D 6800 D6800en
User Manual: D 6800
Open the PDF directly: View PDF 
.
Page Count: 16
D6800E 03.2016
High performance drive for installation in robots and machines.
For example their slim design allows the smallest of drill spacings when applying a multi-spindle technique, such as for
the construction of windows.
The robust steel housing guarantees high precision and operational safety.
All air motors can also be used without lubrication.
drilling motors - milling motors - grinding motors
Screwdriving technology
Automation
Air motors
Air tools
Air vane motors for special applications
drilling motors 80 - 600 W
milling motor 400 W
grinding motors 150 - 1000 W
robust and precise bearing
high running accuracy
high precision drill chucks and collets
2
80 W drilling motors with collet / 170 W drilling motors with collet or drill chuck
Motor size 1 right rotation
Series 104- Type 104-010-1 104-110-1 104-210-1 104-310-1
with collet Part no 302929A 302929B 302929C 302929D
Nominal-Power W / HP 80 / 0.11 80 / 0.11 80 / 0.11 80 / 0.11
Nominal-Speed rpm 11000 3000 950 650
Speed (idling) rpm 22000 6000 1900 1300
Nominal-Torque Nm / in.lbs 0.06 / 0.5 0.22 / 1.9 0.8 / 7 1.2 / 11
Start-Torque min. Nm / in.lbs 0.09 / 0.8 0.33 / 2.9 1.2 / 11 1.8 / 16
Air consumption m3/min / cfm 0.23 / 8 0.23 / 8 0.23 / 8 0.23 / 8
Length L mm / in. 96.5 / 3.76 96.5 / 3.76 105.5 / 4.11 105.5 / 4.11
Weight kg / lbs 0.2 / 0.4 0.2 / 0.4 0.22 / 0.5 0.22 / 0.5
Hose I.D. mm / in. 4 / 5/32 4 / 5/32 4 / 5/32 4 / 5/32
for drilling steel up to Ø mm / in. – 3 / 1/83 / 1/83 / 1/8
for drilling aluminium up to Ø mm / in. 3 / 1/83 / 1/83 / 1/83 / 1/8
Performance data relate to an air pressure of 6 bar (85 PSI) and lubricated air. With oil-free operation the output will be reduced by 10 - 20%. Motor housing made from stainless steel.
Spindle and collet regular steel.
Motor size 2 right rotation
Series 104- Type 104-020-1 104-120-1 104-220-1 104-320-1 104-420-1 104-520-1
with collet Part no. 302916A 302916B 302916C 302916D 302916E 302916F
Series 104- Type – 104-120 104-220 104-320 104-420 104-520
for drill chuck Part no. – 302912B 302912C 302912D 302912E 302912F
Nominal-Power W / HP 170 / 0.23 170 / 0.23 170 / 0.23 170 / 0.23 170 / 0.23 170 / 0.23
Nominal-Speed rpm 12000 3000 2000 750 500 330
Speed (idling) rpm 24000 6000 4000 1500 1000 660
Nominal-Torque Nm / in.lbs 0.13 /1.1 0.5 / 4.4 0.8 / 7 2.1 / 18 3.2 / 28 4.9 / 43
Start-Torque min. Nm / in.lbs 0.19 / 1.7 0.8 / 7 1.2 / 10 3.2 / 28 4.8 / 42 5 / 44*)
Air consumption m3/min / cfm 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11
Weight kg / lbs 0.38 / 0.84 0.38 / 0.84 0.38 / 0.84 0.43 / 0.95 0.43 / 0.95 0.43 / 0.95
Hose I.D. mm / in. 6 / 1/4 6 / 1/4 6 / 1/4 6 / 1/4 6 / 1/4 6 / 1/4
for drilling steel up to Ø mm / in. – 3 / 1/84 / 5/32 4 / 5/32 4 / 5/32 4 / 5/32
for drilling aluminium up to Ø mm / in. 4 / 5/32 5 / 13/64 6 / 15/64 6 / 15/64 6 / 15/64 6 / 15/64
Performance data relate to an air pressure of 6 bar (85 PSI) and lubricated air. With oil-free operation the output will be reduced by 10 - 20%. *) max admissible torque
External parts regular steel.
