Tedlar Sample Bags Cat. No. 231 01 TCLP Operating Instructions Form 3783
User Manual: 3783
Open the PDF directly: View PDF .
Page Count: 1
Operating Instructions
863 Valley View Road, Eighty Four, PA 15330 USA
Tel: 724-941-9701 Fax: 724-941-1369 e-mail: skctech@skcinc.com
Tedlar® Sample Bags
Cat. No. 231-01-TCLP
The 231-01-TCLP is a disposable 1-liter, Tedlar film sample bag with a single
stainless steel fi ing designed for use with a Zero Headspace Extractor (ZHE) for
the EPA TCLP method. The use of Tedlar sample bags with stainless steel fi ings
has been validated by the EPA.
Operation
The bag is designed to be a ached directly to the extractor vessel via a special
stainless steel coupler.
To open the fi ing, remove the knurled screw cap on the fi ing. A ach the coupler
to the bag by screwing onto the bag fi ing, then a ach directly to the ZHE unit.
Note: SKC Cat. No. 231-01-TCLP bags are designed for single use applications and are not intended
for the storage and transport of hazardous materials.
Tedlar is a registered trade name of DuPont Corporation.
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy, which
provides SKC’s sole liability and the buyer’s exclusive remedy. To view the complete
SKC Limited Warranty and Return Policy, go to h p://www.skcinc.com/warranty.asp.
www.skcinc.com
Form 3783 Rev 1612