Manual For The 64012 46 In. Mobile Workbench With Solid Wood Top
User Manual: Manual for the 64012 46 in. Mobile Workbench with Solid Wood Top 46 in. Mobile Storage Cabinet with Wood Top
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 17h Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2017 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Specifications Total Combined Weight Capacity (Evenly distributed from bottom up.) Page 2 1200 lb For technical questions, please call 1-888-866-5797. Item 64012 IMPORTANT SAFETY INFORMATION Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 5. Do not assemble when tired or when under the influence of alcohol, drugs or medication. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 6. Weight capacity and other product capabilities apply to properly and completely assembled product only. 3. Keep assembly area clean and well lit. 7. Assemble on a flat, level, hard and smooth surface capable of safely supporting loaded Workbench. 4. Keep bystanders out of the area during assembly. Use Precautions TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING: 1. LOAD FROM BOTTOM UP ONLY. 2. DO NOT SIT, STAND OR CLIMB ON THIS ITEM. 3. This product is not a toy nor a toy chest. Do not allow children to play with or near this item. 4. Do not use for food preparation. 5. Do not exceed 1200 lb weight capacity, evenly distributed from bottom up. Uneven loading causes tipping. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. 6. Empty, close, and lock Drawer before moving. 8. Do not lift using handle(s). Do not move or lift while loaded. 9. Lock Swivel Casters after moving. 10. Do not mount on truck bed or any other moving object. 11. Use as intended only. 12. Inspect before every use; do not use if parts are loose or damaged. 13. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 7. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Workbench. Do not roll Workbench over concrete seams or other rough/uneven surfaces. Item 64012 For technical questions, please call 1-888-866-5797. Page 3 Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Workbench. 4. Attach two Fixed Casters (5) to the opposite end from Handle using eight Caster Bolts (10) from the inside of the cabinet down, secured with eight Flat Washers (8), eight Spring Washers (9), and eight Caster Nuts (7). 2. Attach Handle (3) to either side of Workbench using four Handle Bolts (4). 5. Lock the Swivel Casters by depressing the brake levers. 6. Install the four tabs on each Left Shelf (12) into the racks on the left side and center of the Cabinet to install them at the desired heights. Handle Bolt (4) tab Handle (3) rack 3. Attach two Swivel Casters (6) to the same end as Handle using eight Caster Bolts (10) from the inside of the cabinet down, secured with eight Flat Washers (8), eight Spring Washers (9), and eight Caster Nuts (7). 7. Install the four tabs on each Right Shelf (13) into the racks on the right side and center of the Cabinet to install them at the desired heights. Caster Bolt (10) 8. Use the two hooks on the back of each Bin (14/15) to install it in the holes on the inside of one of the doors. Swivel Caster (6) Bin (14/15) brake lever Page 4 hook Flat Washer (8) Spring Washer (9) Caster Nut (7) For technical questions, please call 1-888-866-5797. Item 64012 Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Empty Drawer. 4. Roll Workbench to a flat, level, hard and smooth surface capable of safely supporting a fully loaded Workbench. Do not roll Workbench over concrete seams or other rough/uneven surfaces. 2. Close Drawer and lock it. 3. Unlock Swivel Casters. 5. Lock Swivel Casters. 6. Unlock Drawer and fill Workbench evenly, from bottom to top. Do not exceed weight capacities. Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use. 1. PERIODICALLY, inspect the general condition of the Workbench. Check for: • loose hardware, 2. Wipe external surfaces of the Workbench with clean cloth. 3. Lubricate Drawer Slides as needed. • misalignment or binding of moving parts, • brake operation, • caster swivel function and movement, • cracked or broken parts, • any other condition that may affect its safe operation. Item 64012 For technical questions, please call 1-888-866-5797. Page 5 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Parts List and Diagram Parts List Part 1 2 3 4 5 6 7 8 Description Wood Top Cabinet Handle Handle Bolt Fixed Caster Swivel Caster Caster Nut Flat Washer Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Page 6 Qty Part 1 1 1 4 2 2 16 16 9 10 11 12 13 14 15 Description Qty Spring Washer Caster Bolt Drawer Left Shelf Right Shelf Quadruple Bin Double Bin 16 16 1 2 2 2 2 Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-888-866-5797. Item 64012 Assembly Diagram 11 1 12 2 14 15 3 4 10 13 5 8 9 6 7 Item 64012 For technical questions, please call 1-888-866-5797. Page 7 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 8 Producer : Mac OS X 10.11.6 Quartz PDFContext Create Date : 2017:08:08 17:45:11Z Modify Date : 2017:08:08 17:45:11ZEXIF Metadata provided by EXIF.tools