Manual For The 62661 18 In. Glossy Red End Cabinet Roller Tool Chest
User Manual: Manual for the 62661 18 in. Glossy Red End Cabinet For Roller Tool Chest 18 in. Glossy Red End Cabinet For Roller Tool Chest
Open the PDF directly: View PDF .
Page Count: 8
|Open PDF In Browser||View PDF|
Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. REV 15i Visit our website at: http://www.harborfreight.com Email our technical support at: firstname.lastname@example.org When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2015 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Specifications Component Size Weight Capacity Shelf (x2) 16-1/2" W x 16-1/2" D 44 lb each Hanging Rod 16-5/8" W 25 lb Top Drawer 12" W x 16" D x 2-1/4" H 59 lb Bottom Drawer 12" W x 16" D x 5-1/2" H 59 lb Total Combined Weight Capacity (Evenly distributed from bottom up.) Page 2 For technical questions, please call 1-888-866-5797. 231 lb Item 62661 IMPORTANT SAFETY INFORMATION Assembly Precautions 1. Assemble only according to these instructions. Mount only on side of Bottom Cabinet according to instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3. Keep assembly area clean and well lit. 5. Do not assemble when tired or when under the influence of alcohol, drugs or medication. 6. Weight capacity and other product capabilities apply to properly and completely assembled product only. 7. Assemble on a flat, level, hard and smooth surface capable of safely supporting loaded Cabinet. 4. Keep bystanders out of the area during assembly. Use Precautions TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING: 1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM. 5. Use as intended only. 2. This product is not a toy nor a toy chest. Do not allow children to play with or near this item. 6. Inspect before every use; do not use if parts are loose or damaged. 3. Do not exceed weight capacities, evenly distributed from bottom up. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. 7. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 4. Do not move or lift while loaded. Item 62661 For technical questions, please call 1-888-866-5797. Page 3 Assembly and Mounting Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Assembly 1. Attach Handle (1) to door with Handle Screws (2). Handle 3. Install one Shelf Bracket (9) into each of four vertical rails in Locker’s interior. Shelf Bracket Vertical Rail Handle Screws Figure C 4. Place Shelf on Shelf Brackets. Figure A 2. Place Hanging Rod (11) into Hanging Rod Supports. Hanging Rod Shelf Shelf Bracket Hanging Rod Support Figure D Figure B Mounting 1. Remove handle from side of Bottom Cabinet. 2. Using an assistant, place EMPTY Side Locker onto either side of Bottom Cabinet, making sure lips on Side Locker fit securely over edge of Bottom Cabinet. Bottom Cabinet 3. Secure Side Locker to Bottom Cabinet from the inside, using Mounting Bolts (10). Lips Bolts Figure F Figure E Page 4 Side Locker 4. Insert Plugs (12) into four holes on other side of Cabinet. For technical questions, please call 1-888-866-5797. Item 62661 Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Fill Locker evenly, from bottom to top. Do not exceed weight capacities. Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use. 1. PERIODICALLY, inspect the general condition of the Cabinet. Check for: • loose hardware, • misalignment or binding of moving parts, 2. Wipe external surfaces of the Cabinet with clean cloth. 3. Lubricate Drawer Slides as needed. • cracked or broken parts, • any other condition that may affect its safe operation. Item 62661 For technical questions, please call 1-888-866-5797. Page 5 Parts List and Diagram Parts List Part 1 2 3 4 5 6 7 Description Handle Handle Screw Top Drawer 12" W x 16" D x 2-1/4" H Bottom Drawer 12" W x 16" D x 5-1/2" H Drawer Liner (not shown) Drawer Label (not shown) Fixed Shelf Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Page 6 Qty 1 2 1 1 2 2 1 Part 8 9 10 11 12 13 Description Qty Adjustable Shelf Shelf Bracket (not shown) Mounting Bolt (M6x20) Hanging Rod Plug (not shown) Key (not shown) 1 4 2 1 4 2 Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-888-866-5797. Item 62661 Assembly Diagram 11 10 1 8 2 7 3 Item 62661 4 For technical questions, please call 1-888-866-5797. Page 7 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Instance ID : uuid:e6ccc6de-fd48-1846-8b2b-a8741fe92d67 Original Document ID : adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Document ID : xmp.id:181540bd-a0ed-430c-b46e-3f7410693cb9 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:b601b84f-f869-4028-8b91-a852d993098a Derived From Document ID : xmp.did:7a512181-8a43-41f6-8de5-ad369e489532 Derived From Original Document ID: adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2015:09:01 09:02:17-07:00 Create Date : 2015:09:01 09:02:17-07:00 Modify Date : 2015:09:01 09:02:23-07:00 Metadata Date : 2015:09:01 09:02:23-07:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Export Script : Export pdf script v3.82 Format : application/pdf Rights : Copyright©2015 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Subject : 03.12.01.03 Web Statement : http://www.harborfreight.com Marked : True Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools