Manual For The 63582 Flux 125 Welder

User Manual: Manual for the 63582 Flux 125 Welder Flux 125 Welder

Open the PDF directly: View PDF PDF.
Page Count: 28

Scroll down to view the document on your mobile browser.
Visit our website at: http://www.harborfreight.comEmail our technical support at: productsupport@harborfreight.comOwner’s Manual & Safety InstructionsSave This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 17kWhen unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.Copyright© 2017 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly an d se rv ic e may n ot b e in cl uded.Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 63582 Table of ContentsSafety ......................................................... 2Specifications ............................................. 6Setup .......................................................... 7Basic Welding ............................................ 12Welding Tips .............................................. 18Maintenance .............................................. 22Parts List and Diagrams ............................ 25Warranty .................................................... 28WARNING SYMBOLS AND DEFINITIONSThis is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.Indicates a hazardous situation which, if not avoided, will result in death or serious injury.Indicates a hazardous situation which, if not avoided, could result in death or serious injury.Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.Addresses practices not related to personal injury.IMPORTANT SAFETY INFORMATIONRead all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.General Safety InformationPROTECT yourself and others. Read and understand this information.1. Before use, read and understand manufacturer′s instructions, Material Safety Data Sheets (MSDS), employer′s safety practices, and ANSI Z49.1.2. Keep out of reach of children. Keep children and bystanders away while operating.3. Place the Welder on a stable location before use. If it falls while plugged in, severe injury, electric shock, or fire may result.4. Stay alert, watch what you are doing and use common sense when operating a welder. Do not use a welder while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating welders may result in serious personal injury.5. Do not overreach. Keep proper footing and balance at all times.6. Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Welder.7. Never leave the Welder unattended while energized. Turn power off if you have to leave.8. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.SAFETY MAINTENANCEBASIC WELDING WELDING TIPSSETUP

Navigation menu