21559 21759 Inst

2017-08-22

: 21559-21759-Inst 21559-21759-inst images 714 p4dbimg

Open the PDF directly: View PDF PDF.
Page Count: 1

1 pc.
Step 1: Place the Chair Back (I) on a
padded surface, and assemble the chair
Seat (G) to the chair Back as shown,
using the 1-3/4" long Bolt (A), in the
middle of the back, and the Washers as
shown. Install the 3-1/4" long Bolts (D),
using the same washers, into the back
corners of the Chair Seat. Do not fully
tighten any Bolts until after chair has
been completely assembled.
Step 2: Assemble the Front Legs (H) to
the Chair Seat using the 2-1/4" long
Bolts (E), and the same washers as
before.
G
Front Legs
Seat
1 pc.2 pcs.
21559 & 21759
Diamond Back Side Chair
H I
Be sure to check all packing material
carefully for small parts, which may have
come loose inside the carton during
shipment. Separate, count and check all
parts against the Components and
Hardware List above. Failure to use the
correct length bolts in the proper
locations may result in an unsafe product
and could also cause damage to the parts
being assembled.
Components and Hardware List (for one chair)
Made in Viet Nam
Page 1 of 1
Corinne
Dining Room
Assembly Instructions
I
G
Riverside
FURNITURE
email: info@riverside-furniture.com
4 pcs.
1 pc. 9 pcs.
1 pc.
A B C
D E F
4 pcs.
Chair Back
9 pcs.
5mm Allen Wrench
5/16
Allen-Head Bolt
5/16
Allen-Head Bolt
5/16
Allen-Head Bolt
5/16" Flat
Washer
5/16" Spring
Washer
D
B
C
F
E
B
C
FStep 3: Set the assembled Chair upright on a
flat surface to level chair. Reach underneath
the Chair Seat and tighten all Bolts using
the Allen Wrench (F).

Navigation menu