Civic Platform 8.0 Configurer's Guide Accela Configurers

User Manual:

Open the PDF directly: View PDF .
Page Count: 514

Download
Open PDF In Browser	View PDF

Version 8.0

Accela Civic Platform®

Configurer’s Guide

Accela Civic Platform Configurer’s Guide
© 2015 Accela, Inc. All rights reserved.
Accela, the Accela logo, the Accela logo with “Government Software” notation, Accela Automation, Accela
Asset Management, Accela Citizen Access, Accela Mobile Citizen Access, Accela ERS, Accela GIS, Accela
IVR, Accela Land Management, Accela Licensing, Accela Mobile Office, Accela Public Health and Safety,
Accela Service Request, Accela Wireless, Kiva DMS, Kiva Development Management System, 'PERMITS'
Plus, SiteSynch, Tidemark Advantage, VelocityHall, Vantage360, and other Accela logos, devices, product
names, and service names are trademarks or service marks of Accela, Inc. Brava! Viewer is a trademark of
Informative Graphics Corporation. Windows is a registered trademark of Microsoft Corporation. Acrobat is a
trademark of Adobe Systems Incorporated. Portions copyright 2009 Ching-Lan 'digdog' Huang and digdog
software. All other company names, product names, and designs mentioned herein are held by their
respective owners.

Version 8.0
October 2015
Corporate Headquarters
2633 Camino Ramon
Suite 500
Bishop Ranch 3
San Ramon, CA 94583
Tel: (888) 722-2352
Fax: (925) 659-3201

www.accela.com

| Contents | 3

Contents
Introduction.................................................................................................. 31
Understanding Function Identifications............................................................................................. 31
Understanding Standard Choices..................................................................................................... 32

Working With FIDs and Standard Choices..................................................33
Working with Standard Choices........................................................................................................33
Working with FIDs............................................................................................................................. 39

FIDs and Standard Choices Cross Reference............................................ 42
Administration.................................................................................................................................... 42
Civic Platform Setup Portlets................................................................................................. 42
Classic Admin Tools............................................................................................................... 49
Organizations and Users...................................................................................................................57
Organization Administration....................................................................................................57
User Group and User Administration..................................................................................... 57
Password Security.................................................................................................................. 57
Multiple Agency Administration.............................................................................................. 57
Search................................................................................................................................................58
Configuring Global Search..................................................................................................... 59
Configuring ‘PERMITS’ Plus Search...................................................................................... 59
Configuring Nearby Query......................................................................................................60
User View.......................................................................................................................................... 60
Configuring the Civic Platform Console................................................................................. 61
Configuring the Form Layout Editor....................................................................................... 62
Accessing QuickQueries.........................................................................................................62
Configuring a Logo or Grade Card........................................................................................ 62
Configuring Shared Drop-Down Lists.....................................................................................62
Configuring Customized Display............................................................................................ 63
Accessing SmartCharts.......................................................................................................... 63
Configuring Reports................................................................................................................ 63
System Automation........................................................................................................................... 63
Configuring Security Policies..................................................................................................63
Configuring Autonumbers....................................................................................................... 64
Configuring Integration with Social Media..............................................................................64
Configuring Import/Export....................................................................................................... 65
Configuring Event Manager....................................................................................................65
Spell Checker......................................................................................................................... 65

| Contents | 4

People................................................................................................................................................ 66
Configuring People Template Fields...................................................................................... 66
Configuring Reference Contacts............................................................................................ 67
Configuring Licensed Professional Types.............................................................................. 68
Address, Parcel and Owners (APO)................................................................................................. 68
Configuring Addresses............................................................................................................68
Configuring Parcels................................................................................................................ 69
Configuring Common APO and External APO Features........................................................70
Electronic Document Review............................................................................................................ 72
Configuring the Check-In Revisions Button........................................................................... 72
Configuring EDR Access........................................................................................................ 72
Configuring Action Type Choices on the Document Audit Log.............................................. 73
Configuring EMSE Events to Streamline Workflow................................................................73
Workflow............................................................................................................................................ 74
Workflow Administration......................................................................................................... 74
Configuring Daily Workflow Management Tab....................................................................... 75
Record Management......................................................................................................................... 76
Record Type Administration................................................................................................... 77
Configuring ASI and ASI Tables............................................................................................ 77
Synchronizing Reference Data with Records.........................................................................78
Configuring Record Access.................................................................................................... 79
Creating Records.................................................................................................................... 79
Deleting Records.................................................................................................................... 79
Configuring Associations with Records.................................................................................. 80
Accessing the Record Detail Audit Log................................................................................. 81
Calendars...........................................................................................................................................81
Calendar Administration..........................................................................................................81
Configuring Calendars............................................................................................................ 83
Communication Manager...................................................................................................................83
General Settings..................................................................................................................... 83
Account Settings.....................................................................................................................84
Message Settings................................................................................................................... 84
Accounting......................................................................................................................................... 84
Fee Item Administration..........................................................................................................84
Managing Fees in Records.................................................................................................... 85
Configuring Payments............................................................................................................ 86
Configuring Invoice Options................................................................................................... 88
Configuring Trust Accounts.................................................................................................... 89
Configuring Cashier Workstation............................................................................................90

| Contents | 5

Configuring Valuation Calculation.......................................................................................... 91
Configuring Void and Refund Reason Options...................................................................... 91
Time Accounting Tracker.................................................................................................................. 91
Time Accounting Administration............................................................................................. 91
Configuring a List of Agency Vehicles................................................................................... 92
Configuring the Time Accounting Portlet................................................................................92
Adding Time Accounting Entries in Inspections and Workflow.............................................. 92
Streamlining Data Processing........................................................................................................... 92
Accessing Expression Builder................................................................................................ 93
Configuring Conditions............................................................................................................93
Configuring Sets..................................................................................................................... 95
Configuring Audit Log............................................................................................................. 96
Configuring the Batch Engine................................................................................................ 97
Land Management.............................................................................................................................97
Configuring Structures and Establishments........................................................................... 97
Configuring Enforcement and Case Management................................................................. 98
Configuring Plan Review........................................................................................................ 99
Configuring Inspections........................................................................................................ 100
Asset Management..........................................................................................................................103
Configuring Assets................................................................................................................103
Configuring Part Inventory....................................................................................................105
Configuring Work Orders......................................................................................................106
Configuring Asset Condition Assessments...........................................................................107
Configuring PM Schedules................................................................................................... 108
License and Case Management..................................................................................................... 108
Configuring License Renewal...............................................................................................109
Configuring Expired Licenses and Insurance Coverage Verification....................................109
Configuring Licensed Professional Providers.......................................................................109
Configuring Education...........................................................................................................110
Accessing Continuing Education Records........................................................................... 110
Accessing Examination Records.......................................................................................... 110
Configuring Reasons of Rescheduling or Cancelling Examination...................................... 110
Citizen Access Administration......................................................................................................... 111
Internationalization and Localization............................................................................................... 112
Enabling Internationalization and Localization..................................................................... 112
Supporting I18N Addresses Fields.......................................................................................112
Configuring Phone Number Country Codes.........................................................................112
Setting ASI Fields to Right Justification............................................................................... 112
Setting Report Language Preferences................................................................................. 112

| Contents | 6

Standard Choices Reference.................................................................... 114
DOCUMENT_REVIEW_STATUS (User-defined Name)................................................................. 114
DOCUMENT_STATUS (User-defined Name)................................................................................. 114
EDMS_FUNCTION (User-defined Name)....................................................................................... 115
State/Province (User-defined Name).............................................................................................. 116
VIRTUAL FOLDERS (User-defined Name).................................................................................... 117
AA_EDMS_DISALLOWED_FILE_TYPES....................................................................................... 117
ACA_AGENCY_EMAIL_REGISTRATION_TO................................................................................117
ACA_AUTO_ASSIGN_INSPECTOR............................................................................................... 118
ACA_CACHE_CONFIG................................................................................................................... 118
ACA_CONDITION_AGENCY_USER.............................................................................................. 119
ACA_CONFIGS............................................................................................................................... 119
ACA_CONFIGS_LINKS................................................................................................................... 124
ACA_CONFIGS_TABS.................................................................................................................... 127
ACA_CONNECT_LICENSE_AUTO_APPROVED...........................................................................129
ACA_EMAIL_TO_AND_FROM_SETTING...................................................................................... 129
ACA_EMAIL_REGISTRATION_TO................................................................................................. 129
ACA_EMAIL_REGISTRATION_FROM........................................................................................... 130
ACA_FILTER_CAP_BY_LICENSE..................................................................................................130
ACA_PAGE_PICKER...................................................................................................................... 131
ACA_SECURITY_SETTING............................................................................................................ 131
ACA_SPELL_CHECKER_ENABLED.............................................................................................. 132
ADHOC_REPORT_DB_VIEW......................................................................................................... 132
ADDRESS_TYPE............................................................................................................................ 133
ADDRESSSET_SCRIPT_LIST........................................................................................................ 133
AGENCY_EMAIL_REGISTRATION_TO......................................................................................... 134
ALLOW_NEGATIVE_FEE_TRANSFER_AS_CREDIT....................................................................134
ALLOW_PAYMENT_OF_FUTURE_FEES...................................................................................... 135
ALLOW_SHARED_DROPDOWN_LIST.......................................................................................... 135
ALLOW_STANDARD_DUPLICATE_FILENAME.............................................................................135
APO_ATTACHMENT_SELECTION.................................................................................................136
APO_CHECK_DUPLICATE.............................................................................................................136
APO_SUBDIVISIONS...................................................................................................................... 136
APO_SUBDIVISIONS_LOTS_[subdivision name].......................................................................... 137
APOSE_SYNCHRONIZE................................................................................................................ 137
APPLICATION SPEC INFO UNIT...................................................................................................138
APPLICATION_STATUS_REASON................................................................................................ 138
APPLICATION_TYPE_SECURITY_FID.......................................................................................... 139
APPLY_ SYSTEM_ DEFAULT_ FORMAT..................................................................................... 140

| Contents | 7

ASI_ALIGNMENT_OPTIONS.......................................................................................................... 141
ASI_CONFIGS................................................................................................................................. 141
ASI_EDIT_CONTROL_SYSTEM_LEVEL........................................................................................142
ASSET_CALENDAR_BUILD_INDEX_DURATION......................................................................... 143
ASSET_GROUP.............................................................................................................................. 143
ASSET_TREE_NODE_CONFIG..................................................................................................... 143
ASSET_SIZE_UNIT......................................................................................................................... 145
ASSET_USAGE_UNIT_TYPE......................................................................................................... 145
AUDITSET_INSPECTION_SCRIPT_LIST.......................................................................................146
AUDITSET_SCRIPT_LIST.............................................................................................................. 146
AUTHORIZED_SERVICE................................................................................................................ 146
AUTO_GENERATE_RECEIPT........................................................................................................147
AUTO_INVOICE_MODULE............................................................................................................. 147
AUTO_OPEN_CASH_DRAWER..................................................................................................... 148
AUTO_PAY_TRUST_ACCOUNTS..................................................................................................148
AUTO_SYNC_PEOPLE...................................................................................................................149
BATCH_INVOICE_REPORT........................................................................................................... 149
BATCH_JOB_PM_ADVANCE_PERIOD......................................................................................... 150
BATCH_JOB_RESULT....................................................................................................................150
BATCH_JOB_SCHEDULE_FREQUENCY......................................................................................150
BATCH_JOB_SCHEDULE_TYPE................................................................................................... 151
BATCH_JOB_SERVER................................................................................................................... 151
BATCH_JOB_SERVICE_CATEGORY............................................................................................ 152
BATCH_JOB_STATUS....................................................................................................................152
BATCH_JOB_TYPE........................................................................................................................ 153
BUDGET_ACCOUNT...................................................................................................................... 153
CALENDAR_BLOCK_SIZE............................................................................................................. 153
CALENDAR_BLOCK_UNIT............................................................................................................. 154
CALENDAR_SETTING.................................................................................................................... 154
CAP_CHILD_DOCUMENT.............................................................................................................. 155
CAP_CREATE_SETTINGS............................................................................................................. 155
CAP_DETAIL_ICON_FILE_FORMATS........................................................................................... 156
CAP_RETAIN_FEESCHEDULE...................................................................................................... 156
CAPSET_SCRIPT_LIST.................................................................................................................. 157
CASH_DRAWER_STARTING_ENDING_BALANCE...................................................................... 157
CASHIER_STATION....................................................................................................................... 157
CENSUS_BUREAU_CONSTRUCTION_TYPE_CODE.................................................................. 158
CLONE_REFERENCE_CONDITION.............................................................................................. 158
COMMUNICATION_SMS_PROVIDERS......................................................................................... 159

| Contents | 8

COMPLAINT REFERRED SOURCE.............................................................................................. 159
COMPLAINT REFERRED TYPE.................................................................................................... 159
CONDITION_PRIORITIES...............................................................................................................160
CONDITION TYPE.......................................................................................................................... 160
CONDITIONS_OF_APPROVALS....................................................................................................161
CONTACT_ACROSS_AGENCIES.................................................................................................. 161
CONTACT_ADDRESS_TYPE......................................................................................................... 162
CONTACT_PREFERRED_CHANNEL............................................................................................ 163
CONTACT RELATIONSHIP............................................................................................................ 164
CONTACT TYPE............................................................................................................................. 164
CONTACT_TYPE_ENABLE............................................................................................................ 166
CONTENT_TEMPLATE_LIST......................................................................................................... 166
CONTINUING_EDUCATION_REQUIRED_HOURS....................................................................... 167
CONTINUING_EDUCATION_WORKFLOW_TASK_STATUS........................................................ 167
COST_FACTOR.............................................................................................................................. 167
COUNTRY....................................................................................................................................... 168
CREATE_NEW_INSPECTION_WHEN_RESCHEDULE.................................................................169
CREATE_NEW_ITEM_DEFAULT_SIZE......................................................................................... 169
CREATE_NEW_ITEMS................................................................................................................... 170
CUSTOMIZED_TRACKING_NBR................................................................................................... 170
DATA_MANAGER_MAX_RECORD_NUMBER.............................................................................. 170
DEBUG............................................................................................................................................ 171
DEFAULT_LIST_ROWS.................................................................................................................. 171
DEFAULT_HOUSING_UNITS......................................................................................................... 171
DEFAULT_NUMBER_BUILDINGS..................................................................................................172
DEFAULT_JOB_VALUE.................................................................................................................. 172
DEFAULT_TEMPLATE....................................................................................................................173
DEPARTMENT_PICKER_TYPE......................................................................................................173
DEPOSIT_FOR................................................................................................................................173
DISABLE_APO_TEMPLATE_DATA_VALIDATION........................................................................ 174
DISABLE_CITY_STATE_DEFAULT................................................................................................174
DISABLE_EXPAND_RECORDSET.................................................................................................175
DISABLE_FEE_CALC_FACTOR_DROPDOWN_FOR_MODULES............................................... 175
DISABLE_GIS_NEARBY_QUERY.................................................................................................. 175
DISPLAY_INSPECTION_COMMENT_IN_ACA.............................................................................. 176
DISPLAY_RECORD_DOCUMENTS (INSPECTION)......................................................................176
DISPOSITION.................................................................................................................................. 176
DOCUMENT_AUDIT_ACTION_TYPES.......................................................................................... 177
E_CODES........................................................................................................................................ 177

| Contents | 9

EDMS...............................................................................................................................................177
EDUCATION_DEGREE...................................................................................................................178
E-MAIL_PAYMENT_NOTICE_DISABLE......................................................................................... 179
EMSE_Settings................................................................................................................................ 179
ENABLE_ADD_MULTIPLE_CONDITIONS..................................................................................... 180
ENABLE_AMO_ONLINE_REPORT................................................................................................ 180
ENABLE_ANONYMOUS_REPORT................................................................................................ 180
ENABLE_AUTO_POPULATE_PARCEL_OWNER..........................................................................181
ENABLE_CAP_TYPE_ALIAS.......................................................................................................... 181
ENABLE_CONDITION_RESOLVED_DATE....................................................................................181
ENABLE_CONTACT_ADDRESS.................................................................................................... 182
ENABLE_CONTACT_ADDRESS_VALIDATION.............................................................................182
ENABLE_CONTACT_TYPE_FILTERING_BY_MODULE............................................................... 183
ENABLE_CONTACT_TYPE_SECURITY........................................................................................ 184
ENABLE_DISPLAY_ISLAMIC_CALENDAR....................................................................................184
ENABLE_EMSE...............................................................................................................................185
ENABLE_EMAIL_NOTIFICATION_PROMPT................................................................................. 185
ENABLE_EXPIRED_LICENSE........................................................................................................186
ENABLE_EXPRESSION_AND_SCRIPT_CACHE.......................................................................... 186
ENABLE_MULTIPLE_CONDITION_GROUP_FOR_TYPE............................................................. 186
ENABLE_ORIGINAL_VALUATION_CALCULATOR....................................................................... 187
ENABLE_PARCEL_ENDORSEMENT.............................................................................................187
ENABLE_PAYMENT_ENDORSEMENT..........................................................................................188
ENABLE_PERMITS_PLUS_SEARCH.............................................................................................188
ENABLE_SELECT_ADDRESS_OWNER_AFTER_PARCEL..........................................................188
ENABLE_SELECT_PARCEL_OWNER_AFTER_ADDRESS..........................................................189
ENABLE_THE_DISPLAY_OF_SECURITY_ANSWER....................................................................189
ENFORCEMENT DEFENDANT EYE COLOR................................................................................189
ENFORCEMENT DEFENDANT HAIR COLOR.............................................................................. 189
EVENT_ACTION............................................................................................................................. 190
EVIDENCE_DISPOSITION............................................................................................................. 190
EVIDENCE_LOCATION.................................................................................................................. 190
EVIDENCE_TYPE........................................................................................................................... 191
EVIDENCE_UNITS_MEASURE...................................................................................................... 191
EXAM_CSV_FORMAT.................................................................................................................... 191
EXAMINATION_WORKFLOW_TASK_STATUS............................................................................. 193
EXPIRATION_INTERVAL_UNITS................................................................................................... 193
EXPIRATIONDATE_DISPLAY_FLAG............................................................................................. 193
EXPORT_MAX_RECORDS.............................................................................................................193

| Contents | 10

EXTERNAL_ADDRESS_SOURCE................................................................................................. 194
EXTERNAL_CONTACT_ADDRESS_SOURCE_[SOURCE NAME]............................................... 195
EXTERNAL_DOC_REVIEW............................................................................................................ 195
EXTERNAL_OWNER_SOURCE..................................................................................................... 196
EXTERNAL_PARCEL_SOURCE.................................................................................................... 197
EXTERNAL_PROVIDER_ADAPTER.............................................................................................. 198
EXTERNAL_REVIEWERS.............................................................................................................. 199
FEE_QUANTITY_ACCURACY........................................................................................................199
FILE_UPLOAD_BEHAVIOR............................................................................................................ 200
FIND APP DATE RANGE............................................................................................................... 201
FIND_TIME_ACCOUNTING_LOGGED_DATE_RANGE................................................................ 202
FISCAL_YEAR_START................................................................................................................... 202
FOOD_FACILITY_INSPECTION..................................................................................................... 203
FULL_PAY_ALLOCATION_OPTIONS............................................................................................ 204
GENDER..........................................................................................................................................204
GIS_ATTACHMENT_SELECTION.................................................................................................. 204
GIS_BUFFER_DISTANCE.............................................................................................................. 205
GIS_NEARBY_QUERY_LIMITATION............................................................................................. 205
GIS_PROX_ALERT_TRIGGERS.................................................................................................... 206
GLOBAL_SEARCH_BUILD_INDEX_ENTITIES.............................................................................. 206
GLOBAL_SEARCH_MAX_COUNT................................................................................................. 207
GLOBAL_TRUST_ACCOUNT......................................................................................................... 207
GRACE_PERIOD_INTERVAL_UNITS............................................................................................ 208
HEARING BODY............................................................................................................................. 208
HEARING LOCATION..................................................................................................................... 208
HEARING MAX TIME..................................................................................................................... 209
I18N_ADDRESS_FORMAT............................................................................................................. 209
I18N_SETTINGS............................................................................................................................. 212
INDIVIDUAL_CONTACT_MATCH_CRITERIA................................................................................ 214
INSPECTION_CATEGORY............................................................................................................. 215
INSPECTION_DISTRICT_ON_PARCEL.........................................................................................216
INSPECTION_RESULT_CSV_FORMAT........................................................................................ 216
INSPECTION_ROUTE_TYPE......................................................................................................... 217
INSPECTION_SETTING................................................................................................................. 218
INSPECTION_UNIT_NUMBER_VALUES....................................................................................... 219
INSPECTIONS_BY_UNIT............................................................................................................... 220
INSPECTOR_AUTO_ASSIGN_CRITERIA......................................................................................220
INSPECTOR_WORKLOAD_CALENDAR_TIME............................................................................. 221
KEEP_COMPLETED_INSPECTION_ACTIVE................................................................................ 221

| Contents | 11

LICENSE_TYPE.............................................................................................................................. 222
LICENSED_PROF_ACTIVE_STATUS............................................................................................ 222
LICENSED_PROF_EXPIRE_STATUS............................................................................................222
LICENSED PROFESSIONAL TYPE............................................................................................... 223
LIMIT_WORKSTATION_ACCEPT_PAYMENT............................................................................... 223
LOAD_TO_RECORD_PORTLET.................................................................................................... 223
LOGO_TYPE_CATEGORY............................................................................................................. 224
LONG_TERM_TIME_TRACKING....................................................................................................224
LOOKUP_TABLE_PAGE_SIZE.......................................................................................................225
MASKS............................................................................................................................................ 225
MASTER_SCRIPT_DEFAULT_VERSION...................................................................................... 227
MAX_ATTACHMENT_SELECTION_NUMBER...............................................................................227
MEETING BODY............................................................................................................................. 227
MEETING LOCATION..................................................................................................................... 228
MEETING MAX TIME..................................................................................................................... 228
MEETING_NOTIFICATION_OUTLOOK_REMINDER.....................................................................228
MEETING_REASON_COMMENT................................................................................................... 229
MEETING_TYPE_STATUS_GROUP.............................................................................................. 229
MEETING_TYPE_STATUS_{Group Name}....................................................................................230
MODULE_AUDIT_FREQUENCY.................................................................................................... 230
MULTIPLE_APO_GIS_SELECTION............................................................................................... 230
MULTIPLE_LICENSE_PROFESSIONAL........................................................................................ 231
MULTI_SERVICE_SETTINGS.........................................................................................................231
NEW_SPEAR_FORM_ENABLE......................................................................................................232
ONE_INVOICE_FOR_ALL_CAPS...................................................................................................232
ONLINE_PAYMENT_MAX_AMOUNT............................................................................................. 233
ONLINEPAYMENT_WEBSERVICE_URL....................................................................................... 233
ORGANIZATION_CONTACT_MATCH_CRITERIA.........................................................................234
PARCELSET_SCRIPT_LIST........................................................................................................... 235
PART_CALCULATE_TYPE............................................................................................................. 235
PARTIAL_CAP_CONDITION_ENABLE.......................................................................................... 235
PARTIALLY_COMPLETED_CAP_PURGE_DAYS......................................................................... 236
PARTS_ALLOW_NEGATIVE_QUANTITY...................................................................................... 236
PASSWORD_CALCULATION_SCORE.......................................................................................... 236
PASSWORD_POLICY_SETTINGS................................................................................................. 237
PAYMENT_CREDITCARD_TYPE...................................................................................................238
PAYMENT_CHECK_ACCOUNT_TYPE.......................................................................................... 238
PAYMENT_CHECK_TYPE..............................................................................................................238
PAYMENT_GROUP........................................................................................................................ 239

| Contents | 12

PAYMENT_PROCESSING_DEFAULT_METHOD..........................................................................239
PAYMENT_PROCESSING_METHOD............................................................................................ 240
PAYMENT_PROCESSING_RECORD_RECEIPT...........................................................................241
PAYMENT_RECEIVED_TYPE........................................................................................................ 241
PAYMENT_REMITTER_CONTACT_TYPE.....................................................................................241
PENALTY_FEE_FUNC....................................................................................................................242
PENALTY_INTERVAL_UNITS........................................................................................................ 242
PHONE_NUMBER_IDD...................................................................................................................242
PHONE_NUMBER_IDD_ENABLE.................................................................................................. 247
POINT_OF_SALE_FEE_SCHEDULE............................................................................................. 248
POINT_OF_SALE_TYPE................................................................................................................ 248
POPULATE_CURRENT_USER_TO_APPLICANT......................................................................... 249
PRIORITY........................................................................................................................................ 249
PRODUCTION_UNIT_TYPE........................................................................................................... 250
PROFESSIONALSET_SCRIPT_LIST............................................................................................. 250
PROX_ALERT_ACTION..................................................................................................................251
PROXIMITY ALERT DISPLAY GIS map viewer.............................................................................251
RACE............................................................................................................................................... 251
RANDOM_AUDIT............................................................................................................................ 252
REASON_FOR_RESCHEDULING_CANCELLING_EXAMINATION.............................................. 252
RECENTLY_HISTORY_SIZE.......................................................................................................... 252
REF_ADDRESS_TYPE................................................................................................................... 253
REFERENCE_CONTACT_RELATIONSHIP................................................................................... 253
REFUND_PAYMENT_REASON......................................................................................................254
REGIONAL MODIFIER....................................................................................................................254
RELATED_CAP_SUMMARY...........................................................................................................255
RELATED_RECORDS_DEFAULT_VIEW....................................................................................... 255
RELATED_CAP_CONFIG............................................................................................................... 255
REMOVE_PAY_FEE....................................................................................................................... 256
REMOVE_REQUIRED_IN_ADMIN_CONDITIONS.........................................................................256
REMOVE_REQUIRED_IN_DAILY_CONDITIONS.......................................................................... 258
REPORT_CRITERIA_LANGUAGE................................................................................................. 259
REPORTS FROM GIS OBJECTS.................................................................................................. 259
REPRINT_REASONS......................................................................................................................260
ROUTE_OPTIMIZER_PROVIDER.................................................................................................. 260
SALUTATION.................................................................................................................................. 260
SESSION_TIMEOUT....................................................................................................................... 261
SG-PERCENTAGE_ EXCLUDE_ INVOICED_ FEE.......................................................................261
SINGLE_INVOICE_REPORT.......................................................................................................... 262

| Contents | 13

SOCIAL_MEDIA_SETTINGS.......................................................................................................... 262
SPELL_CHECKER_ENABLED....................................................................................................... 262
STANDARD_WEB_FONTS............................................................................................................. 263
STATES........................................................................................................................................... 263
STATUS_OF_CONDITIONS_OF_APPROVAL............................................................................... 264
STREET DIRECTIONS................................................................................................................... 264
STREET SUFFIXES........................................................................................................................ 264
STRUCTURETYPE......................................................................................................................... 265
STRUCTURE_APO_ASSOCIATION...............................................................................................265
STRUCTURE_CAP_ASSOCIATION............................................................................................... 265
STRUCTURE_ESTABLISHMENT_APO_ASSOCIATION...............................................................266
STRUCTURE_ESTABLISHMENT_LAND_USE.............................................................................. 266
STRUCTURE_ESTABLISHMENT_STATUS...................................................................................267
TEMPLATE_EMSE_DROPDOWN.................................................................................................. 267
TEMPLATE_TEXT_PARAMS..........................................................................................................267
TIME_ACCOUNTING_SETTINGS.................................................................................................. 268
TIME_MODULES.............................................................................................................................268
TRUST_ACCOUNT_ADMINISTRATOR..........................................................................................268
TRUST_ACCOUNT_ONLY..............................................................................................................269
UNIT DESC..................................................................................................................................... 269
UNIT TYPES................................................................................................................................... 269
UPDATE_REFERENCE_CONDITION............................................................................................ 270
USER_DISCIPLINES.......................................................................................................................270
USER_DISTRICTS.......................................................................................................................... 271
VAL_CALC_BY_RECORD_TYPE................................................................................................... 271
VALUATION_CALCULATOR_VERSION........................................................................................ 272
VEHICLE..........................................................................................................................................272
VOID_INVOICE_REASON.............................................................................................................. 272
VOID_PAYMENT_REASON............................................................................................................273
WITHOUT_INSPECTION_TIME......................................................................................................273
WO_TASK_DURATION_UNIT........................................................................................................ 273
WO_TASK_DURATION_SAME_AS_DEFAULT............................................................................. 273
WO_CLOSE_CHECK_TASK...........................................................................................................274
WORKFLOW_FIDS......................................................................................................................... 274
WORKFLOW_CONFIGS................................................................................................................. 274

Function IDs Reference.............................................................................276
0004-Admin Users........................................................................................................................... 276
0005-Reference Property Parcels................................................................................................... 276
0006-Reference Property Addresses.............................................................................................. 277

| Contents | 14

0008-Reference Licensed Professionals.........................................................................................277
0025-Admin Workflow Email Settings............................................................................................. 278
0026-Admin Workflow Email Messages..........................................................................................278
0027-Workflow Email Override........................................................................................................279
0036-Admin Workflow Processes................................................................................................... 279
0043-Tickler..................................................................................................................................... 279
0044-User Preferences................................................................................................................... 279
0045-Admin Organizational Hierarchy............................................................................................ 280
0047-Admin Fee Payment Periods................................................................................................. 280
0048-Reference Hearing Locations.................................................................................................280
0049-Reference Hearing Bodies..................................................................................................... 281
0050-Reference Hearing Calendar (old)......................................................................................... 281
0054-Admin Condition Types.......................................................................................................... 281
0055-Admin Condition Status..........................................................................................................282
0056-Admin Condition Reference................................................................................................... 282
0057-Reference Condition Parcels................................................................................................. 282
0058-Admin Workflow Condition Validation.................................................................................... 283
0059-Admin Fees Valuation Calculation......................................................................................... 283
0060-Admin Fees Regional Modifier...............................................................................................283
0061-Admin SmartChoice Code......................................................................................................284
0063-Admin Workflow Task Status................................................................................................. 284
0065-Admin Application Types........................................................................................................284
0068-Admin Fee Item Sets............................................................................................................. 285
0069-Reference Condition Addresses............................................................................................ 285
0070-Reference Condition Licensed Professionals........................................................................ 286
0071-Admin Workflow Final Inspection...........................................................................................286
0072-Admin App Spec Info............................................................................................................. 286
0073-Admin Application Renewal Info............................................................................................ 286
0074-Admin License Fee Payment Period..................................................................................... 287
0075-Admin License Types.............................................................................................................287
0076-Accela Events.........................................................................................................................287
0077-Admin Event Setup................................................................................................................ 287
0078-Admin Event Script Setup......................................................................................................288
0079-Admin Event Script Test........................................................................................................ 288
0080-Admin Rbizdomain Maintenance........................................................................................... 288
0081-Admin Calendar Events......................................................................................................... 289
0082-Reference Structure............................................................................................................... 289
0083-Reference Structure Template............................................................................................... 289
0084-Reference People Contact..................................................................................................... 289

| Contents | 15

0085-Admin APO Template............................................................................................................ 290
0086-Admin Agency Online Help.................................................................................................... 290
0087-Accela Online Help.................................................................................................................290
0088-Admin People User Defined Attributes.................................................................................. 291
0089-Reference Property Owners...................................................................................................291
0092-Accela Functions.................................................................................................................... 292
0093-Accela Release Versions....................................................................................................... 292
0094-Accela Agency........................................................................................................................292
0095-Accela Agency Functions.......................................................................................................293
0096-Admin User Groups................................................................................................................293
0097-Admin Workflow Review Activity............................................................................................293
0098-Reference Standard Comments.............................................................................................294
0099-Admin Oracle Reports............................................................................................................294
0106-Admin Batch job..................................................................................................................... 294
0107-Admin GIS Service.................................................................................................................295
0108-Admin Document Type...........................................................................................................295
0109-Reference Genealogy Split/Merge......................................................................................... 296
0110-Reference Owner Condition...................................................................................................296
0111-Admin GIS Dynamic Themes.................................................................................................297
0112-Admin Workflow..................................................................................................................... 297
0115-Reference Calendar Structure............................................................................................... 297
0116-Admin Calendar Structure Blockout.......................................................................................298
0117-Admin Calendar Inspection Blockout..................................................................................... 298
0118-Admin GIS Search Tools....................................................................................................... 298
0119-Admin Citation Number Generator.........................................................................................299
0120-Accela Login Page Navigation Link Maintenance..................................................................299
0121-Admin Agency Announcements............................................................................................. 299
0122-Accela System Announcements............................................................................................ 299
0123-Admin Inspection Result Group............................................................................................. 300
0124-Admin Inspection Guide Sheet.............................................................................................. 300
0125-Admin Inspection Guide Sheet Group................................................................................... 300
0127-Admin Application Status Group............................................................................................ 301
0128-Accela User Profile Replace Password................................................................................. 301
0129-Admin GIS Feature................................................................................................................ 301
0130-Admin GIS Establish Genealogy............................................................................................302
0131-Admin Find App (Custom)..................................................................................................... 302
0133-Admin Inspection Type Sets.................................................................................................. 302
0134-Admin-Message-General........................................................................................................ 303
0135-Admin-Message-Supervisor....................................................................................................303

| Contents | 16

0136-Admin Application General Profile......................................................................................... 304
0137-Admin Filter View................................................................................................................... 304
0139-Admin-DataFilter/QuickQuery................................................................................................. 304
0142-Admin Agency Security Policies............................................................................................ 305
0143-Admin Workflow Task Spec Info............................................................................................305
0144-Admin Agency Dynamic Menu...............................................................................................306
0145-Admin Report Management................................................................................................... 306
0146-Admin Folder Admin...............................................................................................................306
0147-Accela DB Admin................................................................................................................... 307
0148-Admin Report Admin.............................................................................................................. 307
0149-Admin Universe Admin...........................................................................................................307
0150-Admin Workload and Skillset................................................................................................. 307
0151-Admin Alert and Rules........................................................................................................... 308
0152-Admin IntelliScript...................................................................................................................308
0153-Reference GIS Proximity Alerts............................................................................................. 308
0154-Reference Workflow Proximity Alerts.....................................................................................309
0155-Admin Label Configuration.....................................................................................................309
0156-Admin SmartChart Configuration........................................................................................... 309
0157-Admin SmartChart Query Configuration................................................................................ 310
0158-Admin Attribute Definition.......................................................................................................310
0159-Admin Attribute Template Definition...................................................................................... 311
0160-Admin AMS Asset Definition.................................................................................................. 311
0161-Admin Work Order Costing Item Definition............................................................................312
0162-Admin Work Order Parts Definition........................................................................................312
0163-Admin Work Order Tools Definition....................................................................................... 312
0164-Admin Links Portlets.............................................................................................................. 312
0169-Admin-Work Order Template................................................................................................. 313
0170-Admin-WO Template Costing................................................................................................ 313
0173-WO Template Part................................................................................................................. 314
0175-Admin App Spec Info Groups................................................................................................ 314
0179-Admin App Spec Info Subgroups.......................................................................................... 314
0180-Admin Workflow Task Spec Info Subgroups......................................................................... 315
0181-Admin Fees Manage Schedule..............................................................................................315
0182-Admin GIS Attribute Mapping................................................................................................ 315
0183-Reference Hearing Calendar................................................................................................. 316
0184-Admin Content Customization................................................................................................316
0185-Admin V360 Export................................................................................................................ 317
0186-Admin V360 Import................................................................................................................ 317
0187-Admin Upload Logo Image.................................................................................................... 317

| Contents | 17

0188-Admin Flow Diagram..............................................................................................................318
0190-Manage Trust Account........................................................................................................... 318
0191-Update license expiration task............................................................................................... 319
0192-Workflow Report Setting........................................................................................................ 319
0193-Report Management Auto Report.......................................................................................... 320
0194-Access Structure Conditions.................................................................................................. 320
0195-Admin-PM Schedule...............................................................................................................320
0196-Admin-PM Schedule Linked Quick Query............................................................................. 321
0197-Admin-PM Schedule Linked Asset.........................................................................................321
0198-Admin-PM Schedule Skipped Asset...................................................................................... 322
0199-Admin-PM Schedule Hold Event............................................................................................322
0200-Admin-PM Schedule Maintenance Record............................................................................ 323
0201-Admin-Generating Work Orders By PM Schedule.................................................................323
0202-Application Type Image..........................................................................................................323
0204-Properties Rename Parcel ID................................................................................................ 323
0205-Admin App Spec Info Table...................................................................................................324
0206-Admin Fee Decisions............................................................................................................. 324
0207-Admin Inspector Districts....................................................................................................... 324
0208-Reference Address Condition History....................................................................................325
0209-Reference Parcel Condition History.......................................................................................325
0210-Reference Owner Condition History...................................................................................... 326
0211-Reference Licensed Professional Cond. History................................................................... 326
0212-Reference Structure Condition History.................................................................................. 326
0213-Admin AMS Parts Item Location............................................................................................327
0214-Admin AMS Parts Vendors and Manufacturers..................................................................... 327
0218-Admin Auto-Assign Inspection............................................................................................... 327
0219-Admin AMS PM Schedule Location.......................................................................................328
0220-Admin AMS Address PM Schedule....................................................................................... 328
0221-Admin Console Management.................................................................................................329
0222-Address Asset........................................................................................................................ 329
0223-Address Work Order.............................................................................................................. 329
0224-Active Directory...................................................................................................................... 330
0226-Reports Manager Admin........................................................................................................ 330
0227-Condition Assessment............................................................................................................330
0229-Admin display Department..................................................................................................... 331
0230-Menu Navigation Admin......................................................................................................... 331
0231-Admin Inspection Type/Guide Sheet for ODS....................................................................... 332
0232-Admin display Option/Required column................................................................................. 332
0234-Workflow Calendar................................................................................................................. 332

| Contents | 18

0235-Inspection Default Value Policy............................................................................................. 333
0236-Inspection Type and Status Security..................................................................................... 333
0237-Attach GIS Object.................................................................................................................. 334
0239-Activities For People and Property........................................................................................ 334
0240-Reports Manager Admin........................................................................................................ 334
0241-Parcel Subdivision and Lot Search........................................................................................335
0242-Required for Fee Calculation................................................................................................. 335
0243-GIS Service............................................................................................................................ 336
0244-Fee Estimation....................................................................................................................... 336
0245-Long Term Time Tracking......................................................................................................336
0246-Activities Specific Information................................................................................................ 337
0247-Agency Workday Calendar.................................................................................................... 338
0248-Admin-Security Policy-EDMS Access Security...................................................................... 338
0249-Workflow Edit......................................................................................................................... 338
0250-People Info Table................................................................................................................... 339
0251-Hearing Reason..................................................................................................................... 339
0252-Asset Type Available CAP Type............................................................................................339
0253-Asset GIS Synchronize.......................................................................................................... 340
0254-WO Task Definition................................................................................................................ 340
0255-Manage Asset Type Security................................................................................................. 341
0256-Carrying over Failed Guide Sheet Items............................................................................... 341
0257-Admin Inspection Calendar.................................................................................................... 341
0258-Supervisor Inspection Calendaring........................................................................................ 342
0259-ASI Lookup Table...................................................................................................................342
0260-Expression Builder..................................................................................................................343
0261-ASI Form Layout Editor......................................................................................................... 343
0263- Admin Event Calendar (obsolete, replaced by 8483)........................................................... 343
0264-Admin Time Accounting Type................................................................................................ 344
0265-Admin Time Accounting User Profile..................................................................................... 344
0266-Admin Time Accounting Group.............................................................................................. 345
0267-TSI Form Layout Editor..........................................................................................................345
0268-APO Form Layout Editor........................................................................................................345
0269-Admin Attribute Form Layout Editor.......................................................................................346
0270-Sequence Generator.............................................................................................................. 346
0272-Control Shared Drop Down List in Admin..............................................................................347
0273-ASI Table Drill Down..............................................................................................................347
0274-Rating Type............................................................................................................................ 347
0275-Condition by Group................................................................................................................ 348
0276-Address Type Group.............................................................................................................. 348

| Contents | 19

0277-Address Type for the reference address............................................................................... 349
0278-Associate People....................................................................................................................349
0279-Associate Address..................................................................................................................350
0280-Associate Parcel.....................................................................................................................350
0281-Supervisor Master Calendaring..............................................................................................350
0282-Expression Migration.............................................................................................................. 351
0283-Associated CAP List...............................................................................................................351
0284-Batch Job Maintenance..........................................................................................................351
0285-Batch Job Schedule............................................................................................................... 352
0286-Delegate User Management.................................................................................................. 352
0288-Enable Inspection Flow.......................................................................................................... 354
0289-Enable Inspection Milestone.................................................................................................. 354
0290-Admin - Standard Comments.................................................................................................355
0291-Guide Sheet Template Data.................................................................................................. 355
0292-Service Management..............................................................................................................356
0294-Structure and Establishment.................................................................................................. 356
0295-Reference Structure and Establishment................................................................................ 356
0296-Structure and Establishment Condition..................................................................................357
0297-Structure and Establishment History......................................................................................357
0299-Super License Management.................................................................................................. 358
0300-License Management............................................................................................................. 358
0305-Admin Attribute Table Definition............................................................................................ 358
0306-Work Order Type....................................................................................................................359
0307-Audit Logger Definition...........................................................................................................359
0308-Data Manager Export............................................................................................................. 360
0309-Data Manager Import............................................................................................................. 360
0310-Admin Education Info............................................................................................................. 361
0311-Admin Continuing Education Info...........................................................................................361
0312-Admin Examination Info......................................................................................................... 361
0314-Admin Meeting Calendar........................................................................................................362
0315-Admin Create New Objects................................................................................................... 362
0316-Reference Contact Condition................................................................................................. 363
0317-Reference Contact Condition History.....................................................................................363
0318-Administration......................................................................................................................... 364
0319-Delete ASI and ASIT on existing CAPs.................................................................................364
0320-Admin License Verification.....................................................................................................364
0321-Reference Address Copy....................................................................................................... 365
0322-Reference Merge Contacts.................................................................................................... 365
0323-Disable Licensed Professionals Search.................................................................................366

| Contents | 20

0324-Admin Receipt Print Audit...................................................................................................... 366
0326-Define Asset Usage Unit Type.............................................................................................. 366
0327-Edit My QuickQuery By Administration..................................................................................367
0328-Accessibility Mode.................................................................................................................. 367
0330-Admin Work Order Costing Group Definition.........................................................................367
0331-Trust Account Associated Record..........................................................................................368
0332-Daily Cost Rate Definition...................................................................................................... 368
0333-Condition List Audit Log.........................................................................................................369
0334-Condition Detail Audit Log..................................................................................................... 369
0335-Copy or Move Parcel Associated Records............................................................................ 370
0336-User Calendar........................................................................................................................ 370
0337-Agency Holiday Calendar.......................................................................................................371
0338-Licensed Professional Document List....................................................................................371
0339-Inspection Grade Group.........................................................................................................371
0340-Reference Contact Type Security.......................................................................................... 372
0341-Daily Contact Type Security...................................................................................................372
0342-Parcels GIS Attributes Mapping.............................................................................................372
0343-Contact Relationship.............................................................................................................. 373
0344-Show Address on the Contact............................................................................................... 373
0345-Look Up Address on the Contact Address............................................................................ 373
0346-Workflow Designer................................................................................................................. 374
0347-Social Media........................................................................................................................... 374
0348-AA-AGIS Integration Diagnosis Tool......................................................................................375
0349-Contact Management............................................................................................................. 375
0350-Regional Settings................................................................................................................... 375
0351-Admin Set Type..................................................................................................................... 376
0352-Professional List..................................................................................................................... 376
0353-Contact Identity Fields............................................................................................................376
0354-Custom Dictionary.................................................................................................................. 377
0355-Reference Contact Relationship............................................................................................ 377
0357-Reference Contact Log.......................................................................................................... 377
0360-Account Settings.................................................................................................................... 378
0361-General Settings.....................................................................................................................378
0362-Duplicate Contact Address Check......................................................................................... 378
0365-License Certification Info........................................................................................................379
0366-License Certification Supervisor.............................................................................................379
0367-Default Clone Options............................................................................................................ 379
0368 - Reference Contact Document List...................................................................................... 380
0371-Professional List..................................................................................................................... 380

| Contents | 21

7800-Report Menu...........................................................................................................................380
7801-Ad Hoc Reports......................................................................................................................381
8006-Application Print Permit..........................................................................................................381
8014-Standard Comments and Task List....................................................................................... 381
8020-Condition Full Privileges.........................................................................................................381
8027-Smart Notice...........................................................................................................................382
8028-Addresses............................................................................................................................... 382
8029-Parcels.................................................................................................................................... 383
8030-Owners................................................................................................................................... 383
8031-Contacts..................................................................................................................................383
8032-Licensed Professionals...........................................................................................................384
8033-Additional Information.............................................................................................................384
8034-New Application......................................................................................................................385
8035-Find App................................................................................................................................. 385
8036-Workflow - 2.5........................................................................................................................ 386
8038-Valuation Calculation..............................................................................................................386
8039-PermitsPlus Historical Data....................................................................................................386
8047-Hearings (obsolete, replaced by 8483)..................................................................................386
8049-Batch Job (old)....................................................................................................................... 387
8068-Find App (simple search).......................................................................................................387
8073-App Spec Info........................................................................................................................ 387
8074-Set Header Maintenance....................................................................................................... 388
8075-Set Detail Maintenance.......................................................................................................... 388
8078-New Business License Application........................................................................................ 389
8079-Business Licenses Expiration Info......................................................................................... 389
8081-Project Maintenance/Navigation.............................................................................................389
8085-Inspection Email Notification.................................................................................................. 390
8090-Workflow Supervisor...............................................................................................................390
8093-Staff Search............................................................................................................................391
8097-Manual Application Number Option....................................................................................... 391
8098-Agency Switch........................................................................................................................ 391
8099-Inspection Calendar Override Authority................................................................................. 392
8102-People User Defined Attributes..............................................................................................392
8103-Structure Tracking.................................................................................................................. 392
8104-Assess Fees........................................................................................................................... 393
8105-User Defined Parcel Attribute................................................................................................ 393
8106-Void Application......................................................................................................................393
8107-Cashier-Supervisor................................................................................................................. 393
8108-Cashier Payment.................................................................................................................... 394

| Contents | 22

8110-Application Comment............................................................................................................. 395
8112-Application Cloning.................................................................................................................395
8113-Standard Comments...............................................................................................................395
8114-ADS New Non-Electronic Documents (old)........................................................................... 396
8115-ADS Document List (old)....................................................................................................... 396
8116-V360 Reports......................................................................................................................... 396
8119-GIS Service............................................................................................................................ 396
8120-ADS Non-Electronic Documents (old)....................................................................................397
8121-Set Payment........................................................................................................................... 397
8122-Batch Job............................................................................................................................... 397
8130-Parcel Genealogy................................................................................................................... 398
8132-Workflow................................................................................................................................. 398
8133-Workflow Task Assignments.................................................................................................. 399
8134-Set Workflow Status Change................................................................................................. 399
8135-Include Insp. History in Workflow History.............................................................................. 400
8137-Calendar Structure................................................................................................................. 400
8138-Condition Limit Access by Dept.............................................................................................400
8140-Limit Assignments by Dept.................................................................................................... 401
8141-Application Status...................................................................................................................401
8142-Application Status History...................................................................................................... 401
8143-Inspection Scheduling............................................................................................................ 402
8144-Inspection Results Supervisor................................................................................................402
8145-Inspection Results.................................................................................................................. 403
8146-Inspection Route Sheet..........................................................................................................404
8147-Inspection Assignments..........................................................................................................404
8148-Create From GIS....................................................................................................................404
8149-Inspection Guide Sheet..........................................................................................................405
8150-Find App (Custom)................................................................................................................. 405
8151-Messages............................................................................................................................... 406
8152-WO/SR Group Update........................................................................................................... 406
8153-ADS Document Upload (old)..................................................................................................406
8154-Application Hierarchy..............................................................................................................406
8155-Department Manager..............................................................................................................407
8157-Application Custom Header................................................................................................... 407
8161-Properties Section Township Range......................................................................................407
8162-Application Limit Access by App Type...................................................................................407
8163-Real Estate Work Request.................................................................................................... 407
8164-Real Estate Certification Package......................................................................................... 407
8165-Real Estate Relocation Displace............................................................................................408

| Contents | 23

8166-Real Estate Tract-Component Relationship...........................................................................408
8167-ADS Document Delete (old)...................................................................................................408
8168-Agency Dynamic Menu.......................................................................................................... 408
8169-Real Estate Service Request................................................................................................. 408
8170-Real Estate Vendor Work Order............................................................................................ 408
8171-Real Estate Tract-NFI Relationship....................................................................................... 408
8172-Real Estate Department Financials....................................................................................... 408
8173-Real Estate Project Financials............................................................................................... 409
8174-Real Estate Component Financials........................................................................................409
8175-GIS Objects............................................................................................................................ 409
8176-GIS Area Usage..................................................................................................................... 409
8177-Report Management...............................................................................................................410
8178-Report Runner........................................................................................................................ 410
8179-Report Scheduler................................................................................................................... 410
8180-Report Writer.......................................................................................................................... 410
8181-Report Object Writer.............................................................................................................. 410
8182-GIS Proximity Alerts............................................................................................................... 410
8183-Application App Spec Info Groups.........................................................................................411
8184-Set App Spec Info..................................................................................................................411
8185-Set Task Spec Info................................................................................................................ 411
8186-Workflow Task Activation....................................................................................................... 412
8187-Inspection GIS Route Optimization........................................................................................412
8188-SmartChart Display................................................................................................................ 412
8189-Asset Data Management........................................................................................................413
8190-Work Order Management.......................................................................................................414
8191-Work Order Costing............................................................................................................... 414
8192-Work Order Parts................................................................................................................... 414
8193-Work Order Tools...................................................................................................................415
8194-Work Order Scheduled Work Orders.....................................................................................415
8195-SmartChart Viewer................................................................................................................. 415
8196-SmartChart GIS...................................................................................................................... 415
8197-Real Estate FDA Exceptions..................................................................................................415
8198-Tract Financials Summary..................................................................................................... 415
8201-Daily Asset Location...............................................................................................................416
8202-Daily Asset Relationship........................................................................................................ 416
8203-Daily Record Asset.................................................................................................................416
8206-Daily-Work Order Close......................................................................................................... 416
8207-Workflow Ad Hoc Tasks - 5.2................................................................................................ 417
8208-Autopopulate APO Data from GIS......................................................................................... 417

| Contents | 24

8209-Single Portlet Data Summary.................................................................................................418
8210-Workflow My Task List...........................................................................................................418
8211-List Driven SmartChart...........................................................................................................418
8212-Upload EDMS Attachment..................................................................................................... 419
8213-Download EDMS Attachment.................................................................................................419
8214-View EDMS Attachment List.................................................................................................. 420
8215-GIS Genealogy....................................................................................................................... 420
8216-Citizen Fee Update................................................................................................................ 421
8217-Fees Credit Card Payment.................................................................................................... 421
8218-Citizen User Profile Join Organization................................................................................... 421
8219-Citizen User Profile................................................................................................................ 421
8220-Citizen User Profile Agency Spec Info...................................................................................421
8221-Citizen User Profile Organization...........................................................................................421
8222-Citizen User Profile Organization Supervisor.........................................................................422
8223-Citizen Admin......................................................................................................................... 422
8224-Citizen Admin Supervisor.......................................................................................................423
8227-PermitsPlus Search Address................................................................................................. 423
8228-Reports Link........................................................................................................................... 424
8229-Hearings (obsolete, replaced by 8483)..................................................................................424
8230-Search Applicant.................................................................................................................... 425
8231-Set Current User.................................................................................................................... 425
8232-Get Parcel And Owner...........................................................................................................425
8233-Search Parcel......................................................................................................................... 425
8234-Get Address And Owner........................................................................................................425
8235-Search Owner........................................................................................................................ 426
8236-Related CAPs-Search............................................................................................................ 426
8238-Payment History..................................................................................................................... 426
8240-Delete EDMS Attachment...................................................................................................... 426
8241-Inspection New Inspection..................................................................................................... 427
8242-Workflow Calculate Percent Complete.................................................................................. 427
8243-Daily Flow Diagram................................................................................................................ 427
8244-Daily-Print Single CAP Detail.................................................................................................428
8249-Turn Off the Inspection Tab in CAP List............................................................................... 428
8250-Search My Tasks................................................................................................................... 428
8251-Cashier Session..................................................................................................................... 428
8253-Showing GIS X/Y Locator...................................................................................................... 429
8255-Update Inspection Required/Optional Property......................................................................429
8259-Cashier Session Supervisor...................................................................................................429
8260-Change Due........................................................................................................................... 430

| Contents | 25

8261-Open Cash Drawer................................................................................................................ 430
8262-Daily-Asset PM Schedule List................................................................................................430
8264-Create from Model................................................................................................................. 431
8265-Model Maintenance................................................................................................................ 431
8266-Check reference object condition...........................................................................................431
8267-Enable Payment by Trust Account........................................................................................ 432
8268-Display Option/Required of the Inspection............................................................................ 432
8269-Customize Content................................................................................................................. 432
8270-App Spec Info Table.............................................................................................................. 433
8271-Fees Recalculate Fees.......................................................................................................... 433
8272-Application Condition History................................................................................................. 433
8273-Parts Inventory....................................................................................................................... 434
8274-Part Transaction-Issue........................................................................................................... 434
8275-Parts Supply........................................................................................................................... 435
8276-Parts Contact..........................................................................................................................435
8277-Asset Usage Tracking............................................................................................................ 435
8278-PM Schedule Log...................................................................................................................436
8279-New Mechanism to Create Work Order.................................................................................436
8280-Linking Work Order to PM Schedule..................................................................................... 436
8281-Inspector Districting................................................................................................................ 437
8282-Asset Condition...................................................................................................................... 437
8285-Show Cashier ID on Payment............................................................................................... 438
8286-Fees Print Receipt Summary................................................................................................. 438
8287-Auto-Assign Inspection...........................................................................................................439
8288-Fees Point Of Sale.................................................................................................................439
8289-Fees Point Of Sale Refunds.................................................................................................. 440
8290-Calculate Asset Depreciation................................................................................................. 440
8291-Jetspeed Console Customization...........................................................................................441
8292-Create Multiple Related CAPs............................................................................................... 441
8293-Open New Related CAP in SPEAR.......................................................................................441
8294-Asset Document Look up.......................................................................................................442
8295-Real Estate Land Acquisition Summary................................................................................ 442
8296-Cash Drawer.......................................................................................................................... 442
8298-LocationQuery........................................................................................................................ 442
8299-Daily-ODS Inspection Gaps................................................................................................... 442
8300-Inspections by Unit Number...................................................................................................443
8301-Using Credit Card For Payment............................................................................................ 443
8302-Using Check For Payment..................................................................................................... 444
8303-Synchronize Function in APO................................................................................................ 444

| Contents | 26

8304-Search Credit Card/Check Transaction................................................................................. 444
8305-Reports Portlet....................................................................................................................... 445
8307-Reports Menu......................................................................................................................... 445
8308-Asset Condition Assessment Management........................................................................... 445
8309-Asset Condition Assessment Observation............................................................................. 446
8310-Asset Condition Assessment Linked Work Order..................................................................446
8312-Asset Clone............................................................................................................................ 446
8313-Fee Item Note........................................................................................................................ 447
8314-Adjusted column..................................................................................................................... 447
8315-Copy Inspection and Guide Sheet......................................................................................... 447
8317-Workflow Calendar................................................................................................................. 448
8318-Adhoc and Workflow Together...............................................................................................448
8322-Attach GIS Object.................................................................................................................. 449
8323-Update Related Caps.............................................................................................................449
8324-Create CAP-Validate.............................................................................................................. 449
8325-Save Work in Progress of CAP............................................................................................. 450
8326-Fee Estimate.......................................................................................................................... 450
8327-Search Select Parcel Function...............................................................................................450
8329-App Spec Info Supervisor...................................................................................................... 451
8330-People Info Table................................................................................................................... 451
8331-Create WO From Asset List...................................................................................................452
8332-Evidence................................................................................................................................. 452
8333-Void Invoiced But Unpaid Fee............................................................................................... 452
8334-Evidence Supervisor...............................................................................................................453
8335-Application Status Security.................................................................................................... 453
8336-Recalculate Production Units................................................................................................. 453
8337-Production History.................................................................................................................. 454
8338-WO Task tab on Work Order.................................................................................................454
8339-Maintenance WO Task on Work Order................................................................................. 454
8340-Application Comments Edit.................................................................................................... 455
8341-Auto Pay.................................................................................................................................455
8342-Auto Create Trust Account.................................................................................................... 455
8343-Copy Guide Sheet..................................................................................................................456
8344-Carrying Over Failed Guide Sheet Items...............................................................................456
8345-User Inspection Calendar.......................................................................................................457
8346-Parent Asset Dependency Flag............................................................................................. 457
8347- User Event Calendar............................................................................................................ 457
8348-Void Paid Fee........................................................................................................................ 458
8349-Parcel Set Detail.................................................................................................................... 458

| Contents | 27

8350-Edit Parcel Set Members....................................................................................................... 458
8351-Parcel Set Create CAPs........................................................................................................ 459
8352-Parcel Set Create Conditions.................................................................................................459
8353-Parcel Set Create Owners..................................................................................................... 459
8355-Parcel Set Execute Script...................................................................................................... 460
8356-Set Cloning.............................................................................................................................460
8357-Set Conditions........................................................................................................................ 461
8358-Set Comments........................................................................................................................461
8359-Set Scripts.............................................................................................................................. 461
8361-Set Licensed Professionals....................................................................................................462
8362-Set Owners.............................................................................................................................462
8363-Set Contacts........................................................................................................................... 462
8364-Set Status Change................................................................................................................. 463
8365- Inheritable editable................................................................................................................463
8366-Void Payment......................................................................................................................... 463
8367-Manage Batch Invoice............................................................................................................464
8369-User Time Accounting Daily...................................................................................................464
8370-Set of Sets Detail................................................................................................................... 464
8371-Set of Sets Members............................................................................................................. 465
8372-Set Analysis............................................................................................................................465
8373-Fee Analysis........................................................................................................................... 466
8374-Set of Sets Payment.............................................................................................................. 466
8375-Time Accounting Administrator.............................................................................................. 466
8376-Time Accounting Supervisor.................................................................................................. 467
8377-Select From Multiple Inspection Groups................................................................................467
8378-Address Set Detail................................................................................................................. 468
8379-Address Set Members............................................................................................................468
8380-Address Set Comments......................................................................................................... 468
8381-Address Set Condition........................................................................................................... 469
8382-Address Set Execute Script................................................................................................... 469
8383-Licensed Professional Set Detail........................................................................................... 469
8384-Licensed Professional Set Members..................................................................................... 470
8385-Licensed Professional Set Comments................................................................................... 470
8386-Licensed Professional Set Condition..................................................................................... 470
8387-Licensed Professional Set Execute Script............................................................................. 471
8388-Reference Address Comments.............................................................................................. 471
8389-Reference Licensed Professional Comments........................................................................ 471
8390-CAP Type picker with Tree....................................................................................................472
8391-Create Multiple CAPs for Parcels.......................................................................................... 472

| Contents | 28

8393-Payment Processing...............................................................................................................473
8394-Payment History..................................................................................................................... 473
8395-CAP Summary........................................................................................................................473
8397-ASI Table Delete.................................................................................................................... 474
8398-Cap Renewal.......................................................................................................................... 474
8399-Asset Rating........................................................................................................................... 474
8400-Manage Inspection................................................................................................................. 475
8401-GIS Address Locator..............................................................................................................475
8402-Asset Associated Part............................................................................................................ 476
8403-Multi Agency Switch............................................................................................................... 476
8404-Void Payment......................................................................................................................... 478
8405-Structure and Establishment.................................................................................................. 478
8406-Edit Valuation Calculator Unit Cost........................................................................................478
8408-Edit Application Status History...............................................................................................479
8409-Workflow Delete and Assign.................................................................................................. 479
8410-Delete CAPs........................................................................................................................... 479
8411-Cap Summary........................................................................................................................ 481
8412-Asset Group Update...............................................................................................................481
8413-MyTask - Inspections............................................................................................................. 481
8414-Void Payment......................................................................................................................... 482
8415-Refund Payment.....................................................................................................................482
8416-Invoices Management............................................................................................................ 483
8417-Enable POS............................................................................................................................483
8418-Work Order Cost Distribution................................................................................................. 483
8419-Delete Workflow History.........................................................................................................484
8420-Daily Education Info............................................................................................................... 484
8421-Daily Delete Required Education........................................................................................... 485
8422-Random Audit History............................................................................................................ 485
8423-Random audit set................................................................................................................... 485
8424-Re-generate/Delete Random Audit Set................................................................................. 486
8425-Execute Script........................................................................................................................ 486
8426-Random Audit Supervisor...................................................................................................... 486
8427-Claim or Release Task Assignment.......................................................................................487
8428-Daily Continuing Education Info.............................................................................................487
8429-Daily Delete Required Continuing Education.........................................................................488
8430-Daily Examination Info........................................................................................................... 488
8431-Daily Delete Required Examination....................................................................................... 489
8432-User Meeting Calendar.......................................................................................................... 489
8433-Document Permission Settings.............................................................................................. 489

| Contents | 29

8434-Global Search.........................................................................................................................490
8435-Daily - Cashier - Pay More.................................................................................................... 490
8436-Daily - Cashier - Apply...........................................................................................................490
8437-Daily - Cashier - Refund........................................................................................................ 491
8438-Daily - Cashier - Void............................................................................................................ 491
8439-Daily - Cashier - Generate Receipt....................................................................................... 491
8440-Daily - Cashier - Fund Transfer............................................................................................. 492
8441-Initiated Product Info.............................................................................................................. 492
8442-Inspection History Audit Log.................................................................................................. 493
8443-Application Audit Log............................................................................................................. 493
8444-Application Status History Log............................................................................................... 493
8445-Daily - Cashier - Pay More.................................................................................................... 494
8446-Disable Licensed Professionals Delete..................................................................................494
8447-Part Transaction-Receive....................................................................................................... 494
8448-Part Transaction-Transfer.......................................................................................................495
8449-Part Transaction-Adjust.......................................................................................................... 495
8450-Part Transaction-Reserve.......................................................................................................495
8451-Part Transaction-Void.............................................................................................................496
8456-Fee Schedule Drop Down List...............................................................................................496
8457-Create Free Form Condition.................................................................................................. 497
8458-Complete Record and ASI Audit............................................................................................497
8459-Specific Record and ASI Audit Log....................................................................................... 497
8460-Delete Related Records......................................................................................................... 498
8461-Show Work Order Cost Information.......................................................................................498
8462-Time Accounting on inspections............................................................................................ 499
8463-Payment Auto Allocation........................................................................................................ 499
8464-SSN and FEIN Mask..............................................................................................................500
8465-Deposit Trust Account During the payment...........................................................................500
8466-Daily Work Order Costing Group Definition........................................................................... 501
8467-Schedule Related Inspections................................................................................................501
8468-Inspections List Guide Sheet Audit Log.................................................................................501
8469-Inspections Detail Guide Sheet Audit Log............................................................................. 502
8470-Time Accounting on Workflow............................................................................................... 502
8471-Document Audit Log...............................................................................................................503
8472-Disable ADS Document View Button.....................................................................................503
8473-EDMS Document URL Link................................................................................................... 504
8474-Check-in Permission...............................................................................................................504
8475-Asset Audit Log...................................................................................................................... 504
8476-Examination Audit Log........................................................................................................... 505

| Contents | 30

8477-Document Review Permission............................................................................................... 505
8478-Document Assign Permission................................................................................................ 505
8479-Deactivate Contacts in Set Contacts..................................................................................... 506
8480-Conditions of Approval........................................................................................................... 506
8481-Delete Conditions of Approval............................................................................................... 506
8482-Create a Set in Record List................................................................................................... 507
8483 Meetings................................................................................................................................. 507
8484-Cost Item Permission............................................................................................................. 507
8485-Daily Record Set List............................................................................................................. 508
8486-Compare Documents..............................................................................................................508
8490-Record Contact Log............................................................................................................... 509
8491-Workflow History Log............................................................................................................. 509
8492-Communication List................................................................................................................ 509
8493-Consolidated Record Activities.............................................................................................. 510
8494-Record Communication List................................................................................................... 510
8495-Show Inspection Submitted Location.....................................................................................510
8496-Optimize Inspection Route..................................................................................................... 511
8497-Result Inspections by CSV.................................................................................................... 511
8499-New Document from Scan..................................................................................................... 511
8500-Asset Condition Assessment Costing.................................................................................... 512
8501-Display Desired Date Field.................................................................................................... 512
8502-Pending Inspection................................................................................................................. 512
8503 - Attach Record Document to People....................................................................................513
8504 - Document Checklist.............................................................................................................513
8505 - Document Review Comments............................................................................................. 513
8506 - Internal User........................................................................................................................ 514
9999-Log Out...................................................................................................................................514

| Introduction | 31

Introduction
Related Links
Understanding Function Identifications
Understanding Standard Choices

Understanding Function Identifications
Civic Platform uses Function Identifications (FIDs) settings to determine access to Civic Platform functions.
You can set FIDs at the agency, modules, and user group levels.
FID settings for a module apply to all users with access to the module. FID settings for a user group further
refine the module FID settings by applying to all user group members within the module. A single user can
belong to only one user group for each module.
Civic Platform exposes more than 500 FIDs to solution modules and to user groups, and 34 FIDs (11 of
which are unique) to SuperAgency module user groups.
Civic Platform provides a single UI page for configuring the FIDs (Figure 1: Setting FIDs).

Figure 1: Setting FIDs
Civic Platform organizes the FIDs in a hierarchy as follows:
Function Group

The main level of FID categorization that consists of four headings:
•

Agency. Comprised of a single FID for configuring Accela events.

•

Admin. Addresses functionality associated with the Admin tab in the Civic Platform
‘Classic’ interfaces. Consists of features typically associated with administrators.

•

Daily. Addresses functionality associated with the Daily tab in the Civic Platform
‘Classic’ interfaces. Consists of features typically associated with users.

•

Reference. Primarily addresses Address, Parcel, Owner (APO) functionality.

Function Type

A FID type categorization within each of the three main function groups (Admin, Daily,
Reference)

Function Subtype

A FID subtype categorization within each function type

Function Category

A FID category within each function subtype

Function Name

The name of the FID

You configure each FID by setting it for no access, full access, or read access as follows:

| Introduction | 32

No Access

Deactivates the feature entirely for the selected user group. The user group cannot see
this feature.

Full Access

Grants the selected user group permission to perform all actions associated with the
feature.

Read Only

Allows the selected user group to view and to search information associated with the
feature.

Function IDs Reference provides reference information about all FIDs in numeric ascending order.

Understanding Standard Choices
Civic Platform uses Standard Choices to configure system switches, define values in a shared drop-down
list, or configure EMSE Master Scripts.
Standard Choices comprise a Standard Choice name, such as CONTACT_TYPE, along with Standard
Choice Values and Value Descriptions. You specify Standard Choice Values and Value Descriptions to
configure the operations associated with the named Standard Choice.
Civic Platform provides many different Standard Choices that you can invoke and configure to produce
the desired effect. Standard Choices Reference documents the most common Standard Choices. You can
define your own Standard Choices for shared drop-down lists and EMSE scripts.

| Working With FIDs and Standard Choices | 33

Working With FIDs and Standard Choices
Related Links
Working with FIDs
Working with Standard Choices

Working with Standard Choices
Civic Platform Vantage360 is gradually taking over the Standard Choice management which is previously
solely available in the legacy Classic administration portlet. You can maintain a few contact Standard
Choices in the Vantage360 setup administration portlet, and maintain all the other Standard Choices in the
Classic administration portlet.
This section includes instructions on how to maintain the Standard Choices. Standard Choices Reference
includes some of the common Standard Choices required for certain functions to work properly.
Topics
•

Editing Standard Choices in the Setup Admin

•

Managing Standard Choices in the Classic Admin

Editing Standard Choices in the Setup Admin
Make sure to always edit the following contact Standard Choices in the Standard Choices portlet in the
Setup Admin instead of the Classic Admin. Although you can access these Standard Choices from the
Classic Admin portlet, Civic Platform does not update the configuration functions available in the Classic
Admin to the latest as provided in the Setup Admin.
•

CONTACT TYPE

•

AUTO_SYNC_PEOPLE

•

INDIVIDUAL_CONTACT_MATCH_CRITERIA

•

ORGANIZATION_CONTACT_MATCH_CRITERIA

For the other Standard Choices, please still go to the Classic Admin (see Managing Standard Choices in
the Classic Admin).
To edit Standard Choices in the Setup Admin
1. Log in to Civic Platform.
Civic Platform displays your personalized Home page.
2. Click the main link configured for Civic Platform administration.
Civic Platform displays the Setup administration portlet.
3. Click Agency Profile > Standard Choices.
Civic Platform displays the Standard Choices portlet with the list of Standard Choices.

| Working With FIDs and Standard Choices | 34

4. Click a Standard Choice in the navigation tree to edit the Standard Choice. For example, the CONTACT
TYPE Standard Choice.
The Standard Choice edit page displays on the right side.

5. Update the Standard Choice fields as necessary. For the description of the common fields, see
Standard Choices Fields. For the fields specific to the Standard Choice, check the detailed description
of the Standard Choice in Standard Choices Reference.
6. If desired, click New to add a Standard Choice Value.
7. If desired, mark the check box besides a Standard Choice Value, and click Delete to delete the
Standard Choice Value.
8. Click Submit to save the change.

Managing Standard Choices in the Classic Admin
Topics
•

Searching for an Existing Standard Choice

•

Creating a Standard Choice

•

Editing Standard Choices

•

Deleting Standard Choices

| Working With FIDs and Standard Choices | 35

Searching for an Existing Standard Choice
To add another item or to remove an item from a list of choices in Civic Platform, you need to locate the
existing Standard Choice that controls the list. To find a Standard Choice, you must know the name or part
of the name of the Standard Choice item.
To search for an existing Standard Choice
1. Select Admin Tools > Agency Profile > Standard Choices.
Civic Platform displays the Standard Choices Search page.

2. In theStandard Choices Item Name field, enter the Standard Choice name or part of the name.
3. Click Submit.
Civic Platform displays a list of Standard Choices that match your search criteria on the Standard
Choices Browse page.

4. Click the red dot beside the Standard Choice item that you want.

Creating a Standard Choice
You can create a new Standard Choice. The initial installation of Civic Platform includes the Standard
Choices that Civic Platform requires to function properly. You can add a new list of choices or a new
system setting to a Standard Choice item.
For example, if your agency purchases GIS, you can set up GIS object set reports as Standard Choices.
For an illustration of this example, see Organizations and Users.
To create a Standard Choice

| Working With FIDs and Standard Choices | 36

1. Select Admin Tools > Agency Profile > Standard Choices.
Civic Platform displays the Standard Choices—Search page.

2. Click Add.
Civic Platform displays the Standard Choices—Add page.

3. Update these fields as described in Standard Choices Fields.
4. Click Submit.
Civic Platform displays the Standard Choices Item—Edit page.