Optional Equipment
for Motor size 1 for Motor size 2
Collet Ø 2 mm Part no. 314693 312679
Ø 3 mm Part no. (included in delivery) 312681
Ø 4 mm Part no. 3024741 312684
Ø 5 mm Part no. – 312686
Ø 6 mm – included in delivery
Ø 3/32” (2.35 mm) Part no. 314694 313742
Ø 1/8” (3.175 mm) Part no. 314407 312682
Ø
1/4” (6.35 mm) Part no. – 312689
Gear rim drill chuck
Range 0.5 - 6.5 mm / B 10 Part no. – 804655
Quick change chuck
Range 0 - 6.5 mm / B 10 Part no. – 805986
(not suitable for type 104-020-1)
2 Slide connectors (M8 x 0.75) included in delivery –
Noise level at standard version 95 dB (A) 73 dB (A)
with exhaust air system and exhaust filter 71 dB (A) 74 dB (A)
Exhaust air system Part no. 446354A 302923A
Exhaust filter Part no. integrated in exhaust air system 811091
Maintenance unit with lubricator* Part no. 820454A 820454A
Connection thread G 1/4G 1/4
Maintenance unit without lubricator* Part no. 822408A 822408A
Connection thread G 1/4G 1/4
Replacement part set consisting of
vanes, sealant rings, o-rings and silencers Part no. 446085B 446086B
*) Maintenance unit consists of pressure regulator valve, filter and optionally with or without lubricator
Allowable shaft loading Page 12 Of course you can also purchase individual replacement parts from us.
3
Dimensions in mm
Dimensions in mm
Motor size 1
Series 104-
right rotation
p203439
5.2
Air
connection
Exhaust air
3
ø10
SW9
ø13 e8
50
Chucking range
approx. 26
20
2
3
ø22 e9
M8x0.75
Collet ø 3 mm
(included in delivery)
Exhaust air system with integrated silencer 446354A
(Optional Equipment)
ø 6
ø19
L
6
100
Exhaust air
Exhaust air system 302923A (Optional Equipment)
Corresponding exhaust lter 811091
47
22 14
1/2”
approx. 2 m
1/4”
Collet ø6 mm
(included in delivery)
22
118
121
Chucking range
154
approx. 33
approx. 59
ø30
ø32
approx. 59.5
Spindle with cone for
drill chuck B10 DIN238
Gear rim drill chuck 804655
0.5 - 6.5 mm / B10
(Optional Equipment)
Quick change chuck 805986
0 - 6.5 mm / B10
(Optional Equipment)
ø25 d10
ø12
Motor size 2
Series 104-
right rotation
1/4”
Air connection
Air connection
Chucking range
Chucking range
(Optional Equipment)
(Optional Equipment)
4
250 W / 400 W drilling motors with collet or drill chuck
Motor size 2.5 right rotation
Series 104- Type 104-0250-1 104-1250-1 104-2250-1 104-7250-1 104-3250-1 104-4250-1
with collet Part no. 302897A 302897B 302897C 302897D 302897E 302897F
Series 104- Type 104-0250 104-1250 104-2250 104-7250 104-3250 104-4250
for drill chuck Part no. 302900A 302900B 302900C 302900D 302900E 302900F
Nominal-Power W / HP 250 / 0.33 250 / 0.33 250 / 0.33 250 / 0.33 250 / 0.33 250 / 0.33
Nominal-Speed rpm 8500 2400 1250 700 350 175
Speed (idling) rpm 17000 4800 2500 1400 700 350
Nominal-Torque Nm / in.lbs 0.28 / 2.5 1 / 9 1.9 / 17 3.4 / 30 6.8 / 60 13.6 / 125
Start-Torque min. Nm / in.lbs 0.42 / 3.7 1.5 / 13 2.8 / 25 5.1 / 45 10.2 / 90 20.4 / 180
Air consumption m3/min / cfm 0.35 / 12 0.35 / 12 0.35 / 12 0.35 / 12 0.35 / 12 0.35 / 12
