MR 500 HC Approved Lists

User Manual: MR 500 HC

Open the PDF directly: View PDF PDF.
Page Count: 214 [warning: Documents this large are best viewed by clicking the View PDF Link!]

January 2018
II-A-1
If you have any questions regarding the approved lists please contact the person/section indicated.
(1) AIR-ENTRAINING ADMIXTURES (Physical Lab) .................................................................................................................... 3
(2) CHEMICAL ADMIXTURES FOR CONCRETE (Physical Lab) ................................................................................................. 5
(3) CHEMICAL ADMIXTURES FOR CONCRETE TYPE S (Physical Lab) ................................................................................. 10
(4) CORROSION INHIBITING ADMIXTURES (Physical Lab) ..................................................................................................... 11
(5) COARSE AGGREGATE DATA (Physical Lab)......................................................................................................................... 12
(5) FINE AGGREGATE DATA (Grading A) (Physical Lab) ........................................................................................................... 17
(5) ASPHALT CONCRETE FINE AGGREGATE DATA (Physical Lab) ....................................................................................... 21
(5) LIGHTWEIGHT AGGREGATE DATA (Physical Lab) ............................................................................................................. 25
(6) AGRICULTURAL LIMING MATERIALS REGISTRATION (Chemistry Lab) ........................................................................ 26
(7) ANTISTRIPPING ADDITIVES (Asphalt Lab) ........................................................................................................................... 35
(8) ASPHALT RELEASE AGENTS (Asphalt Lab) .......................................................................................................................... 38
(9) APPROVED ELECTRODE AND FLUX-ELECTRODE COMBINATIONS (Structures) ........................................................ 41
(10) POWDERED EPOXY REBAR COATINGS (Physical Lab) ................................................................................................... 44
(11) FIBER MULCH, WOOD CELLULOSE - ANNUAL CHECK - (Landscape Development) ..................................................... 45
(12) CERTIFICATE OF COMPLIANCE AND GUARANTEE - GUARDRAIL MATERIALS (Structures)................................. 46
(13) ZINC RICH PAINT SYSTEMS LIST (Chemistry Lab) ............................................................................................................. 47
(14) PIPE JOINTS AND CONNECTIONS AND COATINGS (Soils Lab) ..................................................................................... 54
(15) APPROVED STUD SHEAR CONNECTORS (Structures) ...................................................................................................... 66
(16) APPROVED SURFACE MOUNTED and GROUND MOUNTED FLEXIBLE POST DELINEATORS (Chemistry Lab) ... 67
(17) QUALIFIED PREFORMED TAPE LIST (Chemistry Lab) ...................................................................................................... 69
(18) ABRASIVES (Chemistry Lab) .................................................................................................................................................. 72
(19) APPROVED LIST OF ABSORPTIVE SOUNDWALL COLOR COATINGS (Structures) .................................................... 73
(20) APPROVED WATER BORNE TRAFFIC PAINT (TYPE A) (Chemistry Lab) ...................................................................... 74
(21) QUALIFIED #14 ALUMINUM EPOXY MASTIC COATINGS (Chemistry Lab) .................................................................. 76
(22) PAVEMENT MARKERS (Chemistry Lab) ............................................................................................................................... 77
(23) DELINEATORS (Chemistry Lab) ............................................................................................................................................. 80
(24) MINERAL ADMIXTURES FOR HYDRAULIC CEMENT CONCRETE (Physical Lab) ...................................................... 82
(25) CORRUGATED METAL PIPE PRODUCERS ON QA/QC PROGRAM (Quality Assurance) ............................................... 84
(26) CONCRETE PIPE PRODUCERS ON QA/QC PROGRAM (Quality Assurance) .................................................................... 85
(27) QUALIFIED SILICONE RUBBER JOINT SEALER (Chemistry Lab) ................................................................................... 86
(28) POLYMERS FOR SEALING CRACKS IN HYDRAULIC CEMENT CONCRETE- (Physical Lab) ....................................... 88
(29) CHEMICAL / MECHANICAL ANCHORING SYSTEMS - (Physical Lab) .............................................................................. 90
(30) HYDRAULIC CEMENT CONCRETE SEALANTS, STAINS, AND COATINGS - (Physical Lab) ......................................... 96
(31) HYDRAULIC CEMENT CONCRETE REPAIR MATERIALS (Physical Lab) .................................................................... 102
(32) STABILIZERS FOR ASPHALT MIXTURES (Asphalt Lab) ................................................................................................. 108
(33) SHOTCRETE/GUNITE MIXTURES (Physical Lab) ............................................................................................................. 109
(34) CONCRETE PRECAST PRODUCERS ON QA/QC PROGRAM (Quality Assurance) ......................................................... 110
(35) FIBERS FOR USE IN HYDRAULIC CEMENT CONCRETE (Physical Lab) ...................................................................... 112
(36) MULCHES (HECP TYPES 1 THRU 4) (Maintenance Div.) .................................................................................................. 113
(37) WALL DRAIN SYSTEMS (Soils Lab) ................................................................................................................................... 114
(38) PIPE REHABILITATION SYSTEMS FOR METHOD D (FLEXIBLE PIPE LINER) (Soils Lab) ....................................... 115
(39) WICK DRAINS (Soils Lab) ..................................................................................................................................................... 121
(40) QUALIFIED SYSTEM W PAINTS (Chemistry Lab) ............................................................................................................. 122
(41) SUPERPAVE GYRATORY COMPACTORS FOR ASPHALT CONCRETE MIXTURES (Asphalt Lab) .......................... 123
(42) HIGH DENSITY POLYETHYLENE (HDPE) PIPE PRODUCERS (Quality Assurance) ..................................................... 124
(43) APPROVED WHITE AND YELLOW THERMOPLASTIC PRODUCTS - (Chemistry Lab) ................................................. 125
(44) APPROVED Q/A SUPPLIERS LIST (Quality Assurance) ..................................................................................................... 128
(45) QUALIFIED WOOD TREATMENT PLANTS (CHEMISTRY LAB) ................................................................................... 131
(46) SIGN SHEETING AND INK QUALIFIED PRODUCTS LIST (Chemistry Lab) .................................................................. 132
(47) ACRYLIC PAINT FOR ALUMINUM AND GALVANIZED SURFACES (Chemistry Lab) ............................................... 138
(48) APPROVED TYPE F CONSTRUCTION MARKINGS (Chemistry Lab).............................................................................. 139
(49) QUALIFIED SEALERS AND TOPCOATS FOR METALLIZED SURFACES (Chemistry Lab) ....................................... 143
(50) PERFORMANCE GRADED (PG) BINDER SOURCES ON VA ASPHALT ACCEPTANCE PROGRAM - (Asphalt Lab) 144
(50.1) EMULSIFIED ASPHALT SOURCES ON VA ASPHALT ACCEPTANCE PROGRAM (Asphalt Lab) ........................... 148
January 2018
II-A-2
(50.1A) APPROVED NONTRACK TACK COAT MATERIALS (Asphalt Lab) ............................................................................ 150
(51) APPROVED 2% COPPER NAPTHENATE (Chemistry Lab) ................................................................................................ 151
(52) ARTICULATED BLOCKS FOR SLOPE PROTECTION & DITCHLINING (Location & Design) ..................................... 152
(53) EROSION CONTROL MULCHES (Maintenance Div.) ......................................................................................................... 153
(54) FIBER MULCH SUPPLIERS (Please see list No. 11) ........................................................................................................... 155
(55) MULCH TACKIFIER SUPPLIERS (Maintenance Div.) ........................................................................................................ 156
(56) STANDARD EC-2 EROSION CONTROL BLANKETS (Maintenance Div.) ....................................................................... 158
(57) STANDARD EC-3 TYPE A, TYPE B, & TYPE C SOILS STABILIZATION MATS (Maintenance Div.) ......................... 161
(58) STANDARD EC-4 TYPE 2, ROCK CHECK DAM (Location & Design) ............................................................................. 168
(59) ST'D. EC-6, INLET PROTECTION APPROVED LIST (Location & Design) ...................................................................... 169
(60) ST'D. EC-8, DEWATERING BAG APPROVED LIST (Maintenance Div.) ......................................................................... 170
(61) GRAY IRON CASTING MANUFACTURERS/DISTRIBUTORS ON QA/QC PROGRAM (Quality Assurance) .............. 171
(62) CABLE GROUTS (Physical Lab) ............................................................................................................................................ 172
(63) GEOSYNTHETICS (Soils Lab)............................................................................................................................................... 173
(64) HYDRAULIC BARRIERS FOR USE IN STORM WATER RETENTION (Soils Lab) ....................................................... 182
(65) APPROVED SOUND BARRIER PANELS (James Ponticello).............................................................................................. 183
(66) APPROVED WARM-MIX ASPHALT PRODUCTS AND PROCESSES -- (Asphalt Lab) ..................................................... 184
(67) APPROVED PRECAST PAVEMENT SYSTEMS - (Affan Habib) .......................................................................................... 185
(68) STORM WATER MANAGEMENT TRASH RACKS (SWM-DR) - (Location & Design) ................................................... 186
(69) APPROVED FENCE MANUFACTURERS - (Chemistry Lab) ................................................................................................ 187
(70) APPROVED QA FENCE SUPPLIERS LIST - (Quality Assurance) ......................................................................................... 188
(71) POLYETHYLENE SHEETING - (Physical Lab) ...................................................................................................................... 189
(72) DETECTABLE WARNING PLATES - (Quality Assurance) .................................................................................................... 190
(73) APPROVED WHITE AND YELLOW PREFORMED THERMOPLASTIC - (Chemistry Lab) .............................................. 192
(74) APPROVED POLYUREA PAVMENT MARKINGS -- (Chemistry Lab) ................................................................................ 193
(75) APPROVED EPOXY PAVMENT MARKINGS -- (Chemistry Lab) ........................................................................................ 194
(76) VIRGINIA GLASS BEAD APPROVED LIST -- (Chemistry Lab) ........................................................................................... 195
(77) ASPHALT PLUG JOINT SYSTEMS - (Physical Lab) .............................................................................................................. 196
(78) APPROVED COLD MIX ASPHALT - (Asphalt Lab) ............................................................................................................... 197
(79) MULCHES (HECP TYPES 1-4) (Maintenance Division) ....................................................................................................... 199
(80) TEMPORARY ROLLED EROSION CONTROL PRODUCTS (EC-2 TYPES 1 THRU 4) (Location & Design) ................ 201
(81) PERMANENT ROLLED EROSION CONTROL PRODUCTS (EC-3 TYPES 1 THRU 3) (Location & Design) ................ 203
(82) BIOLOGICAL GROWTH STIMULANTS (Maintenance Division) ...................................................................................... 204
(83) SEDIMENT RETENTION ROLLS (COMPOST FILTER SOCKS AND SEDIMENT TUBES (Location & Design) ......... 205
(84) CLASS B MANUFACTURED TOPSOIL (Maintenance Division) ........................................................................................ 206
(85) CEMENT MANUFACTURERS - (Physical Lab) ...................................................................................................................... 207
(86) MANUFACTURED TREATMENT DEVICES - (Location & Design) .................................................................................... 207
(87) APPROVED POWDER COATING MANUFACTURERS (Chemistry Lab) ......................................................................... 213
(88) APPROVED POWDER COATING FACILITIES OF GALVANIZED SURFACES (Chemistry Lab) ................................. 214
August 2017
II-A-3
List No. 1
(1) AIR-ENTRAINING ADMIXTURES (Physical Lab)
The following list of air-entraining admixtures is approved for use in hydraulic cement concrete. They meet
the requirements of AASHTO M-154.
To have a product included on this Approved List, the manufacturer shall submit a letter with a notarized
signature stating that the chemical admixture meets the requirements in Section 215.02 of the VDOT Road
and Bridge Specifications. Accompanying this letter must be independent laboratory data demonstrating
compliance to the specification. Upon approval, the Manufacturer will be required to submit a letter each
year with a notarized signature stating that the chemical admixture meets the requirements of AASHTO M
-154 and that the product has not changed in formulation since initial approval.
Product
Code #
BASF, Inc./ Master Builders
MasterAir AE400
76
MasterAir AE90
54
MasterAir VR 10
3
MasterAir AE 200
30
MasterCell 25
71
Chryso, Inc.
Chryso Air R2
83
Chryso Air 260
79
Chryso Air 260 Ultra
81
Cellular Concrete Technologies
Stable Air
85
The Euclid Chemical Company
Eucon AEA-92
55
Eucon Air MAC12
89
Eucon Air Mix 200
56
Eucon Air Mix
19
Eucon Air 30
58
Eucon Air 40
59
Fritz-Pak Corp.
Air Plus
63
Super Air Plus
84
General Resource Technology
Polychem SA
90
Polychem SA-50
91
Polychem Vr
92
GCP Applied Technologies
Airalon 3000
75
Daravir 1000
52
Daravair AT30
70
Daraviar AT60
65
Darex AEA
1
Darex II AEA
41
Terapave AEA
82
August 2017
II-A-4
List No. 1 (cont.)
(1) AIR-ENTRAINING ADMIXTURES
Manufacturer
Product
Code #
Premiere Concrete Admixtures
ConAir
77
ConAir 260
78
RussTech
RAE 260
88
RVR-15
53
RSA-10
61
Sika Corp
Sika AEA 14
66
Sika Air
64
Sika Air 260
62
Sika Air 360
73
January 2018
II-A-5
List No. 2
(2) CHEMICAL ADMIXTURES FOR CONCRETE (Physical Lab)
The following list of admixtures is approved for use in hydraulic cement concrete. They meet the requirements of
ASTM C-494 for the respective types. The listed types are;
“A” Water Reducing, “B” Retarding, “C” Accelerating, “D” Water Reducing and Retarding, “E” - Water
Reducing and Accelerating, “F” – High Range Water Reducing,
“G” - High Range Water Reducing and Retarding.
To have a product included on this Approved List, the manufacturer shall submit a letter with a notarized signature
stating that the chemical admixture meets the requirements in Section 215.02 of the VDOT Road and Bridge
Specifications. Accompanying this letter must be independent laboratory data demonstrating compliance to the
specification. Upon approval the Manufacturer will be required to submit a letter each year with a notarized
signature stating that the chemical admixture meets the requirements of ASTM C-494 and that the product has not
changed in formulation since initial approval.
Manufacturer
Product
Code #
Type
A
Type
B
Type
C
Type
D
Type
E
Type
F
Type G
BASF
MasterGlenium 3030
183
A
F
Corporation
MasterGlenium 3400
193
A
F
MasterGlenium 7500
211
A
F
MasterGlenium 7620
366
F
MasterGlenium 7700
210
F
MasterGlenium 7710
227
F
MasterLife CI 30
279
C
MasterPolyHeed 1020
194
A
F
MasterPolyHeed 1025
195
A
F
MasterPolyHeed 900
204
A
MasterPolyHeed 997
76
A
F
MasterPolyHeed N
30
A
MasterPozzolith 200
143
A
B
D
MasterPozzolith 322
16
A
B
D
MasterPozzolith 700
357
A
B
D
MasterPozzolith 80
174
A
B
D
MasterRheobuild 1000
66
F
MasterSet AC 534
239
C
MasterSet Delvo
138
B
D
MasterSet FP 20
205
C
E
MasterSet R 100
141
B
D
MasterSet R 122
142
B
D
MasterSet R 300
159
B
D
MasterSet R 961
235
B
D
PS 1466
202
A
F
Chryso, Inc.
Chryso Tard 100R
246
D
EnviroMix 340
250
A
January 2018
II-A-6
List No. 2(cont.)
(2) CHEMICAL ADMIXTURES FOR CONCRETE
Manufacturer
Product
Code #
Type
A
Type
B
Type
C
Type
D
Type
E
Type
F
Type G
Chryso, Inc.
EnviroMix 380
248
A
F
EnviroMix 728
249
A
Fluid Optima 203
196
A
F
Fluid Optima 216
229
A
F
Fluid Optima 256 Emx
251
A
F
Fluid Premia 180
200
A
F
Plast 209
247
A
TurboCast 650A
262
C
TurboCast NCT
263
C
E
The Euclid
Accelguard G3
407
C
E
Chemical
Accelguard NCA
415
C
E
Company
Accelguard 80
233
C
Eucon 1037
231
A
F
Eucon 37
5
A
F
Eucon 537
131
D
G
Eucon CIA
416
C
E
Eucon LR
123
A
D
Eucon LW
121
A
Eucon MR
169
A
F
Eucon MRX
130
A
F
Eucon NR
144
A
D
Eucon NW
120
A
Eucon Retarder 75
164
D
Eucon Retarder 100
55
D
Eucon SP
124
A
F
Eucon SPC
269
A
F
Eucon SPJ
87
A
F
Eucon WR-75
18
A
Eucon WR-91
114
A
D
Eucon X-15
125
A
F
Plastol Ultra 109
234
A
F
Plastol Ultra 209
408
A
F
Plastol 6400
417
F
Plastol 6420
438
A
F
January 2018
II-A-7
List No. 2(cont.)
(2) CHEMICAL ADMIXTURES FOR CONCRETE
Manufacturer
Product
Code #
Type
A
Type
B
Type
C
Type
D
Type
E
Type
F
Type G
Fritz-Pak Corp.
Delay Set
163
B
D
Delay Set Mini
163
B
D
FR-1
157
B
D
Supercizer 5
374
F
Supercizer 6
154
F
Supercizer 7
156
F
G
NCA
373
C
E
GCP Applied
ADVA 140M
212
A
F
Technologies
ADVA 150M
399
A
F
ADVA 198
375
F
ADVA 390
370
F
ADVA Cast 555
404
F
ADVA CAST 575
209
A
F
ADVA CAST 585
367
F
ADVA Cast 600
184
F
ADVA Flex
206
A
F
ADVA ITM 750
440
F
Clarena MC 2000
439
A
F
Daracem 55
115
A
Daraset 400
244
C
Daratard 17
85
D
Daratard HC
82
D
DCI
368
C
E
Eclipse 4500
432
F
EXP 950
208
A
F
MIRA 95
376
F
Polarset
189
C
Recover
172
D
V-MAR VSC500
232
D
WRDA 35
23
A
D
WRDA 82
29
A
Zyla 620
252
A
Zyla 640
245
A
Zyla R
266
B
D
January 2018
II-A-8
List No. 2(cont.)
(2) CHEMICAL ADMIXTURES FOR CONCRETE
Manufacturer
Product
Code #
Type
A
Type
B
Type
C
Type
D
Type
E
Type
F
Type G
General
Dynamon SX
423
F
Resource
EVO 2500
434
F
Technology
Polychem 3000
424
A
F
Melchem
435
F
Polychem CL
425
C
Polychem R
426
B
D
Polychem RENU
427
B
Polychem SPC
428
F
Polychem Super Set
429
C
E
Polychem Super Set Plus
430
C
Polychem 400 NC
436
A
Polychem 850
437
A
Premiere
EcoFlo Green
359
A
F
Concrete
NitroCast K
261
C
Admixtures
NitroCast NC
412
C
NitroCast 701
289
C
OptiFlo 50
259
A
D
OptiFlo 100R
261
B
D
OptiFlo 500
255
A
D
OptiFlo 700
262
A
F
OptiFlo MR
257
A
F
OptiFlo Plus
256
A
Prolong
364
B
UltraFlo DP
414
F
UltraFlo 2000
254
F
UltraFlo 4600
253
F
UltraFlo 5600
413
F
RussTech, Inc.
Extendflo X90
406
A
FinishEase NC
126
A
G
LCNC 166
410
E
LC 400
106
A
LC 400 P
105
A
D
LC 400 R
109
D
LC 500
241
A
D
January 2018
II-A-9
List No. 2(cont.)
(2) CHEMICAL ADMIXTURES FOR CONCRETE
Manufacturer
Product
Code #
Type
A
Type
B
Type
C
Type
D
Type
E
Type
F
Type G
RussTech, Inc.
Renu
365
D
Russ Tech RCI
242
C
Superflo 2000 SCC
400
A
F
Superflo 2000 RM
258
A
F
Superflo 2040 RM
409
Á
F
Superflo 440
107
A
F
Superflo 443
108
A
F
Sika
Plastiment
145
D
Corporation
Plastiment XR
397
D
Plastocrete 10 N
151
A
B
D
Plastocrete 161
27
A
Sika CNI
381
C
Sikamix NCA
401
C
Sika Rapid -1
278
C
E
Sika Set NC
268
C
E
Sikament 686
203
A
F
Sikament AFM
161
A
F
Sikament SPMN
167
A
F
Sikament 475
422
A
F
Sikaplast 200
152
A
G
Sikaplast 300 GP
223
A
Sikatard 440
272
B
D
ViscoCrete 1000
358
A
F
ViscoCrete 2100
190
A
F
ViscoCrete 4100
191
A
F
ViscoCrete 6100
168
A
F
January 2018
II-A-10
List No. 3
(3) CHEMICAL ADMIXTURES FOR CONCRETE TYPE S (Physical Lab)
The following list of admixtures is approved for use in hydraulic cement concrete. They meet the requirements
of ASTM C-494 for type “S” – Specific Performance.
To have a product included on this Approved List, the manufacturer shall submit a letter with a notarized
signature stating that the chemical admixture meets the requirements of ASTM C-494 Type “S”.
Accompanying this letter must be independent laboratory data demonstrating compliance to the specification.
Upon approval, the Manufacturer will be required to submit a letter each year with a notarized signature stating
that the chemical admixture meets the requirements of ASTM C-494 and that the product has not changed in
formulation since initial approval.
Manufacturer
Product
Code #
Type
BASF
MasterMatrix 33
411
Rheology Controlling Admixture
Corporation
MasterMatrix VMA 362
369
Viscosity-Modifying Admixture
MasterMatrix VMA 450
379
Viscosity-Modifying Admixture
MasterLife ASR 30
405
ASR Inhibiting Admixture
MasterLife SRA 20
418
Shrinkage Reducing Admixture
MasterLife SRA 35
419
Shrinkage Reducing Admixture
MasterSure Z 60
273
Workability-Retaining admixture
EdenCrete Industries
Inc.
EdenCrete
421
Special Preformance Admixture
GCP Applied
Eclipse 4500
432
Shrinkage Reducing Admixture
Technologies
Rasir
395
ASR Mitigating Admixture
V-Mar 3
274
Antiwashout Admixture
V-Mar F100
271
Concrete rheology-modifying
admixture
General
Resource
Polychem VMA
431
Viscosity-Modifying Admixture
Technology
Premier Construction
Products Group
PREVent C
378
Shrinkage Reducing Admixture
Sika Corporation
Sika Control ASR
402
ASR Mitigating Admixture
Sika Control NS
433
Shrinkage Reducing Admixture
Sika Control 75
403
Shrinkage Reducing Admixture
Sika Control-220
382
Shrinkage Reducing Admixture
Sika Stabilizer 4 R
277
Viscosity-Modifying Admixture
Sika Stabilizer 300 SCC
420
Viscosity-Modifying Admixture
Sika ViscoFlow 2020
398
Workability-Retaining Admixture
Sika Watertight Power
380
Permeability Reducing Admixture
December 2016
II-A-11
List No. 4
(4) CORROSION INHIBITING ADMIXTURES (Physical Lab)
The following list of corrosion inhibiting admixtures is approved for use in hydraulic cement concrete. They
meet the requirements in Section 215.02(j) of the VDOT Road and Bridge Specifications.
Upon approval the Manufacturer will be required to submit each year a letter with a notarized signature stating
that the chemical admixture meets the requirements of Section 215.02(j) of the VDOT Road and Bridge
Specifications and that the product has not changed in formulation since initial approval.
Manufacturer
Product
Code #
BASF
MasterLife CI 30
279
Corporation
Great Eastern
Chemstrong CI
Technologies,
L.L.C.
Euclid Chemical
Eucon CIA
Premiere Concrete Admixtures
Impede CNI
RussTech, Inc
Russ Tech RCI
242
Sika
CNI
381
Corporation
W. R. Grace
DCI
368
& Company
DCI S
January 2018
II-A-12
List No. 5
RESULTS OF QUALITY TESTS ON
(5) COARSE AGGREGATE DATA (Physical Lab)
Producer and Location
Date Test
Performed
Classification
*See Legend
SSD
Specific
Gravity
Absorption
L.A. Abrasion
Loss
Dry Bulk
Specific
Gravity
A
B
C
Acres Sand & Stone
8090 Stuarts Draft, VA
4/16
Rv. Gvl.
2.58
1.0
38.3
2.56
Aggregate Industries
4100 Charles City, VA 7 & 78
3/10
2.60
0.9
35.4
2.57
6043 Fulks
2/13
Qz.
2.63
0.5
35.5
2.62
6027 Mattaponi, VA #57
2/08
Qz.
2.63
0.4
40.5
2.62
8086 Millville, WV.
6/17
Ls.
2.85
0.4
17.1
2.84
6033 Rappahannock Farm #57
8/16
Qz.
2.64
0.3
34.4
2.630
Appalachian Aggregates
8069 Hillsboro, WV
2013
Ls.
2.70
1.1
17.0
2.67
Ararat Rock Products
3060 Eden Quarry Cascade
1/12
2.64
0.6
15.2
2.62
2003 Mt. Airy, NC
2015
Gn.
2.76
0.6
27.5
2.74
Aylett Sand & Gravel
6018 Aylett, VA # 56
5/17
Qz.
2.62
0.4
36.3
2.611
Barger, C. W. & Sons
8004 Lexington, VA
4/13
Ls.
2.73
0.2
18.9
2.72
Bluewater Industries
1058 Abingdon
4/14
Do.
2.85
0.3
21.1
19.6
2.84
S. W Barrick
9066 Woodsboro, MD #57
8/13
Ls.
2.71
1.4
22.2
2.70
Boxley Aggregates
2004 Blue Ridge, VA
2014
Ls.& Do.
2.81
0.4
14.2
2.80
2009 Fieldale, VA
2017
Gn.
2.82
0.5
27.3
2.81
3003 Lynchburg, VA
2017
Do., Ls.
2.73
0.4
22.1
2.72
8025 Lowmoor, VA
7/14
Ls. & Do.
2.73
0.3
20.0
2.73
3030 Mt. Athos Plant
Concord, VA
2017
Gs.
3.05
0.3
16.2
3.04
3034 Piney River, VA
2017
Ap
2.83
0.4
15.2
2.82
Branscome Charles City
4005 Hofmyer Plant #57
8/13
Rv. Gvl.
2.61
0.7
37.8
2.590
4050 Layfield Plant #78
8/12
Rv. Gvl.
2.57
0.5
38.7
2.55
January 2018
II-A-13
List No. 5 (cont.)
COARSE AGGREGATES (Cont.)
Producer and Location
Date Test
Performed
Classificati
on
*See
Legend
SSD
Specific
Gravity
Absorption
L.A. Abrasion
Loss
Dry Bulk
Specific
Gravity
A
B
C
Carmeuse
2006 Buchanan, VA
2013
L.s. & Do.
2.84
0.3
18.7
2.84
8005 Strasburg, VA
5/14
Ls.
2.70
0.3
25.4
2.694
8028 Winchester, VA
6/14
Ls.
2.71
0.2
23.1
2.706
Cedar Mountain Stone Corporation
7031 Mitchell, VA # 57
4/14
Db. (Tr.)
3.04
0.5
20.4
20.3
3.02
Caney Enterprizes
6046 Moss Neck # 67
4/17
2.63
0.4
38.1
2.620
Chantilly Crushed Stone Co.
9004 Chantilly, VA # 57
1/14
Db. (Tr.)
3.01
0.6
15.5
2.99
D. M. Conner
8084 Stuarts Draft, VA
3/17
Rv. Gvl.
2.58
1.0
41.7
2.555
E. Dillon & Co.
1064 Swords Creek, VA
3/14
Do.
2.83
0.3
20.5
19.6
2.822
F & M Construction Co.
1011 Carroll County, VA
2013
Qzi.
2.65
1.2
19.5
2.62
Frazier Quarry
8067 Elkton, VA
7/14
Ls. & Do.
2.79
0.2
18.5
2.79
8062 Harrisonburg, VA
5/14
Ls.
2.72
0.3
18.8
2.710
8083 Timberville, VA
6/16
Ls.
2.73
0.3
20.9
2.72
Hanson Aggregates
8017 Front Royal, VA
6/15
Ls.
2.72
0.4
18.9
2.704
Heard Aggregates
5072 Waverly, VA
2/13
17
Ingileside
1018 Princeton, WV
4/14
Ls.
2.67
0.4
26.8
21.8
2.658
Inwood Quarries,
8092 Inwood, W. VA
4/13
Ls.
2.72
0.4
19.0
2.71
King William Sand & Gravel
6045 Queenfield plant #57
12/16
2.65
0.3
37.0
2.645
LaFarge
9067 Frederick, MD
8/13
2.71
0.4
21.0
2.70
January 2018
II-A-14
List No. 5 (cont.)
COARSE AGGREGATES (Cont.)
Producer and Location
Date Test
Performed
Classification
*See Legend
SSD
Specific
Gravity
Absorption
L.A. Abrasion
Loss
Dry Bulk
Specific
Gravity
A
B
C
Loudoun Quarry
9011 Herndon, VA
2/16
Db.(Tr.)
2.98
0.4
14.2
2.97
Luck Stone Corp.
7052 Bealton, VA #57
6/14
Db.
2.98
0.5
11.7
2.96
9003 Manassas, VA #57
4/14
Db. (TR.)
2.94
0.8
13.6
2.92
4002 Burkeville, VA #78
6/16
Am.Gn.& Gr
2.65
0.7
41.1
2.630
9007 Centreville, VA
1/14
Db.(Tr.)
2.92
0.7
13.4
2.90
9020 Goose Creek, VA
5/16
Db.(Gr.)
2.94
0.8
9.7
2.91
3063 Farmville, VA #57
10/17
2.74
0.5
31.6
2.725
9010 Leesburg, VA
2/16
Db.(Tr.)
2.97
0.7
14.5
2.94
4001 Manakin, VA #57
3/17
Gn.& Gr.
2.60
0.5
28.0
2.587
4045 Powhatan, VA #57
7/16
Am.Gn.&
Mmp.Gr.
2.75
0.6
15.8
2.740
4011 Rockville, VA # 57
7/17
Qzi.&
Gn.(Mmp)
2.65
0.3
17.2
2.641
7043 Ruckersville, VA #57
2/14
Gn. & Gr.
2.73
0.5
25.8
2.72
7005 Shadwell, VA #57
4/14
Gs
2.92
0.5
12.7
2.91
4021 South Richmond, VA
9/14
Am, Bi., Gn.
& Gr.
2.74
0.3
39.3
2.73
6040 Spotsylvania, VA #57
9/15
Gr.
2.72
0.6
32.9
2.70
7006 Stevensburg, VA
5/16
Sis.
2.75
0.6
10.4
2.73
Martin Marietta Aggregates
4054 Anderson Creek #
57
5/16
2.72
0.4
14.9
2.711
4008 Doswell, VA # 57
11/17
2.76
0.5
16.4
2.744
4046 Warbro Road # 57
4/16
Am.Gn.& Gr
2.70
0.3
29.0
2.692
7017 Red Hill Plant # 57
7/14
Gr.
2.80
0.4
22.4
2.79
Maymead Lime Co.
1044 Mountain City, TN
3/14
Gr.
2.72
0.5
22.2
18.4
2.709
Mountain Aggregates
1003 Burdine, KY
2014
Ls.
2.69
0.7
20.4
23.6
2.66
1063 Elkhorn City, KY
2014
Ls.
2.83
0.7
18.9
23.1
2.82
Mountain Materials
1037 Castlewood, VA
3/14
Do.
2.74
0.3
21.8
18.7
2.728
1026 Dickensonville
2014
Ls.
2.70
0.6
25.6
2.687
1066 Glade Spring, VA
3/14
Ls.
2.77
0.2
18.0
17.3
2.762
1080 Mouth of Wilson, VA
3/14
Gr.
2.70
0.5
23.9
27.1
2.689
Pennsy Supply
5085 Harrisonburg, PA #8
6/13
2.80
0.5
18.5
2.78
January 2018
II-A-15
List No. 5 (cont.)
COARSE AGGREGATES (Cont.)
Producer and Location
Date Test
Performed
Classification
*See Legend
SSD
Specific
Gravity
Absorption
L.A. Abrasion
Loss
Dry Bulk
Specific
Gravity
A
B
C
Stuart M. Perry, Inc.
8020 Berryville, VA
5/14
Ls. & Do.
2.86
0.3
15.3
2.854
8021 Winchester, VA
6/14
Ls. & Do.
2.73
0.3
16.5
2.719
RBS Inc.
8097 Greystone Lewisburg, WV
8/17
Ls.
2.72
0.3
18.0
2.710
Rockbridge Stone
8013 Glasgow, VA
6/14
Ls. & Do.
2.80
0.3
17.4
2.789
8076 Stuarts Draft, VA
1/17
Rv. Gvl.
2.59
1.4
32.2
2.55
8087 Monterey, VA
5/16
Ls.
2.71
1.5
25.1
2.66
Rockydale Quarries
3001 Appomattox, VA
2017
Do. Ma.
2.84
0.3
32.7
2.83
8007 Broadway, VA
5/14
Ls. & Do.
2.82
0.2
16.2
2.811
7072 Charlottesville #57
1/18
2.62
0.8
35.9
2.66
8057 Staunton, VA
4/13
Ls. & Do.
2.82
0.3
15.9
2.81
8006 Forestville, VA
4/16
Ls.
2.71
0.4
20.7
2.703
2015 Roanoke, VA
2014
Ls. & Do.
2.78
1.2
20.5
2.75
2065 Gladehill, VA
2017
Am.
3.08
0.7
28.5
3.06
Rogers Group
1113 Creekside Wardell, VA
4/14
Ls.
2.73
0.6
23.5
2.717
1114 Dickensonville, VA
4/14
2.75
1.0
22.4
21.2
2.726
Salem Stone Corp.
2059 Blacksburg,
VA Ls. &
Do 2.83 0.5
13.7
2.81
2014
Ls. & Do
2.81
0.5
20.3
2.80
2044 Dublin, VA
2014
Ls.
2.71
1.0
15.6
2.69
2076 Floyd, VA
2017
Am.
2.78
0.6
35.2
2.76
2047 Shawsville, VA
2014
Ls. & Do.
2.80
0.7
18.9
2.78
1062 Sylvatus, VA
4/14
Qzi.
2.69
0.9
19.5
16.8
2.667
Shenandoah Stone
8074 Vesuvius, VA
3/16
Rv. Gvl.
2.61
0.8
31.1
2.588
Southside Materials
3009 Shelton, NC
2017
Gn. & Gr.
2.63
0.4
23.6
2.62
January 2018
II-A-16
3010 South Boston, VA
2017
Gr.
2.76
0.6
21.5
2.74
Specialty Granules
8098 Blue Ridge Summit, PA
7/17
B.
3.02
0.5
18.6
3.006
List No. 5 (cont.)
COARSE AGGREGATES (Cont.)
Producer and Location
Date Test
Performed
Classification
*See Legend
SSD
Specific
Gravity
Absorption
L.A. Abrasion
Loss
Dry Bulk
Specific
Gravity
A
B
C
Vulcan Materials Co.
1076 Bristol, TN
3/14
Ls.
2.73
0.3
21.3
17.4
2.721
4015 Dale - Chester, VA
6/16
Bi. Gn .& Gr.
2.66
0.4
33.3
2.652
1040 Enka, NC
3/04
Gr.
2.73
0.6
33.7
35.7
2.72
6012 Garrisonville, VA
11/14
Gr.
2.93
0.6
14.6
2.91
7065 Hanover, PA
4/13
2.80
0.5
30.1
2.79
5016 Havre de Grace, MD #57
9/15
Tr.
2.83
0.4
14.9
2.82
4027 Hylas, VA
7/17
Mmp.Gr.&
Phy
2.65
0.4
17.8
2.641
4016 Jack - Petersburg, VA
6/16
Bi. Gn.& Gr.
2.65
0.4
24.5
2.633
1035 Kingsport, TN
3/14
Ls.
2.84
0.3
20.1
17.4
2.834
9022 Manassas, VA # 57
1/14
Db. (Tr.)
2.80
0.9
11.5
2.80
1093 Norton, VA
3/14
Ls.
2.71
0.6
18.3
20.2
2.691
9023 Occoquan, VA # 57
4/17
Gn. & Gr.
2.67
0.5
26.0
2.66
4018 Puddledock,
Petersburg, VA #57
7/15
Qz. Gvl.
2.59
0.7
32.0
2.570
5004 Skippers, VA
Gr.
2.76
0.5
14.5
2.75
8071 Staunton, VA
5/14
Ls.
2.72
0.2
22.2
2.716
4052 Union Level, VA
6/15
2.72
0.3
36.0
2.710
1115 Tazewell. Tn.
2014
Ls.
2.72
0.4
21.6
2.708
7015 Warrenton, VA
5/16
Db. (Tr.)
2.92
1.2
13.1
2.89
Wythe Stone Co.
1082 Wytheville, VA
3/14
Ls.
2.81
0.3
17.2
16.6
2.798
York Building Supply
5086 York, PA #8
5/13
2.77
0.7
20.5
2.755
January 2018
II-A-17
List No. 5 (cont.)
(5) FINE AGGREGATE DATA (Grading A) (Physical Lab)
The data listed herein represents the latest determinations as of publication date. All figures are subject to
change, particularly the fineness modulus. They are, therefore, intended only as a guide.
Producer and Location
Date Test
Performed
Classification
*See Legend
SSD
Specific
Gravity
Absorption
F.M.
Soundness
Loss
Percent
Voids
Acres Sand & Stone
8090 Stuarts Draft, VA
1/15
Rv. Gvl.
2.62
0.7
2.0
8.6
47.8
Aggregate Industries
4100 Charles City, VA
4/10
2.59
0.5
2.9
7.8
49.7
6043 Fulks
1/13
N. S.
2.62
1.0
2.8
2.9
50.9
6029 Gloucester, VA
8/17
2.62
0.2
2.6
1.1
46.8
9040 Kirby Road Clinton, MD
8/13
N.S.
2.62
0.7
2.8
4.2
49.4
9060 LaPlata, MD
5/13
N.S.
2.62
0.8
3.1
6.3
48.0
6027 Mattaponi
7/12
Gr.
2.58
0.2
2.6
2.7
47.4
8086 Millsville, WV
5/17
Ls.
2.86
0.6
2.6
4.4
46.8
6033 Rappahannock Farm
Fredericksburg, VA
4/15
2.62
0.9
3.1
13.0
50.4
APAC Carolina
2061 Candor, NC
2013
N.S.
2.62
0.5
3.0
7.5
45.1
Aylett Sand & Gravel
6018 Aylett, VA
5/17
Qz.
2.62
0.2
2.9
4.4
47.4
Boxley Aggregates
2004 Blue Ridge, VA
2016
Ls. & Do.
2.68
2.0
2.7
6.3
44.3
2009 Fieldale, VA
2017
Gn.
2.73
2.1
2.7
10.6
49.0
3034 Piney River, VA
2013
Ap.
2.72
1.3
7.8
49.0
3003 Lawyers
2017
Ar. Ma
2.71
1.0
3.1
18.1
49.0
Branscome Sand
4005 Charles City, VA
(Hoffmeyer Plant)
4/10
N.S.
2.61
0.4
2.9
9.9
49.4
5074 Stony Creek, VA
6/17
N.S.
2.61
0.5
3.0
4.9
51.0
Blair Sand & Materials
5091 Capron, VA
9/17
N.S.
2.61
0.7
3.0
5.1
44.5
Commercial Ready Mix Pit #2
5055 Pendleton, NC
3/06
N.S.
2.64
0.5
2.6
4.8
51.0
Cardinal Stone Co.
1009 Galax, VA
3/05
Gr.
2.75
0.8
3.0
9.4
54.4
Carmeuse
8005 Strasburg, VA
8/14
Ls.
2.67
0.7
3.0
10.9
44.4
8028 Winchester, VA
3/17
Ls.
2.68
1.0
3.1
16.8
46.7
January 2018
II-A-18
List No. 5 (cont.)
FINE AGGREGATE DATA (Cont.)
(Grading A)
Producer and Location
Date Test
Performed
Classification
*See Legend
SSD
Specific
Gravity
Absorption
F.M.
Soundness
Loss
Percent
Voids
Chaney Enterprises
6046 Moss Neck
3/17
N.S.
2.63
0.3
2.7
4.3
50.6
9061 Waldorf, MD
4/13
N.S.
2.61
0.6
3.0
4.5
47.7
D. M. Conner
8084 Stuarts Draft, VA
3/17
N.S.
2.61
0.9
2.7
15.3
46.3
E. Dillon & Co.
1064 Swords Creek, VA
3/14
Do.
2.85
0.3
2.67
8.6
49.1
Disney Sand & Gravel
5082 Hebron, MD
5/16
2.61
0.6
2.47
6.0
40.4
English Sand & Gravel
3051 Otter River Rte. 24
2013
N.S.
2.61
2.0
2.8
10.6
45.5
Frazier Quarry
8062 Harrisonburg, VA
3/17
Ls.
2.69
0.7
2.9
6.1
43.7
G & S Materials
3053 Candor, NC
2012
2.61
0.8
2.6
9.8
49.4
Hanson Aggregates
8017 Front Royal, VA
2/15
Ls.
2.77
1.0
2.82
12.9
46.9
Heard Aggregate
5072 Waverly, VA
3/17
N.S.
2.60
0.4
2.91
5.0
50.5
Howlin Concrete Co.
9056 Mechanicsville, MD
8/13
N.S.
2.61
0.8
2.69
3.8
47.7
Inwood Quarries,
8092 Inwood, W. VA
6/17
Ls.
2.67
1.0
3.1
7.3
45.98
King William Sand & Gravel
6045 Queenfield plant
6/17
N.S.
2.63
0.3
2.9
3.9
49.8
Luck Stone Corp.
6014 Caroline, VA
3/12
Qz.
2.62
0.4
2.76
6.0
48.1
4045 Powhatan, VA
7/16
Am.Gn.&
Mmp.Gr.
2. 63
0.2
2.81
4.3
49.4
M L Joseph
5075 Georgetown Del
6/13
2.60
0.6
2.52
2.6
41.1
January 2018
II-A-19
List No. 5 (cont.)
FINE AGGREGATE DATA (Cont.)
(Grading A)
Producer and Location
Date Test
Performed
Classification
*See Legend
SSD
Specific
Gravity
Absorption
F.M.
Soundness
Loss
Percent
Voids
Mason-Dixon
9068 Port-Deposit, MD
2/13
N.S.
2.62
0.5
2.8
8.4
50.2
McCarty Sand
3025 Danville, VA
2017
N.S.
2.61
1.3
2.85
20.1
47.4
Merrick Sand & Gravel
9001 Ingleside, MD
10/10
N. S.
2.59
1.0
2.8
12.8
70.0
Mountain Materials
1037 Castlewood, VA
3/14
Do.
2.74
0.7
2.9
7.4
46.4
Norman Sand
Candor, NC
9/17
Ns.
2.62
0.4
2.6
2.2
49.7
Stuart M. Perry, Inc
8021 Winchester, VA
6/14
Ls. & Do.
2.66
1.1
2.82
5.0
44.8
Rockbridge Stone
8013 Glasgow
1/18
Ls.
2.80
1.0
3.1
6.4
46.4
Rockydale Quarries Corp.
8007 Broadway, VA
4/16
Ls.
2.75
1.3
2.5
10.6
49.6
8006 Forestville, VA
5/16
Ls.
