2018 Mf Bldg App 1.2.18
2018-08-22
: 2018 Mf Bldg App 1.2.18 2018_mf_bldg_app_1.2.18 files 2640 data
Open the PDF directly: View PDF 
.
Page Count: 3
Multifamily Energy Efficiency Program
Owner’s Application/Participation Agreement
Mail completed application to: Con Edison Multifamily Energy Efficiency Program, Willdan Energy Solutions, 126 Scott Avenue, Brooklyn, NY 11237
E-mail conEdMultifamily@Willdan.com or fax # 1-212-785-2343. Questions? Call 1-844-316-4288
CUSTOMER INFORMATION
________________________________________________________ __ Owner __Management
Name of entity submitting application
________________________________________________________
Principal contact person name
__________________________________________________________________________________________________
Con Edison customer name
__________________________________________________
Building address City State Zip
__ __ - __ __ __ __ - __ __ __ __ - __ __ __ __ - __
Con Edison electric account number
__________________________________________________
Con Edison account billing address City State Zip
__ __ - __ __ __ __ - __ __ __ __ - __ __ __ __ - __
Con Edison heat/DHW gas account number
CONTACT INFORMATION
Continue on reverse side
Company name
Contact person name (print)
Contact phone
Contact email
Property
management co
Building owner
Superintendent
Other:
BUILDING INFORMATION
1. Affordable Housing Yes No
2. If yes, provide name of regulatory agency or program:
___________________________________________
3. Ownership entity is:
Private (for-profit) Private (non-profit) Public/municipal
4. Property type:
Condominium Co-op Rentals only
5. If property contains rental apartments, please indicate
status (choose all that apply):
Rent-controlled Rent-stabilized Market rate
6. _____ Total number of dwelling units
7. _____ Number of buildings
8. _____ Number of boilers
9. _____ Number of floors (per building)
10. Elevator: Yes No
11. ________Square footage (per building)
12. Year built: _____________
13. Heating fuel source (Check all that apply):
14. Electric meter type:
Firm gas (check here: Con Edison National Grid)
Master metered
Dual fuel
Master metered with sub-meters
Electric
Oil
Direct metered
15. Heating distribution system type: 1-pipe steam 2-pipe steam hydronic I don’t know
111-113 Skillman St LLC
Israel Brody
111-113 Skillman St LLC
111-113 Skillman St Brooklyn NY 11205
111-113 Skillman St Brooklyn NY 11205
64-4040-0313-1304-4
x12
1
7
x
x
Israel Brody 9176133312 israelb@gradusgroup.com
2005
x
x
x
x
Multifamily Energy Efficiency Program
Owner’s Application/Participation Agreement
Mail completed application to: Con Edison Multifamily Energy Efficiency Program, Willdan Energy Solutions, 126 Scott Avenue, Brooklyn, NY 11237
E-mail conEdMultifamily@Willdan.com or fax # 1-212-785-2343. Questions? Call 1-844-316-4288
IDENTIFICATION OF ELIGIBLE MEASURES AND SERVICES
__________________________________ __________________________
Building address City, State, Zip
Authorized representative: Please select the market partner next to the measures and services you are interested in for this service address.
I.
I. I am interested in the measures below:
Measure Type
Market Partner
a.
Survey
1) Common Area Survey – to identify program eligible measures
2) Custom Survey – electric or gas measures not listed below
b. In-unit Direct Install (program will confirm building eligibility)
c. Common Area Measures
1) Measure 1
2) Measure 2
3) Measure 3
II.
AFFORDABLE HOUSING ONLY (program will confirm building eligibility)
□This building was developed and is being maintained as affordable housing. Supporting documentation is attached. (Examples of
acceptable documentation include regulatory agreements or mortgages from any of the following: HUD, HPD, HDC, HFA, NYSDHCR).
□This building has been documented as income-eligible for the NYS Weatherization Assistance Program (WAP).
I request direct installation of the following free common area measures. I understand that these measures
must be directly installed by Willdan or its assigned contractor.
