83V5 BS83V5F User Guide Healthy Home Pro Heat

User Manual: 83V5

Open the PDF directly: View PDF PDF.
Page Count: 20

2Thank You
USER'S GUIDE
83V5 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
Troubleshooting
Replacement Parts
3
4-5
6
7-14
15
16-17
18
Accessories and Formulas
Warranty
Consumer Care
18
19
20
www.bissell.com
Thanks for buying a BISSELL Healthy Home ProHeat™ Deep Cleaner
We’re glad you purchased a BISSELL Healthy Home ProHeat deep cleaner.
Everything we know about floor care went into the design and construction
of this complete, high-tech home cleaning system.
Your BISSELL Healthy Home ProHeat deep cleaner is well made, and we
back it with a limited two year warranty. We also stand behind it with a
knowledgeable, dedicated Consumer Care department, so, should you ever
have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL
is a global leader in the design, manufacture, and service of high quality
homecare products like your BISSELL Healthy Home ProHeat deep cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman CEO
2
www.bissell.com
IMPORTANT SAFETY INSTRUCTIONS
3
When using an electrical
appliance,
basic precautions should be observed,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
DEEP CLEANER.
Always connect to a properly Earthed
outlet. Unplug from outlet when not in use
and before conducting maintenance or
troubleshooting.
WARNING: To
reduce the risk of fire,
electric shock, or injury:
Use indoors only
Do not immerse; use only on surfaces
moistened by cleaning process
Do not leave machine when it is plugged in
Do not service machine when it is plugged in
If the supply cord is damaged, it must
be replaced by the manufacturer or its
service agent in order to avoid a hazard
Do not use machine if it has been
dropped, damaged, left outdoors or
dropped into water
Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces
Do not carry the appliance while in use
Do not unplug by pulling on cord;
unplug by grasping plug not the cord
Do not handle plug or appliance with
wet hands
Do not put any object into appliance openings,
use with blocked opening or restrict air flow
Do not expose hair, loose clothing, fingers
or body parts to openings or moving parts
Do not pick up hot or burning objects
Do not pick up flammable or combustible
materials (lighter fluid, petrol, kerosene,
etc.) or use in the presence of explosive
liquids or vapours
Do not use appliance in an enclosed space
filled with vapours given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other
explosive or toxic vapours
Do not operate the appliance unless the
belt door is securely assembled in the
location provided
Remove plug from electrical outlet before
cleaning or maintaining the appliance
Not intended for use by persons (including
children) with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have been
given supervision or instruction concerning
use of the appliance by a person respon-
sible for their safety
Young children should be supervised to ensure
that they do not play with the appliance
Do not pick up toxic material (chlorine
bleach, ammonia, drain cleaner, petrol, etc.)
Do not modify the Earthed plug
Do not use for any purpose other than
described in this User’s Guide
Use only manufacturer’s recommended
attachments
Use only cleaning products formulated
by BISSELL for use in this appliance to
prevent internal component damage
Keep openings free of dust, lint, hair, etc.
Keep appliance on a level surface
Turn off all controls before unplugging
Be extra careful when cleaning stairs
Pay close attention when working
around children
SAVE THESE
INSTRUCTIONS
FOR FUTURE USE
This model is for household use only.
WARNING:
This appliance must be Earthed
.
IMPORTANT
FOR OPERATION ON A 220-240 VOLT
A.C. 50/60 Hz POWER SUPPLY ONLY.
If your appliance is fitted with a
nonrewireable BS 1363 plug it must not be
used unless a 13 amp (ASTA approved to BS
1362) fuse is fitted in the carrier contained
in the plug. (Spares may be obtained from
your BISSELL supplier). If for any reason the
plug is cut off, it must be disposed of, as it is
an electric shock hazard should it be inserted
into a 13 amp socket.
www.bissell.com
4
Product view
DirtLifter
PowerBrush
Belt Access Door
ReadyTools Dial
Removable Nozzle
Ergonomically
Designed Handle
Handle Assembly
Lower Body Assembly
Heater Switch:
Turn heat on or off
as needed
EdgeSweep Brushes
Integrated Carry Handle
Heat Indicator
Light/Built-in
Hot Water Heater
www.bissell.com
Product view
5
Quick Release
Cord Wrap
Power Cord
Spray Trigger
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protect
whenever it fits your schedule. Always use genuine BISSELL cleaning formulas.
