Product Brochure Wireless Digital Media Player MP115 MP115NA 21series

User Manual: Wireless Digital Media Player MP115 MP115NA

Open the PDF directly: View PDF PDF.
Page Count: 7

for Cranes and
Industrial Applications
for Cranes and
for Cranes and
Wireless Controls
WIRELESS CONTROL SYSTEMS
At Remtron, “Gorilla Tough” is not just our slogan, it’s our promise!
TESTIMONIALS
“…to our disbelief the
box kept on working.
We appreciate the
quality of your
products..”
Steven Teipel
Manager of Plant
Operations, Earle M.
Jorgensen Company
“You have succeeded in
providing us with the
best possible answer to
our problem.”
Tony Blaszak
Boeing, Portland Plant
“Despite being crushed by a
forklift, our transmitter
kept right on working!”
The Best Value Backed by the Best Warranty!
Our customers rely on our equipment to be simple to use, easy to main-
tain and trouble free for many years. After all, if our equipment
fails, your production stops. When that happens you lose revenue that
can easily exceed many times the amount of your wireless control invest-
ment. So we designed our equipment to be durable, reliable and
easy to maintain and we back it up with best support in the industry.
• UNCONDITIONAL WARRANTY
• “Gorilla Tough” Durability
• 24 Hours/7 Days a Week Technical Support
Reliable and Safe
Best Value means reliable and safe service. Remtron equipment is
specifically designed to handle critical industrial and construction tasks.
• 900 MHz Reliability
• Advanced Packet Data Coding for Reliable Communications
• Cyclic Redundancy Code (CRC) for Positive Command Verification
• Control Time Outs to protect against inadvertent commands
• Programmed Fail-Safe Monitors protect against failures of
transmission or equipment.
Low Maintenance and Long Life
Best Value also means low cost of ownership and long life. Remtron
equipment is designed to reduce maintenance and lower service cost.
• Industry’s longest battery life
- Over 135 hours of continuous operation
• Standard or rechargeable AA batteries
• 1-2 day service turn around
• Lowest service cost in the industry
• 1,000,000-cycle rocker and rugged case durability
• 15 Year product life support
2
CRANE CONTROLS
The PATRIOT -
Economical, Off-the-Shelf 3 Motion/2 Speed System ............ 4
Application Systems -
Full Featured Systems ...................................................... 5
Bellybox Transmitters ......................................................... 6
HandHeld Transmitters ........................................................ 7
Control Receivers .................................................................. 8
GENERAL INDUSTRIAL CONTROLS
Transmitters/Receivers
Great for Conveyors, Pumps, Gates, E-Stops .................................................... 9
ACCESSORIES
Hydraulic Brake Kit and DC Crane System, Safe-T-Range,
Wireless Control Systems Programmer, Leather Holsters,
and Straps ............................................................... 10
SPECIFICATIONS
Speci cation Chart ....................................................................... 11
Standard Crane & Hoist Systems
3
MODEL 25S15
MODEL 25S15
DESIGNED FOR
5 MOTION/2 SPEED
• UNCONDITIONAL WARRANTY
• LOW COST OF OWNERSHIP
• SUPERIOR FACTORY SUPPORT
• BUILT-IN 6 FT. WIRE HARNESS
• 100% MADE & SUPPORTED
IN THE USA
4
Crane Control
IN THE USA
MODEL 25S11
DESIGNED FOR
3 MOTION/2 SPEED
Remtron presents the Patriot®
The most affordable, high quality wireless crane
controls available. 100% American made and supported, the
Patriot® is offered in two models, both of which use Remtron’s
proven Command Pro® technology. Both systems are shipped
ready to install with a six foot long wiring harness and include
our exclusive extruded aluminum receiver enclosure. Best
of all, the Patriot series transmitters come with a One Year
Unconditional Warranty!
5
• Unconditional 2 Year Warranty
MODEL 1814
DESIGNED FOR
3-MOTION/
2-SPEED CRANES
• SUPPORTS VFD, PLC
CONTACTOR-BASED CONTROLS
• 2-STEP PUSH BUTTONS
• A/B/BOTH PUSH BUTTON FOR
TROLLEY/HOIST SELECTIONS
APPLICATION SYSTEMS
MODEL 2014
LARGER TRANSMITTER FOR
3-MOTION/2-SPEED CRANES
• OPTIMAL FOR USE WITH HEAVY GLOVES
• SUPPORTS VFD, PLC AND CONTACTOR-
BASED CONTROLS
• 2-STEP PUSH BUTTONS
• A/B/BOTH PUSH BUTTON FOR TROLLEY/
HOIST SELECTIONS
MODEL 2322
POWERFUL CRANE CONTROL SYSTEM:
• UP TO 3-MOTION/5-SPEED
CONTROLS
• 3-MOTION/3-SPEED STEPPED CON-
TROLS
• ALLOWS DIRECT SELECTION OF SPEEDS
FOR ACCURATE CONTROL
• A/B/BOTH PUSH BUTTON FOR TROLLEY/
HOIST SELECTIONS
3-MOTION/
POWERFUL CRANE CONTROL SYSTEM:
MODEL 1008
VERSATILE AND ECONOMICAL
CONTROL SOLUTION FOR:
• 3-MOTION/1-SPEED CRANES
• 2-SPEED MONORAILS
• HOISTS
• Quality You Can Rely On.
