ADVC110 User Manual ADVC 110

User Manual: ADVC-110

Open the PDF directly: View PDF .
Page Count: 20

Download
Open PDF In Browser	View PDF

User Manual

September 18, 2007

Notices and Warranties
Notices & W
Warraties
arraties

Copyright Regulations
It is illegal for anyone to violate any of the rights provided by the copyright laws to the owner of
copyright, except for fair use (mainly private noncommercial use). Also, in certain cases copying is
prohibited with no exceptions. In no event shall Grass Valley be liable for any direct or indirect damages whatsoever arising from the use of captured materials.

Warranty
Your ADVC110 options are covered by a limited warranty when you register your Grass Valley product. This warranty is for a period of one year (or two years in European Union countries) from the date
of purchase from Grass Valley or an authorized Grass Valley agent. This warranty applies only to the
original purchaser of the Grass Valley product and is not transferable, Grass Valley warrants that for this
period the product will be in good working order. Should our product fail to be in good working order,
Grass Valley will, at its option, repair or replace it at no additional charge, provided that the product has
not been subjected to misuse, abuse or non-Grass Valley authorized alternations, modifications and/or
repair.
Proof of purchase is required to validate your warranty.
Grass Valley is not responsible for any lost profits, lost savings or other incidental or consequential
damages arising out of the use of, or inability to use, this product. This includes damage to property
and, to the extent permitted by law, damages for personal injury. This warranty is in lieu of all other
warranties of merchantability and fitness for a particular purpose.

Notices & W
arraties
Warraties
Notices and Warranties
2

Notices and Warranties
Notices & W
Warraties
arraties
DANGER
The following conditions indicate the potential for serious bodily injury or loss of life.

Health precautions
In rare cases, flashing lights or stimulation from the bright light of a computer monitor display may
trigger temporary epileptic seizures or loss of consciousness. It is believed that even individuals
whom have never experienced such symptoms may be susceptible. If you or close relatives have
experienced any of these symptoms, consult a doctor before using this product.

Do not use in environments requiring a high degree of reliability and safety
This product is not to be used in medical devices or life support systems. The characteristics of this
product are not suited for use with such systems.

Protect against static electricity
An electrostatic discharge may damage components of this product. Do not directly touch any of the
connectors or component surfaces.
Static electricity can be generated on clothing and on people. Before handling the product, discharge
static electricity from your body by touching a grounded metal surface.

Do not disassemble

Do not operate at other than the specified voltage
Do not operate at other than the specified voltages of AC 100–240V. Operation at other than the rated
voltage may result in fire or malfunction.

Do not operate with an unofficial AC adapter
Do not operate with an unofficial AC adapter, or with a car power supply. Such operation may result
in fire or malfunction.

Handle the IEEE1394 cable carefully
Do not place heavy objects on top of the cable, or place it near hot objects. Doing so may damage the
cable and result in fire, electrical shock, or malfunction. Altering the cable, or excessively bending or
pulling the cable may result in fire or electrical shock. If the cable is damaged, please contact your
local retail outlet or Grass Valley directly.

Notices & W
Warraties
arraties
Notices and Warranties

Do not remove the cover or modify the ADVC110. Fire, electric shock or malfunction may result. For
internal inspection or repair, please contact your system integrator or Grass Valley directly.

Notices and Warranties
Notices & W
Warraties
arraties
CAUTION
The following conditions indicate the potential for bodily harm, damage to hardware or loss of data.

Do not pull on the FireWire cable when disconnecting from electrical outlet
When disconnecting the FireWire cable, pull on the plug, not the cable itself. Pulling on the cable can
damage the cable and may result in fire or electric shock.

Do not touch AC adapter(optional) with wet hands
Do not disconnect or plug in the AC adapter(optional) when your hands are wet. Contact with water
may result in electric shock, fire or damage.

Do not setup in an area that becomes hot
Do not setup in an area exposed to direct sunlight or near a heating apparatus. The heat can accumulate, causing burns, fire or damage. Also, the unit may become deformed or change color.

Do not setup other than the prescribed method
Do not setup in a manner other than prescribed. Do not use while wrapped in cloth or plastic. Heat
can accumulate, causing burns, fire or damage.

If product will not be used for an extended period
If this product will not to be used for an extended period of time, disconnect the AC adapter(optional)
from the electrical outlet.

Notices & W
arraties
Warraties
Notices and Warranties
4

All cables used to connect peripherals and other devices must be shielded and
grounded
Operation with cables, connected to peripherals and other devices, that are not shielded and grounded
may result in failure of this product.