2.65
1.7
3.1
5.3
45.4
2015 Roanoke, VA
1/06
Ls. & Do.
2.80
1.6
3.1
5.4
51.1
Sand Mountain Sand, Inc.
1083 Wytheville, VA
3/05
N.S.
2.64
0.4
2.5
10.9
49.8
Shenandoah Stone
8074 Vesuvius, VA
2/15
N.S.
2.58
1.8
2.6
15.2
45.3
Shoreline
5088 Stony Creek, VA
5/15
N.S.
2.59
0.8
2.83
11.5
45.3
Sloan Materials
9062 Leonardtown, MD
4/13
N.S.
2.61
0.7
2.99
4.3
47.4
Southside Materials
3055 Drake’s Branch, VA
2017
N.S.
2.67
0.5
2.66
10.4
50.1
Stony Creek Sand & Gravel
5035 Carson
4/11
2.58
0.9
3.03
15.4
41.0
January 2018
II-A-20
List No. 5 (cont.)
FINE AGGREGATE DATA (Cont.)
(Grading A)
Producer and Location
Date Test
Performed
Classification
*See Legend
SSD
Specific
Gravity
Absorption
F.M.
Soundness
Loss
Percent
Voids
Templeton Paving
2057 Goose Creek
2017
N.S.
2.63
2.0
2.95
15.1
45.8
USA Aggregate
1058 Abingdon
4/14
Do.
2.83
0.3
2.67
8.6
49.1
Virginia Sand & Stone
6015 Trice (Newtown)
3/12
N. S.
2.64
0.3
2.75
4.4
49.8
Vulcan Materials Co.
1076 Bristol, TN
3/14
Ls.
2.71
0.7
2.83
6.4
43.9
6012 Garrisonville, VA
Gr.
3.01
0.4
3.1
11.1
57.3
1035 Kingsport, TN
3/14
Ls.
2.82
0.5
2.84
5.2
46.3
5017 Pocomoke City, MD
5/16
2.62
0.4
2.62
3.8
40.0
4018 Puddledock Petersburg, VA
7/17
N.S.
2.60
0.3
2.82
8.9
48.9
8071 Staunton, VA
1/17
Ls.
2.65
1.9
2.9
11.2
46.9
5039 Laurel, DE
5/16
2.60
0.7
2.69
8.1
41.0
5089 Georgetown, DE
5/16
2.60
0.7
2.49
6.8
40.1
Wythe Stone Co.
1082 Wytheville, VA
3/14
N.S.
2.64
0.3
2.31
13.9
43.6
York Building Products
9012 Belvedere plant
3/11
2.62
0.5
2.61
4.1
49.3
9013 Perryville plant
3/11
2.63
0.4
2.62
1.3
48.5
January 2018
II-A-21
List No. 5 (cont.)
(5) ASPHALT CONCRETE FINE AGGREGATE DATA (Physical Lab)
The data listed herein represents the latest determinations as of this publication date. All figures are subject
to change. They are, therefore, intended only as a guide. NOTE: Tests performed with No. 10 screening
are indicated.
Producer and Location
Date Test
Performed
Classification
*See Legend
Dry Bulk
Specific
Gravity
Absorption
Soundness
Loss
Sand
Equivalent
Adams Construction Company
3052 Dan River
2015
N. S.
2.59
1.2
21.5
95
3045 South Boston, VA
2017
N. S.
2.57
1.3
20.1
94
Ararat Rock Products
2003 Mt. Airy, NC # A
2017
Gn.
2.776
0.6
21.3
Basic
4102 New Kent, VA
3/10
2.575
1.1
8.6
28.0
C. W. Barger, & Sons
8004 Lexington, VA #10
7/16
Ls.
2.615
1.5
6.7
76
Castle Sands Co.
2005 New Castle, VA
2013
Ss.
2.591
1.0
8.8
Boxley Aggregates
2009 Fieldale, VA
2013
Gn.
2.755
1.2
11.8
63
2043 Goose Creek
2017
N.S.
2.579
2.8
20.9
3003 Lawyers Road
#B
2013
Ar.Ma.
2.609
1.6
11.5
668
8025 Lowmoor, VA #10
4/16
Ls.
2.578
2.2
8.7
66
3030 Mt. Athos, VA B
2017
Gs.
2.999
1.0
6.6
93
3034 Piney River, VA
2017
Ap.
2.75
1.1
3.8
89
Cardinal Stone Co.
1009 Galax, VA
3/14
Bi.
2.742
1.0
13.7
93
Carmeuse
8005 Strasburg, VA
8/14
Ls.
2.66
0.7
10.9
91
8028 Winchester, VA
3/17
Ls.
2.652
1.0
16.8
83
Castle Sand Co.
2005 New Castle, VA
2013
Ss.
2.591
1.0
8.8
Cedar Mountain Stone Corp.
7031 Mitchell, VA #10
1/18
Db.(Tr.)
3.05
1.2
7.3
65
January 2018
II-A-22
List No. 5 (cont.)
ASPHALT CONCRETE FINE AGGREGATE DATA (Cont.)
Producer and Location
Date Test
Performed
Classification
*See Legend
Dry Bulk
Specific
Gravity
Absorption
Soundness
Loss
Sand
Equivalent
Chantilly Crushed Stone Co
9004 Chantilly, VA #10
1/14
Db. (Tr.)
2.99
0.6
11.8
53
Commercial Ready Mix Pit #2
5055 Pendleton, NC
3/06
N.S.
2.64
0.5
4.8
98
D. M. Conner
8084 Stuarts Draft, VA B sand
3/17
N.S.
2.591
0.9
15.3
69
English Sand & Gravel
3051 Otter River
2013
N.S.
2.553
2.0
10.6
96
F & M Construction Co.
1011 Carroll County, VA # A
2015
Qzi.
2.619
2.0
12.9
Frazier Quarry
8067 Elkton, VA. #10
1/16
Ls.
2.621
1.9
5.8
77
8062 North
3/17
Ls.
2.675
0.7
6.1
87
8083 Timberville, VA. #10
4/17
Ls.
2.603
1.8
7.2
55
P. C. Goodloe
6019 Fredericksburg, VA
7/13
Qz
2.56
1.6
15.9
65
Hanson Aggregate
8017 Front Royal, VA
2/15
Ls.
2.73
1.0
12.9
88
Inwood Quarries,
8092 Inwood, W. VA
6/17
Ls.
2.648
1.0
7.3
81
LaFarge
7067 Frederick, MD
8/13
2.66
0.9
5.1
56
Lawhorne Bros., Lynchburg
3038 (Otter River) Rte. 24
2015
N.S.
2.58
1.6
18.9
98
Loudon Quarry
9011 Herndon, VA #10
2/16
Db.
2.95
0.5
3.7
66
Luck Stone Corp.
7052 Bealeton, VA #10
10/17
Db.
2.92
0.8
6.7
54
4001 Boscobel Manakin # B
3/17
Gn. & Gr.
2.573
0.6
8.5
90
9007 Centreville, VA #10
1/14
Db.(Tr.)
2.87
0.7
9.3
69
9010 Leesburg, VA # 10
2/16
Db.(Tr.)
2.96
0.6
5.2
52
January 2018
II-A-23
List No. 5 (cont.)
ASPHALT CONCRETE FINE AGGREGATE DATA (Cont.)
Producer and Location
Date Test
Performed
Classification
*See Legend
Dry Bulk
Specific
Gravity
Absorption
Soundness
Loss
Sand
Equivalent
Luck Stone Corp. cont.
9003 Manassas, VA #10
5/14
Db.(Tr.)
2.91
0.8
6.0
67
4045 Powhatan, VA
7/16
Am.Gn.&
Mmp.Gr.
2.69
0.8
12.9
71
4021 Richmond, VA #10
6/10
Am.-Bi.-Gn
.& Gr. Scr.
2.733
0.2
23.9
7043 Ruckersville, VA #10
4/17
Gr. & Gn.
2.79
0.5
13.2
56
7005 Shadwell, VA #10
4/17
Gs.
2.87
0.8
6.1
63
6040 Spotsylvania, VA #10
12/16
2.754
0.3
11.0
74
Martin Marietta Aggregates
4008 Doswell, VA #10
11/17
2.702
0.7
9.8
53
4054 Rockville, VA # B
7/17
2.688
0.5
6.3
87
7017 Red Hill Plant #10
7/14
Gr.
2.81
0.1
6.9
67
4046 Warbro
Road
Chesterfield, VA
6/16
Gr.& Am.Gn.
Do. Ls
2.629
1.2
2.1
74
Maymead Lime Co.
1044 Mountain City, TN
3/14
Gr.
2.675
1.2
9.3
78
Mountain Aggregates
1003 Burdine, KY
3/14
Ls.
2.591
0.8
9.3
78
Mountain Materials
1026 Dickensonville
2014
Ls.
2.655
1.1
11.9
83
1063 Elkhorn City, KY
3/14
Ls.
2.653
1.2
9.3
78
1066 Glade Spring, VA
3/14
Ls.
2.69
1.5
4.7
89
Pennsy Supply
5085 Harrisonburg, PA #10
5/13
2.75
0.6
3.3
66
Perry, Stuart M., Inc.
8020 Berryville, VA.#10
1/16
Ls.
2.855
1.0
3.2
86
8021 Winchester, VA
6/14
Ls.&Do.
2.63
1.1
5.0
89
Powell Valley Stone
1048 Dot, VA
3/14
Ls.
2.651
1.3
20.0
63
Rockydale Quarries, Corp.
3001 Appomattox,VA
2017
Ls.
2.79
0.8
2.3
98
8007 Broadway, VA
4/16
Do. & Ls.
2.714
1.3
10.6
74
7072 Charlottesville quarry #10
2/15
2.87
1.0
8.5
66
8006 Forestville, VA
5/16
Ls.
2.604
1.7
5.3
73
2015 Roanoke, VA
2016
Ls & Do
2.740
2.2
8.4
January 2018
II-A-24
8057 Staunton, VA #10
5/16
Ls.
2.653
1.9
7.6
81
List No. 5 (cont.)
ASPHALT CONCRETE FINE AGGREGATE DATA (Cont.)
Producer and Location
Date Test
Performed
Classification
*See Legend
Dry Bulk
Specific
Gravity
Absorption
Soundness
Loss
Sand
Equivalent
Rogers Group
1114 Dickensonville, VA
4/14
Ls.
2.671
1.6
18.7
45.2
Salem Stone Company
1062 Sylvatus, VA # 10
4/14
Qzi.
2.623
1.2
18.7
68
1062 Sylvatus, VA # A
2015
Qzi.
2.612
2.1
14.4
Shenandoah Stone
8076 Stuarts Draft, VA
2/15
N.S.
2.536
1.8
15.2
66
Southside Materials
3009 Danville, VA #10
2017
Gr. Gn.
2.623
0.8
18.1
83
3010 South Boston, VA 10
2017
Gr.
2.741
1.3
12.0
58
Specialty Granules
8098 Blue Ridge Summit, PA
8/17
B.
3.006
0.1
4.5
61
Vulcan Materials
4015 Dale - Chester, VA #10
5/16
Bi.Gn.&Gr.Scr
2.70
0.5
4.2
6012 Garrisonville, VA #10
11/16
2.916
0.6
9.7
98
7065 Hanover, PA #10
5/13
2.79
0.3
6.2
74
5016 Havre-de-Grace,MD#10
11/15
Di.(Tr.)
2.78
0.8
4.9
74
4016 Jack - Petersburg, VA #10
2/16
Bi.Gn.&Gr.Scr
2.542
1.3
2.9
9022 Manassas, VA #10
2/16
Db.(Tr.)
2.88
1.5
5.0
31
1093 Norton, VA #1
3/14
Ls.
2.653
1.1
8.3
91
9023 Occoquan, VA #10
1/14
Gr.& Gn
2.72
1.5
9.8
68
8071 Staunton, VA
1/17
Ls.
2.599
1.9
11.2
72
4052 Union Level, VA #10
11/15
2.633
0.5
2.1
7015 Warrenton, VA #10
2/16
Db.(Tr.)
2.87
1.3
5.1
67
W-L Construction
3035 Turbeville, VA
2016
N.S.
2.57
1.4
23.5
98
Wythe Stone Co
1082 Wytheville, VA
4/14
Ls.
2.767
0.7
3.8
89
York Building Supply
5086 York, PA
Roosevelt Quarry #10
5/13
2.77
1.0
5.1
90
January 2018
II-A-25
List No. 5 (cont.)
(5) LIGHTWEIGHT AGGREGATE DATA (Physical Lab)
Note: Lightweight aggregates must conform to section 206 of VDOT’s 2002 Road and Bridge
Specifications before used for VDOT work.
Producer and Location
Date Test
Performed
Classification
*See Legend
SSD
Specific
Gravity
Absorption
LA Abrasion Loss
Dry Bulk
Specific
Gravity
A
B
C
Carolina Stalite Co.
2070 Aquadale, NC
Sl.
1.5
5.4
27.0
Carolina Stalite Co.
2069 Gold Hill, NC
Sl.
1.50
5.4
29.7
LEGEND: Refer to following list for geological classification abbreviations used in the table above.
Am. - Amphibole
Gr. - Granite
Qz. - Quartz
Ap. - Aplite
Gs. - Greenstone
Qzi. - Quartzite
Ar. - Arch
Gvl. - Gravel
Rv. - River Sand
B. - Basalt
Ky. - Kynite
Scr. - Screenings
Bi. - Biotite
Ls. - Limestone
Sg. - Slag
Db. - Diabase
Ly - Limy
Sh. - Shale
Di. - Diorite
Ma. - Marble
Sis. - Siltstone
Do. - Dolomite
Mmp. - Metamorphosed
Sl. - Slate
Fs. - Feldspar
N.S. - Natural Sand
Ss. - Sandstone
Gn. - Gneiss
Phy. - Phyllite
Tr. - Traprock
(FT) Freeze-Thaw Method of Soundness determination
January 2018
NovemberSeptemb
er 18, 2017
II-A-26
List No. 6
(6) AGRICULTURAL LIMING MATERIALS REGISTRATION (Chemistry Lab)
A) Agricultural Liming Materials (Pulverized or Ground Limestone):
Pulverized and Ground Limestone are paid by Ton or Metric Ton
Cal Carb
Equiv %
(CCE)
Percent
Passing
20 Mesh
Screen
Percent
Passing
60 Mesh
Screen
Percent
Passing
100
Mesh
Screen
Firm Name
Product Name
Aggregates USA
Abingdon Ground Agricultural Limestone
96.00
90.00
50.00
30.00
Abingdon, VA
Appomattox Lime Company
Appomattox Lime
90.00
90.00
50.00
40.00
Appomattox, VA
Austinville Limestone Company
Austinville Ground Limestone - Bulk
94.00
90.00
50.00
35.00
Austinville, VA
Garden Lime Pulverized
99.00
95.00
80.00
70.00
Pelletized Lawn Lime
99.00
95.00
80.00
70.00
Pro Cal Pellets
96.00
95.00
80.00
70.00
Baker Lime
Bakers AG 18 Ground Damp
105.60
90.00
60.00
50.00
York, PA
Bakers Commercial Pulverized Damp
105.60
100.00
85.00
75.00
Bakers Premier Pellets
100.00
100.00
85.00
75.00
Bluegrass Materials
Cockeysville, MD
Texas AGLIME
92.50
90.00
70.00
35.00
Carmeuse Limestone, Incorporated
Winchester Calcitic Limestone
89.70
95.00
75.00
50.00
Winchester, VA
Commonwealth Industrial Services,
Larry’s Lime Pelletized
90.00
95.00
80.00
70.00
Inc.
Hopewell, VA
Crop Production Services
Pelleted Lime
90.00
98.00
98.00
42.40
Shelbyville, KY
Culpepper Farmers Coop
Ground Dolomitic Limestone
85.00
90.00
50.00
30.00
Culpepper, VA
Pulverized Calcitic Limestone
85.00
90.00
75.00
70.00
E Dillon & Company
E. Dillon & Co. Dolomite Ag-Lime
87.00
100.00
95.00
85.00
Swords Creek, VA
E. Dillon & Company Bulk Ag-Lime
87.00
90.00
50.00
30.00
Easy Gardener, Inc.
Jobe’s Organics Garden Lime
94.00
100.00
88.00
90.00
Paris, KY
Espoma Company, The
Espoma Organic Garden Lime
93.00
100.00
88.00
80.00
Millville, NJ
Frazier Quarry, Inc., The
Frazier Ag-Lime (Harrisonburg)
85.00
90.00
70.00
Harrisonburg, VA
Frazier Ag-Lime (Elkton)
90.00
90.00
50.00
30.00
January 2018
NovemberSeptemb
er 18, 2017
II-A-27
Cal Carb
Equiv %
(CCE)
Percent
Passing
20 Mesh
Screen
Percent
Passing
60 Mesh
Screen
Percent
Passing
100
Mesh
Screen
Firm Name
Product Name
Greer Lime Company
Greer Pulverized Ag-Lime
96.00
100.00
98.00
90.00
Morgantown, WV
Hyponex Corporation
Hyponex Dolomitic Ground Lawn & Garden Limestone
93.00
90.00
50.00
35.00
Marysville, OH
Hyponex Dolomitic Pelletized Lawn & Garden
Limestone
103.50
100.00
85.00
75.00
Jessee Stone Company
Woodway Calcitic Lime
85.00
90.00
50.00
30.00
Woodway, VA
Kelly Limestone, LLC
Kelly's Capsulated Dolomitic Limestone
86.00
95.00
61.00
50.00
Newark, MO
Kelly's Capsulated High Calcium Limestone
93.00
95.00
61.00
50.00
Kirby Agri Incorporated
Pelletized Dolomitic Limestone
93.00
98.00
80.00
75.00
Lancaster, PA
MC Greary Organics INC
Lancaster, PA
Hi-Cal Pulverized Lime
96.20
100.00
100.00
90.00
New Enterprise Stone & Lime Co. Inc.
New Enterprise, PA
New Enterprise #18 Magnesium Limestone
New Enterprise Ag-16 Low Moisture Damp Lime
New Enterprise Calcium Limestone
New Enterprise Magnesium Limestone
90.00
105.00
90.40
103.50
90.00
90.00
98.00
98.00
60.00
72.00
70.00
80.00
50.00
67.00
65.00
75.00
Cal Carb
Equiv %
(CCE)
Percent
Passing
20
Mesh
Screen
Percent
Passing
60 Mesh
Screen
Percent
Passing
100
Mesh
Screen
Firm Name
Product Name
Oldcastle Lawn & Garden Inc.
Cal Turf Micro
95.00
100.00
80.00
70.00
Atlanta, GA
Cal Turf Pro
95.80
100.00
80.00
70.00
Calcitic Micro Pellets
95.80
100.00
85.00
82.00
Calcitic Pro Pellets
97.10
100.00
88.00
80.00
Calcitic Pro Pellets (2)
95.80
100.00
88.00
80.00
Calitic Pro Pulverized (2)
99.60
100.00
86.00
80.00
Dolomitic Pro Pellets
90.00
90.00
50.00
40.00
Mag Turf Micro-cas (D)
102.00
100.00
80.00
70.00
Mag Turf Pro (D)
102.90
100.00
88.00
80.00
Mag Turf Pro (2)-lee (D)
95.00
99.00
70.00
50.00
Micro Select Dolomitic Pellets
96.90
99.00
85.00
75.00
Micro Select Pellets (1)- calcitic-tho (C)
97.00
100.00
85.00
82.00
Micro Select Pellets (2)-dolomitic-cas (D)
98.70
99.00
70.00
50.00
Micro Select Pellets (3)-dolomitic-lee (D)
100.00
100.00
88.00
80.00
Pro Granular
96.00
92.00
50.00
40.00
Pro Granular Dolomitic
95.00
95.00
50.00
35.00
Pro Pellets Dolomitic Limestone- buc (D)
94.20
95.00
70.00
50.00
Pro Pulverized (1) -dolomitic-tho (D)
95.00
100.00
88.00
80.00
January 2018
NovemberSeptemb
er 18, 2017
II-A-28
Cal Carb
Equiv %
(CCE)
Percent
Passing
20
Mesh
Screen
Percent
Passing
60 Mesh
Screen
Percent
Passing
100
Mesh
Screen
Firm Name
Product
Name
Oldcastle Lawn & Garden Inc.
Atlanta, GA
Pro Pulverized Dolomitic (D)
102.90
100.00
88.00
80.00
Pro Select Dolomitic Pellets
102.90
100.00
88.00
80.00
Pro Select Dolomitic Pellets
96.90
99.00
85.00
75.00
Pro Select Pellets (1)-cht-calcitic (C)
94.00
100.00
90.00
86.00
Pro Select Pellets (2)-cas- dolomitic (D)
99.70
99.00
70.00
50.00
Pro Select Pellets (3) -dolomitic-lee (D)
98.30
100.00
88.00
80.00
Pro Select Pellets (4) -dolomitic-tho (D)
102.00
98.00
72.00
54.00
SD EZ Spread Granular Cal
96.00
92.00
50.00
40.00
SD Pelletized Lawnlime Dol-lee (D)
95.00
99.00
70.00
50.00
Soil Doctor EZ Spread Granular
95.00
95.00
50.00
33.00
Soil Doctor Gardenlime -calcitic-tho (C)
99.60
100.00
88.00
80.00
Soil Doctor Gardenlime (D)-lee
95.00
98.00
72.00
54.00
Soil Doctor GardenLime- Dolomitic
102.90
100.00
88.00
80.00
Soil Doctor Gardenlime- Dolomitic
96.90
99.00
85.00
75.00
Soil Doctor Gardenlime (2) dolomitic-buc (D)
94.20
95.00
72.00
54.00
Soil Doctor Gardenlime (4) (D)
90.00
90.00
50.00
40.00
Soil Doctor Gardenlime (D)-lee (D)
95.00
95.00
100.00
88.00
80.00
Soil Doctor Lawnlime (1) dolomitic-buc (D)
94.20
95.00
70.00
50.00
Soil Doctor Lawnlime (2) dolomitic-cas (D)
99.70
99.00
70.00
50.00
Soil Doctor Lawnlime (3) -cht (C)
97.80
100.00
88.00
80.00
Soil Doctor Lawnlime (4) -calcitic-tho (C)
97.90
100.00
88.00
80.00
Soil Doctor Lawnlime (5) -calcitic-car (C)
92.00
95.00
85.00
70.00
Soil Doctor Lawnlime (6) (D)
90.00
90.00
50.00
40.00
Soil Doctor Lawnlime Calcitic (C)
95.80
100.00
88.00
80.00
Soil Doctor Lawnlime- Dolomitic (D)
102.90
100.00
88.00
80.00
Soil Doctor Lawnlime- Dolomitic
96.90
99.00
85.00
75.00
Soil Doctor Pulverized Gardenlime-calcitic-cht(C)
(C) (C)
96.90
100.00
88.00
80.00
Rockydale Quarries
Ground Agri. Dolomitic Limestone - Bagged
94.00
90.00
50.00
35.00
Linville & Roanoke VA
Ground Dolomitic Agri. Limestone - Bulk
94.00
90.00
50.00
35.00
January 2018
NovemberSeptemb
er 18, 2017
II-A-29
Cal
Carb
Equiv
%
(CCE)
Percent
Passing
20 Mesh
Screen
Percent
Passing
60 Mesh
Screen
Percent
Passing
100 Mesh
Screen
Firm Name
Product Name
Salem Stone Corporation
ACCO Ground Limestone
85.00
90.00
50.00
35.00
Blacksburg, VA
Sisson & Ryan Quarry, LLC
Sisson & Ryan Agri. Ground Limestone - Bulk
85.00
90.00
65.00
50.00
Shawsville, VA
Southern States Cooperative
Southern States Calcitic Pelleted Limestone
91.00
100.00
88.00
88.00
Richmond, VA
Southern States Dolomitic Pelleted Limestone (A)
95.00
95.00
72.00
54.00
Southern States Dolomitic Pelleted Limestone (C)
97.60
100.00
88.00
80.00
Staunton Lime Company
Staunton Ground Agricultural Lime
98.00
90.00
50.00
30.00
Staunton, VA
Stuart M Perry Inc.
Agricultural Pelletized Limestone
90.00
95.00
60.00
60.00
Winchester, VA
High Mag Ground Limestone
90.00
95.00
80.00
70.00
Pulverized Limestone
85.00
100.00
96.00
87.00
Tennessee Valley Resources
Young Mine New Market TN Dolomite AG Lime
95.00
90.00
50.00
35.00
Jefferson City, TN
Turf Care Supply Corp
AMpxc Calcitic Limestone
90.00
99.90
85.00
82.00
TCS Cal-Star Limestone
90.00
99.90
85.00
82.00
Vulcan Construction Materials, LP.
Hanover Agri Lime
98.00
95.00
90.00
75.00
Hanover, PA
Hanover Agri-Cal Lime
93.00
95.00
90.00
75.00
Waukesha Lime & Stone
Waukesha Farm & Lawn Lime
102.00
90.00
60.00
50.00
Waukesha, WI
Winston Weaver Company Inc.
Weaver’s Pellet Lawnlime (D)
97.60
100.00
88.00
80.00
Winston Salem, NC
January 2018
NovemberSeptemb
er 18, 2017
II-A-30
B) Hydrated Lime
Cal
Carb
Equiv
%
(CCE)
Percent
Passing
20
Screen
Percent
Passing
60
Screen
Percent
Passing
100
Screen
Firm Name
Product Name
A. H. Hoffman Incorporated
Hoffman Horticultural Lime
128.00
99.90
99.70
99.00
Lancaster, NY
Greer Lime Company
Greer Hydrated Lime
125.00
100.00
100.00
98.00
Morgantown, WV
Lhoist North America
Chemical Hydrated Lime
128.00
100.00
98.00
93.00
of Virginia, Inc.
Ripplemead, VA
Oldcastle Lawn & Garden
Lee Double Strength Hydrate
137.00
99.00
96.00
95.00
Atlanta, GA
Soil Doctor Hydrated
148.00
100.00
99.00
97.00
January 2018
NovemberSeptemb
er 18, 2017
II-A-31
C) Industrial Co-Product (Substandard Liming Materials)
Cal Carb
Equiv %
(CCE)
Percent
Passing
20 Screen
Percent
Passing
60
Screen
Percent
Passing
100
Screen
Firm Name
Product Name
Baker Lime
Bakers AG 10 Bulk
105.60
50.00
40.00
28.00
Dominion
Virginia Electric and Power Co
Wood Ash (Hopewell Location)
67.00
97.00
93.00
90.00
Glen Allen, VA
Wood Ash (Southampton Location)
67.00
97.00
93.00
90.00
Wood Ash (Altavista Location)
67.00
97.00
93.00
90.00
Georgia Pacific LLC
BPB Fly Ash
63.36
99.98
99.90
99.80
Gladys, VA
GPB Bottom Ash
12.02
98.22
93.87
87.80
Greif Packaging LLC
Riverville, VA
Greifwood Ash Substandard Liming Material
50.00
76.00
63.00
51.00
Montgomery Farm Supply
Cal-Plus
80.00
60.00
40.00
34.00
Wirtz, VA
New Enterprise Stone & Lime Co. Inc
New Enterprise, PA
New Enterprise #18 Calcium Limestone
90.40
70.00
60.00
50.00
Oldcastle Lawn & Garden
Atlanta, GA
Pro Pulverized (2) -dolomitic-lee (D)
103.00
99.00
72.00
54.00
WestRock CP LLC (formerly
RockRockTenn
Dregs
98.30
97.40
97.20
97.00
named Rock Tenn)
Dry Lime After Kiln
125.00
98.50
97.00
96.60
West Point, VA
Grits
98.30
69.50
41.30
30.40
Mixed Dry Lime and Grits
105.00
93.40
72.80
66.30
Post-belt Press Lime Mud
94.70
99.90
99.80
99.50
South Boston Energy LLC
Cycleright
68.00
99.00
97.00
86.00
South Boston, VA
Upper Occoquan Sewage Authority
UOSA Lime Solids
86.60
99.90
99.40
98.50
Centreville, VA
January 2018
NovemberSeptemb
er 18, 2017
II-A-32
D) Fast Acting Lime 2016 Road and Bridge Specification 244.02 (e) 2
Fast acting lime is a highly processed grade of agricultural lime that has a higher percentage by weight
of material passing the U.S. Standard 100 Sieve. Fast acting lime can be supplied in liquid or dry
form. The minimum calcium carbonate equivalent (CCE) for fast acting lime shall be as follows:
Physical Form
Minimum CCE %
Liquid
55%
Dry
85 %
Cal
Carb
Equiv
%
(CCE)
Percent
Passing
20 Screen
Percent
Passing
60
Screen
Percent
Passing
100
Screen
Firm Name
Product
Name
Aqua-Aid, Inc.
Verde-Cal
91.00
100.00
98.00
95.00
Rocky Mount, NC
Verde-Lawn
91.00
100.00
98.00
95.00
Verda Lawn Hydro
91.00
100.00
98.00
95.00
Austinville Limestone Company
Lime Lite Fast Acting Pelletized Lime
99.00
100.00
98.00
95.00
Austinville, VA
LimeLite Pro Cal
96.00
100.00
98.00
95.00
Bailey Nurseries Inc.
Color Me Pink Pelletized Lime
90.41
99.00
99.00
95.00
St. Paul, MN
Bonide Products Incorporate
Bonide Dura Turf Turbo High Efficiency Lime
91.00
100.00
95.00
95.00
Oriskany, NY
Burnett Athletics, Inc.
Cal Flo Liquid Limestone
64.17
100.00
100.00
100.00
Copobello, SC
Calcium Products Incorporated
Supercal 98G Pelletized Limestone
95.00
100.00
99.00
95.00
Gilmore City, IA
Supercal 98MG Greens Grade Limestone
95.00
100.00
99.00
95.00
Carolina Precision Fibers Incorporated
Ronda, NC
EZ Lime Liquid Plus
64.81
100.00
100.00
100.00
Cleary Chemicals, LLC
Limestone F Liquid
56.49
100.00
100.00
100.00
Dayton, NJ
Encap, LLC
Fast Acting Lime Plus AST
92.50
100.00
93.00
93.00
Greenbay, WI
Fast Acting Lime
94.00
99.00
85.00
70.00
Espoma Company, The
Espoma Organic Lightning Lime
91.00
100.00
95.00
95.00
Millville, NJ
Hawthorne Gardening Company, The
Port Washington, NY
Whitney Farms Pelleted Dolomitic Lime
98.27
100.00
96.90
94.80
Lesco INC
Cleveland, OH
Lesco Liquid Lime (190993)
64.17
100.00
100.00
100.00
Novelty Manufacturing Co
Earthbox All Natural Dolomite
98.10
100.00
98.00
93.00
Lancaster, PA
Oldcastle Lawn & Garden
Green N Grow Fast Acting Lime (New) Calcitic
97.00
100.00
85.00
82.00
Atlanta, GA
Green N Grow Fast Acting Lime (New) Dolomitic
97.00
100.00
85.00
82.00
Jolly Gardener Fast Acting Lime (Calcitic New) (1)
97.00
100.00
85.00
82.00
Jolly Gardener Fast Acting Lime
97.00
100.00
85.00
82.00
Plant Food Company Inc.
PFC’s Phusion Calcitic Limestone
88.73
100.00
95.00
93.00
Cranbury, NJ
PLANT'S CHOICE INC
Plant's Choice Rapid Lime Enhanced Calcitic Lime
91.00
100.00
95.00
95.00
West Wareham, MA
Profile Products, LLC.
ProPlus NeutraLime Liquid
73.00
100.00
100.00
100.00
January 2018
NovemberSeptemb
er 18, 2017
II-A-33
Buffalo Grove, IL
ProPlus NeutraLime Dry
97.00
100.00
99.50
96.00
January 2018
II-A-34
D) Fast Acting Lime
Cal
Carb
Equiv
%
(CCE)
Percent
Passing
20 Mesh
Screen
Percent
Passing
60 Mesh
Screen
Percent
Passing
100 Mesh
Screen
Firm
Name
Product Name
Solu-Cal USA LTD
Hydro-Cal Dry
94.5
100.00
100.00
100.00
West Wareham, MA
Solu-Cal Enhanced Calcitic Lime
91.00
100.00
95.00
95.00
Solu-Cal with Cavalcade 0.37%
91.00
100.00
95.00
95.00
Harrell’s CalMax
91.00
100.00
95.00
95.00
Sta-Green Rapid-Lime with Soluble Calcium
96.60
100.00
95.00
95.00
Southern States Cooperative
Solu-Lime
91.00
100.00
95.00
95.00
Richmond, VA
Turf Care Supply Corp
Landscapers Select Rapid Release Lime
90.00
100.00
85.00
70.00
Brunswick. OH
Landscapers Select Rapid Release Lime W/AMP-XC
90.00
100.00
85.00
70.00
E) Soil Amendments
Cal
Carb
Equiv
%
(CCE)
Percent
Passing
20 Screen
Percent
Passing
60
Screen
Percent
Passing
100
Screen
Firm Name
Product Name
AMSOL Incorporated
Superior, Wi
AG Grand Liquid Lime
25.00
100.00
100.00
100.00
Growmark Inc
Le Mars, IA
Greenyard Crabgrass Preventer
with 0.125% Dimersion
81.73
100.00
95.00
Central Garden & Pet Garden
Division
Pennington Fast Acting Lime Plus AST
90.00
90.00
50.00
40.00
Atlanta, GA
January 2018
II-A-35
List No. 7
(7) ANTISTRIPPING ADDITIVES (Asphalt Lab)
Following is a list of approved Anti-stripping Additives:
Manufacturer
Brand Names
Notes
Akzo Nobel Surface Chem., LLC
7101 Adams St. Unit No. 7
Willowbrook, IL 60521
Kling Beta LV
100% Active
Kling Beta LV-(HM)
100% Active
Kling Beta2550-(HM)
100% Active
Kling Beta 2600
100% Active
Kling Beta 2700
100% Active
Kling Beta 2912
100% Active
Kling Beta 3024
100% Active
Perma Tac Plus
100% Active
Rediset LQ 1102C
100% Active
Rediset LQ 1200
100% Active
Wetfix 312
100% Active
Armak Chemicals Division
Chicago, Illinois
Redicote 82-S
100% Active
ARR-MAZ Products
Winter Haven, Florida
Ad-here HP Plus
100% Active
Ad-here 65-00
100% Active
Ad-here LOF 6500 LS
100% Active
Ad-here 66-01
100% Active
Ad-here 62-40
100% Active
Ad-here (Regular)
100% Active
ACRA-2000
100% Active
SC-AT-50
100% Active
Ad-here 6265-1
100% Active
Adhere 77-00
100% Active
Adhere 65-50
Cargill Industrial Specialties
13400 15th Ave N
Suite B MS 103
Plymouth, MN 55441
ANOVA 1510
Chemoran Oranmore
Galway, Ireland
TPH
100% Active
Exxon Chemical Americas
Tomah Products
Milton, Wisconsin
ACRA-1000
100% Active
ACRA-3000
100% Active
ACRA-5000
100% Active
ACRA-5092
100% Active
ACRA-600L
100% Active
No Strip Super
Concentrate
90% Active
101-25B
100% Active
101-25D
100% Active
101-25E
100% Active
January 2018
II-A-36
Innophos
259 Prospect Plains Road
Cranbury, NJ 08512
Innovalt W
100% Active
List No. 7 (cont.)
Manufacturer
Brand Names
Notes
Road Science, Division of ArrMaz
6502 South Yale Avenue
Tulsa, OK 74136
Kohere AS-500
100% Active
Kohere AS-700
100% Active
Kohere AS-1000
100% Active
Kohere AT-1000
100% Active
Ingevity
North Charleston, SC
Evotherm J1
Evotherm M1
Evotherm U3
Morlife 3300
100% Active
MorLife4400
Morlife 5000
Pave Bond T-Lite
100% Active
Pave Bond LITE
100% Active
Pre Tech Industries
Dearborn Brook Circle
Exter, NH 03833
Pavegrip 250 G
Pavegrip 275
100% Active
Pavegrip 350
Pavegrip 400
100% Active
Pavegrip AA-2
Pavegrip 550
Seaboard Asphalt Products Co.
Super Bond 96
100% Active
SouthEastern Chemical Corp.
P.O. Box 917
932 East Elm St.
Graham, NC 27253
Aggrebond 275
100% Active
TAPCO, Inc.
Greensboro, North Carolina
TAPCO 206
60% Active
Unichem International
Santa Fe, TX
8162
100% Active
Unique Paving Materials
3993 E. 93rd Street
Cleveland, Ohio 44105-4096
HPM
Westvaco Corp.
Chemical Division
Charleston Heights, South Carolina
Indulin AS-1
100% Active
Indulin AS-Special
100% Active
PC-705
100% Active
January 2018
II-A-37
Zydex Industries
Plymouth, MA 02360
Zycotherm
*Minimum dosage rate of 0.03%
Zycotherm EZ
*Minimum dosage rate of 0.03%
Zycoherm SP
*Minimum dosage rate of 0.03%
The quantity of Anti-stripping Additive used will be checked in accordance with VTM-13.
January 2018
II-A-38
List No. 8
(8) ASPHALT RELEASE AGENTS (Asphalt Lab)
The following list of asphalt release agents is approved; however, they shall be diluted as recommended by the
Manufacturer, and approved by the Department. The dilution recommendation shall be shown on a label attached
to the Release Agent container. The dilution rates listed below are the maximums currently approved by the
VDOT.
Manufacturer
Brand Names
Dilution Rate
Agent:Water
Foaming (F)
/Non-Foaming (NF)
Alzo, Inc.
RELEEZ
1: 30
NF
ARR-MAZ Products
ARR-MAZ TBRA #7191
1: 40
F
Arrow Magnolia Int’l.
Slick II
1:20
F
Super Slick
1:20
NF
Bowser-Morner Inc.
Econopave 1000
8:1
NF
Breakaway Advanced
Maintenance Mates
1:20
F
Bio-Clean Ind.
Bio-Clean
1:30
Capital Janitorial Supply
Colonial Blue Blaze
1: 20
F
Capitol Supply Co.
Rapid Release
1:15
Certified Laboratories
Citrus Claw
Not diluted
Chem-Tech Solutions, Inc.
Westech CT-1440
1:15
The ChemMark Corp.
Thermal-Slide
Not diluted
F
Chemstar Chemical
Chemsolve L-40
1:100
ChemStation of Virginia
3917
1:20
2159
1:20
2620
1:20
2791
5:1
2406
1:20
2061-A
1:5
8194
1:5
8442
1:5
Chemical Technologies, LLC
PM-25
1:30
ChemTek Inc.
Aqua Slip 30
1:30
F
Aqua Slip
1:15
CleanEdge, formerly ChemStation
CleanEdge 2217
6:1
1475
1:20
HD-5565
1:27
F
6992
1:40
Cleaning Systems, Inc.
Slide
1:30
Asphalt Release
1:10
Compound Technologies
BMF
1:18
F
SPX-7
1:5
F
No.1 Asphalt Release Agent
1:5
D&A, Inc.
L-Slip
1: 100
F
SP-Slip
3:100
SMA-Slip
1: 100
F
SB-Slip
1: 25
F
V-Slip
1:33
F
Slippery-Slope
3:100
F
Drummand American
Slip N Slide DL 3510
1:12
F
Dubois Chemicals
Diver-Slip
20:1
F
January 2018
II-A-39
List No. 8 (Cont.)
Manufacturer
Brand Names
Dilution Rate
Agent:Water
Foaming (F)
/Non-Foaming (NF)
Diversey Corp./ DuBois Chemicals
Liqui-Slip
1: 19
F
PolySlip
1: 30
F
Slide-Eze
1: 30
F
Slide-All
1:33
F
EDCO Mfg, Inc.
EDCO Asphalt Release
1: 10
F
Empire Services
Empire 2000 Phalt Free
1:30
Empire Slide Plus
1:30
Engineering Chemistry Co.
Slip & Slide
1:100
F
Slip & Slide H.D.
3:100
F
Slip & Slide VOB
3:100
NF
Express Chemical Co.
Citra Slip
1:40
Fine Organics Corp
FO Release
3:100
F
FO Release II
3:100
F
Forcon Chemical Corp.
Super Slick
1:35
F
Super “Release” All
1: 35
F
Foster and Company, Inc.
No Stick I
1: 10
NF
No Stick II
1: 10
NF
Global Barrier Services
Slipcoat-IRC
1:20
NF
Handi-Clean Prod. Inc.
Super Slide
1:15
Hydro-Chem Systems, Inc.
Slide Out
10:1
Industrial Water Group
No-Phalt Release
1:40
F
No-Phalt Equipment
1:60
F
Industrial Controls
Synthetic Release
1:25
JJC Materials
570156
1:30
KT Chemicals, Inc.
BioSlick-ClearRelease
Not diluted
Popcorn Buster
Not diluted
L & F Products
Professional NL Concentrate
All Purpose Cleaner
Formula 177-62
1:32
F
Lawrence Sanitary Co. Chem Station
5895
1;20
F
1475
1:20
F
6996
1:10
NF
6992
1:40
NF
Maxco Supply Co.
Max Slide
1:20
F
Meyer Laboratory
Avalanche
1:5
F
Slider
1:10
UltraSlider
1:20
MEPCO, Inc.
Mepcoat 103
1: 48
NF
Mid-Atlantic II
HD5510
1:20
Momar Incorporated
TM-08-024 SS Mold-Cote NS-
20
1:40
Morton International
Mor-Release VL
1:40
NF
NCC, Inc.
NCC-60 (Release Foam)
1: 30
F
Release Plus
1: 40
NF
Super Foam - SF - 92
1: 35
F
Phalt Free
1: 35
New Dawn Manufacturing
ESE-100
1:31
New Life Chemical Equip.
Quick Slick
1:50
Petroferm Inc.
PFC 265-13
1:40
January 2018
II-A-40
List No. 8 (Cont.)
Manufacturer
Brand Names
Dilution Rate
Agent:Water
Foaming (F)
/Non-Foaming
(NF)
Power Kleen
0268 Economy Asphalt Release
1:17
F
8596 Soap Asphalt Release
1:35
F
Presto Chemical Co.
Bio-Kream
1: 38
NF
Kwik Release
1: 40
F
E-Z Slip
1: 35
NF
Syn-Coat
1: 40
Pro Chem, Inc
Release
1:15
Puritan/Churchill Chemical Co.
Churchill L 901
1:40
F
Qualichem
Formula 5110
3:100
NF
Formula 5111
1:100
F
Formula 5119
3:100
F
Q-Slide 554
1:5
S-Slide 766
Q-Slide 559
Rhomar Industries, Inc.
Enviro-slide
1: 3
Rochester Midland Corp.
Slipeazee
3: 100
NF
Slipeazee SB
1: 30
F
Slipeazee Natural
1: 20
Slipeazee Satin
1: 10
Slipeazee 2000
1: 30
Roxxon Corp.
Rox-Release
2.5:100
F
EzeSlip
1:10
F
Safety First Chemicals
Safety Slide
1: 30
F
Schaeffer Mfg. Co.
#4002 Bed Release Agent
1:30
NF
Schneid, Inc.
Release
1:15
F
Secco
EZE
1:30
F
Space Chemical, Inc.
AI-6235
1:5
NF
Spartan Chem. Co. Inc.
Spartan SD-20 Cleaner
1:30
F
Stop Stix Incorporated
StopStix
1:20
Sun Coast Supply Corp.
Harvey’s Power Grease & Tar
Cutter
1:25
F
Tec-Team Industries, Inc.
