Section12_CarburetorParts 8B Carburetor Parts 24cycle

User Manual: 8B

Open the PDF directly: View PDF .
Page Count: 14

Download
Open PDF In Browser	View PDF

CARBURETOR PARTS
UNIVERSAL
Part#

Banta
BRIGGS & STRATTON
Part#

O.E.M

623-590

525-154

221377
690766

Intake Gasket Material
High Performance
Intake Gasket Material.
Measures: 3” L x 3” W.

Diaphragm - Spring Cap
Fits our 530-014 and
530-006 diaphragms
and 520-106 diaphragm kit.
Use with our 525-162 - spring.

O.E.M

Application

BRIGGS & STRATTON
530-105

525-162

495770
272372

530-001

530-030

5021

270026

John Deere# M47845

5021B
5021D
270026

Diaphragm
Fits 82000 and
92000 series.

C

299637
496418

Diaphragm Assembly
For 3 Hp vertical engines.
Fits models 92500 thru 96500,
vacu jet models after serial# 6808011,
convoluted design - same as OEM.

530-063

270988
272638
272638S

270989
691871

Damping Diaphragm
Fits models 253700 thru 255400
and 400400 thru 422700.

520-106

(Sold in multiples of 10)

393397

Fuel Pump Repair Kit
Fits models
253700 thru 255400,
400400 thru 422700 & 460700.

Diaphragm Kit
For 3 thru 5 Hp
horizontal shaft engines.
Includes: diaphragm, spring and cap.

530-014

299636 / 391643
391681 / 496416

Fuel Pump Diaphragm
(Sold in multiples of 10)
Fits selected 8 & 11 Hp horizontal.
14, 16 & 18 Hp L-Head twin engines.
Models 402700, 42A700 thru 42E700, 414700, 400700,
402400 & 460700. (Used in our 520-080 and 520-106 kits)

Diaphragm
For 3 thru 5 Hp horizontal and
vertical pulsa-jet carburetors.
(Sold in multiples of 10)
Fits models 60200 thru 80200,
91200, 100200 and 132000 thru 132900.

530-037

530-048

530-055

Diaphragm Kit
For 5 Hp horizontal shaft
engines. Includes:
diaphragm, spring and cap.

530-006

(Sold in multiples of 10)

Diaphragm Assembly
For 3-1/2 & 4 Hp vertical engines.
Fits models 92900 thru 94900,
110900 and 112900 thru 114900,
Pulsa jet models, convoluted design - same as OEM

272538
272538S
272637
4157 / 4168

Diaphragm
(Sold in multiples of 10)
For 3 thru 5 Hp horizontal
Pulsa-Jet engines (new style).
Models: 90200 thru 90299, 91200 thru 91299 and
92220; also fits 5 Hp horizontal engine models: 133200
thru 133299 & 135200 thru 135299 and 136200.

530-034

(Sold in multiples of 10)

260455
692206

Diaphragm - Spring
Fits our 530-006, 530-014
and 530-030 diaphragms
Use with our 525-154 - spring cap.

Diaphragm Kit
For 3-1/2 and 3.75 Hp
Classic and Sprint engines.
Fits models 95900, 96900,
98900, 9C900 & 10A900 (Replaces our 485-174)

Application

616-454

270253

(Sold in multiples of 10)

491922

Fuel Pump Repair Kit
Found on newer Briggs
and Kawasaki engines using
Mikuni fuel pumps.
Fits MIKUNI dual outlet fuel pump.

12-01

C

Banta

CARBURETOR PARTS

BRIGGS & STRATTON
Part#

O.E.M

520-124

693502

BRIGGS & STRATTON

Application

Part#

O.E.M

525-209

221995

Application

overhaul kit see our carburetor
kit# 520-249. B&S# 693503 (section 10)

Carburetor Float Bowl
For 14, 17 and 19 CID vertical
shaft engines with one-piece
flo-jet carburetors. Fits models 146700
and 170700. Also fits on many Kohler carburetors, for
example Walbro carbs found on K341 series engines.
Measures: 2.321” OD X 1.280” HT, Hole: 3/8” ID

525-200

525-219

Fuel Pump Repair Kit
Fits 40 and 42 CID twin
cylinder engines with four screw
mounting. For a complete

99333

Carburetor Float
For 6, 7 & 8 Hp engines with
round cartridge filter and
main jet on side of bowl.
Size: 2-1/8″ OD X 1-5/16″ ID X 13/16″ HT

525-208

Carburetor Float
Bowl Assembly
Fits Walbro carburetors on
19 and 28 CID engines.
Fits B&S model 286707 12.5 IC engines
Measures: 1.950″ OD X 1-5/16″ HT, Hole: 5/16″ ID

298514
692265

525-235

Carburetor Float
For 7 Hp engines with oblong
filter and manual choke 400
series 17 - 18 Hp twin cylinder.
Size: 2-3/8″ OD X 1-9/16″ ID X 13/16″ HT

525-899

299707

525-222

Walbro# 75-570

525-558

485-184

525-840
(While Quantities Lasts)

230896
231435 / 691824
Lawnboy# 300096
Tecumseh# 27106
Toro# 92-6389

(Sold in multiples of 10)

Carburetor Float Pin
Found on Briggs, Lawn Boy, Tecumseh and Toro
equipment. Fits models CA-630883 thru CA-632329A
carburetors. Measures: 3/32” OD X 15/16” Long

525-554

231371
691242 / 797622
Walbro# 78-47

(Sold in multiples of 10)

Carburetor Float Pin
For Briggs & Stratton and Lawn Boy engines with Walbro
carburetors. Fits Walbro carburetor models LMJ, LMK &
LMR series carburetors. Measures: .079″ OD X .800″ Long

C

495933

Kawasaki# 160207003

281165S

Carburetor Bowl Gasket
For Briggs and Stratton.
Fits larger carburetor bowls.

494381

Carburetor Float
Fits 17 and 19 CID
horizontal shaft engines.
Fits 12.5 IC model 286707

Walbro# 20-141
Walbro# 20-141-1

Carburetor Float Bowl only
Fits Walbro LMK carburetors on
19 and 28 CID engines.
Measures: 1.950″ OD X 1-5/16″ HT, Hole: 5/16″ ID.
(Also see our 525-219).