Weight kg / lbs 0.8 / 1.8 0.8 / 1.8 0.8 / 1.8 0.9 / 2 0.9 / 2 0.9 / 2
Hose I.D. mm / in. 6 / 1/46 / 1/46 / 1/46 / 1/46 / 1/46 / 1/4
for drilling steel up to Ø mm / in. – 4 / 5/32 6 / 15/64 8 / 5/16 10 / 25/64 10 / 25/64*)
for drilling aluminium up to Ø mm / in. 6 / 15/64 6 / 15/64 8 / 5/16 10 / 25/64 – –
Motor size 3 right rotation
Series 104- Type 104-030 104-130 104-230 104-730 104-830 104-930
for drill chuck Part no. 302937A 302937B 302937C 302937D 302937E 302937H
Nominal-Power W / HP 400 / 0.54 400 / 0.54 400 / 0.54 400 / 0.54 400 / 0.54 400 / 0.54
Nominal-Speed rpm 8500 2400 1250 700 350 200
Speed (idling) rpm 17000 4800 2500 1400 700 400
Nominal-Torque Nm / in.lbs 0.44 / 3.9 1.6 / 14 3 / 26 5.4 / 48 10.5 / 92.9 19 / 168.2
Start-Torque min. Nm / in.lbs 0.66 / 5.8 2.4 / 21 4.5 / 40 8.1 / 72 15.7 / 138.9 28.5 / 252.2
Air consumption m3/min / cfm 0.42 / 15 0.42 / 15 0.42 / 15 0.42 / 15 0.42 / 15 0.42 / 15
Weight kg / lbs 0.82 / 1.8 0.82 / 1.8 0.82 / 1.8 0.92 / 2 1.3 / 2.86 1.37 / 3
Hose I.D. mm / in. 10 / 3/810 / 3/810 / 3/810 / 3/810 / 3/810 / 3/8
for drilling steel up to Ø mm / in. – 4 / 5/32 6 / 15/64 8 / 5/16 10 / 3/810 / 3/8
for drilling aluminium up to Ø mm / in. 6 / 15/64 6 / 15/64 8 / 5/16 10 / 25/64 10 / 3/812/ 15/32
Air connection and drive shaft regular steel.
*) for stainless steel, air connection
and drive shaft regular steel.
Optional Equipment
for Motor size 2.5 for Motor size 3
type 104-0/1/2/730 type 104-8/930
Flange incl. cylinder-screws Part no. 4445305 4445305 4446105
Bracket incl. cylinder-screws Part no. 4445393 4445393 4446112
Collet Ø 3 mm Part no. 312681 –
Ø 4 mm Part no. 312684 –
Ø 4,5 mm Part no. 312685 –
Ø 5 mm Part no. 312686 –
Ø 6 mm included in delivery –
Ø 1/8” (3.175 mm) Part no. 312682 –
Ø
1/4” (6.35 mm) Part no. 312689 –
Gear rim drill chuck
Range 0.8 - 10 mm / B 12 Part no. 804650 804650
Range 1.5 - 13 mm / B 12 Part no. 804694 804694
Quick change chuck
Range 0.5 - 8 mm / B 12
(not suitable for type 104-0250/104-030) Part no. 805985 805985
Noise level at standard version 75 dB (A) 75 dB (A)
with exhaust air system and exhaust filter 73 dB (A) 73 dB (A)
Exhaust air system Part no. 388378A 388378A
Exhaust filter Part no. 811091 811091
Maintenance unit with lubricator* Part no. 820454A 820455A
Connection thread G 1/4G 1/2
Maintenance unit without lubricator* Part no. 822408A 822409A
Connection thread G 1/4G 1/2
Replacement part set consisting of
vanes, sealant rings, o-rings and silencers Part no. 446087B 446088C
*) Maintenance unit consists of pressure regulator valve, filter and optionally with or without lubricator
Allowable shaft loading Page 12
Of course you can also purchase individual replacement parts from us.
Performance data relate to an air pressure of 6 bar (85 PSI) and lubricated air. With oil-free operation the output will be reduced by 10 - 20%.
Performance data relate to an air pressure of 6 bar (85 PSI) and lubricated air. With oil-free operation the output will be reduced by 10 - 20%.