TECLON-50
1:37
NF
Teclon-Pro
1:5
Texo Corporation
TEXOPE 515
1:30
F
TPC Team Ind. Inc.
Mega-Ton
1:53
Tri-State Equip. Sales
I-So-Slick
1: 40
U.S. Pro-Tec, Inc.
ECO-1000
1:20
F
Vibrant Products Unltd. Corp.
Envirofoam
1: 30
F
Super Slick
1: 30
NF
West River Products, LLC
Power Plus
1:10
F
Zep Manufacturing
EZ008
1:10
NF
E2008
1:1
R-6690
1:55
Zep Formula 4358
1:459
F
Zep Pinnacle
1:15
NF
Zep X-509 ( formerly No.1
Asphalt Release Agent)
1:5
June 2012
II-A-41
List No. 9
(9) APPROVED ELECTRODE AND FLUX-ELECTRODE COMBINATIONS (Structures)
Any electrode or flux-electrode combination which appears on the approved list may be accepted without
evidence of test or certification. The electrodes are to be used in the welding of the following ASTM steel
base metals: A709, Gr.36, Gr. 50, Gr. 100, Gr. 50W, 70W, and 100W.
If the Fabricator or Contractor desires to use any electrode or flux-electrode combination which is not on the
approved list, he may do so, providing he submits certified copies of test reports of all pertinent required tests
of the American Welding Society made on electrodes and flux-electrode combinations of the same class, size
and brand, and which were manufactured by the same process and with the same materials as the brands
being furnished.
*E6010 and E6011 rods may only be used for miscellaneous welding (piling, forms, railing, etc.).
**F6A2, F6A4, or F6A6 may only be used to weld A36 steel.
FILLER METAL FOR M270M (M270) A709M (A709) GR. 36, 50, 100
AND PAINTED GR. 50W AND 100W STEEL
MANUFACTURER
TRADE NAME
AWS
CLASSIFICATION
AWS
SPECIFICATION
The ESAB Group, Inc.
ATOM Arc 7018-1
E7018-1 H4-R
A5.1
ATOM Arc 7018
E7018 H4-R
A5.1
Core Weld C6
E70C-6M
A5.18
Dual Shield 7100 Ultra
E71T-M/T-12M
A5.20
Dual Shield R-70 Ultra
E70T-1CH8/T-1M1
T-9CH8/T-9M
A5.20
ATOM Arc Acclaim
E7018 H4R
A5.1
Hobart Brothers, Co.
Hobart 335A
E6011
A5.1
Hobart 335C
E6011
A5.1
Quantum ARC 6
ER70S-6
A5.18
Fabco RXR
E70T-1/9C, T55-2 T-11C,
AH10
A5.20
Fabco TR70
E70T-1 CH8, E70T-9 CH8
A5.20
EXCEL-ARC 71
E71T-1C/M, , E71T-9C/M T46-
3 PC/M2 H10
A5.20
Formula XL550
E71T-1C, E71T-12 C,JH8
A5.20
TM71
E71T-1C,E71T-12,CJH8
TM 771
E 71T-1C, E71T-12 CJH8
A5.20
TM 95K
E90T5-K2CH4, E90T5-K2M-
H4
A5.29
The Lincoln Electric, Co.
Easy-Arc 6011C
E 6011
A5.1
Easy-Arc 7018MR
E7018-H4R, E7018
A5.1
Excalibur 7018 MR
E7018-H4-R
A5.1
Fleetweld 5P
E6010
A5.1
Fleetweld 5P+
E6010
A5.1
Jet LH 78 MR
E7018-H4R, E7018
A5.1
Jetweld LH-70
E7018-H4R, E7018
A5.1
Lincolnweld 761(761-Pipe)
Flux/L-61 Electrode
F7A2-EM12K-H8
A5.17
June 2012
II-A-42
List No. 9 (Cont.)
MANUFACTURER
TRADE NAME
AWS
CLASSIFICATION
AWS
SPECIFICATION
The Lincoln Electric, Co.
(Cont’d)
Lincolnweld 780 Flux/L61
Electrode
F7A2 EM12K-H8)
A5.17
Lincolnweld 960 Flux/L61
Electrode
F7A2-EM12K-H8
A5.17
Metalshield MC-710XL
E70C6M-H8, E70C-G-H8
A5.18
Outershield 70
E70T-1 CH16, E70T-9C H16
A5.20
Outershield 71M
E71T-1C, E71T-H16
A5.20
Super Arc L-50 Electrode
ER70S3
A5.18
Superarc L-56 Electrode
ER70S6
A5.18
Ultracore 71A85
E71T-1MH8, E71T-9MH8
A.520
Ultracore 71C
E71T-1CH8, E71T-9CH8
A.520
Murex Welding Products
Murex 6011C
E6011
A5.1
Murex 7018MR
E7018-H4-R, E7018
A5.1
Select Arc, Inc.
Select 70C-3
E70C-3M
A5.18
Select 70C-6 (75AR/25C02)
E70C-6M
A5.18
Select 70C-6 (90AR/10C02)
E70C-6M
A5.18
Select 70C-6 LS (75AR/25
C02)
E70C-6M
A5.18
Select 70C-6 LS
(90AR/10C02)
E70C-6M
A5.18
Select 70 C-T
E70C-6M
A5.18
Select ER705-3
ER705-3
A5.18
Select ER705-6
ER705-6
A5.18
Select 71
E70T-1C,T-9C
A5.20
Select 97
E70T-1C,T-9C
A5.20
Select 70TR
E70T-1C,T-9C
A5.20
Select 720HP
E71T-12MJ
A5.20
Select 720
E71T-1M,T-1MJ, T-9M, T-9MJ
A5.20
Select 720
E71T-1C, T-1CJ, T-9C,T-
9CJ,T-12C,T-12CJ
A5.20
Select 727
E71T-1M, T-1MJ, T-9M, T-
9MJ
A5.20
Select 727
E71T-1C, T-1CJ, T-9C, T-9CJ,
T-12CT-12CJ
A5.20
Encore
E71T-IM,T-9M
A5.20
Encore
E71T-1C, T-9C
A5.20
June 2012
II-A-43
List No. 9 (Cont.)
FILLER METAL FOR EXPOSED BARE APPLICATION OF
M270M (M270) A709M (A709) GR 345W (50W) STEEL
MANUFACTURER
TRADE NAME
AWS
CLASSIFICATION
AWS
SPECIFICATION
ESAB Welding &
Cutting Products
ATOM Arc 8018
E8018-C3 H4-R
A5.5
ATOM Arc 9018
E9018-MH4R
Dualshield 8100-W
E81T1-W2C/W2M
A5.29
Lincoln Electric Co.
AXXX 10 Flux/L61 Electrode
F7A4-EM12K-
Nil -H8
A5.23
Excalibur 8018-C3 MR
E8018-C3 H4R
A5.5
Lincolnweld 860 Flux/LA-75
Electrode
F7A2-ENi 1K-Ni1-H8
A5.23
Lincolnweld 960 Flux/LA-75
Electrode
F8A2-ENi1 K-Ni1-H8
A5.23
UltraCore 81Ni1A75-H
E81T1-Ni1MJH4
A5.29
UltraCore 81Ni1C-H
E81T1-Ni1C-JH4
A5.29
Select Arc, Inc.
Select 810-Nil
E8171-NiMJ
A5.29
Select 810-Nil
E81T1-Ni1CT
A5.29
Select 810-Ni2
E81T1-Ni2M
A5.29
Select 810-Ni2
E81T1-Ni2C
A5.29
Select 810-W
E81T1-W2M
A5.29
Select 810-W
E81T1-W2C
A5.29
Select 820-Ni1
E81T1-Ni1MJ
A5.29
Select 820-Ni1
E81T1-Ni1CJ
A5.29
Select 920-Ni1
E91T1-6C
A5.23
Select ENi15 (Lincoln 960
Flux)
ECNi1
A5.23
FILLER METAL FOR HIGH PERFORMANCE STEEL
HPS 70 W (HPS 485 W) STEEL ONLY
MANUFACTURER
TRADE NAME
AWS
CLASSIFICATION
AWS
SPECIFICATION
ESAB Welding &
Cutting Products
Atom Arc 8018
E8018-C3 H4-R
A5.5
Dualshield 8100-W
E81T1-W2C/WM
A5.29
Hobart Brothers
(Trimark)
TM 771
E 71T-1C, E71T-12CJH8
A5.20
Lincoln Electric, Co.
Excalibur 8018-C3 MR
E8018-C3 H4R
A5.5
Excalibur 9018 M MR
E9018 H4-R,
E9018 M
A5.5
Lincolnweld Mil 800
HPNi1 Flux/LA-85 Electrode
F9A4-ENi5-G-H2
A5.23
June 2008
II-A-44
List No. 10
(10) POWDERED EPOXY REBAR COATINGS (Physical Lab)
The following epoxy coatings for reinforcing steel are approved:
Aervoe-Pacific Co., Inc.
Gardnerville, Nevada
Aervoe 156 Green Rebar
AKZO Powder Coatings
Resicoat 500607
Resicoat 500620*
Resicoat RB-600 (HKF30R)
Interpon HD-34
Green HR046G
Green HK007U
Valspar
North Kansas City, MO
720-A-009 Greenbar
Dupont Powder Coating Houston, TX
Nap-Gard 7-2719
Nap-Gard 7-2709
3-M Co., St. Paul, MN
ScotchKote 413
*When applied to blasted and chromate pretreated steel.
**Limited approval for use only on wire mesh and post fabricated reinforcing steel
May 2016
II-A-45
List No. 11
(11) FIBER MULCH, WOOD CELLULOSE - ANNUAL CHECK
- (Landscape Development)
The following fiber mulches are currently approved and may be accepted on visual inspection:
Product
Manufacturer
Phone Number
Mulch&Grow 70/30 Wood Blend
Mulch&Grow Premium Cellulose
Carolina Precision Fibers, Inc.
P.O. Box 624
Elkin, NC 28621
(866) 476-3278
PFM
Wood Fiber
Wood Fiber Blend
Profile Products LLC
Sandra House
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
shouse@profileproducts.com
(800) 508-8681
HY-C1
East Coast Erosion Blankts, LLC
443 Bricker Road
Bernville, PA 19506
(610) 488-8496
Mat Blend
Mat Fiber
Matt Norwood LLC
P.O. Box 578
747 Harrisburg Drive SW
Lenoir, NC 28645
Attn: Mr. Jim Sandherr
(828) 758-4463
GeoSkin Hydraulic Mulch
Mulch and Seed Innovations, LLC
7265 Alabama Hwy 9 South
Centre, AL 35960
(256) 927 - 8823
1000
2000
Enviro-Blend
Profile Products
P.O. Box 652
219 Simpson Street
Conover, NC 28613
(828) 327-4165
Country Boy
Conwed Cellulose
Hydro Spray
Terra Mulch
Soil Cover
Profile Products
60 Dave Crockett Road
Limestone, TN 37681
Attn: Mr. Gary Bower
(423) 257-2051
SoilCover Wood
SoilCover Wood wTack
SoilCover Blend
TerraWood
TerraWood wTack
TerraBlend with UltraGro
Seed Aide-CoverGrow
Profile Products LLC
750 Lake Cook Road Suite 440
Buffalo Grove, Il 60089
Attn: Sandra Portrait-House
(800) 508-8681
Fiber mulches will be accepted only if bagged and shipped from the locations listed above.
February 2017
II-A-46
List No. 12
(12) CERTIFICATE OF COMPLIANCE AND GUARANTEE - GUARDRAIL MATERIALS
(Structures)
In accordance with Sec. 204.18 herein, the following guardrail Erectors have submitted annual certificates of
compliance and guarantee:
A&P Services, LLC
DBi Services, LLC (DBiS)
DeAngelo Brothers, LLC (DBi)
Curtis Contracting
Guardrail of Roanoke Inc.
Long Fence
Makco, Inc.
Nickelston Industries, Inc.
Penn Line Services, Inc.
Roadway Construction Products, Inc
Guardrails, Etc., Inc. (Maryland)
Webster and Webster
Interstate Specialties Services
L.S. Lee, Inc.
Curtis Contracting
Nationwide Construction Group
The following guardrail Manufacturers have submitted annual certificates of compliance and guarantee:
Brifen USA
Elderlee, Inc.
Gregory Highway Products
Highway Safety Corp.
R. G. Steel Corp
SPIG
Trinity Highway Products
(*P)=Probationary
These certificates have been reviewed and are on file at the office of the State Materials Engineer. For the
period January 1, 2017 through December 31, 2017, steel material supplied by the above companies is to be
accepted by visual inspection.
Guardrail end treatments must be crash tested in accordance with NCHRP 350 criteria. The Special design
Group in Central office Location & Design Division maintains a NCHRP 350 product list at the following
website:
http://www.virginiadot.org/business/locdes/nchrp350-index.asp
July 2015
II-A-47
List No. 13
QUALIFIED LOW VOLATILE ORGANIC COMPOUND
(13) ZINC RICH PAINT SYSTEMS LIST (Chemistry Lab)
(SYSTEM B)
Note: Effective with the March 2005 advertisement, all approved paint systems must not exceed the
2.8 lb/gal/ VOC as applied requirements, except zinc-rich primers, which must not exceed the 3.5 lb/gal
requirement as applied.
The below listed systems have been prequalified for use, as listed and must be certified for each lot. Although
these products are approved for use, no statement is made about relative ease of application. The contractor
needs to determine the particular application techniques, spray equipment, etc., including inspection
equipment that is needed for acceptance. In all cases, Manufacturers' recommendations shall be followed as
to application requirements and temperature limitations. If there is a conflict between Manufacturer's
recommendation and specification requirement, then, with the approval of the Engineer the Manufacturer's
recommendation will rule. The Manufacturer is required to have a technical service representative on hand
to assist the Contractor the first time that these products are used by the Contractor. Material exceeding
stated range is to be removed and reapplied unless otherwise allowed by the Engineer. No two or more
component material is to be mixed in less than packaged quantities and shall be mixed with power agitators.
All top coats shall be of sufficient dry film thickness to completely cover and hide the intermediate coat and
produce a uniform color and appearance.
GROUP I
Primers in this group shall be used to paint new steel, including contact, bolted and faying surfaces and may
be used to paint existing steel. Prime coats in this group meet Class B slip coefficient requirements.
System Type: Inorganic Zinc primer, cycloaliphatic epoxy intermediate and aliphatic acrylic-polyester
urethane topcoat, organic zinc epoxy repair primer
MANUFACTURER - Carboline Paint Co. St. Louis, MO (888) 227-2654
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Carbozinz 11 HS
Green
2.0-3.0
2.4
Intermediate(s)
Carboguard 893
White
4.0-6.0
1.6
Topcoat(s)
Carbothane 133 LH
As Specified
3.0-5.0
2.7
Primer Repair(s)
Carbozinc 859
2.0-3.0
2.4
NTPEP Test No.: SSC(06)-05 Approval date 10/10 Review date
12/15
July 2015
II-A-48
List No. 13 (cont.)
System Type: Inorganic zinc primer, polyamide epoxy intermediate and aliphatic acrylic polyurethane
topcoat, organic zinc repair primer
MANUFACTURER International Paint, Houston, TX (800) 589-1267
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Interzinc 22 HS
Reddish gray
2.5-3.0
2.8
Intermediate(s)
Intergard 475 HS
White
2.0-4.0
1.76
Topcoat(s)
Interthane 990 HS
As specified
2.0-3.0
2.73
Primer Repair (s)
Interzinc 52
3.0
2.8
NTPEP Test No.: A8-97 Approval date 9/01 Review date
12/15
System Type: Inorganic zinc primer, epoxy intermediate and aliphatic acrylic polyurethane topcoat,
inorganic zinc repair primer.
MANUFACTURER ICI Devoe, Buffalo, NY (716) 824-6455
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Catha-Coat 304V
Gray
2.0-4.0
2.7
Intermediate(s)
Bar-Rust 231
White
4.0-8.0
2.1
Topcoat(s)
Devthane 379UVA
As Specified
2.0-3.0
2.6
Primer Repair(s)
Catha-Coat 302HA
2.0-4.0
2.8
NTPEP Test No.: SSC(04)-04 Approval date 10/07 Review date 12/15
System Type: Inorganic zinc primer, polyamide epoxy intermediate and polyester modified aliphatic
acrylic polyurethane topcoat, organic zinc repair primer.
MANUFACTURER Sherwin Williams Richmond, Va. (804) 387-4050
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Zinc Clad II Plus
Reddish gray
2.0-4.0
2.53
Intermediate(s)
Macropoxy 646
White
5.0-10.0
2.08
Topcoat(s)
Acrolon 218 HS
As specified
3.0-6.0
2.5
Primer Repair (s)
Zinc Clad IV
3.0-5.0
2.57
NTPEP Test No.: SSC(03)-07 Approval Date 7/10 Review date 12/15
July 2015
II-A-49
List No. 13 (cont.)
System Type: Inorganic zinc primer, polyamide epoxy intermediate and Aliphatic Acrylic-polester
urethane topcoat, organic zinc repair primer.
MANUFACTURER Sherwin Williams Richmond, Va. (804) 387-4050
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Zinc Clad Dot
Gray-Green
2.0-4.0
2.6
Intermediate(s)
Steel Spec Epoxy
Off White
3.0-6.0
2.7
Topcoat(s)
Hi-Solids
Polyurethane
As specified
3.0-4.0
2.8
Primer Repair (s)
Zinc Clad IV
3.0-5.0
2.6
NTPEP Test No.: SSC(09)-01 Approval Date 11/10 Review date Fall
2017
July 2015
II-A-50
List No. 13 (cont.)
GROUP IA
Primers in this group shall only be used to paint existing steel and may be used on contact, bolted and
faying surfaces. Prime coats in this group meet Class B slip coefficient requirements.
System Type: Organic zinc primer, polyamide epoxy intermediate, aliphatic acrylic urethane topcoat,
organic zinc repair primer
MANUFACTURER PPG Industries, Inc. Roswell, GA
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Amercoat 68 HS
Redish-Gray
3.0-5.0
2.4
Intermediate(s)
Amercoat 399
White
4.0-8.0
1.5
Topcoat(s)
Amercoat 450 H
As Specified
2.0-5.0
2.6
Primer Repair(s)
Amercoat 68 HS
3.0-5.0
2.4
NTPEP Test No.: SSC(10)-03 Approval Date 11/08 Review date Fall
2015
System Type: Organic zinc primer, polyamide epoxy intermediate, aliphatic acrylic polyester
polyurethane topcoat, organic zinc repair primer
MANUFACTURER Sherwin Williams Richmond, VA (804) 387-4050
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Zinc Clad III HS
Gray-Green
3.0-5.0
2.8
Intermediate(s)
Macropoxy 646
White
5.0-10.0
2.0
Topcoat(s)
Acrolon 218 HS
As Specified
3.0-6.0
2.3
Primer Repair(s)
Zinc Clad III HS
3.0-5.0
2.8
NTPEP Test No.: SSC(04)-03 Approval Date 11/05 Review date 12/15
System Type: Organic zinc primer, epoxy intermediate, aliphatic acrylic urethane topcoat, organic
zinc epoxy repair primer
MANUFACTURER Akzo Nobel / International Paint Jeffersonville,IN
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Interzinc 315 B
Green
2.0-6.0
2.42
Intermediate(s)
Intergard 475HS
EVA 009 BUFF/056
Buff
4.0-8.0
1.72
Topcoat(s)
Interthane 870UHS
As Specified
3.0-5.0
1.91
Primer Repair(s)
Interzinc 315B
2.42
NTPEP Test No.: SSC(07)-02 Approval Date 7/10 Review date Fall
2016
July 2015
II-A-51
List No. 13 (cont.)
System Type: Organic zinc primer, cycloaliphatic amine epoxy intermediate, aliphatic acrylic
polyester polyurethane topcoat, organic zinc repair primer
MANUFACTURER Carboline Paint Co. St. Louis, MO (888) 227-2654
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Carbozinc 859
Green
3.0 5.0
2.7
Intermediate(s)
Carboguard 893
White
4.0 6.0
1.6
Topcoat(s)
Carbothane Aliphatic
Acrylic-Polyester
Polyurethane 133 VOC
As Specified
3.0 5.0
1.3
Primer Repair(s)
Carbozinc 859
3.0 5.0
2.7
NTPEP Test No.: SSC(12)-04 Approval Date 4/15 Review date Spring
2018
July 2015
II-A-52
List No. 13 (cont.)
GROUP II
Primers in this group shall only be used for existing structures that require no painting of contact, bolted or
faying surfaces. Prime coats in this group do not meet Class B slip coefficient requirements.
System Type: Organic zinc primer, epoxy intermediate, acrylic polysiloxane topcoat, organic zinc
repair primer
MANUFACTURER International Paint, LLC Houston, TX (800) 589-1267
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Interzinc 52
Blue, Gray,
Green
2.0-3.0
2.8
Intermediate (s)
Intergard 475HS
Light Gray
4.0-8.0
1.46
Topcoat (s)
Interfine 979
As specified
4.0-6.0
1.82
Primer Repair (s)
Interzinc 52
2.0-3.0
2.8
NTPEP Test No.: SSC(03)-12 Approval Date 8/05 Review date
12/15
System Type: Organic zinc primer, polyamide epoxy intermediate, aliphatic acrylic-polyester
polyurethane topcoat, organic zinc repair primer
MANUFACTURER Carboline Paint Co. St. Louis, MO (888) 227-2654
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Carbozinc 859
Green
3.0-5.0
2.7
Intermediate(s)
Carboguard 888
White
3.0-5.0
2.7
Topcoat(s)
Carbothane 133 LH
As Specified
3.0-5.0
2.6
Primer Repair(s)
Carbozinc 859
3.0-5.0
2.7
NTPEP Test No.: SSC(04)-02 Approval Date 3/08 Review date Fall
2015
Re-qualified as SSC(10)-04
System Type: Organic polyamide epoxy zinc primer with OAP, aliphatic polyaspartic urethane
topcoat, organic zinc repair primer
MANUFACTURER Sherwin Williams Richmond, VA (804) 387-4050
COAT
PAINT
COLOR
DRY FILM
THICKNESS
(mils)
VOC
lb/gal
Primer(s)
Zinc Clad III HS OAP
Gray-Green
3.0-5.0
2.6
Topcoat(s)
Envirolastic 980 PA
As Specified
6.0-9.0
2.3
Primer Repair(s)
Zinc Clad III HS OAP
Gray-Green
3.0-5.0
2.6
NTPEP Test No.: SSC(12)-05 Approval Date 3/14 Review date Fall
2017
July 2015
II-A-53
Note: The prime coat in this system contains OAP (Optically Activated Pigment). Inspection requires the
use of deep purple UV light for holiday detection of the substrate and the finish coat in accordance with
SSPC TU-11.
July 2017
II-A-54
List No. 14
(14) PIPE JOINTS AND CONNECTIONS AND COATINGS (Soils Lab)
The following joint and connection materials and joint and connection types and configurations are listed
categorically by pipe type for which they are used and classified according to their tightness per AASHTO
PP 63 (soil-tight, silt-tight, and leak-resistant). Sections 212, 232, and 302 of the VDOT Road and Bridge
Specifications reference this approved list. Special design joints require a project Special Provision. This
list will be refreshed every 5 years.
Note: Any leak-resistant joint is also silt-tight and soil-tight, and any silt-tight joint is also soil-tight. Higher
classification joints are not listed again separately for the lower classifications for a given pipe type. Only
silt-tight and leak-resistant joints require plant testing as described below.
Nitrile gaskets shall be considered oil-resistant.
CONCRETE PIPE, PIPE ARCH, BOX CULVERTS, AND MANHOLES
Soil-Tight Joints
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Material meeting ASTM
C990:
Butyl-Tite
E-Z Stik
Pro-Stik
RV 30
M-30-B Butyl Sealant
Ram-Nek RN103 Flexible
Plastic Sealant
Ram-Nek RN101
preformed flexible plastic
sealant
Rub’R Nek LTMRN106
butyl rubber sealant
ConSeal CS-102 butyl
rubber sealant
ConSeal CS-102B
Any pipe or arch with
tongue and groove or bell
and spigot joints
Any concrete pipe or box
culvert with tongue and
groove, bell and spigot,
single offset, or O-ring
joints
Any concrete pipe or box
culvert with tongue and
groove or bell and spigot
joints
None
None
None
MultiSeal, Inc.
Evansville, IN
Press-Seal Corp.
Fort Wayne, IN
Ru Van, Inc.
Evansville, IL
Delta Pipe Products
Gainesville, GA
Concrete Sealants Inc.
Tipp City, OH
July 2017
II-A-55
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Clippership Bituminous
Joint Compound MP-52
(asbestos-free trowel
mastic)
Any pipe or arch with
tongue and groove, bell
and spigot, single offset, or
O-ring joints
None
Seaboard Asphalt
Baltimore, MD
Material meeting ASTM
D1056, Type 2A:
R-427-N
Any box culvert with
tongue and groove or bell
and spigot joints
None
Press-Seal Corp.
Fort Wayne, IN
ConSeal CS101, 208
Any pipe or arch with
tongue and groove or bell
and spigot joints
None
Concrete Sealants, Inc.
Tipp City, OH
Closed cell joint filler
Any concrete pipe or box
culvert with tongue and
groove, single offset, or O-
ring joints
None
Press-Seal Corp.
Fort Wayne, IN
Sika Greenstreak
Swellstop Primer
Adhesive and Waterstop
Any concrete box culvert
Sika
St. Louis, MO
Infi-Shield Gator Wrap
Any pipe, arch, or box; 9”
width up to 78” diameter,
12” width up to 108”
diameter
None
Sealing Systems, Inc.
Loretto, MN
Bidco C-56
Any pipe, arch, or box
culvert
None
Trelleborg
Milford, NH
Bidco Wrap
Any pipe, arch, or box
culvert; 9 wrap to 78
diameter, 12” wrap to 108”
diameter
None
Trelleborg
Milford, NH
Silt-Tight Joints Requires independent PE-sealed report of plant verification test on 24” and 48”
diameter pipe (ASTM C443 at 2 psi for straight and deflected position). Plant testing is not required
for joints using external wraps that meet ASTM C877; external wraps not meeting C877 must meet
these test requirements and be of same material properties as those listed in C877.
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Material meeting
ASTM C990:
ConSeal CS102, 202,
302
Butyl-Nek BN109
Any pipe or arch with
tongue and groove joints
(3/4” for 12”-30” dia
pipe; 1” for 36”-48” dia
pipe; 1-1/2” for 54”-72”
dia pipe)
Any concrete pipe or box
culvert with tongue and
groove, bell and spigot,
single offset, or O-ring
joints
None
Concrete Sealants,
Inc.
Tipp City, OH
Henry Company
El Segundo, CA
July 2017
II-A-56
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
External wraps meeting
ASTM C877:
CS-212 external joint
wrap
Infi-Shield Gator Wrap
12”wide minimum
external joint wrap
Any pipe or arch or box
culvert with tongue and
groove, bell and spigot,
single offset, or O-ring
joints; 9” width to 78”
diameter, min. 11” width
to 108” diameter, min.
13” width to 144”
diameter
Any concrete box culvert
with tongue and groove
joints; 9” width to 78”
diameter, min. 11” width
to 108” diameter, min.
13” width to 144”
diameter
Any concrete pipe, arch,
or box culvert
None
None
Concrete Sealants Inc.
Tipp City, OH
Sealing Systems, Inc.
9350 County Road 19
Loretto, MN 55357
Mar Mac DP Coupler,
from 12” to 36” wide
with 4 steel
compression bands
Any concrete pipe or arch
to any metal pipe or arch
or concrete pipe to plastic
pipe, in comparable
diameters; min 13width
for diameters over 108
None
Mar Mac Const.
Products Co., Inc.
334 N. 7th St.
McBee, SC 29101
12” wide double wrap of
VDOT drainage fabric
Any pipe, arch, or box
culvert.
None
VDOT Approved List
No. 63
Leak-Resistant Joints Requires independent PE-sealed report of plant verification test on 24” and
48” diameter pipe (ASTM C443 at 10.8 psi for straight and 10 psi in the deflected position). No testing
required for external wraps meeting ASTM C877 Type I or II. For wraps not meeting ASTM C877,
the same plant verification test may be used to qualify wraps of same applicable material requirements
listed in C877. Geotextile wraps not permitted to qualify joint.
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Material meeting ASTM
C443 or C1619:
Press-Seal gaskets 158-
4G
Press-Seal 4G gaskets
Foltz pipe with profile
offset joint, 15”-36” dia.
CP&P round and elliptical
pipe with profile offset
joint; round, 12”-96
diameter; elliptical,
23”x14” through 91”x48”
None
None
Press-Seal Corp.
Fort Wayne, IN
Foltz Concrete Pipe
York, SC
Press-Seal Corp.
Fort Wayne, IN
Concrete Pipe and
Precast
Hanover &
Chesapeake, VA;
July 2017
II-A-57
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Delta Profile and O-ring
rubber gaskets
Rinker Materials concrete
pipe with single offset
and confined O-ring
joints
None
Jessup, MD;
Oakboro, NC
Delta Pipe Products
Gainesville, GA
Rinker Materials Pipe
Press-Seal gaskets 210-
4G
Foltz pipe with profile
offset joint, 42”-72” dia.
None
Press-Seal Corp.
Fort Wayne, IN
Foltz Concrete Pipe
York, SC
Material meeting ASTM
C443 or C1619 or C361:
Press-Seal O-ring
gaskets
Delta Profile and O-ring
rubber gaskets
Universal Polymer and
Rubber Profile and O-
ring rubber gaskets
CP&P round pipe with
confined O-ring joint,
12”-108” diameter
Rinker Materials concrete
pipe with single offset and
confined O-ring joints
PermaTile Concrete
Products
None
None
None
Concrete Pipe and
Precast
Hanover,
Chesapeake, Salem,
VA; Jessup, MD;
Oakboro, NC
Press-Seal Corp.
Fort Wayne, IN
Delta Pipe Products
Gainesville, GA
PermaTile Concrete
Products
Bristol, VA
Universal Polymer
and Rubber, Ltd.
Middlefield, OH
External wraps meeting
ASTM C877, Type I or
II:
Macwrap and Seal
Wrap, from 9” to 14
wide with 2 steel
compression bands
Any concrete pipe, arch,
or box culvert
None
MarMac Construction
Products Co., Inc.
334 N. 7th St.
McBee, SC 29101
Mar Mac Polyseal
Coupler, with 2 steel
compression bands
Any concrete pipe, arch,
or box culvert
None
MarMac Construction
Products Co., Inc.
334 N. 7th St.
McBee, SC 29101
July 2017
II-A-58
Leak-Resistant Horizontal Manhole Joints (no testing required)
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Material for horizontal
joints meeting ASTM
C990:
Butyl-Tite
E-Z Stik
Pro-Stik
RV 30
ConSeal CS102, 102B
CS-212 external joint
wrap
CP&P round manhole
sections with tongue and
groove or profile offset
joint, 48”-126” diameter;
Nansemond tongue and
groove sections, 48”-84”
None
Concrete Pipe and
Precast
Ashland, Harrisonburg,
Salem, VA;
Martinsburg, WV ;
Greencastle, PA
MultiSeal, Inc.
Evansville, IN
Press-Seal Corp.
Fort Wayne, IN
Ru Van, Inc.
Evansville, IL
Concrete Sealants, Inc.
Tipp City, OH
C-56 Bidco Sealant
None
Trelleborg
Milford, NH
Material for horizontal
joints meeting ASTM
C443:
Press-Seal 4G gaskets
SP/SL Gaskets
CP&P round manhole
sections with profile
offset joint, 48”-120”
diameter
None
None
Press-Seal Corp.
Fort Wayne, IN
Concrete Pipe and
Precast
Ashland, Harrisonburg,
Salem, VA;
Martinsburg, WV ;
Greencastle, PA
Trelleborg
Milford, NH
Material for horizontal
joints meeting ASTM
C443 or C361:
Press-Seal O-ring
gaskets
CP&P round manhole
sections with confined O-
ring joint, 48”-126”
diameter
None
Press-Seal Corp.
Fort Wayne, IN
Concrete Pipe and
Precast
Salem, VA;
Martinsburg, WV
July 2017
II-A-59
Soil-Tight Connectors Concrete Pipe to Structure
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Brick and mortar
connection.
Any pipe, arch, or box
culvert and structure
None
N/A
WS-30 Waterstop
Any pipe, arch, or box
culvert and structure
None
Press-Seal Corp.
Fort Wayne, IN
Silt-Tight Connectors Concrete Pipe to Structure
Resilient connectors
meeting ASTM C1478:
None at this time
Leak-Resistant Connectors Concrete Pipe to Structure
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Brick and mortar
connection, with double
exterior geotextile wrap.
Wrap to extend 2 ft. over
pipe and around entire
structure to be held in
place with minimum 1”-
wide tightened metal
bands.
Any pipe, arch, or box
culvert and structure
None
N/A
CORRUGATED METAL PIPE, ARCH, and PLATE
Soil-Tight Joints
Joint Materials
For Use With Joint
Type/ Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Annular corrugated or
helical corrugated pipe
with annular rerolled
ends with: partially-
corrugated (end rerolled
to a 2-2/3-by-1/2 in
corrugation) or fully-
corrugated bands and
connectors of banded
angle, oval lugs, or bar
and straps
Any VDOT approved
corrugated metal pipe or
arch
None
Hardware (band angle,
lugs, bolts, bars, straps):
Nucor LMP Steel, Inc.
2000 East First Street
Maryville, MO 64468
Gaskets:
Pro Tech Fabricators
801 Macon Street
Bedford, VA 24523
July 2017
II-A-60
Silt-Tight Joints No test method currently specified in AASHTO PP-63; therefore, an independent
PE-sealed report is required on a plant verification test consisting of a minimum 10-ft section of pipe
on each side of joint assembled similar to field assembly in straight and deflected positions and tested
as per Section 7 of ASTM D3212, but at 2 psi in the straight and deflected position, on 24” and 48”
diameter pipe. There is no report or testing requirement for joints using external wraps at least 10.5
inches wide.
Joint Materials
For Use With Joint
Type/ Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Only annular rerolled
ends with: partially-
corrugated band, fully-
corrugated band, or flat
band, with O-ring
gasket meeting ASTM
D1056 and connectors
of banded angle, oval
and lugs, or bar and
straps; and having a
minimum 12-in wide
double geotextile fabric
wrap
Any VDOT approved
corrugated metal pipe or
arch
None
Hardware (angle, lugs,
bolts, bars, straps):
Nucor LMP Steel, Inc.
2000 East First Street
Maryville, MO 64468
O-rings:
Mar Mac Dissimilar
Pipe (DP) Coupler,
covering 2 corrugations
or 8” minimum each
side of joint for rerolled
ends with 4 steel
compression bands
Any metal pipe or arch
to any concrete pipe or
arch or metal pipe to
plastic pipe, in
comparable diameters
None
Mar Mac Const.
Products Co., Inc.
334 N. 7th St.
McBee, SC 29101
Infi-Shield Gator Wrap
12” wide minimum
external wrap
Any pipe, arch, or box
culvert
None
Sealing Systems, Inc.
9350 County Road 19
Loretto, MN 55357
12” wide double wrap
of VDOT drainage
fabric
Any pipe, arch, or box
culvert.
None
VDOT Approved List
No. 63
Leak-Resistant Joints No test method currently specified in AASHTO PP-63; therefore, an
independent PE-sealed report is required on a plant verification test consisting of a minimum 10-ft
section of pipe on each side of joint assembled in straight and deflected positions and tested as per
Section 7 of ASTM D3212, but at 10.8 psi in the straight position and 10 psi in the deflected position,
on 24” and 48” diameter pipe. External wraps require same test. Geotextile wraps not permitted to
qualify joint.
Joint Materials
For Use With Joint
Type/ Configuration
Expiration Date
Man’f/Vendor &
Facility Location
None at this time
July 2017
II-A-61
Soil-Tight Connectors Metal Pipe to Structure
Joint Materials
For Use With Joint
Type/ Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Brick and mortar
connection. For
corrugated pipe, 2
corrugations must be
covered.
Any pipe or arch and
structure
None
N/A
Silt-Tight Connectors Metal Pipe to Structure
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Brick and mortar
connection, 2
corrugations covered
for corrugated pipe,
with double exterior
geotextile wrap. Wrap
to extend 2 ft. over pipe
and around entire
structure to be held in
place with minimum
1”-wide tightened
metal bands.
Any pipe or arch and
structure
None
N/A
Leak-Resistant Connectors Metal Pipe to Structure
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Brick and mortar
connection, 2
corrugations covered
for corrugated pipe,
with double exterior
geotextile wrap. Wrap
to extend 2 ft. over pipe
and around entire
structure to be held in
place with minimum
1”-wide tightened
metal bands.
Any pipe or arch and
structure
None
N/A
July 2017
II-A-62
PLASTIC PIPE
Soil-Tight Joints
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Split coupler, single or
double wide, covering 2
corrugations each side of
joint
12”-24” dia. ADS
AASHTO M294 (N-12
plain end) pipe
30”-60” dia. ADS
AASHTO M294 (N-12
plain end) pipe
None
Advanced Drainage
Systems, Inc.
4640 Trueman Blvd.,
Hilliard, OH 43026
McClarin Plastics
15 Industrial Dr.,
Hanover, PA 17331
Elastomeric gaskets
meeting ASTM F477:
12”-60” dia. in-line bell
and spigot joint, ADS
AASHTO M294 HDPE
pipe.
None
Soleno double bell with
clips; bell with clips
welded to pipe; bell with
O-ring gasket
12” dia. Soleno HDPE
pipe; 15”-36” dia. pipe;
42”-60” dia. pipe
None
Soleno
64 North Lane
McAdam, NB E6J
1K6
Canada
Split coupler or banded
coupler from same as pipe
man’f, covering 2
corrugations each side of
joint
Any VDOT approved
plastic pipe, 12” to 60” dia.
None
External cleated snap
coupler, covering 2
corrugations each side of
joint
Any VDOT approved
plastic pipe, 3” to 12” dia.
None
Silt-Tight Joints Requires independent PE-sealed report of plant verification test on 24” and 48”
diameter pipe (ASTM D3212 with a maximum test pressure of 2 psi, in straight and deflected
positions). This test is also required for external wraps. Geotextile wraps are not permitted to qualify
joint.
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Split coupler, single or
double wide, covering 2
corrugations each side of
joint, with external filter
fabric wrap 1 ft each side
of joint
12”-24” dia. ADS
AASHTO M294 Type S
or SP (N-12 plain end)
pipe
30”-60” dia. ADS
AASHTO M294 Type Sor
SP (N-12 plain end) pipe
None
None
Advanced Drainage
Systems, Inc.
4640 Trueman Blvd.,
Hilliard, OH 43026
McClarin Plastics
15 Industrial Dr.,
Hanover, PA 17331
July 2017
II-A-63
Leak-Resistant Joints Requires independent PE-sealed report of plant verification test on 24” and
48” diameter pipe (ASTM D3212 with a maximum test pressure of 10.8 psi). External wraps must
meet same testing. Geotextile wraps are not permitted to qualify joint.
Joint Materials
For Use With Joint
Type/Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Elastomeric gaskets
meeting ASTM F477:
Press-Seal 10.8 psi
gasket
Vertex 10.8 psi gasket
Hamilton Kent 10.8 psi
gasket
Trelleborg 10.8 psi
gasket
SpringSeal gasket
In-line bell and spigot
joints, ADS 12”-60” dia.
AASHTO M294 HDPE or
330 Polypro pipe.
None
None
None
None
None
Press-Seal Corp.
2424 West State Blvd
Fort Wayne, IN 46808
Vertex, Inc.
3956 Mogadore
Industrial Pkwy
Mogadore, OH 44260
Hamilton Kent
740 Baxter Lane
Winchester, TN 37398
77 Carlingview Drive
Toronto, ON M9W
5E6
Canada
Trelleborg
250 Elm St.
Milford, NH 03055
SpringSeal, Inc.
800 Enterprise Pkwy.
Ravenna, OH 44266
Mar Mac Polyseal
Coupler, covering 1
corrugation each side of
joint with 2 steel
compression bands
Any HDPE corrugated
pipe
12”-60” dia. AASHTO
M330 Polypropylene Pipe
None
MarMac Construction
Products Co., Inc.
334 N. 7th St.
McBee, SC 29101
Soil-Tight Connectors Plastic Pipe to Structure
July 2017
II-A-64
Joint Materials
For Use With Joint
Type/ Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Brick and mortar
connection. For
corrugated pipe, 2
corrugations must be
covered.
Any pipe or arch and
structure
None
N/A
Rubber booted
connection or pre-cast
into structure, secured to
corrugated pipe stub with
or without smooth solid
HDPE sleeve welded
over corrugated portion
of pipe stub.
12”-60” dia. AASHTO
M294 HDPE or M330
Polypro pipe
None
A-Lok
(12” to 60” dia.)
697 Main Street
Tullytown, PA 19007
Press-Seal Corporation
(12” to 60” dia.)
2424 West State Blvd
Fort Wayne, IN 46808
Trelleborg Kor-N-Seal
(12” to 60” dia.)
250 Elm St.
Milford, NH 03055
Corrugated Pipe
Adaptors (CGA) with
Kor-N-Seal Connectors
Pipe 8” – 60” diameter
None
Trelleborg
Milford, NH
Silt-Tight Connectors Plastic Pipe to Structure
Joint Materials
For Use With Joint
Type/ Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Brick and mortar
connection with double
exterior geotextile wrap.
Wrap to extend 2 ft. over
pipe and around entire
structure to be held in
place with minimum 1”-
wide tightened metal
bands.
Any pipe
None
N/A
Leak-Resistant Connectors Plastic Pipe to Structure
Joint Materials
For Use With Joint
Type/ Configuration
Expiration Date
Man’f/Vendor &
Facility Location
Brick and mortar
connection with double
exterior geotextile wrap.
Wrap to extend 2 ft. over
pipe and around entire
structure to be held in
place with minimum 1”-
wide tightened metal
bands.
Any pipe
None
N/A
July 2017
II-A-65
PIPE COATINGS (for corrosion protection)
Brand Name/Material
Manufacturer
Bitumastic 50, 300M
Koppers Company
Pittsburgh, PA
Cooper Black #750
Coopers Creek Chemical Corp.
West Conshohocken, PA
40 mils bonded PVC pre-coating
Any
February 2011
II-A-66
List No. 15
(15) APPROVED STUD SHEAR CONNECTORS (Structures)
The Manufacturers listed below have qualified their stud shear connectors in accordance with Sec. 232(h) of
the Virginia Department of Transportation Road and Bridge Specifications. Effective immediately, these
studs may be used on Virginia construction projects without evidence of test or certification.
Manufacturer
Division or Trade Name
Size
BlueArc Stud Welding
BlueArc
1/4, 3/8, 1/2, 5/8, 3/4, 7/8
Cox Industries
Cox
3/8, 1/2, 5/8, 3/4, 7/8
Nelson Stud Welding
Nelson
1/4, 3/8, 1/2, 5/8, 3/4, 7/8
Stud Welding Associates, Inc.
Ultra-Arc
1/4, 3/8, 1/2, 5/8, 3/4, 7/8
Tru-Fit Screw Products, Corp.
Tru-Weld
3/8, 1/2, 5/8, ¾, 7/8
July 2017
II-A-67
List No. 16
(16) APPROVED SURFACE MOUNTED and GROUND MOUNTED FLEXIBLE POST
DELINEATORS (Chemistry Lab)
Trade Name
Manufacturer
Local Representative
SH 236 SMA WS
SH 336 SMA WS
SH 536 SST-YO
Safe Hit Series includes various
heights and mounting
assemblies
Dura-Post and Safe-Hit
Series includes various
heights and mounting
assemblies.
