

5744 24.5 2041 47.0 3127

4064 48.6 2906 54.0 3159

2700 55.4 2920 61.5 3174

4350 56.7 2958 63.0 3215

3100 64.2 3059 71.3 3325

8700 71.1 2743 79.0 2982

SRA 140 SBT OAL = 3.270"

5744 27.5 2050 45.5 2948

4064 47.7 2702 53.0 2937

2700 53.6 2755 59.5 2995

4350 54.9 2786 61.0 3028

3100 61.2 2845 68.0 3092

MAGPRO 66.3 2952 73.7 3220

8700 72.0 2555 80.0 2777

SRA 150 SBT OAL = 3.280"

5744 29.5 2066 43.0 2739

4064 46.4 2583 51.5 2808

2700 51.8 2668 57.5 2900

4350 54.9 2731 61.0 2968

3100 59.4 2763 66.0 3003

8700 71.1 2715 79.0 2951

SRA 160 HPBT OAL = 3.270"

MAGPRO 61.7 2737 68.6 3000

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 33 RIFLE DATA

7mm REMINGTON MAGNUM (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 160 SP OAL = 3.280"

5744 30.0 2069 42.5 2679

4064 44.6 2454 49.5 2667

2700 51.8 2559 57.5 2781

4350 51.3 2547 57.0 2768

3100 57.2 2627 63.5 2855

8700 71.1 2698 79.0 2933

NOS 175 SP OAL = 3.275"

5744 31.5 2042 41.5 2513

4064 43.2 2302 48.0 2502

2700 47.7 2375 53.0 2581

4350 50.4 2441 56.0 2653

3100 54.5 2484 60.5 2700

MAGPRO 59.4 2640 66.0 2854

8700 67.5 2534 75.0 2754

7mm WINCHESTER SHORT MAGNUM

Gun Test Barrel Barrel length 24"

Primer WIN WLR Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

WIN 140 JSP OAL = 2.780"

MAGPRO 68.0 2850 76.0 3190

WIN 150 JSP OAL = 2.780"

MAGPRO 66.6 2800 74.0 3070

WIN 160 FS OAL = 2.780"

MAGPRO 64.8 2700 72.0 2975

7mm REMINGTON ULTRA MAG

Gun HS PRECISION Barrel length 26"

Primer REM 9

⁄

M Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 145 OAL = 3.500"

5744 30.0 1971 36.0 2228

(L) 168 FPGC OAL = 3.260"

5744 31.0 1952 40.0 2248

HDY 120 SPHP OAL = 3.595"

3100 79.2 3323 88.0 3612

8700 98.1 3360 109.0 3652

HDY 139 SP OAL = 3.595"

5744 31.0 2046 42.0 2562

3100 77.4 3174 86.0 3450

MAGPRO 86.9 3265 91.5 3462

8700 95.4 3222 106.0 3502

BAR 140 X OAL = 3.595"

5744 32.0 2051 43.0 2544

5744 51.3 2842 57.0 3089

3100 75.6 3140 84.0 3413

8700 94.5 3208 105.0 3487

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

7mm REMINGTON ULTRA MAG (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 150 BT OAL = 3.595"

5744 32.0 2026 43.0 2506

5744 50.4 2795 56.0 3038

3100 74.2 3064 82.4 3330

MAGPRO 84.7 3132 89.2 3324

8700 93.6 3128 104.0 3400

SRA 160 SPBT OAL = 3.595"

5744 33.0 2052 45.0 2529

5744 50.4 2729 56.0 2966

3100 73.4 2968 81.5 3226

MAGPRO 82.7 3033 87.0 3217

8700 91.8 3055 102.0 3321

HDY 175 SP OAL = 3.595"

5744 50.4 2626 56.0 2854

3100 72.0 2823 80.0 3069

MAGPRO 81.2 2909 85.5 3080

8700 92.7 2975 103.0 3234

SWF 175 A-F OAL = 3.595"

3100 69.3 2800 77.0 3043

8700 88.2 2881 98.0 3132

7mm WEATHERBY MAGNUM

Gun DOUGLAS Barrel length 26"

Primer REM 9

⁄

M Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

BAR 120 X OAL = 3.310"

4350 63.9 3205 71.0 3484

3100 68.4 3199 76.0 3477

8700 77.4 2827 86.0 3073

HDY 139 SBT OAL = 3.340"

4350 62.1 3030 69.0 3293

3100 66.6 3048 74.0 3313

8700 73.8 2695 82.0 2929

NOS 150 BT OAL = 3.350"

4350 58.5 2843 65.0 3090

3100 64.8 2943 72.0 3199

8700 73.8 2670 82.0 2902

NOS 160 SP OAL = 3.355"

4350 58.5 2796 65.0 3039

3100 63.5 2858 70.5 3106

8700 72.9 2661 81.0 2892

NOS 175 SP OAL = 3.360"

4350 56.7 2662 63.0 2894

3100 62.1 2738 69.0 2976

8700 72.0 2553 80.0 2775

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 34 RIFLE DATA

.30 M1 CARBINE

Gun DOUGLAS Barrel length 20"

Primer CCI 400 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 125 RN OAL = 1.705"

No. 9 9.9 1627 11.0 1769

5744 12.2 1574 13.5 1711

1680 13.5 1616 15.0 1756

SPR 100 SP OAL = 1.675"

No. 9 12.0 1854 13.3 2015

5744 13.5 1698 15.0 1846

1680 15.3 1695 17.0 1842

SPR 110 FMJ OAL = 1.670"

No. 9 11.3 1742 12.6 1893

5744 13.1 1644 14.5 1787

1680 14.4 1624 16.0 1765

7.62x39mm

Gun HS PRECISION Barrel length 20"

Primer REM 9

⁄

Case IMI

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 110 HP OAL = 2.115"

5744 20.3 2110 22.5 2294

1680 24.8 2343 27.5 2547

2015 25.7 2089 28.5 2271

2230 26.6 2047 29.5 2225

2460 26.6 2018 29.5 2194

SPR 125 SP OAL = 2.195"

5744 19.4 1973 21.5 2145

1680 23.0 2179 25.5 2368

2015 25.7 2124 28.5 2309

2230 26.6 2031 29.5 2208

2460 26.6 2002 29.5 2176

SRA 150 SP OAL = 2.180"

5744 17.6 1748 19.5 1900

1680 20.3 1891 22.5 2055

2015 23.4 1906 26.0 2072

2230 24.3 1818 27.0 1976

2460 24.3 1800 27.0 1956

.30/30 WINCHESTER

(FN/RN BULLETS ONLY)

Gun HS PRECISION Barrel length 20"

Primer CCI 200 Case FED

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 152 RN OAL = 2.450"

5744 20.3 1943 22.5 2112

2015 23.0 1828 25.5 1987

2230 23.4 1815 26.0 1973

2460 24.3 1834 27.0 1994

2495 25.7 1885 28.5 2049

2520 24.8 1844 27.5 2004

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.30/30 WINCHESTER (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 173 FN OAL = 2.550"

5744 19.8 1872 22.0 2035

2015 23.4 1829 26.0 1988

2230 23.4 1798 26.0 1954

2460 24.8 1856 27.5 2017

2495 24.8 1852 27.5 2013

2520 25.7 1889 28.5 2053

SPR 150 FN OAL = 2.540"

5744 22.5 1985 25.0 2158

2015 26.1 2017 29.0 2192

2230 28.5 2091 31.7 2273

2460 29.3 2107 32.5 2290

2495 27.5 2049 30.5 2227

2520 30.2 2139 33.5 2325

4064 29.7 2065 33.0 2245

2700 33.3 2084 37.0 2265

NOS 170 FN OAL = 2.545"

5744 21.2 1838 23.5 1998

2015 24.3 1875 27.0 2038

2230 27.0 1954 30.0 2124

2460 27.2 1949 30.2 2118

2495 26.6 1927 29.5 2095

2520 28.4 1959 31.5 2129

4064 27.0 1837 30.0 1997

2700 31.5 1930 35.0 2098

.30/40 KRAG

Gun DOUGLAS Barrel length 24"

Primer CCI 200 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 165 FNGC OAL = 2.855"

5744 25.2 2022 28.0 2198

(L) 180 RNGC OAL = 2.900"

5744 23.9 1919 26.5 2086

(L) 210 RNGC OAL = 2.925"

5744 22.5 1720 25.0 1870

.308 WINCHESTER

Gun HS PRECISION Barrel length 24"

Primer CCI 200 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 152 RNGC OAL = 2.530"

5744 24.3 2052 27.0 2230

(L) 165 SIL OAL = 2.700"

5744 24.3 1992 27.0 2165

SRA 110 HP OAL = 2.595"

5744 22.1 2040 36.0 2918

2015 40.5 2934 45.0 3189

2230 42.8 2917 47.5 3171

2460 43.7 2938 48.5 3193

2495 42.3 2780 47.0 3022

2520 42.8 2778 47.5 3020

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 35 RIFLE DATA

.308 WINCHESTER (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

NOS 125 BT OAL = 2.780"

5744 24.8 2051 34.5 2753

2015 39.2 2777 43.5 3018

2230 42.3 2776 47.0 3017

2460 42.3 2773 47.0 3014

2495 42.3 2697 47.0 2931

2520 42.8 2719 47.5 2955

HDY 150 SP OAL = 2.745"

5744 27.0 2160 33.5 2551

2015 37.4 2543 41.5 2764

2230 39.2 2495 43.5 2712

2460 40.5 2544 45.0 2765

2495 41.4 2582 46.0 2806

2520 41.9 2584 46.5 2809

4064 41.0 2539 45.5 2760

2700 43.7 2306 48.5 2506

SRA 168 HPBT OAL = 2.800"

5744 28.0 2150 31.5 2376

2015 36.0 2431 40.0 2642

2230 37.8 2401 42.0 2610

2460 38.3 2393 42.5 2601

2495 40.1 2442 44.5 2654

2520 40.5 2495 45.0 2712

4064 38.7 2262 43.0 2571

2700 42.3 2294 47.0 2493

NOS 180 BT OAL = 2.800"

5744 28.0 2117 30.0 2235

2230 36.0 2244 40.0 2439

2460 37.4 2276 41.5 2474

2495 38.7 2385 43.0 2592

2520 40.1 2407 44.5 2616

4064 37.8 2269 42.0 2466

2700 42.3 2272 47.0 2470

NOTE: Some military cases have lower case capacity than

commercial brass cases and may require reduction

of charge weight by 8–12%. Use extra caution when

loading with military brass.

7.62x54mm RUSSIAN

Gun DOUGLAS Barrel length 24"

Primer CCI 250 Case NORMA

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 180 RN OAL = 2.830"

4350 45.0 2244 50.0 2439

3100 47.7 2156 53.0 2343

8700 49.5 1673 55.0 1819

SRA 150 SP OAL = 2.850"

4350 48.6 2459 54.0 2673

3100 49.5 2268 55.0 2465

8700 52.2 1746 58.0 1898

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

7.62x54mm RUSSIAN (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 180 SP OAL = 2.900"

4350 45.9 2297 51.0 2497

3100 49.5 2260 55.0 2457

8700 51.3 1669 57.0 1814

.30/06 SPRINGFIELD

Gun WILSON Barrel length 24"

Primer CCI 200/250 Case IMI

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 152 RN* OAL = 3.035"

5744 30.2 2255 33.5 2451

2015 36.0 2413 40.0 2623

2230 36.9 2379 41.0 2586

2460 36.9 2390 41.0 2598

2495 37.8 2240 42.0 2435

2520 37.8 2375 42.0 2582

4064 41.4 2390 46.0 2598

8700 (C) 54.0 1840 60.0 2000

(L) 180 RN* OAL = 3.015"

5744 28.8 2150 32.0 2337

2015 36.0 2272 40.0 2470

2230 36.9 2228 41.0 2422

2460 36.9 2214 41.0 2406

2495 37.8 2254 42.0 2450

2520 37.8 2219 42.0 2412

4064 40.5 2246 45.0 2441

8700 (C) 54.0 1839 60.0 1999

(L) 210 RN* OAL = 3.195"

5744 27.0 1859 30.0 2021

2015 32.4 2013 36.0 2188

2230 34.2 2011 38.0 2186

2460 34.7 2016 38.5 2191

2495 36.0 2054 40.0 2233

2520 36.0 2053 40.0 2232

4064 38.7 2120 43.0 2304

8700 (C) 54.0 1853 60.0 2014

HDY 110 RN OAL = 2.900"

2015 48.2 3104 53.5 3374

2230 51.3 3114 57.0 3385

2460 52.7 3147 58.5 3421

2495 52.2 3170 58.0 3446

2520 54.0 3161 60.0 3436

4064 (C) 52.2 3129 58.0 3401

2700 55.8 3018 62.0 3280

SRA 125 SP OAL = 3.150"

5744 26.0 2046 42.5 3037

2015 46.8 2934 52.0 3189

2230 48.0 2918 53.3 3172

2460 48.2 2875 53.5 3125

2495 48.6 2962 54.0 3220

2520 48.6 2876 54.0 3126

4064 51.3 3023 57.0 3286

2700 55.8 2939 62.0 3195

4350 (C) 54.0 2661 60.0 2892

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 36 RIFLE DATA

.30/06 SPRINGFIELD (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 150 SP OAL = 3.250"

5744 28.0 2058 41.0 2787

2015 43.2 2651 48.0 2881

2230 44.5 2636 49.4 2865

2460 44.6 2633 49.5 2862

2495 46.4 2674 51.5 2907

2520 46.1 2640 51.2 2870

4064 47.3 2769 52.5 3010

2700 53.1 2697 59.0 2932

4350 (C) 53.1 2590 59.0 2815

3100 (C) 53.1 2401 59.0 2610

MAGPRO (C)

64.6 2841 68.0 2938

SRA 168 HPBT OAL = 3.295"

