Getting Started With SoCKit Board DE1 So C Guide

• DE1-SoC Getting Started Guide
• Chapter 1 About this Guide
• Chapter 2 Software Installation
  • 2.1 Introduction
  • 2.2 Installing Quartus II software
  • 2.3 Installing Altera SoC Embedded Design Suite
• Chapter 3 Development Board Setup
  • 3.1 Introduction
  • 3.2 Default MSEL Settings
  • 3.3 USB and Power Cables
  • 3.4 Powering up the DE1-SoC Board
• Chapter 4 Performing a FPGA System Test
  • 4.1 Introduction
  • 4.2 Installing the USB-Blaster II Driver
  • 4.3 Downloading a FPGA SRAM Object File
• Chapter 5 Running Linux on the DE1-SoC board
  • 5.1 Introduction
  • 5.2 Creating a microSD Card Image
  • 5.3 Setting Up UART Terminal
  • 5.4 Running Linux on DE1-SoC board
• Chapter 6 Running LXDE on the DE1-SoC board
  • 6.1 Introduction
  • 6.2 Making LXDE Boot SD Card
  • 6.3 LXDE Setting Up Procedures
• Additional Information