28LF92EES_SM_00 Vers 28LF92E

User Manual: 28LF92E

Open the PDF directly: View PDF PDF.
Page Count: 92

Download28LF92EES_SM_00 Vers 28LF92E
Open PDF In BrowserView PDF
28LF-92EES

SERVICE MANUAL
SE0028LF92S00
Issued: 19th April 2004

AK- 45 CHASSIS

MODEL

28LF-92EES

In the interests of user safety (required by safety
regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.

In order to service the model 28LF-92EES, refer
to the AK-45 Chassis Service Manual
(SE00AK45CHA00).

CONTENTS
ELECTRICAL SPECIFICATIONS ........................................................................................ 3
IMPORTANT SERVICING NOTES ...................................................................................... 4
CONTROLS & TERMINALS ................................................................................................ 5
PRINTED WIRING BOARD LAYOUT ................................................................................. 7
PARTS LISTING ................................................................................................................... 8
HOW TO UPDATE THE TECHNICAL INFORMATION ...................................................... 15

SHARP CORPORATION
1

This document has been published to
be used for after sales service only.

28LF-92EES

SERVICE MANUAL UPDATE LOG SHEET
Technical Report No.
Technical Bulletin No.

Cause / Solution

Part No.

Page No.

Application
Data /Serial No.

Use this page to keep any special servicing information as Technical Report (Bulletin), Technical Information, etc.
If only part number changes are required, just change part number directly the part number in the Parts Listing Section.
If you need more information, please refer to the Technical Report (Bulletin).

2

28LF-92EES

ELECTRICAL SPECIFICATIONS
•Picture Intermediate frequency
L’ ................................................ 33.9MHz
L, B/G, D/K,I .............................. 38.9MHz

•Power Input .................... 220V-240 Volts AC 50 Hz
•Power Consumption
Normal Operation (Method IEC60107) ............... 90 W
Stand-by Operation .......................................... < 4 W

•Sound Carrier Trap
L’ ................................................ 40.4MHz
L, D/K ......................................... 32.4MHz
B/G ............................................ 33.4MHz
I .................................................. 32.9MHz

•Audio Power Output Rating (MPO) / Impedance
Internal Left Speaker ................................. 10 W, 7 Ω
Internal Right Speaker ............................... 10 W, 7 Ω

•Adjacent Sound Carrier Trap
L’ ................................................ 32.4MHz
L, D/K, B/G ................................ 40.4MHz
I .................................................. 40.9MHz
•Adjacent Picture Carrier Trap
L’ ................................................ 41.9MHz
L, D/K, I ...................................... 30.9MHz
B/G ............................................ 31.9MHz

•Speakers
2 ways speaker elliptic (2 pcs) ............ 50 x 120 mm
•Convergence (Maximum Misconvergence)
○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

7

○

2

○

○

○

○

○

1

•Aerial Input Impedance
VHF/UHF ................. 75 ohm Unbalanced

○

10

○

○

○

○

○

9

0

○

6

•Tuning Ranges ..... 45.75MHz thru 855.25 MHz
VHF: IR A - J / S1 - S41 CH (Hiperband)
E2 - E12 / F2 - F10
UHF: I21 - I69 CH / E21 - E69

v

○

11

V

○

○

○

○

○

○

○

12

○

○

○

○

○

5

8

3

○

○

○

○

4

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

Measuring points

misconvergence

○

○

H

○

○

h

○

○

c

Admissible misconvergence in X - and Y - direction (mm)

Centre

0

Corner points

1;2;3;4

1.8

Medium points

9 ; 10 ; 11 ; 12

1.4

0.4

H

( 2h = H )

270

V

( 2v = V )

140

right, left

5;6

1.2

10

top, bottom

7;8

1.2

○
○

○

○

c

○

○

○

○

○

○

○

Distance of measuring points (mm)

○

○

○

Position of measuring points on the screen

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

•White Level
Apply the rated voltage at the rated frequency to the TV set, while it is receiving full white pattern RF signal of 60
dB/µV from its RF input via the pattern generator.
Turn all picture controls to maximum value. Measure the colour temperatures at the center of the screen by
using the colour analyzer.
X=0.290 ± 0.015
Y=0.300 ± 0.015

Specifications are subject to change without prior notice.

MODEL DESTINATION (Operation Manual Languages)
28LF-92EES: Español, Português.

WARNING
The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug
and power receptacle, when servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel.

3

28LF-92EES

IMPORTANT SERVICING NOTES
Only qualified service personnel are allowed to carry out maintenance and repair of this receiver.

Servicing of High Voltage System and CRT
It is important that the static charge is removed from the high voltage system when carrying out work on the
receiver. This can be achieved by connecting a 10K resistor (with a suitably insulated lead) from the CRT
cavity connector to the CRT ground tag. This must be carried out with the AC supply disconnected from the
receiver.
Note the following:
• The CRT in this receiver employs Integral Implosion Protection.
• If the CRT has to be changed it MUST be replaced with the correct type for continued safe working.
• DO NOT lift the CRT by its neck.
• When handing the CRT, ensure that shatterproof goggles are worn.
• Ensure that the CRT is discharge before handling.

X-Ray
This receiver is designed to keep any x-ray emission to an absolute minimum. Some fault conditions and
servicing procedures may produce potentially hazardous x-ray radiation levels. This is a problem when in
close proximity to the receiver for long periods of time. To reduce any risks associated with this, please
observe the following precautions:
1. When undertaking any servicing on this chassis, DO NOT increase the EHT to more than 30 KV, (at a
instantaneous beam current of 1800 µA).
2. Ensure that during normal operation the EHT does not exceed 28,15 KV (at a beam current of 1800 µA).
This level has been preset in the factory. Always check that this level has not been exceeded after
carrying out any repair on the receiver.
3. DO NOT replace the CRT with any other type than that specified in the parts listing as this may cause
excessive x-ray radiation.

Before returning the receiver to the customer
In addition to the above checks, the following should also be carried out before returning the receiver to the
customer.
1. Inspect all the leads to ensure that they are dressed correctly and that they are not obstructed or pinched
by any other parts.
2. Ensure that all protective devices are in good condition. These will include nonmetallic control knobs,
insulating fish papers, cabinets backs, compartment covers or shields, mechanical insulators, etc.

4

28LF-92EES

CONTROLS & TERMINALS

&+

&+

69,'(2 9,'(2 /6*,5'''
$8',2

69,'(2 9,'(2 /6*,5'''
$8',2

VIDEO

Speakers (left + right)

AUDIO L (L/S/G/I) = Audio left

= Power On / Off
= Volume -/+
CH

FRONT PANEL

AUDIO R (R/D/D/D) = Audio right

= Headphone 3,6 mm Ø

= Program -/+

S-VIDEO

REAR TV
RF Input
1. Aerial terminal

( ;7

21-pin In/Out

(;7

2. 21-pin Audio/Video (RGB) (AV-1) With
PAL/SECAM/NTSC Video Input
3. 21-pin Audio/Video (AV-2) With
PAL/SECAM/NTSC Video Input



5





28LF-92EES

REMOTE CONTROL



= Stand By
= Cursor Up
= Cursor Right
OK = OK
= Info (Program Menu)
0 - 9 = Direct Program
-/-- = Double Digit
= Wide mode button
P/CH+ = Program +
+ = Volume +
= TV / Quit Menu
(;7 = EXT button

(EXT-1, RGB, EXT-2, F-AV, SVHS)
Yellow = Feature Menu
Blue = Installation Menu
= Hold


= Update
= Index Page
= Reveal
= Expand





= Mix
= Teletext
= Time
Red = Sound Menu
Green = Picture Menu
= Mute
I-II = Mono/Stereo - Dual I-II
= - Volume
- P/CH = -Program
= Flash back button






M = Menu
= Cursor Down
= Cursor Left

6

28LF-92EES

CHASSIS LAYOUT
Mother Unit

CRT Unit

Control Panel Unit

7

28LF-92EES

PARTS LISTING
REPLACEMENT PARTS
Replacement parts which have special safety characteristics are identified in
this manual. Electrical components having such features are identified by
in the Replacement Parts Listing.
The use of a substitute replacement part which does not have the same safety
characteristics as the factory recommended is not permitted.
Replacement parts not shown in this service manual may create shock fire, or
other hazards.

HOW TO ORDER REPLACEMENT PARTS
To have your order completed promptly and correctly please supply the following information.
1. MODEL NUMBER
2. REF. NO.
3. PART NO. (*)
4. DESCRIPTION
5. CODE
6. QUANTITY
(*) When ordering any part, a “V” should be added before the Part No.
(*)

REF No.

PARTS DESCRIPTION

SN CODE EX CODE

.
.

PICTURE TUBE
30016948 28" CPT TUBE 16:9 50HZ REAL FLAT
30029092 28" 16:9 RF DEG COIL&EARTH CB. WO/UL S

CK
AL

DF
AX

TU200

TUNER
30009637 TUNER WSP (PLL) 38.9 MK2 - BATCH

AR

BC

IC1
IC100
IC100
IC101
IC101
IC102
IC103
IC104
IC106
IC116
IC200
IC201
IC206
IC301
IC500
IC502
IC600
IC601
IC700
IC704
IC900
IC901
IC902

30001665
30015087
30001669
30001622
30018063
30001668
30001668
30001500
30011968
30001506
30019492
30001619
30021083
30016113
20152368
20142752
30007793
30001506
30013658
30001518
30018768
30014346
30014346

INTEGRATED CIRCUITS
IC LM358N
IC SAFE OPTOCOUPLER TCET1102G
PREAMPLIFIER TFMS1380
IC 7805 (1A)
IC HT48RA0A OTP
IC LM317T
IC LM317T
IC LM7808
IC SMPS MC44608 DIP8
IC TL431
IC VDP3134Y
IC VIDEO SWITCH TEA6415C DIP20
IC TDA9886T/V3-SO24
IC AAMP TDA7269A 2*14W MULTIWATT11
PR.IC.45-SHARP 1.2.77-L.1
IC 24C16 V054L5314A00000110812
IC STV9379FA
IC TL431
IC MSP3410G SDIP64
IC TDA1308
IC TDA6109
IC 78L05 TO-92 (100mA)
IC 78L05 TO-92 (100mA)

AA
AA
AD
AB
AF
AC
AC
AC
AF
AC
AP
AM
AL
AH
AS
AB
AK
AC
AS
AE
AK
AA
AA

AE
AE
AM
AF
AR
AH
AH
AH
AQ
AH
BA
AY
AX
AV
BD
AF
AW
AH
BD
AP
AW
AE
AE

Q1
Q100
Q102
Q103
Q106
Q107
Q108
Q109
Q110
Q112
Q113
Q114
Q2
Q200
Q201
Q202

30001452
30001453
30001386
30001454
30001454
30001428
30001457
30001457
30001384
30001458
30001457
30001457
30001453
30001457
30001457
30001457

TRANSISTORS
TR BC327
TR BC337
TR MTP6N60E (PLASTIC)
TR BC548B
TR BC548B
TR BF423
TR BC848B SMD
TR BC848B SMD
TR MCR22-6
TR BC858B SMD
TR BC848B SMD
TR BC848B SMD
TR BC337
TR BC848B SMD
TR BC848B SMD
TR BC848B SMD

AA
AA
AE
AA
AA
AA
AA
AA
AB
AA
AA
AA
AA
AA
AA
AA

AC
AC
AP
AC
AC
AC
AC
AC
AG
AB
AC
AC
AC
AC
AC
AC

8

REF No.
Q203
Q208
Q216
Q218
Q220
Q221
Q222
Q223
Q3
Q4
Q500
Q501
Q502
Q503
Q504
Q505
Q508
Q511
Q513
Q600
Q601
Q602
Q603
Q605
Q606
Q700
Q703
Q704
Q900
Q901
Q902
Q903
Q904
Q905
Q906

PARTS
30001457
30001457
30001457
30001458
30001457
30001457
30001457
30001457
30001453
30001452
30001457
30001457
30001457
30001457
30001457
30001458
30001457
30001457
30001458
30001429
30001435
30001441
30001458
30001458
30001458
30001458
30001458
30001457
30001427
30001458
30001458
30001458
30001458
30001458
30001452

DESCRIPTION
TR BC848B SMD
TR BC848B SMD
TR BC848B SMD
TR BC858B SMD
TR BC848B SMD
TR BC848B SMD
TR BC848B SMD
TR BC848B SMD
TR BC337
TR BC327
TR BC848B SMD
TR BC848B SMD
TR BC848B SMD
TR BC848B SMD
TR BC848B SMD
TR BC858B SMD
TR BC848B SMD
TR BC848B SMD
TR BC858B SMD
TR BUK444-200A
TR NBJT BC639 1A/100V TO92
TR BU2508AF
TR BC858B SMD
TR BC858B SMD
TR BC858B SMD
TR BC858B SMD
TR BC858B SMD
TR BC848B SMD
TR BF422
TR BC858B SMD
TR BC858B SMD
TR BC858B SMD
TR BC858B SMD
TR BC858B SMD
TR BC327

D1
D100
D100
D100
D101
D101
D102
D103
D103
D104
D104
D105
D105
D106
D106
D107
D108
D110
D111
D112
D113
D114
D118
D119
D121
D125
D127
D129
D130
D131

30009699
30001329
30001279
30002733
20108354
30001371
30001371
30001318
30001371
30001318
30001371
30001318
30001371
30001344
30001371
30001371
30001315
30001288
30001323
30025773
30003720
30001285
30009366
30009366
20092405
30001285
30001315
30001285
30001329
30001318

DIODES
DIODE ZENER SMD BZT55C12
DIODE 1N4007 1A/1000V 30A
LED RED/GREEN LTL293SJ
LED INFRARED IR333
DIODE BRIDGE GBU4M 4A/1000V 150A(FORMLU)
DIODE ZENER 5.1V ZPD
DIODE ZENER 5.1V ZPD
DIODE BA159 1A/800V 20A
DIODE ZENER 5.1V ZPD
DIODE BA159 1A/800V 20A
DIODE ZENER 5.1V ZPD
DIODE BA159 1A/800V 20A
DIODE ZENER 5.1V ZPD
DIODE ZENER 6.2V 1/2W
DIODE ZENER 5.1V ZPD
DIODE ZENER 5.1V ZPD
DIODE BYD33D 1A/200V 20A
DIODE BYV27-200 2A/200V 50A
DIODE BY299 2A/800V 70A
DIODE ZENER SMD BZT55B5V1
DIODE ZENER BZT55C5V6 5.6V SMD
DIODE 1N4148 SMD
DIODE UF5402 3A/200V 150A
DIODE UF5402 3A/200V 150A
CN.ASY.37-DIODE UF5407+FERRITE BAR 5*8
DIODE 1N4148 SMD
DIODE BYD33D 1A/200V 20A
DIODE 1N4148 SMD
DIODE 1N4007 1A/1000V 30A
DIODE BA159 1A/800V 20A

SN CODE EX CODE
AA
AC
AA
AC
AA
AC
AA
AB
AA
AC
AA
AC
AA
AC
AA
AC
AA
AC
AA
AC
AA
AC
AA
AC
AA
AC
AA
AC
AA
AC
AA
AB
AA
AC
AA
AC
AA
AB
AD
AM
AA
AB
AE
AP
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AC
AA
AE
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AC
AA
AA
AC
AA
AB
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AB
AB
AA
AA
AA
AA
AA

AB
AB
AH
AC
AE
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AE
AD
AD
AA
AB
AB
AF
AF
AE
AB
AE
AB
AB
AB

28LF-92EES

REF No.
D132
D133
D134
D2
D200
D204
D205
D206
D207
D208
D209
D212
D213
D214
D215
D216
D217
D218
D219
D220
D221Y
D222Y
D506
D601
D602
D603
D604
D609
D610
D611
D612
D613
D614
D615
D617
D622
D623
D624
D625
D627
D628
D701
D702
D706
D902
D903
D904
D905
D907
D908
D909
D910
X100
X200
X201
X500
X700

PARTS
30001285
30003722
30001285
30009699
30001285
30001285
30025773
30018735
30018735
30018735
30018735
30001285
30012411
30025773
30025773
30025773
30025773
30025773
30025773
30025773
30025773
30025773
30012412
30001377
30001318
30001299
30001299
30001318
30001318
30007681
30001285
30001291
30025773
30001318
30025773
30001285
30001285
30001285
30001320
30001284
30001285
30007761
30001285
30001285
30001318
30001284
30001318
30001318
30001318
30014353
30001285
30001285

DESCRIPTION
DIODE 1N4148 SMD
DIODE ZENER ZPD15V
DIODE 1N4148 SMD
DIODE ZENER SMD BZT55C12
DIODE 1N4148 SMD
DIODE 1N4148 SMD
DIODE ZENER SMD BZT55B5V1
DIODE ZENER BZT55C15 15V SMD
DIODE ZENER BZT55C15 15V SMD
DIODE ZENER BZT55C15 15V SMD
DIODE ZENER BZT55C15 15V SMD
DIODE 1N4148 SMD
DIODE BA782 SMD
DIODE ZENER SMD BZT55B5V1
DIODE ZENER SMD BZT55B5V1
DIODE ZENER SMD BZT55B5V1
DIODE ZENER SMD BZT55B5V1
DIODE ZENER SMD BZT55B5V1
DIODE ZENER SMD BZT55B5V1
DIODE ZENER SMD BZT55B5V1
DIODE ZENER SMD BZT55B5V1
DIODE ZENER SMD BZT55B5V1
DIODE ZENER 2.4V SMD
DIODE ZENER 33V UZT 33B
DIODE BA159 1A/800V 20A
DIODE UF5404 3A/400V 150A
DIODE UF5404 3A/400V 150A
DIODE BA159 1A/800V 20A
DIODE BA159 1A/800V 20A
DIODE UF5407 3A/800V 150A
DIODE 1N4148 SMD
DIODE HER107 1A/800V 30A
DIODE ZENER SMD BZT55B5V1
DIODE BA159 1A/800V 20A
DIODE ZENER SMD BZT55B5V1
DIODE 1N4148 SMD
DIODE 1N4148 SMD
DIODE 1N4148 SMD
DIODE GUC BY228
DIODE 1N4148 0.15A/100V 0.5A
DIODE 1N4148 SMD
DIODE ZENER SMD BZT55C3V6
DIODE 1N4148 SMD
DIODE 1N4148 SMD
DIODE BA159 1A/800V 20A
DIODE 1N4148 0.15A/100V 0.5A
DIODE BA159 1A/800V 20A
DIODE BA159 1A/800V 20A
DIODE BA159 1A/800V 20A
DIODE BAT85
DIODE 1N4148 SMD
DIODE 1N4148 SMD

30002852
30002851
30008778
30006662
30001756

PACKAGED CIRCUITS
XTAL REZ 455KHZ
XTAL 4MHZ L.C=30PF
XTAL 20.25MHZ
XTAL 6MHZ
XTAL 18.432MHZ

AA
AC
AB
AC
AE

AD
AH
AF
AH
AP

COILS
FIXED COIL 1UH Q45 M-A
LINE FILTER SAFE 2X22MH 10mmX12.5mm
FIXED COIL 1UH Q45 M-A
FERRITE BEAT (805) BLM21A601S
FIXED COIL 10UH Q65 K-A
CAP CER 220PF 1KV K (PULSE)

AA
AC
AA
AA
AA
AA

AB
AH
AB
AD
AB
AD

L100
30001979
L101
30018866
L101
30001979
L102
30001971
L103
30001992
L107(NOT2) 30007308

SN CODE EX CODE
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AD
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AB
AF
AA
AB
AA
AD
AA
AD
AA
AB
AA
AB
AB
AF
AA
AB
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AB
AF
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AC
AA
AB
AA
AB

9

REF No.
L203
L206
L207
L212
L213
L214
L215
L216
L217
L218
L220
L227
L232
L236
L239
L247
L251
L252
L263
L264
L265
L266
L500
L501
L502
L503
L504
L505
L506
L601
L602
L603
L700
L701
L702
L703
L711
L714
L715
L717
L719

PARTS
30001996
30001979
30001979
30001971
30001971
30001971
30001971
30001971
30001971
30001971
30001971
30001971
30001971
30001971
30001971
30001971
30001971
30001971
30001979
30001979
30001979
30001987
30001992
30001992
30001992
30001992
30001992
30001992
30006770
30002031
30002156
30002829
30001996
30001996
30001996
30001996
30001996
30001971
30001971
30001979
30001968

DESCRIPTION
FIXED COIL 22UH Q40 K
FIXED COIL 1UH Q45 M-A
FIXED COIL 1UH Q45 M-A
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FIXED COIL 1UH Q45 M-A
FIXED COIL 1UH Q45 M-A
FIXED COIL 1UH Q45 M-A
FIXED COIL 4.7UH Q70 K-A
FIXED COIL 10UH Q65 K-A
FIXED COIL 10UH Q65 K-A
FIXED COIL 10UH Q65 K-A
FIXED COIL 10UH Q65 K-A
FIXED COIL 10UH Q65 K-A
FIXED COIL 10UH Q65 K-A
FIXED COIL 0.22UH
FIXED COIL INJECTION 15MH
LINEARITY COIL 30UH 110' (AK19)
FIXED COIL BRIDGE 1.5MH
FIXED COIL 22UH Q40 K
FIXED COIL 22UH Q40 K
FIXED COIL 22UH Q40 K
FIXED COIL 22UH Q40 K
FIXED COIL 22UH Q40 K
FERRITE BEAT (805) BLM21A601S
FERRITE BEAT (805) BLM21A601S
FIXED COIL 1UH Q45 M-A
FERRITE BEAD (0805) BLM21B201S

Z200
Z201

CERAMIC FILTERS
30014261 FILTER SAW K3958M
30012545 FILTER SAW K9656M

TR100
TR600
TR601
.