5744 29.0 2106 38.5 2621

2015 41.0 2493 45.5 2710

2230 41.4 2450 46.0 2663

2460 42.0 2446 46.7 2659

2495 42.3 2490 47.0 2707

2520 42.8 2467 47.5 2681

4064 46.4 2601 51.5 2827

2700 48.6 2513 54.0 2732

4350 (C) 53.1 2599 59.0 2825

3100 (C) 53.1 2405 59.0 2614

SRA 180 HPBT OAL = 3.290"

5744 29.5 2083 37.0 2486

2015 40.1 2381 44.5 2588

2230 39.6 2363 44.0 2568

2460 41.2 2358 45.8 2563

2495 41.0 2387 45.5 2595

2520 42.1 2378 46.8 2585

4064 43.7 2488 48.5 2704

2700 49.5 2434 55.0 2646

4350 (C) 51.3 2498 57.0 2715

3100 (C) 53.1 2402 59.0 2611

MAGPRO (C)

61.7 2673 65.0 2763

NOS 200 SP OAL = 3.295"

2015 37.8 2156 42.0 2343

2230 39.2 2195 43.5 2386

2460 40.1 2235 44.5 2429

2495 38.7 2189 43.0 2379

2520 40.5 2237 45.0 2432

4064 41.4 2277 46.0 2475

2700 46.4 2246 51.5 2441

4350 (C) 49.5 2363 55.0 2569

3100 (C) 53.1 2356 59.0 2561

MAGPRO (C)

58.9 2562 62.0 2669

8700 (C) 55.8 2012 62.0 2187

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.30/06 SPRINGFIELD (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 220 RN OAL = 3.200"

5744 32.5 2058 35.5 2210

2015 37.8 2073 42.0 2253

2230 38.3 2068 42.5 2248

2460 38.7 2087 43.0 2268

2495 38.3 2044 42.5 2222

2520 39.6 2105 44.0 2288

4064 40.5 2130 45.0 2315

2700 44.6 2141 49.5 2327

4350 49.5 2270 55.0 2467

3100 (C) 53.1 2272 59.0 2470

8700 (C) 55.8 1995 62.0 2168

NOTE: Data listed above is for Sierra 220 RN. When

loading for Sierra 220 HPBT, reduce start and

maximum charges by 2 grains each.

NOTE: Some military cases have lower case capacity than

commercial brass cases and may require reduction

of charge weight by 8–12%. Use extra caution when

loading with military brass.

.300 REMINGTON ULTRA MAG

Gun WISEMAN Barrel length 24"

Primer REM 9

⁄

M Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 168 RNGC OAL = 3.475"

5744 22.5 1417 25.0 1540

(L) 180 RNGC OAL = 3.400"

5744 25.0 1604 38.0 2161

NOS 125 BT OAL = 3.600"

5744 45.0 2650 67.0 3578

4064 74.7 3364 83.0 3657

2700 74.7 3342 83.0 3633

4350 85.5 3456 95.0 3757

3100 (C) 88.7 3421 98.5 3719

8700 (C) 104.0 3169 115.5 3445

BAR 150 X OAL = 3.600"

5744 40.0 2340 62.0 3216

4064 66.6 2997 74.0 3258

2700 67.5 2990 75.0 3250

4350 76.5 3122 85.0 3394

3100 (C) 80.1 3110 89.0 3380

8700 (C) 102.6 3180 114.0 3456

NOS 165 BT OAL = 3.600"

5744 39.0 2215 61.0 3092

4064 66.6 2868 74.0 3117

2700 64.8 2854 72.0 3102

4350 74.7 2947 83.0 3203

3100 (C) 81.0 3021 90.0 3284

8700 (C) 101.7 3025 113.0 3288

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 37 RIFLE DATA

.300 REMINGTON ULTRA MAG (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 165 GS OAL = 3.550"

5744 40.0 2277 61.0 3062

4064 63.9 2838 71.0 3085

2700 65.7 2852 73.0 3100

4350 72.5 2972 80.5 3230

3100 (C) 79.2 3025 88.0 3288

MAGPRO 86.9 3115 96.5 3402

8700 (C) 101.7 3099 113.0 3369

SWF 165 A-F OAL = 3.550"

5744 38.0 2184 60.0 3044

4064 63.9 2846 71.0 3093

2700 67.5 2887 75.0 3138

4350 76.5 3014 85.0 3276

3100 (C) 82.8 3088 92.0 3356

8700 (C) 101.7 2978 113.0 3237

HDY 180 SPBT OAL = 3.600"

5744 38.0 2151 59.0 2937

4064 63.9 2775 71.0 3016

2700 66.6 2793 74.0 3036

4350 72.9 2886 81.0 3137

3100 (C) 80.1 2996 89.0 3256

8700 (C) 101.7 2994 113.0 3254

SPR 180 GS OAL = 3.550"

5744 38.0 2134 58.0 2882

4064 64.4 2738 71.5 2976

2700 64.4 2737 71.5 2975

4350 72.0 2857 80.0 3105

3100 (C) 78.3 2927 87.0 3182

MAGPRO 81.0 2951 90.0 3193

8700 (C) 101.7 3040 113.0 3304

SWF 180 A-F OAL = 3.550"

5744 38.0 2111 59.0 2939

4064 61.7 2700 68.5 2935

2700 66.6 2763 74.0 3003

4350 73.8 2866 82.0 3115

3100 (C) 80.1 2949 89.0 3205

8700 (C) 100.8 2934 112.0 3189

NOS 180 PART OAL = 3.600"

5744 38.0 2118 58.0 2892

4064 65.7 2743 73.0 2981

2700 67.1 2766 74.5 3007

4350 73.8 2878 82.0 3128

3100 (C) 80.1 2955 89.0 3212

8700 (C) 101.7 3057 113.0 3323

BAR 180 X OAL = 3.600"

5744 38.0 2063 58.0 2876

4064 63.9 2686 71.0 2920

2700 62.6 2652 69.5 2883

4350 67.1 2703 74.5 2938

3100 (C) 77.4 2876 86.0 3126

8700 (C) 101.7 3023 113.0 3286

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.300 REMINGTON ULTRA MAG (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 200 SP OAL = 3.600"

5744 38.0 2014 56.0 2689

4064 56.7 2448 63.0 2661

2700 58.5 2496 65.0 2713

4350 62.1 2565 69.0 2788

3100 72.5 2702 80.5 2937

8700 95.4 2869 106.0 3119

SPR 200 GS OAL = 3.550"

5744 38.0 2043 56.0 2772

4064 58.5 2499 65.0 2716

2700 60.3 2523 67.0 2742

4350 65.7 2633 73.0 2862

3100 72.9 2725 81.0 2962

8700 (C) 99.0 2902 110.0 3154

SWF 200 A-F OAL = 3.550"

5744 38.0 2024 56.0 2731

4064 57.6 2490 64.0 2706

2700 65.7 2646 73.0 2876

4350 71.1 2703 79.0 2938

3100 77.4 2777 86.0 3018

8700 (C) 99.9 2866 111.0 3115

SRA 220 RN OAL = 3.570"

5744 38.0 1921 57.0 2615

4064 58.5 2381 65.0 2588

2700 60.3 2425 67.0 2636

4350 62.1 2433 69.0 2645

3100 74.7 2651 83.0 2881

8700 (C) 95.4 2732 106.0 2970

.300 WINCHESTER MAGNUM

Gun HS PRECISION Barrel length 24"

Primer CCI 200 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 110 HP OAL = 3.170"

2520 60.3 3231 67.0 3512

2700 70.7 3364 78.5 3656

4350 71.6 3258 79.5 3541

3100 73.8 3145 82.0 3419

HDY 130 SP OAL = 3.300"

2520 56.7 2978 63.0 3237

2700 66.2 3115 73.5 3386

4350 69.3 3108 77.0 3378

3100 73.8 3108 82.0 3378

SRA 150 SP OAL = 3.380"

5744 32.0 2091 52.0 3030

2520 52.2 2722 58.0 2959

4064 55.8 2837 62.0 3084

2700 62.6 2923 69.5 3177

4350 65.7 2892 73.0 3144

3100 68.4 2859 76.0 3108

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 38 RIFLE DATA

.300 WINCHESTER MAGNUM (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 168 HPBT OAL = 3.475"

5744 33.0 2063 51.0 2899

4064 54.9 2735 61.0 2973

2700 60.3 2722 67.0 2959

4350 64.8 2815 72.0 3060

3100 66.2 2709 73.5 2945

SRA 180 SBT OAL = 3.450"

5744 34.0 2097 49.0 2778

2700 59.4 2649 66.0 2879

4350 62.1 2662 69.0 2894

3100 64.8 2667 72.0 2899

8700 77.4 2588 86.0 2813

SRA 200 HPBT OAL = 3.340"

2700 55.8 2481 62.0 2697

4350 57.6 2480 64.0 2696

3100 62.1 2487 69.0 2703

8700 77.4 2527 86.0 2747

SRA 220 RN OAL = 3.300"

5744 37.0 2111 46.5 2497

2700 53.6 2249 59.5 2445

4350 58.5 2392 65.0 2600

3100 60.3 2355 67.0 2560

8700 77.4 2478 86.0 2694

.300 WINCHESTER SHORT MAGNUM

Gun WISEMAN Barrel length 24"

Primer WIN LR Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 150 SP OAL = 2.760"

2700 61.7 2984 68.6 3243

4350 64.1 3039 71.2 3303

MAGPRO (C)

72.5 2946 80.5 3313

SRA 165 SPBT OAL = 2.760"

5744 27.5 1905 30.5 2071

2700 59.6 2846 66.2 3093

4350 61.7 2878 68.5 3128

MAGPRO (C)

70.2 2828 78.0 3223

NOS 165 PART OAL = 2.760"

2700 60.7 2881 67.4 3131

4350 61.0 2890 67.8 3141

SRA 180 SPBT OAL = 2.760"

2700 58.1 2745 64.6 2984

4350 60.8 2782 67.5 3024

MAGPRO (C)

68.3 2733 76.0 3028

SWF 180 A-F OAL = 2.760"

2700 57.6 2722 64.0 2959

4350 58.2 2750 64.7 2989

BAR 180 X OAL = 2.800"

MAGPRO (C)

68.4 2640 76.0 2952

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.300 WINCHESTER SHORT MAGNUM (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 200 GS OAL = 2.760"

2700 54.4 2528 60.4 2748

4350 (C) 53.8 2514 59.8 2733

.300 REMINGTON SHORT

ACTION ULTRA MAG

Gun WISEMAN Barrel length 24"

Primer REM 9

⁄

M Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 165 SP OAL = 2.680"

5744 20.4 1527 30.5 2120

5744 39.6 2612 44.0 2828

SPR 150 SP OAL = 2.800"

4064 54.7 2874 60.8 3191

2700 (C) 60.8 2969 67.5 3253

4350 (C) 61.8 2877 65.0 3060

SRA 165 SPBT OAL = 2.800"

4064 (C) 53.6 2770 59.5 3062

2700 (C) 58.7 2794 65.2 3126

SWF 180 SIR OAL = 2.800"

4064 (C) 50.0 2622 55.5 2870

2700 (C) 54.5 2676 60.5 2954

SPR 200 GS OAL = 2.680"

2700 53.8 2526 59.8 2790

.303 BRITISH

Gun DOUGLAS Barrel length 24"

Primer CCI 250 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 180 RN OAL = 2.930"

5744 25.2 1986 28.0 2159

2015 34.2 2265 38.0 2462

2230 35.1 2262 39.0 2459

2460 36.0 2282 40.0 2480

2495 39.6 2327 44.0 2529

2520 36.0 2252 40.0 2448

4064 39.6 2321 44.0 2523

2700 37.8 2127 42.0 2312

4350 41.4 2118 46.0 2302

3100 41.4 1898 46.0 2063

8700 43.2 1500 48.0 1630

HDY 150 SP OAL = 3.010"

5744 27.9 2220 31.0 2413

2015 36.9 2497 41.0 2714

2230 38.7 2488 43.0 2704

2460 39.6 2510 44.0 2728

2495 41.4 2509 46.0 2727

2520 41.4 2547 46.0 2769

4064 42.8 2535 47.5 2755

2700 43.2 2356 48.0 2561

4350 41.4 2074 46.0 2254

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 39 RIFLE DATA

.303 BRITISH (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 180 SP OAL = 3.000"

5744 26.1 2014 29.0 2189

2015 34.2 2226 38.0 2420

2230 36.0 2274 40.0 2472

2460 36.5 2247 40.5 2442

2495 39.6 2280 44.0 2478

2520 39.6 2363 44.0 2568

4064 40.5 2334 45.0 2537

2700 41.4 2234 46.0 2428

4350 41.4 2098 46.0 2280

3100 41.4 1879 46.0 2042

.32/20 WINCHESTER

Gun MARLIN Barrel length 22"

Primer CCI 400 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 100 SWC OAL = 1.545"

5744 8.4 1107 9.3 1203

SRA 90 JHC OAL = 1.565"

5744 8.7 1123 9.7 1221

HDY 100 XTP OAL = 1.585"

5744 8.6 1134 9.5 1233

.32/40 WINCHESTER

Gun DOUGLAS Barrel length 24"

Primer REM 9

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 170 FNGC OAL = 2.495"

5744 18.0 1658 20.0 1802

HDY 170 FN OAL = 2.575"

5744 18.0 1635 20.0 1777

.32/40 SCHUETZEN

Gun DOUGLAS Barrel length 24"

Primer REM 2

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 200 FN BREECH SEATED

5744 N/A N/A 11.0 1043

5744 N/A N/A 12.5 1138

5744 N/A N/A 14.0 1243

5744 N/A N/A 15.5 1345

8x57mm JS (0.323")

Gun DOUGLAS Barrel length 24"

