CABA Win Data Sheet Brochure
User Manual: CABA-Win-Data-Sheet-Brochure
Open the PDF directly: View PDF 
.
Page Count: 4
CABA Win
Circuit Breaker Analysis Software
CABA Win
Circuit Breaker Analysis Software
▪▪Test Plan Editor for creation of your own test
plans
▪▪Detailed circuit breaker analysis by accurate
comparison with historical test results
▪▪Graphical display of a variety of measurements
and timing test results
▪▪Convenient report generation with MSWord,
Excel or List&Label
▪▪Compatibility with TM1800, TM1700-series,
TM1600/MA61 and EGIL units
DESCRIPTION
Effective circuit breaker maintenance requires well-organized, ac-
curate testing. The ability to accurately compare circuit breaker tests
with previous test results is essential. Therefore, it is required to con-
duct tests in exactly the same way and under the same conditions
as those conducted earlier. Comparison can then provide a clear
picture of any deviations and changes, thereby indicating whether
or not the circuit breaker should be kept in operation or taken out
of service for further investigation.
Comprehensive, accurate testing also requires analytical tools and
efficient reporting. It must be possible to validate test results in
detail and then easily compare them with other test results.
The CABA WinTM (Computer-aided Breaker Analysis) program has
earned a benchmark reputation in circuit breaker analysis. Test
results from earlier versions of CABA are upwards compatible to
CABA Win.
CABA Win can be used with Megger breaker analyzers TM1800,
TM1700-series, TM1600/MA61 and EGIL. CABA Win organizes all
the test tasks and ensures that measurements are conducted in the
same way for each object being tested. CABA Win saves the results
and generates the report. In the analysis section, you can work with
a number of graphic windows, compare different measurements by
overlaying one graph on another in the same display, and use cur-
sors and powerful zoom functions for detailed analysis. CABA Win
simplifies testing and ensures the quality of the test procedure.
guided through the test procedure in exactly the same way each
time the breaker is tested, regardless of who did the original testing.
Precise comparisons can be confidently made from one test to the
next. All of the test and circuit breaker data are saved in a data base
together with the breaker’s unique test plan. You can also enter the
results of manually conducted tests, and enter separate comments
for the breaker regarding the test in question. A breaker specific
test plan is automatically created, based on the specified test and
breaker data. The test plan also specifies the data that is to be pre-
sented graphically and how the results are to be reported.
TPE - Test Plan Editor
With this tool you easily create test plans for your circuit breakers.
The test plans will work together with the Circuit Breaker Analyzers
TM1800, TM1700 and TM1600.
APPLICATION
Test plans
CABA Win can be used for all breaker testing applications, ranging
from simple time measurement to dynamic resistance and vibra-
tion measurements. A circuit breaker is defined before it is tested
the first time. All of the entered data are kept together. You will be
CABA Win
Circuit Breaker Analysis Software
Fig. 1. Test and circuit breaker data are stored individually
Fig. 2. Linear and angular travel, voltage, current, pressure and vi-
bration tansducers can be defined and calibrated with CABA Win
Fig. 3. Multiple graphs and test results can be displayed simul-
taneously
Test data and breaker data
The test data and all the items of information about the circuit
breaker are stored individually as shown in Figure 1. CABA Win
uses Microsoft® Access® database. The data can be copied and/or
exported to other data media and formats e.g. Microsoft® Excel®.
Transducers and conversion tables
Linear and angular travel, voltage, current, pressure and vibration
transducers can be defined and calibrated with CABA Win. See
Figure 2. The calibration accuracy for a transducer is determined by
the user. The calibration program automatically indicates whether or
not the desired accuracy has been achieved, along with the actual
calibration data. CABA Win gives the user the flexibility of importing
or exporting a transducer to/from the transducer list. A conversion
table needed to recalculate data from angular movement to linear
movement can be linked to a given circuit breaker. This makes it
possible to measure contact travel of a circuit breaker in situations
where a transducer cannot be connected directly to the moving
contact.
Analyzing the test data
The test data is presented graphically and in tabular format. Multiple
graphs and test results can be displayed simultaneously, see Figure 3.
Zoom functions and cursors make it easy to conduct detailed analysis of
test data. Comparisons between different tests can be viewed conve-
niently by overlaying them in a single window. Colors, grids, scales and
the positioning of the test data are all controlled by the user.
Limits
For each parameter and operation, you can define pass and fail lim-
its for each circuit breaker. If you activate the function, CABA Win
automatically compares each measured value to the actual limits
and flags the values which are outside the limits.
Database
Database functionality for easy administration and backup of mea-
surements is available in CABA Win. The Microsoft Access-based
database lists all the circuit breakers with their specification and
pertaining tests.
Calculation parameters
Readings and calculated values are presented in tabular format. The
test plan determines which parameters are to be calculated and pre-
sented. You can delete and/or add calculated parameters, depend-
ing on the circuit breaker design, the way it is hooked up and the
operations being performed. More than 300 different calculation
parameters are defined in CABA Win.
Test plans
A number of standard test plans are delivered with CABA Win.
Contact your Megger representative for customer-specific test plans
and conversion tables.
Reporting
CABA Win contains a complete report generator which enables
the user to design unique report forms as desired. A number of
pre-defined standard reports can be used as supplied, or they can
be edited. The report form is saved together with the breaker data,
and can be used in future tests. Graphs and screen displays can be
copied to the clipboard and to a folder for additional processing in
other Windows® applications software.
Data communication
TM1800 Ethernet
TM1700-series Ethernet
TM1600/MA61 USB/Fiber-optic modem
EGIL USB
CABA Win
Circuit Breaker Analysis Software
Define the breaker and motion preferences.
Settings for breaker operations and measurement calculations.
Design your own test menu.
TPE – Test Plan Editor
The TPE is a wizard for easy
creating and editing all data
for a circuit breaker test. The
TPE shares the breaker list with
CABA Win.
CABA Win
Circuit Breaker Analysis Software
1
5
11
4
6
8
7
9
2
3
10
Postal address
Megger Sweden AB
Box 724
SE-182 17 Danderyd
SWEDEN
T. 08 510 195 00
E. seinfo@megger.com
CABA Win_DS_en_V04a
Printed matter:
Art.No. ZI-BL08E ▪ Doc. BL0241GE ▪ 2016
Subject to change without notice
Registered to ISO 9001 and 14001
The word ‘Megger’ is a registered trademark
ORDERING INFORMATION
Item Art. No.
CABA Win
For TM1800 and TM1700-series
Incl. Ethernet cross-over cable CG-8000X
For TM1600
Incl. fiberoptics and USB interface BL-8203X
For EGIL
Incl. USB cable BL-8206X
CABA Win upgrade
Upgrade to R04D CG-8010X
Upgrade to R05, including Test Plan Editor (TPE) CG-8040X
FEATURES
1. Test ID with information about the selected circuit breaker under
analysis and measurement
2. Design/change analysis window, test curves, colors, scales and
positioning
3. Compare with other tests
4. Cursors for detailed analysis
5. Display additional tests
6. Zoom
7. Motion traces
8. Coil current trace
9. Time measurements
10. Calculated parameters for the actual operation and pass/fail
evaluation
11. Cursor values