398187

Carburetor Float
For Briggs & Stratton and
Lawn Boy engines with Walbro
carburetors. Fits Walbro carburetor
models LMJ, LMK & LMR series carburetors.
Size: 1-17/32″ OD X 21/32″ ID X 21/32″ HT

525-217

493640

Carburetor Float Bowl
Fits B&S 93300 series
engines; also replaces Walbro
20-141 & 20-141-1. Fits Walbro ″LME″ carburetors.
Fits Briggs & Stratton and Lawnboy.
Measures: 1.850″ OD X 1″ HT, Hole: 3/8″ ID

Carburetor Float
For 6 thru 12 Hp engines.
Fits 14, 17 and 19 CID vertical shaft
engines with one piece Flo-jet carburetors.
Size: 1-31/32” OD X 63/64” ID X 9/16” HT

614-404

495933

(Sold in multiples of 10)

398188

Needle & Seat
For Max and Quantum engines
using Walbro LMS1, 3 and 10 series carburetors.
Fits models 83400, 90700, 91700, 99700, 100700,
110700, 111700, 114700 and 121700 thru 126800.

525-018

494788

Needle & Seat
Fits Walbro carburetors.

525-944

231855
231855S

Needle Valve
For Walbro carburetors.
Fits models 286402, 286707, 289707, 28B702, 28B707,
28M707, 28N707, 28N777 and 28P777. For 10, 10.5, 11.5,
12.5, 13, 14 & 15 Hp (28 CID) vertical shaft engines.

12-02

C

CARBURETOR PARTS
BRIGGS & STRATTON
Part#

O.E.M

525-945

715155

BRIGGS & STRATTON

Application

715075

231019
394683

293478

260875

490-045

260703

Governor Spring
(3300 RPM)
Fits 100900 and 120900.
Coil Length: 19/32″ X 4″ Overall

(Sold in multiples of 10)

260711

490-086

490-102

490-185

490-250

Grommet
Breather Tube for Briggs and Stratton.
Found on some 80200, 92200, 93400, 130200, 135200,
10A902, 12OT00 series engines as well as many others.

(Sold in multiples of 10)

692207
260584

Governor Spring
Fits 280700 and 281700
Coil Length: 3/4″ X 6-1/2″ Overall

12-03

(Sold in multiples of 10)

260029

Governor Spring
Fits 110700.
Coil Length: 7/8″ X 2-9/16″ Overall

67838
692189

(Sold in multiples of 10)

691798
261306

Governor Spring
Fits 190700, 191700 and 192700
Coil Length: 5/8″ X 1-1/8″ Overall

293962
297102

(Sold in multiples of 10)

260695

Governor Spring
Fits 100200 and 130200
Coil Length: 1/2″ X 1-3/16″ Overall

299096
394681

(Sold in multiples of 10)

692205
260041

Governor Spring
Fits 60100, 61100, 80100 and 81100
Coil Length: 9/16″ X 2-1/16″ Overall

Float Valve and Seat
For models 140000, 170000,
190000 and higher. Viton-tipped style

C

(Sold in multiples of 10)

(Sold in multiples of 10)

490-078

Float Valve and Seat
For most 7 thru
18 Hp engines. Fits models
170400 thru 422700, 190400 & 254400.
Includes viton and steel tipped needles

102-007

260878

Governor Spring
Fits 100900 and 130900
Coil Length: 3/8″ X 3-7/8″ Overall

Float Valve and Seat
For 3 and 5 Hp horizontal
engines. (Updraft carburetors)
Fits models 80700,
130400, 132400 and 817900.

525-006

(While Quantities Last)
(Sold in multiples of 10)

Governor Spring
(3400 - 3600 RPM), Fits 92500, 92900 and 110000,
Coil Length: 2-1/16″ X 2-5/8″ Overall

490-052

Float Valve and Seat
Fits large 2 piece flo-jet
carburetors. Fits 7 thru 12 HP
Briggs Vertical Engines.
Float Style Carburetor. (Replaces old B&S# 231019).
INLET NEEDLE measures: .610” overall length.
(Note: For shorter inlet needle - see our 525-901).

525-063

261027

490-003

394682

(Note: For longer inlet needle - see our 525-903).

525-014

527-507

Application

Governor Link
Fits most 3, 3-1/2,
4 and 5 Hp engines.
Measures: 1-3/4″ overall length

Float Valve and Seat
For 7 thru 18 Hp engines.
Fits models 170400 thru
195400, 200400 thru 256700,
280700, 281700, 326430,
42A707, 42A777, 42A777, 42D707, 42E707, 42E777 &
460777, if equipped with push in brass seat.
INLET NEEDLE measures: .595” overall length.

525-903

O.E.M

525-071

Float Valve / Needle Valve.
Fits 115400 series engines.
Overall Length: .444” approximately.

525-901

Part#

Governor Link
Fits model (link),
Measures: 1-11/16″ overall length.

Float Valve / Needle Valve.
Fits 185400 series engines.
For 9HP (18CID) Vanguard OHV horizontal engines.
Overall Length: .625” approximately.

525-946

Banta

(Sold in multiples of 10)

C

Banta

CARBURETOR PARTS

BRIGGS & STRATTON
Part#

O.E.M

490-7733

690480
260871

Governor Spring
Fits 194700 - 194799
(8 Hp models)
Coil Length: 1/2″ X 1-5/32″ Overall

490-7737

(Sold in multiples of 10)

(Sold in multiples of 10)

490-7741

490-7736

490-7742

C

(Sold in multiples of 10)

260591

Governor Spring
(3400 - 3600)
Fits 60900 thru 60907
and 61900 thru 61907
Coil Length: 2-3/16″ X 2-5/8″ Overall

(Sold in multiples of 10)

691599
26925

Governor Spring
(Sold in multiples of 10)
Fits 6B, 8B, 8BH-A
(w/carb #294348 only)
60300, 60700 (on type #907133) 80300
Coil Length: 3/4″ X 2-3/8″ Overall

260599

490-175

260596

Governor Spring
(4000 - 4200 RPM)
Fits 60900 and 80900
(with choke-o-matic)
Coil Length: 13/16″ X 1-1/4″ Overall

490-177

(Sold in multiples of 10)

26763

Governor Spring
Coil Length: 2-3/8″ X
1-15/16″ Overall

490-105
(Sold in multiples of 10)

691832
262505
262604

(Sold in multiples of 10)

261105

Governor Spring
Fits 146000, 170000,
190000, 220000 & 251000.
Coil Length: 2-1/4″ X 2-3/4″ Overall

490-800

(Sold in multiples of 10)

281024
691912

(Sold in multiples of 10)

Governor Blade
For Briggs and Stratton.
Fits Briggs 3.5 Hp engines.
Found on models: 95902, 98902 and 10A902 etc.

