7.3.1.2 Packet Tracer Skills Integration Challenge Instructions
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Packet Tracer - Skills Integration Challenge Topology © 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 3 Packet Tracer - Skills Integration Challenge Addressing Table IPv4 Address Device Subnet Mask Interface IPv6 Address/Prefix S0/0/0 172.31.6.1 255.255.255.252 S0/0/1 10.10.8.1 255.255.255.252 S0/1/0 209.165.200.226 255.255.255.224 S0/0/0 172.31.6.2 255.255.255.252 Lo8 172.31.0.1 255.255.255.128 Lo9 172.31.0.129 255.255.255.128 Lo10 172.31.1.1 255.255.255.128 Lo11 172.31.1.129 255.255.255.128 S0/0/1 10.10.8.2 255.255.255.252 Lo1 10.10.0.1 255.255.255.0 Lo2 10.10.1.1 255.255.255.0 Lo3 10.10.2.1 255.255.254.0 Lo4 10.10.4.1 255.255.252.0 S0/0/0 2001:DB8:A001:6::1/64 S0/0/1 2001:DB8:A001:7::1/64 S0/1/0 2001:DB8:CAFE:1::2/64 R3 S0/0/0 2001:DB8:A001:7::2/64 R4 S0/0/1 2001:DB8:A001:6::2/64 IPv4-Edge R1 R2 IPv6-Edge Scenario In this activity, you must implement EIGRP for IPv4 and IPv6 on two separate networks. Your task includes enabling EIGRP, assigning router IDs, changing the hello timers, and limiting EIGRP advertisements. Requirements EIGRP for IPv4 • Implement EIGRP on IPv4-enabled routers using Autonomous System 1. o Use a single classful network address to advertise the loopback interfaces. o Use the wildcard mask to advertise the /30 networks between R1, R2 and IPv4-Edge. o Use the default passive interface method and only allow EIGRP updates out the active EIGRP serial interfaces. • Configure a directly attached default route on IPv4-Edge and propagate it in EIGRP updates. • Configure the serial interfaces between R1, R2 and IPv4-Edge to send hellos every 10 seconds. © 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 3 Packet Tracer - Skills Integration Challenge • R1 and R2 should have a default route in the routing table (D*EX). • Verify R1 and R2 can ping the IPv4 Server. IPv4 Server should also be able to ping every loopback address on R1 and R2. EIGRP for IPv6 • Implement EIGRP for IPv6 on the IPv6-enabled routers using Autonomous System 1. o Assign IPv6-Edge with the router ID of 1.1.1.1 o Assign R3 with the router ID of 3.3.3.3 o Assign R4 with the router ID of 4.4.4.4 • Configure a directly attached default route on IPv6-Edge and propagate it in EIGRP updates. • R3 and R4 should show a default external route in the routing table. • Verify R3 and R4 can ping the IPv6 Server. IPv6 Server should also be able to ping every loopback address on R3 and R4. Suggested Scoring Rubric Note: Packet Tracer does not currently grade EIGRP for IPv6 summary routes. Therefore, part of your grade depends on routing table verification by your instructor. Scored Work Possible Points IPv6-Edge Routing Table 10 Packet Tracer Score 90 Total Score 100 © 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Earned Points Page 3 of 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Betty Staerk Company : Microsoft Create Date : 2017:08:11 09:55:01-07:00 Modify Date : 2017:08:11 09:55:01-07:00 Source Modified : D:20170811165254 Language : EN-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Metadata Date : 2017:08:11 09:55:01-07:00 Creator Tool : Acrobat PDFMaker 11 for Word Document ID : uuid:ee56369e-e339-45d3-a11f-010bff5169e2 Instance ID : uuid:28f09a49-dd09-45db-b864-15f41d0b8bc2 Subject : 6 Format : application/pdf Creator : Betty Staerk Producer : Adobe PDF Library 11.0 Page Layout : OneColumn Page Count : 3EXIF Metadata provided by EXIF.tools