Non-BISSELL cleaning formulas may harm the machine and will void the warranty.
WARNING:
To reduce the risk of fire and
electric shock due to internal com-
ponent damage, use only BISSELL
cleaning formulas intended for use
with the deep cleaner. Non-BISSELL
cleaning formulas may harm the
machine and void the warranty.
Large, Easy-To-
Maneuver Wheels
Ready-to-Use
Hose
Hose Secure Latch
Handle Release
Power Switch
2-in-1 Water Tank
Includes built in formula
measuring cup
Cord Clip
Tough Stain
Tool
Cleaning formula:
709 mL BISSELL
2X Fibre
Cleansing
Advanced
Formula with
Scotchgard
protector
#62E5-E
709 mL BISSELL
2X Healthy Home
Multi-Allergen
Advanced
Formula with
Scotchgard
protector
#31W6-E
709 mL BISSELL
2X Pet Stain &
Odor Advanced
Formula with
Scotchgard
protector
#99K5-E
709 mL BISSELL
2X Natural
Orange
Advanced
Formula with
Scotchgard
protector
#83P3-E
709 mL BISSELL
2X Lavendar
Essence
Advanced
Formula with
Scotchgard
protector
#34B5-E
651 mL
Tough Stain
Precleaner
#0400-E
www.bissell.com
Assembly
6
Your Healthy Home ProHeat deep
cleaner comes in four easy to
assemble components:
•Handleassembly
•Upperhoserack
•Lowerbodyassembly
•Lowerhoserack
FourPhillipsheadscrewsareincluded,
2 long and 2 short. They can be found
taped to the handle assembly.
Theonlytoolyouwillneedtoassemble
your cleaner is a Phillips head
screwdriver.
1. Slide handle assembly onto lower body
and secure with two long screws.
2. Attach upper hose rack to back of handle
assembly by pushing into open slots and
sliding down until it snaps into place.
3. Attach lower hose rack by sliding in place
on lower body assembly and securing
with 2 short screws.
4. Attach Tough Stain tool to end of hose.
5. Wrap flex hose around hose rack
and secure it into notched out holder
as shown.
6. Keep flex hose locked in place with hose
secure latch.
Hose Secure Latch
WARNING:
Do not plug in your cleaner
until you have completely
assembled it per the
instructions and are familiar
with all instructions and
operating procedures.
Tip: Deep cleaning carpeting
regularly can reduce dust and
allergens in your home.
1.
2.
3.
4.
6.
5.
www.bissell.com
7
Operations
Special features
Built-In-Heater
BISSELL ProHeat models all feature a patented
built-in heater which will heat the hand hot
tap water you put in it to safely optimize
cleaning effectiveness. The heater will never
allow the temperature to exceed 82°C degrees.
The heater switch, which is located on the side
of the machine, controls the heater so you have
the option to turn off the heat if you are
cleaning delicate wool or oriental rugs.
DirtLifter™PowerBrush
The DirtLifter PowerBrush is designed to
enhance cleaning performance. The bristle
pattern safely lifts out the deep down dirt while
gently grooming carpet fibers. The floating suspen-
sion self-adjusts to all carpet heights. When the
power is ON and the machine is in the upright
position, your carpet is protected because the
brushes are lifted up off the carpet.
ReadyTools™Dial
The ReadyTools feature allows you to choose
between FLOOR CLEANING or cleaning with
TOOLS simply by turning the dial. The TOOLS
setting allows for above floor cleaning of
upholstery, stairs, along baseboards, and other
hard to reach areas. Simply choose the tool that
is appropriate for the job, attach to flex hose and
you are ready to go.