30019432
30021290
30002090
30015614

C1
C100
C100
C101
C101
C102
C102
C102
C103
C103
C103
C104
C105
C105

30000353
30000190
30000352
30000190
30012560
30000084
30000190
30012560
30000094
30000190
30016654
30016654
30012603
30000433

SN CODE EX CODE
AA
AB
AA
AB
AA
AB
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AD
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AD
AL
AD
AL
AD
AL
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AD
AA
AD
AA
AB
AA
AE
AF
AG

AR
AR

TRANSFORMERS
TRF SMPS SAFE AK45 110° (170-270V)
TRF FBT SAFE 110° 50HZ LAYER
LINE DRIVER NEW TYPE
TRF PFC SAFE 0,9A 42 MH EP

AG
AS
AD
AL

AS
BC
AM
AX

CAPACITORS
CAP EL 100UF 25V M
CAP CER 100PF 50V J CH
CAP EL 100UF 16V M
CAP CER 100PF 50V J CH
CAP SMD 100PF 50V J (0603)
CAP MKT SAFE 150NF 275V M AC P=15
CAP CER 100PF 50V J CH
CAP SMD 100PF 50V J (0603)
CAP MKT SAFE 220NF 275V M AC
CAP CER 100PF 50V J CH
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP CER 1NF 1KV M B

AA
AA
AA
AA
AA
AC
AA
AA
AA
AA
AA
AA
AA
AA

AB
AB
AB
AB
AB
AG
AB
AB
AB
AB
AB
AB
AB
AB

28LF-92EES

REF No.
C106
C106
C107
C107
C108
C109
C111
C113
C114
C115
C118
C119
C120
C121
C122
C124
C126
C127
C129
C130
C133
C134
C135
C137
C138
C140
C141
C142
C145
C146
C147
C148
C149
C150
C152
C154
C155
C156
C157
C160
C161
C162
C164
C165
C166
C168
C170
C171
C172
C173
C174
C175
C176
C2
C202
C208
C209
C210
C212
C213
C214
C215
C217
C218
C222
C225

PARTS
30000371
30000290
30000420
30000290
30000161
30000371
30007308
30006940
30007308
30000440
30007308
30000090
30007308
30012560
30007308
30000376
30012603
30012603
30012603
30000436
30018259
30018259
30018259
30000367
30016654
30000393
30000359
30000387
30000375
30012603
30016654
30000360
30012581
30016654
30000375
30000375
30000375
30016654
30016654
30000076
30000440
30007708
30000362
30000362
30000225
30000161
30012566
30012590
30000313
30012603
30012603
30012603
30012603
30012603
30012643
30016126
30016126
30016126
30000352
30012609
30016126
30016126
30016126
30012610
30016126
30000109

DESCRIPTION
CAP EL 22UF 50V M
CAP CER 10NF 50V Z F
CAP EL 150UF 400V M
CAP CER 10NF 50V Z F
CAP MKP SAFE 47NF 630V J
CAP EL 22UF 50V M
CAP CER 220PF 1KV K (PULSE)
CAP CER 2.7NF 1KV K B
CAP CER 220PF 1KV K (PULSE)
CAP CER SAFE 2.2NF 4KV M
CAP CER 220PF 1KV K (PULSE)
CAP MKT 22NF 100V J
CAP CER 220PF 1KV K (PULSE)
CAP SMD 100PF 50V J (0603)
CAP CER 220PF 1KV K (PULSE)
CAP EL 220UF 25V M
CAP SMD 100NF 25V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP CER 10NF 1KV ZE
CAP EL 4700UF 25V M
CAP EL 4700UF 25V M
CAP EL 4700UF 25V M
CAP EL 1UF 250V M
CAP SMD 100NF 16V K R (0603)
CAP EL 3.3UF 50V M
CAP EL 1000UF 16V M
CAP EL 33UF 50V M
CAP EL 220UF 16V M
CAP SMD 100NF 25V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP EL 1000UF 25V M
CAP SMD 1NF 50V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP EL 220UF 16V M
CAP EL 220UF 16V M
CAP EL 220UF 16V M
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP MKT SAFE 100NF 275V M AC
CAP CER SAFE 2.2NF 4KV M
CAP CER 1NF 1KV K (PULSE)
CAP EL 1UF 50V M
CAP EL 1UF 50V M
CAP CER 220PF 50V J SL
CAP MKP SAFE 47NF 630V J
CAP SMD 22PF 50V J (0603)
CAP SMD 47NF 50V K (0603)
CAP CER 22NF 50V Z F
CAP SMD 100NF 25V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP SMD 100NF 25V K R (0603)
RES SMD 1/16W 120R J (0603)
CAP SMD 220NF 16V K R (0603)
CAP SMD 220NF 16V K R (0603)
CAP SMD 220NF 16V K R (0603)
CAP EL 100UF 16V M
CAP SMD 68NF 50V K (0603)
CAP SMD 220NF 16V K R (0603)
CAP SMD 220NF 16V K R (0603)
CAP SMD 220NF 16V K R (0603)
CAP SMD 10NF 50V J (0603)
CAP SMD 220NF 16V K R (0603)
CAP MKT 470NF 63V J

SN CODE EX CODE
AA
AB
AA
AB
AF
AQ
AA
AB
AB
AE
AA
AB
AA
AD
AA
AB
AA
AD
AA
AC
AA
AD
AA
AB
AA
AD
AA
AB
AA
AD
AA
AB
AA
AB
AA
AB
AA
AB
AA
AC
AC
AG
AC
AG
AC
AG
AA
AB
AA
AB
AA
AB
AA
AC
AA
AB
AA
AB
AA
AB
AA
AB
AA
AE
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AB
AE
AA
AC
AA
AD
AA
AB
AA
AB
AA
AB
AB
AE
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AD

10

REF No.
C226
C227
C229
C231
C233
C234
C235
C237
C238
C240
C242
C246
C248
C249
C252
C253
C255
C258
C259
C260
C261
C262
C263
C264
C265
C266
C267
C268
C269
C270
C271
C273
C274
C275
C276
C277
C278
C279
C280
C282
C283
C284
C286
C287
C288
C289
C290
C292
C293
C296
C3
C300
C301
C302
C304
C308
C327
C331
C333
C348
C349
C350
C351
C352
C353
C355

PARTS
30000352
30016654
30000345
30016654
30016654
30016126
30012610
30012583
30012610
30012559
30012560
30012586
30012586
30012610
30000387
30000345
30016126
30012581
30000345
30012585
30012588
30012610
30012588
30012603
30000109
30000109
30012581
30012590
30016654
30016654
30016654
30012590
30016654
30016654
30016654
30000345
30012559
30012559
30000345
30012585
30000345
30012585
30000345
30012607
30012589
30012589
30012581
30012589
30012607
30012589
30000353
30012589
30012607
30012581
30012607
30012589
30000109
30012572
30012579
30000109
30012581
30016654
30000345
30016654
30012581
30012603

DESCRIPTION
CAP EL 100UF 16V M
CAP SMD 100NF 16V K R (0603)
CAP EL 10UF 50V M
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 220NF 16V K R (0603)
CAP SMD 10NF 50V J (0603)
CAP SMD 1.5NF 50V K (0603)
CAP SMD 10NF 50V J (0603)
CAP SMD 10PF 50V D COG (0603)
CAP SMD 100PF 50V J (0603)
CAP SMD 22NF 50V K (0603)
CAP SMD 22NF 50V K (0603)
CAP SMD 10NF 50V J (0603)
CAP EL 33UF 50V M
CAP EL 10UF 50V M
CAP SMD 220NF 16V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP EL 10UF 50V M
CAP SMD 2.2NF 50V K R (0603)
CAP SMD 33NF 50V K (0603)
CAP SMD 10NF 50V J (0603)
CAP SMD 33NF 50V K (0603)
CAP SMD 100NF 25V K R (0603)
CAP MKT 470NF 63V J
CAP MKT 470NF 63V J
CAP SMD 1NF 50V K R (0603)
CAP SMD 47NF 50V K (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 47NF 50V K (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP EL 10UF 50V M
CAP SMD 10PF 50V D COG (0603)
CAP SMD 10PF 50V D COG (0603)
CAP EL 10UF 50V M
CAP SMD 2.2NF 50V K R (0603)
CAP EL 10UF 50V M
CAP SMD 2.2NF 50V K R (0603)
CAP EL 10UF 50V M
CAP SMD 150PF 50V J (0603)
CAP SMD 4.7NF 50V K (0603)
CAP SMD 4.7NF 50V K (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 4.7NF 50V K (0603)
CAP SMD 150PF 50V J (0603)
CAP SMD 4.7NF 50V K (0603)
CAP EL 100UF 25V M
CAP SMD 4.7NF 50V K (0603)
CAP SMD 150PF 50V J (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 150PF 50V J (0603)
CAP SMD 4.7NF 50V K (0603)
CAP MKT 470NF 63V J
CAP SMD 390PF 50V J (0603)
CAP SMD 82PF 50V J (0603)
CAP MKT 470NF 63V J
CAP SMD 1NF 50V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP EL 10UF 50V M
CAP SMD 100NF 16V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 100NF 25V K R (0603)

SN CODE EX CODE
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AD
AA
AD
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AD
AA
AA
AA
AB
AA
AD
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB

28LF-92EES

REF No.
C356
C357
C358
C359
C360
C361
C362
C4
C5
C506
C507
C508
C509
C510
C511
C514
C515
C516
C517
C518
C519
C520
C521
C522
C523
C524
C525
C527
C530
C531
C537
C601
C603
C604
C605
C607
C608
C609
C612
C613
C614
C616
C617
C618
C619
C621
C622
C623
C624
C628
C630
C631
C632
C633
C635
C636
C637
C638
C643
C644
C645
C646
C648
C700
C701
C702

PARTS
30000109
30000345
30000345
30012581
30012581
30012603
30012603
30012603
30000078
30000345
30000393
30000345
30016654
30016654
30016654
30016654
30016654
30016654
30016654
30016654
30016654
30012573
30012573
30000345
30000345
30000345
30000345
30016654
30000375
30000393
30016654
30000351
30000402
30000075
30000406
30012610
30000409
30000082
30000348
30000360
30000360
30023448
30000161
30000444
30000367
30000136
30000137
30000162
30013003
30016126
30012603
30000296
30000074
30012603
30012584
30009208
30000332
30000092
30000092
30012591
30012591
30000296
30000069
30000352
30000345
30012583

DESCRIPTION
CAP MKT 470NF 63V J
CAP EL 10UF 50V M
CAP EL 10UF 50V M
CAP SMD 1NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP MKT 1UF 100V M
CAP EL 10UF 50V M
CAP EL 3.3UF 50V M
CAP EL 10UF 50V M
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 47PF 50V J (0603)
CAP SMD 47PF 50V J (0603)
CAP EL 10UF 50V M
CAP EL 10UF 50V M
CAP EL 10UF 50V M
CAP EL 10UF 50V M
CAP SMD 100NF 16V K R (0603)
CAP EL 220UF 16V M
CAP EL 3.3UF 50V M
CAP SMD 100NF 16V K R (0603)
CAP EL 10UF 350V M
CAP EL 47UF 100V M
CAP MKT 100NF 250V K (DC)
CAP EL 47UF 250V M (HR) 105°
CAP SMD 10NF 50V J (0603)
CAP EL 470UF 25V M
CAP MKT 15NF 63V J
CAP EL 10UF 160V M
CAP EL 1000UF 25V M
CAP EL 1000UF 25V M
CAP MKP 4.3NF 2KV J
CAP MKP SAFE 47NF 630V J
CAP CER 470PF 1KV KB
CAP EL 1UF 250V M
CAP MKP SAFE 12NF 2000V %3.5
CAP MKP 15NF 630V J
CAP MKP SAFE 470NF 250V J
CAP MKP SAFE 1UF 250V J P=15
CAP SMD 220NF 16V K R (0603)
CAP SMD 100NF 25V K R (0603)
CAP CER 100NF 100V Z F
CAP MKT 100NF 63V J
CAP SMD 100NF 25V K R (0603)
CAP SMD 1.8NF 50V K R (0603)
CAP CER 470PF 1KV K (PULSE)
CAP SMD 4.7NF 50V K (0805)
CAP MKT 220NF 63V J
CAP MKT 220NF 63V J
CAP SMD 5.6NF 50V K (0603)
CAP SMD 5.6NF 50V K (0603)
CAP CER 100NF 100V Z F
CAP MKT 1NF 100V J
CAP EL 100UF 16V M
CAP EL 10UF 50V M
CAP SMD 1.5NF 50V K (0603)

SN CODE EX CODE
AA
AD
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AB
AF
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AE
AA
AB
AA
AD
AD
AL
AA
AB
AA
AD
AA
AB
AA
AB
AA
AE
AA
AE
AA
AD
AB
AE
AA
AB
AA
AB
AC
AG
AC
AG
AD
AL
AC
AG
AA
AB
AA
AB
AA
AB
AA
AC
AA
AB
AA
AA
AA
AC
AA
AB
AA
AD
AA
AD
AA
AA
AA
AA
AA
AB
AA
AC
AA
AB
AA
AB
AA
AA

11

REF No.
C706
C707
C708
C712
C713
C715
C716
C717
C718
C719
C720
C721
C722
C724
C725
C728
C729
C730
C731
C732
C733
C734
C735
C736
C737
C738
C739
C740
C741
C742
C743
C744
C745
C746
C747
C748
C749
C750
C751
C754
C763
C764
C765
C767
C769
C771
C772
C774
C775
C776
C779
C781
C782
C783
C784
C785
C786
C789
C791
C793
C794
C795
C796
C803
C808
C809

PARTS
30012581
30016654
30000407
30012581
30012581
30012581
30016654
30000092
30000092
30016126
30000345
30012576
30012576
30000345
30016654
30012581
30016126
30016126
30012583
30012581
30016126
30016654
30000393
30000345
30000345
30012576
30000345
30012581
30012581
30012565
30012565
30000345
30012581
30012581
30012581
30012583
30012581
30012581
30012581
30000352
30016126
30012567
30016654
30016126
30000345
30000345
30000345
30012567
30012585
30000352
30012581
30012590
30000352
30012590
30000362
30012585
30012581
30000362
30000362
30012581
30012581
30012585
30012585
30012573
30000345
30000409

DESCRIPTION
CAP SMD 1NF 50V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP EL 470UF 16V M
CAP SMD 1NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP MKT 220NF 63V J
CAP MKT 220NF 63V J
CAP SMD 220NF 16V K R (0603)
CAP EL 10UF 50V M
CAP SMD 56PF 50V J CH (0603)
CAP SMD 56PF 50V J CH (0603)
CAP EL 10UF 50V M
CAP SMD 100NF 16V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 220NF 16V K R (0603)
CAP SMD 220NF 16V K R (0603)
CAP SMD 1.5NF 50V K (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 220NF 16V K R (0603)
CAP SMD 100NF 16V K R (0603)
CAP EL 3.3UF 50V M
CAP EL 10UF 50V M
CAP EL 10UF 50V M
CAP SMD 56PF 50V J CH (0603)
CAP EL 10UF 50V M
CAP SMD 1NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 1.8PF 50V J CH (0603)
CAP SMD 1.8PF 50V J CH (0603)
CAP EL 10UF 50V M
CAP SMD 1NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 1.5NF 50V K (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP EL 100UF 16V M
CAP SMD 220NF 16V K R (0603)
CAP SMD 220PF 50V J (0603)
CAP SMD 100NF 16V K R (0603)
CAP SMD 220NF 16V K R (0603)
CAP EL 10UF 50V M
CAP EL 10UF 50V M
CAP EL 10UF 50V M
CAP SMD 220PF 50V J (0603)
CAP SMD 2.2NF 50V K R (0603)
CAP EL 100UF 16V M
CAP SMD 1NF 50V K R (0603)
CAP SMD 47NF 50V K (0603)
CAP EL 100UF 16V M
CAP SMD 47NF 50V K (0603)
CAP EL 1UF 50V M
CAP SMD 2.2NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP EL 1UF 50V M
CAP EL 1UF 50V M
CAP SMD 1NF 50V K R (0603)
CAP SMD 1NF 50V K R (0603)
CAP SMD 2.2NF 50V K R (0603)
CAP SMD 2.2NF 50V K R (0603)
CAP SMD 47PF 50V J (0603)
CAP EL 10UF 50V M
CAP EL 470UF 25V M

SN CODE EX CODE
AA
AB
AA
AB
AA
AC
AA
AB
AA
AB
AA
AB
AA
AB
AA
AD
AA
AD
AA
AB
AA
AB
AA
AA
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AA
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AD

28LF-92EES

REF No.
C810
C811
C900
C902
C904
C905
C906
C908
C909
C910
C913
C914
C915
C916
C918
C919
C920
C921
C931
C932
C934
C TUNER

PARTS
30012574
30012574
30000075
30000415
30000287
30000350
30000075
30000438
30000359
30000294
30000294
30012577
30000407
30000352
30012577
30012577
30012577
30000294
30000075
30000367
30012603
30000285

DESCRIPTION
CAP SMD 470PF 50V J (0603)
CAP SMD 470PF 50V J (0603)
CAP MKT 100NF 250V K (DC)
CAP EL 4.7UF 250V M
CAP CER 10NF 50V K B
CAP EL 10UF 250V M
CAP MKT 100NF 250V K (DC)
CAP CER 2.2NF 2KV
CAP EL 1000UF 16V M
CAP SMD 100NF 50V K (0805)
CAP SMD 100NF 50V K (0805)
CAP SMD 560PF 50V J (0603)
CAP EL 470UF 16V M
CAP EL 100UF 16V M
CAP SMD 560PF 50V J (0603)
CAP SMD 560PF 50V J (0603)
CAP SMD 560PF 50V J (0603)
CAP SMD 100NF 50V K (0805)
CAP MKT 100NF 250V K (DC)
CAP EL 1UF 250V M
CAP SMD 100NF 25V K R (0603)
CAP CER 1NF 100V KB

R1
R100
R100
R100
R101
R101
R101
R102
R103
R103
R104
R105
R105
R106
R106
R107
R108
R108
R109
R110
R110
R111
R112
R112
R113
R116
R117
R118
R119
R122
R126
R127
R129
R130
R131
R132
R133
R134
R137
R138
R139
R140
R141

30012673
30000718
30000689
30012510
30000896
30000526
30000489
30000594
30000770
30012509
30000594
30000982
30000712
30000593
30000712
30000712
30000452
30000650
30000650
30012657
30000471
30000808
30012657
30000471
30000808
30001173
30001257
30000580
30012641
30014022
30012641
30012692
30012692
30012641
30000886
30000886
30000880
30000575
30000481
30000660
30000593
30001174
30012641

RESISTORS
RES SMD 1/16W 270R J (0603)
RES CF 1/4W 4.7K J
RES CF 1/4W 3.9K J
RES SMD 1/16W 100R J (0603)
RES MF 1/4W 160K G
RES CF 1/4W 1.5K J
RES SMD 1/10W 1R J (0805)
RES CF 1/4W 22K J
RES CF 1/4W 680R J
RES SMD 1/16W 100K J (0603)
RES CF 1/4W 22K J
RES MF 1/4W 4.7K J
RES CF 1/4W 470R J
RES SMD 1/10W 2.2K J (0805)
RES CF 1/4W 470R J
RES CF 1/4W 470R J
RES CF 1/4W 10R J
RES CF 1/4W 33R J
RES CF 1/4W 33R J
RES SMD 1/16W 1K J (0603)
RES CF 1/4W 10K J
RES CF 1/4W 82R J
RES SMD 1/16W 1K J (0603)
RES CF 1/4W 10K J
RES CF 1/4W 82R J
RES MO 1W 0.47R J
RES MG SAFE 1/2W 4.7M J
RES CF 1/4W 22R J
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 47R J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 10K J (0603)
RES MF 1/4W 1.5K F
RES MF 1/4W 1.5K F
RES MF 1/4W 130K F
RES SMD 1/10W 2K J
RES CF 1/4W 1M J
RES CF 1/4W 3.3K J
RES SMD 1/10W 2.2K J (0805)
RES MO 2W 0.47R J
RES SMD 1/16W 10K J (0603)

SN CODE EX CODE
AA
AA
AA
AA
AA
AD
AA
AC
AA
AA
AA
AD
AA
AD
AA
AD
AA
AC
AA
AB
AA
AB
AA
AA
AA
AC
AA
AB
AA
AA
AA
AA
AA
AA
AA
AB
AA
AD
AA
AB
AA
AB
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA

AB
AB
AB
AB
AA
AB
AB
AB
AB
AB
AB
AA
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AD
AB
AB
AA
AB
AB
AB
AB
AB
AB
AA
AB
AB
AB
AB
AB
AB

12

REF No.
R142
R143
R144
R145
R146
R147
R148
R149
R150
R151
R152
R153
R154
R155
R156
R157
R158
R161
R162
R164
R165
R166
R167
R168
R2
R200
R201
R202
R203
R204
R205
R206
R207
R208
R209
R210
R211
R215
R217
R219
R220
R221
R222
R230
R231
R232
R233
R234
R235
R236
R237
R238
R239
R241
R242
R247
R248
R254
R256
R259
R260
R261
R265
R266
R267
R268

PARTS
30012657
30020455
30000480
30020457
30012697
30020455
30020457
30012657
30000466
30012641
30001224
30012692
30012641
30012641
30012641
30012641
30012657
30012657
30000494
30000593
30001159
30012641
30018085
30018085
30012641
30012713
30012713
30012713
30012713
30012713
30012713
30000459
30000459
30012510
30012510
30012662
30012692
30012713
30012641
30000792
30012641
30000792
30012641
30012641
30000792
30012713
30012657
30012702
30000655
30012713
30012641
30012641
30012713
30012510
30012696
30000500
30012641
30012657
30012655
30000593
30012669
30012677
30000459
30000459
30012657
30012641

DESCRIPTION
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 1.5K F (0603)
RES SMD 1/10W 100K J (0805)
RES SMD 1/16W 910R F (0603)
RES SMD 1/16W 5.1K J (0603)
RES SMD 1/16W 1.5K F (0603)
RES SMD 1/16W 910R F (0603)
RES SMD 1/16W 1K J (0603)
RES CF 1/4W 1K J
RES SMD 1/16W 10K J (0603)
RES FUSE SAFE 1/2W 0.22R J
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/10W 120R J (0805)
RES SMD 1/10W 2.2K J (0805)
RES MO 1W 0.33R J
RES SMD 1/16W 10K J (0603)
CAP VAR SAFE 510V K MFCN14D511
CAP VAR SAFE 510V K MFCN14D511
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 75R J (0603)
RES CF 1/4W 100R J
RES CF 1/4W 100R J
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 2.7K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 10K J (0603)
RES CF 1/4W 75R J
RES SMD 1/16W 10K J (0603)
RES CF 1/4W 75R J
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES CF 1/4W 75R J
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 560R J (0603)
RES CF 1/4W 330R J
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 47K J (0603)
RES CF 1/4W 12K J
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 180R J (0603)
RES SMD 1/10W 2.2K J (0805)
RES SMD 1/16W 22K J (0603)
RES SMD 1/16W 3.3K J (0603)
RES CF 1/4W 100R J
RES CF 1/4W 100R J
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 10K J (0603)

SN CODE EX CODE
AA
AB
AA
AA
AA
AB
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AD
AA
AD
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB

28LF-92EES

REF No.
R269
R270
R272
R274
R276
R277
R278
R279
R280
R281
R282
R283
R284
R285
R286
R288
R289
R299
R308
R310
R316
R317
R318
R326
R327
R330
R334
R336
R337
R338
R342
R343
R349
R350
R351
R352
R353
R354
R355
R356
R357
R358
R359
R4
R400
R404
R406
R409
R411
R412
R413
R414
R415
R416
R417
R418
R419
R420
R421
R422
R423
R424
R425
R426
R427
R428

PARTS
30012641
30012641
30012713
30012702
30000593
30012679
30012713
30012713
30012713
30012673
30012668
30012707
30012684
30012707
30012707
30000770
30012707
30012510
30012641
30012713
30012641
30000792
30012657
30000815
30000480
30012657
30012713
30000466
30000466
30000466
30012657
30012692
30012641
30012510
30012510
30012698
30012685
30012677
30012643
30012707
30012644
30012655
30012669
30012677
30012669
30012692
30012650
30012713
30012657
30012657
30012713
30012713
30012679
30012695
30012695
30012695
30012695
30012695
30012695
30012695
30012695
30012695
30012695
30012695
30012661
30012510

DESCRIPTION
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 560R J (0603)
RES SMD 1/10W 2.2K J (0805)
RES SMD 1/16W 3.9K J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 270R J (0603)
RES SMD 1/16W 220R J (0603)
RES SMD 1/16W 680R J (0603)
RES SMD 1/16W 330R J (0603)
RES SMD 1/16W 680R J (0603)
RES SMD 1/16W 680R J (0603)
RES CF 1/4W 680R J
RES SMD 1/16W 680R J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 10K J (0603)
RES CF 1/4W 75R J
RES SMD 1/16W 1K J (0603)
RES CF 1/4W 8.2K J
RES SMD 1/10W 100K J (0805)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 75R J (0603)
RES CF 1/4W 1K J
RES CF 1/4W 1K J
RES CF 1/4W 1K J
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 5.6K J (0603)
RES SMD 1/16W 33K J (0603)
RES SMD 1/16W 3.3K J (0603)
RES SMD 1/16W 120R J (0603)
RES SMD 1/16W 680R J (0603)
RES SMD 1/16W 12K J (0603)
RES SMD 1/16W 180R J (0603)
RES SMD 1/16W 22K J (0603)
RES SMD 1/16W 3.3K J (0603)
RES SMD 1/16W 22K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 15K J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 75R J (0603)
RES SMD 1/16W 3.9K J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 2.4K J (0603)
RES SMD 1/16W 100R J (0603)

SN CODE EX CODE
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AA
AA
AA
AA
AB
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB

13

REF No.
R429
R430
R5
R503
R504
R505
R506
R507
R508
R509
R510
R512
R513
R516
R518
R519
R520
R521
R522
R523
R524
R526
R527
R528
R533
R535
R537
R538
R539
R540
R541
R548
R549
R550
R553
R554
R555
R556
R561
R564
R565
R566
R567
R568
R571
R582
R583
R585
R586
R587
R588
R589
R590
R591
R6
R600
R601
R603
R604
R605
R607
R608
R611
R612
R613
R614

PARTS
30012510
30012510
30012642
30012510
30012510
30000471
30000471
30012696
30012696
30012696
30012696
30012668
30012662
30012692
30012662
30000466
30012650
30012679
30012692
30012712
30012679
30012679
30012679
30012650
30012685
30012641
30000466
30012508
30012508
30012508
30012662
30012641
30012657
30012679
30012695
30012692
30012506
30012703
30012982
30012692
30012510
30012641
30000459
30000459
30012657
30012641
30012641
30012641
30012641
30012641
30012697
30012641
30012679
30012711
30012673
30012510
30000470
20147207
30001244
30000927
30012695
30001100
30001229
30000471
30001234
30001229

