331014786 Generic ATM Interface User Guide
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 90
Information in this document is subject to change without notice.
No part of this document may be reproduced or transmitted in any form or by any means, for any purpose,
without the express written permission of TEMENOS HEADQUARTERS SA.
COPYRIGHT 2007 - 2008 TEMENOS HEADQUARTERS SA. All rights reserved.
Temenos - Country Model Banks
Generic ATM Framework
User Guide
GPACK
2
Generic ATM Framework
Amendment History
Version
Date
Author
Status
Description
0.1
31-Jan-2013
Pradeep M T
Draft
Initial Release
0.2
20-Mar-2013
Pradeep M T
Amendment
New Tables were added
1
20-Mar-2013
Haripriya
Base lined
1.1
04-Apr-2013
Pradeep M T
Amendment
Charge Tables were modified
1
04-Apr-2013
Pradeep M T
Base lined
2.1
17-May-2013
Pradeep M T
Amendment
Phoenix Interface Integrated
2.2
28-June-2013
Pradeep M T
Amendment
Generic issues were fixed
3.0
01-July-2013
Pradeep M T
Base lined
Comments:
The user guide is created for Multiport ATM Interface of ISO8583:87/93 versions and Phoenix nix
Interface.
GPACK
3
Generic ATM Framework
Table of Contents
1. Assumptions 8
2. Functionality Overview 8
Application Servers supported by ATM Interface 8
3. General Flow diagram 9
How is it working? 9
Purpose .............................................................................................................................. 9
Message processing in T24 ............................................................................................. 10
4. Transactions Supported 11
4.1 NETWORK MESSAGES ....................................................................................... 11
4.2 BALANCE ENQUIRY ............................................................................................. 11
4.3 CASH WITHDRAWAL ........................................................................................... 12
4.4 MINI STATEMENT ................................................................................................ 13
4.5 STATEMENT REQUEST* ..................................................................................... 13
4.6 PURCHASE TRANSACTIONS ............................................................................. 14
4.7 INTRABANK TRANSACTIONS ............................................................................. 15
4.8 CASH DEPOSIT* ................................................................................................... 16
4.9 UTILITY BILL PAYMENT* ..................................................................................... 16
4.10 CHEQUE DEPOSIT* ............................................................................................. 17
4.11 CHEQUE BOOK REQUEST* ................................................................................ 17
4.12 FULL REVERSALS ............................................................................................... 18
4.13 PARTIAL REVERSALS ......................................................................................... 18
4.14 PAYMENT VIA TELLER*....................................................................................... 19
5. ATM Parameterization 19
5.1 INTRF.MESSAGE ................................................................................................. 19
5.2 INTRF.MAPPING ................................................................................................... 23
5.3 ATM.PARAMETER ................................................................................................ 28
5.4 ATM.BRANCH ....................................................................................................... 31
5.5 ATM.BIN.ACCT ..................................................................................................... 32
5.6 ATM.UTIL.TABLE .................................................................................................. 33
5.7 ATM.POS.MERCHANT.ACCT .............................................................................. 34
5.8 ATM.POS.BIN.ACCT ............................................................................................. 35
5.9 ATM.TRANSACTION ............................................................................................ 36
5.10 ATM.DUAL.TRANSACTION .................................................................................. 39
5.11 ATM.RES.CODE.TABLE ....................................................................................... 39
5.12 ATM.STMT.REQ .................................................................................................... 40
5.13 RAD.LOG.PARAMETER ....................................................................................... 41
GPACK
4
Generic ATM Framework
5.14 ATM.CHG.TABLE .................................................................................................. 42
5.15 ATM.CHG.DETAIL ................................................................................................. 46
5.16 ATM.SPLIT.CHG.TABLE ....................................................................................... 47
5.17 ATM.GEN.MAPPING ............................................................................................. 49
5.18 VERSIONS ............................................................................................................ 51
5.19 ENQUIRES ............................................................................................................ 52
5.20 SERVICES ............................................................................................................. 52
5.21 LOCAL REFERENCE FIELDS .............................................................................. 52
5.22 Main Subroutines Descriptions .............................................................................. 53
6. Transaction Message Format 59
6.1 Base24/ISO Transaction Message 59
6.1.1 Message Header ................................................................................................... 59
6.1.2 Bitmap Message Format........................................................................................ 59
6.1.2.1 Message type identifier 59
6.1.2.2 Bitmaps 59
6.1.2.3 Data Elements Definitions 60
Field #2: Primary Account Number (PAN) 60
Field #3: Processing Code 60
Field #4: Transaction Amount 61
Field #5: Settlement Amount 61
Field #6: Equivalent Amount (Cardholder Billing) 61
Field #7: Transmission Date and Time 61
Field #9 – Conversion rate, Settlement 62
Field #10: Conversion Rate (Cardholder Billing) 62
Field #11: System Trace 62
Field #12: Local Transaction Time 62
Field #13: Local Transaction Date 63
Field #15: Settlement Date 63
Field #18: Merchant Type 63
Field #19: Acquiring Institution Country Code 63
Field #22: Point-of-Service Entry Mode 63
Field #25: Point-of-Service Condition Code 63
Field #26: Point-of-Service PIN Capture Code 63
Field #28: Amount, Transaction fee 64
Field #29: Amount, settlement fee 64
Field #32: Acquiring Institution Code 64
Field #33: Forwarding Institution Code 64
Field #35: Track-2 Data 64
Field #37: Retrieval Reference Number 64
Field #38: Authorization Number 65
GPACK
5
Generic ATM Framework
Field #39: Response Code 65
Field #41: Card Acceptor Terminal Identification 65
Field #42: Card Acceptor Identification Code 65
Field #43: Card Acceptor Name/Location 65
Field #44: Additional Response Data 65
Field #45: Track-1 Data 65
Field #48: Additional Data 66
Field #49: Transaction Currency Code 66
Field #50: Currency Code, Settlement 66
Field #51: Currency Code, Cardholder Billing 66
Field #54: Additional Amounts 67
Field #60: Terminal Totals 67
Field #63: Reversal Reason Code 67
Field #70: Network Management Information 67
Field #74: Credits, Number 68
Field #75: Credits, Reversal Number 68
Field #76: Debits, Number 68
Field #77: Debits, Reversal Number 68
Field #78: Transfers, Number 68
Field #79: Transfers, Reversal Number 68
Field #80: Inquiries, Number 68
Field #81: Authorizations, Number 69
Field #82: Credits, Processing Fee Amount 69
Field #83: Credits, Transaction Fee Amount 69
Field #84: Debits, Processing Fee Amount 69
Field #85: Debit, Transaction Fee Amount 69
Field #86: Credits, Amount 69
Field #87: Credits, Reversal Amount 69
Field #88: Debits, Amount 69
Field #89: Debits, Reversal Amount 70
Field #90: Original Data Elements 70
Field #95: Replacement Amounts 70
Field #97: Amount, Net Settlement 70
Field #99: Settlement Institution Identification Code 70
Field #100: Receiving Institution Identification Code 70
Field #102: From Account Number 70
Field #103: To Account Number 71
Field #127: For Private Use 71
Field #128: MAC 71
6.2 PHOENIX Transaction Message 71
GPACK
6
Generic ATM Framework
6.2.1 Message type identifier .......................................................................................... 71
6.2.2 Data Elements Definitions ..................................................................................... 71
Field #1: Customer Identification Number 71
Field #2: Primary Account Number (PAN) 72
Field #3: Processing Code 72
Field #4: Transaction Amount 72
Field #5: Settlement Amount 73
Field #6: Equivalent Amount (Cardholder Billing) 73
Field #7: Transmission Date and Time 73
Field #8 – Conversion rate, Settlement 73
Field #9 – Transaction rate 73
Field #10: System Audit Trace 73
Field #11: Local Transaction Time 74
Field #12: Local Transaction Date 74
Field #13: Expiry Date 74
Field #14: Settlement Date 74
Field #17: Merchant Type 74
Field #18: Source Channel Type 74
Field #19: Destination Type 75
Field #20: Acquiring Institution Country Code 75
Field #21: Point-of-Service Country Mode 75
Field #22: Point-of-Service Entry Mode 75
Field #23: Point-of-Service Condition Code 75
Field #24: Point-of-Service PIN Capture Code 75
Field #25: Acquiring Institution Code 75
Field #26: Forwarding Institution Code 75
Field #27: Track-2 Data 76
Field #28: Track-3 Data 76
Field #29: Retrieval Reference Number 76
Field #30: Authorization Number 76
Field #31: Response Code 76
Field #32: Card Acceptor Terminal Identification 76
Field #33: Card Acceptor Identification Code 77
Field #34: Card Acceptor Name/Location 77
Field #35: Additional Response Data 77
Field #36: Track-1 Data 77
Field #37: Additional Data 77
Field #38: Transaction Currency Code 78
Field #39: Currency Code, Settlement 78
Field #40: Currency Code, Cardholder Billing 78
GPACK
7
Generic ATM Framework
Field #47: Original Data Elements 78
Field #48: Replacement Amounts 78
Field #50: From Account Number 79
Field #51: To Account Number 79
Field #53: Additional Data 79
7. ISO Message Field Format 80
7.1 Base24/ ATM 80
7.1.1 Online Transactions ............................................................................................... 80
7.1.2 Force Posts/Advice Transactions .......................................................................... 81
7.1.3 Reversal Transactions ........................................................................................... 83
7.1.4 Network Transactions ............................................................................................ 84
7.2 Phoenix 85
7.2.1 Online Transactions ............................................................................................... 85
7.2.2 Reversal Transactions ........................................................................................... 86
7.2.3 Network Transactions ............................................................................................ 87
8. Frequently asked Questions 88
9. Exceptions 90
GPACK
8
Generic ATM Framework
1. Assumptions
It is assumed that the reader of this document is familiar with the navigation around T24 product and is
familiar with the T24 Accounting concepts, FT, AC.LOCKED.EVENTS Modules.
This document provides information about the Functional workflow, templates/versions/enquires used
and ISO Message standards supported in ATM Interface.
2. Functionality Overview
ISO 8583 is a standard for creating and reading financial transaction messages including Point of Sale
(POS) transactions, Automated Teller Machines (ATM) and network-to-network, real-time financial
transactions. These messages enable consumers to withdraw money from ATM's and conduct
business in a real-time world.
The ATM Interface is developed as a middle layer between the ATM SWITCH and T24. The interface
consists of a plug-in for Application Server to receive the messages via a dedicated port and translate
the ISO messages. Application Server sends the ISO message to T24 where the ISO message
converted to OFS message format based on the mapping files to be updated on to T24 applications.
After the transaction has been completed at T24, the response ISO messages are formatted within the
scope of the ATM Interface. The response messages are indicated with the appropriate error or ok
status depending upon the T24 applications reply status.
The protocol used for communication between the host and the switch is usually TCP/IP via sockets.
ATM interface provide a high performance multi-threaded synchronous socket listener that has custom
functionality/intelligence built-in for handling ISO messages with length prefix through TCP/IP.
Application Server can be configured for listening ISO messages on any number of ports as required
by the load on the site. However, a judicious choice should be made considering the load so that not
to leave too many ports listening idle. The switch should try to throw open multiple
sockets/connections on the same port(s) when the load increases.
The main features of this interface is to caters all the standard ATM operations like Cash withdrawal,
Point of Sale, Balance enquiry, Mini statement, Statement request, Account transfer, Cash Deposit
and Cheque Book Request.
Note: ATM Interface supports ISO 8583:87 and ISO 8583:93 versions only. All Functionality specified
below is supported for both ISO 8583:87/93 versions.
Application Servers supported by ATM Interface
These are the Application servers supported by ATM Interface.
TC Server
Jboss
Websphere
Weblogic
GPACK
9
Generic ATM Framework
3. General Flow diagram
0800/1800
0420/1420
0200/1200
0220/1220 (ISO MESSAGE)
0810/1810
0430/1430
0210/1210
0230/1230 (ISO MESSAGE)
How is it working?
When a customer uses an ATM terminal connected to the switch server, the switch sends a message
to T24. Depending upon the message and various functions, accounting entries are generated in T24
and responded either with an error message or requested details back to the ATM Interface. These
transactions could be done from any ATM and depending on where and which customer is doing the
transaction we could broadly classify them as:
ON US TRANSACTIONS – T24 customer doing transaction in an ATM attached to T24
branch
NETWORK TRANSACTIONS - T24 customer doing transaction in an ATM attached to non-
T24 / other institution’s branches
LORO TRANSACTIONS - Non-T24 customers doing transaction in ATM attached to T24
branch.
Once the interface is started, the parameters required for the Interface are read from the mapping
tables. Java Listener listens to a port where ATM Switch will be sending the ISO8583 messages.
Once the raw ISO8583 message is read from the port, ATM Interface converts this raw ISO message
into OFS message format and sends it to T24, for the execution of corresponding transaction. After
the transaction has been completed at T24, the response messages are formatted in ISO8583 format
and sent back to ATM Switch.
Purpose
All online transactions will be approved or rejected by T24.
The time-out will be agreed between Gpack and the switch on a case to case basis
considering the prevailing network and other conditions.
STAN, DATE.TIME will be used as unique identifier for each message by T24 unless
otherwise specified.
ATM
MACHINE
(Switch)
T24 HOST
ISO Request ISO Response
ATM FRAMEWORK
Application Server
GPACK
10
Generic ATM Framework
The following section will explain functionally about the architecture of ATM Interface:
Message processing in T24
Java listener keeps on
listening to the port for the
messages from ATM
Switch
ISO Request Message
from Switch
PORT
Application Server
Request to T24
ATM Interface
The routine will parse the ISO
string and classify the type of
message. Read the mapping
record based on request
message and convert the ISO
message to OFS message
AT.ISO.PRE.PROCESS.MSG
(Convert the ISO message to OFS message
<T24 understandable format>)
Accounting entries for
Debit/Credit will be raised for
the particular transaction
Processing Request in T24
AT.ISO.POST.PROCESS.MSG
(Convert the OFS message to ISO message)
Conversion/format routine
triggers and forms the
response message in ISO
format
Application Server
PORT
ISO Response Message to
Switch
GPACK
11
Generic ATM Framework
4. Transactions Supported
Below are the transactions supported in Generic ATM Interface
Network Messages
Balance Enquiry
Cash Withdrawal Transactions
Mini Statement Messages
Statement Request*
POS Transactions
Intra Bank Funds Transfer Transactions
Cash Deposit*
Cheque Issue*
Cheque Deposit*
Utility Bill Payments*
Cash Withdrawal Reversal
Intra Bank Funds Transfer Reversal
POS Reversal
Cash deposit Reversal*
Cheque Deposit Reversal*
Utility Bill Payments Reversal*
4.1 NETWORK MESSAGES
Network transactions are used as handshake between ATM switch and T24 host system. The Network
messages will be initiated using a 0800 request with network-management-information-code (Sign on
– ‘001’, Signoff – ‘002’, Echo Test - '301') from ATM switch and the T24 host will respond with an
0810.