Microban® antibacterial
product protection
Microban antibacterial product protection is built
into key components to help prevent the growth of
harmful common household bacteria. It helps to
keep the unit fresher and cleaner between uses. Heater
Switch
WARNING:
To reduce the risk of fire, use only BISSELL
advanced cleaning formula for full size
machines in your deep cleaner. Use of
cleaning formulas that contain lemon or
pine oil may damage this appliance and
void the warranty. Chemical spot cleaners
or solvent-based soil removers should not
be used. These products may react with the
plastic materials used in your deep cleaner
causing cracking or pitting.
ReadyTools
Dial
More than 7 million Australians
suffer from asthma and allergies.
The Sensitive Choice program has
been developed by the National
Asthma Council Australia to help
Australians and New Zealanders
make better lifestyle choices that
may help manage asthma and
allergies more effectively.
The BISSELL range of deep carpet
cleaners and deep carpet
cleaning formulas has been
approved by the National Asthma
Council Australia’s Sensitive
Choice program, and carries the
Sensitive Choice butterfly logo.
The Sensitive Choice blue butterfly
symbol is a way of recognising
products and services that support
asthma and allergy care. Products
that carry the blue butterfly may
be better choices for people with
asthma and allergies.
To learn more about managing
asthma and allergies, visit the
Sensitive Choice website at:
www.sensitivechoice.com.au
www.bissell.com
Operations
8
Special features continued
Scotchgard Protector
Carpet protection applied at the mill typically
wears down over time from heavy foot traffic
and everyday cleaning, including deep
cleaning. To help restore this important
protection, only BISSELL offers cleaning
formulas with Scotchgard protector. This offers
extra protection against dirt and tough stains
to keep your carpets looking good longer.
Measuring cup
Your deep cleaner is equipped with a
measuring cup for adding the proper amount
of formula to the 2-in-1 water tank. For
convenience the measuring cup is built into
the lid of the 2-in-1 water tank.
2-in-1watertank
Our 2-in-1 water tank system is designed with
a heavy duty bladder inside for clean water.
As you clean, the clean water and formula in
the bladder will empty. Dirty water pulled out
of your carpet will collect around the outside
of the bladder so clean and dirty water are
always kept separate. This allows the user to
maximize tank space, yet only carry one tank
to and from the sink for emptying and filling.
Removablenozzle
Cleaning up your machine after you're done
has never been easier! Nozzle pops off for
rinsing in the sink.
Measuring
Cup
Carry
Handle
www.bissell.com
9
Operations
Before you clean
1. Plan activities to give your carpet time
to dry.
2. Movefurniture to another area if
cleaning an entire room (optional).
3. Vacuum area with a dry vacuum
cleaner before deep cleaning.
4. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the cor-
ner farthest from your exit.
5. Pretreating (optional)
Pretreatingisrecommendedtoimprove
cleaningeffectivenessforheavilysoiled
carpet in high traffic areas such as entry
waysandhallways.
To pretreat:
A. Using the BISSELL Tough Stain
Precleaner, generously spray evenly
over soiled area, do not overwet.
B. Wait 3-5 minutes before deep
cleaning.
C. Clean as normal using your BISSELL
deep cleaner. ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the
same area with an ordinary
vacuum or deep cleaner may
aggravate this condition.
2
4'
3'
1
3
4
5
6
7
9
10
11
12
EXIT
START
HERE
www.bissell.com
Operations
10
Fillthe2-in-1watertank
1. Remove the tank from the base of the
machine by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. Remove
lid, turn over and locate built in measuring
cup.
3. Fill formula to the indicated fill line on
the built in measuring cup and pour into
mouth of the bladder.
4. Fill the bladder with clean hand hot tap
water.
*Donotboilormicrowavewater
as it can destroy the bladder.
5. Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace
lid. Rotate the handle to the carrying
position to latch the lid.
Note: Remember to secure the lid
andtesttomakesureitissecure
beforepickingupthetank.