Notices and Warranties
Notices & W
Warraties
arraties

Product Notes
1. Unauthorized copying of a portion or the entirety of this product is prohibited.
2. The description and specifications of this product are subject to future change without notice.
3. The description of this product has been prepared to be as complete as possible. If the reader is
aware of any questionable points, errors or omissions, please contact Grass Valley.
4. The company assumes no liability for the results of practical application, regardless of item (3)
above.

Notices & W
Warraties
arraties
Notices and Warranties

5. Regardless of whether negligence occurs during usage, the company assumes no liability, even if
there is a claim, for extraordinary, incidental or derivative loss, including the loss of profits, that
arise during practical application of this product.

Notices and Warranties

Chapter 1
Basic Instructions
The ADVC110 is a simple solution
for converting your analog tapes,
such as VHS and S-VHS, to DV in
realtime. This manual guides you
through the basics of analog/digital
c o n v e r s i o n . Pa c ka g e c o n t e n t s
include:
 ADVC110 unit
 FireWire Cable (6 pin-6 pin)

Basic Instructions
Basic Instructions

QuickStart
If you want to jump right in and use the ADVC110, simply plug it in
and follow these steps.

Info
If you are capturing PAL video,
you need to change the DIP
switch settings. For more info,
see Setting DIP switches on page
16.

1. Insert the FireWire cable (6 pin - 6 pin) to the DV IN/OUT terminal
on the rear panel, to connect the ADVC110 unit to your computer.

Caution
All cables used to connect
peripherals and other devices
must be shielded and grounded.
Operation with cables,
connected to peripherals and
other devices, that are not
shielded and grounded may
result in failure of this product.

Basic Instructions
Basic Instructions
8

2. If you are capturing video from an analog video, make sure the
ADVC110 is set to Analog In and that the video is connected to the
unit’s S-Video or composite ports on the front of the unit.
If you are exporting video to an analog video, make sure the
ADVC110 is set to Digital In and that the video is connected to the
unit's S-Video or composite ports on the back of the unit.
3. You can now open your editing application and begin capturing
video.

Basic Instructions
Basic Instructions

ADVC110 Basics
The front of the ADVC110 contains inputs for composite, S-Video and
DV. The DV input is a 4-pin FireWire port and can do both input and
output.

Input Select button
The Input Select button on the top of the unit lets you toggle between
Digital In and Analog In modes. A blue light signifies which mode the
ADVC110 is using. The Input Select button will not work while the
both status lights are blinking.

Info
Connected to a PC with an IEEE
1394 cable, ADVC110 can operate
without the AC adapter. In other
cases, use an official AC adapter
(optional) for the power supply.
In case the bus power is too low,
the AC adapter is also required.

y Digital In - Indicates that the ADVC110 is ready to receive digital video.
y Analog In - Indicates that the ADVC110 is ready to receive analog video.

Status light

y Analog In - The status light blinks when a Macrovision-protected
signal is detected.
y Digital In - The status light blinks when the DV audio is set at 32kHz
12bit, which is used for 4-channel DV audio. See 4-channel mixing
mode on page 17 for more information.

Basic Instructions
Basic Instructions

The Status light indicates separate things depending on which mode
you are using.

Basic Instructions
Basic Instructions

Connection P
orts
Ports
The front panel of the ADVC110 has connection ports for both S-Video
and composite input, as well as a 4-pin FireWire input/output port.

The back panel of the unit has ports for both S-Video and composite
output, as well as a 6-pin FireWire input/output.

Basic Instructions
Basic Instructions
10

Basic Instructions
Basic Instructions

Select Input modes
ADVC110 has 2 INPUT modes; ANALOG IN and DIGITAL IN.

ANALOG IN mode
Input Analog signal is
converted to Digital signal,
which is converted to Analog
signal before it is output.
Outputs converted
Digital signal.

ANALOG IN LED is lit.

Inputs Analog signal.
Outputs converted Digital signal.

(Optional)
None displayed

Basic Instructions
Basic Instructions

ADVC110 can output 2 DV signals.
However, if the unit is connected to your computer, the DV signal is
output only to your computer. Even though you connect a device to
the other port, DV signal IS NOT output to that port.

Basic Instructions
Basic Instructions
DIGITAL IN mode
Outputs converted
Analog signal.

DIGITAL IN LED is lit.

Info
There are few PC that can control
multiple devices, do not use the
ADVC110 in the Hub connection
where multiple DV signals are
input simultaneously).

Inputs DV signal either
from the 4 pin connector
on the front panel or the
6 pin connector on the
rear panel.

