Manual For The 63087 8750 Max Starting/7000 Running Watts, 13 HP (420cc) Generator CARB With GFCI Outlet Protection

User Manual: Manual for the 63087 8750 Max Starting/7000 Running Watts, 13 HP (420cc) Generator CARB with GFCI Outlet Protection 8750 Max Starting/7000 Running Watts, 13 HP (420cc) Generator CARB with GFCI Outlet Protection

Open the PDF directly: View PDF .
Page Count: 28

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5

65,"7%&'(%$*4.8"4,7%#'//&($%,$-%

/(&9'4$#'//&($:.,(+&(2(*"3.$14&5

65,"7%&'(%683"8*%#'//&($%,$-%/(*9,$&(:.,(+&(2(*"3.$14&5

;#"83%,8%*83"8*%"89&&(#%

<=>%?@AA%BC;%@>%D@>;E6F1

683"8*%*G.,'#$%4&8$,"8#%4,(+&8%5&8&G"9*1%%

E."#%"#%,%/&"#&8%H&'%4,88&$%#**%&(%#5*771

>6!6I%'#*%"8#"9*%

,%.&5*%&(%3,(,3*J%

6!6>%@K%9&&(#%,89%

)"89&)#%,(*%&/*81

C87H%'#*%C;EF@L6%

,89%2,(%,),H%2(&5%

)"89&)#J%9&&(#J%

,89%M*8$#1

Owner’s Manual & Safety Instructions

Save This Manual%Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

;#"83%,%3*8*(,$&(%"89&&(#%<=>%

?@AA%BC;%@>%D@>;E6F1

N*8*(,$&(%*G.,'#$%4&8$,"8#%

4,(+&8%5&8&G"9*1%%E."#%"#%,%/&"#&8%

H&'%4,88&$%#**%&(%#5*771

>6!6I%'#*%"8#"9*%

,%.&5*%&(%3,(,3*J%

6!6>%@K%9&&(#%,89%

)"89&)#%,(*%&/*81

C87H%'#*%C;EF@L6%

,89%2,(%,),H%2(&5%

)"89&)#J%9&&(#J%

,89%M*8$#1

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly a nd service may not be i ncluded.

I*,9%$."#%5,$*(",7%+*2&(*%'#"83%$."#%/(&9'4$1%

K,"7'(*%$&%9&%#&%4,8%(*#'7$%"8%#*("&'#%"8O'(H1%

F=!6%EP@F%D=>;=A1

I6!%QR7

Page 2 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

E,+7*%&2%<&8$*8$#

Safety ......................................................... 2

Setup .......................................................... 6

Specifications ............................................. 6

Operation ................................................... 10

Maintenance .............................................. 16

Parts List and Diagram .............................. 22

Warranty .................................................... 24

Z=I>@>N%FBD[CAF%=>L%L6K@>@E@C>F

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

@DYCIE=>E%F=K6EB%@>FEI;<E@C>F

F=!6%EP6F6%@>FEI;<E@C>F

This manual contains important instructions that should be followed during

installation and maintenance of the Generator and any batteries.

F*$%'/%Y(*4,'$"&8#

1. This unit is to be installed so that access is

restricted to only qualified service personnel

who have been instructed of the reasons for the

restrictions applied to the location and about any

precautions that must be taken. Access shall be

through the use of a special tool, or lock and key,

or other means of security and shall be controlled

by the authority responsible for the location.

2. Gasoline fuel and fumes are flammable, and

potentially explosive. Use proper fuel storage

and handling procedures. Do not store fuel

or other flammable materials nearby.

3. Have multiple ABC class fire extinguishers nearby.

4. Operation of this equipment may create sparks that

can start fires around dry vegetation.

A spark arrestor may be required. The operator

should contact local fire agencies for laws or

regulations relating to fire prevention requirements.

5. Set up and use only on a flat, level,

well-ventilated surface.

6. All connections and conduits from the Generator

to the load must only be installed by trained and

licensed electricians, and in compliance with all

relevant local, state, and federal electrical codes and

standards, and other regulations where applicable.

7. Connections for standby power to a building

electrical system must be made by a qualified

electrician. The connection must isolate the

Generator power from utility power, and must

comply with all applicable laws and electrical codes.

Page 3K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

F*$%'/%Y(*4,'$"&8#%\4&8$"8'*9]

8. Wear ANSI-approved safety goggles, heavy-duty

work gloves, and dust mask/respirator during set up.

9. Use only lubricants and fuel

recommended in this manual.

10. Improper connections to a building electrical system

can allow electrical current from the Generator

to backfeed into the utility lines. Such backfeed

may electrocute utility company workers or others

who contact the lines during a power outage, and

the Generator may explode, burn, or cause fires

when utility power is restored. Consult the utility

company and a qualified electrician if intending

to use the Generator for back up power.

11. Do not operate the Generator before grounding.

The Generator must be earth-grounded

in accordance with all relevant electrical

codes and standards before operation.

C/*(,$"83%Y(*4,'$"&8#

1. <=I[C>%DC>C^@L6%P=_=IL%

;#"83%,%3*8*(,$&(%"89&&(#%<=>%?@AA%

BC;%@>%D@>;E6F1%

Generator exhaust contains carbon

monoxide. This is a poison you cannot

see or smell.

NEVER use inside a home or garage, EVEN IF

doors and windows are open.

Only use OUTSIDE and far away from windows,

doors, and vents.

2. Never use a generator indoors, including in

garages, basements, crawlspaces and sheds.

Opening doors and windows or using fans will NOT

prevent carbon monoxide build up in the home.

3. When using generators, keep them outdoors

and far away from open doors, windows,

and vents to avoid toxic levels of carbon

monoxide from building up indoors.

4. If you start to feel sick, dizzy, or weak while

using a generator, get to fresh air right away.

The carbon monoxide from generators can

quickly lead to full incapacitation and death.

5. Keep children away from the equipment,

especially while it is operating.

6. Keep all spectators at least six feet

from the Engine during operation.

7. Do not touch engine during use.

Let engine cool down after use.

8. Never store fuel or other flammable

materials near the engine.

9. Fire Hazard! Do not fill gas tank while engine is

running. Do not operate if gasoline has been spilled.

Clean spilled gasoline before starting engine.

Do not operate near pilot light or open flame.

10. If the plugged in product operates abnormally

or unusually slow, immediately stop using the

Generator as a power source. Always read and

adhere to the instruction manual of the product

to be powered, to make sure that it can be safely

and efficiently powered by a portable generator.

11. Before connecting an appliance or power cord

to the Generator: Make sure that it is in good

working order. Faulty appliances or power cords

can create a potential for electrical shock.

12. Do not exceed the maximum power rating of the

Generator. Make sure that the total electrical rating

of the all of the tools or appliances plugged into

the Generator at the same time does not exceed

that of the Generator. Check that the startup

surge will not be beyond the limit of the Generator.

Power levels between rated and maximum

may be used for no more than 30 minutes.

13. Avoid substantially overloading which will

trip the circuit breaker. Exceeding the time

limit for maximum power operation or slightly

overloading the Generator may not switch the

circuit breaker or circuit protector OFF, but will

shorten the service life of the Generator.

14. Do not attempt to connect or disconnect

load connections while standing in

water, or on wet or soggy ground.

15. Do not touch electrically energized parts of

the Generator and interconnecting cables

or conductors with any part of the body, or

with any non-insulated conductive object.

16. Connect the Generator only to a load or

electrical system (120 volt or 240 volt) that is

compatible with the electrical characteristics

and rated capacities of the Generator.

Page 4 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

17. NK<@%YI6<=;E@C>F%

Test Ground Fault Circuit Interrupter (GFCI)

receptacles before each use as follows:

a. Disconnect all devices from the Generator.

b. Start the engine.

c. Press Test button on receptacle

to trip the GFCI device.

d. The Reset button should extend, cutting

off electricity to the receptacle.

e. If above test fails, do not use receptacle

until it is repaired or replaced.

f. Press Reset button in for use.

NK<@%(*4*/$,47*#%)"77%8&$%/(&$*4$%,3,"8#$%

*7*4$("4%#.&4`%"2%N*8*(,$&(%"#%8&$%3(&'89*91%%

Refer to Grounding on page 8.

18. Insulate all connections and disconnected wires.

19. Guard against electric shock. Prevent body

contact with grounded surfaces such as

pipes, radiators, ranges, and refrigerators.

20. Only use a suitable means of transport and

lifting devices with sufficient weight bearing

capacity when transporting the Generator.

21. Secure the Generator on transport vehicles to

prevent the tool from rolling, slipping, and tilting.

22. Industrial applications must follow

OSHA requirements.

23. Do not leave the Generator unattended when it is

running. Turn off the Generator (and remove safety

keys, if available) before leaving the work area.

24. The Generator engine can produce high noise

levels. Prolonged exposure to noise levels

above 85 dBA is hazardous to hearing. Always

wear ear protection when operating or working

around the gas engine while it is operating.

25. Wear ANSI-approved safety glasses,

hearing protection, and NIOSH-approved

dust mask/respirator during use.

26. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields

in close proximity to a heart pacemaker could

cause pacemaker interference or pacemaker

failure. Caution is necessary when near

the engine’s magneto or recoil starter.

27. Use only accessories that are recommended

by Harbor Freight Tools for your model.

Accessories that may be suitable for one

piece of equipment may become hazardous

when used on another piece of equipment.

28. Do not operate in explosive atmospheres,

such as in the presence of flammable

liquids, gases, or dust. Gasoline-powered

engines may ignite the dust or fumes.

29. Keep grounded conductive objects, such as

tools, away from exposed, live electrical parts

and connections to avoid sparking or arcing.

These events could ignite fumes or vapors.

30. Stay alert, watch what you are doing and

use common sense when operating this

piece of equipment. Do not use this piece

of equipment while tired or under the

influence of drugs, alcohol or medication.

31. Dress properly. Do not wear loose clothing or

jewelry. Keep hair, clothing and gloves away

from moving parts. Loose clothes, jewelry or

long hair can be caught in moving parts.

32. Parts, especially exhaust system components,

get very hot during use. Stay clear of hot parts.

33. Do not cover the Generator or its

engine during operation.

34. Keep the Generator, its engine, and

surrounding area clean at all times.

35. Do not smoke, or allow sparks, flames,

or other sources of ignition around the

equipment, especially when refuelling.

36. Use the Generator, accessories, etc., in

accordance with these instructions and in the

manner intended for the particular type of

equipment, taking into account the working

conditions and the work to be performed. Use of

the equipment for operations different from those

intended could result in a hazardous situation.

37. Do not operate the Generator with known

leaks in the engine’s fuel system.

38. WARNING: This product contains or, when

used, produces a chemical known to the State

of California to cause cancer and birth defects

or other reproductive harm. (California Health

& Safety Code § 25249.5, et seq.)

39. WARNING: This product contains di (2-ethylhexyl)

phthalate (DEHP), a chemical known to the State

of California to cause cancer and birth defects

or other reproductive harm. (California Health

& Safety Code § 25249.5, et seq.)

40. When spills of fuel or oil occur, they must be

cleaned up immediately. Dispose of fluids and

cleaning materials as per any local, state, or

federal codes and regulations. Store oil rags in

a bottom-ventilated, covered, metal container.

41. Keep hands and feet away from moving parts. Do

not reach over or across Generator while operating.

42. Before use, check for misalignment or binding

of moving parts, breakage of parts, and any

other condition that may affect the Generator’s

operation. @2%9,5,3*9J%.,M*%$.*%N*8*(,$&(%

#*(M"4*9%+*2&(*%'#"831 Many accidents are

caused by poorly maintained equipment.

43. Use the correct generator for the application.

Do not modify the generator or its engine,

and do not use the generator for a

purpose for which it is not intended.

Page 5K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

F*(M"4*%Y(*4,'$"&8#

1. [*2&(*%#*(M"4*J%5,"8$*8,84*J%&(%47*,8"83-

a. ;8/7'3%,77%9*M"4*#%2(&5%$.*%N*8*(,$&(1

b. E'(8%$.*%*83"8*%#)"$4.%$&%"$#%aCKKb%/&#"$"&81

c. =77&)%$.*%*83"8*%$&%4&5/7*$*7H%4&&71

d. E.*8J%(*5&M*%$.*%#/,(`%/7'3%

4,/%2(&5%$.*%#/,(`%/7'31

2. Keep all safety guards in place and in

proper working order. Safety guards include

muffler, air cleaner, mechanical guards,

and heat shields, among other guards.

3. Make sure the Engine Switch is in its “OFF”

position before moving the Generator and

before performing any service, maintenance,

or cleaning procedures on the unit.

4. Keep all electrical equipment clean and dry.

Replace any wiring where the insulation is

cracked, cut, abraded, or otherwise degraded.

Replace terminals that are worn, discolored, or

corroded. Keep terminals clean and tight.

5. L&%8&$%,7$*(%&(%,9O'#$%,8H%/,($%&2%$.*%

*S'"/5*8$%&(%"$#%*83"8*%$.,$%"#%#*,7*9%+H%$.*%

5,8'2,4$'(*(%&(%9"#$("+'$&(1%%C87H%,%S',7"2"*9%

#*(M"4*%$*4.8"4",8%5,H%,9O'#$%/,($#%$.,$%5,H%

"84(*,#*%&(%9*4(*,#*%3&M*(8*9%*83"8*%#/**91

6. Wear ANSI-approved safety goggles,

heavy-duty work gloves, and dust

mask/respirator during service.

7. Maintain labels and nameplates on

the equipment. These carry important

information. If unreadable or missing, contact

Harbor Freight Tools for a replacement.

8. Have the equipment serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the equipment

is maintained. Do not attempt any service or

maintenance procedures not explained in this

manual or any procedures that you are uncertain

about your ability to perform safely or correctly.

9. Store equipment out of the reach of children.

10. Follow scheduled engine and

equipment maintenance.

NK<@%Y(&$*4$"&8-

This Generator is equipped with two 3-Prong,

duplex 120 V ground fault circuit interrupter

(GFCI) receptacles. These outlets provide

additional protection from the risk of electric

shock. Should replacement of the receptacles

become necessary, use only identical replacement

parts that include GFCI protection.

I*2'*7"83-

1. Do not refill the fuel tank while the

engine is running or hot.

2. Do not smoke, or allow sparks, flames,

or other sources of ignition around the

equipment, especially when refuelling.

3. EC%YI6!6>E%K;6A%A6=?=N6%=>L%K@I6%

P=_=ILJ%L&%8&$%&M*(2"77%)"$.%2'*71%K"77%)"$.%

2'*7%,44&(9"83%$&%$.*%K'*7%A*M*7%"82&(5,$"&8%

+*7&)%$.*%F/*4"2"4,$"&8%4.,($%2&(%H&'(%5&9*71

4. Do not fill fuel tank to the top. Leave a little

room for the fuel to expand as needed.

5. Refuel in a well-ventilated area only.

6. Wipe up any spilled fuel and allow excess

to evaporate before starting engine.

E&%/(*M*8$%K@I6J%9&%8&$%#$,($%$.*%*83"8*%

)."7*%$.*%#5*77%&2%2'*7%.,83#%"8%$.*%,"(1

[,$$*(H%F*(M"4*-

1. Servicing of batteries are to be performed or

supervised by personnel knowledgeable of

batteries and the required precautions. Keep

unauthorized personnel away from batteries.

2. When replacing batteries, use the following type

batteries: 12 V, 9 Ah sealed, lead-acid type.

3. CAUTION – Do not dispose of battery or batteries

in a fire. The battery is capable of exploding.

4. CAUTION – Do not open or mutilate the battery.

Released electrolyte has been known to be

harmful to the skin and eyes and to be toxic.

5. CAUTION – A battery presents a risk of high

short circuit current. The following precautions

are to be observed when working on batteries:

a. Remove watches, rings, or other metal objects.

b. Use tools with insulated handles.

c. Do not lay tools or metal parts on top of batteries.

%F=!6%EP6F6%@>FEI;<E@C>F1

Page 6 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

K'84$"&8,7%L*#4("/$"&8

F/*4"2"4,$"&8#

Generator

Output 120 / 240 VAC, 60 Hz

7,000 Running Watts (8,750 Peak Watts)

Battery needed for electric start

(not included) 12 V, lead acid, 9 Ah

Electrical Receptacle

Two 3-Prong, duplex NEMA #5-20 120 V GFCI

One 3-Prong, NEMA #L5-20 twistlock 120 V

One 4-Prong, NEMA #L14-30 twistlock 120 V / 240 V

One DC Outlet 12 VDC

Engine

Displacement 420 cc

Engine Type Horizontal Single Cylinder 4 stroke OHV

Cooling System Forced air cooled

Fuel Type 87+ octane stabilizer treated unleaded gasoline

Capacity 6.6 Gallons (25 L)

Engine Oil Type SAE 10W – 30 above 32° F

5W – 30 at 32° F or below

Capacity 1.16 Quart (1.1 L)

Spark Plug Type NHSP® / Torch® F6TC

Gap 0.028" – 0.031"

Valve Clearance Intake 0.004" – 0.006"

Exhaust 0.006" – 0.008"

Run Time @ 50% load 12 hr.

Operational Volume 76 dB

Available accessories Wheel kit (sold separately)

The emission control system for this Generator’s Engine is warranted for standards set by the U.S. Environmental

Protection Agency and by the California Air Resources Board (also known as CARB). For warranty information,

refer to the last pages of this manual.

<&5/&8*8$#%,89%<&8$(&7#

Fuel Cap

Frame

Starter

Handle

DC Circuit Breaker

Fuel Valve

Power Switch

AC Circuit Breakers

Choke

Low Oil Indicator

GFCI AC Receptacles

Air Filter

DC Receptacle

Ground Terminal

AC Receptacles

Page 7K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

<&5/&8*8$#%,89%<&8$(&7#%\4&8$"8'*9]

The following are descriptions of the controls

on the power panel. Your Generator has

sockets to power your products with circuit

breakers to protect the voltage flow.