805460

Governor Spring
Fits 303700 - 303799 and
350700 - 350799
(16 Hp Vanguard & 18 Hp)
Coil Length: 7/16″ X 1-15/16″ Overall

Governor Spring
Fits 6BH-S
(Sold in multiples of 10)
(on type #900060 & up)
6050060500, 80500 (with manual choke)
Coil Length: 3/4″ X 1-3/4″ Overall

Governor Spring
(Sold in multiples of 10)
(4000 - 4200 RPM)
Fits 60500 and 80500, with choke-o-matic
Coil Length: 7/8” X 1-9/16” Overall

691278
262784

Governor Spring
Fits 260700 - 260799 and
261700 - 261799 (14 Hp Vanguard)
Coil Length: 11/16″ X 1-7/8″ Overall

260025

490-173

262572

Governor Spring
Fits 286700 - 286799
(12-1/2 Hp IC models)
Coil Length: 1/2″ X 1-1/8″ Overall

490-180

Application

(Sold in multiples of 10)

262759
692211

Governor Spring
Fits 104700 - 104799
(5 Hp Vanguard)
Coil Length: 1/2″ X 1-5/8″ Overall

O.E.M

490-060

Governor Spring
(Sold in multiples of 10)
Fits 96900 - 96999
(3.5 Hp Sprint & Classic).
Coil Length: 1-3/16″ X 2-29/32″ Overall.

490-7735

Part#

490-179

691276
262678

Governor Spring
Fits 99700 - 99799
(5 Hp Europa models)
Coil Length: 3/4″ X 2-3/16″ Overall

490-7740

(Sold in multiples of 10)

691833
262664

Governor Spring
Fits 126700 - 126799
(5 Hp IC Quantum models).
Coil Length: 3/4″ X 2-3/16″ Overall

490-7739

Application

262656

Governor Spring
Fits 124700 - 124799
(5 Hp Quantum)
Coil Length: 7/8″ X 2-3/16″ Overall

490-7738

BRIGGS & STRATTON

525-188
(Sold in multiples of 10)

292681

Idle Screw
For 7 thru 18 Hp horizontal engines.
Fits models 170400 thru 422700

12-04

C

CARBURETOR PARTS
BRIGGS & STRATTON
Part#

O.E.M

525-170

299740

BRIGGS & STRATTON

Application

Main Nozzle
Fits models 146700,
147700, 170700, 171700,190000,
191000, 220000, 251700, 252700 & 300420.
Measures: 2.534″ long - 4 holes

525-253

O.E.M

525-089

391233
396795

525-030

398039
395207

691966
394730
(While Quantities Last)

Main Nozzle
Fits models 220400, 252400, 301400 & 302400.
For 16 Hp cast-iron engines (new style)
Measures: 2-3/4″ Long - 3 holes

525-672

Part#

525-022

520-098

390950

120-206

230005

C

208959A
496115
694395

Primer Bulb
Fits Quantum series 5, 5-1/2 and 6 Hp
models. Includes: Retainer (with hole)

491006

Throttle Shaft
For 8, 10, 11 and
12 Hp vertical engines.

Needle Valve
For 2 and 3 Hp horizontal, 3.5 and 4 Hp vertical,
5 Hp horizontal & vertical. Fits models: 60100, 60200,
60500, 60900, 80100, 80200, 80500, 80900, 82000,
92000, 94900, 100000, 110000 & 130000 series

Needle Valve Seat
Fits 3 Hp horizontal, 80200 - 80299,
3-1/2 Hp vertical 92900 - 92900,
4 Hp horizontal 110200 -110299 and
5 Hp horizontal 130200 - 130299.

120-208

525-054

23433

230591
692134

208958A
4128 / 4178
494408 / 694394

Primer Bulb
Fits Quantum series 3-1/2, 3.75 and 4 Hp
models. Includes: Retainer (without hole).

93357 / 94913
94616 / 690953

Needle Valve
For 2 Hp and 3 Hp horizontal engines. Fits models
60300, 60400, 60700, 80300, 81300, 81400 series.

525-794

395508

Needle and Seat Kit
For 3 and 4 Hp vertical
engines. Fits models
62030, 93500, 94500, 95500,
113900, 114900, 130200, 130900 & 131200.

Carburetor Mounting Screw
(Sold in multiples of 10)
Fits models 196400,
19E400 thru 19G400, 28A700 thru 28D700,
28M700, 176430 and 92232. Double slotted screw
Size: 1/4″-20 THD X 3/4″ Long

525-055

299059

Needle and Seat Kit
For 2 and 3 Hp horizontal
vacu-jet models. Fits 60100,
60500, 80100, 80500 and 80600 series.

(While Quantities Last)

525-048

299060

Needle and Seat Kit
For 3 thru 5 Hp pulsa-jet
models. Fits models 60200,
60900, 80000, 82000, 92000,
94900, 100000, 110000 and 130000.

Main Nozzle
For 16 Hp cast-iron engines (old style)

525-139

Application

Needle and Seat Kit
Fits 7 thru 12 Hp vertical engines.

Main Nozzle
Fits models 142300 thru 143457,
144200 thru 145254, 146400 thru 147700, 190400,
191400,193401 thru 200466, 233401. For 8 Hp horizontal
engines. Measures: 2-7/8″ Long - 3 holes

525-667

Banta

525-451

221747

Welch Plug
Fits models 220400,
221400, 243400,
252400, 301430 & 325430.
Measures: 1-3/4″ diameter

525-675

221997

Welch Plug
Fits models 14600, 170000,
190000, 220000 and 251000.
Measures: 1-1/2″ diameter

12-05

(Sold in multiples of 10)

(Sold in multiples of 10)

C

Banta

CARBURETOR PARTS

HOMELITE
Part#

O.E.M

615-028

UP-04802
UP-01201

HONDA
Application

Primer Bulb
Fits BP250, HB180, HBC18, 30 &
32 blowers, GST18, GSTBC, ST145, 155,
175, 185, 275, 285, 485 and SX135 trimmers.
Measures: 7/8” flange OD X 5/8” HT.
(Fits our 615-514 Primer Assembly).