Safe-Hit Corporation
35 East Wacker Drive,
Suite 1100
Chicago, IL 60601
312.467.6750
Korman Signs, Inc.
Richmond, VA
804.262.6050
Channelizer
SDCF303601MB
Carsonite International
10 Bob Gifford Blvd.
Early Branch, SC 29916
803-943-9115
Carsonite International
Paul R. DuBay
605 Bob Gifford Blvd.
Early Branch, SC 29916
804-778-7775
Tra-Flex 36"
Arkan Plastics
136 SE 20th Street
Great Bend, KS 67530
620-792-3794
Protection Services
3027 Christian Ave
Roanoke, VA 24012
540-362-2777
Flex Stake TM 750 series
Flexstake Inc.
2150 Andrea Lane
Fort Myers, FL 33912
800-348-9839
RGA Inc.
454 Southlake Blvd.
Richmond, VA 23236
804-794-1592
FG 300 UR
FG300 EFX
FG300 PE
City Post
Includes various heights and
mounting assemblies.
Pexco-Davidson Traffic
Control Products
Tacoma, Inc.
3110 70th Avenue East
Tacoma, WA 98424
253-284-8000
Highway Safety Supply
P.O. Box 128
Brandy Station, VA 22714
540-825-2675
D36F
TUFFTP36
TUFFTP42
TUFFTP48
Impact Recovery Systems
P.O. Box 12637
246 West Josephine St.
San Antonio, TX 78212
210-736-4477
TD-5200
TD-5275
TD-5500
TD-5600
Three D Traffic Works, Inc.
430 N. Varney St.
Burbank, CA 91502
(877)843-9757
July 2017
II-A-68
Shur-Flex, Surface Mount Del.
Shur-Flex, Driveable Del.
Shur-Tite Products
P.O Box 2283
Round rock, TX 78680
512-218-9500
Shur-Tite Products
Mike Ostler
P.O Box 2283
Round rock, TX 78680
Cell 980-939-4551
TSM 360 Series
FTSM 360 Series
Includes various heights and
mounting assemblies
NDM Marking Systems, Inc.
26 Gateway Dr.
Jasper, GA 30143
(706) 253-3040
September 2012
II-A-69
List No. 17
(17) QUALIFIED PREFORMED TAPE LIST (Chemistry Lab)
The following products have been prequalified, but the manufacturer must supply certification for
each lot.
Manufacturer's instructions for installation shall be followed both as to method and temperature of application
to pavement requirements. Primer/sealers may be required; the manufacturer’s specific recommendations
shall be followed, and the cost of the primer/sealer shall be included in the bid price or unit price. Although
approved for use, not all products may be equal in all characteristics. Contractor needs to determine the best
product for his intended use.
Name
Manufacturer
Approval No.
Type B Class IV
These tapes may be used for stop lines, crosswalks, messages and arrows only:
Series 1000, White
Brite-Line Technologies
STR-96-137-PA
ATM 300, White
Advance Traffic Markings
STR-98-TX-510
ATM 300, Yellow
Advance Traffic Markings
STR-98-TX-511
3M 390, White
3M
PMM-2010-01-026
3M 391, Yellow
3M
PMM-2010-01-027
Type B Class VI (See Note 2 below for Slurry and Latex Emulsion Surfaces)
These tapes may be used for edge lines, center and skip lines, messages and arrows only:
A 380I ES, White
3M
MS 13965
A 381I ES, Yellow
3M
MS 13966
A 380 WR, White
3M
MS 19276
A 381 WR, Yellow
3M
MS19277
A 380 WR ES, White
3M
MS 19276
A 381 WR ES, Yellow
3M
MS19277
A 380 AW, White
3M
MS 13965
A 381 AW, Yellow
3M
MS 13966
3M 390, White
3M
PMM-2010-01-026
3M 391, Yellow
3M
PMM-2010-01-027
A 380AW-5, White Contrast
Tape
3M
MS13965
A 381 AW-5, Yellow Contrast
Tape
3M
MS13966
A 380I-5 ES White Contrast
Tape
3M
MS11107
A 381I-5 ES, Yellow Contrast
Tape
3M
MS11108
XRP, White
Brite-Line Technologies,
LLC
PMM-2011-01-017(PA), MS
21492
September 2012
II-A-70
Name
Manufacturer
Approval No.
XRP-E Yellow
Brite-Line Technologies,
LLC
PMM-2010-01-017(PA),
MS21493
XRP-HCL, White Contrast Tape
Brite-Line Technologies,
LLC
PMM-2011-01-017(PA), MS
21492
XRP-E-HCL, Yellow Contrast
Tape
Brite-Line Technologies,
LLC
PMM-2010-01-017(PA),
MS21493
Note 1: The Prefix “A” = Adhesive - may not be designated on the product number
tested.
Note 2: A low VOC primer adhesive shall be used as part of the manufacturer’s
installation instructions when installed on Slurry or Latex Emulsion surfaces.
The following products have been prequalified, but the manufacturer must supply certification for
each lot.
Name
Manufacturer
Approval No.
Type D Class I Temporary Tape
ATM 200 White
Advance Traffic Markings
STR-98-TX-507
ATM 200 Yellow
Advance Traffic Markings
STR-98-TX-508
ATM 2000W White
Advance Traffic Markings
PMM-02-12-MS
ATM 2000 Y Yellow
Advance Traffic Markings
PMM-02-13-MS
Series 100 White
Brite-Line Technologies
PMM-04-014-MS
Series 100 Yellow
Brite-Line Technologies
PMM-05-007-PA
RY-140 White
Trelleborg
PMM-2000-187-PA
RY-140 Yellow
Trelleborg
PMM-2000-188-PA
3M 710, White
3M
PMM-09-020-FL,MS 22605
3M 711, Yellow
3M
PMM-09-021-FL, MS 22606
Type D Class II Temporary Tape
ATM 200 White
Advance Traffic Markings
STR-98-TX-507
Series 100 White
Brite-Line Technologies
PMM-04-014-MS
Series 100 Yellow
Brite-Line Technologies
PMM-05-007-PA
ATM 2000W White
Advance Traffic Markings
PMM-02-12-MS
ATM 2000Y Yellow
Advance Traffic Markings
PMM-02-13-MS
3M 710, White
3M
PMM-09-020-FL,MS 22605
3M 711, Yellow
3M
PMM-09-021-FL, MS 22606
Type D Class III Temporary Tape (Wet Reflective)
Scotchlane 780 White
3M
PMM- 06-010-MS, MS 18477
Scotchlane 781 Yellow
3M
PMM- 06-011-MS, MS 18478
3M 710, White
3M
PMM-09-020-FL,MS 22605
3M 711, Yellow
3M
PMM-09-021-FL, MS 22606
September 2012
II-A-71
Name
Manufacturer
Approval No.
Delta-Line TWR-White
Brite-Line Technologies, Inc.
PMM-09-005-FL, MS 21321
Delta-Line TWR- Yellow
Brite-Line Technologies, Inc.
PMM-09-006-FL, MS 21322
The following products have been prequalified, but the manufacturer must supply certification for
each lot.
Name
Manufacturer
Approval No.
Type E
3M, Series A145
3M
STR-93-111
3M, 715 Black
3M
2009-FL-022, MS 22940
ATM 280 Black
Advance Traffic Markings
STR-98-TX-509
Deltaline BTR
Brite-Line Technologies
STR-97-83-MN
RB-140 Black
Trelleborg
PMM-01-UT-28
September 2012
II-A-72
List No. 18
(18) ABRASIVES (Chemistry Lab)
EXPENDABLE ABRASIVES
1. Starblast XL DuPont
Phone: (800) 441-9487
2. Black Blast -- Virginia Materials and Supplies
Phone: (757) 855-0155
3. GMA ROM 30 x 60 Garnet Barton Mines Company
Phone: (800) 792-5462
4. Crystalgrit -- Virginia Materials and Supplies
Phone: (757) 855-0155
5. Glass Jet Virginia Materials and Supplies
Phone: (757) 855-0155
6. Western’s Bengal Bay Garnet – Virginia Materials and Supplies
Phone: (757) 855-0155
7. Reed Minerals Black Beauty 1240 from Moundsville WV plant
Phone: (717) 763-4200
8. Reed Minerals Black Beauty 2040 from Moundsville WV plant
Phone: (717) 763-4200
9. Reed Minerals Black Beauty 4490 from Moundsville WV plant
Phone: (717) 763-4200
June 2012
II-A-73
List No. 19
(19) APPROVED LIST OF ABSORPTIVE SOUNDWALL COLOR COATINGS (Structures)
The following color coating may be used on sound absorptive soundwall panels for the purpose of obtaining
the specified color using brand names, provided manufacturing specifications are followed specifically.
Product
Manufacturer
Canyon Tone Stain
United Coatings
Cementrate
Harris Specialty Chemicals, Inc.
Cold-Flex Stain
Cold -Flex, Inc.
FX-430
Fox Industries
Nitocote Cementrate WB (Waterbased)
Harris Specialty Chemicals, Inc.
H&C Silicone Acrylic Concrete Stain
Sherwin Williams
Aquastain T-96
The Euclid Chemical Company
Rainstopper Concrete Stain
Textured Coatings of America, Inc.
Tex*Cote 300 Bridge-Cote Smooth Coating
Textured Coatings of America, Inc.
Tex*Cote XL-70 Bridge-Cote Smooth Coating
Textured Coatings of America, Inc.
May 2017
II-A-74
List No. 20
(20) APPROVED WATER BORNE TRAFFIC PAINT (TYPE A) (Chemistry Lab)
Manufacturer
Product Number
NTPEP Submittal Number
WHITE PAINT
Sherwin Williams
BP14016
STR-97-41-AL
BP14019
STR-97-44-AL
BP15652 / TM 2324
STR-98-PA-135
BP15622
STR-98-PA-150
BP17312
PMM(2000PA)-170
BP17313
PMM(2000PA)-171
BP17316
PMM(2000PA)-174
Ennis Paint
(formerly LaFarge Road Markings
and Centerline)
CL-6000
STR-96-85-PA
CL-6004
STR-96-68-PA
CL-7018
STR-97-69-AL
CL-8210
STR-98-PA-96
CL-8214
STR-98-PA-100
CL-8216
STR-98-PA-102
CL-8218
STR-98-PA-104
CL-8220
STR-98-PA-106
CL-8222
STR-98-PA-108
Ennis Paint
(formerly LaFarge Road Markings
and Linear Dynamics)
LD96-1002
STR-96-85-PA
LD96-1008
STR-96-91-PA
LD971001C
STR-97-138-AL
LD981001
STR-98-PA-158
LD981002
STR-98-PA-159
LD981003
STR-98-PA-160
LD981004
STR-98-PA-161
LD981005
STR-98-PA-162
Ennis Paint
(formerly LaFarge Road Markings)
LRMOOWB-19
PMM(2000PA)-110
LRMOOWB-20
PMM(2000PA)-111
Ennis Paint
Douglas 303-98
STR-98-PA-214
Ennis EP200W13
STR-98-PA-17
Ennis EP200W14
STR-98-PA-18
Ennis EP200W16
STR-98-PA-20
EP415W03
PMM(2000PA)-61
EP415W04
PMM(2000PA)-62
Ozark Materials, LLC
14224 White
PMM-2015-01-110
May 2017
II-A-75
List No. 20 (Cont’d.)
Manufacturer
Product Number
NTPEP Submittal Number
YELLOW PAINT
Sherwin Williams
BP-14021
STR-97-46-AL
BP15611 / TM 2325
STR-98-PA-139
BP15623
STR-98-PA-151
BP17314
PMM(2000PA)-172
Ennis Paint
(formerly LaFarge Road Markings
and Linear Dynamics)
LD961009
STR-96-92-PA
LD981009
STR-98-PA-165
LD981010
STR-98-PA-166
Ennis Paint
(formerly LaFarge Road Markings)
LRMOOWB-31
PMM(2000PA)-122
Aexcel
72Y-AO65
STR-96-148-PA
Ennis Paint
Douglas 306-98
STR-98-PA-217
Douglas 307-98
STR-98-PA-218
Ennis EP200Y-15
STR-98-PA-26
Ennis EP200Y-18
STR-98-PA-29
EP415Y03
PMM(2000PA)-66
EP415Y04
PMM(2000PA)-67
EP415Y05
PMM(2000PA)-68
EP415Y06
PMM(2000PA)-69
Ozark Materials, LLC
24224 Yellow
PMM-2015-01-111
June 2012
II-A-76
List No. 21
(21) QUALIFIED #14 ALUMINUM EPOXY MASTIC COATINGS (Chemistry Lab)
(SYSTEM F)
Note: All approved paint systems must not exceed the 2.8 lb/gal/VOC requirement as applied.
The following coatings have been prequalified for use in accordance with Road & Bridge Specifications,
Section 231. Each lot must be certified in accordance with the Materials Division Manual of Instructions.
Carboline
Carbomastic 15
Carboline
Carbomastic 90 Aluminum
International Paint
Interplus 670 HS AL
Sherwin Williams
Epoxy Mastic Aluminum II
The following epoxy mastic products are available in colors, and have been prequalified for use where
colored topcoats are specified.
Carboline
Carboguard 890
Carboline
Carboguard 890 LT
Sherwin Williams
Macropoxy High Solids
The following urethane products may also be used for colored topcoats.
Carboline
Carbothane 133 LH
Carboline
Carbothane 134 HS
International Paint
Interthane 870UHS
Sherwin Williams
Acrolon 218 HS
July 2017
II-A-77
List No. 22
(22) PAVEMENT MARKERS (Chemistry Lab)
SNOW PLOWABLE RAISED PAVEMENT MARKERS
Manufacturer
Casting
Model No.
Reflector
Description
Casting
Adhesive
Reflector
Adhesive
Ennis Traffic Safety
Solutions
(Note 5)
98 (Note 1)
101 - MS 08185
(Note 5)
Ennis 940
Ennis 944
Ray-O-Lite
2004/2004S
3M 190
Ennis C-40
(Note 2)
Epoplex MA-50 or
Epoplex MA-52 or
Lord Corp. Thermoset EP-87
Note 3, Note 4
Liquid Nails 602
Accent Stripe, Inc.
(Note 5)
Northstar 41
(Note 5)
Ray-O-Lite
2004/2004S
3M 190
Ennis C-40
Lumiline SMA
Note 4
Liquid Nails 602
Ray-O-Lite / Hallen
(Note 5)
H-1010 HP
H-960 HP
Snow-Lite 100
(Note 5)
Ray-O-Lite
2004/2004S
3M 190
Ennis C-40
Epoplex MA-50 or
Epoplex MA-52 or
Slocum Type M-397
Note 4
BK0246-01
Liquid Nails 602
NOTES:
1. The Model 98 has been discontinued. The 940 reflector can be used as a replacement in existing
Model 98 castings. The Model 98 has been replaced with the approved castings listed above.
2. All reflectors are approved for use in any casting in which they fit.
3. Lord Corp. Thermoset EP-87 formerly Epoxy #2203.
4. Any approved casting adhesive may be used with any casting provided they meet AASHTO,
M-237, Type IV specifications.
5. Castings meets “Made in America” requirements.
July 2017
II-A-78
List No. 22 (cont.)
TEMPORARY PAVEMENT MARKERS
Manufacturer
Marker No.
Size
Adhesive
Ennis Traffic Safety Solutions
88
4″ x 4″
2202 Bitumen or
AASHTO-M237, Type II
Ennis Traffic Safety Solutions
11
4″ x 4″
2202 Bitumen or
AASHTO-M237, Type II
Ennis Traffic Safety Solutions
948
2″ x 4″
2202 Bitumen or
AASHTO-M237, Type II
Ennis Traffic Safety Solutions
C-80
4” x 4”
2202 Bitumen or
AASHTO-M237, Type II
Ennis Traffic Safety Solutions
C-40
2” x 4”
Bitumen Adhesive or
AASHTO-M237, Type II
Ray-O-Lite
“Standard”
Types B, D, DR
4″ x 4″
Bitumen Adhesive
Ray-O-Lite
2004, 2004S
Types B, C, D, DR,
G, H, K, X, Z
2″ x 4″
Bitumen Adhesive
Ray-O-Lite
Model AA
Types B, C, D, DR,
G, H, K, X, Z
4″ x 4″
Bitumen Adhesive
Ray-O-Lite
Model AA-ARC II
Types B, C, D, DR,
G, H, K, X, Z
4″ x 4″
Bitumen Adhesive
3M
290 (White)
291 (Yellow)
3.5″ x 4″
3.5″ x 4″
Bitumen Adhesive
PEXCO, LLC
(formerly
Filtrona / Bunzl Extrusion)
DAPCO RPM
4″ x 4″
Bitumen Adhesive
FLEXIBLE TEMPORARY PAVEMENT MARKER (FTPM) (Chip Seal/Overlay)
For 14 Day Maximum Usage
Manufacturer
Marker No.
Size
Adhesive
PEXCO, LLC.
(formerly
Filtrona / Bunzl Extrusion)
TOM W-1
TOM W-2
TOM Y-1
TOM Y-2
4” Length
Bitumen Adhesive
APEX
MODEL 932
CW/CW2
CY/CY2
CWOL/CW2OL
CYOL/CY2OL
4” Length
Bitumen Adhesive
July 2017
II-A-79
List No. 22 (cont.)
RECESSED PAVEMENT MARKERS
Manufacturer
Marker No.
Size
Adhesive
Ray-O-Lite
2004, 2004S
Types B, C, D, DR,
G, H, K, X, Z
For 4″ wide
slots/grooves
EP-326 Epoxy
Ennis Traffic Safety Solutions
948
For 4.5″ wide
slots/grooves
2202 Bitumen or AASHTO-M237,
Type II
Ennis Traffic Safety Solutions
944SB
For 4″ wide
slots/grooves
2202 Bitumen or AASHTO-M237,
Type II
Ennis Traffic Safety Solutions
C-40
For 4″ wide
slots/grooves
2202 Bitumen or AASHTO-M237,
Type II
July 2014
II-A-80
List No. 23
(23) DELINEATORS (Chemistry Lab)
GUARDRAIL DELINEATORS
Manufacturer
Model No.
Adhesive Part No.
Pexco/Davidson TCP
DAPCO I-Flex Guardrail
Marker
Davidson Straight
Guardrail Reflector
DAPCO 795A
Duraflex
Railrider
H.B. Fuller SCO 252124
Eastern Metal/USA-Sign
661 (one-sided) (Note 1)
Dow Corning #795 Silicone or
Courtlaulds PRC Rapid Seal
662 (two-sided) (Note 1)
Dow Corning #795 Silicone or
Courtlaulds PRC Rapid Seal
631 (one-sided) (Note 1)
Dow Corning #795 Silicone or
Courtlaulds PRC Rapid Seal
632 (two-sided) (Note 1)
Dow Corning #795 Silicone or
Courtlaulds PRC Rapid Seal
Artuk, Inc.
FT-1 (Note 1)
Artuk Cement # SB-12
FR-1
FB-33
Pexco/Davidson TCP
PCBM-9
DAPCO 795A
PCBM-T9 (3”x 4”)
DAPCO 795
Pexco/Davidson TCP
PCBM-T9
(2” x 4.5”)
DAPCO 795
NOTE 1: For use when guardrail has wooden blockout posts.
July 2014
II-A-81
List No. 23(cont.)
BARRIER DELINEATORS
Manufacturer
Model No.
Adhesive Part No.
Pexco/Davidson TCP
PCBM-9
DAPCO 795A
Duraflex
Flexx 2020
H.B.Fuller SCO 252124
Eastern Metal/USA-Sign
661 (one-sided)
Dow Corning #795 Silicone or
Courtlaulds PRC Rapid Seal
662 (two-sided)
Dow Corning #795 Silicone or
Courtlaulds PRC Rapid Seal
631 (one-sided)
Dow Corning #795 Silicone or
Courtlaulds PRC Rapid Seal
632 (two-sided)
Dow Corning #795 Silicone or
Courtlaulds PRC Rapid Seal
Artuk Inc.
FT-1
Artuk Cement # SB-12
FB-33
Pexco/Davidson TCP
PCBM-T9 (3” x 4”)
DAPCO 795
Pexco/Davidson TCP
PCBM-T9 (2” x 4.5”)
DAPCO 795
ROAD EDGE DELINEATORS
(Single or Double Element Type)
Manufacturer
Model No.
Shape
Ennis Paint/Stimsonite)
975
3.25″ Circular
AKT
18 (Delineator only)
181 (Delineator with Bracket)
3.25″ Circular
Ray-O-Lite
RT-90
3.25″ Circular
NOTES:
January 2018
II-A-82
List No. 24
(24) MINERAL ADMIXTURES FOR HYDRAULIC CEMENT CONCRETE (Physical Lab)
To have a product included on the Approved List for "Mineral Admixtures for Hydraulic Cement Concrete" the
following shall be submitted to Materials Division’s Physical Laboratory Assistant Concrete Program Manager a
letter with a notarized signature stating that the mineral admixture meets the appropriate requirements in Section
215.02 (G, H or I) of the VDOT Road and Bridge Specifications. Fly Ash meets ASTM C-618, Class F, Slag meets
ASTM C-989 grade 100 or 120. Silica Fume meets AASHTO M-307.
Upon approval the Mineral Admixtures Manufacturer will be required to submit each year a letter with a notarized
signature stating that the chemical admixture meets the requirements of the appropriate method. Also quarterly mill
certifications’ showing that the material is staying within the specification range.
Fly Ash
Class F Fly Ash Source
Plant ID
Remarks
AshVenture
Roxboro, NC
113
Class F
Belews Creek, NC
102
Class F
Boral
Bowen Plant, Stilesboro, GA
111
Class F
St. Johns River Plant
139
Class F
Charah
Miami Fort Planr North Bend, OH
144
Class F
Fly Ash Direct
John Amos Plant, Winfield, WV
127
Class F
Mountaineer Plant, New Haven, WV
145
Class F
Headwaters
Brayton Point Station, Somerset, MA
133
Class F
W.H. Sammis Plant, Stratton, OH
134
Class F
Fort Martin Plant, Maidsville, WV
137
Class F
Riverside
Civitavecchia, Italy
143
Class F
SEFA
Bull Run Fossil Plant Oak Ridge, TN
132
Class F
Cumberland Station Cumberland City, TN
135
Class F
Cross Station Pineville, SC
129
Class F
Eastman Station Kingsport,, TN
123
Class F
Kingston Fossil Plant Harriman, TN
136
Class F
McMeekin Station Columbia, SC
128
Class F Bagged product
Morgantown Generation Station, Newburg, MD
120
Class F
Wateree Station Code Eastover, SC
130
Class F
Winyah Generation Station Georgetown, SC
131
Class F
SCE&G Williams Station Goose Creek, SC
140
Class F
Keystone Generating Station Shelocta, PA
141
Class F
January 2018
II-A-83
List 24 (cont.)
Fly Ash (cont.)
Class F Fly Ash Source
Plant ID
Remarks
Sparation Technologies
Brandon Shores Station
119
Class F
Brunner Island Station
125
Class F
EDP Sines, Portugal
142
Class F
Spartan Materials
Spartan AC34, India
138
Class F
Slag
GGBF Slag Source
Plant ID
Remarks
Argos USA
Tampa, FL
710
Grade 120
Larfarge / Holcim
Sparrows Point, MD
700
Grade 120
Lehigh
Camden, NJ
703
Grade 120
Evansville plant
704
Grade 120
Middlebranch OH
708
Grade 100
Silica Fume
Silica Fume Source
Plant ID
Remarks
Advanced Cement Technologies
904
RED Industrial Products
Mississippi Silicon
909
R-E-D Fume 102 DM
BASF
905
MasterLife SF 100
Elkem
908
EMS 970D
Sika
906
Sikacrete 950 DP
W. R. Grace
907
Force 10000 D
Metakaolin
Metakaolin Source
Plant ID
Remarks
BASF Corporation
912
MetaMax
Advanced Cement Technologies
910
PowerPozz
GCP Applied Technologies
911
Grace HRMK 100
January 2013
II-A-84
List No. 25
(25) CORRUGATED METAL PIPE PRODUCERS ON QA/QC PROGRAM (Quality Assurance)
The following manufacturers of corrugated metal culvert pipe have VDOT approved Quality
Assurance programs as outlined in the instructions. For additions and deletions to this list
contact the District Materials Engineer.
Manufacturer
Plant Location
ConTech Construction Products
Greencastle, PA
ConTech Construction Products
Charlotte, NC
ConTech Construction Products
Raleigh, NC
ConTech Construction Products
Ashland (Summit), KY
Lane Metal Products
Bedford, PA
Lane Metal Products
Dublin, VA
Public Drainage Supply
Blountville, TN
Smith Setzer & Sons, Inc.
Catawba, NC
Supplier
Plant Location
Bowie Sales, Inc.
Shawsville, VA
Carl M. Henshaw Drainage Products
Chester, VA
CMC Supply, Inc.
Roanoke, VA
ConTech Construction Products
(Formerly Plateau Pipe, LLC)
Cookeville, TN
Eastern Supply, Inc.
Winchester, VA
Jennmar Specialty Products
Cedar Bluff, VA
Lane Metal Products
Bealton, VA
*P = Probationary
September 2016
II-A-85
List No. 26
(26) CONCRETE PIPE PRODUCERS ON QA/QC PROGRAM (Quality Assurance)
The following manufacturers of concrete culvert pipe have VDOT approved Quality Assurance programs as
outlined in the instructions. For additions and deletions to this list contact the District Materials Engineer or
the Materials Division Physical Laboratory.
Manufacturer
Plant Location
Monitored By
Next Review Date
Foltz Concrete Pipe Co.
Winston Salem, NC
Concrete Pipe & Precast
Chesapeake, VA
Concrete Pipe & Precast
Design Rd. Ashland, VA
Concrete Pipe & Precast
Jessup, MD
Concrete Pipe & Precast
Roanoke, VA
Concrete Pipe & Precast
Salem, VA
Concrete Pipe & Precast
Manassas, VA
Foltz Concrete Pipe Co.
Winston Salem, NC
Oldcastle Precast
Fayetteville, NC
Oldcastle Precast
Raleigh, NC
Central Office
Permatile Concrete Pipe Co.
Bristol, VA
Rinker Materials
Frederick, MD
Rinker Materials
Middletown, DE
Rinker Materials
Thomasville, NC
Rinker Materials
Wilson, NC
Smith Setzer & Sons, Inc.
Catawba, NC
Smith Setzer & Sons, Inc.
Stoney Creek, VA
(*P) = Probationary
November 2015
II-A-86
List No. 27
(27) QUALIFIED SILICONE RUBBER JOINT SEALER (Chemistry Lab)
The following products have been prequalified, but the manufacturer must supply certification for each lot.
Class A
Roadsaver Part #34902
Crafco, Inc.
6165 W. Detroit Street
Chandler, AR 85226
(800) 528-8242
Dow Corning 888
Dow Corning Corp.
3901 South Saginaw Road
Midland, MI 48686
(989)496-4400
Tremco Spectrum 800
Tremco Incorporated
3777 Green Road
Beachwood, OH 44122
(216) 292-5000
Class B (for use on newly sawn or newly constructed joints only)
Roadsaver SL Part #34903
Pecora 300SL
(NTPEP, JS-2010-01-001)
Crafco, Inc.
6165 W. Detroit Street
Chandler, AR 85226
(800) 528-8242
Pecora Corp.
165 Wambold Rd.
Harleysville, PA 19438
(215)799-7557
Class C (for use in newly sawn or newly constructed joints, including joints between hydraulic cement
concrete pavement and asphaltic shoulders with no spalling of HCC edge)
Dow Corning 890 SL
Dow Corning Corp.
3901 South Saginaw Road
Midland, MI 48686
(989) 496-4400
Tremco Spectrum 900 SL
Tremco Incorporated
3777 Green Road
Beachwood, OH 44122
(216) 292-5000
SikSil 728 SL (formerly
Bondaflex)
Bondaflex Technologies
995 Towbin Avenue
Lakewood, NJ 08701
(201) 458-4146
November 2015
II-A-87
List No. 27 (cont.)
Class D (to seal expansion joints on bridge decks, where rapid curing is required).
Dow Corning 902 RCS
Dow Corning Corp.
3901 South Saginaw Road
Midland, MI 48686
(989) 496-4400
Wabo Silicone Seal
Watson Bowman Acme Corp.
95 Pineview Drive
Amherst, NY 14228
(703) 691-9239
January 2018
II-A-88
List No. 28
(28) POLYMERS FOR SEALING CRACKS IN HYDRAULIC CEMENT CONCRETE-
(Physical Lab)
Product
Type
Polymer
Manufacturer
Degadeck Crack Sealer Plus
MMA
BASF Construction Chemicals, LLC
DECKSEAL
Epoxy
SSI Construction & Industrial Materials, Inc.
Dural 50 LM
Epoxy
The Euclid Chemical Company
Dural 335
Epoxy
The Euclid Chemical Company
E-Bond 523
Epoxy
E-Bond
E-Bond 550 Hi-Mod Low Viscosity
Epoxy
E-Bond
Mark-135 Safe-T-Seal
Epoxy
Olin Epoxy-POLY-CARB (Blue Cube
Operations LLC)
Sikadur 55 SLV
Epoxy
Sika Chemical Corp.
Sikadur 35 Hi-Mod LV
Epoxy
Sika Chemical Corp.
SIL-ACT EP-700D
Epoxy
Advanced Chemical Technologies
Surepoxy HMLV
Epoxy
Kaufman Inc.
Versafill 60A/60B
Epoxy
Henkel Corporation
Crack Sealer ULV 2 Part
HMWM
(Mod)
Watson Bowman Acme
Duraguard 401-100 (Low Modulus)
HMWM
ChemMasters
Duraguard 401-3 (High Modulus)
HMWM
ChemMasters
Rhoca Gil HS-LV
HMWM
Rhone Poulenc
Rhoca Gil HS-2K
HMWM
Rhone Poulenc
Sealate T-70-MX-30 Bridge Deck Elongation
HMWM
Transpo Industries
Sika Pronto 19
HMWM
Sika Chemical Corp.
SikaPronto 19 TF
HMWM
Sika Chemical Corp.
January 2018
II-A-89
List No. 28 (cont.)
Transpo T-70 MX
HMWM
Transpo Industries
Transpo T-70 X Static Loading
HMWM
Transpo Industries
Percol Concrete Healer
Urethane
Percol Polymerics, Inc.
ROADWARE 10 Minute Concrete Mender
Urethane
Roadware Incorporated
KBP-204 P SEAL
HMWM
Kwik Bond Polymers
LEGEND:
HMWM (Mod)
High Molecular Weight Methacrylate Modified
HMWM
High Molecular Weight Methacrylate
MMA
Methyl Methacrylate
January 2018
II-A-90
List No. 29
(29) CHEMICAL / MECHANICAL ANCHORING SYSTEMS - (Physical Lab)
To have a product included on the Approved List for "Chemical / Mechanical Anchoring
Systems" the following shall be submitted to Materials Division’s Physical Laboratory
Assistant Concrete Program Manager; A Safety Data Sheet (SDS) and any Technical
Data Sheets, for the material being evulated. Also needed is a sample of material that will
be tested at a depth of.5 ½ inches. A minimum of 69,300 PSI needs to be obtained.
Upon approval the Manufacturer will be required to submit each year a notarized letter
stating that the product has not changed in formulation since initial approval.
Chemical and Mechanical Anchors are not to be used in direct tension or overhead applications.
Chemical Anchors
Manufacturer
Product
Description
Adhesives Technology
Corperation
Pompano Beach, FL
ASF-1000
A 2-component styrene free, acrylic system used for
anchoring or doweling applications in good sound
concrete using threaded rod or rebar.
HS-1CC
A two-component, high performance epoxy anchoring
system which has an application temperature range
between 40 °F to 110 °F
Ultrabond 1
Two component, 100% solids, high modulus, structural
epoxy gel. Ultrabond 1 is solvent free, no odor, high
strength moisture intensive, non-sag epoxy system.
Recommended temperature range is 35º - 115ºF.
Ultrabond 1300
A two-component, fast-setting adhesive system that
offers exceptional strength in anchoring and doweling
applications It may be used in temperatures between 40
°F - 110 °F
Ultrabond 2300
Epoxy adhesive anchors for fastening materials to
masonry items. Sets in 8 hrs. at 80F.
Ultrabond 365 CC
Ultra Bond 365 CC is a 2-component high performance
cement and silane hybrid anchoring system with an
extended installation temperature range.
Ultrabond HS-200
Two part cartridge epoxy system used to install
reinforcing steel and threaded studs. Cures in
temperatures of 32F - 100F.
Ankrtite Fastening
Systems
Tulsa, OK
Slam-Tite Hammer in
Glass Chemical
Capsule
Polyester resin and hardening agent with aggregate
filler. Minimum cure time above 68F 10 min. 50-68F
5 hrs., Store in original container at 50 to 100F.
BASF Construction
Chemicals, LLC
Building Systems
Concressive 1420
Two component 100% solids nonsag epoxy adhesive.
Mainly used for anchoring fasteners, rebar, and dowels
into concrete.
Covert Operations
Long Beach, CA
CIA Gel Epoxy
Cartridge epoxy anchoring system for dowel bars, rebars
and anchoring bolts.
January 2018
II-A-91
List No. 29(Cont.)
Chemical and Mechanical Anchors are not to be used in direct tension or overhead applications
Chemical Anchors
Manufacturer
Product
Description
Dayton Superior
Oregon, IL
Sure Anchor
Epoxy J50
Cures above 40F for use in anchoring bolts, dowels,
and. reinforcing steel 1:1 by volume, pot life 30-40
min.
Sure Anchor I
Epoxy J51
Fast epoxy anchoring system used for grouting bolts,
dowels, pins, 1:1 by volume, moisture insensitive, use
above 30F, sets in 5-10 minutes.
E-Bond
Ft. Lauderdale, FL
Hi-Mod Gel 580,
590, 592
For use in anchoring bolts dowels, and pins, injection
grouting and as a structural adhesive. Can be extended
with salt free silica aggregate mixed 1:1 by volume.
Cures to 40 F
Euclid Chemical
Kirkland, IL
Dural Fast Set Epoxy
Gel
Epoxy cartridge kit for anchoring dowel bars, rebars
and anchoring bolts. Application temperature must be
at least 35 F and rising.
Futura Companies
Scottdale, GA
Futura Bond 566R
For grouting anchoring dowels, re-bars, and bolts in
concrete. Also for bonding in external steel
reinforcing plates to concrete. For bonding concrete.
Use above 40 F.
Henkel Corporation
Fixmaster Anchor
Bolt Grout HP
Two component, 100% solids, high modulus,
structural epoxy gel. Is solvent free, no odor, high
strength moisture intensive, non-sag epoxy system.
Recommended temperature range is 35º - 115ºF.
Hilti, Inc.
Tulsa, OK
Hilti HVA Adhesive
Anchoring
Capsulated anchor for rods, dowel bars and rebar use
above 23 F. Cure time at 23 F to 32 F is 5 hours, at
68 F and above the cure time is 20 minutes.
Hilti Hit-HY 10 Plus
A two-component adhesive anchoring system for
fastenings in concrete and masonry. Prior to use see
manufacturer’s instructions for uses and precautions.
Hilti HIT-HY 200A
A two-component adhesive anchoring system
for rebar and anchor fastenings in concrete. Prior
to use see manufacturer’s instructions for uses
and precautions.
Hilti HIT-HY 200R
A two-component adhesive anchoring system
for rebar and anchor fastenings in concrete. Prior
to use see manufacturer’s instructions for uses
and precautions.
Hilti HIT-RE 100
Hilti HIT-RE 100 adhesive is an injectable, two-
component epoxy adhesive. The two components are
separated by means of a dual-cylinder foil pack
attached to a manifold. Prior to use see manufacturer’s
instructions for uses and precautions.
Hilti Hit Re 500
Two part epoxy system. Extended temperature range
from 23 to 105 F. Has a working time of 30 minutes.
January 2018
II-A-92
List No. 29(Cont.)
Chemical and Mechanical Anchors are not to be used in direct tension or overhead applications.
Chemical Anchors
Manufacturer
Product
Description
Hilti, Inc.
Tulsa, OK
Hilti HIT-RE 500 V3
Hilti HIT-RE 500 V3 adhesive is an injectable, two-
component epoxy adhesive. The two components are
separated by means of a dual-cylinder foil pack attached
to a manifold. Prior to use see manufacturer’s
instructions for uses and precautions.
Hilti HVU Adhesive
Capsule Anchoring &
Dowelling System
Urethane Methacrylate consisting of resin, hardener and
aggregate in a foil capsule. Curing time above 68 F 20
min. Curing time above 50 F 30 min., 32 F 1 hr.
Hilti HTE 50
(formerly Hilti HSE
2421)
Two part cartridge epoxy system used to install
reinforcing steel and threaded studs. Cures in
temperatures of 32F - 100F.
ITW Ramset/Red Head
Wooddale, IL
Epcon Systems
Cartridge epoxy anchor system for threaded rod and
rebar applications.
Epcon System
Acrylic 7
Two part, all weather adhesive for anchoring, dowling
and pinning applications. Can be used down to -10 F
without preheating the cartridge.
Red Head A7+
The acrylic resin and hardening agent are completely
mixed as they are simultaneously dispensed from the
dual cartridge through a static mixing nozzle, directly
into the anchor hole. A7 can be used with threaded rod
or rebar for fastening to hollow base materials.
Red Head G5+
The epoxy resin and hardener are completely mixed as
they are dispensed from the dual cartridge through a
static mixing nozzle, directly into the anchor hole.
J. Dedoes, Inc.
Milford, MI
True Grip 590
Epoxy anchoring system for grouting, anchoring bolts,
and dowel bars. Cure time is 24 hrs. at 75F.
Kaufman Products, Inc.
Baltimore, MD
Surepoxy 117 Epoxy
Anchoring System
Epoxy anchoring system for grouting, anchoring bolts,
and dowel bars. Use above 60F, pot life of 8-10 min at
75F.
Surepoxy 116 Epoxy
Anchoring System
Epoxy anchoring system for grouting, anchoring bolts,
and dowel bars. Use 40-60F, pot life of 8-10 min at
50F.
Kelken Gold, Inc.
Parlin, NJ
Keligrit
High strength, non-shrink polyester resin anchoring.
May be used in freezing Conditions down to 10 F by
keeping resin at 70 F- 90 F immediately prior to use.
Keligrout/
Keligrout 101
Polyester anchoring system for grouting anchor bolts
and dowel bars. Cure time is 48 hours at 70 F.
Kelipoxy II
Epoxy anchoring system for grouting anchor bolts and
dowel bars. Cure time is 48 hours at 77 F.
Meadow Burke
Tampa, FL
Burke E Anchor
Two part cartridge epoxy system used to install
reinforcing steel and threaded studs. Cures in
temperatures of 32F - 100F.
MKT Fastening, LLC
Lonoke, AR
Liquid ROC 300
Capsule
Capsule polyester anchor for dowel bars rebar,
anchoring bolts.
Liquid ROC 300
Twin Tube
Twin tube polyester anchor for dowel bars rebar,
anchoring bolts.
January 2018
II-A-93
List No. 29(Cont.)
Chemical and Mechanical Anchors are not to be used in direct tension or overhead applications.
Chemical Anchors
Manufacturer
Product
Description
Olin Epoxy-POLY-
CARB (Blue Cube
Operations LLC)
Mark-198.1
Two part cartridge epoxy system used to install
reinforcing steel and threaded studs. Substrate
temperature should be above 40º F. at time of
application.
PolyGem, Inc.
West Chicago, IL
PolyBac/Polyject
1257-58
Polymer anchoring system for use anchoring threaded
rods, bolts, reinforcing steel and smooth dowels to solid
concrete. Pot life at 75 F is 15 minutes.
PolyBac/Polyject
1605
Fast setting polymer anchoring system for use anchoring
threaded rods, bolts, reinforcing steel and smooth
dowels to solid concrete. Pot life at 75 F is 10 minutes.
Powers Fasteners
Brewster, NY
AC100+ Gold
Injectable two component vinylester adhesive. See
manufacturer’s instructions for uses and applications.
PE 1000+
Epoxy two component injectable adhesive. See
manufacturer’s instructions for uses and applications.
Powers Fasteners
Hammer Capsule
Hammer capsule adhesive for use in anchoring dowels,
rebars, and bolts in concrete. Base material temp. 68°F
and over,setting time1hr., 32-50°F, 5hrs.,14-23°,24 hrs.
Powers Fasteners
Power Fast Standard Set
Gel time 60 minutes at 40°F, min. cure time 16 hours,
full cure 48 hours. Do not use below 40°F.
Powers Fasteners
T308+
An injection two component epoxy adhesive. See
manufacturer’s instructions for uses and applications.
Pure 50+
A two-component adhesive anchoring system. See
manufacturer’s instructions for uses and applications.
Pure 110+
A two-component adhesive anchoring system. See
manufacturer’s instructions for uses and applications.
Pure GP
Pure GP is a two-component adhesive anchoring system
designed for bonding threaded rod or reinforcing bar
into drilled holes in solid concrete base. Prior to use see
manufacturer’s instructions for uses and precautions.
Schul International Co.
Norcross, GA
Anchor Loc
Cartridge epoxy dowel bar anchoring system.
Sika Corp.
Lyndhurst, NJ
Anchor Fix-1
High performance, two component, adhesive anchoring
system for threaded rod and reinforcing steel in
uncracked concrete.
Anchor Fix 2
High performance, two component, adhesive anchoring
system for threaded rod and reinforcing steel in
uncracked concrete.
Sikadur Anchor Fix 500
High performance, two component, adhesive anchoring
system for threaded rod and reinforcing steel in
uncracked concrete for transportation applications..
Sikadur AnchorFix 3001
High performance, two component, adhesive anchoring
system for threaded rod and reinforcing steel in both
cracked and uncracked concrete.
List No. 29 (cont.)
January 2018
II-A-94
Chemical and Mechanical Anchors are not to be used in direct tension or overhead applications.
Chemical Anchors
Manufacturer
Product
Description
Sika Corp.
Lyndhurst, NJ
Sikadur Injection Gel
A two component, moisture tolerant, high modulus, high
strength, structural epoxy which give a smooth,
nonabrasive paste adhesive for bolts, dowels, pins and
special fasteners.
Simpson Strong-Tie Co.,
Inc.
Colmbus OH
AT Acrylic
A high strength acrelic based anchoring system
formulated for use as a high strength anchor-grouting
material in a wide range of temperature conditions.
AT-XP
An injectible two component acrylic based adhesive that
is mixed at a ten to one volume ratio of resin to initiator.
ET-HP
A two component, high-solids, epoxy based system for
use as a high strength, non-shrink anchor grouting
material.
EDOT
Two component high-solids epoxy based system that is
non-shrink anchor grouting material. See
manufacturer’s instructions for uses and applications.
SET
A high-strength, non-shrink, epoxy-based adhesive
formulated for anchoring and doweling threaded rod or
rebar
SET XP
An injectible two component 100 percent solids, epoxy
based adhesive that is mixed at a one to one volume ratio
of resin to hardner.
Superior Epoxies
Coatings, Inc.
Lilburn, GA
DBA-5
Epoxy gel anchor system for dowel bars, rebars,
anchoring bolts, and bonding hardened concrete to other
materials Mix 1:1 by volume. Apply above 33 F.
