9.2.2.6 Packet Tracer Configuring Multiarea OSPFv2 Instructions
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Packet Tracer – Configuring Multiarea OSPFv2 Topology Addressing Table Device R1 R2 R3 Interface IP Address Subnet Mask OSPFv2 Area G0/0 10.1.1.1 255.255.255.0 1 G0/1 10.1.2.1 255.255.255.0 1 S0/0/0 192.168.10.2 255.255.255.252 0 G0/0 10.2.1.1 255.255.255.0 0 S0/0/0 192.168.10.1 255.255.255.252 0 S0/0/1 192.168.10.5 255.255.255.252 0 G0/0 192.168.2.1 255.255.255.0 2 G0/1 192.168.1.1 255.255.255.0 2 S0/0/1 192.168.10.6 255.255.255.252 0 Objectives Part 1: Configure Multiarea OSPFv2 Part 2: Verify and Examine Multiarea OSPFv2 © 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 3 Packet Tracer – Configuring Multiarea OSPFv2 Background In this activity, you will configure multiarea OSPFv2. The network is already connected and interfaces are configured with IPv4 addressing. Your job is to enable multiarea OSPFv2, verify connectivity, and examine the operation of multiarea OSPFv2. Part 1: Configure OSPFv2 Step 1: Configure OSPFv2 on R1. Configure OSPFv2 on R1 with a process ID of 1 and a router ID of 1.1.1.1. Step 2: Advertise each directly connected network in OSPFv2 on R1. Configure each network in OSPFv2 assigning areas according to the Addressing Table. R1(config-router)# network 10.1.1.0 0.0.0.255 area 1 R1(config-router)# network 10.1.2.0 0.0.0.255 area 1 R1(config-router)# network 192.168.10.0 0.0.0.3 area 0 Step 3: Configure OSPFv2 on R2 and R3. Repeat the steps above for R2 and R3 using a router ID of 2.2.2.2 and 3.3.3.3, respectively. Part 2: Verify and Examine Multiarea OSPFv2 Step 1: Verify connectivity to each of the OSPFv2 areas. From R1, ping each of the following remote devices in area 0 and area 2: 192.168.1.2, 192.168.2.2, and 10.2.1.2. Step 2: Use show commands to examine the current OSPFv2 operations. Use the following commands to gather information about your OSPFv2 multiarea implementation. show show show show show ip ip ip ip ip protocols route ospf database ospf interface ospf neighbor Reflection Questions 1. Which router(s) are internal routers? 2. Which router(s) are backbone routers? 3. Which router(s) are area border routers? 4. Which router(s) are autonomous system routers? 5. Which routers are generating Type 1 LSAs? 6. Which routers are generating Type 2 LSAs? 7. Which routers are generating Type 3 LSAs? 8. Which routers are generating Type 4 and 5 LSAs? 9. How many inter area routes does each router have? © 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 3 Packet Tracer – Configuring Multiarea OSPFv2 10. Why would there usually be an ASBR in this type of network? Suggested Scoring Rubric Packet Tracer scores 80 points. Each of the Reflection Questions is worth 2 points. © 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Betty Staerk Create Date : 2018:04:27 16:16:57-07:00 Modify Date : 2018:04:27 16:20:05-07:00 Has XFA : No Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Creator Tool : Microsoft® Word 2016 Metadata Date : 2018:04:27 16:20:05-07:00 Producer : Microsoft® Word 2016 Format : application/pdf Creator : Betty Staerk State : 1 Version : 1.1 Document ID : uuid:8017dbbe-a613-4e37-a57d-8e6522fade7c Instance ID : uuid:5e48d2c8-2b48-414f-82bb-92dc385c9a3e Page Count : 3EXIF Metadata provided by EXIF.tools