16155-883-005
code# 0636282

16011-ZEO-005
Code# 1441476

525-994

16011-ZAO-931
Code# 2059236

525-998

525-995

C

16015-ZE0-831
16015-ZE1-811

Carburetor Float Bowl
Fits models GX110, GX120,
GX140, GX160 & GX200 series engines.
Measures: 1.830″ OD X 1.380″ HT
Includes: O-ring and Nut

525-999

16211-ZE2-W00

Honda

Bowl Nut and Bowl Gasket
For our 525-995. Fits models
GX110, GX120, GX140, GX160 and
GX200 series engines.

525-996

16015-ZE8-005
16015-ZE2-005
code# 2157493
code# 2089993

16013-ZA0-931

Carburetor Float
Fits models GX240,
GX270, GX340 and GX390
series engines; also fits liquid cooled 13 Hp.

Honda

code# 2455608

16211-ZE2-000

Code# 2059244

16015-ZE0-811

Bowl Nut and Bowl Gasket
For our 525-994.
Fits models G100 & G200 series engines.

16211-ZE1-000

Carburetor Insulator
For Honda GX340
and GX390 series engines.
Size: 2-7/8″ L X 2-3/4″ W X 19/32″ Thick approximately.

525-476

16010-ZE2-812

Carburetor Float Bowl
Fits models G100 and G200
series engines.
Measures: 1.678″ OD X 1.275″ HT
Includes: O-ring and Nut

Carburetor Insulator
For Honda GX240
and GX270 series engines.
Size: 2-7/8″ L X 2-3/4″ W X 1/4″ Thick approximately.

486-236

16010-ZE1-812

Carburetor Bowl Gasket
For GX240, GX270, GX340,
GX390, GXV270, GXV340 and GXV390.
(Use with our 525-996 carburetor bowl assembly).

Carburetor Insulator
For Honda GX140
and GX160 series engines.
Size: 3-5/8″ L X 2-5/8″ W X 1/4″ Thick approximately

486-234

16013-ZE0-005
16013-ZE0-065

485-215

Needle and Spring
Fits models GX240, GX270,
GX340 and GX390 series engines.
Overall Length: 13/16” (Tip to tail)

486-233

525-474

Application

Carburetor Bowl Gasket
For GX110, GX120, GX140, GX160,
GX200 and GXV120, GXV140, GXV160.
(Use with our 525-995 carburetor bowl assembly).

Needle and Spring
Fits models GX110, GX120,
GX140 and GX160 series engines.
Overall Length: 11/16” (Tip to tail)

525-343

O.E.M

485-216

Needle Valve
Fits models G10, G150, G200,
G300, GV150 and GV200 series engines.

525-342

Part#

Carburetor Float
Fits models GX110, GX120,
GX140, GX160 and G110 & G120 series engines

HONDA
525-341

continued

Carburetor Float Bowl
Fits models GX240, GX270,
GX340, GX390 & GVX270 & GVX340 series engines.
Measures: 2-3/16″ OD X 1-3/8″ HT.
Includes: O-ring and Nut

12-06

C

CARBURETOR PARTS
HONDA

KOHLER

continued

Part#

O.E.M

525-993

16015-892-505

Application

Carburetor Float Bowl & Gasket
Fits models:
GCV135 thru 160 series engines.
Measures: 2″ OD X 1-5/16″ HT

285-856

16562-ZE1-020

16562-ZM0-000

525-600

16610-ZE1-000

16561-ZE1-810

525-209

16561-ZM0-000

485-892

25 104 01
25 104 01S

B&S# 221995

25-041-04
25-041-04S

Bowl Gasket
Fits Walbro made carburetors
found on Gravely and many others.
Replaces Walbro# 92-301 and Gravely# 044058.
Measures: 2-7/16″ diameter. On all K & M series Kohler
engines w/Walbro carburetors.

16561-ZE3-000
16561-ZE3-710

KOHLER

LAWN BOY

25 757 03 / S
200408

525-303

Carburetor Float
Fits models: K161, K181,
K241, K341 and KT twin series.
For 7 and 8 Hp engines. Fits all brass float carburetors.
Measures: 1” ID X 1-15/16” OD X 19/32” HT.

C

25 757 01
200443
231555

Carburetor Float Bowl
Fits on many Kohler carburetors,
for example Walbro carbs found
on K341 series engines.
Measures: 2.321″ OD X 1.280″ HT, Hole: 3/8″ ID

Governor Spring
Fits models: GX240,
GX270, GX340 and GX390.

525-239

12 757 02
12 757 02S

Carburetor Bowl
Fits Walbro carburetors.
Size: 3/8″ ID (Hole) X 2-5/8″ OD X 1-1/4″ HT

Governor Spring
For Honda.
Fits models: GCV135 / 160.

490-11839

25 757 09
25 757 09S

Application

Float Valve Kit
Fits models K91 thru K341.

Governor Spring
Fits models GX110,
GX120, GX140 and
GX160 series engines.

490-11838

525-237

525-485

16562-ZE2-000

Choke Lever
Fits models GX110, GX120,
GX140, GX160 and GX240,
GX270, GX340 and GX390 series engines.

490-10857

O.E.M

Carburetor Float
For Briggs & Stratton and
Lawn Boy engines with
Walbro carburetors. Fits Walbro carburetor
models LMJ, LMK & LMR series carburetors.
Measures: 1-17/32” OD X 21/32” ID X 21/32” HT

Throttle Return Spring
Fits models GX240,
GX270, GX340 and
GX390 series engines.

525-363

Part#

614-404

Throttle Return Spring
Fits models GVX135
and GVX160 series engines.

285-859

continued

Carburetor Float
Fits Kohler models: M10 thru M20;
MV18 and MV20. (Nylon float).
Replaces Walbro# 75-566 / 75-566-1.
Measures: 3/4″ ID X 1-3/4″ OD X 3/4″ HT.

Throttle Return Spring
Fits models GX110,
GX120, GX140 and
GX160 series engines.

285-850

Banta

396521
678882
681741
929697

Toro# 92-9697

Float Valve
Fits models D-600 and F series engines
with Lawn Boy manufactured carburetors.