4.2 BALANCE ENQUIRY
When a customer does the balance enquiry at ATM terminal, the request message will be sent to T24
Host. T24 will check the corresponding account and then get the balance details by launching an
enquiry. The charge amount will be collected from the customer account if applicable.
GPACK
12
Generic ATM Framework
4.3 CASH WITHDRAWAL
When any customer does a cash Withdrawal in ATM, machine will raise a debit to the cardholder’s
account/Bank Account and a corresponding credit to the ATM cash account. If T24 is on-line,
withdrawals are only allowed if sufficient funds are available.
The below workflow describes the applications and accounting levels entries raised during On-Us,
Remote On-Us, Off-Us transactions
Note: Same Workflow happens when T24 goes Off-line and advice messages are posted.
GPACK
13
Generic ATM Framework
4.4 MINI STATEMENT
When a customer does the mini statement transaction at ATM terminal, the request message will
be sent to Host. T24 will check the corresponding account and then get the last 10 transaction
details for that account by launching an enquiry.
The below workflow describes the applications and accounting levels entries raised during On-Us
transactions.
4.5 STATEMENT REQUEST*
When a customer does the statement request transaction at ATM terminal, the request message will
be sent to Host. T24 will check the corresponding account and then updates a local table in T24 with
the account number and the statement requested date.
The below workflow describes the applications and accounting levels entries raised during On-Us
transactions.
GPACK
14
Generic ATM Framework
4.6 PURCHASE TRANSACTIONS
There are two methods of POS transactions processed into T24.
BASEI & BASEII[Force Posts]*
STANDARD TRANSACTION
Note: Any one method only can be implemented for POS Transactions [Bank & Switch has to
decide on this]
Base I:
When a customer purchases goods from any POS terminal the transaction message will be sent to
T24 Host, ATM interface will lock the amount in the customer’s account based on the lock period
mentioned in Parameter table.
The below workflow describes the applications and accounting levels entries raised during
Authorization request based transactions.
Base II & Standard Transactions:
When a customer purchases goods from any POS terminal the transaction message will be sent to
T24 Host, ATM interface will validate the transaction terminal, account, amount and will raise an
accounting entry in T24.
Difference between Base II and standard transactions is Base II will be sent as Advice message
whereas other case will be sent as On-line message
The below workflow describes the applications and accounting levels entries raised during On-line
& Base II based transactions.
GPACK
15
Generic ATM Framework
4.7 INTRABANK TRANSACTIONS
When a customer does account to account transfer (within bank) via the Atm terminal the transaction
message will be sent to Host, T24 will validate the debit and credit account, available balance in Debit
account and based on the validation check, T24 will post the transaction and send the response to the
switch with the processing status.
The below workflow describes the applications and accounting levels entries raised during On-Us
transactions
Note: Same Workflow happens when T24 goes Off-line and advice messages are posted.
GPACK
16
Generic ATM Framework
4.8 CASH DEPOSIT*
When a customer does cash deposit in the ATM terminal, the transaction messages will be sent to
T24 host to raise an accounting entry. T24 will validate the account and credit the amount to the
customer’s account and debit the ATM GL account.
The below workflow describes the applications and accounting levels entries raised during On-Us
transactions
Note: Same Workflow happens when T24 goes Off-line and advice messages are posted.
4.9 UTILITY BILL PAYMENT*
A Customer can go into an ATM and pay his bills. T24 will debit the cardholder’s account and a
corresponding credit to the ATM cash account. If T24 is on-line, Bill payments are only allowed if
sufficient funds are available.
The below workflow describes the applications and accounting levels entries raised during On-Us,
Remote On-Us transactions
Note: Same Workflow happens when T24 goes Off-line and advice messages are posted.
GPACK
17
Generic ATM Framework
4.10 CHEQUE DEPOSIT*
When a customer does Cheque deposit in the ATM terminal, the transaction messages will be sent to
T24 host to raise an accounting entry. T24 will validate the account and credit the amount to the
customer’s account and debit the ATM GL account.
The below workflow describes the applications and accounting levels entries raised during On-Us
transactions
Note: Same Workflow happens when T24 goes Off-line and advice messages are posted.
4.11 CHEQUE BOOK REQUEST*
When a customer requests for the Cheque book at ATM terminal, the request message will be sent to
Host. T24 will check the corresponding account and create a new request in CHEQUE.ISSUE table
with status as Requested.
The below workflow describes the applications and accounting levels entries raised during On-Us
transactions.
GPACK
18
Generic ATM Framework
4.12 FULL REVERSALS
When a customer does any reversal of financial transactions in any ATM terminal/POS, switch will
send the request message to T24 for processing. Switch will wait response message from T24.
In case of any network issues/T24 host down the response for request message will not reach the
switch. In such a case switch will send the reversal message to T24 host to reverse the original
transaction. T24 will get the original transaction reference based on the original data sent by switch
and reverse the accounting entries in T24
Reversal will be done immediately whenever the reversal request received by T24.
4.13 PARTIAL REVERSALS
When a customer does any partial reversal of financial transactions in any ATM terminal/POS,
switch will send the request message to T24 for processing.
In case of FUNDS TRANSFER, we validate if original transaction is already stored in T24. If so,
we will credit customer account based on the replacement amount sent.
In case of AC.LOCKED.EVENTS, we validate if original transaction is already stored in T24. If so,
we will release the amount locked and then lock the amount sent in replacement amount field.
Reversal will be done immediately whenever the reversal request received by T24.
GPACK
19
Generic ATM Framework
4.14 PAYMENT VIA TELLER*
Customer can directly walk to Teller and pay Bill payments. The AT.ISO.GEN.MSG routine attached
to the version passes the data to Third party via jar file placed. If a successful response is received
from third party vendor, then the payment is completed. TT or FT can be raised based on this process.
Note: Version provided above is for reference purpose to understand the functional flow.
5. ATM Parameterization
5.1 INTRF.MESSAGE
This Application forms the skeleton of ATM Interface. This application contains the position, length for
each and every data element of RAW ISO Message as per ISO 8583 standards. This application
forms the base for Conversion/formatting the ISO message to OFS message and it’s vice versa.
File Type: H
GPACK
20
Generic ATM Framework
File Classification: INT
INTRF.MESSAGE field description and Population Type
NO
Field
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
TRACK.FILE.NAME
A
For Future Use
3
INTRF.PRE.RTN
A
This field hold routine name. Routine attached
here should have one argument value passed.
Customized hook routines can be attached here
for pre-mapping validations. Click here for a
sample screenshot.
4
MAPPING.ID
A
This field holds the values for forming
INTRF.MAPPING data record Id. A routine can be
attached here or data values i.e. ISO‖ 0 3 70 (In
different multi-values) can be stored here. Click
here for a sample screenshot.
5
INTRF.HEAD.NAME
A
Interface specific Header name. In reference to
ISO to be used as names in the specification. Ex:
Message Type Indicator. If no header is used.
This field can be left as null
6
INTRF.HEAD.DELIM
A
For future use
7
INTRF.HEAD.POS
A
Header position. Represents Header field
numbers. If no header is used. This field can be
left as null
8
INTRF.HEAD.LEN
A
Length of the field. If no header is used. This field
can be left as null
9
INTRF.HEAD.TYPE
A
Field type in case of ISO ex: FIXED, VARIABLE,
BITMAP. If no header is used. This field can be
left as null
10
INTRF.HEAD.S.M
A
For future use
11
INTRF.HEAD.MAND
A
For future use
12
INTRF.FLD.NAME
A
Interface specific field name. In reference to ISO
to be used as names in the specification. Ex:
Message Type Indicator.
13
INTRF.FLD.DELIM
A
For future use
14
INTRF.FLD.POS
A
Field position. Represents ISO field numbers in
case ISO Messages.
15
INTRF.FLD.LEN
A
Length of the field (Max length in case of ISO)
16
INTRF.FLD.TYPE
A
Field type in case of ISO ex:
GPACK
21
Generic ATM Framework
FIXED,VARIABLE,BITMAP
17
INTRF.FLD.S.M
A
For future use
18
INTRF.FLD.MAND
A
For future use
19
TXN.FIELD.POS
A
This is a multivalve set. ATM.TRANSACTION field
positions are mapped here. Customized hook
routines can be attached here for updating the
fields in ATM.TRANSACTION. Click here for a
sample screenshot.
20
MV.RESERVED
For future use
21
INTRF.POST.RTN
A
This field hold routine name. Routine attached
here should have one argument value passed.
Customized hook routines can be attached here
for post-mapping validations. Click here for a
sample screenshot.
22
LOCAL.REF
A
For future use for local references
23
RESERVED.FIELDS
Reserved fields for future use.
TABLE 1 – INTRF.MESSAGE
DETAILED FIELD DESCRIPTIONS:
FIGURE 1. INTRF.PRE.RTN IN INTRF.MESSAGE
This field can be used for manipulating the Raw ISO message request when it is pushed from listener
into T24. This field triggers the routine before reading the INTRF.MAPPING record. Customized
routine can be attached here with @ before the routine name. Routine should have one argument
value passed inside e.g. AT.FORM.PRE.RTN (ISO.MESSAGE).
Sample Routine is provided as below:
GPACK
22
Generic ATM Framework
Here we can add/amend/delete the incoming ISO Message based on Clients requirement and
proceed further.
GO BACK
FIGURE 2. MAPPING.ID IN INTRF.MESSAGE
This field is a multivalve set. This field holds the formation of INTRF.MAPPING record ID. If a
customized routine is going to be attached here, then @ has to be prefixed with the routine name.
Routine should have one argument value passed inside e.g. AT.FORM.MAPPING.ID (INCOMING,
MAPPING.ID).
Sample Routine is provided below:
A routine can be attached here and INTRF.MAPPING record Id can be formed based on client’s
requirement.
GO BACK
FIGURE 3. TXN.FIELD.POS IN INTRF.MESSAGE
This field is a multivalve set. This field is used for updating particular field in ATM.TRANSACTION
application. The field number which is mentioned in TXN.FIELD.POS or routine attached to it will
process the INTRF.FLD.POS value and update it in the respective field of ATM.TRANSACTION table.
If a customized routine is going to be attached here, then @ has to be prefixed with the routine name.
Routine should have one argument value passed inside e.g. AT.GET.FLD.VALUE.RTN (REQUEST).
Sample Routine is provided below:
GPACK
23
Generic ATM Framework
Here we can attach a routine and directly write the data in respective field of ATM.TRANSACTION.
GO BACK
FIGURE 4. INTRF.POST.RTN IN INTRF.MESSAGE
This field can be used for manipulating the ISO message request after reading the INTRF.MAPPING
record. Customized routine can be attached here with @ before the routine name. Routine should
have one argument value passed inside e.g. AT.POST.RTN (ISO.MESSAGE).
Sample Routine is provided below:
A routine can be attached here for adding/amending/removing the data and send it back to switch.
GO BACK
5.2 INTRF.MAPPING
This is a mapping file, which stores various details like T24 application, user name, password, version
to be used and mapping between each message field to its T24 application field.
GPACK
24
Generic ATM Framework
File Type: H
File Classification: INT
INTRF.MAPPING field description and Population Type
NO
Field Name
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
MSG.TYPE
A
Informative field displays whether the
mapping is for Request, Response or Error
3
PRE.RTN
A
This is a multivalve set. Customized Hook Routine
can be attached here and can be triggered to
perform any additional functionality needed to be
executed within the Transaction. Click here for
sample screenshot.
4
APPLICATION
A
Valid T24 application
5
OFS.FUNCTION
A
Holds the OFS function.
6
OFS.OPERATION
A
Holds the Processing Flag of either PROCESS or
VALIDATE.
7
OFS.UTIL.NAME
A
This field will hold the version name or enquiry
name to be used by OFS.
8
COMP.COD.MODE
A
This field holds the value CUST or ATM.
9
OFS.COM.CODE
A
This field holds routine which loads the Company.
If CUST is selected in above field, then Company
Id is loaded based on customer account. If ATM is
selected, then Company Id is loaded based on
Company code configured in Terminal
10
ID.GEN
A
Will accept Y or N contains information about the
id of the application being updated by OFS.
11
OFS.USER
A
User Sign on to be used by OFS.
12
OFS.PASSWORD
PASSWD
Password of the user entered above.
13
RES.MAP.ID
A
Response mapping id for the request
14
INTRF.FLD.NAME
A
This is a multivalve set. Interface field name (Part
of the message, descriptive) is provided here.
15
INTRF.FLD.PS
A
Position of this field within the message.
16
GLO.FLD.NAME
A
Corresponding T24 application field name given in
OFS Format.
17
GLO.FLD.LN.TYPE
A
Length of the field
GPACK
25
Generic ATM Framework
18
GLO.CONSTANT
A
If the value to be passed to this T24 field is a
constant, data should be entered here.
19
FIELD.SOURCE
A
This field will decide whether the value to be
passed is a constant or a part of the message or
external or routine
20
FIELD.SRC.VALUE
A
This field will hold the routine name if a routine is
specified in FIELD.SOURCE. Customized routines
can be attached here for passing the value to the
GLO.FLD.NAME. Click here for a sample
screenshot.
21
RES.Y.N
A
This field holds the value of Y or N decides
Currently not used. For future use purpose.
22
ERROR.CONV.TAB
A
For future use in error –mapping
23
TYPE.OF.TXN
A
This field holds the value of ENQ or FIN
Decides whether the transaction is Financial or
Enquiry. Mandatory field for non-financial request
mapping record with value as ENQ.
