CT 30 Manual
User Manual: CT-30-Manual
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Environmental conditions Using the tuner in these conditions may result in tuner malfunction: • Direct Sunlight • Extreme temperature or humidity • Extreme dust or dirt • Proximity to magnetic fields The DeltaLab CT-30 is a full-featured clip-on tuner in an advanced, portable design. The bright, clear display rotates for easy viewing while performing on stage or in the studio. PRECAUTIONS/SAFETY PRODUCT DESCRIPTION Battery Turn the power switch off when not in use to preserve battery life. Remove battery during extended periods of non-use to prevent battery leakage into the unit. Interference Operate this device at a suitable distance from televisions and radios to prevent interference. Handling Do not apply excessive force to buttons or switches on this device. Use of excessive force may cause the device to malfunction. Care Do not use cleaning chemicals or cleaning liquids on the surface of this device. Chemicals may cause damage to the finish or display screen. If cleaning is required, use a soft, dry cloth to wipe the surface. Foreign Matter Avoid using this device in close proximity to liquids. Liquids entering the device may cause malfunction, electrical shock or fire. Metal objects or particles can also cause malfunction, electrical shock or fire. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003 CET. BATTERY Each Deltalab tuner is shipped with a fresh battery. If the screen flashes, replace the standard CR2032 3V button-cell lithium battery. Rotate the battery cover counter-clockwise until the compartment opens. Press on the battery edge to pop the battery out. Replace the battery and rotate cover clockwise until it locks. Pay attention to polarity. 1. Remove Battery Cover 2. Replace Battery BATTERY MADE IN CHINA 3. Replace Battery Cover 4. Twist Cover to Lock MADE IN CHINA MADE IN CHINA BATTERY BATTERY One (1) Year Limited Warranty and Remedies Subject to the limitations below, DeltaLab® warrants to the original owner that the components of this product are free from defects in workmanship and materials, subject to normal use and service, for one (1) year from the date of purchase. DELTALAB® MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether this product is fit for a particular purpose and suitable for user’s application. If the product is defective within the warranty period, user’s exclusive remedy and manufacturer’s sole obligation will be, at its option, to replace the product or refund the purchase price. Except where prohibited by law, manufacturer and seller will not be liable for any loss or damage www.deltalabeffects.com Made in China 1108-9633 All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders. California Prop 65 Warning: This product may contain a chemical(s) known to the state of California to cause cancer or birth defects or other reproductive harm. If you experience any problems with your DeltaLab product, please contact our toll-free customer service team at 1-855-450-3685. Owner’s Manual arising from the product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. CT-30 Chromatic Clip-On Tuner WARRANTY FEATURES 1. Power/Play Button – Turns power on or off. Starts Metronome. 7 2. Metronome/Flat Button – Switches between Tuner and Metronome mode. Flats the Tuning note. 8 3. Display – Shows note, calibration adjustments and tuning meter. 4. Calibration Frequency Indicator – Displays current “A” note calibration. 5. Note Indicator – Displays current note being played. 6. Calibration/Tempo Button – Adjusts tuner calibration or Metronome tempo. 7. Tuning Guide Indicator – Provides visual tuning reference for sharp, flat, and “in tune.” 6 8. Tuning Meter – Shows precise indication of current pitch. 9. Tuner Clip – Attaches tuner to instrument and picks up vibrations from instrument (for tuning). 10. Battery Cover 1 9 2 3 4 5 BATTERY 10 TUNING IN METER MODE METRONOME MODE 1. C lip the CT-30 on to your instrument in a place where it will pickup the vibrations of the instrument such as the headstock of a guitar. The CT-30 has a built in visual metronome. The metronome provides a visual reference for keeping time. The LED meter will move back and forth with the time and the DeltaLab logo will flash with the time. MADE IN CHINA SPECIFICATIONS BATTERY 2. P ress the power button to turn the CT-30 on (pressing the power button again for 2 seconds will turn off the CT-30). 3. W hen the power is turned on, the reference pitch defaults to A = 440 Hz . If you wish to change the reference pitch (calibration), press the Calibration Button up or down to increase or decrease the reference pitch in 1 Hz steps over a range of 415Hz -- 466 Hz. Once the pitch reaches 466Hz, it will start over at 415Hz. 4. P lay a single note on your instrument. The name of the nearest note will be displayed. 5. A djust the tuning of your instrument so that the meter moves to the 0 position (center). The tuning meter will be to the left of center if your instrument is flat, or to the right of center if your instrument is sharp. 1 Indicator: LED Display 2 Tuning Range: A0 (27.5 Hz) - C8 (4186 Hz) Tuning Mode: Vibration Response Time: <20ms 1. Press the power button to turn the CT-30 on (pressing the power button again for 2 seconds will turn off the CT-30). Precision: +/- 1 cent Calibration: 415Hz - 466Hz 2. Press and hold the metronome button(M) for 2 seconds until the screen changes to the metronome screen. 3. Select the desired Beats Per Minute (BPM) using the Calibration Button up/down arrows. If you prefer to tap the tempo in, the metronome button also functions as a “tap tempo” button in metronome mode. Simply tap in the tempo that you want. 4. Press the power/play button for one second to start. Pressing the power/play button again will stop the metronome. 5. In order to switch back to tuner mode press the metronome button (M) for 2 seconds. MADE IN CHINA Power Supply: 3 Volt (CR2032 Lithium Battery) 4 3 1. Power/Play Button – Starts Metronome. 2. Meter Display – Moves back and forth with time. 3. BPM Display – Shows tempo in beats per minute. 4. DeltaLab Logo – Flashes on and off with tempo. Power Consumption: <16mA Dimensions: 2.44”(62mm) Wide x 1.3”(33mm) Deep x 1.5”(38mm) High Weight: .91 oz (26g)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12 Create Date : 2015:05:27 10:09:14-07:00 Metadata Date : 2015:05:27 10:09:17-07:00 Modify Date : 2015:05:27 10:09:17-07:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:78a3e31b-87d8-f64e-8d59-68e63a4b0ef9 Original Document ID : xmp.did:FE7F1174072068118A6DDE78C453ED67 Document ID : xmp.id:71d1e906-b6b6-4c99-9b4f-c0857c9773df Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:82414e40-605b-40df-9be7-e39fa4ebe51a Derived From Document ID : xmp.did:02803536-0546-4067-ab05-299c81f52822 Derived From Original Document ID: xmp.did:FE7F1174072068118A6DDE78C453ED67 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2015:05:27 10:09:14-07:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2014 (Macintosh)EXIF Metadata provided by EXIF.tools