Primer CCI 250 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 150 SP OAL = 2.940"

2015 42.3 2621 47.0 2849

2230 45.5 2674 50.5 2907

2460 45.9 2674 51.0 2906

2520 47.3 2719 52.5 2955

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

8x57mm JS (0.323") (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 170 RN OAL = 2.855"

2015 41.0 2490 45.5 2707

2230 44.1 2524 49.0 2743

2460 44.1 2510 49.0 2728

2520 45.0 2532 50.0 2752

HDY 220 SP OAL = 2.990"

2015 36.9 2129 41.0 2314

2230 37.8 2112 42.0 2296

2460 39.2 2157 43.5 2345

2520 40.5 2163 45.0 2351

2700 (C) 47.7 2247 53.0 2442

4350 (C) 45.9 2092 51.0 2274

.338 LAPUA MAGNUM

Gun WISEMAN Barrel length 26"

Primer CCI 250 Case LAPUA

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 200 SP OAL = 3.560"

5744 36.0 1959 40.0 2129

2700 79.2 3015 88.0 3277

4350 84.6 3076 94.0 3344

3100 88.2 3057 98.0 3323

SPR 250 GS OAL = 3.550"

2700 70.2 2610 78.0 2837

4350 75.6 2705 84.0 2940

3100 80.1 2724 89.0 2961

MAGPRO 81.0 2672 90.0 2937

NOS 250 PART OAL = 3.560"

2700 69.5 2619 77.2 2847

4350 73.8 2689 82.0 2923

3100 77.6 2707 86.2 2942

SPR 275 SP OAL = 3.555"

2700 68.0 2466 75.6 2680

4350 73.4 2549 81.5 2771

3100 78.3 2588 87.0 2813

SWF 275 A-F OAL = 3.460"

2700 66.6 2455 74.0 2668

4350 69.5 2502 77.2 2720

3100 73.2 2533 81.3 2753

.338 REMINGTON ULTRA MAG

Gun WISEMAN Barrel length 24"

Primer REM 9

⁄

M Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 193 FPGC OAL = 3.310"

5744 25.0 1595 40.0 2185

HDY 200 SP OAL = 3.575"

5744 N/A N/A 40.0 2123

2700 74.3 2866 82.5 3115

4350 81.0 2941 90.0 3197

3100 (C) 85.5 2968 95.0 3226

8700 (C) 100.8 2683 112.0 2916

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 40 RIFLE DATA

.338 REMINGTON ULTRA MAG (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 225 SP OAL = 3.575"

5744 N/A N/A 40.0 2083

2700 72.0 2673 80.0 2905

4350 79.2 2798 88.0 3041

3100 (C) 82.8 2796 92.0 3039

8700 (C) 95.4 2559 106.0 2781

SRA 250 SPBT OAL = 3.575"

5744 N/A N/A 42.0 2113

2700 64.8 2494 72.0 2711

4350 74.3 2631 82.5 2860

3100 (C) 78.8 2645 87.5 2875

8700 (C) 93.6 2472 104.0 2687

SWF 275 A-F OAL = 3.490"

5744 N/A N/A 44.0 2082

2700 59.4 2273 66.0 2471

4350 66.6 2379 74.0 2586

3100 (C) 75.6 2480 84.0 2696

8700 (C) 88.2 2291 98.0 2490

.338 WINCHESTER MAGNUM

Gun HS PRECISION Barrel length 24"

Primer CCI 250 Case FED

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 200 FNGC OAL = 3.200"

5744 28.0 1815 38.0 2302

HDY 200 SP OAL = 3.335"

5744 36.0 2061 52.0 2790

2495 51.3 2582 57.0 2807

2520 56.3 2616 62.5 2843

4064 56.7 2632 63.0 2861

2700 63.5 2666 70.5 2898

4350 65.7 2714 73.0 2950

3100 68.4 2606 76.0 2833

8700 72.0 2119 80.0 2303

HDY 225 SP OAL = 3.340"

2495 48.6 2378 54.0 2585

2520 50.4 2373 56.0 2579

4064 54.5 2486 60.5 2702

2700 59.4 2487 66.0 2703

4350 63.5 2576 70.5 2800

3100 65.7 2467 73.0 2682

8700 71.1 2067 79.0 2247

SRA 250 SBT OAL = 3.340"

5744 38.0 2056 47.0 2466

2495 46.8 2249 52.0 2445

2520 50.4 2276 56.0 2474

4064 52.2 2344 58.0 2548

2700 56.7 2343 63.0 2547

4350 58.5 2379 65.0 2586

3100 63.9 2398 71.0 2607

8700 72.9 2151 81.0 2338

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.338 WINCHESTER MAGNUM (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 275 SSP OAL = 3.330"

5744 40.0 2036 45.0 2258

2495 45.0 2063 50.0 2242

2520 47.7 2112 53.0 2296

4064 49.5 2160 55.0 2348

2700 57.2 2255 63.5 2451

4350 57.6 2262 64.0 2459

3100 61.2 2237 68.0 2432

8700 70.2 2113 78.0 2297

.35 REMINGTON

Gun DOUGLAS Barrel length 24"

Primer CCI 200 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 200 RN OAL = 2.410"

2230 29.3 1756 32.5 1909

2460 30.6 1804 34.0 1961

2520 34.2 1917 38.0 2084

SPR 180 FN OAL = 2.465"

2230 32.9 1896 36.5 2061

2460 33.3 1922 37.0 2089

2520 35.1 1952 39.0 2122

SRA 200 RN OAL = 2.470"

2230 31.5 1823 35.0 1982

2460 33.3 1866 37.0 2028

2520 35.1 1905 39.0 2071

.35 WHELEN

Gun DOUGLAS Barrel length 24"

Primer CCI 200 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 205 RNGC OAL = 3.045"

5744 34.2 2256 38.0 2452

(L) 250 SIL OAL = 3.250"

5744 32.4 1999 36.0 2173

(L) 280 RNGC OAL = 3.050"

5744 30.6 1854 34.0 2015

HDY 200 SP OAL = 3.140"

2015 48.6 2574 54.0 2798

2230 49.5 2487 55.0 2703

2460 51.3 2510 57.0 2728

2520 52.7 2535 58.5 2755

2700 (C) 58.5 2524 65.0 2744

4350 (C) 53.1 2168 59.0 2357

3100 (C) 54.0 1967 60.0 2138

SRA 225 SBT OAL = 3.280"

2015 44.1 2350 49.0 2554

2230 47.3 2367 52.5 2573

2460 48.6 2404 54.0 2613

2520 49.5 2391 55.0 2599

2700 55.4 2393 61.5 2601

4350 (C) 53.1 2217 59.0 2410

3100 (C) 54.0 1992 60.0 2165

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 41 RIFLE DATA

.35 WHELEN (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 250 SP OAL = 3.245"

2015 42.8 2218 47.5 2411

2230 45.9 2235 51.0 2429

2460 46.4 2237 51.5 2432

2520 46.8 2218 52.0 2411

2700 (C) 54.0 2237 60.0 2431

4350 (C) 54.0 2193 60.0 2384

3100 (C) 54.0 1965 60.0 2136

.375 H&H MAGNUM

Gun DOUGLAS Barrel length 25"

Primer REM 9

⁄

M Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 200 FN OAL = 3.375"

5744 40.0 2058 60.0 2902

SPR 235 SP OAL = 3.450"

2520 63.9 2645 71.0 2875

2700 72.0 2649 80.0 2879

4350 (C) 77.4 2608 86.0 2835

3100 (C) 77.4 2362 86.0 2567

HDY 270 SP OAL = 3.570"

5744 43.0 2077 54.0 2489

2700 (C) 72.0 2476 80.0 2691

4350 (C) 75.6 2494 84.0 2711

3100 (C) 77.4 2317 86.0 2519

SRA 300 SBT OAL = 3.585"

5744 46.0 2021 51.0 2217

2700 67.5 2346 75.0 2550

4350 (C) 71.1 2343 79.0 2547

3100 (C) 74.7 2257 83.0 2453

BAR 350 RN OAL = 3.560"

2700 60.3 2078 67.0 2259

4350 (C) 67.5 2167 75.0 2355

3100 (C) 65.7 1938 73.0 2106

.375 REMINGTON ULTRA MAG

Gun WISEMAN Barrel length 26"

Primer REM 9

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

SPR 235 SP OAL = 3.595"

4350 (C) 92.7 2896 103.0 3148

SRA 250 SBT OAL = 3.595"

5744 43.2 1937 48.0 2105

2700 86.4 2777 96.0 3018

4350 (C) 89.1 2793 99.0 3036

NOS 260 PART OAL = 3.565"

2700 81.9 2676 91.0 2909

4350 (C) 86.6 2732 96.2 2970

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.375 REMINGTON ULTRA MAG (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 270 SP OAL = 3.555"

2700 83.7 2646 93.0 2876

4350 (C) 89.1 2706 99.0 2941

SWF 270 A-F OAL = 3.550"

2700 81.0 2606 90.0 2833

4350 (C) 88.2 2705 98.0 2940

HDY 300 RN OAL = 3.570"

2700 81.9 2511 91.0 2729

4350 (C) 87.3 2575 97.0 2799

BAR 300 X OAL = 3.575"

2700 73.8 2392 82.0 2600

4350 (C) 82.8 2471 92.0 2686

.38/55 WINCHESTER

Gun DOUGLAS Barrel length 24"

Primer CCI 300 Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 240 FN OAL = 2.510"

5744 19.8 1473 22.0 1601

2015 28.4 1788 31.5 1943

2495 (C) 34.2 1858 38.0 2020

SRA 200 FN OAL = 2.590"

5744 23.0 1705 25.5 1853

2015 32.4 1961 36.0 2132

2495 (C) 36.0 1874 40.0 2037

HDY 220 FN OAL = 2.580"

5744 21.2 1516 23.5 1648

2015 28.8 1735 32.0 1886

2495 (C) 34.2 1881 38.0 2045

BAR 255 SP OAL = 2.475"

5744 19.4 1277 21.5 1388

2015 26.8 1485 29.8 1614

2495 (C) 32.4 1589 36.0 1727

.416 REMINGTON MAGNUM

Gun DOUGLAS Barrel length 24"

Primer REM 9

⁄

M Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 350 FN OAL = 3.430"

5744 49.5 2086 55.0 2267

BAR 350 X OAL = 3.680"

2015 67.5 2409 75.0 2618

2230 71.1 2433 79.0 2645

2460 71.1 2402 79.0 2611

2520 70.2 2358 78.0 2563

4064 74.7 2337 83.0 2540

2700 (C) 77.4 2333 86.0 2536

4350 (C) 72.0 2043 80.0 2221

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 42 RIFLE DATA

.416 REMINGTON MAGNUM (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 400 RN OAL = 3.580"

2015 63.0 2200 70.0 2391

2230 65.7 2190 73.0 2380

2460 66.6 2192 74.0 2383

2520 67.5 2194 75.0 2385

4064 72.0 2225 80.0 2419

2700 76.5 2247 85.0 2442

4350 (C) 78.3 2253 87.0 2449

.416 RIGBY

Gun DOUGLAS Barrel length 26"

Primer FED 215 Case FED

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 350 FN OAL = 3.480"

5744 49.5 1999 55.0 2173

SPR 400 SP OAL = 3.635"

3100 90.0 2150 100.0 2337

8700 (C) 108.0 1968 120.0 2139

.40/65 WINCHESTER

Gun C. SHARPS Barrel length 36"

Primer WIN WLR Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 260 FN OAL = 2.540"

5744 23.4 1519 26.0 1651

(L) 300 FN OAL = 2.660"

5744 21.6 1394 24.0 1515

2495 38.7 1724 43.0 1874

8700 (C) 54.0 1312 60.0 1426

(L) 350 SP OAL = 2.660"

5744 20.7 1321 23.0 1436

2495 36.0 1627 40.0 1768

8700 (C) 48.6 1155 54.0 1255

(L) 400 SP OAL = 2.830"

5744 20.7 1255 23.0 1364

2495 33.3 1502 37.0 1633

8700 (C) 46.8 1088 52.0 1183

.444 MARLIN

Gun DOUGLAS Barrel length 24"

Primer REM 9

⁄

Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 200 FN OAL = 2.560"

5744 34.2 2047 38.0 2225

(L) 240 SWC OAL = 2.570"

5744 32.4 1887 36.0 2051

HDY 200 XTP OAL = 2.520"

5744 36.0 2113 40.0 2297

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.444 MARLIN (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

SRA 240 JHC OAL = 2.520"

5744 33.3 1903 37.0 2069

HDY 265 FP OAL = 2.570"

5744 31.5 1769 35.0 1923

.450 MARLIN

Gun DOUGLAS Barrel length 24"

Primer CCI 250 Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 300 FN OAL = 2.550"

5744 38.7 1928 43.0 2096

(L) 405 FN OAL = 2.550"

5744 36.0 1716 40.0 1865

SRA 300 FNHP OAL = 2.550"

5744 43.2 2034 48.0 2211

1680 52.2 2198 58.0 2389

2015 (C) 54.9 2217 61.0 2410

2230 58.1 2226 64.5 2420

2460 (C) 60.3 2214 67.0 2407

2495 (C) 59.4 2001 66.0 2175

2520 (C) 56.7 2034 63.0 2211

SPR 350 FNHP OAL = 2.550"

5744 39.4 1813 43.8 1971

1680 46.1 1919 51.2 2086

2015 (C) 50.0 2030 55.5 2207

2230 (C) 55.8 2067 62.0 2247

2460 (C) 55.8 2010 62.0 2185

2495 (C) 54.9 1892 61.0 2057

2520 (C) 55.8 1982 62.0 2154

2700 (C) 55.8 1719 62.0 1869

SPR 400 FN OAL = 2.550"