Service Type
Initial
1-Pipe Steam System Retro-commissioning
Building Air Sealing
III.
Direct installation of in-unit measures (program will confirm measure availability)
All residential units may receive up to 10 free LED light bulbs directly installed by the program. The program may also install high-efficiency
faucet aerators and showerheads in participating buildings with Con Edison firm gas accounts. I understand that these measures must be
directly installed by Willdan or its assigned contractor.
I certify that the information in this application is accurate. By signing below and submitting this application, I am authorizing Willdan Energy
Solutions ‘or its assigned contractors to have access to this building for the purposes of providing all program services, including free direct
install services.
See Terms and Conditions on reverse side
Name of authorized owner or building representative
Signature
Date
Con Edison Multifamily Market Partner representative Signature Date
Multifamily Energy Efficiency Program
Owner’s Application/Participation Agreement
Mail completed application to: Con Edison Multifamily Energy Efficiency Program, Willdan Energy Solutions, 126 Scott Avenue, Brooklyn, NY 11237
E-mail conEdMultifamily@Willdan.com or fax # 1-212-785-2343. Questions? Call 1-844-316-4288
ELIGIBILITY REQUIREMENTS AND OTHER TERMS AND CONDITIONS:
1.ELIGIBILITY: Con
Edison’s
Multifamily Energy Efficiency
(MFEE)
Program offers financial incentives for efficiency measures in
c
o
mm
o
n areas and eligible building systems to customers who are property owners or managers
(
cus
t
o
me
r
s)
of multifamily
residences with five or more dwelling units, as well as energy surveys. Customers must receive Con Edison gas and/or electric
delivery service, be in good standing and contribute to the energy efficiency tracker charge
(
EE Tracker
)
. EE Tracker is a New
York State mandated fund for initiatives focused
o
n environmental and other public policy programs such as energy efficiency.
Incentives are available to customers for the purchase
and
installation of
energy-efficiency
measures at the location where the
qualifying project is to be installed. Con Edison will not
o
ffe
r financial incentives and/or rebates for the same eligible measure to
those customers who have received financial incentives or re
b
at
es from the New York State Energy Research and Development
Authority (NYSERDA) and/or another electric or gas utility
c
omp
any.
2.QUALIFYING PROJECTS AND MEASURES: Qualifying projects include electric or gas
energy-efficiency
measures identified as
eli
gib
le for MFEE Program incentives by Con
Edison’s implementation contractor,
Willdan, based on an energy survey of the
building. Qualifying projects do not include any electric or gas
energy-efficiency
measures or ener
gy
-
ef
f
i
c
i
ency
equipment or
services purchased, contracted for, or installed prior to the program start
d
at
e.
3.OWNER APPLICATION/PARTICIPATION AGREEMENT: By signing this Participation Agreement to access the
building’s
Con
E
di
s
o
n energy use for the previous 12-24 months, customer authorizes Willdan or its
subcontractors
to enter this building for the
purposes
o
f
conducting
an energy survey of the
building’s
common area and individual units, installing MFEE Program measures
in individual uni
ts
, installing any
energy-efficiency
measures subsequently agreed to in a Scope of Work, inspecting installed
measures and evaluating
t
he performance of installed
me
asures.
4.INCENTIVE AMOUNTS: The amounts of the incentives for which qualifying projects are eligible are set forth in the program
bro
c
hures.
Con
Edison’s
decision on these issues will be
f
inal. Con Edison reserves the right to change the measures and incentives at any time
throughout the program cycle
5.CUSTOMER WORK AUTHORIZATION AND PROJECT WORK PLAN: Willdan, or its
subcontracted
partners, will meet with the
cus
t
o
me
r
to
discuss individual building objectives, provide information on alternatives, discuss process and create a work
project and
sc
he
d
ule. Willdan, Con
Edison’s implementation contractor,
may select and provide one or more approved
installation
subcontractors
to
c
omp
l
et
e the
measure-installation
work, or the customer may select one or more
contractors
from
an approved list of
participating
c
ont
r
acto
rs. To be included on the approved list, a contractor shall participate in a required
Program Orientation, submit
c
ont
r
acto
r
-
q
uali
f
i
cat
i
o
n forms, provide
documentation
of required insurance, and agree to follow
program guidelines and protocols, including program
reporting
and verification requirements. Willdan may schedule and/or
monitor the required installation services.