12-07

C

Banta

CARBURETOR PARTS

LAWN BOY
Part#

O.E.M

525-305

678736

Needle and Seat
For old style Lawn Boy engines.

527-879

(While Quantities Last)

(While Quantities Last)

(Sold in multiples of 5)

66-7460

9771-021-2580

Clamping Collar
For our 606-414 elbow.
Fit chain saw model: 038 series.

0000-350-6202

Primer Bulb Assembly.
MOUNTING HOLE: .758”.
Found on Stihl concrete / cut off saw models: TS700 and
TS800. Fits Stihl Blower models: BR500, BR550 and
BR600 plus many other makes / models.

142-0553
0142-0553

STIHL
1119-141-2200

Intake Manifold - Rubber
Fit Stihl 038 series chain saw.

1125-141-2200

Intake Manifold - Rubber.
Fits Stihl chain saw models:
034, 036 and MS360

0000-350-6202
1130-350-6200

Primer Bulb Assembly
MOUNTING HOLE: .576”.
Found on Stihl concrete / cut off saw models:
TS400 and TS800. Fits Stihl Blower model:
BR500 plus many other makes / models.

(Sold in multiples of 10)

(Uses our 615-028 replacement primer bulb). Note: This primer
assembly has a coil spring inside the primer bulb.
(NOTE: To fit larger mounting hole see our 615-511 primer).

623-143

Float Valve Kit
Fits models B43 and B48.

C

Intake Manifold - Rubber.
Fit Stihl chain saw models:
066 and MS660.

615-514

602850

ONAN

606-412

1122-141-2201

(Uses our 615-028 replacement primer bulb). Note: This primer
assembly has a coil spring inside the primer bulb.
(NOTE: To fit smaller mounting hole see our 615-514 primer).

Toro# 66-7460

(Plastic type)

606-414

606-418

Application

607310

Carburetor Bowl Gasket
Fit C, D-600 & F series carburetors
manufactured by Lawn Boy.

525-079

O.E.M

615-511

Primer Bulb
Fits Silver series models with
Walbro carburetors.
Found on both Lawn Boy & Toro models.

486-076

continued

Part#

606-776

Wabro# 102-3004

Primer Bulb
Used on 1974 and newer models,
mounted on engine shroud.

120-440

Application

683779

Idle Valve Assembly
Found on Lawn Boys euipped
with Walbro carburetors.

120-204

STIHL

continued

4114-149-1205

Carburetors mount gasket.
Used on many Walbro and
Zama carburetors.
Found on many Stihl models.

606-775

1118-182-0900

Control Shaft
Fit Stihl 028 series chain saws.

FOR MORE STIHL PARTS SEE OUR
SECTIONS 16 & 50

TECUMSEH
525-591

631700

Carburetor Bowl
For float style carburetors without
bowl drain. (aluminum material)
Size: 13/32″ ID X 2.193″ OD X 1.155″ HT

12-08

C

CARBURETOR PARTS
TECUMSEH
Part#

O.E.M

525-526

631867

TECUMSEH

continued
Application

Carburetor Bowl
For float style carburetors without
bowl drain. (aluminum material)
Size: 11/32″ ID X 2.193″ OD X 1.155″ HT

27136A

632019

John Deere#
AM30958

Carburetor Float
Fits most float carburetors.
Use with our 525-526 and 525-591
carburetor bowls and our 525-220 bowl drain assembly.
Size: 1-3/4″ OD X 1″ ID X 7/16″ HT

525-242

619-640 (50-640), 619-643 (50-643),
619-644 (50-644), 619-646 (50-646), 619-647 (50-647),
619-648 (50-648), 619-650 (50-650), 619-651 (50-651),
619-653 (50-653), 619-655 (50-655), 619-656 (50-656).

632802
632816

Carburetor Float
For Tecumseh engines with Walbro
carburetors. Fits Walbro carburetor
models LMJ, LMK & LMR series carburetors.
Measures: 1-17/32” OD X 21/32” ID X 21/32” HT

485-862

C

(Sold in multiples of 10)

631028

Bowl Gasket
Fits Tecumseh float bowls
631700 (Banta# 525-591) and
631867 (Banta# 525-526).
Measures: 2-1/16″ diameter

(Sold in multiples of 10)

730638

Float Bowl Assembly
Repair Kit for
Tecumseh carburetors.
Fits Tecumseh carburetors
640065, 640065A and
640176 used on OHV110,
OHV115, OHV120,
OHV130 and OHV135.

525-008

525-011

30356

Bowl Gasket
Fits Walbro & Carter made
carburetors (small bowl).
Measures: 1-15/16″ diameter

Gravely# 10925
Kohler# 200375

730639

730235B

Float Bowl Assembly
Repair Kit for
Tecumseh carburetors.
Fits Tecumseh carburetors
632671, 632671A and
632671C used on VLV126,
VLV40, VLV50, VLV60,
VLV65, VLV66, VLX50
and VLX55 (NON-EPA).

619-641 (50-641), 619-649 (50-649),
619-652 (50-652) and 619-654 (50-654).

485-888

27109

525-010

Aftermarket carburetors only

Carburetor Float for OREGON
brand carburetor only.
Found in Banta Saw carburetor#’s

614-404

485-870

Application

Float Bowl Assembly
Repair Kit for
Tecumseh carburetors
Fits Tecumseh carburetors
632786A, 640034,
640034A, 640072, 640072A,
640159 used on OHV135,
OHV14, OHV140, OHV145, OHV15, OHV150, OHV155,
OHV16, OHV160, OHV165, OHV17, OHV170 & OHV175.

Aftermarket carburetors only

Carburetor Float
for OREGON brand
carburetor only.
Found in Banta Saw carburetor#’s

525-243

O.E.M

525-007

Walbro# 154-503

Bowl Drain Assembly
Fits on Tecumseh carburetor bowls.

525-240

Part#

continued

Bowl Gasket
Fits Carter and
Walbro large bowl carburetors.
Measures: 2-3/8″ diameter

For use with our 525-240 float

525-220

Banta

Float Bowl Assembly
Repair Kit for
Tecumseh carburetors.
Fits Tecumseh carburetors
640020, 640020A,
640020B, 640158
and 640158A used on
VLV126, VLV50, VLV55,
VLV60, VLV65 and VLV66.

490-201
(Sold in multiples of 10)

730637A

31386

Governor Spring
Fits models LAV25, LAV30,
LAV35, LAV40 and LAV50.