DESCRIPTION
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 120K J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 100R J (0603)
RES CF 1/4W 10K J
RES CF 1/4W 10K J
RES SMD 1/16W 47K J (0603)
RES SMD 1/16W 47K J (0603)
RES SMD 1/16W 47K J (0603)
RES SMD 1/16W 47K J (0603)
RES SMD 1/16W 220R J (0603)
RES SMD 1/16W 2.7K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 2.7K J (0603)
RES CF 1/4W 1K J
RES SMD 1/16W 15K J (0603)
RES SMD 1/16W 3.9K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 8.2K J (0603)
RES SMD 1/16W 3.9K J (0603)
RES SMD 1/16W 3.9K J (0603)
RES SMD 1/16W 3.9K J (0603)
RES SMD 1/16W 15K J (0603)
RES SMD 1/16W 33K J (0603)
RES SMD 1/16W 10K J (0603)
RES CF 1/4W 1K J
RES SMD 1/16W 1.8K J (0603)
RES SMD 1/16W 1.8K J (0603)
RES SMD 1/16W 1.8K J (0603)
RES SMD 1/16W 2.7K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 3.9K J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 1.5K J (0603)
RES SMD 1/16W 56K J (0603)
RES SMD 1/16W 10R J 0603
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 10K J (0603)
RES CF 1/4W 100R J
RES CF 1/4W 100R J
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 5.1K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 3.9K J (0603)
RES SMD 1/16W 75K J (0603)
RES SMD 1/16W 270R J (0603)
RES SMD 1/16W 100R J (0603)
RES CF 1/2W 10K J
CN.ASY.45-R.F.1/2W0.47R+F.B.3.5X4.7X0.8
RES FUSE SAFE 1/2W 0.47R J
RES MF 1/4W 220K J
RES SMD 1/16W 470R J (0603)
RES MO 1W 150R J
30001229
RES CF 1/4W 10K J
RES FUSE 2W 33R J
30001229

SN CODE EX CODE
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AC
AA
AB
AA
AC
AA
AC

28LF-92EES

REF No.
R616
R618
R621
R622
R623
R624
R625
R626
R627
R628
R629
R630
R631
R632
R636
R637
R638
R639
R640
R641
R644
R645
R646
R647
R648
R649
R650
R652
R653
R654
R655
R656
R657
R658
R7
R700
R701
R702
R703
R704
R705
R710
R713
R714
R715
R718
R719
R723
R724
R725
R726
R742
R746
R747
R749
R753
R754
R755
R756
R759
R760
R762
R763
R765
R766
R793

PARTS
30018904
30001229
30012696
30012696
30012641
30012692
30000480
30012692
30000480
30012657
30012674
30000872
30000872
30014465
30012641
30012657
30012674
30001162
30001134
30000965
30000649
30000580
30012654
30012650
30012658
30001228
30001082
30000848
30012509
30012708
30012674
30012641
30000466
30000466
30012657
30012695
30012695
30012657
30012510
30012510
30012510
30012657
30012510
30012510
30012657
30012657
30012657
30000459
30012510
30012657
30012657
30012692
30012692
30012641
30012709
30014076
30012709
30014076
30012641
30012641
30012702
30012641
30012702
30012669
30012669
30012695

DESCRIPTION
RES MO 5W 4.7k J
RES FUSE SAFE 1W 2.2R J
RES SMD 1/16W 47K J (0603)
RES SMD 1/16W 47K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/10W 100K J (0805)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/10W 100K J (0805)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 27K J (0603)
RES MF 1/4W 120K F
RES MF 1/4W 120K F
RES SMD 1/16W 2.7K F (603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 27K J (0603)
RES MO 1W 390R J
RES MO 2W 2.2R J
RES MF 1/2W 0.33R J
RES CF 1/2W 33R J
RES CF 1/4W 22R J
RES SMD 1/16W 180K J (0603)
RES SMD 1/16W 15K J (0603)
RES SMD 1/16W 1M J (0603)
RES FUSE SAFE 1/2W 2.2R J
RES MO 1/2W 1K J
RES MF 1/4W 1K F
RES SMD 1/16W 100K J (0603)
RES SMD 1/16W 68K J (0603)
RES SMD 1/16W 27K J (0603)
RES SMD 1/16W 10K J (0603)
RES CF 1/4W 1K J
RES CF 1/4W 1K J
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 1K J (0603)
RES CF 1/4W 100R J
RES SMD 1/16W 100R J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 1K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 4.7K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 7.5K J (0603)
RES SMD 1/16W 4.7R J (0603)
RES SMD 1/16W 7.5K J (0603)
RES SMD 1/16W 4.7R J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 560R J (0603)
RES SMD 1/16W 10K J (0603)
RES SMD 1/16W 560R J (0603)
RES SMD 1/16W 22K J (0603)
RES SMD 1/16W 22K J (0603)
RES SMD 1/16W 470R J (0603)

SN CODE EX CODE
AA
AD
AA
AC
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AA
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB

14

REF No.
R794
R815
R817
R818
R819
R820
R900
R901
R902
R903
R904
R905
R906
R907
R908
R909
R910
R911
R912
R913
R914
R915
R916
R917
R919
R920
R921
R922
R923
R925
R926
R927
R928
R930
R931
R932
R933

PARTS
30012695
30012644
30012641
30000723
30012679
30012696
30000788
30000459
30000459
30000459
30000535
30000477
30000477
30023197
30023197
30000477
30023197
30000466
30000458
30021483
30000459
30012649
30014128
30000583
30012644
30012698
30012649
30014128
30000583
30012649
30014128
30000583
30012510
30000477
30012667
30012707
30012707

DESCRIPTION
RES SMD 1/16W 470R J (0603)
RES SMD 1/16W 12K J (0603)
RES SMD 1/16W 10K J (0603)
RES CF 1/4W 47K J
RES SMD 1/16W 3.9K J (0603)
RES SMD 1/16W 47K J (0603)
RES CF 1/4W 6.8M J
RES CF 1/4W 100R J
RES CF 1/4W 100R J
RES CF 1/4W 100R J
RES CF 1/2W 150K J
RES CF 1/4W 100K J
RES CF 1/4W 100K J
RES CC 1W 1.5K K
RES CC 1W 1.5K K
RES CF 1/4W 100K J
RES CC 1W 1.5K K
RES CF 1/4W 1K J
RES CF 1/2W 100R J
RES CC 1W 2.2K K
RES CF 1/4W 100R J
RES SMD 1/16W 150R J (0603)
RES SMD 1/16W 33R J (0603)
RES CF 1/4W 220R J
RES SMD 1/16W 12K J (0603)
RES SMD 1/16W 5.6K J (0603)
RES SMD 1/16W 150R J (0603)
RES SMD 1/16W 33R J (0603)
RES CF 1/4W 220R J
RES SMD 1/16W 150R J (0603)
RES SMD 1/16W 33R J (0603)
RES CF 1/4W 220R J
RES SMD 1/16W 100R J (0603)
RES CF 1/4W 100K J
RES SMD 1/16W 220K J (0603)
RES SMD 1/16W 680R J (0603)
RES SMD 1/16W 680R J (0603)

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

20090585
20140457
20141081
20140469
20140470
20141084
20108124
35000212
35000212
35000217
35004572
35005084
35005418
35009300
20142751
30018087
35000217
20140466
60000009
35005061
30007728
30009833
30009833
30019101
40006432
30009005
30012631

MISCELLANEOUS PARTS
CHASSIS FRAME 288X (AK37)
BACK COVER 2862W EKO2GRAY(I)
SNOW BOX ASSY 2862W RF
SNOW BOX TOP 2862W
SNOW BOX BOTTOM 2862W
SCR.ASSY.2862W W/SB AK45/52
BACK DOOR AK45/52 (I)
SCREW S C ZNSY YSMB 2.9*13
SCREW S C ZNSY YSMB 2.9*13
SCREW S C SYF YFMB 3.5*9.5
SCREW P C AgSYF YSB 4x20
SCREW C ZN RYAKB 6x30
SCREW P C ZN YSB 3.5x10 (KN1031 T35X10)
SCREW P C ZN FYSB 4X16 (D:11)
CHS.ASSY.45-317C21114121123G1129D
CNAS 2P/350 TRFPFC DIS W/C
SCREW S C SYF YFMB 3.5*9.5
BRACKET CHS XX62-64W (I) V.0
FR-HIPS NATR.V-0
SCREW RB C SK ZN YFMB 2.9*9.5
CABLE 1P R2.6 50 W/CLIPS
CABL 1P/100 SIS
CABL 1P/100 SIS
CABL 1P/350 DIS UL1672AWG22
MOUNTING BUTTON (MB-10)
IC 24C16
CNAS 2P/760 DIS W/BL C+FER UL2547 AWG24

SN CODE EX CODE
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AD
AA
AD
AA
AB
AA
AD
AA
AB
AA
AB
AA
AD
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB
AA
AB

AE
AS
AM
AD
AD
AE
AC
AA
AA
AA
AA
AA
AA
AA
BP
AA
AA
AD
AK
AA
AA
AA
AA
AA
AA
AF
AB

AP
BD
AY
AN
AN
AP
AH
AB
AB
AB
AB
AB
AB
AB
CF
AE
AB
AM
AV
AA
AC
AB
AB
AB
AB
AQ
AG

28LF-92EES

REF No.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
B-B
D100
F100
J344
JK100
JK101
NOT
PL1
PL100
PL100
PL101
PL101
PL101
PL102
PL102
PL102
PL103
PL103
PL104
PL107
PL107
PL108
PL2
PL204
PL206
PL207
PL214
PL500
PL502
PL509
PL602
PL602
PL603
PL603
PL604
PL703

PARTS
30027382
40016872
20151304
30028208
20151924
35000136
20152358
20152375
20152376
20004519
20140467
60000009
35008849
35008850
40016871
40016873
20152713
20147245
20143026
20142229
50043630
50048412
20152717
20153349
35008861
35000010
20160076
30015231
40016814
50043896
30009834
20060150
20000848
30001996
30026584
30001902
30011742
30001912
30001792
30020822
30001795
30001838
30020137
30001792
30001830
30020137
30001839
30020137
30008726
30001792
30014711
30001792
30001829
30010921
30010039
30001830
35000135
30001783
30001784
20108005
30001792
30016483
30001829
30019083
30001850
30001839

DESCRIPTION
SPEAKER 7R 12W F/R 60x120MM-28&32" SHARP
SPEAKER BRACKET 286XW
POWER CORD ASSY.(2.4MT W/FTZ)(LONGWELL)
POWER CORD SAFE EURO 2.2M SHARP W/FILTER
MD.ASY.SB112-FAV+HP+SVHS 2862/3262 (AK45
FUSE HOLDER TK79-A (GRAY)
FRONT 2862W W/H SLV285S(P)(PW/S)
CONTROL PANEL DOOR 2862W (SLV285S/P)
SPEAKER GRILL 2862W SLV285S(P)
CABLE HOLDER CRT (I)
BRACKET BF 2862W (I) V.0
FR-HIPS NATR.V-0
DOOR METAL SPRING (30mmX20mmX0.5mm)
METAL WASHER XX6XW (SHARP)
DOOR SPACER (M10)
WASHER 2862W
LBL.BCK.CVR.SHARP 28LF92E(ES)AK45
LBL.BCK.CVR.ASSY (TV) (WO/UL)SHARP
R/C 1548 SHARP (EKO2GRAY/I) (GRAY/S)
UKV.B.ASSY.UK12 (SMD)
WARRANTY CARD SHARP (ESP)
I/B SHARP 28LF92E(ES) P/AK45/1548/ES/POR
LBL.CART.BOX SHARP 28LF92E(ES) AK45
BUTTON ASSY 2862W/3262WRF (SLV285S(P)
SPRING ON/OFF SWITCH 1462 SHARP(SHARP)
EARTH SPRING (4CM)
CRT B.ASSY.TP45B-5-SI.FOC.(AK45)SHARP(RF
ROTATION COIL AK33 29"
LOGO SHARP (D.C.-SILVER)28-32"
CONTROL STICKER 2862W
CABL 1P/60 SIS
BRACKET LED 20
FUSE ASSY.TK79-A (2.5A)
FIXED COIL 22UH Q40 K
TV JACK BOARD JXTI046
JACK HEADPHONE STEREO WO/SW
CABL 1P/25 SIS
PIN F 5P/2.5MM (11.5MM)
CONN HEADER 2P 7.5MM TOP WHT
CNAS 6P/450 FLT W/C+FER UL2468AWG24
CONN HEADER 3P 5/7.5MM TOP WHT
CONN HEADER 3P 2.5MM TOP YELLOW SD
CNAS 600 FAV SVHS W/DC+FER
CONN HEADER 2P 7.5MM TOP WHT
CONN HEADER 2P 2.5MM TOP BLUE SD
CNAS 600 FAV SVHS W/DC+FER
CONN HEADER 3P 2.5MM TOP GREEN SD
CNAS 600 FAV SVHS W/DC+FER
CNAS 3P/550 FLT W/BLK C UL2468AWG24
CONN HEADER 2P 7.5MM TOP WHT
CNAS 2P/250 W/DC
CONN HEADER 2P 7.5MM TOP WHT
CONN HEADER 2P 2.5MM TOP WHT SD
DOUBLE-DECK SCART SOCKET
CONN HEADER 8P 2.5MM TOP WHT
CONN HEADER 2P 2.5MM TOP BLUE SD
TEST PIN 1.1MM
CONN HEADER 5P 2.5MM TOP BD
CONN HEADER 6P 2.5MM TOP BD
MD.ASY.RT45-ROTATION (TILT) AK45
CONN HEADER 2P 7.5MM TOP WHT
CNAS 2P/600 HRZ DIS W/C UL1672AWG24
CONN HEADER 2P 2.5MM TOP WHT SD
CNAS 2P/600 SIS W/C+FER UL1007AWG24
CONN HEADER 6P 2.5MM TOP WHT SD
CONN HEADER 3P 2.5MM TOP GREEN SD

SN CODE EX CODE
AE
AP
AA
AE
AD
AM
AG
AT
AS
BD
AA
AD
AT
BE
AD
AL
AF
AQ
AA
AB
AA
AD
AK
AV
AA
AC
AA
AB
AA
AB
AA
AB
AA
AC
AA
AC
AM
AY
AE
AQ
AB
AF
AC
AK
AA
AC
AC
AK
AA
AA
AA
AB
AR
BB
AE
AQ
AD
AK
AD
AM
AA
AB
AA
AD
AA
AD
AA
AB
AG
AS
AC
AH
AA
AB
AA
AD
AA
AC
AC
AG
AA
AC
AA
AC
AF
AQ
AA
AC
AA
AB
AA
AB
AA
AC
AA
AB
AB
AF
AA
AC
AB
AF
AA
AC
AA
AB
AD
AM
AA
AB
AA
AB
AA
AB
AA
AC
AA
AC
AD
AM
AA
AC
AA
AE
AA
AB
AB
AF
AA
AC
AA
AC

15

REF No.
PL708
PL709
PL711
PL901
PL902
PL902
PL903
PL903
PL905
PL909
S224
S225
S226
S227
SG901
SG902
SG903
SG904
SG905
SW100
SW101
SW102
SW103
SW104
TH101

PARTS
30001762
30001764
30001836
30028447
30010039
30027546
30001850
30030432
35000135
35000135
30000452
30012982
30012982
30012982
30000428
30000428
30000428
30000428
30021532
30002181
30002181
30002181
30002181
30017848
30001268

DESCRIPTION
CONN HEADER 2P 2.5MM(9.7MM) TOP
CONN HEADER 2P 2.5MM(9.7MM) TOP BLACK
CONN HEADER 3P 2.5MM TOP BLACK SD
SOCKET CRT SAFE NARROWNECK W/GND INCHANG
CONN HEADER 8P 2.5MM TOP WHT
CNAS 5P/350 SHL+3P/350 SIS RGB W/DC+FER
CONN HEADER 6P 2.5MM TOP WHT SD
CNAS 6P-4P/500+1P/850 SIS W/3C+FR UL1007
TEST PIN 1.1MM
TEST PIN 1.1MM
RES CF 1/4W 10R J
RES SMD 1/16W 10R J 0603
RES SMD 1/16W 10R J 0603
RES SMD 1/16W 10R J 0603
SPARK GAP 300V
SPARK GAP 300V
SPARK GAP 300V
SPARK GAP 300V
SPARK GAP 1500V
SWITCH TACT(4)
SWITCH TACT(4)
SWITCH TACT(4)
SWITCH TACT(4)
SWITCH SAFE ON/OFF 4A/128A JVC(PANASONI)
THERMISTOR 3P

SN CODE EX CODE
AA
AC
AA
AC
AA
AB
AA
AE
AA
AB
AD
AM
AA
AC
AA
AC
AA
AB
AA
AB
AA
AB
AA
AA
AA
AA
AA
AA
AB
AG
AB
AG
AB
AG
AB
AG
AC
AG
AA
AC
AA
AC
AA
AC
AA
AC
AC
AH
AD
AM

How to update the Technical Information
appeared on this Service Manual
1. Web site: https://www.vestelservice.com
2. Select: Technical Support
3. Login: 101278
4. Password: SHPII278
By this access you can consult the latest schematic diagram or request the Parts Listing of a concrete Production Date / Serial Number.
By this way it can be also consulted the issued Technical Reports (Service Bulletins).

28LF-92EES

No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.

Technical information and Production:
Vestel Electronik AS

PRINTED BY:

ON:

Think Ecology, please use

Technical information re-issued:
SHARP ELECTRONICA ESPAÑA S.A.
Service Manual Group
Engineering Dept.
Polígono Industrial Can Sant Joan
08190 Sant Cugat del Vallès
Barcelona
Spain

RECYCLED PAPER
16

AK - 45
CHASSIS

SERVICE MANUAL
SE00AK45CHA00
Issued: 20th Jan. 2004

PAL B/G, I / SECAM L/L’, B/G, D/K SYSTEM COLOUR TELEVISION

CHASSIS

AK-45

In the interests of user safety (required by safety
regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.

CONTENTS
TABLE OF CONTENTS ....................................................................................................... 3
INTRODUCTION .................................................................................................................. 6
CIRCUIT DESCRIPTIONS ................................................................................................... 6
INTEGRATED CIRCUIT DESCRIPTIONS ....................................................................... 10
SERVICE MODE ADJUSTMENTS ...................................................................................... 23
BLOCK DIAGRAM ................................................................................................................ 61
CIRCUIT DIAGRAMS ..................................................................................................... 62
HOW TO UPDATE THE TECHNICAL INFORMATION ...................................................... 73

SHARP CORPORATION
1

This document has been published to
be used for after sales service only.

AK - 45
CHASSIS

SERVICE MANUAL UPDATE LOG SHEET
Technical Report No.
Technical Bulletin No.

Cause / Solution

Part No.

Page No.

Application
Data /Serial No.

Use this page to keep any special servicing information as Technical Report (Bulletin), Technical Information, etc.
If only part number changes are required, just change part number directly the part number in the Parts Listing Section.
If you need more information, please refer to the Technical Report (Bulletin).

2

AK - 45
CHASSIS

TABLE OF CONTENTS
1.INTRODUCTION ..............................................................................................................................6
2.TUNER.................................................................................................................................................6
3.IF PART (TDA9885/86) ..................................................................................................................6
4.VIDEO SWITCH TEA6415 ............................................................................................................7
5.MULTI STANDARD SOUND PROCESSOR ...........................................................................7
6.SOUND OUTPUT STAGE WITH TDA7269A .........................................................................7
7.VERTICAL OUTPUT STAGE WITH STV9379FA .................................................................7
8.VIDEO OUTPUT AMPLIFIER TDA6108...................................................................................7
9.POWER SUPPLY (SMPS) ............................................................................................................8
10.MICROCONTROLLER SDA55XX ...........................................................................................8

10.1.General Features ..........................................................................................................................8
10.2.External Crystal and Programmable Clock Speed ...................................................................8
10.3.Microcontroller Features .............................................................................................................8
10.4.Memory..........................................................................................................................................8
10.5.Display Features...........................................................................................................................8
10.6.Acquisition Features....................................................................................................................9
10.7.Ports ..............................................................................................................................................9
11.CLASS AB STEREO HEADPHONE DRIVER TDA1308 .................................................9
12.SAW FILTERS ................................................................................................................................9
13.IC DESCRIPTIONS .....................................................................................................................10
13.1.LM317T ....................................................................................................................................10
13.1.1.Description...........................................................................................................................10
13.1.2.Features................................................................................................................................10
13.2.TDA1308T ...............................................................................................................................10
13.2.1.General Description ............................................................................................................10
13.2.2.Features................................................................................................................................10
13.2.3.Pinning..................................................................................................................................11
13.3.MSP34X0G (MSP3410G) ..................................................................................................11
13.3.1.Description...........................................................................................................................11
13.3.2.Features................................................................................................................................12
13.3.3.Pin connections...................................................................................................................12
13.4.VDP313xY ..............................................................................................................................13
13.4.1.Introduction..........................................................................................................................13
13.4.2.Features................................................................................................................................14
13.4.3.Pin Connections and short descriptions ..........................................................................14
13.5.TEA6415C ..............................................................................................................................15
13.5.1.General Description ............................................................................................................15
13.5.2.Features................................................................................................................................15
13.5.3.Pinning..................................................................................................................................16
13.6.STV9379FA ............................................................................................................................16
13.6.1.Description...........................................................................................................................16
13.6.2.Features................................................................................................................................16
13.6.3.Pinning..................................................................................................................................16
13.7.TDA7269A ..............................................................................................................................17
13.7.1.Description...........................................................................................................................17
13.7.2.Features................................................................................................................................17
13.8.LM7800 (LM7805/LM7808) ...............................................................................................17
13.8.1.Description...........................................................................................................................17
13.8.2.Features................................................................................................................................17
13.9.AT24C08 .................................................................................................................................17
13.9.1.Description...........................................................................................................................17
13.9.2.Features................................................................................................................................17
13.9.3.Pin Configurations ..............................................................................................................18

3

AK - 45
CHASSIS

13.10.SDA5555 ...............................................................................................................................18

13.10.1.General definition ..............................................................................................................18
13.10.2.Features..............................................................................................................................18
13.11.MC44608 ...............................................................................................................................19
13.11.1.Description.........................................................................................................................19
13.11.2.General Features ...............................................................................................................20
13.11.3.Pin Connections ................................................................................................................20
13.12.TCET1102G .........................................................................................................................21
13.12.1.Description.........................................................................................................................21
13.12.2.Applications .......................................................................................................................21
13.12.3.Features..............................................................................................................................21
13.13.TDA9885T ............................................................................................................................21
13.13.1.General Description ..........................................................................................................21
13.13.2.Features..............................................................................................................................21
13.13.3.Pinning................................................................................................................................22
13.14.PI5V330 .................................................................................................................................22
13.14.1.General Description ..............................................................................................................22
14.AK45 CHASSIS PRODUCTION SERVICE MODE ADJUSTMENTS .........................23
14.1.SERVICE MENU ..........................................................................................................................23
14.2.ADJUST MENU ...........................................................................................................................23
14.3.OPTIONS MENU..........................................................................................................................35
Option 0. Video Processor Crystal Indication .............................................................................35
Option 1. (0x01) Video Processor Decoder Mode Register........................................................35
Option 2. (0x18) Video Processor Blanking Control ...................................................................35
Option 3. (0x19) Video Processor Cathode Drive Level .............................................................36
Option 4. ..........................................................................................................................................36
Option 5. CTI Available, Mono AVL...............................................................................................36
Option 6. ..........................................................................................................................................36
Option 7. OPTIONHOTELACTIVE, PLL_VST, PIP Zoom Mode, PIP Position ...........................36
Option 8. IF Frequency...................................................................................................................37
Option 9. Standard Available.........................................................................................................37
Option 10. Scart, Combfilter, Teletext, Language .......................................................................38
Option 11. PLL Tuner Control 1 Byte............................................................................................38
Option 12. PLL Tuner Control 2 Low Byte ...................................................................................38
Option 13. PLL Tuner Control 2 Mid Byte ....................................................................................39
Option 14. PLL Tuner Control 2 High Byte ..................................................................................39
Option 15. PLL Tuner VHF LOW – VHF HIGH Crossover Low Byte ..........................................39
Option 16. PLL Tuner VHF LOW – VHF HIGH Crossover High Byte .........................................39
Option 17. PLL Tuner VHF HIGH – UHF Crossover Low Byte ...................................................39
Option 18. PLL Tuner VHF HIGH – UHF Crossover High Byte...................................................39
Option 19. PIP PLL Tuner Control 1 Byte.....................................................................................40
Option 20. PIP PLL Tuner Control 2 Low Byte ............................................................................40
Option 21. PIP PLL Tuner Control 2 Mid Byte .............................................................................40
Option 22. PIP PLL Tuner Control 2 High Byte............................................................................40
Option 23. PIP PLL Tuner VHF LOW – VHF HIGH Crossover Low Byte ...................................40
Option 24. PIP PLL Tuner VHF LOW – VHF HIGH Crossover High Byte...................................40
Option 25. PIP PLL Tuner VHF HIGH – UHF Crossover Low Byte.............................................41
Option 26. PIP PLL Tuner VHF HIGH – UHF Crossover High Byte............................................41
Option 27. Language Available 1 ..................................................................................................41
Option 28. Language Available 2 ..................................................................................................41
Option 29. Language Available 3 and Zoom Mode Available ....................................................41
Option 30. Country .........................................................................................................................42
Option 31. Prescaler MSP FM (AVL=OFF)....................................................................................42
Option 32. Prescaler MSP NICAM (AVL=OFF) .............................................................................42
Option 33. Prescaler MSP SCART (AVL=OFF) ............................................................................43
Option 34. Prescaler MSP I2S (AVL=OFF)....................................................................................43
Option 35. Not used........................................................................................................................43
Option 36. Not used........................................................................................................................43
Option 37. Reserved for USA ........................................................................................................43
Option 38. TV Teletext Mode Selection, Child Lock, Equalizer Country...................................43