6.IMPLEMENTATION OF WORK AND PAYMENT OF INCENTIVES: The customer must pay its share of the cost for each measure
to
be
installed pursuant to the Scope of Work not later than the completion of installation of that measure. When Willdan confirms
that
i
nst
all
at
i
o
n of a specific measure is satisfactorily completed, Willdan will arrange for payment of the incentive for that
measure to
t
he customer, either directly or by Con Edison, or, if authorized to do so by the building owner, directly to the
installation contractor for
t
h
at
measure. Willdan’s
quality-assurance
and/or
quality-control
inspectors and/or Con Edison, in their
sole discretion, may schedule
and
conduct a
post-installation
inspection to ensure satisfactory measure installation. Incentive
checks will be sent approximately six weeks after Willdan confirms satisfactory i
nst
all
at
i
o
n.
7. CUSTOMER INFORMATION: Customer agrees that Con Edison may provide customer information including name,
acco
unt
number, electric and/or gas
consumption
data and electric and/or gas energy savings to its third-party evaluation contractor for
program
evaluation purposes. The evaluation contractor will keep customer information confidential. Customer information may
also
be
provided to the New York State Public Service Commission. Any customer information provided to the New York State
Public Servi
ce
Commission will be aggregated with information about other customers and not personally
id
ent
i
f
ia
bl
e.
8.TAX LIABILITY and CREDITS: Con Edison is not responsible for any taxes which may be imposed on the customer as a
result
o
f
measures installed under this program. Each customer must provide a valid Federal Tax I.D.
num
b
er.
9.DISPUTES: Con Edison will have sole discretion to decide on the final resolution of any issues including but not limited to
eligibility
o
r i
ncent
ives.
10. PROGRAM CHANGES: Con Edison reserves the right to change, modify, or terminate this program at any time without any
lia
bi
li
ty
except as expressly stated herein. Con Edison will honor all written
commitments
made in Scope of Work provided to
customers
pr
i
o
r to the date of any change,
modification
or termination of this program, provided that project installations are
fully completed within
t
he time specified in the Scope of
Work.
11. PROGRAM EXPIRATION: This program will expire December 31, 2018, when funds are depleted, or when the program is
te
r
mi
na
t
e
d
, whichever comes
f
ir
st
.
12. DISCLAIMER: Con Edison and Willdan its implementation contractor, make no representations or warranties, expressed or
implied, and do not guarantee that i
mp
l
ementat
i
o
n of
energy-efficiency
measures or use of the equipment purchased or
installed pursuant to this program will result in ener
gy
-
c
ost
savings. Accordingly, Con Edison recommends that all customers
consider engaging qualified engineers or other qualified
c
o
nsul
ta
n
ts
to evaluate the risks and benefits, if any, of such
implementation
and use on energy
consumption,
cost savings, or operation of
customers’ facilities.
13.INSTALLATION REQUIREMENTS: All work must be in full compliance with the requirements of applicable laws, rules, and regulations
of authorities having governmental and regulatory jurisdiction. Work must be performed by subcontractors or participating contractors
approved by Willdan and Con Edison for participation in the MFEE Program. Additionally, work must be completed within 45 days of
the commitment execution date on the Owner’s Agreement document. In the removal of old equipment the applicant confirms that as a
requirement of the program, the owner or any subcontractor carrying out installation of measures under this program shall remove and
dispose of any and all equipment or materials that are replaced or removed in accordance with all applicable la
w
s, rules, and
regul
at
i
o
ns. If these requirements are not met, Con Edison may cancel and decommit the incentive funds from the project.