12-09

(Sold in multiples of 10)

C

Banta

CARBURETOR PARTS

TECUMSEH
Part#

O.E.M

490-219

31361

TECUMSEH

continued
Application

Governor Spring
Fits models LAV25, 30, 35,
(Sold in multiples of 10)
40 and 50, ECV100, 105,
110, 120, TVS100, 105,
TVXL105, V40, 50, 60, 70, 80, VH40, 50, 60, 70 and 80.

525-516

631937A

631935A

525-204

John Deere#
AM32930

631026

631781

630932A

Needle Valve Assembly
Fits models LAV, V, VH, H22
thru H35, HS40, 638, 650 and 670.
For diaphragm type carburetors.

525-044

Aftermarket carburetors only

29156

Clinton# 293-30-5
Walbro# 200-547
Walbro# 200-506

Needle Valve for
OREGON carburetor only
Found in Banta Saw carburetor#’s
619-640 (50-640), 619-643 (50-643),
619-644 (50-644), 619-646 (50-646), 619-647 (50-647),
619-648 (50-648), 619-650 (50-650), 619-651 (50-651),
619-653 (50-653), 619-655 (50-655) and 619-656 (50-656).

525-045

Aftermarket carburetors only

632709

631021B

631021
631021A

Float Valve
Fits models LAV, V, VH, VM, TNT,
TVS, H22 thru H80, HH40 thru HH70,
HM80 thru HM100, HS, 638, 650 & 670.
(Float type carburetors)

C

631583

630978

Needle & Seat Kit
Fits Tecumseh carburetor.
(Same as our 525-212 but
includes float bowl gasket & washer)

525-212

527-317

Adjustment Screw Assembly
Fits models H80, HM70, HM80,
CA-631678B thru CA-631958.

Inlet Needle & Seat
Found on Tecumseh models:
OH318, OHM, OHV, OV, TVT, VLV and VTX.
Vector & Series VII carbs. Replaces#’s 632551 & 632637

525-213

Adjustment Screw Assembly
Fits models
CA-C630958B thru CA-632759.

527-739

Float Valve Kit Fits
Fits carburetor models:
LMB-115-1, 116-1, 117-1,
121-1, 125-1 thru 130-1, 132-1, 136-1 thru 140-1, 142-1,
148-1, 150-1, 151-1, 155-1, 155-1, 165-1, 168-1, 195-1,
209-1, 210-1, 212-1, 213-1, 216-1, 217-1, 219-1.

525-214

31839

Application

Adjustment Screw Assembly
Fits models OVRM60,
CA-630987A thru CA-632713A

Diaphragm Kit
Fits models LAV, V, VH,
H22 thru H35, HS40, 638, 650 and 670.

525-402

525-337

525-345

Bowl Nut
Carburetor models:
632052, 632086,
632087, 632088, 632162, 632050A,
632388, 632389 & 632532. (brass material)
Size: 3/8″-24 THD - 1/2″ hex X 13/16″ HT

530-204

O.E.M

Adjustment Screw Assembly
Fits models
CA-63128 thru CA-632710.

Bowl Nut
Fits small hole bowls
(brass material).
Carburetor models:631936, 631939,
632046, 632051, 632052, 632086, 632087, 632088,
632162, 632050A, 632388, 632389 and 632532.
Size: 3/8″-24 THD - 1/2″ hex X 11/16″ HT

525-517

Part#

continued

Needle Valve for
OREGON carburetor only.
Found in Banta Saw carburetor#’s
619-641 (50-641), 619-649 (50-649),
619-652 (50-652) and 619-654 (50-654).

525-558

27106
631024

Lawn Boy# 300096
Lawn Boy# 92-6389

Carburetor Float Pin
Fits models CA-630883 thru
CA-632329A carburetors.
Measures: 3/32″ OD X 15/16″ Long

525-386
Idle Screw

12-10

(Sold in multiples of 10)

27112

Walbro# 102-14
(While Quantities Last)

C

CARBURETOR PARTS
TECUMSEH
Part#

O.E.M

120-210

632047
632047A

TILLOTSON

continued
Application

Primer Bulb
Fits models LAV, V, VH, H22 thru H35,
HS40, 638, 650 and 670, also TNT100, TNT120, ECV100,
ECV105, ECV110, ECV120; CA-631849A thru CA-632795
carburetors; TEC-632804, TEC-640173 & TEC-640196

120-289

0036045A
36045
36045A

632694A

615-674

615-772

615-229

615-203

155A53
(Sold in multiples of 10)

155A27

(Sold in multiples of 10)

155A29

155A26

Needle and Seat Assembly
Fits HL series carbs.
Use with our 615-508 lever
(non fork type)
(Original Tillotson)

(Priced Individually)

615-205

Walbro# 88-97

(Priced Individually)

(While Quantities Last)

95-197

Screen
Fuel Screen fit HK
series carburetors.
Size: 1/4″ X 3/8″ oblong

615-617

34-210
34-219

233-664-P

Needle and Seat Assembly
Fits HL series carbs.
Use with our 615-516 lever
(fork type)
(Original Tillotson)

615-609

363-501

(Sold in multiples of 10)

233-652

(Priced Individually)

Inlet Needle 3/8″ Long
(Sold in multiples of 5)
Fits HK series carburetors,
also replaces Walbro# 82-82 inlet needle

C

155A23

Fuel Inlet Lever
Fits HS series carburetors.
(Original Tillotson)

631027

Check Valve
Fits HL series carburetors.
(Original Tillotson)

(Sold in multiples of 5)

Fuel Inlet Lever
Fits HD and HL series
(Sold in multiples of 10)
carburetors - non fork lever design
and and also some HD series carbs (Original Tillotson)

615-526

TILLOTSON
615-732

615-508

Application

Fuel Inlet Lever
Fits HU series carburetors,
(Sold in multiples of 10)
also found on Walbro: WA, WT, WY
& WZ model carburetors. (Original Tillotson)

630748

Welch Plug
Measures: 9/16″ diameter

Inlet Needle 5/8″ Long
Fits HS series carburetors, also
replaces Walbro# 82-75 inlet needle

615-518

630746

Welch Plug
Measures: 7/16″ diameter

34-216
34-188

Fuel Inlet Lever
Fits HD and HL series
carburetors with fork lever design.
(Original Tillotson)

23120003 / 321802A
32184 / 570442A
570629A / 570629B

Welch Plug
Fits WA & WT series carburetors.
Measures: 5/16″ diameter

615-211

615-516

Primer Bulb Assembly
Found on many snowblower applications.
(Non Original Tecumseh Part).