24
TXN.CODE
A
For future use
25
XX.LOCAL.REF
A
For future use for local references
26
RESERVED.FIELDS
Reserved fields for future use.
TABLE 2 – INTRF.MAPPING
DETAILED FIELD DESCRIPTION:
FIGURE 5. PRE.RTN IN INTRF.MAPPING
This is a multivalve set. Customized hook routines can be attached here, which will trigger during the
request phase or response phase based on the Message Type set. Routine should have one
argument value passed inside in case of attaching routine at the response mapping record e.g.
ATM.ISO.ERR.COD.RTN (ISO.MESSAGE).
Sample Scenario:
In Balance Enquiry Request message, above routine formats the balance to be sent in Field
54. Client can attach a new format routine based on his requirement and change the balance format
sent to Field 54. Balance format routine should have two incoming argument and one outgoing
GPACK
26
Generic ATM Framework
argument which contains the balance formatted data as per the client requirement. This routine will be
triggered from No file enquiry routine for balance formation.
Sample Routine is provided below:
In Case of Mini statement Request message, above routine formats the mini statement to be
sent in field 48. Client can attach a new format routine based on his requirement and change the Mini
statement format sent to Field 48. Mini statement format routine should have three incoming argument
and one outgoing argument which contains the mini stamen detail with formatted data as per the client
requirement. This routine will be triggered from No file enquiry routine for mini statement formation.
Sample Routine is provided below:
Note: For Separate/Multiple charges transaction entries, we are using generic routine
AT.POST.CHG.TXN.RTN for raising entries and AT.REV.CHG.TXN.RTN [for reversal mapping
records alone] for reversing entries. These routines have to be attached in PRE.RTN of corresponding
Response Mapping Records. These routines will be triggered based on the parameterization done in
ATM.CHG.TABLE and ATM.SPLIT.CHG.TABLE.
GO BACK
FIGURE 6. FIELD.SRC.VALUE IN INTRF.MAPPING
GPACK
27
Generic ATM Framework
If FIELD.SOURCE is set as RTN, then Routine must be attached in FIELD.SRC.VALUE. The outcome
value of the routine will be assigned to its respective GLO.FLD.NAME value. Routine must have two
arguments passed inside e.g. AT.ISO.CALC.CR.ACCT (INCOMING, OUTGOING).
Sample Scenario:
For Inter Bank Funds transfer, we need Debit and Credit Acct no’s for raising FT Entry.
Below snapshot provides an idea about configuring values for Debit and Credit Account numbers.
If a value from incoming ISO Message is to be passed directly into DEBIT.ACCT.NO, then Intrf Fld Ps
can be set to its respective incoming position (102) and its Field Source can be set as INT.
If a value has to be fetched based on incoming ISO Message positions, then those values can be
placed in Intrf Fld Ps like this: 32*C%*49*C%*103.
32,49 and103 – Represents the incoming ISO Message position
C – Represents the specifying the constant value in the part of incoming value. Generally used to
include the Delimiter value”%” between different value position.
% - it’s the constant value which is used as delimiter.
Field Source should be set as RTN.
Field Src Value should have the Routine name.
Sample Scenario:
If ISO position 32, 49 and 103 has below values
32nd – 123456, 49th – 840, 103 – 43268.
The incoming variable (first argument) will hold the value as “123456%840%43268”. Second argument
will hold the actual account number for the particular T24 OFS field (defined in the Glo Fld Name)
Sample Routine is provided as below:
GPACK
28
Generic ATM Framework
GO BACK
Note: If separate charges are going to be configured in framework, AT.GET.BAL.AFT.TXN has to be
attached in FieldSrc Value and Field Source should be set as RTN for all response mapping records.
If this routine is attached, then account balance after charges will be reflected in the balance field.
For info related to charges, Click Here
5.3 ATM.PARAMETER
This is a mapping file, which stores the various details like the T24 application, user name, password
and version to be used, the mapping between each message field to T24 application field.
File Type: H
File Classification: INT
ATM.PARAMETER field description and Population Type
NO
Field Name
Type
Description
1
BANK.IMD
N
This is a mandatory field which stores the Acquirer
Id for the bank.
2
NETWORK.IMD
A
This is an Optional field which is used to include
the network groups(IMD) in bank own network
(apart from BANK.IMD value).
3
FILE.TYPE
A
Stores the name of the file type used for
processing balances like VISA PROCESS,
BALANCE FILE
4
FILE.NAME
A
This will store the file name that is used to upload
the balances before EOD.
GPACK
29
Generic ATM Framework
5
FILE.PATH
A
This is the path where the balance upload file is to
be stored.
6
DAYS.IN.HIST
Days before the log file are to be archived. User
has to input it as e.g.:+5C.
7
OFS.USER
A
User Sign on to be used by OFS.
8
OFS.PASSWORD
PASSWD
Password of the user entered above.
9
DEF.ATM.BRANCH
N
If Terminal Id was not configured in
ATM.BRANCH, then default Terminal id stored
here will be taken and processed.
10
DEF.ATM.BIN
N
If Other Bank’s Bin was not configured in
ATM.BIN.ACCT, then default bin stored here will
be taken and processed.
11
DEF.POS.MRCNT
N
If any Bank owned POS device id was not
configured in ATM.POS.MERCHANT.ACCT, then
default device id stored here will be taken and
processed.
12
DEF.POS.BIN
N
If Other Bank’s Pos Device Id was not configured
in ATM.POS.BIN.ACCT, then default device id
stored here will be taken and processed.
13
CHG.CCY.POS
N
Currency position for raising charge entries
14
TXN.CCY.POS
N
Transaction currency field position for raising
accounting entries.
15
MSG.ID
A
This is a mandatory field stores the type of ISO
Message format used for validating the incoming
requests. IF 5002 is set, then BASE24 based
Messages can be posted. If 5003 is set, then
standard ISO Messages can be posted. If 5004 is
set, then PHOENIX based messages can be
posted.
16
UNIQUE.ID
A
ISO Message Fields will be stored here. Data from
these fields will be generated as Unique Id for
each transaction.
17
GEN.COM.CODE
A
Default Company Code.
18
LOCK.PERIOD
N
For Authorization request transactions, the lock
period mentioned will be used for locking the
amount. User has to input it as e.g.:+10C.
19
DUAL.TXN.ID
A
ISO Message Fields will be stored here .Unique id
for releasing the locked amount and raising
accounting entry. Customized routine can also be
attached here. Click here for a sample screenshot.
20
CHG.OFS.SOURC
A
OFS SOURCE stored here can be used for raising
charges or can be used in any customized hook
GPACK
30
Generic ATM Framework
routines for raising Separate Transactions.
21
ATM.GEN.MSG.ID
A
This field stores the type of ISO Message skeleton
to be used for initiating ISO Message from T24
host.
22
ATM.GEN.API.ID
A
This field stores java EB.API for connecting to third
party system from T24 host.
23
PHX.BAL.FMT.TYPE**
A
This field used only in PHOENIX Interface. If
ACTUAL is set, then Actual Balance alone will be
sent for all transactions. If AVAILABLE is set, then
Available Balance alone will be sent for all
transactions. If BOTH is set, Actual and Available
balance will be sent for all transactions.
24
LOCAL.REF
For future use for local references
25
RESERVED.FIELDS
Reserved fields for future use.
TABLE 3 – ATM.PARAMETER
FIGURE 7. ATM.PARAMETER
FIGURE 8. DUAL.TXN.ID IN ATM.PARAMETER
This field stores the incoming ISO data position or routine. If customized routine is attached, then the
Unique Dual transaction Id must be generated by the routine, which is used for releasing the locked
amount and raising a transaction. Routine must be prefixed with @ before the routine name. Routine
should have one argument value passed inside e.g. AT.GET.DUAL.TXN.ID (REQUEST).
GPACK
31
Generic ATM Framework
GO BACK
5.4 ATM.BRANCH
This file stores the details like which ATM belongs to which branch and Company in T24. Id of each
record is formed based on the Terminal Id sent in ISO Message.
File Type: H
File Classification: INT
ATM.BRANCH field description and Population Type
NO
Field Name
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
COMPANY.CODE
COM
This field stores the Company Code where the
ATM terminal belongs.
3
DEF.CR.ACCT
A
Default Internal account for dispensing the cash if
USE.DEF.ACCT is set to YES.
4
PROC.CODE
A
Contains different Processing codes, required for
dispensing cash via ATM Terminal.
5
CR.CCY
A
Currency code
6
CR.ACCT
A
Credit account for the specific currency mentioned
above. This Internal account is used if
USE.DEF.ACCT is set to No.
7
USE.DEF.ACCT
A
If set to YES, account stored in DEF.CR.ACCT will
be used. If set to NO, account stored based on
currency will be proceeded.
8
LOCAL.REF
For future use for local references
9
RESERVED.FIELDS
Reserved fields for future use.
TABLE 4 – ATM.BRANCH
GPACK
32
Generic ATM Framework
FIGURE 9. ATM.BRANCH
5.5 ATM.BIN.ACCT
This file stores the details like receivable and payable accounts for visa/master card transactions. Id of
each record is formed based on the Acquirer bin of other banks or first 6 digit of PAN No.
File Type: H
File Classification: INT
ATM.BIN.ACCT field description and Population Type
NO
Field Name
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
DEF.PAY.ACCT
A
This field contains the Internal account. This
account will be processed when USE.DEF.ACCT
is set to Yes and T24 customer goes to other bank
terminal and performs the transaction.
3
DEF.RECV.ACCT
A
This field contains the Internal account. This
account will be processed when USE.DEF.ACCT
is set to Yes and Other bank customer performs
the transaction in T24 Terminal.
4
PROC.CODE
A
This is a multivalve set. Can configure different
processing codes.
5
ACCT.CCY
A
Currency code
6
PAY.ACCT
A
This field contains the Internal account. This
account will be processed when USE.DEF.ACCT
is set to No and T24 customer goes to other bank
terminal and performs the transaction.
7
RECV.ACCT
A
This field contains the Internal account. This
account will be processed when USE.DEF.ACCT
is set to No and Other bank customer performs the
transaction in T24 Terminal.
8
USE.DEF.ACCT
A
If set to YES, account stored in PAY/RECEIVE
account no will be used. If set to NO, account
stored based on currency will be proceeded.
9
LOCAL.REF
For future use for local references
10
RESERVED.FIELDS
Reserved fields for future use.
TABLE 5 – ATM.BIN.ACCT
GPACK
33
Generic ATM Framework
FIGURE 10. ATM.BIN.ACCT
5.6 ATM.UTIL.TABLE
This file stores the details for Utility Payments. Record Id can be based on any incoming data from
ISO Message or a constant name based on client’s requirement.
File Type: H
File Classification: INT
ATM.UTIL.TABLE field description and Population Type
NO
Field Name
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
COMPANY.CODE
COM
This field stores the Company Code where the
ATM terminal belongs.
3
UTIL.CCY
A
Currency code
4
UTIL.ACCT
A
This field contains the Internal account.
5
LOCAL.REF
For future use for local references
6
RESERVED.FIELDS
Reserved fields for future use.
TABLE 6 – ATM.UTIL.TABLE
GPACK
34
Generic ATM Framework
FIGURE 11. ATM.UTIL.TABLE
5.7 ATM.POS.MERCHANT.ACCT
This file stores the details like company code, account for POS based transactions. Id of each record
is formed based on the POS device Id sent in ISO Message.
File Type: H
File Classification: INT
ATM.POS.MERCHANT.ACCT field description and Population Type
NO
Field Name
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
COMPANY.CODE
COM
This field stores the Company Code where the
ATM terminal belongs.
3
DEF.MER.ACCT
A
Default Credit account number will used, if
USE.DEF.ACCT is set to YES.
4
PROC.CODE
Contains different Processing codes, required for
raising entries via POS Devices.
5
ACCT.CCY
A
Currency code
6
MER.ACCT
A
Credit account for the specific currency mentioned
here. This account will be used if USE.DEF.ACCT
is set as NO
7
USE.DEF.ACCT
A
If set to YES, account stored in DEF.CR.ACCT will
be used. If set to NO, account stored based on
currency will be proceeded.
8
LOCAL.REF
For future use for local references
9
RESERVED.FIELDS
Reserved fields for future use.
TABLE 7 – ATM.POS.MERCHANT.ACCT
GPACK
35
Generic ATM Framework
FIGURE 12. ATM.POS.MERCHANT.ACCT
5.8 ATM.POS.BIN.ACCT
This file stores the details like receivable and payable accounts for POS based transactions. Id of
each record is formed based on the Acquirer bin of other banks or first 6 digit of PAN No.
File Type: H
File Classification: INT
ATM.POS.BIN.ACCT field description and Population Type
NO
Field Name
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
DEF.PAY.ACCT
A
This field contains the Internal account. This
account will be processed when USE.DEF.ACCT
is set to Yes and T24 customer goes to other bank
POS and performs the transaction.
3
DEF.RECV.ACCT
A
This field contains the Internal account. This
account will be processed when USE.DEF.ACCT
is set to Yes and Other bank customer performs
the transaction in T24 POS.
4
PROC.CODE
A
This is a multivalve set. Can configure different
processing codes.
5
ACCT.CCY
A
Currency code
6
PAY.ACCT
A
This field contains the Internal account. This
account will be processed when USE.DEF.ACCT
is set to No and T24 customer goes to other bank
POS and performs the transaction.
7
RECV.ACCT
A
This field contains the Internal account. This
account will be processed when USE.DEF.ACCT
GPACK
36
Generic ATM Framework
is set to No and Other bank customer performs the
transaction in T24 POS.
8
USE.DEF.ACCT
A
If set to YES, account stored in PAY/RECEIVE
account no will be used. If set to NO, account
stored based on currency will be proceeded.
9
LOCAL.REF
For future use for local references.
10
RESERVED.FIELDS
Reserved fields for future use.
TABLE 8 – ATM.POS.BIN.ACCT
FIGURE 13. ATM.POS.BIN.ACCT
5.9 ATM.TRANSACTION
This is a live file which stores the details of transactions like FT/ACKL reference number which got
generated, date, transaction amount, credit account, currency and other data’s required for reversing
transactions. ID of each record is formed, based on the Unique ID data got from ISO Message.