4

AK - 45
CHASSIS

Option 39. Personal Preference Equalizer Band 1 ......................................................................44
Option 40. Personal Preference Equalizer Band 2 ......................................................................44
Option 41. Personal Preference Equalizer Band 3 ......................................................................44
Option 42. Personal Preference Equalizer Band 4 ......................................................................44
Option 43. Personal Preference Equalizer Band 5 ......................................................................44
Option 44. Sound Effect (Standard; Music; Speech; Jazz; Pp) .................................................44
Option 45. Volume Offset Left .......................................................................................................44
Option 46. Volume Offset Right ....................................................................................................44
Option 47. Volume Offset Center ..................................................................................................45
Option 48. Volume Offset Rear......................................................................................................45
Option 49. Surround Delay ............................................................................................................45
Option 50. FM Prescaler.................................................................................................................45
Option 51. NICAM Prescaler ..........................................................................................................45
Option 52. Scart Input Prescaler ...................................................................................................45
Option 53. I2S Prescaler ................................................................................................................45
Option 54. Scart Output Prescaler ................................................................................................45
Option 55. Speaker Setup .............................................................................................................46
Option 56. Audio Options Available Or Not .................................................................................46
Option 57. Stereo Threshold .........................................................................................................46
Option 58. MSP Audio Flags..........................................................................................................47
Option 59. NICAM Threshold.........................................................................................................47
Option 60. Power Delay Time ........................................................................................................47
14.4.OPTION TABLE RECOMMENDED VALUES.............................................................................50
14.5.SCREEN ADJUSTMENT (FBT SCREEN) ..................................................................................52
14.6.GEOMETRY ADJUSTMENT .......................................................................................................53
4:3 FORMATS..................................................................................................................................53
16:9 FORMATS................................................................................................................................54
15.BLOCK DIAGRAM ......................................................................................................................61
16.CIRCUIT DIAGRAMS.................................................................................................................62
17. HOW TO UPDATE THE TECHNICAL INFORMATION ………………………………… 73
17.1. HOW TO UPDATE THE TECHNICAL INFORMATION APPEARED ON THIS SERVICE
MANUAL (AND RELATIVES) ....................................................................................................73
17.2. NVM / EEPROM RECORDER ....................................................................................................73
17.3. CHASSIS LABEL INFORMATION.............................................................................................73
17.4. CODE BAR LABEL INFORMATION..........................................................................................74

5

AK - 45
CHASSIS

1.INTRODUCTION
11AK45 is a 50Hz colour television capable of driving 24” + CRT sizes (beginning from 24” 16:9 up to
33”).
The chassis is capable of operation in PAL, SECAM, NTSC (playback) colour standards and multiple
transmission standards as B/G, D/K, I/I’, and L/L´.
Sound system output is supplying 2x10W (10%THD) for left and right outputs of 8ohm speakers.
TV supports FASTTEXT. It is possible to decode transmissions including high graphical data.
The chassis is equipped with three full EuroScarts; only one of them supports RGB input, one
headphone output, one FAV input, one SVHS input (via SCART)

2.TUNER
The hardware and software of the TV is suitable for tuners, supplied by different companies, which are
selected from the Service Menu. These tuners can be combined VHF, UHF tuners suitable for CCIR
systems B/G, H, L, L´, I/I´, and D/K. The tuning is available through the digitally controlled I2C bus
(PLL). Below you will find info on one of the Tuners in use.
General description of UV1316:
The UV1316 tuner belongs to the UV 1300 family of tuners, which are designed to meet a wide range
of applications. It is a combined VHF, UHF tuner suitable for CCIR systems B/G, H, L, L’, I and I’. The
low IF output impedance has been designed for direct drive of a wide variety of SAW filters with
sufficient suppression of triple transient.
Features of UV1316:
1. Member of the UV1300 family small sized UHF/VHF tuners
2. Systems CCIR: B/G, H, L, L’, I and I’; OIRT: D/K
3. Digitally controlled (PLL) tuning via I2C-bus
4. Off-air channels, S-cable channels and Hyperband
5. World standardized mechanical dimensions and world standard pinning
6. Compact size
7. Complies to “CENELEC EN55020” and “EN55013”
Pinning:
1. Gain control voltage (AGC)
2. Tuning voltage
3. I²C-bus address select
4. I²C-bus serial clock
5. I²C-bus serial data
6. Not connected
7. PLL supply voltage
8. ADC input
9. Tuner supply voltage
10. Symmetrical IF output 1
11. Symmetrical IF output 2

:

4.0V, Max: 4.5V

:
:
:

Max: 5.5V
Min:-0.3V, Max: 5.5V
Min:-0.3V, Max: 5.5V

:

5.0V, Min: 4.75V, Max: 5.5V

:

33V, Min: 30V, Max: 35V

3.IF PART (TDA9885/86)
The TDA9885 is an alignment-free single standard (without positive modulation) vision and sound IF signal
PLL.
The TDA9886 is an alignment-free multistandard (PAL, SECAM and NTSC) vision and sound IF signal PLL
Both devices can be used for TV, VTR, PC and set-top box applications.
The following figure shows the simplified block diagram of the integrated circuit.
The integrated circuit comprises the following functional blocks:
VIF amplifier, Tuner and VIF-AGC, VIF-AGC detector, Frequency Phase-Locked Loop (FPLL) detector, VCO
and divider, Digital acquisition help and AFC, Video demodulator and amplifier, Sound carrier trap, SIF
amplifier, SIF-AGC detector, Single reference QSS mixer, AM demodulator, FM demodulator and acquisition
help, Audio amplifier and mute time constant, I2C-bus transceivers and MAD (module address), Internal
voltage stabilizer.

6

AK - 45
CHASSIS

VIF-PLL
filter

TOP

TAGC

VAGC (1)

VPLL

REF

AFC

14 (15)

16 (17)

19 (21)

15 (16)

21 (23)

CAGC(neg)

2 (31)

VIF1

1 (30)

external reference signal
or 4 MHz crystal

9 (8)

TUNER AGC

VIF2

ull pagewidth

CVAGC(pos)

CBL

VIF-AGC

DIGITAL VCO CONTROL

RC VCO

AFC DETECTOR

SOUND CARRIER
TRAPS
4.5 to 6.5 MHz

VIF-PLL

(18) 17

video output: 2 V (p-p)
[1.1 V (p-p) without trap]

TDA9885
TDA9886

SIF2

24 (27)

SIF1

23 (26)

SINGLE REFERENCE QSS MIXER
INTERCARRIER MIXER
AND AM DEMODULATOR

CVBS

AUDIO PROCESSING
AND SWITCHES

(7) 8

AUD

(3) 5

DEEM
de-emphasis
network

MAD
(4) 6
SUPPLY

SIF-AGC

OUTPUT
PORTS

audio output

NARROW-BAND
FM-PLL DEMODULATOR

I 2C-BUS TRANSCEIVER

AFD
CAF

CAGC

20 (22)

18 (20)

(6, 12, 13, 14, 17,
19, 25, 28, 29, 32)
13

VP

AGND

n.c.

3 (1)

22 (24) 11 (10)

OP1

OP2

SCL

10 (9)

7 (5)

12 (11)

4 (2)

SDA

DGND

SIOMAD

FMPLL

sound intercarrier output
and MAD select

MHC108

FM-PLL
filter

(1) Not connected for TDA9885.
Pin numbers for TDA9885HN and TDA9886HN in parenthesis.

4.VIDEO SWITCH TEA6415
In case of three or more external sources are used, the video switch IC TEA6415 is used. The main
function of this device is to switch 8 video-input sources on the 6 outputs.
Each output can be switched on only one of each input. On each input an alignment of the lowest level
of the signal is made (bottom of sync. top for CVBS or black level for RGB signals).
Each nominal gain between any input and output is 6.5dB.For D2MAC or Chroma signal the alignment
is switched off by forcing, with an external resistor bridge, 5VDC on the input. Each input can be used
as a normal input or as a MAC or Chroma input (with external Resistor Bridge). All the switching
possibilities are changed through the BUS. Driving 75ohm load needs an external resistor. It is possible
to have the same input connected to several outputs.

5.MULTI STANDARD SOUND PROCESSOR
The MSP 34x10G family of single-chip Multi-standard Sound Processors covers the sound processing
of all analog TV-Standards worldwide, as well as the NICAM digital sound standards. The full TV sound
processing, starting with analog sound IF signal-in, down to processed analog AF-out, is performed on
a single chip.
The DBX noise reduction, or alternatively, MICRONAS Noise Reduction (MNR) is performed alignment
free.

6.SOUND OUTPUT STAGE WITH TDA7269A
The TDA7269A is class AB dual Audio power amplifier assembled in the Multi-watt package, specially
designed for high quality sound application as Hi-Fi music centers and stereo TV sets.

7.VERTICAL OUTPUT STAGE WITH STV9379FA
The IC STV9379FA is the vertical deflection booster circuit. Two supply voltages, +14V and –14V are
needed to scan the inputs VERT+ and VERT-, respectively. And a third supply voltage, +60V for the
flyback limiting is needed. The vertical deflection coil is connected in series between the output and
feedback to the input.

8.VIDEO OUTPUT AMPLIFIER TDA6108
The TDA6108Q includes three video output amplifiers is intended to drive the three cathodes of a
colour picture tube.

7

AK - 45
CHASSIS

9.POWER SUPPLY (SMPS)
The DC voltages required at various parts of the chassis are provided by an SMPS transformer
controlled by the IC MC44608, which is designed for driving, controlling and protecting switching
transistor of SMPS. The transformer generates 145V for Horizontal output stage, +/-14V for audio
amplifier, 5V and 3.3V stand by voltage and 8V, 12V and 5V supplies for other different parts of the chassis.
An optocoupler is used to control the regulation of line voltage and stand-by power consumption. There
is a regulation circuit in secondary side. This circuit produces a control voltage according to the
changes in 145V DC voltage, via an optocoupler (TCET1102G) to pin3 of the IC.
During the switch on period of the transistor, energy is stored in the transformer. During the switch off
period energy is fed to the load via secondary winding. By varying switch-on time of the power
transistor, it controls each portion of energy transferred to the secondary side such that the output
voltage level remains nearly independent of load variations.

10.MICROCONTROLLER SDA55XX

10.1.General Features
• Feature selection via special function register
• Simultaneous reception of TTX, VPS, PDC, and WSS (line 23)
• Supply Voltage 2.5 and 3.3 V
• ROM version package PSDIP52-2, PMQFP64-1
• Romless version package PMQFP100-2, PLCC84-2
10.2.External Crystal and Programmable Clock Speed
• Single external 6MHz crystal, all necessary clocks are generated internally
• CPU clock speed selectable via special function registers.
• Normal Mode 33.33 MHz CPU clock, Power Save mode 8.33 MHz
10.3.Microcontroller Features
• 8bit 8051 instruction set compatible CPU.
• 33.33-MHz internal clock (max.)
• 0.360 ms (min.) instruction cycle
• Two 16-bit timers
• Watchdog timer
• Capture compare timer for infrared remote control decoding
• Pulse width modulation unit (2 channels 14 bit, 6 channels 8 bit)
• ADC (4 channels, 8 bit)
• UART (rxd, txd)
10.4.Memory
• Non-multiplexed 8-bit data and 16 … 20-bit address bus (ROMless Version)
• Memory banking up to 1Mbyte (Romless version)
• Up to 128 Kilobyte on Chip Program ROM
• Eight 16-bit data pointer registers (DPTR)
• 256-bytes on-chip Processor Internal RAM (IRAM)
• 128bytes extended stack memory.
• Display RAM and TXT/VPS/PDC/WSS-Acquisition-Buffer directly accessible via MOVX
• UP to 16KByte on Chip Extended RAM (XRAM) consisting of;
- 1 Kilobyte on-chip ACQ-buffer-RAM (access via MOVX)
- 1 Kilobyte on-chip extended-RAM (XRAM, access via MOVX) for user software
- 3 Kilobyte Display Memory
10.5.Display Features
• ROM Character Set Supports all East and West European Languages in single device
• Mosaic Graphic Character Set
• Parallel Display Attributes
• Single/Double Width/Height of Characters
• Variable Flash Rate
• Programmable Screen Size (25 Rows x 33...64 Columns)
• Flexible Character Matrixes (HxV) 12 x 9...16
• Up to 256 Dynamical Redefinable Characters in standard mode; 1024 Dynamical Redefinable
Characters in Enhanced Mode
• CLUT with up to 4096 colour combinations

8

AK - 45
CHASSIS

• Up to 16 Colours per DRCS Character
• One out of Eight Colours for Foreground and Background Colours for 1-bit DRCS and ROM
Characters
• Shadowing
• Contrast Reduction
• Pixel by Pixel Shiftable Cursor With up to 4 Different Colours
• Support of Progressive Scan and 100 Hz.
• 3 X 4Bits RGB-DACs On-Chip
• Free Programmable Pixel Clock from 10 MHz to 32MHz
• Pixel Clock Independent from CPU Clock
• Multinorm H/V-Display Synchronization in Master or Slave Mode
10.6.Acquisition Features
• Multi-standard Digital Data Slicer
• Parallel Multi-norm Slicing (TTX, VPS, WSS, CC, G+)
• Four Different Framing Codes Available
• Data Caption only limited by available Memory
• Programmable VBI-buffer
• Full Channel Data Slicing Supported
• Fully Digital Signal Processing
• Noise Measurement and Controlled Noise Compensation
• Attenuation Measurement and Compensation
• Group Delay Measurement and Compensation
• Exact Decoding of Echo Disturbed Signals
10.7.Ports
• One 8-bit I/O-port with open drain output and optional I2C Bus emulation support (Port0)
• Two 8-bit multifunction I/O-ports (Port1, Port3)
• One 4-bit port working as digital or analogue inputs for the ADC (Port2)
• One 2-bit I/O port with secondary function (P4.2, 4.3, 4.7)
• One 4-bit I/O-port with secondary function (P4.0, 4.1, 4.4) (Not available in P-SDIP 52)

11.CLASS AB STEREO HEADPHONE DRIVER TDA1308
The TDA1308 is an integrated class AB stereo headphone driver contained in a DIP8 plastic package.
The device is fabricated in a 1 mm CMOS process and has been primarily developed for portable digital
audio applications.

12.SAW FILTERS
K3953M:
Standard
B/G, D/K, I, L/L’
Features
TV IF filter with Nyquist slopes at 33,90 MHz and 38,90 MHz
Constant group delay
Suitable for CENELEC EN 55020
Terminals
Tinned CuFe alloy
Pin configuration
1 Input
2 Input - ground
3 Chip carrier - ground
4 Output
5 Output

K3958M:

Standard
B/G, D/K, I, L/L’
Features
TV IF filter with Nyquist slopes at 33.90 MHz and 38.90 MHz
Constant group delay
Terminal and Pin configuration are the same with K3953M

9

AK - 45
CHASSIS

K9356M:

Standard
B/G, D/K, I, L
Features
TV IF audio filter with pass band for sound carriers at 32,40 MHz (D/K, L), 32,90 MHz (I) and 33,40 MHz
(B/G)
Terminal and Pin configuration are the same with K3953M

K9656M:

Standard
B/G, D/K, I, L/L’
Features
TV IF audio filter with two channels
Channel 1 (L’) with one pass band for sound carriers at 40,40 MHz (L’) and 39,75 MHz (L’- NICAM)
Channel 2 (B/G, D/K, L, I) with one pass band for sound carriers between 32,35 MHz and 33,40 MHz
Terminal and Pin configuration are the same with K3953M

13.IC DESCRIPTIONS
LM317T
MSP3410G
TEA6415
TDA7269A
24C08
MC44608
TDA9885T

TDA1308T
VDP3130Y
STV9379FA
LM7805/LM7808
SDA55XX
TCET1102G

13.1.LM317T
13.1.1.Description
The LM317T is an adjustable 3 terminal positive voltage regulator capable of supplying in excess of 1.5
amps over an output range of 1.25 to 37 volts. This voltage regulator is exceptionally easy to use and
requires only two external resistors to set the output voltage. Further, it employs internal current limiting,
thermal shutdown and safe area compensation, making it essentially blow–out proof. The LM317
serves a wide variety of applications including local, on card regulation. This device can also be used to
make a programmable output regulator, or by connecting a fixed resistor between the adjustment and
output, the LM317 can be used as a precision current regulator.
13.1.2.Features
• Output Current in Excess of 1.5 A
• Output Adjustable between 1.2 V and 37 V
• Internal Thermal Overload Protection
• Internal Short Circuit Current Limiting Constant with Temperature
• Output Transistor Safe–Area Compensation
• Floating Operation for High Voltage Applications
• Available in Surface Mount D2PAK, and Standard 3–Lead Transistor Package
• Eliminates Stocking many Fixed Voltages

13.2.TDA1308T
13.2.1.General Description
The TDA1308 is an integrated class AB stereo headphone driver contained in an SO8 or a DIP8 plastic
package. The device is fabricated in a 1 mm CMOS process and has been primarily developed for
portable digital audio applications. It gets its input from two analog audio outputs (DACA_L and
DACA_R) of MSP 34x0G. The gain of the output is adjustable by the feedback resistor between the
inputs and outputs.
13.2.2.Features
• Wide temperature range
• No switch ON/OFF clicks
• Excellent power supply ripple rejection

10

AK - 45
CHASSIS

• Low power consumption
• Short-circuit resistant
• High performance
• high signal-to-noise ratio
• High slew rate
• Low distortion
• Large output voltage swing.
13.2.3.Pinning
SYMBOL
OUTA
INA(neg)
INA(pos)
VSS
INB(pos)
INB(neg)
OUTB
VDD

PIN
1
2
3
4
5
6
7
8

DESCRIPTION
Output A
Inverting input A
Non-inverting input A
Negative supply
Non-inverting input B
Inverting input B
Output B
Positive supply

13.3.MSP34X0G (MSP3410G)
13.3.1.Description
The MSP 34x0G family of single-chip Multi standard Sound Processors covers the sound processing of
all analog TV-Standards worldwide, as well as the NICAM digital sound standards. The full TV sound
processing, starting with analog sound IF signal-in, down to processed analog AF-out, is performed on
a single chip. Figure shows a simplified functional block diagram of the MSP 34x0G.

ADC
Sound IF2

Demodulator

I2S1

Preprocessing

Prescale

I2S2

Source Select

Sound IF1

Loudspeaker
Sound
Processing

DAC

Headphone
Sound
Processing

DAC

Loudspeaker
Subwoofer

Headphone

I2S

SCART1
DAC
SCART2
SCART3

SCART
DSP
Input
Select

SCART1
ADC

Prescale

SCART4
MONO

DAC

SCART
Output
Select
SCART2

This new generation of TV sound processing ICs now includes versions for processing the multi
channel television sound (MTS) signal conforming to the standard recommended by the Broadcast
Television Systems Committee (BTSC). The DBX noise reduction, or alternatively, MICRONAS Noise
Reduction (MNR) is performed alignment free. Other processed standards are the Japanese FM-FM
multiplex standard (EIA-J) and the FM Stereo Radio standard. Current ICs have to perform adjustment
procedures in order to achieve good stereo separation for BTSC and EIA-J. The MSP 34x0G has
optimum stereo performance without any adjustments.
All MSP 34x0G versions are pin and software downward compatible to the MSP34x0D. The
MSP34x0G further simplifies controlling software. Standard selection requires a single I2C transmission
only.
The MSP 34x0G has built-in automatic functions: The IC is able to detect the actual sound standard
automatically (Automatic Standard Detection). Furthermore, pilot levels and identification signals can be
evaluated internally with subsequent switching between mono/stereo/bilingual; no I2C interaction is
necessary (Automatic Sound Selection).

11

AK - 45
CHASSIS

13.3.2.Features
Standard Selection with single I2C transmission
Automatic Standard Detection of terrestrial TV standards
Automatic Sound Selection (mono/stereo/bilingual), new registers MODUS, STATUS
Two selectable sound IF (SIF) inputs
Automatic Carrier Mute function
Interrupt output programmable (indicating status change)
Loudspeaker / Headphone channel with volume, balance, bass, treble, loudness
AVC: Automatic Volume Correction
Subwoofer output with programmable low-pass and complementary high-pass filter
5-band graphic equalizer for loudspeaker channel
Spatial effect for loudspeaker channel
Four Stereo SCART (line) inputs, one Mono input; two Stereo SCART outputs
Complete SCART in/out switching matrix
Two I2S inputs; one I2S output
Dolby Pro Logic with DPL 351xA coprocessor
All analog FM-Stereo A2 and satellite standards; AM-SECAM L standard
Simultaneous demodulation of (very) high-deviation FM-Mono and NICAM
Adaptive deemphasis for satellite (Wegener-Panda, acc. to ASTRA specification)
ASTRA Digital Radio (ADR) together with DRP 3510A
All NICAM standards
Korean FM-Stereo A2 standard
13.3.3.Pin connections
NC = not connected; leave vacant
LV = if not used, leave vacant
X = obligatory; connect as described in circuit diagram
DVSS: if not used, connect to DVSS
AHVSS: connect to AHVSS
Pin No.