5744 36.9 1688 41.0 1835

1680 41.4 1732 46.0 1883

2015 47.3 1883 52.5 2047

2230 (C) 49.9 1877 55.4 2040

2460 (C) 54.0 1909 60.0 2075

2495 (C) 49.5 1689 55.0 1836

2520 (C) 53.1 1875 59.0 2038

2700 (C) 53.1 1620 59.0 1761

.45/70 TRAP DOOR SPRINGFIELD—

LEVEL 1

Gun DOUGLAS Barrel length 24"

Primer CCI 200 Case REM NICKEL

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 300 PB OAL = 2.550"

5744 27.9 1469 31.0 1597

(L) 405 PB OAL = 2.560"

5744 24.8 1247 27.5 1355

(L) 500 PBRN OAL = 2.850"

5744 22.5 1112 25.0 1209

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 43 RIFLE DATA

.45/70 TRAP DOOR SPRINGFIELD (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 500 SCHM OAL = 3.010"

5744 22.8 1121 25.3 1219

(L) 530 POST OAL = 2.950"

5744 20.2 1084 22.4 1178

SPR 400 JSP OAL = 2.560"

5744 23.4 1078 26.0 1172

.45/70 GOVERNMENT

(RUGER, MARLIN,

SHARPS, WINCHESTER)

—LEVEL 2

Gun DOUGLAS Barrel length 24"

Primer WIN WLR Case WIN

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 300 PB OAL = 2.550"

5744 34.2 1727 38.0 1877

(L) 378 RN OAL = 2.565"

2015 44.1 1675 49.0 1821

2495 49.5 1780 55.0 1935

4350 54.0 1492 60.0 1622

3100 54.0 1366 60.0 1485

8700 54.0 944 60.0 1026

(L) 405 FN OAL = 2.550"

5744 29.7 1462 33.0 1589

2015 48.6 1532 54.0 1665

2495 48.6 1657 54.0 1801

4350 50.4 1356 56.0 1474

3100 54.0 1308 60.0 1422

8700 54.0 1072 60.0 1165

(L) 500 FN OAL = 2.550"

2015 37.8 1442 42.0 1567

2495 44.1 1536 49.0 1670

2700 42.3 1301 47.0 1414

4350 52.2 1455 58.0 1582

(L) 500 FN OAL = 2.795"

3100 54.0 1374 60.0 1493

8700 54.0 920 60.0 1000

(L) 500 SCHM OAL = 3.010"

5744 28.4 1340 31.5 1456

(L) 530 POST OAL = 2.950"

5744 26.6 1251 29.5 1360

SRA 300 HP OAL = 2.550"

5744 31.5 1568 35.0 1704

2015 53.1 1991 59.0 2164

2495 59.4 2001 66.0 2175

2700 58.5 1784 65.0 1939

4350 63.0 1670 70.0 1815

3100 63.0 1569 70.0 1705

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.45/70 GOVERNMENT (CONT’D)

Powder Start Chg. Velocity Max. Chg. Velocity

HDY 350 RN OAL = 2.550"

2015 47.7 1777 53.0 1932

2495 54.9 1892 61.0 2057

2700 54.9 1650 61.0 1794

4350 58.5 1596 65.0 1735

3100 58.5 1463 65.0 1590

SPR 400 FN OAL = 2.560"

5744 27.9 1319 31.0 1434

2015 44.1 1620 49.0 1761

2495 49.5 1689 55.0 1836

2700 49.5 1479 55.0 1608

4350 (C) 54.0 1444 60.0 1570

3100 (C) 54.0 1336 60.0 1452

8700 (C) 54.0 913 60.0 992

HDY 500 RN OAL = 2.580"

5744 27.9 1369 31.0 1488

2015 36.0 1308 40.0 1422

2495 41.4 1415 46.0 1538

2700 41.4 1221 46.0 1327

HDY 500 RN OAL = 2.795"

4350 52.2 1474 58.0 1602

HDY 500 RN OAL = 2.825"

3100 54.0 1326 60.0 1441

8700 54.0 950 60.0 1033

.45/90 WINCHESTER

Gun WISEMAN Barrel length 30"

Primer CCI 250 Case BELL

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 300 PB OAL = 2.810"

5744 35.1 1637 39.0 1779

(L) 405 PB OAL = 2.910"

5744 31.5 1411 35.0 1534

(L) 500 SCHM OAL = 3.300"

5744 29.3 1300 32.5 1413

.45/110 SHARPS 2

⁄

Gun WISEMAN Barrel length 30"

Primer CCI 250 Case HDS

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 300 PB OAL = 3.300"

5744 39.6 1788 44.0 1944

(L) 405 PB OAL = 3.350"

5744 34.7 1487 38.5 1616

(L) 500 SCHM OAL = 3.750"

5744 33.3 1400 37.0 1522

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

RIFLE DATA 44 RIFLE DATA

.45/120 SHARPS 3

⁄

Gun WISEMAN Barrel length 30"

Primer CCI 250 Case HDS

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 300 PB OAL = 3.700"

5744 45.9 1974 51.0 2146

(L) 405 PB OAL = 3.815"

5744 42.3 1729 47.0 1879

(L) 500 SCHM OAL = 4.075"

5744 39.2 1555 43.5 1690

(L) 570 JONES OAL = 4.000"

5744 36.9 1437 41.0 1562

SPR 400 JFN OAL = 3.700"

5744 41.0 1641 45.5 1784

.458 WINCHESTER MAGNUM

Gun DOUGLAS Barrel length 24"

Primer REM 9

⁄

M Case REM

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 375 RN OAL = 3.000"

5744 46.8 2061 52.0 2240

(L) 400 FN OAL = 3.000"

5744 45.9 1996 51.0 2170

(L) 455 RN OAL = 3.110"

5744 44.1 1860 49.0 2022

(L) 500 RN OAL = 3.170"

5744 42.3 1749 47.0 1901

.50/70 GOVERNMENT

Gun C. SHARPS Barrel length 30"

Primer FED 215 Case DGW

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 425 SP OAL = 2.275"

5744 27.0 1305 30.0 1419

(L) 550 FN OAL = 2.200"

5744 22.5 1111 25.0 1208

.50/90 SHARPS 2

⁄

Gun C. SHARPS Barrel length 30"

Primer FED 215 Case ELDORADO

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 365 FN OAL = 2.870"

5744 38.7 1651 43.0 1795

(L) 440 SP OAL = 3.000"

5744 34.2 1432 38.0 1557

(L) 550 FN OAL = 2.925"

5744 31.5 1298 35.0 1411

(L) 700 SPTZ OAL = 3.125"

5744 31.5 1181 33.0 1246

WARNING: Always start at MINIMUM loads listed above as START CHG. See explanation on page 3.

.50/140 SHARPS 3

⁄

Gun C. SHARPS Barrel length 30"

Primer FED 215 Case ELDORADO

Powder Start Chg. Velocity Max. Chg. Velocity

(L) 440 SP OAL = 3.785"

5744 49.5 1820 55.0 1978

(L) 550 FN OAL = 3.735"

5744 45.0 1597 50.0 1736

.50 BROWNING

Gun FRESHOUR Barrel length 44"

Primer CCI 35 Case IMI

Powder Start Chg. Velocity Max. Chg. Velocity

MIL 642 FMJ OAL = 5.545"

8700 205.2 2696 228.0 2930

MIL 750 FMJ OAL = 5.545"

8700 196.2 2484 218.0 2700

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

Load Bushing Data

NOTE: VERIFY POWDER CHARGE WITH A SCALE

PRIOR TO LOADING

Hornady 366/APEX Presses

SOLO SOLO No. 2 Nitro

Desired 1000 1250 Improved 100

Grains Bushing Bushing Bushing Bushing

13.0 354 366

13.5 360 372

14.0 387 369 375

14.5 393 378 381

15.0 399 384 387

15.5 408 390 393

16.0 411 396 399

16.5 417 402 351 405

17.0 420 408 357 411

17.5 429 414 363 417

18.0 432 420 366 423

18.5 435 426 372 429

19.0 438 429 378 435

19.5 441 435 384 441

20.0 447 441 387 447

20.5 453 447 393 453

21.0 459 453 396 456

21.5 468 456 402 457

22.0 474 459 408 465

22.5 480 465 411

23.0 471 417

23.5 477 420

24.0 480

24.5 486

25.0 492

25.5 495

26.0 501

26.5 502

27.0 510

27.5 513

28.0 516

28.5 522

29.0 525

29.5 531

30.0 537

30.5 —

31.0 543

31.5 549

32.0 555

33.0 558

MEC Single Stage Presses

SOLO SOLO No. 2 Nitro

Bushing 1000 1250 Improved 100

Grains Grains Grains Grains

20 13.9 17.0

21 14.2 18.0

22 14.7 18.7

23 15.0 19.4

24 15.6 20.2

25 16.1 20.5 15.5

26 16.0 17.0 21.6 16.3

27 16.3 17.9 22.6 17.0

28 17.3 18.4 23.5 17.5

29 18.0 19.4 18.3

30 18.8 19.9 19.1

31 19.2 20.5 19.7

32 20.8 21.2 20.3

33 21.4 22.3 20.8

34 22.0 23.1 21.5

35 22.8 23.7 22.3

36 23.3 24.6 23.0

37 23.8 25.2 23.9

38 24.5 26.4

38A 25.3 26.7

39 26.3 28.3

39A 29.1

40 29.6

40A 30.2

41 31.9

41A 32.4

42 33.6

42A 34.4

43 35.5

BUSHING 4100

11 13.5

Ponsness-Warren Presses

SOLO SOLO No. 2 Nitro

Bushing 1000 1250 Improved 100

Letter Grains Grains Grains Grains

D1 12.0 10.7

E 13.7 17.0 11.9

E1 14.0 18.4 12.5

E2 14.5 19.0 13.1

F 14.3 15.5 20.2 13.9

F1 14.5 15.7 20.5 14.1

G 15.9 17.5 22.7 15.6

G1 16.4 17.7 23.0 15.9

H 17.5 19.0 24.5 16.7

I 18.5 19.5 17.2

J 19.7 20.3 17.9

J1 20.4 20.8 18.7

K 20.7 21.4 19.1

L 21.4 22.5 20.2

M 22.1 23.5 20.3

N 23.5 25.0 22.5

O 24.0 25.5 23.0

P 24.6 26.0 23.7

Q 26.3 24.0

R 28.0

S 28.3

T 30.0

U 32.0

V 32.5

MEC Progressive Presses

SOLO SOLO No. 2 Nitro

Bushing 1000 1250 Improved 100

Number Grains Grains Grains Grains

20 13.5 17.0

21 13.9 18.0

22 14.4 18.7

23 14.8 19.4

24 15.5 20.2

25 14.2 16.0 20.5 14.5

26 14.5 16.8 21.6 15.2

27 15.5 17.5 22.6 15.7

28 16.2 18.0 23.5 16.5

29 17.0 18.9 17.3

30 17.4 19.6 17.9

31 19.0 20.1 18.5

32 19.6 21.0 19.0

33 20.2 22.0 19.7

34 21.0 22.6 20.5

35 21.5 23.2 21.2

36 22.0 24.3 22.1

37 22.7 25.0

38 23.5 26.0

38A 24.5 26.5

39 28.0

39A 28.9

40 29.5

40A 30.1

41 31.3

41A 32.0

42 33.0

42A 34.0

43 35.0

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

Load Bushing Data

NOTE: VERIFY POWDER CHARGE WITH A SCALE

PRIOR TO LOADING

LEE AUTO-DISK CAVITIES

Powder 0.30 0.32 0.34 0.37 0.40 0.43 0.46 0.49 0.53 0.57 0.61 0.66

NITRO100 2.2 2.4 2.5 2.7 3.0 3.2 3.4 3.6 3.9 4.2 4.5 4.9

No. 2I 2.9 3.0 3.3 3.5 3.8 4.1 4.4 4.6 5.0 5.4 5.8 6.3

No. 5 4.8 5.1 5.5 5.9 6.4 6.9 7.4 7.9 8.5 9.2 9.8 10.6

No. 7 4.6 4.9 5.2 5.7 6.1 6.6 7.0 7.5 8.1 8.7 9.3 10.1

No. 9 4.6 4.9 5.2 5.6 6.1 6.5 7.0 7.5 8.1 8.7 9.3 10.1

1680 4.6 4.9 5.2 5.6 6.1 6.6 7.0 7.5 8.1 8.7 9.3 10.1

XMR2015 4.1 4.4 4.7 5.1 5.5 5.9 6.3 6.7 7.3 7.8 8.4 9.0

2230 4.6 4.9 5.2 5.6 6.1 6.5 7.0 7.5 8.1 8.7 9.3 10.0

2460 4.6 4.9 5.2 5.6 6.1 6.6 7.0 7.5 8.1 8.7 9.3 10.1

XMR2495 4.0 4.3 4.5 4.9 5.3 5.7 6.1 6.5 7.1 7.6 8.2 8.8

2520 4.4 4.7 5.0 5.4 5.9 6.3 6.7 7.2 7.8 8.4 8.9 9.7

2700 4.4 4.7 5.0 5.4 5.8 6.3 6.7 7.2 7.7 8.3 8.9 9.6

XMR4350 4.1 4.3 4.6 5.0 5.4 5.8 6.2 6.6 7.2 7.7 8.2 8.9

XMR3100 4.0 4.3 4.5 4.9 5.3 5.7 6.1 6.5 7.1 7.6 8.2 8.8

8700 4.4 4.7 4.9 5.4 5.8 6.3 6.7 7.1 7.7 8.3 8.9 9.6

SOLO 1000 2.3 2.4 2.6 2.8 3.0 3.2 3.5 3.7 4.0 4.3 4.6 5.0

XMP 5744 4.0 4.2 4.5 4.9 5.3 5.7 6.1 6.5 7.0 7.5 8.1 8.7

LEE AUTO-DISK CAVITIES—Cont’d.