FE=IE

683"8*%F)"$4.-%%Used to start and stop the Engine.

2. =<%I*4*/$,47*#-%%The Generator contains several

AC Receptacles to power tools and equipment.

I6F6E

E6FE

I6F6E

E6FE

cTY(&83J%9'/7*G%%

Qde%M&7$%NK<@%(*4*/$,47*%%

\>6D=%fVTde]%

b. cTY(&83J%$)"#$7&4`J%%

Qde%M&7$%(*4*/$,47*%

\>6D=%fAVTde]%

c. gTY(&83J%$)"#$7&4`J%%

Qde0dge%M&7$%(*4*/$,47*%

\>6D=%fAQgTce]

Z=I>@>Nh%%Connect tools and equipment

only to the Receptacle (120 volt or 240 volt)

that is compatible with the electrical

characteristics and rated capacities of

the tools and equipment being used.

CKK

<"(4'"$%[(*,`*(#-%The circuit breaker protects

the Generator from overloading. The rating of the

breaker and the load it protects are marked near

the breaker. Should any of the Circuit Breakers trip,

the Generator will stop the electricity output. If this

happens, unplug all loads from the Generator.

Allow the Generator to cool down. Then, press

the tripped Circuit Breaker, restart the Engine, and

re-attach loads.

4. Qd%!L<%I*4*/$,47*-%12 VDC Receptacle provides

a power source for 12 volt DC items.

5. N(&'89"83%E*(5"8,7-%%Prior to each use, set

up the ground wire (not included) connection to

the Grounding Terminal to properly ground the

Generator. Refer to Grounding on page 8

for instructions on grounding the Generator.

Page 8 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

@8"$",7%E&&7%F*$%;/0=##*5+7H

% I*,9%$.*%6>E@I6%@DYCIE=>E%F=K6EB%@>KCID=E@C>%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*G$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

EC%YI6!6>E%F6I@C;F%@>i;IB-%

C/*(,$*%&87H%)"$.%/(&/*(%#/,(`%,((*#$&(%"8#$,77*91

C/*(,$"&8%&2%$."#%*S'"/5*8$%5,H%4(*,$*%#/,(`#%$.,$%4,8%#$,($%2"(*#%,(&'89%9(H%M*3*$,$"&81%

=%#/,(`%,((*#$&(%5,H%+*%(*S'"(*91%E.*%&/*(,$&(%#.&'79%4&8$,4$%7&4,7%2"(*%,3*84"*#%

2&(%7,)#%&(%(*3'7,$"&8#%(*7,$"83%$&%2"(*%/(*M*8$"&8%(*S'"(*5*8$#1

At high altitudes, the engine’s carburetor, governor, and any other parts that control the fuel-

air ratio will need to be adjusted by a qualified mechanic to allow efficient high-altitude use

and to prevent damage to the engine and any other devices used with this product.

>&$*- For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

[,$$*(H%F*$'/%@8#$('4$"&8#

All generators can be started using the recoil method. This Generator requires installation of a

battery to operate the electric start feature. Connect the battery to the Generator engine:

1. Place a fully charged, lead-acid 12 V, 9 Ah battery (not included) in the battery holder on the Generator.

2. Bolt in place using the hardware included with the Generator.

3. Attach the positive (red) cable connector from the engine

to the Positive Terminal on the battery. Connect cable

securely to prevent disconnection and short circuits.

4. Attach the negative (black) cable connector to the negative battery terminal.

N(&'89"83

The Generator must be properly grounded before use. Have the unit grounded

by a qualified electrician if you are not qualified to do so.

To ground the Generator, connect a #6 AWG grounding wire (not included) from the

Grounding Terminal on the Control Panel to a grounding rod (not included) that has been

driven at least 24 inches deep into the earth. The grounding rod must be an earth-driven

copper or brass rod (electrode) which can adequately ground the Generator.

Z=I>@>Nh NK<@%(*4*/$,47*#%)"77%8&$%/(&$*4$%2(&5%*7*4$("4%#.&4`%"2%N*8*(,$&(%"#%8&$%3(&'89*91

>CE@<6- This Generator is not intended to power sensitive electronic equipment without the addition of an

appropriate line conditioner and surge protector (both not included). F*8#"$"M*%*7*4$(&8"4%*S'"/5*8$%"847'9*#J%

+'$%"#%8&$%7"5"$*9%$&J%,'9"&0M"9*&%*S'"/5*8$J%#&5*%$*7*M"#"&8%#*$#J%4&5/'$*(#J%,89%/("8$*(#1%%Sensitive

electronic equipment should be operated on approved inverter-type generators or pure sine wave generators.

>&$*- Wheel Kit, #68531 (sold separately) can be used with this Generator.

Positive

Connector

Negative

Connector

Hardware

Battery

Page 9K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

P"3.%=7$"$'9*%C/*(,$"&8%=+&M*%ceee%2**$

Z=I>@>Nh EC%YI6!6>E%F6I@C;F%@>i;IB%KICD%K@I6-

Follow instructions in a well-ventilated area away from ignition sources.

If the engine is hot from use, shut the engine off and wait for it to cool before proceeding. Do not smoke.

>CE@<6 Warranty void if necessary adjustments are not made for high altitude use.

At high altitudes, the engine’s carburetor, governor, and any other parts that control the fuel-air ratio will need

to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to the engine

and any other devices used with this product. The fuel system on this engine may be influenced by operation

at higher altitudes. Proper operation can be ensured by installing an altitude kit at altitudes higher than 3000 ft.

above sea level. At elevations above 8000 ft, the engine may experience decreased performance, even with

the proper main jet. Operating this engine without the proper altitude kit installed may increase the engine’s

emissions and decrease fuel economy and performance. The kit should be installed by a qualified mechanic.

1. Turn off the engine.

2. Close the fuel valve.

3. Place a bowl under the fuel cup to catch any spilled fuel.

<=;E@C>h Carburetor bowl may have gas in it which will leak upon removing the bolt.

4. Unthread the bolt holding the fuel cup.

5. Remove the bolt, Bolt Seal, fuel cup, Fuel Cup Seal and Main Jet from the body of the carburetor assembly.

A carburetor screwdriver (not included) is needed to remove and install the Main Jet.

>&$*- The mixing tube is held in place by the Main Jet and might fall out when it is removed.

If it falls out, replace it in the same orientation before replacing the Main Jet.

6. Replace the Main Jet with the replacement Main Jet needed for your altitude range (part 1a or 2a).

>&$*- The Fuel Cup Seal and Bolt Seal may be damaged during removal

and should be replaced with the new ones from the kit.

7. Replace the Fuel Cup Seal (4a), fuel cup, Bolt Seal (3a), and bolt. Tighten in place.

>CE@<6- Do not cross thread bolt when tightening.

Finger tighten first and then use a wrench to make sure the bolt is properly threaded.

8. Wipe up any spilled fuel and allow excess to evaporate

before starting engine. To prevent FIRE, do not start

the engine while the smell of fuel hangs in the air.

P"3.%=7$"$'9*%?"$%Y,($#%A"#$%T%=

Y,($ L*#4("/$"&8 j$H

1a Main Jet 3000-6000 ft. 1

2a Main Jet 6000-8000 ft. 1

3a Bolt Seal 1

4a Fuel Cup Seal 1

<,(+'(*$&(%

=##*5+7H

D,"8%i*$

K'*7%<'/%F*,7

D"G"83%E'+*

\5"3.$%(*5,"8%

"8#"9*%4,(+'(*$&(]

K'*7%<'/

[&7$%F*,7

[&7$

Page 10 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

C/*(,$"83%@8#$('4$"&8#

% I*,9%$.*%6>E@I6%@DYCIE=>E%F=K6EB%@>KCID=E@C>%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*G$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

@8#/*4$%$&&7%+*2&(*%'#*J%7&&`"83%2&(%9,5,3*9J%7&&#*J%,89%5"##"83%/,($#1%%

@2%,8H%/(&+7*5#%,(*%2&'89J%9&%8&$%'#*%$&&7%'8$"7%(*/,"(*91

N*8*(,$&(%Y(*TF$,($%<.*4`#

Inspect engine and equipment, looking for

damaged, loose, and missing parts before set

up and starting. If any problems are found,

do not use equipment until fixed properly.

<.*4`"83%,89%K"77"83%683"8*%C"7

<=;E@C>h B&'(%Z,((,8$H%"#%!C@L%"2%$.*%*83"8*k#%

4(,8`4,#*%"#%8&$%/(&/*(7H%2"77*9%)"$.%&"7%+*2&(*%

*,4.%'#*1%%[*2&(*%*,4.%'#*J%4.*4`%$.*%&"7%7*M*71%%

L&%8&$%('8%$.*%*83"8*%)"$.%7&)%&(%8&%*83"8*%

&"71%%I'88"83%$.*%*83"8*%)"$.%8&%&(%7&)%*83"8*%

&"7%Z@AA%/*(5,8*8$7H%9,5,3*%$.*%*83"8*1

1. Make sure the engine is stopped and is level.

2. Close the Fuel Valve.

3. Clean the top of the Dipstick and the

area around it. Remove the Dipstick

by threading it counterclockwise, and

wipe it off with a clean lint free rag.

