Crane Total Product Catalogue

User Manual: Crane Total Product Catalogue

Open the PDF directly: View PDF PDF.
Page Count: 40

DownloadCrane Total Product Catalogue
Open PDF In BrowserView PDF
TOTAL PRODUCT
CATALOGUE
W AT E R

|

H E AT I N G

|

V E N T I L AT I O N

|

A I R

C O N

|

BALANCING VALVES
BALL VALVES
BUTTERFLY VALVES
CHECK VALVES
DRAIN COCKS
GATE VALVES
GLOBE VALVES
PIPE FITTINGS
RADIATOR VALVES
STRAINERS

OUR

GENIUS

IS

VA LV E S

&

PIPE

FITTINGS

G A S

Contents
Introduction

1

Valve Types

2

HVAC Quick Selection Guide

4

Gate Valves

6

Strainers

26

Globe Valves

12

Radiator Valves

28

Check Valves

15

Drain Cocks

30

Ball Valves

18

Thermal Balancing Valves
MultiTherm, EtaTherm,
MultiTee, TMV’s

31

Butterfly Valves

20

Flow Management Systems
CommPac

33

Static Balancing Valves

23

Flow Management Systems
Dominator Z3000

34

FULL TECHNICAL DATA AVAILABLE ON
WWW.CRANEFS.COM

CRANE FLUID SYSTEMS TOTAL PRODUCT CATALOGUE

Index of Figure Numbers

36

Pipe Fittings Summary

37

Introduction
Crane Fluid Systems

Health and Safety at Work Act

Crane Fluid Systems is a leading manufacturer of valves,
fittings and engineered products in the building services
and general industrial markets. We aim to be our
customers’ preferred supplier by offering products which
provide best value together with service levels that
exceed our customers’ expectations.

Every effort is made to ensure that when properly used, in
accordance with stated recommendations, goods
supplied are safe and without risk to health.

Customer Service
The satisfaction of customer requirements is the defining
philosophy of Crane Fluid Systems. The position we hold
in our markets is built on the foundations of product
availability from our network of distributors and providing
expert technical support to users of valves and pipe
fittings.
Customers’ orders are received via EDI, fax or telephone
by our Customer Service Administrators. Using our stateof-the-art computer-based Enterprise Resource Planning
System, we are able to immediately confirm product
availability and price. Our computers ensure orders are
seamlessly transmitted to our Production Managers who
regularly review factory plans to ensure customer
requirements are satisfied on time.
Comprehensive product selection and application advice
is just a phone call away. Our Internal Sales Engineers
are equipped to deal with complex valve application
needs, receiving customers’ drawings and producing
comprehensive valve schedules that will satisfy the
design parameters of the heating and ventilating system.
Our customers have come to regard this team as one of
the most reliable sources of technical support.

Quality Assurance
Rigid quality control and inspection at all stages of
manufacture ensure that Crane products are fully suitable
for their intended application and will give reliable
service. Every valve and pipe fitting is individually tested
in accordance with the relevant product standard.
Crane Fluid Systems is an approved manufacturer under
various independent quality schemes, including the
British Standards Institution (BSI) Kitemark, and is
ISO9001 accredited. In addition, the company has been
approved and/or listed by various user organisations
including the United Kingdom Water Fittings Bye Laws
Sheme (WRAS approved).

Should the purchaser be uncertain as to the suitability for
uses other than those stated, he/she should check with
the distributor or Crane Fluid Systems' technical team.

Control of Substances Hazardous to Health
Material supplied by Crane Fluid Systems does not
constitute “substances” as defined in the approved code
of practice of COSHH but complies with the requirements
of the Health and Safety at Work Act (1974).
Material supplied by Crane may be handled and stored in
complete safety.
Crane products are safe to use provided they are utilised
for their intended function and used within the limitations
specified by Crane.
Note: Material is defined as equipment, supplies and
spares that form the subject of a contract (ref. BS 4778).

Pressure Equipment Directive
All Crane Fluid Systems products have been assessed in
accordance with the Pressure Equipment Directive (PED)
97/23/EC and the Pressure Equipment Regulations 1999
No. 2001. Each product has been classified into a
conformity assessment category based on the intended
fluid contents – gas or liquid, the classification of the
intended fluid contents – Group 1 or Group 2, the
maximum allowable pressure and the nominal size (DN).
Crane products fall into either the “Sound Engineering
Practice” (SEP), Category 1, Category 2 or Category 3.
According to the directive, products classified as “SEP”
shall not be CE marked. Category 1 products will bear the
CE mark and those products classified as Categories 2
and 3 will bear the CE mark plus the number 0086. The
number 0086 is that of the British Standards Institute who
Crane have chosen as their “Notified Body” to monitor
their quality assurance system as required by the
directive.

CRANE FLUID SYSTEMS

1

Valve Types
Gate Valves

Ball Valves

Crane gate valves offer the ultimate
in dependable service wherever
minimum pressure drop is
important. They serve as efficient
stop valves with fluid flow in either
direction.

The Crane range of
copper alloy ball valves
consists of compact,
lightweight units which
are easy to install and
operate, yet their ability
to withstand robust
construction ensures
long, trouble-free service
life. They offer full flow
with minimum turbulence in the open position and bubble
tight closure in the closed position. Only a quarter-turn is
required to fully open or close the valve.

The straight through design offers
little resistance to flow and reduces
pressure drop to a minimum. A
gate-like disk – actuated by a stem
screw and handwheel – moves up and down at right
angles to the path of flow, and seats against two seat
faces to shut off the flow.
Gate valves are not recommended for throttling since the
control characteristic is not appropriate and subsequent
damage, due to erosion, may prevent the valve providing
an effective shut off.

Globe Valves
Crane globe valves are highly
efficient for throttling service
because seat and disk designs
provide flow characteristics with
proportionate relationships between
valve lift and flow rate. This assures
accurate flow control/regulation.
Globe valve bodies are normally of
spherical shape, ensuring maximum
strength against line pressures and
pipeline strains. Wide faced hexagon ends on threaded
valves provide a firm wrench grip which prevents damage
to the valve.

Butterfly Valves
Crane butterfly valves are
compact quarter turn
valves. The body is
elastomer lined providing a
resilient bubble tight shut
off.
The valves are supplied in
wafer or lugged variants
and may be lever or
gearbox operated.
Linings are EPDM or Nitrile rubber depending on the
intended service conditions.
Primarily recommended for on off service, they may also
be used for non critical throttling applications. Only a
quarter turn is needed to fully open or close the valve.

Strainers
Check Valves
Check valves permit flow in one
direction only, and close
automatically if flow reverses.
They are entirely automatic in
action, depending upon
pressure and velocity of flow
within the line to perform their
functions of opening and
closing.
Most Crane swing check valves can be installed in
horizontal or vertical upward flow piping. Lift check
valves must be used in horizontal lines only.

2

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

Scale and dirt in piping systems
can cause endless trouble and
serious damage to pipeline
equipment. Installation of Crane
strainers will help eliminate the
problems caused by foreign
matter within piping systems.
Generous proportions of Crane strainers allow the units to
collect significant quantities of foreign matter before
pressure losses necessitate cleaning of the basket.

VALVE TYPES

Radiator Valves
Crane radiator valves are
manufactured from high-grade
materials and use the same
functional design as the industrial
bronze globe and gate valve
patterns. Considerations of the
service for which the valve is
intended and also compliance with
related standards influences
dimensions, internal detail,
pressure/temperature ratings and
importantly, exterior appearance.

The Crane ProBalance range offers a wide variety of
Static Balancing Valves and Flow Management Systems,
providing the ultimate in accuracy and reliability.

Static Balancing Valves

Crane radiator valves are suitable
for building services installations
where durability and rugged
construction are predominant, while
satisfying the aesthetic requirements demanded for
modern commercial and domestic interiors.

MultiTherm/EtaTherm and MultiTee
For control of potable hot water
services. The Muliti-Therm family
enable a constant flow in the
system, maintaining temperature
and preventing dead-legs.
A thermostatic cartridge in the
MultiTherm is factory pre-set at
57ºC. Between 52ºC and 57ºC the
valve starts to close, restricting flow
and increasing temperature. When
set temperature is reached, a
minimum volume flows continuously
thus preventing dead-legs forming.

MultiTherm

Established H&V practice
recommends that wherever
possible within heating and chilled
water systems, hydraulic losses
should be minimal. Thus flow
measurement and regulating valves
serving such systems should
function with pressure losses as
low as efficient operation and high
accuracy will permit.
However, in certain circumstances
where flow velocities are low as a
result of system design, it is
equally important that adequate
differential pressures are available
for accurate flow measurement. This requirement is
achieved on the basis of a realistic compromise between
the need for accuracy and low hydraulic loss.
Crane flow measurement and regulating valves enable
systems design engineers to specify standard production
valves which will conform to the various system design
options arising from current H&V technology, energy
conservation considerations and standards legislation.

Flow Management Systems

EtaTherm

During disinfection, the water
storage temperature needs to be
increased above 62ºC and the
MultiTherm opens to allow
additional flow through the system.
After disinfection, the valve
automatically returns to the pre-set
MultiTee
position. MultiTherm is
recommended for systems with flow rates above 0.007
I/sec. EtaTherm is recommended for systems with flow
rates below 0.007 I/sec. MultiTee can be fitted at various
points in the system to enable temperature monitoring.

Alongside Crane’s
range of static
balancing valves, the
company can also
offer a range of
bespoke Flow
Management Systems,
designed to work
within fixed and
variable flow systems.
These are prefabricated units that combine the essential
control components and connecting pipework in one
compact module ready for simple and fast on-site
connection. These systems are assembled to order for
different specified purposes.

