Copy Of 9200brfv Boonton_9200B Boonton 9200B

Boonton_9200B Boonton_9200B

User Manual: Boonton_9200B

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadCopy Of 9200brfv Boonton_9200B Boonton 9200B
Open PDF In BrowserView PDF
RF/RMS VOLTMETERS
RF Voltmeter
Model 92006 (Gontinued)
Specifications
Voltage Range: 200 +V to 3 V in 8 ranges (3WV to 700 MHz wlth Oiwder)
IcdlcabOnSd c ~ h
to 50 pV

50 11 Measurements using Mdel952009 Terminated Voltage Sensor.

Voltage DFspIay: 1 mV to 300 V 1s.
dB Range: 80 dB In 8 ranges. 0.01 dB resolut10n.

Frequency Range: 10 kHz ta 1 2 GHz 100 kHz lo 2.5 GHz when the op!ional
MoCel 95200r Probe and M d e l 952009 Sensor are used and 10 Hz to 1W
MHz when the opl~onalModel 952076 Probe is used
Waveform Response: RMS lo 30 mV. calibrated m AM5 of a sinewave aboue
30 mV ( W A Sto 3 V and 700 MHz w~thD~v~der)

Wlth Dlvtder:

1 GHz-2GHz
5% rdg

Line Stability: Less than 0.2% rdg w~th* l o % Itne voltage change at rererence lane cond~hons
of I 15 to 120 V. 50 to 400 Hz, Usable after5 mlo warmup

Zero: Automatic, operated by panel key switch.
Dlsplay: 4 blg~tLED d~splayof voltage or dB. Auxiliary analog display, unalibratea. proporlionalto voltage (voltage mode) of dB (dB rndes).

Annunciators: LED$ indlcate V. mV, dBrnV, &V, dBm, dBW, and dBr x 100.
use of channel 1 (CHI ), channel 2 (CH2) or channel 3 (CH3) w~th
optlon -03where CH3 = C H I - CH2 in dB. Indtcah IEEE-488 bus actinty
Also shew

Crest Factor:

~ l t a cInput:
t

0.09 dB
0.26 dB
OAS dB

1M)kHz-1 GHz

dB Display: dBmV (0 dB equ~valentto 7 mVJ,dBV (0dB equ~valentto 1 V).
-3Bm (0 dB wulvalent to voltage drop generated when 1 mW rs ddssloaled In
;electable Zo reference. 50 to 603 I!s) Dr dBr (0dB equivalent to any desired
pe'e*encw level. Re'erence leva1 can be panel ~ l e c t e dto 0.01 dB resomution
provided available display range o: ~ 9 9 . 9 9
dB 1s not exceeded.)

C.F.
Lwei
C.F.

140
30mV
140

42
74
42
tWmV300mV t V
42
14
4.2

1.4
3V
1.4

(LSN, ATN,

REM and TLK} with option 41.

Power Consumption: 24 VA, 100, 120,220,240 V

Storage Ternper~tum:-55'

Input Impedance: c 1.5 pF.

I
10%.

50 - 403 Hz.

Operattng Tempwature: 0'to 55'C.
10

+ 75:C.

Maxlmum AC Input: 10 V. all frequencies and ranges

Environmmnlal Characteriatics: Conforms fa the requiremsnts of Mil-T2 W C C for type 111, Class 5. Slyle E equipment.

Maximum DC Input: 400 Y. all ranges:

Welght: 10 Ibs (4.50 kg1

Recorder Output: 10 Y Is proportional 10indlcafsd voltage (mV model over
each range. 8 V equrvalenl to 0 dBm regardless of Z, (dB mode) w~tha senslt~v~ty
of 1 V per 10 dB change wer the enttre range.

Accessorlea Included:
952001a 2 RF Probe
952002 50 I!BNC Adapter (F).

Bask Uncertainty:
mV

Voltage Level
3 mV - SMIO mV
Im v - B ~ V
0.2rn~
- Ir n ~

a 1 ownt
~ % r d a2 2 ~ w n ~
3% rdg r 3 counts
1% rdg

Frequency Effect:
50 I! measurements using the Model 952001 Probe wjth Mode1952002 BNC
Adapter.

Frequency
1 MHz (cal freq]

dBV,dHrnV, dBm
0.09dB

10kHz-t0(1MHz
100MHz-1GHz
1 GHz-1.2GHz

Dimensions: 8 3 in (21.1 cm)mde, 5.85 in 11 4.9 cm) high, end 13 75 in (34.9
cm) deep.

0.28 dB
0.63 dB

SWA:1.05to300MHz.1.10lo1 GHz,1.15fol.2GHr.
50 11 measurements using the Mdal952016 Probe with Mode1952002 BNC
Adapter.

952004 Probe Tip
952005 100 1 O~uider

Opttons:
-0l B IEEE-488 Bus Interface. Duplicates all lront panel functions ekcept llna
on off power SwrlCh. In addrtron, indlvdual power and dB ranges may be
selected and selectively zeroed Address and tcrmtnatlon chacactws sot by
rear panel brt swrtch. Compllss wfth tEEE-48B and rmplsmsnls: SH1,AH1, T6.

L4. SRI.R L l . DCl. and DTl.

0 3 Input Channel 2. Allows display 01 either Charnel 1 or Channel 2, or
Channel 3 whrch is CHt minus CU2 expressad In dB Includes second
Model 952001 RF Probe, with Model 952004 Probe Tip Modal 95200250n
BNC Adapter, and 952005 100:l Divldet

48 MATE, tnternd TMA (MATE) requites -01B.
-11 Low Frequency Version. TO Hz to 100 MHz.
-12 Dual Channel Low Frequency Version.
Accessaries Available:
050000 Rack Mtg Krt. Single
950001 Rack Mtg. Klt, Dual

50 Hz - 20 MHz
20Hr -50Hz

l%rdg

0.B dB
0.lOdB

50 ( 1 Measuremeits using Model 952016 Probe with 952058 100 1 Divider

1 MHz - 20 MHz
50 Hz 1 MHz
20 Hz 50 Hz

--

SWR: 1.05 to 100 MHz.

5% rdg

3.5% rdg
4.5% rdg

0.45 dB
0.31 dB
0.40dB

950002 Rack Mtg. Krt. Dual For dder '/2 Rack Inst.
950029 Transrt Case
952003 50 I1 Tee Adapter N IFF).
952005 100 1 Voltage Divider.
952006 75 fi BNC Adapter IF).
952007 75 I1 Tee Adspter N IF).
952008 lllnterm~natedBNC Adapter (F)
952009 50 f! Voltage Sensor.
952011-2 50 IE Accessory Klt.
952012-2 75 il Accessory Kit.
9520 1 3 Accessory Case.
95201 6-3 l o w Frequency Probe 10 Hz lo 700 MHz
9.52058 10o 1 Drv:dcr (10Hz to 20 MHz)
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Adobe Acrobat 7.0 Paper Capture Plug-in
Creator Tool                    : Adobe Acrobat 7.0
Modify Date                     : 2006:04:13 12:15:58-07:00
Create Date                     : 2006:04:13 12:10:34-07:00
Metadata Date                   : 2006:04:13 12:15:58-07:00
Format                          : application/pdf
Title                           : Copy of 9200brfv
Creator                         : Romero
Document ID                     : uuid:0280f44f-5893-4acf-9fff-9108aa345971
Instance ID                     : uuid:27a99a14-ce82-4be8-8c80-14f893902966
Page Count                      : 2
Author                          : Romero
EXIF Metadata provided by EXIF.tools

Navigation menu