Input Analog signal is
ignored.

How to switch modes
ANALOG IN mode

Press the STOP or the REC (REC PAUSE)
button of the deck control interface
on the capturing application.

PU
T

Press the PLAY (PLAY PAUSE)
button of the deck control interface
on the capturing application.

tto

DIGITAL IN mode

Basic Instructions
Basic Instructions
12

Color Bar Output
Press and hold the INPUT SELECT button for three seconds to output
color bars from the Analog output. Input Analog and Digital signals
are ignored, while the audio is muted.
Outputs color bars.

Both LEDs are lit.

Input Analog signal is ignored.
Input Digital signal is ignored.

Basic Instructions
Basic Instructions
Audio Capturing mode
In the normal operation of the INPUT modes, audio stream will not be
output while the video signal is not input. If you want to capture the
audio alone, follow the steps below to switch to the Audio Capturing
mode.
1. Press the INPUT SELECT button on the front panel to switch to the
ANALOG IN mode.
The ANALOG IN LED will be lit.
2. Set the DIP switch 1 on the bottom to the other side from the current position.

Info
To switch back to the normal
input mode, set the DIP switch
1 back to the original position.

Example: Move the Switch 1 to ON if it's currently in OFF position.

STAUS LED is lit, while the DIGITAL IN and ANALOG IN LEDs are
unlit.
3. Play the audio data to capture.
4. Capture the audio data on your computer.

Caution
If video signal is input during
the Audio Capturing mode, the
subsequent operations can not
be guaranteed.

NOTE:

In that event, please switch back to the normal mode, set the deck
status "PLAY", and then switch to the Audio Capturing mode again.
Note that you can set the deck status "PLAY" in either of the following method.
x Press the PLAY button on the application
x Change to the Digital In mode by pressing the INPUT SELECT
button on the ADVC110 unit, and change back to the Analog In
mode by pressing the button again.

Caution
When the input source is
paused or stopped in the Audio
Capturing mode, it cannot be
captured.

Basic Instructions
Basic Instructions

Switch to the Audio Capturing mode, only when the Deck Status
from the application's point of view is "PLAY". Otherwise, the subsequent operations cannot be guaranteed.

Basic Instructions
Basic Instructions

Basic Instructions
Basic Instructions
14

Chapter 2
Using ADVC110
This chapter explains basic
instructions for using the
ADVC110.

Using ADVC110
Using ADVC110

Setting DIP switches
Use the DIP switches on the bottom of the unit to modify the ADVC110's
functionality. Make sure the power is turned off before you make any
changes.
Table 1: DIP Switch Settings
No. Mode

OFF

Digital-in Reference Sync

Stream Sync

Fixed

Power-on Input Mode

Analog

Digital

Audio Mode

48kHz/16-bit

32kHz/12-bit

Locked Audio Mode

Locked

Unlocked
7.5 IRE

5
6

NTSC Setup Level(SW6=OFF)

0 IRE

PAL/SECAM(SW6=ON)

PAL

SECAM

Video Format

NTSC

PAL

By default, DIP switches 1, 3, 4, 5 and 6 are in the OFF position,while
DIP switch 2 is in the ON position.
* The DIP switch settings may differ depending on the region of shipment.

y Digital-in Reference Sync Mode - toggles between Stream Sync
and Fixed modes. To make the Video Sync synchronized with the
DV Stream Sync, set this Switch in the OFF position. If you set this
switch in the OFF position and the color of the output video becomes black and white, set this switch in the ON position, making
the Video Sync happen in the fixed timing.

Using ADVC110
Using ADVC110
16

y Power-on Input Mode - toggles between Analog In and Digital In
modes when you first turn on the unit. If you primarily capture
analog video, you should set this to the OFF position so the unit is
in Analog In mode when you turn it on.

Info
Input Analog SECAM signal will
be captured in DV PAL signal. In
this occasion, the color of the
Analog output signal cannot be
guaranteed. When you reconvert the captured DV signal to
Analog signal, Analog PAL signal
will be output, instead of Analog
SECAM signal.

y Audio Mode - toggles between 48kHz/16-bit 2-channel audio and
32kHz/12-bit 4-channel audio. See Setting 4-channel mixing mode
in the next section for more information.
y Locked Audio Mode - toggles between capturing locked audio or
unlocked audio. If you are capturing a lot of long clips, you should
leave this switch in the OFF position to make sure the audio stays
locked to the video.
y NTSC Setup Level - toggles between 0 IRE (Japan NTSC) and 7.5
IRE (USA NTSC).
y PAL/SECAM - specifies PAL or SECAM, when the DIP switch 6 is in
the ON position (set to PAL).
y Video Format - toggles between capturing NTSC and PAL video.
The ADVC110 is set to capture NTSC video by default.