5
Motor
size
Series 104-
Type
Dimensions of motor, bracket and flange (mm)
A1 A2 A3 B1 B2 B3 C1 C2 C3 C4 C5 C6 D1 D2 D3 D4
2.5
104-0250-1 104-1250-1 104-2250-1 141 64 -
38 34 20 60 50 30 17 5.8 M4 47 45 55 4.5
104-7250-1 104-3250-1 104-4250-1 157 80
104-0250 104-1250 104-2250 141 64 27
104-7250 104-3250 104-4250 157 80
3
104-030 104-130 104-230 152 64 27 38 34 20 60 50 30 17 5.8 M4 47 45 55 4.5
104-730 168 80
104-830 104-930 170 82 30 42 36 24 65 55 34 21 6.8 M5 48 50 60 5.5
Exhaust air system, part no. 388378A
corresponding exhaust lter, part no. 811091
Air connection
Exhaust air
Cone
B12 DIN 238
Collet
(included in delivery)
6 mm
Exhaust air
Air connection
Flange/Bracket
(Optional Equipment)
104-0250-1
to
104-4250-1
104-0250
to
104-4250
104-030
to
104-730
Gear rim
drill chuck 804650
0.8 - 10 mm / B12
Gear rim
drill chuck 804694
1.5 - 13 mm / B12
Quick change
chuck 805985
0.8 - 10 mm / B12
Motor size 2.5
Series 104-
right rotation
Motor size 3
Series 104-
right rotation
C6
G1/4
G1/4
G1/2
1830
62
approx. 2 m
A2
Chucking range
4.5
4.5
30
0
-0.2
D1
D3
D2
6.6
D4
5.5
34
60.5
62.5
32
B3 e8
28
17 A2
Chucking range
A1
B1 d9
0.8
B1 d9
20
30
B1 e8 B1 e8
73.5
42.4
B3 H8
G1/4
M35x0.75
M35x0.75
B3 e8
C6
M35x0.75
0.8
C1
B3 e8
C4
0.8
C5
B3 H8
C2
A3 A1
12 h8
C3
C3
Dimensions in mm p3000771
6
Optional Equipment
for Motor size 6
Series 67-O
Flange incl. cylinder-screws Part no. 4446166
Bracket incl. cylinder-screws Part no. 4446176
Gear rim drill chuck
Range 1 - 13 mm / B 16 Part no. 804652
Quick change chuck
Range 1 - 13 mm / B 16 Part no. 804663
Noise level at standard version 104 dB (A)
with silencer 94 dB (A)
with exhaust air system 76 dB (A)
Silencer – motor operates in one direction:
1 Air connection (right- or left-rotation)
1 Hose-nozzle Part no. 410540 (G 3/8)
1 Silencer Part no. 802671 (G 3/8)
1 Silencer Part no. 802666 (G 1/2)
Silencer – motor is reversible:
2 Air connections (right- and left-rotation)
2 Hose-nozzles Part no. 410540 (G 3/8)
1 Silencer Part no. 802666 (G 1/2)
Silencer system – motor operates in one direction Part no. 440019B
Silencer system – motor is reversible Part no. 440019A
Maintenance unit with lubricator* Part no. 820455A
Connection thread G 1/2
Maintenance unit without lubricator* Part no. 822409A
Connection thread G 1/2
Replacement part set consisting of
vanes, sealant rings, o-rings Part no. 444787A (for motor type 67-016/026/036/046B16)
and silencers Part no. 444787B (for motor type 67-056/066/0661B16)
Performance data relate to an air pressure of 6 bar (85 PSI) and lubricated air. With oil-free operation the output will be reduced by 10 - 20%.
600 W drilling motors made from stainless steel
Motor size 6 reversible
Series 67- Type 67-016B16 67-026B16 67-036B16 67-046B16 67-056B16 67-066B16 67-0661B16
for drill chuck Part no. 445353H 445353B 445353C 445353D 445353E 445353F 445353G
Nominal-Power W / HP 600 / 0.8 600 / 0.8 600 / 0.8 600 / 0.8 600 / 0.8 600 / 0.8 300 / 0.4
Nominal-Speed rpm 1750 1350 850 315 240 150 75
Speed (idling) rpm 3500 2700 1700 630 480 300 150
Nominal-Torque Nm / in.lbs 3.2 / 28 4.2 / 37 6.7 / 59 18 / 159 24 / 212 38 / 336 38 / 336
Start-Torque min. Nm / in.lbs 4.8 / 42 6.4 / 57 10.1 / 89 27 / 239 36 / 319 57 / 504 57 / 504
Air consumption m3/min / cfm 0.85 / 30 0.85 / 30 0.85 / 30 0.85 / 30 0.85 / 30 0.85 / 30 0.55 / 19
Weight kg / lbs 2.1 / 4.6 2.1 / 4.6 2.1 / 4.6 2.2 / 4.8 2.3 / 5.1 2.3 / 5.1 2.3 / 5.1
Hose I.D. mm / in. 12 / 1/212 / 1/212 / 1/212 / 1/212 / 1/212 / 1/212 / 1/2
for drilling steel up to Ø mm / in. 3 / 1/85 / 13/64 8 / 5/16 13 / 33/64 13 / 33/64 13 / 33/64 13 / 33/64
for drilling aluminium up to Ø mm / in. 3 / 1/85 / 13/64 8 / 5/16 13 / 33/64 13 / 33/64 13 / 33/64 13 / 33/64
*) Maintenance unit consists of pressure regulator valve, filter and optionally with or without lubricator.