CRANE FLUID SYSTEMS

3

HVAC Quick Selection Guide
VALVE

CHILLED WATER, LTHW AND MTHW

BODY

VALVE TYPE

FUNCTION

AL

THREADED

GATE

CWS

MATERI

PN6

DZR

FLANGED

BRONZE

ISOLATION

BALL

THREADED
THREADED

D151A D151A D151A D151A D151A D151A
-

CAST

IRON

-

DZR

D171A

-

LUGGED WAFER

NON RETURN

SWING
CHECK

WAFER
CHECK

PIPELINE
PROTECTION

STRAINER
Y-TYPE

BRONZE

FLANGED

DRAW OFF BALL
DRAINING TAP

RADIATOR VALVES

-

-

-

-

-

-

D155C

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

FM52

-

-

FM52

-

FM57

-

FM63

-

D171A

-

D171A

-

-

-

D171C

-

D171C

-

F621 F611/2 F611 F611/2
F621 F621/2 F621 F621/2
F626 F626/7 F626 F626/7

-

D171 D171 D171 D171 D171 D171 D171 D171
D171A

-

D171A

-

D171A

-

D171A

-

-

-

-

-

D191

-

D191

-

-

D171C

-

D171C

-

D171C

-

-

-

D171C

-

-

F621 F621/2 F621 F621/2
F611 F611/2
WRAS WRAS WRAS WRAS

F614 F614/5 F614 F614/5
DM
DM
F624 F624/5 F624 F624/5
F624 F624/5 F624 F624/5
F614 F614/5
975G 975G WRAS WRAS WRAS WRAS
F628 F628/9 F628 F628/9

REFER
TO
CRANE

D140 D140 D140 D140 D140 D140 D140 D140

-

-

-

-

D140

-

-

-

-

-

-

-

D138

-

D138

-

-

-

-

-

-

FM469

-

-

-

-

-

-

-

FM469

-

-

-

-

-

-

FM492

-

-

-

-

-

-

-

-

-

-

-

-

-

FM451
FM453

-

FM451
FM455 FM455
FM453

-

-

-

-

-

-

-

-

-

-

-

FM450

-

FM450

-

-

-

-

-

-

-

-

-

-

-

D295
D297
D298

-

D295
D297
D298

-

D295
D297
D298

-

D295
D297
D298

-

D295
D297
D298

-

D295
D297
D298

-

D295
D297
D298

-

-

-

FM276

-

-

-

-

-

-

FM276

-

FM276

MALLEABLE
F273
IRON

-

F273

-

F273

-

-

-

-

-

-

-

-

D171

-

D171

-

D171

MHU

-

MHU

-

MHU

-

-

-

-

-

D295
BRONZE D297
D298
CAST
IRON

BRONZE

-

FM276 FM278 FM278
-

F273

-

-

-

-

D171
MHU

-

D171

MHU

BRONZE D340

-

D340

-

D340

-

-

-

D340

-

D340

-

-

-

-

-

BRONZE D3441/2
CHROME TRV
PLATED
BRASS
HANDWHEEL
-

-

D3441/2
D885
+T90

-

D3441/2
-

-

-

-

D3441/2

-

D3441/2

-

-

-

-

-

LOCKSHIELD

TRV HEAD WITH REMOTE SENSOR

-

D885
+T80

-

-

-

-

D887

-

-

TRV

-

-

D886
+T90

-

-

HANDWHEEL

-

-

D886
+T80

-

-

LOCKSHIELD

-

-

D886

-

-

2 METRES = D889 RS2
8 METRES = D889 RS8

STRAIGHT

TRV HEAD REMOTE TRANSMITTER
2 METRES = D889 RT2
8 METRES = D889 RT8

4

D151A D151A

-

-

D155C

-

D151 D151

-

-

D171A

-

-

D155C

D151A D151A D151A D151A

-

D138 D138 D138 D138 D138 D138 D138 D138

DRAW OFF COCK

ANGLE

≤50mm ≥65mm ≤50mm ≥65mm ≤50mm ≥65mm ≤50mm ≥65mm

-

-

-

OIL

-

RESILIENT SEAT CAST
IRON
METAL SEAT

THREADED

DRAINING

-

RESILIENT SEAT CAST
IRON
METAL SEAT

THREADED

-

DM160DM160DM160DM160DM161 DM161

DUCTILE
IRON

METAL SEAT

-

-

BRASS D191 D191 D191 D191 D191 D191 D191 D191

SEMI LUGGED

RESILIENT SEAT

≥65mm

BRONZE D171 D171 D171 D171 D171 D171 D171 D171

COMPRESSION BRONZE D171C

BUTTERFLY
(See Note 2)

AIR/GAS
(See Note 1)

DHWS

PN25

≤50mm ≥65mm ≤50mm ≥65mm ≤50mm ≥65mm ≤50mm

COMPRESSION BRONZE D155C

THREADED

PN16

BRONZE D151 D151 D151 D151 D151 D151 D151X D151X D151 D151 D151 D151

THREADED

FLANGED

PN10

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

QUICK SELECTION GUIDE

HVAC Quick Selection Guide
FUNCTION

TYPE

REGULATION

DOUBLE
REGULATING
VALVE

DRV

FLOW
MEASUREMENT
DEVICE

FMD

FLOW
MEASUREMENT

BODY
MATERIAL

THREADED

FLANGED

BRONZE

D921/D923*

-

CAST IRON

-

DM925G DM975G

DUCTILE
IRON

-

DM921

D901

DZR

D902*

STAINLESS

-

STEEL

-

DM900

D921 + D901
DRV
FMD

TWO
UNIT

DRV
+
FMD

DOUBLE
REGULATING
VALVE
+
FLOW
MEASUREMENT
DEVICE

CIRCUIT
BALANCING

SINGLE
UNIT

VODRV

FIXED ORIFICE
DOUBLE
REGULATING
VALVE

VARIABLE
ORIFICE
DOUBLE
REGULATING
VALVE

D923* + D902*
DRV
FMD

DUCTILE
IRON

-

DM921 DRV
DM900 FMD

CAST IRON

-

DM925G DRV
DM975G DRV
DM900 FMD

BRONZE
FODRV

*
**
†

BRONZE

D931
D933*
D934**

D981P†
D983P*†
D984P**†

-

CAST IRON

-

DM950G

DUCTILE
IRON

-

DM941/DA941

DUCTILE
IRON

-

DM931
DA931

LOW FLOW APPLICATIONS
ULTRA LOW FLOW APPLICATIONS
FOR USE WITH ACTUATOR

NOTES:
1) FOR AIR/GAS APPLICATIONS:The D191 ball valve is suitable for use on Group 1
gasses. All other products listed are only suitable for
use on Group 2 gasses.

2) ALL SEMI-LUGGED VALVES:F611, F621, F626, F612, F622, F627 valves are suitable for use with
flanges conforming to BSEN 1092-2 PN10 or PN16 and ANSI B16.1
Class 125 (sizes 2”-12”). Sizes 350mm to 600mm are suitable for use
with PN16 flanges only.
ALL FULLY-LUGGED VALVES:F614, F624, F628, F615, F625, F629 valves are suitable for use with
flanges conforming to BSEN 1092-2 PN10 or PN16. Sizes 65mm to
200mm. Sizes 250mm to 600mm are suitable for PN16 flanges only.

CRANE FLUID SYSTEMS

5

GATE VALVES

DZR
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D151A
PN20 BSEN 12288 SERIES B
DZR gate valve
Non rising stem
Female threaded ends to BSEN 10226

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3"

43
43
50
54
62
70
72
82
97
111

0.20
0.19
0.23
0.36
0.50
0.82
1.08
1.83
2.90
3.97

Figure number: D237A
PN20 BSEN 12288 SERIES B
DZR gate valve
Non rising stem, Lockshield operated
Female threaded ends to BSEN 10226

/2"
/4"
1"
11/4"
11/2"
2"

50
54
62
70
72
82

0.23
0.36
0.50
0.82
1.08
1.83

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D151
PN20 BSEN 12288 SERIES B
Bronze gate valve
Non rising stem
1
/4"-3 version BSEN 10226 Kitemarked to BSEN 12288
Female threaded ends to BSEN 10226 or NPT
WRAS listed

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3"
4"

46
46
51
55
63
71
73
83
96
105
162

0.27
0.26
0.27
0.38
0.59
0.84
1.25
1.88
4.37
6.40
19.7

Figure number: D237
PN20 BSEN 12288 SERIES B
Bronze gate valve
Non rising stem
Kitemarked to BSEN 12288
Female threaded ends to BSEN 10226
WRAS listed

/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"

51
55
63
71
73
83
96
105

0.27
0.38
0.59
0.83
1.25
1.88
4.15
6.24

Figure number: D155C
PN16 BS EN 12288 SERIES B
Bronze gate valve
Non Rising Stem
Compression ends to suit BSEN 1057
table 4 R250 Half Hard Copper

15mm
22mm
28mm
35mm
42mm
54mm

65
70
76
92
101
125

0.34
0.49
0.75
1.06
1.36
2.37

Figure number: D255C
PN16 BS EN12288 SERIES B
Bronze gate valve
Non Rising Stem, Lockshield operated
Compression ends to suit BSEN 1057
table 4 R250 Half Hard Copper