Systems
67
Crane Control Transmitters
BELLYBOX STYLE
TRANSMITTER FEATURES
• LOW POWER CONSUMPTION FOR LONG
BATTERY LIFE – UP TO THREE MONTHS
ON AA BATTERIES
• RUGGED CASES HOLD UP TO INDUSTRIAL
DEMANDS
• EASY-TO-USE “PUSH-TO-OPERATE” (PTO) BAR
• SELF-TEST LED PROVIDES TRANSMITTER AND
BATTERY STATUS
•
EMBEDDED ANTENNA PREVENTS BREAKAGE
• OPTIONAL UL 913 RATING FOR CLASSIFIED
ENVIRONMENTS.
MODEL 21T54
ENVIRONMENTS.
MODEL 21T54
MODEL 21T54
TWO-STEP MODELS
SINGLE-STEP MODELS
MODEL
21T18
MODEL
21T20
MODEL
21T10
MODEL
21T23
HANDHELD STYLE
TRANSMITTER FEATURES
• LOW POWER CONSUMPTION FOR LONG
BATTERY LIFE – TYPICALLY ONE TO TWO
MONTHS ON AA BATTERIES
• INTERNAL ANTENNA PREVENTS BREAKAGE
• SELF-TEST LED PROVIDES TRANSMITTER
AND BATTERY STATUS
• RUGGED CASE, MADE FROM ADVANCED
COMPOSITES, HOLDS UP UNDER TOUGH
INDUSTRIAL DEMANDS
• INCLUDES LEATHER HOLSTER FOR ADDED
PROTECTION
• LONG-LIFE SWITCHES WITH TACTILE-FEEDBACK
• OPTIONAL
UL 913 RATING FOR CLASSIFIED
ENVIRONMENTS.
MODEL
21T14
MODEL
21T20
MODEL
21T23
MODEL 21T34
UL 913 RATING FOR CLASSIFIED
MODEL
21T14
MODEL 21T44
MODEL 21T46
• Customizable to Any Application • 2 Year Unconditional Warranty
8
Control Receivers
RECEIVER OPTIONS
• FIRST COME-FIRST SERVE (FCFS) AND
PITCH & CATCH ALLOW ONE OR MORE
RECEIVERS TO BE CONTROLLED BY UP
TO SIX TRANSMITTERS (AVAILABLE
ON R22 AND UP)
• RECEIVER REMOTE ANTENNA KIT
• OPTIONAL NEMA 7/8 ENCLOSURE FOR USE
IN CLASSIFIED ENVIRONMENTS.
RECEIVER FEATURES
• NEMA 4 PACKAGE, EASY TO INSTALL
• COMPATIBLE WITH CONTACTOR OR
VFD SYSTEMS
• REDUNDANT SAFETY CIRCUITS PREVENT
FALSE MOVEMENTS
• EASY “SCREWDRIVER” MAINTENANCE,
NO EXTRA TEST EQUIPMENT NEEDED
• TRANSFER SWITCH (EXCLUDES R08)
• UL 508 APPROVED
Customizable to Any Application
MODEL 22R08ES MODEL 21R14 MODEL 21R22
General Purpose Controls
TRANSMITTER FEATURES
• INTERNAL ANTENNA PREVENTS BREAKAGE.
• LEATHER HOLSTER FOR ADDED PROTECTION.
• TEST LED PROVIDES TRANSMITTER AND
BATTERY STATUS.
• LOW POWER CONSUMPTION FOR LONG
BATTERY LIFE.
• RUGGED CASE MADE FROM ADVANCED
COMPOSITES HOLDS UP TO INDUSTRIAL
AND COMMERCIAL DEMANDS.
Great for Conveyors, Pumps, Gates, Doors, Lights, Emergency Stops
RECEIVER FEATURES
• NEMA 4 PACKAGE.
• EASY “SCREWDRIVER MAINTENANCE”,
NO EXTRA TEST EQUIPMENT.
• TWO-PIECE TERMINAL STRIP SIMPLIFIES
INSTALLATION AND SERVICE.
• STATUS LED INDICATORS PROVIDE EASY
IN-FIELD FAULT ISOLATION
AND DIAGNOSTICS.
• CHOICE OF 12 VDC, 24 VDC, 120 VAC OR
240 VAC POWER SUPPLIES.
• UL 913 RATING FOR CLASSIFIED
ENVIRONMENTS.