Our standard maintenance units are not ATEX conform. Please contact us if this is a requirement.
Allowable shaft loading Page 12
Of course you can also purchase individual replacement parts from us.
7
Gear rim drill chuck 804652
1 - 13 mm / B16
(Optional Equipment)
Quick change chuck 804663
1 - 13 mm / B16
(Optional Equipment)
Motor size 6
67-016 B16
to
67-0661 B16
reversible
Cone for drill chuck
B16 DIN238
Air connection
left rotation
Air connection
right rotation
B1 (e8)
B3 (e8)
A2
A4
Chucking range
A3
A1
C4
D2
Exhaust air
D3 D4
D5
D1
C3
86
89.6
ø40.2 ø50
Bracket
(Optional Equipment)
Flange
(Optional Equipment)
E1
E2
F5
F1 (-0.2)
F2
F5
F4
F3
F6
F7
E6
B3 (e8)
E3
E5
E4
F6
Dimensions in mm p440183
Motor
Size
Series 67-
Type
Dimensions of Motor (mm)
A1 A2 A3 A4 B1 B3 C3 C4 D1 D2 D3 D4 D5
6
67-016B16 67-026B16
67-036B16
204 37.5 166 66
56 35 48 M6 G3/8G1/214 11.5 24
67-046B16
222 37.5 184 84
67-056B16 67-066B16
67-0661B16
219 38 180 80
Motor
Size
Dimensions Flange Part no. 4446166 (mm) Dimensions Bracket Part no. 4446176 (mm)
B3 E1 E2 E3 E4 E5 E6 F1 F2 F3 F4 F5 F6 D5
635 7.5 8.5 85 70 6.6 32 40 25 50 6.6 5.5 70 85
8
right rotation
Type 211-43 202-30 203-30EA 203-45EA
Part no. 314740C 315082A 6061173B 6061174B
Nominal-Power W / HP 150 / 0.2 250 / 0.33 300 / 0.4 300 / 0.4
Speed (idling) rpm 47.000 32.000 30.000 45.000
Air consumption (under load) m3/min / cfm 0.23 / 8.1 0.3 / 11 0.45 / 15.9 0.45 / 15.9
Weight kg / lbs 0.36 / 0.8 0.8 / 1.76 0.7 / 1.54 0.7 / 1.54
Hose I.D. mm / in. 6 / 1/46 / 1/46 / 1/46 / 1/4
Aire inlet pipe thread size 1/4” m 1/4” m – –
Max. head-Ø milling insert (high grade steel) mm / in. 6 / 1/410 / 25/64 6 / 1/46 / 1/4
Max. head-Ø grinding insert mm / in. 13 / 33/64 25 / 1 20 / 25/32 20 / 25/32
Max. diameter ot the vane disc mm / in. 15 / 19/32 25 / 1 25 / 1 15 / 19/32
Length of the inlet hose / exhaust hose m / ft. – – 2/1.25 / 6.6/4.1 2/1.25 / 6.6/4.1
Performance data relate to an air pressure of 6 bar (85 PSI) and lubricated air. With oil-free operation the output will be reduced by 10 - 20%.