W. R. Meadows
Austell, GA
Rezi-Weld Rapid
Set Epoxy Anchor
System
Epoxy anchoring system used for dowels, bars, and
anchoring bolts. Pot life at 73 F is 10 min.
Unisorb, Inc.
Jackson, MI
Unisorb Capsule
Anchor
Urethane adhesive anchor for grouting bolts, dowels,
and pins. Glass encapsulated package may be used in
wet or damp conditions. Sets in 30 min. at room
temperature.
Unitex
Kansas City, MO
Propoxy 300 Fast
Fast epoxy anchoring system used for grouting bolts,
dowels, pins, structural bonding of concrete, masonry,
metal, and wood. 2 component 1:1 mix by volume,
moisture insensitive use above 30 F sets 5-10 min.
Propoxy 300
Epoxy anchoring system used for grouting bolts,
dowels, pins, structural bonding concrete and masonry.
2 component epoxy, mix 1:1 by volume Use between
65-85 F Pot life above 30 min.
X-Calibur Construction
Systems, Inc.
Miramar, FL
X-Tite ResiLoc EX22
Two components, 100% solids, high modulus, structural
epoxy gel. X-Tite ResiLoc EX22 is solvent free, no odor
high strength moisture intensive, non-sag epoxy system.
Recommended Temperature range is 35°F - 115°F.
List No. 29(Cont.)
Chemical and Mechanical Anchors are not to be used in direct tension or overhead applications.
January 2018
II-A-95
Mechanical Anchors
Manufacturer
Product
Description
Drillco Devices, Ltd
Long Island City, NY
Drillco Maxi-Bolt
Expansion anchor
Hilti, Inc.
Tulsa, OK
Hilti Kwik Bolt II
Expansion Anchor.
Expansion Anchor Bolt
Hilti Kwik Bolt 3 Expansion
Anchor
Expansion Anchor Bolt
Hilti HDI Anchor
Flush mount drop in expansion anchor.
ITS Ramset Redhead
Tru Bolt Wedge Anchors
Anchor bodies are made of plated
carbon steel, hot-dipped galvanized
carbon steel, type 304 stainless
steel or type 316 stainless steel.
Liebig International, Inc.
Charlottesville, VA
Liebig Safety Bolts
Concrete expansion anchor
MKT Fastening, LLC
Lonoke, AR
Sup-R-Stud
Expansion anchor bolt
Powers Fasteners, Inc.
Brewster, NY
Power-Bolt
Expansion Anchor Bolt
Power-Stud
Expansion Anchor Bolt
Wedge-Bolt
Screw Anchor
Simpson Strong-Tie Co.,
Inc.
Colmbus OH
Drop-In
Expansion shell anchors for use in solid
base materials featuring a positive-set
marking indicator at the top of the anchor to
see clearly when proper installation has
taken place.
Sleeve-All
Expanding sleeve anchors for use in all
types of solid base materials.
Titen HD
A high strength screw anchor for use in
cracked or uncracked concrete or uncracked
masonry.
Wedge-All
A non-bottom bearing wedge style
expansion anchor in solid concrete or grout
filled masony.
January 2018
II-A-96
List No. 30
(30) HYDRAULIC CEMENT CONCRETE SEALANTS, STAINS, AND COATINGS - (Physical
Lab)
To have a product included on the Approved List for "Hydraulic Cement Concrete Sealants, Stains and
Coatings" the following shall be submitted to Materials Division’s Physical Laboratory Assistant Concrete
Program Manager. The Materials Safety Data Sheet (MSDS), Technical Data Sheets, Independent
laboratory data demonstrating the material will meet the following, maximum weight loss allowed shall be
7% with a minimum durability factor of 60%. The maximum surface rating allowed shall be 3, when tested
to ASTM C-666 for 300 cycles using Method A modified with 2% Sodium Chloride compliance to the
specification.
If the material is to be tested by VDOT, then a quart of the material and the application tool (Paint brush,
paint roller or etc.) is needed. The test the evaluation period for this material is usually between 6 - 12
months. The material will be tested to ASTM C 666 for 300 cycles using Method A modified with 2%
Sodium Chloride. The maximum weight loss allowed shall be 7% with a minimum durability factor of
60%. The maximum surface rating allowed shall be 3.
Upon approval, the Manufacturer will be required to submit each year a notarized letter stating that the
product has not changed in formulation since initial approval.
Manufacturer
Product
Description
VOC Level
Advanced Chemical
Technologies
Oklahoma City, OK
Sil-Act ATS 42*
Can be applied to the surface by low-
pressure spray, brush, roller or squeegee. It
bonds with the substrate forming a
penetrated layer below the surface that acts
as a one-way filter. Water, chloride and other
waterborne contaminants are repelled
without restricting the substrates natural
vapor permeability.
*589 g/l
BASF Construction
Chemicals, LLC
Masterinject 1000
A two component ultra-low viscosity epoxy
sealer and structural adhesive. Its low
viscosity formula penetrates deeply into
concrete to repair damaged structures. It
accepts an aggregate broadcast to provide a
slip-resistant surface.
0 g/L
MasterProtect H 400
A water-based, 40% alkylalkoxysilane
penetrating sealer. It provides long lasting
protection against moisture intrusion,
freeze/thaw cycles, and chloride intrusion.
<350 g/L
MasterProtect HB 400
A water-based, high-build, 100% acrylic
waterproof coating for above-grade
concrete, masonry, stucco and EIFS.
107 g/L
MasterProtect HB 400
DOT
A water-based, high-build, 100% acrylic
waterproof coating for above-grade
concrete, masonry, stucco and EIFS.
58 g/L
MasterSeal 584
A cement based, waterproof coating for
concrete, brick, or block. It can be used
to eliminate the look of mortar joints and
textured by both spray and trowel
0 g/L
*Non-Compliant in Arlington, Fairfax, Loudoun, Prince William, and Stafford Counties
January 2018
II-A-97
List No. 30(Cont.)
(30) HYDRAULIC CEMENT CONCRETE SEALANTS, STAINS, AND COATINGS (cont.)
Manufacturer
Product
Description
VOC Level
Chem-Crete
Corporation
Richardson, TX
Chem-Crete Pavix
CCC100
A unique water-based penetrating product
that permanently seals concrete from
moisture erosion. It is 100% safe for the
environment, protects reinforcing steel bars
against corrosion without any negative effect
on existing steel cathodic protection, no
VOC’s, used as a single application.
0g/L
ChemMasters
Madison, OH
Aquanil Plus 40-A
A penetrating, chemically reactive solvent
based sealer that repels moisture and water
from concrete and masonry, is non-etching,
will not harm most uncoated glass or metal
frames, and leaves no residue to clean.
<250 g/L
Silencure A
A pure acrylic copolymer curing and
sealing compound for new concrete
installations. Forms an effective curing and
sealing film that penetrates capillary pores
of fresh concrete forming a silicone matrix
within the concrete preventing water and
salt penetration.
<350 g/L
Textured DOT
Water based high build 100% acrylic
decorative coating. Develops a tough,
durable, water repellent film that is alkali,
acid, mildew, fungus and mold resistant.
Crescent Industries
Union, SC
CoatMasters Anti-
Graffiti Coating
A modified silicon acrylic systems, which
exhibit high water repellency upon cure,
provide long term protection from
efflorescence, and provide additional stain
resistance. Quick drying, non-yellowing,
and provide excellent protection from
various water solutions, acids, alkalis,
fumes, and ultraviolet degradation.
<100 g/l
E-Bond Epoxies, Inc
Ft. Lauderdale, FL
E-Bond 120
Epoxy penetrating sealer for concrete. Mix
1:1 by volume, tack free time at 77F is 45
min. Use above 40F.
The Euclid Chemical
Company
Kirkland, IL
Aquastain T-96
A penetrating, decorative, water-based,
liquid polymer stain. It resists ultraviolet
degradation, airborne dirt, smog, industrial
fumes, acid rain and most other atmospheric
chemicals.
<100 g/L
Tammscoat
Water based emulsion of 100% acrylic resin
polymer. Textured decorative & protective
coating. Apply at surface, ambient
temperatures between 45-90F.
<100 g/L
*Non-Compliant in Arlington, Fairfax, Loudoun, Prince William, and Stafford Counties
January 2018
II-A-98
List No. 30(Cont.)
(30) HYDRAULIC CEMENT CONCRETE SEALANTS, STAINS, AND COATINGS
Manufacturer
Product
Description
VOC Level
Evonik Industries
Protectosil AQUA-
TRETE 40
A clear penetrating, water repellent for use
on concrete. A ready-to-use, low VOC,
silane emulsion. Penetrates the substrate
and chemically bonds with silica to form a
permanent attachment of the water repellent
molecule.
350 g/L
Protectosil 300
A solvent-free silane with a corrosion
inhibitor that protects against corrosion of
steel reinforcement. Acts as a mixed
inhibitor effectively working on both anodic
and cathodic corrosion sites.
340 g/L
Fox Industries
Baltimore, MD
*FX 430
Fox Industries Concrete stain and coating.
Acrylic copolymer in clear, white, grey and
colors, apply at 300 sq/ft/gal.
* 675 g/l
FX 432
Polymer modified penetrating sealer for
concrete. One component water based.
Apply at a rate of 200-300 sq. ft./gal with
brush, roller or spray.
0.0 g/L
FX-441
Anti-Graffiti Aliphatic Urethane two part
system: one component top coat and second
component top coat apply at 300 square
ft/gal apply above 40°F.
340 g/l
Kaufman Products
Baltimore, MD
*Sure-Poxy Penetrating
Epoxy penetrating sealer. Mix 1:1 by vol.
apply 150 sq. ft./gal/coat. Pot life 70F is 24
hours, apply above 50F.
*610 g/l
Northern Industries Inc.
Coventry, RI
.
Hydro-Seal 75
A spray able high build water-based epoxy
coating that protects & preserves concrete,
masonry and block surfaces and contains no
VOC’s. Resists chemical attack, freeze thaw
spalling and hydro-static pressure in excess
of 40 PSI. Provides a decorative, smooth
long lasting finish that is waterproof and
highly durable. Apply above 40 degrees F.
0 g/L
Professional Products
of Kansas, Inc.
Wichita, Kansas
Professional Water
Sealant Super Strength
One part, One coat penetrating, permanent
weather proofing formula using RTV
Silicone Rubber.
<250 g/l
Prosoco, Inc
Lawrence, KS
SaltGuard WB
Water based siloxane water repellent and
chloride screen
<120 g/L
Sure Klean Weather
Seal H-40
Protective silane coating apply 40-95F.
Surtreat Holding LLC
Pittsburg, PA
Surtreat TPS II
A multi-phase, inorganic, surface applied
corrosion inhibitor for use on hardened
concrete. It will protect reinforcing steel by
forming a passivating film on the steel
surface, thereby extending the service life of
the structure.
0 g/L
*Non-Compliant in Arlington, Fairfax, Loudoun, Prince William, and Stafford Counties
January 2018
II-A-99
List No. 30(Cont.)
(30) HYDRAULIC CEMENT CONCRETE SEALANTS, STAINS, AND COATINGS
Manufacturer
Product
Description
VOC Level
Sherwin-Williams
Richmond, VA
Anti-Graffiti Coating
B97C00150
A single component, non-sacrificial, ready-
to-use siloxane coating that cures with
atmospheric moisture. Intended for use over
properly prepared colored or bare concrete
surfaces. Excellent clean ability with either
water power-washing, or solvent wipe.
< 250 g/l
H & C Colortop Water
Based Solid Color
Concrete Stain
A low odor, water based stain that provides
a long-lasting, durable and decorative finish
on interior and exterior concrete and
masonry
222 g/L
*H & C Colortop
Solvent Based Solid
Color Concrete Stain
Solvent based concrete stain formulated with
acrylic and silicone resins and alkali proof
pigments.
*575 g/l
Ultracrete Solvent
Borne Textured Coating
B46W800 series
A low VOC textured coating designed for
use on concrete such as poured-in-place
concrete and pre-cast concrete, to improve
aesthetics. Available as a smooth finish or in
fine, medium and extra-coarse textures.
396g/l
Ultracrete Textured
Coating
A44W800 series
A heavy duty, VOC compliant, 100% acrylic
aggregate-filled coating with outstanding
color retention and durability. It can be used
directly over numerous substrates.
55g/l
Sika Corporation
Lyndhurst, NJ
Sikagard 705L
A one part low viscosity, solvent free,
reactive impregnation for concrete and
cementitious substrates.
100 g/l
Sikagard 701W
Solvent-free siloxane emulsion concentrate.
Coverage 100-250 sq.ft./gal. Mix ratio = 1
part to 4 parts water.
193 g/L
Textured Coatings of
America, Inc
Ft. Lauderdale, FL
Rainstopper 400*
Semi-transparent solvent free resin sealer.
Covers 125 sq/ft/gal.
* 600 g/l
Texcote XL 70*
One component ready to use concrete
protective coating. Application temperature
40-100F.
* 600 g/l
Texcote 300 Bridgecote
High build latex acrylic coating. Rapid
drying, good adhesion. Covers 1.25 m²/L at
40-100 F.
300 g/L
United Coatings
Spokane, WA
Canyon Tone Stain
Pigmented stain for coloring and protecting
concrete, Acrylic copolymer Apply at
150sq.ft./gal., 40-90F.
163 g/L
*Non-Compliant in Arlington, Fairfax, Loudoun, Prince William, and Stafford Counties
January 2018
II-A-100
List No. 30(Cont.)
(30) HYDRAULIC CEMENT CONCRETE SEALANTS, STAINS, AND COATINGS
Manufacturer
Product
Description
VOC Level
Vexcon Chemicals, Inc
Philadelphia, PA.
Certi-Vex
EnvioSmooth VOC
Decorative smooth high-build coating that
covers surface blemishes and cracks.
Provides excellent adhesion, weatherability
and waterproofing of concrete, masonry,
block, wood and primed metal surfaces.
Apply to green concrete without peeling or
loss of adhesion, excellent resistance to UV
light, molds or fungi and environmental
chemicals.
296 g/L
Certi-Vex EnvioTex
VOC Textured Sand
Decorative textured high-build coating that
covers surface blemishes and cracks.
Provides excellent adhesion, weatherability
and waterproofing of concrete, masonry,
block, wood and primed metal surfaces.
Apply to green concrete without peeling or
loss of adhesion, excellent resistance to UV
light, molds or fungi and environmental
chemicals.
296 g/L
Certi-Vex Guard
CACS (Gray)
A decorative colored one step cure and
penetrating water repellent sealer with
excellent stain protection that can be applied
to fresh or existing horizontal and vertical
concrete surfaces in one application.
385 g/L
Certi-Vex Guard
A clear one step cure and penetrating water
repellent sealer with excellent stain
protection that can be applied to fresh or
existing horizontal and vertical concrete
surfaces in one application.
326 g/L
Certi-Vex Penseal 244
A premium high performance, breathable,
efficient VOC penetrating clear water
repellent sealer.
<250 g/l
Powerseal 40
A premium high performance industrial and
commercial grade breathable, efficient
waterborne penetrating water repellent sealer
for new or existing concrete and masonry
surfaces.
<100 g/l
*Non-Compliant in Arlington, Fairfax, Loudoun, Prince William, and Stafford Counties
List No. 30(Cont.)
(30) HYDRAULIC CEMENT CONCRETE SEALANTS, STAINS, AND COATINGS
January 2018
II-A-101
Manufacturer
Product
Description
VOC Level
Visual Pollution
Technologies
Scottsdale, AZ
Graffiti-Pruf
Completely non-toxic liquid, water-based
emulsion used for protecting Surfaces from
graffiti, atmospheric Pollution and corrosion.
Apply only when ambient and surface
temperatures are above 40F.
0 g/l
Prmakote
One step application no thinning or mixing.
Dries and protects in 24 hours. Retards the
growth of mold, mildew and algae. Apply
300 to 600 square ft/ gallon depending on the
surface.
220 g/l
January 2018
II-A-102
List No. 31
(31) HYDRAULIC CEMENT CONCRETE REPAIR MATERIALS (Physical Lab)
The following lists of products are approved for use in repair of hydraulic cement concrete. These concrete
repair materials meet the requirements of VTM 132 for repair of class A3, A4 or A5 concrete.
Table I repair materials are for repair of A3 Concrete Items
Table II repair materials are for repair of A4 Concrete Items.
Table III repair materials are for repair of A5 Concrete Items.
Products in Table III can also be used to repair A5, A4 and A3 concrete items. Products in Table II can be
used to repair A4 and A3 concrete items. Product listed in Table I can only be used to repair A3 concrete
items.
Products will be assigned to the highest table in which all the specifications are met.
All packaged, dry, rapid hardening repair materials shall meet the requirements of ASTM C 928, Section 4-
Chemical Composition.
Table I - A3
Approved concrete repair materials for A3 Concrete and miscellaneous concrete Items
Product
Manufacturer
Description
Test Results
All Approved
concrete repair
materials for A4 and
A5 concrete items
listed in Table II and
Table III.
HD 50
Dayton Superior
Corporation
A fast setting, fiber reinforced,
latex-modified, shrinkage
compensated, heavy duty, one
component concrete repair
material requiring only water
to mix and apply. HD 50 is a
cement based compound
having similar characteristics
to normal portland cement
mixes and is compatible with
portland cement concrete.
Setting Time
Initial 25 min.
Final 28 min.
Compressive Strength
2 hrs. 3,860
4 hrs. 4,910
6 hrs. 4,990
24 hrs. 5,630
28 days 8,640
HD 25VO
Dayton Superior
Corporation
A high strength mortar
containing Portland cement,
special polymers and
accelerators to provide an
accelerated strength gain and
set time. HD 25 VO is a
single component, fiber
enhanced trowelable material
formulated for vertical and
overhead repairs of concrete.
Setting Time
Initial 18 min.
Final 20 min.
Compressive Strength
2 hrs. 3,650
4 hrs. 4,620
6 hrs. 5,020
24 hrs. 5,570
28 days 7,730
January 2018
II-A-103
List No. 31 (cont.)
Approved concrete repair materials for A3 Concrete and miscellaneous concrete Items (cont.)
Product
Manufacturer
Description
Test Results
Pave Patch 3000
Dayton Superior
Corporation
A fast setting, heavy duty, one
component concrete repair
material requiring only water
to mix and apply. A cement
based compound having
similar characteristics to
normal portland cement mixes
and is compatible with
portland cement concrete.
Setting Time
Initial 20 min.
Final 24 min.
Compressive Strength
2 hrs. 5,470
4 hrs. 6,040
6 hrs. 6,270
24 hrs. 7,140
28 days 9,800
January 2018
II-A-104
List No. 31 (cont.)
Table II - A4
Approved concrete repair materials for A4 Concrete Items
Product
Manufacturer
Description
Test Results
All Approved
concrete repair
materials for A5
concrete items listed
in Table III.
Commercial Grade
FastSet DOT Mix
The Quikrete Companies
A fiber reinforced, rapid-
setting repair material
specifically designed for a
high-performance repair
material. 55 lb. bag can be
extended.
Setting Time
Initial
Final
Compressive Strength
1.5 hrs. 5020
28 days 8490
Commercial Grade
FastSet DOT Mix
Extended
The Quikrete Companies
A fiber reinforced, rapid-
setting repair material
specifically designed for a
high-performance repair
material. 80 lb. bag already
extended.
Setting Time
Initial
Final
Compressive Strength
1.5 hrs. 2780
28 days 6160
Duracrete II FT
Kaufman Products Inc.
Very rapid setting, non-
staining, and non-metallic
cementitious repair mortar.
Setting Time
Initial 11 min.
Final 14 min.
Compressive Strength
2 hrs. 4480
4 hrs. 4730
6 hrs. 5220
24 hrs. 5030
28 days 8980
EucoRepair SCC
The Euclid Chemical
Company
A versatile, one component,
self-consolidating repair
mortar that is shrinkage-
compensated, polymer and
microfiber modified, and
contains an integral corrosion
inhibitor.
Setting Time
Final 5 hrs. 10 min.
Compressive Strength
2 hrs. no strength
4 hrs. no strength
6 hrs. no strength
24 hrs. 3,060
28 days 6,280
EucoRepair V100
The Euclid Chemical
Company
A single-component, quick-
setting, low shrinkage repair
mortar for trowel applied
vertical and overhead repairs
requiring.
Setting Time
Initial 11 min.
Final 14 min.
Compressive Strength
6 hrs. 3080
28 days 5070
Planitop 18 ES
MAPEI
A one component,
cementitious repair mortar
with a corrosion inhibitor. It is
suited for horizontal concrete
repairs.
Setting Time
Initial 55 min.
Final 60 min.
Compressive Strength
6 hrs. 5,870
28 days 9,410
January 2018
II-A-105
List No. 31 (cont.)
Table III - A5
Approved concrete repair materials for A5 Concrete Items
Product
Manufacturer
Description
Test Results
ChemPatch Fast VO
ChemMasters
A one component, polymer
modified shrinkage
compensated, very fast setting,
non-shrink repair mortar with
fiber and corrosion inhibitor.
Setting Time
Initial 17 min.
Final 19 min.
Compressive Strength
1 day 6,500
28 days 9,060
Duracrete II VOFT
Kaufman Products Inc.
A single-component, rapid
setting, vertical/overhead,
cement based repair mortar for
concrete.
Setting Time
Initial 26 min.
Final 34 min.
Compressive Strength
2 hrs. 2,490
4 hrs. 3,110
6 hrs. 3,350
24 hrs. 3,640
28 days 6,290
HiCap FT
Kaufman Products Inc.
A patching and finishing
compound that can be
featheredged or shaved to the
desired shape, after achieving
an initial set.
Setting Time
Initial 20 min.
Final 34 min.
Compressive Strength
2 hrs. 1,820
4 hrs. 2,370
6 hrs. 2,780
24 hrs. 4,440
28 days 7,400
Planitop 11 SCC
MAPEI
A one component cementitious,
self-consolidating polymer
modified concrete mix pre
extended with coarse aggregate.
Setting Time
Initial 7 hrs. 30 min.
Final 9 hrs. 50 min.
Compressive Strength
28 days 12,250
Planitop 12 SR
MAPEI
A sulfate resistant one
component, shrinkage
compensated cementitious
repair mortar. Fiber reinforced,
contains both silica fume and a
corrosion inhibitor and is
intended for the repair of
vertical, overhead and
horizontal concrete surfaces.
Setting Time
Initial 225 min.
Final 400 min.
Compressive Strength
28 days 9,100
Planitop 15
MAPEI
A one component, shrinkage
compensated cementitious,
fiber reinforced fluid mortar.
Contains a corrosion inhibitor
and silica fume and is well
suited where followability is
required.
Setting Time
Initial 185 min.
Final 370 min.
Compressive Strength
6 hrs. 3,370
28 days 12,290
January 2018
II-A-106
List No. 31 (cont.)
Approved concrete repair materials for A5 Concrete Items (Cont.)
Product
Manufacturer
Description
Test Results
Planitop X
MAPEI
A one component, fiber
reinforced, shrinkage
compensated, high early
strength, fast setting polymer
modified high build
cementitious repair mortar with
corrosion inhibitor.
Setting Time
Initial 13 min.
Final 22 min.
Compressive Strength
2 hrs. 2390
28 days 7400
Planitop XS
MAPEI
An extended working time
variation of Planitop X.
Shrinkage compensated, fiber
reinforced, polymer modified
and containing a proprietary
corrosion inhibitor.
Setting Time
Initial 34 min.
Final 49 min.
Compressive Strength
6 hrs. 2090
28 days 7040
Rapid Set DOT
Concrete Mix
CTS Cement
Manufacturing Corp.
A high-performance,
polymer-modified,
fast-setting, fiber reinforced
concrete repair material.
Durable in wet
environments,
Setting Time
Initial 30 min.
Final 50 min.
Compressive Strength
2 hrs. - 4,380
4 hrs. - 7,100
6 hrs. - 8,360
24 hrs. - 6,170
28 days - 7,520
Rapid Set DOT
Repair Mix
CTS Cement
Manufacturing Corp.
A high performance, fast
setting, multipurpose repair
material, durable in wet
environments.
Setting Time
Initial 46 min.
Final 51 min.
Compressive Strength
2 hrs. - 6,980
4 hrs. - 7,580
6 hrs. - 8,340
24 hrs. - 9,900
28 days 13,370
RepCon 928
SpecChem, LLC
A single component concrete
repair mortar with integral
corrosion inhibitor for use on
concrete
floors, highway pavements,
bridge decks.
Setting Time
Initial 23 min.
Final 35 min.
Compressive Strength
3 hrs. 5210
28 days 11940
SikaQuick 211 SCC
Plus
Sika Corporation
A one-component, self
consolidating concrete
containing factory blended
coarse aggregate. This self
consolidating concrete bag is
silica fume and polymer
modified and also contains a
migrating corrosion inhibitor.
Setting Time
Initial 28 min.
Final 70 min.
Compressive Strength
2 hrs. no measurable
strength
4 hrs. no measurable
strength
6 hrs. no measurable
strength
24 hrs. 2,500
28 days 9,050
January 2018
II-A-107
List No. 31 (cont.)
Approved concrete repair materials for A5 Concrete Items (Cont.)
Product
Manufacturer
Description
Test Results
SikaQuick 2500
Sika Corporation
A 1-component, very rapid
hardening, early strength
gaining, cementitious, patching
material for concrete
Setting Time
Initial 32 min.
Final 57 min.
Compressive Strength
2 hrs. 3,563
4 hrs. 4,612
6 hrs. 4,856
24 hrs. ,6,006
28 days 7915
SikaQuick VOH
Sika Corporation
A fast setting, one component,
ready-to-use repair mortar for
vertical and overhead
applications using specialty
cement blends.
Setting Time
Initial 12 min.
Final 25 min.
Compressive Strength
2 hrs. 2,120
4 hrs. 4,750
6 hrs. 5,580
24 hrs. 5,100
28 days 9,040
Tamms Form and
Pour
The Euclid Chemical Co.
Cleveland, OH
A flow able, one component,
polymermodified cementitious
repair mortar containing silica
fume and a migratory corrosion
inhibitor.
Setting Time
Initial 55 min.
Final 60 min.
Compressive Strength
1 day 7364
28 days 11,968
To have a product included on this Approved List, the manufacturer shall submit a signed and notarized
letter to Materials Division’s Physical Laboratory Assistant Concrete Program Manager stating that the
material meets the requirements listed in VTM 132 for A3, A4 and/or A5 concrete repair material.
Accompanying this letter must be independent laboratory data demonstrating compliance to the
specification, a Safety Data Sheet (SDS) and Technical Data Sheets. Upon approval the Manufacturer will
be required to submit a letter each December for the upcoming year, the notarized letter must state that the
concrete repair material meets the requirements of VTM 132 for A3, A4 and/or A5 and that the product has
not changed in formulation since initial approval showing it will meet the following requirements. VDOT
Material’s Division reserves the right to check any product on this list.
VTM 132 can be found at the following link;
http://www.virginiadot.org/business/resources/Materials/bu-mat-VTMs.pdf
August 2015
II-A-108
List No. 32
(32) STABILIZERS FOR ASPHALT MIXTURES (Asphalt Lab)
Product
Minimum
Manufacturer
Gilsonite HMA Modifier
Replaces 8% by weight of asphalt
American Gilsonite Co.
Ziegler Chemical & Mineral Co.
Trinidad Lake Asphalt
Replaces 25% by weight of
asphalt
Trinidad Asphalt Co. of America
BoniFibers
6 pounds per ton of total mix
Kapejo, Inc
Petroflex 402-1N
6 pounds per ton of total mix
GRC Materials Co.
Fiber Pave 3010
6 pounds per ton of total mix
Fiberized Products
P440 Natural Fibers
6 pounds per ton of total mix
Advanced Fiber Solutions
August 2010
II-A-109
List No. 33
(33) SHOTCRETE/GUNITE MIXTURES (Physical Lab)
Product
Manufacturer
Eucoshot
Silica fume, modified shotcrete
Euclid Chemical Co.
Cleveland, OH
Eucoshot F
Silica fume, modified with polypropylene
reinforcing fibers.
Euclid Chemical Co.
Cleveland, OH
Eucoshot FM
Silica fume, modified with polypropylene fibers
Euclid Chemical Co.
Cleveland, OH
Eucoshot Supreme
Latex modified shotcrete
Euclid Chemical Co.
Cleveland, OH
FX-288 Micro Silica Fiber
Reinforced Shotcrete Mortar
Fox Industries
Baltimore, MD
ProSpec Shotcrete 300
Portland cement, well graded aggregates,
microsilica and special additives to improve
adhesion and reduce rebound.
Bonsal American
Charlotte, NC
St. Albans, WV
White Marsh, MD
ProSpec Shotcrete 300V
Portland cement, well graded aggregates
microsilica and polypropylene fibers.
Bonsal American
Charlotte, NC
St. Albans, WV
White Marsh, MD
Quikrete Shotcrete MS
With polypropylene fibers
The Quikrete Companies
Lawrenceville, GA
ShotPatch 21F
Silica fume enhanced, fiber reinforced shotcrete
BASF Construction Chemicals, LLC
Shakopee, MN
SikaCem 103
Sika Corp.
Richmond, VA
SureShot Shotcrete
Portland cement, specially proportioned aggregates
microsilica and polypropylene fibers.
Kaufman Products, Inc.
Baltimore, MD
November 2017
II-A-110
List No. 34
(34) CONCRETE PRECAST PRODUCERS ON QA/QC PROGRAM (Quality Assurance)
The following manufacturers of concrete precast products have VDOT approved Quality Assurance programs as
outlined in the instructions. For additions or deletions to this list contact the District Materials Engineer or the
Materials Division Physical Laboratory.
Manufacturer
Plant Location
Monitored By
Probation Start
Date
A. C. Miller
Blairsville, PA
Allied Concrete Company (Redi-Rock,
Stone Strong) (*P)
Waynesboro, VA
11/20/17
American Stone Virginia, LLC (*P)
Ladysmith, VA
9/17/15
Boxley (ReCon) (*P)
Blue Ridge, VA
Century Concrete, Inc.
Virginia Beach, VA
Coastal Precast Systems, LLC
Chesapeake, VA
Concrete Pipe & Precast
Va. Precast Rd., Ashland, VA
Concrete Pipe & Precast
Chesapeake, VA
Concrete Pipe & Precast
Greencastle, PA
Concrete Pipe & Precast
Design Rd., Ashland, VA
Concrete Pipe & Precast
Harrisonburg, VA
Concrete Pipe & Precast
Jessup, MD
Concrete Pipe & Precast
Manassas, VA
Concrete Pipe & Precast
Martinsburg, WV
Concrete Pipe & Precast
Salem, VA
Concrete Pipe & Precast
Dunn, NC
Concrete Safety Systems
Bethel, PA
Concrete Specialties, Inc. (CSI)
Roanoke, VA
Contractors Precast Corp.
Davidsonville, MD
Curtis Contracting, Inc.
West Point, VA
DOT Concrete and Precast L.L.C.
Pennington Gap, VA
Eastern Vault
Princeton, WV
Faddis Concrete Products
Downingtown, PA
Faddis Concrete Products
King George, VA
Faddis Concrete Products
Kutztown, PA
Faddis Concrete Products
New Castle, PA
Foltz Concrete Pipe
Winston Salem, NC
Gillespie Precast Plant 1
Chestertown, MD
7/19/17
Gillespie Precast Plant 2
Chestertown, MD
7/19/17
Heartland Concrete
Petersburg, VA
K. J. Williams Concrete Co., Inc.
Cresaptown, MD
Lindsay Precast
Franklinton, NC
Mack Industries, Inc.
Sharpsburg, NC
Miscellaneous Concrete Products
Roanoke, VA
Nansemond Precast Concrete Co.
Suffolk, VA
Oldcastle Precast (**P)
Fredericksburg, VA
9/20/13
Oldcastle Precast
Fuquay-Varina, NC
Central Office
Permatile Concrete Products Co.
Bristol, VA
Rinker Materials
Frederick, MD
Rinker Materials
Middletown, DE
Rockingham Precast
Harrisonburg, VA
Ross Prestress (*P)
Bristol, TN
Bristol
01/19/2018
Smith Carolina Corporation
Reidsville, NC
Smith Midland Corporation
Midland, VA
November 2017
II-A-111
Manufacturer
Plant Location
Monitored By
Probation Start
Date
Stonewall Precast, Inc.
Woodstock, VA
Terre Hill Concrete Products
Lebanon, PA
Tindall Corporation (*P)
Spartanburg, SC
Winchester Building Supply Co.
Winchester, VA
(*P) = Probationary (**P) = Probation with Cause
June 2016
II-A-112
List No. 35
(35) FIBERS FOR USE IN HYDRAULIC CEMENT CONCRETE (Physical Lab)
Blended Copolymer
Supplier
Phone Number
The Euclid Chemical Company (TUF STRAND
MAXTEN)
(706) 638-0055
Steel Fibers
Supplier
Phone Number
Bekart Wire Co (RC 80/60 BN)
(770) 514-2286, Contact: Heidi Helmink
Bekart Wire Co (RC 65/60 BN)
(770) 514-2286, Contact: Heidi Helmink
Maccaferri Inc
(301) 223-6910
Polytorx, LLC (Helix)
(734) 322-2114
Polypropylene Fibers
Supplier
Phone Number
Advanced Fiber Solutions, Inc. (Fibrillated)
(800) 351-5410
Advanced Fiber Solutions, Inc. (Monofilament)
(800) 351-5410
Advanced Fiber Solutions, Inc. (Ultimax Structural
Fibers)
(800) 351-5410
Durafiber
(804) 371-7252
FiberMesh
(800) 621-1273
Forta
(412) 458-5221
The Euclid Chemical Company (PSI Fiberstrand 100)
(800) 321-7628
The Euclid Chemical Company (PSI Fiberstrand F)
(800) 321-7628
W. R. Grace
(617) 876-1400
Polyolefin
Supplier
Phone Number
3M
Polyester
Supplier
Phone Number
*Approval does not grant permission to reduce steel requirements.
August 2016
II-A-113
List No. 36
(36) MULCHES (HECP TYPES 1 THRU 4) (Maintenance Div.)
List # 36 on Mulches has been updated and moved to List (79)
MULCHES (Hydraulic Erosion Control Products TYPES 1-4) as of
August 2016
July 2016
List No. 37
(37) WALL DRAIN SYSTEMS (Soils Lab)
As of July 1, 2016, this Approved List is now included in Approved List No. 63.
January 2018
II-A-115
List No. 38
(38) PIPE REHABILITATION SYSTEMS FOR METHOD D (FLEXIBLE PIPE LINER) (Soils Lab)
VDOT’s Drainage Manual Chapter 8 and VDOT’s Special Provision for Pipe Rehabilitation list Methods A through E
for pipe rehabilitation.
This Approved List 38 is for Method D (Flexible pipe liner) systems only. Method D is divided into 4 categories of
products as shown below:
Category A Cured in Place Pipe (CIPP)
Category B Fold and form flexible liners
Category C HDPE, PVC, or Polypropylene (PE) slip liners
Category D Spray-on liners
Flexible pipe liner products falling in any of these 4 categories shall be on this Approved List in order to be used on
VDOT projects. (Other types of pipe liners, Methods A, B, C, and E, are allowed also, such as corrugated metal, concrete,
or solid-walled metal pipe, but are approved by other means.) Products covered by the VDOT Road & Bridge
Specifications or the VDOT Special Provision for Pipe Rehabilitation are included on this Approved List, products not
so covered shall be placed on the Special Products Evaluation List (SPEL). Approved products by category are listed
below.
Product requirements for all Method D pipe rehabilitation systems are listed below:
Shall list host pipe diameter ranges for which the product is applicable.
Shall list any moisture limitations (e.g. installation in the dry, humidity restrictions, etc.).
Shall list environmental controls to prevent discharge/impact to soils and water.
Shall indicate corrosion potential/acid reaction potential.
Shall require manufacturer’s/supplier’s representative on-site during installation or use certified contractor if
certification exists.
Shall show VDOT interest, and at 5-year resubmittal periods, must show use by VDOT in last 5 years. Otherwise,
product will be removed from list. Product may also be removed from list for documented failure to perform
properly in the field; or as a result of changes in materials or manufacture or installation processes unless a
revised submittal to the VDOT Materials Division Soils Lab is made. (VDOT interest is typically indicated by
providing, on the product submittal, the name of the VDOT person or office or project who is expressing a desire
to try the product.)
Shall describe training/certification for installers.
Shall provide hydraulic data (initial surface roughness) of liners in place.
Further required evaluation criteria specific to each Category can be obtained from the VDOT Materials Division Soils
Lab.
All entries below are required to resubmit every five (5) years starting from January 2013.
Category A Cured in Place Pipe (CIPP)
Product
Vendor/Installer
Blue-Tek CIPP Liner
(6” – 48”)
Alphaliner
(6” – 54”)
Reline America, Inc.
Mike Hoffmaster, Sales and Marketing Manager
mhoffmaster@relineamerica.com
240.818.8639
24024 Frederick Road
Clarksburg, MD 20871
www.relineamerica.com
January 2018
II-A-116
Product
Vendor/Installer
InLiner
(6” – 90”)
Layne Inliner LLC
Greg Laszczynski, District Manager
Greg.laszczynski@layne.com
301.486.7570
6303 Macaw Court
Elkridge, MD 21075
www.layneinliner.com
New Life Liner System
(3” – 48”)
Stephen’s Technologies, Inc.
Ken Barton, President
stephenstechnologies@yahoo.com
888.783.7436
31004 Highway 27, PO Box 478
Lake Hamilton, FL 33851
www.stephenstech.com
Premier Pipe USA
(6” and greater)
AM-Liner East, Inc.
Mel Willett, Vice President
mwillett@amlinereast.com
540.955.9671
601 Jack Enders Blvd.
Berryville, VA 20117
www.amlinereast.com
RS MaxPatch
(3”-48”)
RS Technik
David Kozman, PE, Product Manager
dkozman@rstechnik.us
919.481.1977
P.O. Box 3745
Cary, NC 27519
www.rstechnik.us
RS MaxPatch
(3”-48”)
Capital City Services Company
Wayne Norman-President
capitalcityservices@yahoo.com
Office: 804-746-9665
5404 Sandy Valley Rd.
Mechanicsville, VA 23111
SAERTEX-LINER
(6” – 52”)
SAERTEX MultiCom LP
Mark Hallett, Vice President
m.hallett@saertex.com
704.584.4059
12200 Mt Holly-Huntersville Rd
Huntersville, NC 28078
www.saertex-multicom.com
Terra Verde
(Felt Liner, GRP-Felt Liner, CIPP Corp Felt Liner, CIPP
Corp GRP-Felt Liner)
(Felt Liners 3” – 100”)
(GRP-Felt Liners 8” 100”)
Tri-State Utilities
Andy McSweeney, President
andym@tristateutilities.com
757.366.9505
2111 Smith Avenue
Chesapeake, VA 23320
www.tristateutilities.com
January 2018
II-A-117
Product
Vendor/Installer
Trelleborg Pipe Seals
(1.5” – 47”)
Video Pipe Services
John Terpak, President
jterpak@videopipeservices.com
856.697.1900 / 301.931.0707
1566 Harding Highway
Newfield, NJ 08344
www.videopipeservices.com
Category B Fold and form flexible liner
Product
Vendor/Installer
None approved at this time.
Category C HDPE, PVC, Polypropylene (PP), or Fiberglass slip liners
Product
Vendor/Installer
Centrifugally Cast Fiberglass Reinforced Polymer
Mortar Pipe
(18” – 126”)
Hobas Pipe USA, Inc.
Bryant Welch, Area Manager Mid-Atlantic
bwelch@hobaspipe.com
832.622.8883
1413 Richey Road
Houston, TX 77073
www.hobaspipe.com
CONTECH A-2 PVC Corrugated Pipe
(12” – 36”)
Contech Engineered Solutions LLC
Greg Nester, Virginia Representative
gnester@conteches.com
540.797.6499
9025 Centre Pointe Drive, Suite 400
West Chester, OH 45069
www.conteches.com
HDPE Corrugated Pipe
(4” – 60”)
Advanced Drainage Systems, Inc.
Shawn Coombs, PE, National Railroads/Field R&D/MS
Zone Engineer
Shawn.coombs@ads-pipe.com
704.451.8844
510 Factory Street
Buena Vista, VA 24416
www.ads-pipe.com
InnerFlow HDPE Solid Wall pipe
(8” – 63”)
Contech Engineered Solutions LLC
Greg Nester, Virginia Representative
gnester@conteches.com
540.797.6499
9025 Centre Pointe Drive, Suite 400
West Chester, OH 45069
www.conteches.com
Link-Pipe SST-316 sleeves
(4” – 48”, joint and point repair)
Link-Pipe PVC Sleeves
(36” – 120”)
Capital City Services
Tom Arezzi, Director of Business Development
t.arezzi@capitalcityservices.com
804.746.9665
5404 Sandy Valley Road
Mechanicsville, VA 23111
www.capitalcityservices.com
January 2018
II-A-118
Product
Vendor/Installer
Polypropylene Corrugated Pipe
(12” – 60”)
Advanced Drainage Systems, Inc.
Shawn Coombs, PE, National Railroads/Field R&D/MS
Zone Engineer
Shawn.coombs@ads-pipe.com
704.451.8844510 Factory Street
Buena Vista, VA 24416
www.ads-pipe.com
List No. 38 (cont.)
Product
Vendor/Installer
Quick Lock
(6” – 32”, joint and point repair)
Uhrig-Rausch USA
Adam Baker, Vice President Sales
reusa@rauschusa.com
717.552.6460
4757 Innovation Way
Chambersburg, PA 17201
www.rauschusa.com
Capital City Services
Tom Arezzi, Director of Business Development
t.arezzi@capitalcityservices.com
804.746.9665
5404 Sandy Valley Road
Mechanicsville, VA 23111
www.capitalcityservices.com
Snap-Tite HDPE Solid Wall Pipe
(12” – 84”)
PE Sales, Inc.
Andy Cary, PE
amcary@pesales.com
410.733.0748
PO Box 461
Perry Hall, MD 21128
www.pesales.com
Spirally Wound PVC Pipe
(19” – 72” outside diameter for SL products)
(8” – 36” inside diameter for DF products)
(18” – 144”)
Midwest Mole, Inc.
David Howell, Project Manager
David@midwestmole.com
317.545.1355
6814 W 350 N
Greenfield, IN 46140
www.midwestmole.com
Sekisui SPR
Chris Lind, Regional Sales Manager
Chris.lind@sekisui-spr.com
301.752.3363
4125 Welcome All Rd., Suite 100, Atlanta, GA 30349
www.sekisui-spr.com
Weholite HDPE Profile Wall Pipe
(22” – 132”)
Uponor Infra, Ltd.
Tripp Waymack, Engineered Sales Consultant
tripp.waymack@uponor.com
540.682.9110
January 2018
II-A-119
Product
Vendor/Installer
6507 Mississauga Road
Mississauga, ON L5N 1A6
www.uponor.ca
Category D Spray-on liners
Product
Vendor/Installer
Centri-Cast Pipe Repair Mortar
(30” and greater)
Five Star Products, Inc.
Claudino Petrucelli, Eastern Regional Manager
petrucellic@fivestarproducts.com
203.336.7900
60 Parrott Drive
Shelton, CT 06484
www.fivestarproducts.com
CentriPipe
(30” and greater)
AP/M Permaform
Keith Walker, General Manager
keith@permaform.net
800.662.6465
PO Box 555
Johnston, IA 50131
www.permaform.net
Geospray
(30” and greater)
Milliken Infrastructure Solutions, LLC
Scott Naiva, PE, Northeast Region Manager
Scott.naiva@milliken.com
610.971.0362
707 Old Eagle School Road
Wayne, PA 19087
geopolymers.milliken.com
List No. 38 (cont.)
