Section 009 DOC ACTIVE KGL 100, 40 T Cleveland Range 100 Specsheet

User Manual: KGL-100, KGL-40-T

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadSection 009 DOC ACTIVE KGL-100, KGL-40-T Cleveland Range KGL-100 Specsheet
Open PDF In BrowserView PDF
Project ________________________________
™

Cleveland

Item __________________________________

GAS KETTLES

Approval _______________________________

Quantity _______________________________
FCSI Section ____________________________

Date __________________________________

LEG TYPE, GAS-FIRED KETTLES
STATIONARY, 2⁄3 STEAM JACKETED
“SPLASH PROOF SERIES”
40, 60, 80 or 100 GALLONS (150, 225, 300 or 337 LITERS)

MODELS:  KGL-40  KGL-80
 KGL-60  KGL-100

Cleveland Standard Features
I High efficiency Power Burner Heating System

(62% to 65% efficiency)

I Fast Heat-up and Recovery Time, 140M BTU’s on 40 gallon

models, 190M BTU’s on 60 gallon and larger

I Insulated Heat Exchanger

I Automatic Ignition System

I Steam jacket permanently filled with treated, distilled water.

Venting and/or refilling not required

I Solid State Controls, for Temperature and Low Water Safety,

in a plug-in Control Module

I Control Panel includes:
I

Precise, consistent temperature control: less than
± 1°C variance (ideal for simmering).
I L.E.D. Indicators for Heat Cycle and Low Water
I Warning.
I Power “on/off” Switch
I

I Front mounted combination Pressure/Vacuum Gauge
I Type 304 Stainless Steel with #4 finish on kettle and

supports

I 2˝ diameter Tangent Draw-Off Valve with Drain Strainer

I Support Legs with level adjustable feet, flanged for floor

Short Form Specifications

bolting

I Spring-assisted, hinged, rotatable, domed Stainless

Shall be CLEVELAND, Gas-fired Stationary Kettle, Model
KGL-_____ ; _____ gallons. 2⁄3 Steam Jacketed, Power Burner Heating
System, Insulated Heat Exchanger, 50 psi Steam Jacket Rating.
Infinite Variable Temperature Control, L.E.D. indicators for Heat Cycle
and Low Water Warning, spring-assisted Cover, 2˝ Tangent Draw-off
Valve with Drain Strainer, Automatic Ignition System.

Steel Cover

I 50 PSI Steam Jacket Rating and Safety valve

I Standard voltage is 115 volts, 60 Hz, single-phase, supplied

with cord and plug

I Standard for natural gas operation
I Faucet Mounting Bracket (FBK)

I Typical approvals include AGA, CSA, CE, NSF and ASME

Options & Accessories
Ë Type 316 Stainless Steel Kettle Liner for high acid food
products (316)
Ë Hot and Cold Water Faucet with Swing Spout (DPK)
Ë Cooking Baskets and Tri-Basket Supports (BS and TBS)
Ë Drain Strainers (DS-)
Ë 3" diameter Tangent Draw-off Valve with Drain Strainer (TD3)

Ë Kettle Accessory Kit (KAK) includes:
Ë Clean-up Brush(CB)
Ë 36” Kettle Paddle (KP)
Ë 36” Kettle Whip(KW)
Ë 36” Kettle Brush (KB)
Ë Draw-off Brush (DB)
Ë 24 oz. Ladle (KL)
Ë Automatic Water Meter (GMF or LMF)
Ë Measuring Strip (MS)
Ë Option for Propane Gas operation
Ë Correctional Package
Ë Heat Deflector Shield (HS001)

SECT.

IX PAGE 9
0609

1333 East 179 St.,

Tel: 1-216-481-4900

Web Site: www.ClevelandRange.com

Cleveland, Ohio, U.S.A. 44110

Fax: 1-216-481-3782

Email: Steam@ClevelandRange.com

K
J
A

H

3 (77 mm)

4" (102 mm)

M
N

O
B

4 7/8"
124 Ø mm

7/16" (11 mm) Ø
3 HOLES ON
3 1/8" (80 mm) Ø
B.C.D.

L

120º
TYP

C

1 5/8" (42 mm) Ø

1" (25 mm)
MAX. ADJUSTMENT

FLANGED FOOT DETAIL

FLOOR DRAIN
12" (305 mm) WIDE x
12" (305 mm) LONG

VALVE
OPENING
P

9/16"
14 mm

S

3" (77 mm)
MINIMUM
CLEARANCE
T
(I.D.)