5. Click Add.
Civic Platform displays the Add Standard Choices Value page.

| Working With FIDs and Standard Choices | 37

6. Specify the fields as described in Standard Choices Fields.
7. Click Submit.
Civic Platform returns to the Standard Choices Item—Edit page, which displays the new Standard
Choice value.
8. Add other Standard Choice values as necessary.
9. When you have added all of the choices in your Standard Choices item, click Update.

Editing Standard Choices
You can update or change Standard Choices. For example, if your local government enacts a new law or a
new ordinance regarding professional licenses, you can add a new status to the list of license statuses.
For some special Standard Choice, such as LICENSED PROFESSIONAL TYPE, you can associate
an application-specific information (ASI) groups to each Value item. This is useful when, for example,
some special professional fields require extra information. The extra fields can be pre-defined in the ASI
group, which you associated with the licensed professional type. When agency users create a license
record of that licensed professional type, the extra fields from the associated ASI group display during the
license creation process. To learn how to create an ASI group, see the “Working with Application Specific
Information” chapter in the Civic Platform Administrator Guide.
To edit Standard Choices
1. Find the Standard Choice that you want to work with. For instructions, see Searching for an Existing
Standard Choice.
Civic Platform displays the Standard Choices Item—Edit page.

2. Update the necessary fields as described in Standard Choices Fields.
•

If required, click Delete to remove a Standard Choice value line item.

•

For some special Standard Choices, such as LICENSED PROFESSIONAL TYPE, you can
associate an ASI group to each of its Value items. See Step 3 for detailed information.
To learn how to create an ASI group, see the “Working with Application Specific Information” chapter
in the Civic Platform Administrator Guide.

3. For some special Standard Choices, such as LICENSED PROFESSIONAL TYPE, there is an
Associated Template link in each of its Value lines. You can click it to associate an ASI group with the
Value item or disassociate an ASI group from the Value item. To do this, follow the sub step below:

| Working With FIDs and Standard Choices | 38

a. Click the Associated Template link in each value line item.
Civic Platform displays the Associated Template window.

b. Click the Application Specific Info Group Code drop-down list, and do one of the following:
•

Select a desired ASI group if you want to associate the ASI group with the value item.

•

Select the “---Select---” if you want to disassociate the associated ASI group from the value item.

c. Click Save.
4. Click Update.
Civic Platform saves your changes.
Table 1: Standard Choices Fields
Active

Mark the check box to include this item on the list of Standard Choices. Clear the check
box to remove this item from the Standard Choices.

Description

Enter a description that explains this Standard Choice item.

Standard Choices Item
Name

The name of the Standard Choice. For many Standard Choices, you must enter a
name exactly as instructed. For others, you can enter an intuitive descriptive name.

Standard Choices Value Enter the value that users see as an option in the drop-down list.
Status

Select the Enable option to make this list of Standard Choices available. Select the
Disable option to make this list of Standard Choices unavailable.

Type

The Type selection indicates how the Standard Choice functions within Civic Platform.
If you add a Standard Choice that sets specific functionality with Yes or No values,

| Working With FIDs and Standard Choices | 39

select the System Switchtype. System Switch is the default value for newly added
Standard Choices. If you add a Standard Choice that functions as a shared dropdown list, then select the Shared Drop-down Type. If you add a Standard Choice that
functions as an EMSE script, then select the EMSE Type.
Value Desc

Enter a description of the value. In some cases, you can enter specific information,
such as a report string or a URL.

Deleting Standard Choices
You can delete an item from a list of Standard Choices when you no longer want users to select the item.
For example, you might remove an out-of-date report from a list of reports.
You can also choose to disable an item in a list of Standard Choices if you want to use that item again in
the list of choices. For example, you might have seasonal items in a list of Standard Choices that are not
always valid options, such as snow removal in a list of service requests in the winter, that you disable in the
summer.
Note:
You cannot delete a list of Standard Choices; you can only disable it.

To delete a Standard Choices value
1. Find the Standard Choice that you want to delete. For instructions, see Searching for an Existing
Standard Choice.
Civic Platform displays the Standard Choices Item—Edit page.

2. Click Delete by the Standard Choice value that you want to delete.
Civic Platform displays a confirmation pop-up window.
3. Click OK to confirm the deletion.
Civic Platform deletes the Standard Choice item.

Working with FIDs
Note:
Setup the agency organization and the user groups before you configure function identifications.

| Working With FIDs and Standard Choices | 40

Function Identifications (FIDs) control many Civic Platform features. An activated FID can alter the display
or functionality of the Civic Platform software. You activate FIDs for user groups. See Function IDs
Reference for a complete reference of FIDs.
To activate a Function Identification for a user group
1. Log in to Civic Platform as an administrator.
2. ChooseAdmin Tools > User Profile > User Group.
Civic Platform displays the User Group—Search window.

3. Locate the user group for which you want to activate FIDs.
•

Enter the group name and click Submit.

•

Select the module and click Submit.
Note:
The User Group - Edit window contains several hundred line items and can take a couple minutes to
display.

Civic Platform displays the User Group - Edit window.

4. In the Function Name column, mark the check box beside each FID that you want to activate for this
user group.
Civic Platform changes the access level to Full.
5. For each activated FID, mark the option that corresponds with the level of access that you want to grant
to the user group.
No Access

Deactivates the feature entirely for the selected user group. The user group cannot
view this feature.

Full Access

Grants the selected user group permission to perform all actions associated with the
feature.

| Working With FIDs and Standard Choices | 41

Read Only

Allows the selected user group to view and to search information associated with the
feature.

6. Click Save.
To set a FID at the agency level and module level
1. Log in to Civic Platform as a super agency administrator.
2. Navigate to Admin Tools > Agency Profile > Agency Functions.
Civic Platform displays the Agency-Functions-Search page.

3. Specify the search criteria for the module of interest.
•

Click Submit to display a list of all modules for all agencies.

•

Enter an agency code and click Submit to display a list of all modules within the specified agency.

•

Enter an agency code, select a module, and click Submit.
Civic Platform displays the list of modules that match the specified criteria.

4. Select the specific module for which you want to set one or more FIDs.
Civic Platform displays the Agency-Functions-Edit page.

5. Click Save.

| FIDs and Standard Choices Cross Reference | 42

FIDs and Standard Choices Cross Reference
Related Links
Administration
Organizations and Users
Search
User View
System Automation
People
Address, Parcel and Owners (APO)
Electronic Document Review
Workflow
Record Management
Calendars
Communication Manager
Accounting
Time Accounting Tracker
Streamlining Data Processing
Land Management
Asset Management
License and Case Management
Citizen Access Administration
Internationalization and Localization

Administration
Related Links
Civic Platform Setup Portlets
Classic Admin Tools

Civic Platform Setup Portlets
You use the Civic Platform Setup portlet (Figure 2: Civic Platform Setup Portlet) to perform major
administrative tasks. The portlet provides a menu with expanded options and drop-down selections that
link to specific setup portlets.

| FIDs and Standard Choices Cross Reference | 43

Figure 2: Civic Platform Setup Portlet
Civic Platform uses Function Identifications (FIDs) or Standard Choice settings to determine the availability
of the setup portlets. This section lists the required FID(s) and Standard Choice(s) for each setup portlet.
Topics
•

Administration

•

Agency Profile

•

Application

•

Assets

•

Parcels

•

Calendars

•

Communication Manager

•

Conditions

•

Contact

•

License Certifications

•

Data Filter & Query

•

Drill Down

•

Inspection

•

Part

•

Report

•

Structures & Establishments

•

System Tools

•

Finance

| FIDs and Standard Choices Cross Reference | 44

•

Workflow & Activity

•

Work Orders

•

Time Accounting

Administration
Set the FIDs to enable the administration setup portlets.
Table 2: FIDs for Administration Setup Portlets
Setup Portlet

Required FIDs

AA Admin

0318-Administration, 0075-Admin License Types, 0308-Data Manager Export,
0309-Data Manager Import

ACA Admin

0142-Admin Agency Security Policies

Workflow Designer

0346-Workflow Designer

Agency Profile
Set the FIDs to enable the agency profile setup portlets.
Table 3: FIDs for Agency Profile Setup Portlets
Setup Portlet

Required FIDs

APO Form Layout Editor

0268-APO Form Layout Editor

ASI Form Layout Editor

0261-ASI Form Layout Editor

Address Type Group

0276-Address Type Group

Console Configuration

0221-Admin Console Management

Content Customize

0184-Admin Content Customization

Create New Objects

0315-Admin Create New Objects

Dictionary

0354-Custom Dictionary

Form Portlet Designer

0137-Admin Filter View

Link Portlets

0164-Admin Links Portlets

Logo

0187-Admin Upload Logo Image

Menu Navigation

0230-Menu Navigation Admin

My Navigation

0188-Admin Flow Diagram

Portlet

0164-Admin Links Portlets

Regional Settings

0350-Regional Settings

Service

0292-Service Management

Standard Choices

0349-Contact Management

Standard Comments

0290-Admin - Standard Comments

Text Settings

0155-Admin Label Configuration

Application
Set the FIDs to enable the application setup portlets.

| FIDs and Standard Choices Cross Reference | 45

Table 4: FIDs for Application Setup Portlets
Setup Portlet

Required FIDs

ASI Form Layout Editor

0261-ASI Form Layout Editor

ASI Lookup Tables

0259-ASI Lookup Table

ASI Security

0142-Admin Agency Security Policies

Expression Builder

0260-Expression Builder

License Verification

0320-Admin License Verification

Record Type Security

-

Set Type

0351-Admin Set Type

Shared Drop-Down List

0272-Control Shared Drop Down List in Admin

Assets
Set the FIDs to enable the assets setup portlets.
Table 5: FIDs for Assets Setup Portlets
Setup Portlet

Required FIDs

Attribute

0158-Admin Attribute Definition

Attribute Table

0305-Admin Attribute Table Definition

Attribute Template

0158-Admin Attribute Definition, 0159-Admin Attribute Template Definition,
0305-Admin Attribute Table Definition

Condition Assessment

0227-Condition Assessment, 0274-Rating Type

Form Layout Editor

0269-Admin Attribute Form Layout Editor

Rating Type

0274-Rating Type

Security

0255-Manage Asset Type Security

Type

0160-Admin AMS Asset Definition, 0182-Admin GIS Attribute Mapping, 0253Asset GIS Synchronize, 0252-Asset Type Available CAP Type, 0326-Define
Asset Usage Unit Type, 0274-Rating Type

Parcels
Set the FIDs to enable the parcels setup portlets.
Table 6: FIDs for Parcels Setup Portlets
Setup Portlet

Required FIDs

GIS Attribute Mapping

0342-Parcels GIS Attributes Mapping

Calendars
Set the FIDs to enable the calendar setup portlets.

| FIDs and Standard Choices Cross Reference | 46

Table 7: FIDs for Calendars Setup Portlets
Setup Portlet

Required FIDs

Calendar

0336-User Calendar, 0314-Admin Meeting Calendar, 0337-Agency Holiday
Calendar, 0257-Admin Inspection Calendar, 0258-Supervisor Inspection
Calendaring, 0281-Supervisor Master Calendaring

Communication Manager
Set the FIDs to enable the communication manager setup portlets.
Table 8: FIDs for Communication Manager Setup Portlets
Setup Portlet

Required FIDs

Account Settings

0360-Account Settings

Alert

0151-Admin Alert and Rules

Alert Rule

0151-Admin Alert and Rules

Announcement

0134-Admin-Message-General, 0135-Admin-Message-Supervisor

General Settings

0361-General Settings

Notification Templates

0184-Admin Content Customization

Conditions
Set the FIDs to enable the condition setup portlets.
Table 9: FIDs for Conditions Setup Portlets
Setup Portlet

Required FIDs

Conditions

0275-Condition by Group

Contact
Set the FIDs to enable the contact setup portlets.
Table 10: FIDs for Contact Setup Portlets
Setup Portlet

Required FIDs

Contact Type Setting

0340-Reference Contact Type Security

Identifier Fields

0353-Contact Identity Fields

License Certifications
Set the FIDs to enable the license certifications setup portlets.
Table 11: FIDs for License Certifications Setup Portlets
Setup Portlet

Required FIDs

Continuing Education

0311-Admin Continuing Education Info

Education

0310-Admin Education Info

Examination

0312-Admin Examination Info

| FIDs and Standard Choices Cross Reference | 47

Data Filter & Query
Set the FIDs to enable the data filter & query setup portlets.
Table 12: FIDs for Data Filter & Query Setup Portlets
Setup Portlet

Required FIDs

Data Filter

0139-Admin-DataFilter/QuickQuery

Global QuickQueries

0139-Admin-DataFilter/QuickQuery

My QuickQueries

0139-Admin-DataFilter/QuickQuery, 0327-Edit My QuickQuery By
Administration

Drill Down
Set the FIDs to enable the drill-down setup portlets.
Table 13: FIDs for Drill Down Setup Portlets
Setup Portlet

Required FIDs

ASI Drill-Down

0273-ASI Table Drill Down

Inspection
Set the FIDs to enable the inspection setup portlets.
Table 14: FIDs for Inspection Setup Portlets
Setup Portlet

Required FIDs

Inspection Type Security

0142-Admin Agency Security Policies

Part
Set the FIDs to enable the part setup portlets.
Table 15: FIDs for Part Setup Portlets
Setup Portlet

Required FIDs

Part Contact

0214-Admin AMS Parts Vendors and Manufacturers

Part Location

0213-Admin AMS Parts Item Location

Report
Set the FIDs to enable the report setup portlets.
Table 16: FIDs for Report Setup Portlets
Setup Portlet

Required FIDs

Report Manager

0226-Reports Manager Admin, 0240-Reports Manager Admin

SmartChart Queries

0157-Admin SmartChart Query Configuration

SmartCharts

0156-Admin SmartChart Configuration

| FIDs and Standard Choices Cross Reference | 48

Structures & Establishments
Set the FIDs to enable the structures & establishments setup portlets.
Table 17: FIDs for Structures & Establishments Setup Portlets
Setup Portlet

Required FIDs

Attribute

0294-Structure and Establishment, 0158-Admin Attribute Definition

Attribute Template

0294-Structure and Establishment, 0159-Admin Attribute Template Definition,
0158-Admin Attribute Definition, 0305-Admin Attribute Table Definition

Form Layout Editor

0294-Structure and Establishment, 0269-Admin Attribute Form Layout Editor

Type

0294-Structure and Establishment

System Tools
Set the FIDs to enable the system tools setup portlets.
Table 18: FIDs for System Tools Setup Portlets
Setup Portlet

Required FIDs

Audit Log

0307-Audit Logger Definition

Batch Engine

0285-Batch Job Schedule, 0284-Batch Job Maintenance

Delegate User

0286-Delegate User Management

Export

0185-Admin V360 Export

GIS Integration Diagnostics

0348-AA-AGIS Integration Diagnosis Tool

Import

0186-Admin V360 Import

Product License

0300-License Management

PublicUser

8224-Citizen Admin Supervisor

Sequence Generator

0270-Sequence Generator

Social Media

0347-Social Media

Finance
Set the Standard Choice to enable the finance setup portlets.
Table 19: FID or Standard Choice for Finance Calculator Setup Portlets
Setup Portlet

Required FID or Standard Choice

Occupancy

VALUATION_CALCULATOR_VERSION

Receipt Print Audit

0324-Admin Receipt Print Audit

Workflow & Activity
Set the FIDs to enable the workflow & activity setup portlets.
Table 20: FIDs for Workflow & Activity Setup Portlets
Setup Portlet

Required FIDs

Activity Specific Info

0246-Activities Specific Information

| FIDs and Standard Choices Cross Reference | 49

Setup Portlet

Required FIDs

Activity Type

0246-Activities Specific Information

Assign Task

8133-Workflow Task Assignments

Skillset

0150-Admin Workload and Skillset

TSI Form Layout Editor

0267-TSI Form Layout Editor

Workflow Security

8140-Limit Assignments by Dept

Workload

0150-Admin Workload and Skillset

Work Orders
Set the FIDs to enable the work orders setup portlets.
Table 21: FIDs for Work Orders Setup Portlets
Setup Portlet

Required FIDs

Cost Group

0330-Admin Work Order Costing Group Definition

Cost Item

0161-Admin Work Order Costing Item Definition, 0332-Daily Cost Rate
Definition

Work Order Task

0254-WO Task Definition, 0306-Work Order Type

Work Order Template

0169-Admin-Work Order Template, 0170-Admin-WO Template Costing,
0173-WO Template Part, 0254-WO Task Definition

Time Accounting
Set the FIDs to enable the time accounting setup portlets.
Table 22: FIDs for Time Accounting Setup Portlets
Setup Portlet

Required FIDs

Group

0266-Admin Time Accounting Group

Type Maintenance

0264-Admin Time Accounting Type

User Profiles

0265-Admin Time Accounting User Profile, 0332-Daily Cost Rate Definition

Classic Admin Tools
With Civic Platform you can conduct most of the administration tasks. However, a few tasks are still solely
available in the legacy Classic administration portlet (Figure 3: Classic Admin Tools).
The Classic Admin Tools are organized into function groups, such as Fees, Workflow, or Applications.
Within each group is a set of tools that support the function. For example, the User Profile group includes
the Organizations, Groups and Users tools. Civic Platform uses Function Identifications (FIDs) settings to
determine the availability of each tool.

Figure 3: Classic Admin Tools

| FIDs and Standard Choices Cross Reference | 50

This section lists the required FIDs for all the features in Classic Admin Tools.
Topics
•

Agency Profile

•

User Profile

•

Attachments

•

Application

•

People

•

Property

•

Fees

•

Inspection

•

Condition

•

Workflow

•

Calendar

•

Events

•

Help

•

GIS

•

Report Management

Agency Profile
Set the FIDs to enable the agency profile admin tools.
Table 23: FIDs for Agency Profile Admin Tools
Classic Admin Tool

Required FIDs

Standard Choices

0080-Admin Rbizdomain Maintenance

Std Comment

0098-Reference Standard Comments
Note:
If both you enable 0098 and 0290-Admin - Standard Comments,
clicking the tool opens the Standard Comments portlet in Civic
Platform.

APO

0085-Admin APO Template

Oracle Report

0099-Admin Oracle Reports

Security Policy

8162-Application Limit Access by App Type
Note:
Clicking the Application Type Security link opens the Record Type
Security portlet in Civic Platform.
8140-Limit Assignments by Dept
Note:

| FIDs and Standard Choices Cross Reference | 51

Classic Admin Tool

Required FIDs
Clicking the Workflow Task Security link opens the Workflow Task
Security portlet in Civic Platform.
0142-Admin Agency Security Policies
Note:
Clicking the Inspection Type Security link opens the Inspection Type
Security in Civic Platform.
0235-Inspection Default Value Policy, 0236-Inspection Type and Status
Security, 8138-Condition Limit Access by Dept, 0248-Admin-Security PolicyEDMS Access Security, 0224-Active Directory

Setup Text

0155-Admin Label Configuration
Note:
Clicking the tool opens the Text Settings portlet in Civic Platform.

Content Customize

0184-Admin Content Customization
Note:
Clicking the tool opens the Content Customize portlet in Civic
Platform.

Product License

0320-Admin License Verification
Note:
Clicking the tool opens the License Verification portlet in Civic
Platform.

Events (Super agency only)

0076-Accela Events

Login Page Links (Super agency
only)

0120-Accela Login Page Navigation Link Maintenance

Announcements (Super agency only) 0122-Accela System Announcements
Replace Password (Super agency
only)

0128-Accela User Profile Replace Password

OnlineHelp (Super agency only)

0087-Accela Online Help

Functions (Super agency only)

0092-Accela Functions

Version (Super agency only)

0093-Accela Release Versions

Agency (Super agency only)

0094-Accela Agency

Agency Functions (Super agency
only)

0095-Accela Agency Functions

User Profile
Set the FIDs to enable the user profile admin tools.
Table 24: FIDs for User Profile Admin Tools
Classic Admin Tool

Required FIDs

Organization

0045-Admin Organizational Hierarchy

User Group

0096-Admin User Groups

User

0004-Admin Users, 0207-Admin Inspector Districts, 0224-Active Directory

| FIDs and Standard Choices Cross Reference | 52

Attachments
Set the FIDs to enable the attachments admin tools.
Table 25: FIDs for Attachment Admin Tools
Classic Admin Tool

Required FIDs

Document

0108-Admin Document Type

Application
Set the FIDs to enable the application admin tools.
Table 26: FIDs for Application Admin Tools
Classic Admin Tool

Required FIDs

Application Type

0065-Admin Application Types, 0071-Admin Workflow Final Inspection,
0202-Application Type Image, 0244-Fee Estimation, 0245-Long Term Time
Tracking

Application Spec Info

0179-Admin App Spec Info Subgroups, 0242-Required for Fee Calculation

Application Spec Info Table

0205-Admin App Spec Info Table, 0242-Required for Fee Calculation

SmartChoice Group

0061-Admin SmartChoice Code

Renewal Info

0073-Admin Application Renewal Info

Application Status Group

0127-Admin Application Status Group

Find Application Profile

0131-Admin Find App (Custom)

General Profile

0136-Admin Application General Profile

People
Set the FIDs to enable the people admin tools.
Table 27: FIDs for People Admin Tools
Classic Admin Tool

Required FIDs

Licensed Professional

0191-Update license expiration task

Contact

0084-Reference People Contact
Note:
Clicking the tool opens the reference contact portlet in Civic Platform.

People Template

0088-Admin People User Defined Attributes

People Info Table

0250-People Info Table

Property
Set the FIDs to enable the property admin tools.
Table 28: FIDs for Property Admin Tools
Classic Admin Tool

Required FIDs

Address

0006-Reference Property Addresses, 0207-Admin Inspector Districts

| FIDs and Standard Choices Cross Reference | 53

Classic Admin Tool

Required FIDs

Parcel

0005-Reference Property Parcels, 0204-Properties Rename Parcel ID, 0207Admin Inspector Districts, 0241-Parcel Subdivision and Lot Search

Owner

0089-Reference Property Owners

APO Template

0085-Admin APO Template

Structure

0082-Reference Structure, 0194-Access Structure Conditions, 0212Reference Structure Condition History

Structure Template

0083-Reference Structure Template

Address Type Group

0276-Address Type Group
Note:
Clicking the tool opens the address type group portlet in Civic
Platform.

Fees
Set the FIDs to enable the fees admin tools.
Table 29: FIDs for Fees Admin Tools
Classic Admin Tool

Required FIDs

Fee Schedules

0068-Admin Fee Item Sets

Fee Items

0068-Admin Fee Item Sets

Payment Period

0047-Admin Fee Payment Periods

Valuation Calc

0059-Admin Fees Valuation Calculation
Note:
If you enable both the FID and the Standard Choice
VALUATION_CALCULATOR_VERSION, clicking the tool opens the
valuation calculator - occupancy portlet in Civic Platform.

Regional Modifier

0060-Admin Fees Regional Modifier

Copy Schedule

0068-Admin Fee Item Sets

Trust Account

0191-Update license expiration task
Note:
Clicking the tool opens the trust account portlet in Civic Platform.

Manage Schedule

0181-Admin Fees Manage Schedule

Fee Calc

0206-Admin Fee Decisions

Fee Calc Criteria

0206-Admin Fee Decisions

Inspection
Set the FIDs to enable the inspection admin tools.
Table 30: FIDs for Inspection Admin Tools
Classic Admin Tool

Required FIDs

Inspection

0133-Admin Inspection Type Sets, 0218-Admin Auto-Assign Inspection,
0229-Admin display Department, 0232-Admin display Option/Required
column, 0288-Enable Inspection Flow

| FIDs and Standard Choices Cross Reference | 54

Classic Admin Tool

Required FIDs

Inspection Result Group

0123-Admin Inspection Result Group

Guide Sheet

0124-Admin Inspection Guide Sheet, 0256-Carrying over Failed Guide Sheet
Items, 0291-Guide Sheet Template Data

Guide Sheet Group

0125-Admin Inspection Guide Sheet Group

Inspection Grade Group

0339-Inspection Grade Group

Condition
Set the FIDs to enable the condition admin tools.
Table 31: FIDs for Condition Admin Tools
Classic Admin Tool

Required FIDs

Condition Type

0054-Admin Condition Types

Std Condition

0056-Admin Condition Reference
Note:
The condition portlet (0275-Condition by Group) in Civic Platform
provides the same configuration that is available in this admin tool.

Condition Status

0055-Admin Condition Status
Note:
The condition portlet (0275-Condition by Group) in Civic Platform
provides the same configuration that is available in this admin tool.

Process Validation

0058-Admin Workflow Condition Validation

Workflow
Set the FIDs to enable the workflow admin tools.
Table 32: FIDs for Workflow Admin Tools
Classic Admin Tool

Required FIDs

Workflow

0112-Admin Workflow, 0249-Workflow Edit
Note:
The workflow designer portlet (0346-Workflow Designer) in Civic
Platform provides the same configuration that is available in this
admin tool.

Process

0036-Admin Workflow Processes, 0245-Long Term Time Tracking
Note:
The workflow designer portlet (0346-Workflow Designer) in Civic
Platform provides the same configuration that is available in this
admin tool.

Task Status

0063-Admin Workflow Task Status, 0245-Long Term Time Tracking
Note:
The workflow designer portlet (0346-Workflow Designer) in Civic
Platform provides the same configuration that is available in this
admin tool.

| FIDs and Standard Choices Cross Reference | 55

Classic Admin Tool

Required FIDs

Task Specific Info

0143-Admin Workflow Task Spec Info, 0180-Admin Workflow Task Spec Info
Subgroups

Activity

0097-Admin Workflow Review Activity
Note:
The workflow designer portlet (0346-Workflow Designer) in Civic
Platform provides the same configuration that is available in this
admin tool.

eMail Setting

0025-Admin Workflow Email Settings
Note:
The workflow designer portlet (0346-Workflow Designer) in Civic
Platform provides the same configuration that is available in this
admin tool.

eMail Message

0026-Admin Workflow Email Messages

Proximity Alerts

0154-Reference Workflow Proximity Alerts

Report Setting

0192-Workflow Report Setting

Calendar
Set the FIDs to enable the calendar admin tools.
Table 33: FIDs for Calendar Admin Tools
Classic Admin Tool

Required FIDs

Hearing Body

0049-Reference Hearing Bodies

Location

0048-Reference Hearing Locations

Hearing Calendar

0050-Reference Hearing Calendar (old), 0183-Reference Hearing Calendar

Calendar

0115-Reference Calendar Structure, 0116-Admin Calendar Structure
Blockout, 0117-Admin Calendar Inspection Blockout, 0234-Workflow
Calendar, 0247-Agency Workday Calendar

Hearing Reason

0251-Hearing Reason

Calendar Administration

See Calendars

Events
Set the FIDs to enable the event admin tools.
Table 34: FIDs for Event Admin Tools
Classic Admin Tool

Required FIDs

Events

0077-Admin Event Setup

Scripts

0078-Admin Event Script Setup

Script Test

0079-Admin Event Script Test

Batch Job

0106-Admin Batch job
Note:
Clicking the tool opens the batch engine portlet in Civic Platform.

Master Scripts

0077-Admin Event Setup

| FIDs and Standard Choices Cross Reference | 56

Classic Admin Tool

Required FIDs

Custom Script

0077-Admin Event Setup

Help
Set the FIDs to enable the help admin tools.
Table 35: FIDs for Help Admin Tools
Classic Admin Tool

Required FIDs

OnlineHelp

0086-Admin Agency Online Help

Announcements

0121-Admin Agency Announcements
Note:
The announcements portlet (0134-Admin-Message-General) in Civic
Platform provides the same configuration that is available in this
admin tool.

GIS
Set the FIDs to enable the GIS admin tools.
Table 36: FIDs for GIS Admin Tools
Classic Admin Tool

Required FIDs

Dynamic Theme

0111-Admin GIS Dynamic Themes

Reference User Parameter

0111-Admin GIS Dynamic Themes

GIS Search Fields

0118-Admin GIS Search Tools

GIS Service

0107-Admin GIS Service, 0243-GIS Service

GIS Feature

0129-Admin GIS Feature

Establish Genealogy

0130-Admin GIS Establish Genealogy

Proximity Alerts

0153-Reference GIS Proximity Alerts

GIS Map Object Attribute Mapping

0182-Admin GIS Attribute Mapping

Report Management
Set the FIDs to enable the report management admin tools.
Table 37: FIDs for Report Management Admin Tools
Classic Admin Tool

Required FIDs

Report Management

0145-Admin Report Management

Auto Report

0193-Report Management Auto Report

Report Manager Admin

0226-Reports Manager Admin
Note:
Clicking the tool opens the report manager portlet in Civic Platform.

| FIDs and Standard Choices Cross Reference | 57

Organizations and Users
Related Links
Organization Administration
User Group and User Administration
Password Security
Multiple Agency Administration

Organization Administration
Set the following FID for administrators to create and manage organization hierarchy in Civic Platform:
•

0045-Admin Organizational Hierarchy

User Group and User Administration
Set the following FID for administrators to create and manage user groups in Civic Platform:
•

0096-Admin User Groups

•

0004-Admin Users

Password Security
Multi‑agency administrators set requirements for agency‑level password security. This includes setting
minimum password length, character requirements such as a minimum number of numeric characters, and
restrictions such as not allowing a user ID to be part of a password.
Multi-agency administrators can use the PASSWORD_ POLICY _SETTINGS and
PASSWORD_CALCULTION _SCORE Standard Choices to modify or add password requirements.
To configure password security, set the following Standard Choices:
•

PASSWORD_POLICY_SETTINGS

•

PASSWORD_CALCULATION_SCORE

Multiple Agency Administration
The multiple-agency administration feature requires Standard Choice configuration. You must specify one
agency to act as the main agency and the rest as sub-agencies in Civic Platform Classic.
Topics
•

Administering Multiple Agencies

•

Sharing Information across Agencies

•

Configuring Delegate Users

•

Configuring Multiple Agency Services

| FIDs and Standard Choices Cross Reference | 58

Administering Multiple Agencies
Set the following Standard Choice to enable the multiple-agency administration with one agency as the
main agency, and the others as the sub-agencies.
•

MULTI_SERVICE_SETTINGS

Sharing Information across Agencies
Set the following Standard Choice to check for duplicate address, parcel, and owner information in multiple
agencies:
•

APO_CHECK_DUPLICATE

Set the following Standard Choice to share contacts across multiple agencies:
•

CONTACT_ACROSS_AGENCIES

Configuring Delegate Users
You can configure Civic Platform to expose the delegate user portlets and enable the ability of delegate
users to switch between the main agency and sub-agencies.
You must set configurations for each agency and the delegate user configuration can differ from agency to
agency.
Set the following FIDs:
•

0286-Delegate User Management

•

8098-Agency Switch

•

8403-Multi Agency Switch
Note:
Civic Platform can enable the ability to toggle between agencies by two different FIDs. The Multi-Agency
switch controlled by FID 8403 offers more functionality and overrides FID 8098 Agency Switch when you
set both to Full-Access.

Configuring Multiple Agency Services
Set the following FID and Standard Choice:
•

0292-Service Management

•

MULTI_SERVICE_SETTINGS

Set agency priority definitions in the Agency Priority EMSE script. This script determines which agency has
priority over other agencies should multiple agencies offer the same service.

Search
Related Links

| FIDs and Standard Choices Cross Reference | 59

Configuring Global Search
Configuring ‘PERMITS’ Plus Search
Configuring Nearby Query

Configuring Global Search
Civic Platform provides a search engine to find information globally throughout the software. Users enter
search criteria and Civic Platform displays results in a global search portlet grouped by information type.

You can configure search to define how many max records return in a global search and how many result
rows to display in a group results list page. For example, record result information is grouped together in
pages and licensed professional result information is grouped together in pages. Within each group, a user
can filter, page through, or sort through the result information.
The global search function works against indexed content in the Civic Platform database. To ensure the
most accurate and up-to-date search results, configure a batch job to regularly index the Civic Platform
database.
To configure global search, set the following FID(s) and Standard Choices:
•

8434-Global Search

•

GLOBAL_SEARCH_MAX_COUNT

•

BATCH_JOB_SERVICE_CATEGORY

•

GLOBAL_SEARCH_BUILD_INDEX_ENTITIES

Configuring ‘PERMITS’ Plus Search
To configure search in Permits Plus, set the following FID and Standard Choices:

| FIDs and Standard Choices Cross Reference | 60

•

8039-PermitsPlus Historical Data

•

ENABLE_PERMITS_PLUS_SEARCH

Configuring Nearby Query
GIS has the Nearby Query functionality. It enables users to search for records, inspections, and asset
condition assessments within the map extent, within one or more selected GIS features, or near one or
more selected GIS features.
To enable the Nearby Query functionality, one of the tasks is to create and run a geotagging batch job.
Before you create the batch job, set the following Standard Choice:
•

BATCH_JOB_SERVICE_CATEGORY

When your agency uses GIS as an external APO data source, you can also enable the Nearby Query
functionality in the external APO environment, which requires geometry information about addresses and
parcels. To enable Civic Platform to retrieve geometry information from the XAPO data source, set the
following additional Standard Choices:
•

EXTERNAL_ADDRESS_SOURCE

Enter a map service ID as the value description for the SOURCE_MAP_SERVICE_ID value.
•

EXTERNAL_PARCEL_SOURCE

Enter a map service ID as the value description for the SOURCE_MAP_SERVICE_ID value. And enter a
map layer ID as the value description for the SOURCE_MAP_LAYER_ID value.
To set limits on the Nearby Query functionality, for example, the maximum number of GIS features that
users can select to perform a nearby query, set the following Standard Choice:
•

GIS_NEARBY_QUERY_LIMITATION

To disable the Nearby Query functionality including the geotagging feature, set the following Standard
Choice:
•

DISABLE_GIS_NEARBY_QUERY

User View
Related Links
Configuring the Civic Platform Console
Configuring the Form Layout Editor
Accessing QuickQueries
Configuring a Logo or Grade Card
Configuring Shared Drop-Down Lists
Configuring Customized Display
Accessing SmartCharts
Configuring Reports

| FIDs and Standard Choices Cross Reference | 61

Configuring the Civic Platform Console
Topics
•

Configuring the Create New Menu

•

Configuring the Navigation Menu

•

Configuring the Go To Menu

•

Configuring Flow Diagram

•

Configuring Portlets

Configuring the Create New Menu
You can configure the Create New menu item to display for specific user groups and you can configure the
number of create new options that display in the menu.
Set the following FID and Standard Choices:
•

0315-Admin Create New Objects

•

CREATE_NEW_ITEM_DEFAULT_SIZE

•

CREATE_NEW_ITEMS

Configuring the Navigation Menu
You can configure the number of items that display in the Navigation > Recently Viewed menu.
Set the following Standard Choice:
•

RECENTLY_HISTORY_SIZE

Configuring the Go To Menu
You can configure a custom drop-down menu for record detail portlets by customizing the Go To menu tab.
Set the following FID:
•

0230-Menu Navigation Admin

Confirm that you set the value of the Menu_Navigation_Enabled server constant Yes. System
administrators can receive technical assistance from either the Accela Customer Resource Center or an
Accela Services implementation staff to work with server constants.

Configuring Flow Diagram
Set the following FID to enable administrators to set up and manage flow diagrams, each flow diagram
providing list of nodes that help users perform their daily tasks:
•

0188-Admin Flow Diagram

Configuring Portlets
Set the following FID to enable administrators to create their own portlets and embed in Civic Platform
website:

| FIDs and Standard Choices Cross Reference | 62

•

0164-Admin Links Portlets

Configuring the Form Layout Editor
You can configure the Form Layout Editor for each of the following form layout tool types:
To enable the Form Layout Editor tools, set the following FIDs:
•

0137-Admin Filter View

•

0268-APO Form Layout Editor

•

0261-ASI Form Layout Editor

•

0269-Admin Attribute Form Layout Editor

•

0267-TSI Form Layout Editor

To configure ASI Drill-Downs to display, set the following FIDs:
•

0272-Control Shared Drop Down List in Admin

•

0273-ASI Table Drill Down

Set the following Standard Choice to enable custom fonts to populate in the font drop-down list on the
properties window in the form layout editor. Each field on a form has properties you can further define,
including the font type.
•

STANDARD_WEB_FONTS

Accessing QuickQueries
Set the following FID:
•

0139-Admin-DataFilter/QuickQuery

•

0327-Edit My QuickQuery By Administration

Configuring a Logo or Grade Card
To configure the logo or the grade card, set the following FID and Standard Choice:
•

0187-Admin Upload Logo Image

•

LOGO_TYPE_CATEGORY

To associate a logo with an ASI Subgroup, set the following Standard Choice:
•

MULTI_SERVICE_SETTINGS

Configuring Shared Drop-Down Lists
You can enable shared drop-down lists so you can use them for different group codes and templates.
Set the following FID and Standard Choice:
•

0272-Control Shared Drop Down List in Admin

•

ALLOW_SHARED_DROPDOWN_LIST

| FIDs and Standard Choices Cross Reference | 63

Configuring Customized Display
Administrators can customize labels, receipt summaries and check endorsements.
Set the following FIDs:
•

0155-Admin Label Configuration

•

0184-Admin Content Customization

Set the following Standard Choices to define the templates that administrators can create:
•

CONTENT_TEMPLATE_LIST

Accessing SmartCharts
Set the following FIDs for administrators to configure SmartCharts:
•

0156-Admin SmartChart Configuration

•

0157-Admin SmartChart Query Configuration

Set the following FIDs for users to access SmartCharts:
•

8188-SmartChart Display

•

8195-SmartChart Viewer

•

8211-List Driven SmartChart

Configuring Reports
Set the following FIDs for administrators to configure reports:
•

0226-Reports Manager Admin

•

0240-Reports Manager Admin

System Automation
Related Links
Configuring Security Policies
Configuring Autonumbers
Configuring Integration with Social Media
Configuring Import/Export
Configuring Event Manager
Spell Checker

Configuring Security Policies
You can configure Civic Platform security policies through one Standard Choice and several FIDs.
To configure security

| FIDs and Standard Choices Cross Reference | 64

1. Set the following FIDs and Standard Choices:
APPLICATION_TYPE_SECURITY_FID
The Standard Choice value must match the FID number you want to expose for setting in the Record
Type Security portlet.

2. Set the following FIDs:
•

0142-Admin Agency Security Policies

•

0235-Inspection Default Value Policy

•

0236-Inspection Type and Status Security

•

0248-Admin-Security Policy-EDMS Access Security

•

8138-Condition Limit Access by Dept

•

8140-Limit Assignments by Dept

•

8162-Application Limit Access by App Type

Configuring Autonumbers
When a user creates a permit Civic Platform automatically generates and assigns a number to it.
You cannot modify this number. Set the following FID:
•

0270-Sequence Generator

You can configure Civic Platform to allow users to override the generated record ID numbering. Set the
following FID:
•

8097-Manual Application Number Option

To use fiscal year instead of calendar year, set the following Standard Choice:
•

FISCAL_YEAR_START

Configuring Integration with Social Media
Civic Platform now offers integration with Twitter. The integration enables your agency users to post tweets
from the Civic Platform website.

| FIDs and Standard Choices Cross Reference | 65

Set the following FID to enable the Social Media configuration portlet:
•

0347-Social Media

To customize the application name displayed under the tweets to something different than Civic Platform,
set the following Standard Choice:
•

SOCIAL_MEDIA_SETTINGS

Configuring Import/Export
Set the following FIDs and Standard Choice for the Data Manager migration tool, so that administrators
can transfer data between Civic Platform agencies.
•

0318-Administration

•

0308-Data Manager Export

•

0309-Data Manager Import

•

DATA_MANAGER_MAX_RECORD_NUMBER

Set the following FIDs for the import/export system tool, so that administrators can transfer system settings
such as rule settings and QuickQuery settings into an XML file for importing to other agencies.
•

0185-Admin V360 Export

•

0186-Admin V360 Import

Configuring Event Manager
Set the following FIDs to enable administrators add event scripts in Civic Platform.
•

0077-Admin Event Setup

•

0078-Admin Event Script Setup

•

0079-Admin Event Script Test

Set the following Standard Choice to define the length of period during which the EMSE Message List
window has the focus after it appears.
•

EMSE_Settings

Spell Checker
You can configure the spell checker by enabling or disabling it in Civic Platform and Citizen Access.
Set the following Standard Choices:
•

SPELL_CHECKER_ENABLED

•

ACA_SPELL_CHECKER_ENABLED (see the Citizen Access Administrator Guide).

| FIDs and Standard Choices Cross Reference | 66

People
Related Links
Configuring People Template Fields
Configuring Reference Contacts
Configuring Licensed Professional Types

Configuring People Template Fields
Set the following FIDs for administrators to configure people template fields:
•

0088-Admin People User Defined Attributes

•

0250-People Info Table

Set the following FIDs to display people template fields in the contacts portlet and the licensed
professionals portlet:
•

8102-People User Defined Attributes

•

8330-People Info Table

You can configure EMSE as the data source for people template fields, as a drop-down list type, and you
can edit the attribute name.
Note:
If your agency implements multi-agency functionality, duplicate behavior at the super agency can result.
For example, when selecting services for multiple agencies, Civic Platform can route the same questions at
the State, County, or City level. This result occurs if you share template data at the super agency level For
example, if Jon has a licensed professional record that two agencies share and each agency has their own
template, Civic Platform duplicates the information display during multi-services selection.

To use EMSE to auto-populate people template fields
1. Modify the GetPeopleTemplateDropdownListFieldScript sample script for your agency (see Civic
Platform Scripting Guide).
2. Set the following Standard Choice:
•

ENABLE_EMAIL_NOTIFICATION_PROMPT

3. Find the people template field. The data type of the field must be DropDownList. See the “People”
chapter in the Civic Platform Administrator Guide.

| FIDs and Standard Choices Cross Reference | 67

Click the Edit button for the people template field.

4. Mark the EMSE Script Drop Down Lists: check box and assign the data source script for the attribute
field. For example, the newly modified GetPeopleTemplateDropdownListFieldScript.
5. Click the Update button.

Configuring Reference Contacts
To configure contacts and contact addresses, set the following Standard Choices in Civic Platform Classic:
•

ENABLE_CONTACT_ADDRESS

•

ENABLE_CONTACT_ADDRESS_VALIDATION

•

EXTERNAL_CONTACT_ADDRESS_SOURCE_[SOURCE NAME]

•

CONTACT_ADDRESS_TYPE

•

CONTACT RELATIONSHIP

•

CONTACT_TYPE_ENABLE

•

RACE

Set the following Standard Choices in the Standard Choices portlet in the Setup Admin:
•

CONTACT TYPE

•

AUTO_SYNC_PEOPLE

•

INDIVIDUAL_CONTACT_MATCH_CRITERIA

•

ORGANIZATION_CONTACT_MATCH_CRITERIA

•

REFERENCE_CONTACT_RELATIONSHIP

Set the following FIDs for the reference contacts portlet:
•

0084-Reference People Contact

•

0316-Reference Contact Condition

•

0317-Reference Contact Condition History

•

0322-Reference Merge Contacts

•

0355-Reference Contact Relationship

| FIDs and Standard Choices Cross Reference | 68

Configuring Licensed Professional Types
To configure license professional types, set the following Standard Choice in Civic Platform Classic:
•

LICENSED PROFESSIONAL TYPE

Set the following FIDs for the reference licensed professional portlet:
•

0008-Reference Licensed Professionals

•

0070-Reference Condition Licensed Professionals

•

0211-Reference Licensed Professional Cond. History

•

0283-Associated CAP List

•

0323-Disable Licensed Professionals Search

•

0338-Licensed Professional Document List

•

8389-Reference Licensed Professional Comments

Address, Parcel and Owners (APO)
Related Links
Configuring Addresses
Configuring Parcels
Configuring Common APO and External APO Features

Configuring Addresses
Topics
•

Address Administration

•

Managing Reference Addresses

•

Managing Associations with Addresses

Address Administration
Set the following FIDs and Standard Choices for administrators to configure address types and groups:
•

0276-Address Type Group

•

0277-Address Type for the reference address

•

REF_ADDRESS_TYPE

Managing Reference Addresses
Set the following FIDs for users to manage reference addresses:

| FIDs and Standard Choices Cross Reference | 69

•

0006-Reference Property Addresses

•

0321-Reference Address Copy

Agencies can provide an exact numeric street number for search criteria and can return exact address
matches in Civic Platform by enabling the field Street # in the Find Application Profile. To display this field,
you must configure the R1 Server Constant SPECIAL ADDRESS MODEL. Set the constant value to Yes to
display the Street # field in the Application Search Form Profile page.

Managing Associations with Addresses
Civic Platform includes associations between addresses with different records, and different objects (such
as documents, addresses, conditions, and so forth).
Set the FIDs for users to manage the association between addresses and different record types:
Table 38: FIDs for Association with Addresses
Record Type

Required FIDs for Association with Addresses

Comments

8388-Reference Address Comments

Conditions

0208-Reference Address Condition History, 0069-Reference Condition
Addresses

Assets

0222-Address Asset

Inspections

8281-Inspector Districting

PM Schedules

0220-Admin AMS Address PM Schedule

Sets

8378-Address Set Detail

Work Orders

0223-Address Work Order

Configuring Parcels
Topics
•

Managing Reference Parcels

•

Managing Associations with Parcels

| FIDs and Standard Choices Cross Reference | 70

Managing Reference Parcels
Set the following FIDs for users to manage reference parcels:
•

0005-Reference Property Parcels

•

0109-Reference Genealogy Split/Merge

Parcel number mask restricts users to enter the proper values for a parcel number. Set the following
Standard Choice by entering values for PARCEL_ID and PARCEL_ID_MASKED_IN_DB.
•

MASKS

Managing Associations with Parcels
Civic Platform includes associations between parcels with different records, and different objects (such as
documents, addresses, conditions, and so forth).
Set the FIDs for users to manage the association between parcels and different record types:
Table 39: FIDs for Association with Parcels
Record Type

Required FIDs for Association with Parcels

Activities

0239-Activities For People and Property

Addresses

0006-Reference Property Addresses

Conditions

0057-Reference Condition Parcels

Documents

8214-View EDMS Attachment List, 8212-Upload EDMS Attachment, 8240Delete EDMS Attachment

Inspections

8281-Inspector Districting

Owners

0089-Reference Property Owners

Records

0335-Copy or Move Parcel Associated Records

Structures and Establishments

0295-Reference Structure and Establishment

Trust Accounts

0280-Associate Parcel

Configuring Common APO and External APO Features
After your agency’s Civic Platform application leverages APO data, users can take advantage of APO data
to streamline the process of managing Accela records. This section explains the setup tasks for enabling
users to use the reference APO data and the external APO data.
Topics
•

Prerequisite

•

Auto-Populating Parcels and Owners into Records

•

Selecting Multiple APO Data on Application Intake Form

•

Populating APO Information from GIS Objects

•

Populating GIS Objects from APO Information

•

Synchronizing Associated Reference Data

•

Configuring External APO Sources

| FIDs and Standard Choices Cross Reference | 71

Prerequisite
You must make the application intake form available. Configure the following Standard Choice.
•

NEW_SPEAR_FORM_ENABLE

Besides, you must edit the SmartChoice group of the application type to display the Associated GIS
Features section on the application intake form.

Auto-Populating Parcels and Owners into Records
To support populating the parcel information and the owner information associated to that record into
the application automatically after users search for and add an address record, you must configure the
following Standard Choice:
•

ENABLE_AUTO_POPULATE_PARCEL_OWNER

Selecting Multiple APO Data on Application Intake Form
To provide users the ability to select multiple APO or GIS data and attach it to a record, you must configure
the following Standard Choice.
•

MULTIPLE_APO_GIS_SELECTION

Populating APO Information from GIS Objects
To enable users to select GIS objects from the GIS map and populate the APO information into a record,
and to enable users to view the list of GIS objects associated with the selected APO data and set one of
the objects to be primary, you must configure the following Standard Choice.
•

APO_ATTACHMENT_SELECTION

•

ENABLE_SELECT_ADDRESS_OWNER_AFTER_PARCEL

•

ENABLE_SELECT_PARCEL_OWNER_AFTER_ADDRESS

Populating GIS Objects from APO Information
To enable users to view the list of GIS objects associated with the selected APO data and set one of the
objects to be primary, you must configure the following Standard Choice.
•

GIS_ATTACHMENT_SELECTION

•

ENABLE_SELECT_ADDRESS_OWNER_AFTER_PARCEL

•

ENABLE_SELECT_PARCEL_OWNER_AFTER_ADDRESS

Synchronizing Associated Reference Data
You can configure your system so that when you add reference data to or delete reference data from
a record, Civic Platform adds or delete any associated reference data in the record as well, either
automatically or following a prompt. For example, when a user adds information from a reference parcel,
Civic Platform adds information from any address, owner, structure, or establishment record associated
with that parcel to the record, either automatically or following a prompt.

| FIDs and Standard Choices Cross Reference | 72

You must create a mapping between the reference data through the Civic Platform reference data portlets.
The mapping relationships are available in the AGIS_OBJECT and AGIS_OBJECT_ENT tables. Besides,
you must configure the following Standard Choice.
•

APOSE_SYNCHRONIZE

•

STRUCTURE_CAP_ASSOCIATION
Note:
If you configure both Standard Choices, only APOSE_SYNCHRONIZE takes effect.

Configuring External APO Sources
If your agency uses external address, parcel, and owner data sources, you need to configure the following
Standard Choices.
•

EXTERNAL_ADDRESS_SOURCE

•

EXTERNAL_CONTACT_ADDRESS_SOURCE_[SOURCE NAME]

•

EXTERNAL_OWNER_SOURCE

•

EXTERNAL_PARCEL_SOURCE

Electronic Document Review
Note:
If you allow the public to submit documents with Citizen Access, make sure that you have defined PDF as a
document attachment type.
To learn more about defining document attachment types, see “Document Attachments in ACA” in the
Citizen Access Administrator Guide.

Related Links
Configuring the Check-In Revisions Button
Configuring EDR Access
Configuring Action Type Choices on the Document Audit Log
Configuring EMSE Events to Streamline Workflow

Configuring the Check-In Revisions Button
Users check in EDR annotated attachments, from Adobe Acrobat X Pro, with the Check-In Revisions
button in the Civic Platform add-on toolbar for Adobe Acrobat X Pro.
Set the following FID:
•

8474-Check-in Permission

Configuring EDR Access
You set the following FIDs to regulate access to EDR attachments and the ability to assign documents,
annotate them, or set file review status.

| FIDs and Standard Choices Cross Reference | 73

•

8478-Document Assign Permission

•

8477-Document Review Permission

•

8090-Workflow Supervisor

•

8132-Workflow

•

8133-Workflow Task Assignments

•

8140-Limit Assignments by Dept

Configuring Action Type Choices on the Document Audit Log
Set the following Standard Choices:
•

DOCUMENT_AUDIT_ACTION_TYPES

•

E_CODES

•

VIRTUAL FOLDERS (User-defined Name)

•

DOCUMENT_REVIEW_STATUS (User-defined Name)

•

E_CODES

Configuring EMSE Events to Streamline Workflow
You can configure the following events to streamline workflow by providing email notifications upon certain
events.
Table 40: EMSE Events for Electronic Document Review
DocumentUploadAfter

Trigger this event after you upload, check in
or resubmit a document.

DocumentReviewAddBeforeDocumentReviewAddAfter

Trigger this event after you newly assign a
review task.

DocumentReviewDeleteBeforeDocumentReviewDeleteAfter

Trigger this event after you delete a review
task.

DocumentReviewUpdateBefore

Trigger this event after you update a review
task.

DocumentReviewUpdateAfter

Trigger this event after you submit the update
of a review task to the database.

PublishCommentAfter

Trigger this event after you publish the
comments for a document.

Note: Trained administrators must rewrite scripts in collaboration with an Accela Implementation
specialist. Improperly written scripts can seriously damage your system by incorrectly altering or
deleting data for many records. For information on writing scripts and using the Event Manager and
Script Engine tools, see the Civic Platform Scripting Guide.

| FIDs and Standard Choices Cross Reference | 74

Workflow
Related Links
Workflow Administration
Configuring Daily Workflow Management Tab

Workflow Administration
Civic Platform provides a graphical tool (Workflow Designer) and a legacy ‘Classic’ tool for designing
workflows. The Classic Workflow administration tool follows the standard configuration styles in Civic
Platform Classic. Workflow Designer is a graphical design tool much easier to use. Workflow Designer
contains almost all the functions in the Classic Workflow administration tool, but gives you the convenience
to do everything visually. Some workflow related administration functions work with both Workflow
Designer and the Classic Workflow administration tool.
Topics
•

Enabling Workflow Designer

•

Enabling Classic Workflow Administration Tool

•

Common Workflow Configuration Tasks

Enabling Workflow Designer
Set the following FID for administrators to work with Workflow Designer:
•

0346-Workflow Designer

Enabling Classic Workflow Administration Tool
Set the following FIDs for administrators to work in the Classic Workflow administration tool:
•

0112-Admin Workflow

•

0245-Long Term Time Tracking

•

0249-Workflow Edit

•

0036-Admin Workflow Processes

•

0097-Admin Workflow Review Activity

•

0063-Admin Workflow Task Status

Common Workflow Configuration Tasks
No matter whether you work with Workflow Designer or Classic Workflow administration tool, some
functions are common for workflow configuration.

| FIDs and Standard Choices Cross Reference | 75

Table 41: FIDs and Standard Choices for Workflow Administration
Workflow Administration

Required FIDs and Standard Choices

Task Specific Information

0143-Admin Workflow Task Spec Info, 0180-Admin Workflow Task Spec Info
Subgroups, 0267-TSI Form Layout Editor

Workflow Report Settings

0192-Workflow Report Setting

Activity Specific Information

0246-Activities Specific Information

Workflow Security

8140-Limit Assignments by Dept

Workflow E-mail Settings

0026-Admin Workflow Email Messages, 0025-Admin Workflow Email Settings

Workflow Proximity Alerts

0154-Reference Workflow Proximity Alerts

Workload and Skillsets

0150-Admin Workload and Skillset

Configuring Daily Workflow Management Tab
Topics
•

Configuring the Workflow Tab in the Record Portlet

•

Configuring the Workflow Tasks Tab in the My Tasks Page

•

Enabling Supervisory Rights to Workflow Management

•

Configuring the Task Management

•

Deleting Workflow

Configuring the Workflow Tab in the Record Portlet
Users have the option to assign and manage tasks in the Workflow tab of the Record portlet. You can
configure the access to the Workflow tab in the Record portlet.
Set the following FIDs:
•

8132-Workflow

•

8140-Limit Assignments by Dept
Note:
When you set FID 8132 to Full Access, the user has supervisor privileges. For most use cases, set FID
8132 to Read Only and set FID 8140 to Full Access.

Configuring the Workflow Tasks Tab in the My Tasks Page
Users can assign or reassign multiple inspections or workflow tasks from the My Tasks portlet. You can
configure the My Tasks user portlet to display all workflow tasks.
Set the following FIDs:
•

8133-Workflow Task Assignments

•

8143-Inspection Scheduling

| FIDs and Standard Choices Cross Reference | 76

Enabling Supervisory Rights to Workflow Management
Some users may require supervisory rights to manage workflows.
Set the following FID:
•

8090-Workflow Supervisor
Note:
If you enable FID 8090 Workflow Supervisor, and you need to limit Workflow supervisor access, you
must list each functional area you want to restrict in both the APPLICATION_TYPE_SECURITY_FID and
the WORKFLOW_FIDS Standard Choice.

Configuring the Task Management
Set the following FIDs for users to track workflow tasks:
•

8186-Workflow Task Activation

•

8470-Time Accounting on Workflow

•

8207-Workflow Ad Hoc Tasks - 5.2

•

8427-Claim or Release Task Assignment

•

8317-Workflow Calendar

•

0245-Long Term Time Tracking

Deleting Workflow
Set the following FIDs to enable users to delete a workflow process or a task history record associated with
a record:
•

8409-Workflow Delete and Assign

•

8419-Delete Workflow History

Record Management
Related Links
Record Type Administration
Configuring ASI and ASI Tables
Synchronizing Reference Data with Records
Configuring Record Access
Creating Records
Deleting Records
Configuring Associations with Records
Accessing the Record Detail Audit Log

| FIDs and Standard Choices Cross Reference | 77

Record Type Administration
You configure record type additions and record type edits in the AA Classic portlet or in the Setup portlet.
The same set of FIDs control the options in the two places.
Set the FIDs and Standard Choices for administrators to configure record types.
Table 42: FIDs and Standard Choices for Record Administration
Record Administration

Required FIDs and Standard Choices

Record Status Groups

0127-Admin Application Status Group

Record Type

0065-Admin Application Types, 0318-Administration, 0319-Delete ASI
and ASIT on existing CAPs, 0071-Admin Workflow Final Inspection,
CAP_RETAIN_FEESCHEDULE, MULTIPLE_LICENSE_PROFESSIONAL,
ENABLE_CAP_TYPE_ALIAS

Record Types in Citizen Access

0075-Admin License Types, 0108-Admin Document Type, 0244-Fee
Estimation

SmartChoice Groups

0061-Admin SmartChoice Code

Configuring ASI and ASI Tables
Topics
•

ASI and ASI Table Administration

•

ASI and ASI Table Drill-down Administration

•

Configuring ASIs and ASI Table Pop-up Windows

•

Enabling ASI Edits in Records

•

Enabling ASI Edits in Inspection Guide Sheets

•

Enabling Additional Information Fields for Building Permits

ASI and ASI Table Administration
Set the following FIDs:
•

0179-Admin App Spec Info Subgroups

•

0205-Admin App Spec Info Table

ASI and ASI Table Drill-down Administration
Set the following FIDs:
•

0273-ASI Table Drill Down

Configuring ASIs and ASI Table Pop-up Windows
You can configure ASI functionality to display pop-up windows when users change ASI or ASI Table group
information about a record type.
Set the following Standard Choice:
•

ASI_CONFIGS

| FIDs and Standard Choices Cross Reference | 78

To enables the Req for Fee Calc field in the configuration of an application-specific information group or an
application-specific information table group, set the following FID:
•

0242-Required for Fee Calculation

Enabling ASI Edits in Records
Set the following FIDs and Standard Choice:
•

8073-App Spec Info

•

8270-App Spec Info Table

•

8397-ASI Table Delete

•

8329-App Spec Info Supervisor

•

ASI_EDIT_CONTROL_SYSTEM_LEVEL

Enabling ASI Edits in Inspection Guide Sheets
Set the following FIDs and Standard Choice:
•

0291-Guide Sheet Template Data

Enabling Additional Information Fields for Building Permits
If your agency wants to collect additional information about building permits, such as the job value, the
number of buildings, the number of housing units, whether the parcel is public owned, and the type of
construction, set the following FID to make the additional information fields available to users:
•

8033-Additional Information

Set the following Standard Choices to define the default value or the available options for the additional
information field:
•

CENSUS_BUREAU_CONSTRUCTION_TYPE_CODE

•

DEFAULT_HOUSING_UNITS

•

DEFAULT_NUMBER_BUILDINGS

•

DEFAULT_JOB_VALUE

Synchronizing Reference Data with Records
You can configure your system so that when you add reference data to a record or delete reference
data from a record, Civic Platform adds or deletes associated reference data. When working on a parcel
record, for example, Civic Platform can add information from associated address, owner, structure, or
establishment records to that parcel record.
Set the following Standard Choice:
•

APOSE_SYNCHRONIZE

The same processes apply when users delete address, parcel, owner, structure, or establishment records
from a record.

| FIDs and Standard Choices Cross Reference | 79

Civic Platform does not automatically add associated records with locked conditions. If multiple conditions
apply to any of the associated records, a pop‑up window notifies the user of these conditions.
Civic Platform synchronizes reference information when creating new records and when editing existing
records.

Configuring Record Access
You can identify and configure limits for users at the group and the module levels. For example, to set
limits on fees, you can locate the Building Cashier group name in the Building module.
Set the following FID and Standard Choice:
•

8162-Application Limit Access by App Type

•

APPLICATION_TYPE_SECURITY_FID

Creating Records
To enable users to create new records, set the following FIDs:
•

8034-New Application

•

8264-Create from Model

To configure how users enter information when creating records, set the following FIDs:
•

8390-CAP Type picker with Tree

•

8391-Create Multiple CAPs for Parcels

•

8097-Manual Application Number Option

•

8324-Create CAP-Validate

•

8234-Get Address And Owner

•

8232-Get Parcel And Owner

•

8326-Fee Estimate

To configure the options provided when users save a new record, set the following FIDs:
•

8325-Save Work in Progress of CAP

The application intake form contains a number of sections depending on your configuration of the
associated SmartChoice Group. See Record Type Administration. If a SmartChoice-enabled group
does not display, you may not have enabled the information type in the Record portlet. See Configuring
Associations with Records
To configure whether to use a customized tracking number for a new record, set the following Standard
Choice:
•

CUSTOMIZED_TRACKING_NBR

Deleting Records
Set the following FID:
•

8410-Delete CAPs

| FIDs and Standard Choices Cross Reference | 80

You can configure Civic Platform to delete partially completed records. This configuration does not affect
completed records. Set the following Standard Choice:
•

PARTIALLY_COMPLETED_CAP_PURGE_DAYS

Configuring Associations with Records
The Record portlet displays all types of information associated with a record in tabs, or in sections in the
application intake form.
1. To configure access to the Detail tab, the Summary tab, the summary button, and the information
provided in the record summary page, set the following FIDs:
•

8209-Single Portlet Data Summary

•

8395-CAP Summary

•

8411-Cap Summary

•

8400-Manage Inspection

•

8441-Initiated Product Info

2. There are a series of FIDs controlling whether the associated information is available for records.
Table 43: FIDs for Associations with Records
Information Types

Required FIDs for Associations with Records

Addresses

8253-Showing GIS X/Y Locator, 8028-Addresses

Additional Information

8033-Additional Information

App Spec Info and App Spec Info
Tables

See Enabling ASI Edits in Records.

Comments

8110-Application Comment, 8340-Application Comments Edit

Condition and Condition History

8020-Condition Full Privileges8272-Application Condition History, 8365Inheritable editable

Contacts

8031-Contacts

Documents

8212-Upload EDMS Attachment8433-Document Permission Settings. For
configuring document review functions, see Electronic Document Review.

Education and Continuing Education 8420-Daily Education Info, 8421-Daily Delete Required Education, 8428Daily Continuing Education Info, 8429-Daily Delete Required Continuing
Education
Evidence

8332-Evidence8334-Evidence Supervisor

Examination

8430-Daily Examination Info, 8431-Daily Delete Required Examination

Fees

See Accounting.

Hearings

8229-Hearings (obsolete, replaced by 8483)

Inspections

8249-Turn Off the Inspection Tab in CAP List

Owners

8030-Owners

Parcels

8029-Parcels

Payment

See Accounting.

Professionals

8032-Licensed Professionals, 8446-Disable Licensed Professionals Delete

Related Records

8236-Related CAPs-Search, 8292-Create Multiple Related CAPs,
8293-Open New Related CAP in SPEAR, 8323-Update Related

| FIDs and Standard Choices Cross Reference | 81

Information Types

Required FIDs for Associations with Records
Caps, 8460-Delete Related Records, RELATED_CAP_SUMMARY,
RELATED_RECORDS_DEFAULT_VIEW, RELATED_CAP_CONFIG

Renewal

8398-Cap Renewal, RELATED_CAP_SUMMARY

Structure

8103-Structure Tracking

Status and Status History

8141-Application Status, 8142-Application Status History, 8408-Edit
Application Status History

Workflow

See Configuring Daily Workflow Management Tab.

Accessing the Record Detail Audit Log
You can configure Civic Platform for access to the audit log and to view related details for each record.
Note:
System administrators must set the Agency access by setting the Enable Record Audit Log option. These
steps are a pre-requisite to setting the FIDs. For complete agency setup steps, see the section, “Editing
an Agency” in the “Agencies and Functions” chapter in the Civic Platform On-premise Administrator
Supplement.

Set the following FIDs:
•

8422-Random Audit History

•

8443-Application Audit Log

•

8458-Complete Record and ASI Audit

•

8459-Specific Record and ASI Audit Log

•

8444-Application Status History Log

•

8468-Inspections List Guide Sheet Audit Log
Note:
Best practice is to set both FIDs to Full Access for supervisors and administrators, and set 8459 to Full
Access for daily agency users. These settings allow administrators to view the audit logs from both the
Record list portlet and the Record Detail portlet. These settings also allow agency users to view the audit
log for a specific record from the Record Detail portlet.

Calendars
Related Links
Calendar Administration
Configuring Calendars

Calendar Administration
Holiday calendars, meeting calendars, inspection type calendars, and user calendars require Function
Identification (FID) and Standard Choice configuration.
1. Set the FIDs for administrators to work on different calendar types:

| FIDs and Standard Choices Cross Reference | 82

Table 44: FIDs and Standard Choices for Calendar Administration
Calendar Administration

Required FIDs and Standard Choices for Specific Calendar Type

Meeting Calendar

0314-Admin Meeting Calendar

Agency Holiday Calendar

0337-Agency Holiday Calendar

Inspection Calendar

0257-Admin Inspection Calendar, 0258-Supervisor Inspection Calendaring,
0281-Supervisor Master Calendaring

User Calendar

0336-User Calendar

2. Set the following Standard Choices for inspection and meeting calendar types:
•

CALENDAR_BLOCK_SIZE

•

CALENDAR_BLOCK_UNIT

•

USER_DISCIPLINES

•

USER_DISTRICTS

3. Set the following Standard Choices for meeting calendar types:
•

BATCH_JOB_SERVICE_CATEGORY

•

CONTACT TYPE

•

CONTENT_TEMPLATE_LIST

•

MEETING BODY

•

MEETING LOCATION

•

MEETING MAX TIME

•

MEETING_REASON_COMMENT

•

MEETING_TYPE_STATUS_GROUP

•

MEETING_TYPE_STATUS_{Group Name}

4. Set the following Standard Choices for inspection calendar types:
•

CREATE_NEW_INSPECTION_WHEN_RESCHEDULE

•

INSPECTOR_WORKLOAD_CALENDAR_TIME

5. Set the following Standard Choices for user calendar types and inspection calendar types:
•

CALENDAR_SETTING

6. Set the following Standard Choices for Citizen Access inspection calendars:
Table 45: Standard Choices for ACA Inspection Calendars
Standard Choice

Standard Choice Value

SCHEDULE_INSPECTION_IN_ACA

NONE. When you select this value, the associated inspection type
displays on the ACA Inspection list but public users cannot request,
scheduled, or cancel the inspection.

| FIDs and Standard Choices Cross Reference | 83

Standard Choice

Standard Choice Value
REQUEST_ONLY_PENDING. When you select this value, public
users can request or cancel a pending inspection, they cannot
schedule the inspection.
REQUEST_SAME_DAY_NEXT_DAY. When you select this value,
public users must choose from three inspection scheduling options:
Same Day, Next Business Day, and Next Available Day.
SCHEDULE_USING_CALENDAR. When you select this value,
public users can schedule inspections by selecting a date and time
from the inspection type calendar. The Same Day, Next Business
Day, and Next Available Day options are unavailable.
Note: The values you enter for this Standard Choice
populate the Schedule Inspection in the ACA drop-down
list in the Calendar Administration portlets. The value
selected from the drop-down list determines how public
users can schedule inspections in ACA.

Configuring Calendars
Set the following FIDs to enable users’ access to different types of calendars:
Table 46: FIDs and Standard Choices for Calendar Access
User Calendar Access

Required FIDs and Standard Choices for Specific Calendar Type

Event Calendar

8347- User Event Calendar

Meeting Calendar

8482-Create a Set in Record List, 8432-User Meeting Calendar

Inspection Calendar

8144-Inspection Results Supervisor, 8345-User Inspection Calendar

Communication Manager
Related Links
General Settings
Account Settings
Message Settings

General Settings
Set these FIDs to enable communication manager general settings:
•

8492-Communication List

•

0361-General Settings

•

8494-Record Communication List

Define SMS providers in the following Standard Choices:
•

COMMUNICATION_SMS_PROVIDERS

| FIDs and Standard Choices Cross Reference | 84

Account Settings
Set these FIDs to enable the account setting configuration in Civic Platform:
•

8492-Communication List

•

0360-Account Settings

Besides configuring email accounts in the Account Settings portlet, you can also configure a few to and
from emails in Standard Choices:
•

ACA_EMAIL_TO_AND_FROM_SETTING

•

ACA_EMAIL_REGISTRATION_TO

•

ACA_EMAIL_REGISTRATION_FROM

•

AGENCY_EMAIL_REGISTRATION_TO

Message Settings
Set the following FIDs to enable administrators to configure alerts, rules, announcements, and notification
templates configuration in Civic Platform:
•

0151-Admin Alert and Rules

•

0134-Admin-Message-General

•

0135-Admin-Message-Supervisor

•

0184-Admin Content Customization

Accounting
Related Links
Fee Item Administration
Managing Fees in Records
Configuring Payments
Configuring Invoice Options
Configuring Trust Accounts
Configuring Cashier Workstation
Configuring Valuation Calculation
Configuring Void and Refund Reason Options

Fee Item Administration
Set the following FIDs and Standard Choices for administrators to configure fee items, including fee
estimation:

| FIDs and Standard Choices Cross Reference | 85

Table 47: FIDs and Standard Choices for Fee Item Administration
Fee Item Administration

Required FIDs and Standard Choices

Fee Items

0068-Admin Fee Item Sets, FULL_PAY_ALLOCATION_OPTIONS,
FEE_QUANTITY_ACCURACY

Fee Schedules

0181-Admin Fees Manage Schedule

Payment Periods

0047-Admin Fee Payment Periods

Valuation Calculation

0059-Admin Fees Valuation CalculationVALUATION_CALCULATOR_VERSION

Regional Modifiers

0060-Admin Fees Regional Modifier

Fee Calc. and Fee Calc. Criteria

0206-Admin Fee Decisions, 0242-Required for Fee Calculation,
DISABLE_FEE_CALC_FACTOR_DROPDOWN_FOR_MODULES

Fee Estimation (for ACA)

0244-Fee Estimation

Managing Fees in Records
Set the following FIDs for users to add and manage record fee items in the Fees tab of the Record portlet,
or the Fees in the application intake form.
•

8271-Fees Recalculate Fees

•

8104-Assess Fees

•

8313-Fee Item Note

•

8456-Fee Schedule Drop Down List

•

8326-Fee Estimate

Set the following FIDs for users to void fees, including invoiced fees, paid fees, and those fees related to
point of sale.
•

8333-Void Invoiced But Unpaid Fee

•

8348-Void Paid Fee

•

8366-Void Payment

To allow a supervisor to void any non-paid fees but restrict them from voiding paid fees, enable FID 8333
and disable FID numbers 8348 and 8366 (see Figure 4: Configuring Authority to Void Fees).

| FIDs and Standard Choices Cross Reference | 86

Figure 4: Configuring Authority to Void Fees
A. When FID 8333, 8348 and 8366 are enabled, the Void button is available.
B. When FID 8333, 8348 and 8366 are disabled, the Void button is not available.
If FID 8366 is enabled then 8333 should be enabled (Point of Sale functions).
If FID 8333 is enabled then 8348 should be enabled (Void record Fee functions).