Product
Vendor/Installer
PolySpray FS-250
(36” and greater)
HydraTech Engineered Products LLC
Tim Meyer, Sales Manager
Tim.meyer@hydratechllc.com
513.827.9169
10448 Chester Road
Cincinnati, OH 45215
www.hydratechllc.com
Spraywall
(30” and greater)
SprayROQ
Jerry Gordon, President
jgordon@sprayroq.com
800.634.0504
248 Cahava Valley Parkway
Pelham, AL 35124
www.sprayroq.com
Mountain Grout MGP 25
Capital City Services
Tom Arezzi
t.arezzi@capitalcityservices.com
804.746.9665
5404 Sandy Valley Road
Mechanicsville, VA 23111
January 2018
II-A-120
Product
Vendor/Installer
www.capitalcityservices.com
CIPP Products
Effluent from the curing process (i.e. process water/condensate and rinse water) shall only be discharged directly
to a Publicly Owned Treatment Works (POTW) or pumped to above-ground containers for subsequent direct
discharge to a POTW ; no effluent shall be released exterior to the rehabilitated pipe or containers. For any
discharge to a POTW, the Contractor shall ensure the discharge conforms with the Industrial Pretreatment
Program requirements of that POTW. In the absence of an Industrial Pretreatment Program, the Contractor shall
notify, and obtain approval from, the POTW prior to any discharges and comply with all the requirements of the
POTW receiving the discharge. If the POTW does not allow the discharge or the Contractor cannot meet the
pre-treatment requirements, the Contractor shall collect the process water/condensate and rinse water at the
construction site and dispose of it at a private industrial wastewater treatment facility. Irrespective of disposal
method, the Contractor shall provide documentation of the POTW discharge approval or waste disposal
documentation to the VDOT Engineer.
The Contractor is responsible for reporting and taking the appropriate corrective actions for any accidental
releases of CIPP waste or CIPP effluent into the environment.
Refer to VDOT’s Special Provision for Pipe Rehabilitation for additional specifications for CIPP.
Spray-on Liner Products
Refer to VDOT’s Special Provision for Pipe Rehabilitation for specifications for spray-on liner products.
July 2016
II-A-121
List No. 39
(39) WICK DRAINS (Soils Lab)
As of July 1, 2016, this Approved List is now included in Approved List No. 63.
July 2010
II-A-122
List No. 40
(40) QUALIFIED SYSTEM W PAINTS (Chemistry Lab)
The following paint systems have been prequalified for use, but the manufacturer must provide certification
for each lot.
COAT
PAINT
COLOR
DRY FILM
THICKNESS (mils)
VOC
(lbs./Gal.)
#101 Primer
W-103 Water-Guard
#595-30045
2.0 4.0
1.46
#102 Intermediate
W-112 Water-Guard
White
2.0 4.0
1.29
#103 Finish
W-XXX Water-Guard
As specified
2.0 4.0
2.01
MANUFACTURER Elite Coatings, Gordon, GA (478) 628-2111
Approved 1/97
COAT
PAINT
COLOR
DRY FILM
THICKNESS (mils)
VOC
(lbs./Gal.)
#101 Primer
B66NW1 Acrylic
Brown
3.0 6.0
1.79
#102 Intermediate
B66WW8 Acrylic
White
3.0 6.0
1.46
#103 Finish
B66XXXXX Acrylic
As specified
3.0 5.0
1.87
MANUFACTURER Sherwin Williams, Richmond, VA (804) 387-4050
Approved 4/09
COAT
PAINT
COLOR
DRY FILM
THICKNESS (mils)
VOC
(lbs./Gal.)
#101 Primer
3356 - 2 Acrylic
Brown
2.0 3.0
1.17
#102 Intermediate
3356 - 1 Acrylic
White
2.0 3.0
1.02
#103 Finish
3356 - 3 Acrylic
As specified
2.0 3.0
1.17
MANUFACTURER Carboline Company, (Contact) Mechanicsville, VA (804) 304-3113
Approved 7/10
February 2018
II-A-123
List No. 41
(41) SUPERPAVE GYRATORY COMPACTORS FOR ASPHALT CONCRETE MIXTURES
(Asphalt Lab)
INTERLAKEN TECHNOLOGY CORPORATION Gyratory Compactor, Model GYR-001
PINE INSTRUMENT COMPANY Gyratory Compactor, Model AFGC125X
PINE INSTRUMENT COMPANY Gyratory Compactor, Model AFG1 SGC
TEST QUIP INC. (Gilson) Brovold Gyratory Compactor, No Model Number
TROXLER ELECTRONIC LABORATORIES, INC. Gyratory Compactor, Model 4140
TROXLER ELECTRONIC LABORATORIES, INC. Gyratory Compactor, Model 5850
December 2016
II-A-124
List No. 42
(42) HIGH DENSITY POLYETHYLENE (HDPE) PIPE PRODUCERS (Quality Assurance)
Advance Drainage Systems/Hancor
(ADS/Hancor)
Bessemer City, NC
Buena Vista, VA
Findlay, OH (TR 172)
Logan Township, NJ
Advance Drainage Systems/Hancor
(ADS/Hancor)
Ludlow, MA
Muncy, PA
Springfield, VT
Wooster, OH
Crumpler Plastic Pipe, Inc.
Roseboro, NC
Haviland Drainage Products
Haviland, OH
JM Eagle
Cochranton, Pennsylvania
Wharton, Texas
Lane Enterprises
Shippensburg, PA
Wytheville, VA
Soleno Inc.
Ibberville, QC
McAdam, NB
Haggersville, Ont
Southeast Culvert, Inc.
Winder, GA
QA List No. 42 is for HDPE Pipe approval only.
All HDPE end sections and elbows must be
Approved prior to installation by the
Location and Design Division
Standards / Special Design Section Manager
May 2017
II-A-125
List No. 43
(43) APPROVED WHITE AND YELLOW THERMOPLASTIC PRODUCTS - (Chemistry Lab)
MANUFACTUER / PRODUCT NO. NTPEP SUBMITTAL NO.
ENNIS TRAFFIC SOLUTIONS
White
884330 (VA-AK-SX-W-1) 2006 MS-027
885637 2008 PA-069
Yellow
884337 (counterpart to 884330)
884188 (formerly YID-5GX-VA-DCA)
884189 (formerly YID-5GX-VA-HRB)
884186 (Y1D-5GX-VA-DCC)
884187 (Y1D-5GX-VA-HRC)
VA-AK-SX-YNL-1
ENNIS - Alkyd Extrude Yellow:
32101462 (Formerly Cataphote)
32101464 (Formerly Cataphote)
32101466 (Formerly Cataphote)
32101468 (Formerly Cataphote)
32101463 (Formerly Cataphote)
ENNIS - Alkyd Spray Yellow:
32102462 (Formerly Cataphote)
32102464 (Formerly Cataphote)
32102466 (Formerly Cataphote)
32102468 (Formerly Cataphote)
E E VA AL F Y 99 1 (Formerly LaFarge and LDI)
P E VA AL F Y 99 1 (Formerly LaFarge and LDI)
E E VA AL F Y 99 2 (Formerly LaFarge and LDI)
P E VA AL F Y 99 2 (Formerly LaFarge and LDI)
E E VA AL F Y 99 3 (Formerly LaFarge and LDI)
P E VA AL F Y 99 3 (Formerly LaFarge and LDI)
EE VA AAL F Y998 (Formerly LaFarge and LDI)
EE VA AAL F Y04 (Formerly LaFarge and LDI)
EE VA AAL F Y06 (Formerly LaFarge and LDI)
List No. 43 (cont.)
May 2017
II-A-126
MANUFACTURER / PRODUCT NO. NTPEP SUBMITTAL NO.
SWARCO
White
Yellow
Swarolux 98 STR-115
Swarolux 98 STR-116
VYALF001
VYALF002
CROWN TECHNOLOGY
White
Crown-White (06-WAX-A1CF) 2000-PMM-049
Crown-White (06-WAS-A1CF) 2000-PMM-049
Yellow
Ecotherm 06-YAX-AACF
Ecotherm 06-YAX-01CF
Ecotherm 06-YAX-00CF
DOBCO
White
(W1X0645)
Yellow
Y1X0605
Y1S0605
Y1X0615
Y1X0625
OZARK
White
Ozark White Thermoplastic PMM-2014-01-047
Yellow
Ozark Yellow Thermoplastic PMM-2012-01-054
May 2017
II-A-127
List No. 43 (cont.)
MANUFACTURER / PRODUCT NO. NTPEP SUBMITTAL NO.
3M
White
3M All Weather White Thermoplastic PMM-2008-PA-100
Yellow
3M All Weather Yellow Thermoplastic PMM-2008-PA-101
NOTE:
Both White and Yellow 3M Thermoplastic must be installed using the following reflective glass beads and
3M Elements:
AASHTO, Type 3 glass Beads (0.11 lbs. /Ft2)
3M White or Yellow Elements (0.042 lbs. /Ft2)
November 2017
II-A-128
List No. 44
(44) APPROVED Q/A SUPPLIERS LIST (Quality Assurance)
Note: Approval does not include water and sewer line items.
Supplier
Location
Atlantic Construction Fabrics / ACF Environmental
Chantilly, VA
Atlantic Construction Fabrics / ACF Environmental
Chesapeake, VA
Atlantic Construction Fabrics / ACF Environmental (*p)
Harrisonburg, VA
Atlantic Construction Fabrics / ACF Environmental
Richmond, VA
Atlantic Construction Fabrics / ACF Environmental
Manassas, VA
Atlantic Construction Fabrics / ACF Environmental
Staunton
Advanced Drainage Systems, Inc.
Buena Vista, VA
A. H. Harris & Sons, Inc
Bristol, VA
A. H. Harris & Sons, Inc
Charlottesville, VA
A. H. Harris & Sons, Inc
Chesapeake, VA
A. H. Harris & Sons, Inc (Saunders Oil)
Richmond, VA
A. H. Harris & Sons, Inc (Virginia Construction Supply)
Roanoke, VA
Capitol Foundry of VA, Inc.
Virginia Beach, VA
Chesapeake Foundries, Inc.
Gaithersburg, MD
Chesterfield Trading Co. Inc.
Richmond, VA
Colonial Construction Materials, Inc
Oilville, VA
Colonial Construction Materials, Inc (*p)
Virginia Beach, VA
Country Boy Seed, Inc. (*p)
Bristol, VA
Curtis Contracting, Inc.
West Point, VA
Eastern Supply Inc
Winchester, VA
Ferguson Waterworks
Chantilly, VA
Ferguson Waterworks (*p)
Chesapeake, VA
Ferguson Waterworks
Danville, VA
Ferguson Waterworks (*p)
Farmville, VA
Ferguson Waterworks
Forest, VA
November 2017
II-A-129
List No. 44 (Cont.)
Supplier
Location
Ferguson Waterworks (*p)
Martinsville, VA
Ferguson Waterworks (*p)
Radford, VA
Ferguson Waterworks (*p)
Roanoke, VA
Ferguson Waterworks (*p)
Williamsburg, VA
Form Services, Inc.
Baltimore, MD
GeoProducts, LLC
Kilmarnock, VA
GETSCO (*p)
Elizabeth City, NC
GETSCO (*p)
Frederick, MD
Guaranteed Supply Company (*p)
Chesapeake, VA
Guaranteed Supply Company (*p)
Richmond, VA
Hanes Geo Components
Winston Salem, NC
Hanes Geo Components
Butner, NC
Hanes Geo Components (*p)
Eldersburg, MD
Hanes Geo Components (*p)
Manassas, VA
HD Supply Construction and Industrial White Cap
Capitol Heights, MD
HD Supply Construction and Industrial White Cap
Chesapeake, VA
HD Supply Construction and Industrial White Cap
Gainesville, VA
HD Supply Construction and Industrial White Cap
Richmond, VA
HD Supply Construction and Industrial White Cap
Springfield, VA
Interstate Construction Product, Inc.
Norton, VA
Jett & Company
Newport News, VA
Jett & Company
Norfolk, VA
Landscape Supply, Inc. (*p)
Chantilly, VA
Landscape Supply, Inc. (*p)
Charlottesville, VA
Landscape Supply, Inc.
Richmond, VA
(Southside)
Landscape Supply, Inc.
Richmond, VA (West
End)
November 2017
II-A-130
List No. 44 (Cont.)
(*p) = probationary
Supplier
Location
Landscape Supply, Inc.
Roanoke, VA
Landscape Supply, Inc.
Virginia Beach, VA
McPeak Supply, LLC
Roanoke, VA
Public Drainage Supply, Inc.
Blountville, TN
RAMTOOL and Supply Company (*p)
Chesapeake, VA
RAMTOOL and Supply Company
Herndon, VA
RAMTOOL and Supply Company
Richmond, VA
RAMTOOL and Supply Company (*p)
Roanoke, VA
TransCon Supply
Harrisonburg, VA
Whitlock Brothers, Inc.
Norfolk, VA
Whitlock Brothers, Inc.
Toano, VA
Whitlock Brothers, Inc.
Newport News, VA
Virginia Contractors Supply, Inc.
Manassas Park, VA
Virginia Road and Bridge Supply, Inc.
Salem, VA
October 2017
II-A-131
List No. 45
(45) QUALIFIED WOOD TREATMENT PLANTS (CHEMISTRY LAB)
The following wood treatment plants are approved to provide treated lumber to the Virginia
Department of Transportation. They are required to provide certification documentation with each order.
If a wood treatment plant is not on this list they must be approved by meeting the requirements
listed in the VDOT, Manual of Instructions, Section 204.29. They are required to provide
certification documentation with each order. (Allow a minimum of two weeks for sampling and
testing.)
Wood Treatment Plant Preservatives
Telephone #
Preservative
Date Approved
Acme Wood Preserving , Princeton, WV
(304) 425-0022
CCA, Creosote
Before 2006
Albemarle Wood Preserving, Albemarle, NC
(704) 982-2516
CCA
Before 2006
Amelia Lumber Co. Inc., Amelia, VA
(804) 561-2155
CCA
Before 2006
Cox Wood, Newsoms, VA - (formerly Atlantic Wood
Industries)
(757) 654-9462
CCA
Before 2006
B&M Wood Products, Inc., Manor, GA
(912) 283-0353
CCA, Creosote
Reinstated 2014
Bestway South Inc., Stony Point, NC
(704) 585-6373
CCA
Before 2006
Carolina Pole, Inc. of Cox Wood, Eutawville, SC
(803) 492-7728
CCA
2009
Carolina Pole, Inc. of Cox Wood, Leland, NC
(910) 371-3131
PENTA, CCA
2012
Tri-State Lumber, Fulton, MS
(662) 862-2125
CCA
2010
Fortress Wood Products, Henderson, NC
(252) 492-3046
or (336) 580-3095
CCA
Before 2006
Gladys Timber Products, Gladys, VA
(434) 283-4744
CCA
Before 2006
Long Life Treated Wood, Inc., Hebron, MD
(800) 451-3137
CCA, CA-C
Before 2006
Madison Wood Preservers Inc., Madison, VA
(800) 844-8383
CCA
Before 2006
American Timber and Steel Co. (formerly Midwest Wood
Treating)
Inc.), Norwalk, OH
(419) 668-1610
CCA, ACQ
Before 2006-name
change in 2014
North-South Wood Preserving, North, SC
(803) 682-4812
PENTA
2009
Reliance Treated Wood, Federalsburg, MD
(410) 754-5711
CCA
2009
Storey, S.I. Lumber Co., Inc., Armuchee, GA
(706) 234-1605
CCA, ACQ
2013
Wood Preservers Inc., Warsaw, VA
(804) 333-4022
CCA, CA-C
Before 2006
Notes:
PENTA treatment is pentachlorophenol and is, also, called PCP.
Dispersed or micronized Copper Azole (MCA) has not been standardized by the American Wood
Preservers
Association (AWPA) and is not acceptable for VDOT use.
Treatment plants that are approved for Copper Azole-B (CA-B) treatment and that have moved
to
Copper Azole-C (CA-C) treatment, have maintained their qualified status as CA-C.
Plants formerly approved to treat with ACQ or CA-B that are now using only MCA, are no
longer listed as qualified for the ACQ or CA-B treatments.
Durable Wood Preservers of Charlotte, NC requested removal from list 45.
April 2017
II-A-132
List No. 46
(46) SIGN SHEETING AND INK QUALIFIED PRODUCTS LIST (Chemistry Lab)
The following products have been prequalified, but the manufacturer must supply certification for
each lot.
Reflective sheeting used on permanent signs to include: Object markers, nose of
guardrails, permanent impact attenuators (except sand barrels), standard road edge
delineators, special road edge delineators, barrier delineators, guardrail delineators,
interstate road edge delineators, chevron panels, bridge end panel signs (VW-13), and
railroad advance warning signs (including any supplemental plaques) vertical panels
(Group 2 channelizing devices), traffic gates, Automatic Flagger Assistance Device
(AFAD) gate arms, and the "STOP" side of sign paddles (hand signalizing device).
Manufacturer
Product No.
Color
NTPEP Submittal No.
Sheeting:
Avery Dennison
T-9500
White
SSM-04-1073
Avery Dennison
T-9501
Yellow
SSM-04-1075
Avery Dennison
T-9505
Blue
SSM-04-1076
Avery Dennison
T-9507
Green
SSM-04-1074
Avery Dennison
T-9508
Red
SSM-04-1077
Avery Dennison
T-9511
Fluor. Yellow
SSM-05-1117
Avery Dennison
T-11500
White
SSM-08-1290
Avery Dennison
T-11501
Yellow
SSM-08-1291
Avery Dennison
T-11505
Blue
SSM-08-1292
Avery Dennison
T-11507
Green
SSM-08-1293
Avery Dennison
T-11508
Red
SSM-08-1294
Avery Dennison
T-11511
Fluor. Yellow
SSM-08-1295
Avery Dennison
T-11513
Fluor. Yellow Green
SSM-08-1296
Ink:
Avery Dennison
4930 series
Black, red, blue, green,
yellow
Avery Dennison
4930 Series
Clear coat
Inks and overlay films shall be specified by the sheeting manufacturer.
Manufacturer
Product No.
Color
NTPEP Submittal No.
Sheeting:
3M
3930
White
SSM-04-1061
3M
3931
Yellow
SSM-04-1062
3M
3932
Red
SSM-06-1148
3M
3935
Blue
SSM-05-1079
3M
3937
Green
SSM-04-1063
3M
3939
Brown
SSM-07-1247
April 2017
II-A-133
3M
3981
Fluorescent Yellow
SSM-99-6
3M
3990
White
SSM-04-1052
3M
3991
Yellow
SSM-94-5
3M
3992
Red
SSM-99-705
3M
3997
Green
SSM-04-1057
3M
3995
Blue
SSM-04-1056
3M
4081
Fluorescent Yellow
SSM-05-1107
3M
4090
White
SSM-05-1100
Permanent Signs Continued
Manufacturer
Product No.
Color
NTPEP Submittal No.
3M
4091
Yellow
SSM-05-1103
3M
4092
Red
SSM-05-1104
3M
4095
Blue
SSM-05-1105
3M
4097
Green
SSM-05-1106
3M
4099
Brown
SSM-07-1246
Ink:
3M
882
Traffic Sign Red
3M
883
Blue
3M
884
Yellow
3M
885
Black
3M
886
Orange
3M
887
Brown
3M
888
Green
3M
891
Thinner
3M
893
Violet
3M
894
Lemon Yellow
3M
895
Magenta
Inks and overlay films shall be specified by the sheeting manufacturer
April 2017
II-A-134
List No. 46 (Cont.)
Reflective sheeting used for: Bicycle and Pedestrian crossing, Playground, Deaf
Child Area, Watch for Children, School Crossing, School Bus Stop Ahead, School
plaque, School portion of the School Speed Limit, and supplemental plaques.
Manufacturer
Product No.
Color
NTPEP Submittal No.
Sheeting:
3M
3983
Fluor.Yellow-Green
SSM-95-4
3M
4083
Fluor. Yellow-Green
SSM-05-1108
Ink:
3M
885
Black
Sheeting:
Avery Dennison
T-11513
Fluor. Yellow-Green
SSM-08-1296
Avery Dennison
T-9513
Fluor. Yellow-Green
SSM-04-1079
Ink:
Avery Dennison
4930 Series
Black
Inks and overlay films shall be specified by the sheeting manufacturer
Reflective sheeting used on permanent recreational and cultural interest area
guidance signs, and for the hand symbol / DON’T WALK and numerals on
permanent educational pedestrian signal signs (R 10-3b thru R10-3e)
Manufacturer
Product No.
Color
NTPEP Submittal
No.
ORAFOL Americas,
Inc
5800
White
SSM-08-1265
ORAFOL Americas,
Inc
5800-030
Red
SSM-08-1268
ORAFOL Americas,
Inc
5800-080
Brown
SSM-08-1271
ORAFOL Americas,
Inc
5800-5061-030
White with Red Overlay Film
SSM-08-1285
ORAFOL Americas,
Inc
5800-5061-080
White with Brown Overlay Film
SSM-08-1289
ORAFOL Americas,
Inc
5800-5081-070
White with Black Overlay Film
SSM-08-1281
Inks and overlay films shall be specified by the sheeting manufacturer
Manufacturer
Product No.
Color
NTPEP Submittal
No.
Avery Dennison
T-6500
White
SSM-98-15
Avery Dennison
T-6501
Yellow
SSM-96-009
Avery Dennison
T-6507
Green
SSM-98-15
Avery Dennison
T-6508
Red
SSM-98-15
Avery Dennison
T-5509A
Brown
SSM-01-11
Avery Dennison
T-6505
Blue
SSM-96-009
April 2017
II-A-135
Avery Dennison
T-7500
White
SSM-00-766
Avery Dennison
T-7501
Yellow
SSM-01-869
INK:
Avery Dennison
4930 Series
Black, Red, Blue, Green, Yellow
Ink and overlay films shall be specified by sheeting manufacturer
Manufacturer
Product No.
Color
NTPEP Submittal
No.
3M
3930
White
SSM-04-1061
3M
3931
Yellow
SSM-04-1062
3M
3932
Red
SSM-06-1148
3M
3935
Blue
SSM-05-1079
3M
3937
Green
SSM-04-1063
3M
3939
Brown
SSM-07-1247
3M
3930
White
SSM-04-1061
Ink:
3M
882
Traffic Sign Red
3M
883
Blue
3M
884
Yellow
3M
885
Black
3M
886
Orange
3M
887
Brown
3M
888
Green
3M
891
Thinner
3M
893
Violet
3M
894
Lemon Yellow
3M
895
Magenta
Reflective sheeting used on permanent recreational and cultural interest area
guidance signs, and for the hand symbol / DON’T WALK and numerals on
permanent educational pedestrian signal signs
(R 10-3b thru R10-3e) (CONTINUED):
Manufacturer
Product No.
Color
NTPEP Submittal
No.
Nippon Carbide
N812
White
SSM-97-7
Nippon Carbide
N512
White
SSM-97-7
Nippon Carbide
N804
Yellow
SSM-97-7
Nippon Carbide
N808
Green
SSM-97-7
Nippon Carbide
N805
Red
SSM-97-7
Nippon Carbide
N806
Blue
SSM-97-7
Nippon Carbide
N809
Brown
SSM-97-7
Ink:
Nippon Carbide
3800N series
Inks and overlay films shall be specified by sheeting manufacturer
April 2017
II-A-136
List No. 46 (Cont.)
Reflective sheeting used to delineate the trailer’s back frame of Portable
Changeable Message Signs (PCMS), Automatic Flagger Assistance Device
(AFAD) gate arm, arrow boards and portable lights.
Manufacturer
Product No.
Color
NTPEP Submittal No.
Sheeting:
3M
981-32
White/red
Not Required
Avery Dennison
V-5720
White/Red
Not Required
ORAFOL Americas,
Inc
V82 Classic
White/Red
Not Required
ORAFOL Americas,
Inc
V99 Daytime White
White/Red
Not Required
ORAFOL Americas,
Inc
V92 Daybright
White/Red
Not Required
Reflective sheeting used on Type III Barricades
Manufacturer
Product No.
Color
NTPEP Submittal No.
Sheeting:
3M
3334/3336
White/Orange
SSM-09-1342
3M
446R
White/Orange
SSM-05-1110
3M
336
White/Orange
SSM-06-1152
Avery Dennison
W-7140
White/Orange
SSM-03-988
Avery Dennison
W-6000
White/Orange
SSM-07-1240
Orange construction and maintenance signs, barrier vertical panels installed on
concrete traffic barrier service, rear panel of truck mounted attenuators,
temporary impact attenuators (except sand barrels) and the “SLOW” side of sign
paddles.
Manufacturer
Product No.
Color
NTPEP Submittal No.
Sheeting:
3M
3924
Fluorescent Orange
SSM-03-1028
3M
3924 S
Fluorescent Orange
SSM-03-1038
3M
3954
Fluorescent Orange
SSM-02-26
3M
4084
Fluorescent Orange
SSM-05-1109
Ink:
3M
885
Black
April 2017
II-A-137
Sheeting:
Avery Dennison
W-7514
Fluorescent Orange
SSM-00-25
Ink:
Avery Dennison
4930 Series
Black
Sheeting:
Nippon Carbide
CRG 92847
Fluorescent Orange
SSM-02-909
Ink:
Nazdar
4930
Black
Nikkalite
N3603
Black
Inks and overlay films shall be specified by the sheeting manufacturer
List No. 46 (Cont.)
Reflective sheeting used on Tubular Delineators, Drums, and Temporary Sand
Barrels
Manufacturer
Product No.
Color
NTPEP Submittal No.
Sheeting:
3M
3810
White
SSM-01-03
3M
3814
Orange
SSM-01-03
3M
3914
Fluorescent Orange
SSM-98-13
Sheeting:
Avery Dennison
WR-6100 series
White
SSM-00-26
Avery Dennison
WR-6100 series
Orange
SSM-00-27
Reflective sheeting used on Permanent Sand Barrels and Cones
Manufacturer
Product No.
Color
NTPEP Submittal No.
Sheeting:
3M
3810
White
SSM-01-03
3M
3814
Orange
SSM-01-03
3M
3811
Yellow
SSM-96-7
Sheeting:
Avery Dennison
WR-6100 series
White
SSM-00-26
Avery Dennison
WR-6100 series
Orange
SSM-00-27
Reflective sheeting used on Reflective Roll-up signs
Manufacturer
Product No.
Color
NTPEP Submittal No.
Sheeting:
3M
RS-20-CW
White
MS 09195
3M
RS-24-CW
Fluorescent Orange
MS 09177
3M
RS-60
White
MS (26334)
3M
RS-64
Fluorescent Orange
MS (26335)
April 2017
II-A-138
Ink:
3M
1805
Black
Sheeting:
ORAFOL Americas,
Inc
Marathon
White
MS 19666
ORAFOL Americas,
Inc
Marathon
Fluorescent Orange
MS 19667
Ink:
Inks and overlay films shall be specified by the sheeting manufacturer
List No. 47
(47) ACRYLIC PAINT FOR ALUMINUM AND GALVANIZED SURFACES (Chemistry Lab)
Manufacturer
Paint
Dry Film
Thickness (DFT)
Color
Carboline Paint Co.
Primer:
Top Coat:
Carbocrylic 120
Carbocrylic 3350
1.0 2.0 mils
2.0 3.0 mils
White
As Specified
Elite Coatings
Primer:
Top Coat:
W 186 Metal Primer
Water Guard Series
3.0 mils
3.0 mils
Buff
As Specified
M.A.B. Paints
Primer:
Top Coat:
HydroPrime (073-189)
Seashore Enamel (024 Line)
1.5 2.0 mils
1.5 2.0 mils
White
As Specified
Porter Coatings
Primer:
Top Coat:
212 DTM Acrylic
2809 Series
2.0 mils
2.5 3.0 mils
Red
As Specified
Sherwin Williams
Primer:
Top Coat:
B71Y1 DTM Wash
B66-200 Series Finish
0.7 1.3 mils
2.5 4.0 mils
Yellow Green
As Specified
Surface Preparation
All aluminum and galvanized surfaces shall be cleaned in accordance with SSPC-SP1 to remove oil, dirt,
grease and any foreign matter that may be present. Secondly, the surface shall be cleaned using an acid
etching solution (agreed upon by the manufacturer of the paint) to remove any aluminum oxide or zinc oxide
present on the surface. Once etching is complete, the surface shall be washed with clean potable water to
neutralize the acid. All of the above procedures are critical to assure proper adhesion and durability of the
coating when painting either of these surfaces.
It may be necessary to sweep blast both aluminum and galvanized surfaces after cleaning the surface
according to SSPC SP-1. This may be used as an alternative to acid etching. This type of surface preparation
should be evaluated on a case-by-case basis and in conjunction with the manufacturer’s recommendations.
January 2012
II-A-139
List No. 48
(48) APPROVED TYPE F CONSTRUCTION MARKINGS (Chemistry Lab)
All waterborne paint markings shall be applied at a wet film thickness of 151 mil and a glass bead
application rate of 6 pounds per gallon.
WATERBORNE PAINT CLASS I
Manufacturer
Product No.
NTPEP Submittal No.
White
Sherwin Williams
BP-14016
STR-97-41-AL
BP-14019
STR-97-44-AL
BP15652
STR-98-PA-135
BP15622
STR-98-PA-150
BP17312
PMM(2000PA)-170
BP17313
PMM(2000PA)-171
BP17316
PMM(2000PA)-174
Ennis Paint (formerly LaFarge
Road Markings and Centerline)
CL-6000
STR-96-64-PA
CL-6004
STR-96-68-PA
CL-7018
STR-97-69-AL
CL-8210
STR-98-PA-96
CL-8214
STR-98-PA-100
CL-8216
STR-98-PA-102
CL-8218
STR-98-PA-104
CL-8220
STR-98-PA-106
CL-8222
STR-98-PA-108
Ennis Paint (formerly LaFarge
Road Markings and Linear
Dynamics)
LD96-1002
STR-96-85-PA
LD96-1008
STR-96-91-PA
LD971001C
STR-97-138-AL
LD981001
STR-98-PA-158
LD981002
STR-98-PA-159
LD981003
STR-98-PA-160
LD981004
STR-98-PA-161
LD981005
STR-98-PA-162
Ennis Paint
(formerly LaFarge Road
Markings)
LRMOOWB-19
PMM(2000PA)-110
LRMOOWB-20
PMM(2000PA)-111
Ennis Paint
Douglas 303-98
STR-98-PA-214
Ennis EP200W13
STR-98-PA-17
Ennis EP200W14
STR-98-PA-18
Ennis EP200W16
STR-98-PA-20
EP415W03
PMM(2000PA)-61
EP415W04
PMM(2000PA)-62
January 2012
II-A-140
WATERBORNE PAINT CLASS I
Manufacturer
Product No.
NTPEP Submittal No.
Yellow
Sherwin Williams
BP-14021
STR-97-46-AL
BP15611
STR-98-PA-139
BP15623
STR-98-PA-151
BP17314
PMM(2000PA)-172
Ennis Paint
(formerly Linear Dynamics) and
LaFarge Road Markings
LD96-1009
STR-96-92-PA
LD981009
STR-98-PA-165
LD981010
STR-98-PA-166
Ennis Paint
(formerly LaFarge Road
Markings )
LRMOOWB-31
PMM(2000PA)-122
Aexcel
72Y-AO65
STR-96-148-PA
Ennis Paint
Douglas 306-98
STR-98-PA-217
Douglas 307-98
STR-98-PA-218
Ennis EP200Y-15
STR-98-PA-26
Ennis EP200Y-18
STR-98-PA-29
EP415Y03
PMM(2000PA)-66
EP415Y04
PMM(2000PA)-67
EP415Y05
PMM(2000PA)-68
EP415Y06
PMM(2000PA)-69
January 2012
II-A-141
List No. 48 (Cont.)
WATERBORNE PAINT CLASS II
Manufacturer
Product No.
NTPEP Submittal No.
White
Sherwin Williams
BP-14016
STR-97-41-AL
BP15652
STR-98-PA-135
BP15622
STR-98-PA-150
BP17312
PMM(2000PA)-170
BP17313
PMM(2000PA)-171
Ennis Paint (formerly
Centerline
and LaFarge Road Markings)
CL-8214
STR-98-PA-100
CL-8216
STR-98-PA-102
CL-8218
STR-98-PA-104
CL-8220
STR-98-PA-106
CL-8222
STR-98-PA-108
Ennis Paint
(formerly Linear Dynamics)
and LaFarge Road Markings
LD981001
STR-98-PA-158
LD981004
STR-98-PA-161
LD981005
STR-98-PA-162
Ennis Paint
Douglas 303-98
STR-98-PA-214
Ennis EP200W13
STR-98-PA-17
Ennis EP200W14
STR-98-PA-18
Ennis EP200W16
STR-98-PA-20
EP415W03
PMM(2000PA)-61
EP415W04
PMM(2000PA)-62
Yellow
Sherwin Williams
BP-14021
STR-97-46-AL
BP15623
STR-98-PA-151
BP17314
PMM(2000PA)-172
Ennis Paint
LaFarge Road Markings
LRMOOWB-31
PMM(2000PA)-122
Ennis Paint
Douglas 306-98
STR-98-PA-217
Douglas 307-98
STR-98-PA-218
EP415Y03
PMM(2000PA)-66
EP415Y04
PMM(2000PA)-67
EP415Y05
PMM(2000PA)-68
EP415Y06
PMM(2000PA)-69
January 2005
II-A-142
January 2005
II-A-143
List No. 49
(49) QUALIFIED SEALERS AND TOPCOATS FOR METALLIZED SURFACES
(Chemistry Lab)
Note: Effective with the February 2005 advertisement, all approved paint systems must not exceed
the 2.8 lb/gal/ VOC requirement. Also paints manufactured after January 1, 2005 must meet these
requirements if supplied to or applied in the Northern Virginia VOC Emission Control Area. This
consists of the counties of Arlington, Fairfax, Loudoun, Prince William and Stafford, and the cities
Alexandria, Fairfax, Falls Church, Manassas, and Manassas Park City.
The following sealer/topcoat systems have been prequalified for use, but the manufacturer must provide
certification for each lot.
Manufacturer
DFT, mils
Carboline:
Rustbond FC
Carbothane 134 HG or
134 HS topcoat
1.0-2.0
2.0-3.0
ICI Devoe Coatings:
Pre-Prime 167
Devthane 378 topcoat
0.5-1.5
2.0-3.0
Xymax:
Monolock PP
Bridge Finish topcoat
1.5-2.5
1.0-2.0
January 2018
II-A-144
List No. 50
(50) PERFORMANCE GRADED (PG) BINDER SOURCES ON VA ASPHALT ACCEPTANCE PROGRAM -
(Asphalt Lab)
Code
Number
Certifying Supplier
Shipping Location
Materials
10
Associated Asphalt, Inc.
Bristol, VA
Associated Asphalt Bristol, LLC
10 Spurgeon Lane
Bristol, VA 24203
PG 64-22
PG 70-22
PG 76-22 PMA
PG 64S-22
PG 64H-22
PG 64E-22
11
Associated Asphalt, Inc.
Roanoke, VA
Associated Asphalt Roanoke, LLC
2677 Roanoke Ave., SW
Roanoke, VA 24015
PG 64-22
PG 70-22
PG 76-22 PMA
PG 64S-22
PG 64H-22
PG 64E-22
12
Associated Asphalt, Inc.
Martinsburg, WV
855 Corning Way
Martinsburg, WV 25401
PG 64-22
PG 70-22
PG 76-22 PMA
PG 64S-22
PG 64H-22
PG 64E-22
13
Associated Asphalt, Inc.
Greensboro, NC
100 S. Chimney Rock Road
Greensboro, NC 27409
PG 64-22
PG 70-22
PG 76-22 PMA
PG 64S-22
PG 64H-22
PG 64E-22
PG 64V-28
14
Associated Asphalt LLC
Associated Asphalt Hopewell LLC
410 Water Street
Hopewell, VA 23860
PG 64-22
PG 76-22
PG 64S-22
PG 64E-22
20
Bitumar USA
Baltimore, MD
Bitumar USA
6000 Pennington Ave
Baltimore, MD 21226
PG 64-22
PG 70-22
PG 70-28
PG 76-22 PMA
PG 64S-22
PG 64H-22
PG 64E-22
PG 64V-28
January 2018
II-A-145
Code
Number
Certifying Supplier
Shipping Location
Materials
21
Bitumar USA
Baltimore, MD
Westway Terminal Company, LLC
1055 Hull Street
Baltimore, MD 21230
PG 64-22
PG 64S-22
22
Bitumar USA
Baltimore, MD
Mid States Oil Terminal
5501 Pennington Ave
Baltimore, MD 21226
PG 64-22
PG 64S-22
23
Bitumar USA
Allmine Paving
200 Development Drive
Inwood, WV 25428
PG 64S-22
30
APEX Oil Company, Inc.
APEX Oil Company, Inc-Chesapeake
428 Barnes Road
Chesapeake, VA 23434
PG 64-22
PG 64S-22
31
APEX Oil Company, Inc.
APEX Oil Company, Inc- Baltimore
Petroleum Fuel & Terminal Co.-Apex
1622 S. Clinton Street
Baltimore, MD 21224
PG 64-22
PG 64S-22
PG 64E-22
40
Marathon Petroleum Company, LLC
Ashland (Catlettsburg), KY
Marathon Petroleum Company, LLC
11631 US Route 23
Catlettsburg, KY 41129
PG 64-22
PG 64S-22
41
Marathon Petroleum Company, LLC
Knoxville, TN
1808 Jones Street
Knoxville, TN 37920
PG 64-22
PG 76-22
PG 64S-22
PG 64E-22
January 2018
II-A-146
Code
Number
Certifying Supplier
Shipping Location
Materials
42
Marathon Petroleum Company, LLC
Big Sandy Terminal
15085 OLD US-23
Catlettsburg, KY 41129
PG 64E-22
50
Associated Asphalt, Inc.
Dumfries, VA
NuStar Energy
18000 Cockpit Point Rd
Dumfries, VA 22026
PG 64-22
PG 70-22
PG 76-22 PMA
PG 64S-22
PG 64H-22
PG 64E-22
51
Associated Asphalt, Inc.
Baltimore, MD
NuStar Energy
1800 Frankfurt Ave.
Baltimore, MD 21226
PG 64-22
PG 70-22
PG 58-28
PG 76-22 PMA
PG 64S-22
PG 64H-22
PG 58S-28
PG 64E-22
53
Associated Asphalt, Inc.
Newport News, VA
801 Terminal Avenue
Newport News, VA 23607
PG 64-22
PG 70-22
PG 76-22 PMA
PG 70-28 PMA
PG 58S-28
PG 64S-22
PG 64H-22
PG 64E-22
PG 64V-28
55
Associated Asphalt, Inc.
Gloucester (Terminal #B099)
King Street & Jersey Avenue
Gloucester City, NJ 08030-0031
Telephone: (856) 456-6673
Terminal Manager: Ted Davis
PG 70-28
PG 64V-28
56
Associated Asphalt, Inc.
Richmond, VA
Kinder Morgan
4110 Deepwater Terminal Rd
Richmond, VA 23234
PG 64-22
PG 64S-22
January 2018
II-A-147
Code
Number
Certifying Supplier
Shipping Location
Materials
80
Ergon Phillips 66
3111 McClure Lane
Knoxville, TN 37290
PG 64-22
PG 76-22
PG 64S-22
PG 64E-22
90
Blacklidge Emulsions, Inc
Greer, SC
539 East Poinsett Street
Greer, SC 29651
PG 64-22
PG 64S-22
100
J.T. Russell and Sons
Charlotte Terminal
601 North Hoskins Road
Charlotte, NC 28126
PG 64-22
PG 64S-22
101
J.T. Russell and Sons
Albemarle Terminal
221 Snuggs Road
Albemarle, NC 28001
PG 64-22
PG 64S-22
102
J.T. Russell and Sons
Healing Springs Terminal
18846 NC Hwy 8
Denton, NC 27239
PG 64-22
PG 64S-22
103
J.T. Russell and Sons
Branchville, VA
32420 Moore Lane
Branchville, VA 23828
PG 64-22
PG 64S-22
110
Gardner Asphalt Supply, LLC
Seaford, DE
25935 Nanticoke Street
Seaford, DE 19971
PG 64S-22
120
Asphalt Emulsions, Inc
Richmond, VA
1524 Valley Road.
Richmond, VA 23222
PG64H-22
121
Asphalt Emulsions, Inc
Manassas, VA
8730 Vulcan Lane
Manassas, VA 20109
PG64H-22
122
Asphalt Emulsions, Inc
Richmond, VA
7700 Fort Darling Road
Richmond, VA 23237
PG64S-22
130
Gunvor USA, LLC
Targa Terminal
1955 Chesapeake Ave
Baltimore, MD 21226
PG64S-22
July 2016
II-A-148
List No. 50.1
(50.1) EMULSIFIED ASPHALT SOURCES ON VA ASPHALT ACCEPTANCE PROGRAM
(Asphalt Lab)
Code Number
Certifying Supplier
Shipping Location
Materials
10
Asphalt Emulsion, Inc
Richmond, VA
1524 Valley Road.
Richmond, VA 23222
CRS-1, CRS-1h, CRS-2,
CRS-2L, CQS-1H,CQS-
1HLM, CSS-1H, RC-250
11
Asphalt Emulsion, Inc
Manassas, VA
8730 Vulcan Lane
Manassas, VA 20109
CRS-1, CRS-1h, CRS-2,
CRS-2L, CRS-2P, CQS-1H,
CQS-1HLM, CSS-1H
12
Asphalt Emulsion, Inc
Dumfries, VA
18000 Cockpit Point Rd
Dumfries, VA 22026
CRS-1,CRS-2, CRS-2L,
CSS-1H
13
Asphalt Emulsion, Inc
Newport News, VA
801 Terminal Ave
Newport News, VA 23607
CRS-1, CRS-1h, CRS-2,
CRS-2L, CQS-1H, CQS-
1HLM
14
Asphalt Emulsion, Inc
Dunn, NC
151 Emmett Rd
Dunn, NC 28334
CRS-1, CRS-2, CRS-2L,
CQS-1H, CQS-1HLM,
CSS-1H
20
Associated Asphalt Roanoke, LLC
Bristol, VA
10 Spurgeon Lane
Bristol, VA 24201
CRS-2, CRS-2L, CSS-1h
21
Associated Asphalt Roanoke, LLC
Roanoke, VA
2677 Roanoke Ave, SW
Roanoke, VA 24015
CRS-1h, CRS-2, CRS-2L
31
Asphalt Emulsions, Inc
Richmond, VA
7700 Fort Darling Road
Richmond, VA 23237
CRS-2, CRS-2L,
THMACOBond
32
Hammaker East, LLC
Baltimore, MD
3450 Asiatic Ave
Baltimore, MD 21226
CRS-1, CRS-2, CSS-1h,
CRS-2L, CQS-1hLM,
CQS-1h
July 2016
II-A-149
33
Hammaker East, LLC
Chambersburg, PA
118 Siloam Rd
Chambersburg, PA 17201
CRS-2, CSS-1h, CRS-2P
34
Hammaker East, LLC
Greensboro, NC
1124 S. Holden Rd
Greensboro, NC 27407
CRS-2, CRS-2L
40
Blacklidge Emulsions, Inc.
