3397120_LIT_Cannon Rod Holders_rD Angled Fixed Mount 1907000 Cannon Aluminum Base Downrigger Pedestal Owners Manual
Adjustable Rail Mount 1907020 33703OM
1907000 to the manual 462b229e-66e9-4734-9f6b-ae77740ae55b
User Manual: Angled Fixed Mount 1907000
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
ROD HOLDER & DOWNRIGGER TROLLING SYSTEM Rod Holders: ANGLED FIXED MOUNT 1907000 Adjustable Single Axis 1907001 Adjustable Rail Mount 1907020 Adjustable Clamp Mount 1907021 Adjustable Dual Axis 1907002 Adjustable Downrigger Mount 1907022 (METALLIC) Adjustable Downrigger Mount 1907023 (BlACK) CAUTION: READ THIS MANUAL CAREFULLY BEFORE OPERATING YOUR NEW CANNON ACCESSORY. RETAIN FOR FUTURE REFERENCE. NOTE: Do not return your CANNON accessory to your retailer. Your retailer is not authorized to repair or replace this unit. You may obtain service by: • calling CANNON at 1-800-227-6433; • returning your accessory to the Factory Service Center; 121 Power Drive, Mankato, MN 56001 Please include proof of purchase and purchase date for warranty service with any of the above options. Adjustable Dual Axis Rod Holder Shown Owner’s Manual Rod Holder Models & Features 1907000 Angled – Fixed Mount Rod Holder The Angled - Fixed Mount Rod Holder is 10 inches in length and has a fixed 60° angle. Adjustments can be made side to side by forty five degrees using the adjustable thumb screws in conjunction with an aluminum track. Clear anodized aluminum is used for strength and corrosion resistance and a UV resistant cap protects the finish of the rod and reel. The Angled Rod Holder is compatible with Cannon track systems. 1907001 Adjustable – Single Axis Rod Holder 1907020 Adjustable – Rail Mount Rod Holder 1907021 Adjustable – Clamp Mount Rod Holder The Adjustable – Single Axis Rod Holder is 10 inches in length and has 6 locking positions up and down. Pistol grip release provides quick one hand up and down angle adjustment while the ratcheting adjustment system allows you to pull the rod holder straight up for rod removal. Adjustments can be made side to side by forty five degrees using the adjustable thumb screws in conjunction with an aluminum track. Clear anodized aluminum is used for strength and corrosion resistance and a UV resistant cap protects the finish of the rod and reel. The Adjustable Rod Holder is compatible with Cannon, Bert’s, and Traxstech track systems. Also available pre assembled to 1 1/4 inch rail mount and Clamp Mount. 1907002 Adjustable – Dual Axis Rod Holder The Adjustable – Dual Axis Rod Holder is 10 inches in length and has 6 locking positions up and down with 360° rotation. Pistol grip release provides quick one hand up and down angle adjustment with 360° rotation with the push of the release button. Ratcheting adjustment system allows you to pull the rod holder straight up for rod removal. Clear anodized aluminum is used for strength and corrosion resistance and a UV resistant cap protects the finish of the rod and reel. This Adjustable Rod Holder is compatible with Cannon, Bert’s, and Traxstech track systems. 2 1907022 Adjustable – Downrigger Mount Rod Holder - Metallic 1907023 Adjustable – Downrigger Mount Rod Holder - Black The Adjustable – Dual Axis Rod Holder is also available on a Cannon downrigger mount in a metallic or black finish (metallic finish shown right). 1904015 Rail Mount 3/4” to 1-1/4” 1904016 Rail Mount 1-1/4” to 2” Cannon Rail Mounts allow for the mounting of Cannon Single and Dual Axis Rod Holders to round or square rail. Two sizes are available for round and square tube styles. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. 1904020 Clamp Mount Cannon Rail Mounts allow for the mounting of Cannon single and dual axis rod holders to any transom or allowable clamping edge. Clamp opens to two and a half inches and is made from clear anodized aluminum and stainless steel for strength and corrosion resistance. 1904000 Deck Mount The Cannon Deck Mount plate is a four inch by three inch clear anodized aluminum plate which allows the hard mounting of Cannon Dual Axis Rod Holders. The plate comes with a black protective mounting boot and all mounting hardware. 3 1904025 Aluminum Mounting Track 6” 1904026 Aluminum Mounting Track 12” 1904027 Aluminum Mounting Track 18” 1904028 Aluminum Mounting Track 24” 1904029 Aluminum Mounting Track 36” Cannon tracks allow for flexible mounting positions and easy removal of Cannon’s track system accessories. Locking grooves allow thumb screws to index with track and prevent accessories from twisting. The system is compatible with Cannon, Bert’s, and Traxtech track system products. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. All mounting hardware included. Available in 6, 12, 18, 24, and 36 inch lengths. 1904005 Pedestal Mount Track 12” 1904006 Pedestal Mount Track 18” The pedestal mounting track is three inches high and allows for mounting of Cannon’s track system accessories. Pedestal can be surface mounted or slid into mounting track for a variety of mounting positions and easy removal. The system is compatible with Cannon, Bert’s, and Traxtech track system products. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. Mounting hardware is included. Pedestal is available in twelve and eighteen inch track lengths for mounting up to three track system rod holders. 1904010 Gimbal Mount Track – Side Gunnel 1904011 Gimbal Mount Track – Stern Cannon’s Gimbal Mount Track allow for mounting of Cannon’s track system accessories in flush mount rod holders. Thirty degree angled gimbals have twelve inch tube length with an outer diameter of 1-1/2 inches. Eighteen inches of track allow for mounting up to three track system rod holders. The system is compatible with Cannon, Bert’s, and Traxtech track system products. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. 1904030 Fixed Base Downrigger Pedestal 4” 1904031 Fixed Base Downrigger Pedestal 6” Cannon’s fixed base downrigger pedestals CAUTION: The Cannon Pedestal can be surface mounted or track mounted for a variMount is intended for ety of mounting positions and easy removal. The use with a Track that is 3/4” thick aluminum top plate is pre-drilled and mounted directly to the tapped for mounting Cannon downriggers as well as deck of the boat ONLY. most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker downriggers. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. The fixed base downrigger pedestals are compatible with Cannon, Bert’s, and Traxstech track systems. Available in 4” and 6” heights. 4 1904032 Swivel Base Downrigger Pedestal 4” 1904033 Swivel Base Downrigger Pedestal 6” Cannon’s swivel base downrigger pedestals can be surface mounted or track mounted for a variety of mounting positions and easy removal. With 16 locking points, these downrigger pedestals allow for 360° downrigger rotation with locking points every 22.5°. The 3/4” thick aluminum top plate is pre-drilled and tapped for mounting Cannon downriggers as well as most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker downriggers. Bearing system ensures smooth swivel action even while a downrigger weight is attached. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. The swivel base downrigger pedestals are compatible with Cannon, Bert’s, and Traxstech track systems. Available in 4” and 6” heights. Rod Holder \ Accessory Compatibility Mounts Track Mount Gim bal Track Mount Pedestal Track Mount Rail Mount Clam p Mount Deck Mount Angled Fixed Mount ● ● ● ○ ○ ○ Adjustable Single Axis ● ● ● ●* ●* ○ Adjustable Dual Axis ● ● ● ●* ●* ● Rod Holder ● - Compatible ○ - Not Compatible * - Compatible with removal of track mount plate Pedestal Mount \ Accessory Compatibility Mounts Track Mount Gim bal Track Mount Pedestal Track Mount Rail Mount Clam p Mount Deck Mount 4" Fixed Mount ● ○ ○ ○ ○ ● 6" Fixed Mount ● ○ ○ ○ ○ ● 4" Sw ivel Mount ● ○ ○ ○ ○ ● 6" Sw ivel Mount ● ○ ○ ○ ○ ● Pedestal ● - Compatible ○ - Not Compatible Replacement Parts Part Part Number Description USED ON 3396562 END CAP 1904005, 1904006, 1904010, 1904018, 1904025, 1904026, 1904027, 1904028, 1904029 3390210 VINYL CAP 1907000 3393413 THUMB SCREW 1907000, 1907001, 1907002, 1904005, 1904006 3391515 CAP ROD HOLDER 1907001, 1907002, 1907020, 1907021, 1907022, 1907023 WEAR TIP 1907001, 1907002, 1907020, 1907021, 1907022, 1907023 33986110 5 CANNON® LIMITED WARRANTY Johnson Outdoors Inc. warrants to the original purchaser that the accompanying product (see exclusions below) is free from defects in material or workmanship for a period of one (1) year from the date of purchase. Within the warranty period, Johnson Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be returned, prepaid and with proof of the date of purchase to the following: ● Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankato, MN 56001 This limited warranty may be enforced only by the original purchaser; all subsequent purchasers acquire the product "as is" without any benefit of this limited warranty. Repair or replacement of the product as set forth in this limited warranty shall be the original purchaser’s sole and exclusive remedy and Johnson Outdoors Inc.’s sole and exclusive liability for breach of this warranty. EXCLUSIONS This warranty does not apply in the following circumstances: • When the product has been connected, installed, combined, altered, adjusted, serviced, repaired, or handled in a manner other than according to the instructions furnished with the product • When a serial number has been defaced, altered, or removed • When any defect, problem, loss, or damage has resulted from any accident, misuse, negligence, carelessness, or abnormal use, or from any failure to provide reasonable and necessary maintenance in accordance with the instructions of the owner's manual LIMITATION AND EXCLUSION OF IMPLIED WARRANTIES AND CERTAIN DAMAGES THERE ARE NO EXPRESS WARRANTIES OTHER THAN THESE LIMITED WARRANTIES. JOHNSON OUTDOORS INC. DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES, AND IN NO EVENT SHALL ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, EXTEND BEYOND ONE YEAR FROM THE DATE OF PURCHASE. THIS WRITING CONSTITUTES THE ENTIRE AGREEMENT OF THE PARTIES WITH RESPECT TO THE SUBJECT MATTER HEREOF; NO WAIVER OR AMENDMENT SHALL BE VALID UNLESS IN WRITING SIGNED BY JOHNSON OUTDOORS INC. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. Johnson Outdoors, Inc. / Cannon Division 121 Power Drive, Mankato, MN 56001 1-800-227-6433 © 2008 Johnson Outdoors, Inc. All rights reserved. To download product manuals or purchase Cannon products from an authorized dealer, please visit our web page at www.cannondownriggers.com WARNING: This product contains chemical(s) known to the state of California to cause cancer and/or reproductive toxicity. Product protected by United States Patent number des. D573685, D573686, D574920 Form No. 3397120 Rev D 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:12:10 10:15:50-06:00 Create Date : 2008:12:10 10:12:52-06:00 Metadata Date : 2008:12:10 10:15:50-06:00 Format : application/pdf Title : 3397120_LIT_Cannon Rod Holders_rD.pub Creator : Jluntsfo Document ID : uuid:7b8b00df-89dc-4086-89d9-f0a2e5052af8 Instance ID : uuid:be2eccc8-761b-4a68-a8cc-a453de794598 Has XFA : No Page Count : 6 Author : JluntsfoEXIF Metadata provided by EXIF.tools