Manual For The 67831 26 In., 16 Drawer Glossy Red Roller Cabinet Combo
User Manual: Manual for the 67831 26 in., 16 Drawer Glossy Red Roller Cabinet Combo 8 Drawer Rolling Tool Cabinet w/ 8 Drawer Top Chest
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
Specifications Component Size Weight Capacity Top Shelf 26-1/2″ W x 18″ L 305 lb Drawer A (x3) 22-1/2″ W x 16″ L x 2″ D 75 lb each Drawer B (x2) 22-1/2″ W x 16″ L x 3-1/8″ D 90 lb each Drawer C 22-1/2″ W x 16″ L x 3-7/8″ D 110 lb Drawer D (x2) 22-1/2″ W x 16″ L x 6″ D 120 lb each Total Combined Weight Capacity (Evenly distributed from bottom up.) Page 2 For technical questions, please call 1-888-866-5797. 1060 lb Part of Item 67831 IMPORTANT SAFETY INFORMATION Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 5. Do not assemble when tired or when under the influence of alcohol, drugs or medication. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 6. Weight capacity and other product capabilities apply to properly and completely assembled product only. 3. Keep assembly area clean and well lit. 7. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet. 4. Keep bystanders out of the area during assembly. Use Precautions TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING: 1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM. 2. This product is not a toy nor a toy chest. Do not allow children to play with or near this item. 3. Do not exceed weight capacities, evenly distributed from bottom up. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. 7. Do not lift using handle(s). Do not move or lift while loaded. 8. To prevent tipping, move using supplied handle on Bottom Cabinet only. 9. Lock Swivel Casters after moving. 10. Do not mount on truck bed or any other moving object. 4. Do not open more than one Drawer at once. 11. Use as intended only. 5. Empty, close, and lock Drawers before moving. 12. Inspect before every use; do not use if parts are loose or damaged. 6. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet. Do not roll Cabinet over concrete seams or other rough/uneven surfaces. Part of Item 67831 13. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. For technical questions, please call 1-888-866-5797. Page 3 Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet. 4. Attach two Locking Swivel Casters (7) to the same side as Handle using eight Caster Screw Sets (8). 2. Locate the Keys, label them, then put them in a safe place. Note: The Bottom Cabinet and Top Chest have different sets of keys. Locking Swivel Caster 3. Attach Side Handle (1) to either side of Cabinet using four Handle Screws (2). Brake Lever Spring Washer Side Handle Washer Screw Figure B Handle Screw 5. Attach two Fixed Casters (6) to the other side using eight Caster Screw Sets (8). Fixed Caster Figure A Spring Washer Washer Screw Figure C 6. Lock the Casters by depressing the brake levers. 7. Assemble Top Chest according to its Owner’s Manual. Final Assembly 1. Using an assistant, place EMPTY Top Chest on top of Bottom Cabinet. Top Chest 2. WARNING! Make sure the Top Chest is seated inside the Bottom Cabinet’s edges. Edge Edge Bottom Cabinet Figure D Page 4 For technical questions, please call 1-888-866-5797. Part of Item 67831 Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Empty all Drawers. 2. Close all Drawers and lock them. 3. Unlock Swivel Casters. 4. To prevent tipping, move using supplied handle on Bottom Cabinet only. Roll Cabinet to a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet. Do not roll Cabinet over concrete seams or other rough/uneven surfaces. 5. Lock Swivel Casters. 6. Unlock Drawers and fill Cabinet evenly, from bottom to top. Do not exceed weight capacities. Maintenance and Servicing Procedures not specifically explained in this document must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use. 1. PERIODICALLY, inspect the general condition of the Cabinet. Check for: • loose hardware, • misalignment or binding of moving parts, 2. Wipe external surfaces of the Cabinet with clean cloth. 3. Lubricate Drawer Slides as needed. • brake operation, • caster swivel function and movement, • cracked or broken parts, • any other condition that may affect its safe operation. Part of Item 67831 For technical questions, please call 1-888-866-5797. Page 5 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Parts List and Diagram Parts List Part 1 2 3 4 5 6 7 Description Side Handle Handle Screw (M8x25) Lock Key Drawer Slide Fixed Caster Locking Swivel Caster Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Page 6 Qty 1 4 1 3 16 2 2 Part 8 9 A B C D Description Caster Screw Set: Screw (M8x20), Spring Washer (Ø8), Washer (Ø8) Drawer Liner Drawer 22-1/2″ W x 16″ L x 2″ D Drawer 22-1/2″ W x 16″ L x 3-1/8″ D Drawer 22-1/2″ W x 16″ L x 3-7/8″ D Drawer 22-1/4″ W x 16-1/4″ L x 6″ D Qty 16 8 3 2 1 2 Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-888-866-5797. Part of Item 67831 Assembly Diagram 2 1 2 3 4 9 A B C D 5 D 7 7 8 6 8 6 8 8 Part of Item 67831 For technical questions, please call 1-888-866-5797. Page 7 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2014:01:22 15:28:03-08:00 Creator : Adobe InDesign CC (Macintosh) Modify Date : 2014:05:21 15:38:06-07:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Instance ID : uuid:ba7322c5-dbb0-4747-9e8a-551a0a58b0f4 Original Document ID : adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Document ID : xmp.id:7167c5da-bd94-4b74-bf9f-d1a973134030 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:c9c7b990-9a8a-4201-b341-c51de15eb451 Derived From Document ID : xmp.did:32b02379-2a1e-4812-9df8-6b70b080887e Derived From Original Document ID: adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC (Macintosh) History Changed : / History When : 2014:01:22 15:28:03-08:00 Metadata Date : 2014:05:21 15:38:06-07:00 Creator Tool : Adobe InDesign CC (Macintosh) Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 16EXIF Metadata provided by EXIF.tools