Full level

Reinsert the Dipstick without threading it in and

remove it to check the oil level. The oil level

should be up to the full level as shown above.

5. If the oil level is at or below the low mark add the

appropriate type of oil until the oil level is at the

proper level. SAE 10W-30 oil is recommended

for general use. (The SAE Viscosity Grade chart

on page 17 in the Service section shows other

viscosities to use in different average temperatures.)

6. Thread the dipstick back in clockwise.

<=;E@C>h Do not run the engine with too little oil.

The engine will be permanently damaged.

<.*4`"83%,89%K"77"83%K'*7

Z=I>@>Nh EC%YI6!6>E%F6I@C;F%

@>i;IB%KICD%K@I6-

Fill the fuel tank in a well-ventilated area

away from ignition sources. If the engine is

hot from use, shut the engine off and wait

for it to cool before adding fuel.

Do not smoke.

1. Clean the Fuel Cap and the area around it.

2. Unscrew and remove the Fuel Cap.

3. If needed, fill the Fuel Tank to about 1 inch

under the fill neck with 87 octane or higher

unleaded gasoline that has been treated with

a fuel stabilizer additive. Follow fuel stabilizer

manufacturer’s recommendations for use.

>&$*-%%L&%8&$%'#*%3,#&7"8*%4&8$,"8"83%5&(*%$.,8%

Qel%*$.,8&7%\6Qe]1%%L&%8&$%'#*%6UV%*$.,8&71

>&$*-%%L&%8&$%'#*%3,#&7"8*%$.,$%.,#%+**8%#$&(*9%"8%,%

5*$,7%2'*7%4&8$,"8*(%&(%,%9"($H%2'*7%4&8$,"8*(1%%@$%4,8%

4,'#*%/,($"47*#%$&%*8$*(%$.*%4,(+'(*$&(J%*22*4$"83%

*83"8*%/*(2&(5,84*%,890&(%4,'#"83%9,5,3*1

4. Then replace the Fuel Cap.

5. Wipe up any spilled fuel and allow excess

to evaporate before starting engine. To

prevent FIRE, do not start the engine while

the smell of fuel hangs in the air.

Page 11K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

;#"83%$.*%N*8*(,$&(

[*2&(*%F$,($"83%$.*%N*8*(,$&(%683"8*

[*2&(*%#$,($"83%$.*%*83"8*-

a. K&77&)%$.*%F*$%;/%@8#$('4$"&8#%

$&%/(*/,(*%$.*%N*8*(,$&(1

b. ;8/7'3%,77%7&,9#%2(&5%$.*%N*8*(,$&(1

c. @8#/*4$%$.*%N*8*(,$&(%,89%*83"8*1

d. K"77%$.*%*83"8*%)"$.%$.*%/(&/*(%

,5&'8$%,89%$H/*%&2%+&$.%

#$,+"7"m*(T$(*,$*9%2'*7%,89%&"71

[,#"4%N*8*(,$&(%;#*%Y(&4*9'(*%T%F**%

2&77&)"83%/,3*#%2&(%#/*4"2"4%"8#$('4$"&8#

1. Check that the Generator can handle the

wattage needed to power your products.

2. Start the Engine, and allow the Engine and

Generator to run and warm up for five minutes

after starting with no electrical load.

3. With the engine running, test GFCI

receptacles before each use as follows:

a. Press Test button on receptacle

to trip the GFCI device.

b. The Reset button should extend, cutting

off electricity to the receptacle.

c. If above test fails, do not use receptacle

until it is repaired or replaced.

d. Press Reset button in for use.

I6F6E

E6FE

I6F6E

E6FE

I*#*$%

['$$&8

E*#$%

['$$&8

Qde%!&7$%NK<@%I*4*/$,47*

4. Plug in products.

5. When finished using the Generator,

disconnect all electrical loads.

>&$*- Do not allow Generator to run

out of fuel with loads attached.

6. Turn off the Engine.

7. Allow the Generator and its Engine to

completely cool. Then store the unit in a

clean, dry, safe location out of reach of

children and other unauthorized people.

@DYCIE=>E- After starting the engine, allow it to

run at no load for five minutes with no load after

each start-up so that the engine can stabilize.

8. Break-in Period:

a. Breaking-in the engine will help to ensure

proper equipment and engine operation.

b. The operational break-in period will last

about 3 hours of use. During this period:

• Do not apply a heavy load to the equipment.

c. The maintenance break-in period will last

about 20 hours of use. After this period:

• Change the engine oil.

Under normal operating conditions

subsequent maintenance follows the schedule

explained in the SERVICE section.

Page 12 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

F$,($"83%$.*%683"8*

1. To start a cold engine, move the Choke to the

CHOKE position.

To restart a warm engine, leave the Choke in the

RUN position.

2. Open the Fuel Valve.

4. Allow the Engine to run for several seconds. Then,

if the Choke lever is in the CHOKE position, move

the Choke Lever very slowly to its RUN position.

>&$*- Moving the Choke Lever too

fast could stall the engine.

@DYCIE=>E- Allow the engine to run at no load for five minutes with no

load after each start-up so that the engine can stabilize.

K&(%D=>;=A%FE=IE

=1 Turn the Engine Switch to ON.

[1 Grip the Starter Handle of the Engine

loosely and pull it slowly several times to

allow the gasoline to flow into the

Engine’s carburetor. Then pull the Starter

Handle gently until resistance is felt.

Allow Cable to retract fully and then pull

it quickly. Repeat until the engine starts.

Note: Do not let the Starter Handle snap

back against the engine. Hold it as it

recoils so it doesn't hit the engine.

FE=IE

K&(%6A6<EI@<%FE=IE%

Turn the Engine Switch to START.

>&$*- To prolong starter life, use

short starting cycles (5 seconds

maximum). Then wait one minute

before attempting to start again.

ST AR T

FE=IE

Page 13K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

<&88*4$"83%67*4$("4,7%A&,9#

Familiarize yourself with the engine controls, power panel and how to start the engine before using the

Generator. Calculate the wattage of the products you will use with the Generator and verify that the Generator

can handle the total load.

Z=I>@>Nh%%Connect only properly wired plugs

to the Generator. A plug that is spliced onto a

different cord may be hazardous. Only a qualified

electrician should wire a plug onto a cord.

<=;E@C>h%%Never exceed the rated capacity for this

Generator, as serious damage to the Generator and/or

appliances, tools, and equipment could result from an overload.

Starting and running wattage requirements should always

be calculated when matching this Generator’s wattage capacity to the appliance, tool, or equipment.

Use the DC12 V Receptacle to power 12 VDC equipment.

Z=I>@>Nh%Do not charge batteries without a proper charge controller. Do not overcharge.

a. Connect the items that require the most wattage first.

b. Connect “inductive” load appliances, tools, and equipment next. Inductive

loads are small hand tools and some small appliances.

c. Connect any lights next.

d. Voltage sensitive appliances, tools, and equipment should be the last to be connected to the Generator.

Plug voltage sensitive items such as TVs, DVD players, microwaves, and cordless telephones into a UL®

Listed voltage surge protector (not included). Then, connect the surge protector into the Generator.

@DYCIE=>Eh Failure to connect and operate appliances, tools, and equipment in this sequence can cause

damage to the Generator, appliances, tools, and equipment and will M&"9%the Warranty of this Generator.

>&$*-%%If Engine speed or voltage fluctuates with a load below the Generator’s running watts, move the Engine

Choke Lever to the position.

6M*87H%9"#$("+'$*9%

&M*(%&'$7*$#-

@K%=>B%<@I<;@E%[I6=?6IF%EI@Y%<P6<?%EP6%KCAACZ@>N-

1. Make sure that ALL circuit breakers are reset

before starting the Generator again.

2. Adjust the plugs so the loads are

shared across outlet circuits.

E&%,4."*M*%(,$*9%&'$/'$%2(&5%$.*%N*8*(,$&(J%

9"#$("+'$*%7&,9#%&M*(%&'$7*$#1

000

400

200

1,200

E&$,7%I'88"83%Z,$$#%

\5'#$%+*%7*##%$.,8%cJdee]4,200

A,(3*#$%=99"$"&8,7%F$,($T'/%Z,$$#1,200

7F$

,($'/%Z,$$#%8**9*9%2&(%,77%7&,9#%

\5'#$%+*%7*##%$.,8%gJeee]5,400

Must b e

Less than

8,750

Must b e

Less than

7,000

Page 14 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

Before using the Generator, check that the products

you want to plug into the unit are below the rated and

maximum wattage ratings of the Generator. Use the

Wattage Calculation Table below, and the watts listed

on your products, to help calculate multiple

wattage totals.

E&%'#*%$.*%$,+7*-

1. Add up the Running Watts for all items you

would like to use at any given time

2. Make sure that this total is under the 7,000

running wattage of the Generator.