File Type: L
File Classification: INT
ATM.TRANSACTION field description and Population Type
NO
Field Name
Type
Description
1
TRANS.REF
A
Unique FT/ACKL Id generated for each transaction
2
COMPANY.CODE
COM
This field stores the Company Code where the
transaction happens
3
VALUE.DATE
D
Stores the transaction Date
GPACK
37
Generic ATM Framework
4
BOOKING.DATE
D
Stores the transaction Date
5
DEBIT.ACCT.NO
A
Stores the debited account no
6
DR.CUSTOMER.ID
A
Stores debited customer account number
7
CREDIT.ACCT.NO
A
Stores Credit account number.
8
TXN.AMOUNT
AMT
Stores the transacted amount.
9
DR.TXN.CODE
A
Stores Debit transaction code
10
CR.TXN.CODE
A
Stores Credit transaction code
11
CHARGE.CODE
A
Stores the charge type
12
CHRG.AMOUNT
AMT
Stores the charged amount
13
CHRG.ACCOUNT
A
Stores the charged account
14
CHRG.CUST.ID
A
Stores the customer no from whom charges is
collected
15
CHRG.CR.ACCT
A
Stores the credit account to which charge amount
is credited
16
CHRG.DR.TXN.CODE
A
Stores the charged Debit transaction code
17
CHRG.CR.TXN.CODE
A
Stores the charged Credit transaction code
18
NARRATIVE
A
Stores the Narrative of the Transaction happened
19
CURRENCY.MARKET
A
Stores the currency market
20
TRANS.STATUS
A
Stores whether the transaction is PROCESSED or
REVERSED or LOCKED.
21
REVERSAL.FLAG
A
Stores ‘YES’ if Transaction is reversed.
22
ORIG.STMT.NOS
A
Stores the STMT Entries rose during the
transaction and update the STMT entries when
raised during the reversal.
23
STMT.NOS
A
Stores the STMT Entries raised during the
transaction.
24
NETWORK.TYPE
A
For future use.
25
BIN.REFERENCE
A
Stores whether the Acquirer bin sent in ISO
Message
26
PAN.NUMBER
A
Stores the PAN Number sent in ISO Message
27
LOCKED.AMOUNT
AMT
Stores the amount locked during Authorization
request.
GPACK
38
Generic ATM Framework
28
LINKED.TRANS
A
For future Use
29
AUTH.CODE
A
Stores the Unique Auth Code generated for each
transaction.
30
RETRIEVAL.REF.NO
A
Stores the Retrieval Reference Number sent in
ISO Message
31
ACQ.OR.ISS
A
Stores whether the Transaction is Acquirer or
Issuance.
32
ATM.OR.POS
A
Stores whether the transaction is happened
through ATM or POS
33
MTI.CODE
A
Stores the MTI of each transaction sent in ISO
Message
34
PROC.CODE
A
Stores the Processing code of each transaction
sent in ISO Message
35
MERCHANT.ID
A
Stores the Merchant Id of each transaction sent in
ISO Message
36
VERSION.NAME
A
Stores the Version and its Application used for
processing the transaction
37
CARD.ACC.ID
A
Stores the Terminal/POS device Id of each
transaction sent in ISO Message
38
CARD.ACC.NAME.LOC
A
Stores the Merchant/Terminal location of each
transaction sent in ISO Message
39
CHRG.TRANS.REF
A
Stores the Unique FT/ACKL Id generated.
40
CHRG.DEBIT.AC
A
Stores the Charges Debit Account No
41
CHRG.CREDIT.AC
A
Stores the Charges Credit Account No
42
CHRG.AMT
AMT
Stores the Charged Amount.
43
CHRG.STMT.NOS
A
Stores the charges STMT entries raised during the
transaction.
44
ERROR.MSG
A
For Future Use.
TABLE 9 – ATM.TRANSACTION
GPACK
39
Generic ATM Framework
FIGURE 14. ATM.TRANSACTION
5.10 ATM.DUAL.TRANSACTION
This is a live file which stores unique id for Authorization request. Id of the record is formed based on
DUAL.TXN.ID provided in ATM.PARAMETER.
File Type: L
File Classification: INT
ATM.DUAL.TRANSACTION field description and Population Type
NO
Field Name
Type
Description
1
ATM.TXN.ID
A
Stores the Unique ID of each transaction
TABLE 10 – ATM.DUAL.TRANSACTION
FIGURE 15. ATM.DUAL.TRANSACTION
5.11 ATM.RES.CODE.TABLE
This file contains the Errors/Overrides and its response codes which has to be triggered, when a
transaction is not successful.
File Type: H
File Classification: INT
GPACK
40
Generic ATM Framework
ATM.RES.CODE.TABLE field description and Population Type
NO
Field Name
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
MESSAGE
A
Contains the Overrides/Errors that occurs in T24
3
RESPONSE.CODE
A
Contains the specific response code for the
4
PASS.RESP.CODE
A
Response code to be sent if a transaction is
Successful
5
FAIL.RESP.CODE
A
Default response code to be sent if a transaction
gets failed
6
LOCAL.REF
For future use for local references.
7
GEN.ERR.MSG
A
Error messages for T24 initiated messages.
8
GEN.RESP.CODE
A
Default response code for T24 initiated messages.
9
RESERVED.FIELDS
Reserved fields for future use.
TABLE 11 – ATM.RES.CODE.TABLE
FIGURE 16. ATM.RES.CODE.TABLE
5.12 ATM.STMT.REQ
This file stores the Statement requests raised each day. Id of this table is Unique Id data got from ISO
Message.
File Type: H
File Classification: INT
GPACK
41
Generic ATM Framework
ATM.STMT.REQ field description and Population Type
NO
Field Name
Type
Description
1
ACCT.NO
A
Customer account no
2
CUSTOMER.ID
A
Contains customer number
3
REQ.DATE
A
Stores the requested date
4
REQ.STATUS
A
Stores whether the requested status is in
REQUEST status or UPDATED status.
5
STMT.PERIOD
A
requested statement period requested
6
LOCAL.REF
For future use for local references.
7
RESERVED.FIELDS
Reserved fields for future use.
TABLE 12 – ATM.STMT.REQ
FIGURE 17. ATM.STMT.REQ
5.13 RAD.LOG.PARAMETER
This file is used for processing the requests and response in a particular file as xml format.
File Type: H
File Classification: INT
RAD.LOG.PARAMETER field description and Population Type
NO
Field Name
Type
Description
1
DESC
A
Description for the table, free field.
2
LOG.TYPE
A
Stores whether the log type is DUMP or LOG4J
3
LOG.LEVEL
A
Stores whether log level is DEBUG or INFO or
WARN or ERROR or FATAL
4
FILE.LISTENER.PATH
A
Stores the file path where the incoming ISO
requests are stored.
GPACK
42
Generic ATM Framework
5
LOCAL.REF
For future use for local references.
6
RESERVED.FIELDS
Reserved fields for future use.
TABLE 13 – RAD.LOG.PARAMETER
FIGURE 18. RAD.LOG.PARAMETER
5.14 ATM.CHG.TABLE
This file is used for raising charges for all transactions. Record ID should be ‘SYSTEM’
File Type: W
File Classification: INT
ATM.CHG.TABLE field description and Population Type
NO
Field Name
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
CHG.CHANNEL
A
Stores the type of charge. ONLINE or PARAM or
RTN.
ONLINE - Amount will be taken from the ISO
Message position defined in CHG.AMT.POSN
field.
PARAM - Amount and other fields has to be
configured for raising entries.
RTN – Routine has to be attached for raising
charges. Click Here for sample screenshot.
3
FLD.POS.RTN
A
If RTN is selected above, then Routine has to be
attached here with @ before the routine name.
Click Here for sample screenshot.
4
CHG.ID.RULE
A
Stores the Charge ID rule. Rule id can be: MTI or
PROC or BIN or MTI.PROC or MTI.PROC.BIN or
MTI.PROC.BIN.CCY
5
CHARGE.DESC
A
Description for the table, free field.
6
SEPARATE.FT
A
YES or NO.
If set to YES. Separate FT can be raised.
If set to NO, data’s provided in the table will be
sent in the Main OFS Request.
7
TRAN.MTI
A
Message Type Indicator of the ISO Message.
GPACK
43
Generic ATM Framework
8
PROC.CODE
A
Processing Code for the ISO Message.
9
BIN.NO
A
BIN No which has to be charged.
10
TXN.CCY
A
Stores the Currency.
11
SPLIT.CHG.ID
A
This field stores the record’s Id which will be
created in ATM.SPLIT.CHG.TABLE
12
CHG.AMT
A
Stores the Amount to be charged.
13
CHG.AMT.POSN
A
Stores the Amount position which is passed in ISO
Message.
14
CHG.PERC
A
Stores the Percentage of amount to be charged.
15
CHARGE.TYPE
A
Stores the Commission type record name.
16
DR.ACCT.TYPE
A
Stores whether the Account type is CUST or IA.
If IA is set, then Charges will be triggered by
routine attached in INTRF.MAPPING. For More
Info, Click Here.
17
CHG.DR.ACCT
A
Stores the Debit Account Number. This field is
mandatory if DR.ACCT.TYPE is set as IA.
18
CHG.CR.ACCT
A
Stores the Credit Account Number.
19
CHG.VERSION
A
Stores the Version used for raising charges.
20
LOCAL.REF
For future use for local references.
21
RESERVED.FIELDS
Reserved fields for future use.
TABLE 15 – ATM.CHG.TABLE
GPACK
44
Generic ATM Framework
FIGURE 19. ATM.CHG.TABLE
DETAILED FIELD DESCRIPTION:
FIGURE 20. FLD.POS.RTN IN ATM.CHG.TABLE
If Online is selected, then the Field having the Charge amount in ISO MESSAGE have to be
configured in ATM.CHG.TABLE
Sample screenshot is provided below
GPACK
45
Generic ATM Framework
If Param is selected, then CHG.RULE.ID has to be configured based on client’s need and charge
amount nor charge percent can be configured there.
Sample screenshot is provided below
If RTN is selected, then Framework will trigger the routine attached in FLD.POS.RTN through
CHECK.REC.RTN field in Version. There should be no arguments passed inside the attached
Routine.
Sample Routine is provided as below:
GPACK
46
Generic ATM Framework
This function doesn’t support split charges or any setup level charges in ATM.CHG.TABLE. If user
wishes to use RTN, then User has to raise all the charges by himself. Framework will just trigger the
routine.
GO BACK
Note: After configuring the charges, the record should be verified using “V” function to update the
concated table ATM.CHG.DETAIL based on the CHG.ID.RULE.
If multiple charges have to be configured, configure all the charges in ATM.SPLIT.CHG.TABLE.
IF SEPARATE.FT is set to YES, then Separate FT will be raised for charges independent of the Main
FT.
5.15 ATM.CHG.DETAIL
This is a LIVE file. The data’s from ATM.CHG.TABLE will be written here based on the CHG.ID.RULE
provided.
File Type: L
File Classification: INT
ATM.CHG.DETAIL field description and Population Type
NO
Field Name
Type
Description
1
CHARGE.DESC
A
Description for the table, free field.
2
SEPARATE.FT
A
YES or NO. If set to YES. Separate FT will be
raised else the data’s provided below will be sent
in the Main OFS Request.
3
TRAN.MTI
A
Message Type Indicator of the ISO Message.
4
PROC.CODE
A
Processing Code for the ISO Message.
5
BIN.NO
A
BIN No which has to be charged.
6
TXN.CCY
A
Stores the Currency.
7
SPLIT.CHG.ID
A
This field stores the record’s Id which will be
created in ATM.SPLIT.CHG.TABLE
8
CHG.AMT
A
Stores the Amount to be charged.
GPACK
47
Generic ATM Framework
9
CHG.AMT.POSN
A
Stores the Amount position which is passed in ISO
Message.
10
CHG.PERC
A
Stores the Percentage of amount to be charged.
11
CHARGE.TYPE
A
Stores the Commission type record name.
12
DR.ACCT.TYPE
A
Stores whether the Account type is CUST or IA.
13
CHG.DR.ACCT
A
Mandatory Field, if DR.ACCT.TYPE is set as IA
Stores the Debit Account Number.
14
CHG.CR.ACCT
A
Mandatory Field. Stores the Credit Account
Number.
15
LOCAL.REF
For future use for local references.
16
RESERVED.FIELDS
Reserved fields for future use.
TABLE 16 – ATM.CHG.DETAIL
FIGURE 21. ATM.CHG.DETAIL
5.16 ATM.SPLIT.CHG.TABLE
This file is used for raising multiple charges entry raised for single transaction. ID would be any free
text.
File Type: H
File Classification: INT
ATM.SPLIT.CHG.TABLE field description and Population Type
NO
Field Name
Type
Description
1
CHARGE.DESC
A
Description for the table, free field.
2
CHARGE.TYPE
A
Stores the Commission type record name.
GPACK
48
Generic ATM Framework
3
CHG.TXN.CCY
A
Stores the Currency.
4
CHG.AMT
A
Stores the Amount to be charged
5
CHG.PERC
A
Stores the Percentage of amount to be charged
6
DR.ACCT.TYPE
A
Stores whether the Account type is CUST or IA.
7
CHG.DR.ACCT
A
Stores the Debit Account Number
8
CHG.CR.ACCT
A
Stores the Credit Account Number
9
LOCAL.REF
For future use for local references.
10
RESERVED.FIELDS
Reserved fields for future use.
TABLE 14 – ATM.SPLIT.CHG.TABLE
FIGURE 22. ATM.SPLIT.CHG.TABLE
Note: The record ID has to be configured in SPLIT.CHG.ID of ATM.CHG.TABLE and SEPERATE.FT
has to be set to ‘YES’. Sample screenshot is provided below
Note: Charges based on Percentage won’t support for Balance Inquiry & Mini statement. Hence
configure the charges as amount for these scenarios in ATM.CHG.TABLE &
ATM.SPLIT.CHG.TABLE.
GPACK
49
Generic ATM Framework
5.17 ATM.GEN.MAPPING
This is a mapping file used for forming ISO Message from T24 side. T24 can initiate an ISO
Message based on the parameters configured in this table.
File Type: H
File Classification: INT
ATM.GEN.MAPPING field description and Population Type
NO
Field Name
Type
Description
1
DESCRIPTION
A
Description for the table, free field.