6. Place tank into machine base, seating firmly
in place. Rotate tank handle back into
latched position.
1.
3.
5.
2.
4.
6.
www.bissell.com
11
Operations
Carpet cleaning
1. Plug the deep cleaner into a proper
outlet. Set ReadyTools dial to the FLOOR
CLEANING setting. Turn the power on
by pressing the red power switch on
the back of the unit with your foot. Turn
heater switch (located on side of unit)
to the on position. Allow one minute for
the built-in heater to warm up before
cleaning.
NOTE: The Heathly Home ProHeat
willbefullywarmedandwill
provideoptimalperformanceafter
one minute of continuous heated
cleaning.
2. With your foot, press the gray handle
release lever located on the back of unit
below water tank to detent handle.
3. While pressing the spray trigger, make
one slow forward wet pass and another
back. Let the built-in heater, BISSELL
advanced deep cleaning formula and
DirtLifter PowerBrush do the work for
you. Caution:Donotoverwet.
4. Release the spray trigger and make one
slow forward and backward pass over
the same area to remove any residual
dirty water and aid in drying.
5. Repeat cleaning passes until solution
being suctioned up appears clean.
Continue passes without pressing the
spray trigger until you can’t see any
more water being suctioned up.
Tip:
Thorough vacuuming before deep
cleaning will prevent early clogging
of the lint trap.
WARNING:
To reduce the risk of fire and
electric shock due to internal
component damage, use
only BISSELL cleaning
formulas intended for use
with the deep cleaner.
Non-BISSELL cleaning
formulas may harm the
machine and void the
warranty.
Handle Release
Heater Switch
www.bissell.com
Operations
12
1. Turn power switch off. Remove the 2-in-1
water tank from the base using the tank
carry handle. Carry the tank like a bucket to
a utility sink or outside where you will
dispose of the collection water. Remove the
top of the tank by rotating the handle for-
ward to unlatch lid and lifting lid off tank.
2. Empty collection water from bottom of tank.
3. After each use, remove and rinse the lint
screen located on the tank lid.
4. If nozzle needs to be cleaned, remove by
grasping handle at the top and pulling
forward. Clean removable nozzle by
rinsing under running water.
5. When finished, replace nozzle by slightly
raising front of machine to line up slots on
the base with the hooks on nozzle. Attach at
base first and then click nozzle into place.
NOTE:Ifnozzleisnotattached
properlylossofsuctionwilloccur.
6. To continue carpet cleaning, refer back to
pages 10 through 11, beginning with “Fill
the 2-in-1 water tank” on page 10.
Ifcleaningiscomplete,refertothe
“Maintenance and care” section on page 15.
ReadyTools™
Your Heathly Home ProHeat deep cleaner
comesequippedwithahoseandatleast
oneattachmentforcleaningstairs,
upholstery,andmore.
Important! If using the machine to clean
upholstery,checkupholsterytags.
1. Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can
use your PROHeat. If the tag is coded with
“X” or “S” (with a diagonal strike through),
or says “Dry Clean Only,” do not proceed.
Do not use on velvet or silk. If manufacturer’s
tag is missing or not coded, check with your
furniture dealer.
2. Check for colorfastness in an inconspicuous place.
3. If possible, check upholstery stuffing. Colored
stuffing may bleed through fabric when wet.
4. Plan activities to give upholstery time to
dry.
1.
3.
5.
2.
4.
Adsdfdd ghg bvh
cvbbj jkn hnbj jkvh
gcghhjj jhffhl kllgh
Manufacturer’s tag
Emptythe2-in-1watertank/cleanremovablenozzle
Lint Screen
www.bissell.com
13
Operations
ReadyTools™continued
5. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum with
a brush attachment and a crevice tool to
clean in fabric folds and tufts.
6. To begin cleaning with attachments,
follow the instructions on page 10 for
filling the 2-in-1 water tank.
7. Set the ReadyTools dial to the TOOLS setting.
This will allow spray and suction from the hose.
8. Attach the cleaning tool of your choice to
the end of the hose.