• WATERPROOF RECEIVER ENCLOSURE
22T04P 22T04 22T08ES22T08
9
22T09
The General Purpose Command Pro product line is
suited for rugged, industrial applications where a
few functions are needed in a heavy duty radio. This
product series is microprocessor-based and can be
programmed to perform a multitude of tasks involv-
ing logic, momentary and latched relay functions.
The Remtron Safety Stop Control System is
designed to provide the means for an operator to
remotely stop electrical equipment in times of
Emergency. These Systems are designed for control
of industrial machinery and are built to survive the
wear and tear of life in factories, mills and foundries.
A supplement to the hard wired E-stop on equipment,
the Safety Stop Control System is added safety in
your workplace.
22R04/22R08
10
Accessories
RBK1A BRAKE KIT
The RBK1A air-over-hydraulic brake kit con-
verts any manually operated cab-type foot
brake for overhead bridge cranes to pendant or
remote control operation. Designed for years of
trouble-free operation, this kit parallels a foot
actuated hydraulic brake. Available for all types
of cranes, the three-step RBK1A is backed by
Remtron’s experience and reliable customer
support. Stepless brake kits are also available.
WIRELESS CONTROL
SYSTEMS PROGAMMER
All Remtron systems can be easily
programmed in the field without the
necessity of hard-to-use dip switches. Both the
operating frequency and the unit address are
contained in a simple 6-character ID code.
RAC16A Handheld Programmer
Completely portable and small enough to
fit in your tool pouch. The RAC16A quickly
changes ID codes and some simple set-up
parameters. It also transfers complete set-up
information from a fixed computer site to a
receiver. For most applications this is the only
programmer needed.
RAC17 PC-based Programmer
Operating under the Windows® environment,
the RCA17 provides large facilities a conve-
nient method to maintain set-up information
on systems under their control. Each file
contains the equipment type, ID code and
set-up parameters. If a spare transmitter or
receiver is needed, the file for that particular
equipment can be opened and the informa-
tion simply downloaded into a spare unit.
Reconfigure Command Pro radio remote
control systems in minutes.
Change ID codes and set-up configurations
right in the field.
Portable and PC-based programmers
available.
•
•
•
RAC17
RAC16A
LEATHER HOLSTER
Safe-T-Range keeps the operator within
a pre-determined distance from the crane,
thus increasing safety in the work place.
Using an advanced spot antenna design along
with programmable logic, a Safe-T-Range
equipped receiver draws an electronic bound-
ary around the crane. The system then safely
stops and inhibits selected functions when the
operator steps outside the boundary. We
do all this without shutting down the main line.
•
Electronic boundary range adjustable
from 30’ to 200’.
Works with any 21 series transmitter
and available on R22-based receivers.
•
®
Rugged leather holsters and
straps are included as standard
equipment with all Remtron 21 and
22 Series handheld transmitters.
The holsters make it convenient to
operate the transmitter while on your
belt. Shoulder straps are included as
standard equipment with all Remtron
21 Series level style transmitters.
11
Specifications
Receivers
Transmitters
Systems
Receivers:
• 120/240 VAC
• 12/24 VDC OPTIONAL POWER (EXCEPT PATRIOT)
• TUNED ELEMENT ANTENNA WITH TNC CONNECTOR.
Systems:
• 902-928 MHZ, 81 FREQ.
(FCC LICENSE-FREE OPERATION)
• 300 FT. RANGE
• 60 MILLISECONDS RESPONSE TIME
• -20° TO 160°F OPERATING TEMP.
• SELF TEST LED INDICATORS
• NEMA 7 & 8 ENCLOSURES AVAILABLE
1916 W. Mission Road
Escondido, CA 92029-1114
(800) 328-5570 • Fax: (760) 737-7810
http://www.remtron.com
Distributed By:
At Remtron, “Gorilla Tough” is not just our slogan, it’s our promise!
Background
Remtron was established in 1984 to provide rugged radio controls for the material handling and
commercial industries. Our rugged technology is based on merging of our founder’s experience in the
design of highly reliable aerospace wireless control systems with research done by Motorola. Remtron
acquired Motorola’s design criteria for the safe and reliable wireless control of heavy industrial equipment.
Facility
Engineering, production, customer service and sales are integrated under one roof at our 25,000 square ft. facil-
ity in Escondido, CA. Virtually all manufacturing is performed in-house, allowing tight controls on quality and
workmanship. Remtron is able to combine standard product production with production of custom or engineered
systems to meet our individual customer’s needs. Remtron has delivered over 25,000 wireless control systems to
customers around the world.
Service
Our record of repeat customers is the best testimony to our dedication to customer support. Remtron provides
continuing support to over 3,000 companies in hundreds of applications throughout many industries. Our support
includes a 24/7 technical support line, turnaround repair time of 1-2 days and refurbishment at the lowest rates
in the industry. Remtron continues to provide parts and repair services to the equipment we produced 15 years
ago. This shows our long-term commitment to our customers and their needs.
GORILLA TOUGH!
WIRELESS CONTROL SYSTEMS

Navigation menu