Configuring Payments
Topics
•

Configuring the Payment Processing Portlet

•

Configuring the Payment Tab

•

Configuring the Point of Sale

•

Accessing Automatic Payment Allocation

•

Configuring Payment Account Type Options

•

Configuring Credit Card and Check Type Options

Configuring the Payment Processing Portlet
Users can use the Payment Processing portlet to process the payments for one or more records and POS
items as a whole.
1. Set the following FIDs for the Payment Processing console:
•

8393-Payment Processing

•

8415-Refund Payment

•

8414-Void Payment

•

8416-Invoices Management

| FIDs and Standard Choices Cross Reference | 87

•

8394-Payment History

•

8417-Enable POS

2. Set the following Standard Choices to configure the payment methods:
•

PAYMENT_PROCESSING_METHOD

•

PAYMENT_PROCESSING_DEFAULT_METHOD

3. You can enable a Received drop-down list field on all payment locations in Civic Platform, such as the
Payment Processing console or the Record Payment tab. This field displays the manner of payment
receipt. Set the following Standard Choice:
•

PAYMENT_RECEIVED_TYPE

4. You can define the receipt mask to use in the Payment Processing portlet. Set the following Standard
Choice:
•

PAYMENT_PROCESSING_RECORD_RECEIPT

Configuring the Payment Tab
Your agency can determine whether to enable all of the options on the Payments tab in the user
experience for a module, enable certain functions, or remove the Payments tab. When enabled, the
Payment tab allows agency cashiers to locate and apply payments within an individual record. This tab
displays in multiple modules within Civic Platform including Building, Sets, and Licenses.
1. Set the following FIDs for the functions in the Payment tab:
•

8108-Cashier Payment

•

8435-Daily - Cashier - Pay More

•

8436-Daily - Cashier - Apply

•

8437-Daily - Cashier - Refund

•

8438-Daily - Cashier - Void

•

8439-Daily - Cashier - Generate Receipt

•

8440-Daily - Cashier - Fund Transfer

2. Set the following FID and Standard Choice for automatic receipt generation:
•

8108-Cashier Payment

•

AUTO_GENERATE_RECEIPT

3. Set the following Standard Choice to allow users to transfer of payments to future invoices:
•

ALLOW_PAYMENT_OF_FUTURE_FEES

Configuring the Point of Sale
Point of sale fees work like all other fees in Civic Platform. You add, assess, and process a fee item
through a cashier payment without an associated record or associated service request. Civic Platform

| FIDs and Standard Choices Cross Reference | 88

automatically invoices point of sale fee items so users can only add and void fee items. Civic Platform
applies point of sale payments, without a payment apply screen.
1. Set the following FIDs:
•

8288-Fees Point Of Sale

•

8289-Fees Point Of Sale Refunds

2. Set the following Standard Choices in the order shown:
Note:
The POINT_OF_SALE_TYPE and POINT_OF_SALE_FEE_SCHEDULE Standard Choices each require
Values and Value Descriptions for the point of sale feature to work.

•

POINT_OF_SALE_TYPE

•

POINT_OF_SALE_FEE_SCHEDULE

Note that currently, Citizen Access only supports fee items related to a record, not to a point of sale fee
item. However, when Citizen Access does support point of sale fee items, enter USER=Public in the Value
Desc field. Then enter a record ID to apply a dummy record ID for each fee item Value. The record ID must
follow the format of xxxxx-xxxxx-#xxxx where xxxx is any alphanumeric value. For example, if Media is the
Value, then the Value Desc field might look like this USER=Public;CapID=10POS-0000-#0000.

Accessing Automatic Payment Allocation
Set the following FID:
•

8463-Payment Auto Allocation

Configuring Payment Account Type Options
You can configure Civic Platform to control the Account and Check Types options displayed in the Check
Payment user page.
Set the following Standard Choice:
•

PAYMENT_CHECK_ACCOUNT_TYPE

Configuring Credit Card and Check Type Options
You can define credit card types and check types so that your agency can accept payments from credit
cards or from checks.
Set the following Standard Choice:
•

PAYMENT_CREDITCARD_TYPE

•

PAYMENT_CHECK_TYPE

Configuring Invoice Options
You can configure Civic Platform so that after a user assesses one or more fees for a record, Civic
Platform automatically invoices the fees. Set the following Standard Choice:
•

AUTO_INVOICE_MODULE

| FIDs and Standard Choices Cross Reference | 89

Set the following Standard Choice to configure a single invoice for multiple records:
•

ONE_INVOICE_FOR_ALL_CAPS

You can configure Civic Platform so that users can collect all invoices for a workweek or given date range
into a batch and print each invoice to mail to the responsible party. Set the following FID and Standard
Choices:
•

8367-Manage Batch Invoice

•

SINGLE_INVOICE_REPORT

•

BATCH_INVOICE_REPORT

Configuring Trust Accounts
Topics
•

Configuring Trust Account Management

•

Configuring Trust Account Payment Method

Configuring Trust Account Management
Set the following FIDs:
•

0190-Manage Trust Account

•

0278-Associate People

•

0279-Associate Address

•

0280-Associate Parcel

•

0331-Trust Account Associated Record

•

8342-Auto Create Trust Account

Set the following Standard Choices:
•

GLOBAL_TRUST_ACCOUNT

•

TRUST_ACCOUNT_ADMINISTRATOR

Configuring Trust Account Payment Method
Set the following FIDs:
•

8267-Enable Payment by Trust Account

•

8286-Fees Print Receipt Summary

•

8341-Auto Pay

•

8465-Deposit Trust Account During the payment

Set the following Standard Choices:

| FIDs and Standard Choices Cross Reference | 90

•

AUTO_PAY_TRUST_ACCOUNTS

•

DEPOSIT_FOR

•

PAYMENT_PROCESSING_DEFAULT_METHOD

•

TRUST_ACCOUNT_ONLY

•

PAYMENT_PROCESSING_METHOD
Note:
Note that you must add the Trust Account field to the payment portlet, such as the Pay Form, in the Form
Portlet Designer, to enable users to select a trust account during the payment process.

Configuring Cashier Workstation
Topics
•

Configuring a Cashier Drawer for ACA Public Users

•

Configuring Cashier Sessions

Configuring the Cash Drawer
You can configure Civic Platform to identify specific computers to accept payments, and identify which
computers to be the cash drawer to receive payments.
Set the following FIDs and Standard Choices:
•

8261-Open Cash Drawer

•

LIMIT_WORKSTATION_ACCEPT_PAYMENT

•

CASHIER_STATION

Configuring a Cashier Drawer for ACA Public Users
Citizen Access does not support Standard Choice CASHIER_STATION. However, You can assign Citizen
Access public users an optional default Cashier ID in their user profile. You can assign a default Cashier ID
for Citizen Access public users that do not have a Cashier assigned in their user profile.
Set the Standard Choices ACA_WORKSTATION_ID and ACA_TERMINAL_ID.
Table 48: Standard Choices for ACA Public User Cash Drawer
Standard Choice

Standard Choice Value

ACA_WORKSTATION_ID

A generic workstation ID to use for the default Citizen Access cashier drawer.

ACA_TERMINAL_ID

A generic terminal ID to use for the default Citizen Access for cashier drawer.

Configuring Cashier Sessions
You can configure a cash drawer to run cashier sessions, open the cash drawer, print receipts with a
receipt printer, and print endorsements on the back of checks.
You can also track the value of transactions recorded during a cashier session by entering the total in
the Deposit Slip # field before ending the session. In the Deposit Date field, supervisors can use the date

| FIDs and Standard Choices Cross Reference | 91

picker icon to select a date or manually edit date, and after submittal, they can modify the Deposit Slip #
and the Deposit Date fields.
1. Set the following FIDs and Standard Choices:
•

8251-Cashier Session

•

8259-Cashier Session Supervisor

2. Specify whether to capture the cash drawer by setting the Standard Choice as follows:
•

CASH_DRAWER_STARTING_ENDING_BALANCE

Configuring Valuation Calculation
Set the following FIDs to enable valuation calculation for records:
•

8038-Valuation Calculation

•

8406-Edit Valuation Calculator Unit Cost

Configuring Void and Refund Reason Options
Set the following Standard Choices to define the reason options for users to select when they want to void
an invoice or payment, or refund a payment:
•

REFUND_PAYMENT_REASON

•

VOID_INVOICE_REASON

•

VOID_PAYMENT_REASON

Time Accounting Tracker
Related Links
Time Accounting Administration
Configuring a List of Agency Vehicles
Configuring the Time Accounting Portlet
Adding Time Accounting Entries in Inspections and Workflow

Time Accounting Administration
Set the following FIDs for administrators to configure the time accounting user profiles, time accounting
types and time accounting groups:
•

0264-Admin Time Accounting Type

•

0265-Admin Time Accounting User Profile

•

0266-Admin Time Accounting Group

| FIDs and Standard Choices Cross Reference | 92

Configuring a List of Agency Vehicles
To create the list of agency vehicles referenced in one-time accounting, configure Standard Choice
VEHICLE to include any Standard Choice Values supported by your agency, such as a street cleaner or a
dump truck. These Values display for the Civic Platform user in the Vehicle ID drop-down list.
•

VEHICLE

Configuring the Time Accounting Portlet
Set the following FIDs to assign users rights to the Time Accounting portlet, so they can create and edit
time accounting records:
•

8369-User Time Accounting Daily

•

8375-Time Accounting Administrator

•

8376-Time Accounting Supervisor

Set the following Standard Choice to define the default Logged From date in the time accounting search
portlet.
•

FIND_TIME_ACCOUNTING_LOGGED_DATE_RANGE

Adding Time Accounting Entries in Inspections and Workflow
You can configure Time Accounting tracker to allow users to add multiple time accounting entries on
inspections and workflow tasks, within Civic Platform and Mobile Office.
On the Inspections page and the Workflow page in Civic Platform, a Time Spent on Task section that
provides hours for different time accounting groups. The time accounting fields that display are: Time spent
on Inspection and Total time. For each task, Civic Platform lists Duration, Start and End Time, Group, and
Type. An Actions drop-down list provides users with modify, delete, or lock and unlock options.
The Actions drop-down list does not display on entries that have a locked status by the Administrator.
Set the following FIDs:
•

8462-Time Accounting on inspections

•

8470-Time Accounting on Workflow

Streamlining Data Processing
Related Links
Accessing Expression Builder
Configuring Conditions
Configuring Sets
Configuring Audit Log
Configuring the Batch Engine

| FIDs and Standard Choices Cross Reference | 93

Accessing Expression Builder
Set the following FIDs:
•

0260-Expression Builder

Configuring Conditions
Topics
•

Condition Administration

•

Configuring the Condition Audit Log

•

Configuring Required Condition Severity Status

•

Managing Daily Conditions

•

Managing Conditions of Approval

Condition Administration
Set the following FIDs and Standard Choices for administrators to configure condition types, condition
groups, standard conditions, and related condition settings:
•

0275-Condition by Group

•

0054-Admin Condition Types

•

0055-Admin Condition Status

•

0056-Admin Condition Reference

•

0058-Admin Workflow Condition Validation

•

8138-Condition Limit Access by Dept

•

CONDITIONS_OF_APPROVALS

•

ENABLE_MULTIPLE_CONDITION_GROUP_FOR_TYPE

•

CONDITION TYPE

Configuring the Condition Audit Log
Set the following FIDs:
•

0333-Condition List Audit Log

•

0334-Condition Detail Audit Log

To enable the condition audit log, you must set the Standard Condition, the Record Condition and
Reference Condition to Yes, as a prerequisite, in the Agency Profile settings.

| FIDs and Standard Choices Cross Reference | 94

Configuring Required Condition Severity Status
Civic Platform provides default status options, such as “Required” in the Severity drop-down list for
conditions. The Severity drop-down list is available in portlets when defining conditions and when viewing
the condition for a record. Each condition status provides a level of restriction.
Set the following Standard Choices:
•

REMOVE_REQUIRED_IN_ADMIN_CONDITIONS

•

REMOVE_REQUIRED_IN_DAILY_CONDITIONS

Managing Daily Conditions
Set the following FIDs to enable users to associate conditions with different types of records:
Table 49: FIDs for Condition Tabs
Portlet

Required FIDs for Associated Condition Tab

Addresses

0208-Reference Address Condition History, 0069-Reference Condition
Addresses, 8457-Create Free Form Condition

Assets

8282-Asset Condition, 8457-Create Free Form Condition

Contacts

0316-Reference Contact Condition, 0317-Reference Contact Condition
History, 8457-Create Free Form Condition

Inspections

8020-Condition Full Privileges, 8457-Create Free Form Condition

Licensed Professionals

0070-Reference Condition Licensed Professionals, 8457-Create Free Form
Condition

Owners

0110-Reference Owner Condition, 0210-Reference Owner Condition History,
8457-Create Free Form Condition

Parcels

0057-Reference Condition Parcels, 0209-Reference Parcel Condition History,
8457-Create Free Form Condition

Record

8020-Condition Full Privileges, 8272-Application Condition History, 8266Check reference object condition, 8457-Create Free Form Condition

Set

8381-Address Set Condition, 8357-Set Conditions, 8386-Licensed
Professional Set Condition, 8352-Parcel Set Create Conditions, 8457-Create
Free Form Condition

Structures and Establishments

0296-Structure and Establishment Condition, 8457-Create Free Form
Condition

Set the following FID to give users the option for child records to inherit conditions from their parent:
•

8365- Inheritable editable

| FIDs and Standard Choices Cross Reference | 95

Set the following two FIDs for conditions in reference structures in Civic Platform Classic Daily:
•

0194-Access Structure Conditions

•

0212-Reference Structure Condition History

Set the following Standard Choices for configuring the options when adding daily conditions:
•

CLONE_REFERENCE_CONDITION

•

UPDATE_REFERENCE_CONDITION

•

ENABLE_ADD_MULTIPLE_CONDITIONS

Set the following Standard Choices if you allow users to view conditions in partial records or the application
intake form:
•

PARTIAL_CAP_CONDITION_ENABLE

•

NEW_SPEAR_FORM_ENABLE

Set the following Standard Choice if you only allow users to update the status date when a record satisfies
a condition or condition of approval:
•

ENABLE_CONDITION_RESOLVED_DATE

Set the following Standard Choice to allow users to use EMSE in Citizen Access to assign conditions to
records:
•

ACA_CONDITION_AGENCY_USER (see the Citizen Access Administrator Guide)

Managing Conditions of Approval
Set the following Standard Choice to enable the Conditions of Approval feature:
•

CONDITIONS_OF_APPROVALS

Set the following Standard Choices and FIDs for configuring the Conditions of Approval feature:
•

8480-Conditions of Approval

•

8481-Delete Conditions of Approval

•

CONDITION_PRIORITIES

•

REMOVE_REQUIRED_IN_ADMIN_CONDITIONS

•

STATUS_OF_CONDITIONS_OF_APPROVAL

•

ENABLE_CONDITION_RESOLVED_DATE

Configuring Sets
The Set function lets you organize multiple Records, Parcels, Addresses, Licensed Professionals, random
audits and even existing sets into a group, or set, and then use the group for batch processing. The
set portlet displays a tab for each set type and provides set details that accommodate the functionality
configured for each.
Set the FIDs for different set type according to the table below:

| FIDs and Standard Choices Cross Reference | 96

Table 50: FIDs for Set Types
Set Type

Required FIDs

Records

8074-Set Header Maintenance, 8075-Set Detail Maintenance, 8121-Set
Payment, 8356-Set Cloning, 8358-Set Comments, 8359-Set Scripts, 8362Set Owners, 8361-Set Licensed Professionals, 8363-Set Contacts, 8364-Set
Status Change, 8357-Set Conditions

Parcels

8349-Parcel Set Detail, 8350-Edit Parcel Set Members, 8355-Parcel Set
Execute Script, 8353-Parcel Set Create Owners, 8351-Parcel Set Create
CAPs, 8381-Address Set Condition, 8352-Parcel Set Create Conditions

Addresses

8378-Address Set Detail, 8379-Address Set Members, 8380-Address Set
Comments, 8382-Address Set Execute Script

Licensed Professionals

8383-Licensed Professional Set Detail, 8384-Licensed Professional Set
Members, 8385-Licensed Professional Set Comments, 8387-Licensed
Professional Set Execute Script, 8386-Licensed Professional Set Condition

Sets

8370-Set of Sets Detail, 8371-Set of Sets Members, 8372-Set Analysis, 8373Fee Analysis, 8374-Set of Sets Payment, 8404-Void Payment

Random Audits

8422-Random Audit History, 8423-Random audit set, 8424-Re-generate/
Delete Random Audit Set, 8425-Execute Script, 8426-Random Audit
Supervisor

Set the Standard Choices to add multiple EMSE scripts for each set type:
•

CAPSET_SCRIPT_LIST

•

PARCELSET_SCRIPT_LIST

•

ADDRESSSET_SCRIPT_LIST

•

PROFESSIONALSET_SCRIPT_LIST

•

AUDITSET_INSPECTION_SCRIPT_LIST

•

AUDITSET_SCRIPT_LIST

Set the additional two Standard Choices for random audit sets:
•

MODULE_AUDIT_FREQUENCY

•

RANDOM_AUDIT

Configuring Audit Log
Set the FIDs for users to view the audit logs for different records:
Table 51: FIDs for Audit Logs
Record Type

Required FIDs for Enabling Audit Log

Conditions

0333-Condition List Audit Log, 0334-Condition Detail Audit Log

Inspections

8442-Inspection History Audit Log, 8468-Inspections List Guide Sheet Audit
Log, 8469-Inspections Detail Guide Sheet Audit Log

Record

8408-Edit Application Status History, 8444-Application Status History Log,
8410-Delete CAPs, 8443-Application Audit Log

| FIDs and Standard Choices Cross Reference | 97

Configuring the Batch Engine
You can configure Civic Platform so users can schedule batch jobs and run batch jobs that automatically
synchronize asset and GIS records or that automatically generate work orders from pm schedules.
Set the following FIDs and Standard Choices:
•

0284-Batch Job Maintenance

•

0285-Batch Job Schedule

•

BATCH_JOB_TYPE

•

BATCH_JOB_SERVICE_CATEGORY

•

BATCH_JOB_SCHEDULE_FREQUENCY

•

BATCH_JOB_SCHEDULE_TYPE

•

BATCH_JOB_STATUS

•

BATCH_JOB_RESULT

•

BATCH_JOB_PM_ADVANCE_PERIOD

Land Management
Related Links
Configuring Structures and Establishments
Configuring Enforcement and Case Management
Configuring Plan Review
Configuring Inspections

Configuring Structures and Establishments
Topics
•

Structures and Establishments Administration

•

Managing Reference Structures and Establishments

•

Managing Associations with Structures and Establishments

Structures and Establishments Administration
Set the following FIDs and Standard Choices for administrators to configure structures and establishments
types and attributes:
•

0294-Structure and Establishment

•

0158-Admin Attribute Definition

•

0159-Admin Attribute Template Definition

| FIDs and Standard Choices Cross Reference | 98

•

0269-Admin Attribute Form Layout Editor

•

0305-Admin Attribute Table Definition

•

STRUCTURE_ESTABLISHMENT_STATUS

•

STRUCTURE_ESTABLISHMENT_LAND_USE

Managing Reference Structures and Establishments
Set the following FIDs for users to manage reference structures and establishments:
•

0295-Reference Structure and Establishment

•

0296-Structure and Establishment Condition

•

0297-Structure and Establishment History

•

TIME_MODULES

Managing Associations with Structures and Establishments
Civic Platform includes associations between structures and establishments with different records, and
different objects (such as documents, addresses, conditions, and so forth).
Set the FIDs for users to manage the association between structures and establishments (S&E) and
different record types:
Table 52: FIDs for Association with Structures & Establishments
Record Type

Required FIDs for Association with S&E

Addresses

0006-Reference Property Addresses

Owners

0089-Reference Property Owners

Records

8405-Structure and Establishment

Parcels

0005-Reference Property Parcels

Licensed Professionals

0371-Professional List

Set the following Standard Choices:
•

STRUCTURE_APO_ASSOCIATION

•

STRUCTURE_CAP_ASSOCIATION

•

STRUCTURE_ESTABLISHMENT_APO_ASSOCIATION

Configuring Enforcement and Case Management
Topics
•

Configuring the Evidence Portlet

•

Configuring Complaint, Priority, and Address Types

| FIDs and Standard Choices Cross Reference | 99

Configuring the Evidence Portlet
You can configure Civic Platform to enable various fields for enforcement and for case management. Much
of the functionality involves the Evidence portlet.
Set the following Standard Choices:
•

EVIDENCE_TYPE

•

EVIDENCE_LOCATION

•

EVIDENCE_UNITS_MEASURE

•

DISPOSITION

Configuring Complaint, Priority, and Address Types
To streamline creation of case applications, you can configure Civic Platform to display set values in the
Report Type, Priority, and Address Type fields.
Set the following Standard Choices:
•

COMPLAINT REFERRED TYPE

•

PRIORITY

•

AA_EDMS_DISALLOWED_FILE_TYPES

Configuring Plan Review
Topics
•

Displaying Related and Renewal Record Documents

•

Configuring Image Format

Displaying Related and Renewal Record Documents
Administrators can configure the ability to display documents associated with related records or renewal
records. For example, an agency can research a license record and can review the documents associated
with both the current record and all the renewals for the license. After enabling this feature, you can access
associated (child) documents in the record document detail area.
Set the following Standard Choice:
•

CAP_CHILD_DOCUMENT

Configuring Image Format
You can associate display images with application type and with records. You can select an image in the
Application Type page for an application type or in the Documents portlet for a record. When a record is
also an instance of the application type, the display image associated with the record takes precedence.
You can configure Civic Platform to use image file formats different from the default format.
Set the following Standard Choice:
•

CAP_DETAIL_ICON_FILE_FORMATS

| FIDs and Standard Choices Cross Reference | 100

Configuring Inspections
Topics
•

Inspection Administration

•

Enabling Inspection Management

•

Scheduling Inspections

•

Assigning and Auto-Assigning Inspections

•

Entering Guidesheet Items

•

Resulting Inspections

•

Planning Inspection Route Sheets

•

Viewing Inspection Audit Logs

•

Accessing Inspection Documents

•

Configuring the GIS Button on the Inspection List Portlet

•

Enabling External Inspectors to Work with Inspections

Inspection Administration
Set the FIDs and Standard Choices for administrators to configure inspection types and groups,
guidesheets, inspector profiles, and result groups.
Table 53: FIDs and Standard Choices for Inspection Administration
Inspection Administration

Required FIDs and Standard Choices

Inspection Types and Groups

0133-Admin Inspection Type Sets, 0218-Admin Auto-Assign Inspection, 0229Admin display Department, 0232-Admin display Option/Required column,
0288-Enable Inspection Flow, 0289-Enable Inspection Milestone

Inspection Guide Sheets

0124-Admin Inspection Guide Sheet, 0125-Admin Inspection Guide Sheet
Group, 0256-Carrying over Failed Guide Sheet Items, 0291-Guide Sheet
Template Data

Inspection Result Group

0123-Admin Inspection Result Group

Inspector Profiles

0207-Admin Inspector Districts, INSPECTION_SETTING,
INSPECTION_ROUTE_TYPE, USER_DISTRICTS, USER_DISCIPLINES,
INSPECTOR_WORKLOAD_CALENDAR_TIME

Enabling Inspection Management
Set the following FID and Standard Choice:
•

8400-Manage Inspection

•

KEEP_COMPLETED_INSPECTION_ACTIVE

| FIDs and Standard Choices Cross Reference | 101

Scheduling Inspections
Set the following FIDs and Standard Choices:
•

8143-Inspection Scheduling

•

8241-Inspection New Inspection

•

8255-Update Inspection Required/Optional Property

•

8300-Inspections by Unit Number

•

8467-Schedule Related Inspections

•

8501-Display Desired Date Field

•

BATCH_JOB_SERVICE_CATEGORY

•

CREATE_NEW_INSPECTION_WHEN_RESCHEDULE

•

INSPECTION_SETTING

Assigning and Auto-Assigning Inspections
Set the following FIDs:
•

8147-Inspection Assignments

•

8287-Auto-Assign Inspection

•

8281-Inspector Districting

Set the following Standard Choices:
•

GIS_BUFFER_DISTANCE

•

ACA_AUTO_ASSIGN_INSPECTOR

•

INSPECTOR_AUTO_ASSIGN_CRITERIA

Entering Guidesheet Items
Set the following FIDs:
•

8343-Copy Guide Sheet

•

8344-Carrying Over Failed Guide Sheet Items

•

8149-Inspection Guide Sheet

•

8315-Copy Inspection and Guide Sheet

Resulting Inspections
Set the following FIDs and Standard Choices:
•

8145-Inspection Results

| FIDs and Standard Choices Cross Reference | 102

•

8085-Inspection Email Notification

•

8462-Time Accounting on inspections

•

8144-Inspection Results Supervisor

•

INSPECTION_SETTING

Planning Inspection Route Sheets
To enable and configure the Inspection Route Sheet feature, set the following FIDs:
•

8146-Inspection Route Sheet

•

8187-Inspection GIS Route Optimization

•

8300-Inspections by Unit Number

To enable optimized inspection routing such as routing inspections by driving, walking, or public transit,
define the following FIDs and Standard Choices:
•

8496-Optimize Inspection Route

•

INSPECTION_SETTING

•

INSPECTION_ROUTE_TYPE

•

ROUTE_OPTIMIZER_PROVIDER

•

BATCH_JOB_SERVICE_CATEGORY

Viewing Inspection Audit Logs
Set the following FIDs:
•

8442-Inspection History Audit Log

•

8469-Inspections Detail Guide Sheet Audit Log

Accessing Inspection Documents
Set the following FIDs:
•

8212-Upload EDMS Attachment

•

8213-Download EDMS Attachment

•

8214-View EDMS Attachment List

•

8240-Delete EDMS Attachment

•

8473-EDMS Document URL Link

Configuring the GIS Button on the Inspection List Portlet
Set the following FID to define the display of the GIS button on the Inspection list portlet.

| FIDs and Standard Choices Cross Reference | 103

•

8495-Show Inspection Submitted Location

Enabling External Inspectors to Work with Inspections
Set the following Standard Choice and FID if your agency has contract inspectors or self-certified
inspectors complete inspections on behalf of your agency:
•

INSPECTION_RESULT_CSV_FORMAT

•

8497-Result Inspections by CSV

Asset Management
Related Links
Configuring Assets
Configuring Part Inventory
Configuring Work Orders
Configuring Asset Condition Assessments
Configuring PM Schedules

Configuring Assets
Topics
•

Asset Administration

•

Managing Assets

•

Managing Associations with Assets

•

Creating Work Orders from Assets

•

Configuring Asset Group Update

Asset Administration
Set the FIDs and Standard Choices for administrators to configure asset types and asset groups.
Administrators can configure assets for users to access in all of the Accela solution modules.
Table 54: FIDs and Standard Choices for Asset Administration
Asset Administration

Required FIDs and Standard Choices

Asset Attributes

0158-Admin Attribute Definition, 0159-Admin Attribute Template Definition,
0269-Admin Attribute Form Layout Editor, 0305-Admin Attribute Table
Definition

Asset Types

0160-Admin AMS Asset Definition, 0182-Admin GIS Attribute Mapping, 0252Asset Type Available CAP Type, 0253-Asset GIS Synchronize, 0255-Manage
Asset Type Security, 0274-Rating Type

Asset Groups

ASSET_GROUP

| FIDs and Standard Choices Cross Reference | 104

Asset Administration

Required FIDs and Standard Choices

Asset Usage Types

0326-Define Asset Usage Unit Type, ASSET_USAGE_UNIT_TYPE

Asset Size Units

ASSET_SIZE_UNIT

Managing Assets
Set the following FIDs for users to add and manage assets:
•

8189-Asset Data Management

•

8290-Calculate Asset Depreciation

•

8312-Asset Clone

•

8346-Parent Asset Dependency Flag

Managing Associations with Assets
Civic Platform includes associations between assets with different records, information or objects (such as
documents, addresses, conditions, and so forth).
Set the FIDs for users to manage the association between assets and different record types:
Table 55: FIDs for Association with Assets
Record Type

Required FIDs for Association with Assets

Addresses

8201-Daily Asset Location

Condition

8282-Asset Condition

Condition Assessment

8308-Asset Condition Assessment Management

Contacts

8031-Contacts

Documents

8294-Asset Document Look up

Parts

8402-Asset Associated Part

PM Schedules

8262-Daily-Asset PM Schedule List

Ratings

8399-Asset Rating

Usage

8277-Asset Usage Tracking

Creating Work Orders from Assets
Set the following FID:
•

8331-Create WO From Asset List

Configuring Asset Group Update
You can enable updating of multiple assets, in the same asset group, with the same information.
Set the following FID:
•

8412-Asset Group Update

| FIDs and Standard Choices Cross Reference | 105

Configuring Part Inventory
Topics
•

Part Administration

•

Managing Part Inventory

•

Managing Part Transactions

•

Managing Associations with Parts

Part Administration
Set the following FIDs for administrators to configure part item locations, vendors and manufacturers:
•

0213-Admin AMS Parts Item Location

•

0214-Admin AMS Parts Vendors and Manufacturers

Managing Part Inventory
Set the following FIDs and Standard Choices for users to add and manage parts:
•

8273-Parts Inventory

•

PARTS_ALLOW_NEGATIVE_QUANTITY

Managing Part Transactions
Set the following FIDs for users to manage part transactions:
•

8447-Part Transaction-Receive

•

8448-Part Transaction-Transfer

•

8449-Part Transaction-Adjust

•

8450-Part Transaction-Reserve

•

8451-Part Transaction-Void

•

8274-Part Transaction-Issue

•

8275-Parts Supply

Managing Associations with Parts
Set the following FIDs:
•

8402-Asset Associated Part

•

8276-Parts Contact

| FIDs and Standard Choices Cross Reference | 106

Configuring Work Orders
Topics
•

Work Order Administration

•

Creating Work Orders and Records

•

Managing Associations with Work Orders

•

Managing Work Order Tasks

•

Accessing Work Order Assignments and Costs

•

Configuring Work Order Production Tracking

Work Order Administration
Set the FIDs and Standard Choices for administrators to configure work order types, groups and costs.
Table 56: FIDs and Standard Choices for Work Order Administration
Work Order Administration

Required FIDs and Standard Choices

Work Order Cost Items and Cost
Groups

0161-Admin Work Order Costing Item Definition, 0170-Admin-WO Template
Costing, 0330-Admin Work Order Costing Group Definition

Work Order Templates

0169-Admin-Work Order Template, 0173-WO Template Part

Work Order Tasks

0254-WO Task Definition

Work Order Types

0306-Work Order Type

Creating Work Orders and Records
Set the following FIDs for users to create work orders:
•

8279-New Mechanism to Create Work Order

•

8331-Create WO From Asset List

Managing Associations with Work Orders
Set the following FIDs:
•

8192-Work Order Parts

•

8203-Daily Record Asset

•

8280-Linking Work Order to PM Schedule

Managing Work Order Tasks
You can configure Civic Platform to allow users to manage work order information associated with tasks.
Set the following FIDs and Standard Choices:
•

8338-WO Task tab on Work Order

•

8339-Maintenance WO Task on Work Order

| FIDs and Standard Choices Cross Reference | 107

•

WO_TASK_DURATION_UNIT

•

WO_CLOSE_CHECK_TASK

Accessing Work Order Assignments and Costs
Set the following FIDs to manage the assignments and costs in work orders, or distribute the costs:
•

8191-Work Order Costing

•

8418-Work Order Cost Distribution

•

8461-Show Work Order Cost Information

•

8466-Daily Work Order Costing Group Definition

•

8484-Cost Item Permission (see “Managing Cost Item Permissions” in the Civic Platform Administrator
Guide)

Configuring Work Order Production Tracking
Civic Platform provides a way for your agency to track Work Order Production information. This feature
allows an agency to anticipate realistic expectations for a work crew with realistic estimated costs for
completion. After you enter the actual work order cost, Civic Platform compares the actual data against
a defined estimated standard. As a result, you can compare the costs and crew performance for a Work
Order on an equal basis to the costs and crew performance from a different Work Order. The agency can
review this information to solve problem, and make a budget, or make a plan.
Set the following FIDs and Standard Choices:
•

8336-Recalculate Production Units

•

8337-Production History

•

PRODUCTION_UNIT_TYPE

Configuring Asset Condition Assessments
Topics
•

Asset Condition Assessment Administration

•

Managing Condition Assessments

•

Managing Associations with Condition Assessments

Asset Condition Assessment Administration
Set the following FIDs for administrators to configure asset condition assessment types:
•

0227-Condition Assessment

•

0274-Rating Type

Managing Condition Assessments
Set the following FIDs for users to add and manage asset condition assessments:

| FIDs and Standard Choices Cross Reference | 108

•

8308-Asset Condition Assessment Management

Managing Associations with Condition Assessments
Set the following FIDs:
•

8310-Asset Condition Assessment Linked Work Order

•

8309-Asset Condition Assessment Observation

•

8399-Asset Rating

Configuring PM Schedules
Topics
•

Managing PM Schedules

•

Generating Work Orders by PM Schedules

•

Viewing PM Schedules Log

Managing PM Schedules
Set the following FIDs for users to manage PM Schedules:
•

0195-Admin-PM Schedule

•

0196-Admin-PM Schedule Linked Quick Query

•

0197-Admin-PM Schedule Linked Asset

•

0198-Admin-PM Schedule Skipped Asset

•

0199-Admin-PM Schedule Hold Event

Generating Work Orders by PM Schedules
Set the following FID:
•

0201-Admin-Generating Work Orders By PM Schedule

Viewing PM Schedules Log
Set the following FID:
•

8278-PM Schedule Log

License and Case Management
Related Links
Configuring License Renewal

| FIDs and Standard Choices Cross Reference | 109

Configuring Expired Licenses and Insurance Coverage Verification
Configuring Licensed Professional Providers
Configuring Education
Accessing Continuing Education Records
Accessing Examination Records

Configuring License Renewal
Set the following FID:
•

8398-Cap Renewal

Configuring Expired Licenses and Insurance Coverage Verification
Topics
•

Associating Expired License Types with Record Types

•

Configuring Expired License Notifications

•

Accessing Education Records

Associating Expired License Types with Record Types
Set the following FID:
•

0320-Admin License Verification

Configuring Expired License Notifications
Set the following Standard Choice:
•

ENABLE_EXPIRED_LICENSE

•

BATCH_JOB_SERVICE_CATEGORY. Use Send License Expired Email value.

If your agency implements Citizen Access and you want to display online notifications to public users
logging in with an expired license or insurance, you must define additional Standard Choices Values for
Standard Choice ENABLE_EXPIRED_LICENSE.
For configuration details, refer to the “License Verification and Online Renewals” chapter in the Citizen
Access Administrator Guide.

Configuring Licensed Professional Providers
You can configure Civic Platform to display the Provider option in the Licensed Professional drop-down list.
Note:
Civic Platform treats Education Providers as a specific type of Licensed Professional.

Set the following Standard Choice:
•

LICENSED PROFESSIONAL TYPE

| FIDs and Standard Choices Cross Reference | 110

Configuring Education
Topics
•

Accessing Education Records

•

Configuring the Education Degree Drop-down List

Accessing Education Records
Set the following FIDs:
•

0310-Admin Education Info

•

8420-Daily Education Info

•

8421-Daily Delete Required Education

Configuring the Education Degree Drop-down List
Set the following Standard Choice:
•

EDUCATION_DEGREE

Accessing Continuing Education Records
Set the following FIDs:
•

0311-Admin Continuing Education Info

•

8428-Daily Continuing Education Info

•

8429-Daily Delete Required Continuing Education

Accessing Examination Records
Set the following FIDs:
•

0312-Admin Examination Info

•

8430-Daily Examination Info

•

8431-Daily Delete Required Examination

If you plan to use the Examination score upload functionality through Citizen Access, you also need to
configure the related Standard Choice defining the Examination score CSV upload file parameters, and
provide this information to the Examination Providers. For more information on Examination score upload
requirements, refer to the “Certifications and Education” chapter in the Citizen Access Administrator Guide.

Configuring Reasons of Rescheduling or Cancelling Examination
Set the following Standard Choice:
•

REASON_FOR_RESCHEDULING_CANCELLING_EXAMINATION

| FIDs and Standard Choices Cross Reference | 111

Citizen Access Administration
This chapter lists all the Standard Choices specific to Citizen Access administration. For more information,
see Standard Choices Reference.
•

ACA_AGENCY_EMAIL_REGISTRATION_TO

•

ACA_AUTO_ASSIGN_INSPECTOR

•

ACA_CONDITION_AGENCY_USER

•

ACA_CONFIGS

•

ACA_CONFIGS_LINKS

•

ACA_CONFIGS_TABS

•

ACA_CONNECT_LICENSE_AUTO_APPROVED

•

ACA_EMAIL_REGISTRATION_TO

•

ACA_EMAIL_REGISTRATION_FROM

•

ACA_FILTER_CAP_BY_LICENSE

•

ACA_PAGE_PICKER

•

ACA_SPELL_CHECKER_ENABLED

•

AGENCY_EMAIL_REGISTRATION_TO

•

AUTHORIZED_SERVICE

•

DEFAULT_JOB_VALUE

•

DISPLAY_INSPECTION_COMMENT_IN_ACA

•

E-MAIL_PAYMENT_NOTICE_DISABLE

•

ENABLE_ANONYMOUS_REPORT

•

ENABLE_AUTO_POPULATE_PARCEL_OWNER

•

FIND APP DATE RANGE

•

FOOD_FACILITY_INSPECTION

•

ONLINE_PAYMENT_MAX_AMOUNT

•

PAYMENT_GROUP

•

REMOVE_PAY_FEE

•

REPRINT_REASONS

•

STATES

•

UNIT TYPES

| FIDs and Standard Choices Cross Reference | 112

•

WORKFLOW_CONFIGS

Internationalization and Localization
Topics
•

Enabling Internationalization and Localization

•

Supporting I18N Addresses Fields

•

Configuring Phone Number Country Codes

•

Setting ASI Fields to Right Justification

•

Setting Report Language Preferences

Enabling Internationalization and Localization
Set the following two Standard Choices to enable the internationalization and localization feature:
•

I18N_ADDRESS_FORMAT

•

I18N_SETTINGS

Supporting I18N Addresses Fields
You must enable and configure the following Standard Choices for displaying the Country, Gender and
Salutation fields:
•

COUNTRY

•

GENDER

•

SALUTATION

Configuring Phone Number Country Codes
As a system administrator, you can expand phone number fields to accommodate international phone and
fax numbers in Civic Platform and Citizen Access. You must enable the following Standard Choices:
•

PHONE_NUMBER_IDD

•

PHONE_NUMBER_IDD_ENABLESALUTATION

Setting ASI Fields to Right Justification
Set the following Standard Choice to allow data in application‑specific information fields to be entered and
displayed from right-to-left for agencies whose primary language is Arabic.
•

ASI_ALIGNMENT_OPTIONS

Setting Report Language Preferences
Set the following Standard Choice to enable reports to accommodate different languages:

| FIDs and Standard Choices Cross Reference | 113

•

REPORT_CRITERIA_LANGUAGE

| Standard Choices Reference | 114

Standard Choices Reference
This section includes descriptions and acceptable values of common Standard Choices. This section does
not include all Standard Choices.
For each Standard Choice, the reference provides the following sections:
Product. The product(s) that can apply the Standard Choice.
Type. You must select the correct type for a Standard Choice. Possible types are: System Switch, Shared
drop-down, EMSE, Business Configuration.
Description. Provides an explanation of the operations associated with the Standard Choice.

DOCUMENT_REVIEW_STATUS (User-defined Name)
Product
Civic Platform
Type
Business Configuration - Document Review Status
Description
You can add one or more Standard Choices of the Business Configuration - Document Review Status
type, each with a unique Standard Choice name. The Standard Choice names are the document review
status group names.
To configure document review statuses in a document review status group, add Standard Choice Values in
the Standard Choice of the group. Each Standard Choice Value represents a document review status.
The value description of a Standard Choice Value (document review status) can be either empty (default)
or “Validation Required”. If you set a document review status as “Validation Required”, when users update
a document review task to the status, Civic Platform validates whether all the required checklist items
related with the task are complete (that is, their statuses must be of the Approved result type).

DOCUMENT_STATUS (User-defined Name)
Product
Civic Platform
Type
Business Configuration - Document Status
Description
This Standard Choice defines a document status group.
You can specify a unique document status group name in the Standard Choice name. Each document
status group can have several values, each value representing a document status. You can create multiple
document status groups for different types of documents, and associate the document status groups with
the corresponding document types.

| Standard Choices Reference | 115

EDMS_FUNCTION (User-defined Name)
Product
Mobile Office
Type
Business Configuration - URL Links on AMO
Description
This Standard Choice defines the Electronic Document Management System (EDMS) functions that
users can perform against a document in Mobile Office, such as viewing the history of the document and
checking out the document from the EDMS. You can specify a unique name in the Standard Choice name.
See Figure 5: Standard Choice Example as an example.

Figure 5: Standard Choice Example
Standard Choice values can include:
{EDMS function name.}
The value defines the name of the EDMS function, which appears in the Actions drop-down menu next to
each downloaded or submitted document in Mobile Office.
Value Description:
EDMS=;URL=$parameter$&$parameter$
The value description defines the source of the EDMS web service and the parameters whose values the
system captures in runtime and passed to the EDMS web service. Make sure that the EDMS vendor name
is exactly the same as one of the Standard Choice values you define in the Standard Choice EDMS. And
append any of these parameters surrounded by the "$" sign to the end of the URL. For a list of supported
parameters, see Table 57: Supported Parameters for EDMS Functions.
Table 57: Supported Parameters for EDMS Functions
Parameter

Description

$DocumentId$

Document ID or File Key

$AltID$

Alternate Record ID

$UserID$

User ID

$UserFullName$

User’s full name

$SPCode$

Agency name

$Today$

Current date

$LanguageId$

Login language abbreviation, e.g., EN-US

| Standard Choices Reference | 116

State/Province (User-defined Name)
Product
Civic Platform, Citizen Access
Type
Business Configuration - State/Province
Description
This Standard Choice defines a list of states or provinces that can be available for selection in the State (or
Province) drop-down list across Civic Platform and Citizen Access.
You can specify a unique name as the Standard Choice name (the name of the State list). The Standard
Choice name appears as an option of the State/Province drop-down list in the Regional Settings portlet.
The administrator can relate the State list to a country or region in the Regional Settings portlet. When the
user selects that country or region in a form like the Contact Address intake form, Civic Platform populates
the corresponding states from the specified State list in the State (or Province) drop-down list. See Figure
6: Define the State List for the United States for an illustrative example.

Figure 6: Define the State List for the United States
Standard Choice values can include:
{Enter the names of the states or provinces.}
AK
CA
SD
Value Descriptions:
{Enter description of the state or province.}
Alaska {for the Standard Choice value “AK”}

| Standard Choices Reference | 117

California {for the Standard Choice value “CA”}
South Dakota {for the Standard Choice value “SD”}

VIRTUAL FOLDERS (User-defined Name)
Product
Civic Platform
Type
Business Configuration - Virtual Folder
Description
This Standard Choice defines a virtual folder group.
You can specify a unique virtual folder group name as the Standard Choice name. Each virtual folder
group can have several values, each value representing a virtual folder. You can create multiple virtual
folder groups, that correspond to different record types, and you can associate the appropriate virtual folder
group to its corresponding record type.

AA_EDMS_DISALLOWED_FILE_TYPES
Product
Civic Platform, Mobile Office, and Accela Wireless
Note:
ACA_EDMS_DISALLOWED_FILE_TYPES in the Standard Choice ACA_CONFIGS specifies disallowed file
extensions for Citizen Access.

Type
System Switch
Description
This Standard Choice specifies the disallowed file extensions for uploading to EDMS.
Table 58: AA_EDMS_DISALLOWED_FILE_TYPES Standard Choice Values
Standard Choice Values

Value Description

Description

AA_EDMS_DISALLOWED_
FILE_TYPES

Enter a list of file extensions. For
The value lists all the disallowed file
example: .html; .htm; .mht; .mhtml. extensions, separated by semicolons to
separate the file extensions. Do not insert a
space before or after the semicolon. If you do
not specify an extension, the system allows
all file types.

ACA_AGENCY_EMAIL_REGISTRATION_TO
Product
Citizen Access
Type
System Switch

| Standard Choices Reference | 118

Description
This Standard Choice enables the feature that sends an “activation required email” to an agency
employee. The email is a notification that the public user does not meet the basic requirements for
automatic activation.
Note:
Pay attention to the difference between this Standard Choice and AGENCY_EMAIL_REGISTRATION_TO.

ACA_AUTO_ASSIGN_INSPECTOR
Product
Citizen Access, IVR
Type
System Switch
Description
This Standard Choice defines the criteria for auto-assigning inspections in Citizen Access and IVR.
Configure this Standard Choice to prevent inspections from being auto-assigned if no inspector is available
with the appropriate discipline or in the appropriate district.
You must clear the cache in Citizen Access after you configure this Standard Choice.
Table 59: ACA_AUTO_ASSIGN_INSPECTOR Standard Choice Values
Standard Choice Values

Value

Description

BLOCK_SCHEDULE_
WHEN_NO_INSPECTOR_
FOUND

Y/N

Yes. When you set this Standard Choice value to Y (Yes), Citizen
Access prevents users from scheduling inspections when an
appropriate inspector is not available by blocking the times on the
calendar. IVR prevents users from scheduling inspections and notifies
the user that an appropriate inspector is not available.
No. When you set this Standard Choice value to N (No), Citizen
Access and IVR allow users to schedule inspections when an
appropriate inspector is not available, but leaves the inspector field
blank. A supervisor can then choose an inspector, based on the
supervisor’s discretion.

ACA_CACHE_CONFIG
Product
Citizen Access
Type
System Switch
Description
This Standard Choice enables the ability to move global data, including labels and system settings into
cache in a .NET layer to provide the ability to share this data and improve performance when multiple
users access the data.
You can specify the cached object in the Standard Choice value, and then define the time when the
cached object expires and is removed from the cache. The time unit is second.
The cached object can be labels, server constant, SmartChoice group, Standard Choice, and template.

| Standard Choices Reference | 119

Table 60: ACA_CACHE_CONFIG Standard Choice Values
Standard Choice Values

Value Description

Description

LABELS

ExpirationTime;Description. For
example: 1800;label description.

SERVER_CONSTANT

ExpirationTime;Description. For
example: 1800;server constant
description.

The value description defines the time at
which the cached object expires and is
removed from the cache. The time unit is
second.Optionally, you can provide the
description about each cached object.

SMART_CHOICE_ GROUP

ExpirationTime;Description. For
example: 1800;smart choice
description.

STANDARD_CHOICE

ExpirationTime;Description. For
example: 1800;Standard Choice
description.

TEMPLATE

ExpirationTime;Description.
For example: 1800;template
description.

ACA_CONDITION_AGENCY_USER
Product
Citizen Access
Type
System Switch
Description
This Standard Choice provides the ability to assign conditions to records by EMSE when public users
create records.
Enter a valid department name in the Standard Choices Value field. If an EMSE script assigns a condition
to a record created in Citizen Access, the script must read the Standard Choice value and set the
department name for the public user first.

ACA_CONFIGS
Product
Citizen Access
Type
System Switch
Description
This Standard Choice controls most Citizen Access features.
Table 61: ACA_CONFIGS Standard Choice Values
Standard Choice Values

Value Description

Description

ACA_DEFAULT_
CASHIER_ID

Enter a cashier ID.

Citizen Access assigns the cashier ID to all public users that
do not have a Cashier ID in their user profile, and uses the
Cashier ID to generate a unique receipt for each payment
made by the user.

| Standard Choices Reference | 120

Standard Choice Values

Value Description

ACA_DEFAULT_
COUNTRY

Enter a full country
GIS uses the country to locate an address on Bing Maps if the
name. Default: United public users do not provide a country name with the address
States.
they want to locate.

ACA_EDMS_
DISALLOWED_FILE_
TYPES

Enter a list of file
The list of file extensions include all the disallowed file types
extensions, each
when public users upload files to Citizen Access. If the value
separated by
description is empty or not defined, public users can upload all
semicolon, with
files types.
no space between
the semicolon
and the extension
before or after it. For
example: .html;.htm;mht;mhtml.

ACA_SITE

Enter the URL of the This value specifies the login URL of your Citizen Access site.
Citizen Access Setup.
For example, http://
$acaserver$/$acasite
$/Admin/Login.aspx.

ACA_TERMINAL_ID

Enter the ID name
or number that
identifies the terminal
assigned to the
ACA default cashier
(ACA_DEFAULT_
CASHIER_ID) to
accept payments.

Citizen Access uses this value with ACA_WORKSTATION_ID
to generate a unique receipt for each payment made by public
users.

ACA_WORKSTATION_ID

Enter the workstation
assigned to the
ACA default cashier
(ACA_DEFAULT_
CASHIER_ID) to
accept payments.

Citizen Access uses this value with ACA_TERMINAL_ID to
generate a unique receipt for each payment made by public
users.

ALL_USER_SCHEDULE_
INSPECTION_ENABLED

Yes, No

This value provides the types of users that can schedule
inspections.

ASI_LABEL_WIDTH

NO_ANONYMOUS_
USER

Enter a numeric
value. Default: 25.

Description

Yes enables ALL users, including anonymous users, to
schedule an inspection.
No only allows owners or licensed professionals for the
permit to schedule an inspection.
NO_ANONYMOUS_USER allows any registered user,
citizen or licensed professional, to schedule an inspection.
The numeric value controls the number of characters that
display per line on an ASI field label. This is particularly useful
to control label width for the alternative ASI labels that you
choose to use for Citizen Access, to accommodate the ability
to ask questions during the application intake process.

AUTO_POPULATE_ STATE Yes, No

Yes displays the licensing state as the default value in the
State drop-down list when a user is registering for an account;
No displays an empty (-Select-) value.

CONTINUE_SHOPPING_
ENABLE

Yes, No

Yes displays the Continue Shopping button on the Pay Fees
page in the application intake form; No hides the button.

CREATE_APPLICATION_
MODEL

2, any other value

This value controls whether public users handle payments on
the Review Information page or on the Pay Fees page.
If the value description is 2, Citizen Access triggers the EMSE
event ApplicationSubmitAfter when the Review Information
page loads, and public users handle payment on the page.

| Standard Choices Reference | 121

Standard Choice Values

Value Description

Description
If the value description is any other value, Citizen Access
triggers the EMSE event ApplicationSubmitAfter after public
users click the Continue Application button on the Review
Information page and before the Pay Fees page loads. Public
users handle payment on the Pay Fees page.

DEFAULT_CONTACT_
ADDRESS_TYPE

Enter a contact
address type.

This value defines the default contact address type for all the
Contact Address sections in the Citizen Access website.

DEFER_PAYMENT_
ENABLED

Yes, No

Yes displays the Defer Payment button on the payment page
(which may be Review Information or Pay Fees page. See
CREATE_APPLICATION_ MODEL); No hides the button.

DESCRIPTION_
REQUIRED_FLAG

Yes, No

Yes flags the General Description and Detailed Description
fields as required; No removes the required flag on the
General Description and Detailed Description fields.

DISPLAY_OPTIONAL_
INSPECTIONS

Yes, No

Yes displays the optional inspections; No hides the optional
inspections.

DISPLAY_OWNER_
INFORMATION

Yes, Y

This value allows you to hide owner searches and owner
information from Citizen Access. Yes or Y enables owner
searches and displays owner information.No or N disables
public users to do any of the following:

No, N

•

Perform owner searches on the Look Up Property
Information page, the GIS Search panel, or the Owner
section of an application intake form.
Note: The Data Source property for the Owner
component in a page flow also determines
whether public users can perform owner searches
on an application intake form. This Standard
Choice setting selectively overrides the Data
Source property setting. When this Standard
Choice value is set to No but the Data Source
property is set to “Reference” or “No Limitation”,
the Owner section of the application intake form
allows public users to add an owner manually but
does not display a Search button.

•

Access owner information associated with property from
various places such as:
•

The Global Search results

•

The Parcel Detail, Record Detail, Trust Account Detail,
or Enter Work Location page

•

An expanded address, parcel, or record in the GIS
Search result panel or the GIS Contents panel

•

The window popped up after public users perform the
Show Record map command against a GIS object.
Note: The Record Detail Section Configuration
on the Module Settings page also determines
which public user roles can access owner
information on the Record Detail page. This
setting overrides the Standard Choice setting.
For example, if the module settings enable only
record creators to access the Owner section of
the Record Detail page but this Standard Choice
value is set to No, only the record creator can
access owner information from the Record Detail

| Standard Choices Reference | 122

Standard Choice Values

Value Description

Description
page for his or her records. All the other public
users have no access to that owner information.
•

Copy the owner information from the Record Detail page
to a new record, if public users cannot access the Owner
section of the Record Detail page.

•

Search for and select an address or a parcel to fill in an
application intake form and make the Owner section autopopulated with the owner associated with the address or
the parcel.
Note:
Accela recommends that you manually clear cache
data through the GIS Administration site after you
change this Standard Choice value. So the change
can immediately take affect in the map opened from
Citizen Access. Otherwise, the change does not take
effect until the GIS Administration site automatically
clears the cache every hour.

DISPLAY_QUICK_QUERY

Yes, No. Default
value is No.

This value defines whether the quickquery dropdown list
shows or hides in the My Permit List section on the module
Record Home pages.
Yes displays the quickquery dropdown list if at least
one quickquery for the ACA My Permit List portlet is
assigned to the current module in the Global QuickQueries
administration portlet.
No always hides the quickquery dropdown list.

DISPLAY_REQUEST_
TRADE_LICENSE_ FILTER

Yes, Y
No, N

This value allows public users to quickly access the trade
license request page from the record page.
Yes or Y displays the “Request a Trade License” option
in the Application Status section on the Module Settings
page. If you mark the option of a specific application
status, when the application reaches the status, the record
page displays the “Trade License/Initial Approval” link
under the Action column. The link provides a quick access
to trade license request page for public users.
No or N hides the “Request a Trade License” option from
the Application Status section on the Module Settings
page.

ENABLE_AUTO_ INVOICE

Yes, No
Default value is Yes.

ENABLE_BROWSER_
DETECT

Yes, No
Default value is No.

If you do not add the module of the application in the
Standard Choice AUTO_INVOICE_MODULE, and set
ENABLE_AUTO_INVOICE to No, public users only need to
pay the fee items with Auto Invoice as Y. For the fee items
with Auto Invoice as N, users must go to Civic Platform to
view, invoice or pay.In other configuration scenarios, public
users must pay all the fee items regardless of the Auto Invoice
setting.
This value defines whether or not public users can see the
unsupported browser warning when they first log in to Citizen
Access with an unsupported browser or browser version.
Yes turns on the unsupported browser warning.
No turns off the unsupported browser warning.

ENABLE_
CUSTOMIZATION_
PER_PAGE

Yes, No

Only when the value description is Yes, administrators can
apply customized CSS style sheet or JavaScript file for a page
in the Citizen Access website. By default, the Standard Choice
Value is No.

| Standard Choices Reference | 123

Standard Choice Values

Value Description

Description

ENABLE_EXPAND_IN_
REVIEW_PAGE

Yes, Y

This value controls whether administrators can configure the
default view of the sections on the Review Information page.

No, N

Yes enables the Expanded property of the sections
(excluding the Record Type section) on the page.
Administrators can set the property to True or False
(default value).
Nodisables the Expanded property.
ENABLE_LDAP_
AUTHENTICATION

Yes, No

This value controls whether Citizen Access applies LDAP
authentication. Yes enables LDAP authentication and hides
the password-related fields on the Login Information section:
Password, Type Password Again, Select a Security Question,
and Answer.

GIS_PORTLET_URL

Enter the URL for the
GIS server.

This value allows public users to access the GIS viewer.

HIDE_CONTACT_
GENERIC_TEMPLATE_
FOR_CITIZEN_
REGISTRATION

Yes, No. Default
value is No.

This value defines whether the Contact Information section
in the registration displays the contact generic template fields
(including ASI fields and ASI table) that are associated with
the contact type that the public user selected.
Yes hides the contact generic template fields.
No hides the contact generic template fields.

INSPECTION_
CALENDAR_NAME

Enter an inspection
calendar name. For
example, to use
the Civic Platform
Inspection Blockout
calendar, enter
Inspection Blockout.

LOGIN_ENABLED

Yes, No

NEW_GIS_PORTLET_ URL

Enter the URL to the
7.3.3 AGIS server,
for example: http://
agis2.accela.com/
agis/.

To enable the GIS map integration with the new ACA UX
template available in 7.3.3, configure this Standard Choice.

NO_SAVEANDRESUME
LATER_ BUTTON_
MODULE

Enter a module
name.

This value provides the ability to hide the “Save and Resume”
buttons by module.

PA_EMAIL_ VERIFICATION Yes, No

Citizen Access uses the calendar for scheduling inspections.

Yes displays the Login link on the Home page.
No removes it.

Yes enables and sends the activation e-mail to the public
user.
No disables it.

REGISTRATION_
ENABLED

Yes, No

Yes displays the Register for an Account link on the Home
page. No removes it. Yes is the default.

V360_WEB_ACTION_
USERNAME

Enter a username
from the designated
universal user profile
for reporting.

V360_WEB_ACTION_USERNAME and
V360_WEB_ACTION_PASSWORD link a universal user
profile with reporting permissions to Citizen Access, and
enable a citizen to successfully run reports.

V360_WEB_ACTION_
PASSWORD

Enter the password
from the designated
universal user profile
for reporting.

| Standard Choices Reference | 124

ACA_CONFIGS_LINKS
Product
Citizen Access
Type
System Switch
Description
This Standard Choice configures the links that appear in the following two places:
•

In the block sections at the bottom of the welcome pages (Welcome Global and Welcome Registered)

Note:
Whether a block section displays relies on the blockvisible value of the corresponding Standard Choice
Value in ACA_CONFIGS_TABS. If a block section hides, all the links in the block section hide no matter
how you configure ACA_CONFIGS_LINKS.

•

Below the module tab bar.

Each Standard Choice Value defines a link and refers to a feature available in certain module or category.
You must add a Standard Choice Value in the pre-defined way to enable the corresponding link (for more
information, see Table 62: ACA_CONFIGS_LINKS Standard Choice Values). If you deactivate or remove a
Standard Choice Value, the corresponding link hides.
Note:
The enable and disable statuses of the Standard Choice Values are in synchronization with the General >
Feature Settings configuration for the corresponding features in ACA Admin.

| Standard Choices Reference | 125

Table 62: ACA_CONFIGS_LINKS Standard Choice Values
Module/Category

Feature/Link

Corresponding Standard Choice Value

General Information

Search for Certified Business

APO_CertifiedBusinessSearch

Search for a Provider/Education

APO_EducationSearch

Search for a Food Facility

APO_FoodFacilityInspectionSearch

Search for a License

APO_LicenseeSearch

Lookup Property Information

APO_SEARCH

Search Documents by Geographic
Location

APO_SearchDocument

Create an Application

Amendments_Apply

Create an Application by Selecting
Services

Amendments_ApplyByService

Obtain a Fee Estimate

Amendments_ObtainFeeEstimate

Schedule an Inspection

Amendments_ScheduleAnInspection

Search Applications

Amendments_Search

Create an Application (or Apply for a
License)

[Module]_Apply, for example, Building_Apply

Create an Application by Selecting
Services

[Module]_ApplyByService, for example,
Building_ApplyByService

Obtain a Fee Estimate

[Module]_ObtainFeeEstimate, for example,
Building_ObtainFeeEstimate

Schedule an Inspection

[Module]_ScheduleAnInspection, for example,
Building_ScheduleAnInspection

Search Applications (or Manage My
Licenses)

[Module]_Search, for example, Building_Search

Amendments

Any available module,
for example, Building,
Planning

The Value Desc field defines the page that each link (Standard Choice Value) directs to. Add the value
description in the following format:
label=[label key], order=[order number], role=[roles],
forcelogin=[forcelogin], url=[url], module=[module name]
Of the values:
•

label=[Type the system required label for the feature/link, as provided in Table 63: Feature Labels and
URLs in ACA_CONFIGS_LINKS]

•

order=[Enter the numeric order of display]. 0 is first.

•

role=[0, 1, or 0|1] Specify whether the tab displays on registered user pages (the Welcome Registered
page), anonymous user pages (the Welcome Global page) or both. Type 0 for Registered User pages
only, 1 for Anonymous Users pages only, or 0|1 for both registered and anonymous user pages.

•

forcelogin=[Enter yes or no.] The forcelogin value determines whether users need to log in before
accessing the associated link. If the value is yes, then users who have not already logged in are
prompted to do so. If the value is no, then anonymous users can access the link.

•

url=[Enter the URL for the feature/link, as provided in Table 63: Feature Labels and URLs in
ACA_CONFIGS_LINKS].
The Search Applications link directs to the module home page. You can add the following parameters in
the URL to further customize the module page that displays when users click the link:

| Standard Choices Reference | 126

•

•

$ShowMyPermitList$. If the parameter value is Y or undefined, the My Permit List section displays
on the module home page. If the parameter value is N, the section hides.

•

$SearchType$. This parameter defines the default search options of the Record Search section on
the module home page.
•

SearchType=NULL: The Record Search section applies the first search option as the default
search option.

•

SearchType=None: The Record Search section hides the whole search section.

•

SearchType=General: The Record Search section applies the general search as the default
search option.

•

SearchType=ByAddress: The Record Search section applies the Search by Address as the
default search option.

•

SearchType=ByLicense: The Record Search section applies the Search by License as the
default search option.

•

SearchType=ByPermit: The Record Search section applies the Search by Permit as the default
search option.

•

SearchType=ByTradeName: The Record Search section applies the Search by Trade Name as
the default search option.

•

SearchType=ByContact: The Record Search section applies the Search by Contact as the
default search option.

module=[Type The name of the module, such as Building or Planning.]

Table 64: Sample ACA_CONFIG_LINKS Configuration provides a few examples of ACA_CONFIG_LINKS
Values and their effects.
Table 63: Feature Labels and URLs in ACA_CONFIGS_LINKS
Feature/Link

Label

URL

Search for Certified Business

aca_home_label_
searchfor_certbusiness

url=/GeneralProperty/PropertyLookUp.aspx

Search for a Provider/
Education

aca_sys_education_ search_link url=/GeneralProperty/PropertyLookUp.aspx

Search for a Food Facility

aca_home_label_
searchfor_foodfacility

url=/GeneralProperty/PropertyLookUp.aspx?
isFoodFacility=Y

Search for a License

aca_sys_licensee_ search_link

url=/GeneralProperty/PropertyLookUp.aspx?
isLicensee=Y

Lookup Property Information

aca_sys_apo_search_link

url=/APO/APOLookup.aspx

Search Documents by
Geographic Location

aca_sys_apo_search_
document

url=/GeneralProperty/PropertyLookUp.aspx?
isSearchDocument=Y

Create an Application

aca_sys_feature_
apply_a_permit

url=/Cap/CapApplyDisclaimer.aspx

Create an Application by
Selecting Services

aca_sys_feature_apply_
a_permit_by_service

url=/Cap/CapApplyDisclaimer.aspx?
createRecordByService=yes

Obtain a Fee Estimate

aca_sys_feature_feeestimate

url=/Cap/UserLicenseList.aspx?
stepNumber=0&isFeeEstimator=Y

Schedule an Inspection

aca_sys_feature_schedule_
an_inspection

url=/Cap/CapHome.aspx?
IsToShowInspection=yes

| Standard Choices Reference | 127

Feature/Link

Label

URL

Search Applications

aca_sys_feature_ search_all

url=/Cap/CapHome.aspx

Table 64: Sample ACA_CONFIG_LINKS Configuration
Standard Choice Value

Value Description

Page Associated with the Value

APO_SEARCH

label=aca_sys_apo_search_
link, order=0, role=0|
1, forcelogin=no, url=/
APO/APOLookup.aspx,
module=building

Enables the Lookup Property Information
link in the General Information section on the
Welcome Registered page and below the General
Information tab bar.

BUILDING_SEARCH

label=aca_sys_feature_
search_ all,order=2,role=0|
1,forcelogin=NO,url=/
Cap/CapHome.aspx?
module=Building&
SearchType=ByAddress

Enables the Search Applications link in the
General Information section on the Welcome
Registered page and below the General
Information tab bar.
The module home page associated with the link
contains both the My Permit List section and the
General Search section, and the default search
option in the General Search section is Search by
Address.

ACA_CONFIGS_TABS
Product
Citizen Access
Type
System Switch
Description
This Standard Choice configures the visibility of tabs at the top of the home page and defines the page that
displays when users click a tab.
You can enter any text in a Standard Choice Value to represent a tab, for example:
Home
Building
APO
Licenses
ServiceRequest
The Value Desc field defines the page that each tab (Standard Choice Value) directs to. Add the value
description in the following format:
label=[info], order=[info], role={info], url=[info], module=[module name],
tabvisible=[info], blockvisible=[info].
Of the values:
•

Label determines the tab name.
•

To display the Home tab, set the label to aca_sys_default_home

•

To display the general information tab, set the label toaca_sys_apo_search]

•

To display a module tab, set the label to aca_sys_default_module_name. The label gets the tab
name from the module value in the value description.

| Standard Choices Reference | 128

•

order=[Enter the numeric order of display] 0 is first.

•

role=[0, 1, or 0|1] Specify whether the tab displays on registered user pages (the Welcome Registered
page), anonymous user pages (the Welcome Global page) or both. Type 0 for Registered User pages
only, 1 for Anonymous Users pages only, or 0|1 for both registered and anonymous user pages.

•

URL=[Provide the URL for the tab]
Which URL to enter depends on which feature you want to make available to users when they click
the tab. For the association between features and URLs, see Table 63: Feature Labels and URLs in
ACA_CONFIGS_LINKS.
If you assign the URL to the Search Applications feature which directs to the module home page, you
can add the following parameters in the URL to further customize the module page that displays when
users click the tab:
•

$ShowMyPermitList$. If the parameter value is Y or undefined, the My Permit List section displays
on the module home page. If the parameter value is N, the section hides.

•

$SearchType$. This parameter defines the default search options of the Record Search section on
the module home page.
•

SearchType=NULL: The Record Search section applies the first search option as the default
search option.

•

SearchType=None: The Record Search section hides the whole search section.

•

SearchType=General: The Record Search section applies the general search as the default
search option.

•

SearchType=ByAddress: The Record Search section applies the Search by Address as the
default search option.

•

SearchType=ByLicense: The Record Search section applies the Search by License as the
default search option.

•

SearchType=ByPermit: The Record Search section applies the Search by Permit as the default
search option.

•

SearchType=ByTradeName: The Record Search section applies the Search by Trade Name as
the default search option.

•

SearchType=ByContact: The Record Search section applies the Search by Contact as the
default search option.

•

module=[Provide the module name]

•

tabvisible=[Yes or No] Yes indicates the tab is visible at the top of the home page. No indicates there is
no tab at the top of the home page.

•

blockvisible=[Yes or No] Yes indicates you want the module features to be available in the block
sections at the bottom of the welcome pages. No indicates you want to hide the block section for the
module features.

Table 65: Sample ACA_CONFIG_TABS Configuration provides a few examples of ACA_CONFIG_TABs
values and their effects.

| Standard Choices Reference | 129

Table 65: Sample ACA_CONFIG_TABS Configuration
Standard Choice Value

Value Description

Page Associated with the Value

Building

label=aca_sys_default_ module
_name, order=1, role=0|1,
url=/Cap/CapHome.aspx?
ShowMyPermitList=Y&
SearchType=None,
module=Building, tabvisible=Yes

Enables the Building tab on both the Welcome
Global and Welcome Registered Pages. When
users click the tab, the building home page
displays the My Permit List section and hides the
General Search section.

Home

label=aca_sys_default_
home,order=0,role=0|1,url=/
Welcome.aspx, blockvisible=no

Enables the Home tab on both the Welcome
Global and Welcome Registered Pages, and hides
the Home block in the block sections at the bottom
of the welcome pages. When users click the tab,
the welcome page displays.

ACA_CONNECT_LICENSE_AUTO_APPROVED
Product
Citizen Access
Type
System Switch
Description
This Standard Choice controls whether Civic Platform automatically approves a license when a public
user associates the license with his account in Citizen Access. For example, if a public user associates
a license with his account from the Account Management page in Citizen Access, the License tab of
the Public User administration portal in Civic Platform displays the status of the associated license as
“Approved”.
Standard Choice value is either Y or N. Y enables license auto-approval. N disables license auto-approval,
so administrators need to manually approve the license through the License tab of the Public User
administration portal.

ACA_EMAIL_TO_AND_FROM_SETTING
Obsolete.

ACA_EMAIL_REGISTRATION_TO
Product
Citizen Access
Type
System Switch
Description
This Standard Choice provides the ability to designate the “CC” email address on the registration
confirmation emails which Civic Platform sends to users that register for an ACA account. Enter each email
address in a Standard Choices Value field to include it in the “CC” line of the registration email, so that the
email address can receive a copy.

| Standard Choices Reference | 130

Note:
Instead of configuring the Standard Choice, you can directly specify the To email addresses for the
ACA_MESSAGE_SENDPASSWORD template in the Notification Templates administration portlet.
This Standard Choice setting overrides the settings in the notification template.

ACA_EMAIL_REGISTRATION_FROM
Product
Citizen Access
Type
System Switch
Description
This Standard Choice provides the ability to designate the "From" email address from which Civic Platform
sends the registration confirmation email to users that register for an Citizen Access account.
Standard Choices value can only be one e-mail address. For example, support@cityofbridgeview.com.
Note:
Instead of configuring the Standard Choice, you can directly specify the From email addresses for the
ACA_MESSAGE_SENDPASSWORD template in the Notification Templates administration portlet.
This Standard Choice setting overrides the settings in the notification template.