Greer, SC
539 East Poinsett Street
Greer, SC 29651
CRS-1, CRS-2
50
Seaboard
Baltimore, MD
3601 Fairfield Road
Baltimore, MD 21226
EM-50
60
Specialty Emulsions
York, PA
1194 Zinns Quarry Rd.
York, PA 17404
CRS-1, EM-50
80
Gardner Asphalt Supply, LLC
Seaford, DE
25935 Nanticoke Street
Seaford, DE 19971
CRS-1, CRS-2
September 2016
II-A-150
List 50.1A
(50.1A) APPROVED NONTRACK TACK COAT MATERIALS (Asphalt Lab)
The approved materials on List 50.1A must ship from an approved source and location on List 50.1.
Manufacturer
Product Name
Code
Blacklidge Emulsions
UltraTack
10
Blacklidge Emulsions
UltraFuse
11
Hammaker East
CNTTC
20
Asphalt Emulsions, Inc.
NTCQS-1HM
30
Seaboard Asphalt
EM-50TT
40
Associated Asphalt
NTCRS-1HSP
50
Specialty Emulsions
EM-50TT
60
Appalachian Materials Group
Drive on Tack Coat (DOT C-10)
70
May 2003
II-A-151
List No. 51
(51) APPROVED 2% COPPER NAPTHENATE (Chemistry Lab)
The following products have been approved for field use on saw cut CCA-treated wood posts.
Jasco Termin-8
Behr #90
W. M. Barr Coppo-W
Green’s Copper
November 2008
II-A-152
List No. 52
(52) ARTICULATED BLOCKS FOR SLOPE PROTECTION & DITCHLINING (Location & Design)
Armorflex
Armortec, Inc.
Suite 1990,
Peachtree Corners Plaza
Norcross, Georgia 30071
(800)241-6313
Note: Mats come in 320 sq. ft. sections. Requires a
crane to lift sections into place.
Hexagonal Interlocking Panels
Ecologigal Technology Company, Inc.
Thesauer Weg
D-04460 Kitzen
Germany
+4934296/779-20
+4934296/779-33 Fax
NOR-Bloc
Norwood, Inc.
222 George Street
Beckley, West Virginia 25801
(304)252-6517
Note: Individual interlocking blocks.
Cable Concrete
Permatile Concrete Products Co.
P. O. Box 2049
100 Beacon Road
Bristol, Virginia 24203-2049
(540)669-5332
Note: Mats come in 2 ft. x 4 ft. sections or 16 ft. x 4
ft. sections.
Shoreloc (formerly GeoLink)
ACF Environmental
2831 Cardwell Road
Richmond, VA 23234
(800) 223-9021
Note: Mats come in either 4” x 12” x 16” or 6” x
12” x 16” blocks.
Shoreblock SD
ACF Environmental
2831 Cardwell Road
Richmond, VA 23234
(800) 223-9021
January 2016
II-A-153
List No. 53
(53) EROSION CONTROL MULCHES (Maintenance Div.)
Straw of Hay Mulch applied at a rate of 3,000 lbs. per acre (3,600 kg/hectare) so as to provide a minimum 95% coverage to the soil.
Straw or hay shall be tacked with fiber mulch applied at a of 1,000 lbs. per acre, an approved mulch tackifier applied as recommended
by the manufacturer, punching, or disking into the soil, or other method approved by the Engineer.
Manufacturers of Mulch Products acceptable for use as Erosion Control Mulch:
Airtrol
United States Gypsum Co.
125 South Franklin Street
Chicago, IL 60606
(312)214-9192
Earth Guard Matrix
Terra Novo
2930 Patton Way
Bakersfield, CA 93308
Excel Fibermulch II
Bindex BFM
Bindex Blend
Bindex Blend WT
Bindex Wood
Bindex Wood WT
American Excelsior Company
831 Pioneer Ave
Rice Lake, WI 54868
Attn: Kurt Kelsey
(715) 236-5643
Flexterra Flexible Growth Medium (FGM)
ProMatrix-Engineered Fiber Matrix
Profile Products, LLC
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
(866) 325-6262
Hydra CX2
North American Green
14649 Highway North
Evansville, IN 47725
(800) 772-2040
HY-C4
East Coast Erosion Blankets, LLC
443 Bricker Road
Bernville, PA 19506
(610) 488-8496
HydroStraw Mulch
HydroStraw Guar Plus Formulation
HydroStraw Bonded Fiber Matrix
HydroStraw, LLC
3676 W 9000 N Road
Manento, IL 60950
1-800-545-1755
Mulch & Grow Bonded Fiber Matrix
Carolina Precision Fibers
P.O. Box 624
Elkin, NC 28621
PAM-12
ENCAP, LLC
3921 Algoma Rd.
Green Bay, WI 54311-9707
Posi-Cube Seed and Soil Guard
LSC Environmental Products, LLC
2183 Pennsylvania Ave
Apalachin, NY 13732
Spraymat
Profile Products LLC
Sandra House
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
800-508-8681
shouse@profileproducts.com
January 2016
II-A-154
List No. 53 (cont.)
Soil Guard
Mat, Inc.
12402 Highway 2
Floodwood, MN 55736
Soil Sement
Mid-West Industrial Supply Co., Inc.
14330 Heathland Terrace
Midlothian, Virginia 23113
(804)794-4403
Hal Martin, representative
USG Enviro-Shield Brand Bonded Fiber
United States Gypsum Co.
125 South Franklin Street
Chicago, IL 60606
(312)214-9192
October 2015
II-A-155
List No. 54
(54) FIBER MULCH SUPPLIERS (Please see list No. 11)
January 2016
II-A-156
List No. 55
(55) MULCH TACKIFIER SUPPLIERS (Maintenance Div.)
TacPac GT
Profile Products LLC
Sandra House
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
800-508-8681
shouse@profileproducts.com
Contack
Contack AT
Conwed Fibers
1850 Tate Blvd., S.E.
Suite 350
Hickory, NC 28601
(800)366-1180
EcoTak OP-5
EcoTak SAT-11
Eastern Products, Inc.
One Copperfield Way
Mahwah, New Jersey 07430-3200
(201)684-0463, (201)684-0464 FAX
EPINJ@aol.com
EC 1000
EC 3000
ECT 3000 (copolyacrylamide)
Erosion Control Technologies, Inc
3380 Route 22 West, Unit 3A
Branchburg, NJ 08876
P. O. Box 5383
North Branch, NJ 08876
(800)245-0551, (908)707-1445 FAX
A500 Hydro Stik
Finn Corp.
9281 LeSaint Drive
Fairfield, Ohio 45014
(800)543-7166
Jonathan Green Hydrogreen Tackifier
Joanthan Green Super Tackifier
Joanthan Green Turf Products
P. O. Box 326
Farmingdale, New Jersey 07727
(800)526-2303, (908)938-5788 FAX
Progacyl AG-50
Lyndal Chemical Co.
P.O.Box 1740
Coronet Dr.
Dalton, GA. 30720
(404)259-4831
Terra-Mulch Tacking Agent 3
Profile Products LLC
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
(800) 215-3427
Mulch Mate Supertac
StrawMate Tackifier
PRS Materials, Inc.
520 Pusey Avenue
Collingdale, PA 19023
prsm@juno.com
(610)532-3960, (610)534-1555 Fax
(800)432-3966
Dirt Glue
Unocal Corp.
Unocal Chemicals Division
1445 Alondra Blvd.
La Mirada, CA. 90638
(714)228-4749
January 2016
II-A-157
List No. 55 (cont.)
Tornado Tack ST-1000
Profile Products LLC
750 Lake Cook Road Suite 440
Buffalo Grove, IL 60069 (800)215-3427
Fiber Rx
HydroStraw, LLC
3676 W 9000 N Road
Manento, IL 60950
1-800-545-1755
April 2014
II-A-158
List No. 56
(56) STANDARD EC-2 EROSION CONTROL BLANKETS (Maintenance Div.)
NOTE: Products on this list may be selected for use only on VDOT projects still subject to the 2007 VDOT Road and Bridge
Specifications. EC-2 type products to be used on VDOT projects subject to the 2016 (or newer) VDOT Road and Bridge Specifications
must be selected from VDOT Approved Product List No. 80, Temporary Rolled Erosion Control Products (EC-2 Types 1 thru 4).
(VELOCITY 2.5 4.0 f.p.s.)
Curlex
Curlex I
Curlex I CL
Curlex II
Curlex II CL
Straw, Premier, Single, Green Net
Straw, Premier, Double, White Net
American Excelsior Company
831 Pioneer Ave.
Rice Lake, WI 54868
Attn: Kurt Kelsey
(715) 234-6861
Anti-Wash/Geojute
Belton Industries
8613 Roswell Road, Suite 200
Atlanta, Ga. 30350
(800) 225-4099, (770) 992-6361 Fax
Jute Mesh
Bemis Brothers Bag Company
St. Louis, Mo.
Jute Mesh
Belting Bagging Company
Belton, South Carolina
Dekowe 700
Dekowe 900
Belton Industries
Hambry Road
Belton, South Carolina 29627
East Coast ECC-2; ECC-2B
East Coast ECS-1; ECS-1B
East Coast ECS-2; ECS-2B
East Coast ECSC-2; ECSC-2B
ECX-1
ECX-2
East Coast Erosion Blankets, LLC
443 Bricker Road
Bernville, PA 19506
Diane M. Hitt
(610) 488-8496, Fax (610) 488-8494
S1000
Enviroscape ECM, Ltd.
22700 State Route 613
Oakwood, OH 45873
(888) 550-1999, Fax (419) 594-3213
S32 UVD, SC32, S32, S31 UVD, S31, C32
ErosionControlBlanket.com
Box 69
Riverton Manitoba, Canada R0C 2R0
Roy Nelsen
(970) 875-1158, Fax (970) 871-6779
Earthlock
St’d. Straw – Proguard SS
High Velocity Straw Proguard DS
St’d. Excelsior – Everhold XL1
High Velocity Excelsior Everhold XL2
Erosion Control Systems, Inc.
9015 Energy Lane
Northport, Alabama 35406
(205)333-3080, Fax (205) 333-3090
ETRS-1
ETRS-2
ETSC-70/30
ETC-100
Erosion Tech, LLC
105 Plant Camellia Road
Juliet, GA 31046
Josh Still
April 2014
II-A-159
List No. 56 (cont.)
(VELOCITY 2.5 - 4.0 f.p.s.)
Greenfix WS05 Straw Blanket
Greenfix WSO5B Straw Blanket
Greenfix WSO52 Straw Blanket
Greenfix WSO72 Straw Blanket
Greenfix WSO72B Straw Blanket
Greenfix CFS072B Straw -Coir Blanket
Greenfix CFSO72R Straw -Coir Blanket
Greenfix CFO72RR Coir Blanket
Greenfix CFO72B Coir Blanket
Greenfix America
P. O. Box 23310
Santa Barbara, California 93121
(800)929-2184 (888)GREENFX
Jute Erosion Control Matting
The Griffith Bag Company, Inc.
510 Waterman Drive
Harrisonburg, VA 22801
(800)433-2615, (540)433-2616
Soil Saver Heavy Jute Mesh
Jim Walls Company
Commerce Plaza, Suite 109
12820 Hillcrest Road
Dallas, Texas 75230
JMD Jute Mesh
JMD Manufacturing
5401 Progress Blvd.
Bethel Park, PA. 15102
Jute Mesh
L & M Bag and Supply Co., Inc.
541 Hazel Avenue
P.O. Box 865
Nashville, Georgia 31639
Jute Mesh
Ludlow Manufacturing & Sales Co.
Needham Heights 94, MA
MA-S1
Mid America Erosion Control Products, Inc.
P.O. Box 488, Charlestown, IN 47111
Kris Bernens (812) 289-1900 (812) 289-1599 Fax
Koir Mat 400
Nedia Enterprises, Inc.
22187 Vantage Pointe Place
Ashburn, VA 20148
(571) 223-0200 (571) 223-0202 Fax
S-75, SC-150,C-125, S150, S75BN, S150BN,
SC150BN, C125BN
North American Green
14649 Highway 41 North
Evansville, Indiana 47711
(812)867-6632
RS-1 Straw
RS-2 Straw
American Earth Solutions
5830 Highway 161
Springfield, Tennessee 37172
(615) 382-3300, (877) 56ROBEX
BioD Mat 70
BioD Mat 90
BioD-SiltCheck
RoLanka International, Inc.
155 Andrew Drive
Stockbridge, GA 30281
(770)506-8211
S-1
S-2
CS-2
C-2
SI Geosolutions
6025 Lee Highway, Suite 435
Chattanooga, TN 37421
(800)621-0444, (423)485-9068 Fax
SEC-S1, SEC-S2, SEC-XL1, SEC-XL2,
SEC-SC2, SEC-C2
Southern Environmental Conservation (SEC)
902 Main Avenue, Suite A
Northport, Alabama 35476
(866) 252-4486 (205) 752-1206 Fax
April 2014
II-A-160
List No. 56 (cont.)
(VELOCITY 2.5 - 4.0 f.p.s.)
US-1S, US-2S, US-2S/C, US-2C
US Erosion Control Products
1800 Springhead Church Rd.
Willacoochee, GA 31650
Verdyol Standard ERO-MAT
Verdyol High Vel. ERO-MAT
Verdyol Excelsior Standard
Verdyol Excelsior High Vel.
Verdyol Alabama, Inc.
P.O.Box 605
407 Miles Pkwy.
Pell City, AL. 35125-0605
(205) 338-4411, (205) 338-4595 Fax
Terraguard SS
Terraguard DS
WEBTEC, Inc.
P. O. Box 19729
Charlotte, NC 28219
Dave Snyder
(800)438-0027, (704)394-7946 Fax
X-Cel Permamat 100
Excel SS2
Excel SR-1
Excel R-1
Excel S-2
Excel CC-4
Western Excelsior
4609 E Boonville-New Harmony Rd
Evansville IN, 47725
Ph: 866-540-9810
FX: 812-867-8928
WintersFiber
WinterStraw SNG,
WinterStraw HVW
Winters Choice
Winters Coir
Winters Excelsior Company
77 Holly Road
P.O. Box 39
McWilliams, AL 36753
(800) 248-7237, (251) 746-2173,
(251) 746-2579 fax
§244.02 (k)(2). Soil retention mats shall consist of a machine-produced mat of wood fibers, wood excelsior, or
manmade fiber that shall intertwine or interlock. Matting shall be nontoxic to vegetation and germination of seed and
shall not be injurious to the unprotected skin of the human body.
Mats shall be of consistent thickness, with fiber evenly distributed over its entire area, and covered on the top and
bottom side with netting having a high web strength or covered on the top side with netting having a high web strength
and machine sown on maximum 2-inch centers along the longitudinal axis of the material. Netting shall be entwined
with the mat for maximum strength and ease of handling.
April 2017
II-A-161
List No. 57
(57) STANDARD EC-3 TYPE A, TYPE B, & TYPE C SOILS STABILIZATION MATS (Maintenance Div.)
NOTE: Products on this list may be selected for use only on VDOT projects still subject to the 2007 VDOT Road and Bridge
Specifications. EC-3 type products to be used on VDOT projects subject to the 2016 (or newer) VDOT Road and Bridge Specifications
must be selected from VDOT Approved Product List No. 81, Permanent Rolled Erosion Control Products (EC-3 Types 1 thru 3).
TYPE A MATS
(Velocity 4.0 - 7.0 f.p.s.)
AEC Premier Straw/Coconut
AEC Premier Coconut
Curlex I (.98)
American Excelsior Company
831 Pioneer Ave.
Rice Lake, WI 54868
Attn: Kurt Kelsey
(715) 234-6861
Earthlock
Enkamat 7003 (formerly 7005)
Enkamat 7010
Enkamat II
Colbond Inc.
1301 Sand Hill Road
P.O. Box 1057
Enka, NC
Attn: Jason Willis
(800) 365-7391, (828) 665-5009 fax
(Formerly Erosion Control Systems
Northport, Al. 35476 )
ECP-2; ECP-2 10 oz
ECX-2
ECC-2
ECC-3
ECP-3
ECSC-2
ECSC-3
T-RECS
East Coast Erosion Blankets, LLC
443 Bricker Road
Bernville, PA 19506
Diane M. Hitt
(610) 488-8496, Fax (610) 488-8494
C4000
S2000
SC3000
Enviroscape ECM, Ltd.
22700 State Route 613
Oakwood, OH 45873
(888) 550-1999, Fax (419) 594-3213
ETSC-70/30
ETC-100
ETPP-10
Erosion Tech, LLC
105 Plant Camellia Road
Juliette, GA 31046
Josh Still
Greenfix CF072RP
Greenfix America
P. O. Box 23310
Santa Barbara, California 93121
(800)929-2184 (888)GREENFX
MacMat N10
MacMat N20
MacMat N6P
MacMat N6G
MacMat N8P
MacMat N8G
Maccaferri Environmental Solutions
10303 Governor Lane Blvd
Williamsport, MD 21795-3116
(301) 223-6910 (301)223-6134 Fax
C350
SC250
P300
North American Green
14649 Highway 41 North
Evansville, Indiana 47711
(812)867-6632
April 2017
II-A-162
P42
ErosionControlBlanket.com
Box 69
Riverton Manitoba, Canada R0C 2R0
Roy Nelsen
(970) 875-1158, Fax (970) 871-6779
CS-3
Western Excelsior
4609 E. Boonville-New Harmony Rd.
Evansville IN, 47725
Ph: 866-540-9810
FX: 812-867-8928
Landlok 435
Propex Operating Company, LLC
428 Rollins Industrial Blvd.
Ringgold, GA 30736
(706) 965-6300, Fax (423) 553-3758
RSSC-3
RSC-4
American Earth Solutions
5830 Hwy 161
Springfield, TN 37172
(615)382-3300 Fax (615) 382-9051
S32, S32 UVD
ErosionControlBlanket.com
Box 69
Riverton Manitoba, Canada R0C 2R0
Roy Nelsen
(970) 875-1158, Fax (970) 871-6779
SEC-C2, SEC-P2
Southern Environmental Conservation (SEC)
902 Main Avenue, Suite A
Northport, Alabama 35476
(866) 252-4486 (205) 752-1206 Fax
US-2S/C, US-2C, US-2P10, US-2P12
US Erosion Control Products
1800 Springhead Church Rd.
Willacoochee, GA 31650
*Mats listed in the Type B category may be substituted for the Type A material at no additional cost to
VDOT.
April 2017
II-A-163
List No. 57 (cont.)
TYPE B MATS
(Velocity 7.0 - 10.0 f.p.s.)
AEC Curlex II (.98)
AEC Curlex III
AEC Curlex Enforcer
AEC Curlex High Velocity
Recyclex
Recyclex TRM V
AEC Premier Coconut
AEC Premier Straw/Coconut
American Excelsior Company
831 Pioneer Ave.
Rice Lake, WI 54868
Attn: Kurt Kelsey
(715) 234-6861
Enkamat 7012
Enkamat 7018
Enkamat 7020
Enkamat 7210
Enkamat 7220
Enkamat II
Colbond Inc.
1301 Sand Hill Road
P.O. Box 1057
Enka, NC
Attn: Jason Willis
(800) 365-7391, (828) 665-5009 fax
(Formerly Erosion Control Systems
Northport, Al. 35476 )
ECX-2
ECC-2; ECC-3
ECP-2
ECP-2 10 oz
ECP-3
ECSC-2
ECSC-3
T-RECS
East Coast Erosion Blankets, LLC
443 Bricker Road
Bernville, PA 19506
Diane M. Hitt
(610) 488-8496, Fax (610) 488-8494
C32, SC32
ErosionControlBlanket.com
Box 69
Riverton Manitoba, Canada R0C 2R0
Roy Nelsen
(970) 875-1158, Fax (970) 871-6779
ETPP-10
Erosion Tech, LLC
105 Plant Camellia Road
Juliette, GA 31046
Josh Still
PEC-MAT
Greenstreak, Inc.
3400 Tree Court Ind. Blvd.
St. Louis, Missouri 63122
(800)325-9504, (314)225-9854 Fax
MacMat N10
MacMat N20
MacMat N6P
MacMat N6G
MacMat N8P
MacMat N8G
Maccaferri Environmental Solutions
10303 Governor Lane Blvd
Williamsport, MD 21795-3116
(301) 223-6910 (301)223-6134 Fax
P-300
P300P
C350
SC250
North American Green
14649 Highway 41 North
Evansville, Indiana 47711
(812)867-6632, (812) 867-0247 Fax
April 2017
II-A-164
List No. 57 (cont.)
YPE B MATS (continued)
(Velocity 7.0 - 10.0 f.p.s.)
RSP-5
American Earth Solutions
5830 Hwy 161
Springfield, TN 37172
(615)382-3300 Fax (615) 382-9051
SEC-P2
Southern Environmental Conservation (SEC)
902 Main Avenue, Suite A
Northport, Alabama 35476
(866) 252-4486 (205) 752-1206 Fax
Bon Terra America SFB
Landlok 435
Landlok 450
Landlok 460
Landlok 1060
Propex Operating Company, LLC
428 Rollins Industrial Blvd.
Ringgold, GA 30736
(706) 965-6300, Fax (423) 553-3758
TB1000
TM3000
Tensar Earth Technologies
5775-B Glenridge Drive
Lakeside Center, Suite 450
Atlanta, Georgia 30328-5363
(800)292-4459, (404)705-9650 Fax
TerraGuard 44P
TerraGuard 45P
WEBTEC, Inc.
P. O. Box 240302
Charlotte, NC 28224-0302
(800)438-0027, (704)394-7946 Fax
Excel PP5-10
Excel PP5-8
Western Excelsior
4609 E Boonville-New Harmony Rd
Evansville IN, 47725
Ph: 866-540-9810
FX: 812-867-8928
US-2S/C, US-2C, US-2P10, US-2P12
US Erosion Control Products
1800 Springhead Church Rd.
Willacoochee, GA 31650
April 2017
II-A-165
List No. 57 (cont.)
TYPE C MATS
(Slopes 3:1 and flatter)
Curlex Enforcer
Recyclex TRM
Recyclex TRM-V
American Excelsior Company
831 Pioneer Ave.
Rice Lake, WI 54868
(715) 234-6861
Enkamat 7003 (formerly 7005)
Enkamat 7010
Enkamat II
Colbond Inc.
1301 Sand Hill Road
P.O. Box 1057
Enka, NC
Attn: Jason Willis
(800) 365-7391, (828) 665-5009 fax
(Formerly Erosion Control Systems
Northport, Al. 35476 )
ECC-3
ECP-2
ECP-2 10 oz
ECP-3
ECSC-3
T-RECS
East Coast Erosion Blankets, LLC
443 Bricker Road
Bernville, PA 19506
Diane M. Hitt
(610) 488-8496, Fax (610) 488-8494
ETPP-10
Erosion Tech, LLC
105 Plant Camellia Road
Juliette, GA 31046
Josh Still
Greenfix CF072RP
Greenfix America
P. O. Box 23310
Santa Barbara, California 93121
(800)929-2184 (888)GREENFX
PEC-MAT
Greenstreak
3400 Tree Court Industrial Blvd.
St. Louis, MO 63122-6614
(800) 325-9504
MacMat N6P
MacMat N6G
MacMat N8P
MacMat N8G
Maccaferri Environmental Solutions
10303 Governor Lane Blvd.
Williamsport, MD 21795-3116
(301)223-6910, (301) 223-6134 Fax
MA-S2
Mid America Erosion Control Products, Inc.
P.O. Box 488, Charlestown, IN 47111
Kris Bernens
(812) 289-1900 (812) 289-1599 Fax
C350
SC250
North American Green
14649 Highway 41 North
Evansville, Indiana 47711
(812)867-6632, (812) 867-0247 Fax
RSP-5
American Earth Solutions
5830 Hwy 161
Springfield, TN 37172
(615)382-3300 Fax (615) 382-9051
April 2017
II-A-166
List No. 57 (cont.)
TYPE C MATS (continued)
(Slopes 3:1 and flatter)
Landlok 435
Propex Operating Company, LLC
428 Rollins Industrial Blvd.
Ringgold, GA 30736
(706) 965-6300, Fax (423) 553-3758
Tenax Multimat
Tenax Corp.
4800 East monument Street
Baltimore, Maryland 21205
(410)522-7000, (410)522-7015 Fax
(800)356-8495
Excel PP5-10
Excel PP5-8
Western Excelsior
4609 E Boonville-New Harmony Rd
Evansville IN, 47725
Ph: 866-540-9810
FX: 812-867-8928
US-2P12
US Erosion Control Products
1800 Springhead Church Rd.
Willacoochee, GA 31650
April 2017
II-A-167
List No. 57 (cont.)
TYPE C MATS
(Slopes steeper than 3:1)
Enkamat S
Enkamat 7018
Enkamat II
Colbond Inc.
1301 Sand Hill Road
P.O. Box 1057
Enka, NC
Attn: Jason Willis
(800) 365-7391, (828) 665-5009 fax
(Formerly Erosion Control Systems
Northport, Al. 35476 )
ECP-2
East Coast Erosion Blankets, LLC
443 Bricker Road
Bernville, PA 19506
Diane M. Hitt
(610) 488-8496, Fax (610) 488-8494
MacMat N6P
MacMat N6G
MacMat N8P
MacMat N8G
Maccaferri Environmental Solutions
10303 Governor Lane Blvd.
Williamsport, MD 21795-3116
(301)223-6910, (301) 223-6134 Fax
P550
North American Green
14649 Highway 41 North
Evansville, Indiana 47711
(812)867-6632, (812) 867-0247 Fax
Pyramat 4700
Propex Operating Company, LLC
428 Rollins Industrial Blvd.
Ringgold, GA 30736
(706) 965-6300, Fax (423) 553-3758
P42
ErosionControlBlanket.com
Box 69
Riverton Manitoba, Canada R0C 2R0
Roy Nelsen
(970) 875-1158, Fax (970) 871-6779
May 2015
II-A-168
List No. 58
(58) STANDARD EC-4 TYPE 2, ROCK CHECK DAM (Location & Design)
for Synthetic Material Substitution
Substitutions may be made with the approval of the Engineer at no additional cost to VDOT.
Erosion Eel
Friendly Environment
100 Prince Street
Shelbyville, TN 37160
(615) 607-5953, (615) 333-7751 Fax
AEC Premier Straw Wattles 9”
AEC Premier Straw Wattles 12”
AEC Premier Straw Wattles 20”
Curlex Sediment Logs
American Excelsior Company
850 Avenue H East
Arlington, TX 76011
Phone: (817) 385-3500 Fax: (817) 649-7816
Toll Free: 800-777-7645
Triangular Silt Dike
Triangular Silt Dike Company, Inc.
608 Greenwood
Midwest City, OK 73110
Attn: Jason Roach
(405) 741-7406
Filtrexx DitchChexx
Filtrexx International
35841 Grafton Eastern Road
Grafton, OH 44044
(440) 926-2607
Terra-Tubes Filter Filtration Tubes (FFT)
Profile Products, LLC
750 Lake Cook Road
Suite 440
Buffalo Grove, IL 60089
(847) 215-1144, (866) 325-6262
GeoHay 9”
GeoHay 12”
GeoHay 15”
GeoHay 18”
GeoHay
P.O. Box 160040
Spartinburg, SC 29316
Diamond Sock 8”
Diamond Sock 12”
Diamond Sock 18”
Diamond Sock 24”
MKB Company
3450 East College Ave
State College, PA 16801
(888) 578-0777
October 2016
II-A-169
List No. 59
(59) ST'D. EC-6, INLET PROTECTION APPROVED LIST (Location & Design)
for Synthetic Materials Substitution
Substitutions may be made with the approval of the Engineer at no additional cost to VDOT.
Curb Drop Inlet
Curlex Sediment Logs
American Excelsior Company
850 Avenue H East
Arlington, TX 76011
(817) 385-3500, (817) 649-7816 Fax
Toll Free: 800-777-7645
Dandy Curb (formerly Beaver Dam True Dam)
Dandy Bag
Dandy Sack
Dandy Pop
Dandy Curb Bag
Dandy Curb Sack
Dandy Products
P.O. Box 1680
Powell, OH 43065
(800) 591-2284, (614) 875-6305 Fax
Diamond Sock 8”
Diamond Sock 12”
Diamond Sock 18”
Diamond Sock 24”
MKB Company
3450 East College Ave
State College, PA 16801
(888) 578-0777
EZ-Flo,
EZ-ClipGuard
Flo-Water, LLC
308 33rd St. West
DeMoines, IA 50265
(515)577-6763
Filtrexx InletSoxx
Filtrexx International
35481 Grafton Eastern Road
Grafton, OH 44044
(440) 926-2607
GeoHay 9”
GeoHay
P.O. Box 160040
Spartinburg, SC 29316
(864) 472-7000
Gutter Buddy
Gutter Eel
Gutter Gator
Grate Gator
Econocurb
RockInFilter
SiltSack
ACF Environmental
2831 Cardwell Road
Richmond, VA 23234
(800) 223-9021, (804) 743-7779 Fax
Rapid Flow Drain Filter
Erosion Control Products, Inc.
4001 Van Dyke Ct.
Monroe, NC 28110
(704) 821-3042, (704) 821-5239 Fax
July 2016
II-A-170
List No. 60
(60) ST'D. EC-8, DEWATERING BAG APPROVED LIST (Maintenance Div.)
As of July 1, 2016, this Approved List is now included in Approved List No. 63.
October 2016
II-A-171
List No. 61
(61) GRAY IRON CASTING MANUFACTURERS/DISTRIBUTORS ON QA/QC PROGRAM (Quality
Assurance)
Gray Iron Casting Domestic Manufacturers compliant with Buy America
Bingham & Taylor
601 Nalle Place
Culpeper, VA 22701
EJ
301 Spring Street
East Jordan, Michigan, USA 49727
EJ
270 Red Wing Road
Ardmore Industrial Park
Ardmore, Oklahoma 73401
Neenah Foundry Co.
2121 Brooks Avenue
Neenah, Wisconsin 54956
U.S. Foundry and Manufacturing Corporation
8351 N.W. 93 Street
Medley (Miami), Florida, USA 33166-2096
February 2013
II-A-172
List No. 62
(62) CABLE GROUTS (Physical Lab)
Masterflow 1205
BASF Construction Chemicals, LLC
Euco Cable Grout PTX
Euclid Chemical Company
January 2018
II-A-173
List No. 63
(63) GEOSYNTHETICS (Soils Lab)
(63) Geosynthetics (Soils Lab)
January 1, 2018
This list covers the geotextile products in VDOT Road & Bridge Specifications Section 245 Geosynthetics and Low Permeability Liners,
and also of specialty high-strength geotextiles and geogrids.
Products on this list meet VDOT Road and Bridge Specification 245 or Special Provisions as noted and are evaluated through
AASHTO’s National Transportation Product Evaluation Program (NTPEP) where applicable.
For products for which evaluation is available through NTPEP, to be on this list the product must have current cycle test results listed
in NTPEP’s DataMine that meet the VDOT Specification or Special Provision requirements, and the source manufacturer and any
downstream facility taking responsibility for the quality of the product must be listed as compliant in the NTPEP Geosynthetics or
REGEO audit program, and the local supplier must be listed on VDOT Approved List No. 44 of Approved Suppliers. For products
for which VDOT requires additional tests over those included in the NTPEP evaluation, or which are not included in the NTPEP
evaluation program, the additional required tests are listed in each category and must be done by a 3rd party laboratory that is accredited
by The Geosynthetics Research Institute (GRI-LAP) in the specific test and also accredited by an acceptable body for quality processes.
Such additional test information shall be submitted to the VDOT Materials Division directly.
Temporary Silt Fence Fabric - 245.03(a)*
Fabric for Type A and Type B Silt Fence
Product
Expiration Date
ACF VSF
Jun 1, 2018
Beltech 806
Jun 1, 2018
TerraTex SF-D
Jan 1, 2021
W100
Jan 1, 2020
Winfab V10
Jan 1, 2019
Suppliers must be on VDOT Approved List No. 44.
*Additional test results for silt fence fabric per ASTM D5141-11 required every 3 years along with NTPEP product evaluation, run in
triplicate as per NTPEP Erosion Control Products Committee Work Plan, to obtain flow rate and filtering efficiency.
January 2018
II-A-174
Riprap Bedding Geotextile (Separation Fabric) - 245.03(b)
Product
Expiration Date
GT170
Jan 1, 2019
GT180
Jan 1, 2019
GEOTEX 250ST
Jan 1, 2019
GEOTEX 315ST
Jan 1, 2020
GEOTEX 601
Jan 1, 2019
GEOTEX 701
Jan 1, 2019
GEOTEX 801
Jan 1, 2019
LM 600NT
Jan 1, 2019
LM 2199FW
Jan 1, 2019
MACTEX N35.1
Jan 1, 2019
MACTEX N44.1
Jan 1, 2019
MACTEX N47.1
Jan 1, 2019
S250N
Jan 1, 2019
SW315
Jan 1, 2019
Skaps GT160
Jan 1, 2019
Tencate Mirafi 160N
Jan 1, 2021
Tencate Mirafi 170N
Jan 1, 2021
Tencate Mirafi 180N
Jan 1, 2021
Tencate Mirafi 600X
Jun 1, 2021
Tencate Mirafi FW403
Jan 1, 2021
Tencate Mirafi FW404
Jan 1, 2019
Tencate Mirafi FW500
Jan 1, 2020
Tencate Mirafi FW700
Jan 1, 2019
TerraTex HD
Jan 1, 2020
TerraTex N06
Jan 1, 2020
TerraTex N07
Jan 1, 2020
TerraTex N08
Jan 1, 2020
W250
Jan 1, 2019
Winfab 700N
Jan 1, 2020
Winfab 2404
Jan 1, 2019
Suppliers must be on VDOT Approved List No. 44.
January 2018
II-A-175
Drainage Fabric - 245.03(c)
Product
Expiration Date
ADS 0451T
Jan 1, 2019
ADS 0601T
Jan 1, 2019
ADS 0701T
Jan 1, 2019
ADS 0801T
Jan 1, 2019
ADS 1071T
Jan 1, 2019
Dalco 1045
Jan 1, 2020
GEOTEX 401
Jan 1, 2019
GEOTEX 501
Jan 1, 2019
GEOTEX 601
Jan 1, 2019
GEOTEX 701
Jan 1, 2019
GEOTEX 801
Jan 1, 2019
GEOTEX 1101
Jan 1, 2019
GT110
Jan 1, 2019
GT160
Jan 1, 2019
GT170
Jan 1, 2019
GT180
Jan 1, 2019
LM 450NT
Jan 1, 2019
LM 600NT
Jan 1, 2019
MACTEX N21.1
Jan 1, 2019
MACTEX N35.1
Jan 1, 2019
MACTEX N44.1
Jan 1, 2019
MACTEX N47.1
Jan 1, 2019
N045N
Jan 1, 2019
Skaps GT142
Jan 1, 2019
Tencate 140N
Jan 1, 2021
Tencate Mirafi 160N
Jan 1, 2021
Tencate Mirafi 170N
Jan 1, 2021
Tencate Mirafi 180N
Jan 1, 2021
Tencate Mirafi 1100NPA
Jan 1, 2019
TerraTex N04.5
Jan 1, 2020
TerraTex N05
Jan 1, 2021
TerraTex N06
Jan 1, 2020
TerraTex N07
Jan 1, 2020
TerraTex N08
Jan 1, 2020
Thrace-LINQ 140EX
Jan 1, 2019
Winfab 450N
Jan 1, 2020
Winfab 700N
Jan 1, 2020
Winfab 800N
Jan 1, 2020
Suppliers must be on VDOT Approved List No. 44.
January 2018
II-A-176
Subgrade Stabilization Fabric 245.03(d)1
Product
Expiration Date
ADS 0451T
Jan 1, 2019
ADS 0601T
Jan 1, 2019
ADS 200W
Jan 1, 2019
ADS 250W
Jan 1, 2019
ADS 270HP
Jan 1, 2019
ADS 315W
Jan 1, 2019
ADS 370HP
Jan 1, 2019
GEOTEX 2x2 HF
Jan 1, 2020
GEOTEX 200ST
Jan 1, 2020
GEOTEX 250ST
Jan 1, 2019
GEOTEX 315ST
Jan 1, 2020
GEOTEX 401
Jan 1, 2019
LM 315NT
Jan 1, 2019
MACTEX N21.1
Jan 1, 2019
MACTEX N35.1
Jan 1, 2019
MACTEX N44.1
Jan 1, 2019
MACTEX N47.1
Jan 1, 2019
MACTEX W1 200
Jan 1, 2019
MACTEX W1 250
Jan 1, 2019
MACTEX W1 315
Jan 1, 2019
S200N
Jan 1, 2019
SW200
Jan 1, 2020
SW315
Jan 1, 2020
Tencate Mirafi 140N
Jan 1, 2021
Tencate Mirafi 160N
Jan 1, 2021
Tencate Mirafi 170N
Jan 1, 2021
Tencate Mirafi 180N
Jan 1, 2021
Tencate 500XTencate Mirafi 500X
Jan 1, 2020Jan 1, 2020
Tencate Mirafi 600X
Jan 1, 2021
Tencate Mirafi HP270
Jan 1, 2019
Tencate Mirafi HP370
Jan 1, 2019
Tencate Mirafi 1100NPA
Jan 1, 2019
TerraTex EP-12
Jan 1, 2021
TerraTex GS
Jan 1, 2020
TerraTex GS-180
Jan 1, 2021
TerraTex GS-270
Jan 1, 2021
TerraTex HD
Jan 1, 2020
TerraTex HPG-16
Jan 1, 2020
TerraTex HPG-27
Jan 1, 2021
TerraTex HPG-37
Jan 1, 2021
TerraTex HPG-500
Jan 1, 2020
TerraTex N04.5
Jan 1, 2020
TerraTex N05
Jan 1, 2021
TerraTex N06
Jan 1, 2020
TerraTex N07
Jan 1, 2020
TerraTex N07.5
Jan 1, 2021
TerraTex N08
Jan 1, 2020
Thrace-LINQ GTF200S
Jan 1, 2019
W180
Jan 1, 2020
W250
Jan 1, 2020
January 2018
II-A-177
Product
Expiration Date
W270
Jan 1, 2020
Suppliers must be on VDOT Approved List No. 44.
January 2018
II-A-178
Embankment Stabilization Fabric (for embankments up to 6 feet high) 245.03(d)2*
Product
Expiration Date
ADS 0801T
Jan 1, 2019
ADS 2x2
Jan 1, 2019
ADS 370HP
Jan 1, 2019
GEOTEX 2x2 HF
Jan 1, 2020
GEOTEX 315ST
Jan 1, 2020
LM 315NT
Jan 1, 2019
LM 370HP
Jan 1, 2019
LM 800NT
Jan 1, 2019
MACTEX N47.1
Jan 1, 2019
MACTEX W1 315
Jan 1, 2019
S300N
Jan 1, 2019
Skaps GT180
Jan 1, 2019
SW315
Jan 1, 2020
Tencate Mirafi 180N
Jan 1, 2021
Tencate Mirafi 600X
Jan 1, 2021
Tencate Mirafi 1100NPA
Jan 1, 2019
Tencate Mirafi HP370
Jan 1, 2019
TerraTex 4x4HF
Jan 1, 2021
TerraTex HD
Jan 1, 2020
TerraTex HPG-16
Jan 1, 2020
TerraTex HPG-37
Jan 1, 2021
TerraTex HPG-57
Jan 1, 2021
TerraTex HPG-500
Jan 1, 2020
TerraTex N08
Jan 1, 2020
Suppliers must be on VDOT Approved List No. 44.
*Seam strength tests using ASTM D4632 also required per VDOT Road and Bridge Specification 245, to be provided by
manufacturer or supplier or Contractor as required for project.
January 2018
II-A-179
Prefabricated Geocomposite Pavement Underdrain (Edgedrain) 245.03(e)*
Product
Expiration Date
AWD SITEDRAIN Strip 9400 with
GEOTEX 401, with AWD fittings
Jan 1, 2019
J-Drain ESD III with Tencate Mirafi
140N, with J-Drain ESD fittings,
connectors, end caps, and tape
Jan 1, 2021
TerraDrain Strip 640 with TerraTex
N04.5with J-Drain ESD fittings,
connectors, end caps, and tape
Jun 1, 2020
Suppliers must be on VDOT Approved List No. 44.
*The NTPEP program does not include edgedrains, except the fabric which must be evaluated by NTPEP and from a NTPEP-compliant
manufacturer. These products must meet the material requirements of the VDOT Specification. Test results are required every 3 years,
to be submitted to VDOT Materials Division. When submitting product request to VDOT for listing here, the manufacture must also
submit connections for underdrain-to-outlet pipe.
Geocomposite Wall Drains 245.03(f)*
Product
Expiration Date
American Wick Drain DS116,
DS186, with Propex Geotex 601
Jan 1, 2019
J-Drain ES1162P with Tencate
Mirafi 160N
Jan 1, 2019
TerraDrain 106/2-VDOT with
Tencate Mirafi 160N
Jan 1, 2019
Suppliers must be on VDOT Approved List No. 44.
*The NTPEP program does not include wall drains, except the fabric which must be evaluated by NTPEP and from a NTPEP-compliant
manufacturer. These products must meet the material requirements of the VDOT Specification. Test results are required every 3 years,
to be submitted to VDOT Materials Division.
Geomembrane Moisture Barrier 245.03(g)*
Product
Expiration Date
EPT XTRM PLY PVC HP 7100
Series 30 mil single ply ASTM
7176/FGI 1115
Jan 1, 2021
Suppliers must be on VDOT Approved List No. 44.
*The NTPEP program does not include geomembrane moisture barriers. These products must meet the material requirements of the
VDOT Specification. Test results are required every 3 years, to be submitted to VDOT Materials Division.
January 2018
II-A-180
Dewatering Bag 245.03(h)
Product
Expiration Date
CSB-series (Thrace-LINQ 245EX)
Jun 1, 2018
DIRTBAG 55 (R100)
DIRTBAG 55 (Propex 1001)
DIRTBAG 55 (SKAPS GT110)
Jan 1, 2020
Jan 1, 2019
Jan 1, 2019
Frank Roberts & Sons GTF-FB
series (Thrace-LINQ 250EX)
Jan 1, 2019
Geo Products Filter Bags (Thrace
LINQ 250EX)
Jan 1, 2019
TerraTex Filter Bags N10 series
(N10)
Jan 1, 2020
Suppliers must be on VDOT Approved List No. 44.
Pavement Interlayer (to inhibit reflective cracking) 245.03(i) or VDOT Special Provision*
Product
Expiration Date
C040 (Type II Fabric)
Jan 1, 2020
TerraTex OLI (Type II Fabric)
Jan 1, 2020
Suppliers must be on VDOT Approved List No. 44.
* To make this list, the material must meet the requirements of the VDOT Special Provision for Pavement Interlayer.
Low Permeability Liners for Stormwater Management Facilities 245.03(j)*
Product
Expiration Date
Bentomat 200R
Jan 1, 2020
Bentomat ST
Jan 1, 2020
GSE Bentoliner CNSL
Jan 1, 2020
GSE Bentoliner NSL
Jan 1, 2020
Suppliers must be on VDOT Approved List No. 44.
*The NTPEP program does not include low permeability liners. These products must meet the material requirements of the VDOT
Specification. Test results are required every 3 years, to be submitted to VDOT Materials Division.