615-690

O.E.M

continued

Fuel Inlet Lever
Fits HK series carburetors fork lever design. (Original Tillotson)

Primer Bulb
For VLV and ELV engines.
(with vented hole)
Fits carburetor models 632646,
632669, 632670, 632681 and 632756.

120-290

Part#

615-500

Primer Bulb
Fits Vector carburetor models:
VLV-50, VLV-60, VLV-65,
VLV-66, VLV-126 and TVS90. Includes lock washer.

120-807

Banta

95-177

Screen
Fuel Screen fit HS and HU
series carburetors.
Size: 1/4″ diameter

12-11

(Priced Individually)

(Priced Individually)

C

Banta

CARBURETOR PARTS

TILLOTSON
Part#

O.E.M

615-700

179-55

Application

Welch Plugs
Fits HL series carburetors.
Replaces Tillotson# 179-55.
Size: 3/8” diameter.

615-708

(Priced Individually)

179-62

Welch Plugs
Fits HU series carburetors.
Replaces Tillotson# 179-62.
Size: 9/32″ diameter

615-716

(Priced Individually)

179-59

179-60

Welch Plugs
Fits HS series
carburetors. (Small)
Replaces Tillotson# 179-60.
Size: 7/32″ diameter

623-587

75-570

(Priced Individually)

Fuel Inlet Lever
Fits WB and WS
model carburetors.

84-213

B&S# 398188

92-56

82-82

614-520
(Sold in multiples of 5)

(Sold in multiples of 10)

92-16

Carburetor Bowl Gasket
Fits Walbro large bowl carbs.
Measures: 2-3/8″ diameter.

Also replaces Tillotson# 34-210 & 34-219

(Sold in multiples of 10)

Walbro# 17664
Walbro# 176641
Walbro# 17675

Echo# 12317135630
Shindaiwa#
2003681370
Stihl# 41331215000
Stihl# 42661215200

82-26
82-75
(Sold in multiples of 5)

Also replaces Tillotson# 34-216 & 34-188

200503
200506
200547

Clinton# 293-30-5
Tecumseh# 29156

Float Valve Kit
Fits carburetor models: LMB-115-1, 116-1, 117-1, 121-1,
125-1 thru 130-1, 132-1, 136-1 thru 140-1, 142-1, 148-1,
150-1, 151-1, 155-1, 155-1, 165-1, 168-1, 195-1, 209-1,
210-1, 212-1, 213-1, 216-1, 217-1, 219-1.

C

(Sold in multiples of 10)

Needle & Seat
For Max and Quantum engines
using Walbro LMS1, 3 and 10 series carburetors.
Fits models 83400, 90700, 91700, 99700, 100700,
110700, 111700, 114700 and 121700 thru 126800.

485-870

WALBRO

525-402

(Sold in multiples of 10)

166-55

Carburetor Bowl Gasket
Fits Walbro small bowl carbs.
Measures: 1-15/16″ diameter.

Carburetors mount gasket
For Tillotson “HT” series carburetors.

Inlet Needle
Fits WA and WT series carburetors.

166-48

Fuel Inlet Lever
Fits HU series carburetors,
also found on Walbro: WA,
WT, WY & WZ model carburetors.
(Original Tillotson).

485-888

623-583

615-211

B&S# 398187

Carburetor Float
Fits LMJ, LMK and LMR
series carburetors.
Fits B&S & Lawn Boy engines with Walbro carburetors.
Size: 21/32″ ID X 1-17/32″ OD X 21/32″ H (Made of nylon).

525-840

16B-216

Inlet Needle
Fits WA & WT series carburetors.

614-404

Application

(also replaces Tillotson# 155A26)

Carburetors mount gasket
For Tillotson “HL” series carburetors.

615-229

O.E.M

615-526
(Priced Individually)

continued

Part#

615-518

Welch Plugs
Fits HS series
carburetors. (Large).
Replaces Tillotson# 179-59
Size: 11/32″ diameter

615-724

WALBRO

continued

(Priced and sold individually)

Check Valve
For Walbro carburetors.
Fits most WT, WY, WYA, WYB, WYJ, WYK & WYL series
Walbro carburetors that use primer bulbs. Also found on
WA-167, WA-179, WA-192, WA-193, WA-213, WA-223 and
WA-224 series carburetors. Replaces Walbro#’s 176-64-1,
176-64 and old Walbro# 176-75.

615-027

188-13

Primer Bulb
Fits HDA and WYK series carburetors.
Measures: 15/16″ flange OD X 11/16″ HT

12-12

C

CARBURETOR PARTS
WALBRO

WALBRO

continued

Part#

O.E.M

615-025

188-16
188-161

Application

Poulan# 530-035497

Primer Bulb
Fits WA and WT series carburetors.
Walbro models: WA-224-1, 226-1, 228-1, 229-1, 230-1,
232-1 and WT-501-1, 519-1, 557-1, 558-1, 586-1, 587-1,
592-1, 606-1, 626-1, 630-1, 631-1, 632-1 and 638-1.
Measures: 13/16″ flange OD X 3/4″ HT (Red colour)

615-023

188-12
188-121

615-024

188-15
188-151

615-513

188-513
188-513-1

Primer Bulb Assembly
Fits WT-119C and WT265
Walbro carburetors. Found on many Poulan / Weedeater
trimmer applications as well as many others. Poulan
models: 222, 262, BH2160, BH2660, PP220LE, Titanium
2550T, 255 FLW, SM4018, 2050, 2055, 2150, 2175, 2250,
2375, 2450, 2550, PP220 and PP260. Mounting plate
measures: 1-5/16” L X 13/16” W, Two mounting holes on
28mm centers. (2) line primer with the same sized lines.

614-509

188-11

188-506

188-508

188-509

Primer Bulb Assembly
Fits HDA-51, WA-180, WA-181,
WA184, WA-185, WA-187,
WA-194, WT-139, WT-145, WT-184,
WT-243 & WT-50 model carburetor.