ACA_FILTER_CAP_BY_LICENSE
Product
Citizen Access
Type
System Switch
Description
This Standard Choice provides a way to incorporate filters so that the licensed professional avoids
choosing inapplicable options online.
Table 66: ACA_FILTER_CAP_BY_LICENSE Standard Choice Values
Standard Choice Values

Value Description

Description

ENABLE_FILTER_BY_
REFTYPE_{Module}

YesNo

Yes enables filter record type by License type
for module; No disables it.

FILTER_BY_REFTYPE_
{Module}_{License type}

BUILDING/MECHANICAL
PERMIT/RESIDENTIAL/ALL
CATEGORIES,BUILDING/
BUILDING PERMIT//

This value matches specific license types
from a specific module with permit types. Use
comma to separate the permit types.

EXCLUDE_FROM_
FILTER_BY_REFTYPE_
{Module}

BUILDING/BUILDING
PERMIT/RESIDENTIAL/ALL
CATEGORIES,BUILDING/Elevator
Permit//, BUILDING/Well//

This value allows permit types to be excluded
from license validation when the filter is
enabled for the module. This means license
professionals can apply for the permit types
with or without a valid license. Use comma to
separate the permit types.

| Standard Choices Reference | 131

ACA_PAGE_PICKER
Product
Citizen Access
Type
System Switch
Description
This Standard Choice defines the pages in the page picker in Shopping Cart functionality, such as to
continue shopping.
Standard Choices values may include:
{Enter a number to identify the available ACA page pickers.}
1
2
3
Value Desc:
{Enter the ACA page name and its URL. For example, name=go to Building Disclaimer page,url=/Cap/Cap
ApplyDisclaimer.aspx?module=Building}

ACA_SECURITY_SETTING
Product
Citizen Access
Type
System Switch
Description
This Standard Choice controls whether Citizen Access validates the referer header in POST requests to
prevent cross-site request forgery.
Table 67: ACA_SECURITY_SETTINGS Standard Choice Values
Standard Choice Values

Value Description

Description

ENABLE_URL_REFERER
_CHECK

YesNo

If the Value Description is No or undefined, Citizen
Access does not validate the referer header in POST
requests.
If the Value Description is Yes, Citizen Access validates
the referer header.

TRUSTED_SITES

Enter third-party trusted
sites, separated by
semicolons.

The Value Description lists all the trusted sites whose
POST requests can pass the validation by Citizen
Access.

Note:
If you set ENABLE_URL_REFERER_CHECK to Yes, and the Citizen Access servers are load balanced, you
must add all the servers as trusted sites as well: Add the key TrustedSites into the web.config file and add
the server URLs (which can be either the IP URLs or domain URLs) in the key value. For example:
MB to the Value Description to determine the
maximum file size for Citizen Access. EDMS_VENDOR, EDMS_DOCUMENT_SIZE_MAX and
ACA_EDMS_DOCUMENT_SIZE_MAX are applicable to all EDMS systems.
Table 78: EDMS Standard Choice Values
Standard Choice Value

Value Description

ADS

For ADS, the Value Description must follow this convention:
EDMS_VENDOR=ADS;ADSSERVER_URL=;ADS_SERV_PROV_CODE=;
ADS_CLEARANCE_KEY=;
ADS_SECURITY_KEY=;
EDMS_DOCUMENT_SIZE_MAX=MB;ACA_EDMS_
DOCUMENT_SIZE_MAX=MB.
Example: EDMS_VENDOR=ADS;ADS_SERVER_URL=http://10.50.130.36/
DocumentService/index.cfm;ADS_SERVER_SECURITY_
KEY=BRIDGEVIEW1234;ADS_SERV_PROV_CODE=ADS720;ADS_
CLEARANCE_KEY=ZZVPNRUQDL49HJXUOEH93GPU37JD1S;
ADS_SECURITY_KEY=Z2BWZEIO9AB0YDR825VYH7GP9AG8HV;
EDMS_DOCUMENT_SIZE_MAX=16MB;ACA_EDMS_DOCUMENT_
SIZE_MAX=8MB

ACCELA

For ACCELA, the value description must follow this convention:
EDMS_VENDOR=ACCELA;EDMS_DOCUMENT_SIZE_MAX= MB;
ACA_EDMS_DOCUMENT_SIZE_MAX=MB.
Example: EDMS_VENDOR=ACCELA;EDMS_DOCUMENT_SIZE_MAX=16MB;
ACA_EDMS_DOCUMENT_SIZE_MAX=8MB

DOCUMENTUM

For DOCUMENTUM, the value description must follow this
convention: EDMS_VENDOR=STANDARD;URL=;EDMS_DOCUMENT_SIZE_MAX=MB; ACA_EDMS_
DOCUMENT_SIZE_MAX=MB
Example: EDMS_VENDOR=STANDARD;URL=http://slcimpl.accela.com:8888/
portlets/services/AccelaDocumentService;EDMS_DOCUMENT_
SIZE_MAX=16MB;ACA_EDMS_DOCUMENT_SIZE_MAX=8MB
Note:
Civic Platform has supported template fields (ASI fields and ASI
table fields) on a document since the 7.2.0 release. To enable
all template field functionality such as saving ASI fields to the
EDMS during report generation, set up a Standard EDMS with
the string “VERSION=7.2.0” appended to the end of the value
description. For example, EDMS_VENDOR=STANDARD;URL=http://
slcimpl.accela.com:8888/portlets/services/
AccelaDocumentService; EDMS_DOCUMENT_SIZE_MAX=16MB;
ACA_EDMS_DOCUMENT_SIZE_MAX=8MB;VERSION=7.2.0

EDUCATION_DEGREE
Product
Civic Platform, Citizen Access
Type
System Switch

| Standard Choices Reference | 179

Description
The Standard Choice defines the value options in the Education Degree drop-down list. Civic Platform
provides four values by default, Bachelor, Master, MBA, and PhD. You can change or modify these values
during configuration.
For example, if common degree requirements at your agency include a high school diploma, Masters of
Education (MEd), professional degrees (such as DDM or DDS for dentists), or JD for lawyers, you can add
these degrees to the list.
Standard Choice values can include:
Bachelor
Master
PhD
MBA

E-MAIL_PAYMENT_NOTICE_DISABLE
Product
Citizen Access
Type
System Switch
Description
Citizen Access sends a receipt when a public user completes a record and the fee payment for the record.
It also sends an email with instructions for the next step in a workflow. If there is no more step in the
workflow, the email is blank and should therefore not be sent. This Standard Choice disables that email.
{Each value must be one of the modules, spelled exactly as it appears in the module drop-down list in Civic
Platform.}

EMSE_Settings
Product
Civic Platform
Type
System Switch
Description
At the triggering of an event, the EMSE Message List window appears in the front of other windows so
that users can easily notice the event execution results. This Standard Choice enables administrators to
configure the length of period during which the window has the focus.
Table 79: EMSE_Settings Standard Choice Values
Standard Choice Values

Value Description

Description

AUTO_FOCUS_DELAY

Enter a numeric value. The unit of
the value is second.

The value defines the length of period (in
seconds) during which the EMSE Message
List window has the focus after it appears.
After the period, the focus changes to the
Civic Platform page where the event is
triggered.
If the Standard Choice is undefined, the focus
stays with the EMSE Message List window

| Standard Choices Reference | 180

Standard Choice Values

Value Description

Description
for 5 seconds before it goes to the previous
page.

ENABLE_ADD_MULTIPLE_CONDITIONS
Product
Civic Platform, Mobile Office
Type
System Switch
Description
If this Standard Choice value is Yes, users can add multiple conditions to a record or other object in one
submit process.
Standard Choice values can include:
Yes. Users can add multiple conditions to a record in one submit process.
No. Users can add only one condition to a record in one submit process.

ENABLE_AMO_ONLINE_REPORT
Product
Mobile Office
Type
System Switch
Description
This Standard Choice controls whether Mobile Office users can run online reports for inspections from the
Inspection list page, Inspection detail page, or the Job List page. Online reports refer to the reports that
administrators add in the Mobile Office Reports category in Report Manager. Mobile Office users run online
reports directly against the data in the Civic Platform database.
The Standard Choices values include:
Yes. Enables the Online Report button on the Inspection list page and Job List page, and the Create
Online Report button on the Inspection detail page.
No. Disables the Online Report and Create Online Report buttons.
If you change the Standard Choice setting, users must restart Mobile Office to make the change take
effect.

ENABLE_ANONYMOUS_REPORT
Product
Citizen Access
Type
System Switch
Description

| Standard Choices Reference | 181

This Standard Choice provides the ability to extend or limit report functionality to anonymous users in
Citizen Access.
The Standard Choices values include:
Y. Extends the functionality of running reports to anonymous users.
N. Only registered users have access to run reports.

ENABLE_AUTO_POPULATE_PARCEL_OWNER
Product
Citizen Access
Type
System Switch
Description
With this Standard Choice, you can enable Citizen Access to automatically populate the parcel owner
information in the application intake form and the renewal form.
Standard Choice values can include:
Yes

ENABLE_CAP_TYPE_ALIAS
Product
Civic Platform, Citizen Access, and Accela Wireless
Type
System Switch
Description
This Standard Choice allows users to view record type alias names instead of viewing the standard fourlevel record type of group, type, subtype, and category.
After enabling this Standard Choice, administrators must also edit the application categories for which they
want to display an alias and assign the aliases they want to use.
To display alias names for Citizen Access users, select the “Enable for ACA - Enable Application” option
on the Application Category - Edit page.
Standard Choice values can include:
Yes. The Application Type Alias column name displays. If the Application Type Alias column does not
display after setting the Standard Choice, check that you added the field to the portlet with the Form Portlet
Designer tool.
No. The Application Type Alias column name does not display.

ENABLE_CONDITION_RESOLVED_DATE
Product
Civic Platform, Mobile Office
Type
System Switch

| Standard Choices Reference | 182

Description
This Standard Choice changes the behavior of the status date in conditions and conditions of approval.
When you configure this Standard Choice, Civic Platform only updates the status date when you satisfy the
conditions or conditions of approval.
Standard Choice values can include:
Yes. Save Applied conditions (including conditions of approval) without a status date. When users click
Override Met Status and Mark condition As Pending actions on conditions of approval, the system clears
the condition status date. If the condition status type is Not Applied, the field value always defaults to the
date of the last status change, unless users specify a different date.
No. The field value always defaults to the date of the last status change, unless users specify a different
date or remove the date from the field.
When users edit the condition status:
•

In Civic Platform, you can create an expression to clear the status date field when users set the
condition status to applied.

•

Mobile Office can clear the status date (resolved date) when users edit the condition status to Applied.

ENABLE_CONTACT_ADDRESS
Product
Civic Platform, Citizen Access, and Mobile Office
Type
System Switch
Description
This Standard Choice controls the contact address feature.
Standard Choice values can include:
Yes. The Contact Address tab displays in the reference contact portlet, so users can manage contact
addresses for reference contacts and records.
No. The Contact Address tab does not display in the reference contact portlet, and users cannot view or
add contact addresses.

ENABLE_CONTACT_ADDRESS_VALIDATION
Product
Civic Platform, Citizen Access, and Mobile Office
Type
System Switch
Description
This Standard Choice controls whether you can require users to validate a new contact address against
the external address source that you specify. You can configure the validation settings in the Standard
Choice CONTACT_ADDRESS_TYPE.
Standard Choice values can include:
Yes. In Civic Platform, users can click the Validate button in the Contact Address section or Contact
Address tab page to validate a contact address. In Citizen Access or Mobile Office, when users save an
address to the Contact Address section, an Matching Address Result form displays with the validation
address.

| Standard Choices Reference | 183

No. There is no validation for new contact addresses.

ENABLE_CONTACT_TYPE_FILTERING_BY_MODULE
Product
Civic Platform, Citizen Access, and Mobile Office
Type
System Switch
Description
This Standard Choice enables or disables the limit on using specific contact types by module. You can use
it with Standard Choice ENABLE_CONTACT_TYPE_SECURITY to control how Civic Platform, Citizen
Access, and Mobile Office determine user access to record contacts by type. For more information, see
Table 80: Access Determination for Record Contacts by Type.
Note:
Before 7.2.0 release, you could limit the use of specific contact types by module in Citizen Access only.
Since 7.2.0 release, you can set module-based limits on contact types either in this Standard Choice or in
Citizen Access, and the setting takes effect in Civic Platform, Citizen Access, and Mobile Office. If it is the
first time you add this Standard Choice, Civic Platform and Mobile Office can enforce the module-based
limits previously set in Citizen Access.
When you set the Standard Choice to No, the module-based limits do not take effect in any of the products.
When you do not add or you disable the Standard Choice, the module-based limits take effect in Citizen
Access only.
Table 80: Access Determination for Record Contacts by Type
ENABLE_CONTACT_TYPE_
Module List
FILTERING_BY_MODULE
in Contact
Value
Type Setting
Portlet

ENABLE_
CONTACT_
TYPE_
SECURITY
Value

Assign
User Access
Contact
Type
Security To

Yes

Yes

User,
Group,
Module
(Highest
priority
first)))

In Civic Platform and Mobile Office, if you assign
specific security levels to certain users, those
users have specified access to the contact type
from within the module while the other users
have full access.

No

N/A

In Civic Platform and Mobile Office, all users
have full access to the contact type from within
the module.In Citizen Access, the contact type
is available to all users in the module unless you
further define contact type security in the page
flow.

Not-yetadded
module

N/A

N/A

In Civic Platform and Mobile Office, all users
can view the existing contacts of the contact
type and can change the contact type to a valid
one from within the module, but cannot create
new contacts of that type. In Citizen Access, the
contact type is not available in the module.

Added
module

Yes

User,
Group,
Module

In Civic Platform and Mobile Office, if you assign
specific security levels to certain users, those
users have specified access to the contact type

No

Added
module

In Citizen Access, the contact type is available
to all users in the module unless you further
define contact type security in the page flow.

| Standard Choices Reference | 184

ENABLE_CONTACT_TYPE_
Module List
FILTERING_BY_MODULE
in Contact
Value
Type Setting
Portlet

ENABLE_
CONTACT_
TYPE_
SECURITY
Value

Assign
User Access
Contact
Type
Security To
(Highest
from within the module while the other users
priority first)) have full access.
In Citizen Access, the contact type is available
to all users in the module unless you further
define contact type security in the page flow.

Not-yetadded
module

No

N/A

In Civic Platform and Mobile Office, all users
have full access to the contact type from within
the module.In Citizen Access, the contact type
is available to all users in the module unless you
further define contact type security in the page
flow.

N/A

N/A

In Civic Platform and Mobile Office, all users
have full access to the contact type from within
the module.In Citizen Access, the contact type
is available to all users in the module unless you
further define contact type security in the page
flow.

ENABLE_CONTACT_TYPE_SECURITY
Product
Civic Platform, Mobile Office
Type
System Switch
Description
This Standard Choice controls whether Civic Platform and Mobile Office enforce contact type security
on record contacts and reference contacts. ENABLE_CONTACT_TYPE_FILTERING_BY_MODULE
can also affect the user access to certain contact types in record contacts. See
ENABLE_CONTACT_TYPE_FILTERING_BY_MODULE for more information.
Standard Choice values can include:
Yes. Civic Platform and Mobile Office enforce the security that you have defined in the Contact Type
Setting portlet.
No. Civic Platform and Mobile Office do not enforce any contact type security, regardless of whether you
have defined it or not.

ENABLE_DISPLAY_ISLAMIC_CALENDAR
Product
Civic Platform, GIS
Type
System Switch
Description

| Standard Choices Reference | 185

This Standard Choice controls whether to support HRIJI (Islamic) dates and HRIJI (Islamic) calendar date
picker.
Table 81: ENABLE_DISPLAY_ISLAMIC_CALENDAR Standard Choice Values
Standard Choice Values

Value

Description

ENABLE_DISPLAY_
ISLAMIC_CALENDAR

Yes

The following date fields display dates in Islamic calendar format, and
provide the HRIJI (Islamic) calendar date picker for users to pick a
HRIJI (Islamic) date.
•

The Opened Date and Closed Date fields that displays when
users select to search by records in the GIS map;

•

All the date fields in the ASI or ASI table sections in Civic Platform
and Citizen Access.

The following date fields display dates in Islamic calendar format.
•

No (or
undefined)

The Opened Date and Closed Date fields in the Show Accela
Record List window that displays when users perform the Show
Accela Record command in the GIS map.

All the date fields display in standard date format and provide a
standard calendar date picker.

ENABLE_EMSE
Product
Civic Platform
Type
System Switch
Description
Standard Choice values include:
Yes
No

ENABLE_EMAIL_NOTIFICATION_PROMPT
Product
Civic Platform
Type
System Switch
Description
This Standard Choice determines whether a user can choose an email template for meeting invites, and
also controls whether email notification pop-up window displays.
Standard Choice values include:
Yes
No

| Standard Choices Reference | 186

ENABLE_EXPIRED_LICENSE
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice with Standard Choice value ENABLE_EXPIRED turns on expired license
functionality and insurance notification functionality. The other Standard Choice values control whether
to email a license expiration notification, business license expiration notification, or insurance expiration
notification by email in Civic Platform or at login in Citizen Access.
Standard Choice values include:
ENABLE_EXPIRED
ENABLE_NOTIFY_LICENSE_EXPIRED_BY_EMAIL
ENABLE_NOTIFY_LICENSE_EXPIRED_AT_LOGIN
ENABLE_NOTIFY_BUSINESS_LICENSE_EXPIRED_BY_EMAIL
ENABLE_NOTIFY_BUSINESS_LICENSE_EXPIRED_AT_LOGIN
ENABLE_NOTIFY_INSURANCE_EXPIRED_BY_EMAIL
ENABLE_NOTIFY_INSURANCE_EXPIRED_AT_LOGIN
Value Description:
Yes. Enables the notification.
No. No disables the notification.

ENABLE_EXPRESSION_AND_SCRIPT_CACHE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls whether Civic Platform caches EMSE scripts and expressions for
performance enhancement.
Value Description:
Yes. Civic Platform caches all the existing events, scripts, master scripts, and expressions. The cache
list portlet (URL: https://:/ portlets/cache/cacheList.do) provides the
following cache-clearing options for you to manually clear the cache: Expression Builder, Events, Scripts,
and Master Scripts.
No. Civic Platform does not cache the existing events, scripts, master scripts, nor expressions. Every time
users run an event, script, or expression, Civic Platform uses the most updated version.

ENABLE_MULTIPLE_CONDITION_GROUP_FOR_TYPE
Product

| Standard Choices Reference | 187

Civic Platform
Type
System Switch
Description
This Standard Choice determines whether you can associate multiple condition groups with the same
condition type.
Standard Choice values can include:
Yes
No

ENABLE_ORIGINAL_VALUATION_CALCULATOR
Product
Civic Platform
Type
System Switch
Description
If you set this Standard Choice to Yes, users can recalculate a fee based on the original valuation
calculator after the update of the valuation calculator.
Standard Choice values can include:
Yes
No

ENABLE_PARCEL_ENDORSEMENT
Product
Civic Platform
Type
System Switch
Description
Set this Standard Choice to Yes to see the following behavior:
•

When a user deletes a GIS object from the application intake form or from the GIS tab on the record
detail portlet, Civic Platform removes parcels associated with the object.

•

When a user adds a new GIS object from the GIS tab of the record detail portlet and there is an
existing GIS object, the new object does not replace the existing object. Prior to this enhancement, if
MULTIPLE_APO_GIS_SELECTION was set to No, the new object replaced the existing object for the
same scenario.

•

When a user deletes a parcel, either directly or by virtue of its association with a deleted address or
owner, Civic Platform also removes GIS objects associated with the parcel.

| Standard Choices Reference | 188

ENABLE_PAYMENT_ENDORSEMENT
Product
Civic Platform
Type
System Switch
Description
You can set this Standard Choice value to Yes to display the Print Application Endorsement button on the
receipt summary of a record (Record > Payment tab > Check receipt number > receipt summary).

ENABLE_PERMITS_PLUS_SEARCH
Product
Civic Platform
Type
System Switch
Description
This Standard Choice allows users of both the ‘PERMITS’ Plus permitting system and Civic Platform to
search for records from both systems in Civic Platform and to associate ‘PERMITS’ Plus records to Civic
Platform records.
Table 82: ENABLE_PERMITS_PLUS_SEARCH Standard Choice Values
Standard Choice Value

Value Desc

Description

ENABLE

Yes, No

This value controls whether to enable
‘PERMITS’ Plus search in Civic Platform.

PP_WEB_SERVICE_URL

The ‘PERMITS’ Plus
web service URL. For
example:http://206.80.21.46/
permplusservice/
permplusservice.asmx

This value defines the ‘PERMIT’ Plus web
service URL from which to search for records.

ENABLE_SELECT_ADDRESS_OWNER_AFTER_PARCEL
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the way users attach address and owner objects to a record.
Standard Choice values can include:
Yes. Provides a message after parcel selection.
No. Attaches without a message.

| Standard Choices Reference | 189

ENABLE_SELECT_PARCEL_OWNER_AFTER_ADDRESS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the way users attach parcel objects and owner objects to a record.
Standard Choice values can include:
Yes. Provides a message after address selection.
No. Attaches without message.

ENABLE_THE_DISPLAY_OF_SECURITY_ANSWER
Product
Citizen Access
Type
System Switch
Description
This Standard Choice defines whether to display the answers to security questions as text or dots in the
Public User administration portlet.
Standard Choice values can include:
Yes. The password request answers in each public user account display in plain text.
No. The password request answers in each public user account display in dots, so agency staff cannot
view the answers.

ENFORCEMENT DEFENDANT EYE COLOR
Product
Civic Platform, Mobile Office
Type
System Switch
Description
Specific to the Code Enforcement module, this Standard Choice enables you to define the value options for
the drop-down list of the defendant eye color.

ENFORCEMENT DEFENDANT HAIR COLOR
Product
Civic Platform, Mobile Office
Description

| Standard Choices Reference | 190

Specific to the Code Enforcement module, this Standard Choice enables you to define the value options for
the drop-down list of the defendant hair color.

EVENT_ACTION
Product
Civic Platform
Description
You can use this Standard Choice to identify all possible event actions for the event manager and the
script engine. The Standard Choice values you create populate the Action list in the script.
Each Standard Choice value must also have a corresponding Standard Choice.
For example, you can create a GIS proximity alert that checks whether night club applications are
within 3000 feet of a church or school. In such a case, you might create an event action value named
NIGHTCLUBCHECK, you must also create a new Standard Choice named NIGHTCLUBCHECK. The
values for the NIGHTCLUBCHECK Standard Choice include the Distance and a description of 3000 feet.
Standard Choice values can include:
{Actions that you want to include for the event manager and the script engine.}
Value Desc provides the name of the javascript file that you add to the directory named “\eventmanager
\javascript\”.
{For example, /eventmanager/javascript/NIGHTCLUBCHECK.js.}

EVIDENCE_DISPOSITION
Product
Civic Platform
Type
System Switch
Description
This Standard Choice populates the values in the Reasons drop-down list related to the chain of custody
for the evidence.
Standard Choice values can include:
Released
Destroyed
Sent to Court

EVIDENCE_LOCATION
Product
Civic Platform
Type
System Switch
Description

| Standard Choices Reference | 191

This Standard Choice defines the value options for the Evidence Location drop-down list in the evidence
form (new/edit).
Standard Choice values can include:
Evidence Room 1
Evidence Room 2
Evidence Room 3

EVIDENCE_TYPE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the value options for the Evidence Type drop-down list in the evidence form
(new/edit).
Standard Choice values can include:
Firearms
Illicit Substances
Other

EVIDENCE_UNITS_MEASURE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the value options for the Evidence Unit of Measure drop-down list in the
evidence form (new/edit).
Standard Choice values can include:
Ounces
Pounds
Inches
Feet

EXAM_CSV_FORMAT
Product
Civic Platform, Citizen Access
Type
System Switch

| Standard Choices Reference | 192

Description
With this Standard Choice, you can define the column titles to use in the CSV examination upload file.
Table 83: EXAM_CSV_FORMAT Standard Choice Values
Standard Choice Value

Value Description

Description

AGENCY

Provide the column title. For
example, COLUMN=Agency.

This value defines the column title for
AGENCY in the CSV file.
Note:
Education providers can upload
exam scores for the applications
that belong to a sub-agency from
the main agency’s Citizen Access
site. Administrators must configure
this Standard Choice value so the
agency code column in a score CSV
file can correctly show the name for
the agency that each application
belongs to. If you do not properly
enable or configure the Standard
Choice value, the agency code
column always displays the name
of the main agency. In a multipleagency administration, you can only
add this Standard Choice value for
the main agency.

ALTID

Provide the column title. For
example, COLUMN=ALTID.

This value defines the column title for ALTID
in the CSV file.

DATE

Provide the column
title. For example,
COLUMN=Date;TYPE=Date;
FORMAT=MM/dd/yyyy.

This value defines the column title, type and
format for DATE in the CSV file.

EXAM_NAME

Provide the column title. For
example, COLUMN=Examination
Name.

This value defines the column title for
EXAM_NAME in the CSV file.

GRADING_STYLE

Provide the column title. For
example, COLUMN=Grading
Style;TYPE=Enum;
FORMAT=none|passfail|score|
percentage.

This value defines the column title, type and
format for GRADING_STYLE in the CSV file.

PASSING_SCORE

Provide the column title. For
example, COLUMN=Passing
Score.

This value defines the column title for
PASSING_SCORE in the CSV file.

PROVIDER_NAME

Provide the column title. For
example, COLUMN=Provider
Name.

This value defines the column title for
PROVIDER_NAME in the CSV file.

PROVIDER_NBR

Provide the column title. For
example, COLUMN=Provider
Number.

This value defines the column title for
PROVIDER_NBR in the CSV file.

SCORE

Provide the column title. For
example, COLUMN=Score.

This value defines the column title for SCORE
in the CSV file.

| Standard Choices Reference | 193

EXAMINATION_WORKFLOW_TASK_STATUS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice stores the examination workflow configuration in the license settings portlet.
Note:
Do not modify this Standard Choice.

EXPIRATION_INTERVAL_UNITS
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice defines the value options for the drop-down list of license expiration intervals.
Standard Choice values can include:
Days
Months
Years

EXPIRATIONDATE_DISPLAY_FLAG
Product
Civic Platform
Type
System Switch
Description
This Standard Choice allows you to control the display of the expiration date field on the credit card
payment review screen.
Standard Choice values can include:
Yes. The expiration date displays on the payment review screen.
No. The credit card expiration date does not display on the payment review screen.

EXPORT_MAX_RECORDS
Product

| Standard Choices Reference | 194

Civic Platform
Type
System Switch
Description
This Standard Choice determines how many records you can export in CSV (Comma Separated Value)
format.
By default, agency users can export up to 1000 records. If you want to give agency users the option to
export more than 1000 records, configure this Standard Choice with an export maximum value greater than
1000.

EXTERNAL_ADDRESS_SOURCE
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
This Standard Choice defines the external address source. Agencies can use existing APO repository
information and maintain just one APO repository for all its needs.
Table 84: EXTERNAL_ADDRESS_SOURCE Standard Choice Values
Standard Choice Value

Value Desc

Description

CAN_CONTAIN_ OWNERS

YesNo

This value specifies whether the owner
information associated with the selected
address can populate within the application.
If you set the value description to Yes, the
Owner tab of the reference Address detail
portlet can list all the owners related to the
address.
If you set the value description fields
for CAN_CONTAIN_OWNERS and
CAN_CONTAIN_PARCELS to Yes and you
enable FID 8232 Get Parcel And Owner,
Civic Platform exposes the Get Parcel &
Owner button on the Address section of the
application intake form.

CAN_CONTAIN_ PARCELS

YesNo

This value specifies whether the parcel
information associated with the selected
address can populate within the application.
If you set the value description to Yes, the
Parcel tab of the reference Address detail
portlet can list all the parcels related to the
address.

SOURCE_ATTRIBUTES_
MAPPING_ENABLE

YesNo

This value specifies whether the external
APO data source handles the mapping
between the address template attributes and
the GIS map layer fields. When Civic Platform
uses GIS as its external APO data source
and each APO template attribute is mapped
to a GIS map layer field, users can search for
external APO data by template attribute.

| Standard Choices Reference | 195

Standard Choice Value

Value Desc

Description

SOURCE_AUTH_PWD

Enter the web service
authentication user password.

This is the user password for accessing the
web service.

SOURCE_AUTH_USER

The web service authentication
user name.

This is the user name for accessing the web
service.

SOURCE_ID

A unique ID.

This value identifies the source in the code.

SOURCE_LOCATION

InternalExternal

The location option for the external APO
source (Internal or External). Internal
indicates that Civic Platform uses the current
Civic Platform reference APO as the source.

SOURCE_MAP_SERVICE_ID

Map Service ID.

This value specifies the map service from
which you want to retrieve geocoded
addresses as external addresses.

SOURCE_METHOD

Web service

The APO source method to connect to the
external source. Civic Platform only supports
web service.

SOURCE_NAME

Enter the source name.

The name of the external source.

SOURCE_URL

The external APO source URL. For example, http://source.url/sur.wsdl.

WEB_SERVICE_
SSL_SUPPORTED

Yes No True False. Default: Yes

This value defines whether the web service
needs SSL data transfer.

IS_XML_DATA

Yes No. Default: No

Specifies whether to use the XML data
source.

XAPO_CLIENT_VERSION

7.2.3

7.2.3 stands for Civic Platform Version 7.2.0
Feature Pack 3. In 7.2.0 Feature Pack 3,
Civic Platform added 5 address fields: House
# Alpha (start), House # Alpha (end), Level
Prefix, Level # (start), and Level # (end).
You must define this Standard Choice value
so users can search for addresses by the 5
address fields in the external APO source.

EXTERNAL_CONTACT_ADDRESS_SOURCE_[SOURCE NAME]
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
This Standard Choice determines the external validation source for contact addresses. You can configure
multiple sources, and specify the name of each source in the [SOURCE_NAME] portion.
You can define the Standard Choices in the same way as for the Standard Choice
EXTERNAL_ADDRESS_SOURCE. See Table 84: EXTERNAL_ADDRESS_SOURCE Standard Choice
Values for the Standard Choice values and description.

EXTERNAL_DOC_REVIEW
Product

| Standard Choices Reference | 196

Civic Platform
Type
System Switch
Description
This Standard Choice is used for connectivity and authentication of the third party plan review tool. It also
enables the mapping portlet for the named plan review tool. See Mapping Data for Third Party Document
Review in the Civic Platform Administration Guide for more information.
Before proceeding with standard choice configuration, make sure you designate an API account for the
third party application. This account will be dedicated for API calls. Make note of the account name/
password, and the web application URL so you can use them when configuring this standard choice.
Standard Choices Value

Value Description

ACCOUNT

user name=;
password=

PRODUCT



(e.g., EPC)

WEB_SERVICE_URL



EXTERNAL_OWNER_SOURCE
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
This Standard Choice defines the external owner source. Agencies can use existing external APO
repository information and maintain just one APO repository for all its needs.
Table 85: EXTERNAL_OWNER_SOURCE Standard Choice Values
Standard Choice Value

Value Desc

Description

SOURCE_ATTRIBUTES_
MAPPING_ENABLE

YesNo

This value specifies whether the external
APO data source handles the mapping
between the owner template attributes and
the GIS map layer fields. When Civic Platform
uses GIS as its external APO data source
and each APO template attribute is mapped
to a GIS map layer field, users can search for
external APO data by template attribute.

SOURCE_AUTH_PWD

Enter the web service
authentication user password.

This is the user password for accessing the
web service.

SOURCE_AUTH_USER

The web service authentication
user name.

This is the user name for accessing the web
service.

SOURCE_ID

A unique ID.

This value identifies the source in the code.

SOURCE_LOCATION

InternalExternal

The location option for the external APO
source (Internal or External). Internal

| Standard Choices Reference | 197

Standard Choice Value

Value Desc

Description
indicates that Civic Platform uses the current
Civic Platform reference APO as the source.

SOURCE_METHOD

Web service

The APO source method to connect to the
external source. Civic Platform only supports
web service.

SOURCE_NAME

Enter the source name.

The name of the external source.

SOURCE_URL

The external APO source URL. For example, http://source.url/sur.wsdl.

WEB_SERVICE_
SSL_SUPPORTED

Yes No True False. Default: Yes

This value defines whether the web service
needs SSL data transfer.

IS_XML_DATA

Yes No Default: No

Specifies whether to use the XML data
source.

EXTERNAL_PARCEL_SOURCE
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
This Standard Choice defines the external parcel source. Agencies can use existing external APO
repository information and maintain just one APO repository for all its needs.
Table 86: EXTERNAL_PARCEL_SOURCE Standard Choice Values
Standard Choice Value

Value Desc

Description

CAN_CONTAIN_ ADDRESSES

Yes, No

This value specifies whether the address
information associated with the selected
parcel can populate within the application.
If you set the value description to Yes, then
the Address tab of the reference Parcel detail
portlet lists all the addresses related to the
parcel.
If you set the value description fields
for CAN_CONTAIN_ADDRESSES and
CAN_CONTAIN_OWNERS to Yes and
enable FID 8234 Get Address And Owner,
Civic Platform exposes the Get Address &
Owner button on the Parcel section of the
application intake form.

CAN_CONTAIN_ OWNERS

Yes, No

This value specifies whether the owner
information associated with the selected
parcel can populate within the application.
If you set the value description to Yes, then
the Owner tab of the reference Parcel detail
portlet lists all the owners related to the
parcel.

SOURCE_ATTRIBUTES_
MAPPING_ENABLE

Yes, No

This value specifies whether the external
APO data source handles the mapping
between the parcel template attributes and
the GIS map layer fields. When Civic Platform
uses GIS as its external APO data source

| Standard Choices Reference | 198

Standard Choice Value

Value Desc

Description
and each APO template attribute is mapped
to a GIS map layer field, users can search for
external APO data by template attribute.

SOURCE_AUTH_PWD

Enter the web service
authentication user password.

This is the user password for accessing the
web service.

SOURCE_AUTH_USER

The web service authentication
user name.

This is the user name for accessing the web
service.

SOURCE_ID

A unique ID.

This value identifies the source in the code.

SOURCE_LOCATION

InternalExternal

The location option for the external APO
source (Internal or External). Internal
indicates that Civic Platform uses the current
Civic Platform reference APO as the source.

SOURCE_METHOD

Web service

The APO source method to connect to the
external source. Civic Platform only supports
web service.

SOURCE_NAME

Enter the source name.

The name of the external source.

SOURCE_URL

The external APO source URL. For example, http://source.url/sur.wsdl.

WEB_SERVICE_
SSL_SUPPORTED

Yes, No, True, False

IS_XML_DATA

Yes, No

Default: Yes

Default: No

This value defines whether the web service
needs SSL data transfer.
Specifies whether to use the XML data
source.

You can configure a GIS map layer as external parcel source. Civic Platform can retrieve GIS objects from
the map layer as external parcels for users to view or attach to records.
Table 87: Standard Choice Values for GIS Map Layer
Standard Choice Value

Value Desc

Description

AUTO_LINK_TO_ GIS_OBJECT Yes

This value “Yes” defines GIS as the external
source.

SOURCE_MAP_SERVICE_ID

Map Service ID

This value sets the map service that contains
the target layer from which you want to
retrieve GIS objects as external parcels.

SOURCE_MAP_LAYER_ID

Map Layer ID

This value sets the map layer from which
you want to retrieve GIS objects as external
parcels.

EXTERNAL_PROVIDER_ADAPTER
Product
Civic Platform
Type
System Switch
Description
This Standard Choice stores the agency customized external provider adapter web service URL.
Standard Choice values can include:
{External exam provider API website. For example, api.exambuilder.com}

| Standard Choices Reference | 199

Value Desc:
{External exam provider adapter web service URL. For example, ${av.biz.url}/education/ExamBuilder?
wsdl.}

EXTERNAL_REVIEWERS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice is used for the third party plan review tool. If you have plan reviewers who are not
Civic Platform users, configure this standard choice.
1. Before proceeding, ensure that each reviewer has a Citizen Access account.
2. Ensure that the email address used for the reviewer’s Citizen Access account is the same as the email
address used in the reviewer’s third party review tool profile.
3. Note the exact name and email address from the Citizen Access account.
4. Configure the standard choice EXTERNAL_REVIEWERS using the information from step 3.
Standard Choices Value



Value Description



You can find reviewer names added via this standard choice in the list of staff available for task
assignment in Civic Platform. External reviewers are listed in the External Users category.

FEE_QUANTITY_ACCURACY
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
This Standard Choice defines the maximum number of digits allowed in the decimal portion of the Quantity.
You can set the Standard Choice Value to a number between 2 and 10. For example, if the Standard
Choice Value is 10, the maximum number of digits allowed in the decimal portion is 10.
If this Standard Choice is undefined, the Quantity field has 2 decimals.
Note:
The maximum number of total digits allowed in the Quantity field is 14 for positive integers, or 16 for other
values.

| Standard Choices Reference | 200

FILE_UPLOAD_BEHAVIOR
Product
Civic Platform
Type
System Switch
Description
This Standard Choice configures the file upload behavior for attaching documents to a record.
Table 88: FILE_UPLOAD_BEHAVIOR Standard Choice Values
Value

Applicable Product

Description

Basic {Default}

Civic Platform Citizen
Access

This mode requires users to install Silverlight runtime on their
computers for file uploading. If you activate this mode, the
Windows Open dialog opens for users to select one or multiple files
from a single folder to upload files to a record. For illustration, see
Figure 11: Upload Files in Basic Mode.

Advanced

Civic Platform Citizen
Access

This mode requires users to install Silverlight runtime on their
computers. If you activate this mode, a Batch Upload or File
Upload window opens for users to select files from one or more
folders, and then upload the selected files to a record. For
illustration, see Figure 12: Upload Files in Advanced Mode.

Html5

Citizen Access

In this mode, users need not install Silverlight runtime for file
uploading in Citizen Access, and the upload behavior is the same
as in the Basic mode.
Note:
Citizen Access applies the Html5 mode if you activate
the Html5 mode, no matter whether you activate another
mode (Basic/Advanced) or not.

Note:
If you enable section 508 accessibility mode in Civic Platform and Citizen Access, the file upload behavior is
always Basic regardless of the Standard Choice configuration.
When a contract inspector or self-certified inspector uploads inspection results in Citizen Access, the file
upload behavior can only be Advanced or Html5. The Html5 mode provides the File Upload window which is
similar to the one provided in the Advanced mode but has minor UI differences.

| Standard Choices Reference | 201

Figure 11: Upload Files in Basic Mode

Figure 12: Upload Files in Advanced Mode

FIND APP DATE RANGE
Product
Citizen Access
Type
System Switch
Description
This Standard Choice defines a default date range when public users search for permits.

| Standard Choices Reference | 202

The Standard Choices value can be:
{Enter a numeric value that represents the number of days between the search start date and the end date
(the current date). For example, enter 365 if you want the default date range to be 1 year ago till now.}

FIND_TIME_ACCOUNTING_LOGGED_DATE_RANGE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice configures the default Logged From date in the time accounting search portlet. The
default Logged To date is the current date.

Standard Choice value can include:
{A historical date}. Please use your best judgment to define a date for users to get a realistic set of search
results.
{A number}. Civic Platform subtracts the defined number of days from the current date to get the default
Logged From date.
If the Standard Choice is undefined, the default Logged From Date is one week before the current date
(the default Logged To date).

FISCAL_YEAR_START
Product
Civic Platform
Type
System Switch
Description
This Standard Choice specifies that the sequence number generator uses the fiscal year instead of
calendar year to generate numbering.
Standard Choice value is:
MONTH
Value Description:
{The number for the value MONTH. For example, if the Value Desc is 7 then July is the start of the fiscal
year.}

| Standard Choices Reference | 203

FOOD_FACILITY_INSPECTION
Product
Citizen Access
Type
System Switch
Description
This Standard Choice controls the food facility search functionality in Citizen Access.
Table 89: FOOD_FACILITY_INSPECTION Standard Choice Values
Standard Choice Values

Value Desc

Description

RELATED_LICENSE_ TYPES

Enter the license types in the
Identifies the license types used for the food
value description, separated with a facility
comma.

PREVIOUS_INSPECTION_
DISPLAY_TOTAL_ NUMBER

Enter a number.

Sets the number of most recent inspections
allowed for display in the Food Facility Details
page.

PREVIOUS_INSPECTION_
DISPLAY_LAST_DAYS

Enter a number.

Sets a number of days counted backwards
from the current date, excluding the dates on
which no inspection is given result.
Citizen Access displays the inspections
that have results on any one of the defined
number of days in the Previous Inspection
section of the food facility license. For
example, set “3” to the Value Description for
this Standard Choice Value, and the current
date is 1/2/2012.
For a food facility license, it has no inspection
resulted on the current day. Its last three
inspection-resulting days are 1/1/2012,
1/7/2011, and 1/1/2011.
The inspections of which the Result Date
is one of these three days is displayed in
the Previous Inspection section of that food
facility license in Citizen Access.
The setting is for global use by the food
facility licenses as default value. Agency
users can specify a different number for a
particular food facility license in the “Display
Inspection in the past # of Days” field in the
license Detail portlet in Civic Platform.

THE_MOST_
INSPECTION_DELAY_ DAYS

Enter a number.

Sets a number of days counted forwards from
the inspections result date. You can display
inspections only after the configured number
of days. For example, if you set the value
description to 5 (days after the result date)
and an inspection result occurs on November
12, then you can display the inspection from
November 17.

| Standard Choices Reference | 204

FULL_PAY_ALLOCATION_OPTIONS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice determines the allocation method of the full pay functionality which allocates the
payment amount in sequence until the applied payment goes to zero.
The Full Pay button reallocates amounts in the Apply Credits and Apply Payments fields based on the
Standard Choice settings.
Determines payment options for the Apply Payment page.
Standard Choice values can include:
Automatic. Civic Platform processes the payment in the order of fee item priority. If you set this Standard
Choice value, you must set the priority of the fee items in Civic Platform.
Standard. Civic Platform processes the payment in the order of outstanding fees, which starts with the first
on the list.

GENDER
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice allows users to define the gender for contacts and licensed professionals.
Standard Choice values may include:
F - Female
M - Male

GIS_ATTACHMENT_SELECTION
Product
Civic Platform, GIS
Type
System Switch
Description
This Standard Choice defines user notification when GIS objects attach to a record. The two options
indicate whether all GIS objects attach without a prompt to the user or if the system provides a selection
page prompt.
Standard Choice values can include:
All

| Standard Choices Reference | 205

User Selection

GIS_BUFFER_DISTANCE
Product
Civic Platform, GIS
Type
System Switch
Description
This Standard Choice sets buffer distance for Civic Platform to artificially shrink a parcel that overlays
multiple GIS objects, when mapping the parcel attribute in the GIS map to an ASI field, or when auto
assigning inspectors to records that deal with the parcel but have no inspection district information. With
the buffer distance setting, users no longer need to select to which GIS object to map the parcel.
Table 90: GIS_BUFFER_DISTANCE Standard Choice Values
Standard Choice Values

Value Description

Description

APO_ASI_ATTRIBUTE_
POPULATION_BUFFER

Enter any numeric value (-0.1, 0.2, This value defines the distance by which
0, etc.)
Civic Platform artificially shrinks a parcel
when mapping the parcel attribute in the
Default: -0.1
GIS map to an ASI field. The Value Desc
must be negative (for example, -0.1) for
shrinking parcels. If the Value Desc is 0,
Civic Platform does not change the parcel
border. If the Value Desc is positive, Civic
Platform artificially stretches the parcels. The
measurement unit of the value is the same as
used in the GIS map.

INSPECTION_AUTO_
ASSIGN_BUFFER

Enter any numeric value (-0.1, 0.2, This value defines the distance by which
0, etc.)
Civic Platform artificially shrinks a parcel
when auto assigning inspectors for records
Default: -0.1
that deal with the parcel but have no
inspection district information. The Value
Desc must be negative (for example, -0.1)
for shrinking parcels. If the Value Desc is 0,
Civic Platform does not change the parcel
border. If the Value Desc is positive, Civic
Platform artificially stretches the parcels. The
measurement unit of the value is the same as
used in the GIS map.

GIS_NEARBY_QUERY_LIMITATION
Product
GIS
Type
System Switch
Description
This Standard Choice sets various limits on the Nearby Query functionality, for example, the maximum
number of features that users can select to perform a nearby query. Proper limits can prevent performance
issues when users select too many GIS objects or meaningless data to perform a nearby query.

| Standard Choices Reference | 206

Civic Platform has set default limits but you can use this Standard Choice to change the limits according to
your agency’s specific requirements.
Table 91: GIS_NEARBY_QUERY_LIMITATION Standard Choice Values
Standard Choice Value

Value Desc

Description

GIS_NEARBY_INPUT_
FEATURES_LIMIT

Enter a numeric value. For
example, 10.

This value defines the maximum number of features
that users can select to perform a nearby query. If
you do not define this Standard Choice value, Civic
Platform sets the limit to 10 by default.

GIS_NEARBY_SEARCH_
AREA_LIMIT_SQKM

Enter a numeric value. For
example, 700.

This value defines the maximum map extent within
which users can perform a nearby query. The
measurement unit is square kilometer. If you do not
define this Standard Choice value, Civic Platform sets
the limit to 700 square kilometers by default.

GIS_NEARBY_INPUT_
FEATURE_COORDS_ LIMIT

Enter a numeric value. For
example, 2000.

When users select a complex GIS object or multiple
GIS objects to perform a nearby query, the selection
may contain multiple coordinate pairs. This Standard
Choice value defines the maximum number of
coordinate pairs that the selection contains. If you do
not define this Standard Choice value, Civic Platform
sets the limit to 2,000 pairs by default.

GIS_NEARBY_
DISTANCE_LIMIT_ METERS

Enter a numeric value. For
example, 10000

This value defines the maximum search radius that
users can specify to perform a nearby query. The
measurement unit is meter. If you do not define this
Standard Choice value, Civic Platform sets the limit to
10,000 meters by default.

GIS_PROX_ALERT_TRIGGERS
Product
GIS
Type
System Switch
Description
You must configure this Standard Choice for proximity alerts to function.
Standard Choice values can include:
Within distance of
Value Desc:
{Enter a numeric value that represents the distance.}

GLOBAL_SEARCH_BUILD_INDEX_ENTITIES
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the objects for which the global search batch job builds the index server.

| Standard Choices Reference | 207

Standard Choice values can include:
CAP
ADDRESS
LP
ASSET
PARCEL
DOCUMENT
CONTACT

GLOBAL_SEARCH_MAX_COUNT
Product
Civic Platform
Type
System Switch
Description
This Standard Choice sets the maximum number of results returned in a global search. The default value is
10000.

GLOBAL_TRUST_ACCOUNT
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the global trust account ID and the module to which it is applicable. If a user
tries to process a refund, and chooses Trust Account as the method, then the global trust account for the
module to which the current record belongs displays by default.
Agencies can assign one or more global trust accounts as global to Civic Platform users. If a trust account
is global, then it is available to all records within one or more modules.
If a user selects a defined global trust account and a primary trust account for a record, then the primary
trust account is the default trust account.

Standard Choice values can include:
{Enter the trust account ID. For example, 2011-TrustAccount-000.}

| Standard Choices Reference | 208

Value Desc:
{Enter the module for which the global trust account is applicable.}
Building
All
If a global trust account is applicable to all (modules) and also a specific module (Building, for example),
the trust account for the specific module takes precedence (has a higher priority).

GRACE_PERIOD_INTERVAL_UNITS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the value options for the time unit to be used for the Grace Period Interval.
Standard Choice values can include:
Days
Months
Years

HEARING BODY
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the value options for the hearing bodies drop-down list. Users can update
this list from either the Standard Choices or Hearing Bodies.
Standard Choice values can include:
Board of Appeals
City Council
Planning Commission
Zoning Administrator

HEARING LOCATION
Product
Civic Platform
Type
System Switch
Description

| Standard Choices Reference | 209

This Standard Choice determines the venues where you can conduct hearings, such as a city hall or a
county administration building.
The values you enter for this Standard Choice populate the Location drop-down list. Agency users can
access this drop-down list from the Hearing Calendar list portlet under the Item secondary tab.
Standard Choice values can include:
{Enter up to 40 characters for each hearing location.}
City Council Chamber
City Hall Main Room
County Administration Building
Civic Auditorium

HEARING MAX TIME
Product
Civic Platform
Type
System Switch
Description
This Standard Choice determines the length (in minutes) of hearings. For example, you might want to
measure hearing times in fifteen minute increments: 15, 30, 45, 60, 75, and 90.
The values you enter for this Standard Choice populate the Duration drop-down list. Agency users can
access this drop-down list from the Hearing Calendar list portlet under the Item secondary tab. You can
enter up to four characters for each Standard Choice value.
Standard Choice values can include:
{Enter a number. Unit: minute.}
10
30

I18N_ADDRESS_FORMAT
Product
Civic Platform, Citizen Access, GIS, and Mobile Office
Type
System Switch
Description
This Standard Choice allows users to define the format for addresses.
Note:
Every time when updating the value description, you must rebuild the index for all the Civic Platform objects
that are related to addresses.
Table 92: I18N_ADDRESS_FORMAT Standard Choice Values
Standard Choice Values

Value Description

Description

STANDARD_ADDRESS_
FORMAT

Enter the corresponding
parameters listed in Table 94:

This value determines how to concatenate
address fields in Civic Platform, GIS, and

| Standard Choices Reference | 210

Standard Choice Values

LONG_ADDRESS_NO_
FORMAT
LONG_ADDRESS_WITH_
FORMAT
SHORT_ADDRESS_
NO_FORMAT
SHORT_ADDRESS_With_
FORMAT

Value Description
Address Parameters and the
Corresponding Fields to define
the address concatenation. The
parameters shall be separated
with commas "," or hyphens "-".
No extra space is allowed. For
example, enter "$$StreetType$$,$
$UnitType$$". If a parameter does
not have any value, the comma
or hyphen after the parameter
will not show in the address
concatenation.

Define the address patterns with
the parameters listed in the Table
94: Address Parameters and the
Corresponding Fields. You can
modify the patterns to meet your
agency’s needs, and can also
insert the HTML code into the
patterns to define, such as, font
and color. Below is an example
of defining an address pattern: $
$HouseNumberStart$$$$Direction$
$$$StreetName$$
$$StreetType$$,$$UnitType
$$$$UnitStart$$,$$City$$$
$State$$$$Zip$$$$Country$$,$
$AddressType$$

Description
Mobile Office. The configured concatenated
address displays everywhere a full address
is shown. If you do not define this Standard
Choice value, then the full address uses a
default concatenation of fields, which varies
among different products:
•

In Civic Platform, the full address is
comprised of the following fields in listed
order: Street # (start), Start Fraction,
Street # (end), End Fraction, Direction,
Street Name, Street Type, Street Suffix
(Direction), Unit Type, Unit # (start), Unit #
(end), County, State, and Zip Code.

•

In GIS, the full address is comprised of
the following fields in listed order: Street
Number, Fraction, Direction, Street Name,
Street Type, Unit Type, Unit, City, State,
Country, and Zip Code.

•

In Mobile Office, the full address is
comprised of the following fields in listed
order: Street Number, Fraction, Street
Prefix, Street Name, Street Type, Street
Suffix, Unit, and Unit Type.

These values are four address patterns
which apply to different sections and forms
in Citizen Access. To get an exhaustive list
of sections and forms and their assigned
address pattern, see Table 93: Scope of The
Address Format Control.

Table 93: Scope of The Address Format Control
Pages

Section/Form

Address Format

Look Up property Information

Look Up by Address

SHORT_ADDRESS_NO_FORMAT

Look Up property Information

Look Up by parcel

SHORT_ADDRESS_NO_FORMAT

Look Up property Information

Look Up by Owner

SHORT_ADDRESS_NO_FORMAT

Address Detail

Address Summary

SHORT_ADDRESS_WITH_FORMAT

Parcel Detail

Address section

SHORT_ADDRESS_NO_FORMAT

Owner Detail

Address section

SHORT_ADDRESS_NO_FORMAT

Application intake form

Address search result list

LONG_ADDRESS_NO_FORMAT

Application intake form

Address auto-fill drop-down list

SHORT_ADDRESS_NO_FORMAT

Application intake form

Parcel search result list

SHORT_ADDRESS_NO_FORMAT

| Standard Choices Reference | 211

Pages

Section/Form

Address Format

Application intake form

Owner search result list

SHORT_ADDRESS_NO_FORMAT

Review page

Address Summary

LONG_ADDRESS_WITH_FORMAT

Record Detail

Address Summary

LONG_ADDRESS_WITH_FORMAT

Search by Address

Address search result list

LONG_ADDRESS_NO_FORMAT

Record Home

Record list

SHORT_ADDRESS_NO_FORMAT

Collection Detail

Record list

SHORT_ADDRESS_NO_FORMAT

Enter Work Location

Address search result list

LONG_ADDRESS_NO_FORMAT

Cart management

Address Summary

SHORT_ADDRESS_NO_FORMAT

Receipt

Address Summary

SHORT_ADDRESS_NO_FORMAT

Search for Licensee

Record list

SHORT_ADDRESS_NO_FORMAT

Show Record Dialog page

Parcel list

SHORT_ADDRESS_NO_FORMAT

Show Record Dialog page

Record list

SHORT_ADDRESS_NO_FORMAT

Trust Account Detail page

Associate Address Summary

LONG_ADDRESS_NO_FORMAT

Trust Account Detail page

Associate Parcel list

SHORT_ADDRESS_NO_FORMAT

Inspection Location and Contact Location

LONG_ADDRESS_WITH_FORMAT

Table 94: Address Parameters and the Corresponding Fields
Parameter

Field

$$HouseNumberStart$$

Street # (start)

$$Street#(end)$$

Street # (end)

$$Direction$$

Direction

$$StreetName$$

Street Name

$$StreetType$$

Street Type

$$UnitType$$

Unit Type

$$UnitStart$$

Unit # (start)

$$City$$

City

$$State$$

State

$$Zip$$

Zip Code

$$InspectionDistrict$$

Inspection District

$$Country$$

Country

$$StartFraction$$

Start Fraction

$$EndFraction$$

End Fraction

$$Prefix$$

Prefix

$$StreetSuffix$$

Street Suffix
Note:
Only use this parameter for the following Standard Choice values:

$$Unit#(end)$$

•

LONG_ADDRESS_NO_FORMAT

•

LONG_ADDRESS_WITH_FORMAT

•

SHORT_ADDRESS_NO_FORMAT

•

SHORT_ADDRESS_WITH_FORMAT

Unit # (end)

| Standard Choices Reference | 212

Parameter

Field

$$SecondaryRoad$$

Secondary Road

$$SecondaryRoadNumber$$

Secondary Road Number

$$NeighborhoodPrefix$$

Neighborhood Prefix

$$Neighborhood$$

Neighborhood

$$Description$$

Description

$$Distance$$

Distance

$$XCoordinator$$

X Coordinate

$$YCoordinator$$

Y Coordinate

$$InspectionDistrictPrefix$$

Inspection District Prefix

$$County$$

County

$$StreetAddress$$

Street Address

$$AddressLine1$$

Address Line 1

$$HouseNumberAlphaStart$$

House # Alpha (start)

$$HouseNumberAlphaEnd$$

House # Alpha (end)

$$LevelNumberStart$$

Level # (start)

$$LevelNumberEnd$$

Level # (end)

$$LevelPrefix$$

Level Prefix

$$AddressTypeFlag$$

Address Type Flag
Note:
Only use this parameter for the Standard Choice value
STANDARD_ADDRESS_FORMAT.

$$AddressLine2$$

Address Line 2

$$AddressType$$

Address Type
Note:
Only use this parameter for the following Standard Choice values:
•

LONG_ADDRESS_NO_FORMAT

•

LONG_ADDRESS_WITH_FORMAT

•

SHORT_ADDRESS_NO_FORMAT

•

SHORT_ADDRESS_WITH_FORMAT

I18N_SETTINGS
Product
Civic Platform, Citizen Access
Type
System Switch
Description
Configure this Standard Choice to enable all internationalization and localization features and manually
define currency and date formats in Civic Platform and Citizen Access.
Follow the steps in For Multiple Languages to set values for English and additional languages.

| Standard Choices Reference | 213

Table 95: I18N_SETTINGS Standard Choice Values
Standard Choice Values

Value Description

Description

I18N_DEFAULT_ LANGUAGE

Read-only

Once you set up internationalization and
localization in the multi-agency configuration,
the language you select for the Default
Language field is automatically populated
here.

I18N_SECOND_ LANGUAGE

Enter one of these values: ar_AE
(Arabic) en_AU (Australian
English) en_US (US English)

This value defines the second language for
the agency. If you set up a second language,
the WorkflowTask Detail portlet in Civic
Platform displays two Comments fields: one
is in the primary language and the other
in the second language. Citizen Access
(ACA) users can see the Comments field in
the language they choose from the Citizen
Access Login page if Civic Platform supports
this language.

CURRENCY_LOCALE

Enter one of these values
following the format in
I18N_DEFAULT_LANGUAGE
Value Desc: ar_AE (for Arabic),
en_AU (for Australian English),
en_US (for US English), es_MX
(for Mexico Spanish), and zh_TW
(for Traditional Chinese).

This value defines the currency for the
agency no matter which language a user
selects when he logs in. For example, the
en_US value represents the dollar currency
used in the United States; the ar_AE value
represents the dirham currency used in the
United Arab Emirates.You can set the default
language value to a different value than
the currency local. For example, you can
set the default language to es_MX, but set
the currency locale as en_US. That means
Spanish is the additional language, but the
US Dollar ($) is the currency symbol.

DATE_FORMAT

MM/dd/yyyy (default)yyyy/MM/dd.
dd/mm/yyyy.

This value specifies the date format for the
I18N_DEFAULT_LANGUAGE value. NOTE:
If an agency is providing multiple language
support and you need to define this date
format, yyyy/MM/dd, for your additional
language, see For Multiple Languages.

DATE_TIME_FORMAT

MM/dd/yyyy HH:mm:ss yyyy/MM/
dd HH:mm:ss.

This value defines how the date and
time format can display. The MM/dd/
yyyy represents the Month/day/year,
and the HH:mm:ss represents the
Hours:minutes:seconds. For example, July
26, 2011 at 6:20:16 a.m. could be formatted
to 07/26/2011 06:28:16.
Note:
If an agency is providing multiple
language support and you need to
define this date format, yyyy/MM/dd,
for your additional language then see
For Multiple Languages.

TIME_FORMAT

Enter the time in one of these four
patterns: HH:mm:ss tt, HH:mm
tt, HH:mm, or HH:mm:ss. For
example, HH:mm:ss tt represents
Hours:minutes:seconds AM(or
PM).

This value specifies the time format for
the agency, except that the inspection
functionality uses the format defined in
INSPECTION_TIME_FORMAT.

INSPECTION_TIME_ FORMAT

Enter the time in one of these four
patterns: HH:mm:ss tt, HH:mm
tt, HH:mm, or HH:mm:ss. For

This value defines the time format for the
inspection functionality only.

| Standard Choices Reference | 214

Standard Choice Values

Value Description
example, HH:mm:ss tt represents
Hours:minutes:seconds AM(or
PM).

Description

MULTI-LANGUAGE SUPPORT
ENABLE

This Value Desc is read-only. Yes,
No

When you configure internationalization in the
multi-agency configuration for Civic Platform
and Citizen Access, the value is automatically
filled with the “Yes” or “No” value.Yes enables
multiple language support. No disables
multiple language support.

HIDE_LANGUAGE_ OPTIONS

Yes, No

This value is only for the Civic Platform login
page. To hide the Language drop-down list
option, enter Yes in the Value Desc field. To
display the Language drop-down list option at
login, enter No in the field.

For Multiple Languages
Only DATE_FORMAT and DATE_TIME_FORMAT and support this alternate value in an additional
language. If an agency is providing multiple language support and you need to define this date format,
yyyy/MM/dd, for your additional language, then you must follow these unique steps. For example, if English
is your primary language and Chinese is the additional language, follow these steps:
1. Configure for English all of the I18N_SETTINGS values and Submit.
The I18N_SETTINGS page saves the values in English.
2. In the Language drop‑down list, switch to Chinese, for example, switch to Chinese. If Chinese is not yet
available in the drop-down list, then you need complete setting up I18N_SETTINGS and return to these
steps.
The I18N_SETTINGS page refreshes and displays the values you set in English. But, the page is
available for you to enter Values for DATE_FORMAT and DATE_TIME_FORMAT.
3. Enter the alternate supported Values of yyyy/MM/dd for both the DATE_FORMAT and
DATE_TIME_FORMAT and click Submit to save the values for Chinese.
Note:
The yyyy/MM/dd is the only other supported date format.

4. Switch the Language back to English from the drop‑down list and notice that the DATE_FORMAT is
different than what you set for Chinese.

INDIVIDUAL_CONTACT_MATCH_CRITERIA
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
To enable close-match searching, configure the following standard choices in the Standard Choices portlet
in the Setup Admin (Editing Standard Choices in the Setup Admin):
•

ENABLE_CONTACT_ADDRESS

| Standard Choices Reference | 215

•

INDIVIDUAL_CONTACT_MATCH_CRITERIA

•

ORGANIZATION_CONTACT_MATCH_CRITERIA

Close-match searching enables users to locate reference contacts that do not exactly match their search
criteria, but come close. The standard search function returns reference contacts that exactly match user’s
search criteria. In some cases, users might find that the search results do not include the contacts they
intend to find, for example, if the user mistypes the criteria. In that case, users can click the Close Matches
button to locate reference contacts that do not exactly match their search criteria, but come close.

Table 96: INDIVIDUAL_CONTACT_MATCH_CRITERIA Standard Choice Values
Value

Description

Criteria

Click the picker to select the contact fields as the matching criteria. If you select multiple
fields in one row, the system joins the fields by a logical AND. The system joins criteria in
different rows by a logical OR.
Note:
Civic Platform searches for close matches based on the criteria rows in which
every field has value, and disregards the criteria rows in which any field has no
value.

Priority

The priority determines the order of the matches found:Close matching contacts that meet
the criteria of a higher priority always display before those that meet the criteria of a lower
priority.In cases when only one match is necessary for subsequent processing, the close
matching contact that meets the criteria of the highest priority is the default one that Civic
Platform uses.

Active

Mark the check box to include this item on the list of Standard Choices.

INSPECTION_CATEGORY
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines inspection type categories. You can assign an inspection type to one
category or multiple categories.

| Standard Choices Reference | 216

The values you enter for this Standard Choice populate the Inspection Edit - Category List window.

INSPECTION_DISTRICT_ON_PARCEL
Product
Civic Platform
Type
System Switch
Description
This Standard Choice determines whether the Inspection District field displays on parcel pages. If the
Standard Choice is inactive, or its value is No, the field does not display on parcel pages.
Standard Choice values can include:
Yes
No

INSPECTION_RESULT_CSV_FORMAT
Product
Civic Platform and Citizen Access
Type
System Switch
Description
This Standard Choice defines the format of an inspection result CSV file. The Standard Choice
value specifies the columns in the CSV file. Make sure you enter the value exactly as Table 97:
INSPECTION_RESULT_CSV_FORMAT Standard Choice Values listed.
The value description defines attributes for a given column. Use any of the following attributes and
separate attributes with semicolons (;).
•

COLUMN=. Replace the attribute value with the actual format of the date and time. For
a list of attribute values that you can enter, see Table 98: Supported Date and Time Formats. For a
description of format specifiers, see Table 99: Date and Time Format Specifiers.

•

ORDER=
Value Desc:
minutes
hours
days
weeks

MEETING_REASON_COMMENT
Product
Civic Platform
Type
System Switch
Description
Replaces HEARING_REASON_COMMENT Standard Choice.
This Standard Choice determines the types of meeting reasons agency users can select, such as
Tax Hearing or Application Review. Agency users select a meeting reason for each application on a
meeting agenda. When you select a meeting reason, the comment associated with the meeting reason
automatically populates the Comment field.
Enter the meeting reason in the Standard Choices Value field and the meeting comment in the Value Desc
field. You can enter up to 30 characters in the Standard Choices Value field and up to 1024 characters in
the Value Description field.

MEETING_TYPE_STATUS_GROUP
Product
Civic Platform
Type
System Switch
Description
Replaces HEARING_TYPE_STATUS_GROUP Standard Choice.
This Standard Choice determines the types of meetings your agency conducts. For example, you might
create a different meeting status group for each commission in your agency’s planning and zoning division.
You might have a Housing Advisory and Appeals Board status group, a Land Use Appeals Board status
group, and a Planning Commission status group.
The values you enter for this Standard Choice populate the Status Group drop-down list. This drop-down
list displays in the Meeting Calendar Event Maintenance portlet. You can enter up to 30 characters in the
Standard Choices Value field.

| Standard Choices Reference | 230

MEETING_TYPE_STATUS_{Group Name}
Product
Civic Platform
Type
System Switch
Description
Replaces the HEARING_TYPE_STATUS_{GROUP Name} Standard Choice.
This Standard Choice determines the status values for each meeting status group. The
[STATUS_GROUP_NAME] portion of this Standard Choice is the name of the status group you configure
using the MEETING_TYPE_STATUS_GROUP Standard Choice. You can enter three different meeting
status values: APPROVED, PENDING, and DENIED.
The values you enter for this Standard Choice populate the Status drop-down list. Agency users can
access this drop-down list from the Meeting Calendar list portlet under the Item secondary tab.

MODULE_AUDIT_FREQUENCY
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the frequency of random audits at the module level. Enter any modules
for which you want to define a random audit frequency as a value, and enter the frequency, in number of
months, as the value description. To define audit frequency at the agency level, see RANDOM_AUDIT
Standard Choice.
Table 107: MODULE_AUDIT_FREQUENCY Standard Choice Values
Standard Choice Values

Value Desc

Description

Licensing

Enter X Months, where X
represents number of months. For
example, 2 Months

This value defines the frequency of random
audits in the licensing module.

Case Management

Enter X Months, where X
represents number of months. For
example, 6 Months

This value defines the frequency of random
audits in the case management module.

MULTIPLE_APO_GIS_SELECTION
Product
Civic Platform
Type
System Switch
Description
This Standard Choice enables the ability to select multiple APO or GIS data and attach them to a record.

| Standard Choices Reference | 231

Standard Choice values can include:
Yes. Turn the feature on.
No. Disable the feature.

MULTIPLE_LICENSE_PROFESSIONAL
Product
Civic Platform
Type
System Switch
Description
This Standard Choice gives agencies the option to associate more than one licensed professional with a
new application (single portlet entry and review form). Agencies can also set a primary professional, add
professionals, and remove professionals from the application.
Standard Choice values can include:
Yes

MULTI_SERVICE_SETTINGS
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice applies to multi-agency administration. The settings define which agency is the
super agency for the management of services from multiple agencies and provides the ability to lock a
service from licensed professionals or addresses by a condition.
Table 108: MULTI_SERVICE_SETTINGS Standard Choice Values
Standard Choice Values

Value Desc

Description

IS_SUPER_AGENCY

Yes, No

Set the value to Yes for the main agency
(super agency), and No for sub-agencies.
Citizen Access uses this value to determine if
the current agency is a super agency.

ALLOW_SERVICE_LOCK_
SEVERITY

Yes, No

Set the value to Yes to enable the ability to
lock services by condition. Civic Platform
provides a Service Lock option in the Severity
drop-down list in the conditions portlets for
licensed professionals and addresses.

AGENCY_LOGO_TYPE

This Value Desc must match the
value from the Standard Choice
LOGO_TYPE_CATEGORY.

This configuration matches the logo with the
agency and service. Citizen Access uses this
logo type to indicate which associated agency
logo to attach the service.

| Standard Choices Reference | 232

NEW_SPEAR_FORM_ENABLE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice gives agencies the option to use the redesigned single portlet entry and review form
available since Civic Platform 6.5.0 release. For additional information on the differences between the new
form and existing forms, see the Single Portlet Entry and Review Form (SPEAR) Implementation Technical
Bulletin and AA 6.5.0 Migration Document for SPEAR form Consolidation (07ACC-03396).pdf available
from Accela Customer Resource Center.
Standard Choice values can include:
Yes. Use the 6.5.0 application intake form.
No {or undefined}. Use the previous form that was implemented and designed prior to the Civic Platform
6.5.0 release.

ONE_INVOICE_FOR_ALL_CAPS
Product
Civic Platform
Type
System Switch
Description
To use the single invoice for multiple records functionality, you need to configure this Standard Choice.
When configuring this Standard Choice, you can select from three values: Yes, No, and Prompt.
This Standard Choice relates to sequence number generator for invoices. If the invoice mask uses
a variable which indicates different values for difference invoices, administrators must configure this
Standard Choice so Civic Platform can use this mask to generate invoices in batch.
Table 109: ONE_INVOICE_FOR_ALL_CAPS Standard Choice Values
Standard Choice Values

Value Desc

Description

Yes

RECTYPE-ALIAS:{Record
Type alias};RECTYPE-1:
{Group};RECTYPE-2:
{Type};RECTYPE-3:{sub
type};RECTYPE-4:{Category};
RECTYPE-MODULE:{model}

Create a single invoice number for all
selected records. If the value description
defines the fixed value of a variable which
indicates different values for different
invoices, Civic Platform can use this fixed
value to generate an invoice number for
multiple records.

No

-

Create a separate invoice number for each
selected record.

Prompt

RECTYPE-ALIAS:{Fixed Record
Type alias};RECTYPE-1:
{Fixed Group};RECTYPE-2:
{Type};RECTYPE-3:{Fixed
sub type};RECTYPE-4:{Fixed
Category};RECTYPE-MODULE:
{Fixed module name)

Display a prompt that allows the user to
choose whether or not to create a single
invoice for all selected records. If the value
description defines the fixed value of a
variable which indicates different values for
different invoices, Civic Platform displays
a dialog box that prompts users to choose

| Standard Choices Reference | 233

Standard Choice Values

Value Desc

Description
whether to use this fixed value to generate
an invoice number for multiple invoices or
generate an invoice number for each record
separately.

ONLINE_PAYMENT_MAX_AMOUNT
Product
Citizen Access
Type
System Switch
Description
This Standard Choice defines the maximum payment amount per transaction for each payment method. If
the value contains a module name, the payment limit applies to that module only. Otherwise, it applies to
all modules.
Accela recommends that administrators set the maximum payment amount within the limit that the
payment gateway allows payments. For example, if the payment gateway does not allow any payment over
300 dollars, enter “300” or a smaller number in the value description.
Standard Choices values include:
Check
_ Check
CreditCard
_ CreditCard
TrustAccount
_ TrustAccount
Note: The Standard Choice values are case-sensitive.
The Value Desc is the number indicating the maximum payment amount. For example: 500.

ONLINEPAYMENT_WEBSERVICE_URL
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice gives agencies the ability to accept payments online. This Standard Choice stores
the URL for the web service for the online payment.
Standard Choices values include:
{The URL of the Web service your agency uses to accept online payments, for example, http://
/portlets/services/OnlinePaymentWebService?wsdl.}

| Standard Choices Reference | 234

ORGANIZATION_CONTACT_MATCH_CRITERIA
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
To enable close-match searching, configure the following standard choices in the Standard Choices portlet
in the Setup Admin (Editing Standard Choices in the Setup Admin):
•

ENABLE_CONTACT_ADDRESS

•

INDIVIDUAL_CONTACT_MATCH_CRITERIA

•

ORGANIZATION_CONTACT_MATCH_CRITERIA

Close-match searching enables users to locate reference contacts that do not exactly match their search
criteria, but come close. The standard search function returns reference contacts that exactly match user’s
search criteria. In some cases, users might find that the search results do not include the contacts they
intend to find, for example, if the user mistypes the criteria. In that case, users can click the Close Matches
button to locate reference contacts that do not exactly match their search criteria, but come close.

Table 110: ORGANIZATION_CONTACT_MATCH_CRITERIA Standard Choice Values
Value

Description

Criteria

Click the picker to select the contact fields as the matching criteria. If you select multiple
fields in one row, the system joins the fields by a logical AND. The system joins criteria in
different rows by a logical OR.
Note:
Civic Platform searches for close matches based on the criteria rows in which
every field has value, and disregards the criteria rows in which any field has no
value.

Priority

The priority determines the order of the matches found:Close matching contacts that meet
the criteria of a higher priority always display before those that meet the criteria of a lower
priority.In cases when only one match is necessary for later-on processing, the close

| Standard Choices Reference | 235

Value

Description
matching contact that meets the criteria of the highest priority is the default one that Civic
Platform selects.

Active

Select to include this item on the list of Standard Choices.

PARCELSET_SCRIPT_LIST
Product
Civic Platform
Type
System Switch
Description
Allows EMSE scripts to execute on a parcel set. Enter the EMSE script name as the Standard Choices
value. Then, in the Value Desc field, enter the name to display in the drop-down list for this script.
Standard Choice values can include:
{EMSE Script Name}

PART_CALCULATE_TYPE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the formula options for calculating the costs of parts.
Standard Choice values can include:
LIFO. Stands for last-in, first-out, meaning that the most recently received items are issued/transferred/
adjusted/reserved first in transactions.
FIFO. Stands for first-in, first-out, meaning that the oldest inventory items are issued/transferred/adjusted/
reserved first in transactions.
Simple. The unit cost of inventory parts equals to the sum of the unit cost of the most recently received
items and the previous average unit cost, and divided by two.
Weighted. Similar to the Simple formula, but weighted by quantity.

PARTIAL_CAP_CONDITION_ENABLE
Product
Civic Platform
Type
System Switch
Description

| Standard Choices Reference | 236

This Standard Choice determines which step on the application intake form to display the conditions. When
enabled, this Standard Choice displays the conditions applied to partial applications in the pop-up window
for the application intake form.
Standard Choice values can include:
Partial CAP. The Condition pop-up window displays when the user clicks the partial application.
Fee Estimate. When users click the Fee Estimate button on the application intake form, the record
condition notice portlet embeds in the Fee Estimate form.

PARTIALLY_COMPLETED_CAP_PURGE_DAYS
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice, together with your settings for the CLEAREXPIREDINCOMPLETECAP script and
also the batch job for running the script, can periodically purge those partial applications that users Save
without Submitting in Civic Platform, or Save and Resume later in Citizen Access.
The Standard Choice value includes:
{Any numeric value, such as 90, that represents the number of days that partially completed applications
remain before Civic Platform removes the partial applications.}
For example, if today is April 1, 2008 and you set the value to 30 days, when the batch job runs and
executes the CLEAREXPIREDINCOMPLETECAP script, all the partial applications created on March
31, 2008 (which is day number 1 in counting) through March 2 remain in Civic Platform, and all partial
applications with a creation day of 31 (March 1, in this case) or earlier are purged.

PARTS_ALLOW_NEGATIVE_QUANTITY
Product
Civic Platform, Mobile Office
Type
System Switch
Description
This Standard Choice allows the quantity of a part inventory to be negative. Civic Platform sends an alert
message when a user attempts a part transaction that requests a quantity greater than the quantity on
hand.
Standard Choice values can include:
Yes {default}. Part inventory items can have a negative quantity.
No. Part inventory items cannot have a negative quantity.

PASSWORD_CALCULATION_SCORE
Product
Civic Platform

| Standard Choices Reference | 237

Type
System Switch
Description
This Standard Choice allows agencies modify the password strength calculation score. The Standard
Choice value descriptions must use the variables in Table 111: PASSWORD_CALCULATION_SCORE
Standard Choice Values.
Table 111: PASSWORD_CALCULATION_SCORE Standard Choice Values
Standard Choice Value

Value Desc

Number of Characters

+(n*4)

Repeated Characters

-(n*4)

Has 3 Number

+5

Has 2 Special Characters

+5

Has Upper and Lower Character

+10

Has Numbers and Characters

+15

Only Characters

-10

Only Numbers

-10

Weak Password

score<=34

Medium Password

34 < score <=34

Strong Password

68 < score

PASSWORD_POLICY_SETTINGS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice allows agencies to create new password policy settings, or to modify settings within
an existing password policy setting. You must set the policy settings with appropriate values according to
the Standard Choice values shown below. Use double pipes (||) to split standard value descriptions and a
colon (:) to split elements.
Table 112: PASSWORD_POLICY_SETTINGS Standard Choice Values
Standard Choice Value

Value Desc

Example_JavaBean1

JAVABEAN:com.accela.security.password.LengthValidator ||
length:8 || errorMessage: Password is too short.

Example_JavaBean2

JAVABEAN:com.accela.security.password.UpperCharValidator ||
number:2 || errorMessage: Password must contain uppercase.

Example_JavaBean3

JAVABEAN:com.accela.security.password.ExcludeUserIDValidator
|| errorMessage:Do not allow user id

Example_JavaBean4

JAVABEAN:com.accela.security.password.ExcludeUserIDValidator
|| number:5 || errorMessage:Do not allow previous password.

Example_WS

WS: https://bridgeview.org:3080/CheckACAPolicy?wsdl ||
errorMessage: check policy failed.

| Standard Choices Reference | 238

PAYMENT_CREDITCARD_TYPE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the acceptable credit card types. When accepting credit card payments,
cashiers can use magnetic card reader to automatically read credit card information into Civic Platform, or
manually enter the information.
Standard Choice values can include:
MasterCard
American Express
Visa
Discover
Diner’s Club

PAYMENT_CHECK_ACCOUNT_TYPE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the acceptable check account types.
Table 113: PAYMENT_CHECK_ACCOUNT_TYPE Standard Choice Values
Standard Choice Value

Value Desc

Checking

C

Savings

S

Business Checking

BC

Business Savings

BS

PAYMENT_CHECK_TYPE
Product
Civic Platform
Type
System Switch
Description

| Standard Choices Reference | 239

This Standard Choice allows agencies to take payments from electronic checks and from account debit
cards. After you create this Standard Choice, you can accept electronic checks and accept account debit
cards.
Standard Choice values can include:
Account Debit
Electronic Check

PAYMENT_GROUP
Product
Citizen Access
Type
System Switch
Description
This Standard Choice defines one service fee structure for each module in Citizen Access. This provides
the flexibility to use service fee structure for one module and to use another service fee structure for
another module. For the modules that are assigned to the same service fee structure, their record fees
can be paid together in a shopping cart as a single transaction. For the modules are assigned to different
service fee structures, their record fees need to be paid separately by module. Currently only OPC
CoBrand Plus supports this feature. For other payment gateways, they only support one service fee
structure for all modules; the configuration on this Standard Choice does not work for them.
Standard Choice values may include:
{Enter the module name, such as Building, Licenses, and so forth.}
Building
Licenses
Value Desc:
{Enter the fee structure number that the third-party payment gateway provider provides.}

PAYMENT_PROCESSING_DEFAULT_METHOD
Product
Civic Platform
Type
System Switch
Description
Use this Standard Choice to set the default payment method for the current user ID. If you do not define
this Standard Choice, Civic Platform uses cash as the payment method.

| Standard Choices Reference | 240

Standard Choice values include:
{Enter the current User’s ID.}
Value Desc
{Provide the default payment method, for example, Debit Card.}

PAYMENT_PROCESSING_METHOD
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the payment methods for each module. If you do not configure this Standard
Choice, Civic Platform provides all available payment methods.
Configure this Standard Choice to display each module’s acceptable payment methods in the Payment
Method drop‑down list. Specify the module in the Standard Choices value field and all acceptable payment
methods in the Value Desc field.

Standard Choice values can include:
{Enter the module names. For example, Building, Licenses, and so forth.}
Value Description:
{Enter a comma delimited list from 17 acceptable payment methods.}
ATM, Billed, Cash, Check, Coupon, Credit Card, Debit Card, Internal Transfer, Journal Entry, Misc Credit,
Money Order, Multiple Tenders, Other, Trust Account, Waiver, Write Off, Lockbox

| Standard Choices Reference | 241

PAYMENT_PROCESSING_RECORD_RECEIPT
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the receipt mask to use in the Payment Processing portlet.
•

If you set the Standard Choice value to Record, all records in the Payment Processing portlet use their
own record receipt mask for the receipt number generation.

•

If you set the Standard Choice value to Payment Processing or null, and you define the PP-Receipt
mask in the sequence generator administration tool, the Payment Processing portlet uses a customized
receipt mask (according to the PP-Receipt mask definition) for each payment, which can involve one or
more records.

•

If you set the Standard Choice value to Payment Processing or null, and you do not define the PPReceipt mask in the sequence generator administration tool, the Payment Processing portlet uses an
agency-generated receipt mask for each payment, which can involve one or more records.

Standard Choice values can include:
Record
Payment Processing

PAYMENT_RECEIVED_TYPE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the value options for the Received drop-down list field on all payment
locations in Civic Platform, and the value options for the Refunded drop-down list field on the Refund page.
The Received or Refunded field displays the manner in which Civic Platform received the payment.
Standard Choice values can include:
In Person
Mail
Fax

PAYMENT_REMITTER_CONTACT_TYPE
Product
Civic Platform
Type

| Standard Choices Reference | 242

System Switch
Description
This Standard Choice defines a “remitter” contact type, which displays on the check endorsement page.
Set the value of this Standard Choice to a valid contact type, for example, Applicant.
An administrator must map this Standard Choice value to an existing contact type, which you define in the
Standard Choice CONTACT_TYPE.

PENALTY_FEE_FUNC
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines possible penalty fee recalculation methods used in batch processing
licenses.
Standard Choice values can include:
None
Percentage
Simple

PENALTY_INTERVAL_UNITS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the interval units used to set up the renewal information in licensing.
Standard Choice values can include:
Days
Months
Years

PHONE_NUMBER_IDD
Product
Civic Platform, Citizen Access
Type
System Switch
Description

| Standard Choices Reference | 243

This Standard Choice defines phone number country codes. The addition of country codes allows agencies
to associate international phone and fax numbers with application contacts, licensed professionals,
owners, or public users.
The Standard Choice values listed below correspond to the Standard Choice values for COUNTRY.
Table 114: PHONE_NUMBER_IDD Standard Choice Values
Standard Choice Value

Value Desc

Description

AL

355

Albania

DZ

213

Algeria

AS

684

American Samoa

AD

376

Andorra

AO

244

Angola

AQ

672

Antarctica

AR

54

Argentina

AM

374

Armenia

AW

297

Aruba

AU

61

Australia

AT

43

Austria

AZ

994

Azerbaijan

BH

973

Bahrain

BD

880

Bangladesh

BY

375

Belarus

BE

32

Belgium

BZ

501

Belize

BJ

229

Benin

BT

975

Bhutan

BO

591

Bolivia

BA

387

Bosnia and Herzegovina

BW

267

Botswana

BR

55

Brazil

BN

673

Brunei

BG

359

Bulgaria

BF

226

Burkina Faso

BI

257

Burundi

KH

855

Cambodia

CM

237

Cameroon

CA

1

Canada

CV

238

Cape Verde

CF

236

Central African Republic

TD

235

Chad

CL

56

Chile

CN

86

China

CC

61

Cocos Islands

CO

57

Colombia

| Standard Choices Reference | 244

Standard Choice Value

Value Desc

Description

KM

269

Comoros

CG

242

Congo

CK

682

Cook Islands

CR

506

Costa Rica

HR

385

Croatia

CU

53

Cuba

CY

357

Cyprus

CZ

420

Czech Republic

CI

225

Cote d’Ivoire (Ivory Coast)

DK

45

Denmark

DJ

253

Djibouti

EC

593

Ecuador

EG

20

Egypt

SV

503

El Salvador

GQ

240

Equatorial Guinea

ER

291

Eritrea

EE

372

Estonia

ET

251

Ethiopia

FK

500

Falkland Islands

FO

298

Faroe Islands

FJ

679

Fiji

FI

358

Finland

FR

33

France

GF

594

French Guiana

PF

689

French Polynesia

GA

241

Gabon

GM

220

Gambia

GE

995

Georgia

DE

49

Germany

GH

233

Ghana

GI

350

Gibraltar

GR

30

Greece

GL

299

Greenland

GP

590

Guadeloupe

GT

502

Guatemala

GN

224

Guinea

GW

245

Guinea-Bissau

GY

592

Guyana

HT

509

Haiti

HN

504

Honduras

HK

852

Hong Kong

| Standard Choices Reference | 245

Standard Choice Value

Value Desc

Description

HU

36

Hungary

IS

354

Iceland

IN

91

India

ID

62

Indonesia

IR

98

Iran

IQ

964

Iraq

IE

353

Ireland

IL

972

Israel

IT

39

Italy

JP

81

Japan

JO

962

Jordan

KZ

7

Kazakhstan

KE

254

Kenya

KI

686

Kiribati

KP

850

North Korea

KR

82

South Korea

KW

965

Kuwait

KG

996

Kyrgyzstan

LA

856

Laos

LV

371

Latvia

LB

961

Lebanon

LS

266

Lesotho

LR

231

Liberia

LY

218

Libya

LI

423

Liechtenstein

LT

370

Lithuania

LU

352

Luxembourg

MO

853

Macao

MK

389

Macedonia

MG

261

Madagascar

MW

265

Malawi

MY

60

Malaysia

MV

960

Maldives

ML

223

Mali

MT

356

Malta

MH

692

Marshall Islands

MQ

596

Martinique

MR

222

Mauritania

MU

230

Mauritius

YT

269

Mayotte

MX

52

Mexico

| Standard Choices Reference | 246

Standard Choice Value

Value Desc

Description

FM

691

Micronesia

MD

373

Moldova

MC

377

Monaco

MS

976

Montserrat

MA

212

Morocco

MZ

258

Mozambique

NA

264

Namibia

NR

674

Nauru

NP

977

Nepal

NL

31

Netherlands

AN

599

Netherlands Antilles

NC

687

New Caledonia

NZ

64

New Zealand

NI

505

Nicaragua

NG

234

Nigeria

NU

683

Niue

NF

672

Norfolk Island

NO

47

Norway

OM

968

Oman

PK

92

Pakistan

PW

680

Palau

PS

970

Palestine

PA

507

Panama

PG

675

Papua New Guinea

PY

595

Paraguay

PE

51

Peru

PH

63

Philippines

PN

48

Pitcairn

PT

351

Portugal

QA

974

Qatar

RE

262

Reunion

RO

40

Romania

RU

7

Russia

RW

250

Rwanda

SH

290

Saint Helena

SM

378

San Marino

ST

239

Sao Tome and Principe

SA

966

Saudi Arabia

SN

221

Senegal

CS

381

Serbia and Montenegro

SC

248

Seychelles

| Standard Choices Reference | 247

Standard Choice Value

Value Desc

Description

SK

421

Slovakia

SB

677

Solomon Islands

SO

252

Somalia

ZA

27

South Africa

ES

34

Spain

LK

94

Sri Lanka

SD

249

Sudan

SR

597

Suriname

SZ

268

Swaziland

SE

46

Sweden

CH

41

Switzerland

SY

963

Syria

TW

886

Taiwan

TJ

992

Tajikistan

TZ

255

Tanzania

TH

66

Thailand

TG

228

Togo

TK

690

Tokelau

TO

676

Tonga

TN

216

Tunisia

TR

90

Turkey

TM

993

Turkmenistan

TV

688

Tuvalu

UG

256

Uganda

UA

380

Ukraine

AE

971

United Arab Emirates

US

1

United States

UY

598

Uruguay

UZ

998

Uzbekistan

VU

678

Vanuatu

VN

84

Vietnam

WF

681

Wallis and Futuna

EH

685

Western Sahara

YE

967

Yemen

ZW

263

Zimbabwe

PHONE_NUMBER_IDD_ENABLE
This Standard Choice expands the phone and fax number fields to allow users to enter a country
code. Once you enable this Standard Choice, you must enable and add values to the Standard Choice
PHONE_NUMBER_IDD. When these two Standard Choices are configured, Civic Platform and Citizen

| Standard Choices Reference | 248

Access auto-populate the phone number Country Code field once a Country is selected from the Country
drop-down list.
Standard Choice values may include:
Yes
No

POINT_OF_SALE_FEE_SCHEDULE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice allows an agency to specify the fee schedule category that you want to apply to point
of sale items. Use the Value and Value Desc fields to relate a fee item and to a specific fee schedule.
Note:
Before you set the Value for this Standard Choice you must have a fee schedule you can apply to point of
sale items. The POINT_OF_SALE_FEE_SCHEDULE Value and Value Desc fields associate a fee item to a
specific fee schedule.The Value Desc field must match the fee schedule name description exactly.

Standard Choice values can include:
 _ is the point of sale type that you define in
POINT_OF_SALE_TYPE and  is the Accela module for which you want to provide point of
sale items, Food_Building or Clothing_AMS, for example.
Note:
Create Standard Choice values for each Accela module that requires the point of sale feature.

Value Desc:
 can contain multiple comma delimited fee schedules;
POSFeeSchedule1, POSFeeScheduleBLDG, for example.
The following, in the Point of Sale Payment portlet, shows the Food point of sale item in the POS Type
drop-down list. The user applies the Food point of sale item to the BLD_WS fee schedule.

POINT_OF_SALE_TYPE
Product

| Standard Choices Reference | 249

Civic Platform
Type
System Switch
Description
The Standard Choice provides an agency with a way to customize a unique record ID for different values
in the Value Desc field. You configure this Standard Choice differently for Accela-hosted and on-premise
deployments.
Standard Choices value:
{Set the POINT_OF_SALE_TYPE value by entering each general type of fee item you want to apply a fee
to when making a point of sale. Create one value for each type of fee item. For example, values might be
Food, Clothing, or Media.}
Value Desc (for Accela-hosted deployments):
USER=Internal;CapID=.  is a dummy record ID. For example, you can
set the Value Desc to: USER=Internal;CapID=10FDD-00000-#0001.
Note:
Civic Platform uses the dummy record ID as a placeholder to enable point of sale functionality, the dummy
record ID does not display to any Civic Platform users.

Value Desc (for on-premise deployments)
USER=Public;CapID=. If on-premise sites need to enter a customizable record ID that applies
a dummy record ID for each fee item value, then  must follow the format of xxxxx-xxxxx-#xxxx
where xxxx can be any alphanumeric value. For example, if Media is the value, then the Value Desc field
might look like this: USER=Public;CapID=10POS-0000-#0000.

POPULATE_CURRENT_USER_TO_APPLICANT
Product
Civic Platform
Type
System Switch
Description
Each module listed populates the current user as the applicant in the Single Portlet Entry and Renewal
form in Citizen Access.
Standard Choice values can include:
{Each value must be one of the modules, spelled exactly as it appears in the module drop-down list in Civic
Platform.}

PRIORITY
Product
Civic Platform
Type
System Switch
Description
Based on your agency requirements, specify the priority levels to appear in the Priority field.

| Standard Choices Reference | 250

Standard Choice values can include:
1
2
3

PRODUCTION_UNIT_TYPE
Product
Civic Platform, Mobile Office
Type
System Switch
Description
Specifies choice values for the Unit of Production Field drop-down list used for tracking work order
production.
Standard Choice values can include:
Each
Feet
Acres
Miles

PROFESSIONALSET_SCRIPT_LIST
Product
Civic Platform
Type
System Switch
Description
Allows you to execute EMSE scripts on a licensed professional set. Enter the EMSE Script Name as the
Standard Choices value. Then, in the Value Desc field, enter the name to display in the drop-down list for
this script.
Standard Choice values can include:
{EMSE Script Name}

| Standard Choices Reference | 251

PROX_ALERT_ACTION
Product
Civic Platform
Type
System Switch
Description
This Standard Choice is required for proximity alerts to function.
Standard Choice values can include:
Acknowledged
Ignore
You must add both values separately.

PROXIMITY ALERT DISPLAY GIS map viewer
Product
Civic Platform, GIS
Type
System Switch
Description
After you add the Standard Choice, when a proximity alert is activated, the GIS map viewer displays with
the GIS objects associated with the application. This occurs after Civic Platform assigns an action to and
saves all proximity alerts in a workflow task.
Standard Choice values can include:
Do not enter a value for this Standard Choices item.

RACE
Product
Civic Platform, Mobile Office
Type
System Switch
Description
The Standard Choice defines a list of race options that users can select for contacts.
Standard Choice values can include:
Black
White
Brown
Yellow

| Standard Choices Reference | 252

RANDOM_AUDIT
Product
Civic Platform
Type
System Switch
Description
This Standard Choice allows you to configure the random audit functionality.
Table 115: RANDOM_AUDIT Standard Choice Values
Standard Choice Values

Value Desc

Description

AUDIT_MAXIMUM_RESULT

Any numerical value up to 50,000.
Default: 50,000

This value specifies the maximum number of
records that can be part of the audit set.

AUDIT_FREQUENCY

X Months (where X represents
number of months) For example:2
Months

This value defines the audit frequency (in
number of months) at the agency level. To
define audit frequency at the module level,
see MODULE_AUDIT_FREQUENCY.

AGENCY_EMAIL_ ADDRESS

Additional e-mail address(es) that The report is automatically sent to the email
you want to blind courtesy copy the addresses specified in the record contacts
report to.
or Report Manager. You can blind courtesy
copy (bcc) it to additional addresses. The
default From email address is the agency
administrator’s address.

REASON_FOR_RESCHEDULING_CANCELLING_EXAMINATION
Product
Civic Platform, Citizen Access
Type
System Switch
Description
The Standard Choice defines the reasons users must give to reschedule an examination or cancel an
exam. For example, enter “Need to transfer to a bigger room to hold more students.” to the Value field as a
reason. If you do not define a reason, users cannot reschedule or cancel an exam.

RECENTLY_HISTORY_SIZE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls the number of items that display in the Recently Viewed drop-down list
when users click the Navigation button on the toolbar. Default value is 10.

| Standard Choices Reference | 253

Recently Viewed displays various types of content. When hovering over the item identification number,
hover text displays what type of data element it is. For example, Record or Contact.

REF_ADDRESS_TYPE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the value options for the reference address type. Use this Standard Choice
for the reference address in conjunction with FID 0276-Address Type Group and FID 0277-Address Type
for the reference address (when enabled).
Super agency administrators must configure this Standard Choice to enable the creation of records and
services with external addresses.
Standard Choice values can include:
Asset Address
Parcel Address
Right of Way
Street Row

REFERENCE_CONTACT_RELATIONSHIP
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the value options in the current/target contact role drop-down list that users
can select when associating a reference contact with another one. The two reference contacts can be two
organization contacts, or two individual contacts, or one individual contact and one organization contact.
You can go to the Standard Choices portlet in the Setup Admin, select the Standard Choice under the
Contact tree node, and define the Standard Choice values.

| Standard Choices Reference | 254

Table 116: REFERENCE_CONTACT_RELATIONSHIP Standard Choice Values
Value

Description

Contact Role Contact
Role en_US

Define the possible contact roles, including the current contact role and target contact
role, that reference contacts can play when users configure their association relationship.

Active

Mark the check box to include this item on the list of Standard Choices.

REFUND_PAYMENT_REASON
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines all possible options in the Reason field that users can select when refunding
payments. You can enter each possible reason as a Standard Choice value.

REGIONAL MODIFIER
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the value options for the regional modifier.
Standard Choice values can include:
1
1.5
2.0

| Standard Choices Reference | 255

RELATED_CAP_SUMMARY
Product
Civic Platform
Type
System Switch
Description
This Standard Choice determines whether the record summary displays on the Renewal tab, Related
Records tab, or both.
Standard Choice values can include:
Related
Renewal
Value Desc:
Yes

RELATED_RECORDS_DEFAULT_VIEW
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the default view mode of the Related Records tab as either tree view or list
view. The Related Records tab displays in the default view mode, when opened the first time. Users can
switch between the two view modes.
Standard Choice values can include:
TreeView {Default}
ListView

RELATED_CAP_CONFIG
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls the display of the Related Record section and the tree view of the Related
Records tab.
Table 117: RELATED_CAP_CONFIG Standard Choice Values
Standard Choice Value

Value Desc

Description

DISABLE_IN_EDIT_RECORD_
BY_SINGLE_FORM

Yes, No

If you set the value to Yes, the Related
Record section does not display in the Edit

| Standard Choices Reference | 256

Standard Choice Value

Value Desc

Description
Record By Single Form which opens when
users click the Summary button for a record.
If you set the value to No, the Related
Records section displays in the Edit Record
By Single Form which opens when users click
the Summary button for a record.
Note:
This Standard Choice value does
not affect the Edit Record By Single
Form that opens for a partial record.

DISPLAY_CONFIG

{List field names in pairs of dollar
signs.} $ALTERNATE_CAP_ID
$ [$CAP_TYPE$]$CAP_
SUBMITTED_DATE$
$APPLICATION_NAME$

The value defines the fields that show in the
Related Records tree view.

REMOVE_PAY_FEE
Product
Citizen Access
Type
System Switch
Description
This Standard Choice controls the display of the Pay Fee link from the Fees section of the Record Detail
page and the Status column on the Record List page.
Standard Choices values include:
Yes. Removes the Pay Fee link from view.
No. Displays the Pay Fee link when your agency supports online payment processing.

REMOVE_REQUIRED_IN_ADMIN_CONDITIONS
Product
Civic Platform
Type
System Switch
Description
When administrators add or manage conditions (including conditions of approval and general conditions) in
Civic Platform, this Standard Choice controls whether Required displays as an option in the Severity field
of the conditions.
Standard Choice values are:
Conditions of Approval
Conditions
Value Descriptions:
Yes. The Required option is not available for the operations listed in Table 118: Operations Affected by
REMOVE_REQUIRED_IN_ADMIN_CONDITIONS.

| Standard Choices Reference | 257

No. The Required option is available for the operations listed in the table.
Table 118: Operations Affected by REMOVE_REQUIRED_IN_ADMIN_CONDITIONS
Portlet or Tab

Operation

Condition Maintenance portlet

Any condition-related operation. See Figure 13:
Severity Field in the Condition Maintenance Portlet
for an example.

Reference APO (address, parcel, or owner) portlet > Condition
tabReference Professional portlet > Condition tab

Any condition-related operation

Set portlet > Address, Parcel, or Professional tab > Conditions
tab

Any condition-related operation

Set portlet > Record tab > Condition of Approval, or Conditions
tab

Adds a standard condition

Record (including Building, Planning...), or Inspections portlet >
Condition of Approval or Conditions tab

Adds standard condition

Record (including Building, Planning...) portlet > Related
Record tab

Looks up records. Selects conditions (general
conditions, inspection conditions, or conditions of
approval) to copy when cloning or copying a record.
See Figure 14: Select Conditions to Copy Dialog
for an example.
Note:
If the Required option does not display
in the Select Conditions to Copy dialog,
but you disable the Standard Choice
REMOVE_REQUIRED_IN_DAILY_CONDITIONS,
Civic Platform selects the required
conditions to copy by default.

Figure 13: Severity Field in the Condition Maintenance Portlet

| Standard Choices Reference | 258

Figure 14: Select Conditions to Copy Dialog

REMOVE_REQUIRED_IN_DAILY_CONDITIONS
Product
Civic Platform
Type
System Switch
Description
When users add or manage conditions (including conditions of approval and general conditions) in Civic
Platform, this Standard Choice controls whether Required displays as an option in the Severity field of the
conditions.
You can set this configuration for each module, Building for example.
Standard Choice values can include:
Building
License
Enforcement
Value Descriptions:
Yes. When users work in the specified module, the Required option is not available for the operations
listed in Table 119: Operations Affected by REMOVE_REQUIRED_IN_DAILY_CONDITIONS.
No. When users work in the specified module, the Required option is available for the operations listed in
the table.
Table 119: Operations Affected by REMOVE_REQUIRED_IN_DAILY_CONDITIONS
Portlet or Tab

Operation

Record (including Building, Planning...), or Inspections portlet Creates a daily conditionSee Figure 15: Severity Field
> Condition of Approval or Condition tab
in the Add Condition Portlet for an example.
Record > Condition Notice window

View the details of a condition

Set portlet > Record tab > Condition of Approval, or
Conditions tab

Creates a daily condition

| Standard Choices Reference | 259

Figure 15: Severity Field in the Add Condition Portlet

REPORT_CRITERIA_LANGUAGE
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice defines the available reporting languages. A language abbreviation is listed as the
Standard Choice value, and the language name is listed as the Standard Choice value description.
Standard Choice values may include:
AR (Arabic)
EN (English)

REPORTS FROM GIS OBJECTS
Product
Civic Platform, GIS
Type
System Switch
Description
This Standard Choice enables users to run reports based on GIS object sets.
Standard Choice values can include:
{Enter the applicable report string. This is not the actual report, but a reference to the report.}

| Standard Choices Reference | 260

REPRINT_REASONS
Product
Citizen Access
Type
System Switch
Description
This Standard Choice defines the possible reasons for authorized agents or clerks to select when they
want to reprint a license tag in Citizen Access.
Standard Choice values include:
{Enter any reprint reason. For example, Out of Ink.}

ROUTE_OPTIMIZER_PROVIDER
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the approach to integrating the third-party route optimizer. For detailed
integration instructions, see “Configuring Inspection Route Sheets” in the Inspections chapter of the Civic
Platform Administrator Guide.
Table 120: ROUTE_OPTIMIZER_PROVIDER Standard Choice Values
Standard Choice Value

Value Description

Description

type

jar

className

Enter your class name. For example,
gov.agencyname.route.RouteOptimizer

When your agency integrates a thirdparty route optimizer by way of a jar
package, you must add these values
and value descriptions.

type

restful

url

Enter your restful url excluding parameters.
For example,http://www.bridgeview.gov/
restful/route

When your agency integrates a thirdparty route optimizer through REST
API, you must add these values and
value descriptions.

SALUTATION
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice allows users to enter professional or social titles for contacts and licensed
professionals, such as Mr., Mrs., or Dr. Salutations must be 10 or fewer characters. The Standard Choice
values populate in the Salutation drop-down list in the Contact, Licensed Professional, and Record portlets.

| Standard Choices Reference | 261

Standard Choice values include:
Mr.
Mrs.
Ms.
Dr.
Prof.

SESSION_TIMEOUT
Product
Civic Platform
Type
System Switch
Description
This Standard Choice specifies the session time-out value (in seconds) at the agency level and overrides
the session time-out setting at the web server level.
Administrators can configure whether to display a session time-out warning to users, to warn that the
session is timing out. Users can select Yes in the time-out warning to restart the session.
Table 121: SESSION_TIMEOUT Standard Choice Values
Standard Choice Values

Value Description

Description

TIMEOUT

Enter a number (of seconds).
Default:7200.

The value defines the time period after which
a Civic Platform session with no activity
times out. If you specify a value less than
600 seconds, Civic Platform automatically
enforces a session time-out period of 10
minutes.

TIMEOUT WARNING

Enter a number (of seconds).
Default:120.

This value defines the advance time in
seconds to pop up the session time-out
warning.

SG-PERCENTAGE_ EXCLUDE_ INVOICED_ FEE
Product
Civic Platform
Type
System Switch
Description
When users add a fee item with the SG-PERCENTAGE calc formula to a record, Civic Platform calculates
its fee based on the sum of the other fee items that belong to the same subgroup in the record. This
Standard Choice defines whether to include all the fee items in the sum, or the fee items of the New status
only, and also determines whether users can recalculate an “Invoiced” fee item of the SG-PERCENTAGE
calc formula.
Standard Choice values include:
Yes. Civic Platform calculates the fee with the SG-PERCENTAGE calc formula based on the sum of the
other fee items of the New Status that belong to the same subgroup. Besides, when users recalculate the

| Standard Choices Reference | 262

fees in a record, if the fee item of the SG-PERCENTAGE formula is in the Invoiced status, the recalculation
does not change the value of the fee item.
No {Default}. Civic Platform calculates the fee based on the sum of all the other fee items that belong to
the same subgroup. Besides, users can recalculate the fee item of the SG-PERCENTAGE formula even if
the fee item is in the Invoiced status.

SINGLE_INVOICE_REPORT
Product
Civic Platform
Type
System Switch
Description
Administrators select this Standard Choice to indicate whether to enable a single invoice report.
Standard Choice values include:
{Specify the report name.}

SOCIAL_MEDIA_SETTINGS
Product
Civic Platform
Type
System Switch
Description
If you want to customize the application name (instead of “Civic Platform”) displayed under the tweets, use
this Standard Choice to register the consumer key and consumer secret you get from the Twitter site for
the customized application.
Standard Choice values include:
TWITTER
Value Desc:
CONSUMER_KEY=<***** > ,CONSUMER_SECRET=<*****. Replace <*****> with the actual consumer key
and consumer secret strings.

SPELL_CHECKER_ENABLED
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls the Spell Checker.
Standard Choice values include:
Yes. The Spell Checker is available for use in Civic Platform.

| Standard Choices Reference | 263

No. The Speck Checker is not available.

STANDARD_WEB_FONTS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice enables custom fonts in the APO Form Layout Editor, ASI Form Layout Editor, Asset
Form Layout Editor, and TSI Form Layout Editor. Civic Platform populates the choices in the Font dropdown list in the Properties window.

Standard Choice values can include:
Andale Mono
Arial
Comic Sans MS
Courier New
Georgia
Impact
Times New Roman
Trebuchet MS
Verdana
Webdings

STATES
Product
Citizen Access
Type
System Switch
Description
This Standard Choice populates the drop-down list of states. The Standard Choices values are the state
names, such as California, Florida, Texas, or New York. You may run a script to populate all 50 states for
this drop-down list.

| Standard Choices Reference | 264

STATUS_OF_CONDITIONS_OF_APPROVAL
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
This Standard Choice defines the status for conditions of approval. You define the Standard Choice values
as the options in the status field for a condition of approval.
Standard Choice values can include:
{Enter a status names in each row.}
Pending
Met
Value Descriptions:
{Enter the status type Applied or Not Applied.}
Applied
Not Applied

STREET DIRECTIONS
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
This Standard Choice populates the drop-down list of street directions. The Standard Choices values are
the directions, such as North, South, East, West, N, S, E, W, NE, NW, SE, SW.

STREET SUFFIXES
Product
Civic Platform, Citizen Access, Mobile Office
Type
System Switch
Description
This Standard Choice populates the drop-down list of street suffixes.
Standard Choice values can include:
Ave
Cir
Way

| Standard Choices Reference | 265

STRUCTURETYPE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice populates the drop-down list of the structure type.
Standard Choice values can include:
Primary
Secondary
Canal
Mall

STRUCTURE_APO_ASSOCIATION
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls the auto‑association of APO data when you associate an establishment with
a structure.
Standard Choice values include:
Address
Establishment
Owner
Parcel
Structure
Value Desc:
Yes: Civic Platform automatically associates the object.
No: Civic Platform does not automatically associate the object.
Prompt: Civic Platform prompts the user to associate any related objects.

STRUCTURE_CAP_ASSOCIATION
Product
Civic Platform
Type
System Switch
Description

| Standard Choices Reference | 266

This Standard Choice controls the automatic association of establishment, structure, and APO data to an
application intake form when you search for an address, parcel, owner, structure, or establishment.
Standard Choice values include:
Address
Establishment
Owner
Parcel
Structure
Value Descriptions:
Yes: Civic Platform automatically associates any related objects.
No: Civic Platform does not automatically associate the object.
Prompt: Civic Platform prompts users to associate related objects, if any.

STRUCTURE_ESTABLISHMENT_APO_ASSOCIATION
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls the auto‑association of APO data to existing associated establishments
when you associate APO data with their parent structure.
Standard Choice values include:
Address
Establishment
Owner
Parcel
Structure
Value Description:
Yes: Civic Platform automatically associates the object.
No: Civic Platform does not automatically associate the object.
Prompt: Civic Platform prompts the user to associate any related objects.

STRUCTURE_ESTABLISHMENT_LAND_USE
Product
Civic Platform
Type
System Switch
Description
This Standard Choice determines the land use values for structures and establishments.
Standard Choice values can include:
Commercial

| Standard Choices Reference | 267

Residential

STRUCTURE_ESTABLISHMENT_STATUS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice determines the structure and establishment status values.
Standard Choice values can include:
Existing
Proposed

TEMPLATE_EMSE_DROPDOWN
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice controls the ability to populate licensed professional template field information by
calling an external web service and publishing the data to the field.
Standard Choice values:
ENABLE_EMSE
Value Description:
Yes. Enables the EMSE web service functionality.
No. Disables EMSE web service functionality. The default value is No.

TEMPLATE_TEXT_PARAMS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines agency-specific parameters that administrators can apply to display text
in text settings. The Standard Choice value defines the parameter name, and the Value Desc defines
the parameter value. If the display text contains the parameter name surrounded by the “$$” signs in text
settings, the parameter value appears on the interface where the text settings are applicable.

| Standard Choices Reference | 268

TIME_ACCOUNTING_SETTINGS
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls whether the Equipment/Materials section is available for users to add
equipment and material cost when creating a time accounting record.
Standard Choice values can include:
ENABLE_EQUIPMENT_LIST
Value Desc:
Yes. The Equipment/Materials section displays in the time accounting new form only when the Standard
Choice Value ENABLE_EQUIPMENT_LIST = Yes.

TIME_MODULES
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls the drop‑down menu that displays beside the time in Structures and
Establishments records and indicates whether the time is a.m. or p.m.
Standard Choice values can include:
a.m.
p.m.

TRUST_ACCOUNT_ADMINISTRATOR
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the trust account administrator name and the email address for sending
notifications regarding trust accounts. For example, you can set up a threshold amount in a trust account
and automatically send a notification to the trust account administrator if the trust account balance falls
below that threshold.
To set up a trust account receipt and an email notification for a low threshold amount, you must also
configure the Content Customize function (0184-Admin Content Customization). Civic Platform sends
email notifications to all email IDs listed in the Value Desc fields.
Standard Choice value can include:

| Standard Choices Reference | 269

{Enter the trust account administrator’s name, in the form of Firstname Lastname, for example: Rocky
Miyagi.}
Value Description:
{Enter the trust account administrator’s email address, for example: Rocky.Miyagi@CityOfOakland.net.}

TRUST_ACCOUNT_ONLY
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls the ability to display a prompt so a user can choose to pay with a trust
account or an alternative payment method.
Standard Choice values include:
Yes. Pays with a trust account only.
No. Provides the prompt to pay using an alternative payment method.

UNIT DESC
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the value options for the types of workloads to use.
Standard Choice values can include:
Hours Worked
Pages Copied

UNIT TYPES
Product
Citizen Access
Type
System Switch
Description
This Standard Choice populates the drop-down list in the Unit Type field in ACA.
Standard Choices values may include:
Apt.
Building
Suite

| Standard Choices Reference | 270

Unit

UPDATE_REFERENCE_CONDITION
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines the reference condition configuration. This Standard Choice provides the
ability to prompt the user to update reference conditions during the cloning of a record and saves the
update as an ad‑hoc in condition history.
Standard Choice values:
{Enter the condition type.}
Standard Choice values can include:
Yes - No Prompt: When selected and you override or unlock a condition on the daily side, if you update
a reference condition a record, the action impacts all associated records with that reference condition,
without a prompt.
Yes - Prompt: When selected and you override or unlock a condition on the daily side, the user receives a
prompt, “Would you like to update the Reference Condition for all CAPs?” When selected, the user views
a message, “Would you like to update Reference Condition for all Records?” If you choose Yes, the main
reference condition updates all related records associated with it.
No: Civic Platform creates a disable and a history Ad hoc condition record. If you update a reference
condition on a record, the reference overrides the individual record only. This function does not affect other
records with the reference condition.

USER_DISCIPLINES
Product
Civic Platform, GIS
Type
System Switch
Description
This Standard Choice specifies the disciplines, or types that users can conduct, such as Building,
Electrical, or Insulation inspections. The Standard Choice values determine the disciplines available on the
Disciplines List page. You can assign an inspector to one or more disciplines through this page, when you
define the user profile for the inspector.
If you are using GIS, the Standard Choice value must match the spelling of the associated GIS layer name
as it displays on the GIS Map Viewer Table of Contents.
Standard Choice values can include:
Water
Electrical
Plumbing

| Standard Choices Reference | 271

USER_DISTRICTS
Product
Civic Platform, GIS
Type
System Switch
Description
This Standard Choice determines the user districts, or geographic areas, where users can conduct
meetings or inspections, such as Flagstaff East or Flagstaff North. The Standard Choice values determine
the districts available on the User Districts - Add From Standard Choices page. You can assign an
inspector to one or more districts through this page, when you define the user profile for the inspector.
This Standard Choice value must follow the format:
-
If you are using GIS, the Standard Choice value must match the spelling of the associated GIS layer name
as it displays on the GIS Map Viewer Table of Contents.
For example, if the GIS Layer Name is Fire District, the district type is Fire District, and the district name is
1, set the Standard Choice value to Fire District-1.

VAL_CALC_BY_RECORD_TYPE
Product
Civic Platform, Citizen Access
Type
System Switch
Description
This Standard Choice controls valuation calculator versioning, which enables users to track multiple
versions of an occupancy code. Additionally, this Standard Choice controls the availability of the
occupancy grouping feature. Agency administrators can group together and manage occupancy version
information by creating an occupancy group.
This Standard Choice controls the default state of the Filter by Record Type option in the Valuation
Calculator section of Civic Platform.
This functionality extends into public users of Citizen Access. When estimating fees for a record, public
users can enter applicable parameters and can view fees based either on the Contractor Job value or
on the valuation calculation results. This feature also includes the super agency level in Citizen Access.
Administrators can decide whether the fees are calculated based on the higher or lower of the Contractor
job value or the valuation calculation results through the Record Type Administration page or using EMSE
scripting. As a pre-requisite to using this feature, administrators must associate some occupancy to the
record type. The ApplicationSubmitAfter and FeeEstimateAfter4ACA EMSE events relate to each other.
Standard Choice values can include:
Yes. Select the Filter by Record Type option in the Valuation Calculator section.
No {or undefined}. Clear the Filter by Record Type option in the Valuation Calculator section.

| Standard Choices Reference | 272

VALUATION_CALCULATOR_VERSION
Product
Civic Platform
Type
System Switch
Description
This Standard Choice controls valuation calculator versioning, which enables users to track multiple
versions of an occupancy code. Additionally, this Standard Choice controls the availability of the
occupancy grouping feature. Agency administrators can group together and manage occupancy version
information by creating an occupancy group.
You can use the ValuationCalculator_EMSE_Test.txt event script to change the logic of valuation
calculator versioning.
Standard Choice values can include:
Yes
No

VEHICLE
Product
Civic Platform, Mobile Office
Type
System Switch
Description
This Standard Choice identifies the types of vehicles reported during one-time accounting.
Standard Choice values can include:
Motorcycle
Bicycle
Car

VOID_INVOICE_REASON
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines all possible options in the Reason field that users can select when voiding
invoices. You can enter each possible reason as a Standard Choice value.

| Standard Choices Reference | 273

VOID_PAYMENT_REASON
Product
Civic Platform
Type
System Switch
Description
This Standard Choice defines all possible options in the Reason field that users can select when voiding
payments. You can enter each possible reason as a Standard Choice value.

WITHOUT_INSPECTION_TIME
Product
Civic Platform, IVR
Type
System Switch
Description
This Standard Choice controls whether IVR or a third party IVR can schedule inspections without passing
the scheduled start time to Civic Platform.
If administrators set the Standard Choice value to IVR, when users schedule or reschedule inspections
with IVR, IVR does not deliver the scheduled start time to Civic Platform.
If you set the Standard Choice value to IVR, when users schedule or reschedule inspections with a third
party IVR, the IVR system does not deliver the scheduled start time to Civic Platform, as long as the
InspectionTime element is empty in the GovXML requests ScheduleInspection or RescheduleInspection.
Standard Choice values:
IVR

WO_TASK_DURATION_UNIT
Product
Civic Platform, Mobile Office
Type
System Switch
Description
This Standard Choice determines the anticipated unit of time needed to complete the task.
Standard Choice value can include:
Yes. The actual duration in daily work order tasks defaults to the same value as the estimate duration.

WO_TASK_DURATION_SAME_AS_DEFAULT
Product

| Standard Choices Reference | 274

Civic Platform
Type
System Switch
Description
Standard Choice values:
No. Leave the Actual duration default value as zero.

WO_CLOSE_CHECK_TASK
Product
Civic Platform
Type
System Switch
Description
Standard Choice values
Yes. Daily users cannot close a work order until the user marks all attached work order tasks as Complete.

WORKFLOW_FIDS
Product
Civic Platform
Type
System Switch
Description
Use this Standard Choice in conjunction with APPLICATION_TYPE_SECURITY_FID to limit users
with Workflow Supervisor access (FID 8090-Workflow Supervisor enabled). If your agency has users
with Workflow Supervisor access, meaning the user has FID 8090-Workflow Supervisor enabled,
and you need to limit their access, you must list each functional area you want to restrict in both the
APPLICATION_TYPE_SECURITY_FID and the WORKFLOW_FIDS Standard Choice.

WORKFLOW_CONFIGS
Product
Citizen Access
Type
System Switch
Description
This Standard Choice enables the ability to display the e-mail address associated with a workflow task to
public users in the Record Processing Status area on the website.
Standard Choice value may include:
ACA_ENABLE_WF_DISP_EMAIL
Value Desc:

| Standard Choices Reference | 275

Yes. The Civic Platform workflow setting is marked to display an e-mail address for the record in ACA by
default.
No. You define the setting to hide e-mail address associated with the record in ACA by default.

| Function IDs Reference | 276

Function IDs Reference
This section contains a sequential list of Function IDs (FIDs). For each FID, the reference provides the
following sections:
Version. Indicates the Civic Platform product version in which the FID first appeared.
Description. Provides an explanation of what the FID controls.
Interdependency. Lists other FIDs that inter-operate with the current FID, or have a parent relationship or
child relationship to the current FID. FIDs with an inter-operate relationship jointly control a single function.
Child FIDs depend on the parent FID, that is, a disabled parent prevents enablement of the affected child,
regardless of the child setting.
Solution. The solution name associated with the FID.
Access. Provides the Civic Platform navigation path to the item controlled by the FID.

0004-Admin Users
Description
Enables the User administration function for administrators to create and manage users, including defining
the user groups that users belongs to.
Interdependency
Interoperation

0096-Admin User Groups

Solution
All
Access
Classic Admin Tools > User Profile > User

0005-Reference Property Parcels
Description
•

Enables the Parcels portlet for users to create and manage reference parcels.

•

Enables the Parcel tab in the Addresses portlet for users to associate parcels to addresses.

•

Enables the Look Up and Delete buttons in the Parcels tab of the Structures & Establishments portlet,
so users to look up reference parcels for structures and establishments.

Interdependency
Child of #1

0089-Reference Property Owners

Child of #1

0109-Reference Genealogy Split/Merge

Child of #1

0295-Reference Structure and Establishment

Child of #1

0239-Activities For People and Property

Parent of #2

0006-Reference Property Addresses

| Function IDs Reference | 277

Parent of #3

0295-Reference Structure and Establishment

Solution
All
Access
Parcels portlet
Addresses portlet > Parcel tab

0006-Reference Property Addresses
Description
•

Enables the Addresses portlet for users to create and manage reference address information.

•

Enables the Address tab (including the Look Up, New, Delete, Submit, Cancel and GIS buttons) in the
Parcels portlet for users to manage addresses for parcels, and copy or move associated reference
addresses between genealogically related reference parcels.

•

Enables the Address tab in the Contacts portlet for users to manage reference addresses for contacts.

•

Enables the Look Up and Delete buttons in the Addresses tab of the Structures & Establishments
portlet, so users to look up reference addresses for structures and establishments.

Interdependency
Interoperation of #1

0069-Reference Condition Addresses

Parent of #2

0005-Reference Property Parcels

Child of #1

0277-Address Type for the reference address

Child of #1

0321-Reference Address Copy

Child of #1

8388-Reference Address Comments

Child of #1

0239-Activities For People and Property

Interoperation of #3

0344-Show Address on the Contact

Parent of #4

0295-Reference Structure and Establishment

Solution
All
Access
Addresses portlet
Parcels portlet > Address tab
Contacts portlet > Address tab

0008-Reference Licensed Professionals
Description
•

Enables the Licensed Professionals portlet for users to add and manage licensed professionals.

| Function IDs Reference | 278

•

Enables the Look Up and Delete buttons in the Owners tab of the Structures & Establishments portlet,
so users to look up owners for structures and establishments.

•

Enables the Associate Licensed Professional button in the Associated People tab of the Trust Account
portlet, so users can associate licensed professionals to a trust account.

Interdependency
Child of #1

0323-Disable Licensed Professionals Search

Child of #1

8330-People Info Table

Child of #1

8389-Reference Licensed Professional Comments

Child of #1

0283-Associated CAP List

Child of #1

0239-Activities For People and Property

Parent of #2

0295-Reference Structure and Establishment

Parent of #3

0278-Associate People

Solution
All
Access
Licensed Professionals portlet

0025-Admin Workflow Email Settings
Version
5
Description
Enables the eMail Setting administration function of workflow for administrators to specify the combination
of a workflow process, task, and status that generates an email message. Administrators can choose
which email message to send when this combination occurs, and determine the recipient of the email
message.
Interdependency
Interoperation

0026-Admin Workflow Email Messages

Solution
All
Access
Classic Admin Tools > Workflow > eMail Setting

0026-Admin Workflow Email Messages
Description
Enables the email message administration function of workflow for administrators to compose email
messages that they can deliver to specific recipients when a certain task reaches a certain status.
Interdependency
Child

0025-Admin Workflow Email Settings

| Function IDs Reference | 279

Solution
All
Access
Classic Admin Tools > Workflow > eMail Message

0027-Workflow Email Override
Information about this item is unavailable at this time.

0036-Admin Workflow Processes
Description
Enables the Process administration function for administrators to manage workflow processes and
configure workflow tasks in the processes.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Workflow > Process

0043-Tickler
Description
Enables the Tickler and Tickler Collection daily functions in Civic Platform Classic, so users can configure
and mange ticklers (pre-defined search in database for certain tasks).
Interdependency
None
Solution
All
Access
Classic Daily > SmartManager > Tickler
Classic Daily > SmartManager > Tickler Collection

0044-User Preferences
Description
Enables the Preference tab in the Preference portlet for users to set up Civic Platform preferences.
Interdependency
None
Solution

| Function IDs Reference | 280

All
Access
Preference portlet > Preference tab

0045-Admin Organizational Hierarchy
Description
Enables the Organization administration function for administrators to define organization hierarchy,
translating agency’s departments into organization structures.
Interdependency
None
Solution
All
Access
Classic Admin Tools > User Profile > Organization

0047-Admin Fee Payment Periods
Description
Enables the Payment Period administration function for administrators to configure and manage payment
periods. Payment periods can indicate which module a user is working in, or act as flags during batch
processing. Payment periods help manage which fees apply to an application, and when.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Fees > Payment Period

0048-Reference Hearing Locations
Description
Enables the Hearing Location administration function for administrators to add reference hearing locations.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Calendar > Location

| Function IDs Reference | 281

0049-Reference Hearing Bodies
Description
Enables the Hearing Body administration function for administrators to add reference hearing bodies.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Calendar > Hearing Body

0050-Reference Hearing Calendar (old)
Description
Enables the Hearing Calendar administration function for administrators to create hearing calendar items in
Civic Platform Classic.
Interdependency
Interdependency

0183-Reference Hearing Calendar

Civic Platform ignores the setting of FID 0050 if you enable FID 0183. When you disable FID 0183 but
enable FID 0050, the calendar item edit page provides the fields differently than when you enable FID
0183.
Solution
All
Access
Calendar > Hearing Calendar

0054-Admin Condition Types
Description
Enables the Condition Type administration function for administrators to create and manage condition
types.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Condition > Condition Type

| Function IDs Reference | 282

0055-Admin Condition Status
Description
Enables the Condition Status administration function for administrators to create and manage condition
statuses.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Condition > Condition Status

0056-Admin Condition Reference
Description
Enables the Standard Condition administration function for administrators to create and manage standard
conditions.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Condition > Standard Condition Type

0057-Reference Condition Parcels
Description
•

Enables the Conditions tab in the Parcels portlet for users to add and manage conditions for parcels.

•

Enables the Copy and Move buttons in the Conditions tab of the Parcels portlet for users to copy or
move associated conditions between genealogically related reference parcels.

Interdependency
Child of #1

Solution
All
Access
Parcels portlet > Conditions tab

0209-Reference Parcel Condition History

| Function IDs Reference | 283

0058-Admin Workflow Condition Validation
Description
Enables the Process Validation administration function of conditions for administrators to extend the
condition that currently exist for an application to inhibit the workflow process related to that application.
Process validation lets you determine the validity of the workflow process based on the condition of the
application it belongs to.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Condition > Process Validation

0059-Admin Fees Valuation Calculation
Description
Enables the Valuation Calculator admin tool for administrators to configure and manage the valuation
calculations that they can associate with any given ASI field, system defined information field, or Job cost
field in an Application Intake form.
Interdependency
If you enable the Standard Choice VALUATION_CALCULATOR_VERSION, clicking the Valuation
Calculator link in Classic Admin opens the valuation calculator - occupancy portlet in Vantage360.
Solution
All
Access
Classic Admin Tools > Fees > Valuation Calculator

0060-Admin Fees Regional Modifier
Description
Enables the Regional Modifier administration function for administrators to define the region and the
increment for fee adjustment.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Fees > Regional Modifier

| Function IDs Reference | 284

0061-Admin SmartChoice Code
Description
Enables the SmartChoice Group administration function for administrators to configure SmartChoice group
code to associate with application types. The SmartChoice group code determines the information to
include in the application intake form.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > SmartChoice Group

0063-Admin Workflow Task Status
Version
2.5
Description
Enables the Task Status administration function of workflow for administrators to create and manage task
statuses.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Workflow > Task Status

0065-Admin Application Types
Version
2.51
Description
•

Displays the Record Type portlet for administrators to configure record types.

•

Displays the Enable For ACA check boxes in an application type configuration, so administrators can
set the application type to display in Citizen Access, making the information available online.

•

Displays the Document Code for ACA field in an application type configuration on the condition enabled
for FID 0108 Admin Document Type.

•

Enables the Record Type Security portlet for administrators to control access to different application
types based on agency privileges and group privileges.

Interdependency

| Function IDs Reference | 285

Parent of #1

0318-Administration

Child of #2

0244-Fee Estimation

Interoperation of #2

0075-Admin License Types

Interoperation of #3

0108-Admin Document Type

Solution
All
Access
Setup portlet > Administration > AA Admin > Record Type
Setup portlet > Administration > AA Admin > Record Type > (Selecting a record type) Edit
Setup portlet > Application > Record Type Security

0068-Admin Fee Item Sets
Version
4
Description
Enables the Fee Items administration function for administrators to configure and manage fee items.
Interdependency
Interoperation

0181-Admin Fees Manage Schedule

Solution
All
Access
Classic Admin Tools > Fees > Fee Items

0069-Reference Condition Addresses
Description
•

Enables to display the address search results when users click the Submit button in the search form of
the Addresses portlet.

•

Enables the Conditions tab in the Addresses portlet for users to add and manage conditions for
addresses.

Interdependency
Interoperation of #1

0006-Reference Property Addresses

Child of #2

0208-Reference Address Condition History

Solution
All
Access
Addresses portlet > Search form > (After clicking the Submit button) Search results
Addresses portlet > Conditions tab

| Function IDs Reference | 286

0070-Reference Condition Licensed Professionals
Description
Enables the Condition tab in the Licensed Professionals portlet for users to manage conditions for licensed
professionals.
Interdependency
Child

0211-Reference Licensed Professional Cond. History

Solution
All
Access
Licensed Professionals portlet > Conditions tab

0071-Admin Workflow Final Inspection
Description
Enables the Final Inspection button in the Application Type administration function, so administrators can
define the final inspections for workflow tasks.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > Application Type > (Below the Application Type list) Final Inspection
button

0072-Admin App Spec Info
Obsolete. Use FID 0179 instead.

0073-Admin Application Renewal Info
Description
Enables the Renewal Info administration function for administrators to establish renewal information such
as the expiration date, renewal process, and penalty periods for business licenses.
Interdependency
None
Solution
License
Access
Classic Admin Tools > Application > Renewal Info

| Function IDs Reference | 287

0074-Admin License Fee Payment Period
Information about this item is unavailable at this time.

0075-Admin License Types
Description
Displays the Velocity Hall settings instead of Enable For ACA check boxes in an application type
configuration.
Interdependency
None
Interdependency
Interoperation

0065-Admin Application Types

Solution
All
Access
Setup portlet > Administration > AA Admin > Record Type > (Selecting a record type) Edit

0076-Accela Events
Description
Enables the event administration function for super agency administrators to perform the following tasks:
•

Add, update or delete events

•

Add, update or delete event parameters

•

View event logs by time period

Interdependency
None
Solution
SuperAgency
Access
Classic Admin Tools > Agency Profiles > Events

0077-Admin Event Setup
Description
Enables the Events administration function for administrators to manage the association between events
and scripts.
Interdependency

| Function IDs Reference | 288

None
Solution
All
Access
Classic Admin Tools > Events > Events

0078-Admin Event Script Setup
Description
Enables the Script administration function for administrators to add scripts, search scripts, or edit scripts.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Events > Scripts

0079-Admin Event Script Test
Description
Enables the Script Test administration function for administrators to select and test scripts.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Events > Test Script

0080-Admin Rbizdomain Maintenance
Description
Enables the Standard Choices administration function for administrators to add and manage Standard
Choice settings.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Agency Profile > Standard Choices

| Function IDs Reference | 289

0081-Admin Calendar Events
Obsolete.

0082-Reference Structure
Description
Enables the Structure administration function for administrators to define structures.
Interdependency
Child

0194-Access Structure Conditions

Solution
All
Access
Classic Admin Tools > Property > Structure

0083-Reference Structure Template
Description
Enables the Structure Template administration function for administrators to define structure templates.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Property > Str Template

0084-Reference People Contact
Description
•

Enables the Contacts portlet for users to add and manage contacts, including the following tabs:
Contact Detail, Contact Address, Related Contacts, Conditions, Record List, Activity, Associated Public
User, and Assets.

•

Enables the Associate Contact button in the Associated People tab of the Trust Account portlet, so
users can associate contacts to a trust account.

•

Enables the Sync to the Reference button in the Contacts tab, for users to synchronize the information
about a daily contact to its reference.

•

Enables the Also Known As tab in the Contacts portlet for users to manage the Also Known as names
of reference contacts.

| Function IDs Reference | 290

Interdependency
Child of #1

8102-People User Defined Attribute

Child of #1

0322-Reference Merge Contacts

Child of #1

0239-Activities For People and Property

Parent of #2

0278-Associate People

Solution
All
Access
Contacts portlet
Contacts portlet > Also Known As tab
Record portlet > Contacts tab
Trust Account portlet > Associated People tab > Associate Contact button

0085-Admin APO Template
Description
Enables the APO Template administration function for administrators to configure user-defined attributes
for addresses, parcels and owners.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Property > APO Template

0086-Admin Agency Online Help
Description
Enables the OnlineHelp administration function for administrators to define and manage custom help
documents. A help document can be an HTML file, PDF file, text file, Word document, website, or any
other file type that the browser supports.
Interdependency
None
Solution
All Modules
Access
Classic Admin Tools > Help > OnlineHelp

0087-Accela Online Help
Description

| Function IDs Reference | 291

Enables the Online Help administration function for superagency administrators to view the existing help
documents, and add more if necessary.
Interdependency
None
Solution
Superagency
Access
Classic Admin Tools > Agency Profile > OnlineHelp

0088-Admin People User Defined Attributes
Description
Enables the People Template administration function for administrators to configure templates as
additional fields for licensed professionals and contacts.
Interdependency
None
Solution
All
Access
Classic Admin Tools > People > People Template

0089-Reference Property Owners
Description
•

Enables the Owner portlet for users to create and manage reference owner information.

•

Enables the Owner tab in the Parcels and Structures & Establishments portlet for users to manage
owners for parcels, and copy or move associated reference owners between genealogically related
reference parcels.

Interdependency
Parent of #2

0005-Reference Property Parcels

Child

0239-Activities For People and Property

Solution
All
Access
Owner portlet
Parcels portlet > Owner tab
Structures and Establishments portlet > Owner tab

| Function IDs Reference | 292

0092-Accela Functions
Version
3.7
Description
Enables the Functions administration function for superagency administrators to search and view the FID
list and the FID basic information.
Interdependency
None
Solution
Superagency
Access
Classic Admin Tools > Agency Profile > Functions

0093-Accela Release Versions
Version
3.7
Description
Enables the Version administration function for superagency administrators to view the Civic Platform
version information, and maintain the list of modules for each solution.
Interdependency
None
Solution
Superagency
Access
Classic Admin Tools > Agency Profile > Version

0094-Accela Agency
Version
3.7
Description
Enables the Agency administration function for superagency administrators to create and manage agency
settings.
Interdependency
None
Solution
Superagency
Access
Classic Admin Tools > Agency Profile > Agency

| Function IDs Reference | 293

0095-Accela Agency Functions
Version
3.7
Description
Enables the Agency Functions administration function for superagency administrators to view and change
the Function Identification (FID) settings for agencies (do not change the basic functions, but only to enable
or disable optional functions). If you disable a FID for an agency, it is invisible to all the user groups in the
agency.
Interdependency
None
Solution
Superagency
Access
Classic Admin Tools > Agency Profile > Agency Functions

0096-Admin User Groups
Version
3.7
Description
Enables the User Group administration function for administrators to create and manage user groups,
including assigning FIDs to user groups.
Interdependency
Interoperation

0004-Admin Users

Solution
All
Access
Classic Admin Tools > User Profile > User Group

0097-Admin Workflow Review Activity
Version
4
Description
Enables the Activity administration function of workflow for administrators to configure activities for specific
workflow processes and tasks.
Interdependency
None
Solution
All

| Function IDs Reference | 294

Access
Classic Admin Tools > Workflow > Activity

0098-Reference Standard Comments
Version
4.0
Description
Enables the Std Commend administration function for administrators to view and configure standard
comments in Civic Platform Classic.
Interdependency
Interdependency

0290-Admin - Standard Comments

If you enable FID 0290, the Std Comment administration page in Civic Platform Classic displays the
Standard Comments administration portlet from Civic Platform Vantage360. Otherwise, the Std Comment
administration page displays the legacy configuration page.
Solution
All
Access
Classic Admin Tools > Agency Profile > Std Comment

0099-Admin Oracle Reports
Version
3.8
Description
Enables the Oracle Report administration function for administrators to view and add Oracle reports in
Civic Platform Classic.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Agency Profile > Oracle Report

0106-Admin Batch job
Version
3.7
Description
Any of the following FIDs can enable the Batch Engine administration portlet:
•

0106-Admin Batch job (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

| Function IDs Reference | 295

•

0284-Batch Job Maintenance (the list portlet and the Job Detail tab) and 0285-Batch Job Schedule (the
Job Schedule tab and the Log tab)

•

8122-Batch Job (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

•

8049-Batch Job (old) (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

Interdependency
Interoperation

0284-Batch Job Maintenance

Interoperation

8122-Batch Job

Interoperation

8049-Batch Job (old)

Solution
All
Access
Setup portlet > System Tools > Batch Engine
Batch Jobs portlet

0107-Admin GIS Service
Version
5
Description
Enables the GIS Service administration function for administrators to configure and manage GIS services.
Interdependency
Child

0243-GIS Service

Solution
All
Access
Classic Admin Tools > GIS > GIS Service

0108-Admin Document Type
Version
6.1.1
Description
•

•

Enables the Attachments administration function for administrators to perform the following tasks:
•

Create and manage document groups for organizing different types of documents that users can add
to certain applications

•

Add document types to document groups and set properties for each document type

Displays the Document Code for ACA field in an application type configuration on the condition for
which you enable FID 0065 Admin Application Type.

| Function IDs Reference | 296

Interdependency
Interoperation with #2

0065-Admin Application Types

Solution
All
Access
Classic Admin Tools > Attachments > Document
Classic Admin Tools > Application > Application Type > Application Category - Edit

0109-Reference Genealogy Split/Merge
Version
3.8
Description
•

Enables the Merge and Split buttons in the Parcels portlet for users to split a parent parcel into multiple
descendents, or merge parcels together in a “spousal” relationship, or combine multiple parcels into a
single descendent.

•

Enables the Genealogy Summary tab in the Parcels portlet for users to view and operate the parcel
genealogy.

When set to full access, Civic Platform automatically sets FID 0005 Reference Property Parcels, FID 0006
Reference Property Addresses, FID 0089 Reference Property Owners, and FID 8281 Inspector Districting
to full access. This way, users can split and merge reference parcels in Civic Platform.
Interdependency
Parent

0005-Reference Property Parcels

Solution
All
Access
Parcels portlet > Merge, Split buttons
Parcels portlet > Genealogy Summary tab

0110-Reference Owner Condition
Version
3.8
Description
Enables the Conditions tab in the Owners portlet for users to add and manage conditions for owners.
Interdependency
Child

Solution
All
Access

0210-Reference Owner Condition History

| Function IDs Reference | 297

Owners portlet > Conditions tab

0111-Admin GIS Dynamic Themes
Version
5
Description
Enables the Dynamic Theme administration function for administrators to configure GIS query themes.
Interdependency
None
Solution
All
Access
Classic Admin Tools > GIS > Dynamic Theme

0112-Admin Workflow
Version
4.1
Description
Enables the Workflow administration function for administrators to define and manage workflow hierarchy.
Interdependency
Child

0249-Workflow Edit

Solution
All
Access
Classic Admin Tools > Workflow > Workflow

0115-Reference Calendar Structure
Version
3.9
Description
Enables the Structure as a calendar type in the calendar management in Civic Platform Classic, so users
can configure structure calendars.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Calendar > Calendar > Structure option in Type field

| Function IDs Reference | 298

0116-Admin Calendar Structure Blockout
Version
3.9
Description
Enables the Structure Blockout as a calendar type in the calendar management in Civic Platform Classic,
so users can configure structure blockout calendars.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Calendar > Calendar > Structure Blockout option in Type field

0117-Admin Calendar Inspection Blockout
Version
3.9
Description
Enables the Inspection Blockout as a calendar type in the calendar management in Civic Platform Classic,
so users can configure inspection blockout calendars.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Calendar > Calendar > Inspection Blockout option in Type field

0118-Admin GIS Search Tools
Version
5
Description
Enables the GIS Search Fields administration function for administrators to configure the search fields
applicable in GIS Search.
Interdependency
None
Solution
All
Access
Classic Admin Tools > GIS > GIS Search Fields

| Function IDs Reference | 299

0119-Admin Citation Number Generator
Information about this item is unavailable at this time.

0120-Accela Login Page Navigation Link Maintenance
Version
4
Description
Enables the Login Page Links administration function for superagency administrators to maintain login
page navigation links.
Interdependency
None
Solution
Superagency
Access
Classic Admin Tools > Agency Profile > Login Page Links

0121-Admin Agency Announcements
Version
4
Description
Enables the Announcement administration function for administrators to define and manage
announcements that display in a pop-up window after a user logs on to Civic Platform.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Help > Announcements

0122-Accela System Announcements
Version
4
Description
Enables the Announcements administration function for superagency administrators to configure system
announcements.
Interdependency
None

| Function IDs Reference | 300

Solution
Superagency
Access
Classic Admin Tools > Agency Profile > Announcements

0123-Admin Inspection Result Group
Version
4.2
Description
Enables the Inspection Result Group administration function for administrators to configure and manage
inspection result groups.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Inspection > Inspection Result Group

0124-Admin Inspection Guide Sheet
Version
4.2
Description
Enables the Inspection Guide Sheet function for administrators to create and manage inspection guide
sheets.
Interdependency
Child

0291-Guide Sheet Template Data

Solution
All
Access
Classic Admin Tools > Inspection > Guide Sheet

0125-Admin Inspection Guide Sheet Group
Version
4.2
Description
Enables the Guide Sheet Group function for administrators to create and manage inspection guidesheet
groups.
Interdependency

| Function IDs Reference | 301

None
Solution
All
Access
Classic Admin Tools > Inspection > Guide Sheet Group

0127-Admin Application Status Group
Version
4
Description
Enables the Application Status Group administration function for administrators to create and manage
application status groups that apply to specific types of applications.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > Application Status Group

0128-Accela User Profile Replace Password
Version
4
Description
Enables the Replace Password administration function for superagency administrator to set a new
password for an agency user.
Interdependency
None
Solution
Superagency
Access
Classic Admin Tools > Agency Profile > Replace Password

0129-Admin GIS Feature
Version
5
Description
Enables the GIS Feature administration function for administrators to view and manage all the GIS
features, and configure the genealogy.
Interdependency

| Function IDs Reference | 302

None
Solution
All
Access
Classic Admin Tools > GIS > GIS Feature

0130-Admin GIS Establish Genealogy
Version
5
Description
Enables the GIS Establish Genealogy administration function for administrators to configure the genealogy
between GIS objects.
Interdependency
None
Solution
All
Access
Classic Admin Tools > GIS > Establish Genealogy

0131-Admin Find App (Custom)
Version
5
Description
Enables the Find Application Profile administration function for administrators to customize the advanced
application search window and results window for different user groups.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > Find Application Profile

0133-Admin Inspection Type Sets
Version
4.2
Description
Enables the Inspection Group and Type administrator function for administrators to search inspection
groups and inspection types, and configure inspection groups and inspection types.
Interdependency

| Function IDs Reference | 303

Child

0218-Admin Auto-Assign Inspection

Child

0288-Enable Inspection Flow

Child

0289-Enable Inspection Milestone

Child

0232-Admin display Option/Required column

Child

0229-Admin display Department

Solution
All
Access
Classic Admin Tools > Inspection > Inspection

0134-Admin-Message-General
Version
4
Description
Enables the Announcements portlet for administrators to configure and manage messages to display in
Civic Platform and/or Citizen Access.
Interdependency
Child

0135-Admin-Message-Supervisor

Solution
All
Access
Setup portlet > Communication Manager > Announcements

0135-Admin-Message-Supervisor
Version
4
Description
Enables the Assign Agency, Assign Module, and Assign Group buttons in the Recipient tab of the
Announcements administration portlet, so administrators can manage messages in all agencies.
Interdependency
Parent

0134-Admin-Message-General

Solution
All
Access
Setup portlet > Communication Manager > Announcements > Recipient tab > Assign Agency, Assign
Module, and Assign Group buttons

| Function IDs Reference | 304

0136-Admin Application General Profile
Version
4.1
Description
Enable the General Profile administration function for administrators to configure what the daily activities
application window look like. The profiles affect application summary windows and search windows, as well
as application headers.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > General Profile

0137-Admin Filter View
Version
4.1
Description
•

Enables the Form Portlet Designer administration function for administrators to configure the forms and
lists for their agency users.

•

Enables the Edit View menu item in list and form portlets for users to customize the layout.

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Form Portlet Designer
List and form portlets (such as Record portlet, Professionals portlet) > Menu button > Edit View button

0139-Admin-DataFilter/QuickQuery
Version
4.1
Description
•

Enables the Data Filter portlet for administrators to restrict the data that display in lists or forms for
certain users.

•

Enables the Global QuickQueries portlet for administrators to define quickqueries and assign them to
users, or user groups.

| Function IDs Reference | 305

•

Enables the My QuickQueries portlet for administrators to view and manage the quickqueries created
by agency users.

Interdependency
Child of #3

0327-Edit My QuickQuery By Administration

Solution
All
Access
Setup portlet > Data Filter & Query > Data Filter
Setup portlet > Data Filter & Query > Global QuickQueries
Setup portlet > Data Filter & Query > My QuickQueries

0142-Admin Agency Security Policies
Version
5
Description
•

Enables the ACA Admin portlet for administrators to configure and design the Citizen Access website.

•

Enables the ASI Security portlet for administrators to perform the following tasks:
•

View or assign users’ access to certain ASI data and ASI table data

•

Forbid users from accessing to certain ASI data and ASI table data

Assigns security permissions based on the user login at the Agency, Module, User Group, and User levels.
•

Enables the Inspection Type Security portlet for administrators to establish security levels for inspection
types.

Interdependency
None
Solution
Land/Building/Licenses/Enforcement/AMS
Access
Setup portlet > Administration > ACA Admin
Setup portlet > Application > ASI Security
Setup portlet > Inspection > Inspection Type Security

0143-Admin Workflow Task Spec Info
Version
6
Description
Enables the Task Specific Info administration function of workflow for administrators to create and manage
task-specific information groups to include on tasks, in addition to the standard task fields.

| Function IDs Reference | 306

Interdependency
Child

0180-Admin Workflow Task Spec Info Subgroups

Solution
All
Access
Classic Admin Tools > Workflow > Task Specific Info

0144-Admin Agency Dynamic Menu
Information about this item is unavailable at this time.

0145-Admin Report Management
Version
5
Description
Enables the Report Management administration function (available as a link) for administrators to manage
reports from Civic Platform Classic.

Interdependency
Interdependency

0226-Reports Manager Admin

Child

0193-Report Management Auto Report

Solution
All
Access
Classic Admin Tools > Report Management link

0146-Admin Folder Admin
Information about this item is unavailable at this time.

| Function IDs Reference | 307

0147-Accela DB Admin
Version
5.0
Description
Enables the Manage Data Sources tool in the Report Management portlet, so super agency administrators
can configure the data sources for reports.
Interdependency
None
Solution
Superagency
Access
Classic Daily > Report > Report Management > Tools tab > Manage Data Source

0148-Admin Report Admin
Information about this item is unavailable at this time.

0149-Admin Universe Admin
Information about this item is unavailable at this time.

0150-Admin Workload and Skillset
Version
6
Description
•

Enables the Workload portlet for administrators to create and manage workloads that Civic Platform
uses to determine which skillset to assign the work to.

•

Enables the Skillset portlet for administrators to set up the available skillsets, so Civic Platform can
assign appropriate workloads to the department or employee with the best skillset necessary to perform
the work.

Interdependency
None
Solution
All
Access
Setup portlet > Workflow & Activity > Workload
Setup portlet > Workflow & Activity > Skillset

| Function IDs Reference | 308

0151-Admin Alert and Rules
Version
1
Description
Enables the Alert and Rule portlet for administrators to perform the following tasks:
•

View the existing user-defined alerts and rules

•

Create or delete user-defined alerts and rules

•

Assign recipients of alerts and rules

Interdependency
None
Solution
All
Access
Setup portlet > Communication Manager > Alert
Setup portlet > Communication Manager > Rule

0152-Admin IntelliScript
Version
1
Description
Enables the IntelliScript portlet for IntelliScript integration.
Interdependency
None
Solution
All
Access
IntelliScript portlet

0153-Reference GIS Proximity Alerts
Version
5.1
Description
Enables the GIS Proximity Alerts administration function for administrators to configure GIS proximity
alerts.
Interdependency
None

| Function IDs Reference | 309

Solution
All
Access
Classic Admin Tools > GIS > Proximity Alerts

0154-Reference Workflow Proximity Alerts
Version
5.1
Description
Enables the Proximity Alerts administration function of workflow for administrators to assign proximity alerts
to workflow tasks.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Workflow > Proximity Alerts

0155-Admin Label Configuration
Version
5.1
Description
Enables the Text Settings portlet for administrators to perform the following tasks:
•

View the existing text settings

•

Create text settings that replace existing display text such as messages and dialog boxes with
customized text.

•

Delete text settings.

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Text Settings

0156-Admin SmartChart Configuration
Version
5.1

| Function IDs Reference | 310

Description
Enables the SmartCharts portlet for administrators to perform the following tasks:
•

View existing SmartChart settings

•

Add new SmartCharts and assign them to user groups

•

Delete SmartCharts which are no longer in use

Interdependency
Interoperation

0157-Admin SmartChart Query Configuration

Solution
All
Access
Setup portlet > Report > SmartCharts

0157-Admin SmartChart Query Configuration
Version
5.1
Description
Enables the SmartChart Queries portlet for administrators to create and manage SmartChart Queries.
Interdependency
Interoperation

0156-Admin SmartChart Configuration

Solution
All
Access
Setup portlet > Report > SmartChart Queries

0158-Admin Attribute Definition
Version
5.1
Description
•

Enables the Attribute administration portlet for both assets and structures & establishments, so
administrators can configure attributes in addition to standard fields.

•

Enables the Attributes tab in the Attribute Template administration portlet for both assets and structures
& establishments, so administrators can associate attributes with attribute templates.

Interdependency
Parent of #2

0159-Admin Attribute Template Definition

Parent of #2

0294-Structure and Establishment

| Function IDs Reference | 311

Solution
Accela Asset Management
Access
Setup portlet > Assets > Attribute
Setup portlet > Assets > Attribute Template > Attributes tab
Setup portlet > Structures & Establishments > Attribute
Setup portlet > Structures & Establishments > Attribute Template > Attributes tab

0159-Admin Attribute Template Definition
Version
5.1
Description
•

Enables the Attribute Template administration portlet for assets, so administrators can configure
attribute templates.

•

Enables the Attribute Template administration portlet for structures & establishments, so administrators
can configure attribute templates. Controls the Template link under the Structures and Establishments
link in the Admin Setup menu.

Interdependency
Child

0158-Admin Attribute Definition

Child

0305-Admin Attribute Table Definition

Parent of #2

0294-Structure and Establishment

Solution
Accela Asset Management
Access
Setup portlet > Assets > Attribute Template
Setup portlet > Structures & Establishments > Attribute Template

0160-Admin AMS Asset Definition
Version
5.1
Description
Enables the Asset Type administration portlet for users to perform the following tasks:
•

View the existing asset type definitions

•

Create, search, edit and delete asset types

Interdependency
Child

0253-Asset GIS Synchronize

Child

0252-Asset Type Available CAP Type

| Function IDs Reference | 312

Child

0326-Define Asset Usage Unit Type

Child

0182-Admin GIS Attribute Mapping

Interoperation

0274-Rating Type

Solution
Accela Asset Management
Access
Setup portlet > Assets > Type

0161-Admin Work Order Costing Item Definition
Version
5.1
Description
•

Enables the Cost Item portlet for administrators to define and manage cost items.

•

Enables the Cost Item tab in the Cost Group portlet for administrators to manage cost items in a cost
group.

Interdependency
Child

0332-Daily Cost Rate Definition

Parent of #2

0330-Admin Work Order Costing Group Definition

Solution
Accela Asset Management
Access
Setup portlet > Work Orders > Cost Item

0162-Admin Work Order Parts Definition
Obsolete.

0163-Admin Work Order Tools Definition
Obsolete.

0164-Admin Links Portlets
Version
5.1
Description

| Function IDs Reference | 313

•

•

Enables the Link Portlets portlet for administrators to perform the following tasks:
•

View the existing link portlets

•

Create more link portlets that contain links to URLs or to other portlets

•

Delete link portlets if necessary

Enables the Portlet portlet for administrators to create their own portlets.

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Link Portlets
Setup portlet > Agency Profile > Portlet

0169-Admin-Work Order Template
Version
6.1
Description
Enables the Work Order Template portlet for administrators to perform the following tasks:
•

View the work order template list

•

Search, modify, create, or delete work order templates

Interdependency
Child

0170-Admin-WO Template Costing

Child

0173-WO Template Part

Interoperation

0254-WO Task Definition

Solution
Accela Asset Management
Access
Setup portlet > Work Orders > Work Order Template

0170-Admin-WO Template Costing
Version
6.1
Description
Enables the Costing tab in the Work Order Template portlet for administrators to perform the following
tasks:
•

View the costing added to the current work order template

| Function IDs Reference | 314

•

Look up costing and add the selected to the work order template

•

Delete costing from the work order template

Interdependency
Parent

0169-Admin - Work Order Template

Solution
Accela Asset Management
Access
Setup portlet > Work Orders > Work Order Template > Costing tab

0173-WO Template Part
Version
6.2
Description
Enables the Part tab in the Work Order Template portlet for administrators to perform the following tasks:
•

View the parts associated to work order templates

•

Look up parts and associate one or more with work order template

•

Delete the association between parts and work order templates

Interdependency
Parent

0169-Admin - Work Order Template

Solution
Accela Asset Management
Access
Setup portlet > Work Orders > Work Order Template > Part tab

0175-Admin App Spec Info Groups
Obsolete.

0179-Admin App Spec Info Subgroups
Version
6
Description
Enables the Application Spec Info function for administrators to configure ASI groups.
Interdependency
None

| Function IDs Reference | 315

Solution
All
Access
Classic Admin Tools > Application > Application Spec Info

0180-Admin Workflow Task Spec Info Subgroups
Version
6
Description
Enables task-specific info subgroups in the Task Specific Info administration function of workflow for
administrators to create and assign task-specific information subgroups to task-specific information groups.
Interdependency
If you disable FID 0143 and enable FID 0180, the Task Specific Info administration function works.
Solution
All
Access
Classic Admin Tools > Workflow > Task Specific Info

0181-Admin Fees Manage Schedule
Version
6
Description
•

Enables the Manage Schedule administration function for administrators to manage fee schedules by
modules.

•

Enables the Fee Schedule drop-down list in the Fee Item-Add page for administrators to associate a fee
schedule with a fee item.

Interdependency
Interoperation

0068-Admin Fee Item Sets

Solution
All
Access
Classic Admin Tools > Fees > Manage Schedule
Classic Admin Tools > Fees > Fee Items > Add button (to open the Fee Item-Add page) > Fee Schedule
field

0182-Admin GIS Attribute Mapping
Version

| Function IDs Reference | 316

6.1
Description
With the “Master Inventory in GIS” option checked for the asset type, enables the GIS Attribute Mapping
tab in the Asset Type administration portlet, so administrators can link asset type attribute fields to GIS
attribute.
Interdependency
Parent

0160-Admin AMS Asset Definition

Solution
Accela Asset Management
Access
Setup portlet > Assets > Type > GIS Attribute Mapping tab

0183-Reference Hearing Calendar
Version
6.1
Description
Enables the Hearing Calendar administration function for administrators to create hearing calendar items in
Civic Platform Classic.
Interdependency
Interdependency

0050-Reference Hearing Calendar (Old)

If you enable FID 0183, Civic Platform ignores the setting of FID 0050. When you disable FID 0183 but
enable FID 0050, the calendar item edit page provides the fields differently than when you enable FID
0183.
Solution
All
Access
Classic Admin Tools > Calendar > Hearing Calendar

0184-Admin Content Customization
Version
6.0.1
Description
•

•

Enables the Content Customize portlet for administrators to perform the following tasks:
•

View the existing Content Customize configuration

•

Customize message content

Enables the Notification Template portlet for administrators to perform the following tasks:
•

View the existing email templates

| Function IDs Reference | 317

•

Customize email templates

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Content Customize
Setup portlet > Communication Manager > Notification Template

0185-Admin V360 Export
Version
6.1
Description
Enables the Export portlet for administrators to export system settings such as rule settings and
QuickQuery settings into an XML file for importing to other agencies.
Interdependency
None
Solution
All
Access
Setup portlet > System Tools > Export

0186-Admin V360 Import
Version
6.1
Description
Enables the Import portlet for administrators to import the .XML system settings file from other agencies.
Interdependency
None
Solution
All
Access
Setup portlet > System Tools > Import

0187-Admin Upload Logo Image
Version
6.1
Description

| Function IDs Reference | 318

Enables the Logo portlet for administrators to perform the following tasks:
•

View and download logos for agencies

•

Upload or delete logo files for agencies

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Logo

0188-Admin Flow Diagram
Version
6.1.1
Description
Enables the Flow Diagram administration function for administrators to set up and manage flow diagrams,
each flow diagram providing list of nodes that help users perform their daily tasks.
Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > My Navigation

0190-Manage Trust Account
Version
6.1.2
Description
•

•

Enables the Trust Account portlet for users to perform the following tasks:
•

Search and view trust accounts

•

Maintain trust accounts

•

Perform trust account transactions

•

View and print trust accounts reports

Enables the Trust Account tab, in the Record port, for users to perform the following tasks:
•

Manage all trust accounts associated with the current record or its associated address, parcel,
contact, licensed professional, and parent record.

•

Set one trust account as the primary trust account.

| Function IDs Reference | 319

Interdependency
Child

0279-Associate Address

Child

0280-Associate Parcel

Child

0278-Associate People

Child

8107-Cashier-Supervisor

Child

0331-Trust Account Associated Record

Solution
All
Access
Trust Account portlet
Record portlet > Trust Account tab

0191-Update license expiration task
Version
6.1.1
Description
Enables the synchronization of the license information from a reference license professional to its
associated records in Civic Platform Classic.
Interdependency
None
Solution
All
Access
Classic Admin Tools > People > Licensed Professional

0192-Workflow Report Setting
Version
6.1.2
Description
Enables the Report Setting administration function of workflow for administrators to manage report
associations with workflow tasks, so when users change a workflow task, a report automatically prints.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Workflow > Report Setting

| Function IDs Reference | 320

0193-Report Management Auto Report
Version
6.1.2
Description
Enables the Auto Report administration function in Civic Platform Classic for administrators to define
reports that automatically print with workflow task updates.
Interdependency
Parent

0145-Admin Report Management

Solution
All
Access
Classic Admin Tools > Report Management > Auto Report

0194-Access Structure Conditions
Version
6.1.2
Description
Enables the Condition links besides structures in the Structure - List page, so administrators can configure
conditions for reference structures in Civic Platform Classic.
Interdependency
Parent

0082-Reference Structure

Child

0212-Reference Structure Condition History

Solution
All
Access
Classic Admin Tools > Property > Structure > Condition link in the Structure - List page

0195-Admin-PM Schedule
Version
6.1
Description
Enables the PM Schedule portlet for users to perform the following tasks:
•

View the PM schedules list

•

Create, search, edit and delete PM schedules

Interdependency

| Function IDs Reference | 321

Child

0201-Admin-Generating Work Orders By PM Schedule

Child

0196-Admin-PM Schedule Linked Quick Query

Child

0199-Admin-PM Schedule Hold Event

Solution
Accela Asset Management
Access
PM Schedule portlet

0196-Admin-PM Schedule Linked Quick Query
Version
6.1
Description
Enables the Linked Quick Query tab in the PM Schedules portlet for users to perform the following tasks:
•

Select a linked quick query and save it to the PM schedule. The quick query options link with the AMS
Asset Data List portlet in the Global QuickQueries administration portlet.

•

Execute linked quick query, and link the queried assets to the PM schedule.

Interdependency
Parent

0195-Admin - PM Schedule

Solution
Accela Asset Management
Access
PM Schedule > Linked Quick Query tab

0197-Admin-PM Schedule Linked Asset
Version
6.1
Description
Enables the Linked Asset tab in the PM Schedules portlet for users to perform the following tasks:
•

View the linked asset list

•

Edit or delete linked asset

•

View selected asset in GIS

Interdependency
Parent

0195-Admin - PM Schedule

Interoperation

8189-Asset Data Management

Interoperation

8119-GIS Service

| Function IDs Reference | 322

Solution
Accela Asset Management
Access
PM Schedule > Linked Asset tab

0198-Admin-PM Schedule Skipped Asset
Version
6.1
Description
Enables the Skipped Asset tab in the PM Schedules portlet for users to perform the following tasks:
•

View the skipped asset list

•

Edit or delete skipped asset

•

View selected asset in GIS

Interdependency
Parent

0195-Admin - PM Schedule

Interoperation

8189-Asset Data Management

Interoperation

8119-GIS Service

Solution
Accela Asset Management
Access
PM Schedule > Skipped Asset tab

0199-Admin-PM Schedule Hold Event
Version
6.1
Description
Enables the Hold Event tab in the PM Schedules portlet for users to perform the following tasks:
•

View the hold event list

•

Create, edit, and delete hold events

Interdependency
Parent

Solution
Accela Asset Management
Access
PM Schedule > Hold Event tab

0195-Admin - PM Schedule

| Function IDs Reference | 323

0200-Admin-PM Schedule Maintenance Record
Obsolete.

0201-Admin-Generating Work Orders By PM Schedule
Version
6.1
Description
Enables the Generate button in the PM Schedule portlet for users to generate work orders by PM
schedules.
Interdependency
Parent

0195-Admin - PM Schedule

Solution
Accela Asset Management
Access
PM Schedules portlet > Generate button

0202-Application Type Image
Version
6.1
Description
Enables the Application Type Icon field in the Application Type administration function, so administrators
can assign an image to an application type.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > Application Type > (After selecting an application type) Application
Type Icon field

0204-Properties Rename Parcel ID
Version
6.1.2
Description
Enables the Rename link in the Parcel administration function, so administrators can rename a parcel, that
is, creating a new parcel record that is an exact copy of the old parcel record. Re-links addresses, owners,

| Function IDs Reference | 324

conditions, attachments, genealogy records, and permits, from the old parcel record, to the new parcel
record. The new parcel record has a status of Active (Enabled). The old parcel record remains in Civic
Platform, but with a disabled status.
Interdependency
None
Solution
All
Access
Class Admin Tools > Property > Parcels > Rename link in the parcels list

0205-Admin App Spec Info Table
Version
6.2
Description
Enables the Application Spec Info Table function for administrators to configure ASI tables.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > Application Spec Info Table

0206-Admin Fee Decisions
Version
6.2
Description
Enables the Fee Calc and Fee Calc Criteria administration functions for administrators to create complex
fee calculations. The if-then calculations follow a true-false logic to determine values for complex
calculations.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Fees > Fee Calc
Classic Admin Tools > Fees > Fee Calc Criteria

0207-Admin Inspector Districts
Version

| Function IDs Reference | 325

6.2
Description
•

Enables the User Information link in the User administration function, so administrators can configure
the inspector profile information about users.

•

Enables the District link in the Parcel administration function, so administrators can specify the
inspection district that parcels belongs to.

•

Enables the District link in the Address administration function, so administrators can specify the
inspection district that addresses belongs to.

Interdependency
None
Solution
All
Access
Classic Admin Tools > User Profile > User > User Information link for each user
Classic Admin Tools > Property > Parcel > District link for each parcel
Classic Admin Tools > Property > Address > District link for each address

0208-Reference Address Condition History
Version
6.2
Description
Displays the Condition History tab when users click a condition in the Condition tab of the Addresses
portlet.
Interdependency
Parent

0069-Reference Condition Addresses

Solution
All
Access
Addresses portlet > Conditions tab > (After selecting a condition) Condition History tab

0209-Reference Parcel Condition History
Version
6.2
Description
Displays the Condition History tab when users click a condition in the Condition tab of the Parcels portlet.
Interdependency
Parent

Solution

0057-Reference Condition Parcels

| Function IDs Reference | 326

All
Access
Parcels portlet > Conditions tab > (After selecting a condition) Condition History tab

0210-Reference Owner Condition History
Version
6.2
Description
Displays the Condition History tab when users click a condition in the Condition tab of the Owners portlet.
Interdependency
Parent

0110-Reference Owner Condition

Solution
All
Access
Owners portlet > Conditions tab > (After selecting a condition) Condition History tab

0211-Reference Licensed Professional Cond. History
Version
6.2
Description
Displays the Condition History tab when users click a condition in the Condition tab of the Licensed
Professionals portlet.
Interdependency
Parent

0070-Reference Condition Licensed Professionals

Solution
All
Access
Licensed Professionals portlet > Conditions tab > (After selecting a condition) Condition History tab

0212-Reference Structure Condition History
Version
6.2
Description
Enables the Deleted Condition(s) section when users view the condition of a structure in Civic Platform
Classic.
Interdependency
Parent

0194-Access Structure Conditions

| Function IDs Reference | 327

Solution
All
Access
Classic Admin Tools > Property > Structure > Condition link in the Structure - List page > Deleted
Condition(s) section in Structure Condition Summary

0213-Admin AMS Parts Item Location
Version
6.2
Description
Enables the Part Location administration portlet for users to perform the following tasks:
•

View the existing part location definitions

•

Create, search, edit and delete part locations

Interdependency
None
Solution
Accela Asset Management
Access
Setup portlet > Part > Part Location

0214-Admin AMS Parts Vendors and Manufacturers
Version
6.2
Description
Enables the Part Contact portlet for administrators to perform the following tasks:
•

View the existing part contacts including manufacturers and vendors

•

Create, search, edit and delete part contacts

Interdependency
None
Solution
Accela Asset Management
Access
Setup portlet > Part > Part Contact

0218-Admin Auto-Assign Inspection
Version

| Function IDs Reference | 328

6.2
Description
Enables the Inspection Discipline administrator function in the inspection type configuration, so
administrators can assign disciplines to an inspection type.
Interdependency
Parent

0133-Admin Inspection Type Sets

Solution
All
Access
Classic Admin Tools > Inspection > Inspection > Inspection -Edit Page > Configuration button > Inspection
Discipline button

0219-Admin AMS PM Schedule Location
Version
6.2
Description
Enables the Linked Address tab in the PM Schedules portlet for users to perform the following tasks:
•

View the addresses linked to PM schedules

•

Look up addresses and link one or more to a PM schedule

•

Delete the linking between addresses and PM schedules

Interdependency
Interoperation

0220-Admin AMS Address PM Schedule

Solution
Accela Asset Management
Access
PM Schedules > Linked Address tab

0220-Admin AMS Address PM Schedule
Version
6.2
Description
Enables the PM Schedules tab in the Addresses portlet so users can view all the PM Schedules
associated to the current address.
Interdependency
Interoperation

Solution
Accela Asset Management

0219-Admin AMS PM Schedule Location

| Function IDs Reference | 329

Access
Addresses > PM Schedules tab

0221-Admin Console Management
Version
6.2
Description
Enables the Console Configuration portlet for administrators to create and organize the various console
configurations.
Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Console Configuration

0222-Address Asset
Version
6.2
Description
Enables the Assets tab in the Addresses portlet for users to view all the assets associated to the current
address.
Interdependency
None
Solution
Accela Asset Management
Access
Addresses portlet> Assets tab

0223-Address Work Order
Version
6.2
Description
Enables the Work Order tab in the Addresses portlet for users to view all the work orders associated to the
current address.
Interdependency
None
Solution
Accela Asset Management

| Function IDs Reference | 330

Access
Addresses > Work Order tab

0224-Active Directory
Version
6.2.1
Description
•

Enables the External User Policy administration function for administrators to add an active directory
server to Civic Platform security policies.

•

Enables External User Search in the User Add page for administrators to search and add external users
in the active directory server to Civic Platform database.

Interdependency
None
Solution
All
Access
Classic Admin Tools > Agency Profile > Security Policies > External User Policy
Classic Admin Tools > User Profile > User > External User option in the User Add page

0226-Reports Manager Admin
Version
6.3.0
Description
Enables the Report Manager portlet for administrators to manage report services, report variables, and
reports.
Interdependency
Child

0240-Reports Manager Admin

Solution
All
Access
Setup portlet > Report > Report Manager

0227-Condition Assessment
Version
6.3.0
Description
Enables the Condition Assessment portlet for administrators to perform the following tasks:

| Function IDs Reference | 331

•

View the existing condition assessment type definitions

•

Create, search, edit and delete condition assessment types

Interdependency
Interoperation

0274-Rating Type

Solution
Accela Asset Management
Access
Setup portlet > Assets > Condition Assessment

0229-Admin display Department
Version
6.3.0
Description
Displays the Department field in the Inspection-Edit page, so administrators can select the department
responsible for an inspection type.
Interdependency
Parent

0133-Admin Inspection Type Sets

Solution
All
Access
Classic Admin Tools > Inspection > Inspection > (In the Inspection-Edit page) Department field

0230-Menu Navigation Admin
Version
6.3.0
Description
Enables the Menu Navigation portlet for administrators to perform the following tasks:
•

Configure the custom navigation menu that displays in the Go To menu tab.

•

Configure the record detail tabs.

| Function IDs Reference | 332

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Menu Navigation

0231-Admin Inspection Type/Guide Sheet for ODS
Information about this item is unavailable at this time.

0232-Admin display Option/Required column
Version
6.3.0
Description
Displays the Required/Optional column in the Inspection-Edit page, so administrators can set whether to
require an inspection type for an inspection group.
Interdependency
Parent

0133-Admin Inspection Type Sets

Solution
All
Access
Classic Admin Tools > Inspection > Inspection > (In the Inspection-Edit page) Required/Optional column

0234-Workflow Calendar
Version
6.3.2
Description
Enables the Workflow Blockout as a calendar type in the calendar management in Civic Platform Classic,
so users can configure workflow blockout calendars.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Calendar > Calendar > Workflow Blockout option in Type field

| Function IDs Reference | 333

0235-Inspection Default Value Policy
Version
6.3.2
Description
Enables the Inspection Default Value Policy function for administrators to establish rules (default settings)
for certain inspections created by specify agency or group.
•

Default Status for New Inspection

•

Number of Calendar Days Available to Schedule Inspections

•

Allow Same Day Inspection Scheduling

•

Inspection Cutoff Time

Interdependency
None
Solution
All
Access
Classic Admin Tools > Agency Profile > Security Policy > Inspection Default Value Policy link

0236-Inspection Type and Status Security
Version
6.3.2
Description
Enables the Inspection Type and Status Security function for administrators to perform the following tasks:
•

Specify the default status when a specific agency or specific group creates an inspection

•

Define the edit and read access right, of a specific agency or a specific group, to an inspection after its
creation

•

Specify whether a specific agency or specific group has the permission to create an inspection of
specific inspection group/inspection type

Interdependency
None
Solution
All
Access
Classic Admin Tools > Agency Profile > Security Policy > Inspection Type and Status Security link

| Function IDs Reference | 334

0237-Attach GIS Object
Obsolete.

0239-Activities For People and Property
Version
6.3.2
Description
Enables the Activity tab in the following portlets for users to manage the activities for people and property:
•

Addresses portlet

•

Parcels portlet

•

Owners portlet

•

Contacts portlet

•

Licensed Professional portlet

Interdependency
Parent of #1

0006-Reference Property Addresses

Parent of #2

0005-Reference Property Parcels

Parent of #3

0089-Reference Property Owners

Parent of #4

0084-Reference People Contact

Parent of #5

0008-Reference Licensed Professionals

Solution
All
Access
Addresses portlet > Activity tab
Parcels portlet > Activity tab
Owners portlet > Activity tab
Professionals portlet > Activity tab
Contacts portlet > Activity tab

0240-Reports Manager Admin
Version
6.3.2
Description
Enables the Variables settings in the Report Manager portlet for administrators to create and manage
report variables.
Interdependency

| Function IDs Reference | 335

Parent

0226-Reports Manager Admin

Solution
All
Access
Setup portlet > Report > Report Manager > Settings > Variables node
Setup portlet > Report > Report Manager > Menu button > New Variable button

0241-Parcel Subdivision and Lot Search
Version
6.4.0
Description
•

Enables the Subdivision field for the Parcels search portlet, so that administrators can search parcels
with subdivision information and can enter subdivision information about parcels.

•

Enables the Lot field for the Parcels search in Civic Platform Classic. If you disable FID 0241, the Lot
field can display in the other places except the Parcels Search page in Civic Platform Classic.

Interdependency
None
Solution
All
Access
Parcels portlet > Subdivision field in the Parcels Search, Parcels Details pages
Class Admin Tools > Property > Parcels > Subdivision and Lot fields in Parcels Search, Parcels Details
pages

0242-Required for Fee Calculation
Version
6.4.0
Description
Enables the Req for Fee Calc field in the configuration of an ASI group or an ASI table group.
Administrations can select Yes in the Req for Fee Calc field for an ASI group or a column in an ASI table,
so the field displays along with a visual indicator ($) on the application intake form, as required for fee
calculation.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > Application Spec Info > Application Specific Info - Edit
Classic Admin Tools > Application > Application Spec Info Table > Application Specific Info Table - Edit

| Function IDs Reference | 336

0243-GIS Service
Version
6.4.0
Description
Disables the Portlet URL field in the GIS Service administration function for administrators to configure the
portlet URL address that the GIS service works for.
Interdependency
None
Solution
All
Access
Classic Admin Tools > GIS > GIS Service > (In the GIS Service - Edit page) Portlet URL field

0244-Fee Estimation
Version
6.4.0
Description
Displays the Enable Fee Estimation option, as one of the Enable For ACA check boxes, in an application
type configuration. Administrators can check the Enable Fee Estimation option to enable users to create a
partial application that includes a calculation of estimated fees. Civic Platform bases the fee estimation on
the fee schedule associated with the application type.
Interdependency
Parent

0065-Admin Application Types

Parent

0075-Admin License Types

You must disable FID 0075 to hide Velocity Hall information from the application type configuration page.
Solution
All
Access
Classic Admin Tools > Application > Application Type > Application Category - Edit > Enable Fee
Estimation field.

0245-Long Term Time Tracking
Version
6.4.0
Description
•

Enables the Time Tracker Clock Action field in the Task Status administration function, for
administrators to link a task status with a time tracker clock action.

| Function IDs Reference | 337

•

Enables the Duration (Days) field in the Application Type administration function, for administrators to
configure the number of days a task should take.

•

Enables the Duration (Days) field in the Workflow Process administration function, for administrators to
configure the number of days a task should take.

•

Enables the 0245 - Long-Term Time Tracking field in the Record Type Security administration function,
for administrators to assign or not assign the feature in a record type security configuration.

•

Displays the In Possession Time (hrs) in the Task Details tab of the Record portlet, so users can view
the in possession time of a task.

Interdependency
None
Solution
All
Access
Classic Admin Tools > Work Flow > Task Status > (After selecting a task status) Time Tracker Clock
Action field
Classic Admin Tools > Application > Application Type > (After selecting an application type) Duration
(Days) field
Classic Admin Tools > Workflow > Process > (After selecting a process) Duration (Days) field
Setup portlet > Application > Record Type Security > (When assigning a record type security) 0245 - LongTerm Time Tracking field
Record portlet > Workflow tab > (After selecting a task) In Possession Time (hrs) field in the Task Details
tab

0246-Activities Specific Information
Version
6.4.0
Description
•

Enables the Activity Specific Info portlet for administrators to create and manage activity specific info
groups.

•

Enables the Activity Type portlet for administrators to create activity types and manage activity types,
and link activity types to activity specific info groups.

Interdependency
None
Solution
All
Access
Setup portlet > Workflow & Activity > Activity Specific Info
Setup portlet > Workflow & Activity > Activity Type

| Function IDs Reference | 338

0247-Agency Workday Calendar
Version
6.4.0
Description
Enables the Agency Workday as a calendar type in the calendar management in Civic Platform Classic, so
users can configure agency work days.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Calendar > Calendar > Agency Workday option in Type field

0248-Admin-Security Policy-EDMS Access Security
Version
6.4.0
Description
Enable the EDMS Access Security for administrators to perform the following tasks:
•

Specify which EDMS sources are valid for each of the Civic Platform modules

•

Determine which users can upload and download text documents and download images from a certain
EDMS source

FID 0248 enables administrators to set up authentication by site or by user to upload and download
documents.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Agency Profile > Security Policy > EDMS Access Security link > Authentication
option

0249-Workflow Edit
Version
6.4.1
Description
Displays the Module field in the Workflow - Edit and Workflow - Add pages, so administrators can specify
whether the current workflow hierarchy applies to a specific module, or all the modules.
Interdependency

| Function IDs Reference | 339

Parent

0112-Admin Workflow

Solution
All
Access
Classic Admin Tools > Workflow > Workflow > Workflow-Edit or Workflow - Add page

0250-People Info Table
Version
6.4.1
Description
Enables the People Info Table administration function for administrators to configure template tables as
additional field tables for licensed professionals and contacts.
Interdependency
None
Solution
All
Access
Classic Admin Tools > People > People Info Table

0251-Hearing Reason
Version
6.4.2
Description
Enables the Hearing Reason administration function for administrators to add and manage hearing
reasons.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Calendar > Hearing Reason

0252-Asset Type Available CAP Type
Version
6.4.1
Description
Enables the Work Order Types tab in the Asset Type portlet for administrators to perform the following
tasks:

| Function IDs Reference | 340

•

View the associated work order types list

•

Assign work order types to the asset type, or delete the association

Interdependency
Parent

0160-Admin AMS Asset Definition

Solution
AMS
Access
Setup portlet > Assets > Type > Work Order Types tab

0253-Asset GIS Synchronize
Version
6.4.1
Description
With the “Master Inventory in GIS” option checked for the asset type, enables the Sync with GIS button for
synchronization of asset type records with GIS. Administrators can perform the following tasks:
•

Synchronize asset type records with GIS

•

View the GIS sync log

Interdependency
Parent

0160-Admin AMS Asset Definition

Solution
Accela Asset Management
Access
Setup portlet > Assets > Type > Sync with GIS button

0254-WO Task Definition
Version
6.5.0
Description
Enables the Work Order Task administration portlet, and the Work Order Task tab in the Work Order
Template administration portlet, so administrators can perform the following tasks:
•

View the work order task configurations

•

Create, search and delete work order tasks

•

Look up work order tasks and associate work order tasks with a work order template

Interdependency
Interoperation

0169-Admin - Work Order Template

| Function IDs Reference | 341

Child

0306-Work Order Type

Solution
Accela Asset Management
Access
Setup portlet > Work Orders > Work Order Task
Setup portlet > Work Orders > Work Order Template > Work Order Task tab

0255-Manage Asset Type Security
Version
6.5.0
Description
Enables the Asset Type Security portlet for administrators to establish security levels for asset types.
Interdependency
None
Solution
All
Access
Setup portlet > Assets > Security

0256-Carrying over Failed Guide Sheet Items
Version
6.5
Description
Enables the Carry Over Failed Items configuration option in the Reference Guide Sheet function for
administrators to mark the option for carrying over failed items from a previous guidesheet to a new one for
the next inspection.
Interdependency
None
Solution
Building
Access
Classic Admin Tools > Inspection > Guide Sheet > Carry Over Failed Items configuration option in the
Reference Guide Sheet edit page

0257-Admin Inspection Calendar
Version
6.5
Description

| Function IDs Reference | 342

Enables the Inspection calendar option in the Calendar administration portlet, so administrators can
perform the following tasks:
•

View all the calendars of Inspection type

•

Create new calendars of Inspection type

Interdependency
None
Solution
All
Access
Setup portlet > Calendar > Inspection type in the Type field

0258-Supervisor Inspection Calendaring
Version
6.5
Description
Enables the Supervisor Maintenance function in the Calendar administration portlet for supervisors to
manages and assigns inspectors to calendars.
Interdependency
Child

0258-Supervisor Inspection Calendaring

Solution
All
Access
Setup portlet > Calendar > Supervisor Maintenance tree node

0259-ASI Lookup Table
Version
6.5
Description
Enables the ASI Lookup Table portlet for administrators to configure and manage ASI lookup tables.
Interdependency
None
Solution
All
Access
Setup portlet > Application > ASI Lookup Tables

| Function IDs Reference | 343

0260-Expression Builder
Version
6.5
Description
Enables the Expression Builder portlet for administrators to configure and manage expressions for target
portlets.
Interdependency
None
Solution
All
Access
Setup portlet > Application > Expression Builder

0261-ASI Form Layout Editor
Version
6.5
Description
Enables the ASI Form Layout Editor portlet for administrators to perform the following tasks:
•

Create ASI screens that display in the ASI section of an application based on the application type

•

Add, customize and manipulate the size of each ASI fields in the ASI screens

•

Use the buttons in the administration portlet to preview, align, add dynamic text, draw lines and insert
tables

•

Set permissions for modules, groups, and users

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > ASI Form Layout Editor

0263- Admin Event Calendar (obsolete, replaced by 8483)
Version
6.5
Description
•

Enables the Event calendar type in the Calendar administration portlet, so administrators can perform
the following tasks:

| Function IDs Reference | 344

•

•

View all the calendars of Event type

•

Create new calendars of Event type

Enables the Event Type Maintenance function in the Calendar portlet for administrators to configure
event types with event calendar type.

Interdependency
None
Solution
All
Access
Setup portlet > Calendar > Event type in the Type field
Setup portlet > Calendar > Event Type Maintenance tree node > Event option in Calendar Type field

0264-Admin Time Accounting Type
Version
6.6.0
Description
•

Enables the Time Accounting Type Maintenance portlet for administrators to add and manage time
accounting types.

•

Enables the Time Accounting Types tab in the Time Accounting Group portlet for administrators to
associate time accounting types with time accounting groups.

Interdependency
Parent of #2

0266-Admin Time Accounting Group

Solution
All
Access
Setup portlet > Time Accounting > Type Maintenance

0265-Admin Time Accounting User Profile
Version
6.6.0
Description
Enables the User Profile portlet for administrators to add and manage time accounting user profiles.
Interdependency
None
Solution
All
Access

| Function IDs Reference | 345

Setup portlet > Time Accounting > User Profile

0266-Admin Time Accounting Group
Version
6.6.0
Description
Enables the Time Accounting Group portlet for administrators to add and manage time accounting groups.
Interdependency
Child

0264-Admin Time Accounting Type

Solution
All
Access
Setup portlet > Time Accounting > Group

0267-TSI Form Layout Editor
Version
6.6.0
Description
Enables the TSI Form Layout Editor portlet for administrators to perform the following tasks:
•

Create TSI screens that display in the task-specific information section of a workflow task based on the
task

•

Add, customize and manipulate the size of each TSI fields in the TSI screens

•

Use the buttons in the administration portlet to preview, align, add dynamic text, draw lines and insert
tables

•

Set permissions for modules, groups, and users

Interdependency
None
Solution
All
Access
Setup portlet > Workflow & Activity > TSI Form Layout Editor

0268-APO Form Layout Editor
Version
6.6.0
Description

| Function IDs Reference | 346

Enables the APO Form Layout Editor portlet for administrators to perform the following tasks:
•

Create APO Type screens that display at the bottom of the APO Type section when users create a new
application

•

Add, customize and manipulate the size of each APO fields in the APO Type screen

•

Use the buttons in the administration portlet to preview, align, add dynamic text, draw lines and insert
tables

•

Set permissions for modules, groups, and users

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > APO Form Layout Editor

0269-Admin Attribute Form Layout Editor
Version
6.6.0
Description
Enables the asset Form Layout Editor portlet for administrators to perform the following tasks:
•

Create asset screens that display in the Asset Detail form of an asset based on the asset type

•

Add, customize and manipulate the size of each asset fields in the asset screens

•

Use the buttons in the administration portlet to preview, align, add dynamic text, draw lines and insert
tables

•

Set permissions for modules, groups, and users

Interdependency
None
Solution
All
Access
Setup portlet > Assets > Form Layout Editor

0270-Sequence Generator
Version
6.6.0
Description
Enables the Sequence Generator portlet for administrators to define and manage the numbering sequence
and masks in different types of items, such as permits, invoices, and receipts.

| Function IDs Reference | 347

Interdependency
Interoperation

8097-Manual Application Number Option

Solution
All
Access
Setup portlet > System Tools > Sequence Generator

0272-Control Shared Drop Down List in Admin
Version
6.6.0
Description
Enables the Shared Drop-Down List portlet for administrators to create shared drop-down lists, and apply
them to the groups and templates, including activity-specific information groups, APO templates, ASI
groups, asset attributes, people templates and info tables, and task specific information groups.
Interdependency
None
Solution
All
Access
Setup portlet > Application > Shared Drop-Down List

0273-ASI Table Drill Down
Version
6.6.1
Description
Enables the ASI Drill-down portlet for administrators to configure ASI and ASI table drill-downs and then
add them in the application or the App Spec Info tab in Civic Platform and Citizen Access.
Interdependency
None
Solution
All
Access
Setup portlet > Drill-Down > ASI Drill-down

0274-Rating Type
Version
6.6.0
Description

| Function IDs Reference | 348

Enables the Rating Type administration portlet, the Calculated Rating Types tab in the Condition
Assessment administration portlet, and the Rating Types tab in the Asset Type administration portlet, so
users can perform the following tasks:
•

View the existing rating types configuration

•

Create, search, edit and delete rating types

•

View the rating types associated with condition assessment types

•

View the rating types associated with asset types

Interdependency
Interoperation

0160-Admin AMS Asset Definition

Interoperation

0227-Condition Assessment

Solution
All
Access
Setup portlet > Assets > Rating Type
Setup portlet > Assets > Condition Assessment > Calculated Rating Types tab
Setup portlet > Assets > Type > Rating Types tab

0275-Condition by Group
Version
6.6.0
Description
•

Enables the Condition by Group tree node in the Conditions administration portlet, so administrators
can manage conditions by groups.

•

Enables the New Group item in the Conditions administration portlet, so administrators can create new
condition groups.

Interdependency
None
Solution
All
Access
Setup portlet > Conditions > Conditions > (In the Conditions tree) Condition by Group node
Setup portlet > Conditions > Conditions > (Right clicking in the Conditions tree) New Group item

0276-Address Type Group
Version
6.6.0
Description

| Function IDs Reference | 349

Enables the Address Type Group portlet for administrators to define and manage address type groups.
Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Address Type Group

0277-Address Type for the reference address
Version
6.6.0
Description
Enables the Address Type tab for the Addresses portlet, so users to specify the address type for an
address.
Interdependency
Parent

0006-Reference Property Addresses

Solution
All
Access
Addresses portlet > Address Type tab

0278-Associate People
Version
6.6.0
Description
Enables the Associated People tab in the Trust Account portlet for users to manage the relationship
between trust accounts and licensed professionals or contacts.
Interdependency
Parent

0190-Manage Trust Account

Child

0084-Reference People Contact

Child

0008-Reference Licensed Professionals

Solution
All
Access
Trust Account portlet > Associated People

| Function IDs Reference | 350

0279-Associate Address
Version
6.6.0
Description
Enables the Associated Address tab in the Trust Account portlet for users to manage the relationship
between trust accounts and addresses.
Interdependency
Parent

0190-Manage Trust Account

Solution
All
Access
Trust Account portlet > Associated Address

0280-Associate Parcel
Version
6.6.0
Description
•

Enables the Associated Parcel tab in the Trust Account portlet for users to manage the relationship
between trust accounts and parcels.

•

Enables the Associated Trust Account tab in the reference parcel portlet, so users can copy or move
associated trust accounts between genealogically related reference parcels.

Interdependency
Parent

0190-Manage Trust Account

Solution
All
Access
Trust Account portlet > Associated Parcel
Parcel portlet > Associated Trust Account tab

0281-Supervisor Master Calendaring
Version
6.6.0
Description
Enables the Master Calendar tab in the Supervisor Maintenance function of the Calendar administration
portlet for supervisors to assign multiple calendars to some inspectors and create a master calendar.
Interdependency

| Function IDs Reference | 351

Parent

0281-Supervisor Master Calendaring

Solution
All
Access
Setup portlet > Calendar > Supervisor Maintenance tree node > Master Calendar tab

0282-Expression Migration
Obsolete.

0283-Associated CAP List
Version
6.6.1
Description
Enables the Associated Record List tab in the Licensed Professionals portlet for users to manage
associated record list for licensed professionals.
Interdependency
Parent

0008-Reference Licensed Professionals

Solution
All
Access
Licensed Professionals portlet > Associated Record List tab

0284-Batch Job Maintenance
Version
6.7.0
Description
Any of the following FIDs can enable the Batch Engine administration portlet:
•

0106-Admin Batch job (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

•

0284-Batch Job Maintenance (the list portlet and the Job Detail tab) and 0285-Batch Job Schedule (the
Job Schedule tab and the Log tab)

•

8122-Batch Job (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

•

8049-Batch Job (old) (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

Interdependency
Child

0285-Batch Job Schedule

Interoperation

0106-Admin Batch job

| Function IDs Reference | 352

Interoperation

8122-Batch Job

Interoperation

8049-Batch Job (old)

Solution
All
Access
Setup portlet > System Tools > Batch Engine
Batch Jobs portlet

0285-Batch Job Schedule
Version
6.7.0
Description
If you disable FIDs 0106, 8122, and 8149, and enable FID 0284, this FID:
•

Enables the Job Schedule and Log tabs in the Batch Engine administration portlet for users to configure
a batch job schedule and to view the batch job logs.

•

Enables the Execute button in the Batch Engine administration portlet for users to execute a batch job.

•

Enables the Stop button in the Job Detail tab of the Batch Engine administration portlet for users to stop
a batch job.

Interdependency
Parent

0284-Batch Job Maintenance

Solution
All
Access
Setup portlet > System Tools > Batch Engine > Job Schedule tab
Setup portlet > System Tools > Batch Engine > Log tab

0286-Delegate User Management
Version
6.7.0
Description
Controls access to functions in the Delegate User portlets.
•

Full access: Users can create, update, view, delete, and search delegate user relationships in the
Delegate User portlet. User can also search and view Delegate User relationship history in the Delegate
User History portlet.

•

Read only: Users can view and search Delegate User relationships in the Delegate User portlet and
Delegate User History. User cannot create, update, or delete Delegate User relationships.

•

No access: The Delegate User Portlet does not display to the user.

| Function IDs Reference | 353

Table 122: FID 0286 Delegate User Management
FID Access Setting

Super Agency
Administrator

Delegate User from Super Sub-Agency
Agency
Administrator

Full Access set at both
the Parent and Subagencies

User has full-access. User
can create, update, view,
delete, and search delegate
user relationships in the
Delegate User portlet. User
can also search and view
Delegate User relationship
history in the Delegate User
History portlet.

User has full-access at
both agencies. User can
create, update, view,
delete, and search delegate
user relationships in the
Delegate User portlet. User
can also search and view
Delegate User relationship
history in the Delegate User
History portlet.

User has full-access. User
can create, update, view,
delete, and search delegate
user relationships in the
Delegate User portlet. User
can also search and view
Delegate User relationship
history in the Delegate User
History portlet.

User has full access
permissions at the Super
Agency and Read-only
permissions at the Subagency.

Read Only Permissions:
User can view and search
Delegate User relationships
in the Delegate User portlet
and Delegate User History.
User cannot create, update,
or delete Delegate User
relationships.

Full Access set at Super User has full-access. User
Agency and Read Only can create, update, view,
set at Sub-agency.
delete, and search delegate
user relationships in the
Delegate User portlet. User
can also search and view
Delegate User relationship
history in the Delegate User
History portlet.

Full Access set at Super User has full-access. User Full Access at super
Agency and No Access can create, update, view,
agency. No access at Subset at the Sub-agency.
delete, and search delegate agency.
user relationships in the
Delegate User portlet. User
can also search and view
Delegate User relationship
history in the Delegate User
History portlet.

No Access.

Read Only set at Super
Agency. Full Access to
Sub-agency.

Read Only Permissions:
Read Only permissions at
User can view and search
Super Agency. Full Access
Delegate User relationships Sub-agency
in the Delegate User portlet
and Delegate User History.
User cannot create, update,
or delete Delegate User
relationships.

User has full-access. User
can create, update, view,
delete, and search delegate
user relationships in the
Delegate User portlet. User
can also search and view
Delegate User relationship
history in the Delegate User
History portlet.

No Access at Super
Agency. Read Only
Access at Sub-agency.

No Access.

Read Only Permissions:
User can view and search
Delegate User relationships
in the Delegate User portlet
and Delegate User History.
User cannot create, update,
or delete Delegate User
relationships.

Interdependency
None
Solution
All
Access
Setup portlet > System Tools > Delegate User

No Access at Super
Agency. Read Only Access
at Sub-agency.

| Function IDs Reference | 354

0288-Enable Inspection Flow
Version
6.7.0
Description
Enables the Inspection Flow option in the inspection group configuration, so administrators can select the
option, and configure inspection flow for an inspection group.
Interdependency
Parent

0133-Admin Inspection Type Sets

Interoperation

0289-Enable Inspection Milestone

FIDs 0288 and 0299 control the two methods for determining the order of the inspection types in the
inspection group according to the following settings:
•

FID 0288 full access and FID 0289 full access. The Inspection Flow, Inspection Milestone, and None
options in Civic Platform. This gives the agency administrator the option to assign a manual inspection
flow, an inspection milestone, or no required flow to the inspection group.

•

FID 0288 full access and FID 0289 no access. The Inspection Flow and None options display in Civic
Platform. This setting allows the agency administrator to either assign a manual inspection flow or no
flow to the inspection group.

•

FID 0288 no access and FID 0289 full access. The Inspection Milestone and None options display in
Civic Platform. This setting allows the agency administrator to either assign an inspection milestone
flow or no flow to the inspection group.

Solution
All
Access
Classic Admin Tools > Inspection > Inspection > Inspection -Edit Page > Inspection Flow option and
Inspection Flow button

0289-Enable Inspection Milestone
Version
6.7.0
Description
Enables the Inspection Milestone option in the inspection group configuration, so administrators can select
the option, and configure inspection milestones for an inspection group.
Interdependency
Parent

0133-Admin Inspection Type Sets

Interoperation

0288-Enable Inspection Flow

FIDs 0288 and 0299 control the two methods of determining the order of the inspection types in the
inspection group according to the following settings:

| Function IDs Reference | 355

•

FID 0288 full access and FID 0289 full access. The Inspection Flow, Inspection Milestone, and None
options in Civic Platform. This gives the agency administrator the option to assign a manual inspection
flow, an inspection milestone, or no required flow to the inspection group.

•

FID 0288 full access and FID 0289 no access. The Inspection Flow and None options display in Civic
Platform. This setting allows the agency administrator to either assign a manual inspection flow or no
flow to the inspection group.

•

FID 0288 no access and FID 0289 full access. The Inspection Milestone and None options display in
Civic Platform. This setting allows the agency administrator to either assign an inspection milestone
flow or no flow to the inspection group.

Solution
All
Access
Classic Admin Tools > Inspection > Inspection > Inspection -Edit Page > Inspection Milestone option and
Inspection Flow button

0290-Admin - Standard Comments
Version
6.7.0
Description
Enables the Standard Comments administration portlet for users to configure standard comment groups
and standard comment types, and to add standard comments.
Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Standard Comments

0291-Guide Sheet Template Data
Version
6.7.0
Description
Enables the Application Specific Info Group in the Guide Sheet administration function, so administrators
can use the ASI and ASI table definitions for guidesheet options such as fields, drop-down lists, and check
boxes.
Interdependency
Parent

Solution
All
Access

0124-Admin Inspection Guide Sheet

| Function IDs Reference | 356

Classic Admin Tools > Inspection > Guide Sheet > Application Specific Info Group field

0292-Service Management
Version
6.7.0
Description
Enables the Service portlet for administrators to perform the following tasks:
•

View the services that users can view when logged into Citizen Access

•

Add services for users to view in Citizen Access

•

Associate services with license types and address types

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Service

0294-Structure and Establishment
Version
6.7.0
Description
Controls the Structures and Establishments link in the Accela Administrator Setup portlet, and enables
the Structures & Establishments - Type portlet for administrators to configure and manage structure and
establishment types.
Interdependency
Child

0158-Admin Attribute Definition

Child

0159-Admin Attribute Template Definition

Solution
All
Access
Setup portlet > Structures & Establishments
Setup portlet > Structures & Establishments > Type

0295-Reference Structure and Establishment
Version
6.7.0

| Function IDs Reference | 357

Description
•

Enables the Structures & Establishments portlet for users to manage reference structures and
reference establishments.

•

Enables the Structures & Establishments tab in the Parcels portlet for users to manage the reference
structures and reference establishments associated with reference parcels, and copy or move
associated structures or establishments between genealogically related reference parcels.

Interdependency
Child of #1

0296-Structure and Establishment Condition

Child of #1

0005-Reference Property Parcels

Child of #1

0006-Reference Property Addresses

Child of #1

0008-Reference Licensed Professionals

Parent of #2

0005-Reference Property Parcels

Solution
All
Access
Structures & Establishments portlet
Parcels > Structures & Establishments tab

0296-Structure and Establishment Condition
Version
6.7.0
Description
Enables the Conditions tab in the Structures & Establishments portlet for users to add and manage
conditions for structures & establishments.f
Interdependency
Parent

0295-Reference Structure and Establishment

Child

0297-Structure and Establishment History

Solution
All
Access
Structures & Establishments portlet > Conditions tab

0297-Structure and Establishment History
Version
6.7.0
Description
Displays the Condition History tab when users click a condition in the Condition tab of the Structures &
Establishments portlet.

| Function IDs Reference | 358

Interdependency
Parent

0296-Structure and Establishment Condition

Solution
All
Access
Structures & Establishments portlet > Conditions tab > (After selecting a condition) Condition History tab

0299-Super License Management
Version
6.7.0
Description
Enables the Product License portlet for administrators to view product licenses or import product licenses.
Interdependency
None
Solution
Superagency
Access
Setup portlet > System Tools > Product License

0300-License Management
Version
6.7.0
Description
Enables the Product License portlet for administrators to view product licenses or import product licenses.
Interdependency
None
Solution
All
Access
Setup portlet > System Tools > Product License

0305-Admin Attribute Table Definition
Version
7.0.0
Description
•

Enables the Attribute Table administration portlet for assets, so administrators can configure attribute
tables.

| Function IDs Reference | 359

•

Enables the Attribute Tables tab in the Attribute Template administration portlet for both assets and
structures & establishments, so administrators can associate attribute tables with attribute templates.

Interdependency
Parent of #2

0159-Admin Attribute Template Definition

Solution
Accela Asset Management
Access
Setup portlet > Assets > Attribute Table
Setup portlet > Assets > Attribute Template > Attribute Tables tab
Setup portlet > Structures & Establishments > Attribute Template > Attributes tab

0306-Work Order Type
Version
7.0.0
Description
Enables the Work Order Types tab in the Work Order Task portlet for administrators to perform the
following tasks:
•

View the work order types associated to work order tasks

•

Assign a work order type to a work order task, or delete the association

Interdependency
Parent

0254-WO Task Definition

Solution
Accela Asset Management
Access
Setup portlet > Work Orders > Work Order Task > Work Order Types tab

0307-Audit Logger Definition
Version
7.0.0
Description
Enables the Audit Log portlet for administrators to configure the fields to display for each audit log.
Interdependency
An audit log type (record/ASI/ASIT, guidesheet, record condition, reference condition, standard condition,
document) only works after super agency administrator enables the audit log options in the agency
configuration.
Solution
All
Access

| Function IDs Reference | 360

Setup portlet > System Tools > Audit Log

0308-Data Manager Export
Version
7.0.0
Description
Enables the Export Jobs panel in the Data Manager portlet for administrators to perform the following
tasks:
•

Configure export jobs

•

Export record types and their associated elements

•

Export Standard Choices

•

Export Citizen Access Configuration

•

Export asset management data

Interdependency
Parent

0318-Administration

Interoperation

0309-Data Manager Import

Solution
All
Access
Setup portlet > Administration > AA Admin > Data manager > Export Jobs panel

0309-Data Manager Import
Version
7.0.0
Description
Enables the Import Jobs panel in the Data Manager portlet for administrators to perform the following
tasks:
•

Configure import jobs

•

Import record types and their associated elements

•

Import Standard Choices

•

Import Citizen Access Configuration

•

Import asset management data

Interdependency
Interoperation

0308-Data Manager Export

| Function IDs Reference | 361

Parent

0318-Administration

Solution
All
Access
Setup portlet > Administration > AA Admin > Data manager > Import Jobs panel

0310-Admin Education Info
Version
7.0.0
Description
Enables the Education portlet for administrators to create and manage education records, including
associating the education records with education providers.
Interdependency
None
Solution
All
Access
Setup portlet > License Certifications > Education

0311-Admin Continuing Education Info
Version
7.0.0
Description
Enables the Continuing Education portlet for administrators to perform the following tasks:
•

Create and manage continuing education records, including associating the continuing education
records with providers and record types.

•

Assign a workflow task to continuing education at the record type level.

Interdependency
None
Solution
All
Access
Setup portlet > License Certifications > Continuing Education

0312-Admin Examination Info
Version
7.0.0

| Function IDs Reference | 362

Description
Enables the Examination portlet for administrators to perform the following tasks:
•

Create and manage examination records, including associating the examination records with
examination providers.

•

Assign a workflow task to examinations at the record type level.

Interdependency
None
Solution
All
Access
Setup portlet > License Certifications > Examination

0314-Admin Meeting Calendar
Version
7.3
Description
•

•

Enables the meeting calendar type in the calendar administration portlet, so administrators can perform
the following tasks:
•

View all the calendars of Meeting type

•

Create new calendars of Meeting type

Enables the Meeting Type Maintenance function in the Calendar administration navigation tree for
administrators to configure meeting types.

Interdependency
None
Solution
All
Access
Setup portlet > Calendar > Meeting type in the Type field
Setup portlet > Calendar > Meeting Type Maintenance tree node > Meeting option in Calendar Type field

0315-Admin Create New Objects
Version
7.0.0
Description
Enables the Create New button on the toolbar of the Civic Platform console. Users can click the button to
select from a drop‑down menu of options for creating records or performing other operational tasks.

| Function IDs Reference | 363

Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Create New Objects
Civic Platform Console Toolbar > Create New menu button

0316-Reference Contact Condition
Version
7.0.0
Description
Enables the Condition tab in the Contacts portlet for users to manage conditions for contacts.
Interdependency
Child

0317-Reference Contact Condition History

Solution
All
Access
Contacts portlet > Conditions tab

0317-Reference Contact Condition History
Version
7.0.0
Description
Displays the Condition History tab when users click a condition in the Condition tab of the Contacts portlet.
Interdependency
Parent

0316-Reference Contact Condition

Solution
All
Access
Contacts portlet > Conditions tab > (After selecting a condition) Condition History tab

| Function IDs Reference | 364

0318-Administration
Version
7.0.0
Description
Enables the AA Admin administration portlet under Setup Administration for administrators to configure
record types and configure data manager.
Interdependency
Child

0308-Data Manager Export

Child

0309-Data Manager Import

Child

0065-Admin Application Types

Solution
All
Access
Setup portlet > Administration > AA Admin

0319-Delete ASI and ASIT on existing CAPs
Version
7.0.0
Description
•

Provides the “Delete associated transactional data of previous ASI and ASIT on existing records” option
in a pop-up window after users change the Application Specific Info Group Code field and then click the
Save button in the Application Type - Edit page.

•

Provides the “Delete associated transactional records of previous ASI and ASIT on existing CAPs”
option in a pop-up window after users change the Application Specific Info Group field and then click
the Save button in the Application Specific Info - Edit and Manage Subgroups page.

Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > Application Type > After clicking Save in the Application Type - Edit
page
Classic Admin Tools > Application > Application Specific Info > After clicking Save in the Application
Specific Info - Edit and Manage Subgroups page

0320-Admin License Verification
Version

| Function IDs Reference | 365

7.0.0
Description
Enables the License Verification portlet for administrators to define the record type and insurance/license
type expiration relationship by setting permissions and assigning expired license types to application types.
Interdependency
None
Solution
All
Access
Setup portlet > Application > License Verification

0321-Reference Address Copy
Version
6.7.0
Description
Enables the Copy button in the Addresses portlet, so users to create new addresses by copying from
existing ones.

Interdependency
Parent

0006-Reference Property Addresses

Solution
All
Access
Addresses portlet > Copy button

0322-Reference Merge Contacts
Version
6.7.0
Description
Enables the Merge button in the Contacts portlet for users to merge two or more contacts into one.
Interdependency
Parent

Solution
All
Access
Contacts portlet > Merge

0084-Reference People Contact

| Function IDs Reference | 366

0323-Disable Licensed Professionals Search
Version
6.7.0
Description
When enabled, this FID disables the Search button in the Licensed Professionals portlet, so users cannot
search for licensed professionals.
Interdependency
Parent

0008-Reference Licensed Professionals

Solution
All
Access
Licensed Professionals portlet > Search button

0324-Admin Receipt Print Audit
Version
6.7.0
Description
Enables the Receipt Print Audit portlet for administrators to view receipt print audit records and to search
receipt print audit records.
Interdependency
None
Solution
All
Access
Setup portlet > System Tools > Receipt Print Audit

0326-Define Asset Usage Unit Type
Version
7.0.5
Description
Enables the Usage Types tab in the Asset Type portlet for administrators to perform the following tasks:
•

View the usage types list

•

Look up usage types and assign to the asset type, or delete the association

Interdependency
Parent

Solution

0160-Admin AMS Asset Definition

| Function IDs Reference | 367

Accela Asset Management
Access
Setup portlet > Assets > Type > Usage Types tab

0327-Edit My QuickQuery By Administration
Version
7.0.5
Description
Enables the My QuickQueries portlet for administrators to perform the following tasks:
•

Specify a portlet and view user-defined QuickQueries in the portlet. The QuickQuery name and user ID
identifies each QuickQuery.

•

Edit or delete user-defined QuickQueries

Interdependency
Parent

0139-Admin-DataFilter/QuickQuery

Solution
All
Access
Setup portlet > Data Filter & Query > My QuickQueries

0328-Accessibility Mode
Version
7.0.5
Description
Enables section 508 accessibility mode in Civic Platform and Citizen Access.
Interdependency
None
Solution
All
Access
All

0330-Admin Work Order Costing Group Definition
Version
7.1.0
Description
Enables the Cost Group portlet for administrators to define and manage cost groups.
Interdependency

| Function IDs Reference | 368

Child

0161-Admin Work Order Costing Item Definition

Solution
Accela Asset Management
Access
Setup portlet > Work Orders > Cost Group

0331-Trust Account Associated Record
Version
7.1.0
Description
Enables the Associated Record tab in the Trust Account portlet for users to view all the records related to a
trust account.
Interdependency
Parent

0190-Manage Trust Account

Solution
All
Access
Trust Account portlet > Associated Record tab

0332-Daily Cost Rate Definition
Version
7.1.0
Description
•

Enables the Cost Rate tab in the Work Order Cost Item portlet for administrators to create and manage
cost rates for cost items.

•

Enables the Cost Rate tab in the Time Accounting User Profiles portlet for administrators to create and
manage cost rates for user profiles.

•

Enables the Cost Rates tab in the Assets portlet for users to create and manage cost rates for assets.

Interdependency
Parent of #1

0161-Admin Work Order Costing Item Definition

Parent of #2

0265-Admin Time Accounting User Profile

Parent of #3

8189-Asset Data Management

Solution
Accela Asset Management
Access
Setup portlet > Work Orders > Cost Item > Cost Rates tab
Setup portlet > Time Accounting > User Profiles > Cost Rates tab

| Function IDs Reference | 369

Assets portlet > Cost Rates tab

0333-Condition List Audit Log
Version
7.1.0
Description
•

Enables the View Log button in the Condition Maintenance administrator portlet for administrators to
view condition audit log information.

•

Enables the View Log button in various portlets, and then provide the condition as an audit type option
for users to view the historical logs on conditions.

Interdependency
The audit log works only if the super agency administrator enables the standard condition audit log option
in the agency configuration.
Parent

8458-Complete Record and ASI Audit

Solution
All
Access
Setup portlet > Condition > Condition Maintenance list portlet > View log button
Record portlet > View Log button > Record Details Log button option > Record Condition option in Audit
Type in the Audit Log page
Parcels portlet > View Log button
Owners portlet > View Log button
Licensed Professionals portlet > View Log button
Structure & Establishment portlet > View Log button
Assets portlet > View Log button

0334-Condition Detail Audit Log
Version
7.1.0
Description
•

Enables the View Log button in the Condition detail tab of the Condition Maintenance administrator
portlet for administrators to view condition audit log information.

•

Enables the View Log button in the Condition tab in various portlets for users to view the historical logs
on conditions.

Interdependency
The audit log works only if the super agency administrator enables the standard condition audit log option
in the agency configuration.
Solution

| Function IDs Reference | 370

All
Access
Setup portlet > Condition > Condition Details tab > View log button
Record portlet > Condition tab > View Log button
Parcels portlet > Condition tab > View Log button
Owners portlet > Condition tab > View Log button
Licensed Professionals portlet > Condition tab > View Log button
Structure & Establishment portlet > Condition tab > View Log button
Assets portlet > Condition tab > View Log button

0335-Copy or Move Parcel Associated Records
Version
7.1.0
Description
Enables the Copy and Move buttons in the Associated Record List tab of the Parcels portlet, so users can
copy or move associated records between genealogically related reference parcels.
Interdependency
None
Solution
All
Access
Parcels portlet > Associated Record List > Copy, Move buttons

0336-User Calendar
Version
7.1.0
Description
Enables the User calendar option in the Calendar administration portlet, so administrators can perform the
following tasks:
•

View all the calendars of User type

•

Create new calendars of User type

Interdependency
None
Solution
All
Access
Setup portlet > Calendar > User type in the Type field

| Function IDs Reference | 371

0337-Agency Holiday Calendar
Version
7.1.0
Description
Enables the Agency Holiday calendar option in the Calendar administration portlet, so administrators can
perform the following tasks:
•

View all the calendars of Agency Holiday type

•

Create new calendars of Agency Holiday type

Interdependency
None
Solution
All
Access
Setup portlet > Calendar > Agency Holiday type in the Type field

0338-Licensed Professional Document List
Version
7.2.0
Description
•

Enables the Documents tab in the Licensed Professionals portlet for users to upload, manage and
download documents related with a licensed professional.

•

Displays the People Attachments and Record Attachments options, in the Documents tab of the
Record portlet, so that users can click the People Attachments option to view the people attachments
associated with the record.

Interdependency
Parent

0008-Reference Licensed Professionals

Solution
All
Access
Licensed Professionals portlet > Documents tab

0339-Inspection Grade Group
Version
7.2.0
Description

| Function IDs Reference | 372

Enables the availability of the Inspection Grade Group administration portlet, so administrators can
configure inspection grade groups.
Interdependency
None
Solution
All
Access
Classic Admin Tools > Application > Inspection Grade Group

0340-Reference Contact Type Security
Version
7.2.0
Description
Enables the Reference Contacts node in the navigation tree of the Contact Type Setting portlet so
administrators can define contact type security on reference contacts.
Interdependency
None
Solution
All
Access
Setup portlet > Contact > Contact Type Setting

0341-Daily Contact Type Security
Version
7.2.0
Description
Enables the Record Contacts node in the navigation tree of the Contact Type Setting portlet so
administrators can limit the use of specific contact types by module and define contact type security on
record contacts.
Interdependency
None
Solution
All
Access
Setup portlet > Contact > Contact Type Setting

0342-Parcels GIS Attributes Mapping
Version
7.2.0

| Function IDs Reference | 373

Description
Enables the display of the GIS Attribute Mapping administration portlet.
Interdependency
None
Solution
All
Access
Setup portlet > Parcels
Setup portlet > Parcels > GIS Attribute Mapping portlet

0343-Contact Relationship
Version
7.2.0
Description
Enables the Related Contacts tab for a contact.
Interdependency
None
Solution
All
Access
Contacts portlet > Related Contacts tab

0344-Show Address on the Contact
Version
7.2.0
Description
Enables the Address tab in the Contacts portlet for users to manage reference addresses for contacts.
Interdependency
Interoperation

0006-Reference Property Addresses

Solution
All
Access
Contacts portlet > Address tab

0345-Look Up Address on the Contact Address
Version
7.2.0
Description

| Function IDs Reference | 374

Enables the Look Up button in the Contact Address tab of the reference contact portlet for users to look up
reference addresses or external addresses, modify and then save them as contact addresses.
Interdependency
The Standard Choice Value of the Standard Choice ENABLE_CONTACT_ADDRESS must be Yes, for the
Contact Address tab to display in the reference contact portlet.
Solution
All
Access
Contacts portlet > Contact Address tab

0346-Workflow Designer
Version
7.2.0
Description
Enables the graphic Workflow Designer for administrators to define workflow with master process and sub
processes.
Interdependency
FIDs control the few workflow-related functions, not available in Workflow Designer, listed below.
Interoperation

0143-Admin Workflow Task Spec Info

Interoperation

0150-Admin Workload and Skillset

Interoperation

0154-Reference Workflow Proximity Alerts

Interoperation

0180-Admin Workflow Task Spec Info Subgroups

Interoperation

0192-Workflow Report Setting

Interoperation

0234-Workflow Calendar

Interoperation

0246-Activities Specific Information

Solution
All
Access
Setup portlet > Administration > Workflow Designer

0347-Social Media
Version
7.2.0
Description
Enables the Social Media portlet for administrators to configure the integration between Civic Platform and
a social media site such as Twitter.
Interdependency
NA
Solution
All

| Function IDs Reference | 375

Access
Setup portlet > System Tools > Social Media

0348-AA-AGIS Integration Diagnosis Tool
Version
7.2.0
Description
Enables the GIS Integration Diagnostics portlet for administrators to diagnose and troubleshoot the GIS
integration issues.
Interdependency
None
Solution
All
Access
Setup portlet > System Tools > GIS Integration Diagnostics

0349-Contact Management
Version
7.2.0
Description
Enables the Standard Choices portlet for administrators to edit Standard Choices from Civic Platform
Vantage360. Currently the portlet allows you to maintain a few Standard Choices related with Contact
Management.
Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Standard Choices

0350-Regional Settings
Version
7.2.0
Description
Enables the Regional Setting portlet for administrators to define the phone number country code, and
format the ZIP code (or postal code) masks and phone number masks based on the selected country or
region.
Interdependency
None
Solution

| Function IDs Reference | 376

All
Access
Setup portlet > Agency Profile > Regional Settings

0351-Admin Set Type
Version
7.3
Description
Enable the Admin Set Type link in the Setup menu.
Interdependency
None
Solution
All
Access
Setup portlet > Application > Set Type

0352-Professional List
Version
7.2.0
Description
Enables the Professionals tab in the Contacts portlet for users to associate professionals with reference
contacts, and manage the associated professionals.
Interdependency
None
Solution
All
Access
Contacts portlet > Professionals tab

0353-Contact Identity Fields
Version
7.2.0
Description
Enables reference contact identity settings. By specifying reference contact identifier fields, administrators
can enforce the uniqueness of the contacts in the reference database and prevent users from creating
duplicate contacts.
Interdependency
None
Solution

| Function IDs Reference | 377

All
Access
Setup portlet > Contact > Identity Settings > Reference Contact

0354-Custom Dictionary
Version
7.3
Description
Enables access to the custom dictionary portlet for authorized administrators to create agency-specific
custom spell check dictionaries accessible from Civic Platform, Citizen Access, and Mobile Office, and
manage terms contained within the custom dictionaries. Custom dictionary users with “full access” can
view and manage (add/delete) entries. Users with “read only” access can view the entries, but cannot
modify them.
Interdependency
None
Solution
All
Access
Setup portlet > Agency Profile > Dictionary

0355-Reference Contact Relationship
Version
7.3
Description
Enables the Contact Relationship tab in the Contacts portlet for users to configure contact relationship
between two reference contacts.
Interdependency
None
Solution
All
Access
Contacts portlet > Contact Relationship tab

0357-Reference Contact Log
Version
7.3
Description
Enables the View Log button in the reference contact portlet for users to view the historical audit logs on
reference contacts.
Interdependency

| Function IDs Reference | 378

None
Solution
All
Access
Reference Contact > View Log > Contact Log

0360-Account Settings
Version
7.3
Description
Enables the Communication Manager - Account Settings portlet for administrators to configure accounts
from which agency users send outgoing emails and SMS text messages.
Interdependency
None
Solution
All
Access
Setup Portlet > Communication Manager > Account Settings

0361-General Settings
Version
7.3
Description
Enables the Communication Manager - General Settings portlet for administrators to configure the
connection between the Microsoft Exchange Server and Civic Platform, and establish system-level settings
for agency users.
Interdependency
None
Solution
All
Access
Setup Portlet > Communication Manager > General Settings

0362-Duplicate Contact Address Check
Description
Enables the contact address identity settings for administrators to set contact address identity fields, thus
to enforce unique identity of contact addresses in each contact.
Interdependency
None

| Function IDs Reference | 379

Solution
All
Access
Setup portlet > Contact > Identity Settings > Contact Address

0365-License Certification Info
Description
Enable access to the Education, Continuing Education, and Examination tabs on the Contact Reference
portlet.
Interdependency
None
Solution
All
Access
Contact Reference portlet > Education tab
Contact Reference portlet > Continuing Education tab
Contact Reference portlet > Examination tab

0366-License Certification Supervisor
Description
Enable/disable the Approve and Disapprove buttons. Used to validate education/exam records. After
approval, data is no longer editable in transaction records. Data remains editable in the contact reference
records.
Interdependency
None
Solution
All
Access
Application Record portlet > Education tab, Continuing Education tab, Examination tab
Contact Reference portlet > Education tab, Continuing Education tab, Examination tab

0367-Default Clone Options
Version
7.3.2
Description
Controls the availability of the Default Clone Options form on the Administration Setup portlet. Use this
form to set the default data (by record type) to copy from the source record to the new cloned record.
Solution
All

| Function IDs Reference | 380

Access
Administration > Setup > Application > Default Clone Options

0368 - Reference Contact Document List
Version
7.3.3
Description
This FID enables the Documents tab in the Contacts portlet for users to upload, manage and download
documents related with a reference contact.
Interdependency
Parent

0084-Reference People Contact

Solution
All
Access
Contacts portlet > Documents tab

0371-Professional List
Description
Enables the Look Up and Delete buttons on the Licensed Professional tab for the Structure/Establishment
detail portlet. When enabled, these buttons can be used to locate, then associate/disassociate licensed
professionals with the current structure/establishment.
Interdependency
None
Solution
All
Access
Structure & Establishment portlet

7800-Report Menu
Description
Enables the Report Menu function in Civic Platform Classic for users to access the reports that are custom
made for specific business practices.
Interdependency
None
Solution
All
Access
Classic Daily > Report > Report Menu

| Function IDs Reference | 381

7801-Ad Hoc Reports
Description
Controls exposure of the add hoc report feature.
Interdependency
None
Solution
All
Access
Classic Daily > Reports > Ad Hoc

8006-Application Print Permit
Description
Enables the Permit function in Civic Platform Classic for users to print an application permit.
Interdependency
None
Solution
All
Access
Classic Daily > Application > Permit

8014-Standard Comments and Task List
Version
2.51
Description
Enables the Task List function in Civic Platform Classic for users to view the workflow task list and to edit
the workflow task list.
Interdependency
None
Solution
Access
Classic Daily > Workflow > Task List

8020-Condition Full Privileges
Description
•

Enables the Conditions tab in the Record portlet for users to add conditions for records.

| Function IDs Reference | 382

•

Enables the Conditions tab in the Inspections portlet for users to add conditions for inspections.

•

Enables the display of the Condition Notice pop-up window when users click the condition “Learn
more...” link in the condition status bar of the record portlet.

Interdependency
None
Solution
All
Access
Record portlet > Conditions tab
Record portlet > Condition Status Bar > (After clicking the “Learn more...” link) Condition Notice pop-up
window
Inspections portlet > Conditions tab

8027-Smart Notice
Description
Enables the Smart Notice daily functions in Civic Platform Classic, so users can view the current smart
notice.
Interdependency
None
Solution
All
Access
Classic Daily > SmartManager > SmartNotice

8028-Addresses
Description
•

Enables the Address tab of the Record portlet for users to search, create, assign and manage
addresses (either reference addresses, Tidemark addresses, or daily addresses) of records.

•

Enables the Search and Clear button in the Address section of the application intake form, for users to
add reference address to a new application.

Interdependency
Child

8175-GIS Objects

Child

8227-PermitsPlus Search Address

Child

8303-Synchronize function in APO

Solution
All
Access
Record portlet > Address tab

| Function IDs Reference | 383

Record portlet > New > (In the application intake form) Address section > Search and Clear buttons

8029-Parcels
Description
•

Enables the Parcel tab in the Record portlet for users to add and manage parcels of an application.

•

Enables the Search and Clear buttons in the Parcel section of the application intake form, for users to
search reference parcels and add them to a record.

Interdependency
Child of #1

8281-Inspector Districting

Child of #1

8327-Search Select Parcel Function

Solution
All
Access
Record portlet > Parcel tab
Record portlet > New > (In the application intake form) Parcel section > Search and Clear buttons

8030-Owners
Description
•

Enables the Owner tab of the Record portlet for users to assign and manage owners of records.

•

Enables the Search and Clear buttons in the Owner section of the application intake form, for users to
search reference owners and add them to a record.

Interdependency
None
Solution
All
Access
Record portlet > Owner tab
Record portlet > New > (In the application intake form) Owner section > Search and Clear buttons

8031-Contacts
Description
•

Enables the Contacts tab in the Record portlet

•

Enables the New, Look Up, Remove, Deactivate, Sync From the Reference, and Stop Sync menu
buttons in the Contacts tab, for users to add or manage contacts for records.

| Function IDs Reference | 384

•

Enables the New, Search, Delete, and Set Primary buttons in the contact section of the application
intake form, so users can manage the contacts for a record. This section opens when you create a new
application or you click the Summary button for a record.

Interdependency
None
Solution
All
Access
Record portlet > Contact tab
Record portlet > New > (In the application intake form) Contact section > New, Search, Delete and Set
Primary buttons

8032-Licensed Professionals
Description
Enables the Professionals tab in the Record portlet for users to add or manage licensed professionals for
records.
Interdependency
Child

8446-Disable Licensed Professionals Delete

Solution
All
Access
Record portlet > Professionals tab

8033-Additional Information
Description
•

Enables the Addtl Info tab in the Record portlet for users to view and edit additional information about
records.

•

Enables the Addtl Info area in the Additional Information tab for a record and in the Record Information
tab for an inspection. So users can view and edit additional information about records from Mobile
Office.

Interdependency
None
Solution
All
Access
Civic Platform > Record portlet > Addtl Info tab
Mobile Office > Records > Additional Information tab
Mobile Office > Inspections > Record Information tab > Additional Information subtab

| Function IDs Reference | 385

8034-New Application
Description
•

Enables the New button in the Record portlet for users to create a record.

•

Enable users to submit the staff assignments to a record successfully.

Interdependency
Interoperation with #2

8152-WO/SR Group Update

Solution
All
Access
Record portlet > New button
Record portlet > Assign menu item > (After users click the Save button) Successful assignment
Record portlet > Record Detail tab > Assign menu item > (After users click the Save button) Successful
assignment

8035-Find App
Version
2.5
Description
•

Enables the record list display in the Record portlet according to the permissions for the current user.

•

When you disable FID 8150, FID 8035 enables the Advanced Search link in the Find Application
function in Civic Platform Classic . When users click the Advanced Search link, the Find Application
- Search page displays the standard application search fields. When you enable FID 8150, the Find
Application - Search page displays the search fields, as customized in the Find Application Profile
administration function.

•

Enables the Record Search for the Select Record to Copy From function available in the Inspections
portlet, or the Inspections tab of the Record portlet.

Interdependency
Interoperation with #2

8150-Find App (Custom)

Interoperation with #2

8035-Find App

Parent of #3

8299-Daily-ODS Inspection Gaps

.
Solution
All
Access
Record portlet
Classic Daily > Application > Find App > Advanced Search link (with FID 8068 enabled)
Classic Daily > Application > Find App (Find Application - Search page) (with FID 8068 disabled)

| Function IDs Reference | 386

Inspections portlet > Inspection Detail tab > Select Record to Copy From button > Click the Record Search
button

8036-Workflow - 2.5
Obsolete.

8038-Valuation Calculation
Description
Enables the Valuation Calc tab in the record portlet for users to calculate the total valuation (job values) for
an application based on the pre-defined standard valuations with occupancies
Interdependency
Child

8406-Edit Valuation Calculator Unit Cost

Solution
All
Access
Record portlet > Valuation Calc tab

8039-PermitsPlus Historical Data
Description
Enables the Data Source field in the Record Search portlet for users to select ‘PERMITS” Plus as the
source to search for ‘PERMITS’ Plus A/P/Ds in Civic Platform and associate them to Accela records.
Interdependency
You must configure the Standard Choice ENABLE_PERMITS_PLUS_SEARCH for the search.
Solution
All Modules except superagency
Access
Record portlet > Search button > P+ Permit Plus option in Data Source field
Record portlet > Related Records tab > Search, or Look Up button > P+ Permit Plus option in Data Source
field

8047-Hearings (obsolete, replaced by 8483)
Obsolete (see 8229 - Hearing).

| Function IDs Reference | 387

8049-Batch Job (old)
Description
Any of the following FIDs can enable the Batch Engine administration portlet:
•

0106-Admin Batch job (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

•

0284-Batch Job Maintenance (the list portlet and the Job Detail tab) and 0285-Batch Job Schedule (the
Job Schedule tab and the Log tab)

•

8122-Batch Job (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

•

8049-Batch Job (old) (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

Interdependency
Interoperation

0106-Admin Batch job

Interoperation

0284-Batch Job Maintenance

Interoperation

8122-Batch Job

Solution
All
Access
Setup portlet > System Tools > Batch Engine
Batch Jobs portlet

8068-Find App (simple search)
Description
Enables the simple search mode in the Find Application function in Civic Platform Classic. Simple search
allows users to search applications by Project Name/Application number.
Interdependency
Interdependency

8150-Find App (Custom)

Interdependency

8035-Find App

Solution
All
Access
Classic Daily > Application > Find Application

8073-App Spec Info
Version
6
Description

| Function IDs Reference | 388

•

Enables the App Specific Info tab in the Record portlet, so users can manage the ASI about a record.

•

Enables the App Specific Info section in the summary portlet for a record, so users can view the ASI
about the record.

Interdependency
None
Solution
All
Access
Record portlet > App Specific Info tab

8074-Set Header Maintenance
Version
Updated in 7.2.0
Description
•

Enables the Records list tab in the Set portlet for users to view the list of record sets.

•

Enables the New, Search, Delete, and Clone buttons for the Records tab in the set portlet.

•

Enables the Create a Set button on the Record List tab for a contact and on the Associated Record List
tab for a parcel.

•

Enables users to mark the Select Existing Set or the Create a New Set option in the Create From Model
page of the record portlet.

Interdependency
Child of #1

8075-Set Detail Maintenance

Parent of #4

8264-Create from Model

Solution
All
Access
Set portlet > Records tab
Contacts portlet > Record List tab
Parcels portlet > Associated Record List tab
Record portlet > Create From Model button > Select Existing Set option
Record portlet > Create From Model button > Create a New Set option

8075-Set Detail Maintenance
Description
Enables the records detail tabs of the Set portlet, so users can manage the details contacts for a set.
Interdependency
Parent

8074-Set Header Maintenance

| Function IDs Reference | 389

Child

8358-Set Comments

Child

8357-Set Conditions

Child

8363-Set Contacts

Child

8361-Set Licensed Professionals

Child

8362-Set Owners

Child

8359-Set Scripts

Child

8364-Set Status Change

Child

8121-Set Payment

Child

8134-Set Workflow Status Change

Solution
All
Access
Set portlet > Records tab > Detail tabs

8078-New Business License Application
Description
Enables users to create new applications in the license module in Civic Platform Classic.
Interdependency
None
Solution
Licenses
Access
Classic Daily > Application > New App > Select an application type in the license module

8079-Business Licenses Expiration Info
Description
Enables the Renewal Info tab in the Licenses portlet for users to view or edit a License's renewal
information.
Interdependency
None
Solution
License
Access
Licenses portlet > Renewal Info tab

8081-Project Maintenance/Navigation
Version
3

| Function IDs Reference | 390

Description
Enables the Project function in Civic Platform Classic for users to create and maintain projects.
Interdependency
None
Solution
All
Access
Classic Daily > Project

8085-Inspection Email Notification
Version
4.0/4.2
Description
Enables email notification in the Result Inspections function, so when users select Save in the Result
Inspections portlet, the email address confirmation page displays for entering the applicant email address
and group email address.
Interdependency
Parent

8145-Inspection Results

Solution
All
Access
Inspections portlet > Menu > Result item > After clicking Save in the Result Inspections portlet
Inspections portlet > Manage Inspection menu > Result Inspections item > After clicking Save in the Result
Inspections portlet

8090-Workflow Supervisor
Version
4.0/4.1
Description
•

Enables the Supervisor button in the Workflow tab of the Record portlet, so users have supervisory
privileges to alter the status of tasks in a workflow process.

•

Enables user to freely save/publish comments and annotations in Electronic Document Review PDF
attachments, as well as update the file review status of any reviewer.

Interdependency
Parent

8132-Workflow

Solution
All
Access
Record portlet > Workflow tab > Supervisor button

| Function IDs Reference | 391

8093-Staff Search
Version
4
Description
Controls how to display the department and staff options when users click the Dept & Staff button to
populate department information and staff information in Civic Platform Classic. If you enable the FID,
users first select the department and then pick the staff from the available list. If you disable the FID, users
provide the staff information first and then select the department and staff.
Interdependency
None
Solution
All
Access
There are a number of pages with the Dept & Staff button. For example:
Classic Daily > Condition > Condition > Condition - Edit page

8097-Manual Application Number Option
Description
Sets the Alt ID field as editable in the application intake form, record summary form, and the Record tab of
the Record portlet, so that users can manually enter the Alt ID for a record.
Interdependency
Interoperation

0270-Sequence Generator

Solution
All
Access
Record (Building, Asset, Inspection...) portlet > Application Intake Form > Alt ID field
Record (Building, Asset, Inspection...) portlet > Record tab > Alt ID field
Record (Building, Asset, Inspection...) portlet > Record tab > Summary button > Alt ID field in the summary
form

8098-Agency Switch
Description
Enables the Switch Agency link in the main console of Civic Platform Classic so users can toggle between
multiple Agencies.
Interdependency
Civic Platform can enable the ability to toggle between agencies by either FID 8403 or FID 8098. The MultiAgency switch controlled by FID 8403 offers more functionality and overrides FID 8098 Agency Switch
when you set both to Full-Access.
Solution

| Function IDs Reference | 392

All Modules
Access
Classic Daily > Switch Agency link

8099-Inspection Calendar Override Authority
Information about this item is unavailable at this time.

8102-People User Defined Attributes
Description
•

When users create a new licensed professional, displays the people template fields for entry if users
select a license type that associates with a people template.

•

When users create a new contact, displays the people template fields for entry if users select a contact
type that associates with a people template.

Interdependency
Parent of #1

0008-Reference Licensed Professionals

Parent of #2

0084-Reference People Contact

Solution
All
Access
Licensed Professionals portlet > New > (Selecting a license type that associates with a people template)
Fields from the people template in the Professional-New page
Record portlet > Professionals tab > New > (Selecting a license type that associates with a people
template) Fields from the people template in the Professional-New page
Contacts portlet > New > (Selecting a contact type that associates with a people template) Fields from the
people template in the Contact-New page
Record portlet > Professionals tab > New > (Selecting a contact type that associates with a people
template) Fields from the people template in the Contact-New page

8103-Structure Tracking
Description
Enables the Structures tab in the Record portlet for users to add and manage structures for an application.
Interdependency
None
Solution
All
Access
Record portlet > Structures tab

| Function IDs Reference | 393

8104-Assess Fees
Version
4
Description
•

Enables the Fee tab in the record portlet for users to assess one or more fee items included in the
fee schedule associated with an application, or, select several fee items and then generate invoice for
them.

•

Enables the Assess Fee History for users to view the historical actions performed in the Fee tab.

Interdependency
Child

8271-Fees Recalculate Fees

Solution
All
Access
Record portlet > Fee tab
Record portlet > Assess Fee History tab

8105-User Defined Parcel Attribute
Obsolete.

8106-Void Application
Description
Enables the Void application function in Civic Platform Classic for users to void an application.
Interdependency
None
Solution
All
Access
Classic Daily > Application > Void Application

8107-Cashier-Supervisor
Version
6.5
Description

| Function IDs Reference | 394

Enables the Adjust menu item in the Account Detail tab of the Trust Account portlet for users to adjust the
value of a trust account.
Interdependency
Parent of #2

0190-Manage Trust Account

Solution
All
Access
Trust Account portlet > Account Detail tab > Menu > Adjust menu item

8108-Cashier Payment
Version
4
Description
•

Enables the Payment tab in the record portlet for users to process a payment.

•

Enables the buttons in the Payment tab. The buttons include: Pay, Apply, Generate Receipt, Refund,
Void, and Pay More.

Interdependency
Interoperation

8436-Daily – Cashier – Apply

Interoperation

8440-Daily – Cashier – Fund Transfer

Interoperation

8439-Daily – Cashier – Generate Receipt

Interoperation

8435-Daily – Cashier – Pay

Interoperation

8445-Daily - Cashier - Pay More

Interoperation

8437-Daily – Cashier – Refund

Interoperation

8437-Daily – Cashier – Refund

If you set FID 8108 to read only or no access, the configuration for the interdependent FIDs applies to the
buttons. For example, if you enable FID 8436, the Apply button still displays.
Solution

| Function IDs Reference | 395

All
Access
Record portlet > Payment tab > Pay (Apply, Generate Receipt, Refund, and Void) button
Record portlet > Payment tab > Pay button > (In the payment details page) Pay More button

8110-Application Comment
Version
Updated in 7.2.0
Description
•

Enables the Comments tab in the Record portlet for users to view or add comments of a record.

•

Enables the display of record comments in the Record Comments field in inspection details.

Interdependency
Child

8340-Application Comments Edit

Solution
All
Access
Record portlet > Comments tab
Record portlet > Inspection tab > Inspection Details > Comments in the Record Comments field
Inspections portlet > Manage Inspection button > Schedule/Reschedule Inspections > Comments in the
Record Comments field
Inspections portlet > Inspection Detail tab > Comments in the Record Comments field

8112-Application Cloning
Description
Enables the Clone and Copy menu items in the Record tab of the Record portlet, so users can clone or
copy an application.
Interdependency
None
Solution
All
Access
Record portlet > Record Detail tab > Clone menu item
Record portlet > Record Detail tab > Copy menu item

8113-Standard Comments
Version
4

| Function IDs Reference | 396

Description
Enables the Standard Comments link for the Comment field (in different places). When users click the link,
the standard comments configured by administrators display for selection.
Interdependency
None
Solution
All
Access
Record portlet > Comments tab > (Besides the Comment field) Standard Comments link
Record portlet > Application History tab > (Besides the Comment field) Standard Comments link
Record portlet > Workflow tab > Task Details > (Besides the Comments field) Standard Comments link
Contacts portlet > Conditions tab > (Besides the Comment field) Standard Comments link
Licensed Professionals portlet > Conditions tab > (Besides the Short Comments field) Standard Comments
link
Licensed Professionals portlet > Comments tab > (Besides the Comment field) Standard Comments link

8114-ADS New Non-Electronic Documents (old)
Obsolete.

8115-ADS Document List (old)
Obsolete.

8116-V360 Reports
Information about this item is unavailable at this time.

8119-GIS Service
Version
5
Description
•

Enables the GIS button in related portlets (such as the Record and Addresses portlets) and tabs (such
as the Assets tab in Records portlet). Users can click the GIS button to open the GIS map viewer and to
view the selected objects in the map.

•

Enables the GIS tab in the Records portlet for users to view the GIS objects associated with the record,
and perform functions available in the tab (including Show/Select GIS Objects, Create GIS Objects, and
Delete)

Interdependency

| Function IDs Reference | 397

Interoperation

0197-Admin-PM Schedule Linked Asset

Interoperation

0198-Admin-PM Schedule Skipped Asset

Interoperation

8203-Daily Record Asset

Solution
All
Access
Record portlet > GIS button
Work Orders portlet > Assets tab > GIS button
And more.

8120-ADS Non-Electronic Documents (old)
Obsolete.

8121-Set Payment
Version
4
Description
Enables the Payment tab in the records detail tabs of the Set portlet, so users can process payments for a
set
Interdependency
Parent

8075-Set Detail Maintenance

Solution
All
Access
Set portlet > Records tab > (After selecting a set) Payment tab

8122-Batch Job
Version
3.7
Description
Any of the following FIDs can enable the Batch Engine administration portlet:
•

0106-Admin Batch job (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

•

0284-Batch Job Maintenance (the list portlet and the Job Detail tab) and 0285-Batch Job Schedule (the
Job Schedule tab and the Log tab)

•

8122-Batch Job (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

| Function IDs Reference | 398

•

8049-Batch Job (old) (the list portlet, the Job Detail tab, Job Schedule tab, and Log tab)

Interdependency
Interoperation

0106-Admin Batch job

Interoperation

0284-Batch Job Maintenance

Interoperation

8049-Batch Job (old)

Solution
All
Access
Setup portlet > System Tools > Batch Engine
Batch Jobs portlet

8130-Parcel Genealogy
Obsolete.

8132-Workflow
Version
4.1
Description
Set to full access to enable the user to assign or reassign tasks, and edit task details, even if another staff
member or department assigned the tasks. Set to read only and set FID 8140 Workflow Limit Access by
Dept to full access to enable the user to assign or reassign tasks to staff in the user’s department but not
tasks assigned to other departments. Set to no access to disable workflow functions.
•

Enables the Workflow tab in the Record portlet for users to add and manage tasks, including adhoc
tasks, for records, and also add and manage task attachments.

•

Enables the Workflow History tab in the Record portlet for users to view the workflow task history.

•

Enables the Document Review Tasks tab in the My Task portlet for users to take document review
tasks.

•

Together with FID 8427, enables the Claim and Release buttons in the Workflow Tasks tab of the My
Tasks portlet. This button enables a user to assign (by clicking the Claim button) a workflow task to
himself/herself, or release the claim (by clicking the Release button).

•

Enables the View hyperlink on the Record Attachment List page.

Interdependency
Child of #1

8090-Workflow Supervisor

Child of #1

8186-Workflow Task Activation

Child of #1

8470-Time Accounting on Workflow

Child of #1

8207-Workflow Ad Hoc Tasks - 5.2

Interoperation of #1

8140-Workflow Limit Access by Dept

| Function IDs Reference | 399

Interoperation o f#4

8427-Claim or Release Task Assignment

Solution
All
Access
Record portlet > Workflow tab
My Tasks portlet > Document Review Tasks tab

8133-Workflow Task Assignments
Version
4.1
Description
•

Enables the Assign Task portlet for administrators to assign tasks.

•

Enables the Assign button in the Workflow tab of the Record portlet for users to assign a task, or an ad
hoc task.

•

Enables the Assign button in the Workflow Tasks tab of the My Tasks portlet for users to assign a task.

•

Enables the user to assign documents to reviewers and invoke the commands in the Action menu for
each attachment on the Attachment Details page.

•

Enables the Statistics menu button in the Inspections portlet, for users to view the inspection statistics.

Set to full access to enable the user group to view and reassign the workflow tasks assigned to them. Set
to read only to enable the user group to only view assigned workflow tasks. Set to no access to prevent the
user group from viewing or editing assigned workflow tasks.
Interdependency
Parent of #2

8132-Workflow

Solution
All
Access
Setup portlet > Workflow & Activity > Assign Task
Record portlet > Workflow tab > (After selecting a task or an ad hoc task) Assign button
My Tasks portlet > Workflow Tasks tab > (After selecting a task) Assign button
Inspections portlet > Menu > Statistics

8134-Set Workflow Status Change
Version
4.1
Description
Enables the Workflow Status tab in the Records detail tabs of the Set portlet, for users to view or change
the workflow statuses of the set members.

| Function IDs Reference | 400

Interdependency
Parent

8075-Set Detail Maintenance

Solution
All
Access
Set portlet > Records tab > Status change

8135-Include Insp. History in Workflow History
Information about this item is unavailable at this time.

8137-Calendar Structure
Version
3.9
Description
Enables the Event function for users to add calendar events for an application.
Interdependency
None
Solution
All
Access
Classic Daily > Property > Event

8138-Condition Limit Access by Dept
Version
4
Description
Enables the Condition Type Security administration function for administrators to set the access right (full
or read) of an agency or group to condition types.
Interdependency
None
Solution
All modules except SuperAgency
Access
Classic Admin Tools > Agency Profile > Security Policy > Condition Type Security link

| Function IDs Reference | 401

8140-Limit Assignments by Dept
Version
Updated in 7.2.0
Description
Enables the Workflow Security portlet for administrators to control access to different workflow processes
based on user group privileges. Set to full access and set FID 8132 Workflow to read only to enable
the user to assign or reassign tasks to staff in the user’s department but not tasks assigned to other
departments. For EDR, set to full access to limit assignment of document attachments only to staff within
assigner’s own department.
Interdependency
Interoperation

8132-Workflow

Solution
All
Access
Setup portlet > Workflow & Activity > Workflow Security

8141-Application Status
Version
4
Description
Enables the Status tab in the Record portlet, for users to manage the status for a record.
Interdependency
None
Solution
All
Access
Record portlet > Status tab

8142-Application Status History
Version
4
Description
Enables the Status History tab in the Record portlet for users to view the information about all the statuses
that exist with a record.
Interdependency
Parent

8141-Application Status

FID 8142 only works when you disable FID 8141.
Solution

| Function IDs Reference | 402

All
Access
Record portlet > (After selecting a record) Status History

8143-Inspection Scheduling
Version
4.2
Description
Enables the Inspection list portlet, and the Inspection tab in the record detail portlet. Set to full access to
enable users to schedule or reschedule inspections. Set to None to display a different method of managing
inspections in the Inspections portlet and Inspections tab.
Interdependency
Child

8249-Turn Off the Inspection Tab in CAP List

Child

8281-Inspector Districting

Child

8400-Manage Inspection

Child

8144-Inspection Results Supervisor

Child

8147-Inspection Assignments

Child

8241-Inspection New Inspection

Child

8146-Inspection Route Sheet

Child

8300-Inspections by Unit Number

Solution
All
Access
Inspection portlet
Record (Building Permit) portlet > Inspection tab

8144-Inspection Results Supervisor
Version
4.2
Description
•

Determines whether users have supervisory inspection scheduling privileges. When you set this FID to
full access, users can schedule and modify inspections at any time.

For example, if you set this FID to full access and your agency follows an inspection flow process, then
users can schedule any inspection, regardless of its place within the inspection flow process. If you set
this FID to no access and your agency follows an inspection flow process, then users cannot schedule
inspections outside of their inspection flow order.
•

Enables users to edit inspection results. For example, suppose an inspector passed a water pipe
inspection and shortly thereafter, an inspector discovered a leak or discovered another problem. This
feature allows a supervisor to modify the result from the initial “Passed” result to “Failed.”

| Function IDs Reference | 403

Note:
Inspection administrators must be aware of the effects of changing an inspection flow process after a
specific inspection flow task has started.

•

Enables the Delete button in the Inspections portlet, and the Inspections tab of the record portlet, for
users to remove an inspection.

•

Enables the Edit Flow button in the Inspections tab of the record portlet, for users to edit the daily side
inspection flow by changing milestone value.

Interdependency
y
Parent

8143-Inspection Scheduling

Parent

8145-Inspection Results

Solution
All
Access
Inspections portlet > Manage Inspection menu > Schedule Inspections (Schedule Related Inspections,
Reschedule Inspections) menu item
Inspections portlet > Delete button
Records portlet > Inspections tab > Delete button
Records portlet > Inspections tab > Edit Flow button

8145-Inspection Results
Version
4.2
Description
•

Enables the Result Inspection function in the Inspections portlet for users to enter inspection results.

•

Enables the Inspection Detail tab in the Inspections portlet for users to view, edit and update inspection
details.

Interdependency
Child of #1

8144-Inspection Results Supervisors

Child of #1

8462-Time Accounting on inspections

Child of #1

8085-Inspection Email Notification

Interoperation with #1

8400-Manage Inspection

To enable users to access the Result Inspections function from the Manage Inspection drop-down
menu, you must set FID 8400 to full access.
Solution
All
Access
Inspections portlet > Menu > Result item
Inspections portlet > Manage Inspection menu > Result Inspections item

| Function IDs Reference | 404

Inspections portlet > Inspection Detail tab

8146-Inspection Route Sheet
Version
4.2
Description
Enables the Route Sheet button in the Inspections portlet for inspectors to create inspection route sheets
and efficiently plan inspections with GIS. This feature helps inspectors minimize the time and distance they
travel to complete inspections.
Interdependency
Parent

8143-Inspection Scheduling

Child

8187-Inspection GIS Route Optimization

Child

8496-Optimize Inspection Route

Solution
All
Access
Inspections portlet > Route Sheet

8147-Inspection Assignments
Version
4.2
Description
Enables the Assign and Statistics menu items in the Inspections portlet for users to assign an inspection to
staff, and view the inspection statistics.
Interdependency
Parent

8143-Inspection Scheduling

Solution
All
Access
Inspections portlet > Menu > Assign item
Inspections portlet > Menu > Statistics item

8148-Create From GIS
Version
5
Description
Enables the Create From GIS function in Civic Platform Classic for users to automatically create
applications or inspections by GIS area or parcel.

| Function IDs Reference | 405

Interdependency
None
Solution
All
Access
Classic Daily > Application > Create From GIS

8149-Inspection Guide Sheet
Version
4.2
Description
Enables the Guide Sheet tab for inspections, so users can enter the inspection results by completing the
guidesheet items.
Interdependency
None
Solution
All
Access
Inspections portlet > Guide Sheet tab
Calendar portlet > (After selecting an inspection) Guide Sheet tab
Record portlet > (After selecting an inspection) Guide Sheet tab

8150-Find App (Custom)
Version
5
Description
Enables the Advanced Search link in the Find Application function in Civic Platform Classic. When
users click the Advanced Search link, the Find Application - Search page displays the search fields as
customized in the Find Application Profile administration function.
Interdependency
Interdependency

8068-Find App (simple search)

Interdependency

8035-Find App

.
Solution
All
Access
Classic Daily > Application > Find App > Advanced Search link (with FID 8068 enabled)
Classic Daily > Application > Find App (Find Application - Search page) (with FID 8068 disabled)

| Function IDs Reference | 406

8151-Messages
Information about this item is unavailable at this time.

8152-WO/SR Group Update
Version
4
Description
•

Enables the Assign menu item for records (such as service requests, work orders), so that users can
assign such records to specific departments and to specific users.

•

Enables the Group Update menu item in the Work Orders portlet, for users to group update work
orders.

Interdependency
Interoperation of #1

8034-New Application

Solution
All
Access
Record portlet > Menu > Assign menu item
Record portlet > Record tab > Assign menu item
Work Orders portlet > Group Update menu item

8153-ADS Document Upload (old)
Obsolete.

8154-Application Hierarchy
Version
4.1
Description
Controls application hierarchy feature in Civic Platform Classic. The application hierarchy works must
be like the Project Hierarchy functionality existed in the Civic Platform system. You can associate an
application with multiple parent applications and child applications.
Interdependency
None
Solution
All Modules except superagency
Access

| Function IDs Reference | 407

Classic Daily > Application > Hierarchy

8155-Department Manager
Obsolete.

8157-Application Custom Header
Information about this item is unavailable at this time.

8161-Properties Section Township Range
Version
5
Description
Enables the Section Township Range in Civic Platform Classic for users to configure.
Interdependency
None
Solution
Land
Access
Classic Daily > Property > Properties Section Township Range

8162-Application Limit Access by App Type
Obsolete.

8163-Real Estate Work Request
Information about this item is unavailable at this time.

8164-Real Estate Certification Package
Information about this item is unavailable at this time.

| Function IDs Reference | 408

8165-Real Estate Relocation Displace
Information about this item is unavailable at this time.

8166-Real Estate Tract-Component Relationship
Information about this item is unavailable at this time.

8167-ADS Document Delete (old)
Obsolete.

8168-Agency Dynamic Menu
Information about this item is unavailable at this time.

8169-Real Estate Service Request
Information about this item is unavailable at this time.

8170-Real Estate Vendor Work Order
Information about this item is unavailable at this time.

8171-Real Estate Tract-NFI Relationship
Information about this item is unavailable at this time.

8172-Real Estate Department Financials
Information about this item is unavailable at this time.

| Function IDs Reference | 409

8173-Real Estate Project Financials
Information about this item is unavailable at this time.

8174-Real Estate Component Financials
Information about this item is unavailable at this time.

8175-GIS Objects
Version
5.1
Description
•

Enables the Address Locator button in the Address tab, and the Address Detail tab under the Address
tab of the record portlet, for users to locate an address in the GIS map for a record.

•

Enables the GIS button in the District tab under the Address tab of the record portlet, for users to locate
an address in the GIS map.

Interdependency
Parent

8028-Addresses

Interoperation

8401-GIS Address Locator

Solution
All
Access
Record portlet > Address tab > Address Locator button
Record portlet > Address tab > Address Detail tab > Address Locator button
Record portlet > Address tab > District tab > GIS button

8176-GIS Area Usage
Version
5
Description
Enables the Cancel From GIS function in Civic Platform Classic for users to cancel inspections by
specifying GIS area.
Interdependency
None
Solution
All

| Function IDs Reference | 410

Access
Classic Daily > Inspection > Cancel From GIS

8177-Report Management
Version
5
Description
Enables the Report menu item in the Address tab of the Record portlet, so users can view the reports for
the selected addresses.
Interdependency
None
Solution
All
Access
Record portlet > Address tab > Menu > Report menu item

8178-Report Runner
Information about this item is unavailable at this time.

8179-Report Scheduler
Information about this item is unavailable at this time.

8180-Report Writer
Information about this item is unavailable at this time.

8181-Report Object Writer
Information about this item is unavailable at this time.

8182-GIS Proximity Alerts
Version
5.1
Description

| Function IDs Reference | 411

Enables the Proximity Alerts function under Workflow, so users can configure the GIS proximity alerts for
workflow tasks.
Interdependency
None
Solution
All
Access
Classic Daily > Workflow > Proximity Alerts

8183-Application App Spec Info Groups
Obsolete.

8184-Set App Spec Info
Version
6
Description
Enables the App Spec Info Change in Civic Platform Classic for users to make relevant changes.
Interdependency
None
Solution
All
Access
Classic Daily > Set > App Spec Info Change

8185-Set Task Spec Info
Version
6
Description
Enables the Task Spec Info Change in Civic Platform Classic for users to make relevant changes.
Interdependency
None
Solution
All
Access
Classic Daily > Set > Task Spec Info Change

| Function IDs Reference | 412

8186-Workflow Task Activation
Version
4.1
Description
Enables the Task Activation button in the Workflow tab of the Record portlet, so users can activate or
deactivate tasks, or change optional tasks to required tasks.
Interdependency
Parent

8132-Workflow

Solution
All
Access
Record portlet > Workflow tab > Task Activation button

8187-Inspection GIS Route Optimization
Version
5.1
Description
Enables the Show Route Map button in an inspection guidesheet for inspectors to review the inspection
route or reroute the inspection list using GIS functions.
Interdependency
Child

8146-Inspection Route Sheet

Solution
All
Access
Inspections portlet > Route Sheet button (and opens the Route Sheet portlet) > Show Route Map button

8188-SmartChart Display
Version
5.1
Description
•

Enables the SmartCharts portlet (not SmartCharts 2.0) for users to view SmartCharts.

•

Enables the Edit button in the SmartCharts portlet (not SmartCharts 2.0) for users to organize the
SmartCharts to display and hide.

Interdependency
Child

8195-SmartChart Viewer

| Function IDs Reference | 413

Solution
All
Access
SmartCharts portlet

8189-Asset Data Management
Version
5.1
Description
•

Enables the Assets portlet for users to perform asset management tasks. Enables users to access and
manage assets across all solutions and modules in Civic Platform, Citizen Access, GIS, and Mobile
Office. Main tasks include:
•

List, search, create, or delete assets

•

Look up assets and add them to work order

•

Look up assets and add them to PM schedules

•

Look up assets and associate them with addresses, parts, and records

•

Specify asset ratings, add conditions, documents, condition assessments

•

Link assets

•

Enables the Look Up button in the Assets tab of the Records portlet for users to look up assets and add
them to records and work orders.

•

If the Assets section displays in the application intake form, enables the Search and Get Address
buttons in the section for users to look up assets and associate them to the current record.

Interdependency
Child of #1

8402-Asset Associated Part

Child of #1

8282-Asset Condition

Child of #1

8262-Daily-Asset PM Schedule List

Child of #1

8399-Asset Rating

Child of #1

8294-Asset Document Look up

Child of #1

8308-Asset Condition Assessment Management

Child of #1

8201-Daily Asset Location

Child of #1

8277-Asset Usage Tracking

Child of #1

8290-Calculate Asset Depreciation

Child of #1

8346-Parent Asset Dependency Flag

Child of #1

8331-Create WO From Asset List

Child of #1

8312-Asset Clone

Child of #1

0332-Daily Cost Rate Definition

Interoperation with #1

0197-Admin-PM Schedule Linked Asset

Interoperation with #1

8412-Asset Group Update

| Function IDs Reference | 414

Interoperation with #1

0198-Admin-PM Schedule Skipped Asset

Interoperation with #1

8203-Daily Record Asset

Solution
Accela Asset Management
Access
Assets portlet
Record portlet > New > (In the application intake form) Assets section

8190-Work Order Management
Obsolete.

8191-Work Order Costing
Version
5.1
Description
Enables the Assignments and Costs tab in the Work Orders portlet for users to add and manage
assignments and costs for work orders.
Interdependency
Child

8466-Daily Work Order Costing Group Definition

Solution
Accela Asset Management
Access
Work Orders portlet > Assignments and Costs tab

8192-Work Order Parts
Version
5.1
Description
Enables the Part tab in the Work Orders portlet for users to link parts to work orders and perform Issue and
Void operations.
Interdependency
Child

8273-Parts Inventory

Child

8402-Asset Associated Part

Solution
Accela Asset Management
Access
Work Orders portlet > Part tab

| Function IDs Reference | 415

8193-Work Order Tools
Obsolete.

8194-Work Order Scheduled Work Orders
Obsolete.

8195-SmartChart Viewer
Version
5.1
Description
Enables the link at the SmartChart thumbnails for users to view the full-sized SmartCharts and edit a
SmartChart detail.
Interdependency
Child

8188-SmartChart Display

Solution
All
Access
SmartCharts portlet > (After clicking a link at SmartChart thumbnails) Edit button
Record portlet > Menu button > SmartCharts button > (After clicking a link at SmartChart thumbnails) Edit
button

8196-SmartChart GIS
Obsolete.

8197-Real Estate FDA Exceptions
Information about this item is unavailable at this time.

8198-Tract Financials Summary
Information about this item is unavailable at this time.

| Function IDs Reference | 416

8201-Daily Asset Location
Version
6.1.1
Description
Enables the Address tab in the Assets portlet for users to add and manage asset addresses.
Interdependency
Parent

8189-Asset Data Management

Solution
Accela Asset Management
Access
Assets portlet > Address tab

8202-Daily Asset Relationship
Obsolete.

8203-Daily Record Asset
Version
6.1.1
Description
Enables the Assets tab in the Records portlet for users to view and manage assets.
Parent FID 8189 enables the Look Up button in the Assets tab.
Interdependency
Interoperation

8119-GIS Service

Interoperation

8189-Asset Data Management

Child

8412-Asset Group Update

Solution
Accela Asset Management
Access
Records portlet > Assets tab

8206-Daily-Work Order Close
Version
6.1
Description

| Function IDs Reference | 417

Enables the Close menu button in the Work Orders portlet for users to close a work order.
Interdependency
None
Solution
Accela Asset Management
Access
Work Orders portlet > Menu button > Close button

8207-Workflow Ad Hoc Tasks - 5.2
Version
5.2
Description
•

Enables the New button in the Workflow tab of the record portlet, so users can create and save an ad
hoc task for the record workflow.

•

Enables the Submit button in the ad hoc task edit form, for users to edit an existing ad hoc task and
save the change.

Interdependency
Parent

8132-Workflow

Solution
All
Access
Record portlet > Workflow tab > New button
Record portlet > Workflow tab > (Click the link at an ad hoc task) > Submit button

8208-Autopopulate APO Data from GIS
Version
5.1
Description
If you enable this FID, when users attach a GIS object to a record in the application intake form, the
address, parcel, and owner (APO) objects that are associated with the GIS object automatically populates
to the record.
Interdependency
This FID only works if you set NEW_SPEAR_FORM_ENABLE to Yes,
ENABLE_AUTO_POPULATE_PARCEL_OWNER to Yes, and MULTIPLE_APO_GIS_SELECTION to NO.
Solution
All
Access
Record portlet > New > (In the application intake form) Address, Parcel, or Owner section

| Function IDs Reference | 418

8209-Single Portlet Data Summary
Version
5.2
Description
•

Enables the Application Detail tab in the Record portlet so users can view and can edit application
details.

•

Enables the Look Up button in the Work Orders tab of the Assets portlet, for users to look up and
associate work orders with assets.

Interdependency
None
Solution
All
Access
Record portlet > Detail tab
Record portlet > Summary tab > (After clicking the Application Detail link) Detail tab
Assets portlet > Work Order tab > Look Up button

8210-Workflow My Task List
Obsolete.

8211-List Driven SmartChart
Version
5.2
Description
•

Enables the SmartCharts button in the Record portlet. Users can click the button to view the
SmartChart thumbnail, and further more to edit the SmartChart.

•

Enables the Chart button when users view the details of a rating type by clicking it in the Ratings tab of
the Assets portlet.

Interdependency
Child

8195-SmartChart Viewer

Parent of #2

8399-Asset Rating

Solution
All
Access
Record portlet > Menu button > SmartCharts button

| Function IDs Reference | 419

Assets portlet > Ratings tab > (After selecting a rating type) Chart button

8212-Upload EDMS Attachment
Version
6.1.1
Description
•

Enables the New button in the Documents tab for users to upload an attachment to the document
server for a record, inspection, or parcel.

•

Enables the Copy and Move button in the Document tab of the Parcels portlet, so users can move
associated documents between genealogically related reference parcels.

•

Enables the Look Up button in the Documents tab for users to add documents to a record by looking up
from the record associated contacts and licensed professionals.

Interdependency
Parent of #1

8214-View EDMS Attachment List

Solution
All
Access
Record (Inspections, Parcels, or Calendar) portlet > Documents tab > New button
Parcels portlet > Documents tab > Copy, Move buttons
Record portlet > Documents tab > Documents tab > Look Up button
Record portlet > Application Intake Form > Document section > Look Up button

8213-Download EDMS Attachment
Version
Updated in 7.2.0
Description
Enables the Download button in the Documents tab in the Record, Inspection, Asset Condition
Assessment, Calendars and Parcels portlet, so users can click the link to download a document.

Interdependency
Parent

8214-View EDMS Attachment List

| Function IDs Reference | 420

Solution
All
Access
Record (Inspection, Calendars, Asset Condition Assessment or Parcels) portlet > Documents tab >
Download button

8214-View EDMS Attachment List
Version
6.1.1
Description
Enables the Documents tab for users to view and manage attachments for records, inspections, or parcels.

Interdependency
Child

8213-Download EDMS Attachment

Child

8212-Upload EDMS Attachment

Child

8240-Delete EDMS Attachment

Child

8433-Document Permission Settings

Child

8473-EDMS Document URL Link

Solution
All
Access
Record (Inspection, Calendars, Asset Condition Assessment or Parcels) portlet > Documents tab

8215-GIS Genealogy
Version
5.2
Description
Enables the GIS genealogy in Civic Platform Classic.
Interdependency
None
Solution
All
Access
Classic Daily > Property > GIS

| Function IDs Reference | 421

8216-Citizen Fee Update
Information about this item is unavailable at this time.

8217-Fees Credit Card Payment
Information about this item is unavailable at this time.

8218-Citizen User Profile Join Organization
Information about this item is unavailable at this time.

8219-Citizen User Profile
Version
6
Description
Enables the License tab in the PublicUser portlet for administrators to add, remove, and manage the
licenses of a public user.
Interdependency
Parent

8224-Citizen Admin Supervisor

Interoperation

8223-Citizen Admin

Either FID 8223 or FID 8219 alone can enable the License tab.
Solution
All
Access
Setup portlet > System Tools > PublicUser portlet > License tab

8220-Citizen User Profile Agency Spec Info
Information about this item is unavailable at this time.

8221-Citizen User Profile Organization
Version
6
Description

| Function IDs Reference | 422

•

Enables the Citizen User Organization portlet for users to view and manage citizen users.

•

Enables the Organization portlet for users to view, add and manage organizations.

•

•

Organization owner can set a new owner (as primary)

•

Users can manage the organization contacts in the Contact List tab of the Organization portlet.

•

Users can delete, view, and edit organization addresses in the Organization Address tab of the
Organization portlet.

Enables the Look Up button in the Associated Public User tab of the Addresses portlet, so users can
loop up and associate public users to an address.

Interdependency
Interdependency

8222-Citizen User Profile Organization Supervisor

Solution
All
Access
Citizen User Organization portlet
Organization portlet
Addresses portlet > Associated Public User tab > Look Up

8222-Citizen User Profile Organization Supervisor
Version
6
Description
Enables the Citizen User Organization portlet for users to create and manage citizen users.
Interdependency
Interdependency

8221-Citizen User Profile Organization

Solution
All
Access
Citizen User Organization portlet

8223-Citizen Admin
Version
6
Description
Enables the License tab in the PublicUser portlet for administrators to add, remove, and manage the
licenses of a public user. Set this FID to read only to prevent changes to public users’ information from
Civic Platform.
Interdependency

| Function IDs Reference | 423

Interoperation

8219-Citizen User Profile

Parent

8224-Citizen Admin Supervisor

Either FID 8223 or FID 8219 alone can enable the License tab.
Solution
All
Access
Setup portlet > System Tools > PublicUser portlet > License tab

8224-Citizen Admin Supervisor
Version
6
Description
Enables the PublicUser portlet for administrators to manage public users, including:
•

View or create new public users

•

Enable or disable public user accounts in agencies

•

Associate public users with APO or contacts

Set this FID to read only to prevent changes to public users’ information from Civic Platform.
Interdependency
Child

8223-Citizen Admin

Child

8219-Citizen User Profile

Solution
All
Access
Setup portlet > System Tools > PublicUser portlet

8227-PermitsPlus Search Address
Version
6.0.1
Description
•

Enables the Search P+ button in the Address tab of the Record tab, so users can look up a ‘PERMIT’
Plus address to a record.

•

Enables the Look up Tidemark address button in the Address tab of the Record tab, so users can look
up a Tidemark address to a record.

•

Enables the Look up Kiva address button in the Address tab of the Record tab, so users can look up a
Kiva address to a record.

| Function IDs Reference | 424

•

Enables the Search P+, Look up Tidemark address, and Look up Kiva address buttons in the address,
parcel and owner (APO) sections of the application intake form for users to associate the APOs from
these sources to the new record.

Interdependency
Parent

8028-Addresses

Solution
All
Access
Record portlet > Address tab > Search P+, Look up Tidemark address, and Look up Kiva address buttons
Record portlet > New > (In the application intake form) Search P+, Look up Tidemark address, and Look
up Kiva address buttons

8228-Reports Link
Version
6.1
Description
Enables the ARW Reports function in Civic Platform Classic for users to view ARW reports.
Interdependency
None
Solution
All
Access
Classic Daily > Reports > ARW Reports

8229-Hearings (obsolete, replaced by 8483)
Version
6.1
Description
•

Enables the Hearing tab in the record detail portlet for users to view, schedule or cancel hearings for an
application.

•

Enables the Hearing section in the Summary tab of the record detail portlet.

Interdependency
None.
Solution
All
Access
Record portlet > Hearing tab
Record portlet > Summary tab > Hearing section

| Function IDs Reference | 425

8230-Search Applicant
Obsolete.

8231-Set Current User
Obsolete.

8232-Get Parcel And Owner
Version
6.0.3
Description
Enables the Get Parcel & Owner button in the Address section of the application intake form. When
users enter an address and click the button, any parcel or owner associated to the address automatically
populates in the parcel section and owner section.
Interdependency
None
Solution
All
Access
Record portlet > New button > Parcel section > Get Parcel & Owner button

8233-Search Parcel
Obsolete.

8234-Get Address And Owner
Version
6.0.3
Description
Enables the Get Address & Owner button in the Parcel section of the application intake form. When users
enter a parcel number and they click this button, any address or owner associated to the parcel number
automatically populates in the address and owner sections.
Interdependency
None
Solution
All
Access

| Function IDs Reference | 426

Record portlet > New button > Parcel section > Get Address & Owner button

8235-Search Owner
Obsolete.

8236-Related CAPs-Search
Version
6.1
Description
Enables the Look Up button in the Related Records tab of the Record portlet for users to look up records
and add some as related records to the current record.
Interdependency
None
Solution
All
Access
Record portlet > Related Records tab > Look Up button

8238-Payment History
Version
6.1
Description
Enables the Payment History tab in the record portlet for users to view the historical payments for a record.
Interdependency
None
Solution
All
Access
Record portlet > Payment History tab

8240-Delete EDMS Attachment
Version
6.1.1
Description
Enables the Delete button in the Documents tab for users to delete attachments from records, inspections,
or parcels.
Interdependency

| Function IDs Reference | 427

Parent

8214-View EDMS Attachment List

Solution
All
Access
Record (Inspection, Calendars, Asset Condition Assessment or Parcels) portlet > Documents tab > Delete
button

8241-Inspection New Inspection
Version
6.1
Description
If you set FID 8400 to read only or no access, enables the New button in the Inspection portlet and the
Inspection tab of the record details portlet, for users to create new inspections, or associate inspections to
an application. If you set FID 8400 to full access, FID 8241 has no effect.
Interdependency
Parent

8143-Inspection Scheduling

Interoperation

8400-Manage Inspection

Solution
All
Access
Inspection portlet > New button
Record (Building Permit) portlet > Inspection tab > New button

8242-Workflow Calculate Percent Complete
Information about this item is unavailable at this time.

8243-Daily Flow Diagram
Version
6.1.1
Description
Enables the My Navigation portlet for users to follow agency procedures with the visual aid of tasks
configured by the agency administrator.
Interdependency
None
Solution
All
Access
My Navigation portlet

| Function IDs Reference | 428

8244-Daily-Print Single CAP Detail
Obsolete.

8249-Turn Off the Inspection Tab in CAP List
Version
6.1.2
Description
Disables the Inspection tab in the record detail portlet, even if you set FID 8143 to full access.
Interdependency
Interoperation

8143-Inspection Scheduling

Only when you set FID 8149 to no access or read only, and you set FID 8143 to full access, does the
Inspection tab in the record detail portlet display.
Solution
All
Access
Record (Building Permit) portlet > Inspection Tab

8250-Search My Tasks
Obsolete.

8251-Cashier Session
Version
6.2.1
Description
Enables the Cashier Session portlet for users to take payments and record payment transactions in cashier
sessions.

Interdependency
Child

Solution

8259-Cashier Session supervisor

| Function IDs Reference | 429

All
Access
Cashier Session portlet

8253-Showing GIS X/Y Locator
Version
6.1.1
Description
Enables the X/Y GIS Locator button for record addresses in the Address tab of the Record tab, or the
Address section in the application intake form, so users can select an address and view its X/Y locator in
GIS.
Interdependency
None
Solution
All
Access
Record portlet > Address tab > X/Y GIS Locator button
Record portlet > (When creating a new application) X/Y GIS Locator button in the Address section

8255-Update Inspection Required/Optional Property
Version
6.1.2
Description
Enables users to edit the Required/Optional field for each inspection type in the Inspection Schedule Inspections List in Civic Platform Classic.
Interdependency
None
Solution
All
Access
Classic Daily > Inspection > Scheduling > Required/Optional field for each inspection type in the Inspection
Schedule - Inspections List

8259-Cashier Session Supervisor
Version
4
Description
Enables the Search button in the Cashier Session portlet for users to search sessions and close sessions
opened by others. Optionally controls the Deposit Slip # and Deposit Date fields.
Interdependency

| Function IDs Reference | 430

Parent

8251-Cashier Session

Solution
All
Access
Cashier Session portlet > Search button

8260-Change Due
Obsolete.

8261-Open Cash Drawer
Version
4
Description
Enables the Open Cash Drawer button in the Cashier Session portlet, so users can open the cash drawer
after a payment.
Interdependency
None
Solution
All
Access
Cashier Session portlet > Open Cash Drawer button

8262-Daily-Asset PM Schedule List
Version
6.1
Description
Enables the PM Schedules tab in the Assets portlet for users to view the PM Schedules created for the
current asset.
Interdependency
Parent

8189-Asset Data Management

Solution
Accela Asset Management
Access
Assets portlet > PM Schedules tab

| Function IDs Reference | 431

8264-Create from Model
Version
6.1
Description
Enables the Create From Model button for users to create a record based on the template of a model
record.
Interdependency
Child

8074-Set Header Maintenance

Solution
All
Access
Record portlet > Create From Model button

8265-Model Maintenance
Version
6.1
Description
Enables the Model Maintenance portlet for users to create and maintain models based on which to create
new applications.
Interdependency
None
Solution
All
Access
Model Maintenance portlet

8266-Check reference object condition
Version
6.1
Description
Enables the display of the condition status bar for a record, if you set the Display Condition Notice field to
Yes for a reference object condition (such as address, parcel, and owner) associated with the record.
Interdependency
None
Solution
All
Access
Record portlet > Condition Status Bar

| Function IDs Reference | 432

8267-Enable Payment by Trust Account
Version
6.1.2
Description
•

Provides the Trust Account drop-down list for users to select for payments in the Payment tab of the
Record portlet.

•

Provides the Trust Account option as a payment method when users pay in the Payment Processing
portlet.

Interdependency
None
Solution
All
Access
Record portlet > Payment tab > Trust Account field
Payment Processing portlet > Pay button > Trust Account option in the Payment Method field

8268-Display Option/Required of the Inspection
Version
6.1.2
Description
Displays the Required/Optional field for each inspection type in the Inspection Schedule - Inspections List
in Civic Platform Classic.
Interdependency
None
Solution
All
Access
Classic Daily > Inspection > Scheduling > Required/Optional field for each inspection type in the Inspection
Schedule - Inspections List

8269-Customize Content
Version
6.1.3
Description
Enables the Customize Content menu item in list portlets for users to customize how information displays
in the list.
Interdependency
None

| Function IDs Reference | 433

Solution
All
Access
List portlet (such as Record portlet, Professionals portlet, etc) > Menu button > Customize Content button

8270-App Spec Info Table
Version
6.2
Description
•

Enables the App Specific Info Tables tab in the Record portlet, so users can manage the ASI tables for
a record.

•

Enables the App Specific Info Tables section in the summary portlet for a record, so users can view the
ASI tables for the record.

Interdependency
Child

8397-ASI Table Delete

Solution
All
Access
Record portlet > App Specific Info Tables tab

8271-Fees Recalculate Fees
Version
6.2
Description
Enables the ReCalc button in the Fee tab of the record portlet for users to recalculate the fees for the
application after some modifications to the fees, for example, job value change.
Interdependency
Parent

8104-Assess Fees

Solution
All
Access
Record portlet > Fee tab > ReCalc button

8272-Application Condition History
Version
6.2

| Function IDs Reference | 434

Description
Displays the Condition History tab when users click a condition in the Conditions tab of the Record portlet,
for users to view the condition history.
Interdependency
None
Solution
All
Access
Record portlet > Condition tab > (After selecting a condition) Condition History tab

8273-Parts Inventory
Version
6.2
Description
•

Enables the Part Inventory portlet for users to access the part inventory list, and perform part
transactions.

•

Enables the Look Up button in the Part tab of the Work Orders portlet for users to search and select
parts for a work order.

Interdependency
Child of #1

8275-Parts Supply

Child of #1

8449-Part Transaction-Adjust

Child of #1

8274-Part Transaction-Issue

Child of #1

8447-Part Transaction-Receive

Child of #1

8450-Part Transaction-Reserve

Child of #1

8448-Part Transaction-Transfer

Child of #1

8451-Part Transaction-Void

Child of #1

8276-Parts Contact

Parent of #2

8192-Work Order Parts

Solution
Accela Asset Management
Access
Part Inventory portlet
Work Orders portlet > Part tab > Look Up button

8274-Part Transaction-Issue
Version
7.0.5
Description

| Function IDs Reference | 435

Enables the Issue as a transaction type option in the Part Transaction tab of the Part Inventory portlet, so
users can create or modify or void issue-type part transactions.
Interdependency
Parent

8273-Parts Inventory

Solution
Accela Asset Management
Access
Part Inventory portlet > Part Transaction tab > (New or modify) Issue as Transaction Type

8275-Parts Supply
Version
6.2
Description
Enables the Part Supply tab in the Part Inventory portlet for users to view the part supply list, which is the
calculation result from part transactions.
Interdependency
Parent

8273-Parts Inventory

Solution
Accela Asset Management
Access
Part Inventory portlet > Part Supply tab

8276-Parts Contact
Version
6.2
Description
Enables the Part Contact tab in the Part Inventory portlet for users to look up contacts and add them as
contacts for parts, or delete some contacts from parts.
Interdependency
Parent

8273-Parts Inventory

Solution
Accela Asset Management
Access
Part Inventory portlet > Part Contact tab

8277-Asset Usage Tracking
Version

| Function IDs Reference | 436

6.2
Description
Enables the Usages tab in the Assets portlet for users to add and manage asset usages.
Interdependency
Parent

8189-Asset Data Management

Solution
Accela Asset Management
Access
Assets portlet > Usages tab

8278-PM Schedule Log
Version
6.2
Description
Enables the PM Schedule Log tab in the PM Schedules portlet for users to search and view the historical
generations of work orders based on a PM schedule.
Interdependency
None
Solution
Accela Asset Management
Access
PM Schedules portlet > PM Schedule Log tab

8279-New Mechanism to Create Work Order
Version
6.2
Description
Enables the Create by Form button in the Work Orders portlet for users to create a single work order using
a template.
Interdependency
None
Solution
Accela Asset Management
Access
Work Orders portlet > Create by Form button

8280-Linking Work Order to PM Schedule
Version

| Function IDs Reference | 437

6.2
Description
Enables the PM Schedule tab in the Work Orders portlet for users to view and edit the PM schedule that
generated the work order.
Interdependency
None
Solution
AMS
Access
Work Orders portlet > PM Schedule tab

8281-Inspector Districting
Version
6.2
Description
•

•

Enables the District tab in the Addresses and Parcels portlets, and also the Addresses and Parcels tabs
in the Record portlet, for users to perform the following tasks:
•

Select and associate inspection districts with addresses

•

Select and associate inspection districts with parcels

•

Copy or move associated districts between genealogically related reference parcels

Enables the Assign Inspector menu item in the Inspections portlet for users to assign an inspections to
inspectors.

Interdependency
Parent of #1

8029-Parcels

Parent of #2

8143-Inspection Scheduling

Solution
All
Access
Inspections portlet > Menu > Assign Inspector item
Record portlet > Addresses tab > District tab
Record portlet > Parcels tab > District tab
Addresses portlet > District tab
Parcels portlet > District tab

8282-Asset Condition
Version
6.2
Description

| Function IDs Reference | 438

Enables the Condition tab in the Assets portlet for users to add and manage asset conditions.
Interdependency
Parent

8189-Asset Data Management

Solution
Accela Asset Management
Access
Assets portlet > Condition tab

8285-Show Cashier ID on Payment
Version
6.1.2
Description
•

Displays the Cashier ID column in the Transactions list section in the Payment tab, and in the
transaction details after users click a receipt ID in the transaction list.

•

Displays the Cashier ID column in the Payment History tab.

Interdependency
None
Solution
All
Access
Record portlet > Payment tab > Cashier ID column in the Transactions section
Record portlet > Payment History tab > Cashier ID column

8286-Fees Print Receipt Summary
Version
6.2
Description
When you enable this FID, it enables customized receipt summaries, and it transforms the receipt ID field
from static text to a hyperlink, which gives users easy access to the receipt summary.
When you set this FID to full access, receipt ID numbers become hyperlinks. When clicked, the hyperlink
opens the receipt summary for viewing and printing. If you set this FID to no access, receipt ID numbers
remain standard numeric text.
Interdependency
None
Solution
All
Access
Credit Card/Check Transactions portlet > Search Transaction > Open a historical transaction
Payment Processing portlet > History tab > Open a transaction > Print Receipt

| Function IDs Reference | 439

POS > Transaction > Receipt ID (hyperlink)
Record portlet > Payment tab > Receipt ID (hyperlink)
Set > Payment tab > Receipt ID (hyperlink)
Set > Sets > Payment tab > Receipt ID (hyperlink)
Trust Account portlet > Transactions tab > Receipt ID (hyperlink)

8287-Auto-Assign Inspection
Version
6.2
Description
Enables the Auto Assign function for users to assign inspections automatically to inspectors according to
the inspection type configuration by the agency administrator.
Interdependency
Parent

8400-Manage Inspection

Solution
All
Access
Inspections portlet > Manage Inspection button > Schedule Inspections> (In the Schedule Inspections
page) Auto Assign button
Inspections portlet > Manage Inspection button > Reschedule Inspections > (In the Reschedule
Inspections page) Auto Assign button
Record portlet > Inspection tab > Manage Inspection button > Schedule Inspections> (In the Schedule
Inspections page) Auto Assign button
Record portlet > Inspection tab > Manage Inspection button > Reschedule Inspections > (In the
Reschedule Inspections page) Auto Assign button
Calendar portlet > Inspection Type calendars > Manage Inspection button > Schedule Inspections> (In the
Schedule Inspections page) Auto Assign button
Calendar portlet > Inspection Type calendars > Manage Inspection button > Reschedule Inspections> (In
the Reschedule Inspections page) Auto Assign button

8288-Fees Point Of Sale
Version
6.2
Description
•

Enables the Point of Sale (POS) portlet for users to perform the following tasks:
•

Create POS transactions

•

Manage fee items and receive payments for a POS transaction, and generate receipts

•

View POS transaction details

| Function IDs Reference | 440

•

Allows users to add POS items into a payment list by clicking the Add POS Item button in the Payment
Processing portlet.

Interdependency
Interoperation

8393-Payment Processing

Interoperation

8417-Enable POS

Child

8289-Fees Point of Sale Refunds

Solution
All
Access
Point of Sale portlet
Payment Processing portlet > Add POS Item button

8289-Fees Point Of Sale Refunds
Version
6.2
Description
Enables the Refund button in the Payment tab of the Point of Sale portlet for users to refund a point of sale
payment.
Interdependency
Parent

8288-Fees Point of Sale

Solution
All
Access
Point of Sale portlet > Payment tab > Refund button

8290-Calculate Asset Depreciation
Version
6.2
Description
•

Enables the Group Depreciation menu button in the Assets portlet for users to select multiple assets
and calculate their depreciation values one time.

•

Enables the Recalculate Value button in the Asset Detail tab of the Assets portlet for users to
recalculate the asset value.

•

Enables the Depreciation History menu button in the Asset Detail tab of the Assets portlet for users to
view the historical asset depreciation values.

Interdependency
Parent

8189-Asset Data Management

| Function IDs Reference | 441

Solution
Accela Asset Management
Access
Assets portlet > Menu button > Group Depreciation button
Assets portlet > Asset Detail tab > Recalculate Value button
Assets portlet > Asset Detail tab > Menu button > Depreciation History button

8291-Jetspeed Console Customization
Version
6.2
Description
Enables the Console Options link in the Civic Platform console, so that users can customize the portlets
displayed in the current console, My Console.
Interdependency
None
Solution
Console Options link
Access
Daily > Jetspeed Console

8292-Create Multiple Related CAPs
Version
6.2
Description
Enables the Clone Multi in the Related Records tab of the Record portlet to create multiple child records by
cloning.
Interdependency
None
Solution
All
Access
Record portlet > Related Records tab > Clone Multi button

8293-Open New Related CAP in SPEAR
Version
6.2
Description
Enables the Clone Sgl in the Related Records tab of the Record portlet to create a single child record by
cloning.

| Function IDs Reference | 442

Interdependency
None
Solution
All
Access
Record portlet > Related Records tab > Clone Sgl button

8294-Asset Document Look up
Version
6.3.2
Description
Enables the Look Up button in the Documents tab of the Assets portlet, so users can look up documents in
an asset.
Interdependency
Parent

8189-Asset Data Management

Solution
Accela Asset Management
Access
Assets portlet > Documents tab > Look Up button

8295-Real Estate Land Acquisition Summary
Information about this item is unavailable at this time.

8296-Cash Drawer
Information about this item is unavailable at this time.

8298-LocationQuery
Information about this item is unavailable at this time.

8299-Daily-ODS Inspection Gaps
Version
6.3.0
Description

| Function IDs Reference | 443

Enables the Select Record to Copy From in the Inspections portlet, or the Inspections tab of the record
portlet, for users to copy an inspection.
Interdependency
None
Solution
Child

8035-Find App

Access
Inspections portlet > Inspection Detail tab > Select Record to Copy From button

8300-Inspections by Unit Number
Version
6.3.0
Description
Enables the Unit Nbr field for inspections (during scheduling or route sheet management), for users to
enter the number of inspection type units required to complete the inspection.
Interdependency
Parent

8143-Inspection Scheduling

Solution
All
Access
Inspections portlet > Manage Inspection button > Schedule Inspections, Reschedule Inspections button
Inspections portlet > Manage Inspection button > Schedule Inspections, Reschedule Inspections button
Calendar portlet > Manage Inspection button > Schedule Inspections, Reschedule Inspections button
Record portlet > Manage Inspection button > Schedule Inspections, Reschedule Inspections button
Inspections portlet > Route Sheet button
Calendar portlet > Route Sheet button

8301-Using Credit Card For Payment
Version
6.3.0
Interdependency
Civic Platform integrates with a third-party online payment service for payment processing.
Description
If the FID is full access, when a user makes a payment using the Credit Card payment method, Civic
Platform requests the third-party online payment service to process the payment.
Access
Payment Processing portlet > Payment tab > Select the Credit Card payment method > Pay button
Record portlet > Fee tab > Invoice & Pay > Select the Credit Card payment method > Save button
Record portlet > Pay tab > Pay > Select the Credit Card payment method > Save button

| Function IDs Reference | 444

8302-Using Check For Payment
Version
6.3.0
Interdependency
Civic Platform integrates with a third-party online payment service for payment processing.
Description
If the FID is full access, when a user makes a payment using the Check payment method, Civic Platform
requests the third-party online payment service to process the payment.
Access
Payment Processing portlet > Payment tab > Select the Credit Card payment method > Pay button
Record portlet > Fee tab > Invoice & Pay > Select the Credit Card payment method > Save button
Record portlet > Pay tab > Pay > Select the Credit Card payment method > Save button

8303-Synchronize Function in APO
Version
6.2.1
Description
Enables the Synchronize button in the Address Detail tab under the Address tab of the Record portlet, so
users can synchronize the current address information to the external APO source.
Interdependency
Parent

8028-Addresses

Solution
All
Access
Record portlet > Address tab > Address Detail tab > Synchronize button

8304-Search Credit Card/Check Transaction
Version
6.3.0
Description
Enables the Credit Card/Check Transactions Search portlet for users to search online payment history
information.
Interdependency
None
Solution
All
Access
Credit Card/Check Transactions portlet

| Function IDs Reference | 445

8305-Reports Portlet
Version
6.3.0
Description
Controls the Reports portlet for users to access the list of reports that are applicable to the user group they
belong to.
Interdependency
None
Solution
All
Access
Reports portlet

8307-Reports Menu
Information about this item is unavailable at this time.