2
MSG.TYPE
A
Informative field displays whether the
mapping is for Request, Response or Error
3
APPLICATION
A
Valid T24 application
4
OFS.FUNCTION
A
Holds the OFS function.
5
OFS.OPERATION
A
Holds the Processing Flag of either PROCESS or
VALIDATE.
6
OFS.UTIL.NAME
A
This field will hold the version name or enquiry
name to be used by OFS.
7
OFS.COM.CODE
A
This field holds routine which loads the Company.
If CUST is selected in above field, then Company
Id is loaded based on customer account. If ATM is
selected, then Company Id is loaded based on
Company code configured in Terminal
9
ID.GEN
A
Will accept Y or N contains information about the
id of the application being updated by OFS.
9
OFS.USER
A
User Sign on to be used by OFS.
10
OFS.PASSWORD
PASSWD
Password of the user entered above.
11
RES.MAP.ID
A
Response mapping id for the request
12
ERROR.MAP.ID
A
Response mapping id for the request
13
INTRF.FLD.NAME
A
This is a multivalve set. Interface field name (Part
of the message, descriptive) is provided here.
14
INTRF.FLD.PS
A
Position of this field within the message.
15
APPL.FLD.NAME
A
Corresponding T24 application field name
16
GLO.FLD.NAME
A
Corresponding T24 application field name given in
OFS Format
GPACK
50
Generic ATM Framework
17
GLO.FLD.LN.TYPE
A
Length of the field
18
GLO.CONSTANT
A
If the value to be passed to this T24 field is a
constant, data should be entered here.
19
FIELD.SOURCE
A
This field will decide whether the value to be
passed is a constant or a part of the message or
external or routine
20
FIELD.SRC.VALUE
A
This field will hold the routine name if a routine is
specified in FIELD.SOURCE. Customized routines
can be attached here for passing the value to the
GLO.FLD.NAME. Click here for a sample
screenshot.
21
RES.Y.N
A
This field holds the value of Y or N decides
Whether this message type has a valid response.
Not Used.
22
ERROR.CONV.TAB
A
For future use in error –mapping
23
TYPE.OF.TXN
A
This field holds the value of ENQ or FIN
decides whether the transaction is Financial or
Enquiry
24
TXN.CODE
A
For future use
25
XX.LOCAL.REF
A
For future use for local references
26
RESERVED.FIELDS
Reserved fields for future use.
TABLE 17 – ATM.GEN.MAPPING
FIGURE 23. ATM.GEN.MAPPING
GPACK
51
Generic ATM Framework
Sample Scenario:
AT.ISO.GEN.MSG is a generic routine used for forming ISO Message from T24 end, based on the
configuration done in ATM.GEN.MAPPING table. This routine has to be attached as Input routine in
the Version which client creates for his requirement.
Sample Version has been shown as below:
Customized routines can be attached based on clients needs. Configuring customized routines is
similar to attaching the routines in INTRF.MAPPING. Click here for More Info.
Note: ATM.GEN.MAP.ID is the LOCAL REF Field which is used for providing Third party based
Mapping ID’s. Client can configure this Field in AUTO NEW CONTENT or can attach routines in the
version to form the Request Id based on his needs.
5.18 VERSIONS
Versions which are currently used in ATM Interface
VERSION>FUNDS.TRANSFER,ATM
VERSION>FUNDS.TRANSFER,ATM.FP
VERSION>FUNDS.TRANSFER,ATM.AC
VERSION>FUNDS.TRANSFER,ATM.AC.FP
VERSION>AC.LOCKED.EVENTS,ATM
VERSION>FUNDS.TRANSFER,ATM.POS
VERSION>FUNDS.TRANSFER,ATM.POS.FP
VERSION>FUNDS.TRANSFER,ATM.CD
VERSION>FUNDS.TRANSFER,ATM.CD.FP
VERSION>CHEQUE.ISSUE,ATM
VERSION>FUNDS.TRANSFER,ATM.CHQ
VERSION>FUNDS.TRANSFER,ATM.CHQ.FP
GPACK
52
Generic ATM Framework
VERSION>ATM.STMT.REQ,ATM
VERSION>FUNDS.TRANSFER,ATM.CHG
VERSION>FUNDS.TRANSFER,ATM.UTIL.FP
VERSION>FUNDS.TRANSFER,ATM.UTIL
VERSION>FUNDS.TRANSFER,REV.WD
VERSION>AC.LOCKED.EVENTS,ATM.FP
VERSION>AC.LOCKED.EVENTS,ATM.CW
VERSION>AC.LOCKED.EVENTS,ATM.CW.FP
VERSION>AC.LOCKED.EVENTS,ATM.FP
VERSION>AC.LOCKED.EVENTS,REV.WD
5.19 ENQUIRES
Enquires which are currently used in ATM Interface.
ENQ.NOFILE.SPF
E.ISO.ATM.BAL.ENQ
E.ISO.ATM.MINI.STMT
5.20 SERVICES
ATM Interface has provided a service which helps in taking backup of ATM.TRANSACTION
table. This BNK/ATM.TXNS.ARCHIVE service archives the records to history based on the DAYS
provided in ATM.PARAMETER TABLE.
5.21 LOCAL REFERENCE FIELDS
AT.UNIQUE.ID:
This field is used for storing the Unique ID for each transactions obtained from ISO Message
E.g.: 11*7: value of ISO Field 11 and Value of ISO Field 7 will be stored here.
BAL.AFT.TXN:
This field is used for storing the working & available balance for all transactions. Refer #Field 54 for
more details.
AT.AUTH.CODE:
This field is used for storing unique code generated by T24 for populating in ISO Response for each
transaction.
ATM.GEN.MAP.ID:
This field is used for storing the Mapping ID’s used for generating the ISO Message from T24 Host.
GPACK
53
Generic ATM Framework
Note: Above four Fields have to be attached in LOCAL.REFERENCE.FIELD of FUNDS.TRANSFER,
AC.LOCKED.EVENTS & CHEQUE.ISSUE. ATM.GEN.MAP.ID & AT.UNIQUE.ID has to be attached in
TELLER as shown below:
TELLER
FUNDS.TRANSFER
AC.LOCKED.EVENTS
CHEQUE.ISSUE
5.22 Main Subroutines Descriptions
AT.CALC.AVAIL.BALANCE
This routine is used to provide the balance of each account
This routine will calculate the balances based in the locked amount and transaction
amount i.e. WORK.BAL - LOCKED.AMT - TXN.AMT
AT.FMT.TXN.AMT
This routine is attached in version of all transactions
GPACK
54
Generic ATM Framework
This routine will format the amount based on the decimals in the currency table.
AT.GEN.ISO.REQ.MSG
This routine is used to initiate an ISO Message
This routine will generate the ISO request message based on the mapping file defined in
the request ATM.GEN.MAPPING record
AT.GEN.ISO.RES.MSG
This routine will convert the ISO request message and parse the message based on the
mapping file defined in the request ATM.GEN.MAPPING record
AT.GET.CHEQUE.ISSUE.ID
This routine forms the record id for CHEQUE.ISSUE application.
This routine validates if the account category is present in CHEQUE.TYPE. If present,
based on this Cheque ID is formed.
AT.GET.ISO.FLD.VALUE
This routine fetches the Incoming ISO Message values based on the ISO field positions
sent in IN argument. OUT argument contains the record data’s.
AT.GET.STMT.ID
This routine is used to form Record Id for ATM.STMT.REQ application
AT.ISO.CALC.CR.ACCT
This routine is used to fetch the Credit account no for ATM based transactions.
If it’s our bank transaction, based on BANK IMD and Terminal ID, credit account no will be
fetched.
If it’s another bank transaction, based on BANK IMD, Credit account no will be fetched
from ATM.BIN.ACCT Table.
If no Terminal id or ATM.BIN.ACCT is configured, then default Branch or BIN configured in
ATM.PARAMETER will be fetched.
AT.ISO.CALC.DR.ACCT
This routine is used to fetch the Debit account no for ATM based transactions.
This routine picks the debit account no for LORO transactions.
When other bank customer does a transaction, Debit account number will be picked from
ATM.BIN.ACCT based on the PAN NO.
AT.ISO.CALC.UTIL.ACCT
This routine is used to fetch the Credit account no for UTILITY BILL PAYMENTS
GPACK
55
Generic ATM Framework
AT.ISO.FMT.BAL.RTN
This routine is used to form Balances for all transaction.
Ledger and available balances are calculated here.
AT.ISO.GEN.MSG
This routine is attached in VERSION of any TT or FT to trigger CALLJ
This routine is used only when T24 has to initiate an ISO Message.
This routine will validate the message received from third party system
AT.ISO.MINI.FMT.RTN
This routine is used to form the MINI statement entries.
AT.ISO.REV
This routine is used in full reversal and partial reversal.
This routine will decide whether the transaction has to be reversed or initiated.
This routine checks if there is any original transaction present in ATM.TRANSACTION.
If original transaction is present then it will reverse the transaction
If original transaction is present and partial amount is sent, then it initiates a new
transaction
AT.ISO.PRE.PROCESS.MSG
This routine will convert the ISO request message to OFS request message which will be
posted through OFS SOURCE based on the mapping file defined in the request
INTRF.MAPPING record.
AT.ISO.POST.PROCESS.MSG
This routine will convert the OFS response to ISO response based on the Response mapping
configured in the INTRF.MAPPING
AT.PHX.CHECK.MSG.RTN
This routine will check if the incoming message is a Network message or a transaction
message
This routine will load the INTRF.MESSAGE skeleton based on the ISO MESSAGE
AT.POS.CREDIT.ACCT.NO
This routine is used to fetch the Credit account no for POS based transactions.
If it’s our bank transaction, based on BANK IMD and POS device ID, Merchant account no
will be fetched from ATM.POS.MERCHANT.ACCT.
If it’s another bank transaction, based on BANK IMD, Credit account no will be fetched
from ATM.POS.BIN.ACCT Table.
If no POS id or ATM.POS.BIN.ACCT is configured, then default POS or BIN configured in
ATM.PARAMETER will be fetched.
GPACK
56
Generic ATM Framework
AT.POS.DEBIT.ACCT.NO
This routine is used to fetch the Debit account no for POS based transactions.
This routine picks the debit account no for LORO transactions.
When other bank customer does a transaction, Debit account number will be picked from
ATM.POS.BIN.ACCT based on the PAN NO.
AT.POST.CHG.TXN.RTN
This routine is used for raising separate charges.
This routine will check if the charges are configured in ATM.CHG.TABLE or
ATM.SPLIT.CHG.TABLE
Based on the configurations, this routine will trigger raise a separate transaction
Once the transaction is raised, ATM.TRANSACTION table is updated automatically.
AT.REV.CHG.TXN.RTN
This routine is used to reverse charges raised.
This routine will check if the charges are raised from ATM.TRANSACTION table
If charges are raised, then these charges are reversed and ATM.TRANSACTION table is
updated with reversal status.
ATM.CHK.POST.RESTRICT
This routine is used to check if there is any posting restrict is present
This routine is attached to INTRF.MAPPING record for NON Financial transactions.
ATM.COMP.SELECT
This routine is used to get the company and financial mnemonic of the Account number
coming in ISO message
ATM.ISO.ERR.CODE.RTN
This routine is used to check the error code of the particular transaction.
This routine will be triggered in OUT.MSG routine.
This routine will check if FT is transaction is successful. If its successful, then success
response code is sent through the ISO Message
If the transaction is failed, then based on the error code mapped in ATM.RES.CODE.TABLE,
the error response code will be sent through ISO Message
ATM.TXNS.ARCHIVE.RTN
This routine is used to archive the transactions from ATM.TRANSACTION to its history table
based on the days mentioned in ATM.PARAMETER
GPACK
57
Generic ATM Framework
ATM.UPD.TXN.LOG.RTN
This routine is used for logging the entries into ATM.TRANSACTION.
This routine will update the table for all financial and non-financial transactions.
CAL.COMPANY.CDE
This routine is used to trigger the company code based on the account number or terminal id
sent from ISO Message
E.ISO.ATM.BAL.ENQ.BLD.RTN
This is an Enquiry routine which generates the balance message.
E.ISO.ATM.MINI.STMT.BLD.RTN
This is an Enquiry routine which generates the Mini Statement message.
E.ISO.RET.SPF.STATUS
This enquiry routine is used for Network Messages
This routine is used to check if the SYSTEM is on online and send the success response code
back
V.ACLK.CALC.TO.DATE
This routine will check the LOCK Period from ATM.PARAMETER and lock the amount for
AC.LOCKED.EVENTS
V.ACLK.REV.UPD.ATM.KEY.ID
This routine will update the ATM.TRANSACTION table, if reversal or partial reversal is
successfully raised for AC.LOCKED.EVENTS.
V.ACLK.UPD.ATM.KEY.ID
This routine will update the ATM.TRANSACTION table, if AC.LOCKED.EVENTS transaction
is successfully raised for AC.LOCKED.EVENTS.
V.ATM.CHK.POST.RESTRICT
This routine will check if there is any posting restricts
This routine has to be attached only for ATM.STMT.REQ and CHEQUE.ISSUE applications
V.ATM.GET.CHG.TYPE
This routine is used for charges.
This routine will check if charges have to be raised with the Main FT.
If so, then the charge code and charge amount will be passed with the main FT
GPACK
58
Generic ATM Framework
V.BAL.DUP.CHECK
This routine is used to check if the transaction is a duplicate of the existing transaction
If so, then error will be triggered preventing rising of a new entry
V.CHG.FT.UPD.ATM.KEY.ID
This routine is attached to charges version.
This routine will update the ATM.TRANSACATION with the charges details.
V.CHQ.ATM.KEY.ID
This routine is attached to CHEQUE.ISSUE version
This routine will update the balance returned and Auth code for the cheque ISO Message
V.FT.REV.UPD.ATM.KEY.ID
This routine will update the ATM.TRANSACTION table, if reversal or partial reversal is
successfully raised for FUNDS.TRANSFER.
V.FT.UNBLK.ACCT
This routine is used to release the Locked amount.
This routine will check the ATM.DUAL.TRANSCATION table and fetch the Reversal ID.