150 W / 250 W / 300 W grinding motors
Collet Ø 6 mm Part no. 312688 312688 830648 830648
Wrench Part no. 800401 800401 805491 805491
(9 mm) (9 mm) (11 mm) (11 mm)
Wrench Part no. 800402 800402
(10 mm) (10 mm)
Wrench 6/9 Part no. – – 830649 830649
Exhaust air system – –
Exhaust filter – –
Collet Ø 3 mm Part no. 312681 312681 830650 830650
Ø 4 mm Part no. 312684 312684 830702 830702
Ø 5 mm Part no. 312686 312686 830703 830703
Ø 6 mm included in
delivery
included in
delivery
included in
delivery
included in
delivery
Ø 1/8” (3.175 mm) Part no. 312682 312682 830651 830651
Ø 3/16” (4.76 mm) Part no. – – 830652 830652
Ø
1/4” mm (6.35 mm) Part no. 312689 312689 830653 830653
Noise level at
version without exhaust air system 85 dB (A) 71 dB (A) – –
version with exhaust air system and exhaust filter 73 dB (A) 73 dB (A) 78 dB (A) 79 dB (A)
Exhaust air system Part no. 334615H 302923B included in
delivery
included in
delivery
Exhaust filter Part no. 811091 811091 included in
delivery
included in
delivery
Maintenance unit with lubricator* Part no. 820454A 820454A 820454A 820454A
Connection thread G 1/4G 1/4G 1/4G 1/4
Maintenance unit without lubricator* Part no. 822408A 822408A 822408A 822408A
Connection thread G 1/4G 1/4G 1/4G 1/4
Replacement part set consisting of
vanes, sealant rings, o-rings and silencers Part no. 444922A 444921A 440502A 440502A
*) Maintenance unit consists of pressure regulator valve, filter and optionally with or without lubricator
Allowable shaft loading Page 12
Of course you can also purchase individual replacement parts from us.
Optional Equipment
Included in delivery
9
Exhaust air system
302923B
(Optional Equipment)
Corresponding
exhaust lter 811091
Steel housing
without isolation
0
SW11
n0.2
-0.1
SW9
-0.2 Collet
ø 6 mm
Collet ø 6 mm
SW9
Chucking range
Chucking range
ø12.5
ø26h8
ø12
ø28e8
SW 24
SW 24
ø28d11
40
120 38.520
Chucking
range
ø34.5
ø13.5
Exhaust air system
334615H
(Optional Equipment)
Corresponding
exhaust lter 811091
Exhaust hose
length 1.25 m
Air supply hose
length 2 m
Collet ø 6 mm
SW9
Air connection
1/4”
1/2”
Exhaust air
Air connection
1/4”
1/4”
Exhaust air
Type
202-30
right rotation
Type
211-43
right rotation
Chucking range
Exhaust hose
length 2 m
Exhaust hose
length 2 m
Type
203-30EA
203-45EA
right rotation
Dimensions in mm m6077877
Dimensions in mm p203428
10
400 W / 500 W / 700 W / 1000 W milling motors and grinding motors
right rotation
Milling motor Type 27-030 - - -
Grinding motors Type - 205-20EA 207-19EA 210-15EA
Part no. 314925A 6061168B 6061169B 6061172B
Nominal-Power W / HP 400 / 0.54 500 / 0.67 700 / 0.94 1.000 / 1.34
Speed (idling) rpm 20.000 20.000 19.000 15.300
Air consumption (under load) m3/min / cfm 0.38 / 13.4 0.9 / 31.8 0.9 / 31.8 1.0 / 35.3
Weight kg / lbs 0.7 / 1.54 1.2 / 2.64 1.7 / 3.74 1.7 / 3.74
Hose I.D. mm / in. 10 / 25/64 10 / 25/64 10 / 25/64 12 / 15/32
Aire inlet pipe thread size ¼” m – – –
Max. head-Ø milling insert (high grade steel) mm / in. 12 / 15/32 16 / 5/816 / 5/816 / 5/8
Max. head-Ø grinding insert mm / in. 32 / 11/432 / 11/440 / 137/64 50 / 131/32
Max. diameter ot the vane disc mm / in. – 40 / 137/64 40 / 137/64 50 / 131/32
Length of the inlet hose / exhaust hose m / ft. – 2/1 6.56/3.28 2/1 6.56/3.28 2/1 6.56/3.28
Collet Ø 6 mm Part no. 312694 6014315 315018 315018
Wrench Part no. 800403 800402 800405 800405
(12 mm) (10 mm) (17 mm) (17 mm)
Wrench Part no. 800405 800410 800416 800416
(17 mm) (14 mm) (22 mm) (22 mm)
Exhaust air system –
Exhaust filter –
Collet Ø 3 mm Part no. 312690 6014320 6014317 6014317
