2257 English 1381514239
2014-04-29
: 2257-English 1381514239 2257-english--1381514239 images 512 p4dbimg
Open the PDF directly: View PDF 
.
Page Count: 1
INSTALLATION INSTRUCTIONS
Item#2257 (New. 05/25/2013)
READ AND SAVE THESE INSTRUCTIONS
WAR NI N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig.1
Fig. 2
MOUNTING THE FIXTURE (Fig. 1)
1. Shut off the power at the fuse box or circuit breaker.
If necessary, remove the old fixture including the
mounting hardware.
2. Carefully remove the fixture from the carton and
check that all parts are included as shown in the
illustration.
3. Thread screws (A) into the pre-drilled holes in the
circular strap (B) spaced the same distance apart as
the holes in the back plate of the fixture body (E) and
secure with hex nuts (C).
4. Attach the circular strap (B) to the junction box using
the mounting screws (D) (size: #8-32N*L0.5”). The
side of circular strap (B) marked “GND” must face
out.
5. Install the bulb(s) (not included) in accordance with
the fixture’s specifications. (DO NOT EXCEED THE
MAXIMUM WATTAGE RATING!) (NE PAS
DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
CONNECTING THE WIRES (Fig. 2)
6. At this point, connect the electrical wires as shown in
figure 2, making sure that all wire connectors are
secured. If your outlet box has a ground wire (green
or bare copper), connect the fixture’s ground wire to
it. Otherwise, connect the fixture’s ground wire
directly to the circular strap using the green screw
provided. After wires are connected, tuck them
carefully into the ceiling junction box.
COMPLETING THE INSTALLATION (Fig.1)
7. Align the fixture body (E) onto screws (A) and secure
it with cap nuts (F).
8. Secure glass shade (H) to fixture body (E) with ball
nuts (G).
Your installation is now complete. Return power to the
junction box and test the fixture.
Note: Illustration (Fig. 1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
LA-2338E
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
Set# A-022
- Circular strap
- Ground screw
- Mounting Screw*2
E
F
A
B
C
D
G
H