3. Find the single highest starting watts for

the selected items and add to the total.

4. Make sure that this total is under the

8,750 peak wattage of the Generator.

5. Plug in and turn on products from largest wattage

to smallest.

6G,5/7*

6S'"/5*8$ I'88"83

Z,$$#

E&$,7%I'88"83%Z,$$#%%

\5'#$%+*%7*##%$.,8%WJeee]

A,(3*#$%=99"$"&8,7%F$,($T'/%Z,$$#

E&$,7%F$,($'/%Z,$$#%8**9*9%2&(%,77%7&,9#%

\5'#$%+*%7*##%$.,8%UJWVe]

Z,$$,3*%<,74'7,$"&8%E,+7*

6S'"/5*8$ I'88"83

Z,$$#

E&$,7%I'88"83%Z,$$#%%

\5'#$%+*%7*##%$.,8%WJeee]

A,(3*#$%=99"$"&8,7%F$,($T'/%Z,$$#

E&$,7%F$,($'/%Z,$$#%8**9*9%2&(%,77%7&,9#%

\5'#$%+*%7*##%$.,8%UJWVe]

A generator that is rated more than the minimum

required peak watts will last much longer than a

generator that only supplies the exact watts needed.

E&%<,74'7,$*%Z,$$,3*

Volts and amps can be multiplied together to get watts

(volts x amps = watts).

E&%<,74'7,$*%=99"$"&8,7%F$,($T;/%Z,$$#%%

\@2%E.*H%=(*%>&$%A"#$*9]%

For equipment with a motor: Use the rated watts

amount as an estimate of additional Start-up Watts.

For most lights or heaters:

there are no additional start-up watts.

<,74'7,$"83%E&$,7%Z,$$,3*%&2%L*M"4*#%;#*9%)"$.%$.*%N*8*(,$&(

iC[%F@E6

L*M"4* I'88"83%

Z,$$#

=99"$"&8,7%

F$,($T'/%

Z,$$#

Air Compressor - 1/2 HP 1000 1000

Table Saw - 10" 1700 1300

Belt Sander - 3" 1200 1200

Hand Drill - 1/2" 600 600

Halogen Work Light 1000 0

Recipricating Saw 900 900

PC;F6PCAL

L*M"4* I'88"83%

Z,$$#

=99"$"&8,7%

F$,($T'/%

Z,$$#

Computer w/ Monitor 800 0

Electric Clothes Dryer 5500 500

Electric Range 2100 0

Electric Water Heater 2000 0

Light Bulb - 100 watts 100 0

Microwave - 1000 watts 1000 200

Sump Pump - 1/2 HP 1000 1100

Television 400 0

Washing Machine 1100 1100

Well Pump - 1/2 HP 1000 1000

I6<I6=E@C>

L*M"4* I'88"83%

Z,$$#

=99"$"&8,7%

F$,($T'/%

Z,$$#

AM/FM Radio 100 0

Electric Grill 1700 0

Inator Pump 50 100

CD/DVD Player 100 0

Box Fan - 20" 200 200

Coffee Maker 600 0

A=Z>%n%N=IL6>

L*M"4* I'88"83%

Z,$$#

=99"$"&8,7%

F$,($T'/%

Z,$$#

Hedge Trimmer 400 400

Pressure Washer 1200 1200

Lawn Mower 1200 1200

Edger 1000 1000

P6=E@>N%n%<CCA@>N

L*M"4* I'88"83%

Z,$$#

=99"$"&8,7%

F$,($T'/%

Z,$$#

Central AC - 10,000 BTU 1500 1500

Furnace Fan - 1/2 HP 900 1400

Space Heater 1800 0

Window AC - 10,000 BTU 1200 600

6D6IN6><B

L*M"4* I'88"83%

Z,$$#

=99"$"&8,7%

F$,($T'/%

Z,$$#

Refrigerator/Freezer 700 1500

Radio 100 0

Z,$$,3*%6#$"5,$*%<.,($#

>&$*- Wattages listed below are estimates for that type

of equipment only. Check nameplate wattages on all

loads before connecting to Generator.

Page 15K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

F$&//"83%$.*%683"8*%"8%,8%65*(3*84H

1. To stop the engine in an emergency,

turn the Engine Switch off.

>CE@<6- Generator shut-off under load may damage

the Generator and attached equipment.

F$&//"83%$.*%683"8*%;89*(%>&(5,7%<&89"$"&8#%

1. Before turning off the Engine,

turn off all electrical loads,

then unplug them.

2. Turn the Engine Switch off.

3. Close the Fuel Valve.

FE=IE

CKK

I6F6E

E6FE

I6F6E

E6FE

FE=IE

CKK

Page 16 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

;#*(TD,"8$*8,84*%@8#$('4$"&8#

%Y(&4*9'(*#%8&$%#/*4"2"4,77H%*G/7,"8*9%"8%$."#%5,8',7%5'#$%

+*%/*(2&(5*9%&87H%+H%,%S',7"2"*9%$*4.8"4",81

EC%YI6!6>E%F6I@C;F%@>i;IB%KICD%=<<@L6>E=A%CY6I=E@C>-%

E'(8%$.*%Y&)*(%F)"$4.%&2%$.*%N*8*(,$&(%$&%"$#%aCKKb%/&#"$"&8J%),"$%2&(%$.*%*83"8*%$&%4&&7J%,89%9"#4&88*4$%

$.*%#/,(`%/7'3%4,/%+*2&(*%/*(2&(5"83%,8H%"8#/*4$"&8J%5,"8$*8,84*J%&(%47*,8"83%/(&4*9'(*#1

EC%YI6!6>E%F6I@C;F%@>i;IB%KICD%6j;@YD6>E%K=@A;I6-%

L&%8&$%'#*%9,5,3*9%*S'"/5*8$1%%@2%,+8&(5,7%8&"#*J%M"+(,$"&8J%&(%*G4*##%

#5&`"83%&44'(#J%.,M*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1

K&77&)%,77%#*(M"4*%"8#$('4$"&8#%"8%$."#%5,8',71%%E.*%*83"8*%5,H%2,"7%4("$"4,77H%"2%8&$%#*(M"4*9%/(&/*(7H1

D,8H%5,"8$*8,84*%/(&4*9'(*#J%"847'9"83%,8H%8&$%9*$,"7*9%"8%$."#%5,8',7J%)"77%8**9%$&%+*%

/*(2&(5*9%+H%,%S',7"2"*9%$*4.8"4",8%2&(%#,2*$H1%%@2%H&'%.,M*%,8H%9&'+$#%,+&'$%H&'(%,+"7"$H%$&%#,2*7H%

#*(M"4*%$.*%*S'"/5*8$%&(%*83"8*J%.,M*%,%S',7"2"*9%$*4.8"4",8%#*(M"4*%$.*%*S'"/5*8$%"8#$*,91

<7*,8"83J%D,"8$*8,84*J%,89%A'+("4,$"&8

>&$*- This maintenance schedule is intended solely as a general guide. If performance decreases or if

equipment operates unusually, check systems immediately. The maintenance needs of each piece of equipment

will differ depending on factors such as duty cycle, temperature, air quality, fuel quality, and other factors.

>&$*- The following procedures are in addition to the regular checks and maintenance

explained as part of the regular operation of the engine and equipment.

Y(&4*9'(* [*2&(*%

6,4.%;#*

D&8$.7H%&(%

*M*(H%de%

.(1%&2%'#*

6M*(H%c%5&1%&(%

Ve%.(1%&2%'#*

6M*(H%R%5&1%&(%

Qee%.(1%&2%'#*%

B*,(7H%&(%%

*M*(H%cee%

.(1%&2%'#*

6M*(H%

d%B*,(#

Brush off outside of engine

Check engine oil level

Check air cleaner

Check deposit cup

Change engine oil

Clean/replace air cleaner *

Check and clean spark plug

1. Check/adjust idle speed

2. Check/adjust valve clearance

3. Clean fuel tank, strainer

and carburetor

4. Clean carbon build-up from

combustion chamber

** **

Replace fuel line if necessary **

*Service more frequently when used in dusty areas.

**These items should be serviced by a qualified technician.

Page 17K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

<.*4`"83%,89%K"77"83%K'*7

Z=I>@>Nh EC%YI6!6>E%F6I@C;F%

@>i;IB%KICD%K@I6-

Fill the fuel tank in a well-ventilated area

away from ignition sources. If the engine is

hot from use, shut the engine off and wait

for it to cool before adding fuel.

Do not smoke.

1. Clean the Fuel Cap and the area around it.

2. Unscrew and remove the Fuel Cap.

>&$*- L&%8&$%'#*%3,#&7"8*%4&8$,"8"83%5&(*%$.,8%

Qel%*$.,8&7%\6Qe]1%%L&%8&$%'#*%6UV%*$.,8&71

>&$*-%%L&%8&$%'#*%3,#&7"8*%$.,$%.,#%+**8%#$&(*9%"8%,%

5*$,7%2'*7%4&8$,"8*(%&(%,%9"($H%2'*7%4&8$,"8*(1%%@$%4,8%

4,'#*%/,($"47*#%$&%*8$*(%$.*%4,(+'(*$&(J%*22*4$"83%

*83"8*%/*(2&(5,84*%,890&(%4,'#"83%9,5,3*1

3. If needed, fill the Fuel Tank to about 1 inch

under the fill neck with 87 octane or higher

unleaded gasoline that has been treated with

a fuel stabilizer additive. Follow fuel stabilizer

manufacturer’s recommendations for use.