Then based on the reversal id, ATM.TRANSCATION recorded is opened and LOCKED
AMOUNT is fetched, then the locked amount is released here
V.FT.UPD.ATM.KEY.ID
This routine is used to update the ATM.TRANSACTION table, if transaction is successfully
raised for FUNDS.TRANSFER
GPACK
59
Generic ATM Framework
6. Transaction Message Format
6.1 Base24/ISO Transaction Message
6.1.1 Message Header
A 4-byte ASCII or 2-byte message header containing the length of the message has to be sent at the
beginning of the message. The message length would exclude the length of the header.
Example:
Four Byte Header:
If the ISO message is 323 bytes, “0323” has to be added in front of the message. Therefore, the actual
data sent is 327 bytes.
Two Byte Header:
If the ISO message is 323 bytes, these bytes “SOH C” [printed char format] has to be added in front of
the message. Therefore, the actual data sent is 325 bytes
Note: Configuration of 2 byte or 4 byte has to be done at Application Server level.
6.1.2 Bitmap Message Format
A system that communicates with ATM Interface must construct messages according to ISO 8583
standards. Messages constructed as such have three main Components:
Message type identifier
Primary & Secondary bitmaps
Series of data elements
Message Type Indicator
Bit Map
Data Elements
6.1.2.1 Message type identifier
The message type identifier is a 4-digit numeric field with the following sub-fields:
First 2 digits are the Message class
Last 2 digits are the Message function
An example of a message type identifier for a financial request transaction sent to the ATM Interface is:
'0200'.
6.1.2.2 Bitmaps
Primary Bitmap
Format b-64
Length 16 bytes
Description
The primary bitmap is required in all messages. It determines which data elements are present. The
bits are interpreted from left to right where a 1 indicates the field in that bit position is present and a 0
indicates the absence of that field.
Secondary Bitmap
Format b-64
Length 16 bytes
Description
The secondary bitmap is present only if data elements 65-128 are present in the message. The
secondary bitmap has the same description as the primary bitmap.
Note: For T24 ATM Interface Primary & secondary bitmaps are mandatory.
GPACK
60
Generic ATM Framework
6.1.2.3 Data Elements Definitions
Field #2: Primary Account Number (PAN)
Format n...19, LLNUM
Description
This field contains the primary account number (PAN) as represented on the consumer's Card. This
field is used for all account numbers up to 19 digits in length.
Field #3: Processing Code
Format n-6
Length 6 bytes
Description
This field is required in all 01xx, 02xx, 04xx, 06xx, 08xx, 7xxx and 9xxx messages.
• A two digit process code
• A two digit from account
• A two digit to account
Current Transactions supported in T24 are:
Transaction Type
Message Type [ISO 8583:87/93]
Processing Code
Purchase
0100/0200/0220/0420
1100/1200/1220/1420
00xx00
Withdrawal
0100/0200/0220/0420
1100/1200/1220/1420
01xx00
Fund Transfer
0200/0220/0420
1200/1220/1420
40xxyy
Balance Inquiry
0200
1200
30xx00
Mini Statement
0200
1200
38xx00
Cash Deposit
0200/0220/0420
1200/1220/1420
21xx00
Cheque Deposit
0200/0220/0420
1200/1220/1420
24xx00
Statement Request
0200/0220
1200/1220
35xx00
Cheque Issue
0200/0220
1200/1220
91xx00
Utility Bill Payment
0200/0220/0420
50xx00
GPACK
61
Generic ATM Framework
1200/1220/1420
Network Message
0800
1800
-NA-
Valid values for xx and yy can be:
00 – Default account
10 – Savings account
20 – Current account
30 – Credit account
Field #4: Transaction Amount
Format n-12
Length 12 bytes
Description
This field represents the transaction amount in the currency of the acquirer. The field always
represents the original transaction amount.
Representation
The amount field is zero filled and right justified. The decimal places are implied.
Example
To represent the amount US$ 4,901.63 use 000000490163.
Field #5: Settlement Amount
Format n-12
Length 12 bytes
Description
This field represents the amount for which the transaction will be settled in the settlement currency.
Representation
The amount field is zero filled and right justified. The decimal places are implied.
Example
To represent US$ 861.63 use 000000086163.
Field #6: Equivalent Amount (Cardholder Billing)
Format n-12
Length 12 bytes
Description
In cases where a transaction takes place in a currency other than the cardholder's currency, this field
represents the amount billed to the cardholder in the currency of the cardholder's account, exclusive of
cardholder billing fees. It is the representation of the purchase amount converted from the currency of
the acquiring country to the cardholder's billing currency.
Representation
The equivalent amount field is zero filled and right justified. The decimal places are implied.
Example
To represent US$ 423.92 use 000000042392.
Field #7: Transmission Date and Time
Format n-10, MMDDhhmmss
Length 10 bytes
Description
GPACK
62
Generic ATM Framework
This data element is required in all IST/Switch messages. It represents the date and time, in UTC
format, at which the transaction first entered the EFT (electronic funds transfer) network. Once set,
this field remains unchanged for the life of the transaction.
Representation
MM Month indicator
DD Day of month
hh 24 Hour clock (00-23)
mm Minutes
ss Seconds
Example
To express May 6, 2:30.376 p.m. use 0506143037.
Field #9 – Conversion rate, Settlement
Format n-8
Length 8 bytes
Description
The factor used in the conversion from amount, transaction to amount, settlement. The amount,
transaction is multiplied by this field to yield the amount, settlement. The leftmost digit denotes the
number of positions the decimal separator shall be moved from the right. Positions 2 to 8 of the field
represent the actual rate.
Example
Conversion rate value of 91234567 would equate to 0,001234567.
Field #10: Conversion Rate (Cardholder Billing)
Format n-8
Length 8 bytes
Description
In cases where a transaction takes place in a currency other than the cardholder's billing currency, this
field represents the rate used to make a conversion from the transaction amount in the acquiring
institution's currency to the currency of the cardholder's account.
Representation
This field is expressed as xnnnnnnn, where x is a number between 0 and 7 which indicates the
number of positions that the decimal separator will be moved from the right.
Example
The number 67123890 is interpreted as 7.123890.
Field #11: System Trace
Format n-6
Length 6 bytes
Description
It is a unique number.
Representation
This field is zero filled and right justified.
Field #12: Local Transaction Time
Format n-6, hhmmss
Length 6 bytes
Description
This field represents the local time at the terminal when the transaction occurred.
Representation
hh Hour of day in a 24 hour clock. mm Minute within the hour.ss Seconds past the minute
Example
To represent 5:14.53 p.m. use 171453.
GPACK
63
Generic ATM Framework
Field #13: Local Transaction Date
Format n-4, MMDD
Length 4 bytes
Description
This field represents the local date at the terminal when the transaction occurred.
Representation
MM Month 01 to 12
DD Day of month 01-31
Example
To represent March 18 use 0318.
Field #15: Settlement Date
Format n-4, MMDD
Length 4 bytes
Description
The month and day for which financial totals are reconciled between the acquirer and the issuer.
Example
To represent a settlement date of April 12 use 0412.
Field #18: Merchant Type
Format n-4
Length 4 bytes
Description
This field is used to represent the type of merchant generating the request.
Representation
This field is zero filled and right justified.
Example
To represent a merchant type of 6011 (this is an ATM) use 6011.
Field #19: Acquiring Institution Country Code
Format n-3
Length Three bytes
Description
This field contains the code of the country where the acquiring institution is located. This is the
financial organization that is responsible for the merchant or the ATM.
Field #22: Point-of-Service Entry Mode
Format n-3
Length 3 bytes
Description
This field indicates the method by which the PAN was captured as well as the terminals PIN entry
capabilities.
Field #25: Point-of-Service Condition Code
Format n-2
Length 2 bytes
Description
This field is used to indicate the condition under which the transaction occurred.
Field #26: Point-of-Service PIN Capture Code
Format n-2
GPACK
64
Generic ATM Framework
Length 2 bytes
Description
This field represents a code used to indicate the maximum number of PIN characters accepted by the
point-of-service device used to construct the personal identification number (PIN) data. The field must
contain the actual number of PIN characters if they are less than 4 or more than 12.
Field #28: Amount, Transaction fee
Format n-8
Length 8 bytes
Description
A fee charged, by the acquirer to the issuer, for transaction activity, in the currency of the amount
transaction.
Field #29: Amount, settlement fee
Format n-8
Length 8 bytes
Description
A fee charged, by the acquirer to the issuer, for transaction activity, in the currency of the amount
settlement.
Field #32: Acquiring Institution Code
Format n...11, LLNUM
Length 2 byte length, 1...11 digits following
Description
It indicates the acquiring institution identifier.
Representation
This field contains a 2 byte length which is zero filled and right justified. This length is followed by up to
11 digits.
Example
To represent the identifier 46910 use 0546910.
Field #33: Forwarding Institution Code
Format n...11, LLNUM
Length 2 byte length followed by up to 11 digits
Description
A code identifying the institution that forwards the transaction in an interchange system en route to the
card issuer.
Representation
This field contains a 2 byte length which is zero filled and right justified followed by up to 10 digits.
Example
To represent 987 use 03987.
Field #35: Track-2 Data
Format z...37, LLVAR
Length 2 byte length followed by up to 37 bytes
Description
This field contains the track2 data as captured by the device.
Field #37: Retrieval Reference Number
Format an-12
Length 12 bytes
Description
GPACK
65
Generic ATM Framework
A reference number supplied by the system retaining the original source information and used to
assist in locating that information or a copy thereof.
Field #38: Authorization Number
Format an-6
Length 6 bytes
Description
This field is required for all authorized transactions.
Field #39: Response Code
Format an-2
Length 2 bytes
Description
This field is required in all response messages and is used to indicate if the transaction was approved
or if it failed.
Response Code Definition
00 Transaction Approved
05 Unable to process
76 Invalid accounts [Balance Enquiry & Mini statement]
Note: Further Response codes with their errors can be configured in ATM.RES.COD.TABLE
Field #41: Card Acceptor Terminal Identification
Format ans-8
Length 8 bytes
Description
This field is used to identify a terminal at the bank. It should be unique within that bank.
Representation
This field contains 8 bytes of alphanumeric and special characters.
Field #42: Card Acceptor Identification Code
Format ans-15
Length 15 bytes
Description
The value in this field is network dependent.
Representation
This field contains 15 bytes of alphanumeric and special characters.
Field #43: Card Acceptor Name/Location
Format ans-40
Length 40 bytes
Description
This field is used for the customer name and location.
Field #44: Additional Response Data
Format an...25, LLVAR
Length 2 byte length followed by up to 25 bytes data
Description
This field is defined as a private data field.
Field #45: Track-1 Data
Format z...76, LLVAR
GPACK
66
Generic ATM Framework
Length 2 byte length followed by up to 76 bytes data
Description
This field contains the track1 data as read from the card stripe by the terminal.
Field #48: Additional Data
Format an ...999, LLLCHAR
Length 3 bytes followed by up to 999 bytes of data
Description
Bitmap 48 contains the STMT entries for Mini statement Transaction. For other transactions this field
will be null field.
Subfield
Position
Format
Definition
1
1-6
n-10
Date (in YYMMDD format)
2
7-9
n-3
Numeric Currency
3
10
X
Debit/Credit indicator(D/C)
4
11-22
n-12
Transaction Amount
Example
120126840D000000002500120126840D000000002500120126840D000000002500
Field #49: Transaction Currency Code
Format n-3
Length 3 bytes
Description
This is a required field in all messages. It defines the currency code for Field 4 (transaction amount).
Representation
This field is composed of 3 digits, zero filled and right justified.
Example
To represent the code for US currency, use 840.
Field #50: Currency Code, Settlement
Format an-3
Length 3 bytes
Description
This is a code which identifies the currency used for settlement.
Field #51: Currency Code, Cardholder Billing
Format n-3
Length 3 bytes
Description
This field is a required field when the currency in which the transaction took place is not the same as
the cardholder billing currency.
Representation
This field is composed of 3 digits, zero filled and right justified.
Example
To represent the code for US currency, use 840.
GPACK
67
Generic ATM Framework
Field #54: Additional Amounts
Format an...120, LLLVAR
Length 3 byte length followed by up to 120 digits
Description
This field indicates additional amounts for all transactions.
Representation
This field contains a 3 byte length field which denotes the total field length followed by up to two
balance subfields. Each subfield is 20 bytes in total. . The total length is 43 bytes.
Subfield
Position
Format
Definition
1
1-2
n-2
Ledger account type
2
3-4
n-2
Ledger amount type
3
5-7
n-3
Numeric currency
4
8
X
Debit/Credit indicator(D/C)
5
9-20
n-12
Ledger Balance
6
21-22
n-2
Working account type
7
23-24
n-2
Working amount type
8
25-27
n-3
Numeric currency
9
28
X
Debit/Credit indicator(D/C)
10
29-40
n-12
Working Balance
Example
To represent an available balance
1001840C0000000010981002840C000000001098.
Field #60: Terminal Totals
Format an...999, LLVAR
Length 2 byte length followed by up to 999 bytes data
Description
This field is a private data field.
Field #63: Reversal Reason Code
Format an...999, LLVAR
Length 2 byte length followed by up to 999 bytes data
Description
This field is a private data field.
Field #70: Network Management Information
Format n-3
Length 3 bytes
Description
This field is required in all 08xx messages. It indicates the type of network request to be processed.
The following table lists the available codes.
GPACK
68
Generic ATM Framework
Representation
This field is a numeric zero filled fields which is right justified.
Value Meaning
001 Sign on
002 Signoff
301 Echo test
Field #74: Credits, Number
Format n-10
Length 1 byte per digit
Description
This field contains the total number of credit transactions processed.
Field #75: Credits, Reversal Number
Format n-10
Length 1 byte per digit
Description
This field contains the total number of reversal credit transactions.
Field #76: Debits, Number
Format n-10
Length 1 byte per digit
Description
This field contains the total number of debit transactions processed.
Field #77: Debits, Reversal Number
Format n-10
Length 1 byte per digit
Description
This field contains the total number of reversal debit transactions.
Field #78: Transfers, Number
Format n-10
Length 1 byte per digit
Description
This field contains the total number of all transfer transactions processed.
Field #79: Transfers, Reversal Number
Format n-10
Length 1 byte per digit
Description
This mandatory field is used to contain the total number of all reversal transfer transactions processed.
Field #80: Inquiries, Number
Format n-10
Length 1 byte per digit
Description
This field contains the total number of inquiry requests processed.
GPACK
69
Generic ATM Framework
Field #81: Authorizations, Number
Format n-10
Length 1 byte per digit
Description
This field contains the total number of authorization requests and authorization advice messages
processed.
Field #82: Credits, Processing Fee Amount
Format n-12
Length 1 byte per number
Description
This field contains the total amount of processing fees due from the acquirer.
Field #83: Credits, Transaction Fee Amount
Format n-12
Length 1 byte per number
Description
This field contains the total amount of transaction fees due from the acquirer.
Field #84: Debits, Processing Fee Amount
Format n-12
Length 1 byte per number
Description
This field contains the total amount of processing fees due from the acquirer.
Field #85: Debit, Transaction Fee Amount
Format n-12
Length 1 byte per number
Description
The sum amount of all fees resulting from the processing of all debit transactions.
Field #86: Credits, Amount
Format n-16
Length 1 byte per digit
Description
This field contains the total number of all acquirer credit transactions processed exclusive of any fees.
Field #87: Credits, Reversal Amount
Format n-16
Length 1 byte per digit
Description
This field contains the sum amount of all acquirer reversal credit transactions processed exclusive of
any fees.
Field #88: Debits, Amount
Format n-16
Length 1 byte per digit
Description
This field is mandatory and contains the sum amount of all debit transactions processed exclusive of
any fees.
GPACK
70
Generic ATM Framework
Field #89: Debits, Reversal Amount
Format n-16
Length 1 byte per digit
Description
This field is mandatory and contains the sum amount of all debit transactions processed exclusive of
any fees.
Field #90: Original Data Elements
Format n-42
Length 42 bytes
Description
This field is required in all 04xx messages. It contains the data elements found in the original
message, intended to identify a transaction for correction or reversal.
Representation
There are five subfields within the message:
Description Type
Original message type identifier n-4 [MTI]
Original trace number n-6 [Field 11]
Original transmission time and date n-10 [Field 7]
Original acquiring institution identification code n-11 [Field 32]
Forward institution identification code n-11 [Field 33]
Example
020061432511121212910000049867500000267098
Note: These data comes in field 56 of ISO Message for ISO8583:93 version
Field #95: Replacement Amounts
Format n-42
Length 42 bytes
Description
This field contains the new actual amount data elements necessary to perform a partial or full reversal
on a financial transaction.
Field #97: Amount, Net Settlement
Format n-17
Length Fixed 17 bytes
Description
This field contains the net value of all gross amounts.
Field #99: Settlement Institution Identification Code
Format n-11, LLNUM
Length 1 byte per number
Description
This field contains the ID of the acquirer or acquirer’s settlement agent.net value of all gross amounts.
Field #100: Receiving Institution Identification Code
Format n-11, LLNUM
Length 1 byte per number
Description
This field contains the ID of the receiving institution, if different from that identified by the Primary
Account Number (PAN).
Field #102: From Account Number
Format ans...28, LLVAR
GPACK
71
Generic ATM Framework
Length 2 byte length followed by up to 28 bytes
Description
This field is used to contain from account as entered by the user at the ATM. Alternatively, this field
can be used to return a from account number by the host.
Field #103: To Account Number
Format ans...28, LLVAR
Length 2 byte length followed by up to 28 bytes
Description
This field is used to contain to account as entered by the user at the ATM. Alternatively, this field can
be used to return to account number by the host.
Field #127: For Private Use
Format ans 999, LLLVAR
Length alphanumeric and special characters, variable length field to a maximum of 999 bytes.
Description
This field is a private reserved field, commonly used by switches for their internal purposes.
Representation
User defined system value.
Note: Data sent here is Echo backed by T24.
Field #128: MAC
Format ans 999, LLLVAR
Length alphanumeric and special characters, variable length field to a maximum of 999 bytes.
Description
Message Authentication Code (MAC) field, used to store the encrypted form of the key that is used to
encrypt the data in the PIN field.
Representation
User defined system value.
6.2 PHOENIX Transaction Message
These Messages are used for Phoenix Interface, which has fixed Message length. These messages
can have any header values configured by Switch vendor.
6.2.1 Message type identifier
The message type identifier is a 4-digit numeric field with the following sub-fields:
First 2 digits are the Message class
Last 2 digits are the Message function
An example of a message type identifier for a financial request transaction sent to the ATM Interface is:
'0200'.
6.2.2 Data Elements Definitions
Field #1: Customer Identification Number
Format n...20
Description
This field contains the Customer Identification number is a unique number, which uniquely identifies
the customer within the bank.
Representation
This field is Left justified and padded with spaces.
GPACK
72
Generic ATM Framework
Field #2: Primary Account Number (PAN)
Format n...20
Description
This field contains the primary account number (PAN) as represented on the consumer's Card. This
field is used for all account numbers up to 20 digits in length.
Representation
This field is Left justified and padded with spaces.
Field #3: Processing Code
Format n-6
Length 6 bytes
Description
This field is required in all 01xx, 02xx, 04xx, 06xx, 08xx, 7xxx and 9xxx messages.
• A two digit process code
• A two digit from account
• A two digit to account
Current Phoenix Transactions supported in T24 are:
Transaction Type
Message Type
Processing Code
Purchase
0200/0420/0205/0206
00xx00
Withdrawal
0200/0420/0205/0206
01xx00
Fund Transfer
0200/0420
40xxyy
Balance Inquiry
0200
30xx00
Mini Statement
0200
53xx00
Network Message
0800
-NA-
Valid values for xx and yy can be:
00 – Default account
10 – Savings account
20 – Current account
30 – Credit account
Field #4: Transaction Amount
Format n-12
Length 12 bytes
Description
This field represents the transaction amount in the currency of the acquirer. The field always
represents the original transaction amount.
Representation
The amount field is zero filled and right justified. The decimal places are implied.
Example
To represent the amount US$ 4,901.63 use 000000490163.
GPACK
73
Generic ATM Framework
Field #5: Settlement Amount
Format n-12
Length 12 bytes
Description
This field represents the amount for which the transaction will be settled in the settlement currency.
Representation
The amount field is zero filled and right justified. The decimal places are implied.
Field #6: Equivalent Amount (Cardholder Billing)
Format n-12
Length 12 bytes
Description
In cases where a transaction takes place in a currency other than the cardholder's currency, this field
represents the amount billed to the cardholder in the currency of the cardholder's account, exclusive of
cardholder billing fees. It is the representation of the purchase amount converted from the currency of
the acquiring country to the cardholder's billing currency.
Representation
The equivalent amount field is zero filled and right justified. The decimal places are implied.
Field #7: Transmission Date and Time
Format n-10, MMDDhhmmss
Length 10 bytes
Description
This data element is required in all IST/Switch messages. It represents the date and time, in UTC
format, at which the transaction first entered the EFT (electronic funds transfer) network. Once set,
this field remains unchanged for the life of the transaction.
Field #8 – Conversion rate, Settlement
Format n-8
Length 8 bytes
Description
This is the rate used in converting the settlement amount to cardholder billing amount. Transaction
amount is multiplied with this rate to gets Cardholder billing amount.
Representation
This field is Left justified and padded with spaces.
Field #9 – Transaction rate
Format n-8
Length 8 bytes
Description
The factor used in the conversion from amount, transaction to amount, settlement. The amount,
transaction is multiplied by this field to yield the amount, settlement. The leftmost digit denotes the
number of positions the decimal separator shall be moved from the right. Positions 2 to 8 of the field
represent the actual rate.
Representation
This field is Left justified and padded with spaces.
Field #10: System Audit Trace
Format n-6
Length 6 bytes
Description
It is a unique number.
Representation
GPACK
74
Generic ATM Framework
This field is zero filled and right justified.
Field #11: Local Transaction Time
Format n-6, hhmmss
Length 6 bytes
Description
This field represents the local time at the terminal when the transaction occurred.
Representation
hh Hour of day in a 24 hour clock. mm Minute within the hour.ss Seconds past the minute
Field #12: Local Transaction Date
Format n-4, MMDD
Length 4 bytes
Description
This field represents the local date at the terminal when the transaction occurred.
Representation
MM Month 01 to 12
DD Day of month 01-31
Field #13: Expiry Date
Format n-4, MMDD
Length 4 bytes
Description
Expiry date on the card, expressed as YYMM.
Field #14: Settlement Date
Format n-4, MMDD
Length 4 bytes
Description
The month and day for which financial totals are reconciled between the acquirer and the issuer.
Field #17: Merchant Type
Format n-4
Length 4 bytes
Description
This field is used to represent the type of merchant generating the request.
Representation
This field is zero filled and right justified.
Example
To represent a merchant type of 6011 (this is an ATM) use 6011.
Field #18: Source Channel Type
Format n-4
Length 4 bytes
Description
This field is used to represent the type of Source channel.
Representation
This field is zero filled and right justified.
GPACK
75
Generic ATM Framework
Field #19: Destination Type
Format n-4
Length 4 bytes
Description
This field is used to represent the type of Destination channel.
Representation
This field is zero filled and right justified.
Example
To represent a Source type of 6011 (this is an ATM) use 6011.
Field #20: Acquiring Institution Country Code
Format n-3
Length Three bytes
Description
This field contains the code of the country where the acquiring institution is located. This is the
financial organization that is responsible for the merchant or the ATM.
Field #21: Point-of-Service Country Mode
Format n-3
Length 3 bytes
Description
This is the code identifying the country where the card issuer is located.
Field #22: Point-of-Service Entry Mode
Format n-3
Length 3 bytes
Description
This field indicates the method by which the PAN was captured as well as the terminals PIN entry
capabilities.
Field #23: Point-of-Service Condition Code
Format n-2
Length 2 bytes
Description
This field is used to indicate the condition under which the transaction occurred.
Field #24: Point-of-Service PIN Capture Code
Format n-2
Length 2 bytes
Description
This field represents a code used to indicate the maximum number of PIN characters accepted by the
point-of-service device.
Field #25: Acquiring Institution Code
Format n-11
Description
It indicates the acquiring institution identifier.
Field #26: Forwarding Institution Code
Format n-11
Description
GPACK
76
Generic ATM Framework
A code identifying the institution that forwards the transaction in an interchange system en route to the
card issuer.
Field #27: Track-2 Data
Format n-37
Length 37 left justified, padded with spaces.
Description
This field contains the track2 data as captured by the device.
Field #28: Track-3 Data
Format n-104
Length 104 left justified, padded with spaces.
Description
The complete data on track-3 including the starting and ending delimiters, as read by the ATM from
the magnetic card.
Field #29: Retrieval Reference Number
Format n-12
Length 12 bytes
Description
A reference number supplied by the system retaining the original source information and used to
assist in locating that information or a copy thereof.
Field #30: Authorization Number
Format n-6
Length 6 bytes
Description
This field is required for all authorized transactions.
Field #31: Response Code
Format n-2
Length 2 bytes
Description
This field is required in all response messages and is used to indicate if the transaction was approved
or if it failed.
Response Code Definition
00 Transaction Approved
05 Unable to process
76 Invalid accounts [Balance Enquiry & Mini statement]
Note: Further Response codes with their errors can be configured in ATM.RES.COD.TABLE
Field #32: Card Acceptor Terminal Identification
Format n-16
Length 8 bytes
Description
This field is used to identify a terminal at the bank. It should be unique within that bank.
Representation
This field contains 16 bytes, left justified with spaces.
GPACK
77
Generic ATM Framework
Field #33: Card Acceptor Identification Code
Format n-15
Length 15 bytes
Description
The value in this field is network dependent.
Representation
This field contains 15 bytes of alphanumeric and special characters.
Field #34: Card Acceptor Name/Location
Format n-40
Length 40 bytes
Description
This field is used for the customer name and location.
Field #35: Additional Response Data
Format n-25
Length 25 bytes
Description
This field indicates additional amounts for all transactions.
Representation
This field describes the balance sent for all transactions
Subfield
Position
Format
Definition
1
1
n-1
1- Indicates that actual balance is present only
2- Indicates that available balance is present only
3- Indicates that available and actual balances are present
2
2
X
Ledger balance Positive/Negative indicator(0/-)
3
3-13
n-11
Ledger Balance
4
14
X
Available balance Positive/Negative indicator(0/-)
5
15-25
n-11
Available Balance
Example
To represent an available balance
1000000001098000000001098.
Field #36: Track-1 Data
Format n-76
Length 76 bytes data
Description
This field contains the track1 data as read from the card stripe by the terminal.
Field #37: Additional Data
Format n-44
Length 44 bytes
Description
For Future Use
GPACK
78
Generic ATM Framework
Field #38: Transaction Currency Code
Format n-3
Length 3 bytes
Description
This is a required field in all messages. It defines the currency code for Field 4 (transaction amount).
Representation
This field is composed of 3 digits, zero filled and right justified.
Example
To represent the code for US currency, use 840.
Field #39: Currency Code, Settlement
Format n-3
Length 3 bytes
Description
This is a code which identifies the currency used for settlement.
Field #40: Currency Code, Cardholder Billing
Format n-3
Length 3 bytes
Description
This field is a required field when the currency in which the transaction took place is not the same as
the cardholder billing currency.
Representation
This field is composed of 3 digits, zero filled and right justified.
Example
To represent the code for US currency, use 840.
Field #47: Original Data Elements
Format n-42
Length 42 bytes
Description
This field is required in all 04xx messages. It contains the data elements found in the original
message, intended to identify a transaction for correction or reversal.
Representation
There are five subfields within the message:
Description Type
Original message type identifier n-4 [MTI]
Original trace number n-6 [Field 9]
Spaces n-6
Original transmission time and date n-10 [Field 10 & 11]
Spaces n-6
Original transmission time and date n-10 [Field 6]
Example
0200614325 1112121291 0000049867
Field #48: Replacement Amounts
Format n-42
Length 42 bytes
Description
This field contains the new actual amount data elements necessary to perform a partial or full reversal
on a financial transaction.
GPACK
79
Generic ATM Framework
Field #50: From Account Number
Format n-28
Length 28 digits, left justified, padded with spaces
Description
This field is used to contain from account as entered by the user at the ATM. Alternatively, this field
can be used to return a from account number by the host.