15mm
22mm
28mm
35mm
42mm
54mm

65
70
76
92
101
125

0.28
0.41
0.63
0.91
1.21
2.07

1
3
1

1
3

Bronze
DIAGRAM

6

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

1
3
1

1
3

GATE VALVES

Bronze (Threaded)
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D151X
PN25 BSEN 12288 SERIES B
Bronze gate valve
Non Rising Stem
Female threaded ends to BSEN 10226 or NPT
1
/4" to 3” BSEN 10226 versions kitemarked
to BSEN 12288

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3"

46
46
51
55
63
71
73
83
105
111

0.27
0.26
0.35
0.55
0.84
1.18
1.66
2.55
4.56
6.38

Figure number: D159
PN32 BSEN 12288 SERIES B
Bronze gate valve
Non Rising Stem
Female threaded ends to BSEN 10226 or NPT
1
/4" to 3” BSEN 10226 versions kitemarked
to BSEN 12288

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3

46
46
51
55
63
71
73
83
105
111

0.36
0.35
0.47
0.60
0.92
1.41
1.92
2.72
5.62
7.89

Figure number: D235
PN32 BSEN 12288 SERIES B
Bronze gate valve
Non Rising Stem, Lockshield operated
Female threaded ends to BSEN 10226 or NPT
1
/2" to 3” BSEN 10226 versions kitemarked
to BSEN 12288

/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"

51
55
63
71
73
83
105
111

0.47
0.60
0.92
1.41
1.92
2.72
4.90
6.40

Figure number: D166
PN32 BSEN 12288 SERIES B
Bronze gate valve
Rising Stem
Female threaded ends to BSEN 10226 or NPT
1
/4" to 3” BSEN 10226 versions kitemarked
to BSEN 12288

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3

46
46
51
55
63
71
73
83
108
117

0.32
0.31
0.46
0.72
1.10
1.50
2.25
3.20
5.80
8.52

Figure number: D180
PN32 BSEN 12288 SERIES A
Bronze gate valve
Rising Stem, Union Bonnet
Female threaded ends to BSEN 10226 or NPT

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3

46
46
51
55
63
71
73
83
108
117

0.32
0.31
0.46
0.72
1.10
1.50
2.30
3.20
5.80
8.50

Figure number: D185AT
PN64
Bronze gate valve
Rising Stem, Union Bonnet
Female threaded ends to NPT

/2"
/4"
1"
11/4"
11/2"
2"

61
70
81
88
96
109

0.81
1.20
1.96
3.24
4.64
7.37

1
3
1

1
3
1

1
3

1
3
1

1
3
1

1
3

CRANE FLUID SYSTEMS

7

GATE VALVES

Bronze (Flanged)
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: DM160
PN16 BS 5154 SERIES B
Bronze gate valve
Non Rising Stem
Flanged BSEN 1092-3

20mm
25mm
32mm
40mm
50mm
65mm
80mm

89
99
110
120
135
165
185

1.57
2.50
3.38
4.93
5.54
8.39
12.25

Figure number: DM161
PN25 BS 5154 SERIES B
Bronze gate valve
Non Rising Stem
Flanged BSEN 1092-3

20mm
25mm
32mm
40mm
50mm
65mm
80mm

90
100
110
120
135
165
185

1.73
2.50
4.33
5.75
7.50
10.80
14.40

Figure number: D160
Class 100 BS 1952 SERIES B
Bronze gate valve
Non Rising Stem
Flanged BSEN 1092-3

/4"
1"
11/4"
11/2"
2"
21/2"
3"

83
89
102
114
127
140
152

1.52
2.16
2.86
3.88
5.25
8.39
11.6

Figure number: D161
Class 150 BS 1952 SERIES B
Bronze gate valve
Non Rising Stem
Flanged BS 10 Table F

/4"
1"
11/4"
11/2"
2"
21/2"
3"

83
89
108
121
133
152
171

1.73
2.41
3.53
4.46
6.44
10.40
13.10

Figure number: D162
Class 150 BS 5154 SERIES B
Bronze gate valve
Non Rising Stem
Flanged ANSI 150

/4"
1"
11/4"
11/2"
2"
21/2"
3"

83
89
110
120
135
165
185

1.55
2.18
2.86
4.10
5.54
10.22
11.60

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D156
PN16 BSEN 12288 SERIES B
Brass gate valve
Non rising stem
Female threaded ends to BSEN 10226
or NPT

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3"
4"

41
41
48
54
62
68
72
82
97
111
131

0.20
0.20
0.22
0.35
0.52
0.77
1.02
1.75
2.77
3.90
6.35

3

3

3

Brass (Threaded)
DIAGRAM

8

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

1
3
1

GATE VALVES

Cast Iron (Flanged)
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: FM52
PN6 Cast Iron gate valve to BS EN 1171
Bronze trim, Non rising stem
Flanged ends to BSEN 1092-2 PN6

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

150
170
180
190
200
210
292
330
356

14
16
20
27
39
44
82
123
174

Figure number: FM57
PN10 Cast Iron gate valve to BS EN 1171
Bronze trim, Non rising stem
Flanged ends to BSEN 1092-2 PN10

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

178
190
203
229
254
267
292
330
356

14
17
22
30
41
47
85
146
188

Figure number: FM63
PN16 Cast Iron gate valve to BSEN 1171
Bronze trim, Non rising stem
Flanged ends to BSEN 1092-2 PN16

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

178
190
203
229
254
267
292
330
356

17.9
20.7
29.3
39.6
60.0
77.5
130.5
194.5
275.5

Figure number: FM124
PN16 Cast Iron gate valve to BS 5163
Non rising stem, WRAS listed
Flanged ends to BSEN 1092-2 PN16

65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

190
203
229
254
267
292
330
356

13.5
18.5
22.5
32.0
41.0
66.0
100.5
141.0

Figure number: F52
Class 100 Cast Iron gate valve to BS 5150
Bronze trim, Non rising stem
Flanged ends to BS 10 Table D or E

2"
21/2"
3"
4"
5"
6"
8"
10"
12"

146
159
165
171
191
210
241
273
305

13.6
15.9
20.0
27.2
39.0
44.5
81.6
122.9
174.2

Figure number: F53
Class 125 Cast Iron gate valve to BS 5150
Bronze trim, Non rising stem
Flanged ends to ANSI 125

2"
21/2"
3"
4"
5"
6"
8"
10"
12"

178
190
203
229
254
267
292
330
356

12.7
15.8
19.5
29.3
39.5
45.8
84.0
148.0
198.0

Figure number: F54
Class 100 Cast Iron gate valve to BS 5150
All iron, Non rising stem
Flanged ends to BS 10 Table D or E

2"
21/2"
3"
4"
5"
6"
8"
10"
12"

146
159
165
171
191
210
241
273
305

13.6
15.9
20.0
27.2
39.0
44.5
81.6
122.9
174.2

Figure number: FM125
As FM124 with Taper cap adapter
Flanged ends to BSEN 1092-2 PN16

CRANE FLUID SYSTEMS

9

GATE VALVES

Cast Iron (Flanged)
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F58
Class 125 Cast Iron gate valve to BS 5150
Bronze trim, Rising stem
Flanged ends to ANSI 125

2"
21/2"
3"
4"
5"
6"
8"
10"
12"

178
190
203
229
254
267
356
330
356

17
20
28
38
56
60
112
185
242

Figure number: F59
Class 125 Cast Iron gate valve to BS 5150
Iron trim, Non rising stem
Flanged ends to ANSI 125

2"
21/2"
3"
4"
5"
6"
8"
10"

178
190
203
229
254
267
392
330

12.7
15.8
19.5
29.3
39.5
45.8
84.0
148.0

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

178
190
203
229
254
267
292
330
356

21
25
35
50
70
90
141
223
304

2"
21/2"
3"
4"
5"
6"
8"
10"
12"

178
190
203
229
254
267
292
330
356

21.5
24.8
29.5
42.7
72.3
88.1
140.0
225.0
314.0

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F174
PN16 Malleable Clamp gate valve
Bronze trim, Rising stem
Threaded NPT
Sizes 21/2-4” PN12

/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"
4"

52
59
65
73
80
92
105
116
141

0.8
1.1
1.6
2.6
3.2
5.1
9.0
10.5
23.7

Figure number: F179
PN16 Malleable Clamp gate valve
Iron trim, Rising stem
Threaded to BS 21
Sizes 21/2-4” PN12

/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"
4"

52
59
65
73
80
92
105
116
141

0.8
1.1
1.6
2.6
3.2
5.1
9.0
10.5
23.7

Figure number: F182
PN16 Malleable Clamp gate valve
Iron trim, Rising stem
Threaded NPT
Sizes 21/2-4” PN12

/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"
4"

52
59
65
73
80
92
105
116
141

0.8
1.1
1.6
2.6
3.2
5.1
9.0
10.5
23.7

Figure number: FM82
Cast Iron gate valve to BSEN 1171
Bronze trim, Rising stem
Flanged ends to BSEN 1092-2

Figure number: F84
Class 125 Cast Iron gate valve to BS 5150
Bronze trim, Rising stem
Flanged ends to ANSI 125

Malleable Iron (Threaded)
DIAGRAM

10

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

1
3

1
3

1
3

GATE VALVES

Malleable Iron (Flanged)
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F183
Iron trim, Rising stem
Flanged to ANSI Class 125

1"
11/2"
2"
21/2"
3"
4"

81
95
108
125
129
172

2.5
4.6
6.5
10.0
14.5
27.0

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: 47XU-F
Class 150 Carbon Steel Gate Valve to API 600
Outside screw and yoke
Flexible Wedge Disk
Carbon Steel to ASTM 216 Grade WCB

2"
21/2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"