Pin Name

Type

OUT

Connection
(if not used)

PLCC
68-pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

PSDIP
64-pin
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
-

PSDIP
52-pin
14
13
12
11
10
9
8
7
6
5
4
3
-

PQFP
80-pin
9
8
7
6
5
4
3
2
1
80
79
78
77
76
75
-

PLQFP
64-pin
8
7
6
5
4
3
2
1
64
63
62
61
60
59
58
-

ADR_WS
NC
ADR_DA
I2S_DA_IN1
I2S_DA_OUT
I2S_WS
I2S_CL
I2C_DA
I2C_CL
NC
STANDBYQ
ADR_SEL
D_CTR_I/O_0
D_CTR_I/O_1
NC
NC
NC

18

1

2

74

57

AUD_CL_OUT

OUT

LV

19
20
21
22

64
63
62
61

1
52
51
50

73
72
71
70

56
55
54
53

TP
XTAL_OUT
XTAL_IN
TESTEN

OUT
IN
IN

LV
X
X
X

23

60

49

69

52

ANA_IN2+

IN

AVSS via 56
pF/LV

24

59

48

68

51

ANA_IN-

IN

AVSS via 56
pF/LV

25
26
-

58
57
-

47
46
-

67
66
65

50
49
-

ANA_IN1+
AVSUP
AVSUP

IN

12

OUT
IN
OUT
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN
IN
IN/OUT
IN/OUT

LV
LV
LV
LV
LV
LV
LV
X
X
LV
X
X
LV
LV
LV
LV
LV

LV
X
X

Short Description

ADR word strobe
Not connected
ADR Data Output
2
I S1 data input
2
I S data output
2
I S word strobe
2
I S clock
2
I C data
2
I C data
Not connected
Stand-by (low-active)
2
I C bus address select
D_CTR_I/O_0
D_CTR_I/O_1
Not connected
Not connected
Not connected
Audio clock output
(18.432 MHz)
Test pin
Crystal oscillator
Crystal oscillator
Test pin
IF Input 2 (can be
vacant, only if IF input
also not in use)
IF common (can be
vacant, only if IF input
also not in use)
IF input 2
Analog power supply 5v
Analog power supply 5v

left
1 is
left
1 is

AK - 45
CHASSIS

27
28
-

56
55
-

45
44
-

64
63
62
61
60
59

48
47
-

NC
NC
AVSS
AVSS
MONO_IN
NC

29

54

43

58

46

VREFTOP

30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68

53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17

42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15

57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10

45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9

SC1_IN_R
SC1_IN_L
ASG1
SC2_IN_R
SC2_IN_L
ASG2
SC3_IN_R
SC3_IN_L
ASG4
SC4_IN_R
SC4_IN_L
NC
AGNDC
AHVSS
AHVSS
NC
NC
CAPL_M
AHVSUP
CAPL_A
SC1_OUT_L
SC1_OUT_R
VREF1
SC2_OUT_L
SC2_OUT_R
NC
NC
DACM_SUB
NC
DACM_L
DACM_R
VREF2
DACA_L
DACA_R
NC
NC
RESETQ
NC
NC
NC
I2S_DA_IN2
DVSS
DVSS
DVSS
DVSUP
DVSUP
DVSUP
ADR_CL

IN

LV
LV
X
X
LV
LV
X

IN
IN
IN
IN
IN
IN
IN
IN

OUT
OUT
OUT
OUT

OUT
OUT
OUT
OUT
OUT

IN

IN

OUT

LV
LV
AHVSS
LV
LV
AHVSS
LV
LV
AHVSS
LV
LV
LV or AHVSS
X
X
X
LV
LV
X
X
X
LV
LV
X
LV
LV
LV
LV
LV
LV
LV
LV
X
LV
LV
LV
LV
X
LV
LV
LV
LV
X
X
X
X
X
X
LV

Not connected
Not connected
Analog ground
Analog ground
Mono input
Not connected
Reference voltage IF A/D
converter
SCART 1 input, right
SCART 1 input, left
Analog Shield Ground 1
SCART 2 input, right
SCART 2 input, left
Analog Shield Ground 2
SCART 3 input, right
SCART 3 input, left
Analog Shield Ground 4
SCART 4 input, right
SCART 4 input, left
Not connected
Analog reference voltage
Analog ground
Analog ground
Not connected
Not connected
Volume capacitor MAIN
Analog power supply 8V
Volume capacitor AUX
SCART output 1, left
SCART output 1, right
Reference ground 1
SCART output 2, left
SCART output 2, right
Not connected
Not connected
Subwoofer output
Not connected
Loudspeaker out, left
Loudspeaker out, right
Reference ground 2
Headphone out, left
Headphone out, right
Not connected
Not connected
Power-on-reset
Not connected
Not connected
Not connected
2
I S2-data input
Digital ground
Digital ground
Digital ground
Digital power supply 5V
Digital power supply 5V
Digital power supply 5V
ADR clock

13.4.VDP313xY
13.4.1.Introduction
The VDP 313xY is a video IC family of high-quality single-chip video processors. Modular design and a
sub-micron technology allow the economic integration of features in all classes of TV sets. The VDP
313xY family is based on the VDP 31xxB including YCRCB inputs for DVD component signals.
The VDP 313xY includes complete video, display and deflection processing. All processing is done
digitally, the video front-end and video backend are interfacing to the analog world. Most functions of
the VDP can be controlled by software via I2C-Bus interface

13

AK - 45
CHASSIS

13.4.2.Features
Video Decoding and Processing
– four CVBS, one S-VHS input, one YC R C B component input
– integrated high-quality A/D converters and associated clamp and AGC circuits
– adaptive 2H comb filter Y/C separator
– multistandard colour decoder PAL/NTSC/SECAM including all substandards
– multistandard sync decoder
– automatic standard recognition
– black-line detector
– linear horizontal scaling (0.25...4), as well as non-linear horizontal scaling “Panoramavision”
– black-level expander
– dynamic peaking
– soft limiter (gamma correction)
– colour transient improvement
RGB Processing and Deflection
– programmable RGB matrix
– two analog RGB / Fastblank inputs
– half-contrast switch
– picture frame generator
– scan velocity modulation output
– high-performance H/V deflection
– separate ADC for tube measurements
– EHT compensation
– angle and bow correction
– one 20.25 MHz crystal, few external components
–I2C-Bus Interface
– 64-pin PSDIP package
13.4.3.Pin Connections and short descriptions
NC = not connected
X = obligatory; connect as described in circuit diagram
OUT = Output
Pin no
PSDIP 64-pin
1
2
3
4
5
6
7
8
9

Pin name

Type

TEST
RESQ
SCL
SDA
GNDD
HCS
FSY
CSY
VS

IN
IN
IN/OUT
IN/OUT
SUPPLY
IN
OUT
OUT
OUT

Connection
(if not used)
GNDD
X
X
X
X
LV
LV
LV
LV

10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

INTLC
VPROT
SAFETY
HFLB
GNDD
VSUPD
GNDD
VSUPD
P0
P1
P2
P3
P4
P5
P6

OUT
IN
IN
IN
SUPPLY
SUPPLY
SUPPLY
SUPPLY
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN/OUT

LV
GNDAB
GNDAB
HOUT
X
X
X
LV
LV
LV
GNDD
GNDD
GNDD
GNDD
GNDD

14

LV = if not used, leave vacant
IN = Input
SUPPLY = Supply Pin
Short description
Test Input
Reset Input
2
I C Bus Clock
2
I C Bus Data
Digital Ground
Half Contrast Switch Input
Front Sync Output
Composite Sync Output
Vertical Sync Output
(=VS Bit of MSY for TPU)
Interface Control Output
Vertical Protection Input
Safety Input
Horizontal Flyback Input
Digital Ground
Digital Supply Voltage (3.3V)
Digital Ground
Digital Supply Voltage (3.3V)
Port 1, Bit 0
Port 1, Bit 1
Port 1, Bit 2
Port 1, Bit 3
Port 1, Bit 4
Port 1, Bit 5
Port 1, Bit 6

AK - 45
CHASSIS

25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64

GNDD
RSW2
RSW1
SENSE
GNDM
VERTQ
VERT
E/w
XREF
SVMOUT
GNDAB
VSUPAB
ROUT
GOUT
BOUT
VRD
RIN
GIN
BIN
FBLIN
RIN2
GIN2
BIN2
FBLIN2
CLK20
HOUT
XTAL 1
XTAL 2
CIN 2/CRIN
CBIN
GNDAF
SGND
VRT
VSUPAF
VOUT
CIN1
VIN1
VIN2
VIN3
VIN4

SUPPLY
OUT
OUT
IN
SUPPLY
OUT
OUT
OUT
IN
OUT
SUPPLY
SUPPLY
OUT
OUT
OUT
IN
IN
IN
IN
IN
IN
IN
IN
IN
OUT
OUT
IN
OUT
IN
SUPPLY
IN
IN
SUPPLY
OUT
IN
IN
IN
IN
IN

X
GNDAB
GNDAB
GNDAB
X
LV
LV
LV
X
VSUPAB
X
X
VSUPAB
VSUPAB
VSUPAB
X
GNDAB
GNDAB
GNDAB
GNDAB
GNDAB
GNDAB
GNDAB
GNDAB
LV
X
X
X
LV
LV
X
GNDAF
X
X
LV
VRT
VRT
VRT
VRT
VRT

Digital Ground
Range Switch 2 for Measurement ADC
Range Switch 1 for Measurement ADC
Sense ADC Input
Ground, MADC Input
Inverted Vertical Sawtooth Output
Vertical Sawtooth Output
Vertical Parabola Output
Reference Input for RGB DACs
Analog Scan Velocity Modulation Output
Analog Ground Backend
Analog Supply Voltage (5.0V) Backend
Analog Red Output
Analog Green Output
Analog Blue Output
DAC Reference
Analog Red Input
Analog Green Input
Analog Blue Input
Fast Blank Input
Analog Red Input2
Analog Green Input2
Analog Blue Input2
Fast Blank Input2
20.25 MHz System Clock Output
Horizontal Drive Output
Analog Crystal Input
Analog Crystal Output
Analog Chroma 2/Component CR Input
Component CB Input
Analog Ground Front-end
Signal Ground for Analog Input
Reference Voltage Top, Video ADC
Analog Supply Voltage (5.0V) Front-end
Analog Video Output
Analog Chroma 1 Input
Analog Video 1 Input
Analog Video 2 Input
Analog Video 3 Input
Analog Video 4 Input

13.5.TEA6415C
13.5.1.General Description
The main function of the IC is to switch 8 video input sources on 6 outputs. Each output can be
switched on only one of each input. On each input an alignment of the lowest level of the signal is made
(bottom of synch. top for CVBS or black level for RGB signals). Each nominal gain between any input
and output is 6.5dB. For D2MAC or Chroma signal the alignment is switched off by forcing, with an
external resistor bridge, 5 VDC on the input. Each input can be used as a normal input or as a MAC or
Chroma input (with external resistor bridge). All the switching possibilities are changed through the
BUS. Driving 75Ÿ load needs an external transistor. It is possible to have the same input connected to
several outputs. The starting configuration upon power on (power supply: 0 to 10V) is undetermined. In
this case, 6 words of 16 bits are necessary to determine one configuration. In other case, 1 word of 16
bits is necessary to determine one configuration.
13.5.2.Features
• 20MHz Bandwidth
• Cascadable with another TEA6415C (Internal address can be changed by pin 7 voltage)
• 8 Inputs (CVBS, RGB, MAC, CHROMA,...)
• 6 Outputs
• Possibility of MAC or chroma signal for each input by switching-off the clamp with an external resistor
bridge
• Bus controlled

15

AK - 45
CHASSIS

• 6.5dB gain between any input and output
• 55dB crosstalk at 5mHz
• Fully ESD protected
13.5.3.Pinning
1. Input:
Max: 2Vpp, Input Current: 1mA, Max: 3mA
2. Data :
Low level: -0.3V Max: 1.5V,
High level: 3.0V
Max: Vcc+0.5V
3. Input:
Max: 2Vpp, Input Current: 1mA, Max: 3mA
4. Clock:
Low level : -0.3V Max: 1.5V,
High level: 3.0V
Max: Vcc+0.5V
5. Input:
Max : 2Vpp, Input Current: 1mA, Max: 3mA
6. Input:
Max: 2Vpp, Input Current: 1mA, Max: 3mA
7. Prog
8. Input:
Max : 2Vpp, Input Current: 1mA, Max: 3mA
9. Vcc:
12V
10. Input:
Max : 2Vpp, Input Current: 1mA, Max: 3mA
11. Input:
Max : 2Vpp, Input Current: 1mA, Max: 3mA
12. Ground
13. Output: 5.5Vpp, Min: 4.5Vpp
14. Output: 5.5Vpp, Min: 4.5Vpp
15. Output: 5.5Vpp, Min: 4.5Vpp
16. Output: 5.5Vpp, Min: 4.5Vpp
17. Output: 5.5Vpp, Min: 4.5Vpp
18. Output: 5.5Vpp, Min: 4.5Vpp
19. Ground
20. Input:
Max: 2Vpp, Input Current: 1mA, Max: 3mA

13.6.STV9379FA
13.6.1.Description
Designed for monitors and high performance TVs, the STV9379FA vertical deflection booster can
handle flyback voltage up to 90V. Further to this, it is possible to have a flyback voltage, which is more
than the double of the supply (Pin 2). This allows to decrease the power consumption, or to decrease
the flyback time for a given supply voltage. The STV9379FA operates with supplies up to 42V and
provides up to 2.6APP output current to drive the yoke. The STV9379FA is offered in HEPTAWATT
package.
13.6.2.Features
Power Amplifier
Thermal Protection
Output Current Up To 2.6APP
Flyback Voltage Up To 90V (on Pin 5)
Suitable For DC Coupling Application
External Flyback Supply
13.6.3.Pinning
Pin1 : Output Stage Supply
Pin2 : Output
Pin3 : GND or Negative Supply
Pin4 : Flyback Supply
Pin5 : Supply Voltage
Pin6 : Inverting Input
Pin7 : Non-inverting Input

16

AK - 45
CHASSIS

13.7.TDA7269A
13.7.1.Description
The TDA7269A is class AB dual Audio power amplifier assembled in the Multiwatt package, specially
designed for high quality sound application as Hi-Fi music centers and stereo TV sets.
13.7.2.Features
Wide Supply Voltage Range Up To ±20V
Split Supply
High Output Power
14 + 14W @THD =10%, RL =ȍ,VS= +16V
No Pop at Turn-On/Off
Mute (Pop Free)
Stand-By Feature (Low Iq)
Short Circuit Protection To Gnd
Thermal Overload Protection

13.8.LM7800 (LM7805/LM7808)
13.8.1.Description
The L7800 series of three-terminal positive regulators is available in TO-220 TO-220FP TO-3 and D 2
PAK packages and several fixed output voltages, making it useful in a wide range of applications.
These regulators can provide local on-card regulation, eliminating the distribution problems associated
with single point regulation. Each type employs internal current limiting, thermal shutdown and safe
area protection, making it essentially indestructible. If adequate heat sinking is provided, they can
deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices
can be used with external components to obtain adjustable voltages and currents.
13.8.2.Features
Output Current Up To 1.5 A
Output Voltages of 5; 5.2; 6; 8; 8.5; 9; 12; 15; 18; 24V
Thermal Over load protection
Short Circuit Protection
Output Transition SOA Protection

13.9.AT24C08
13.9.1.Description
The AT24C01A/02/04/08/16 provides 1024/2048/4096/8192/16384 bits of serial electrically erasable
and programmable read-only memory (EEPROM) organized as 128/256/512/1024/2048 words of 8 bits
each. The device is optimized for use in many industrial and commercial applications where low-power
and low-voltage operation are essential. The AT24C01A/02/04/08/16 is available in space-saving 8-pin
PDIP, (AT24C01A/02/04/08/16), 8-lead TSSOP (AT24C01A/02/04/08/16) and 8-lead JEDEC SOIC
(AT24C01A/02/04/08/16) packages and is accessed via a 2-wire serial interface. In addition, the entire
family is available in 5.0V (4.5V to 5.5V), 2.7V (2.7V to 5.5V), 2.5V (2.5V to 5.5V) and 1.8V (1.8V to
5.5V) versions.
13.9.2.Features
• Low-voltage and Standard-voltage Operation
– 5.0 (V CC = 4.5V to 5.5V)
– 2.7 (V CC = 2.7V to 5.5V)
– 2.5 (V CC = 2.5V to 5.5V)
– 1.8 (V CC = 1.8V to 5.5V)
• Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K), 1024 x 8 (8K) or 2048 x 8 (16K)
• 2-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bi-directional Data Transfer Protocol
• 100 kHz (1.8V, 2.5V, 2.7V) and 400 kHz (5V) Compatibility
• Write Protect Pin for Hardware Data Protection

17

AK - 45
CHASSIS

• 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
• Partial Page Writes are Allowed
• Self-timed Write Cycle (10 ms max)
• High-reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
• Automotive Grade and Extended Temperature Devices Available
• 8-lead JEDEC SOIC, 8-pin PDIP and 8-lead TSSOP Packages
13.9.3.Pin Configurations
Pin name
A0-A2
SDA
SCL
WP
NC

Function
Address Inputs
Serial Data
Serial Clock Input
Write Protect
No Connect

13.10.SDA5555
13.10.1.General definition
The SDA55XX is a single chip teletext decoder for decoding World System Teletext data as well as
Video Programming System (VPS), Program Delivery Control (PDC), and Wide Screen Signalling
(WSS) data used for PAL plus transmissions (Line 23). The device also supports Closed caption
acquisition and decoding. The device provides an integrated general-purpose, fully 8051-compatible
Microcontroller with television specific hardware features. Microcontroller has been enhanced to
provide powerful features such as memory banking, data pointers, and additional interrupts etc. The onchip display unit for displaying Level 1.5 teletext data can also be used for customer defined on screen
displays. Internal XRAM consists of up to 16 Kbytes. Device has an internal ROM of up to 128 KBytes.
ROMless versions can access up to 1 MByte of external RAM and ROM. The SDA 55XX supports a
wide range of standards including PAL, NTSC and contains a digital slicer for VPS, WSS, PDC, TTX
and Closed Caption, an accelerating acquisition hardware module, a display generator for Level 1.5
TTX data and powerful On screen Display capabilities based on parallel attributes, and Pixel oriented
characters (DRCS).
13.10.2.Features
General
• Feature selection via special function register
• Simultaneous reception of TTX, VPS, PDC, and WSS (line 23)
• Supply Voltage 2.5 and 3.3 V
• ROM version package PSDIP52-2, PMQFP64-1
• Romless version package PMQFP100-2, PLCC84-2
External Crystal and Programmable Clock Speed
• Single external 6MHz crystal, all necessary clocks are generated internally
• CPU clock speed selectable via special function registers.
• Normal Mode 33.33 MHz CPU clock, Power Save mode 8.33 MHz
Microcontroller Features
• 8bit 8051 instruction set compatible CPU.
• 33.33-MHz internal clock (max.)
• 0.360ms (min.) instruction cycle
• Two 16-bit timers
• Watchdog timer
• Capture compare timer for infrared remote control decoding
• Pulse width modulation unit (2 channels 14 bit, 6 channels 8 bit)
• ADC (4 channels, 8 bit)
• UART

18

AK - 45
CHASSIS

Memory
• Non-multiplexed 8-bit data and 16 … 20-bit address bus (ROMless Version)
• Memory banking up to 1Mbyte (ROMless version)
• Up to 128 Kilobyte on Chip Program ROM
• Eight 16-bit data pointer registers (DPTR)
• 256-bytes on-chip Processor Internal RAM (IRAM)
• 128bytes extended stack memory.
• Display RAM and TXT/VPS/PDC/WSS-Acquisition-Buffer directly accessible via MOVX
• UP to 16KByte on Chip Extended RAM (XRAM) consisting of;
- 1 Kilobyte on-chip ACQ-buffer-RAM (access via MOVX)
- 1 Kilobyte on-chip extended-RAM (XRAM, access via MOVX) for user software
- 3 Kilobyte Display Memory
Display Features
• ROM Character Set Supports all East and West European Languages in single device
• Mosaic Graphic Character Set
• Parallel Display Attributes
• Single/Double Width/Height of Characters
• Variable Flash Rate
• Programmable Screen Size (25 Rows x 33...64 Columns)
• Flexible Character Matrixes (HxV) 12 x 9...16
• Up to 256 Dynamical Redefinable Characters in standard mode; 1024 Dynamical Redefinable
Characters in Enhanced Mode
• CLUT with up to 4096 colour combinations
• Up to 16 Colours per DRCS Character
• One out of Eight Colours for Foreground and Background Colours for 1-bit DRCS and ROM
Characters
• Shadowing
• Contrast Reduction
• Pixel by Pixel Shiftable Cursor With up to 4 Different Colours
• Support of Progressive Scan and 100 Hz.
• 3 X 4Bits RGB-DACs On-Chip
• Free Programmable Pixel Clock from 10 MHz to 32MHz
• Pixel Clock Independent from CPU Clock
• Multinorm H/V-Display Synchronization in Master or Slave Mode
Acquisition Features
• Multistandard Digital Data Slicer
• Parallel Multi-norm Slicing (TTX, VPS, WSS, CC, G+)
• Four Different Framing Codes Available
• Data Caption only Limited by available Memory
• Programmable VBI-buffer
• Full Channel Data Slicing Supported
• Fully Digital Signal Processing
• Noise Measurement and Controlled Noise Compensation
• Attenuation Measurement and Compensation
• Group Delay Measurement and Compensation
• Exact Decoding of Echo Disturbed Signals
Ports
• One 8-bit I/O-port with open drain output and optional I2C Bus emulation support (Port 0)
• Two 8-bit multifunction I/O-ports (Port 1, Port 3)
• One 4-bit port working as digital or analog inputs for the ADC (Port 2)
• One 2-bit I/O port with secondary functions (P4.2, 4.3, 4.7)
• One 4-bit I/O-port with secondary function (P4.0, 4.1, 4.4) (Not available in P-SDIP 52)

13.11.MC44608
13.11.1.Description
The MC44608 is a high performance voltage mode controller designed for off–line converters. This high
voltage circuit that integrates the start–up current source and the oscillator capacitor, requires few

19

AK - 45
CHASSIS

external components while offering a high flexibility and reliability. The device also features a very high
efficiency stand–by management consisting of an effective Pulsed Mode operation. This technique
enables the reduction of the stand–by power consumption to approximately 1W while delivering
300mW in a 150W SMPS.
• Integrated Start–Up Current Source
• Lossless Off–Line Start–Up
• Direct Off–Line Operation
• Fast Start–Up
13.11.2.General Features
• Flexibility
• Duty Cycle Control
• Under voltage Lockout with Hysteresis
• On Chip Oscillator Switching Frequency 40, or 75kHz
• Secondary Control with Few External Components
Protections
• Maximum Duty Cycle Limitation
• Cycle by Cycle Current Limitation
• Demagnetization (Zero Current Detection) Protection
• “Over VCC Protection” Against Open Loop
• Programmable Low Inertia Over Voltage Protection Against Open Loop
• Internal Thermal Protection
GreenLineTM Controller
• Pulsed Mode Techniques for a Very High Efficiency Low Power Mode
• Lossless Start-up
• Low dV/dT for Low EMI Radiations
13.11.3.Pin Connections
1

Isense

2

Control Input

3

8

44608Pxxx
AWL
YYWW

Demag

7
6

VCC

5

Driver

(Top View)
GND

4

Vi

(Top View)
AWL = Manufacturing Code
YYWW = Date Code

13.11.4.Pin Function description
Pin
1

Name
Demag

2

ISENSE

3

Control Input

4
5
6

Ground
Driver
VCC

7
8

Vi

Description
The Demag pin offers 3 different functions: Zero voltage crossing detection (50mV), 24mA current
detection and 120mA current detection. The 24mA level is used to detect the secondary
reconfiguration status and the 120mA level to detect an Over Voltage status called Quick OVP.
The Current Sense pin senses the voltage developed on the series resistor inserted in the source
of the power MOSFET. When I sense reaches 1V, the Driver output (pin 5) is disabled. This is
known as the Over Current Protection function. A 200mA current source is flowing out of the pin 3
during the start–up phase and during the switching phase in case of the Pulsed Mode of operation.
A resistor can be inserted between the sense resistor and the pin 3; thus a programmable peak
current detection can be performed during the SMPS stand–by mode.
A feedback current from the secondary side of the SMPS via the opto–coupler is injected into this
pin. A resistor can be connected between this pin and GND to allow the programming of the Burst
duty cycle during the Stand–by mode.
This pin is the ground of the primary side of the SMPS.
The current and slew rate capability of this pin are suited to drive Power MOSFETs.
This pin is the positive supply of the IC. The driver output gets disabled when the voltage becomes
higher than 15V and the operating range is between 6.6V and 13V. An intermediate voltage level
of 10V creates a disabling condition called Latched Off phase.
This pin is to provide isolation between the Vi pin 8 and the VCC pin 6.
This pin can be directly connected to a 500V voltage source for start–up function of the IC. During
the Start–up phase a 9 mA current source is internally delivered to the VCC pin 6 allowing a rapid
charge of the VCC capacitor. As soon as the IC starts–up, this current source is disabled.

20

AK - 45
CHASSIS

13.12.TCET1102G
13.12.1.Description
The TCET110/ TCET2100/ TCET4100 consists of a phototransistor optically coupled to a gallium
arsenide infrared-emitting diode in a 4-lead up to 16-lead plastic dual inline package. The elements are
mounted on one lead frame using a coplanar technique, providing a fixed distance between input and
output for highest safety requirements.
13.12.2.Applications
Circuits for safe protective separation against electrical shock according to safety class II (reinforced
isolation):
For appl. class I – IV at mains voltage ”300 V
For appl. class I – III at mains voltage ”600 V
According to VDE 0884, table 2, suitable for: Switch-mode power supplies, line receiver, computer
peripheral interface, and microprocessor system interface.
13.12.3.Features
VDE 0884 related features:
Rated impulse voltage (transient overvoltage) V IOTM = 8 kV peak
Isolation test voltage (partial discharge test voltage) V pd = 1.6 kV
Rated isolation voltage (RMS includes DC) V IOWM = 600 V RMS (848 V peak)
Rated recurring peak voltage (repetitive) V IORM = 600 V RMS
General features:
CTR offered in 9 groups
Isolation materials according to UL94-VO
Pollution degree 2 (DIN/VDE 0110 / resp. IEC 664)
Climatic classification 55/100/21 (IEC 68 part 1)
Special construction: Therefore, extra low coupling capacity of typical 0.2pF, high Common Mode
Rejection
Low temperature coefficient of CTR
G = Leadform 10.16 mm; provides creepage distance > 8 mm, for TCET2100/ TCET4100 optional;
suffix letter ‘G’ is not marked on the optocoupler
Coupling System U

13.13.TDA9885T
13.13.1.General Description
The TDA9885 is an alignment-free single standard (without positive modulation) vision and sound IF signal
PLL.