Prefabricated Vertical Drains VDOT Special Provision*
Product
Expiration Date
Suppliers must be on VDOT Approved List No. 44.
*The NTPEP program does not include prefabricated vertical drains. These products must meet the material requirements of the VDOT
Special Provision for Prefabricated Vertical Drains dated April 4, 2016. Test results are required every 3 years, to be submitted to
VDOT Materials Division.
January 2018
II-A-181
High Strength Geotextiles and Geogrids
At this time, these products must be designed, specified, and approved on a project basis.
Product
Expiration Date
TerraTex N12
Jan 1, 2020
Suppliers must be on VDOT Approved List No. 44.
July 2016
II-A-182
List No. 64
(64) HYDRAULIC BARRIERS FOR USE IN STORM WATER RETENTION (Soils Lab)
As of July 1, 2016, this Approved List is now included in Approved List No. 63.
February 2018
II-A-183
List No. 65
(65) APPROVED SOUND BARRIER PANELS (James Ponticello)
Precast Concrete
(Companies provide both absorptive
and/or reflective)
Product Name
Contacts Name
Armtec
505 York Blvd., Suite 2
Hamilton, ON Canada L8R 3K4
Durisol ®
Mr. Brian Clarke
Concrete Innovations /Coastal Precast
System
5125 Highway 421 North
Wilmington, NC 28401
Whisper-Wall ®
Mr. Stephen McCowin
Faddis Concrete Products
2206 Horseshoe Pike
Honey Brook, PA 19344
AcoustaCrete ®
AngleWall ®
Mr. Gary Figallo
The Reinforced Earth Company
12001 Sunrise Valley Drive
Suite 400
Reston, VA 20191
Fanwall
Mr. Keith Braybant
Smith-Midland Corporation
P.O. Box 300
Midland, VA 22728
Softsound ®
Mr. Guy Schuch
Other
Product Name
Contacts Name
Atlantic Industries Limited
640 Waydom Drive
Ayr, ON
N0B 1E0
TUF-Barrier ®
Silent Protector ®
Mr. Paul Sunseth
Carsonite Composites
19845 US Highway 76
Newbery, South Carolina 29108
AcoustaShield ®
Mr. Heath McCutcheon
Centria
1005 Beaver Grade Road
Moon Township, PA 15108
Eco Sound Barrier
Mr. Cory Matchett
CYRO Industries
1796 Main Street
Sanford, ME 04073
ACRYLITE ® Soundstop
Mr. Nathan Binette
Faddis Concrete Products
2206 Horseshoe Pike
Honey Brook, PA 19344
AcoustAL™
Mr. Gary Figallo
HOOVER Treated Wood Products, Inc.
154 Wire Road
Thomson, Georgia 30824
Plywall ®
Ms. Pam Floyd
Sound Fighter Systems
P.O. Box 7216
Shreveport, LA 71137-7216
Sound Fighter Systems
SonaGuard ®
Mr. Murray Stacy
Date: February 22, 2018
January 2018
II-A-184
List No. 66
(66) APPROVED WARM-MIX ASPHALT PRODUCTS AND PROCESSES -- (Asphalt Lab)
Manufacturer
Product/Process
Code
Sasol International
Sasobit
1
Ingevity
Evotherm ET
2
Astec, Inc.
Double Barrel Green System
3
Maxam
AQUABlack
4
Gencor
Ultrafoam Gx
5
Ingevity
Evotherm M-1
6
StanSteel
Accu-Shear
7
ArrMaz
AD-here ULTRA 1
8
Arkema Inc.
Cecabase RT 945
9
Sonneborn
SonneWarmix
10
Zydex Inc.
ZycoTherm
11
New products/processes will be evaluated by the District Materials Engineer and a central committee. Once approved,
the product/process will be added to this approved list. The evaluation procedure involves documentation and
independent test data to support the new WMA product or process, mix design submittals and a trial section.
February 2009
II-A-185
List No. 67
(67) APPROVED PRECAST PAVEMENT SYSTEMS - (Affan Habib)
Manufacturer
Product/Process
The Fort Miller Co.
P.O. Box 98
Schuylerville, NY 12871-0098
(518) 695-4970
Super Slab
The approval is subject to further clarification of the submitted specification/details and a successful trial installation.
April 2016
II-A-186
List No. 68
(68) STORM WATER MANAGEMENT TRASH RACKS (SWM-DR) - (Location & Design)
Substitutions may be made with the approval of the Engineer at no additional cost to VDOT.
Manufacturer Name
Product(s)
Plastic Solutions, Inc.
240 McGhee Road
Winchester, VA 22603
PH: 540-722-4694
StormRax Round Series 24”, 36”, 48”, 60”
StormRax -- Pyramid Series 72”, 84”, 96”
StormRax Peak Roof Series Square/Rectangular
August 2012
II-A-187
List No. 69
(69) APPROVED FENCE MANUFACTURERS - (Chemistry Lab)
Approved fence material shall be used in accordance with the R&B specifications, R&B Standards, Plans, or as
directed by the Engineer.
Allied Tube and Conduit
Merchants Metals
Pipe, SS-40
Pipe, Vinyl Coated
Pipe, SCH-40
Chain-Link Fence, Galvanized
Chain-Link Fence, Aluminized
Bekaert Corporation
Chain-Link Fence, Vinyl Coated
Barbed Wire, Galvanized
Barbed Wire, Galvanzied
Woven Wire, Galvanized
Barbed Wire, Aluminized
Brace/Line Wire, Galvanized
Tension Wire, Galvanized
Tension Wire, Aluminized
Chicago Heights Steel
Post - "T"
Franklin
Industries
CMC
Post - "T"
Post “T”
Guardian Fence Suppliers
Stateside Steel & Wire, LLC
Chain-Link Fence, Galvanized
Stephens Pipe & Steel,LLC
Chain-Length Fence,
Galvanized
Pipe, Galvanized
Chain-Link Fence, Aluminized
Pipe, Vinyl Coated
Chain-Link Fence, Vinyl Coated
Chain-Link Fence, Galvanized
Barbed Wire, Galvanzied
Chain-Link Fence, Aluminized
Barbed Wire, Aluminized
Chain-Link Fence, Vinyl Coated
Barbed Wire, Vinyl Coated
Barbed Wire, Galvanzied
Tension Wire, Galvanized
Barbed Wire, Aluminized
Tension Wire, Aluminized
Barbed Wire, Vinyl Coated
Tension Wire, Vinyl Coated
Tension Wire, Galvanized
Tension Wire, Aluminized
Iron World
Tension Wire, Vinyl Coated
Chain-Link Fence, Galvanized
Woven Wire
Chain-Link Fence, Aluminized
Chain-Link Fence, Vinyl Coated
Sonco Worldwide, Inc.
Barbed Wire, Galvanzied
Chain-Link Fence, Aluminized
Barbed Wire, Aluminized
Chain-Link Fence, Vinyl Coated
Barbed Wire, Vinyl Coated
Tension Wire, Aluminized
Woven Wire, Galvanized
Tension Wire, Vinyl Coated
Woven Wire, Aluminized
Woven Wire, Vinyl Coated
Master Halco Inc.
Chain-Link Fence, Galvanized
Wheatland Tube Company
Chain-Length Fence, Aluminized
Pipe, WT-40
Chain-Link Fence, Vinyl Coated
Pipe, SCH-40
April 2017
II-A-188
April 2011
List No. 70
(70) APPROVED QA FENCE SUPPLIERS LIST - (Quality Assurance)
Supplier
Location
American Highway Fence, Inc.
Mt. Sterling, Ky
Atlantic Fence Supply
Ashland, VA
Hercules Fence
Ashland, VA
Hercules Fence
Manassas, VA
Hercules Fence
Norfolk, VA
Hercules Fence
York County, VA
Interstate Fence Supply
Mt. Sterling, KY
Long Fence
Chantilly, VA
Master Halco
Ashland, VA
NU-Valley Fence Co., Inc.
Greenville, VA
Webster & Webster Inc.
Verona, VA
(*P) = Probationary
April 2017
II-A-189
List No. 71
(71) POLYETHYLENE SHEETING - (Physical Lab)
Note: PE film (ASTM C 171) used for curing shall be white except that opaque or transparent
PE film may be used between November 1 and April 1.
White
Manufacturer Product Number
Akrotex Films 877141001216 (4 mils, 20 feet wide, white)
Poly America CF0420W (4 mils, 20 feet wide, white)
CF0428W (4 mils, 28 feet wide, white)
CF0620W (6 mils, 20 feet wide, white)
Transparent/Opaque
Manufacturer Product Number
Akrotex Films 877141001193 (4 mils, 20 feet wide, transparent)
Poly America CF0420 (4 mils, 20 feet wide, transparent)
CF0428 (4 mils, 28 feet wide, transparent)
CF0620 (6 mils, 20 feet wide, transparent)
Rodeo Plastic Bag 871222000822 (6 mil, 20 feet wide, transparent)
October 2017
II-A-190
List No. 72
(72) DETECTABLE WARNING PLATES - (Quality Assurance)
Tiles must meet Light on Dark or Dark on Light contrast requirements
Product
Manufacturer
Description
AccessTile Cast in Place
Replaceable
AccessTile
Engineer composite
polymer cast in place
replaceable plate
ADA Solutions (Cast In
Place Composite Tactile)
ADA Solutions, Inc.
Homogenous glass and
carbon composite cast in
place panel
ADA Solutions (Replaceable
composite tactile)
ADA Solutions, Inc.
Homogenous glass and
carbon composite
replaceable (wet set)
plate
ADA Solutions (Surface
Mount Tactile)
ADA Solutions, Inc.
Acceptable for temporary
installations in which the
product would be in
service 6 months or less
AlertCast
AlertTile
Glass reinforced,
thermoset composite
replaceable cast in place
plate
Armorcast Detectable
Warning Wet Set
Replaceable
Armorcast Products
Composite polymer wet
set replaceable plates
Armor-Tile (Cast in Place)
Armor-Tile Tactile Systems
Cast in Place Vitrified
Polymer Composite plate
Armor-Tile (Modular Pavers)
Armor-Tile Tactile Systems
Vitrified polymer paving
system that can be dry
laid on compacted fill or
set in grout
Duralast
East Jordan Iron Works
Gray Iron Detectable
Warning Plates
Neenah Foundry Detectable
Warning Plates
Neenah Foundry
Gray Iron Detectable
Warning Plates.
12” Matte VIP Paver
24” Matte VIP Paver
Nitterhouse Masonry
Products LLC
Masonry Pavers
DWT Tough-EZ
Three D Plastics, Inc
Acceptable for temporary
installations in which the
product would be in
service 6 months or less
Heritage Tile and Versatile
Detectable Warning Device
ACO Polymer Products Inc.
Polymer detectable
warning surface
Detectable Warning Style
Prest Pavers
Hanover Architectural
Products
Hydraulically pressed
concrete pavers
TufTile Wet Set
TufTile, Inc
To be used for permanent
installations High Impact
Polymer Wet-Set
(Replaceable) and the
Cast Iron Tiles Wet-Set
(Relaceable)
October 2017
II-A-191
TufTile Surface Applied
TufTile, Inc.
For use in temporary
installations in service for
6 months or less
High Impact Polymer
Surface Applied Tiles
(Replaceable)
May 2017
II-A-192
List No. 73
(73) APPROVED WHITE AND YELLOW PREFORMED THERMOPLASTIC - (Chemistry Lab)
NOTES:
Pre-Heat = Requires pre-heating the road surface.
Above materials shall be supplied at 125 mils in thickness.
Materials shall be installed in accordance with Manufacturer’s installation instructions.
If material is applied to hydraulic cement concrete, the primer/sealer used shall be listed on the
C-85 (Contractors Daily Log).
During application (when molten) the above materials shall be “flooded” with additional glass
beads conforming to AASHTO M247 Type1.
Manufacturer
Product Name
VDOT Approval No.
WHITE
Ennis-Flint
PreMark
PMM (05)-PA-042
Hot Tape Pre-Heat
PMM (08)-PA-132
Flame Tape Pre-Heat
PMM (08)-PA-059
Swarco
Preformed White
PMM(08)-PA-224
Ozark
Preformed White
PMM-2014-01-134
Geveko Markings
Optamark White
PMM-2015-01-075
YELLOW
Ennis-Flint
PreMark
PMM (02)-PA-065
Geveko Markings
Optamark Yellow
PMM-2015-01-078
June 2017
II-A-193
List No. 74
(74) APPROVED POLYUREA PAVMENT MARKINGS -- (Chemistry Lab)
Manufacture
Color
Product No.
Retroreflective Optics*
NTPEP Submittal No.
Epoplex Corp.
White
LS-90
M247 Type 1 (10lbs./Gal)
Visibead Plus II (10 lbs/Gal)
PMM-2014-01-045
Epoplex Corp.
Yellow
LS-90
M247 Type 1 (10lbs./Gal)
Visibead Plus II (10 lbs/Gal)
PMM-2014-01-046
Epoplex Corp.
White
GM-90
M247 Type 1 (6lbs./Gal)
Visibead PlusII (6 lbs/Gal)
PMM-2006-MS-036
Ennis
White
HPS-5
M247 Type 1 (10 lbs./Gal)
M247 Type 4 (10 lbs./Gal)
PMM-2008-PA-124
Ennis
Yellow
HPS-5
M247 Type 1 (Flood)
M247 Type 4 (Flood)
PMM-2005-PA-050
* Note: The same retroreflective optics materials (Type and quantity (lbs/Gal) used for the
NTPEP testing must be used with these products when installed on VDOT roads.
March 2016
II-A-194
List No. 75
(75) APPROVED EPOXY PAVMENT MARKINGS -- (Chemistry Lab)
Manufacture
Color
Product No.
NTPEP No.
Ennis Traffic Safety
Solutions
White
HPS-3
PMM-08-PA-180
Ennis Traffic Safety
Solutions
Yellow
HPS-3
PMM-08-PA-121
Accent Stripe
White
Lumiline III
PMM-08-PA-110
Accent Stripe
Yellow
Lumiline III
PMM-08-PA-111
Olin Epoxy-POLY-
CARB
White
MARK 55.3
PMM-08-PA-180
Olin Epoxy-POLY-
CARB
Yellow
MARK 55.3
PMM-08-PA-181
Epoplex
White
LS-50
PMM-08-PA-190
Epoplex
Yellow
LS-50
PMM-08-PA-191
April 2017
II-A-195
List No. 76
(76) VIRGINIA GLASS BEAD APPROVED LIST -- (Chemistry Lab)
Manufacturer
Plant
Date Approved
Potters Industries
Pottsdam, NY
July 2008
72 Reynolds Road
Plant Manager Jason Bell
Potters Industries
Apex, NC
Prior to 2006
820 Lufkin Road
Plant Manager Jerry Franks
Swarco Industries
Columbia, TN
October 2015
901 North James Campbell Blvd.
Plant Manager Jeff Johnson
Hillcrest Industries
Attica, NY
March 2017
40 Favor Street
VDOT batches
Plant Contact Lillie Williams
distributed by
(lwilliams@ennisflint.com)
Ennis-Flint.
Note: These manufacturing plants meet the Virginia Glass Bead Acceptance Plan (VGBAP)
described in Materials Division Memorandum, MD 388-15; Revision to the Manual of Instructions
If a glass bead manufacturing plant is not on this list, each batch must be tested and approved by meeting the
requirements in the Materials Division Memorandum, MD 388-15 under Section 1 - Glass Bead Batch
Sampling/Testing Plan.
November 2015
II-A-196
List No. 77
(77) ASPHALT PLUG JOINT SYSTEMS - (Physical Lab)
System
Manufacturer
Thorma-Joint
Dynamic Surface Application, Ltd.
373 Village Road
Pennsdale, PA 17756
800-491-5663
Expandex Joint System
(Wabo-Expandex)
Watson Bowman Acme, Inc.
95 Pineview Drive
Amherst, NY 14228
800-677-4922
Matrix 502
D.S. Brown Company
300 East Cherry St.
North Baltimore, OH 45872
419-257-3561
Matrix 501
Crafco, Inc.
6165 W. Detroit Street
Chandler, AR 85226
(800) 528-8242
FlexAble Bridge Joint System
Deery American Corporation (also Crafco)
1896 Hwy 6 & 50
Grand Jct., CO 81502-4099
800-227-4059
May 2016
II-A-197
List No. 78
(78) APPROVED COLD MIX ASPHALT - (Asphalt Lab)
The following list of cold mix material is approved for use.
Manufacturer
Product
Note
QPR
12735 Morris Road Ste 150
Alpharetta, GA 30004
QPR 2000
Koch Materials Company
1464 Garner Station Blvd.
Suite 311
Raleigh. NC 27603-3634
Styrelf
Heilman Pavement Specialties, Inc.
290 North Pike Road
Sarver, PA 16055-2700
Hei-Way
Seaboard Asphalt Products
3601 Fairfield Road
Baltimore, MD 21226
Bond-x
Bond-x Green
Sylcrete Corporation
P.O. Box 413
South Salem, NY 10590
Sylcrete EV
Logan County Asphalt
2905 Commerce Blvd.
Guthrie, Oklahoma 73044
ProLine Cold Asphalt
The EZ Street Company
1786 NW 82nd Ave
Miami, FL 33126
EZ Street Cold Mix Asphalt
National Paving & Contracting
4200 Menlo Drive
Baltimore, MD 21215
Perma Patch
Unique Paving Material
P.O. Box 764, Route 22
Ramseu, NC 27316
UPM Cold Mix Asphalt Repair
May 2016
II-A-198
List No. 78 (cont.)
RoadStone Production , LLC
1230 River Road
Charlottesville, VA
Aquaphalt (6.0mm, 9.0mm,
12.0mm)
Water activated cold mix
Green Patch Corp
65 Edison Avenue
Mount Vernon, NY 10550
Green Patch
April 2017
II-A-199
List No. 79
(79) MULCHES (HECP TYPES 1-4) (Maintenance Division)
Hydraulic Erosion Control Products shall be dyed green or contain a green dye in the package that will provide a color
to facilitate visual inspection of the uniformly spread slurry. Mulch, including dye and tackifiers, shall not contain
germination-inhibiting or growth-inhibiting factors. The mulch shall be manufactured and processed so that it will
remain in uniform suspension in water under agitation and will blend with seed, fertilizer, and other additives to form
a homogenous slurry. The mulch shall form a blotter-like ground cover on application having moisture absorption and
percolation properties. It shall cover and hold grass seed in direct contact with the soil, promoting the germination and
growth of grass seedlings.
The manufacturer shall provide test reports or certification that all components are pre-packaged by the manufacturer
to assure material performance and compliance with the minimum requirements of Section 244(g)(2) of the 2016
VDOT Road and Bridge Specifications. Under no circumstances will field mixing of HECP additives or HECP
components be allowed. Mulch shall be delivered in packages of uniform weight bearing the name of the manufacturer,
the net weight, and an additional statement of the net dry weight content.
Manufacturers of HECP Products acceptable for use as Erosion Control Mulch:
HECP TYPE 1
HydraGS
North American Green
5401 St. Wendel-Cynthiana Road
Poseyville, Indiana 47633
(800) 772-2040
Conwed Fibers Cellulose
Conwed Fibers EnviroBlend
Conwed Fibers HydroMulch 1000
Conwed Fibers Hydro Mulch 2000
Country Boy Cellulose
EcoBlend
HydroCover Blend
HydroCover Cellulose
HydroSpray Blend
HydroSpray Cellulose
EcoFibre Wood
EcoFibre Plus Tackifier
HydroCover Wood
HydroCover Wood with Tack
HydroSpray Wood
HydroSpray Wood with Tack
MulchPro Blend
MulchPro Wood
MulchPro Wood with Tack
SoilCover Wood
SoilCover Blend
SoilCover Cellulose
SoilCover Wood with Tack
TerraBlend
Terra-Mulch Cellulose
Terra-Wood
Terra-Wood with Tacking Agent 3
Profile Products LLC
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
800-508-8681
April 2017
II-A-200
HECP TYPE 2
HydraGT
North American Green
5401 St. Wendel-Cynthiana Road
Poseyville, Indiana 47633
(800) 772-2040
Terra-Matrix SMM
Profile Products LLC
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
800-508-8681
HECP TYPE 3
HydraCM
North American Green
5401 St. Wendel-Cynthiana Road
Poseyville, Indiana 47633
(800) 772-2040
EcoAegis BFM
EcoMatrix EFM
Hydro-Blanket BFM
ProMatrix EFM
SprayMatt BFM
Profile Products LLC
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
800-508-8681
HECP TYPE 4
HydraCX
North American Green
5401 St. Wendel-Cynthiana Road
Poseyville, Indiana 47633
(800) 772-2040
CocoFlex ET-FGM
EcoFlex HP-FGM
Flexterra HP-FGM
SprayMatrix Fiber Reinforced Matrix (FRM)
Profile Products LLC
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
800-508-8681
July 2017
II-A-201
List No. 80
(80) TEMPORARY ROLLED EROSION CONTROL PRODUCTS (EC-2 TYPES 1 THRU 4) (Location &
Design)
Soil retention mats shall consist of a machine-produced mat of wood fibers, wood excelsior, or manmade fiber that
shall intertwine or interlock. Matting shall be nontoxic to vegetation and germination of seed and shall not be
injurious to the unprotected skin of the human body. The manufacturer shall provide test reports or certification that
all components are pre-packaged by the manufacturer to assure material performance and compliance with the
minimum requirements for EC-2 materials set forth in Section 244(l) of the 2016 VDOT Road and Bridge
Specifications.
A product with a higher EC-2 Type number may be substituted for a product with a lower EC-2 Type number if that
is cost-effective to the contractor and results in no additional cost to VDOT. For example, EC-2 Type 2 may be
substituted for EC-2 Type 1; EC-2 Type 4 may be substituted for any of the lower-numbered EC-2 Types.
Manufacturers of EC-2 Products acceptable for use as Temporary Rolled Erosion Control Mulch:
EC-2, TYPE 1
ECS-1 Single Net Straw
ECS-1B Single Net Straw Biodegradable
ECX-1 Single Net Excelsior
ECS-2B Double Net Straw Biodegradable
East Coast Erosion Control
443 Bricker Road
Bearnville, Pennsylvania 19506
(610) 448-8496
Curlex I CL
American Excelsior Company
831 Pioneer Avenue
Rice Lake, Wisconsin 54868
(715) 236-6861
Excel SR-1
Western Excelsior
901 Grand Avenue
Mancos, CO 81328
800-833-8573
S75
North American Green
5401 St. Wendel-Cynthiana Road
Poseyville, Indiana 47633
(800) 772-2040
TerraGuard SS
Hanes Geo Components
815 Buxton Street
Winston Salem, NC 27101
888-239-4539
EC-2, TYPE 2
S150
North American Green
5401 St. Wendel-Cynthiana Road
Poseyville, Indiana 47633
(800) 772-2040
ECS-2 Double Net Straw
ECSC-2B Double Net Straw/Coconut
East Coast Erosion Control
443 Bricker Road
Bearnville, Pennsylvania 19506
(610) 448-8496
TerraGuard DS
Hanes Geo Components
815 Buxton Street
Winston Salem, NC 27101
888-239-4539
Nedia S400
Nedia Enterprises, Inc.
July 2017
II-A-202
44675 Cape Court, Suite 120
Ashburn, VA 20147
(888) 725-6999
Excel SS-2
Western Excelsior
901 Grand Avenue
Mancos, CO 81328
800-833-8573
EC-2, TYPE 3
ECC-2B Double Net Coconut Biodegradable
ECSC-2 Double Net Straw/Coconut
ECX-2 Double Net Excelsior
East Coast Erosion Control
443 Bricker Road
Bearnville, Pennsylvania 19506
(610) 448-8496
Nedia SC-400
Nedia SC-400B
Nedia Enterprises, Inc.
44675 Cape Court, Suite 120
Ashburn, VA 20147
(888) 725-6999
Excel R-2
Western Excelsior
901 Grand Avenue
Mancos, CO 81328
800-833-8573
SC150
North American Green
5401 St. Wendel-Cynthiana Road
Poseyville, Indiana 47633
(800) 772-2040
TerraGuard DSC
Hanes Geo Components
815 Buxton Street
Winston Salem, NC 27101
888-239-4539
EC-2, TYPE 4
ECC-2 Double Net Coconut
East Coast Erosion Control
443 Bricker Road
Bearnville, Pennsylvania 19506
(610) 448-8496
Curlex III
Curlex High Velocity
American Excelsior Company
831 Pioneer Avenue
Rice Lake, Wisconsin 54868
(715) 236-6861
Nedia C400
Nedia C400B
Nedia Enterprises, Inc.
44675 Cape Court, Suite 120
Ashburn, VA 20147
(888) 725-6999
Excel CC-4
Western Excelsior
901 Grand Avenue
Mancos, CO 81328
800-833-8573
TerraGuard DC
Hanes Geo Components
815 Buxton Street
Winston Salem, NC 27101
888-239-4539
April 2017
II-A-203
List No. 81
(81) PERMANENT ROLLED EROSION CONTROL PRODUCTS (EC-3 TYPES 1 THRU 3) (Location &
Design)
Soil retention mats shall consist of a machine-produced mat of wood fibers, wood excelsior, or manmade fiber that
shall intertwine or interlock. Matting shall be nontoxic to vegetation and germination of seed and shall not be injurious
to the unprotected skin of the human body. The manufacturer shall provide test reports or certification that all
components are pre-packaged by the manufacturer to assure material performance and compliance with the minimum
requirements for EC-3 materials set forth in Section 244(l) of the 2016 VDOT Road and Bridge Specifications.
A product with a higher EC-3 Type number may be substituted for a product with a lower EC-3 Type number if that
is cost-effective to the contractor and results in no additional cost to VDOT. For example, EC-3 Type 2 may be
substituted for EC-3 Type 1; EC-2 Type 3 may be substituted for any of the lower-numbered EC-3 Types.
Manufacturers of EC-3 Products acceptable for use as Rolled Erosion Control Mulch:
EC-3, TYPE 1
Nedia PTRM 340
Nedia Enterprises, Inc.
44675 Cape Court, Suite 120
Ashburn, VA 20147
(888) 725-6999
EC-3, TYPE 2
Nedia PTRM 440
Nedia Enterprises, Inc.
44675 Cape Court, Suite 120
Ashburn, VA 20147
(888) 725-6999
LandLok 435
Propex GeoSolutions
4019 Industry Drive
Chattanooga, TN 37416
(800) 621-1273
EC-3, TYPE 3
ECP-2 10-oz. Double Net Poly
ECP-2 Double Net Poly
ECP-3 Triple Net Poly
East Coast Erosion Control
443 Bricker Road
Bearnville, Pennsylvania 19506
(610) 448-8496
Nedia PTRM 640
Nedia Enterprises, Inc.
44675 Cape Court, Suite 120
Ashburn, VA 20147
(888) 725-6999
AEC Recyclex TRM-V
AEC Recyclex TRM
American Excelsior Company
831 Pioneer Avenue
Rice Lake, Wisconsin 54868
(715) 236-6861
SC250
C350
North American Green
5401 St. Wendel-Cynthiana Road
Poseyville, Indiana 47633
(800) 772-2040
ArmorMax 75
PyraMat 25
PyraMat 50
PyraMat 75
LandLok 450
Propex GeoSolutions
4019 Industry Drive
Chattanooga, TN 37416
(800) 621-1273
February 2017
II-A-204
List No. 82
(82) BIOLOGICAL GROWTH STIMULANTS (Maintenance Division)
Manufacturers of HECP Products acceptable for use as Biological Growth Stimulants:
BioPrime
JumpStart
Profile Products LLC
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
800-508-8681
April 2017
II-A-205
List No. 83
(83) SEDIMENT RETENTION ROLLS (COMPOST FILTER SOCKS AND SEDIMENT TUBES
(Location & Design)
COMPOST FILTER SOCKS (MINIMUM 12” DIAMETER)
Filtrexx 5 mil High Density Polyethylene
(HDPE) Photodegradable
Filtrexx Multi-Filament Polypropylene
(MFPP)
Filtrexx Multi-Filament Polypropylene
DuraSoxx (Heavy Duty)
Filtrexx Multi-Filament Polypropylene
DuraSoxx
Filtrexx Multi-Filament Polypropylene
SafetySoxx
Filtrexx International
244 Third Avenue
Decatur, GA 30030
(404) 687-8393
SEDIMENT TUBES (MINIMUM 18” DIAMETER)
Curlex Sediment Log
Premier Straw Wattle
American Excelsior Company
831 Pioneer Ave.
Rice Lake, WI 54868
(715) 226-5643
Terra-Tubes Fiber Filtration Tube (FFT)
Profile Products LLC
750 Lake Cook Road, Suite 440
Buffalo Grove, IL 60089
800-508-8681
August 2016
II-A-206
List No. 84
(84) CLASS B MANUFACTURED TOPSOIL (Maintenance Division)
List to be populated starting August 2016
January 2018
II-A-207
List No. 85
(85) CEMENT MANUFACTURERS - (Physical Lab)
The following list of cement manufacturers is approved for use in hydraulic cement concrete. To have a product
included on the Approved List No. 85 for Cement Manufacturers, the following shall be submitted to the Materials
Division’s Physical Laboratory Assistant Concrete Program Manager: a letter with a notarized signature
documenting that each cement type used on VDOT projects meets the requirements in Section 214 of the VDOT
Road and Bridge Specifications. The letter shall include the maximum alkali content that the cement will not exceed
for the calendar year. The percent mineral admixture for the types of blended cement that has a mineral admixture
added. A one gallon sample of cement with the corresponding mill certification shall also be submitted for each type
of cement.
Upon approval, the Cement Manufacturer will be required to submit a letter with a notarized signature stating that
the cement meets the VDOT requirements, annually by December documenting the maximum alkalinity content for
the following calendar year for each type of cement. Mill certification shall be submitted monthly and a gallon
sample shall be submitted each quarter.
Cement Source
Type
Plant ID
Maximum Alkali
Content (%)
Remarks
Argos
Calera, AL
I / II
111
0.60
Roberta Plant
Devnya, Bulgaria
I / II LA
76
0.60
Mylaki, Greece
Í/II
85
0.60
Harleyville, South Carolina
I/II/III
20
0.60
Martinsburg, WV
I/II/III
12
1.00
Martinsburg, WV
II LA
12
0.60
Newberry, FL
Í/II
108
0.60
Cemex
Knoxville, TN
I / II
15
0.60
Federal White Cement
Woodstock, Ontario Canada
I
112
0.35
Giant Cement Company
Harleyville, SC
I/II
52
0.60
Keystone Cement
Bath PA
II
114
0.80
Lafarge/Holcim
Hagerstown, MD
I / II / III
25
1.0
Holly Hill, SC
I / II / III
16
0.60
Holly Hill, SC
IL
16
0.60
Lehigh Heidelberg Cement Group
Canakkale, TR
I / II
73
0.60
Akcansa Cement
Evansville, PA
I/II/III
83
1.00
Union Bridge, MD
I/II / III
10
0.60
January 2018
II-A-208
List No. 85 (cont.)
CEMENT MANUFACTURERS (cont.)
Cement Source
Type
Plant ID
Maximum Alkali
Content (%)
Remarks
Roanoke Cement
Kamari plant, Greece
I/II
62
0.59
Huaxin plant, China
I/II
97
0.60
Patras Plant, Greece
I/II
93
0.59
Roanoke Plant, Troutville, VA
I/II/III
6
0.75
Roanoke Plant, Troutville, VA
IL
6
0.75
BLENDED CEMENTS
In order to comply with the VDOT Road and Bridge Specifications Sec. 217, additional mineral admixtures may
need to be added.
Cement Source
Type
Plant ID
Maximum Alkali
Content (%)
Remarks
Lafarge/Holcim
Holly Hill, SC
IS(20)
16
0.60
*In order to comply with
the VDOT Road and
Bridge Specifications Sec.
217, additional mineral
admixtures will need to be
added.
Lehigh Heidelberg Cement Group
Evansville, PA
IS(40)
83
0.95
*In order to comply with
the VDOT Road and
Bridge Specifications Sec.
217, additional mineral
admixtures will need to be
added.
October 2017
II-A-209
(86) MANUFACTURED TREATMENT DEVICES - (Location & Design)
HYDRODYNAMIC DEVICES
Device
Model(s)
Contact Information
Aqua-Swirl®
Stormwater
Treatment System
AS-2, AS-3, AS-4, AS-5, AS-6, AS-
7, AS-8, AS-9, AS-10, AS-11, AS-
12, AS-13, and AS-XX (custom)
AquaShield™, Inc.
2733 Kanasita Drive, Suite 111
Chattanooga, Tennessee 37343
www.aquashieldinc.com
Contact: Northern Virginia (908) 284-5041
Contact: (704) 814-0603
BaySeparator™
½K, 1K, 3K, 5K, 10K, and XK
(custom)
ADS/BaySaver Technologies
1030 Deer Hollow Drive
Mt. Airy, Maryland 21771
www.baysaver.com
Contact: (540) 526-6045 Contact: (800) 229-7283
Continuous
Deflective
Separator® (CDS)
CDS2015-4, CDS2015-5, CDS2020-
5, CDS2025-5, CDS3020-6,
CDS3025-6, CDS3030-6, CDS3035-
6, CDS3535-7, CDS4030-8,
CDS4040-8, CDS4045-8, CDS5640-
10, CDS5653-10, CDS7070-DV,
CDS10060-DV, CDS10080-DV, and
CVS100100-DV
Contech® Engineered Solutions LLC
Stormwater Design Engineering
7037 Ridge Road, Suite 350
Hanover, MD 21076
www.ContechES.com
Contact: (410) 740-8490
CrystalClean
Separator Single
Vault
646, 846, 856, 866, 956, 1056, and
1266
CrystalStream Technologies
2090 Sugarloaf Parkway, Suite 245
Lawrenceville, Georgia 30045
www.crystalstream.com
Contact: (800) 748-6945
Downstream
Defender®
DD4, DD6, DD8, DD10, and DD12
Hydro International
94 Hutchins Drive
Portland, Maine 04102
www.hydro-int.com
Contact: Virginia (804) 614-6638
Contact: Corporate Office (207) 239-8997
Dual Vortex
Separator (DVS)
DVS-36C, DVS-36S, DVS-48C,
DVS-48S, DVS-60C, DVS-60S,
DVS-72C, DVS-72S, DVS-84C,
DVS-84S, DVS-96C, DVS-96S,
DVS-120C, DVS-120S, DVS-144C,
and DVS-144S
Oldcastle Precast, Inc.
5115 Massaponax Church Road
Fredericksburg, VA 22407
oldcastleprecast.com
Contact: (800) 579-8819
First Defense®
3, 4, 6, 8 feet diameter
Hydro International
94 Hutchins Drive
Portland, Maine 04102
www.hydro-int.com
Contact: Virginia (804) 614-6638
Contact: Corporate Office (207) 239-8997
October 2017
II-A-210
Hydroguard
HG 4, HG 4i, HG 5, HG 6, HG 7,
HG 8, HG 9, HG 10, and HG 12
Hydroworks, LLC
136 Central Avenue, 2nd Floor
Clark, New Jersey 07066
www.hydroworks.com
Contact: Hydroworks, LLC (888) 290-7900
Contact: Exact Stormwater Management LLC (804)
627-3260
Stormceptor® OSR
OSR 065, OSR 140, OSR 250, OSR
390, OSR 560, OSR 780, and OSR
1125
Rinker Materials - Stormceptor OSR
1751 Monocacy Boulevard
Frederick, Maryland 21707
www.rinkerpipe.com/StormceptorProducts/Stormcep
tor.aspx
Contact: (301) 698-7373
Stormceptor® STC
STC 450i, STC 900, STC 1200, STC
1200, STC 1800, STC 2400, STC
3600, STC 4800, STC 6000, STC
7200, STC 11000, STC 13000 and
STC 16000
Rinker Materials - Stormceptor
1751 Monocacy Boulevard
Frederick, Maryland 21707
www.rinkerpipe.com/StormceptorProducts/Stormcep
tor.aspx
Contact: (301) 698-7373
StormPro
24, 36, 48, 510, 612, 714, 816, 918,
1020, 1224, and 2040
Environment 21, LLC
8713 Read Road
East Pembroke, NY 14056-0055
www.env21.com
Contact: Environment 21, LLC (585) 815-4714
Contact: Nansemond Precast (757) 538-2761
Contact: Maryland Concrete (443) 491-3598
Storm Water
Quality Unit
3620WQA, 3640WQA, 3620WQB,
3640WQB 4220WQA, 4240WQA,
4220WQB, 4240WQB, 4820WQA,
4840WQA, 4820WQB, 4840WQB,
6020WQA, 6040WQA, 6020WQB,
and 6040WQB
Advanced Drainage Systems, Inc.
70 Inwood Road, Suite 3
Rocky Hill, CT 06067
www.ads-pipe.com
Contact: (609) 707-1576
Contact: (888) 892-2694
V2B1
2 to 40
Environment 21, LLC
8713 Read Road
East Pembroke, NY 14056-0055
www.env21.com
Contact: Environment 21, LLC (585) 815-4714
Contact: Nansemond Precast (757) 538-2761
Contact: Maryland Concrete (443) 491-3598
The Vortechs®
System
1000, 2000, 3000, 4000, 5000, 7000,
9000, 11000, and 16000
Contech® Engineered Solutions LLC
Stormwater Design Engineering
7037 Ridge Road, Suite 350, Hanover
MD 21076
www.ContechES.com
Contact: (410) 740-8490
FILTER DEVICES
Device
Model(s)
Contact Information
Aqua-Filter™
Stormwater
Filtration System
AF-2.1, AF-3.2, AF-4.3, AF-5.4, AF-
6.6, AF-7.8, AF-8.10, AF-9.12, AF-
10.15, AF-11.18, AF-12.11 Twin,
AF-13.13 Twin, and AF-X.X
(custom)
AquaShield™, Inc.
2733 Kanasita Drive, Suite 111
Chattanooga, Tennessee 37343
www.aquashieldinc.com
Contact: Northern Virginia (908) 284-5041
Contact: (704) 814-0603
October 2017
II-A-211
BayFilter™
Stormwater
Cartridge System
522, 530, 545
ADS/BaySaver Technologies
1030 Deer Hollow Drive
Mt. Airy, Maryland 21771
www.baysaver.com
Contact: (540) 526-6045 Contact: (800) 229-7283
Filterra
Bioretention
Systems
4x6/6x4, 4x8/8x4, 6x6, 6x8/8x6,
6x10/10x6, 6x12/12x6, 7x13/13x7,
and custom
Contech® Engineered Solutions LLC
Stormwater Design Engineering
7037 Ridge Road, Suite 350
Hanover, MD 21076
www.ContechES.com
Contact: (410) 740-8490
FocalPoint
HighPerformance
ModularBiofiltratio
n System(HPMBS)
Modular with custom design as
indicated on approved plans
Convergent Water Technologies/ACF Environmental
13810 Hollister Road #100
Houston, Texas 77086
www.convergentwater.com/www.acfenvironmental.c
om
Contact: Convergent Water Tech. (800) 711-5428
Contact: ACF Environmental (800) 448-3636
Jellyfish® Filter
JF4, JF6, JF8M JF10, JF12, and
custom
Contech® Engineered Solutions LLC
Stormwater Design Engineering
7037 Ridge Road, Suite 350
Hanover, MD 21076
www.ContechES.com
Contact: (410) 740-8490
Perk Filter
4' x 8', 6' x 8', 6' x 10', 6' x 12', 6' x
14', 8' x 8', 8' x 14', 8' x 16', and Box
Culvert and other custom sizes
Oldcastle Precast, Inc.
5115 Massaponax Church Road
Fredericksburg, VA 22407
oldcastleprecast.com
Contact: (800) 579-8819
The Stormwater
Management
StormFilter® with
Phosphosorb media
SFCBx, SFMHxx, SFxxxx,
SFLGxxxx, SFCIxxxx, SFPDxxxx,
and custom design (x, xx, and xxxx
vary by size and configuration)
Contech® Engineered Solutions LLC
Stormwater Design Engineering
7037 Ridge Road, Suite 350
Hanover, MD 21076
www.ContechES.com
Contact: (410) 740-8490
The Stormwater
Management
StormFilter® with
ZPG media
SFCBx, SFMHxx, SFxxxx,
SFLGxxxx, SFCIxxxx, SFPDxxxx,
and custom design (x, xx, and xxxx
vary by size and configuration)
Contech® Engineered Solutions LLC
Stormwater Design Engineering
7037 Ridge Road, Suite 350
Hanover, MD 21076
www.ContechES.com
Contact: (410) 740-8490
StormTank Module
Debris Row
Modular Underground Storage with
Built-in Treatment
Brentwood Industries
500 Spring Ridge Drive
Reading, PA 19160
www.brentwoodindustries.com
Contact: (610) 374-5109
StormTech®
Isolator Row™
SC-310, RC310, SC-740, RC-750,
DC-780, DC-780, MC-3500, and
MC-4500
ADS/StormTech
70 Inwood Road, Suite 3
Rocky Hill, CT 06067
www.stormtech.com
Contact: (609) 707-1576
Contact: (888) 892-2694
October 2017
II-A-212
Up-Flo Filter®
with CPZ media
UFF 4-feet Diameter MH (1-6 filter
modules), UFF Precast Vault (1-54
filter modules), and custom design
Hydro International
94 Hutchins Drive
Portland, Maine 04102
www.hydro-int.com
Contact: Virginia (804) 614-6638
Contact: Corporate Office (207) 239-8997
January 2018
II-A-213
List No. 87
(87) APPROVED POWDER COATING MANUFACTURERS (Chemistry Lab)
Nortek Powder Coating, LLC Polytech Coating Labs
5900 Success Drive P.O. Box 111
Rome, NY 13440 951 Morgantown Road
Ph: (888) 667-8357 Reading, PA. 19607
www.nortekpowder.com Ph: (610) 375-1417
www.polytechcoatinglabs.com
Protech, Inc. TCI Powder Coatings
939 Monocacy Road P.O. Box 13
York, PA. 17404 734 Dixon Drive
Ph: (713) 939-4000 Ellaville, GA. 31806
www.protechpowder.com Ph: (800) 533-9067
www.tcipowder.com
Tiger Drylac USA Inc.
1100 Commons Boulevard
Reading, PA. 19605
Ph: (610) 926-8148
www.customerserviceeast@tiger-coatings.com
January 2018
II-A-214
List No. 88
(88) APPROVED POWDER COATING FACILITIES OF GALVANIZED SURFACES (Chemistry Lab)
ASAP Powder Coating, Inc.* Fortress Fusion Coatings, Inc
9724 Williamsport Pike P.O. Box 37
Falling Waters, WV 25419-3538 New York Mills, NY 13417
Ph: (304) 274-3200 Ph: (315) 736-8311
www.asappowdercoating.com www.whyrust.com
ASCO American Stripping Co.* Impreglon Inc.*
9025 Vassau Court 2915 Wilmarco Avenue
Manassas Park, VA. 20111 Baltimore, MD. 21223
Ph: (703) 368-6573 Ph: (410) 644-4500
www.ascoweb.com
Frederick County Customs Lane Enterprises
441 Marple Road 1244 Claremont Road
Winchester, VA. 22603 Carlisle, PA. 17013
(540) 323-7518 Ph: (717) 249-8342
frederickcountycustoms@comcast.net www.lane-enterprises.com
Thomarios Powder Coating
1122 Jacoby Road
Copley, OH. 44321
Ph: (330) 670-6400
www.thomarios.com
*Provisional Approval

Navigation menu