8308-Asset Condition Assessment Management
Version
6.3.0
Description
•

Enables the Condition Assessment tab in the Assets portlet for users to view the condition assessments
associated with assets.

•

Enables the Asset Condition Assessment portlet for users to schedule, manage maintenance, and
manage quality reviews for asset groups.

•

Enables the Asset Condition Assessment feature for users to access and manage asset condition
assessments from Mobile Office.

Interdependency
Parent of #1

8189-Asset Data Management

Child

8309-Asset Condition Assessment Observation

Child

8310-Asset Condition Assessment Linked Work Order

Solution
Accela Asset Management
Access
Assets portlet > Condition Assessment tab
Asset Condition Assessment portlet
Mobile Office > Assessments tab

| Function IDs Reference | 446

Mobile Office > Assets tab > New Assessment button
Mobile Office > Assets tab > Asset detail page > Actions fly-out menu > New Assessment button
Mobile Office > Assets tab > Assessments tab

8309-Asset Condition Assessment Observation
Version
6.3.0
Description
Enables the Observation tab in the Asset Condition Assessment portlet for users to create, edit, and view
asset condition assessment observations.
Interdependency
Parent

8308-Asset Condition Assessment Management

Solution
Accela Asset Management
Access
Asset Condition Assessment portlet > Observation tab

8310-Asset Condition Assessment Linked Work Order
Version
6.3.0
Description
Enables the Work Order tab in the Asset Condition Assessment portlet for users to create or associate a
work order to an asset condition assessment.
Interdependency
Parent

8308-Asset Condition Assessment Management

Solution
Accela Asset Management
Access
Asset Condition Assessment portlet > Work Order tab

8312-Asset Clone
Version
6.3.0
Description
Enables the Clone button in the Asset Detail tab of the Assets portlet for users to clone an asset.
Interdependency
Parent

8189-Asset Data Management

| Function IDs Reference | 447

Solution
Accela Asset Management
Access
Assets portlet > Asset Detail tab > Clone button

8313-Fee Item Note
Version
6.2.1
Description
Enables the Notes field for fee items in the Fee Calculator under Assess Fee function, so users can add
notes for fee items.
Interdependency
None
Solution
All
Access
Classic Daily > Fee > Assess Fee > Notes field in Fee Calculator

8314-Adjusted column
Version
6.2.1
Description
Enables the Adjusted field for fee items in the Fee Calculator under Assess Fee function, so users can add
adjustment value for fee items.
Interdependency
None
Solution
All
Access
Classic Daily > Fee > Assess Fee > Adjusted field in Fee Calculator

8315-Copy Inspection and Guide Sheet
Version
6.3.1
Description
Enables the Copy menu item in the Guide Sheet tab for users to copy a guidesheet from an inspection and
apply it to another one.
Interdependency
Interoperation

8343-Copy Guide Sheet

| Function IDs Reference | 448

Solution
All
Access
Inspections portlet > Guide Sheet tab > Copy button in the drop-down list of Menu
Record portlet > Inspection tab > Guide Sheet tab > Copy button in the drop-down list of Menu

8317-Workflow Calendar
Version
6.3.2
Description
Displays the Workflow Calendar drop-down list for users to select and assign a workflow calendar to an ad
hoc task or a workflow task.
Interdependency
None
Solution
All
Access
Record portlet > Workflow tab > New button > Workflow Calendar field
Record portlet > Workflow tab > (After selecting a task) Assign button > Workflow Calendar field
My Tasks portlet > Workflow Tasks tab > (After selecting a task) Assign button > Workflow Calendar field

8318-Adhoc and Workflow Together
Version
6.3.2
Description
•

Enables the Adhoc Tasks Present button in the Workflow management page in Civic Platform Classic,
so users can directly go to the Adhoc Task details from there.

•

Enables the Workflow Present button in the Adhoc management page in Civic Platform Classic, so
users can directly go to the Workflow details from there.

Interdependency
None
Solution
All
Access
Classic Daily > Workflow > Workflow > (After selecting a task) Adhoc Tasks Present button
Classic Daily > Workflow > Adhoc Task > (After selecting a task) Workflow Present button

| Function IDs Reference | 449

8322-Attach GIS Object
Version
6.4.0
Description
Enables the GIS button in the Address, Parcel, Owner, and Associated GIS Features sections in the
application intake form, so users can attach GIS objects to the application by searching in the GIS map
viewer.
Interdependency
None
Solution
All
Access
Record portlet > New > (In the application intake form) GIS button in the Address, Parcel, Owner, and
Associated GIS Features sections
Record portlet > (After selecting a partial application) Validate button in the Address, Parcel, Owner, and
Associated GIS Features sections

8323-Update Related Caps
Version
6.3.2
Description
Enables the Update Related Records in the Related Records tab of the Record portlet to update multiple
related applications at one time.
Interdependency
None
Solution
All
Access
Record portlet > Related Records tab > Update Related Records button

8324-Create CAP-Validate
Version
6.3.2
Description
Enables the Validate button in the application intake form to assist users in validating the entry for the new
application.
Interdependency
None
Solution

| Function IDs Reference | 450

All
Access
Record portlet > New > (In the application intake form) Validate button
Record portlet > (After selecting a partial application) Validate button

8325-Save Work in Progress of CAP
Version
6.3.2
Description
Enables the Save without Submit button, in the application intake form, for users to save an application
without submitting it to the system. Civic Platform assigns an application number to the application saves
the record as a partial application. You cannot arrange a workflow or schedule an inspection for the partial
application.
Interdependency
None
Solution
All
Access
Record portlet > New > (In the application intake form) Save without Submit button
Record portlet > (After selecting a partial application) Save without Submit button

8326-Fee Estimate
Version
6.4.0
Description
Enables the Estimate Fee button in the application intake form for users to assign a fee schedule to the
application and then estimate the fees.
Interdependency
None
Solution
All
Access
Record portlet > New > (In the application intake form) Estimate Fee button
Record portlet > (After selecting a partial application) Estimate Fee button

8327-Search Select Parcel Function
Version
6.4.0
Description

| Function IDs Reference | 451

Enables the Search and Select button in the Parcel tab of the record portlet, so users can perform a parcel
search, and if there is only one search result, directly add the result to the parcel list of the record.
Interdependency
Parent

8029-Parcels

Solution
All
Access
Record portlet > Parcel tab > Search and Select button

8329-App Spec Info Supervisor
Version
6.4.1
Description
Enables users as ASI supervisors, to edit ASI and ASI table fields configured as Supervisor Edit Only.
Interdependency
None
Solution
Parent

8073-App Spec Info

Parent

8270-App Spec Info Table

Access
Record portlet > App Specific Info tab > “Supervisor Edit Only” Fields
Record portlet > App Specific Info Table tab > “Supervisor Edit Only” Fields

8330-People Info Table
Version
6.4.1
Description
When users create a new licensed professional, displays the people info table fields for entry if users select
a license type that associates with some people info table.
Interdependency
Parent

0008-Reference Licensed Professionals

Solution
All
Access
Licensed Professionals portlet > New > (Selecting a license type that associates with a people info table)
Fields from the people info table in the Professional-New page
Record portlet > Professionals tab > New > (Selecting a license type that associates with a people info
table) Fields from the people info table in the Professional-New page

| Function IDs Reference | 452

8331-Create WO From Asset List
Version
6.4.1
Description
Enables the New button in the Assets portlet for users to create new work orders to associate with the
selected assets.
Interdependency
Parent

8189-Asset Data Management

Solution
Accela Asset Management
Access
Assets portlet > New button > Creates new record.

8332-Evidence
Version
6.4.2
Description
Enables the Evidence tab in the Record portlet for users to track the details, chain of custody and
disposition of evidence for cases (records).
Interdependency
Child

8334-Evidence Supervisor

Solution
All
Access
Record portlet > Evidence tab

8333-Void Invoiced But Unpaid Fee
Version
6.5
Description
Enables the Void button in the Fee List tab of the Record portlet, so users can void an invoiced but unpaid
fee.
Interdependency
Interdependency

8348-Void Paid Fee

Interdependency

8366-Void Payment

| Function IDs Reference | 453

Always enable FID 8333 with FID 8348 if you want to void an application fee. Enable FID 8333 with FID
8366 if you want to void fees associated with Point of Sale transactions.
Solution
All
Access
Record portlet > Fee List tab > Void

8334-Evidence Supervisor
Version
6.4.2
Description
Enables supervisor permission for the current user, so users can track the chain of custody for evidence.
For a user with normal permission the Chain of Custody field is read only.
Interdependency
Parent

8332-Evidence

Solution
All
Access
Record portlet > Evidence tab > Chain of Custody field

8335-Application Status Security
Information about this item is unavailable at this time.

8336-Recalculate Production Units
Version
6.4.1
Description
Enables the Recalculate button in the Work Orders portlet for users to recalculate production unit function
of work orders after the agency changes some of the default or estimated standard values for a work order
type.
Interdependency
None
Solution
Accela Asset Management
Access
Work Orders portlet > Menu button > Recalculate button

| Function IDs Reference | 454

8337-Production History
Version
6.4.1
Description
Enables the Production History tab in the Work Order portlet for users to track the production history of
work orders.
Interdependency
None
Solution
Accela Asset Management
Access
Work Order portlet > Production History tab

8338-WO Task tab on Work Order
Version
6.5.0
Description
Enables the Work Order Task tab in the Work Orders portlet for users to manage tasks for work orders.
Interdependency
Child

8339-Maintenance WO Task on Work Order

Solution
All
Access
Work Orders portlet > Work Order Task tab

8339-Maintenance WO Task on Work Order
Version
6.5.0
Description
Enables the New, Look Up, and Delete buttons in the Work Order Task tab in the Work Orders portlet for
users to create and manage tasks for work orders.
Interdependency
Parent

8338-WO Task tab on Work Order

Solution
All
Access
Work Orders portlet > Work Order Task tab > New, Look Up, and Delete buttons

| Function IDs Reference | 455

8340-Application Comments Edit
Version
Updated in 7.2.0
Description
•

Enables users to edit an existing comment in the Comments tab of the Record portlet.

•

Enables users to edit an existing comment in the Record Comments field in inspection details.

Interdependency
Parent

8110-Application Comment

Solution
All
Access
Record portlet > Comments tab > (After clicking the link of a comment) Comment edit box
Record portlet > Inspection tab > Inspection Details > Edit link besides the Record Comments field
Inspections portlet > Manage Inspection button > Schedule/Reschedule Inspections > Edit link besides the
Record Comments field
Inspections portlet > Inspection Detail tab > Edit link besides the Record Comments field

8341-Auto Pay
Version
6.5.0
Description
Enables the Invoice & Pay button in the Fee tab of the Record portlet for users to automatically pay for fee
items with the associated trust account.
Interdependency
Parent

Child-Auto Create Trust Account

Solution
All
Access
Record portlet > Fee tab > Invoice & Pay

8342-Auto Create Trust Account
Version
6.5.0
Description
Enables users to create a trust account to pay for the fee items, when no associated trust account exists
and users click the Invoice & Pay button in the Fee tab of the Record portlet.

| Function IDs Reference | 456

Interdependency
Parent

8341-Auto Pay

Solution
All
Access
Record portlet > > Fee tab > Invoice & Pay button

8343-Copy Guide Sheet
Version
6.5
Description
Enables the Copy menu item in the Guide Sheet tab for users to copy a guidesheet from an inspection and
apply it to another one.
Interdependency
Interoperation

8315-Copy Inspection and Guide Sheet

Solution
All
Access
Inspections portlet > Guide Sheet tab > Copy button in the drop-down list of Menu
Record portlet > Inspection tab > Guide Sheet tab > Copy button in the drop-down list of Menu

8344-Carrying Over Failed Guide Sheet Items
Version
6.5
Description
When users reschedule a failed inspection, displays a dialog for users to select whether to carry over failed
guidesheet items from the failed inspection to the rescheduled one.
Interdependency
Parent

8400-Manage Inspection

Solution
All
Access
Inspections portlet > Manage Inspection button > Reschedule Inspections
Record portlet > Inspection tab > Manage Inspection button > Reschedule Inspections
Calendar portlet > Inspection Type calendars > Manage Inspection button > Reschedule Inspections

| Function IDs Reference | 457

8345-User Inspection Calendar
Version
6.5
Description
Enables the Inspection Calendar views in the Calendar portlet for users to manage inspection schedules in
the inspection calendars.
Interdependency
None
Solution
All
Access
Calendar portlet > Calendar by Type tree node > Inspection Type tree node
Calendar portlet > Calendar by Inspection Type tree node

8346-Parent Asset Dependency Flag
Version
6.5
Description
Displays the Dependent Parent check box as an asset field. If users mark the check box, the parent asset
is dependent on the current asset. When the current asset status changes, Civic Platform updates the
parent asset status.
Interdependency
Parent

8189-Asset Data Management

Solution
All
Access
Assets portlet > Asset Detail tab > Dependent Parent check box (as an asset field)

8347- User Event Calendar
Version
6.5
Description
Enables the Event Calendar views in the Calendar portlet for users to manage event schedules in the
event calendars.
Interdependency
None
Solution
All

| Function IDs Reference | 458

Access
Calendar portlet > Calendar by Type tree node > Event tree node

8348-Void Paid Fee
Version
6.5
Description
Enables the Void button in the Fee List tab of the Record portlet, so users can void an invoiced and paid
fee.
Interdependency
Interdependency

8333-Void Invoiced But Unpaid Fee

Always enable FID 8333 with FID 8348 if you want to void an application fee.
Solution
All
Access
Record portlet > Fee tab > Void button

8349-Parcel Set Detail
Version
6.5
Description
Enables the Parcels tab in the Set portlet for users to create and manage parcel sets.
Interdependency
Child

8351-Parcel Set Create CAPs

Child

8352-Parcel Set Create Conditions

Child

8353-Parcel Set Create Owners

Child

8355-Parcel Set Execute Script

Solution
All
Access
Set portlet > Parcels tab

8350-Edit Parcel Set Members
Version
6.5
Description

| Function IDs Reference | 459

Enables the Set Member tab in the Parcels detail tabs of the Set portlet, so users can add set members for
a parcel set.
Interdependency
Parent

8349-Parcel Set Detail

Solution
All
Access
Set portlet > Parcels tab > (After selecting a set) Set Member tab

8351-Parcel Set Create CAPs
Version
6.5
Description
Enables the Create Records tab in the Parcels detail tabs of the Set portlet, so users can create records
and record sets from a parcel set.
Interdependency
Parent

8349-Parcel Set Detail

Solution
All
Access
Set portlet > Parcels tab > (After selecting a set) Create Records tab

8352-Parcel Set Create Conditions
Version
6.5
Description
Enables the Conditions tab in the Parcels detail tabs of the Set portlet, so users can apply conditions to a
parcel set.
Interdependency
Parent

8349-Parcel Set Detail

Solution
All
Access
Set portlet > Parcels tab > (After selecting a set) Conditions tab

8353-Parcel Set Create Owners
Version

| Function IDs Reference | 460

6.5
Description
Enables the Owner tab in the Parcels detail tabs of the Set portlet, so users can add owners for a parcel
set.
Interdependency
Parent

8349-Parcel Set Detail

Solution
All
Access
Set portlet > Parcels tab > (After selecting a set) Owner tab

8355-Parcel Set Execute Script
Version
6.5
Description
Enables the Execute Script button in the Parcels detail tabs of the Set portlet, so users can run a preconfigured EMSE script on the set members of a set.
Interdependency
Parent

8349-Parcel Set Detail

Solution
All
Access
Set portlet > Parcels tab > Execute Script

8356-Set Cloning
Version
6.5
Description
Enables the Clone button in the Records tab of the Set portlet for users to select a set and clone.
Interdependency
None
Solution
All
Access
Set portlet > Records tab > Clone button

| Function IDs Reference | 461

8357-Set Conditions
Version
6.5
Description
Enables the Condition tab in the records detail tabs of the Set portlet, so users can add conditions to a set.
Civic Platform applies the conditions to the set members simultaneously.
Interdependency
Parent

8075-Set Detail Maintenance

Solution
All
Access
Set portlet > Records tab > (After selecting a set) Condition tab

8358-Set Comments
Version
6.5
Description
Enables the Comment tab in the records detail tabs of the Set portlet, so users can add comments for a
set.
Interdependency
Parent

8075-Set Detail Maintenance

Solution
All
Access
Set portlet > Records tab > (After selecting a set) Comment tab

8359-Set Scripts
Version
6.5
Description
Enables the Execute Script button in the records detail tabs of the Set portlet, so users can run a preconfigured EMSE script on the set members of a set.
Interdependency
Parent

Solution
All

8075-Set Detail Maintenance

| Function IDs Reference | 462

Access

8361-Set Licensed Professionals
Version
6.5
Description
Enables the Professionals tab in the records detail tabs of the Set portlet, so users can add and manage
professionals for a set
Interdependency
Parent

8075-Set Detail Maintenance

Solution
All
Access
Set portlet > Records tab > (After selecting a set) Professionals tab

8362-Set Owners
Version
6.5
Description
Enables the Owner tab in the records detail tabs of the Set portlet, so users can add and manage owners
for a set.
Interdependency
Parent

8075-Set Detail Maintenance

Solution
All
Access
Set portlet > Records tab > (After selecting a set) Owner tab
Set portlet > Records tab > Set detail tab > Execute Script button

8363-Set Contacts
Version
6.5
Description
Enables the Contact tab in the records detail tabs of the Set portlet, so users can add and manage
contacts for a set.
Interdependency
Parent

8075-Set Detail Maintenance

| Function IDs Reference | 463

Solution
All
Access
Set portlet > Records tab > (After selecting a set) Condition tab

8364-Set Status Change
Version
6.5
Description
Enables the Status tab in the records detail tabs of the Set portlet, so users can set a status for a set
Interdependency
Parent

8075-Set Detail Maintenance

Solution
All
Access
Set portlet > Records tab > (After selecting a set) Status tab

8365- Inheritable editable
Version
6.5
Description
Enables the display of the Inheritable field as a standard Condition field, so users can set Yes or No for
child records to inherit conditions from their parent.
Interdependency
None
Solution
All
Access
Record (Building, Application) portlet > Conditions tab > Inheritable field

8366-Void Payment
Version
6.5
Description
Enables the Void button in the Fee List tab of the Record portlet, so users can void a point of sale fee.
Interdependency
Interdependency

8333-Void Invoiced But Unpaid Fee

| Function IDs Reference | 464

Enable FID 8333 with FID 8366 if you want to void fees associated with point of sale transactions.
Solution
All
Access
Record portlet > Fee List tab > Void

8367-Manage Batch Invoice
Version
6.5
Description
Enables the Invoices portlet for users to group multiple invoices in a batch and process them together as
one unit.
Interdependency
None
Solution
All
Access
Invoices Portlet

8369-User Time Accounting Daily
Version
6.6.0
Description
•

Enables the Time Accounting portlet for users to view and edit time accounting records

•

Assigns normal-user permission to the current user group in the Time Accounting portlet, so a user in
the user group can view and edit the time accounting records created by himself/herself.

Interdependency
Child

8375-Time Accounting Administrator\

Child

8376-Time Accounting Supervisor

Solution
All
Access
Time Accounting portlet

8370-Set of Sets Detail
Version
6.7.0

| Function IDs Reference | 465

Description
Enables the Sets tab in the Set portlet for users to combine similar sets (for example, record sets) into a
set of sets to facilitate convenient ways for batch analysis and processing.
Interdependency
Child

8373-Fee Analysis

Child

8372-Set Analysis

Child

8371-Set of Sets Members

Child

8374-Set of Sets Payment

Solution
All
Access
Set portlet > Sets tab

8371-Set of Sets Members
Version
6.7.0
Description
Enables the Set Member tab in the Sets detail tabs of the Set portlet for users to view and manage sets in
a set of sets.
Interdependency
Parent

8370-Set of Sets Detail

Solution
All
Access
Set portlet > Sets tab > (After selecting a set) Set Member tab

8372-Set Analysis
Version
6.7.0
Description
Enables the Set Analysis tab in the Sets detail tabs of the Set portlet. This tab allows users to view the fee
status (including the total invoice balance and fees paid) related to all the record set members in a set of
sets.
Interdependency
Parent

8370-Set of Sets Detail

Solution
All
Access
Set portlet > Sets tab > (After selecting a set) Set Analysis tab

| Function IDs Reference | 466

8373-Fee Analysis
Version
6.7.0
Description
Enables the Fee Analysis tab in the Sets detail tabs of the Set portlet. This tab allows users to view the
fees (including the total record fees, payments, and balances due) related to all the record set members in
a set of sets.
Interdependency
Parent

8370-Set of Sets Detail

Solution
All
Access
Set portlet > Sets tab > (After selecting a set) Fee Analysis tab

8374-Set of Sets Payment
Version
6.7.0
Description
Enables the Payment tab in the Sets detail tabs of the Set portlet for users to process payments for a set of
sets.
Interdependency
Parent

8370-Set of Sets Detail

Child

8404-Void Payment

Solution
All
Access
Set portlet > Sets tab > (After selecting a set) Payment tab

8375-Time Accounting Administrator
Version
6.6.0
Description
•

Assigns administrative permission to the current user group in the Time Accounting portlet, so the users
in the user group can view and edit any time accounting records for which any other user has access.

•

Enables the Lock flag in the time accounting details for the users to lock or unlock a time accounting
record.

| Function IDs Reference | 467

Interdependency
Parent

8369-User Time Accounting Daily

Solution
All
Access
Time Accounting portlet

8376-Time Accounting Supervisor
Version
6.6.0
Description
•

Assigns supervisory permission to the current user group in the Time Accounting portlet, so the user in
the user group can view and edit any time accounting records created by users within their user group.

•

Enables the Lock flag in the time accounting details for the users to lock or unlock a time accounting
record.

Interdependency
Parent

8369-User Time Accounting Daily

Solution
All
Access
Time Accounting portlet

8377-Select From Multiple Inspection Groups
Version
6.6.0
Description
Enables the Inspection Group drop-down list in the Pending Inspections portlet, so users can select and
create pending inspections from any inspection group. When you disable this FID, users can only select
and create pending inspections from the inspection group associated with the application type.
Interdependency
None
Solution
All
Access
Calendar portlet > Calendar by Type tree node > Inspection Type tree node > Inspections tab

| Function IDs Reference | 468

8378-Address Set Detail
Version
6.6.0
Description
Enables the Addresses tab in the Set portlet for users to create and manage address sets.
Interdependency
Child

8379-Address Set Members

Solution
All
Access
Set portlet > Addresses tab

8379-Address Set Members
Version
6.6.0
Description
Enables the Set Member tab in the Addresses detail tabs of the Set portlet, so users can add and manage
addresses in an address set.
Interdependency
Parent

8378-Address Set Detail

Solution
All
Access
Set portlet > Addresses tab > (After selecting a set) Set Member tab

8380-Address Set Comments
Version
6.6.0
Description
Enables the Comments tab in the Addresses detail tabs of the Set portlet, so users can add comments to
an address set.
Interdependency
Parent

Solution
All
Access

8378-Address Set Detail

| Function IDs Reference | 469

Set portlet > Addresses tab > (After selecting a set) Comments tab

8381-Address Set Condition
Version
6.6.0
Description
Enables the Conditions tab in the Addresses detail tabs of the Set portlet, so users can apply conditions to
an address set.
Interdependency
Parent

8378-Address Set Detail

Solution
All
Access
Set portlet > Addresses tab > (After selecting a set) Conditions tab

8382-Address Set Execute Script
Version
6.6.0
Description
Enables the Execute Script button in the Addresses detail tabs of the Set portlet, so users can run a preconfigured EMSE script on the set members of a set.
Interdependency
Parent

8378-Address Set Detail

Solution
All
Access
Set portlet > Addresses tab > Execute Script button

8383-Licensed Professional Set Detail
Version
6.6.0
Description
Enables the Licensed Professional tab in the Set portlet for users to create and manage licensed
professional sets.
Interdependency
Child

8385-Licensed Professional Set Comments

Child

8386-Licensed Professional Set Condition

| Function IDs Reference | 470

Child

8387-Licensed Professional Set Execute Script

Child

8384-Licensed Professional Set Members

Solution
All
Access
Set portlet > Licensed Professional tab

8384-Licensed Professional Set Members
Version
6.6.0
Description
Enables the Set Member tab in the Licensed Professional detail tabs of the Set portlet, so users can add
set members for a licensed professional set.
Interdependency
Parent

8383-Licensed Professional Set Detail

Solution
All
Access
Set portlet > Licensed Professional tab > (After selecting a set) Set Member tab

8385-Licensed Professional Set Comments
Version
6.6.0
Description
Enables the Comment tab in the Licensed Professional detail tabs of the Set portlet, so users can add
comments for a licensed professional set.
Interdependency
Parent

8383-Licensed Professional Set Detail

Solution
All
Access
Set portlet > Licensed Professional tab > (After selecting a set) Comment tab

8386-Licensed Professional Set Condition
Version
6.6.0
Description

| Function IDs Reference | 471

Enables the Condition tab in the Licensed Professional detail tabs of the Set portlet, so users can add
condition for a licensed professional set.
Interdependency
Parent

8383-Licensed Professional Set Detail

Solution
All
Access
Set portlet > Licensed Professional tab > (After selecting a set) Condition tab

8387-Licensed Professional Set Execute Script
Version
6.6.0
Description
Enables the Execute Script button in the Licensed Professional detail tabs of the Set portlet, so users can
run a pre-configured EMSE script on the set members of a set
Interdependency
Parent

8383-Licensed Professional Set Detail

Solution
All
Access
Set portlet > Licensed Professional tab > Execute Script

8388-Reference Address Comments
Version
6.6.0
Description
Enables the Comments tab in the Addresses portlet for users to add and manage comments for an
address.
Interdependency
Parent

0006-Reference Property Addresses

Solution
All
Access
Addresses portlet > Comments tab

8389-Reference Licensed Professional Comments
Version

| Function IDs Reference | 472

6.6.0
Description
Enables the Comments tab in the Licensed Professionals portlet for users to add and manage comments
for a licensed professional.
Interdependency
Parent

0008-Reference Licensed Professionals

Solution
All
Access
Licensed Professionals portlet > Comments tab

8390-CAP Type picker with Tree
Version
6.6.0
Description
If enabled, displays the record type picker besides the Record Type field in the Record New page, so users
can click the picker and select the record type from the tree view.
If disabled, displays the record type selection drop-down boxes, so users select the record type from the
drop-down options.
Interdependency
None
Solution
All
Access
Record portlet > New button > Record Type field in the Record New page

8391-Create Multiple CAPs for Parcels
Version
6.6.0
Description
Enables the “Create one Record for all Parcels” and “Create one Record for each Parcel” options in the
Record New page, so users can create records based on their requirement.
Interdependency
None
Solution
All
Access
Record portlet > New button > “Create one Record for all Parcels” and “Create one Record for each
Parcel” options in the Record New page

| Function IDs Reference | 473

8393-Payment Processing
Version
6.6.0
Description
•

Enables the Payment tab and the Pay button in the Payment Processing portlet for users to process
payments for records.

•

Enables the Add Renewals button in the Payment Processing portlet for users to add records for
renewal.

Interdependency
Interoperation

8288-Fees Point Of Sale

Child

8417-Enable POS

Solution
All
Access
Payment Processing portlet > Payment tab
Payment Processing portlet > Pay button
Payment Processing portlet > Add Renewals button

8394-Payment History
Version
6.6.0
Description
Enables the History tab in the Payment Processing portlet for users to view transaction history.
Interdependency
None
Solution
All
Access
Payment Processing portlet > History tab

8395-CAP Summary
Version
6.6.0
Description
Enable the Summary tab for records (applications), so users can click the Summary tab and view the
application summary together with hyper links to application detail portlets.

| Function IDs Reference | 474

Interdependency
Child

8441-Initiated Product Info

Solution
All
Access
Record portlet > Summary tab

8397-ASI Table Delete
Version
6.6.1
Description
Enables the check box for the ASI table entries in the App Specific Info Tables tab of the Record portlet, so
users can mark an ASI table entry and delete from a record.
Interdependency
Parent

8270-App Spec Info Table

Solution
All
Access
Record portlet > App Specific Info Tables tab > Check box (enabled) or each ASI table entry

8398-Cap Renewal
Version
6.6.0
Description
Enable the Renewal tab in the Record portlet for users, including public users, to renew a record.
Interdependency
None
Solution
All
Access
Record portlet > Renewal tab

8399-Asset Rating
Version
6.6
Description
•

Enables the Ratings tab in the Assets portlet for users to create and manage ratings for an asset.

| Function IDs Reference | 475

•

Enables the Ratings tab in the Asset Condition Assessment portlet for users to view and pre-calculate
condition assessment ratings.

Interdependency
Parent

8189-Asset Data Management

Child of #1

8211-List Driven SmartChart

Solution
All
Access
Assets portlet > Ratings tab
Asset Condition Assessment portlet > Ratings tab

8400-Manage Inspection
Version
6.6.0
Description
•

Enables the Manage Inspection drop-down menu in the Inspections portlet or the Calendar portlet. The
Manage Inspection menu comprises the following menu items: Schedule Inspections, Schedule Related
Inspections, Reschedule Inspections, Result Inspections, Cancel Inspections, Display Inspections in
ACA, and Hide Inspections in ACA.

•

Enables the Inspections section in the Summary tab of a record.

Interdependency
Parent of #2

8395-Cap Summary

Parent of #1

8143-Inspection Scheduling

Child of #1

8287-Auto-Assign Inspection

Child of #1

8344-Carrying over failed Guide Sheet Items

Interoperation of #1

8241-Inspection New Inspection

Interoperation of #1

8145-Inspection Results

Solution
All
Access
Inspections portlet > Manage Inspection button
Calendar portlet > Manage Inspection button
Record portlet > Manage Inspection button
Record portlet > Summary tab > Inspection section

8401-GIS Address Locator
Version
6.5.0

| Function IDs Reference | 476

Description
Enables the Address Locator button in the Address section when users create a new work order or when
users view the summary form of a work order.
Interdependency
Interoperation

8175-GIS Objects

Solution
AMS
Access
Work Orders portlet > Record tab > Summary button > Address section in the summary form > Address
Locator button
Work Orders portlet > Create New button > Address section in the application intake form > Address
Locator button

8402-Asset Associated Part
Version
Updated in 7.2.0
Description
•

Enables the Associated Parts tab in the Assets portlet for users to look up parts and associate them
with an asset. This user access control is applicable to both Civic Platform and Mobile Office users.

•

Enables the Standard Parts button in the Part tab of the Work Orders portlet, so users can add standard
parts for a work order.

Interdependency
Parent of #1

8189-Asset Data Management

Parent of #2

8192-Work Order Parts

Solution
All
Access
Assets portlet > Associated Parts tab
Work Orders portlet > Part tab > Standard Parts button

8403-Multi Agency Switch
Version
6.7.0
Description
Enables the Switch Agency drop-down field in the main console so users can toggle between multiple
Agencies. The functionality differs a little between Civic Platform Vantage360 and Civic Platform Classic.
The following descriptions summarize the differences:
•

For Civic Platform Vantage360:

| Function IDs Reference | 477

•

•

Full access: When set to Full-Access and you define the user as a Delegate User, an agency dropdown list displays in the Vantage360 console. The user can toggle between agencies by selecting
an agency from this drop-down list.

•

Read only and no access: Users do not have privileges to switch between agencies. The Agency
drop-down list does not display to users, even if you define them as a Delegate User.

For Civic Platform Classic:
•

Full access: A Delegate User views an agency drop-down list in the upper area of Civic Platform.
The user can toggle between agencies by selecting an agency from this drop-down list.

•

Read only and no access: The new multiple agency switch is not available. The user can only use
the older existing switch logic, from FID 8098 Agency Switch, if enabled.

Table 123: FID 8403 Multi-Agency Switch
FID Setting

Regular Super
Agency User

Delegate User from Super Agency

Regular Subagency User

Full Access set at both
the Parent and Subagencies

The user does not view
the new Agency Switch
drop-down list. You
must assign user to a
delegate user account
at another agency.

The new “Agency Switch” drop-down list
Not Applicable.
is available at the top of the super agency No Super Agency
page. User toggles between agencies
Access.
to which they have access. User can
perform regular user functions based on
the delegate user permissions on the User
ID at the sub-agency.

Full Access set at Super
Agency and Read Only
set at the Sub-agency

The user does not view
the new Agency Switch
drop-down list. You
must assign user to a
delegate user account
at another agency.

The new “Agency Switch” drop-down list
is available at the top of the super agency
page. User toggles between agencies
to which they have access. User can
only view information to which they have
permissions set on the delegate User ID
at the sub-agency.

Full Access set at Super
Agency and No Access
set at the Sub-agency

The user does not view
the new Agency Switch
drop-down list. You
must assign user to a
delegate user account
at another agency.

The new “Agency Switch” drop‑down list
Not Applicable.
is available at the top of the super agency No Super Agency
page. The drop-down list populates the
Access.
agencies to which they have access. User
does not have access to this sub-agency.
The option disappears from the list of
available agencies in the drop-down list.

Read Only or No-Access
set at Super Agency

Not Applicable

The new “Agency Switch” functionality is
not available.

Not Applicable.
No Super Agency
Access.

Not Applicable.
No Super Agency
Access.

Interdependency
Civic Platform can enable the ability to toggle between agencies by either FID 8403 or FID 8098. The MultiAgency switch controlled by FID 8403 offers more functionality and overrides FID 8098 Agency Switch
when you set both to Full-Access.
Solution
All
Access
Civic Platform Console > Switch Agency drop-down field

| Function IDs Reference | 478

8404-Void Payment
Version
6.7.0
Description
Enables the Void button in the Payment tab in the Sets detail tabs of the Set portlet for users to void
payments for a set of sets.
Interdependency
Parent

8374-Set of Sets Payment

Solution
All
Access
Set portlet > Sets tab > (After selecting a set) Payment tab > Void button

8405-Structure and Establishment
Version
6.7.0
Description
Enables the Structures & Establishments tab in the Record portlet for users to look up and add structures
and establishments to a record.
Interdependency
None
Solution
All
Access
Structures & Establishments portlet

8406-Edit Valuation Calculator Unit Cost
Version
6.7.0
Description
Set the Unit Cost field as editable in the Valuation Cal tab of the Record portlet for users to change the unit
cost.
Interdependency
Child

Solution
All
Access

8038-Valuation Calculation

| Function IDs Reference | 479

Record portlet > Valuation Calc tab > Unit Cost field

8408-Edit Application Status History
Version
7.0.0
Description
Enables users to edit or delete the entries in the Status History tab of the Record portlet.
FID 8408 includes the Record Status History audit log.
Interdependency
None
Solution
All
Access
Record portlet > Status History tab

8409-Workflow Delete and Assign
Version
7.0.0
Description
Enables the Delete & Assign Workflow button in the Workflow History tab of the Record portlet, so users
can delete and assign workflow.
Interdependency
None
Solution
All
Access
Record portlet > Workflow tab > Menu button > Delete & Assign Workflow button

8410-Delete CAPs
Version
7.0.0
Description
•

Enables the Delete button in the Record portlet for users to select and delete records from database.

| Function IDs Reference | 480

•

Enables the Delete button on the application intake form for partial records.

•

Enables user to view a log of deleted records. The deleted records log displays the permit ID, permit
type, any alternate IDs, record status, the person who deleted the record, and the date the record was
deleted.

Interdependency
None
Solution
All
Access

| Function IDs Reference | 481

Record portlet > Delete button
Record portlet > Select a partial record > Delete button
Record portlet > View Log > Deleted Record Log button

8411-Cap Summary
Version
7.0.0
Description
Enables the application Summary button for users to open the application form and view/edit the
application information.
Interdependency
None
Solution
All
Access
Record (Building, Application) Portlet > Detail tab > Summary button

8412-Asset Group Update
Version
7.0.0
Description
Enables the Group Update menu button in the Assets portlet, the Assets tab of the Records portlet, and the
Work Orders portlet so users can update multiple assets one time.
Interdependency
Parent

8189-Asset Data Management

Parent

8203-Daily Record Asset

Solution
Accela Asset Management
Access
Assets portlet > Menu button > Group Update button
Records portlet > Assets tab > Menu button > Group Update button

8413-MyTask - Inspections
Version
7.0.0
Description
Enables the Inspections tab in the My Tasks portlet for users to manage inspections in the My Tasks
portlet.

| Function IDs Reference | 482

Set to full access to enable the user group to view the Inspections tab in the My Tasks portlet so that users
can search for, view, and manage inspections assigned to their user group. Set to no access to prevent the
Inspections tab from displaying in the user’s My Tasks portlet.
Interdependency
None
Solution
Interdependency

8143-Inspection Scheduling

Only when you enable FID 8413 and FID 8143, can users view the Inspections tab on the My Tasks
portlet.
Access
My Tasks portlet > Inspections tab

8414-Void Payment
Version
7.0.0
Description
Enables the Void tab in the Payment Processing portlet for users to void payments for one or multiple
records.
Interdependency
None
Solution
All
Access
Payment Processing portlet > Void tab

8415-Refund Payment
Version
7.0.0
Description
Enables the Refund tab in the Payment Processing portlet for users to refund one or multiple fee payments
through the Payment Processing portlet.
Interdependency
None
Solution
All
Access
Payment Processing portlet > Refund tab

| Function IDs Reference | 483

8416-Invoices Management
Version
7.0.0
Description
Enables the Invoices tab in the Payment Processing portlet for users to invoice a payment.
Interdependency
None
Solution
All
Access
Payment Processing portlet > Invoices tab

8417-Enable POS
Version
7.0.0
Description
Enables the Add POS Item button in the Payment Processing portlet for users to add POS items into a
payment list.
Interdependency
Parent

8393-Payment Processing

Interoperation

8288-Fees Point Of Sale

Solution
All
Access
Payment Processing portlet > Add POS Item button

8418-Work Order Cost Distribution
Version
7.0.0
Description
•

Enables the Distribution Costs button in various places in the Work Orders portlet for users to distribute
the total cost for completing a work order by asset count, asset size, asset type, or by manual
allocation.

•

Enables the Distribution History tab in the Work Orders portlet for users to view the cost distribution
history of the work order.

Interdependency
None

| Function IDs Reference | 484

Solution
Accela Asset Management
Access
Work Orders portlet > Assignments and Costs tab > Distribute Costs button
Work Orders portlet > Parts tab > Distribute Costs button
Work Orders portlet > Record tab > Menu button > Distribute Costs button
Work Orders portlet > Summary tab > Menu button > Distribute Costs button
Work Orders portlet > Distribution History tab

8419-Delete Workflow History
Version
7.0.0
Description
Enables the Delete button in the Workflow History tab of the Record portlet, so users can delete workflow
history records.
Interdependency
None
Solution
All
Access
Record portlet > Workflow History tab > Delete button

8420-Daily Education Info
Version
7.0.0
Description
•

Enables the Education section in the application intake form for users to add education information
about records.

•

Enables the Education tab in the Record portlet for users to manage education for records.

Interdependency
Child

8421-Daily Delete Required Education

Solution
All
Access
Record portlet > Education tab
Record portlet > New > (In the application intake form) Education section

| Function IDs Reference | 485

8421-Daily Delete Required Education
Version
7.0.0
Description
Enables the Delete button in the Education tab in the Record portlet or the application intake form, so users
can delete some education information from records.
Interdependency
Parent

8420-Daily Education Info

Solution
All
Access
Record portlet > Education tab > Delete button
Record portlet > New > (In the application intake form) Education section > Delete button

8422-Random Audit History
Version
7.0.0
Description
Enables the Random Audit History tab in the Record portlet for users to view the random audits that
include a record or a license.
Interdependency
None
Solution
All
Access
Record portlet > Random Audit History tab

8423-Random audit set
Version
7.0.0
Description
Enables the Random Audit tab in the Set portlet for users to create and manage random audit sets.
Interdependency
None
Solution
All
Access
Set portlet > Random Audit tab

| Function IDs Reference | 486

8424-Re-generate/Delete Random Audit Set
Version
7.0.0
Description
•

Enables the Delete button in the Random Audit detail tabs of the Set portlet, so users can delete a
random audit set.

•

Together with FID 8426 (which assigns supervisor access right to the users), enables the Regenerate
Audit button in the Set Member tab of the Random Audit detail tabs of the Set portlet, after users
generate the audit set by clicking the Generate Audit button.

Interdependency
Interoperation

8426-Random Audit Supervisor

Solution
All
Access
Set portlet > Random Audit tab > Delete button
Set portlet > Random Audit tab > Set Member tab > (After you click the Generate Audit button) Regenerate
Audit button

8425-Execute Script
Version
7.0.0
Description
Enables the Execute Script button in the Random Audit detail tabs of the Set portlet, so users can run a
pre-configured EMSE script on the set members of a set.
Interdependency
None
Solution
All
Access
Set portlet > Random Audit tab > Record Audit Set/Inspection Audit Set > Set/Set Member tab

8426-Random Audit Supervisor
Version
7.0.0
Description

| Function IDs Reference | 487

Assigns supervisor access right to the users. Together with FID 8424, enables the Regenerate Audit button
in the Set Member tab of the Random Audit detail tabs of the Set portlet, after users generate the audit set
by clicking the Generate Audit button.
Interdependency
Interoperation

8424-Re-generate/Delete random audit set

Solution
All
Access
Set portlet > Random Audit tab > Set Member tab > (After you click the Generate Audit button) Regenerate
Audit button

8427-Claim or Release Task Assignment
Version
6.7.0
Description
Enables the Claim and Release buttons in the Workflow Tasks tab of the My Tasks portlet, so a user can
assign (by clicking the Claim button) a workflow task to himself/herself, or release the claim (by clicking the
Release button).

Interdependency
Interoperation

8132-Workflow

Solution
All
Access
My Tasks portlet > Workflow Tasks tab > Claim, Release buttons

8428-Daily Continuing Education Info
Version
7.0.0
Description
•

Enables the Continuing Education section in the application intake form for users to add continuing
education information about records.

| Function IDs Reference | 488

•

Enables the Continuing Education tab in the Record portlet for users to manage continuing education
for records.

Interdependency
Child

8429-Daily Delete Required Continuing Education

Solution
All
Access
Record portlet > Continuing Education tab
Record portlet > New > (In the application intake form) Continuing Education section

8429-Daily Delete Required Continuing Education
Version
7.0.0
Description
Enables the Delete button in the Continuing Education tab in the Record portlet or the application intake
form, so users can delete some continuing education information from records.
Interdependency
Parent

8428-Daily Continuing Education Info

Solution
All
Access
Record portlet > Continuing Education tab > Delete button
Record portlet > New > (In the application intake form) Continuing Education section > Delete button

8430-Daily Examination Info
Version
7.0.0
Description
•

Enables the Examination section in the application intake form for users to add examination information
about records.

•

Enables the Examination tab in the Record portlet for users to manage examination for records.

Interdependency
Child

8431-Daily Delete Required Examination

Solution
All
Access
Record portlet > Examination tab

| Function IDs Reference | 489

Record portlet > New > (In the application intake form) Examination section

8431-Daily Delete Required Examination
Version
7.0.0
Description
Enables the Delete button in the Examination tab in the Record portlet or the application intake form, so
users can delete some examinations from records.
Interdependency
Parent

8430-Daily Examination Info

Solution
All
Access
Record portlet > Examination tab > Delete button
Record portlet > New > (In the application intake form) Examination section > Delete button

8432-User Meeting Calendar
Version
7.0.0
Description
Enables the Meeting Calendar views in the Calendar portlet for users to manage meeting schedules in the
meeting calendars.
Interdependency
None
Solution
All
Access
Calendar portlet > Calendar by Type tree node > Meeting tree node

8433-Document Permission Settings
Version
7.0.0
Description
Enables the Assign button in the Documents tab in the Record portlet, so users can control which
documents are available for public users to view or upload.
Interdependency
Parent

Solution

8214-View EDMS Attachment List

| Function IDs Reference | 490

All
Access
Record portlet > Documents tab > Assign button

8434-Global Search
Version
7.0.0
Description
Enables the Global Search function for users to perform a global search.
Interdependency
None
Solution
All
Access
Global Search box

8435-Daily - Cashier - Pay More
Version
6.7.0
Description
Enables the Pay button in the Payment tab for users to process a payment from the record portlet.
Interdependency
Interoperation

8108-Cashier Payment

Child

8445-Daily - Cashier - Pay More

If you enable FID 8108, the Pay button always displays. If you set FID 8108 to read only or no access, the
Pay button only displays when you enable FID 8435.
Solution
All
Access
Record portlet > Payment tab > Pay button

8436-Daily - Cashier - Apply
Version
6.7.0
Description
Enables the Apply button in the Payment tab for users to apply payments from the record portlet.
Interdependency
Interoperation

8108-Cashier Payment

| Function IDs Reference | 491

If you enable FID 8108, the Apply button always displays. If you set FID 8108 to read only or no access,
the Apply button only displays when you enable FID 8436.
Solution
All
Access
Record portlet > Payment tab > Apply button

8437-Daily - Cashier - Refund
Version
6.7.0
Description
Enables the Refund button in the Payment tab for users to handle a full or partial refund of un-allocated
payments from the record portlet.
Interdependency
Interoperation

8108-Cashier Payment

If you enable FID 8108, the Refund button always displays. If you set FID 8108 to read only or no access,
the Refund button only displays when you enable FID 8437.
Solution
All
Access
Record portlet > Payment tab > Refund button

8438-Daily - Cashier - Void
Version
6.7.0
Description
Enables the Void button in the Payment tab for users to void payments directly from the application.
Interdependency
Interoperation

8108-Cashier Payment

If you enable FID 8108, the Void button always displays. If you set FID 8108 to read only or no access, the
Void button only displays when you enable FID 8438.
Solution
All
Access
Record portlet > Payment tab > Void button

8439-Daily - Cashier - Generate Receipt
Version

| Function IDs Reference | 492

6.7.0
Description
Enables the Generate Receipt button in the Payment tab for users to generate the receipt for a payment
from the record portlet.
Interdependency
Interoperation

8108-Cashier Payment

If you enable FID 8108, the Generate Receipt button always displays. If you set FID 8108 to read only or
no access, the Generate Receipt button only displays when you enable FID 8439.
Solution
All
Access
Record portlet > Payment tab > Generate Receipt button

8440-Daily - Cashier - Fund Transfer
Version
6.7.0
Description
Enables the Fund Transfer button in the Payment tab for users to transfer funds between trust accounts.
Interdependency
Interoperation

8108-Cashier Payment

If you enable FID 8108, the Fund Transfer button always displays. If you set FID 8108 to read only or no
access, the Fund Transfer button only displays when you enable FID 8440.
Solution
All
Access
Record portlet > Payment tab > Refund button

8441-Initiated Product Info
Version
7.0.0
Description
Enables the Initiated by Product field in the Summary tab of the Record portlet. This field shows the
product that created the record, such as Civic Platform Classic, Accela Vantage360, Citizen Access,
Accela Wireless, or other Civic Platform applications.
Interdependency
Parent

Solution
All
Access

8395-CAP Summary

| Function IDs Reference | 493

Record portlet > Summary tab > Initiated by Product field

8442-Inspection History Audit Log
Version
7.0.0
Description
Enables the View Log button in the Inspections portlet for users to view the historical audit logs on
inspections.
Interdependency
Interoperation

0307-Audit Logger Definition

Solution
All
Access
Inspections portlet > View Log button
Inspections portlet > Inspection Detail tab > View Log button

8443-Application Audit Log
Version
7.0.0
Description
Enables the Deleted Record Log under View Log button in the Record portlet, so users can view the record
deletion logs.
Interdependency
None
Solution
All
Access
Record portlet > View Log button > Deleted Record Log button option

8444-Application Status History Log
Version
7.0.0
Description
Enables the View Log button in the Application History tab of the Record portlet, so users can view the
application status history.
Interdependency
None
Solution

| Function IDs Reference | 494

All
Access
Record portlet > Application History tab > View Log button

8445-Daily - Cashier - Pay More
Version
Cashier
Description
Enables the Pay More button in the Payment tab after users click the Pay button for a payment from the
record portlet.
Interdependency
Interoperation

8108-Cashier Payment

Parent

8435-Daily - Cashier - Pay More

If you enable FID 8108, the Pay More button always displays. If you set FID 8108 to read only or no
access, the Pay More button only displays when you enable FID 8445.
Solution
All
Access
Record portlet > Payment tab > Pay button > (In the payment details page) Pay More button

8446-Disable Licensed Professionals Delete
Version
6.7.0
Description
Disables the Delete button in the Professionals tab of the Record portlet to forbid users from deleting
licensed professionals from records. If you disable this FID, the Delete button displays.
Interdependency
Parent

8032-Licensed Professionals

Solution
All
Access
Record portlet > Professionals tab > Delete button

8447-Part Transaction-Receive
Version
7.0.5
Description

| Function IDs Reference | 495

Enables the Receive as a transaction type option in the Part Transaction tab of the Part Inventory portlet,
so users can create or modify or void receive-type part transactions.
Interdependency
Parent

8273-Parts Inventory

Solution
Accela Asset Management
Access
Part Inventory portlet > Part Transaction tab > (New or modify) Receive as Transaction Type

8448-Part Transaction-Transfer
Version
7.0.5
Description
Enables the Transfer as a transaction type option in the Part Transaction tab of the Part Inventory portlet,
so users can create or modify or void transfer-type part transactions.
Interdependency
Parent

8273-Parts Inventory

Solution
Accela Asset Management
Access
Part Inventory portlet > Part Transaction tab > (New or modify) Transfer as Transaction Type

8449-Part Transaction-Adjust
Version
7.0.5
Description
Enables the Adjust as a transaction type option in the Part Transaction tab of the Part Inventory portlet, so
users can create or modify, or void adjust-type part transactions.
Interdependency
Parent

8273-Parts Inventory

Solution
Accela Asset Management
Access
Part Inventory portlet > Part Transaction tab > (New or modify) Adjust as Transaction Type

8450-Part Transaction-Reserve
Version

| Function IDs Reference | 496

7.0.5
Description
Enables the Reserve as a transaction type option in the Part Transaction tab of the Part Inventory portlet,
so users can create or modify or void reserve-type part transactions.
Interdependency
Parent

8273-Parts Inventory

Solution
Accela Asset Management
Access
Part Inventory portlet > Part Transaction tab > (New or modify) Reserve as Transaction Type

8451-Part Transaction-Void
Version
7.0.5
Description
Enables the Void button in the Part Transaction tab of the Part Inventory portlet, so users can select part
transactions to void.
Interdependency
Parent

8273-Parts Inventory

Solution
Accela Asset Management
Access
Part Inventory portlet > Part Transaction tab > Void button

8456-Fee Schedule Drop Down List
Version
6.7.0
Description
When users add fee items in the Fee tab of the Record portlet, enables the Fee Schedule drop-down list to
provide fee schedule options not associated with the current record type.
Interdependency
None
Solution
All
Access
Record portlet > Fee tab > Add button > (In the fee item-add page) Fee Schedule selection field

| Function IDs Reference | 497

8457-Create Free Form Condition
Version
7.0.5
Description
Sets the Condition Name as editable in the Conditions tab, so users can add free-form (ad hoc) conditions
in addition to standard conditions.
Interdependency
This FID works for all enable Conditions tabs.
Solution
All
Access
Record (Inspections, Addresses, Parcels, Owners, Assets, Contacts, Structure & Establishments) portlet >
Condition tab

8458-Complete Record and ASI Audit
Version
7.0.5
Description
Enables the record detail logs from the View Log button in the Record portlet, so users can view logs on
record details, ASI, ASI tables, documents, and record conditions.
Interdependency
The Record/ASI/ASIT audit log type only works after super agency administrator enables the audit log
option in the agency configuration.
Child

0333-Condition List Audit Log

Child

8468-Inspections List Guide Sheet Audit Log

Child

8471-Document Audit Log

Solution
All
Access
Record portlet > View Log button > Record Details Log button option

8459-Specific Record and ASI Audit Log
Version
7.0.5
Description
Enables the View Log button in the detail tab of the Record portlet, so users can view the record audit logs.
Interdependency

| Function IDs Reference | 498

The Record/ASI/ASIT audit log type only works after super agency administrator enables the audit log
option in the agency configuration.
Solution
All
Access
Record portlet > Record Detail tab > View Log button

8460-Delete Related Records
Version
7.1.0
Description
Enables the Delete button in the Related Records tab of the Record portlet for users to delete related
records from the current record. After enabling this FID, you cannot disassociate child records with prior
parent associations.
Interdependency
None
Solution
All
Access
Record portlet > Related Records tab > Delete button

8461-Show Work Order Cost Information
Version
7.1.0
Description
Displays the actual costs (instead of “***”) associated with the work orders in the cost-related columns in
various places, such as the Cost, Unit Rate, Total Rate, and Total Cost columns.
This FID setting is also applicable to Mobile Office. If you set this FID to full access or read only, Mobile
Office displays actual values for the cost fields. The values include Total Cost, Unit Cost, Fix Cost, and
Cost LTD. If you disable this FID and set it to no access, Mobile Office displays asterisks “***” for the cost
fields.
Interdependency
FID 8484 Cost Item Permission works only if you set FID 8461 to full access or read only.
Child

8484-Cost Item Permission

Solution
Accela Asset Management
Mobile Office
Access
Work Orders portlet > Summary tab > Costing List section
Work Orders portlet > Assignments and Costs tab
Work Orders portlet > Distribution History tab

| Function IDs Reference | 499

Work Orders portlet > Assets
Assets portlet > Asset Detail tab > Cost LTD field
Assets portlet > Linked Assets tab > Cost LTD field
Mobile Office > Records > Cost and Parts tab > Cost Summary list
Mobile Office > Records > Cost and Parts tab > Cost subtab > Cost Items list
Mobile Office > Records > Cost and Parts tab > Cost subtab > Cost Items list > Actions drop-down menu >
Open button > Cost Detail pop-up window
Mobile Office > Records > Cost and Parts tab > Cost subtab > Cost Items list > Add Cost button > Select
Cost pop-up window
Mobile Office > Records > Work Order Tasks tab > Work Order Tasks list
Mobile Office > Records > Work Order Tasks tab > Work Order Tasks list > Actions drop-down menu >
Open button > Edit Work Order Task pop-up window
Mobile Office > Assets > Summary tab

8462-Time Accounting on inspections
Version
7.1.0
Description
Enables the entry of time accounting data in the Resulting Inspections portlet, so users can select time
accounting types and specify time accounting details for an inspection.
Set on inspections to control whether users can access the time accounting entries on inspections from
Civic Platform and Mobile Office. When set to full access, and after inspectors synchronize the inspection
statuses from Mobile Office to Civic Platform, the Time Spent on Inspection section in the inspection detail
page shows the time accounting records that inspectors created in Mobile Office. When set to read only,
the Actions drop-down list does not display.
Interdependency
Parent

8145-Inspection Results

Solution
All
Access
Inspections portlet > Menu > Result item
Inspections portlet > Manage Inspection menu > Result Inspections item

8463-Payment Auto Allocation
Version
7.1.0
Description
Skips the payment allocation screen when users post a payment in the record payment tab that exactly
matches the balance due on the account. Civic Platform automatically allocates the full payment to each
fee item.
Interdependency
None

| Function IDs Reference | 500

Solution
All
Access
Record portlet > Payment tab > Pay button

8464-SSN and FEIN Mask
Version
7.1.0
Description
Masks the digits in the SSN and FEIN fields to protect the privacy for the person, such as licensed
professional or contact.
To apply the mask to the FEIN field, you must set the FID 8464 to full access. FID 8464 determines
whether the SSN mask and FEIN mask apply to the SSN and FEIN fields. When you set the FID to full
access, users can only view the masked data of the SSN and FEIN fields in the Civic Platform.
Interdependency
None
Solution
All
Access
Record portlet > Contact tab
Record portlet > Professionals form
Record portlet > Search button > Record search form
Contacts portlet > Look Up, Search, Contact Detail tab
Licensed Professionals portlet > Look Up, Search, Professional Detail tab
Addresses portlet > Contact tab
Trust Account portlet > Associated People tab

8465-Deposit Trust Account During the payment
Version
7.1.0
Description
Enables the Trust Account Deposit button in the Payment tab of the Record portlet, so users can make a
deposit into the associated trust account in the tab.
Interdependency
None
Solution
All
Access
Record portlet > Payment tab > Trust Account Deposit button

| Function IDs Reference | 501

8466-Daily Work Order Costing Group Definition
Version
7.1.0
Description
Enables the Cost Group Management button in the Assignments and Costs tab of the Work Orders portlet
for users to create and manage cost groups.
Interdependency
Parent

8191-Work Order Costing

Solution
Accela Asset Management
Access
Work Orders portlet > Assignments and Costs tab > Cost Group Management button

8467-Schedule Related Inspections
Version
7.1.0
Description
•

Enables the Schedule Related Inspections in the Manage Inspection drop-down menu in the
Inspections portlet or the Calendar portlet, so users can manually add related inspections to an
inspection.

•

Enables the Related Inspection tab in the Inspections portlet for users to view and manage related
inspections.

Interdependency
Parent

8400-Manage Inspection

Solution
All
Access
Inspections portlet > Manage Inspection button > Schedule Related Inspections button
Inspections portlet > Manage Inspection button > Related Inspections button
Calendar portlet > Manage Inspection button > Schedule Related Inspections button
Record portlet > Manage Inspection button > Schedule Related Inspections button

8468-Inspections List Guide Sheet Audit Log
Version
7.1.0
Description

| Function IDs Reference | 502

•

Controls whether the Guide Sheet Log button under the View Log menu is available on the Inspection
list portlet.

•

Controls whether the Guide Sheet option is available as an audit type if users select to view the record
details log after clicking the View Log button in the Record portlet.

Interdependency
The guidesheet audit log type only works after super agency administrator enables the audit log option in
the agency configuration.
Parent

8458-Complete Record and ASI Audit

Solution
All
Access
Record portlet > View Log button > Record Details Log button option > Guide Sheet option in Audit Type in
the Audit Log page

8469-Inspections Detail Guide Sheet Audit Log
Version
7.1.0
Description
Enables the View Log button in the Guide Sheet tab of the Inspection detail portlet for users to view audit
logs on guide sheets.
Interdependency
The guidesheet audit log type only works after super agency administrator enables the audit log option in
the agency configuration.
Interoperation

0307-Audit Logger Definition

Solution
All
Access
Inspections portlet > Guide Sheet tab > View Log button

8470-Time Accounting on Workflow
Version
7.1.0
Description
Enables the entry of time accounting data in the workflow tasks and ad hoc tasks from the Workflow tab
of the Record portlet, so users can select time accounting types and specify time accounting details for a
workflow task.
Set to control whether users can access the Workflow portlet to locate time accounting records on workflow
tasks, ad hoc tasks, workflow history, and workflow tasks. When set to full access, and an inspector
synchronizes the inspection statuses from Mobile Office to Civic Platform, the Time Spent on the Task
section in the workflow page shows the time accounting records that inspectors created in Mobile Office.

| Function IDs Reference | 503

Interdependency
Parent

8132-Workflow

Solution
All
Access
Record portlet > Workflow tab > (After selecting a task in the task tree) Task Details

8471-Document Audit Log
Version
7.1.0
Description
Enables the View Log button for the attachments to records or inspections, for users to view the audit logs
on documents.
Interdependency
The document audit log type only works after super agency administrator enables the audit log option in
the agency configuration.
Parent

8458-Complete Record and ASI Audit

Solution
All
Access
Record portlet > View Log button > Record Details Log button option > Document option in Audit Type in
the Audit Log page
Record portlet > Document tab > View Log button
Inspections portlet > Document tab > View Log button

8472-Disable ADS Document View Button
Version
7.0.5
Description
Disables the View button in the Documents tab of the Record portlet for documents with ADS source.
Interdependency
Parent

8214-View EDMS Attachment List

Solution
All
Access
Record (Inspection, Calendars, Asset Condition Assessment or Parcels) portlet > Documents tab > (For
documents with ADS source) View button

| Function IDs Reference | 504

8473-EDMS Document URL Link
Version
7.2.0
Description
Enables the download link at each document in the Documents tab, so users can click the download link to
download a document.
Interdependency
Parent

8214-View EDMS Attachment List

Solution
All
Access
Record (Inspection, Calendars, Asset Condition Assessment or Parcels) portlet > Documents tab >
Download link at a document

8474-Check-in Permission
Version
7.1.0
Description
Enables the Check-In Revisions button in the Civic Platform add-on toolbar for Adobe Acrobat X Pro, so
users can check in reviewed documents.
Interdependency
None
Solution
All
Access
Record (Inspection, Calendars, Asset Condition Assessment or Parcels) portlet > Documents tab > Review
link > Check-In Revisions button in the Civic Platform add-on toolbar for Adobe Acrobat X Pro

8475-Asset Audit Log
Version
7.2.0
Description
The FID enables users to view the asset audit logs of historical modifications to asset details, asset
attributes and asset attribute tables. The logs record the actions performed such as added, updated, or
deleted, and also record the field, relationship, the entity ID, log time, value, and operator information.
Interdependency
The asset audit log type only works after super agency administrator enables the audit log options in the
agency configuration.

| Function IDs Reference | 505

Parent

8189-Asset Data Management

Solution
Accela Asset Management
Access
Assets portlet > View Log button > (In the Audit Type field of the Audit Log pop-up window) Asset option
Assets portlet > Asset Detail > View Log

8476-Examination Audit Log
Version
7.2.0
Description
Enables the View Log button for the examinations to records, for users to view the audit logs on
examination information.
Interdependency
The examination audit log only works after super agency administrator enables the Examination audit log
option in the agency configuration.
Solution
All
Access
Record portlet > Record secondary tab > View Log button

8477-Document Review Permission
Version
7.1.0
Description
This FID controls whether users have permission to review documents or not.
Interdependency
You must enter other EDR functionality. You must install EDR.
Solution
All
Access
Record portlet > Document tab > Action Menu for a selected document > Review

8478-Document Assign Permission
Version
7.2.0
Description
This FID controls whether users have permission to assign review tasks for documents.

| Function IDs Reference | 506

Interdependency
You must enable other electronic document review (EDR) functionality. You must install EDR.
Solution
All
Access
Record portlet > Document tab > Action Menu for a selected document > Assign

8479-Deactivate Contacts in Set Contacts
Version
7.2.0
Description
Enables the Deactivate button on the Contacts tab for a record set.
Interdependency
None
Solution
All
Access
Set portlet > Records tab > Contacts tab

8480-Conditions of Approval
Version
7.2.0
Description
Enables the Conditions of Approval tab for a record, an inspection, and a record set.
Interdependency
None
Solution
All
Access
Record portlet > Select a record or open the Condition Notice window > Conditions of Approval tab
Inspection portlet > Select a record or open the Condition Notice window > Conditions of Approval tab
Set portlet > Records tab > Select a record > Conditions of Approval tab

8481-Delete Conditions of Approval
Version
7.2.0
Description
Controls whether users can delete conditions of approval.
Interdependency

| Function IDs Reference | 507

Parent

8480-Conditions of Approval

Solution
All
Access
Record portlet > Conditions of Approval tab
Inspection portlet > Conditions of Approval tab
Set portlet > Records tab > Conditions of Approval tab

8482-Create a Set in Record List
Version
7.3
Description
Enable this FID to display the Create a Set button on the Record list portlet. With this button, users can
create sets directly from the Record list portlet.
Interdependency
None
Solution
All
Access
Record list portlet > Create a Set button

8483 Meetings
Version
7.3
Description
Controls access permission for the Record > Meeting tab.
Note:
FID 8047 & 8229 controlled access to this tab in prior version releases.

Interdependency
None
Solution
All
Access
Record portlet > Meeting tab

8484-Cost Item Permission
Version

| Function IDs Reference | 508

7.2.0
Description
Controls whether user permission defined in the Recipient tab for a cost item applies to Civic Platform.
Interdependency
Parent

8461-Show Work Order Cost Information

Solution
Accela Asset Management
Access
Setup portlet > Work Orders > Cost Item > Recipient tab

8485-Daily Record Set List
Version
7.3
Description
Enable to display the Set secondary tab on the Record detail portlet. This tab displays a list of sets for
which the current record is a member.
Interdependency
None
Solution
All
Access
Record portlet > Set tab

8486-Compare Documents
Version
7.2.0
Description
Enable the Compare Documents button in the Documents tab on the Record detail portlet, and the
Document Review Tasks tab on the My Tasks portlet.
Interdependency
None
Solution
All
Access
Record portlet > Documents tab > Manage Documents > Compare Documents button
My Tasks portlet > Document Review Tasks > Compare Documents button

| Function IDs Reference | 509

8490-Record Contact Log
Version
7.3
Description
Enables the View Log button in the record contact portlet for users to view the historical audit logs on
contacts.
Interdependency
N/A
Solution
All
Access
Record portlet > Contact tab > View Log button

8491-Workflow History Log
Version
7.3
Description
Enables the View Log button in the workflow history portlet for users to view the workflow audit log.
Interdependency
N/A
Solution
All
Access
Record portlet > Workflow History tab > View Log button

8492-Communication List
Version
7.3
Description
Controls whether the 360-degree communication viewer displays for daily users.
Interdependency
None
Solution
All
Access
Communication Manager portlet

| Function IDs Reference | 510

8493-Consolidated Record Activities
Version
7.3
Description
Controls whether the Consolidated Record Activities tab displays on records.
Interdependency
None
Solution
All
Access
Record portlet > Consolidated Record Activities tab

8494-Record Communication List
Version
7.3
Description
Controls whether the Communication tab displays on records.
Interdependency
None
Solution
All
Access
Record portlet > Communication List tab

8495-Show Inspection Submitted Location
Version
7.2.6
Description
Controls the display of the GIS button on the Inspections list portlet.
When agencies set the FID to Full Access or Read Only, clicking the GIS button displays a drop-down
menu with the Show Scheduled Location and Show Scheduled and Submitted Locations options. If a user
selects the Show Scheduled Location option, the map viewer launches and then shows only the scheduled
location for every inspection that the user selected from the Inspection list portlet. If the user selects the
Show Scheduled and Submitted Locations option, the map viewer opens and shows both scheduled and
inspected locations for every selected inspection with different map markers indicating the locations.
When agencies set the FID to No Access, clicking the GIS button displays the map viewer that shows only
the scheduled location for every selected inspection.
Interdependency
None

| Function IDs Reference | 511

Solution
Civic Platform
Access
Inspections portlet

8496-Optimize Inspection Route
Version
7.2.6
Description
Controls the display of the Order By button on the Inspection Route Sheet portlet. When you set this FID to
Full Access or Read Only, the Order By button appears. When you set this FID to No Access, the Order By
button is not available.
Interdependency
Parent

8146-Inspection Route Sheet

Solution
Civic Platform
Access
Inspections portlet > Route Sheet

8497-Result Inspections by CSV
Version
7.2.6
Description
Controls the display of the Result Inspections button on the Documents tab for a licensed professional.
Agency users can click the Result Inspections button to update a batch of inspection results according to
the inspection result CSV file that a contract inspector or a self-certified inspector uploads from Citizen
Access.
Interdependency
None
Solution
Civic Platform
Access
Licensed Professionals portlet > Documents tab

8499-New Document from Scan
Version
7.3.1
Description
Controls the availability of the New from Scan button on the Documents tab.

| Function IDs Reference | 512

Interdependencies
Users must install the Accela Document Scan client on their workstations. See Chapter 15, Accela
Document Scan Installation, in the Civic Platform 7.3.1 Installation Guide for more information.
Solution
All
Access
Record portlet > Documents tab

8500-Asset Condition Assessment Costing
Version
7.3.1
Description
Enables the Assignments and Costs tab in the Assets portlet for users to add and manage assignments
and costs for asset condition assessments.
Interdependency
None
Solution
Accela Asset Management
Access
Assets portlet > Assignments and Costs tab

8501-Display Desired Date Field
Version
7.3.1.1
Description
This FID controls whether users can view or edit the Desired Date and Desired Time fields when
scheduling inspections.
Interdependency
None
Solution
Accela Land Management
Access
Inspections portlet > Manage Inspection > Schedule Inspection

8502-Pending Inspection
Version
7.3.3
Description
This FID disables the Pending Inspection button on the Schedule Inspections form.

| Function IDs Reference | 513

Interdependency
None
Solution
Accela Land Management
Access
Inspections portlet > Manage Inspections > Schedule Inspections

8503 - Attach Record Document to People
Version
7.3.3
Description
This FID enables users to attach documents in a record to a licensed professional or contact which is
associated with the record.
Interdependency
Parent

8214-View EDMS Attachment List

Access
Record portlet > Documents tab > Manage Documents > Add to People button
Record portlet > Application Intake Form > Document section > Also Attach To field

8504 - Document Checklist
Version
7.3.3
Description
This FID controls whether the Doc Review Checklists functionality is available for users to perform
document reviews following the guidelines of the checklist.
Interdependency
You must enter other EDR functionality. You must install EDR.
Solution
All
Access
Record portlet > Document tab > Action Menu for a selected document > View Doc Info > Doc Review
Checklists tab
Record portlet > Document tab > Action Menu for a selected document > View Doc Info > Doc Review
Tasks tab > Checklist sub-tab
Record portlet > Documents tab > Review link > Open Checklists button in the Civic Platform add-on
toolbar for Adobe Acrobat XI Pro

8505 - Document Review Comments
Version

| Function IDs Reference | 514

7.3.3
Description
This FID controls whether users have permission to view or delete document review comments, and
change the discipline or status of the comments in the Doc Review Comments tab.
Interdependency
You must enter other EDR functionality. You must install EDR.
Solution
All
Access
Record portlet > Document tab > Action Menu for a selected document > View Doc Info > Doc Review
Comments tab

8506 - Internal User
Version
8.0.0
Description
This FID controls whether the Look Up Staff command is available in the Manage Contacts menu on the
Contacts tab of a record. This command provides the ability to associate internal users to an application/
record as a contact.
Interdependency
You must enter other EDR functionality. You must install EDR.
Solution
All
Access
Record portlet > Contacts tab > Manage Contacts menu

9999-Log Out
Obsolete.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : Yes
Create Date                     : 2015:10:21 09:24:05-07:00
Creator                         : DITA Open Toolkit
Modify Date                     : 2015:10:21 11:15:28-07:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Civic Platform 8.0 Configurer's Guide
Language                        : en
Date                            : 2015:10:21 09:24:05-07:00
Producer                        : Apache FOP Version 1.1
PDF Version                     : 1.4
Creator Tool                    : DITA Open Toolkit
Metadata Date                   : 2015:10:21 11:15:28-07:00
Document ID                     : uuid:cba8d9bf-eac7-404c-95af-bf175c0f6041
Instance ID                     : uuid:4a5617a1-00a4-491d-9431-9ff39bc5645e
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 514

EXIF Metadata provided by EXIF.tools