Powder 0.71 0.76 0.82 0.88 0.95 1.02 1.09 1.18 1.26 1.36 1.46 1.57

NITRO100 5.3 5.6 6.1 6.5 7.0 7.6 8.1 8.7 9.3 10.1 10.8 11.6

No. 2I 6.8 7.3 7.8 8.4 9.0 9.8 10.4 11.3 12.0 13.0 13.9 15.0

No. 5 11.4 12.2 13.2 14.1 15.3 16.4 17.5 18.9 20.2 21.8 23.4 25.2

No. 7 10.9 11.6 12.6 13.5 14.5 15.6 16.7 18.1 19.3 20.8 22.4 24.0

No. 9 10.8 11.6 12.5 13.4 14.5 15.5 16.6 18.0 19.2 20.7 22.2 23.9

1680 10.8 11.6 12.5 13.4 14.5 15.6 16.6 18.0 19.2 20.8 22.3 24.0

XMR2015 9.7 10.4 11.2 12.1 13.0 14.0 14.9 16.2 17.3 18.6 20.0 21.5

2230 10.8 11.6 12.5 13.4 14.5 15.5 16.6 18.0 19.2 20.7 22.2 23.9

2460 10.8 11.6 12.5 13.4 14.5 15.5 16.6 18.0 19.2 20.7 22.2 23.9

XMR2495 9.5 10.2 11.0 11.8 12.7 13.6 14.6 15.8 16.8 18.2 19.5 21.0

2520 10.4 11.1 12.0 12.9 13.9 14.9 16.0 17.3 18.5 19.9 21.4 23.0

2700 10.4 11.1 12.0 12.9 13.9 14.9 15.9 17.2 18.4 19.9 21.3 22.9

XMR4350 9.6 10.3 11.1 11.9 12.8 13.8 14.7 16.0 17.0 18.4 19.7 21.2

XMR3100 9.5 10.2 11.0 11.8 12.7 13.6 14.6 15.8 16.8 18.2 19.5 21.0

8700 10.3 11.1 11.9 12.8 13.8 14.8 15.8 17.2 18.3 19.8 21.2 22.8

SOLO 1000 5.3 5.7 6.2 6.6 7.1 7.7 8.2 8.9 9.5 10.2 11.0 11.8

XMP 5744 9.4 10.0 10.8 11.6 12.6 13.5 14.4 15.6 16.7 18.0 19.3 20.7

LEE DIPPERS

Powder 0.30 0.50 0.70 1.00 1.30 1.60 1.90 2.20 2.50 2.80 3.10 3.40 3.70 4.00 4.30

NITRO100 2.2 3.7 5.2 7.4 9.6 11.9 14.1 16.3 18.5 20.8 23.0 25.2 27.4 29.7 31.9

No. 2I 2.9 4.8 6.7 9.5 12.4 15.3 18.2 21.0 23.8 26.7 29.6 32.5 35.3 38.2 41.0

No. 5 4.8 8.0 11.2 16.1 20.9 25.7 30.5 35.3 40.1 45.0 49.8 54.6 59.4 64.2 69.0

No. 7 4.6 7.7 10.7 15.3 19.9 24.5 29.1 33.7 38.3 42.9 47.5 52.1 56.7 61.2 65.8

No. 9 4.6 7.6 10.7 15.2 19.8 24.4 28.9 33.5 38.1 42.6 47.2 51.8 56.4 60.9 65.5

1680 4.6 7.6 10.7 15.3 19.8 24.4 29.0 33.6 38.2 42.7 47.3 51.9 56.5 61.0 65.6

XMR2015 4.1 6.8 9.6 13.7 17.8 21.9 26.0 30.1 34.2 38.3 42.5 46.6 50.7 54.8 58.9

2230 4.6 7.6 10.7 15.2 19.8 24.4 28.9 33.5 38.1 42.6 47.2 51.8 56.3 60.9 65.5

2460 4.6 7.6 10.7 15.2 19.8 24.4 28.9 33.5 38.1 42.7 47.2 51.8 56.4 60.9 65.5

XMR2495 4.0 6.7 9.4 13.4 17.4 21.4 25.4 29.4 33.4 37.4 41.4 45.4 49.4 53.5 57.5

2520 4.4 7.3 10.3 14.6 19.0 23.4 27.8 32.2 36.6 41.0 45.4 49.8 54.2 58.6 63.0

2700 4.4 7.3 10.2 14.6 19.0 23.4 27.7 32.1 36.5 40.9 45.3 49.7 54.0 58.4 62.8

XMR4350 4.1 6.8 9.5 13.5 17.6 21.6 25.7 29.7 33.8 37.8 41.9 46.0 50.0 54.1 58.1

XMR3100 4.0 6.7 9.4 13.4 17.4 21.4 25.4 29.4 33.4 37.4 41.4 45.4 49.4 53.5 57.5

8700 4.4 7.3 10.2 14.5 18.9 23.3 27.6 32.0 36.4 40.7 45.1 49.4 53.8 58.2 62.5

SOLO 1000 2.3 3.8 5.3 7.5 9.8 12.0 14.3 16.5 18.8 21.0 23.3 25.6 27.8 30.1 32.3

XMP 5744 4.0 6.6 9.3 13.2 17.2 21.1 25.1 29.1 33.0 37.0 41.0 44.9 48.9 52.9 56.8

LEE CHARGE BAR BUSHINGS

Powder .095 .100 .105 .110 .116 .122 .128 .134 .141 .148 .151 .155 .163 .171 .180 .189 .198

NITRO100 11.3 11.9 12.5 13.0 13.8 14.5 15.2 15.9 16.7 17.6 17.9 18.4 19.3 20.3 21.4 22.4 23.5

SOLO 1000 11.4 12.0 12.6 13.2 13.9 14.7 15.4 16.1 17.0 17.8 18.2 18.6 19.6 20.6 21.6 22.7 23.8

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 47 SHOTSHELL DATA

SHOTSHELL DATA

The data that follows was developed in test barrels with a bore diameter of 0.725" for 12-guage.

Some overbored barrels may give different pressures and velocities.

Please note that after setting up your loading machine for the specific combination of components

that you desire, BE SURE TO WEIGH THE INITIAL POWDER CHARGES THROWN BY THE CHARGE

BAR. Because of many variable conditions, seldom does the charge thrown match up exactly with the

charge listed in the load bushing tables. These variations can be caused by humidity changes, bulk density

variations of the powder, and the way each machine is operated. Please use caution when you start

reloading on a specific day or when you change component lots.

12-Ga., 2

⁄

-IN. Winchester Plastic AA-Type Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Grains Grains Grains

Equiv- Velocity, Wad Pressure Pressure Pressure

Lead Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

COWBOY ACTION

⁄

—

1176 WIN 209 FED 12S0 — — 15.0 4000

1232 WIN 209 FED 12S0 — — 16.0 4500

1295 WIN 209 FED 12S0 — — 17.0 5100

1361 WIN 209 FED 12S0 — — 18.0 6100

1160 WIN 209 WAA12SL 17.0 3400 — —

1206 WIN 209 WAA12SL 18.0 3700 — —

1276 WIN 209 WAA12SL 19.0 4700 — —

1336 WIN 209 WAA12SL 20.0 5400 — —

⁄

—

1143 WIN 209 FED 12S0 — — 15.0 4900

1196 WIN 209 FED 12S0 — — 16.0 5700

1263 WIN 209 FED 12S0 — — 17.0 6900

1320 WIN 209 FED 12S0 — — 18.0 7900

1148 WIN 209 WAA12SL 17.0 4100 — —

1203 WIN 209 WAA12SL 18.0 5000 — —

1247 WIN 209 WAA12SL 19.0 5400 — —

1305 WIN 209 WAA12SL 20.0 6200 — —

1—

1107 WIN 209 WAA12SL — — 15.0 5400

1174 WIN 209 WAA12SL — — 16.0 6700

1223 WIN 209 WAA12SL — — 17.0 7400

1275 WIN 209 WAA12SL — — 18.0 8800

1175 WIN 209 WAA 12 17.0 5900 — —

1190 WIN 209 WAA 12 18.0 7200 — —

1221 WIN 209 WAA12 19.0 7300 — —

1271 WIN 209 WAA 12 20.0 8600 — —

⁄

—

1092 WIN 209 WAA12SL — — 15.0 7400

1130 WIN 209 WAA12SL — — 16.0 7900

1184 WIN 209 WAA12SL — — 17.0 9500

1108 WIN 209 WAA 12 17.0 7500 — —

1164 WIN 209 WAA 12 18.0 9300 — —

1194 WIN 209 WAA 12 19.0 9500 — —

1237 WIN 209 WAA 12 20.0 10300 — —

REGULAR TARGET LOADS

⁄

— 1325 CHED 209 WAA12SL 20.5 7200 18.5 7100

CCI 209 WAA12SL 21.0 7100 18.5 7500

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 48 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Winchester Plastic AA-Type Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Grains Grains Grains

Equiv- Velocity, Wad Pressure Pressure Pressure

Lead Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

— 1325

FED209A WAA12SL 20.5 7700 18.0 8000

REM209P WAA12SL 21.0 6800 18.5 6700

WIN 209 WAA12SL 20.5 7900 18.0 7200

FIO 616 WAA12SL 20.5 8200 18.0 7700

CCI209M WAA12SL 20.5 8300 18.0 7300

⁄

— 1445

WIN 209 WAA12SL 22.5 9500 20.5 9800

CHED WAA12SL 22.0 10800

CCI 209 WAA12SL 22.0 11600

FED209A WAA12SL 21.3 10800

REM209P WAA12SL 22.0 9900

⁄

1200

WIN 209 WAA12SL 18.5 8500 16.5 7400

WIN 209 WINDJAMMER 18.5 7700 17.0 6400

WIN 209 CB 2100 18.5 7800 17.0 7000

WIN 209 FED 12S0 18.5 8200 16.5 7900

WIN 209 GRN DUSTER 18.5 7600 16.5 7100

WIN 209 CB 1100 18.5 8500 16.7 6800

WIN 209 REMTGT 19.0 8200 16.8 6700

CCI 209 WAA12SL 19.0 7700 16.8 7400

CCI209M WAA12SL 18.5 8200 16.8 7600

CHED 209 WAA12SL 18.5 8000 16.8 7400

FED209A WAA12SL 18.5 8500 16.8 7600

FIO 616 WAA12SL 18.5 7400 16.8 7300

REM209P WAA12SL 19.0 7800 16.8 6700

CCI 209 HAWK II 19.0 8100 16.8 7500

1 3 1245 CCI209M BLUE DUSTER 19.5 8000 17.3 7900

WIN 209 WAA12SL 19.5 8200 17.3 8200

⁄

1290

WIN 209 WAA12SL 20.0 10300 18.0 9000

WIN 209 TRAPPER 20.0 9000 18.5 8500

WIN 209 CB 1118-12 20.0 9500 18.5 9600

WIN 209 REM TGT 12 20.0 9000 18.0 8700

WIN 209 REM FIG 8 20.0 9300 18.0 8400

WIN 209 FED 12S0 20.0 9900 18.0 9700

CCI 209 WAA12 21.0 9400 18.5 10300

REM209P WAA12 20.5 9600 18.5 10200

FED209A GRN DUSTER 20.5 9800 18.5 10300

FIO 616 WAA12 20.0 9600 18.0 10600

CCI209M WAA12 20.0 9900 18.0 10700

⁄

1350

WIN 209 WAA12SL — — 19.5 10200

CCI 209 GRN DUSTER — — 19.8 9900

FED209A FED 12S0 — — 19.0 10400

⁄

Extra 1125

WIN 209 WAA12 17.5 9000 15.5 8100 17.0 6400

Light

WIN 209 BP 18 17.5 7800 15.5 7900

WIN 209 TRAPPER 17.0 9500 15.5 7000 17.0 5800

WIN 209 VERSALITE 17.0 9300 15.5 7900 16.8 6500

WIN 209 P.C. (Red) 17.5 7900 15.5 7700

WIN 209 CB 2118-12 17.0 8200 15.5 8300

WIN 209 REM TGT 12 17.0 8800 15.5 8400 17.2 6800

WIN 209 REM FIG 8 17.0 8400 15.5 8300 17.2 6000

WIN 209 BLUE DUSTER 17.0 7200 15.5 8200 17.2 6500

WIN 209 FED 12S3 16.5 10300 15.5 7300 17.2 6600

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 49 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Winchester Plastic AA-Type Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Grains Grains Grains