Stihl# 0000-350-6202
Stihl# 1130-350-6200

614-511

Primer Bulb Assembly
MOUNTING HOLE: .576”. Found on
Stihl concrete / cut off saw models: TS400 and TS800.
Fits Stihl Blower model: BR500 plus many other makes /
models. (Uses our 615-028 replacement primer bulb). Note:
This primer assembly has a coil spring inside the primer bulb.
(NOTE: To fit larger mounting hole see our 615-511 primer).
Stihl# 0000-350-6202

Primer Bulb Assembly.
MOUNTING HOLE: .758”.
Found on Stihl concrete / cut off
saw models: TS700 and TS800. Fits Stihl Blower models:
BR500, BR550 and BR600 plus many other makes /
models. (Uses our 615-028 replacement primer bulb).
Note: This primer assembly has a coil spring inside the primer
bulb. (NOTE: To fit smaller mounting hole see our 615-514 primer).

C

Primer Bulb Assembly
Fits WT23A, WYJ33, WYJ34,
WYJ45 & WYJ86 Walbro carburetors.
Found on Ryobi and many other trimmer makes.
MOUNTING HOLE: .595” (Uses our 615-020 primer bulb).

Primer Bulb Assembly
Fits HDA-97 model carburetor.

Primer Bulb
Fits WZ series carburetors.
Measures: 3/4″ flange OD X 1/2″ HT

615-511

188-512

614-508

Primer Bulb
Fits WA and WT series carburetors.
Found on Poulan models equipped with
Walbro carburetor models: WA-225-1 and WT-379.
Measures: 3/4″ flange OD X 9/16″ HT (Red colour)

615-514

615-512

Application

Primer Bulb Assembly
Fits WA-135, WA-148A,
WA-150, WA-154,
WA-161& WA-162 model carburetors.

Poulan# 530-035496

615-026

O.E.M

614-506

Primer Bulb
Fits WA, WT, WY, WYJ,
WYK and WZ series carburetors.
Measures: 3/4″ flange OD X 5/8″ HT

continued

Part#

188-14

Primer Bulb
Fits WT series carburetors.
Found on Echo models: PB2400,
SRM3100, SRM3400 and SRM3800. Walbro models:
WT-137-1, 193-1, 212-1, 251-1, 274-1, 297-1, 305-1,
308-1, 314-1, 333-1, 344-1, 365-1, 415-1, 417-1, 424-1 and
WT-462-1. Measures: 3/4″ flange OD X 11/16″ HT

615-020

Banta

188-511

Primer Bulb Assembly
Fits WA-140 model carburetor.
External mount.

614-069

140-69
140-36
140-37

Screens
Check Valve Screens.
Fits WA & WT series carburetors.
Size: 3/16″ diameter

614-070

(Priced Individually)

140-70
140-33

Screen
(Priced Individually)
Fuel Inlet Screen
Fits WA and WT series carburetors.
Size: 11/32″ diameter.

12-13

C

Banta

CARBURETOR PARTS

WALBRO
Part#

O.E.M

615-748

88-115

Application

Welch Plugs
Size: 3/16″ diameter

615-756

(Priced Individually)

(Priced Individually)

(Priced Individually)

615-674

(Priced Individually)

88-175
88-55 (old)
(Priced Individually)

(Priced Individually)

88-97

Welch Plugs
Size: 9/16″ diameter

(Priced Individually)

Carburetor Mount Gasket
For Walbro SDC, WS,
WJ and Zama C2 series carburetors.

16-110-8

Carburetor Intake Gasket
Gasket Rubber Ring / Seal.
Fits Walbro “WZ” carburetors.
(Replaces Walbro# 16-110-8).

623-582

16-101-8

Carburetor Intake Gasket
Gasket Rubber Ring / Seal.
Fits Walbro “WZ” carburetors.
(Replaces Walbro# 16-101-8).

C

Application

(Sold in multiples of 5)

0018002

Inlet Needle
Found in some Zama carburetors.
Measures: 5/8″ long

(Sold in multiples of 5)

0057003
0057004

Primer Bulb
Found on Zama C1Q / M series and
some C1U series carburetors.
Measures: 7/8″ flange OD X 5/8″ HT

615-708

0004001

(Priced Individually)

Mount Gasket

Intake Mount Gasket
Universal type - Fits Zama,
Tillotson and Walbro carburetors.

(Sold in multiples of 10)

0005004

Welch Plug
For Zama Carburetors.
Replaces Zama# 0005004.
Oblong - Long version.

615-706

(Priced Individually)

0005002

Welch Plugs
Fits C2, C2S, C3 & M1
series carburetors.
Size: 3/8″ diameter.

615-704

(Priced Individually)

0005001

Welch Plugs
Fits C1, C1S, C1U,
C1M & C2 series carburetors.
Size: 9/32″ diameter.

623-576

623-580

623-581

Inlet Needle
Found in some Zama carburetors.
Measures: 3/8″ long

615-764

88-56

Welch Plugs
Found in MDC series carburetors.
Size: 1/2″ diameter

615-772

0018004

Screen
Fuel inlet screen.
replaces Zama# 0004001
Size: 1/4″ diameter.

Welch Plugs
Size: 7/16″ diameter

615-666

615-229

615-617

88-180
88-23 (old)

Welch Plugs
Size: 3/8″ diameter

O.E.M

615-028

88-171
88-28 (old)
88-54 (old)

Welch Plugs
Fits WA and WT series carburetors.
Size: 5/16″ diameter

615-764

Part#

615-211

88-136
88-110

Welch Plugs
Fits WA & WT series carburetors.
Size: 1/4″ diameter

615-690

ZAMA

continued

(Priced Individually)

0005016

Welch Plug
For Zama Carburetors.
Replaces Zama# 0005016.
Oblong - Short version.

(Priced Individually)

NOTE: For Chainsaw & Snowblower Parts
see our “Fall / Winter” catalogue sections
“14”, “16” and “40”

12-14

C



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Banta
Create Date                     : 2013:04:03 09:05:10-04:00
Modify Date                     : 2013:04:03 09:05:10-04:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Banta
Title                           : Section12_CarburetorParts.indd
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.5.3 (Windows)
Document ID                     : uuid:1d2016fb-ea23-40b1-be37-63dd04bea2e5
Instance ID                     : uuid:bf74c042-7c26-41d3-8fb5-5ca848fde3b4
Page Count                      : 14

EXIF Metadata provided by EXIF.tools