Ø 4 mm Part no. 312692 6014321 6017743 6017743
Ø 5 mm Part no. 312693 - 6017744 6017744
Ø 6 mm included in
delivery
included in
delivery
included in
delivery
included in
delivery
Ø 7 mm Part no. 312739 – – –
Ø 8 mm Part no. 312696 – 315073 315073
Ø 8 mm (stainless steel) Part no. – – 6014282 6014282
Ø 9 mm Part no. 313137 – 315089 315089
Ø 1/8” (3.175 mm) Part no. 312691 6014320 – –
Ø 3/16” (4.76 mm) Part no. – 6014321 315088 315088
Ø
1/4” (6.35 mm) Part no. 312695 6014314 315074 315074
Ø 5/16” Part no. – – 315090 315090
Noise level at
version without exhaust air system 75 dB (A) – – –
version with exhaust air system and exhaust filter 73 dB(A) 79 dB(A) 79 dB(A) 80 dB(A)
Exhaust air system Part no. 388378A included in
delivery
included in
delivery
included in
delivery
Exhaust filter Part no. 811091 included in
delivery
included in
delivery
included in
delivery
Maintenance unit with lubricator* Part no. 820454A 820455A 820455A 820455A
Connection thread G 1/4G 1/2G 1/2G 1/2
Maintenance unit without lubricator* Part no. 822408A 822409A 822409A 822409A
Connection thread G 1/4G 1/2G 1/2G 1/2
Replacement part set consisting of
vanes, sealant rings, o-rings and silencers Part no. 446088D 440502B 440502C 440502D
*) Maintenance unit consists of pressure regulator valve, filter and optionally with or without lubricator
Allowable shaft loading Page 12
Of course you can also purchase individual replacement parts from us.
Optional Equipment
Included in delivery
Performance data relate to an air pressure of 6 bar (85 PSI) and lubricated air. With oil-free operation the output will be reduced by 10 - 20%.
11
Milling
motor
Type 27-030
right rotation
Type 205-20EA
right rotation
m6077872
p203428
Typ 207-19EA
right rotation
m6077873
Typ 210-15EA
right rotation
m6077876
Air supply hose
length 2 m
Exhaust hose
length 1 m
X
Collet ø 6 mm
with connector nut
Exhaust hose
length 2 m
Air connection
X
1:1
ø39.5 h8
ø19
122
90
ø26 +0.4
+0.1
+0.2
-0.1
10329
6
SW10
SW14
ø14.5
6
Air supply hose
length 2 m
Air supply hose
length 2 m
Exhaust hose
length 1 m
Exhaust hose
length 1 m
Collet ø 6 mm
with connector nut
X
X
X
1:1
ø33.2ø33.2
ø24
ø46.5 h8
37 111 117.5
8
9
SW22
SW17
X
1:1
ø49 h8
36.7 111 134
ø24
8
9
SW22
SW17
Chucking range
ø38e8
Collet ø 6 mm
with connector nut
102
Chucking range
85
Chucking range
Chucking range
+0.2
-0.1
Exhaust air system
388378A
(Optional Equipment)
Corresponding
exhaust lter 811091
Collet ø 6 mm
SW12
Air connection
Exhaust air
Exhaust air
1/4”
1/2”
Dimensions in mm
Dimensions in mm
Dimensions in mm
Dimensions in mm
12
203-30EA / 203-45EA
207-19EA / 210-15EA
205-20EA
Type Part no. Fax Frad a
[N] [N] [mm]
203-30EA 6061173B 20 40
25
203-45EA 6061174B
205-20EA 6061168B 25 50
207-19EA 6061169B 40 90
210-15EA 6061172B 55 120
211-43
314740C
15 30
202-30 315082A
27-030 314925A 25 50
Type Part no. Fax Frad a
[N] [N] [mm]
104-120 302912B
380 35 60
104-220 302912C
104-320 302912D
104-420 302912E
104-520 302912F
104-0250 302900A
750
150
70
104-1250 302900B
104-2250 302900C
104-7250 302900D
104-3250 302900E
104-4250 302900F
104-030 302937A
104-130 302937B
104-230 302937C
104-730 302937D
104-830 302937E 790
104-930 302937H
67-026B16 445353B
1100 80
67-036B16 445353C
67-046B16 445353D
67-016B16 445353H
67-056B16 445353E
265
67-066B16 445353F
67-0661B16 445353G
Type Part no. Fax Frad a
[N] [N] [mm]
104-010-1 302929A
200 75
25
104-110-1 302929B
104-210-1 302929C
104-310-1 302929D
104-020-1 302916A
380 50
104-120-1 302916B
104-220-1 302916C
104-320-1 302916D
104-420-1 302916E