9. Clean by pressing the spray trigger to spray
solution onto the area to be cleaned. Slowly
move the tool back and forth over the soiled
surface. Release the spray trigger to suction dirty
water. Continue to clean in the area, working in
small sections, until dirt is removed.
Caution:DoNotOverwet.
10. When finished cleaning, remove and
rinse tool(s) in clean, running water.
11. It is recommended that you suction clean
water from the tap to rinse out the hose.
12. Before wrapping hose onto tool rack, lift
end of hose and stretch out to ensure all
water is cleared from hose.
13. Wrap flex hose around tool rack.
14. Empty 2-in-1 water tank and rinse out,
following instructions on page 12.
15. If the ReadyTools dial becomes difficult to
turn, the diverter assembly that holds the
dial may need to be cleaned. To clean, first
remove nozzle and locate screw that holds
the diverter assembly in place. With a Phillips
screwdriver, remove the screw and set aside.
16. Remove diverter assembly; hold under running
water making sure water flows through and
around the dial. Turn the dial about 10 times
clockwise and 10 more times counter
clockwise. This should free up any debris.
17. Wipe diverter assembly with a soft cloth and
replace back on machine. Replace nozzle.
18. Return ReadyTools dial to FLOOR
CLEANING setting.
7.
11.
15.
12.
16.
Run water through here
Screw
www.bissell.com
Operations
14
Hard Floor Cleaning
Yourdeepcleanermayhaveincluded
a hard floor tool and Hard Floor
Solutions.Thehardfloortoolprovides
effectivecleaningforlinoleum,vinyl,
and tile floors.
Caution: Do not use on unsealed
hardwoodfloors.
1. Thoroughly vacuum or sweep floor to pick
up any debris.
NOTE:Priortofillingwithformula
andwaterbesureallcarpetcleaning
formula is thoroughly rinsed from the
2-in-1watertank.
2. Fill BISSELL Hard Floor Solutions to the
indicated fill line in the built in measuring
cup and pour into mouth of bladder.
3. Fill the bladder with clean hand hot tap
water and set aside.
4. Attach the hard floor tool to the bottom of
the machine by hooking it into the nozzle
and swinging it down until it clicks into
place.
5. Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6. Plug into an outlet and turn the power on.
7. Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
8. While pressing the spray trigger, make
one slow forward wet pass and another
back.Caution:DoNotOverwet.
9. Repeat the motion without pressing the
spray trigger using the hard floor tool to
squeegee and suction up the dirty water.
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer
to the Maintenance and care section on
page 15 for machine clean up and
storage instructions.
4.
www.bissell.com
15
Maintenance and care
Machine care
Forbestresults,afewsimplestepscan
assureyourmachineiswellmaintained
after cleaning is complete.
1. Turn power switch off. Unplug the
machine and wrap the power cord.
2 . After emptying the 2-in-1 water tank, rinse
it with running hand hot tap water, tak-
ing care to clean underneath and around
the heavy duty bladder. Clean out red lint
screen. Removable nozzle may be rinsed if
necessary.
3. Replace the 2-in-1 water tank on the
machine.
4. Any loose hair or debris can be pulled
from the brush roll and thrown away.
5. To clean attachments, remove from hose and
rinse in clean, running water. Dry before
storing. Clean the hose by suctioning clean
water from the tap. Before wrapping back
on machine, lift end of hose and stretch out
to ensure all water is cleared from hose.
Refer to page 13, illustrations 11 and 12.
6. Wipe the machine’s exterior with a soft
cloth.
7. After carpet is dry, vacuum again to
remove hair and fuzz.
Machine storage
Puttheunitawayinaclosetor
basement for the next use. Store
cleanerinaprotected,dryarea.Since
thisproductuseswater,itmustnotbe
storedwherethereisadangerof
freezing.Freezingwilldamageinternal
componentsandvoidthewarranty.
www.bissell.com
Troubleshooting
16
Heat indicator light does not illuminate
Possible Causes Remedies
1. The heater switch is not turned on. 1. Turn on the heater switch located on side of unit.
2. The machine power switch is not turned on. 2. Both switches must be on to activate the heat
indicator light.