178
191
203
229
267
292
330
356
381
406
432
457
508

21
32
35
50
80
141
207
295
391
509
636
966
1418

Figure number: 33XU-F
Class 300 Carbon Steel Gate Valve to API 600
Outside screw and yoke
Flexible Wedge Disk
Carbon Steel to ASTM 216 Grade WCB

2"
21/2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"

216
241
282
305
403
419
457
502
762
838
914
991
1143

34
36
49
75
145
227
345
464
627
891
1114
1768
2860

Figure number: 76XU-F
Class 600 Cast Steel Gate Valve to API 600
Outside screw and yoke
Flexible wedge disc
Carbon Steel to ASTM 216 Grade WCB

2"
21/2"
3"
4"
6"
8"
10"
12"

292
330
356
432
559
660
788
838

38
59
73
136
290
490
703
953

Cast Steel
DIAGRAM

CRANE FLUID SYSTEMS

11

GLOBE VALVES

Bronze (Threaded)
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D4
PN20 BS 5154 SERIES B
Bronze globe valve
Metal disc, Screwed bonnet
Female threaded ends to BS 21 or NPT
1
/4" to 2” BS 21 versions kitemarked

/4"
/8"
1
/2"
3
/4"
1"
11/4"
11/2"
2"

44
44
55
63
77
91
98
118

0.23
0.22
0.31
0.42
0.71
1.12
1.50
2.48

Figure number: D7
PN32 BS 5154 SERIES B
Bronze globe valve
Renewable disc, Union bonnet
Female threaded ends to BS 21 or NPT
1
/4" to 3” BS 21 versions kitemarked

/4"
/8"
1
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3"

52
52
62
74
90
100
115
136
184
210

0.50
0.49
0.73
1.09
1.74
2.44
3.32
5.54
10.90
16.40

Figure number: D14
PN32* BS 5154 SERIES A
Bronze globe valve
Metal disc, Screwed bonnet
Female threaded ends to BS 21 or NPT

/4"
/8"
1
/2"
3
/4"
1"
11/4"
11/2"
2
21/2"
3"

52
52
62
74
90
100
115
136
166
190

0.39
0.38
0.54
0.65
0.90
1.58
2.06
3.31
5.90
10.30

/4"
/8"
1
/2"
3
/4"
1"
11/4"
11/2"
2
21/2"
3"

52
52
62
74
90
100
115
136
166
190

0.40
0.39
0.54
0.65
0.81
1.55
2.01
3.08
6.10
10.50

/4"
/8"
1
/2"
3
/4"
1
11/4"
11/2"
2

52
52
62
74
90
100
115
136

0.33
0.31
0.80
1.24
1.50
1.70
2.16
3.67

Figure number: D46
PN40 BS 5154 SERIES A
Bronze globe valve
Renewable disc, Union bonnet
Stainless steel seat and disc
Female threaded ends to BS 21 or NPT

/4"
/8"
1
/2"
3
/4"
1"
11/4"
11/2"
2"

59
59
68
81
95
108
121
146

0.56
0.55
0.80
1.24
1.82
2.73
3.78
6.03

Figure number: D52
PN64 Bronze globe valve
Renewable disc, Union bonnet
Stainless steel seat and disc
Female threaded ends to BS 21 or NPT

/2"
/4"
1"
11/4"
11/2"
2"

75
89
105
121
133
162

1.00
1.51
2.25
3.59
5.05
8.50

*21/2" & 3" rated PN25

Figure number: D15
PN32* BS 5154 SERIES B
Bronze globe valve
Renewable disc, Screwed bonnet
Female threaded ends to BS 21 or NPT
1
/4" to 3” BS 21 versions kitemarked
*21/2" & 3" rated PN25

Figure number: D16
PN32* BS 5154 SERIES A
Bronze globe valve
Renewable disc, Screwed bonnet
Stainless steel seat and disc
Female threaded ends to BS 21 or NPT
*21/2" & 3" rated PN25

12

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

1
3

1
3

1
3

1
3

1
3

1
3

1
3

GLOBE VALVES

Bronze (Threaded)
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

/8"
/4"
/8"
1
/2"
3
/4"

29
39
45
51
58

0.13
0.15
0.21
0.29
0.46

/8"
/4"
/8"
1
/2"
3
/4"

-

0.13
0.15
0.21
0.29
0.46

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: DM6
PN16 BS 5154 SERIES B
Bronze globe valve
Renewable disc, Screwed bonnet
Flanged ends to BS EN 1092-3

15mm
20mm
25mm
32mm
40mm
50mm

80
90
100
110
120
135

1.24
1.76
2.30
2.82
5.22
5.71

Figure number: DM11
PN25 BS 5154 SERIES B
Bronze globe valve
Renewable disc, Union bonnet*
Flanged ends to BS EN 1092-3

15mm
20mm
25mm
32mm
40mm
50mm
65mm
80mm

108
117
127
146
159
190
216
254

1.71
2.18
3.29
4.93
6.28
9.74
16.20
21.60

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D10
Class 150 BS 5154 SERIES B
Bronze globe valve
Renewable disc, Union bonnet*
Flanged ends to ANSI 150

/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"

108
117
127
146
159
190
216
254

1.76
1.95
3.20
4.54
6.12
8.67
14.90
20.10

Figure number: D71
PN32 BS 5154 SERIES B
Bronze needle globe valve
Straight pattern, Screwed bonnet
Female threaded ends to BS 21 or NPT

1

Figure number: D72
PN32 BS 5154 SERIES B
Bronze needle globe valve
Angle pattern, Screwed bonnet
Female threaded ends to BS 21 or NPT

1

1
3

1
3

Bronze (Flanged - Metric)
DIAGRAM

*sizes 65mm & 80mm Bolted bonnet

Bronze (Flanged - ANSI)
DIAGRAM

*sizes 21/2" & 3" Bolted bonnet

1
3

CRANE FLUID SYSTEMS

13

GLOBE VALVES

Cast Iron (Flanged)
Diagram

Description

Size

Face to Face
(mm)

Weight
(Kg)

Figure number: FM369
PN16 Cast Iron globe valve to BSEN 13789
Bronze trim, Outside screw and yoke
Flanged ends to BSEN 1092-2 PN16

50mm
65mm
80mm
100mm
125mm
150mm

203
216
241
292
330
356

24.2
29.0
36.9
56.0
72.3
98.8

Figure number: F372
Class 125 Cast Iron globe valve to BS 5152
Bronze trim, Outside screw and yoke
Flanged ends to ANSI 125

2"
21/2"
3"
4"
5"
6"

203
216
241
292
330
356

23.1
27.2
34.5
54.4
70.8
95.3

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F254
PN64 Malleable Iron globe valve
Renewable disc, Screwed bonnet
Stainless steel seat, Nickel alloy disc
Female threaded ends NPT

/2"
/4"
1"
11/4"
11/2"
2"

71
84
99
112
125
152

0.74
1.14
1.71
2.67
3.63
5.74

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Malleable Iron (Threaded)
DIAGRAM

1
3

Cast Steel
DIAGRAM

14

Figure number: 143XU
Class 150 Carbon Steel Globe Valve to BS 1873
Outside screw and yoke
Bolted bonnet
Carbon Steel to ASTM 216 Grade WCB

2"
21/2"
3"
4"
6"
8"
10"
12"

203
216
241
292
419
495
622
699

24
32
41
65
112
178
275
409

Figure number: 151XU
Class 300 Carbon Steel Globe Valve to BS 1873
Outside screw and yoke
Bolted Bonnet
Carbon Steel to ASTM 216 Grade WCB

2"
21/2"
3"
4"
6"
8"
10"
12"

267
292
318
356
445
559
622
711

34
45
60
95
200
315
458
500

Figure number: 171XU
Class 600 Cast Steel Globe Valve to BS 1873
Outside screw and yoke
Bolted Bonnet
Carbon Steel to ASTM 216 Grade WCB

2"
21/2"
3"
4"
6"
8"

292
330
356
432
559
660

40
57
73
123
250
454

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

CHECK VALVES

Bronze
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D138
PN25 BS 5154 SERIES B
Bronze swing check valve
Metal disk, screwed cap
Kitemarked to BS 5154
Female threaded ends to BS 21 or NPT

/8"
/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"

48
58
66
80
89
95
108
155
190

0.19
0.32
0.43
0.61
1.01
1.34
2.12
4.08
5.76

Figure number: D140
PN25 BS 5154 SERIES B
Bronze swing check valve
Resilient disk, screwed cap
Kitemarked to BS 5154
Female threaded ends to BS 21 or NPT

/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"

58
66
80
89
95
108
153
188

0.33
0.43
0.63
1.01
1.34
2.12
4.20
6.02

Figure number: D104
PN20 BS 5154 SERIES B
Bronze lift check valve
Metal disk, screwed cap
Female threaded ends to BS 21 or NPT

/2"
/4"
1"
11/4"
11/2"
2"

55
63
77
91
98
118

0.24
0.35
0.60
0.97
1.26
2.09

Figure number: D116
PN32 BS 5154 SERIES B
Bronze lift check valve
Renewable disc, Union cap
Female threaded ends to BS 21 or NPT

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3"

59
59
68
81
95
108
121
146
184
210

0.37
0.36
0.51
0.85
1.32
1.97
2.65
4.44
9.00
13.60

Figure number: D142
PN32 BS 5154 SERIES A
Bronze swing check valve
Regrindable disc, screwed cap
Female threaded ends to BS 21 or NPT

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3"

54
54
62
76
94
110
126
152
186
218

0.26
0.25
0.39
0.62
1.07
1.65
2.56
4.05
6.40
9.30

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F201
PN64 Malleable Iron swing check valve
Regrindable disc and seat, screwed cap
Female threaded ends NPT

