Manual For The 62313 400/900 Watt Oscillating Parabolic Heater

User Manual: Manual for the 62313 400/900 Watt Oscillating Parabolic Heater 400/900 Watt Oscillating Parabolic Heater

Open the PDF directly: View PDF PDF.
Page Count: 8

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
ITEM 62313
REV 14e
Owners Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2014 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 62313
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Read all instructions before
using this heater.
2. This heater is hot when in use.
To avoid burns, do not let bare skin
touch hot surfaces. If provided,
use handles when moving this heater.
Keep combustible materials,
such as furniture, pillows, bedding,
papers, clothes, and curtains at
least 3 feet (0.9m) from the front
of the heater and keep them
away from the sides and rear.
3. Extreme caution is necessary when
any heater is used by or near children
or invalids and whenever the heater
is left operating and unattended.
4. Always unplug heater when not in use.
5. Do not operate any heater with a
damaged cord or plug or after the heater
malfunctions, has been dropped or
damaged in any manner. Discard heater,
or return to authorized service facility
for examination and/or repair.
6. Do not use outdoors.
7. This heater is not intended for
use in bathrooms, laundry areas
and similar indoor locations.
Never locate heater where it may fall
into a bathtub or other water container.
8. Do not run cord under carpeting.
Do not cover cord with throw rugs,
runners, or similar coverings. Do not
route cord under furniture or appliances.
Arrange cord away from traffic area
and where it will not be tripped over.
9. To disconnect heater, turn controls to
off, then remove plug from outlet.
10. Do not insert or allow foreign objects
to enter any ventilation or exhaust
opening as this may cause an electric
shock or fire, or damage the heater.
11. To prevent a possible fire, do not block
air intakes or exhaust in any manner.
Do not use on soft surfaces, like a bed,
where openings may become blocked.
12. A heater has hot and arcing or
sparking parts inside. Do not use it
in areas where gasoline, paint, or
flammable liquids are used or stored.
13. Use this heater only as described
in this manual. Any other use not
recommended by the manufacturer
may cause fire, electric shock,
or injury to persons.
14. Always plug heaters directly
into a wall outlet/receptacle.
Never use with an extension cord
or relocatable power strip.
15. Place heater on a hard, stable, level surface
before operating to avoid tipping.
The Tip Over Shutoff Switch may
prevent operation if the heater
is placed on a soft surface.
16. This appliance has a polarized plug
(one blade is wider than the other).
To reduce the risk of electric shock, this
plug is intended to fit into a polarized outlet
only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
Do not change the plug in any way.
Do not attempt to defeat this safety feature.
17. Maintain labels and nameplates on the
heater. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Page 3For technical questions, please call 1-888-866-5797.Item 62313
18. This heater is not a toy.
Do not allow children to operate heater
controls or play with or near heater.
19. Any other servicing not specifically
explained in this manual must be
performed only by an authorized
service representative.
20. Disconnect the Power Cord from
the outlet and allow the heater to
thoroughly cool before cleaning,
servicing, or storing this heater.
Such preventive safety measures reduce
the risk of burns, electric shock, and fire.
21. Even though this heater has a
Tip Over Shutoff Switch, it must be
monitored at all times while operating.
The Tip Over Shutoff Switch is a backup
safety device only, and is not intended
to permit unattended operation.
22. WARNING: The cord of this product
contains lead, a chemical known
to the State of California to cause
cancer, and birth defects or other
reproductive harm. Wash hands
after handling. (California Health &
Safety Code § 25249.5, et seq.)
23. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close proximity to
heart pacemaker could cause pacemaker
interference or pacemaker failure.
24. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all conditions and situations that may
occur. It must be understood by operator
that common sense and caution are factors
which cannot be built into this heater,
but must be supplied by operator.
SAVE THESE INSTRUCTIONS
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
Specifications
Electrical Rating 120VAC / 60Hz / 900/500W
Tip Over Switch Type Shutoff
4006217
Page 4 For technical questions, please call 1-888-866-5797. Item 62313
User Instructions
Read the ENTIRE IMPORTANT INSTRUCTIONS section at the beginning of this manual
including all text under subheadings therein before set up or use of this heater.
TO PREVENT SERIOUS INJURY FROM BURNS, FIRE OR ELECTRIC SHOCK:
Turn all heater controls off, unplug the heater from its electrical outlet, and allow the
heater to cool completely before set up or making any adjustments to the heater.
Operation
Function KnobTimer Knob
Figure A: Controls and Indicators
1. Place heater on a hard, stable, level
surface away from flammable objects.
2. Make sure that all controls are in
their off-position, then plug the
heater directly into a wall outlet.
3. Turn the Function Knob to the
desired function (see Figure A):
LOW - Low heat setting.
Heater will not turn.
HIGH - High heat setting.
Heater will not turn.
LOW TURN - Low heat setting.
Heater will slowly oscillate.
HIGH TURN - Low heat setting.
Heater will slowly oscillate.
4. Turn the Timer Knob to the
desired operation time, in minutes.
Turn the Timer Knob to ON for continuous
operation without automatic shutoff.
WARNING! TO PREVENT SERIOUS INJURY
AND DEATH FROM FIRE:
Even though this heater has a
Tip Over Shutoff Switch, it must be
monitored at all times while operating.
The Tip Over Shutoff Switch is a backup
safety device only, and is not intended
to permit unattended operation.
5. To prevent accidents, turn all heater
controls off and unplug it after use.
6. Allow heater to cool completely,
then clean, and store the heater
indoors out of children’s reach.
Page 5For technical questions, please call 1-888-866-5797.Item 62313
Troubleshooting
If the heater stops operating, or will not operate:
1. Move Heater onto hard, level, stable surface. Soft surfaces, such as carpeting,
may trigger the Tip Over Shutoff Switch and prevent operation.
2. Set all controls to heating positions: Turn Function Knob to LOW, HIGH, LOW TURN,
or HIGH TURN, and turn Timer Knob to ON or to a numbered timer setting.
3. Make sure Power Cord is directly connected to a powered outlet.
Do not use an extension cord. Check that outlet circuit breaker is not tripped.
4. Check heater vents and grill for obstruction. If an obstruction is found, turn all heater controls off,
allow heater to cool completely, remove obstruction, and plug the heater back in.
5. To reset Heater, unplug and use a fire-proof, non-conductive rod to press the Manual Reset Button.
Manual Reset
Button
Fireproof, non-
conductive rod
Figure B: Manual Reset Button
Page 6 For technical questions, please call 1-888-866-5797. Item 62313
Record Serial Number Here:
Note: If heater has no serial number,
record month and year of purchase instead.
Note: Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.
User Servicing Instructions
Any other servicing not specifically explained in this manual must
be performed only by an authorized service representative.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC SHOCK:
Turn the Power Switch of the heater off, unplug the heater from its
electrical outlet, and allow the heater to cool completely before performing
any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM HEATER FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the heater. Check for:
loose hardware,
misalignment or binding of moving parts,
cracked or broken parts,
damaged electrical wiring, and
any other condition that may
affect its safe operation.
2. Clean regularly to prevent dust
from accumulating on the heater.
Wipe external surfaces off using a dry cloth.
WARNING! To prevent serious injury from
electric shock, do not get the heater wet.
3. Do not lubricate any parts of this heater.
4. WARNING! If the supply cord of this
heater is damaged, it must be replaced
only by a qualified service technician.
5. After use, coil the cord around the base, and
store the heater with the controls in their
off positions in a dry, stable, indoor location.
Note: Also see Troubleshooting on page 5.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Page 7For technical questions, please call 1-888-866-5797.Item 62313
Part Description Qty
1 Center Cover 1
2 Grill 1
3 Front Reflector 1
4 Tube Clip 3
5 Heating Element 1
6Support Tube 1
7 Rear Reflector 1
8 Rear Reflector Bracket 1
9 Front Fork 1
10 Rear Cover 1
11 Rear Fork 1
12 Knob Cover 2
13 Function Knob 1
14 Timer Knob 1
Part Description Qty
15 Plate 1
16 Turntable 1
17 Connector 1
18 Oscillator 1
19 Tip Over Shutoff Switch 1
20 Control Panel 1
21 Timer 1
22 Motor 1
23 Base Cover 1
24 Clamp Plate 1
25 Base 1
26 Diode 1
27 Power Cord 1
28 Manual Reset Button 1
Parts List and Diagram
28
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase. This
warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or
accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the complaint
must accompany the merchandise. If our inspection verifies the defect, we will either repair or
replace the product at our election or we may elect to refund the purchase price if we cannot
readily and quickly provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted from causes not
within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.

Navigation menu