75º

G
(COVER
OPEN)
H C
D

4" (102 mm)
RECOMMENDED

RECOMMENDED
FLOOR SLOPE

1" (26 mm) per 4' (1220 mm)

F
PIPE DRAIN RECOMMENDED
min. valve size plus 1" (26 mm)

E

UNIT SHOWN WITH OPTIONAL 2" TANGENT DRAW-OFF VALVE,
SPRING ASSIST COVER AND HOT & COLD WATER FAUCET.

DIMENSIONS
GALS./
LITERS
40
150
60
225
80
300
100
375

IN
mm
IN
mm
IN
mm
IN
mm

CAPACITIES: (in 8 oz. servings,
other sizes may be calculated)
40 Gallon / 150 liters . . . 640 servings
60 Gallon / 225 liters . . . 960 servings
80 Gallon / 300 liters . . . 1280 servings
100 Gallon / 375 liters . . . 1600 servings

A

B

C

D

35 1/8
893
38 1/4
972
41 5/8
1058
44
1118

37
940
39
991
42 3/8
1077
43 1/2
1105

32 1/4
820
34 1/4
870
35 1/2
902
36 1/2
928

40 1/2
1029
43 1/2
1105
45 1/2
1156
47 1/2
1207

E

F

G

H

9 1/4
16 71 1/2
235
407 1817
8 3/4 14 1/4 75
223
362 1905
8 3/4 15 1/2 79
223
394 2007
8 3/4 15 1/2 83 1/2
22.3 394 2121

9 9/16
243
8 15/16
228
9 1/4
235
9 1/8
232

J

GAS
NATURAL
Piping: 3⁄4˝ N.P.T.
Supply pressure:
4.00˝ W.C. minimum
14.00˝ W.C. maximum

PROPANE
Piping: 3⁄4˝ N.P.T.
Supply pressure:
4.00˝ W.C. minimum
14.00˝ W.C. maximum

K

L

17 3/4 25 15/16 10 3/8
451
659
264
19 1/8 29 5/16 10 3/8
486
745
264
20 3/4 32 1/4 10 3/8
528
820
264
21 7/8 34 5/8 10 3/8
556
880
264

M

N

O

18 5/8
474
18 5/8
474
18 5/8
474
18 5/8
474

26 7/8
683
27 7/8
709
29 5/8
753
31 1/4
794

28 1/2
724
30 1/4
769
31 1/2
801
32 1/2
826

ELECTRIC
B.T.U. RATING
40 gal. 140,000
60 gal.
80 gal. 190,000
100 gal.

Manufacturer must be notified if unit will be operated above 2,000 ft. altitude.

120V-1 Phase, 60 Hz, 10
amps

P

S

T I.D.

4 5/8 24 1/2 26
118
648
661
5 1/4
27 29 1/2
134
686
750
6 5/8
29
33
169
737
839
7 1/2 30 1/2 35 1/2
191
775
902

WATER

H

C

⁄2˝ dia. Soft
Copper
Tubing (each)
1

H C

When
ordered with
optional
faucet.

CLEARANCE
RIGHT = 3˝
LEFT = 3˝
REAR = 3˝
Allow 6˝ space minimum
from rear and sides when
located near combustible
walls. 12" recommended on
right side for service

NOTES:

Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.

SECT.

IX PAGE 10

0609
Litho in U.S.A.



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseThumbs
XMP Toolkit                     : 3.1-701
Modify Date                     : 2009:05:26 14:58:57-04:00
Create Date                     : 2009:05:26 14:56:38-04:00
Metadata Date                   : 2009:05:26 14:58:57-04:00
Creator Tool                    : QuarkXPress(R) 7.3
Format                          : application/pdf
Title                           :  Section 009 DOC ACTIVE.qxd
Document ID                     : uuid:f15d0eae-4a26-11de-98fc-00145116cba2
Instance ID                     : uuid:43f8e2b2-4a27-11de-98fc-00145116cba2
Producer                        : QuarkXPress(R) 7.3
Has XFA                         : No
Page Count                      : 2
Page Layout                     : SinglePage
Creator                         : QuarkXPress(R) 7.3
EXIF Metadata provided by EXIF.tools

Navigation menu