4. Replace the Fuel Cap.

5. Wipe up any spilled fuel and allow excess

to evaporate before starting engine. To

prevent FIRE, do not start the engine while

the smell of fuel hangs in the air.

683"8*%C"7%<.,83*

<=;E@C>h Oil is very hot during operation and can

cause burns. Wait for engine to cool before changing oil.

1. Make sure the engine is stopped and is level.

2. Close the Fuel Valve.

3. Place a drain pan (not included) underneath

the crankcase’s drain plug.

4. Remove the drain plug and, if possible,

tilt the crankcase slightly to help drain

the oil out. Recycle used oil.

5. Replace the drain plug and tighten it.

6. Clean the top of the Dipstick and the

area around it. Remove the Dipstick

by threading it counterclockwise, and

wipe it off with a clean lint free rag.

Full level

Add the appropriate type of oil until the

oil level is at the full level. SAE 10W-30

oil is recommended for general use.

>&$*- Do not thread the dipstick in

when checking the oil level.

The SAE Viscosity Grade chart shows other

viscosities to use in different average temperatures.

QeZTce

VZTce

-20 0 20 40 60 80 100°F

F=6%!"#4&#"$H%N(,9*#

=M*(,3*%&'$9&&(%$*5/*(,$'(*

8. Thread the dipstick back in clockwise.

<=;E@C>h Do not run the engine with too little oil.

The engine will be permanently damaged.

="(%K"7$*(%67*5*8$%D,"8$*8,84*

1. Remove the air filter cover and the air filter elements

and check for dirt. Clean as described below.

2. <7*,8"83-

• For “paper” filter elements:

To prevent injury from dust and debris,

wear ANSI-approved safety goggles,

NIOSH-approved dust mask/respirator, and

heavy-duty work gloves. In a well-ventilated

area away from bystanders, use pressurized

air to blow dust out of the air filter. If this does

not get the filter clean, replace it.

Page 18 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

• For foam filter elements:

Wash the element in warm water and

mild detergent several times. Rinse.

Squeeze out excess water and allow it to dry

completely. Soak the filter in lightweight oil

briefly, then squeeze out the excess oil.

3. Install the cleaned filter. Secure the

Air Cleaner Cover before use.

F/,(`%Y7'3%D,"8$*8,84*

1. Disconnect spark plug cap from end of plug.

Clean out debris from around spark plug.

2. Using a spark plug

wrench, remove

the spark plug.

3. Inspect the spark

plug:

If the electrode is

oily, clean it using

a clean, dry rag.

If the electrode

has deposits

on it, polish it using emery paper. If the

white insulator is cracked or chipped, the

spark plug needs to be replaced.

>CE@<6- Using an incorrect spark plug may

damage the engine. See the Specifications chart

for your Generator for the type and gap required.

4. When installing a new spark plug, adjust

the plug’s gap to the specification on the

Specifications chart. Do not pry against the

electrode, the spark plug can be damaged.

5. Install the new spark plug or the cleaned spark plug

into the engine. Gasket-style: Finger-tighten until

the gasket contacts the cylinder head, then about

1/2-2/3 turn more.

Non-gasket-style: Finger-tighten until the plug

contacts the head, then about 1/16 turn more.

>CE@<6- Tighten the spark plug properly.

If loose, the spark plug will cause the engine

to overheat. If overtightened, the threads

in the engine block will be damaged.

6. Apply dielectric spark plug boot protector

(not included) to the end of the spark

plug and reattach the wire securely.

F$&(,3*

When the equipment is to remain idle for longer than

20 days, prepare the Engine for storage as follows:

1. <A6=>@>N:

Wait for Engine to cool, then clean Engine with

dry cloth. >CE@<6- L&%8&$%47*,8%'#"83%),$*(1

The water will gradually enter the Engine

and cause rust damage. Apply a thin coat

of rust preventive oil to all metal parts.

2. K;6A-

To protect the fuel tank during storage, fill the

tank with gasoline that has been treated with

a fuel stabilizer additive. Follow fuel stabilizer

manufacturer’s recommendations for use.

Refer to Checking and Filling Fuel on page

Checking and Filling Fuel on page 10.

Z=I>@>Nh EC%YI6!6>E%F6I@C;F%

@>i;IB%KICD%K@I6-

Fill tank in a well-ventilated area away from

ignition sources. If the engine is hot from

use, shut the engine off and wait for it to

cool before adding fuel. Do not smoke.

3. A;[I@<=E@C>-

a. Change engine oil.

b. Clean out area around spark plug.

Remove spark plug and pour one tablespoon of

engine oil into cylinder through spark plug hole.

c. Replace spark plug, but leave

spark plug cap disconnected.

d. Pull Starter Handle to distribute oil in cylinder.

Stop after one or two revolutions when you

feel the piston start the compression stroke

(when you start to feel resistance).

4. FECI=N6%=I6=-%

Cover and store in a dry, level, well-ventilated

area out of reach of children. Storage area should

also be away from ignition sources, such as

water heaters, clothes dryers, and furnaces.

>CE@<6- During extended storage periods the

Engine must be started every 3 months and allowed

to run for 15 – 20 minutes or the Warranty is VOID.

5. =KE6I%FECI=N6-%

Before starting the Engine during or after

storage, keep in mind that untreated gasoline

will deteriorate quickly. Drain the fuel

tank and change to fresh fuel if untreated

gasoline has been sitting for a month, if

treated gasoline has been sitting beyond the

fuel stabilizer’s recommended time period,

or if the Engine does not start.

<H7"89*(%

=##*5+7H

F/,(`%Y7'3%

Page 19K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

E(&'+7*#.&&$"83

Y(&+7*5 Y&##"+7*%<,'#*# Y(&+,+7*%F&7'$"&8#

Engine will not start FUEL RELATED:

1. No fuel in tank or fuel valve closed.

2. Choke not in CHOKE position, cold engine.

3. Gasoline with more than 10% ethanol used.

(E15, E20, E85, etc.)

4. Low quality or deteriorated, old gasoline.

5. Carburetor not primed.

6. Dirty fuel passageways.

7. Carburetor needle stuck. Fuel

can be smelled in the air.

8. Too much fuel in chamber. This can be

caused by the carburetor needle sticking.

9. Clogged Fuel Filter.

FUEL RELATED:

1. Fill fuel tank with fresh 87+ octane stabilizer

treated unleaded gasoline and open fuel

valve.%

L&%8&$%'#*%3,#&7"8*%)"$.%5&(*%$.,8%

Qel%*$.,8&7%\6QVJ%6deJ%6UVJ%*$41]1

2. Move Choke to CHOKE position.

3. Clean out ethanol rich gasoline from fuel

system. Replace components damaged by

ethanol. Use fresh 87+ octane stabilizer

treated unleaded gasoline only. %%

L&%8&$%'#*%3,#&7"8*%)"$.%5&(*%$.,8%

Qel%*$.,8&7%\6QVJ%6deJ%6UVJ%*$41]1

4. Use fresh 87+ octane stabilizer treated

unleaded gasoline.%

L&%8&$%'#*%3,#&7"8*%)"$.%5&(*%$.,8%

Qel%*$.,8&7%\6QVJ%6deJ%6UVJ%*$41]1

5. Pull on Starter Handle to prime.

6. Clean out passageways using fuel additive.

Heavy deposits may require further cleaning.

7. N*8$7H tap side of carburetor oat

chamber with screwdriver handle.

8. Turn Choke to RUN position. Remove spark

plug and pull the start handle several times

to air out the chamber. Reinstall spark

plug and set Choke to CHOKE position.

9. Replace Fuel Filter.

IGNITION (SPARK) RELATED:

1. Spark plug cap not connected securely.

2. Spark plug electrode wet or dirty.

3. Incorrect spark plug gap.

4. Spark plug cap broken.

5. Circuit breaker tripped (electric

start models only).

6. Incorrect spark timing or

faulty ignition system.

IGNITION (SPARK) RELATED:

1. Connect spark plug cap properly.

2. Clean spark plug.

3. Correct spark plug gap.

4. Replace spark plug cap.

5. Reset circuit breaker. Check wiring and

starter motor if breaker continues to trip.

6. Have qualied technician diagnose/

repair ignition system.

COMPRESSION RELATED:

1. Cylinder not lubricated. Problem after long

storage periods.

2. Loose or broken spark plug. (Hissing noise

will occur when trying to start.)

3. Loose cylinder head or damaged

head gasket. (Hissing noise will

occur when trying to start.)

4. Engine valves or tappets

mis-adjusted or stuck.