Equiv- Velocity, Wad Pressure Pressure Pressure

Lead Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

Extra 1125

CCI 209 WAA12 17.0 8900 15.5 8700 17.3 6300

Light

CCI 209 CB 2118-12 17.5 7100 15.5 7900 17.2 6000

REM209P WAA12 17.5 7200 15.5 7500 17.6 6000

FED209A WAA12 16.5 9400 15.5 9000 17.2 6300

FIO 616 WAA12 16.5 8500 15.5 9100 17.2 6200

CCI209M WAA12 16.5 8600 15.5 9100 17.2 6800

⁄

1145

WIN 209 WAA12 18.0 9700 16.0 8800 17.7 6900

WIN 209 WAA12SL — — 16.0 8700 17.7 6600

WIN 209 VERSALITE 17.5 9800 16.0 9100 17.2 7600

WIN 209 P.C. (Red) 18.0 9300 16.0 8200 17.8 6200

WIN 209 BP 18 18.0 7900 16.0 8300 17.2 5900

WIN 209 CB 2118-12 17.5 8600 16.5 8400 17.2 5800

WIN 209 HAWK II 17.5 10000 16.0 9100

WIN 209 REM RXP 12 17.5 8900 16.0 8900

WIN 209 REM FIG 8 17.5 8500 16.0 8600

WIN 209 BLUE DUSTER 17.5 8200 16.0 8700

WIN 209 FED 12S3 17.0 10500 16.0 8700

CCI 209 WAA12 18.0 10000 16.0 9700

CCI 209 CB 1118-12 18.0 8200 16.0 9500

REM209P WAA12 18.0 9500 16.0 7800

FED209A WAA12 17.0 9800 16.0 9700

FIO 616 WAA12 17.0 9800 16.0 9200

CCI209M BLUE DUSTER 17.0 9400 16.0 9300

CHED 209 WAA12 17.0 9000 16.5 10400

⁄

3 1200

WIN 209 WAA12 19.0 10800 17.0 9700 21.5 9800

WIN 209 WAA12SL — — 17.0 9900

WIN 209 VERSALITE 18.5 10300 17.0 11200 21.5 9500

WIN 209 P.C. (Red) 19.0 9700 17.5 10000 21.5 9000

WIN 209 BP 18 19.0 9700 17.0 9500 22.0 9500

WIN 209 TRAPPER 19.0 10000 17.0 10400 22.0 8900

WIN 209 REM RXP 12 18.5 10700 17.0 10000 22.5 9000

WIN 209 REM FIG 8 18.5 9800 17.5 9600 22.5 9000

WIN 209 BLUE DUSTER 18.5 10700 17.0 11100 22.0 10300

CCI 209 WAA12 18.5 10500 17.0 10000 23.5 8800

CCI 209 CB 1118-12 19.0 8800 17.0 9600 23.5 8800

REM209P WAA12 18.5 11500 17.0 10100 23.5 9100

FED209A WAA12 19.0 11200 16.5 10900 22.0 9800

FIO 616 BLUE DUSTER 19.0 9400 17.0 10700 22.5 9500

CCI209M WAA12 19.0 9500 17.0 10800 22.5 9900

CHED 209 WAA12 19.5 9900 17.0 10700

⁄

1255

WIN 209 WAA12 — — — — 22.5 10800

WIN 209 VERSALITE — — — — 23.0 10800

WIN 209 P.C. (Red) 20.0 11000 18.5 11100 23.0 10100

WIN 209 BP 18 — — 18.0 10800 23.0 10800

WIN 209 CB 1118-12 20.0 11500 — — 22.5 10200

WIN 209 REM RXP 12 — — 19.0 10500 23.0 10400

WIN 209 REM TGT 12 — — 18.0 11500 22.5 10200

CCI 209 CB 1118-12 20.5 10300 — — 24.0 9500

⁄

1310 WIN 209 WAA12 24.0 11000

WIN 209 REM FIG 8 25.0 10200

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 50 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Winchester Plastic AA-Type Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Grains Grains Grains

Equiv- Velocity, Wad Pressure Pressure Pressure

Lead Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

1310 WIN 209 P.C. (Red) 25.0 10300

WIN 209 CB1118-12 25.0 10300

⁄

1220

WIN 209 WAA12R 23.5 10700

WIN 209 REM SP12 23.0 10300

FED209A WAA12R 23.5 10700

⁄

1275 WIN 209 WAA12R 24.0 11100

12-Ga., 2

⁄

-IN. Winchester Plastic Grey Super Sport

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

— 1325

WIN 209 WAA12SL 21.5 5800 18.5 7200

FED209A CB2100 21.0 6300 18.0 8000

CCI 209 FED 12S0 21.5 5900 17.8 7300

FIO 616 GRN DUSTER 21.0 6100 17.5 8100

CHED 209 WAA12SL 20.5 6900 17.8 7700

⁄

1200

WIN209A WAA12SL 18.7 6000 16.5 7200

FED209A CB2100 18.5 6000 16.2 8100

CCI 209 FED 12S0 19.0 6000 16.8 6900

FIO 616 GRN DUSTER 18.7 7000 16.2 7600

CHED 209 WAA12SL 19.0 6100 16.3 7400

⁄

1290

WIN 209 WAA12SL 20.5 8600 18.3 9100

FED209A VERSALITE 20.0 9200 17.5 10600

CCI 209 TRAPPER 21.0 9000 18.5 8600

FIO 616 GRNDUSTER 20.3 9700 17.8 10500

CHED 209 FED 12SL 20.3 9200 18.0 9500

⁄

1145

WIN 209 WAA12 18.3 8000 16.2 8800

FED209A CB1118-12 18.3 7500 16.0 9700

CCI 209 HAWK II 18.5 7600 16.2 9700

FIO 616 BLUE DUSTER 18.0 8200 16.0 9200

CHED 209 TRAPPER 18.0 8900 16.5 10400

⁄

3 1200

WIN 209 WAA12 19.5 10500 17.0 9700

FED209A CB1118-12 19.0 10300 16.8 9600

CCI 209 HAWK II 19.2 10000 17.3 9500

FIO 616 BLUE DUSTER 19.0 10000 17.0 10000

CHED 209 TRAPPER 19.2 10400 17.0 10000

12-Ga., 2

⁄

-IN. Remington STS



Plastic Target Shells

or Gun Club Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

COWBOY ACTION

⁄

—1281 REM209P FED 12SO + — — 17.0 5500

STS ONE .135" CARD 6400

1344 — — 18.0

7100

⁄

—

1270

REM FED

— — 17.0

209P

STS

12SO

8000

1322 — — 18.0

8500

1367 — — 19.0

9800

1419 — — 20.0

1169 17.0 5600 — —

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 51 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Remington STS



Plastic Target Shells

or Gun Club Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

—

1215 REM FED 18.0 6200 — —

209P

STS 12SO

1281 19.0 7300 — —

1314 20.0 7600 — —

1—

1092

REM FED

— — 15.0 5600

209P

STS 12SO

1150 — — 16.0 6600

1207 — — 17.0 7500

1263 — — 18.0 8500

1100 17.0 5200 — —

1153 18.0 5900 — —

1220 19.0 7200 — —

1270 20.0 8400 — —

⁄

—

1074

REM REM

— — 15.0 6500

209P

STS TGT

1122 — — 16.0 7300

1163 — — 17.0 8100

1236 — — 18.0 10100

1010 15.0 5600 — —

1051 16.0 6100 — —

1110 17.0 7600 — —

—

1146 18.0 8000 —

REGULAR TARGET LOADS

⁄

— 1325

CHED 209 WIN

⁄

GREY 21.0 6700 18.0 8100

CCI 209 REM TGT 21.5 6600 18.5 8000

FED209A REM TGT 20.5 7600 18.0 9000

REM209P REM TGT 21.5 6400 18.0 8100

WIN 209 REM TGT 21.0 7500 18.0 7600

FIO 616 GREEN DUSTER 21.0 6800 18.0 8100

CCI209M REM TGT 21.0 7000 18.0 8000

⁄

— 1435 REM209P REM TGT 23.5 8100 21.0 8100

⁄

1200

REM209P REM FIG 8 20.0 6600 16.5 7600

REM209P REM TGT 12 19.5 7000 16.5 7400

REM209P CB 1100 19.5 6500 16.0 7500

REM209P GREEN DUSTER 18.5 8100 16.0 8000

REM209P TRAPPER 19.0 6700 16.0 8800

CCI 209 REM FIG 8 19.5 6300 16.5 7800

CCI 209 REM TGT 12 20.0 6200 16.5 7900

WIN 209 REM FIG 8 19.0 7100 16.0 7500

WIN 209 REM TGT 12 19.5 7200 16.0 7700

FED209A REM FIG 8 18.5 7500 16.0 8400

FED209A REM TGT 12 18.5 7400 16.0 8300

⁄

1290

REM209P REM FIG 8 21.5 7300 18.0 9300

REM209P REM TGT 12 22.0 7500 18.0 10100

REM209P CB 1100 21.5 7700 18.0 10100

REM209P GREEN DUSTER 21.0 9100 18.0 9900

REM209P TRAPPER 21.0 7900 17.5 10200

CCI 209 REM FIG 8 22.0 7700 18.0 8700

CCI 209 REM TGT 12 22.0 7800 18.0 10200

WIN 209 REM FIG 8 21.0 8600 18.0 9200

WIN 209 REM TGT 12 21.5 8700 18.0 9900

FED209A REM FIG 8 20.5 9000 18.0 10200

FED209A REM TGT 12 20.5 8900 18.0 10900

CCI209M REM FIG 8 21.0 9100 18.0 10000

CCI209M REM TGT 12 21.0 8200 18.0 10400

⁄

Extra 1125 REM209P REM FIG 8 18.0 8300 16.0 6500

Light REM209P REM RXP 12 18.0 8200 16.0 7200

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 52 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Remington STS



Plastic Target Shells

or Gun Club Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

Extra 1125

WIN 209 BLUE DUSTER 18.5 8500 16.0 7400

Light FED209A REM RXP 12 18.0 8900 15.5 7900

CCI209M REM RXP 12 17.5 9600 16.0 6900

⁄

1145

REM209P REM FIG 8 18.5 8400 16.5 7900 18.0 7600

REM209P REM TGT 12 18.5 7200 16.5 8500 18.0 6800

REM209P REM RXP 12 18.5 8800 16.5 9300

REM209P VERSALITE 19.0 7700 16.0 8100 18.0 7000

REM209P P.C. (Red) 18.5 8300 16.5 7200

REM209P BLUE DUSTER 19.0 7600 16.5 7600

REM209P CB 1118 19.0 7600 16.5 7900

REM209P WAA12 19.0 9200 16.5 8600

CCI 209 REM FIG 8 19.0 8300 17.0 7900 18.0 6800

CCI 209 REM TGT 12 19.0 7300 17.0 8000 18.0 7300

CCI 209 REM RXP 12 19.0 7600 17.0 7700 18.0 7300

WIN 209 REM FIG 8 18.5 8200 16.5 7900 18.0 6900

WIN 209 REM TGT 12 18.5 8200 16.5 7800 18.0 7300

WIN 209 REM RXP 12 18.5 8100 16.5 8300 18.0 7100

FED209A BLUE DUSTER 18.5 8500 16.0 8400 18.0 7400

FED209A REM TGT 12 18.5 8700 16.0 8400 18.0 7000

FED209A REM RXP 12 18.5 9200 16.0 9000 18.0 7300

FIO 616 REM FIG 8 18.5 7700 16.5 6900 18.0 6700

CCI209M REM FIG 8 18.5 7000 16.5 7800 18.0 8000

⁄

3 1200

REM209P BLUE DUSTER 20.0 8700 17.5 8900 19.5 7700

REM209P REM TGT 12 20.0 9000 17.5 8700 19.5 8100

REM209P REM RXP 12 20.0 9000 17.5 9400 20.0 8400

REM209P VERSALITE 20.0 9000 17.5 9200 19.2 8100

REM209P P.C. (Red) 20.0 9100 17.5 8700 19.7 7600

REM209P WINDJAMMER 20.5 8100 17.5 7700 19.7 7700

REM209P CB 1118 20.0 8200 17.5 9000 19.5 8400

REM209P WAA12 20.0 8800 17.0 10200 19.5 8500

CCI 209 BLUE DUSTER 20.0 8200 18.0 10000 19.3 8400

CCI 209 REM TGT 12 20.0 8100 18.0 9600 19.3 8400

CCI 209 REM RXP 12 20.0 8000 17.5 9700 19.5 8100

WIN 209 REM FIG 8 20.0 9900 17.5 9400 19.2 8600

WIN 209 REM TGT 12 20.0 9500 17.5 9900 19.0 8400

WIN 209 REM RXP 12 19.5 9800 17.5 9700 19.5 8600

FED209A REM FIG 8 19.5 10000 17.5 9800 19.3 8400

FED209A REM TGT 12 19.5 10000 17.0 9600 19.3 8400

FED209A REM RXP 12 19.5 10500 17.0 10000 19.5 8100

FIO 616 BLUE DUSTER 20.0 9400 17.5 9400 19.2 8600

CCI209M REM FIG 8 20.0 8400 17.5 8900 19.2 8800

⁄

1255

FED209A REM RXP 12 24.0 8900

FED209A P.C. (Red) 24.0 8900

FED209A WINDJAMMER 24.0 10200

⁄

1310

REM209P REM FIG 8 27.5 7700

REM209P REM RXP 12 26.5 8900

REM209P WAA12F114 25.0 8500

REM209P CB 1118 26.0 8500

CCI 209 WAA12F114 26.5 8900

WIN 209 WAA12F114 24.5 10400

FED209A WAA12F114 23.5 10300

⁄

1220 FIO 616 WAA12F114 22.5 9700

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 53 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Remington STS



Plastic Target Shells

or Gun Club Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

1220

CCI209SC WAA12F114 22.5 9400

FED209A WAA12F114 22.5 9800

CCI 209 WAA12F114 22.5 9400

WIN 209 WAA12F114 22.0 10400

12-Ga., 2

⁄

-IN. Federal Gold Medal Plastic Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

