Contura EPS150 Insulation Technical Specifications Sheet
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 1
Warmup Plc | 702 & 704 Tudor Estate, Abbey Road, London, NW10 7UW | Tel 0845 345 2288 | Fax 0845 345 2299 | E-mail uk@warmup.com | Web www.warmup.co.uk
The WARMUP word and associated logos are trade marks. © Warmup Plc. 2013 - Regd. TM Nos. 1257757, 4409926, 5265707. E & OE. Registered in England No. 2955213.
Features:
• Boards are pre-routed at 200mm centres
• Suitable for almost any type of oor nish
• Available in a range of thicknesses
• Can be supplied with or without return ends
• Over joist & moisture resistant boards are also available
Contured EPS Technical Data:
EPS150*
Thermal conductivity
(@10ºC):
0.035W/mK
Compressive strength
(@10% compression):
150kPa
Thermal Resistivity: 28.57mK/W
Warmup Contura EPS Insulation is a routed EPS
insulation board for use in conjunction with Warmup
Diusion Plates.
The insulation boards are provided in 2400 x 1200mm
sheets and come in 30, 40, 50, 60, 70, 80, 90 and 100mm
thicknesses.
This type of insulation is primarily used in new build on
upper oors where insulation levels are higher which
will lower heat requirements and can be installed under
almost any type of oor nish.
* Results based on 100mm thick board
Warmup Contura Range - EPS Insulation
oor heating - guaranteed™