/2"
/4"
1"
11/4"
11/2"
2"

70.1
83.3
102.9
120.4
137.2
168.1

0.43
0.65
1.11
1.30
2.61
4.51

3
1
3

1
3

1
3

1
3
1

1
3
1

Malleable Iron
DIAGRAM

1
3

CRANE FLUID SYSTEMS

15

CHECK VALVES

Cast Iron
DIAGRAM

NEW

NEW

16

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: FM450
PN16 Cast Iron wafer check valve
Bronze trim
Fits between BSEN 1092-2 PN10/16 flanges
BS 10 Table D or E and ANSI 125 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

43
46
49
56
64
70
71
76
83

1.3
1.8
2.6
4.7
7.0
9.8
15.0
20.0
30.0

Figure number: FM451
PN16 Cast Iron wafer check valve
Bronze trim, Resilient seated
Fits between BSEN 1092-2 PN10/16 flanges
BS 10 Table D or E and ANSI 125 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

43
46
49
56
64
70
71
76
83

1.3
1.8
2.6
4.7
7.0
9.8
15.0
20.0
30.0

Figure number: FM453
PN16 Cast Iron Double door wafer check valve
to BS EN 12334
Suitable for fitting between flanges confoming to
BS EN 1092-2 PN16 BS10 Tabled or E and ANSI 125
flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm
350mm
400mm
450mm
500mm
600mm

54
54
57
64
70
76
95
108
143
184
191
203
213
222

1.8
2.4
3.2
4.8
7.3
10.1
14.2
23.6
37.6
60
77
99
115
231.5

Figure number: FM455
PN25 Cast Iron Double door wafer check valve
to BS EN 12334
Stainless steel disc, EPDM seat
Suitable for fitting between flanges conforming
to BSEN 1092-2 PN25

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

54
54
57
64
70
76
95
108
143

2.5
3.5
4.5
8.0
10.0
13.0
28.0
45.0
68.0

Figure number: FM469
PN16 Cast Iron swing check valve
to BSEN 12334
Bronze trim, Resilient seated
Flanged ends to BSEN 1092-2 PN16

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

203
216
241
292
330
356
495
622
698

11.3
15.6
19.3
26.6
44.0
55.5
119.0
175.0
263.0

Figure number: FM492
PN16 Cast Iron swing check valve
to BSEN 12334
Bronze trim
Flanged ends to BSEN 1092-2 PN16

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

203
216
241
292
330
356
495
622
698

11.3
15.6
19.3
26.6
44.0
55.5
119.0
175.0
263.0

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

CHECK VALVES

Cast Iron
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F491
Class 100 Cast Iron swing check valve
to BS 4090
Bronze trim
Flanged to BS 10 table D or E

2"
21/2"
3"
4"
5"
6"
8"

203
216
241
292
330
356
495

11.3
15.6
19.3
26.6
44.0
55.5
119.0

Figure number: F493
Class 125 Cast Iron swing check valve
to BS 5153
Bronze trim
Flanged to ANSI 125

2"
21/2"
3"
4"
5"
6"
8"
10"
12"

203
216
241
292
330
356
495
622
698

11.3
15.6
19.3
26.6
44.0
55.5
119.0
175.0
263.0

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: 147XU
Class 150 Carbon Steel Check Valve to BS 1868
Swing check valve, Bolted cap
Carbon Steel to ASTM 216 Grade WCB

2"
21/2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"

203
216
241
292
356
495
622
699
787
864
978
978
1295

15
26
27
42
75
125
200
309
432
557
773
841
1318

Figure number: 159XU
Class 300 Carbon Steel Check Valve to BS 1868
Swing check valve, Bolted cap
Carbon Steel to ASTM 216 Grade WCB

2"
21/2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"

267
292
318
356
445
533
622
711
838
864
978
1118
1346

21
30
39
70
126
191
291
455
705
773
1000
1273
1660

Figure number: 175XU
Class 600 Cast Steel Swing Check Valve to
BS 1868, Bolted cap
Carbon Steel to ASTM 216 Grade WCB

2"
21/2"
3"
4"
6"
8"
10"
12"

292
330
356
432
559
660
787
838

28
38
52
87
225
354
635
794

Cast Steel
DIAGRAM

CRANE FLUID SYSTEMS

17

BALL VALVES

DZR
DIAGRAM

NEW

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D171A
PN25 DZR ball valve, lever operated
PTFE seats and stem seal
Female threaded ends to BSEN 10226 Taper
or ANSI B1.20.1
WRAS Listed

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"

45.3
45.3
58.5
67
80.5
94.5
102.5
122.5

0.15
0.14
0.21
0.30
0.51
0.89
1.29
2.24

15mm
22mm
28mm
35mm
42mm
54mm

66.5
80
92.5
104.5
122
141

0.21
0.37
0.61
1.00
1.55
2.54

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D191
PN25 Brass ball valve, lever operated
PTFE seats and stem seal
Female threaded ends to BSEN 10226 Taper
or NPT
1
/4"-2" British Gas certified

/4"
/8"
1
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3"
4"

48
48
56
67
77
92
103
122
153
179
212

0.13
0.13
0.25
0.35
0.59
0.89
1.34
2.04
3.96
5.89
9.35

Extension stems, Lockshields or T-handles
can be fitted to Crane ball valves on request

NEW

Figure number: D171AC
PN16 DZR ball valve, lever operated
PTFE seats and stem seal
Compression ends to BS EN 1254-2
WRAS Listed

1
3
1

Extension stems, Lockshields or T-handles
can be fitted to Crane ball valves on request

Brass
DIAGRAM

Extension stems, Lockshields or T-handles
can be fitted to Crane ball valves on request

18

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

1
3

BALL VALVES

Bronze
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D171
PN25 Bronze ball valve, lever operated
PTFE seats and stem seal
Female threaded ends to BSEN 10226 Taper
or NPT
WRAS listed

/4"
/8"
/2"
3
/4"
1"
11/4"
11/2"
2"
21/2"
3"

46
46
57
67
77
91
103
122
153
179

0.15
0.15
0.22
0.45
0.69
1.12
1.67
2.93
4.98
8.75

15mm
22mm
28mm
35mm
42mm
54mm

80
84
95
111
124
149

0.27
0.51
0.78
1.19
1.82
3.28

/2"
/4"
1"

104
124
147

0.27
0.55
0.88

/2"
/4"
1"

104
124
147

0.31
0.58
0.90

Extension stems, Lockshields or T-handles
can be fitted to Crane ball valves on request

Figure number: D171C
PN16 Bronze ball valve, lever operated
PTFE seats and stem seal
Compression ends
WRAS listed

1
3
1

Extension stems, Lockshields or T-handles
can be fitted to Crane ball valves on request

Figure number: D171MHU
PN25 Bronze ball valve, Lever operated
Male x hose union outlet
WRAS listed
Male threaded ends to BSEN 10226 Taper

Figure number: D171MHULS
PN25 Bronze ball valve, Lockshield operated
Male x hose union outlet
WRAS listed
Male threaded ends to BSEN 10226 Taper

1
3

1
3

CRANE FLUID SYSTEMS

19

BUTTERFLY VALVES

Nitrile Liner
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F611
PN16 Semi Lugged Butterfly valve
to EN 593
Aluminium Bronze disc, Nitrile liner
-10 to 90 Deg C
Lever operated (lockable)
Fits between BSEN 1092-2 PN10/16 flanges
and ANSI 125 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm

44
48
48
54
57
57
63

3
4
5
7
8
9
15

Figure number: F612
PN16 Semi Lugged Butterfly valve
to EN 593
Aluminium Bronze disc, Nitrile liner
-10 to 90 Deg C
Gearbox operated
Fits between BSEN 1092-2 PN10/16 flanges
sizes 350mm to 600mm PN16 only
sizes 50-300mm fit between
ANSI 125 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm
350mm
400mm
450mm
500mm
600mm

44
48
48
54
57
57
63
70
79
79
89
108
113
156

7
8
9
10
17
18
25
31
44
60
93
112
156
251

Figure number: F614
PN16 Fully Lugged Butterfly valve
to EN 593
Aluminium Bronze disc, Nitrile liner
-10 to 90 Deg C
Lever operated (lockable)
Fits between BSEN 1092-2 PN16 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm

44
48
48
54
57
57
63

3
4
6
12
13
14
22

Figure number: F615
PN16 Fully Lugged Butterfly valve
to EN 593
Aluminium Bronze disc, Nitrile liner
-10 to 90 Deg C
Gearbox operated
Fits between BSEN 1092-2 PN16 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm
350mm
400mm
450mm
500mm
600mm

44
48
48
54
57
57
63
70
79
79
89
108
113
156

7
8
10
16
25
26
34
43
57
88
124
165
225
313

Crane Butterfly valves are also available to suit ANSI 125 end connections. Consult Crane for details.

