7.1.3.4 Packet Tracer Propagating A Route In EIGRP For IPv4 And IPv6 Instructions

7.1.3.4%20Packet%20Tracer%20-%20Propagating%20a%20Default%20Route%20in%20EIGRP%20for%20IPv4%20and%20IPv6%20Instructions

7.1.3.4%20Packet%20Tracer%20-%20Propagating%20a%20Default%20Route%20in%20EIGRP%20for%20IPv4%20and%20IPv6%20Instructions

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 2

Download7.1.3.4 Packet Tracer - Propagating A Route In EIGRP For IPv4 And IPv6 Instructions
Open PDF In BrowserView PDF
Packet Tracer – Propagating a Default Route in EIGRP for IPv4
and IPv6
Topology

Addressing Table
IPv4 Address
Device

Subnet Mask

Interface
IPv6 Address/Prefix

IPv4-Edge

S0/0/0

172.31.6.1

255.255.255.0

S0/0/1

172.31.7.1

255.255.255.0

S0/1/0

209.165.200.226

255.255.255.224

G0/0

172.31.8.1

255.255.255.0

S0/0/0

172.31.6.2

255.255.255.0

G0/0

172.31.9.1

255.255.255.0

S0/0/1

172.31.7.2

255.255.255.0

S0/0/0

2001:DB8:ACAD:7::1/64

S0/0/1

2001:DB8:ACAD:6::1/64

S0/1/0

2001:DB8:CAFE:ABCD::2/164

G0/0

2001:DB8:ACAD:8::1/64

S0/0/0

2001:DB8:ACAD:7::2/64

G0/0

2001:DB8:ACAD:9::1/64

S0/0/1

2001:DB8:ACAD:6:::2/64

Branch-1

Branch-2

IPv6-Edge

Branch-3

Branch-4

Objectives
Part 1: Propagate an IPv4 Default Route

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 1 of 2

Packet Tracer – Propagating a Default Route in EIGRP for IPv4 and IPv6
Part 2: Propagate an IPv6 Default Route
Part 3: Verify Connectivity to Outside Hosts

Scenario
In this activity, you will configure and propagate a default route in EIGRP for IPv4 and IPv6 networks. EIGRP
is already configured. However, you are required to configure an IPv4 and an IPv6 default route. Then, you
will configure the EIGRP routing process to propagate the default route to downstream EIGRP neighbors.
Finally, you will verify the default routes by pinging hosts outside the EIGRP routing domain.

Part 1: Propagate a Default Route in EIGRP for IPv4
Step 1: Verify EIGRP configuration on each IPv4 enabled router.
Display the routing table of each IPv4 enabled router and verify that all IPv4 routes are visible.

Step 2: Configure an IPv4 default route.
Configure a directly connected IPv4 default route on IPv4-Edge.

Step 3: Propagate the default route in EIGRP.
Configure the EIGRP routing process to propagate the default route.

Step 4: Verify IPv4 default route is propagating.
Display the routing tables for Branch-1 and Branch-2 to verify the default route is now installed.

Part 2: Propagate a Default Route in EIGRP for IPv6
Step 1: Verify EIGRP configuration on each IPv6 enabled router.
Display the routing table of each IPv6 enabled router and verify that all IPv6 routes are visible.

Step 2: Configure an IPv6 default route.
Configure a directly connected IPv6 default route on IPv6-Edge.

Step 3: Propagate the default route in EIGRP.
Configure the EIGRP routing process to propagate the default route.

Step 4: Verify IPv6 default route is propagating.
Display the routing tables for Branch-3 and Branch-4 to verify the default route is now installed.

Part 3: Verify Connectivity to Outside Hosts


PC1 and PC2 should now be able to ping IPv4 Outside Host.



PC3 and PC4 should now be able to ping IPv6 Outside Host.

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 2 of 2
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Betty Staerk
Creator                         : Microsoft® Word 2010
Create Date                     : 2014:08:08 15:26:31-07:00
Modify Date                     : 2014:08:08 15:26:31-07:00
Producer                        : Microsoft® Word 2010
EXIF Metadata provided by EXIF.tools

Navigation menu