COMPRESSION RELATED:

1. Pour tablespoon of oil into spark

plug hole. Crank engine a few

times and try to start again.

2. Tighten spark plug. If that does not work,

replace spark plug. If problem persists,

may have head gasket problem, see #3.

3. Tighten head. If that does not remedy

problem, replace head gasket.

4. Have qualied technician diagnose/

repair ignition system.

Engine stops when

under heavy load

1. Dirty air lter.

2. Engine running cold.

1. Clean or replace element.

2. Allow engine to warm up prior

to operating equipment.

K&77&)%,77%#,2*$H%/(*4,'$"&8#%).*8*M*(%9",38&#"83%&(%#*(M"4"83%$.*%*S'"/5*8$%&(%*83"8*1

Page 20 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

Y(&+7*5 Y&##"+7*%<,'#*# Y(&+,+7*%F&7'$"&8#

Engine misres 1. Spark plug cap loose.

2. Incorrect spark plug gap or

damaged spark plug.

3. Defective spark plug cap.

4. Old or low quality gasoline.

5. Incorrect compression.

1. Check wire connections.

2. Re-gap or replace spark plug.

3. Replace spark plug cap.

4. Use only fresh 87+ octane stabilizer treated

unleaded gasoline.%

L&%8&$%'#*%3,#&7"8*%)"$.%5&(*%$.,8%

Qel%*$.,8&7%\6QVJ%6deJ%6UVJ%*$41]1

5. Diagnose and repair compression.

(Use 683"8*%)"77%8&$%#$,($-%

<CDYI6FF@C>%I6A=E6L section.)

Engine stops

suddenly

1. Low oil shutdown.

2. Fuel tank empty or full of impure or low

quality gasoline.

3. Defective fuel tank cap creating

vacuum, preventing proper fuel ow.

4. Faulty magneto.

5. Disconnected or improperly

connected spark plug cap.

1. Fill engine oil to proper level. Check

engine oil before EVERY use.

2. Fill fuel tank with fresh 87+ octane stabilizer

treated unleaded gasoline.%

L&%8&$%'#*%3,#&7"8*%)"$.%5&(*%$.,8%

Qel%*$.,8&7%\6QVJ%6deJ%6UVJ%*$41]1

3. Test/replace fuel tank cap.

4. Have qualied technician service magneto.

5. Secure spark plug cap.

Engine knocks 1. Old or low quality gasoline.

2. Engine overloaded.

3. Incorrect spark timing, deposit buildup,

worn engine, or other mechanical problems.

1. Fill fuel tank with fresh 87+ octane stabilizer

treated unleaded gasoline. %%

L&%8&$%'#*%3,#&7"8*%)"$.%5&(*%$.,8%

Qel%*$.,8&7%\6QVJ%6deJ%6UVJ%*$41]1

2. Do not exceed equipment’s load rating.

3. Have qualied technician diagnose

and service engine.

Engine backres 1. Impure or low quality gasoline.

2. Engine too cold.

3. Intake valve stuck or overheated engine.

4. Incorrect timing.

1. Fill fuel tank with fresh 87+ octane stabilizer

treated unleaded gasoline. %%

L&%8&$%'#*%3,#&7"8*%)"$.%5&(*%$.,8%

Qel%*$.,8&7%\6QVJ%6deJ%6UVJ%*$41]1

2. Use cold weather fuel and oil

additives to prevent backring.

3. Have qualied technician diagnose

and service engine.

4. Check engine timing.

Product doesn’t

have power.

1. Product not plugged in properly.

2. Circuit Breaker tripped.

3. GFCI activated.

4. Product needs service.

1. Turn off and unplug the product, then

plug it back in again and turn on.

2. Turn off and unplug product. Reset Circuit

Breaker. Plug in product and turn on.

3. Turn off and unplug product. Test GFCI

receptacle. If functioning properly reset

GFCI, plug in product and turn on.

4. Have product repaired.

Product begins to

operate abnormally.

1. Problem with appliance.

2. Rated load capacity exceeded.

1. Immediately unplug appliance. Have

appliance repaired by a qualied

technician, or replace appliance.

2. Lower the number of items plugged into

the Generator to stay within the rated

capacity, or use a more powerful generator.

K&77&)%,77%#,2*$H%/(*4,'$"&8#%).*8*M*(%9",38&#"83%&(%#*(M"4"83%$.*%*S'"/5*8$%&(%*83"8*1

E(&'+7*#.&&$"83%\4&8$"8'*9]

Page 21K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

I*4&(9%Y(&9'4$o#%F*(",7%>'5+*(%P*(*-%

>&$*- If product has no serial number, record month and year of purchase instead.

>&$*- Some parts are listed and shown for illustration purposes only,

and are not available individually as replacement parts.

YA6=F6%I6=L%EP6%KCAACZ@>N%<=I6K;AAB

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Page 22 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

