Ampex Plug In Mic Preamp

User Manual: Ampex plug-in mic preamp

Open the PDF directly: View PDF .
Page Count: 5

Download
Open PDF In Browser	View PDF

Ampex plug-in Microphone Preamp 4010066
The preamplifier is wired so that a variable gain control may be inserted between the two stages. When used
with Ampex recorders (AG-440, AG-500, AG-600), the record level control on the equipment is so connected,
making the preamplifier a variable-gain device that accommodates a wide variety of professional-quality
microphones.
The unit can be used to drive any amplifier with a 100K ohm input impedance, at a 0.1 VRMS level. When so
used, the signal input is connected across pins 4 and 8, the unbalanced output is taken across pins 7 and 2
(ground). Power (+24VDC) is connected to pin 5, with pin 2 again as ground. The previously mentioned
variable-gain control (100K ohms) is connected across pins 3 and 6. Pin 1 should be connected to the case of
the unit, and should also be grounded.
(from the Ampex AG-600B user manual)



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2004:03:17 16:24:44-05:00
Create Date                     : 2004:03:17 16:16:23-05:00
Creator                         : Acrobat 4.05 Scan Plug-in for Windows
Producer                        : Acrobat 4.05 Scan Plug-in for Windows
Page Count                      : 5

EXIF Metadata provided by EXIF.tools