104-520-1 302916F
104-0250-1 302897A
750 220
104-1250-1 302897B
104-2250-1 302897C
104-7250-1 302897D
104-3250-1 302897E
104-4250-1 302897F
Milling motors and Grinding motors
Motors with drill chuck
Motors with collet
Drill chuck
Collet
Maximum allowable load on the drive shaft
13
Cutting
Speed
35 m/min
(115 ft./min)
28 m/min
(90 ft./min)
25 m/min
(80 ft./min)
14 m/min
(45 ft./min)
11 m/min
(35 ft./min)
7 m/min
(23 ft./min)
22 m/min
(70 ft./min)
12 m/min
(40 ft./min)
50 m/min
(165 ft./min)
90 m/min
(300 ft./min)
165 m/min
(540 ft./min)
210 m/min
(690 ft./min)
Carbon steel Alloy steel Stainless Cast-Iron Copper Leightweight-Metal Magnesium-
Drill up to 500 500 - 700 above 700 700 - 900 900 - 1100 steel up to 180 above 180 Bronze common Alloy
2)
dia. N/mm
2
N/mm
2
N/mm
2
N/mm
2
N/mm
2
N/mm
2
N/mm
2
Brass alloy hard
mm/in. (30 (30 - 45 (45 (45 - 55 (55 - 70 (10 (10 mid brass
1)
long tons/ long tons/ long tons/ long tons/ long tons/ long tons/ long tons/
sq. in.) sq. in.) sq. in.) sq. in.) sq. in.) sq. in.) sq. in.)
1 / 0.04
11000 8800 7800 4400 3400 2200 7000 3800 16000 28000 52000 66000
2 /
5
/64
5500 4400 3900 2200 1700 1100 3500 1900 8000 14000 26000 33000
3 /
1
/8
3700 3000 2600 1500 1100 730 2300 1300 5300 9000 17300 22000
4 /
5
/32
2800 2200 2000 1100 850 550 1700 950 4000 7000 13000 16500
5 /
13
/64
2200 1800 1600 880 680 440 1400 760 3200 5600 10400 13200
6 /
15
/64
1900 1500 1300 735 570 365 1200 630 2700 4800 8700 11000
7 /
9
/32
1600 1300 1100 630 485 315 1000 540 2300 4000 7400 9400
8 /
5
/16
1400 1100 975 550 425 275 875 475 2000 3500 6500 8300
9 /
23
/64
1200 975 865 490 380 245 780 420 1800 3100 5800 7400
10 /
25
/64
1100 880 780 440 340 220 700 380 1600 2800 5200 6600
1) Speed for machining of thermoset plastics, laminates and hard laminates, however instead of the HSS-drills we recommend high-speed steel drills made with hard-metal K 10
2) for thermoplastics use approx. double the value
Speed standard values (rpm) for HSS spiral drills
14
Tell us your operational conditions and our application consultants will be happy to help:
Application:
In what kind of environment
will the motor be installed?
ATEX requirement / explosion safety? yes no
if yes, which safety class:
food industry conformity? yes no
sterilisable? yes no
acid resistant? yes no
steam resistant? yes no
constant operation (24 hrs, non-stop) yes no
duty cycle in hrs/day:
days/year:
cycle time (s):
motor loaded to stall? yes no
self-locking? yes no
power: W
nominal torque: Nm
nominal speed: rpm
operating pressure (at motor inlet): bar
operation with lubricated air possible? yes no
smallest opening cross-section of
connection pieces and hoses? mm
left right reversible
(view from air inlet)
standard steel non-corrosive aluminium
plastics ceramics
other:
drive shaft requirements:
(e. g. keyed shafts, square end, hexagonal, collet, drill chuck taper, etc.)
required dimensions:
mounting requirements:
(bracket, flange, etc.)
required dimensions:
holding brake operational brake
gear box:
Application conditions:
Required turn direction:
Motor performance:
Performance influencing
application conditions:
Price range:
Annual requirement:
External motor design:
Drive spindle design:
Motor
fixture design:
Additional components:
15
© DEPRAG. All rights and technical alterations reserved – Fri
CERTIFIED AS PER DIN EN ISO 9001
DEPRAG SCHULZ GMBH u.
CO.
P.O. Box 1352, D-92203 Amberg, Germany
Carl-Schulz-Platz 1, D-92224 Amberg
Phone (+49) 9621 371-0, Fax (+49) 9621 371-120
www.deprag.com
info@deprag.de
