ASWC1 Ford Falcon BA BF Fitting Guide

ASWC1 Ford Falcon BA-BF Fitting Guide

User Manual:

Open the PDF directly: View PDF .
Page Count: 2

ASWC-1 GUIDE FOR BA-BF FALCON

**** DO NOT PLUG ASWC1 PATCH LEAD INTO HEAD UNIT UNTIL LAST STEP ****

Learning the Vehicle & Programming the Head unit.

•Press and hold the Reset button down for approx 10 seconds until the LED begins a slow

constant flash.

•Press and hold the Volume Up button on the steering wheel for 7 seconds until the led goes

solid Green.

•Press and hold the Volume Down button until the led goes solid Green.

•Press and hold the Seek button until the led goes solid Green.

•Press and hold the Volume Up button on the steering wheel for 7 seconds until flashes

rapidly.

•Press and hold the Volume Down for approx 5 seconds.

•Cycle vehicle off and on.

•Press and hold the Volume Down for 15 seconds the LED will turn solid.

•Press Volume up the amount of times that your head unit is listed below, when the desired

radio type has been reached. (EG – 6 Times for Pioneer)

•Press the Volume Down button to lock in head unit.

•Your stereo should now be programmed and the LED will turn off.

Note: If at any time the user fails to press any button for a period of 10 seconds or more, this

programming mode will abort.

Radio Legend

1. Eclipse (Type 1)

2. Kenwood

3. Clarion (Type 1)

4. Sony and Dual

5. JVC

6. Pioneer and Jensen

7. Alpine

8. Visteon

9. Valor

10. Clarion (Type 2)

11. Metra OE

12. Eclipse (Type 2)

13. LG

14. Parrot*

15. XITE

* AX-SWC-PARROT is required (sold separately) and the radio must

be updated to rev. 2.1.4 or higher. Additionally, the ASWC-1 must be

updated to the most recent firmware available.

Note: If you have a Clarion radio and the ASWC-1 did not work try the

other Clarion radio type, same for the Eclipse.