Manual For The 62549 Solar Shed Light
User Manual: Manual for the 62549 Solar Shed Light Solar Shed Light
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. REV 15c Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2015 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Table of Contents Safety Safety.......................................................... 2 Maintenance................................................ 6 Specifications.............................................. 4 Setup........................................................... 4 Operation..................................................... 5 Parts List and Diagram................................ 7 Warranty...................................................... 8 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Setup Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Operation IMPORTANT SAFETY INFORMATION Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1. Keep installation area clean. Cluttered areas invite accidents. 2. Observe installation area conditions. Keep work area well lit during installation. Maintenance 3. Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for any broken or damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately. Do not use the Security Light if any switch does not turn on and off properly. 4. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Page 2 5. Check hardware and assembled parts after assembling. All connections should be tight and hardware tightened. 6. Verify that installation surface has no hidden utility lines before drilling or driving screws. 7. Keep children away. Mount the Light, Solar Panel, and Cord out of children’s reach. 8. Dress properly. Protective, electrically non‑conductive clothes and nonskid footwear are recommended when working with the Solar Powered Security Light. Wear restrictive hair covering to contain long hair. 9. Use eye protection. Wear ANSI-approved impact safety goggles when setting up this product. For technical questions, please call 1-888-866-5797. Item 62549 11. Do not overreach. Keep proper footing and balance at all times. If a ladder is to be used during installation, it should be supported by an assistant. 12. Do not set up the Solar Shed Light if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not set up the Light. 13. Have your product serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. 14. WARNING: The cord of this product contains lead and/or di (2-ethylhexyl) phthalate (DEHP), chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) Safety 10. Maintain products with care. Keep the Solar Powered Security Light clean for better and safer performance. Inspect the Light periodically. If damaged, have it repaired by a qualified technician. 15. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Setup Lithium Battery Safety Warnings LITHIUM BATTERIES STORE A LARGE AMOUNT OF ENERGY AND WILL VENT FIRE OR EXPLODE IF MISTREATED: 1. Keep Battery dry. 2. DO NOT DO ANY OF THE FOLLOWING TO THE BATTERY: a. Open, b. Drop, c. d. e. f. Short-circuit, Puncture, Incinerate, or Expose to temperatures greater than 140°F. 3. Do not use or charge battery if damaged. Maintenance Operation SAVE THESE INSTRUCTIONS. Item 62549 For technical questions, please call 1-888-866-5797. Page 3 Specifications Safety Lamp 4 SMD LED Battery 3.2V, 600mAh, Lithium Solar Panel 4-5/8" x 3-1/8" Amorphous Silicon Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 7. Installation Setup 1. Decide where you want to place the Lamp and the Solar Panel. The Solar Panel is equipped with a 16 ft. connecting wire, so the Lamp and Solar Panel can be installed up to 16 ft. apart. The Solar Panel must be set in a location that receives full, direct sunlight, a minimum of eight hours a day. Ideally, the solar panel should be angled slightly toward the south (northern hemisphere). 3. Mount the Lamp: a. Locate the unit six to eight feet above ground on a solid surface capable of supporting the Lamp and secure enough so that it will not move when exposed to vibrations or wind. b. Mark the hole locations of the Mounting Bracket, then set the Lamp aside. a. Place the Solar Panel in the desired location, adjusting the unit to best fit the surface. c. Verify that installation surface has no hidden utility lines before drilling or driving screws. Drill holes for the enclosed Screws and Anchor Sleeves. b. Mark the hole locations of the Base, then set the Solar Panel aside. d. Insert the Anchor Sleeves then secure the Lamp in place with the screws. 2. Mount the Solar Panel: Operation c. Verify that installation surface has no hidden utility lines before drilling or driving screws. Drill holes for the enclosed Screws and Anchor Sleeves. 4. Carefully route the Power Cord of the Solar Panel to the Lamp and plug it into the Outlet on the back of the Lamp. d. Insert the Anchor Sleeves then secure the Solar Panel in place with the Screws. Initial Battery Charging Before the Shed Light can operate properly, the battery must be fully charged. To charge the battery: 2. Allow the battery to charge for 3648 hours of full sunlight. 1. Turn the Light OFF. Maintenance Page 4 For technical questions, please call 1-888-866-5797. Item 62549 Functions Lamp Safety Solar Panel Wing Nut Mounting Hole Setup Base Operation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. 2. Pull power cord again to turn light OFF. Maintenance Operation 1. Pull Power Cord to turn Light ON. Item 62549 For technical questions, please call 1-888-866-5797. Page 5 Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. Safety TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication Setup 1. BEFORE EACH USE, inspect the general condition of the tool. Check for: • loose hardware, • misalignment or binding of parts, • cracked or broken parts, and • any other condition that may affect its safe operation. 2. AFTER USE, wipe external surfaces of the tool with clean cloth. Replacing the Batteries The battery compartment is sealed. The battery is a high-quality lithium battery that will not need replacement during the typical life of this item. Troubleshooting Operation Problem Light won’t turn on. Possible Causes Battery not fully charged. Likely Solutions Keep solar panel clean. Allow to charge in full sunlight for 36-48 hours with the Power Switch OFF. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Maintenance Page 6 For technical questions, please call 1-888-866-5797. Item 62549 Parts List and Diagram THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Description Lamp Solar Panel Mounting Bracket Battery Battery Cover Qty 1 1 1 1 1 Part 6 7 8 9 10 Description Switch Wing Nut And Bolt Set Screw Anchor Sleeve Power Cord (Not Shown) Qty 1 1 2 2 1 Maintenance Operation 1 2 3 4 5 Setup Part Safety PLEASE READ THE FOLLOWING CAREFULLY Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 62549 For technical questions, please call 1-888-866-5797. Page 7 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02 Instance ID : uuid:37b4a742-44cf-2548-8e3d-b8bbdf81b3ad Original Document ID : adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Document ID : xmp.id:ff8b5ebc-488a-493c-be48-54c294198ef8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:743fda60-c1fb-4e6c-8553-be9e11c1b427 Derived From Document ID : xmp.did:115331ea-f6ed-49f2-8b04-e7ca05297584 Derived From Original Document ID: adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2015:03:10 14:45:24-07:00 Create Date : 2015:03:10 14:45:24-07:00 Modify Date : 2015:03:10 14:45:28-07:00 Metadata Date : 2015:03:10 14:45:28-07:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Export Script : Export pdf script v3.80 Format : application/pdf Creator : Adobe Rights : Copyright©2015 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Subject : 04.05.02.02 Web Statement : http://www.harborfreight.com Marked : True Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 8 Author : AdobeEXIF Metadata provided by EXIF.tools