COWBOY ACTION

⁄

—

1150 FED209A FED12S0 + 1-135 — — 15.0 4200

1180 FED209A FED12S0 + 1-135 — — 16.0 4300

1250 FED209A FED12S0 + 1-135 — — 17.0 5100

1296 FED209A FED12S0 + 1-135 — — 18.0 5500

1146 FED209A FED12S0 + 1-135 17.0 3900 — —

1217 FED209A FED12S0 + 1-135 18.0 4700 — —

1262 FED209A FED12S0 + 1-135 19.0 5100 — —

1327 FED209A FED12S0 + 1-135 20.0 6200 — —

⁄

—

1079 FED209A FED12S0 + 1-135 — — 15.0 4400

1137 FED209A FED12S0 + 1-135 — — 16.0 4900

1212 FED209A FED12S0 + 1-135 — — 17.0 6000

1269 FED209A FED12S0 + 1-135 — — 18.0 6700

1106 FED209A FED12S0 + 1-135 17.0 4700 — —

1169 FED209A FED12S0 + 1-135 18.0 5500 — —

1213 FED209A FED12S0 + 1-135 19.0 6000 — —

1275 FED209A FED12S0 + 1-135 20.0 6900 — —

1—

1087 FED209A FED 12S0 — — 15.0 5500

1125 FED209A FED 12S0 — — 16.0 5900

1193 FED209A FED 12S0 — — 17.0 6900

1257 FED209A FED 12S0 — — 18.0 7900

1108 FED209A FED 12S0 17.0 5700 — —

1167 FED209A FED 12S0 18.0 6800 — —

1209 FED209A FED 12S0 19.0 7500 — —

1244 FED209A FED 12S0 20.0 7900 — —

⁄

—

1062 FED209A FED 12S0 — — 15.0 6600

1113 FED209A FED 12S0 — — 16.0 7400

1172 FED209A FED 12S0 — — 17.0 8700

1216 FED209A FED 12S0 — — 18.0 9500

1108 FED209A FED 12S3 17.0 7800 — —

1130 FED209A FED 12S3 18.0 7900 — —

1182 FED209A FED 12S3 19.0 8700 — —

—

1223 FED209A FED 12S3 20.0 9600 —

REGULAR TARGET LOADS

⁄

— 1325

CCI 209 FED 12S0 22.5 5900 19.5 6000

FED209A FED 12S0 21.5 7100 18.5 7600

CCI209SC FED 12S0 20.5 7600 19.5 7000

WIN 209 FED 12S0 21.5 7200 19.0 7000

FIO 616 FED 12S0 21.5 7200 19.0 7300

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 54 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Federal Gold Medal Plastic Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

— 1325 CCI209M FED 12S0 21.0 7300 19.0 7100

⁄

1200

FED209A FED 12S3 19.5 7500 17.0 7300

FED209A FED 12S0 19.5 7000 17.5 7400

FED209A BP ITD 19.5 7000 17.5 7100

FED209A REM TGT 12 19.0 6900 17.0 6800

FED209A WINDJAMMER 19.5 6900 17.5 7200

FED209A WAA12SL 19.0 7300 17.0 7000

FED209A GREEN DUSTER 19.5 7000

FED209A ACT T-28 20.5 7500

CCI 209 FED 12S0 20.5 6900 18.5 6500

WIN 209 FED 12S0 20.0 7600 17.5 7400

REM209P FED 12S0 20.0 6700 18.5 6700

FIO 616 FED 12S0 20.0 8200 17.0 7200

CCI209M FED 12S0 19.5 8300 17.0 7100

⁄

1290

FED209A FED 12S3 21.5 9200 19.0 9100

FED209A FED 12S0 21.5 9500 18.5 9000

FED209A BP ITD 21.5 8500 19.0 8100

FED209A REM TGT 12 21.5 8700 18.5 8700

FED209A REM FIG 8 21.5 8500 19.0 8100

FED209A WAA12SL 21.5 9500 19.0 9000

FED209A GREEN DUSTER 22.0 8800

FED209A ACT T-28 22.5 8100

CCI 209 FED 12S0 22.5 8500 20.0 8900

WIN 209 FED 12S0 22.0 9200 19.0 9100

REM209P FED 12S0 22.5 8200 20.0 8900

FIO 616 FED 12S0 22.5 9500 19.0 9300

CCI209M FED 12S0 22.0 9100 19.0 9200

⁄

Extra 1125

FED209A FED 12S3 18.5 7100 16.0 7800

Light

FED209A VERSALITE 18.5 7600

FED209A P.C. (Red) 18.5 7400

FED209A WINDJAMMER 19.0 6500 16.3 7300

FED209A CB 1118 17.5 7400 16.0 7200

FED209A REM FIG 8 17.5 7100 16.5 7100

FED209A UNIWAD 17.5 7100

FED209A BLUE DUSTER 17.5 7200

FED209A ACT TG-30 19.0 8200

CCI 209 FED 12S3 19.0 7300 16.5 6900

WIN 209 FED 12S3 19.0 7900 16.0 6600

REM209P FED 12S3 19.0 7400 16.5 6200

FIO 616 FED 12S3 18.5 7500 16.5 6600

CCI209M FED 12S3 18.5 8100 16.5 6700

⁄

1145

FED209A FED 12S3 19.0 8000 16.5 8300

FED209A FED 12S0 18.5 8100 16.5 8600

FED209A VERSALITE 19.0 8300 16.0 8000

FED209A P.C. (Red) 19.5 8400 16.5 7000

FED209A WINDJAMMER 19.5 7300 16.5 7600

FED209A CB2118 19.0 7700 16.5 7600

FED209A REM FIG 8 19.0 7700 17.0 7700

FED209A BP ITD 18.5 7400 16.5 7800

FED209A BLUE DUSTER 19.0 8400 16.0 7200

FED209A ACT TG-30 19.5 8500 16.5 8700

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 55 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Federal Gold Medal Plastic Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

1145

CCI 209 FED 12S3 19.5 7600 17.5 7000

WIN 209 FED 12S3 19.5 8000 17.5 7200

REM209P FED 12S3 19.5 8000 17.5 7100

FIO 616 FED 12S3 19.0 7800 17.5 7200

CCI209M FED 12S3 19.0 8300 17.5 7400

⁄

3 1200

FED209A FED 12S3 20.0 9700 17.5 8800 22.7 7200

FED209A FED 12S0 19.5 9200 17.5 9500 22.5 7600

FED209A VERSALITE 19.5 9300 17.0 8700 22.5 7500

FED209A P.C. (Red) 20.0 8400 18.0 8300 23.0 6800

FED209A WINDJAMMER 21.0 7900 18.0 8500 22.5 7100

FED209A CB2118 19.5 9300 17.5 8800 22.5 7000

FED209A REM FIG 8 19.5 9000 17.5 8100 23.0 6700

FED209A BP ITD 20.0 8800 17.5 8700 22.5 7000

FED209A BLUE DUSTER 19.5 10000 18.0 8500 22.5 7500

FED209A ACT TG-30 20.5 9600 17.5 9200 22.5 7600

CCI 209 FED 12S3 20.5 8700 18.5 8000 23.0 6400

WIN 209 FED 12S3 20.5 8700 18.5 8500 23.0 7100

REM209P FED 12S3 20.5 8600 18.5 8300

FIO 616 FED 12S3 20.5 8700 18.5 8500 23.0 7300

CCI209M FED 12S3 20.0 9400 18.5 8700 22.5 7100

⁄

1255

FED209A FED 12S3 21.0 10200 18.5 10500 23.5 8000

FED209A VERSALITE 20.5 10200 18.5 10200 23.5 8000

FED209A P.C. (Red) 21.0 9600 19.0 9400 24.0 7500

FED209A WINDJAMMER 22.5 8700 18.5 9100 23.5 7700

FED209A CB2118 20.5 10700 18.5 10100 23.5 7900

FED209A REM FIG 8 20.5 10300 19.0 9600 23.5 7200

FED209A BP ITD 21.0 9700 19.0 10200 24.0 7700

FED209A BLUE DUSTER 20.5 10600 18.5 9700 23.5 7800

FED209A ACT TG-30 22.0 10700 18.5 10600 23.5 7700

CCI 209 FED 12S3 22.0 10200 19.5 9700

WIN 209 FED 12S3 22.0 9700 19.5 10200 23.5 8000

REM209P FED 12S3 22.0 9600 19.0 10000

FIO 616 FED 12S3 22.0 9500 19.5 10200 23.5 7600

CCI209M FED 12S3 21.5 10700 19.5 10900 23.5 7500

⁄

1220

FED209A FED 12S4 23.0 9700

CCI 209 FED 12S4 24.5 8200

WIN 209 FED 12S4 24.0 8800

CCI209M FED 12S4 23.5 9500

⁄

1275 FED209A FED 12S4 25.0 10500

12-Ga., 2

⁄

-IN. Federal Gold Medal Plastic Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

— 1325

CCI 209 FED 12S0 23.0 5800 20.5 6300

FED209A FED 12S0 22.5 6700 19.5 6800

REM209P FED 12S0 23.0 6900 20.5 6600

WIN 209 FED 12S0 21.5 7200 19.5 6400

FIO 616 FED 12S0 21.5 7400 20.0 6400

CCI209M FED 12S0 21.5 7200 20.0 6400

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 56 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Federal Champion Paper Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

1200

FED209A FED 12S3 19.5 6600 17.5 6600

FED209A WAA12 19.5 5500 17.5 6800

WIN 209 FED 12S3 19.5 6500 17.5 6400

FIO 616 FED 12S3 19.5 6800 17.5 6800

CCI209M FED 12S3 19.5 6700 17.5 6500

⁄

1290

FED209A FED 12S3 21.5 9000 19.5 8600

FED209A WAA12 21.0 7500 19.0 8400

WIN 209 FED 12S3 21.5 8300 19.0 8600

FIO 616 FED 12S3 21.5 8600 19.0 8100

CCI209M FED 12S3 21.5 9000 19.0 7900

⁄

1145

FED209A FED 12S4 18.5 8500 16.5 8200

FED209A WAA12 18.5 7900 16.5 7800

FED209A BP TRAP C 19.0 8200 17.0 7800

FED209A HAWK II 18.5 8200 17.0 7600

WIN 209 FED 12C1 19.5 7900 17.0 6700

⁄

3 1200

FED209A FED 12S4 19.5 9800 17.5 9700

FED209A WAA12 20.0 9500 18.0 9000

FED209A BP TRAP C 20.0 9100 18.0 8900

FED209A HAWK II 19.5 8800 18.0 8900

⁄

1255

FED209A FED 12S4 21.0 10800 19.0 11300

FED209A WAA12 21.0 10500 19.0 10000 23.5 7500

FED209A BP TRAP 21.0 10900 19.0 9900 24.5 7800

FED209A HAWK II 20.5 9600 19.0 9500 25.0 7500

⁄

1310

FED209A WAA12F114 26.0 9200

FED209A VERSALITE 25.0 8500

FED209A HAWK II 26.0 8100

⁄

1220

FED209A FED 12S4 24.0 8000

FED209A WAA12F114 24.0 9300

FED209A REM RP12 24.0 8500

CCI 209 FED 12S4 24.5 8300

WIN 209 FED 12S4 24.0 9400

FIO 616 FED 12S4 24.0 9200

CCI209M FED 12S4 24.0 9300

⁄

1275 FED209A FED 12S4 25.0 9700

12-Ga., 2

⁄

-IN. Fiocchi Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

— 1325

CCI209SC BP 078 20.5 7600 18.5 7700

FED209A BP 078 20.0 8100 18.0 8500

WIN 209 BP 078 20.5 8000 18.0 7700

FIO 616 BP 078 20.5 7700 18.5 8100

CCI209M BP 078 21.0 7400 18.5 8000

⁄

1200

FIO 616 FED 12S0 19.5 7800 17.0 8100

WIN 209 FED 12S0 20.0 6500 17.0 7200

REM209P FED 12S0 20.5 6900 17.0 7100

FED209A FED 12S0 19.0 8000 17.0 8500

CCI209M FED 12S0 19.5 7600 17.0 7400

⁄

1290 FIO 616 FED 12S3 21.0 10500 18.5 9900

WIN 209 FED 12S3 20.5 11400 18.5 8800

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 57 SHOTSHELL DATA

12-Ga., 2

⁄

-IN. Fiocchi Target Shells

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

⁄

1290

REM209P FED 12S3 22.0 9700 18.5 8800

FED209A FED 12S3 20.5 10700 18.5 10300

CCI209M FED 12S3 21.0 9900 18.5 8900

⁄

Extra 1125

FIO 616 FED 12S3 18.5 7300 15.5 8000

Light

FIO 616 Super Hawk 18.0 7400 15.5 8000

WIN 209 FED 12S3 18.0 7500 15.5 7300

WIN 209 Super Hawk 17.5 7800 15.5 7300

REM209P FED 12S3 19.0 6100 16.0 7800

REM209P Super Hawk 18.0 7200 16.0 7600

FED209A FIOTL1 18.0 8200 15.5 8800

FED209A Super Hawk 18.0 8300 15.5 8400

CCI209M FIOTL1 19.0 7000 15.5 8000

CCI209M Super Hawk 19.0 7900 16.0 7500

⁄

1145

FIO 616 FIOTL1 19.0 8200 16.5 8100

FIO 616 Super Hawk 18.5 7900 16.0 8100

WIN 209 FIOTL1 18.5 7900 16.5 8300

WIN 209 Super Hawk 18.5 8400 16.0 7900

REM209P FIOTL1 19.5 7300 16.5 8000

REM209P Super Hawk 18.5 7600 16.5 7900

FED209A FIOTL1 19.0 8400 16.5 9300

FED209A Super Hawk 19.0 8600 16.0 9100

CCI209M FIOTL1 19.0 7800 16.5 9100

CCI209M Super Hawk 18.5 8200 16.5 8000

⁄

3 1200

FIO 616 FIOTL1 20.0 9200 17.5 9100 22.0 7400

FIO 616 WAA12 19.5 9000 17.5 9000 22.0 7300

WIN 209 FIOTL1 20.5 7900 17.5 8900 22.0 7600

WIN 209 WAA12 19.5 9900 17.5 9900 22.0 7400

REM209P FIOTL1 20.5 8000 17.5 9100

REM209P REM RXP 20.0 8100 17.5 9000

FED209A FIOTL1 20.0 10900 17.5 10500 22.0 7500

FED209A WAA12 19.0 9600 17.0 9900 22.0 7600

CCI209M FIOTL1 20.0 8800 17.5 10300 22.5 6900

CCI209M WAA12 19.5 8700 17.5 9600 22.5 7200

⁄

1255

FIO 616 FED 12S3 21.5 9100 18.5 10900 23.0 8200

FIO 616 ACT TG-30 21.5 9000 18.5 10800

WIN 209 FED 12S3 21.5 9100 18.5 10700 22.5 8400

FED209A FED 12S3 21.5 9400 22.5 8700

⁄

1310

FIO 616 FIOTL1 24.0 9700

WIN 209 WAA12F114 23.5 10000

WIN 209 FIOTL1 24.0 10000

FED209A FIOTL1 23.5 9500

FED209A WAA12F114 23.5 10000

REM209P WAA12F114 25.0 9100

⁄

1220 WIN 209 WAA12F114 23.0 9900

⁄

1275

FIO 616 WAA12F114 24.5 10600

FIO 616 WAA12R 24.5 9100

CCI209SC WAA12F114 25.0 10600

WIN 209 FED 12C1 24.5 9600

FED209A FED 12C1 24.5 10500

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 58 SHOTSHELL DATA

16-Ga., 2

⁄

-IN. Shotshell Target and Field Loads

Min. Overall Length: Max. Crimp Depth:

⁄

-IN.

