Air Knife Manual
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
AIR KNIFE PACKAGE (AK-2L) (AK-3L) USER MANUAL FOR USE WITH THE AUTOBOX® ABX-2L AND ABX-3L SYSTEMS PL 664 REV B (06/2018) TABLE OF CONTENTS .MANUFACTURER’S INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 DESCRIPTION OF EQUIPMENT AND INTENDED USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 KEY FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WARNING AND SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 AIR KNIFE PACKAGE OVERVIEW.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 INSTALLATION OF AIR KNIFE ASSEMBLY.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 TROUBLESHOOTING AND TOOL SERVICE INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 DISASSEMBLY AND PART DIAGRAMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 TERMS AND CONDITIONS AND WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2 866-795-1586 • WWW.SEWERNOZZLES.COM MANUFACTURER’S INFORMATION StoneAge Inc. StoneAge Europe 466 S. Skylane Drive Unit 2, Britannia Business Centre Durango, CO 81303, USA Britannia Way Phone: 970-259-2869 Malvern WR14 1GZ Toll Free: 866-795-1586 United Kingdom www.stoneagetools.com Phone: +44 (0) 1684 892065 This manual must be used in accordance with all applicable national laws. The manual shall be regarded as a part of the machine and shall be kept for reference until the final dismantling of the machine, as defined by applicable national law(s). Updated manuals can be downloaded at: https://www.stoneagetools.com/manuals AIR KNIFE SPECIFICATIONS Model Numbers AK-2L & AK-3L 13.65 lbs Assembly Weight with Hoses Assembly Size (Air Knife ONLY) (6.19kg) 5.2” X 6” X 5.1” Tall (132mm x 152mm x 130mm Tall) 90/ 100/ 125 PSI Min. / Nominal / Max. Air Supply Pressure (0.62 / 0.69/ 0.86 MPa) Nominal Air Supply Volume (8.5 m3/h at 0.69 MPa) Optimal Operational Temperature Range ***Use a dessicant air dryer if operating below 40o F (4o C) to avoid freezing the manifold Operational Relative Humidity Range 5 CFM at 100 PSI 40o F to 140o F (4o C to 60o C) 1% RH to 100% RH DESCRIPTION OF EQUIPMENT AND INTENDED USE The Air Knife was designed to address two of the most common problems encountered when cleaning heat exchanger tubes: poor traction and tractor cleanliness. Overall traction improves significantly as residue is removed from the outside surfaces of the high pressure hoses. The life of drive components increases dramatically once contamination is excluded from inside the tractor. The Air Knife can be used for any tube cleaning application where increased traction or maintaining internal cleanliness is desired. KEY FEATURES • Removes debris on hoses, which improves hose traction and therefore allows the Autobox Tractor to be operated at lower clamp pressures. This will increase component life by reducing friction on the belts and rollers. • The Air Knife assembly can be installed quickly and easily. 866-795-1586 • WWW.SEWERNOZZLES.COM 3 WARNING AND SAFETY INSTRUCTIONS StoneAge has designed and manufactured this equipment considering all hazards associated with its operation. StoneAge assessed these risks and incorporated safety features in the design. StoneAge WILL NOT accept responsibility for the results of misuse. The risk assessment MUST consider potential material or substance hazards including: • • • • • • • • • • • • IT IS THE RESPONSIBILITY OF THE INSTALLER/ OPERATOR to conduct a job specific risk assessment prior to use. Job specific risk assessment MUST be repeated for each different set up, material, and location. The risk assessment MUST conform to the Health and Safety at Work Act 1974 and other relevant Health and Safety legislation. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS Aerosols Biological and microbiological (viral or bacterial) agents Combustible materials Dusts Explosion Fibers Flammable substances Fluids Fumes Gases Mists Oxidizing Agents PPE may include: • Eye protection: Full face visor Use of Personal Protective Equipment (PPE) is dependent on the working pressure of water and the cleaning application. Managers, Supervisors, and Operators MUST carry out a job specific risk assessment to define the exact requirements for PPE. See Protective Equipment for Personnel (Section 6) of WJTA-IMCA’s Recommended Practices For The Use Of High-pressure Water jetting Equipment for additional information. • Foot protection: Kevlar® brand or steel toe capped, waterproof, non-slip safety boots Hygiene - Operators are advised to wash thoroughly after all waterjetting operations to remove any waterblast residue which may contain traces of harmful substances. • Body protection: Multi-layer waterproof clothing approved for water jetting • Hand protection: Waterproof gloves • Ear protection: Ear protection for a minimum of 85 dBA • Head protection: Hard hat that accepts a full face visor and ear protection • Hose protection: Hose shroud • Respiratory protection: May be required; refer to job specific risk assessment First aid provision - users MUST be provided with suitable first aid facilities at the operation site. WARNING Operations with this equipment can be potentially hazardous. Caution MUST be exercised prior to and during machine and water jet tool use. Please read and follow all of these instructions, in addition to the guidelines in the WJTA Recommended Practices handbook, available online at www.wjta.org. Deviating from safety instructions and recommended practices can lead to severe injury and/or death. PRE-RUN SAFETY CHECK • Refer to WJTA-IMCA’s, Recommended Practices For The Use Of High-pressure Waterjetting Equipment and/or The Water Jetting Association’s, WJA Code of Practice for additional safety information. • • • • Complete a job specific risk assessment and act on the resulting actions. Adhere to all site specific safety procedures. Ensure the waterblasting zone is properly barricaded and that warning signs are posted. Ensure the work place is free of unnecessary objects (e.g. loose parts, hoses, tools). • • • • • 4 Ensure all Operators are using the correct Personal Protective Equipment (PPE). Check that the air hoses are properly connected and tight. Check all hoses and accessories for damage prior to use. Do not use damaged items. Only high quality hoses intended for waterblast applications should be used as high-pressure hoses. Check all high-pressure threaded connections for tightness. Ensure that Operators never connect, disconnect, or tighten hoses, adapters, or accessories with the high-pressure water pump unit running. Ensure no personnel are in the hydroblasting zone. 866-795-1586 • WWW.SEWERNOZZLES.COM AIR KNIFE PACKAGE OVERVIEW AK-XX AIR KNIFE PACKAGE CONTENTS **SHOWN HERE INSTALLED ON THE AUTOBOX® ABX-2L SYSTEM AK 120 (FOR ABX-2L) OR AK 130 (FOR ABX-3L) AIR KNIFE ASSEMBLY CB 372-25 AK HOSE BUNDLE ASSEMBLY AK 140 MANIFOLD ASSEMBLY AK 120 (FOR ABX-2L) OR AK 130 (FOR ABX-3L) AIR KNIFE ASSEMBLIES AK 140 MANIFOLD ASSEMBLY CB 372-25 AK HOSE BUNDLE ASSEMBLY 866-795-1586 • WWW.SEWERNOZZLES.COM 5 INSTALLATION OF AIR KNIFE ASSEMBLY INSTALLING THE AIR KNIFE ASSEMBLY: 1. Remove the bottom Quick Release Pins from the Air Knife assembly and Autobox® Hose Tractor. 2. Set the top Quick Release Pin on the Air Knife Assembly into the Slot on ABX Guide Assembly and insert the bottom pin through both assemblies until it locks in place. 3. Set the top Quick Release Pin on the Autobox® Hose Tractor into the Slot on Air Knife assembly and insert the bottom pin through both assemblies until it locks in place. 4. Using a small adjustable end wrench, fasten the two air supply hoses to the Air Knife Assembly. It is NOT critical if red or black is on top or bottom. AIR KNIFE ASSEMBLY 3 2 4 1 4 1 AUTOBOX HOSE TRACTOR HOSE GUIDE ASSEMBLY 5. Fasten the Chicago Air Fitting on the AK 140 Manifold Assembly to the Chicago Air Fitting on the Control Box. 6. Using a small adjustable end wrench, fasten the other ends of the two air supply hoses to the AK 140 Manifold Assembly. FILTER, LUBRICATOR ON CONTROL BOX 5 AK 140 MANIFOLD ASSEMBLY 6 6 866-795-1586 • WWW.SEWERNOZZLES.COM INSTALLATION OF AIR KNIFE ASSEMBLY 7. The manifold assembly has two quarter turn ball valves that control air supply to the upper and lower air knife components. Turn both Ball Valves to the ON position. Ball valves are in the ON position when the are parallel to the hoses. BALL VALVES SHOWN IN THE “ON” POSITION TROUBLESHOOTING AND TOOL SERVICE INFORMATION The Air Knife has no moving parts. If performance decreases SIGNIFICANTLY the Air Knife may be disassembled and cleaned to remove any contamination blocking air flow. This should not be necessary with normal use. 1. To remove both Air Knife Block assemblies, remove the four ¼” flat head screws from the side plates and pull out the blocks. SHIM 4 2. To disassemble each Air Knife Block assembly, remove the two button head screws. Be sure not lose or damage the shim that is between the two plates. 3. Clean the debris from the blocks, shims, and inside the Air Knife assembly with soap and water. Be sure all pieces are dry before assembling. 4. Assemble the two Air Knife Block assemblies and insert them into the Air Knife assembly as shown. Fasten them to the side plates with the four ¼” flat head screws. 3 2 1 1 4 AIR KNIFE BLOCK ASSEMBLIES 4 2 1 3 4 SECTION VIEW 866-795-1586 • WWW.SEWERNOZZLES.COM 7 PARTS DIAGRAM AK 120 AIR KNIFE ASSEMBLY FOR ABX-2L # 8 PART NUMBER QTY. 1 ABX 298 QUICK PIN 17-4 SS .38 X 3.0 2 2 AK 110 AIR KNIFE ASSY 2 3 AK 115 FTG, ADAPTER P6M J6M BRASS 2 4 AK 125 BLOCK, OUTLET AIR KNIFE 2L 1 5 AK 126 PLATE, OUTLET AIR KNIFE 2L 2 6 BR 169 DUST CAP, J6 2 7 GP 025-P6SS HEX SOCKET PLUG 2 8 GSF 325-03 FHCS .25-20 X .75 SS 4 9 GSF 337-04 FHCS .37-16 X 1.00 SS 4 866-795-1586 • WWW.SEWERNOZZLES.COM PARTS DIAGRAM AK 130 AIR KNIFE ASSEMBLY FOR ABX-3L # PART NUMBER QTY. 1 ABX 356 QUICK PIN 17-4 SS .38 X 3.75 2 2 AK 110 AIR KNIFE ASSY 2 3 AK 115 FTG, ADAPTER P6M J6M BRASS 2 4 AK 135 BLOCK, OUTLET AIR KNIFE 2L 1 5 AK 136 PLATE, OUTLET AIR KNIFE 2L 2 6 BR 169 DUST CAP, J6 2 7 GP 025-P6SS HEX SOCKET PLUG 2 8 GSF 325-03 FHCS .25-20 X .75 SS 4 9 GSF 337-04 FHCS .37-16 X 1.00 SS 4 866-795-1586 • WWW.SEWERNOZZLES.COM 9 PARTS DIAGRAM AK 140 MANIFOLD ASSEMBLY 10 # PART NUMBER QTY. 1 AK 141 AIR MANIFOLD, 2XP8F INLET, 3XP6F OUTLET 1 2 AK 142 BALL VALVE, MINIATURE LEVER, P6FXP6M 2 3 GP 025-P6SS HEX SOCKET PLUG 1 4 AK 115 FTG, ADAPTER P6M J6M BRASS 2 5 CB 114 INLET FITTING 2 6 BR 169 DUST CAP, J6 2 866-795-1586 • WWW.SEWERNOZZLES.COM PARTS DIAGRAM CB 372-25 AK HOSE BUNDLE ASSEMBLY # PART NUMBER MATERIAL QTY. UNITS GPSL 1000-NYL-G-BK 1.00 DIA BRAIDED EXPANDABLE HEAVY DUTY NYLON (TECHFLEX GORILLA SLEEVE NHN 1.00 BK) 1 24’ GPHS 2000-OLE-A-BK 2.00 DIA HEAVY DUTY MOISTURE SEAL HEAT-SHRINK (REF MC 7270K85) 2 5” GPHO 0375-RUB-BK 3/8” ID X 5/8” OD PUSH-ON AIR HOSE, BUNA-N/PVC, 250 PSI, BLACK (REF THERMOID FLEX-LOC BLACK) 1 25’ 4 GPHO 0375-RUB-RD 3/8” ID X 5/8” OD PUSH-ON AIR HOSE, BUNA-N/PVC, 250 PSI, RED (REF THERMOID FLEX-LOC RED) 1 25’ 5 CB 372.7-25 LABEL PROVIDED BY VENDOR 1 6 CB 067 3/8” PUSH-ON BRASS HOSE FITTING 3/8” JIC (DIXON 2880609C) 4 1 2 3 866-795-1586 • WWW.SEWERNOZZLES.COM 11 TERMS AND CONDITIONS AND WARRANTY INFORMATION 1. Acceptance of Terms and Conditions. Receipt 3. Warranty. SELLER MAKES NO WARRANTIES OR of these Terms and Conditions of Sale (“Terms and REPRESENTATIONS AS TO THE PERFORMANCE Conditions”) shall operate as the acceptance by OF ANY PRODUCT EXCEPT AS SET FORTH IN THE StoneAge, Inc. (“Seller”) of the order submitted by STONEAGE LIMITED WARRANTY PROVIDED WITH THE the purchaser (“Buyer”). Such acceptance is made PRODUCT. expressly conditional on assent by Buyer to these Terms and Conditions. Such assent shall be deemed to have 4. Delivery. Seller is not obligated to make delivery by been given unless written notice of objection to any of a specified date, but will always use its best efforts to these Terms and Conditions (including inconsistencies make delivery within the time requested. The proposed between Buyer’s purchase order and this acceptance) is shipment date is an estimate. Seller will notify Buyer given by Buyer to Seller promptly on receipt hereof. promptly of any material delay and will specify the revised delivery date as soon as practicable. UNDER Seller desires to provide Buyer with prompt and efficient NO CIRCUMSTANCES SHALL SELLER HAVE ANY service. However, to individually negotiate the terms LIABILITY WHATSOEVER FOR LOSS OF USE OR of each sales contract would substantially impair FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES Seller’s ability to provide such service. Accordingly, the RESULTING FROM DELAY REGARDLESS OF THE product(s) furnished by Seller are sold only according REASON(S). to the terms and conditions stated herein and with the terms and conditions stated in any effective StoneAge All product(s) will be shipped F.O.B. point of origin, Dealer Agreement or StoneAge Reseller Agreement, if unless specifically agreed otherwise, and Buyer shall applicable. Notwithstanding any terms and conditions pay all shipping costs and insurance costs from that on Buyer’s order, Seller’s performance of any contract point. Seller, in its sole discretion, will determine and is expressly made conditional on Buyer’s agreement arrange the means and manner of transportation of the to these Terms and Conditions unless otherwise product(s). Buyer shall bear all risk of loss commencing specifically agreed to in writing by Seller. In the absence with the shipment or distribution of the product(s) from of such agreement, commencement of performance, Seller’s warehouse. Order shortages or errors must be shipment and/or delivery shall be for Buyer’s reported within fifteen (15) business days from receipt of convenience only and shall not be deemed or construed shipment to secure adjustment. No product(s) may be to be an acceptance of Buyer’s terms and conditions. returned without securing written approval from Seller. 2. Payment/Prices. Unless other arrangements have 5. Modification. These Terms and Conditions are been made in writing between Seller and Buyer, payment intended by Seller and Buyer to constitute a final, for the product(s) shall be made upon receipt of invoice. complete and exclusive expression of agreement The prices shown on the face hereof are those currently relating to the subject matter hereof and cannot be in effect. Prices invoiced shall be per pricelist in effect supplemented or amended without Seller’s prior written at the time of shipment. Prices are subject to increase approval. for inclusion of any and all taxes which are applicable and which arise from the sale, delivery or use of the 6. Omission. Seller’s waiver of any breach or Seller’s product(s), and the collection of which Seller is or may failure to enforce any of these Terms and Conditions be responsible to provide to any governmental authority, at any time, shall not in any way affect, limit or waive unless acceptable exemption certificates are provided Seller’s right thereafter to enforce and compel strict by Buyer in accordance with applicable law. Buyer compliance with every term and condition hereof. shall pay all charges for transportation and delivery and all excise, order, occupation, use or similar taxes, 7. Severability. If any provision of these Terms and duties, levies, charges or surcharges applicable to the Conditions is held to be invalid or unenforceable, such product(s) being purchased, whether now in effect invalidity or unenforceability shall not affect the validity or hereafter imposed by any governmental authority, or enforceability of the other portions hereof. foreign or domestic. 12 866-795-1586 • WWW.SEWERNOZZLES.COM TERMS AND CONDITIONS AND WARRANTY INFORMATION 8. Disputes. Seller and Buyer shall attempt in good 10. Jurisdiction and Venue. Seller and Buyer agree faith to promptly resolve any dispute arising under that the state or federal courts located within the City these Terms and Conditions by negotiations between and County of Denver, Colorado shall have sole and representatives who have authority to settle the exclusive jurisdiction over any litigation concerning any controversy. If unsuccessful, Seller and Buyer shall dispute arising under these Terms and Conditions not further attempt in good faith to settle the dispute otherwise resolved pursuant to Section 9 as well as any by nonbinding third-party mediation, with fees and alleged defects of any Products or damages sustained expenses of such mediation apportioned equally to as a result of such alleged defects. Seller and Buyer each side. Any dispute not so resolved by negotiation further agree that should any litigation be commenced or mediation may then be submitted to a court of in connection with such a dispute, it shall only be competent jurisdiction in accordance with the terms commenced in such courts. Seller and Buyer agree to hereof. These procedures are the exclusive procedures the exclusive jurisdiction of such courts and neither will for the resolution of all such disputes between the Seller raise any objection to the jurisdiction and venue of such and Buyer. courts, including as a result of inconvenience. 9. Governing Law. All sales, agreements for sale, offers 11. Attorney’s Fees. If any litigation is commenced to sell, proposals, acknowledgments and contracts between Seller and Buyer, or their personal of sale, including, but not limited to, purchase orders representatives, concerning any provision hereof, accepted by Seller, shall be considered a contract under the party prevailing in the litigation shall be entitled, the laws of the State of Colorado and the rights and in addition to such other relief that is granted, to a duties of all persons, and the construction and effect of reasonable sum as and for their attorneys’ fees and all provisions hereof shall be governed by and construed costs in such litigation or mediation. according to the laws of such state. STONEAGE TRADEMARK LIST View the list of StoneAge’s trademarks and service marks and learn how the trademarks should be used. Use of StoneAge trademarks may be prohibited, unless expressly authorized. http://www.StoneAgetools.com/trademark-list/ STONEAGE PATENT DATA View the list of StoneAge’s current U.S. patent numbers and descriptions. http://www.sapatents.com STONEAGE TERMS AND WARRANTY View StoneAge’s Terms and Warranty Conditions online. http://www.stoneagetools.com/terms http://www.stoneagetools.com/warranty 866-795-1586 • WWW.SEWERNOZZLES.COM 13 TERMS AND CONDITIONS AND WARRANTY INFORMATION WARRANTY: Warranties set forth herein extend only to End-Users, modification of the Product or use of parts not approved meaning customers acquiring, or that have previously by StoneAge will void this Limited Warranty. StoneAge acquired, a product manufactured by StoneAge reserves the right to change or improve the material and (“Product”) for their own use and not for resale, either design of the Product at any time without notice to End- directly from StoneAge Inc. (“StoneAge”) or from a User, and StoneAge is not obligated to make the same StoneAge Authorized Dealer or Reseller (“Dealer”). No improvements during warranty service to any Product warranty of any kind or nature is made by StoneAge previously manufactured. beyond those expressly stated herein. 4. WARRANTY EXCLUSIONS. This Limited Warranty 1. LIMITED WARRANTY PERIOD. Subject to does not cover, and StoneAge shall not be responsible the limitations and conditions hereinafter set forth, for the following, or damage caused by the following: StoneAge warrants its Product to be free from defects (1) any Product that has been altered or modified in any in workmanship and material for a period of one (1) year way not approved by StoneAge in advance in writing; from the date of purchase by the End-User, provided that (2) any Product that has been operated under more the end of the limited warranty period shall not be later severe conditions or beyond the rated capacity specified than eighteen (18) months from the date of shipment of for that Product; (3) depreciation or damage caused the Product to the Dealer or the End-User by StoneAge by normal wear and tear, failure to follow operation or (“Limited Warranty Period”). All replacement parts which installation instructions, misuse, negligence or lack are furnished under this Limited Warranty and properly of proper protection during storage; (4) exposure to installed shall be warranted to the same extent as the fire, moisture, water intrusion, electrical stress, insects, original Product under this Limited Warranty if, and only explosions, extraordinary weather and/or environmental if, the original parts were found to be defective within the conditions including, but not limited to lightning, natural original Limited Warranty Period covering the original disasters, storms, windstorms, hail, earthquakes, acts Product. Replacement parts are warranted for the of God or any other force majeure event; (5) damage to remainder of the original Limited Warranty Period. This any Product caused by any attempt to repair, replace, Limited Warranty does not cover any component part of or service the Product by persons other than StoneAge any Product not manufactured by StoneAge. Any such authorized service representatives; (6) costs of normal component part is subject exclusively to the component maintenance parts and services; (7) damage sustained manufacturer’s warranty terms and conditions. during unloading, shipment or transit of the Product; 2. LIMITED WARRANTY COVERAGE. StoneAge’s sole obligation under this Limited Warranty shall be, at StoneAge’s option and upon StoneAge’s inspection, to or (8) failure to perform the recommended periodic maintenance procedures listed in the Operator’s Manual accompanying the Product. repair, replace or issue a credit for any Product which is 5. REQUIRED WARRANTY PROCEDURES. To be determined by StoneAge to be defective in material or eligible for warranty service, the End-User must: (1) workmanship. StoneAge reserves the right to examine report the Product defect to the entity where the Product the alleged defective Product to determine whether this was purchased (i.e. StoneAge or the Dealer) within Limited Warranty is applicable, and final determination the Limited Warranty Period specified in this Limited of limited warranty coverage lies solely with StoneAge. Warranty; (2) submit the original invoice to establish No statement or recommendation made by a StoneAge ownership and date of purchase; and (3) make the representative, Dealer or agent to End-User shall Product available to a StoneAge authorized service constitute a warranty by StoneAge or a waiver or representative for inspection to determine eligibility modification to any of the provisions hereof or create any for coverage under this Limited Warranty. This Limited liability for StoneAge. Warranty shall not extend to any person or entity who fails to provide proof of original purchase from StoneAge 3. WARRANTY SERVICE PROVIDERS. Service and repair of the Product is to be performed only by StoneAge authorized service representatives, including Dealers who are authorized repair centers, with or a Dealer. No Product may be returned for credit or adjustment without prior written permission from StoneAge. StoneAge approved parts. Information about StoneAge authorized service representatives can be obtained through the StoneAge website at www.stoneagetools. com/service. Unauthorized service, repair or 14 866-795-1586 • WWW.SEWERNOZZLES.COM TERMS AND CONDITIONS AND WARRANTY INFORMATION 6. DISCLAIMER OF IMPLIED WARRANTIES AND OTHER REMEDIES. EXCEPT AS EXPRESSLY STATED HEREIN (AND TO THE FULLEST EXTENT ALLOWED UNDER APPLICABLE LAW), STONEAGE HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ANY AND ALL WARRANTIES, REPRESENTATIONS OR PROMISES AS TO THE QUALITY, PERFORMANCE OR FREEDOM FROM DEFECT OF THE PRODUCT COVERED BY THIS LIMITED WARRANTY. STONEAGE FURTHER DISCLAIMS ALL IMPLIED INDEMNITIES. 7. LIMITATION OF LIABILITY. End-User specifically acknowledges that the Product may be operated at high speeds and/or pressures, and that as such it may be inherently dangerous if not used correctly. EndUser shall familiarize itself with all operation materials provided by StoneAge and shall at all times use and require its agents, employees and contractors to use ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IT IS UNDERSTOOD THAT STONEAGE’S LIABILITY, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE, OR OTHERWISE SHALL NOT EXCEED THE AMOUNT OF THE PURCHASE PRICE PAID BY THE END-USER FOR THE PRODUCT. STONEAGE’S MAXIMUM LIABILITY SHALL NOT EXCEED, AND END-USER’S REMEDY IS LIMITED TO EITHER (1) REPAIR OR REPLACEMENT OF THE DEFECTIVE WORKMANSHIP OR MATERIAL OR, AT STONEAGE’S OPTION, (2) REFUND OF THE PURCHASE PRICE, OR (3) ISSUANCE OF A CREDIT FOR THE PURCHASE PRICE, AND SUCH REMEDIES SHALL BE END-USER’S ENTIRE AND EXCLUSIVE REMEDY. YOU, THE END-USER, UNDERSTAND AND EXPRESSLY AGREE THAT THE FOREGOING LIMITATIONS ON LIABILITY ARE PART OF THE CONSIDERATION IN THE PRICE OF THE STONEAGE PRODUCT YOU PURCHASED. all necessary and appropriate safety devices, guards Some jurisdictions do not allow the limitation or and proper safe operating procedures. In no event shall exclusion of liability for certain damages, so the above StoneAge be responsible for any injuries to persons or limitations and exclusions may not apply to you. This property caused directly or indirectly by the operation Limited Warranty gives you specific legal rights, and you of the Product if End-User or any agent, employee, or may also have other rights which vary from jurisdiction contractor of End-User: (1) fails to use all necessary to jurisdiction. If any provisions of this Limited Warranty and appropriate safety devices, guards and proper is held to be invalid or unenforceable, such invalidity safe operating procedures; (2) fails to maintain in good or unenforceability shall not affect the validity or working order such safety devices and guards; (3) alters enforceability of the other portions hereof. or modifies the Product in any way not approved by StoneAge in advance in writing; (4) allows the Product to be operated under more severe conditions or beyond the rated capacity specified for the Product; or (5) otherwise negligently operates the Product. End-User shall indemnify and hold StoneAge harmless from any and all liability or obligation incurred by or against StoneAge, including costs and attorneys’ fees, to or by any person so injured. TO THE FULL EXTENT ALLOWED BY APPLICABLE LAW, STONEAGE SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES (INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF GOODWILL, DIMINUTION OF VALUE, WORK STOPPAGE, INTERRUPTION OF BUSINESS, RENTAL OF SUBSTITUTE PRODUCT, OR OTHER COMMERCIAL LOSS EVEN TO THE EXTENT SUCH DAMAGES WOULD CONSTITUTE DIRECT DAMAGES), WITH RESPECT TO THE COVERED STONEAGE PRODUCT, OR OTHERWISE IN CONNECTION WITH THIS LIMITED WARRANTY, REGARDLESS OF WHETHER STONEAGE HAS BEEN 866-795-1586 • WWW.SEWERNOZZLES.COM 15 1-866-795-1586 • www.STONEAGETOOLS.com © 2014 StoneAge, Inc. All Rights Reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c143 79.161424, 2017/09/22-11:52:47 Create Date : 2018:06:26 12:23:51-06:00 Metadata Date : 2018:06:26 12:23:56-06:00 Modify Date : 2018:06:26 12:23:56-06:00 Creator Tool : Adobe InDesign CC 13.1 (Windows) Instance ID : uuid:da7dfbbb-f618-44e5-9672-ba6ee719d37d Original Document ID : xmp.did:9d322ba9-59f6-4fd3-b672-f1a11ffe25b4 Document ID : xmp.id:d30dd1a5-467d-3e47-9e73-1201a18d47af Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:77401483-837c-ab47-b0c7-008074479a22 Derived From Document ID : xmp.did:0b7d9475-4bb7-f046-b7a8-359a70126092 Derived From Original Document ID: xmp.did:9d322ba9-59f6-4fd3-b672-f1a11ffe25b4 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.1 (Windows) History Changed : / History When : 2018:06:26 12:23:51-06:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 16 Creator : Adobe InDesign CC 13.1 (Windows)EXIF Metadata provided by EXIF.tools