Y,($ L*#4("/$"&8 j$H

1 Gasket, Cylinder Head 1

2 Cylinder Head Cover 1

3 Gasket, Cylinder Head Cover 1

4 Tube, Breather 1

5 Bolt Sub, Cylinder Head Cover 1

6 Stud 2

7 Stud 2

8 Pin 2

9 Plug, Spark 1

10 Head Sub, Cylinder 1

11 Crankcase Sub. 1

12 Seal, Oil 1

13 Sensor, Engine Oil 1

14 Bearing 1

15 Plug, Rubber 1

16 Protector, Oil 1

17 Bolt 1

18 Flat Washer 2

19 Bolt, Drain Plug 2

20 Clip 1

21 Arm, Governor 1

22 Seal, Oil 1

23 Pin 1

24 Flat Washer 1

25 Bolt 2

26 Cover, Crankcase 1

27 Gasket, Crankcase 1

28 Bearing 1

29 Dipstick Sub, Oil 1

30 Pin 2

31 Bolt 7

32 Bearing 1

33 Gear Assembly, Governor 1

34 Seal, Oil 1

35 Crankshaft Assembly 1

36 Shaft Assembly, Balancing 1

37 Ring Set, Oil 1

38 Clip, Piston Pin 2

39 Piston 1

40 Pin, Piston 1

41 Rod, Connecting 1

42 Primary Ring 1

43 Secondary Ring 1

44 Camshaft Assembly 1

45 Valve, Exhaust 1

46 Valve, Intake 1

47 Seat, Valve Spring 1

48 Exhaust Valve Retainer 1

49 Rotator, Valve 1

50 Guide, Seal 1

51 Tappet, Valve 2

52 Lifter Sub, Valve 2

53 Plate Sub, Lifter Stopper 1

54 Bolt, Valve Adjusting 2

55 Rocker, Valve 2

56 Valve Adjusting Nut 2

57 Nut, Valve Lock 2

58 Spring, Valve 2

Y,($ L*#4("/$"&8 j$H

59 Retainer, Valve Spring 1

60 Starter Assembly, Recoil 1

61 Bolt 3

62 Shroud 1

63 Shroud, Cylinder Body 1

64 Bolt 1

65 Bolt 5

66 Carburetor Assembly 1

67 Gasket, Air Cleaner 2

68 Gasket, Carburetor 1

69 Plate, Carburetor Insulator 1

70 Gasket, Inlet 1

71 Clip 2

72 Sleeve, Breather Tube Fixing 1

73 Control Assembly, Choke 1

74 Valve, One Way 1

75 Cleaner, Air 1

76 Nut 2

77 Nut, Flywheel 1

78 Starter Pulley 1

79 Impeller 1

80 Flywheel Sub. 1

81 Bolt 2

82 Coil, Ignition 1

83 Bolt 1

84 Clamp, Charge Coil 1

85 Bolt 2

86 Coil Sub, Charge 1

87 Bolt 2

88 Control Assembly, Throttle 1

89 Spring, Throttle Valve Returning 1

90 Rod, Governor 1

91 Spring, Governor 1

92 Support Sub, Governor 1

93 Nut 1

94 Bolt, Governor Support 1

95 Collar 1

96 Motor, Starting 1

97 Bolt 2

98 Relay, Starting 1

99 Bolt 2

100 Mufer Assembly 1

101 Cover, Mufer Inner 1

102

Cushion, Mufer Insulator Rubber

103 Bracket,Mufer 1

104 Bolt 4

105 Cover, Mufer Side 1

106 Bolt 7

107 Cover, Mufer Outer 1

108 Gasket, Exhaust Outlet 2

109 Nut 2

110 Pipe, Exhaust 1

111 Bolt 2

112 Tank, Fuel 1

113 Sleeve, Fuel Tank Rubber 4

114 Bush 4

115 Washer 4

116 Bolt 4

Y,($ L*#4("/$"&8 j$H

117 Cover, Fuel Tank 1

118 Fuel Strainer 1

119 Screw 2

120 Leveler Assembly, Oil 1

121 Cock Assembly, Fuel 1

122 Collar 2

123 Tube, Fuel 1

124 Frame Assembly, Engine 1

125 Nut 4

126 Cushion, Engine Frame 2

127 Cushion, Engine Frame Rear 2

128 Nut 4

129 Brace 1

130 Bolt 2

131 Socket Sub, Power Supply 1

132 Socket Sub, Power Supply 2

133 Protector, Overcurrent 2

134 Terminal Sub, Grounding 1

135 Socket Sub. DC 1

136 Switch Sub. 1

137 Socket Sub, Power Supply 1

138 Protector, Overcurrent 1

139 Protector, Overcurrent 1

140 Case, Panel Rear 1

141 Panel Sub, Control 1

142 Motor Assembly 1

143 Bracket, Motor 1

144 Stator Bolt 4

145 Washer 1

146 Rotor Bolt 1

147 Regulator, Voltage 1

148 Bolt 2

149 Brush Sub, Carbon 1

150 Bolt 1

151 Cover, Motor Rear 1

152 Bolt 2

153 Block, Terminal 1

154 Bolt 2

155 Band 2

156 Bolt 2

157 Stator Bolt 2

158 Washer 2

159 Stator Nut 2

160 Bolt 1

161 Stopper, Motor Right Cover 1

162 Shroud, Motor 1

163 Bolt 1

164 Bolt, Cylinder Head 4

165 Valve, One Way 1

166 Clamp 1

167 Hose, Fuel Steam Rubber 1

168 Clamp 1

169 Bolt 2

170 Collector, Fuel Steam 1

171 Clamp 1

172 Hose, Air Cleaner Rubber 1

173 Clamp 1

Y,($#%A"#$%,89%L",3(,5

Y,($#%A"#$

Page 23K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

=##*5+7H%L",3(,5

164

37 39 40

116

31 33

101

102

103 104

105

106

107

108

111

106

110

100

104

106

111

143

144

145

146

147

148

149

152

151

152

153

154

156155

155

156

157

158

159

158

159

150

142

154

65 65

160

161

162

163

11 12

97 9999

136 135

134

133

132

131

141137

138

133

139

140

129

130

124

521521

126

125

126

128 128

128 127

125

127

128

122

123

112

113

114

115

116

113

114

115

116

118

117

113

114

115

116

119

120

116

115

113

114

165

166

170

167

169

171

172

173

121

168

122

109

108

76 76

Page 24 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

Z,((,8$"*#

A"5"$*9%Xe%L,H%Z,((,8$H%\I*$,"7]

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so

the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY

AND FITNESS, EXCEPT FOR THE EMISSIONS CONTROL SYSTEM WARRANTY BELOW.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid.

Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our

inspection verifies the defect, we will either repair or replace the product at our election or we may elect to

refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return

repaired products at our expense, but if we determine there is no defect, or that the defect resulted from

causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Page 25K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

65"##"&8#%<&8$(&7%FH#$*5%Z,((,8$H

The California Air Resources Board and Harbor Freight Tools (HFT) are pleased to explain the emissions control

system warranty on your 2017 Small Off-Road Engine, in addition to the Retail Warranty above. In California, new

equipment that uses small off-road engines must be designed, built, and equipped to meet the State’s stringent

anti-smog standards. HFT warrants that the emissions control system on your engine will be free from defects in

material and workmanship for two (2) years, provided there has been no abuse, neglect, or improper maintenance of

your engine. HFT also warrants that the emissions control system on your engine is designed, built, and equipped

so that it conforms to the United States Environmental Protections Agency’s (EPA) emissions requirements in effect

at the time of manufacture.

Your emissions control system may include parts such as the carburetor or fuel-injection system, the ignition

system, catalytic converter, fuel tanks, fuel lines, fuel caps, valves, canisters, vapor hoses, clamps, connectors, and

other emissions-related assemblies.

Where a warrantable condition exists, HFT will repair or replace, at our option, your engine if at no cost to you,

including diagnosis, parts and labor.

D=>;K=<E;I6IkF%Z=II=>EB%<C!6I=N6

This emissions control system is warranted for two years. If any emission-related part on your engine is

defective, the part will be repaired or replaced by HFT.

CZ>6IkF%Z=II=>EB%I6FYC>F@[@A@E@6F

As the engine owner, you are responsible for the performance of the required maintenance listed in your

Owner’s Manual.

As the engine owner, you should however be aware that HFT may deny you warranty coverage if your engine or

a part has failed due to abuse (including failure to follow the fuel use instructions contained in this manual), neglect,

improper maintenance, or unapproved modifications.

You are responsible for contacting HFT as soon as the problem exists in order to obtain warranty repair

or replacement, by doing either of the following: (a) contact HFT product support at 1-888-866-5797 or

productsupport@harborfreight.com; or (b) bring the to your nearest Harbor Freight Tools retail store. The nearest

Harbor Freight Tools retail store can be found on the internet at http://www.harborfreight.com. The warranty

repairs or replacement should be completed in a reasonable amount of time, not to exceed 30 days. If you have

a question regarding your warranty coverage, you should contact HFT product support at 1-888-866-5797 or

productsupport@harborfreight.com.

Page 26 K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1 ITEM 63087

F=K6EB F6E;Y CY6I=E@C> D=@>E6>=><6

N6>6I=A%6D@FF@C>F%Z=II=>EB%<C!6I=N6

a) The warranty period begins on the date the engine or equipment is delivered to an ultimate purchaser.

The warranty period is two years.

b) HFT warrants to the initial owner and each subsequent owner that the engine is:

1. Designed, built, and equipped so as to conform with all applicable

regulations adopted by the Air Resources Board; and

2. Free from defects in materials and workmanship that causes the

failure of a warranted part for a period of two years.

c) The warranty on emissions-related parts is as follows:

1. Any warranted part that is not scheduled for replacement as required maintenance in the written

instructions provided, is warranted for the warranty period stated above. If any such part fails

during the period of warranty coverage, it will be repaired or replaced HFT. Any such part

repaired or replaced under the warranty will be warranted for the remaining warranty period.

2. Any warranted part that is scheduled only for regular inspection in the written instructions

is warranted for the warranty period stated above. Any such part repaired or replaced

under warranty will be warranted for the remaining warranty period.

3. Any warranted part that is scheduled for replacement as required maintenance in the written

instructions will be warranted for the period of time prior to the first scheduled replacement point

for that part. If the part fails prior to the first scheduled replacement, the part will be repaired

or replaced by HFT. Any such part repaired or replaced under warranty will be warranted for

the remainder of the period prior to the first scheduled replacement point for the part.

4. Repair or replacement of any warranted part under the warranty will be performed at no

charge to the owner at a retail store or by HFT paying for shipping the product for repair.

5. Notwithstanding the provisions herein, warranty services or repairs will be

provided at all retail stores or by contacting HFT product support.

6. The owner will not be charged for diagnostic labor that leads to the determination that a warranted

part is in fact defective, provided that such diagnostic work is performed at a retail store.

7. HFT is liable for damages to other engine components proximately

caused by a failure under warranty of any warranted part.

8. Throughout the emissions warranty period stated above, HFT will maintain a supply

of warranted parts sufficient to meet the expected demand for such parts.

9. Any replacement part may be used in the performance of any warranty maintenance or repairs and will

be provided without charge to the owner. Such use will not reduce the warranty obligations of HFT.

10. Add-on or modified parts that are not approved by HFT may not be used. The use of any non-exempted

add-on or modified parts will be grounds for disallowing a warranty claim. HFT is not liable to warrant

failures of warranted parts caused by the use of a non-exempted add-on or modified part.

d) Emission Warranty Parts List.

1. Fuel Metering System

a. Carburetor and its internal parts (and/or

pressure regulator or fuel injection system).

b. Fuel tank.

c. Cold start enrichment system.

d. Air/fuel ratio feedback and control system.

2. Air Induction System

a. Controlled hot air intake system.

b. Intake manifold.

c. Air filter.

3. Ignition System

a. Spark plugs.

b. Magneto ignition system.

c. Spark advance/retard system.

4. Catalyst System (if so equipped)

a. Exhaust pipe stud/exhaust manifold.

b. Thermal reactor.

c. Catalytic converter (if so equipped).

5. Particulate Controls

a. Traps, filters, precipitators, and any other

device used to capture particulate emissions.

6. Miscellaneous Items Used in Above Systems

a. Vacuum, temperature and time sensitive

valves and switches.

b. Hoses, belts, connectors, and assemblies.

7. Evaporative Emission Control System

a. Fuel tank.

b. Fuel caps, valves, canisters, filters, vapor hoses,

clamps, connectors, belts, and assemblies.

HFT provides with each product written instructions for the maintenance and use of the product by the owner.

Page 27K&(%$*4.8"4,7%S'*#$"&8#J%/7*,#*%4,77%QTUUUTURRTVWXW1ITEM 63087

F=K6EBF6E;YCY6I=E@C>D=@>E6>=><6

cgXQ%D"##"&8%C,`#%[7M91%%p%%YC%[&G%ReeX%%p%%<,5,("77&J%<=%XceQQ%%p%%QTUUUTURRTVWXW

Manual For The 63087 8750 Max Starting/7000 Running Watts, 13 HP (420cc) Generator CARB With GFCI Outlet Protection

Navigation menu

Versions of this User Manual:

Views

Navigation