13.13.2.Features
5 V supply voltage
Gain controlled wide-band Vision Intermediate Frequency (VIF) amplifier (AC-coupled)
Multistandard true synchronous demodulation with active carrier regeneration (very linear demodulation,
good intermodulation figures, reduced harmonics, excellent pulse response)
Gated phase detector for L/L accent standard
Fully integrated VIF Voltage Controlled Oscillator (VCO), alignment-free; frequencies switchable for all
negative and positive modulated standards via I2C-bus
Digital acquisition help, VIF frequencies of 33.4, 33.9, 38.0, 38.9, 45.75 and 58.75 MHz
4 MHz reference frequency input [signal from Phase-Locked Loop (PLL) tuning system] or operating as
crystal oscillator
VIF Automatic Gain Control (AGC) detector for gain control, operating as peak sync detector for negative
modulated signals and as a peak white detector for positive modulated signals
Precise fully digital Automatic Frequency Control (AFC) detector with 4-bit digital-to-analog converter; AFC
bits via I2C -bus readable
TakeOver Point (TOP) adjustable via I2C-bus or alternatively with potentiometer
Fully integrated sound carrier trap for 4.5, 5.5, 6.0 and 6.5 MHz, controlled by FM-PLL oscillator
Sound IF (SIF) input for single reference Quasi Split Sound (QSS) mode (PLL controlled)

21

AK - 45
CHASSIS

SIF AGC for gain controlled SIF amplifier; single reference QSS mixer able to operate in high performance
single reference QSS mode and in intercarrier mode, switchable via I2C-bus
AM demodulator without extra reference circuit
Alignment-free selective FM-PLL demodulator with high linearity and low noise
I2C-bus control for all functions
I2C-bus transceiver with pin programmable Module Address (MAD).

13.13.3.Pinning
SYMBOL
VIF1
VIF2
OP1
FMPLL
DEEM
AFD
DGND
AUD
TOP
SDA
SCL
SIOMA
n.c.
TAGC
REF
VAGC
CVBS
AGND
VPLL

VP
AFC
OP2
SIF1
SIF2

PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

DESCRIPTION
VIF differential input 1
VIF differential input 2
output 1 (open-collector)
FM-PLL for loop filter
de-emphasis output for capacitor
AF decoupling input for capacitor
digital ground
audio output
tuner AGC TakeOver Point (TOP)
I2C-bus data input/output
I2C-bus clock input
sound intercarrier output and MAD select
not connected
tuner AGC output
4 MHz crystal or reference input
VIF-AGC for capacitor; note 1
video output
analog ground
VIF-PLL for loop filter
supply voltage (+5 V)
AFC output
output 2 (open-collector)
SIF differential input 1
SIF differential input 2

13.14.PI5V330
13.14.1.General Description
The PI5V330 is well suited for video applications when switching composite or RGB analog.

22

AK - 45
CHASSIS

14.AK45 CHASSIS PRODUCTION SERVICE MODE ADJUSTMENTS
14.1.SERVICE MENU
All system, geometry and white balance alignments are performed in production service mode. Before
starting the production mode alignments, make sure that all manual adjustments are done correctly. To
start production mode alignments enter the MAIN MENU and then press the digits 4, 7, 2 and 5
respectively or press MUTE and INFO buttons at the same time. The following first menu appears on
the screen.
SERVICE
ADJUST...
OPTIONS...

AK45JA0XX
AK45JA0XX

You can select Adjust or Options items by pressing Up/Down buttons. Selected parameter will be
highlighted. In order to enter the selected parameter, press Left or Right button. To exit the service
menu press MENU button. Entire service menu parameters of AK45 CHASSIS are listed below.
14.2.ADJUST MENU
Select the parameter by pressing up/down buttons. Adjust the parameter by pressing Left/Right
buttons. In ADJUST menu, changed values are stored automatically.
ADJUST...
000
001
002
003
004
005
006
007
008
009

255
036
019
020
030
026
003
004
005
005

White Point Red, White Point Green, White Point Blue:
Not used.
AGC
Apply PAL BG signal, VHF-3 Channel-12 and 60dBµV signal level. Adjust AGC (Automatic Gain
Control) item by pressing Left/Right buttons till the voltage at AGC point (pin1 of the tuner) becomes 3.0
volts.
If PLL negative
Not used.
If PLL positive
Not used.
Y-Delay
Enter a PAL B/G colour and black-white bar test pattern via RF. Adjust Y-Delay for PAL till the colour
transients on the colour bar of the pattern become as sharper and colours between transients do not
mix with each other as possible.

23

AK - 45
CHASSIS

Y-Delay SECAM
Enter a SECAM B/G colour and black-white bar test pattern via RF. Adjust Y-Delay SECAM till the
colour transients on the colour bar of the pattern become as sharper and colours between transients do
not mix with each other as possible.
Y-Delay NTSC
Enter an NTSC colour and black-white bar test pattern via RF. Adjust Y-Delay NTSC till the colour
transients on the colour bar of the pattern become as sharper and colours between transients do not
mix with each other as possible.
Y-Delay other
Not used.
Vertical Position Offset
This value is fixed (127)
Vertical Position Offset
This value is fixed (127)
Horizontal Position Offset
This value is fixed (127)
Horizontal Position Offset
This value is fixed (127)
Vertical Blank Start
This register will be used only at 4:3 tubes for 16:9 mode adjustment. It adjusts the vertical blank start
position.
Vertical Blank Stop
This register will be used only at 4:3 tubes for 16:9 mode adjustment. It adjusts the vertical blank stop
position.
Angle
Change Angle by pressing Left/Right buttons till the vertical lines of the crosshatch pattern become
completely perpendicular to horizontal lines without any angle of vertical deviation. Check and readjust
ANGLE item if the adjustment becomes improper after some other geometric adjustments are done.
Bow
Change Bow by pressing Left/Right buttons till the vertical lines especially ones close to the left and
right sides will of equal and symmetrical bending, i.e. they together will neither be towards left side nor
right side. Check and readjust BOW item if the adjustment becomes improper after some other
geometric adjustments are done.
4:3 Horizontal Blank Start
This register will be used only at 16:9 tube for 4:3 mode adjustment. It adjusts the horizontal blank start
position.
4:3 Horizontal Blank Stop
This register will be used only at 16:9 tube for 4:3 mode adjustment. It adjusts the horizontal blank stop
position.
EHTV Compensation
It’s used to adjust the EHT compensation vertical gain coefficient.
EHTTM Compensation
It’s used to adjust the EHT compensation time constant.
EHTEW Compensation
It’s used to adjust the EHT compensation east/west gain coefficient.

24

AK - 45
CHASSIS

WDR
The amplitude of R of RGB output can be adjusted with the drive parameter WDR.
WDG
The amplitude of G of RGB output can be adjusted with the drive parameter WDG.
WDB
The amplitude of B of RGB output can be adjusted with the drive parameter WDB.
CR
The DC offset values of R of RGB output can be adjusted with the cutoff parameter CR.
CG
The DC offset values of G of RGB output can be adjusted with the cutoff parameter CG.
CB
The DC offset values of B of RGB output can be adjusted with the cutoff parameter CB.
COR coring level
The amplitude of the correction signal is adjustable. Small noise amplitudes in the correction signal are
suppressed by an adjustable coring circuit.
REGULAR VERT_POS (Regular mode Vertical Position)
Enter a PAL B/G circle test pattern via RF. Change Vertical Position till the test pattern is vertically
centered. Horizontal line at the center pattern is in equal distance both to upper and lower side of the
picture tube. Check and readjust Vertical Position item if the adjustment becomes improper after some
other geometric adjustments are done.
It’s used to adjust the vertical position of regular mode.
REGULAR VERT_AMPL (Regular mode Vertical Amplitude)
It’s used to adjust the vertical amplitude of regular mode.
REGULAR VERT_SCOR (Regular mode Vertical S-Correction)
It’s used to adjust the vertical s-correction of regular mode.
REGULAR VERT_SSYM(Regular mode Vertical S Symmetry)
It’s used to adjust the vertical s-symmetry of regular mode.
REGULAR TRAPEZE (Regular mode Trapeze)
Change Trapezium by pressing Left/Right buttons till vertical lines, especially lines at the sides of the
picture frame became parallel to the both sides of picture tube as close as possible. Check and readjust
TRPEZ item if the adjustment becomes improper after some other geometric adjustments are done.
It’s used to adjust the trapeze of regular mode.
REGULAR CUSHION (Regular mode Cushion)
It’s used to adjust the cushion of regular mode.
REGULAR HOR_COR_SYM (Regular mode Horizontal Corner Symmetry)
It’s used to adjust the horizontal corners symmetry of regular mode.
REGULAR HOR_CORNER (Regular mode Horizontal Corner)
It’s used to adjust the horizontal corners of regular mode.
REGULAR HORZ_POS (Regular mode Horizontal Position)
Enter a PAL B/G circle test pattern via RF. Change Horizontal Position until the picture is horizontally
centered. Check and readjust Horizontal Position item if the adjustment becomes improper after some
other geometric adjustments are done.
It’s used to adjust the horizontal position of regular mode.
REGULAR HORZ_AMPL (Regular mode Horizontal Amplitude)
It’s used to adjust the horizontal amplitude of regular mode.

25

AK - 45
CHASSIS

PANORAMIC VERT_POS (Panoramic mode Vertical Position)
It’s used to adjust the vertical position of panoramic mode.
PANORAMIC VERT_AMPL (Panoramic mode Vertical Amplitude)
It’s used to adjust the vertical amplitude of panoramic mode.
PANORAMIC VERT_SCOR (Panoramic mode Vertical S-Correction)
It’s used to adjust the vertical s-correction of panoramic mode.
PANORAMIC VERT_SSYM (Panoramic mode Vertical S-Symmetry)
It’s used to adjust the vertical s-symmetry of panoramic mode.
PANORAMIC TRAPEZE (Panoramic mode Trapeze)
It’s used to adjust the trapeze of panoramic mode.
PANORAMIC CUSHION (Panoramic mode Cushion)
It’s used to adjust the cushion of panoramic mode.
PANORAMIC HOR_COR_SYM (Panoramic mode Horizontal corner symmetry)
It’s used to adjust the horizontal corners symmetry of panoramic mode.
PANORAMIC HOR_CORNER (Panoramic mode Horizontal corner)
It’s used to adjust the horizontal corners of panoramic mode.
PANORAMIC HORZ_POS (Panoramic mode Horizontal position)
It’s used to adjust the horizontal position of panoramic mode.
PANORAMIC HORZ_AMPL (Panoramic mode Horizontal amplitude)
It’s used to adjust the horizontal amplitude of panoramic mode.
14:9 ZOOM VERT_POS (14:9 Zoom mode Vertical Position)
It’s used to adjust the vertical position of 14:9 zoom mode.
14:9 ZOOM VERT_AMPL (14:9 Zoom mode Vertical Amplitude)
It’s used to adjust the vertical amplitude of 14:9 zoom mode.
14:9 ZOOM VERT_SCOR (14:9 Zoom mode Vertical S-Correction)
It’s used to adjust the vertical s-correction of 14:9 zoom mode.
14:9 ZOOM VERT_SSYM (14:9 Zoom mode Vertical S-Symmetry)
It’s used to adjust the vertical s-symmetry of 14:9 zoom mode.
14:9 ZOOM TRAPEZE (14:9 Zoom mode Trapeze)
It’s used to adjust the trapeze of 14:9 zoom mode.
14:9 ZOOM CUSHION (14:9 Zoom mode Cushion)
It’s used to adjust the cushion of 14:9 zoom mode.
14:9 ZOOM HOR_COR_SYM (14:9 Zoom mode Corner Symmetry)
It’s used to adjust the horizontal corners symmetry of 14:9 zoom mode.
14:9 ZOOM HOR_CORNER (14:9 Zoom mode Horizontal Corner)
It’s used to adjust the horizontal corners of 14:9 zoom mode.
14:9 ZOOM HORZ_POS (14:9 Zoom mode Horizontal Position)
It’s used to adjust the horizontal position of 14:9 zoom mode.
14:9 ZOOM HORZ_AMPL (14:9 Zoom mode Horizontal Amplitude)
It’s used to adjust the horizontal amplitude of 14:9 zoom mode.

26

AK - 45
CHASSIS

16:9 ZOOM VERT_POS (16:9 Zoom mode Vertical Position)
It’s used to adjust the vertical position of 16:9 zoom mode.
16:9 ZOOM VERT_AMPL (16:9 Zoom mode Vertical Amplitude)
It’s used to adjust the vertical amplitude of 16:9 zoom mode.
16:9 ZOOM VERT_SCOR (16:9 Zoom mode Vertical S-Correction)
It’s used to adjust the vertical s-correction of 16:9 zoom mode.
16:9 ZOOM VERT_SSYM (16:9 Zoom mode Vertical S-Symmetry)
It’s used to adjust the vertical s-symmetry of 16:9 zoom mode.
16:9 ZOOM TRAPEZE (16:9 Zoom mode Trapeze)
It’s used to adjust the trapeze of 16:9 zoom mode.
16:9 ZOOM CUSHION (16:9 Zoom mode Cushion)
It’s used to adjust the cushion of 16:9 zoom mode.
16:9 ZOOM HOR_COR_SYM (16:9 Zoom mode Horizontal corner symmetry)
It’s used to adjust the horizontal corners symmetry of 16:9 zoom mode.
16:9 ZOOM HOR_CORNER (16:9 Zoom mode Horizontal corner)
It’s used to adjust the horizontal corners of 16:9 zoom mode.
16:9 ZOOM HORZ_POS (16:9 Zoom mode Horizontal position)
It’s used to adjust the horizontal position of 16:9 zoom mode.
16:9 ZOOM HORZ_AMPL (16:9 Zoom mode Horizontal amplitude)
It’s used to adjust the horizontal amplitude of 16:9 zoom mode.
16:9 ZOOM SUBTITLE VERT_POS (16:9 Zoom Subtitle mode Vertical position)
It’s used to adjust the vertical position of 16:9 zoom subtitle mode.
16:9 ZOOM SUBTITLE VERT_AMPL (16:9 Zoom Subtitle mode Vertical amplitude)
It’s used to adjust the vertical amplitude of 16:9 zoom subtitle mode.
16:9 ZOOM SUBTITLE VERT_SCOR (16:9 Zoom Subtitle mode Vertical S-Correction)
It’s used to adjust the vertical s-correction of 16:9 zoom subtitle mode.
16:9 ZOOM SUBTITLE VERT_SSYM (16:9 Zoom Subtitle mode Vertical S-Symmetry)
It’s used to adjust the vertical s-symmetry of 16:9 zoom subtitle mode.
16:9 ZOOM SUBTITLE TRAPEZE (16:9 Zoom Subtitle mode Trapeze)
It’s used to adjust the trapeze of 16:9 zoom subtitle mode.
16:9 ZOOM SUBTITLE CUSHION (16:9 Zoom Subtitle mode Cushion)
It’s used to adjust the cushion of 16:9 zoom subtitle mode.
16:9 ZOOM SUBTITLE HOR_COR_SYM (16:9 Zoom Subtitle mode Horizontal Corner Symmetry)
It’s used to adjust the horizontal corners symmetry of 16:9 zoom subtitle mode.
16:9 ZOOM SUBTITLE HOR_CORNER (16:9 Zoom Subtitle mode Horizontal corner)
It’s used to adjust the horizontal corners of 16:9 zoom subtitle mode.
16:9 ZOOM SUBTITLE HORZ_POS (16:9 Zoom Subtitle mode Horizontal position)
It’s used to adjust the horizontal position of 16:9 zoom subtitle mode.
16:9 ZOOM SUBTITLE HORZ_AMPL (16:9 Zoom Subtitle mode Horizontal amplitude)
It’s used to adjust the horizontal amplitude of 16:9 zoom subtitle mode.

27

AK - 45
CHASSIS

OSD Position
It’s used to adjust the horizontal position of the OSD.
BCLTHR
Beam current threshold
BCLG
Beam current loop gain
ROTATION (TILT)
This adjustment only works when the TV has rotation option. Change TILT by pressing Left/Right
buttons to rotate the complete raster clock-wise and counter clock-wise depending on the CRT. Check
and readjust TRPEZ item if the adjustment becomes improper after some other geometric adjustments
are done.
LSLSA, LSLSB, LSL2, LSLTA, LSLTB (Luma soft limiter)
LSLSA: Luma soft limiter slope A (fixed)
LSLSB: Luma soft limiter slope B (fixed)
LSL2: Luma soft limiter absolute limit (fixed)
LSLTA: Luma soft limiter segment A tilt point (fixed)
LSLTB: Luma soft limiter segment A tilt point (fixed)
REFERENCE WDR RED (NORMAL)
The amplitude of R of RGB output can be adjusted with the drive parameter WDR for the colour
temperature of normal mode.
REFERENCE WDR GREEN (NORMAL)
The amplitude of G of RGB output can be adjusted with the drive parameter WDR for the colour
temperature of normal mode.
REFERENCE WDR BLUE (NORMAL)
The amplitude of B of RGB output can be adjusted with the drive parameter WDR for the colour
temperature of normal mode.
REFERENCE CUTOFF RED
It’s fixed.
REFERENCE CUTOFF GREEN
It’s fixed.
REFERENCE CUTOFF BLUE
It’s fixed.
IBRM
Internal Brightness, the brightness for measurement can be set to measure at higher cutoff current. The
measurement brightness is independent of the drive values. It’s used to adjust the maximum brightness
level.
WDRV
White drive measurement control. It is used to adjust the maximum contrast level.
ACC_SAT (COLOUR OFFSET)
It’s used to adjust the max. colour level.
G2 CUTOFF REFERENCE
It’s fixed.
G2 WDR REFERENCE
It’s fixed.

28

AK - 45
CHASSIS

POFS2 (RGB HORIZONTAL SHIFT)
It’s used to adjust the horizontal position of RGB signal.
REFERENCE WDR RED COOL
The amplitude of R of RGB output can be adjusted with the drive parameter WDR for the colour temp of
cool mode.
REFERENCE WDR GREEN COOL
The amplitude of G of RGB output can be adjusted with the drive parameter WDR for the colour temp
of cool mode.
REFERENCE WDR BLUE COOL
The amplitude of B of RGB output can be adjusted with the drive parameter WDR for the colour temp of
cool mode.
REFERENCE WDR RED WARM
The amplitude of R of RGB output can be adjusted with the drive parameter WDR for the colour temp of
warm mode.
REFERENCE WDR GREEN WARM
The amplitude of G of RGB output can be adjusted with the drive parameter WDR for the colour temp
of cool mode.
REFERENCE WDR BLUE WARM
The amplitude of B of RGB output can be adjusted with the drive parameter WDR for the colour temp of
cool mode.
STANDARD MODE BRIGHTNESS
It’s used to adjust the brightness value of standard mode.
STANDARD MODE COLOUR
It’s used to adjust the colour value of standard mode.
STANDARD MODE CONTRAST
It’s used to adjust the contrast value of standard mode.
FULL VERT_POS (16:9 MODE)
It’s used to adjust the vertical position of 16:9 mode (full mode).
FULL VERT_AMPL
It’s used to adjust the vertical amplitude of 16:9 mode (full mode).
FULL VERT_SCOR
It’s used to adjust the vertical s-correction of 16:9 mode (full mode).
FULL VERT_SSYM
It’s used to adjust the vertical s-symmetry of 16:9 mode (full mode).
FULL TRAPEZE
It’s used to adjust the trapeze of 16:9 mode (full mode).
FULL CUSHION
It’s used to adjust the cushion of 16:9 mode (full mode).
FULL HOR_COR_SYM
It’s used to adjust the horizontal corners symmetry of 16:9 mode (full mode).
FULL HOR_CORNER
It’s used to adjust the horizontal corners of 16:9 mode (full mode).

29

AK - 45
CHASSIS

FULL HORZ_POS
It’s used to adjust the horizontal position of 16:9 mode (full mode).
FULL HORZ_AMPL
It’s used to adjust the horizontal amplitude of 16:9 mode (full mode).
BRIGHT MODE BRIGHTNESS
It’s used to adjust the brightness value of bright mode.
BRIGHT MODE COLOUR
It’s used to adjust the colour value of bright mode.
BRIGHT MODE CONTRAST
It’s used to adjust the contrast value of bright mode.
SOFT MODE BRIGHTNESS
It’s used to adjust the brightness value of soft mode.
SOFT MODE COLOUR
It’s used to adjust the colour value of soft mode.
SOFT MODE CONTRAST
It’s used to adjust the contrast value of soft mode.
PERSONAL MODE FACTORY SETTING BRIGHTNESS
It’s fixed.
PERSONAL MODE FACTORY SETTING COLOUR
It’s fixed.
PERSONAL MODE FACTORY SETTING CONTRAST
It’s fixed.
SCINC FOR PANORAMIC MODE
scaler1 coefficient, this scaler is compressing the signal.
SCINC1 FOR PANORAMIC MODE
scaler2 coefficient, this scaler is expanding the signal.
VOLUME AFTER APS
It’s used to adjust the volume level after APS.
VERTICAL SCROLL
It’s used to adjust the step width for scroll function.
14:9 HORIZONTAL START
It’s used to adjust the horizontal blank start position for 14:9 mode.
14:9 HORIZONTAL STOP
It’s used to adjust the horizontal blank stop position for 14:9 mode.
4:3 RGB HORIZONTAL AMPLITUDE
It’s used to adjust the horizontal amplitude in 4:3 mode for RGB signals.
4:3 RGB CUSHION
It’s used to adjust the cushion in 4:3 mode for RGB signals.
14:9 RGB HORIZONTAL AMPLITUDE
It’s used to adjust the horizontal amplitude in 14:9 mode for RGB signals.

30

AK - 45
CHASSIS

14:9 RGB CUSHION
It’s used to adjust the cushion in 14:9 mode for RGB signals.
PANORAMIC RGB HORIZONTAL AMPLITUDE
It’s used to adjust the horizontal amplitude in panoramic mode for RGB signals.
16:9 RGB HORIZONTAL AMPLITUDE
It’s used to adjust the horizontal amplitude in 16:9 mode for RGB signals.
16:9 SUBTITLE RGB HORIZONTAL AMPLITUDE
It’s used to adjust the horizontal amplitude in 16:9 subtitle mode for RGB signals.
FULL RGB HORIZONTAL AMPLITUDE
It’s used to adjust the horizontal amplitude in full mode for RGB signals.
TELETEXT HORZ_POS
It’s used to adjust the horizontal position of teletext signal.