Field #51: To Account Number
Format n-28
Length 28 digits, left justified, padded with spaces
Description
This field is used to contain to account as entered by the user at the ATM. Alternatively, this field can
be used to return to account number by the host.
Field #53: Additional Data
Format n-400
Length 400 digits, left justified, padded with spaces
Description
Bitmap 53 contains the STMT entries for Mini statement Transaction. For other transactions this field
will be null field.
Subfield
Position
Format
Definition
1
1-8
n-8
Date (in DD-MM-YY format)
2
9-24
n-16
Transaction Description
3
25-40
n-16
Transaction Amount
Example
14-04-11TRANSFER 100000.00 DB14-04-11TRANSFER 100000.00 DB
GPACK
80
Generic ATM Framework
7. ISO Message Field Format
7.1 Base24/ ATM
7.1.1 Online Transactions
Bit#
Field Name
0100
/0200
/1100
/1200
0110
/0210
/1110
/1210
Description
-
Message Type Identifier
M
M
-
Primary Bitmap
M
M
1
Secondary Bitmap
M
M
2
Primary Account Number (PAN)
M
M
3
Processing Code
M
M
4
Amount, Transaction
M
M
5
Amount, Settlement
C
6
Amount, Cardholder Billing
C
7
Transmission Date & Time
M
M
9
Conversion Rate, Settlement
C
C
Present if bit 5 is present
10
Conversion Rate, Cardholder Billing
C
C
Present if bit 6 is present
11
System Trace Number
M
M
Unique ID for all
transactions
12
Local Transaction Time
M
M
13
Local Transaction Date
M
M
14
Expiration Date
C
C
15
Settlement Date
C
C
18
Merchant Type
M
M
22
POS Entry Mode
C
C
25
POS Condition Code
C
C
26
POS Pin Capture Code
C
C
28
Amount, Transaction fee
M
M
29
ATM Surcharge Fee
C
C
32
Acquiring Institution Code
M
M
Acquirer bin no
35
Track-2 Data
C
C
GPACK
81
Generic ATM Framework
37
Retrieval Reference Number
M
M
38
Authorization Number
-
M
This field must be present
for all transactions
authorized by the issuer
processor.
39
Response Code
-
M
This field indicates the
disposition of the
transaction.
41
Card Acceptor Terminal Identification
M
M
42
Card Acceptor Identification Code
C
C
43
Card Acceptor Name and Location
M
M
48
Additional Data
C
C
This field is mandatory for
Mini statement alone.
Since this field will contain
all the transaction details.
49
Currency Code, Transaction
M
M
Original transaction
currency
50
Currency Code, Settlement
C
C
Present if bit 5 is present
51
Currency Code, Cardholder Billing
M
M
52
Personal Identification Number (PIN)
-
-
54
Additional Amount
-
M
Contains the balance of
the account.
60
For Private Use
C
C
102
From Account Identification
M
M
Contains the source
account number for the
transaction.
103
To Account Identification
C
C
For funds transfer should
contain the destination
account number.
127
Private Field
C
C
7.1.2 Force Posts/Advice Transactions
Bit#
Field Name
0220
/1220
0230
/1230
Description
-
Message Type Identifier
M
M
-
Primary Bitmap
M
M
1
Secondary Bitmap
M
M
2
Primary Account Number (PAN)
M
M
3
Processing Code
M
M
4
Amount, Transaction
M
M
5
Amount, Settlement
C
C
GPACK
82
Generic ATM Framework
6
Amount, Cardholder Billing
C
C
7
Transmission Date & Time
M
M
9
Conversion Rate, Settlement
C
C
Present if bit 5 is present
10
Conversion Rate, Cardholder Billing
C
C
Present if bit 6 is present
11
System Trace Number
M
M
Unique ID for all
transactions
12
Local Transaction Time
M
M
13
Local Transaction Date
M
M
14
Expiration Date
C
C
15
Settlement Date
C
C
18
Merchant Type
M
M
22
POS Entry Mode
C
C
25
POS Condition Code
C
C
26
POS Pin Capture Code
C
C
28
Amount, Transaction fee
M
M
29
ATM Surcharge Fee
C
C
32
Acquiring Institution Code
M
M
Acquirer bin no
35
Track-2 Data
C
C
37
Retrieval Reference Number
M
M
38
Authorization Number
-
M
This field must be present
for all transactions
authorized by the issuer
processor.
39
Response Code
-
M
This field indicates the
disposition of the
transaction.
41
Card Acceptor Terminal Identification
M
M
42
Card Acceptor Identification Code
C
C
43
Card Acceptor Name and Location
M
M
48
Additional Data
C
C
This field is mandatory for
Mini statement alone.
Since this field will contain
all the transaction details.
49
Currency Code, Transaction
M
M
Original transaction
currency
50
Currency Code, Settlement
C
C
Present if bit 5 is present
51
Currency Code, Cardholder Billing
M
M
Present if bit 6 is present
52
Personal Identification Number (PIN)
-
-
54
Additional Amount
-
M
Contains the balance of
the account.
60
For Private Use
C
C
102
From Account Identification
M
M
Contains the source
account number for the
GPACK
83
Generic ATM Framework
transaction.
103
To Account Identification
C
C
For funds transfer should
contain the destination
account number.
127
Private Field
C
C
7.1.3 Reversal Transactions
Bit#
Field Name
0420
/1420
0430
/1430
Description
-
Message Type Identifier
M
M
-
Primary Bitmap
M
M
1
Secondary Bitmap
M
M
2
Primary Account Number (PAN)
M
M
3
Processing Code
M
M
4
Amount, Transaction
M
M
5
Amount, Settlement
C
C
6
Amount, Cardholder Billing
C
C
7
Transmission Date & Time
M
M
9
Conversion Rate, Settlement
C
C
Present if bit 5 is present
10
Conversion Rate, Cardholder Billing
C
C
Present if bit 6 is present
11
System Trace Number
M
M
Unique ID for all
transactions
12
Local Transaction Time
M
M
13
Local Transaction Date
M
M
15
Settlement Date
C
C
18
Merchant Type
M
M
22
POS Entry Mode
C
C
25
POS Condition Code
C
C
26
POS Pin Capture Code
C
C
28
Amount, Transaction fee
M
M
29
ATM Surcharge Fee
C
C
32
Acquiring Institution Code
M
M
Acquirer bin no
35
Track 2 Data
C
C
37
Retrieval Reference Number
M
M
38
Authorization Number
-
M
This field must be present
GPACK
84
Generic ATM Framework
for all transactions
authorized by the issuer
processor.
39
Response Code
-
M
This field indicates the
disposition of the
transaction.
41
Card Acceptor Terminal Identification
M
M
42
Card Acceptor Identification Code
C
C
43
Card Acceptor Name and Location
M
M
49
Currency Code, Transaction
M
M
Original transaction
currency
50
Currency Code, Settlement
C
C
Present if bit 5 is present
51
Currency Code, Cardholder Billing
M
M
Present if bit 6 is present
54
Additional Amount
-
M
Contains the balance of
the account.
60
For Private Use
C
C
90
Original Data Elements
M
M
This field contains the
Original Transaction
elements i.e.
MTI*11*7*32*33
95
Replacement Amounts
C
C
102
From Account Identification
M
M
Contains the source
account number for the
transaction.
103
To Account Identification
C
C
For funds transfer should
contain the destination
account number.
127
Private Field
C
C
7.1.4 Network Transactions
Bit#
Field Name
0800
/1800
0810
/1810
Description
-
Message Type Identifier
M
M
-
Primary Bitmap
M
M
1
Secondary Bitmap
M
M
7
Transmission Date & Time
M
M
11
System Trace Number
M
M
32
Acquiring Institution Code
M
M
39
Response Code
-
M
This field indicates the
disposition of the
transaction.
70
Network Management Code
M
M
Contains the Sign on or
signoff or Echo message.
GPACK
85
Generic ATM Framework
7.2 Phoenix
7.2.1 Online Transactions
Bit#
Field Name
0200
/205
0210
/215
Description
-
Message Type Identifier
M
M
1
Customer Identification Number
M
M
2
Primary Account Number (PAN)
M
M
3
Processing Code
M
M
4
Amount, Transaction
M
M
5
Amount, Settlement
C
6
Amount, Cardholder Billing
C
7
Transmission Date & Time
M
M
9
Transaction Fee
C
10
System Trace Number
M
M
Unique ID for all
transactions
11
Local Transaction Time
M
M
12
Local Transaction Date
M
M
13
Expiration Date
C
C
14
Settlement Date
C
C
17
Merchant Type
M
M
18
Source Channel Type
M
M
19
Destination Type
C
C
22
POS Entry Mode
C
C
25
Acquiring Institution Code
M
M
Acquirer bin no
26
Forward Institution code
C
C
27
Track-2 Data
C
C
28
Track-3 Data
C
C
29
Retrieval Reference Number
M
M
30
Authorization Number
-
M
This field must be present
for all transactions
authorized by the issuer
processor.
31
Response Code
-
M
This field indicates the
disposition of the
transaction.
32
Card Acceptor Terminal Identification
M
M
GPACK
86
Generic ATM Framework
33
Card Acceptor Identification Code
C
C
34
Card Acceptor Name and Location
M
M
35
Additional Amount
-
M
Contains the balance of
the account.
38
Currency Code, Transaction
M
M
Original transaction
currency
39
Currency Code, Settlement
C
C
Present if bit 5 is present
40
Currency Code, Cardholder Billing
C
C
50
From Account Identification
M
M
Contains the source
account number for the
transaction.
51
To Account Identification
C
C
For funds transfer should
contain the destination
account number.
53
Additional Data
-
C
This field is mandatory for
Mini statement alone.
Since this field will contain
all the transaction details.
7.2.2 Reversal Transactions
Bit#
Field Name
0206
/420
0216
/430
Description
-
Message Type Identifier
M
M
1
Customer Identification Number
M
M
2
Primary Account Number (PAN)
M
M
3
Processing Code
M
M
4
Amount, Transaction
M
M
5
Amount, Settlement
C
6
Amount, Cardholder Billing
C
7
Transmission Date & Time
M
M
9
Transaction Fee
C
10
System Trace Number
M
M
Unique ID for all
transactions
11
Local Transaction Time
M
M
12
Local Transaction Date
M
M
13
Expiration Date
C
C
14
Settlement Date
C
C
GPACK
87
Generic ATM Framework
17
Merchant Type
M
M
18
Source Channel Type
M
M
19
Destination Type
C
C
22
POS Entry Mode
C
C
25
Acquiring Institution Code
M
M
Acquirer bin no
26
Forward Institution code
C
C
27
Track-2 Data
C
C
28
Track-3 Data
C
C
29
Retrieval Reference Number
M
M
30
Authorization Number
-
M
This field must be present
for all transactions
authorized by the issuer
processor.
31
Response Code
-
M
This field indicates the
disposition of the
transaction.
32
Card Acceptor Terminal Identification
M
M
33
Card Acceptor Identification Code
C
C
34
Card Acceptor Name and Location
M
M
35
Additional Amount
-
M
Contains the balance of
the account.
38
Currency Code, Transaction
M
M
Original transaction
currency
39
Currency Code, Settlement
C
C
Present if bit 5 is present
40
Currency Code, Cardholder Billing
C
C
47
Original Data elements
M
M
48
Replacement Elements
C
C
If partial reversal is present
50
From Account Identification
M
M
Contains the source
account number for the
transaction.
51
To Account Identification
C
C
For funds transfer should
contain the destination
account number.
7.2.3 Network Transactions
Bit#
Field Name
0800
0810
Description
-
Message Type Identifier
M
M
1
Transmission Date & Time
M
M
2
System Trace Number
M
M
3
Settlement date
M
M
4
Response Code
-
M
This field indicates the
disposition of the
transaction.
5
Network Management Code
M
M
Contains the Sign on or
signoff or Echo message.
GPACK
88
Generic ATM Framework
8. Frequently asked Questions
Question: In Mini statement how to print last 7 transactions made instead of 10 transactions
made?
Answer: In Mini statement, Change the Constant value from 10 to 7
Question: How to add posting restrictions for Non Financial transactions?
Answer: Generic routine called ATM.CHK.POST.RESTRICT will be available in the pack. Kindly
attach this routine to 3.1 of Response mapping, ahead of ATM.ISO.ERR.CODE.RTN.
Question: How to add customized routines in Framework?
Answer: If any values have to be triggered during the formation of OFS String, then those routines
have to be attached in REQUEST mapping record after AT.ISO.FMT.BAL.RTN
Note: In mini statement, customized routines have to be attached from 3.3, since routines
attached in 3.1 and 3.2 are used.
Question: How to display the balances even if the transaction is declined?
Answer: This generic routine AT.GET.BAL.AFT.TXN can be attached in RESPONSE mapping as
given below to display balances, if required.
GPACK
89
Generic ATM Framework
Similarly if AUTH CODE is not displayed kindly follow the above steps to attach this generic
routine AT.GET.AUTH.CODE
Note: This routine can also be attached if charges are raised based on Separate FT concept. if
attached, the latest balances after charges are raised will be reflected.
Question: Does foreign currency support in ATM Framework?
Answer: Yes, it will support based on configurations. Kindly follow the below instructions
In Request Message of INTRF.MAPPING records, kindly configure as below
Intrf Fld Ps will be as 49. Set it based on requirements and attach the generic routine
AT.CALC.FCY.CCY with Field source set as Rtn
Ex: change it as Transaction currency [i.e Txn currency posn - 49 here] *C%* Settlement currency
[i.e. Foreign currency posn - 51 here]
Note: Transaction currency position should always be provided and it should be similar to
TXN.CCY set in ATM.PARAMETER.
Similarly do the same for Credit Amount as transaction amount field position *C%* settlement
amount position and attach the generic routine AT.CALC.FCY.AMT with Field source set as Rtn
, if needed
GPACK
90
Generic ATM Framework
Question: How to log the transaction details for Non financial transactions and for failed
transactions?
Answer: Kindly attach this ATM.UPD.TXN.LOG.RTN to RESPONSE mapping record. This routine
will update all the transaction details even for failure transactions and also for Non Financial
transactions.
9. Exceptions
* - Indicates the transactions which are not available for PHOENIX Interface in Generic Framework.
However these transactions can be provided based on the request from client.
**- Indicates the fields which are not supported for Base24/ATM interfaces