Reduced spray OR no spray
Possible cause Remedies
1. Bladder may be empty. 1. Turn power switch off; refill bladder with clean hand hot tap
water and formula.
2. 2-in-1 water tank may not be seated properly. 2. Turn power switch off; remove tank and reseat.
3. Pump may have lost prime. 3. Turn power switch off; after 1 minute turn on and depress
spray trigger.
4. The pump belt may be broken. 4. Turn power switch off and unplug from the outlet. To check
if a pump belt has broken, you will need a flat head
screwdriver. A. Insert the blade end into the slot of the
belt access door to release. Examine the belt for breakage.
You should be able to see the pump belt looped around
the motor shaft. If it is broken or missing, please refer to
Replacement Parts on page 18. A replacement belt may be
ordered by calling BISSELL Consumer Services Complete
installation instructions will accompany the replacement belt.
B. When replacing belt access door be sure to line up slots of
belt access door with slots in machine, slide door into place and
snap shut.
WARNING:
To reduce the risk of electric
shock, or injury, unplug from the
outlet before servcing
Slots
A.
B.
Pump Belt
www.bissell.com
17
Troubleshooting
DirtLifterPowerBrushdoesnotturn
Possible cause Remedies
1. The brush belt or pump belt is off or broken. 1. Refer to Remedy 4 on page 16 to check if brush belt or
pump belt is broken.
Cleanernotpickingupsolution
Possible cause Remedies
1. ReadyTools dial may be on the wrong setting 1. Set ReadyTools dial to either FLOOR CLEANING or TOOLS.
for the cleaning job.
2. Poor tool position. (Hand held attachments only). 2. Adjust angle; apply more downward pressure.
3. Removable nozzle may not be properly attached. 3. Make sure nozzle is on correctly by slightly raising front
of machine to line up slots on the base of the machine
with the hooks on nozzle. Attach at base first and
then click nozzle into place. Refer to image 5 on page 12.
4. 2-in-1 water tank lid is not properly installed. 4. Re-install lid; refer to the images on page 10.
5. 2-in-1 water tank is not properly seated. 5. 2-in-1 water tank must be firmly seated to function; remove
and reseat 2-in-1 water tank.
6. 2-in-1 water tank has picked up maximum dirty water. 6. Empty 2-in-1 water tank and refill, refer to the Operation
section.
7. The lint screen may be clogged. 7. Clean out lint screen. Refer to page 12.
Othermaintenanceorservicenotincludedinthemanualshouldbe
performedbyanauthorizedservicerepresentative.
ThankyouforselectingaBISSELLproduct.
Please do not return this product to the store.
www.bissell.com
Replacement parts
Accessories
18
Item Part No. Part Name
1 203-0104 Tank Assembly Complete
2 203-0102 Tank Base
3 203-0124 Removable Nozzle
4 215-0628 Replacement Pump Belt (with instructions)
5 015-0621 Replacement Brush Belt (with instructions)
6 203-0105 Lint Screen
Item Part No. Part Name
1 203-0149 Hard Floor Tool
2 203-6651 3" Tough Stain Tool
3 203-6653 4" Upholstery Tool
4 203-6654 6" Stair Tool
5 203-6652 Powered TurboBrush™ Hand Tool
6 203-0116 Spraying 2-in-1 Crevice Tool w/Brush
7 203-6655 Spraying Crevice Tool
8 210-3040 Mesh Tool Storage Bag
123456
1
6
2
7
3
8
4 5
Cleaning Formula: Refer to the bottom of page 5 of this guide for a full selection of
cleaning formula available for purchase.
www.bissell.com
19
Warranty
For Australian inquiries:
Monday – Friday 9 am - 5 pm
BISSELLAUSTRALIAPTYLIMITED
42 Rocco Drive
Scoresby 3179
Victoria
Australia
Telephone: 1-800-811-183
ForNewZealandinquiries:
Monday – Friday 9 am - 5 pm
ParexIndustriesLTD.