20

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

BUTTERFLY VALVES

EPDM Liner – WRAS Listed
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F621
PN16 Semi Lugged Butterfly valve to EN593
Aluminium Bronze disc, EPDM liner
(WRAS listed) -10 up to 100 Deg C
Lever operated (lockable)
Fits between BSEN 1092-2 PN6/10/16 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm

43
46
46
52
56
56
60

2.0
2.7
3.3
5.1
6.1
8.8
12.9

Figure number: F622
PN16 Semi Lugged* Butterfly valve to EN593
Aluminium Bronze disc, EPDM liner
WRAS listed to 300mm -10 to 100 Deg C
Gearbox operated
Fits between BSEN 1092-2 PN6/10/16 flanges
sizes 250 & 300mm PN10/16 and
350 to 600mm PN16

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm
350mm
400mm
450mm
500mm
600mm

43
46
46
52
56
56
60
68
78
78
102
114
127
154

3.0
3.7
4.3
5.9
7.1
10.8
14.9
26.4
40.0
73.0
92.0
138.0
179.0
260.0

Figure number: F624
PN16 Fully Lugged Butterfly valve to EN593
Aluminium Bronze disc, EPDM liner
(WRAS listed) -10 to 100 Deg C
Lever operated (Lockable)
Fits between BSEN 1092-2 PN16 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm

43
46
46
52
56
56
60

2.95
3.50
5.00
6.20
9.50
12.00
26.00

Figure number: F625
PN16 Fully Lugged Butterfly valve to EN593
Aluminium Bronze disc, EPDM liner
(WRAS listed up to 300mm) -10 to 100 Deg C
Gearbox operated
Fits between BSEN 1092-2 PN16 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm
350mm
400mm
450mm
500mm
600mm

43
46
46
52
56
56
60
68
78
78
102
114
127
154

3.95
4.50
6.00
7.00
10.50
18.00
35.00
49.00
56.00
85.00
116.00
163.00
203.00
280.00

* sizes 250mm to 600mm are wafer pattern

Crane Butterfly valves are also available to suit ANSI 125 end connections. Consult Crane for details.

CRANE FLUID SYSTEMS

21

BUTTERFLY VALVES

EPDM Liner – High Temperature
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F626
PN16 Semi Lugged Butterfly valve to EN593
Aluminium Bronze disc, EPDM liner
(High temperature) -10 to 130 Deg C
Lever operated (lockable)
Fits between BSEN 1092-2 PN10/16 flanges
and ANSI 125 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm

44
48
48
54
57
57
63

3
4
5
7
8
9
15

Figure number: F627
PN16 Semi Lugged Butterfly valve to EN593
Aluminium Bronze disc, EPDM liner
(High temperature) -10 to 130 Deg C
Gearbox operated
Fits between BSEN 1092-2 PN10/16 flanges
sizes 350-600mm PN16 only
sizes 50-300mm fit between ANSI 125 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm
350mm
400mm
450mm
500mm
600mm

44
48
48
54
57
57
63
70
79
79
89
108
133
156

7
8
9
10
17
18
25
31
44
60
93
112
156
251

Figure number: F628
PN16 Fully Lugged Butterfly valve to EN593
Aluminium Bronze disc, EPDM liner
(High temperature) -10 to 130 Deg C
Lever operated (lockable)
Fits between BSEN 1092-2 PN16 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm

44
48
48
54
57
57
63

3
4
6
12
13
14
22

Figure number: F629
PN16 Fully Lugged Butterfly valve to EN593
Aluminium Bronze disc, EPDM liner
(High temperature) -10 to 130 Deg C
Gearbox operated
Fits between BSEN 1092-2 PN16 flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm
350mm
400mm
450mm
500mm
600mm

44
48
48
54
57
57
63
70
79
79
89
108
113
156

7
8
10
16
25
26
34
43
57
88
124
165
225
313

Crane Butterfly valves are also available to suit ANSI 125 end connections. Consult Crane for details.

22

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

STATIC BALANCING VALVES

Flow Measurement Devices
DIAGRAM

DESCRIPTION

FACE TO FACE
(mm)

WEIGHT
(Kg)

57
58
66
72
72
82

0.26
0.31
0.39
0.51
0.52
0.81

/2"

57

0.26

20mm
25mm
32mm
40mm
50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm*

18
18
18
18
18
18
18
18
18
18
18
18
18

0.7
0.8
1.0
1.1
1.4
1.5
1.8
2.2
2.6
3.0
4.4
5.7
7.1

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D921 WRAS listed
Bronze double regulating valve to
BS 7350 PN25 (Max temp 120°C)
Threaded Female BSEN 10226 or NPT

/2"
/4"
1"
11/4"
11/2"
2"

87
96
100
114
125
146

0.65
0.72
0.91
1.10
1.44
1.90

/2"

87

0.65

Figure number: DM921
PN16 Ductile Iron double regulating
globe type valve to BS 7350
Flanged to BSEN 1092-2 PN16

65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

290
310
350
400
480
600
730
850

15.8
19.5
28.0
37.5
50.5
123.0
192.0
251.0

Figure number: DM925G
PN16 Cast Iron double regulating fully
lugged butterfly valve to BSEN 593
Al. Bronze disk and EPDM liner
Gearbox operated
Fits between BSEN 1092-2 PN16 Flanges

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

43
46
46
52
56
56
60
68
78

8.6
9.1
11.8
17.2
18.1
19.5
29.5
39.9
54.9

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

43.0
45.0
46.0
51.5
56.0
56.5
60.0
68.5
79.5

10.0
10.8
11.0
13.0
16.0
18.5
29.8
40.0
53.0

Figure number: D901
DZR Flow measurement device to
PN25 (Max temp 120°C)
Threaded Female inlet & Male outlet
BSEN 10226
Size 1/2" includes complimentary copper
to iron adapter
Fitted with two insertion test points
Figure number: D902
As D901 but designed for low flow applications
Figure number: DM900
PN 25 (Max temp 120°C)
Stainless Steel Flow measurement device
Wafer pattern to fit between
BSEN 1092-2 PN10/16 Flanges
Fitted with two insertion test points
* larger sizes available please consult Crane

SIZE
1

/2"
/4"
1"
1
1 /4"
11/2"
2"
3

1

Double Regulating Valves
DIAGRAM

Figure number: D923 WRAS listed
As D921 but designed for low flow
applications

Lever version DM925L
Figure number: DM975G
PN25 Ductile Iron double regulating fully lugged
butterfly valve to BSEN 593
Stainless steel disc and EPDM liner
Gearbox operated
For use with PN25 flanges

1
3

1

CRANE FLUID SYSTEMS

23

STATIC BALANCING VALVES

Motobalance Fixed Orifice Double Regulating Valve
(Commissioning Set)
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

/2"
/4"

87
96

0.41
0.45

/2"

87

0.41

/2"

87

0.41

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D931
PN25 Bronze commissioning set to BS 7350
(Max temp 120°C)
Threaded Female BSEN 10226 or NPT
Fitted with two insertion test points
WRAS listed

/2"
/4"
1"
11/4"
11/2"
2"

87
96
100
114
125
146

0.65
0.72
0.91
1.10
1.44
1.90

/2"

87

0.65

/2"

87

0.65

Figure number: DM941
PN16 Ductile Iron double regulating globe type
valve to BS 7350 (Max temp 120°C)
with integral fixed orifice
Flanged to BSEN 1092-2 PN16
Fitted with two insertion test points
Figure number: DA941
Flanged to ANSI 125

65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

290
310
350
400
480
600
730
850

16.3
20.0
28.5
38.0
51.0
124.0
194.0
254.0

Figure number: DM950G
PN16 Cast Iron butterfly valve
commissioning set
Al. Bronze disk and EPDM liner
(Max temp 120°C)
Double regulating gearbox operated
Flanged to BSEN 1092-2 PN16

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm
350mm
400mm

158
161
171
181
190
232
287
345
404
451
511

19.7
20.8
23.4
32.5
38.4
47.1
67.8
89.2
124.2
166.5
180.0

Figure number: D981P
PN16 Bronze commissioning set
(Max temp 120°C)
Threaded Female BSP or NPT
Fitted with two insertion test points

1

Figure number: D983P
As D981 but designed for low flow
applications

1

Figure number: D984P
As D981 but designed for ultra low flow
applications

1

3

Fixed Orifice Double Regulating Valve
(Commissioning Set)
DIAGRAM

3

Figure number: D933
As D931 but designed for low flow
applications
WRAS listed

1

Figure number: D934
As D931 but designed for ultra low flow
applications
WRAS listed

1

Lever version DM950L

24

1

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

STATIC BALANCING VALVES

Variable Orifice Double Regulating Valve
DIAGRAM

DESCRIPTION
Figure number: DM931
PN16 Ductile Iron variable orifice
double regulating valve to BS 7350
(Max temp 120°C)
Flanged to BSEN 1092-2 PN16
Fitted with two insertion test points
Figure number: DA931 Flanged ANSI 125

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

290
310
350
400
480
600
730
850

15.8
19.5
28.0
37.5
50.5
123.0
192.0
251.0

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

/4"

-

-

/4"

-

-

/4"

-

-

Balancing Valve Accessories
DIAGRAM

DESCRIPTION

P82

Figure number: P82
Insertion test point for MTHW

1

Figure number: P83
Extension tube for use on insulated systems.

