Fail Safe FMS12 Fluorescent Confinement/Correctional Surface Spec Sheet 226 CNF 111777 SSS

User Manual: 226

Open the PDF directly: View PDF .
Page Count: 2

FAIL-SAFE®

FMS12

Biaxial

T5

T8

TT

Fluorescent

Confinement/Correctional

SURFACE

Catalog # Type

Date

Project

Comments

Prepared by

SPECIFICATION FEATURES

Fasteners

Stainless steel tamper-resistant

T20 TORX® screws with center

pin reject are standard. Allen-

head screws with center pin reject

optional.

Housing

Die-formed, 12-18 ga. CRS body

with continuous welded and

ground ends to form a one-piece,

seamless housing for maximum

impact resistance and prevention

of unauthorized fixture penetration.

Finish

High gloss, electrostatically

applied, white powder coat finish,

average minimum reflectance 92%.

Hinge

Continuous, stainless steel piano

hinge (1/4" diameter knuckle) with

welded pin end to prevent removal.

Door

One-piece, CRS door frame with

die-formed edges and tightly

closed corners increases rigidity.

Ballast Standard Class P, CBM/ETL

ballast.

Light Mask

Black fixture gasket prevents light

leaks.

Lens

Choice of prismatic acrylic,

prismatic polycarbonate or

prismatic tempered glass on fixture

side, clear polycarbonate or clear

tempered glass on environmental

side. See Lens Options.

Lamps

By others.

Lens Retention

Lens secured by thru-studs and

vertically adjustable internal CRS

hold-downs.

Ballast

Electronic Class P, CBM/ETL

ballast.

Labels

UL/cUL listed for damp locations.

Wet location under covered ceiling

optional.

ADC111777

2014-09-02 10:56:36

The Fail-Safe FMS combines maximum security construction features

with energy saving technology. This surface mounted luminaire utilizes

a one-piece housing, security lensing and tamper-resistant fasteners

to maximize impact resistance and prevent unauthorized fixture

penetration. Ceiling mount. UL/cUL listed for damp locations. The FMS

is ideal for confinement/security applications. Suitable for use in inmate

cells, psychiatric wards, secure corridors and general population areas.

DESCRIPTION

TORX® is a registered trademark

of Camcar Division of Textron Inc.

12" [305mm]

3-1/2"

[88.9mm]

1 X 2 / 1 X 4 CROSS-SECTION

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

Specifications and

dimensions subject to

change without notice.

Eaton’s Cooper Lighting Business

1121 Highway 74 South

Peachtree City, GA 30269

P: 770-486-4800

www.cooperlighting.com

FMS12

Inner Layer (Optional) 5

/

90=0.005 UV

Fixture Side

80=0.125 Prismatic Acrylic

81=0.156 Prismatic Polycarbonate

82=0.187 Prismatic Polycarbonate

93=0.156 Prismatic Tempered Glass

Environmental Side 5

84=0.125 Clear Polycarbonate

85=0.187 Clear Polycarbonate

86=0.250 Clear Polycarbonate

87=0.375 Clear Polycarbonate

94=0.187 Clear Tempered Glass

96=0.250 Clear Tempered Glass

97=0.375 Clear Tempered Glass

FMS

1' Nom. Length

2' Nom. Length 4' Nom. Length

S=12 ga. (Ultimax)

X=14 ga. (Maximum)

=16 ga. (Medium)

120=120V

277=277V

SAMPLENUMBER:

CompactFluorescent

113=(1) 13W Lamp

126=(1) 26W Lamp

213=(2) 13W Lamps

226=(2) 26W Lamps

313=(3) 13W Lamps

T8 Fluorescent

117=(1) 17W Lamp

217=(2) 17W Lamps

317=(3) 17W Lamps

Biaxial Fluorescnt

140BX=(1) 40W Lamp

240BX=(2) 40W Lamps

T8 Fluorescent

132=(1) 32W Lamp

232=(2) 32W Lamps

332=(3) 32W Lamps

EL4=EM Pack, T8, Biax

EL5 =EM Pack, T5, T5HO

FNL=Fluorescent NightLight 5, 7, 9W 6

(Lamp by others.)

GLR=Fuse

LNL=LED Night Light

and Holder

On/OffSwitches

SPS=Security Push Button 4

Stainless Steel Fixture

SSN=Natural Brushed Finish

SSP=Polyester Powder

Coat Finish

Fasteners

SF3=Allen-Head (center pin reject)

Options

9306=Allen-HeadWrench

VRSD

®

Electronic Ballasts

EB81= (1) Ballast for use with T8 Lamp

EB82= (2) Ballasts for use with T8 Lamp

EBT1= (1) Ballast for use with Compact Lamp

EBT2= (2) Ballasts for use with Compact Lamp

EBX1 = (1) Ballast for use with Biaxial Lamp

EBX2 = (2) Ballasts for use with Biaxial Lamp

Ballast

/

1

FMS-X12-332-UNV-82/86-EB82-SSN

UNV=120V -

277V

=T20 Center Pin Tamper-

proof TORX -Head

screwdriver

=Maximum Security

Surface Luminaire

D

12 = 12” Wide 98=0.500 Clear Tempered Glass

T5 Fluorescent

114=(1) 14W Lamp

214=(2) 14W Lamps

314=(3) 14W Lamps

124=(1) 24W Lamps

224=(2) 24W Lamps

T5 Fluorescent

128=(1) 28W Lamp

228=(2) 28W Lamps

328 =(3) 28W Lamps

154 =(1) 54W Lamps

254 =(2) 54W Lamps

EB51= (1) Ballast for use with T5 Lamp

EB52= (2) Ballasts for use with T5 Lamp

=18 ga. (Minimum)

N

12

3

Product

Family

Steel

Gauge

Fixture

Width Voltage 2

Lamp

Type

Accessories (Order separately)

FMS

Lens Type

FNL13 =Fluorescent NightLight 13W 6

(Lamp by others.)

347=347V

Absorbing Overlay

Notes:

2

1 For specific electronic ballast, specify brand and catalog number.

Products also available in non-US voltages and 50 Hz for international markets.

Consult your Cooper Lighting Representative for availability and ordering information.

3 Maximum (2) T5 or T5HO electronic ballasts.

4 120V only.

5 Refer to Lens Ordering Guide for additional lens choices.

99AR=0.750 Clear Tempered Glass

SPK=Speaker Housing Compartment

(extends housing)

WL=Wet Label (under covered ceiling)

RGT=Removable Gear Tray

6 Requires specific voltage.

ORDERING INFORMATION

25 3/16" [640mm]

8-3/4"

[222.25mm]

17-1/2" [444.5mm]

8"

[203mm]

12-3/16"

[310mm]

2-1/4" [57.15mm]

Access Hole 9/16" [0.56mm]

Mounting Hole

1 x 2

MOUNTING DIMENSIONS

49 3/16" [1250mm]

8"

[203.2mm] 12"

[305mm]

20" [508mm] 2.25" Dia.

[57.15mm]

Access Hole

9/16 x 1" [14.22mm x 25.4mm]

Mntg Holes

1 x 4

9/16" x 1"

Mounting

Holes

2-1/4"

Access

Hole

8"

[203mm]

12"

[305mm]

8" [203mm]

13-3/16" [335mm]

1 x 1

ADC111777

2014-09-02 10:56:36