31

AK - 45
CHASSIS

SHARP 11AK45 TVs ADJUST VALUES
SETTING VALUES
ADJUST
N0
ADJUST 0
ADJUST 1
ADJUST 2
ADJUST 3
ADJUST 4
ADJUST 5
ADJUST 6
ADJUST 7
ADJUST 8
ADJUST 9
ADJUST 10
ADJUST 11
ADJUST 12
ADJUST 13

ADJUST 14

ADJUST 15
ADJUST 16
ADJUST 17

ADJUST 18

ADJUST 19
ADJUST 20
ADJUST 21
ADJUST 22
ADJUST 23
ADJUST 24
ADJUST 25
ADJUST 26
ADJUST 27
ADJUST 28
ADJUST 29
ADJUST 30
ADJUST 31
ADJUST 32
ADJUST 33
ADJUST 34
ADJUST 35
ADJUST 36
ADJUST 37
ADJUST 38
ADJUST 39
ADJUST 40
ADJUST 41
ADJUST 42
ADJUST 43
ADJUST 44
ADJUST 45
ADJUST 46
ADJUST 47
ADJUST 48
ADJUST 49
ADJUST 50
ADJUST 51
ADJUST 52
ADJUST 53
ADJUST 54
ADJUST 55
ADJUST 56
ADJUST 57
ADJUST 58

THOMSON
28'' 16:9 SF TV
W66EJU023X215

EXPLANATION
Not used
Not used
Not used
AGC (Autamatic Gain Control)
Not used
Not used
Y-Delay
Y-Delay SECAM
Y-Delay NTSC
Y-Delay OTHER
Vertical Position Offset
Vertical Amplitude Offset
Horizontal Position Offset
Horizontal Amplitude Offset
Vertical Blank Start
(It will be used only at 4.3 tube for 16:9 mode
adjustment)
Vertical Blank Stop
(It will be used only at 4.3 tube for 16:9 mode
adjustment)
Angle
Bow
Horz. Blank Start
(It will be used only at 16:9 tube for 4:3 and
14:9 mode adjustments)
Horz. Blank Stop
(It will be used only at 16:9 tube for 4:3 and
14:9 mode adjustments)
EHTV compensation
EHTTM compensation
EHTEW compensation
WDR
WDG
WDB
CR
CG
CB
COR coring level
NORMAL VERT_POS
NORMAL VERT_AMPL
NORMAL VERT_SCOR
NORMAL VERT_SSYM
NORMAL TRAPEZE
NORMAL CUSHION
NORMAL HOR_COR_SYM
NORMAL HOR_CORNER
NORMAL HORZ_POS
NORMAL HORZ_AMPL
PANORAMIC VERT_POS
PANORAMIC VERT_AMPL
PANORAMIC VERT_SCOR
PANORAMIC VERT_SSYM
PANORAMIC TRAPEZE
PANORAMIC CUSHION
PANORAMIC HOR_COR_SYM
PANORAMIC HOR_CORNER
PANORAMIC HORZ_POS
PANORAMIC HORZ_AMPL
ZOOM 14:9 VERT_POS
ZOOM 14:9 VERT_AMPL
ZOOM 14:9 VERT_SCOR
ZOOM 14:9VERT_SSYM
ZOOM 14:9 TRAPEZE
ZOOM 14:9 CUSHION
ZOOM 14:9 HOR_COR_SYM
ZOOM 14:9 HOR_CORNER
ZOOM 14:9 HORZ_POS

32

THOMSON
28" 4:3 SF
A66EHJ13X01

THOMSON
32" 16:9 SF
W7EGV023X215

255
255
255
36
36
36
19
19
19
It will be adjusted to below 1V of max. AGC for each TV
30
30
30
26
26
26
2
2
2
3
3
3
5
5
5
5
5
5
127
127
127
127
127
127
127
127
127
127
127
127

No use

150

119

No use
129
131

12
124
127

34
139
127

19

No use

19

201
66
2
160

15
127
53
129
136
129
149
128
113
50
98
127
52
134
139
129
150
134
113
48
36
128
41
134
140
128
156
145
113
49

No use
201
55
2
219
VDP ADJUSTS ITSELF
VDP ADJUSTS ITSELF
VDP ADJUSTS ITSELF
VDP ADJUSTS ITSELF
VDP ADJUSTS ITSELF
VDP ADJUSTS ITSELF
128
81
132
136
129
155
123
107
54
16

66
5
160

127
53
133
131
131
141
118
137
45
107
127
48
133
131
131
146
121
134
48
44
125
42
133
131
131
148
123
135
47

AK - 45
CHASSIS

SHARP 11AK45 TVs ADJUST VALUES
SETTING VALUES
ADJUST
N0
ADJUST 59
ADJUST 60
ADJUST 61
ADJUST 62
ADJUST 63
ADJUST 64
ADJUST 65
ADJUST 66
ADJUST 67
ADJUST 68
ADJUST 69
ADJUST 70
ADJUST 71
ADJUST 72
ADJUST 73
ADJUST 74
ADJUST 75
ADJUST 76
ADJUST 77
ADJUST 78
ADJUST 79
ADJUST 80
ADJUST 81
ADJUST 82
ADJUST 83
ADJUST 84
ADJUST 85
ADJUST 86
ADJUST 87
ADJUST 88
ADJUST 89
ADJUST 90
ADJUST 91
ADJUST 92
ADJUST 93
ADJUST 94
ADJUST 95
ADJUST 96
ADJUST 97
ADJUST 98
ADJUST 99
ADJUST 100
ADJUST 101
ADJUST 102
ADJUST 103
ADJUST 104
ADJUST 105
ADJUST 106
ADJUST 107
ADJUST 108
ADJUST 109
ADJUST 110
ADJUST 111
ADJUST 112
ADJUST 113
ADJUST 114
ADJUST 115
ADJUST 116
ADJUST 117
ADJUST 118
ADJUST 119
ADJUST 120
ADJUST 121
ADJUST 122
ADJUST 123
ADJUST 124
ADJUST 125

EXPLANATION

THOMSON
28'' 16:9 SF TV
W66EJU023X215

ZOOM 14:9 HORZ_AMPL
CINEMA VERT_POS
CINEMA VERT_AMPL
CINEMA VERT_SCOR
CINEMA VERT_SSYM
CINEMA TRAPEZE
CINEMA CUSHION
CINEMA HOR_COR_SYM
CINEMA HOR_CORNER
CINEMA HORZ_POS
CINEMA HORZ_AMPL
16:9 ZOOM SUBTITLE VERT_POS
16:9 ZOOM SUBTITLE VERT_AMPL
16:9 ZOOM SUBTITLE VERT_SCOR
16:9 ZOOM SUBTITLE VERT_SSYM
16:9 ZOOM SUBTITLE TRAPEZE
16:9 ZOOM SUBTITLE CUSHION
16:9 ZOOM SUBTITLE HOR_COR_SYM
16:9 ZOOM SUBTITLE HOR_CORNER
16:9 ZOOM SUBTITLE HORZ_POS
16:9 ZOOM SUBTITLE HORZ_AMPL
OSD Position
BCLTHR beam current threshold
BCLG beam current loop gain
ROTATION (TILT)
LSLSA luma soft limiter
LSLSB
LSL2
LSLTA
LSLTB
REFERENCE WDR RED (NORMAL)
REFERENCE WDR GREEN (NORMAL)
REFERENCE WDR BLUE
(NORMAL)
REFERENCE CUTOFF RED
REFERENCE CUTOFF GREEN
REFERENCE CUTOFF BLUE
IBRM
WDRV
ACC_SAT (COLOR OFFSET)
G2 CUTOFF REFERENCE
G2 WDR REFERENCE
ADJUST POFS2 (RGB HORIZONTAL SHIFT)
REFERENCE WDR RED COOL
REFERENCE WDR GREEN COOL
REFERENCE WDR BLUE COOL
REFERENCE WDR RED WARM
REFERENCE WDR GREEN WARM
REFERENCE WDR BLUE WARM
STANDARD MODE BRIGHTNESS
STANDARD MODE COLOR
STANDARD MODE CONTRAST
FULL VERT_POS
FULL VERT_AMPL
FULL VERT_SCOR
FULL VERT_SSYM
FULL TRAPEZE
FULL CUSHION
FULL HOR_COR_SYM
FULL HOR_CORNER
FULL HORZ_POS
FULL HORZ_AMPL
BRIGHT MODE BRIGHTNESS
BRIGHT MODE COLOR
BRIGHT MODE CONTRAST
SOFT MODE BRIGHTNESS
SOFT MODE COLOR
SOFT MODE CONTRAST

59
128
28
129
146
128
164
135
117
48
36
147
33
123
156
121
162
125
114
48
36
205
30
6
2
2
0
255
0
1
X
X
X
55
69
69
215
68
130
220
90
60
X
X
X
X
X
X
32
47
32
128
51
132
139
128
151
134
49
35
30
43
50
32
43
58
20

33

THOMSON
28" 4:3 SF
A66EHJ13X01

THOMSON
32" 16:9 SF
W7EGV023X215

217
39
7
2
2
0
255
0
1
X
X
X
65
68
77
200
75
154
200
90
50
X
X
X
X
X
X
32
47
32
126
94
132
131
129
143
129
114
54
16
43
50
32
43
58
20

63
127
32
126
131
130
154
128
131
48
44
145
39
133
129
122
152
128
125
44
43
205
74
7
2
2
0
255
0
0
X
X
X
55
69
69
215
68
130
220
90
60
X
X
X
X
X
X
32
47
32
126
53
133
131
129
144
128
135
46
46
43
50
32
43
58
20

AK - 45
CHASSIS

SHARP 11AK45 TVs ADJUST VALUES
SETTING VALUES
ADJUST
N0

ADJUST 126
ADJUST 127
ADJUST 128
ADJUST 129
ADJUST 130
ADJUST 131
ADJUST 132

ADJUST 133

ADJUST 134
ADJUST 135
ADJUST 136
ADJUST 137
ADJUST 138
ADJUST 139
ADJUST 140
ADJUST 141
ADJUST 142
ADJUST 143
ADJUST 144
ADJUST 145
ADJUST 146
ADJUST 147
ADJUST 148
ADJUST 149
ADJUST 150
ADJUST 151
ADJUST 152

ADJUST 153

ADJUST 154

ADJUST 155

ADJUST 156
ADJUST 157
ADJUST 158

EXPLANATION
PERSONAL MODE FACTORY
SETTING BRIGHTNESS
PERSONAL MODE FACTORY
SETTING COLOR
PERSONAL MODE FACTORY
SETTING CONTRAST
SCINC FOR PANORAMIC MODE
SCINC1 FOR PANORAMIC MODE
VOLUME AFTER APS
VERTICAL SCROLL
14:9 HORIZONTAL START
(It will be used only at 4.3 tube for 16:9 mode
adjustment)
14:9 HORIZONTAL STOP
(It will be used only at 4.3 tube for 16:9 mode
adjustment)
NORMAL RGB HORIZONTAL AMPLITUDE
NORMAL RGB CUSHION
14:9 RGB HORIZONTAL AMPLITUDE
14:9 RGB CUSHION
PANORAMIC RGB
HORIZONTAL AMPLITUDE
CINEMA RGB
HORIZONTAL AMPLITUDE
ZOOM 16:9 SUBTITLE RGB
HORIZONTAL AMPLITUDE
FULL RGB HORIZONTAL AMPLITUDE
TELETEXT HORZ_POS
RGB BRIGHTNESS OFFSET
RGB CONTRAST OFFSET
TELETEXT BRIGHTNESS
TELETEXT CONTRAST
SVG1
SVD1
SVLIM
SVDEL
SVCOR
RASTER Horz. Blank Start
(It will be used only at 16:9 tube for 4:3 and
14:9 mode adjustments)
RASTER Horz. Blank Stop
(It will be used only at 16:9 tube for 4:3 and
14:9 mode adjustments)
RASTER RGB Horz. Blank Start
(It will be used only at 16:9 tube for 4:3 and
14:9 mode adjustments)
RASTER RGB Horz. Blank Stop
(It will be used only at 16:9 tube for 4:3 and
14:9 mode adjustments)
PøP BRIGHTNESS
PøP CONTRAST

THOMSON
28'' 16:9 SF TV
W66EJU023X215

THOMSON
28" 4:3 SF
A66EHJ13X01

THOMSON
32" 16:9 SF
W7EGV023X215

32

32

32

47

47

47

32
56
125
5
11

32
56
125

32
56
125

11

11

19

No use

19

201
99
151
70
156

No use
19
159
No use
No use

201
98
142
71
149

40

No use

49

40

No use

48

40
40
95
0
0
100
120
3
7
127
4
0

No use
18
104
80
75
150
135
3
7
127
4
0

48
48
98
0
0
100
120
3
7
127
4
0

117

No use

115

178

No use

176

116

No use

116

177
5
15

No use
5
15

176
5
15

X: WILL BE ADJUSTED AUTOMATICALLY ACCORDING TO THE SHARP SPECIFICATION.
COLOR TEMPERATURE SHOULD BE (SHARP SPECIFICATION);
WESTERN EUROPE EASTERN EUROPE
FOR NORMAL (x, y)
(290, 300)
(304, 306)
FOR COOL (x, y)
(274, 273)
(288, 269)
FOR WARM (x, y)
(310, 294)
(324, 300)

34

UK
(290, 284)
(274, 257)
(310, 278)

AK - 45
CHASSIS

14.3.OPTIONS MENU
Select the parameter by pressing up/down buttons. Adjust the parameter by pressing Left/Right
buttons. . In OPTIONS menu, some of the changed parameters are not stored automatically. To store
the adjusted parameters, you should turn off and on TV.
OPTIONS...
000
001
002
003
004
005
006
007
008
009

02
00
22
08
00
10
00
56
39
0F

00000010
00000000
00100010
00001000
00000000
00010000
00000000
01010110
00111001
00001111

Option 0. Video Processor Crystal Indication
B7: x
=
x
B6: x
=
x
B5: x
=
x
B4: x
=
x
B3: x
=
x
B2: x
=
x
B1: Xa =
note1 (Crystal indication)
B0: Xb =
note1 (Crystal indication)
note 1:
Xa,Xb
0,1 : Pal M, Pal N, NTSC M
Pin 34 : 3.58 (1, 2 or 3 crystals)
Pin 35 : No crystal
1,0

: Pal BG, Pal DK, Pal I/I+, Secam BG, Secam DK, Secam L/L’, Secam K1
Pin 34 : No crystal
Pin 35 : 4.43 (1 crystal)

1,1

: Pal BG, Pal DK, Pal I/I+, Secam BG, Secam DK, Secam L/L’, Secam K1, Pal M, Pal N, Ntsc M
Pin 34 : 3.58 (1, 2 or 3 crystals)
Pin 35 : 4.43 (1 crystal)

Option 1. (0x01) Video Processor Decoder Mode Register
B7:
B6:
B5:
B4:
B3:
B2:
B1:
B0:

x
x
x
x
x
x
x
x

=
=
=
=
=
=
=
=

x
x
x
x
x
x
x
x

Option 2. (0x18) Video Processor Blanking Control
B7: SWF
B6: Vsd
B5: x

=
=
=

1 (Subwoofer item at menu)
0 (Vertical scan disable)
x

35

AK - 45
CHASSIS

B4:
B3:
B2:
B1:
B0:

x
x
x
LUMA
BB

=
=
=
=
=

x
x
x
1 Luma Soft Limiter Enabled
1 Blue Background Option

Option 3. (0x19) Video Processor Cathode Drive Level
B7: x
=
x
B6: x
=
x
B5: x
=
x
B4: x
=
x
B3: x
=
x
B2: x
=
x
B1: x
=
x
B0: country =
note 0
Note 0: choice for others country option
1
:
BG
0
:
DK
Option 4.
B7: x
=
B6: x
=
B5: x
=
B4: x
=
B3: x
=
B2: x
=
B1: x
=
B0: x
=

x
x
x
x
x
x
x
x

Option 5. CTI Available, Mono AVL
B7: x
=
x
B6: x
=
x
B5: x
=
x
B4: x
=
x
B3: x
=
x
B2: x
=
x
B1: x
=
x
B0: x
=
x
Option 6.
B7:
=
B6:
=
B5:
=
B4: x
=
B3: x
=
B2: x
=
B1: x
=
B0: x
=

TEXT LANGUAGE 3
TEXT LANGUAGE 2
TEXT LANGUAGE 1
x
x
x
x
x

Option 7. OPTIONHOTELACTIVE, PLL_VST, PIP Zoom Mode, PIP Position
B7: x
=
x
B6: x
=
x
B5: F
=
note 1
B4: x
=
x
B3: x
=
x
B2: PZM =
x
B1: AV2 =
1 AV2 Output enabled
B0: x
=
x

36

AK - 45
CHASSIS

Note 1:
F
:Frequency Mode
1: =
Frequency Menu Item available
0: =
Frequency Menu Item not available
Option 8. IF Frequency
B7: x
=
x
B6: x
=
x
B5: IfI
=
0
B4: IfD
=
0
B3: IfM
=
note 5
B2: Aps
=
note 6
B1: Hp
=
note 7
B0: Hue
=
note 8

note 3
note 4

Note 3:
IfI
1
=
IF I 39.5 MHz
0
=
IF I 38.9 MHz

Great Britain I , Only UHF Tuner
Ireland I+ ,
Standard Tuner

Note 4:
IfD
1
=
IF DK 38.0 MHz
0
=
IF DK 38.9 MHz
Note 5:
IfM
1
=
IF M,N 45.75 MHz S&N American Models , Tuner UV1336
0
=
IF M,N 38.9 MHz Euro M,N Models
, Standard Tuner
Note 6:
Aps ( Only for PLL )
0
=
A.P.S. done
1
=
A.P.S. set
Note 7:
Hp :
Headphone available
0
=
No headphone
1
=
Headphone available
Note 8:
Hue :
Hue Available
0
=
No Hue
1
=
Hue available
Option 9. Standard Available
B7: NM =
note 1
B6: PN =
note 1
B5: PM =
note 1
B4: K1 =
note 1
B3: L
=
note 1
B2: I
=
note 1
B1: DK =
note 1
B0: BG =
note 1
Note 1:
0
=
Standard not supported
1
=
Standard available

37

(Only Pal M/N, Ntsc M)

AK - 45
CHASSIS

Option 10. Scart, Combfilter, Teletext, Language
B7: x
=
x
B6: RGB
=
note 2
B5: FAV =
B4: AV2S
=
B3: FSVHS =
note 3
B2: BAV
=
note 4
B1: Sc2
=
note 5
B0: BSVHS =
note 6
Note 2 :
RGB
=

RGB Menu Item active/inactive

0
1

RGB Menu Item inactive
RGB Menu Item active

=
=

Note 3:
0
=
Front S-VHS not supported
1
=
Front S-VHS available
Note 4:
0
=
Back AV (AV-3) not supported
1
=
Back AV (AV-3) available
Note 5:
0
=
Scart 2 not supported
1
=
Scart 2 available
Note 6:
0
=
Back SVHS not supported
1
=
Back SVHS available
Option 11. PLL Tuner Control 1 Byte
Pll tuner control 1 byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316T MK3
1 0 0 0 1 1 1 0
Philips
UV1316MK2
1 0 0 0 1 1 1 0
Alps
TELE9X062A
1 0 0 0 1 1 1 0
Samsung
TEXX2949PG28A 1 0 0 0 1 1 1 0
Siel
PT060
1 0 0 0 1 1 1 0
Temic
5001PH5-3X0003 1 0 0 0 1 1 1 0
Thomson
CTT5020
1 0 0 0 1 1 1 0
Option 12. PLL Tuner Control 2 Low Byte
Pll tuner control 2 low byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316T MK3
0 0 0 0 0 0 0 1
Philips
UV1316MK2
1 0 1 0 0 0 0 1
Alps
TELE9X062A
0 0 0 0 0 0 0 1
Samsung
TEXX2949PG28A 0 0 0 0 0 0 0 1
Siel
PT060
0 1 1 0 0 0 0 0
Temic
5001PH5-3X0003 0 0 0 0 0 0 1 0
Thomson
CTT5020
0 0 0 0 0 0 1 1

38

AK - 45
CHASSIS

Option 13. PLL Tuner Control 2 Mid Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316T MK3
0 0 0 0 0 0 1 0
Philips
UV1316MK2
1 0 0 1 0 0 1 0
Alps
TELE9X062A
0 0 0 0 0 0 1 0
Samsung
TEXX2949PG28A 0 0 0 0 0 0 1 0
Siel
PT060
1 1 0 1 0 0 0 0
Temic
5001PH5-3X0003 0 0 0 0 0 1 0 0
Thomson
CTT5020
0 0 0 0 0 1 1 0
Option 14. PLL Tuner Control 2 High Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316T MK3
0 0 0 0 0 1 0 0
Philips
UV1316MK2
0 0 1 1 0 1 0 0
Alps
TELE9X062A
0 0 0 0 1 0 0 0
Samsung
TEXX2949PG28A 0 0 0 0 1 0 0 0
Siel
PT060
0 0 1 1 0 0 0 0
Temic
5001PH5-3X0003 0 0 0 0 0 0 0 1
Thomson
CTT5020
1 0 0 0 0 1 0 1
Option 15. PLL Tuner VHF LOW – VHF HIGH Crossover Low Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316T MK3
0 0 1 0 0 0 0 0
Philips
UV1316MK2
0 0 0 0 1 0 1 0
(0A hex)
Alps
TELE9X062A
0 0 0 0 0 0 0 0
Samsung
TEXX2949PG28A 0 0 0 0 1 0 0 0
Siel
PT060
0 0 0 0 1 0 1 0
Temic
5001PH5-3X0003 0 0 0 0 0 0 0 0
Thomson
CTT5020
1 0 1 0 1 0 1 0
(AA hex)
Option 16. PLL Tuner VHF LOW – VHF HIGH Crossover High Byte
Pll tuner VHF LOW - VHF HIGH crossover high byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316T MK3
0 0 0 0 1 1 0 0
Philips
UV1316MK2
0 0 0 0 1 1 0 0
(0C hex)
Alps
TELE9X062A
0 0 0 0 0 0 0 0
Samsung
TEXX2949PG28A 0 0 0 0 1 1 0 1
Siel
PT060
0 0 0 0 1 1 0 1
Temic
5001PH5-3X0003 0 0 0 0 0 0 0 0
Thomson
CTT5020
0 0 0 0 1 0 0 1
(09 hex)
Option 17. PLL Tuner VHF HIGH – UHF Crossover Low Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316T MK3
0 0 0 0 0 0 1 0
Philips
UV1316MK2
1 1 1 0 0 0 1 0
(E2 hex)
Alps
TELE9X062A
0 0 0 0 0 0 0 0
Samsung
TEXX2949PG28A 1 0 1 0 0 0 1 0
Siel
PT060
1 0 1 0 0 1 0 0
Temic
5001PH5-3X0003 0 0 0 0 0 0 0 0
Thomson
CTT5020
1 0 1 0 0 0 1 0
(A2 hex)
Option 18. PLL Tuner VHF HIGH – UHF Crossover High Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316T MK3
0 0 0 1 1 1 1 0
Philips
UV1316MK2
0 0 0 1 1 1 1 0
(1D hex)
Alps
TELE9X062A
0 0 0 0 0 0 0 0
Samsung
TEXX2949PG28A 0 0 0 1 1 1 1 0
Siel
PT060
0 0 0 1 1 1 1 0

39

AK - 45
CHASSIS

Temic
Thomson

5001PH5-3X0003 0 0 0 0 0 0 0 0
CTT5020
0 0 0 1 1 0 1 1

(1B hex)

Option 19. PIP PLL Tuner Control 1 Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316MK2
1 0 0 0 1 1 1 0
Alps
TELE9X062A
1 0 0 0 1 1 1 0
Samsung
TEXX2949PG28A 1 0 0 0 1 1 1 0
Siel
PT060
1 0 0 0 1 1 1 0
Temic
5001PH5-3X0003 1 0 0 0 1 1 1 0
Thomson
CTT5020
1 0 0 0 1 1 1 0
Option 20. PIP PLL Tuner Control 2 Low Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316MK2
1 0 1 0 0 0 0 1
Alps
TELE9X062A
0 0 0 0 0 0 0 1
Samsung
TEXX2949PG28A 0 0 0 0 0 0 0 1
Siel
PT060
0 1 1 0 0 0 0 0
Temic
5001PH5-3X0003 0 0 0 0 0 0 1 0
Thomson
CTT5020
0 0 0 0 0 0 1 1
Option 21. PIP PLL Tuner Control 2 Mid Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316MK2
1 0 0 1 0 0 1 0
Alps
TELE9X062A
0 0 0 0 0 0 1 0
Samsung
TEXX2949PG28A 0 0 0 0 0 0 1 0
Siel
PT060
1 1 0 1 0 0 0 0
Temic
5001PH5-3X0003 0 0 0 0 0 1 0 0
Thomson
CTT5020
0 0 0 0 0 1 1 0
Option 22. PIP PLL Tuner Control 2 High Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316MK2
0 0 1 1 0 1 0 0
Alps
TELE9X062A
0 0 0 0 1 0 0 0
Samsung
TEXX2949PG28A 0 0 0 0 1 0 0 0
Siel
PT060
0 0 1 1 0 0 0 0
Temic
5001PH5-3X0003 0 0 0 0 0 0 0 1
Thomson
CTT5020
1 0 0 0 0 1 0 1
Option 23. PIP PLL Tuner VHF LOW – VHF HIGH Crossover Low Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316MK2
0 0 0 0 1 0 1 0
(0A hex)
Alps
TELE9X062A
0 0 0 0 0 0 0 0
Samsung
TEXX2949PG28A 0 0 0 0 1 0 0 0
Siel
PT060
0 0 0 0 1 0 1 0
Temic
5001PH5-3X0003 0 0 0 0 0 0 0 0
Thomson
CTT5020
1 0 1 0 1 0 1 0
(AA hex)
Option 24. PIP PLL Tuner VHF LOW – VHF HIGH Crossover High Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316MK2
0 0 0 0 1 1 0 0
(0C hex)
Alps
TELE9X062A
0 0 0 0 0 0 0 0
Samsung
TEXX2949PG28A 0 0 0 0 1 1 0 1
Siel
PT060
0 0 0 0 1 1 0 1
Temic
5001PH5-3X0003 0 0 0 0 0 0 0 0
Thomson
CTT5020
0 0 0 0 1 0 0 1
(09 hex)

