How Do I Configure The Printer Server Via TCP IP _for PS … Edimax Technology 3101P Config TCPIP PS3103&01

User Manual: Edimax Technology Printer PS-3101P

Open the PDF directly: View PDF PDF.
Page Count: 9

DownloadHow Do I Configure The Printer Server Via TCP IP _for PS-… Edimax Technology PS-3101P Config TCPIP-PS3103&01
Open PDF In BrowserView PDF
How to configure Printer Server through TCP/IP?
Author: Longcent
(2006.12.11)

This FAQ is applied to the below models and operation systems:
PS-3101 / PS-3103
Windows 2000/XP only

Introduction:
This installation guide is for walking you through the configuration of Edimax
Printer Server as shown in the below figure. No software is required for sharing Printers
in this way.

Step by step
Step one : Change the default IP of Edimax print server from
10.0.0.1 to fit within the IP ranges of your office LAN.
1.

Shut down both the Edimax print server and the PC used to configure the
prnter server. Power on the print server before booting up the PC.

2.

Connect the PC to the print server like figure below..

Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved

3.

Assign IP, 10.0.0.2 to the PC.

4.

Assign another IP address of print server to meet your office LAN
requirement. (Here we assign 192.198.2.22 to the print server. Please give
proper IP address to your Printer server based on your office networking
requirement.)

Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved

Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved

Step two : Connect the Print server to your office LAN.

Note : At this stage, all the PCs in your LAN is able to communicate with the print
server. Please set up your PC back to be within your office IP ranges,
192.168.2.20 for example or obtain the IP from the DHCP, if any..

Step three : Easy configurations on the PCs for using the printers
shared by Edimax print server.
5. Install the printer driver. (Please refer to the printer manual. In this guide, we
assume that you have installed the printer driver, HP LaserJet 1100)
6. Use Windows build-in wizard to add the print port using the IP,
192.168.2.22 of Printer Server.

Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved

Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved

Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved

Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved

Congradulations! All configurations are finished. Enjoy a cup of coffee and test
the printing.
Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved

Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 9
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:9c39442b-55ab-4836-bf98-c3a50c951398
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2007:01:24 21:51:17+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:01:24 21:51:17+08:00
Document ID                     : uuid:34c9921f-8f60-49fa-8d05-ab8e8b49a6ba
Format                          : application/pdf
Title                           : Microsoft Word - How do I configure the Printer server via TCP IP _for PS-…
Creator                         : kathryn_chou
Author                          : kathryn_chou
EXIF Metadata provided by EXIF.tools

Navigation menu