1

Figure number: P84
Insertion test point, pack of 10

1

P84

P83

Compression ends D921, D923, D931, D933, D934, D981P, D983P, D984P, when
connecting to copper pipe in accordance with BSEN1057 table 4. (R250 Half Hard Copper).
1/2” (15mm) Kit = Part No 0JG91118S

3/4” (22mm) Kit = Part No 0JG9119T

CRANE FLUID SYSTEMS

25

STRAINERS

Bronze
DIAGRAM

NEW

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: D295
PN25 Bronze Y Type strainer
Stainless steel perforated screen 0.75mm
Stainless steel perforated screen 0.75mm
Female threaded ends to BSEN 10226 or NPT
WRAS Listed

/2"
/4"
1"
11/4"
11/2"
2"

74.5
86.5
108
122
135
163

0.27
0.43
0.79
1.1
1.58
2.55

Figure number: D297
PN32 Bronze Y Type strainer
Stainless steel perforated screen 0.75mm
Female threaded ends to BSEN 10226 or NPT
WRAS Listed

/2"
/4"
1"
11/4"
11/2"
2"

71
86
101
134
148
176

0.38
0.63
0.96
1.81
2.43
4.13

Figure number: D298
PN16 Bronze Y Type strainer
Stainless steel perforated screen 0.75mm
Female threaded ends to BSEN 10226 or NPT
WRAS Listed

/2"
/4"
1"
11/4"
11/2"
2"

58
70
88
96
107
126

0.18
0.29
0.39
0.68
0.93
1.5

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: FM276
PN16 Cast Iron Y Type strainer
Stainless steel perforated screen 1.5mm
Flanged ends to BSEN 1092-2 PN16
Drilled bosses and cap
*Sizes 350 to 600mm available
on request

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

226
290
306
350
399
480
600
686
757

13.0
23.0
30.0
43.0
71.0
93.0
161.0
266.0
397.0

Figure number: F277
ANSI 125 Cast Iron Y Type strainer
Stainless steel perforated screen 1.5mm
Drilled bosses and cap
Flanged ends to ANSI Class 125

2"
21/2"
3"
4"
5"
6"
8"
10"
12"

152
178
191
229
254
279
342
406
483

13
23
30
43
71
93
161
266
397

NEW

1
3

1
3

1
3

Cast Iron
DIAGRAM

*< 300mm = Group 2 gases (including steam)
Group 1 and 2 liquids
> 300mm = Group 1 and 2 liquids only

26

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

STRAINERS

Ductile Iron
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

50mm
65mm
80mm
100mm
125mm
150mm
200mm
250mm
300mm

230
273
295
352
416
470
543
660
770

12.0
25.0
33.0
43.0
73.0
97.0
164.0
270.0
400.0

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

Figure number: F273
PN64 Malleable Iron Y Type strainer
Stainless steel perforated screen 0.75mm
Female threaded ends to BSEN 10226

/2"
/4"
1"
11/4"
11/2"
2"

74
89
104
137
150
178

0.37
0.54
0.92
1.55
2.22
4.17

Figure number: FM278
PN25 Ductile Iron Y Type strainer
Stainless steel perforated screen 1.6mm
Flanged ends to BSEN 1092-2 PN25

Malleable Iron
DIAGRAM

1
3

*< 300mm = Group 2 gases (including steam)
Group 1 and 2 liquids
> 300mm = Group 1 and 2 liquids only

CRANE FLUID SYSTEMS

27

RADIATOR VALVES

TRV & Wheel Head Connected to Common Valve Body.
Chrome Plated Finish
DIAGRAM

28

DESCRIPTION

SIZE

WEIGHT
(Kg)

Figure number: D885
PN10 Angle pattern TRV and Wheel Head valve body

15mm
22mm

-

Figure number: D886
PN10 Straight pattern TRV and Wheel Head valve body

15mm
22mm

-

Figure number: T80
Wheel Head

-

-

Figure number: T90
TRV Head

-

-

D885 Angle Body and T90 TRV Head

15mm
22mm

0.350
0.519

D886 Straight Body and T90 TRV Head

15mm
22mm

0.391
0.580

D885 Angle Body and T80 Wheel Head

15mm
22mm

0.350
0.519

D886 Straight Body and T80 Wheel Head

15mm
22mm

0.391
0.580

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

RADIATOR VALVES

Lockshield Valves. Chrome Plated Finish
DIAGRAM

DESCRIPTION

SIZE

WEIGHT
(Kg)

Figure number: D887
PN10 Angle pattern Lockshield valve

15mm
22mm

0.232
0.387

Figure number: D888
PN10 Straight pattern Lockshield valve

15mm
22mm

0.273
0.455

SIZE

WEIGHT
(Kg)

Figure number: D889 RS2
Remote sensing TRV sensor

2m

-

Figure number: D889 RS8
Remote sensing TRV sensor

8m

-

Figure number: D889 RT2
Remote adjusting TRV transmitter

2m

-

Figure number: D889 RT8
Remote adjusting TRV transmitter

8m

-

DESCRIPTION

SIZE

WEIGHT
(Kg)

Figure number: T70
Nut and olive

15mm
22mm

-

Figure number: T95
90o Elbow

-

-

Figure number: T100
Tamper proof ring

-

-

Sensors & Transmitters
DIAGRAM

DESCRIPTION

Accessories
DIAGRAM

CRANE FLUID SYSTEMS

29

DRAIN COCKS

Drain Cocks
DIAGRAM

DESCRIPTION

SIZE

FACE TO FACE
(mm)

WEIGHT
(Kg)

/2"
/4"
1"

-

0.13
0.35
0.59

/2"
/4"
1"

-

0.12
0.34
0.58

Figure number: D344
PN10 Bronze Draw off cock taper plug type
Gland sealed
Threaded Female BS 21 Taper

/2"
/4"
1"
11/4"
11/2"
2"

114
136
150
170
204
240

0.45
0.70
1.20
2.01
2.61
4.14

Figure number: D344.1/2
PN10 Bronze Draw off cock taper plug type
Gland sealed
Threaded Male BS 21 Taper

/2"
/4"
1"
11/4"
11/2"
2"

125
145
165
185
220
250

0.48
0.73
1.23
2.10
2.75
4.31

/2"
/4"
1"

104
124
147

0.27
0.55
0.88

/2"
/4"
1"

104
124
147

0.31
0.58
0.90

Figure number: D340
PN10 Bronze Drain tap - Lockshield
Threaded Male BS 21 Taper
WRAS listed

1

Figure number: D341
PN10 Bronze Drain tap
Threaded Male BS 21 Taper
WRAS listed

1

Figure number: D171MHU
PN25 Bronze ball valve, Lever operated
Male x hose union outlet
WRAS listed
Male threaded ends to BSEN 10226 Taper
Figure number: D171MHULS
PN25 Bronze ball valve, Lockshield operated
Male x hose union outlet
WRAS listed
Male threaded ends to BSEN 10226 Taper

30

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

3

3

1
3

1
3

1
3

1
3

THERMAL BALANCING VALVES

MultiTherm Automatic Circulation Regulating Valve

DIAGRAM

DESCRIPTION

SIZE

WEIGHT
(Kg)

Figure number: D1880
PN16 Bronze MultiTherm valve
for circuits greater than 10m length

15mm
20mm
25mm

0.70
0.90
1.20

Figure number: D1882
Universal drain valve

-

-

Figure number: D1883
Universal thermometer

-

-

Figure number: D1884
Universal insulation shell

-

-

Figure number: D1885
Universal thermal sensor

-

-

Figure number: D1886
Optional mapress ends

15mm
20mm
25mm

-

Figure number: D1887
Optional mepla ends

15mm
20mm
25mm

-

/2"
/4"
1"

-

-

-

Figure number: D1888
Optional male bsp
Figure number: D1889
Copper tails

1
3

EtaTherm Automatic Circulation Regulating Valve

DIAGRAM

DESCRIPTION

SIZE

WEIGHT
(Kg)

Figure Number: D1890
PN16 Bronze valve
for circuits less than 10m length

15mm

0.40

CRANE FLUID SYSTEMS

31

THERMAL BALANCING VALVES

MultiTee Temperature Monitoring Pocket
& Thermometer
DIAGRAM

DESCRIPTION

SIZE

WEIGHT
(Kg)

Figure Number: D1892
PN16 provides system temperature validation

15mm
20mm
25mm

0.30
0.40
0.50

SIZE

WEIGHT
(Kg)

/2"
/4"

0.50
0.60

/2"
/4"

0.65
0.75

Thermostatic Mixing Valves
DIAGRAM

32

DESCRIPTION
Figure Number: D1088
PN16 steelvalve with integral filters and
check valves

1

Figure Number: D1089
PN16 steel valve with additional
isolation ball valves and MX tail pieces

1

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

3

3

COMMPAC

CommPac Manifold
Commissioning System
On large projects, significant time and
cost can be eliminated by enabling
commissioning at convenient locations.
Ends of corridors, or accessible cupboards
can be used, which would also eliminate
disruption to occupiers during
maintenance works.
The CommPac is an exceptionally efficient, practical and versatile system:• Up to six terminals can be served from a single
CommPac unit.

• Fan coil units can be flushed, vented and balanced
without the time-consuming ‘looping out’ procedure.
This can be carried out by one commissioning
engineer instead of a team.

• All units are custom built to suit site specification.
• All site connections can be made without the need to
access the internal components.
• CommPac is suitable for variable flow or constant flow
systems.
• All connections are BSPT Female, enabling standard pipe
or specialist adapters to be used.

Dimensions & Weights

• A single strainer serves all circuits, eliminating the
need for individual strainers.
• All systems can be flushed through the unique
Dominator ‘H’ body.
• The single DPCV maintains constant differential
pressure between manifolds.

Material Specifications

OUTLETS
& INLETS

LENGH
(mm)

HEIGHT
(mm)

WIDTH
(mm)

WEIGHT
(kg)

PART

MATERIAL

6x6
5x5
4x4
3x3
2x2

1120
1120
880
880
640

250
250
250
250
250

290
290
290
290
290

40
38
36
34
30

H - Body
Strainer
Manifolds
Isolation Valves
Regulation Valves

Bronze (Z3000)
Bronze (D297)
Bronze
DZR Brass (D171A)
Bronze (D931 or D981)

Maximum pressure 16 bar. Temperature rating -10 to 100ºC

CommPac Selection Programme
CommPac modules are built to suit individual project design
requirements. Correct selection of balancing valves and
differential pressure control valves is essential to ensure
comfort control and
system efficiency. Flow
rates, Pipe sizes, Pipe
materials, and Pipe
losses all have to be
calculated to ensure
that each CommPac
module contains the
correct combination of
products to achieve
the best results.