5 Tolich Place
Henderson 0610
Auckland
New Zealand
Telephone: 0800-247-735
This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If
you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL
Consumer Care by E-mail, telephone, regular mail as described below, or contact your local in country distributor.
LimitedTwoYearWarranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL will repair or replace (with new or
remanufactured components or products), at BISSELLs option, free of charge from the date of purchase by the original
purchaser, for two years any defective or malfunctioning part due to manufacturer defect.
This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply
to fans or routine maintenance components such as filters. Damage or malfunction caused by negligence, abuse,
neglect, unauthorized repair, or any other use not in accordance with the User's Guide is not covered.
BISSELL recommends that the original packaging be kept for the duration of the warranty period in case such need
arises within the warranty period that the item need re-packing and transportation.
*EXCEPTIONSANDEXCLUSIONSFROMTHETERMSOFTHELIMITEDWARRANTY
BISSELL AND ITS IN-COUNTRY DISTRIBUTORS ARE NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY
IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE TWO YEAR DURATION
FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
FORAUSTRALIANCONSUMERSONLY:OUR GOODS COME WITH GUARANTEES THAT CANNOT BE
EXCLUDED UNDER THE AUSTRALIAN CONSUMER LAW. YOU ARE ENTITLED TO A REPLACEMENT OR REFUND
FOR A MAJOR FAILURE AND FOR COMPENSATION FOR ANY OTHER REASONABLY FORESEEABLE LOSS OR
DAMAGE. YOU ARE ALSO ENTITLED TO HAVE THE GOODS REPAIRED OR REPLACED IF THE GOODS FAIL TO BE
OF ACCEPTABLE QUALITY AND THE FAILURE DOES NOT AMOUNT TO A MAJOR FAILURE.
THIS WARRANTY IS IN ADDITION TO OTHER RIGHTS OR REMEDIES UNDER LAW. NOTHING IN THIS
WARRANTY EXCLUDES, LIMITS OR MODIFIES ANY LIABILITY OF BISSELL WHICH IS IMPOSED BY LAW, OR LIMITS
OR MODIFIES ANY REMEDY AVAILABLE TO THE CONSUMER WHICH IS GRANTED BY LAW.
TO MAKE A CLAIM UNDER THIS WARRANTY CONTACT BISSELL AUSTRALIA PTY LTD (DETAILS ABOVE). CONTACT
BISSELL PRIOR TO RETURNING ANY GOODS. WHERE AGREED, BISSELL WILL REIMBURSE REASONABLE
POSTAGE / HANDLING COSTS (IF ANY) FOR RETURNING GOODS TO BISSELL.
©2012 BISSELL Homecare, Inc
All rights reserved. Printed in China
Part Number 120-4483
Rev 3/12
Visit our website at:
www.bissell.com
Scotchgard is a trademark of 3M
Microban® is a registered
trademark of Microban Products
Company
BISSELL consumer care
www.bissell.com
20
IfyourBISSELLproductshouldrequireservice:
Call BISSELL Consumer Care at the numbers below and we will give you the location of
a BISSELL Authorized Service Center in your area. If you have questions about your warranty
or need replacement parts please contact the numbers below.
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE:Pleasekeepyouroriginalsalesreceipt.
Itprovidesproofofpurchasedateintheevent
ofawarrantyclaim.SeeWarrantyonpage19
for details.
Do not throw the appliance away with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this you will help to preserve the environment.
For Australian inquiries:
Monday – Friday 9 am - 5 pm
BISSELLAUSTRALIAPTYLIMITED
42 Rocco Drive
Scoresby 3179
Victoria
Australia
Telephone: 1-800-811-183
ForNewZealandinquiries:
Monday – Friday 9 am - 5 pm
ParexIndustriesLTD.
5 Tolich Place
Henderson 0610
Auckland
New Zealand
Telephone: 0800-247-735

Navigation menu