Using ADVC110
Using ADVC110

4-channel mixing mode
When encoding DV to analog in 32kHz mode, the unit can be set to
either:
1. Use the main audio channel (48kHz/16bit 2-channel mode or 32kHz/
12bit 4-channel mode)
2. Mix main and sub channel at 50% each. (4-channel mixing mode)

Setting 4-channel mixing mode
1. Set DIP switch 3 to the ON position.
2. Press and hold the Input Select button when turning on the unit.
3. The STATUS LED is lit, when the ADVC110 is in Digital IN mode.

Bus power

Power to the ADVC110 must be supplied through the AC Adapter if
the ADVC110 is connected to the computer with an analog cable or a
4-pin FireWire cable.

Macrovision detection
When Macrovision signals are detected by the ADVC110:
x The brightness and contrast for both analog and DV output are
lowered.
x The Status light blinks

Using ADVC110
Using ADVC110

If you connect the ADVC110 unit to your computer with only the 6-pin
FireWire cable, it can be powered by the FireWire port and doesn't
need the AC Adapter.
If the ADVC110 unit is always connected to your system, it will automatically be turned on or off, whenever you start up or shut down
your computer.

Using ADVC110
Using ADVC110

DVC
AM support
DVCAM
When you are connecting to a DVCAM unit, set DIP switch 4 to the
OFF position to set the ADVC110 to Locked Audio Mode.

Video signals from game consoles
If you are capturing from a video source with irregular video signals,
such as game consoles, you may hear audio noise in the captured
video. If this happens, try setting DIP switch 4 to the ON position so
the audio is unlocked.

Using with Grass V
alley DV products
Valley
* AC adapter (optional) is required.
When the ADVC110 is connected to your Grass Valley DV products,
use the following setting.

Info
When the ADVC110 is connected
to your computer with the other
cable than a FireWire cable (6 pin
- 6 pin), use the AC adapter to
supply power.

Using ADVC110
Using ADVC110
18

1. When the ADVC110 is connected to a Grass Valley DV product:
Set the input mode according to the input signal.
2. When a Grass Valley DV product is connected to a DV IN/OUT
port, and a DV camera to the other DV IN/OUT port:
Set the input mode to DIGITAL IN.

Using ADVC110

᳝↦᳝ᆇ⠽䋼৿᳝㸼 (This information is applicable for People's Republic of China only.)
ѻકЁ᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴ⱘৡ⿄ঞ৿䞣

᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴
䚼ӊৡ⿄

杔
3E

㻭
+J

柘
&G

⏼ↆ杻
&U 9,

勩䅃勣啾
3%%

勩䅃ℛ啾搩
3%'(

⬉㓚

䂾

໪໇

䂾

⛞䫵

䂾

⬉䏃ᵓ

䂾

⬉ᄤ‫ܗ‬ӊ

㬍

䂾

Using ADVC110

ƻ˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼6-7ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖ҹϟǄ
h˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ6-7ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖Ǆ

Using ADVC110

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2008:05:09 19:03:07+09:00
Metadata Date                   : 2011:04:28 10:35:31+09:00
Modify Date                     : 2011:04:28 10:35:31+09:00
Creator Tool                    : Adobe InDesign CS2_J (4.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6902 bytes, use -b option to extract)
Document ID                     : adobe:docid:indd:7bc66339-1da8-11dd-b99e-e3852bc7e62c
Instance ID                     : uuid:bedfcde9-f9bf-47cc-a83e-7b663554c7b1
Rendition Class                 : proof:pdf
Manifest Link Form              : ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches
Manifest Reference Instance ID  : uuid:02472798-e5f3-47ec-b57e-3e0c5a2a3fef, uuid:0856eb1e-3a7d-4d7b-b9df-698c165fb6e0
Manifest Reference Document ID  : uuid:57b8a671-f728-4ed1-a31c-2c6f62b23319, uuid:6310427c-d126-4a1e-9a42-447f9e69d6bd
Format                          : application/pdf
Title                           : ADVC110 User Manual
Creator                         : Grass Valley K.K.
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Page Layout                     : SinglePage
Page Count                      : 20
Author                          : Grass Valley K.K.

EXIF Metadata provided by EXIF.tools

ADVC110 User Manual ADVC 110

Navigation menu

Versions of this User Manual:

Views

Navigation