To streamline this selection process we have developed
software that allows all variables to be considered and
best valve options selected. The selection programme is
used by Crane Sales/Technical staff to input customer
information throughout the design
process and ensure that the
optimum design is achieved.
The outputs from the selection
software are used by Consultants,
Contractors, Commissioning
Engineers, and our own Production
team, ensuring consistency
throughout the whole process.

CRANE FLUID SYSTEMS

33

DOMINATOR Z3000

Dominator Z3000
Flow Management System for Fan Coil Units
Threaded BSEN10226 formerly BS21 (ISO 7) for Two Unit System
Specification
The unique bypass valve unit comprises two T-ported ball
valves allowing easy back flushing, forward flushing and
isolation. The position of the T-handle gives clear
indication of flow/bypass mode. Designed around 3/4”
full bore ball for optimum flow, can be adapted to 1/2”,
3/4” and 1” end connections. Simple attachment to
existing hangers. The strainer unit has an integral drain
cock and pressure test point enabling measurement of
pressure drop across load and allowing for flushing of
strainer and coil without need to remove basket.

Application
The Z3000 is a prefabricated unit combining the essential
control components and connecting pipework associated
with fan coils, into one compact, fully assembled unit
ready for simple and fast on-site connection.

The Dominator is compact and lightweight

Benefits for Design Engineers

•
•
•
•

• minimal design involvement
• all the necessary components supplied as one tested
unit
• no risk of a component being omitted from a system at
installation
• known performance of the entire unit
• saves time, reduces specification risks and provides
maximum value to the client

The complete unit is factory tested
Integrated union joints allow for custom alignment
80mm supply/return centres allow for ease of lagging
Ease of installation

The unique bypass valve unit comprising two
T-ported ball valves
• Allows easy back flushing, forward flushing and isolation
• The position of the T-handle gives clear indication of
flow/bypass mode
• Designed around 3/4” full bore ball for optimum flow
• Can be adapted to 1/2”, 3/4” and 1” end connections
• Simple attachment to existing hangers

ITEM DESCRIPTION

MATERIAL

1

Bypass Valve

The strainer unit has an integral drain cock
and pressure test point

Bronze to BSEN 1982
CC491K

2

ProBalance valve (D931)

Refer to ProBalance literature

3

D297 strainer

• Enabling measurement of pressure drop across load
• Allowing for flushing of strainer and coil without need
to remove basket

Bronze to BSEN 1982
CC491K

4

Union

Brass to BSEN 12165
CW617N

5

P84 test point

DZR to BSEN 12164
CW602N

Benefits for Installing Contractors

6

Drain cock

DZR to BSEN 12164 CW602N

• significant reduction in site labour and nstallation costs
• fast connection of one complete assembly
• standardised components with guaranteed tested
performance
• less purchase orders, minimal administration
• simple on-site connection

34

Dimensions & Weights

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

Pressure/temperature ratings
TEMPERATURE ºC
PRESSURE (BAR)

-10 TO 100
16.0

Maximum temperature 120ºc

110
160.0

120
16.0

DOMINATOR Z3000

The Dominator range comprises two series:
• Z3000 series features the Crane ProBalance Fixed
Orifice Double Regulating valve D931.
• Z3900 series features the Crane MotoBalance Fixed
Orifice Double Regulating valve D981P, suitable for
use with actuator.

Both series provide versions for heated and chilled water
systems and combinations with and without drains and
strainers.The versions for chilled water systems include
extension stems (EXS) on the ball valve T-handles to
allow for lagging. The Z3000 series also includes low flow
and ultra low flow versions.

Z3000 Series comprises the three variants as shown below.

Z3000 with ProBalance
includes drain and strainer

Z3010 with ProBalance
without drain and strainer

Z3020 with ProBalance
including drain but without strainer

This series utilises the Crane ProBalance Valves D931, D933 or D934 depending on flow rate required.
All selections are made by Crane and each unit is tagged with individual fan coil ref nos to assist contractors with site
assembly. Extension stems are fitted to isolation ball valves for chilled water services.

Z3900 Series comprises the three variants as shown below.

Z3000 with MotoBalance
includes drain and strainer

Z3910 with MotoBalance
without drain and strainer

Z3920 with MotoBalance
including drain but without strainer

This series utilises the Crane MotoBalance Valves D981P, D983P or D984P depending on flow rate required.
The MotoBalance offers on/off or modulating control with equal percentage characteristics.
All selections are made by Crane and each unit is tagged with individual fan coil ref nos to assist contractors with site
assembly. Extension stems are fitted to isolation ball valves for chilled water services.

CRANE FLUID SYSTEMS

35

Index of Figure Numbers
FIG NO.

36

PAGE

FIG NO.

PAGE

D10

13

D185AT

7

DM11

13

F629

22

D104

15

D191

18

DM160

8

F84

10

D1088

32

D201

27

DM161

8

FM124

9

D1089

32

D202

27

DM6

13

FM125

9

D116

15

D203

27

DM900

23

FM276

26

D138

15

D235

7

DM921

23

FM278

27

D14

12

D237

6

DM925G

23

FM369

14

D140

15

D237A

6

DM975G

23

FM450

16

D142

15

D255C

6

DM931

25

FM451

16

D15

12

D295

26

DM941

24

FM453

16

D151

6

D297

26

DM950G

24

FM455

16

D151A

6

D298

26

DM960

24

FM469

16

D151X

7

D340

30

F174

10

FM492

16

D155C

6

D341

30

F179

10

FM52

9

D156

8

D344

30

F182

10

FM57

9

D159

7

D344.1/2

30

F183

11

FM63

9

D16

12

D4

12

F201

15

FM82

10

D160

8

D46

12

F254

14

P82

25

D161

8

D52

12

F273

27

P83

25

D162

8

D7

12

F277

26

P84

25

D166

7

D71

13

F372

14

T70

29

D171

19

D72

13

F491

17

T80

28

D171A

18

D885

28

F493

17

T90

28

D171AC

18

D886

28

F52

9

T95

29

D171C

19

D887

29

F53

9

T100

25

D171MHU

19/30

D888

29

F54

9

47XU-F

11

D171MHULS

19/30

D889

29

F58

10

33XU-F

11

D180

7

D901

23

F59

10

76XU-F

11

D1880

31

D902

23

F611

20

143XU

14

D1882

31

D921

23

F612

20

151XU

14

D1883

31

D923

23

F614

20

171XU

14

D1884

31

D931

24

F615

20

147XU

17

D1885

31

D933

24

F621

21

159XU

17

D1886

31

D934

24

F622

21

175XU

17

D1887

31

D981P

24

F624

21

Dominator

34

D1888

31

D983P

24

F625

21

CommPac

33

D1889

31

D984P

24

F626

22

D1890

31

DA931

24

F627

22

D1892

32

DA941

24

F628

22

FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM

FIG NO.

PAGE

FIG NO.

PAGE

Pipe Fittings Summary
Hexagon Bush

Hexagon Nipple

Hexagon Nipple
Reducing

Beaded Plug Solid

Plain Plug Hollow

140*

144*

145*

146

147

Plain Plug Solid

Countersunk Plug

Backnut Parallel
Thread to BS 2779

Elbow

M & F Elbow

148*

149*

150*

151*

152*

45˚ Elbow

45˚ M & F Elbow

Tee

M & F Tee

Cross

155

156

161*

163

171*

Socket Parallel
Thread to BS 2779

Socket Taper Thread

Socket Reducing

Eccentric Socket

Cap

176*

177

179*

180

185*

Male Bend

M & F Bend

Bend

Twin Elbow

Pitcher Tee

191

192

193

197

199

Return Bend

Round Flange

Union Flat Seat

Union Spherical Seat
Iron to Iron

M & F Union Spherical
Seat Iron to Iron

213

233

241

256*

257

Elbow Union Spherical
Seat Iron to Iron

M & F Elbow Union
Spherical Seat
Iron to Iron

Union Spherical Seat
Bronze to Iron

M & F Union Spherical
Seat Bronze to Iron

Elbow Union Spherical
Seat Bronze to Iron

261

262

271

272

276

M & F Elbow Union
Spherical Seat
Bronze to Iron

Union Spherical Seat
Bronze to Bronze

Union Self Aligning
(SA)

*Available in Bronze

277

289

290

CRANE FLUID SYSTEMS TOTAL PRODUCT CATALOGUE

37

TELEPHONE: +44 (0)1473 277300
FAX: +44 (0)1473 277301
EMAIL: enquiries@cranefs.com
www.cranefs.com

www.cranebsu.com

FM311
ISO 9001

The Company reserve the right to amend any product without notice.

CFS_TPC_06_2009

CRANE HOUSE, EPSILON TERRACE
WEST ROAD, IPSWICH
SUFFOLK IP3 9FJ
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23
Create Date                     : 2009:07:20 10:24:09Z
Creator Tool                    : QuarkXPress(R) 7.31
Modify Date                     : 2009:10:13 10:53:21+01:00
Metadata Date                   : 2009:10:13 10:53:21+01:00
Producer                        : QuarkXPress(R) 7.31
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Format                          : application/pdf
Title                           : Layout 1
Document ID                     : uuid:84f129cc-66be-8443-9c4f-e2dd096762a8
Instance ID                     : uuid:c8385860-a2ae-f546-8e01-52bad3264506
Has XFA                         : No
Page Count                      : 40
Creator                         : QuarkXPress(R) 7.31
EXIF Metadata provided by EXIF.tools

Navigation menu