40

AK - 45
CHASSIS

Option 25. PIP PLL Tuner VHF HIGH – UHF Crossover Low Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316MK2
1 1 1 0 0 0 1 0
(E2 hex)
Alps
TELE9X062A
0 0 0 0 0 0 0 0
Samsung
TEXX2949PG28A 1 0 1 0 0 0 1 0
Siel
PT060
1 0 1 0 0 1 0 0
Temic
5001PH5-3X0003 0 0 0 0 0 0 0 0
Thomson
CTT5020
1 0 1 0 0 0 1 0
(A2 hex)
Option 26. PIP PLL Tuner VHF HIGH – UHF Crossover High Byte
b7 b6 b5 b4 b3 b2 b1 b0
Philips
UV1316MK2
0 0 0 1 1 1 1 0
(1D hex)
Alps
TELE9X062A
0 0 0 0 0 0 0 0
Samsung
TEXX2949PG28A 0 0 0 1 1 1 1 0
Siel
PT060
0 0 0 1 1 1 1 0
Temic
5001PH5-3X0003 0 0 0 0 0 0 0 0
Thomson
CTT5020
0 0 0 1 1 0 1 1
(1B hex)
Option 27. Language Available 1
B7: L7 =
DANISH
B6: L6 =
SWEDISH
B5: L5 =
ITALIAN
B4: L4 =
PORTUGUESE
B3: L3 =
SPANISH
B2: L2 =
FRENCH
B1: L1 =
GERMAN
B0: L0 =
ENGLISH
1: Language available
0: Language not available
Option 28. Language Available 2
B7: L15 =
CROATIC
B6: L14 =
POLISH
B5: L13 =
SLOVAK
B4: L12 =
CZECH
B3: L11 =
HUNGARY
B2: L10 =
GREEK
B1: L9 =
TURKEY
B0: L8 =
NORWEGIAN
1: Language available
0: Language not available
Option 29. Language Available 3 and Zoom Mode Available
B7: ZSP
=
16:9 ZOOM SUBTITLE MODE
B6: ZSB
=
16:9 ZOOM MODE
B5: ZCN
=
14:9 ZOOM MODE
B4: PNM
=
1 (Panoramic zoom mode)
B3: Tub
=
note 2
B2: Z.Def
=
note 3
B1: PMK
=
note 1
B0:
1: Available
0: Not available
Note 1 :
PMK
: Picture mode key
0
: Not available picture mode key from RC
1
: available picture mode key from RC

41

AK - 45
CHASSIS

Note 2:
Tub : Tube size
0
1

=
=

16:9 Tube size
4:3 Tube size

Note 3:
Z.Def
: Zoom Default Mode
0
1

=
=

16:9 mode default
4:3 mode default

Option 30. Country
B7: C4 =
note 1
B6: C3 =
note 1
B5: C2 =
note 1
B4: C1 =
note 1
B3: C0 =
note 1
B2: x
=
x
B1: x
=
x
B0: x
=
x
Note 1:
C5,C4,C3,C2,C1,C0
0, 0, 0,0,0
0, 0, 0,0,1
0, 0, 0,1,0
0, 0, 0,1,1
0, 0, 1,0,0
0, 0, 1,0,1
0, 0, 1,1,0
0, 0, 1,1,1
0, 1, 0,0,0
0, 1, 0,0,1
0, 1, 0,1,0
0, 1,0,1,1
0, 1,1,0,0
0, 1,1,0,1
0, 1,1,1,0
0, 1,1,1,1
1, 0,0,0,0
1, 0,0,0,1
1, 0,0,1,0
1, 0,0,1,1
1, 0,1,0,0
1, 0,1,0,1
1, 0,1,1,0
1, 0,1,1,1

=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=

=

Country

OTHER,
D,
A,
CH,
I,
F,
RSM,
B,
DK,
S,
N,
FIN,
GB,
IRL,
IS,
NL,
E,
P,
PL,
CZ,
H,
HR,
GR,
TR

Not allowed
Germany

Option 31. Prescaler MSP FM (AVL=OFF)
b7 b6 b5 b4 b3 b2 b1 b0
Prescaler MSP FM (AVL = OFF)
0 0 0 0 1 0 0 0

Prescaler MSP FM

(AVL = OFF)

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 1 0 0 0 (if virtual Dolby option is available)

Option 32. Prescaler MSP NICAM (AVL=OFF)
b7 b6 b5 b4 b3 b2 b1 b0
Prescaler MSP NICAM (AVL = OFF) 0 0 0 1 1 1 1 1

42

AK - 45
CHASSIS

Prescaler MSP NICAM (AVL = OFF)

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 1 1 1 1 1 (if virtual Dolby option is available)

Option 33. Prescaler MSP SCART (AVL=OFF)
b7 b6 b5 b4 b3 b2 b1 b0
Prescaler MSP SCART (AVL = OFF) 0 0 0 0 1 1 0 0

Prescaler MSP SCART (AVL = OFF)

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 1 1 0 0 1 (if virtual Dolby option is available)

Option 34. Prescaler MSP I2S (AVL=OFF)
b7 b6 b5 b4 b3 b2 b1 b0
Prescaler MSP I2S (AVL = OFF)
not defined yet
(if virtual Dolby option is available)
Option 35. Not used
B7: x
=
note 7
B6: x
=
note 6
B5: x
=
note 5
B4: x
=
note 4
B3: AV2S
=
Scart2 SVHS
B2: Macro
=
Macrovision
B1: DP
=
Dolby Prologic
B0: VD
=
Virtual Dolby
Option 36. Not used
B7: x
=
note 7
B6: TAT
=
1 Tilt and trapeze enabled
B5: SWF
=
1 Subwoofer enabled
B4: VLO
=
1 Variable line out
B3: VBUS
=
1 Vestelbus enabled
B2: x
=
x
B1: DVD
=
1 DVD enabled
B0: DVB
=
1 DVB enabled
Option 37. Reserved for USA
Option 38. TV Teletext Mode Selection, Child Lock, Equalizer Country
B7: VCR
=
note 7
B6: C
=
note 6
B5: LM
=
note 5
B4: EQ
=
note 4
B3: x
=
x
B2: CL
=
note 2
B1: T1
=
note 1
B0: T0
=
note 1
Note 1:
Teletext selection
T1, T0:
0,0 =
No TV Text
0,1 =
Simple TV Text (One page)
1,1 =
Fasttext/Toptext TV Text (Eight pages)
Note 2:
CL
=
0
=
1
=

Child Lock
Off
On (Active)

43

AK - 45
CHASSIS

Note 3:
RGB
=
0
=
1
=

RGB Menu Item active/inactive
RGB Menu Item inactive
RGB Menu Item active

Note 4:
EQ
=
0
=
1
=

Equalizer available
Equalizer not available
Equalizer available

Note 5:
LM
=
0
=
1
=

List Mode available
List Mode not available
List Mode available

Note 6:
C
=
0
=
1
=

Country Line available / Aps available or not
Country Line not available / Aps not available
Country Line available / Aps available

Note 7:
VCR
=
0
=
1
=

VCR Menu Item available / not available
VCR Menu Item not available
VCR Menu Item available

Option 39. Personal Preference Equalizer Band 1
b7 b6 b5 b4 b3 b2 b1 b0
EQUALIZER BAND 1
0 0 0 0 0 1 1 0
Option 40. Personal Preference Equalizer Band 2
b7 b6 b5 b4 b3 b2 b1 b0
EQUALIZER BAND 2
0 0 0 0 0 1 1 0
Option 41. Personal Preference Equalizer Band 3
b7 b6 b5 b4 b3 b2 b1 b0
EQUALIZER BAND 3
0 0 0 0 0 1 1 0
Option 42. Personal Preference Equalizer Band 4
b7 b6 b5 b4 b3 b2 b1 b0
EQUALIZER BAND 4
0 0 0 0 0 1 1 0
Option 43. Personal Preference Equalizer Band 5
b7 b6 b5 b4 b3 b2 b1 b0
EQUALIZER BAND 5
0 0 0 0 0 1 1 0
Option 44. Sound Effect (Standard; Music; Speech; Jazz; Pp)
b7 b6 b5 b4 b3 b2 b1 b0
SOUND EFFECT
0 0 0 0 0 1 1 0
Option 45. Volume Offset Left
VOLUME OFFSET LEFT

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 1 1 0

Option 46. Volume Offset Right
VOLUME OFFSET RIGHT

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 1 1 0

44

AK - 45
CHASSIS

Option 47. Volume Offset Center
b7 b6 b5 b4 b3 b2 b1 b0
VOLUME OFFSET CENTER
0 0 0 0 0 1 1 0
Option 48. Volume Offset Rear
b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 1 1 0

VOLUME OFFSET REAR
Option 49. Surround Delay

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 0 0 1

SURROUND DELAY
Option 50. FM Prescaler
FM PRESCALER for Stereo

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 1 1 0 0

FM PRESCALER for Dolby

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 1 0 0 1

Note: if virtual Dolby is available, this option is not used.
Option 51. NICAM Prescaler
NICAM Prescaler for Stereo

b7 b6 b5 b4 b3 b2 b1 b0
0 0 1 0 1 1 0 1

3D Panorama

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 1 0 1 1

NICAM Prescaler for Dolby

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 1 1 1 0

Note: if virtual Dolby is available, this option is not used.
Option 52. Scart Input Prescaler
Scart Input Prescaler for Stereo

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 1 0 0 0

Scart Input Prescaler for Dolby

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 1 1 1 1

Prescaler MSP Scart (AVL = OFF)

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 1 1 0 0 1 (if virtual Dolby option is available)

Note: if virtual Dolby is available, this option is not used.
Option 53. I2S Prescaler
I2S Prescaler for Stereo

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 1 1 0

I2S Prescaler for Dolby

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 1 1 0

Note: if virtual Dolby is available, this option is not used.
Option 54. Scart Output Prescaler
b7 b6 b5 b4 b3 b2 b1 b0
Scart Output Prescaler
0 1 1 1 1 1 1 1

45

AK - 45
CHASSIS

Option 55. Speaker Setup
Speaker Setup (L/R, L/C/R, L/R/S, L/C/R/S)

b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 0 0 0

Option 56. Audio Options Available Or Not
Attention: All bits on the Option 56 must be the “0” for MONO TV SETS
B7:
B6:
B5:
B4:
B3:
B2:
B1:
B0:

Nicam
ASD
VRS
CRM
…
LBE
Spa
Avl

=
=
=
=
=
=
=
=

note 7
note 6
note 5
note 4
x
note 2
note 1
note 0

Note 7:
Nicam =
0
=
1
=

Nicam available
Nicam not available
Nicam available

Note 6:
ASD
=
0
=
1
=

Auto Sound Detection available/not available
Auto Sound Detection not available
Auto Sound Detection available

Note 5:
VRS
=
0
=
1
=

Virtual Surround
VRS not available
VRS available

Note 4:
CRM
=
0
=
1
=

CARRIER MUTE OFF/ON
Sound carrier mute is ON in the Stereo Sound IC
Sound carrier mute is OFF in the Stereo Sound IC (i.e. option available)

Note 2:
LBE
=
0
=
1
=

LBE (Dynamic Bass)
LBE not available
LBE available

Note 1:
Spa
=
0
=
1
=

Spatial Effect available
Spatial Effect not available
Spatial Effect available

Note 0:
Avl
=
0
=
1
=

Automatic volume level available on the Menu
Automatic volume level not available
Automatic volume level available

Option 57. Stereo Threshold
B7: b7 =
note 1
Remark:
B6: b6 =
note 1
B5: b5 =
note 1
-Threshold for all FM A2 signals to switch from MONO to STEREO.
B4: b4 =
note 1
-For first check after programme change half value is changed (0Ch) 19h/2
B3: b3 =
note 1
-For switching from STEREO back to MONO: 19h/4 *3
B2: b2 =
note 1
B1: b1 =
note 1
B0: b0 =
note 1

46

AK - 45
CHASSIS

Note 1:
b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 1 1 0 0 1

MSP Stereo/Mono Threshold

Option 58. MSP Audio Flags
B7: b7 =
x
B6: b6 =
x
B5: b5 =
x
B4: Trs =
note 1
B3: Trb =
note 1
B2: Bbe =
note 1
B1: Spa =
note 1
B0: Avl =
note 1
Note 1:
Defines whether the feature is toggled ON or OFF in the menu and stored.
0
: OFF
1
: ON
Option 59. NICAM Threshold
b7 b6 b5 b4 b3 b2 b1 b0
MSP NICAM Threshold
0 1 1 0 0 1 0 0
Option 60. Power Delay Time
B7: NZ =
x
B6: HM =
x
B5: L5 =
note 3
B4: L4 =
note 3
B3: L3 =
note 3
B2: L2 =
note 3
B1: L1 =
note 3
B0: L0 =
note 3
Note 3:
L7 L6 L5
Default Value:
x
x
1
1000 MSEC = 1SN
Number
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

L7L6L5L4L3L2L1L0

00000000
00000001
00000010
00000011
00000100
00000101
00000110
00000111
00001000
00001001
00001010
00001011
00001100
00001101
00001110
00001111
00010000
00010001
00010010
00010011

=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=

L4
1

L3
0

L2
0

L1
0

Delay
4 Sec
4,25 Sec
4,5 Sec
4,75 Sec
5 Sec
5,25 Sec
5,5 Sec
5,75 Sec
6 Sec
6,25 Sec
6,5 Sec
6,75 Sec
7 Sec
7,25 Sec
7,5 Sec
7,75 Sec
8 Sec
8,25 Sec
8,5 Sec
8,75 Sec

L0
0
Number
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51

47

L7L6L5L4L3L2L1L0

00100000
00100001
00100010
00100011
00100100
00100101
00100110
00100111
00101000
00101001
00101010
00101011
00101100
00101101
00101110
00101111
00110000
00110001
00110010
00110011

=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=

Delay
12 Sec
12,25 Sec
12,5 Sec
12,75 Sec
13 Sec
13,25 Sec
13,5 Sec
13,75 Sec
14 Sec
14,25 Sec
14,5 Sec
14,75 Sec
15 Sec
15,25 Sec
15,5 Sec
15,75 Sec
16 Sec
16,25 Sec
16,5 Sec
16,75 Sec

AK - 45
CHASSIS

20
21
22
23
24
25
26
27
28
29
30
31

00010100
00010101
00010110
00010111
00011000
00011001
00011010
00011011
00011100
00011101
00011110
00011111

=
=
=
=
=
=
=
=
=
=
=
=

9 Sec
9,25 Sec
9,5 Sec
9,75 Sec
10 Sec
10,25 Sec
10,5 Sec
10,75 Sec
12 Sec
12,25 Sec
12,5 Sec
12,75 Sec

52
53
54
55
56
57
58
59
60
61
62
63

48

00110100
00110101
00110110
00110111
00111000
00111001
00111010
00111011
00111100
00111101
00111110
00111111

=
=
=
=
=
=
=
=
=
=
=
=

17 Sec
17,25 Sec
17,5 Sec
17,75 Sec
18 Sec
18,25 Sec
18,5 Sec
18,75 Sec
19 Sec
19,25 Sec
19,5 Sec
19,75 Sec

AK - 45
CHASSIS

Decimal - Binary Conversion Table

0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

76543210
00000000
00000001
00000010
00000011
00000100
00000101
00000110
00000111
00001000
00001001
00001010
00001011
00001100
00001101
00001110
00001111
00010000
00010001
00010010
00010011
00010100
00010101
00010110
00010111
00011000
00011001
00011010
00011011
00011100
00011101
00011110
00011111

Bit Position
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63

49

76543210
00100000
00100001
00100010
00100011
00100100
00100101
00100110
00100111
00101000
00101001
00101010
00101011
00101100
00101101
00101110
00101111
00110000
00110001
00110010
00110011
00110100
00110101
00110110
00110111
00111000
00111001
00111010
00111011
00111100
00111101
00111110
00111111

AK - 45
CHASSIS

14.4.OPTION TABLE RECOMMENDED VALUES
X listed in the option can be 0 or 1
OPTION
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053

28" 4:3 MULTI
X2 XXXXXX10
XX XXXXXXXX
23 001XXX11
XX XXXXXXX0
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XX0XXX1X
A1 11000001
0B 00001111
X2 XXXXX011
8E 10001110
03 00000011
06 00000110
15 10000101
AA 10101010
09 00001001
A2 10100010
1B 00011011
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
FF 11111111
FF 11111111
FF 11111111
XX XXXXXXX
0F 00001111
23 00100011
0E 00001110
XX XXXXXXXX
XX XXXXXXXX
X4 XXXXX1XX
XX XXXXXXXX
AF 11001111
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
41 01000001
1B 00011011
06 00000110

28" 16:9 MULTI
X2 XXXXXX10
XX XXXXXXXX
23 001XXX11
XX XXXXXXX0
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XX0XXX1X
01 00000001
0B 00001111
X7 XXXXX111
8E 10001110
03 00000011
06 00000110
15 10000101
AA 10101010
09 00001001
A2 10100010
1B 00011011
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
FF 11111111
FF 11111111
EF 11101111
XX XXXXXXX
0F 00001111
23 00100011
0E 00001110
XX XXXXXXXX
XX XXXXXXXX
X4 XXXXX1XX
XX XXXXXXXX
AF 11001111
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
41 01000001
1B 00011011
06 00000110

50

28" 16:9 PAL I
X2 XXXXXX10
XX XXXXXXXX
23 001XXX11
XX XXXXXXX0
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XX0XXX1X
01 00000001
04 00001111
X7 XXXXX111
8E 10001110
03 00000011
06 00000110
15 10000101
AA 10101010
09 00001001
A2 10100010
1B 00011011
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
FF 11111111
FF 11111111
EF 11101111
XX XXXXXXX
0F 00001111
23 00100011
0E 00001110
XX XXXXXXXX
XX XXXXXXXX
X4 XXXXX1XX
XX XXXXXXXX
AF 11001111
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
XX XXXXXXXX
41 01000001
1B 00011011
06 00000110

AK - 45
CHASSIS

054
055
056
057
058
059
060

75
00
DE
19
00
64
10

01110101
00000000
11011110
00011001
00000000
01100100
00010000

75
00
DE
19
00
64
10

01110101
00000000
11011110
00011001
00000000
01100100
00010000

51

75
00
DE
19
00
64
10

01110101
00000000
11011110
00011001
00000000
01100100
00010000

AK - 45
CHASSIS

14.5.SCREEN ADJUSTMENT (FBT SCREEN)

SCREEN
ADJUST
POT

From the option list change option 2 bit 6 from 0 to 1 for disabling vertical scan. Adjust horizontal line
via screen adjust pot. as thin as possible. Then press 0 to leave service menu.

52

AK - 45
CHASSIS

14.6.GEOMETRY ADJUSTMENT
4:3 FORMATS
4:3 MODE

16:9 MODE

53

AK - 45
CHASSIS

16:9 FORMATS
AUTO MODE

54

AK - 45
CHASSIS

REGULAR MODE

55

AK - 45
CHASSIS

ZOOM 14:9 MODE

56

AK - 45
CHASSIS

ZOOM 16:9 MODE

57

AK - 45
CHASSIS

SUBTITLE ZOOM MODE

58

AK - 45
CHASSIS

FULL MODE

59

AK - 45
CHASSIS

PANORAMIC MODE

60

61

SC3

SVHS-Y

IF

SC2

SC1

SCL

SDA

SC2_RGB/DVD/DVB

SC1_RGB

TU200
38.9MHz-TV TUNER

Sound

Video

TEA615C
VIDEO SW

PI5V330-SOIC
RGB SW

K9656M
EPCOS
SAW
Filter

K3958M
EPCOS
SAW
Filter

FB

B

G

R

TO_PIP

SC2_V_OUT

EXT_CVBS/Y

TDA9885T
QSS

CVBS

DVD/DVB/BAV

FRONT/SC3

SC2

SC1

SDA

SCL

SC1_V_OUT

TV_LINK

MSP34XXG

FB

B

G

R

SCL

SDA

R

L

CVBS_TEXT

SCL
SDA
SYNC

24CO8
(E2PROM)

SC3_V_OUT

TDA1308

SDA5555
(MicroController)

PIP

VDP313XY

OSD_R

R

L

RGB AMPLIFIER
TDA 6107
(PHILIPS)

Horizontal

Headphone

TDA7269A
AUDIO
AMPLIFIER

OSD_FBL

OSD_B

OSD_G

B

G

R

8 ohm
12W

8 ohm
12W

CRT

STV9379FA

Vertical Stage

B

G

R

Yoke

AK - 45
CHASSIS

15. BLOCK DIAGRAM
General Block Diagram of chassis 11AK45

AK - 45
CHASSIS

16. CIRCUIT DIAGRAMS
16.1 Schematic Diagram of Video-IF Circuit
I

H

G

F

E

D

C

B

Page 63

A

1

2

3

4

62

5

6

7

AK - 45
CHASSIS

16.1 Schematic Diagram of Video-IF Circuit
I

H

G

F

E

D

C

Page 62

B

A

8

9

10

11

63

12

13

14

AK - 45
CHASSIS

16.2 Schematic Diagram of µ-Controller Circuit
I

H

G

F

E

D

C

B

A

1

2

3

4

64

5

6

7

AK - 45
CHASSIS

16.3 Schematic Diagram of Deflection Circuit
I

H

G

F

E

D

C

16.4 Schematic Diagram of Power Switch Circuit

B

A
11SW01-3

8

9

10

11

65

12

13

14

AK - 45
CHASSIS

16.5 Schematic Diagram of SMPS Circuit
I

H

G

F

E

D

C

B

Page 67

A

1

2

3

4

66

5

6

7

AK - 45
CHASSIS

16.5 Schematic Diagram of SMPS Circuit
I

H

G

F

E

D

C

Page 66

B

A

8

9

10

11

67

12

13

14

AK - 45
CHASSIS

16.6 Schematic Diagram of Sound Circuit
I

H

G

F

E

D

C

B

Page 69

A

1

2

3

4

68

5

6

7

AK - 45
CHASSIS

16.6 Schematic Diagram of Sound Circuit
I

H

G

F

E

D

C

Page 68

B

A

8

9

10

11

69

12

13

14

AK - 45
CHASSIS

16.7 Schematic Diagram of CRT Socket Circuit
I

H

G

F

E

D

C

B

A

1

2

3

4

70

5

6

7

AK - 45
CHASSIS

16.8 Schematic Diagrams of Control Panel Unit
I

H

G

F

E

D

C

B

A

8

9

10

11

71

12

13

14

AK - 45
CHASSIS

16.9 Schematic Diagram of Remote Control Circuit
I

H

G

F

E

D

C

B

A

1

2

3

4

72

5

6

7

AK - 45
CHASSIS

17. HOW TO UPDATE THE TECHNICAL INFORMATION
17.1 How to update the Technical Information appeared on this Service Manual (and
relatives)
17.1.1. Web site: https://www.vestelservice.com
17.1.2.Select: Technical Support
17.1.3. Login: 101278
17.1.4. Password: SHPII278
By this access you can consult the latest schematic diagram or request the Parts Listing of a concrete Production Date / Serial Number.
By this way it can be also consulted the issued Technical Reports (Service Bulletins).
It can be found a Label in every chassis with additional information, i.e. the used EEPROM. See below.
On the next page are given details about the Code Bar Label.

17.2 NVM / EEPROM recorder
There is available the NVM / EEPROM recorder as spare part:
Part Reference: V20096887
Description: MD.ASY.PONYPROG
Dom. Price Code: AT
Exp. Price Code: BE
This EEPROM recorder uses the free software “Pony” available at http://www.lancos.com/ppwin95.html
Note: In case of Windows platform it is recomended the PonyProg v1.17h version.

17.3 Chassis Label Information
B+ Voltage

Batch number

Chassis code
number

25423426
- 150V
200101577
PAL /BG
Y237
- 1902 - 277

EEPROM number

Production line
number

73

Consecutive serial number
of the related batch

AK - 45
CHASSIS

17.4 Code Bar Label Information

Product Code

From the beginning of September.2002,
the production month and year will be
indicated inside the box as shown.

Year
Month
Year
Consecutive number

Consecutive number
Year
Batch number

Product code:

It is the code that indicates Vestel internal identification
number of the complete TV set.

Year :

Production year in two digits, e.g.: 02 for 2002

Month :

Production month in two digits; e.g.: 04 for April.

Batch number :

It is a Vestel number that is assigned by the Planning
Dept. according to the customer orders. (For internal
use by Vestel)

Consecutive Number:

The number that indicates the sequence of the product
related to the same batch number.

74

AK - 45
CHASSIS

Notes:

75

AK - 45
CHASSIS

No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.

Technical information and Production:
Vestel Electronik AS
PRINTED BY:

ON:

Think Ecology, please use

Technical information re-issued:
SHARP ELECTRONICA ESPAÑA S.A.
Service Manual Group
Engineering Dept.
Polígono Industrial Can Sant Joan
08190 Sant Cugat del Vallès
Barcelona
Spain

RECYCLED PAPER
76



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 92
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c72a76ca-abaa-4a09-ae0f-9d3e7615934f
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Keywords                        : SERVICE MANUAL, 28LF92EES,00 VERSION, AK-45 CHASSIS, CTV
Create Date                     : 2004:04:20 12:09:39Z
Modify Date                     : 2004:04:26 17:01:37+02:00
Metadata Date                   : 2004:04:26 17:01:37+02:00
Creator Tool                    : PageMaker 7.0
Document ID                     : uuid:2167d4ec-797a-424d-b85a-c385a01f9477
Format                          : application/pdf
Creator                         : Juan A. Berlanga
Title                           : 28LF92EES_SM_00 Vers
Description                     : SERVICE MANUAL
Author                          : Juan A. Berlanga
Subject                         : SERVICE MANUAL
EXIF Metadata provided by EXIF.tools

Navigation menu