⁄

-IN.

SOLO 1000 NITRO 100 SOLO 1250

Dram Approx. Approx. Approx. Approx.

Shell Ounces Primer Wad Grains Grains Grains

Equiv- Velocity, Pressure Pressure Pressure

Brand Lead Type Type Wt. Wt. Wt.

alent Ft./Sec. PSI PSI PSI

FED

⁄

1165

FED209A AA16 + 1-135 16.0 10500 14.5 9700 18.5 8000

FIELD

HI-P

WIN 209 AA16 + 1-135 16.0 9700 15.0 9800 19.0 7400

REM209P SP16 +

⁄

17.5 8800 15.0 8700 20.0 7600

CCI 209 AA16 + 1-135 17.5 9100 15.0 8900 19.0 8500

FED209A BPSP16 18.5 7300

⁄

1220

FED209A AA16 + 1-135 17.0 11100 16.0 10900 19.0 9300

WIN 209 AA16 + 1-135 17.0 11200 16.5 10200 20.0 8300

REM209P SP16 +

⁄

18.0 11500 15.5 10000 22.0 8900

CCI 209 AA16 + 1-135 — — 15.5 10000 20.0 8900

FED209A BPSP16 — — 20.0 8900

⁄

1185 FED209A WAA16 19.5 10600

WIN 209 WAA16 20.0 9500

WIN

⁄

1165

FED209A WAA16 17.0 9200

WIN 209 WAA16 17.0 9500

REM209P WAA16 17.5 7800

CCI 209 WAA16 17.0 7800

⁄

1220

FED209A WAA16 18.5 10600

WIN 209 WAA16 18.5 10700

REM209P WAA16 18.5 9300

CCI 209 WAA16 18.5 10100

⁄

1185 FED209A REMSP16 18.5 10700

WIN 209 REMSP16 19.5 9800

ACTIV

⁄

1165

FED209A AA16 + 1-135 15.0 10500 15.0 10700 17.5 6000

WIN 209 AA16 + 1-135 15.5 10900 15.0 10100 17.5 6000

CCI 209 AA16 + 1-135 15.5 10300 15.5 9600 19.0 6500

⁄

1220

FED209A AA16 + 1-135 20.0 8400

WIN 209 AA16 + 1-135 20.0 8000

CCI 209 AA16 + 1-135 20.0 8300

⁄

1185 FED209A WAA16 19.0 9600

WIN 209 WAA16 19.0 9200

20-Ga., Cowboy Action Loads SOLO 1000 NITRO 100

Approx. Approx. Approx.

Shotshell Ounces Primer Grains Grains

Velocity Wad Pressure Pressure

Brand Lead Type Wt. Wt.

Ft./Sec. PSI PSI

WIN

⁄

1037 WIN 209 WAA20 — — 9.5 7400

AA 990 WIN 209 WAA20 10.4 7100 — —

REM

⁄

1021 REM 209 WAA + 1-135 — — 9.5 7400

STS 1030 REM 209 WAA + 1-135 10.5 7600 — —

FED

⁄

1072 FED209A WAA + 1-135 — — 10.5 7500

HI-P 1042 FED209A WAA + 1-135 11.0 7400 — —

SOLO 1250

20-Ga., 2

⁄

-IN. Shotshell Target and Field Loads

Dram Approx. Grains Approx.

Shotshell Ounces Primer Wad

Equiv- Velocity Solo Pressure

Brand Lead Type Type

alent Ft./Sec. 1250 PSI

Winchester AA

⁄

1155

WIN 209 WAA20 14.0 11400

(one-piece)

8-point crimp

WIN 209 REM RXP 20 14.5 10300

WIN 209 P.C. 20 14.5 9900

⁄

SKEET 1200

WIN 209 P.C. 20 15.5 11800

WIN 209 WAA20F1 15.0 12000

WIN 209 REM RXP 20 15.5 11500

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 59 SHOTSHELL DATA

SOLO 1250

20-Ga., 2

⁄

-IN. Shotshell Target and Field Loads

Dram Approx. Grains Approx.

Shotshell Ounces Primer Wad

Equiv- Velocity Solo Pressure

Brand Lead Type Type

alent Ft./Sec. 1250 PSI

Winchester

⁄

1155

WIN 209 WAA20 17.5 10200

Dove & Quail

(polyformed

with plastic

base wad)

6-point crimp

WIN 209 WAA20F1 17.5 9000

WIN 209 REM RXP 20 17.5 8900

WIN 209 P.C. 20 17.0 9300

WIN 209 WINDJAMMER 16.5 10000

CCI 209 WAA20 16.5 8800

REM209P WAA20 16.5 9300

FED209A WAA20 16.0 9400

⁄

SKEET 1200

WIN 209 WAA20 18.5 10700

WIN 209 REM RXP 20 18.5 10800

CCI 209 WAA20 18.5 10800

REM209P WAA20 18.5 10400

Remington STS

⁄

1155

REM209P REM RXP 20 16.0 10200

(one-piece)

8-point crimp

REM209P REM SP20 16.0 10000

REM209P WAA20 16.0 10800

REM209P WINDJAMMER 16.0 10400

REM209P REM RXP 20 17.0 11200

WIN 209 REM RXP 20 17.0 11400

FED209A REM RXP 20 17.0 11400

Federal

⁄

1155

FED209A FED 20S1 18.0 8900

Hi-Power

and Target

(two-piece

with plastic

base wad)

6-point crimp

FED209A REM RXP 20 18.5 8700

FED209A P.C. 20 18.5 8800

FED209A WINDJAMMER 18.0 9100

FED209A W-28 18.5 8400

CCI 209 FED 20S1 18.5 8900

WIN 209 FED 20S1 18.0 9100

⁄

SKEET 1200

FED209A FED 20S1 19.0 9900

FED209A REM RXP 20 19.5 10400

FED209A P.C. 20 19.5 10100

CCI 209 FED 20S1 19.5 10400

WIN 209 FED 20S1 19.0 10500

ACTIV

⁄

1155

WIN 209 W-28 17.5 8700

Industries

6-point crimp

WIN 209 P.C. 20 18.0 8900

WIN 209 WINDJAMMER 17.5 9200

CCI 209 W-28 18.0 9400

FED209A W-28 17.5 9900

⁄

SKEET 1200

WIN 209 W-28 18.5 10600

WIN 209 P.C. 20 19.0 10400

WIN 209 WINDJAMMER 18.5 10800

CCI 209 W-28 19.0 10400

FED209A W-28 18.5 10300

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 60 SHOTSHELL DATA

28-Gauge Shotshell Target Loads SOLO 1250

Dram Approx. Grains Approx.

Shotshell Ounces Primer Wad

Equiv- Velocity Solo Pressure

Brand Lead Type Type

alent Ft./Sec. 1250 PSI

REMINGTON

⁄

SKEET 1155 REM 209

REM PT 28 13.0 10700

PREMIER

P.C. 12.5 11000

BP Sporting* 12.5 9900

⁄

SKEET 1200 REM 209

REM PT 28 13.5 12000

P.C. 13.5 11900

BP Sporting* 13.0 10400

FEDERAL

⁄

SKEET 1155 CCI 209 BP Sporting* 13.0 11400

FED 28S1 13.0 12500

⁄

SKEET 1200 REM 209 BP Sporting* 13.5 10300

WIN

⁄

SKEET 1155 WIN 209 REM PT 28 12.5 12200

*Note: BP Sporting Wad used with

⁄

oz. No. 9 only.

.410-BORE, 2

⁄

-IN. PLASTIC SHELLS 4100

Shotshell Ounces Velocity, Approx.

Primer Wad Grains*

Brand Lead FPS PSI

FEDERAL OR

⁄

1200

FED209A WAA41 13.5 9400

REMINGTON FED209A REM SP410 13.5 9700

FED209A P.C. 13.5 9600

WINCHESTER AA

⁄

1200

FED209A P.C. 13.5 10700

FED209A REM SP410 13.5 11100

FED209A WAA41 13.5 11200

FED209A FC410SC 13.5 12600

*4100: 13.5 gr requires MEC #11 Bushing.

12-Gauge 2

⁄

" Shotshell Slug Data No. 2 No. 5

Lee Drive Key Slug Improved

Approx. Approx.

Shotshell Slug Wt. Velocity Grains Grains

Primer Wad Pressure Pressure

Brand Ounces Ft./Sec. Wt. Wt.

PSI PSI

ACTIV

⁄

oz. 1501 WIN 209 ACTIV TG-30 + .135 NITRO CARD 25.5 10300 — —

ACTIV

⁄

oz. 1593 WIN 209 ACTIV TG-30 + .135 NITRO CARD — — 40.0 10700

ACTIV 1 oz. 1553 WIN 209 ACTIV TG-30 — — 41.5 10300

Fed G.M.

⁄

oz. 1509 WIN 209 ACTIV TG-30 + .070 NITRO CARD 25.5 9700 — —

Fed G.M.

⁄

oz. 1638 WIN 209 ACTIV TG-30 + .135 NITRO CARD — — 42.0 10200

Fed G.M. 1 oz. 1529 WIN 209 FED 12S3 — — 41.5 9100

Rem STS

⁄

oz. 1466 WIN 209 ACTIV TG-30 22.5 10700 — —

Rem STS 1 oz. 1535 WIN 209 WAASL — — 38.5 10800

WIN AA

⁄

oz. 1492 WIN 209 ACTIV TG-30 25.0 10000 — —

WIN AA

⁄

oz. 1608 WIN 209 ACTIV TG-30 — — 40.0 10800

WIN AA 1 oz. 1494 WIN 209 WAA — — 38.5 9700

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

SHOTSHELL DATA 61 SHOTSHELL DATA

20-Gauge 2

⁄

" Shotshell Slug Data No. 5 No. 7

Lee Drive Key Slug

Approx. Approx.

Shotshell Slug Wt. Velocity Grains Grains

Primer Wad Pressure Pressure

Brand Ounces Ft./Sec. Wt. Wt.

PSI PSI

ACTIV

⁄

oz. 1569 WIN 209 FED 20S1 + .250" FELT WAD — — 32.0 11900

FED TGT

⁄

oz. 1492 WIN 209 FED 20S1 + .250" + .125" 26.0 11900 — —

REM TGT

⁄

oz. 1518 WIN 209 FED 20S1 + .500" CORK WAD — — 30.0 11500

WIN AA

⁄

oz. 1565 WIN 209 FED 20S1 + .250" FELT WAD — — 32.0 11900

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

A QUICK GUIDE TO SHOTSHELL PRIMERS

(Approximately in Increasing Order of Strength)

Abbreviation/Manufacturer/SupplierComments

REM 209P (STS) Remington Arms Corp— A medium primer, well-suited to the Scot propellant line but

may require a slightly higher charge weight of propellant than hotter primers for equal ballistics.

CCI 209 Blount Industries—A medium strength primer. Suitable for use with all Scot propellants. Do not

confuse with the CCI 209M which is hotter.

WIN 209 Olin-Winchester Div.—A medium strength primer. Suitable for use with all Scot propellants.

CHED 209 Cheddite—Very similar to Winchester 209 primers in our testing.

FIO 616 Fiocchi SPA/Italy—A ‘‘magnum’’ strength primer. The 616 is of a slightly larger diameter. It is

suitable for use with all Scot propellants.

CCI209M Blount Industries—A ‘‘magnum’’ strength primer, suitable for use with all Scot propellants. This

primer will produce higher pressures than the CCI 209.

FED209A Federal Cartridge Co.—A ‘‘magnum’’ strength primer developed by Federal as a replacement

for their FED 209. This primer is much more powerful and must not be directly substituted for the FED

209 as excessive pressure will result.

QUICK GUIDE TO WADS AND WAD ASSEMBLIES

Per Shot Similar Wads

Weight

12 GUAGE:

⁄

and 1 oz. WINAA12SL, CB 1100-12, Green duster, Windjammer (long), HAWK II (black), PC

Purple, TGT 12

1 oz. Federal 12S0, CB 2100-12

⁄

oz. WINAA12, WT-12, CB 01118, CB 1118-12, Black Magic, Blue Duster

⁄

oz. Federal-12S3, CB 2118-12

⁄

oz. Remington-Fig8, CB 3118-12

⁄

oz. Windjammer (short), CB 4118-12, PC Red

20 GUAGE:

⁄

oz. WIN AA20, CB 1078-20, Duster-20

28 GUAGE:

⁄

oz. WAA 28, CB 1034-28, Duster-28

410 GUAGE:

⁄

oz. WIN AA41, CB 1050-41, Duster 410, Federal 410 SC, Remington SP 140

/ 18907/ACCURATE ARMS—2003 Loading Manual (01-07-03 17:00:39)

18907$CH01 PDF 2003guide

Navigation menu

Versions of this User Manual:

Views

Navigation