Fixed Wireless Business Phone DOBRY Gateway Fwt User Guide

User Manual: DOBRY-wireless-gateway-fwt-user-guide

Open the PDF directly: View PDF PDF.
Page Count: 9

Fixed Wireless Terminal
COPYRIGHT@ SHENZHEN DOBRY TECHOLOGY CO., LTD
1
GSM Fixed Wireless Terminal
User’s Manual
Model: B115 Model: B116
Model: B168 Model:B190
Model: B198
Fixed Wireless Terminal
COPYRIGHT@ SHENZHEN DOBRY TECHOLOGY CO., LTD
2
1, General Description
GSM FWT is a GSM to Analog Converter (single port, insert 1 sim card only), the device can produce a
FXS line to allow a regular phone to be connected and used just like a local landline (PSTN) except your
calls will go out the GSM network.
This device can both receive and make calls. Users can dial the local calls, domestic and international calls
with this Terminal connecting with a common wired desktop phone and a standard SIM card..
It is not a VOIP gateway, nor a GSM+VOIP gateway; It is a GSM Fixed Wireless Terminal that produces a
Analog FXS phone line.
Application areas:
Remote country, Mountains, Dwelling house with weak signals, Public telephone shops
Offices, Removable places such as Ships, Trains, and Long distance buses.
The main applications:
Connect the RJ-11 FXS line to connect Ordinary telephone set for voice call.
Connect PBX for call extension.
Connect billing systems for public phone use.
Connect VoIP gateway to realize VoIP call termination.
Connect alarm system for security purpose. etc.
2, Features:
1) It is a 1 channel GSM Gateway which has 2 RJ-11 outputs for extensions;
2) It can connect with ordinary telephone set, PBX , VOIP Gateway, Billing meter etc. ;
3) Dialing tone frequency:450hz;
4) Employ Industrial module to make;
5) SIM card supported (1.8V, 3V);
6) Caller ID display. Time and date display, the power supply of battery can display at the same time on the
LCD.
7) DTMF Dialing;
8) Bell signal;
9) Polarity reversal;
10) The RJ-11 socket which connect the phone or billing system for metering purpose;
11) Antenna socket (SMA);
12) Working status and Signal Strength by LED indicator;
13) IMEI Change (optional).
14) Supports modem mode.
Fixed Wireless Terminal
COPYRIGHT@ SHENZHEN DOBRY TECHOLOGY CO., LTD
3
15) Automatically connects to IP network when dialing long distance (optional)
16) Dial number Block (Optional)
17) Incoming number Block (Optional)
18) Volume adjustment. Time and date setting.
19) Auto card-locking and net-locking.
20) Back up Li-ion battery (Optional) 7.2V 750mAh.standby 24hrs, talking time: 2hrs.
3, Technical Specifications
1) Networks support:
GSM 900/1800MHz; GSM 850/900/1800/1900MHz
All models support GSM dual band and quad band.
CDMA 800Mhz 2000 1X (optional)
2)Frequency ranges:
A) GSM 850 GSM 1900:
I) Transmission: 869.2 ~ 893.8MHz I) Transmission: 1, 930 ~ 1, 990MHz
Ii) Reception: 824.2 ~ 848.2MHz Ii) Reception: 1, 850 ~ 1, 910MHz
B) GSM 900: GSM 1800:
I) Transmission: 890 ~ 915MHz I) Transmission: 1, 710 ~ 1, 785MHz
Ii) Reception: 935 ~ 960MHz Ii) Reception: 1, 805 ~ 1, 880MHz
C) CDMA800:
I) Transmission: 869 ～894MHz Ii) Reception: 824 ～849MHz
3) Phone interface: supply RJ-11 Phone Interface
4) Hanging voltage: 45V
5) Picking off voltage: 30mA / 41mA
6) Dialing tone Frequency: 450Hz
7) Antenna interface: Antenna amplifying>2.5db
8) Sensitivity:<-104DBM
9) Transmitting power<3W
10) Color: White /Black (optional)
11) AC-Adapter interface: Input: AC 110~240VAC 50~60Hz Output: 5DC 1A.
12) AC-Adapter type: EU,US,AU,British can be optional
13) Stand by hours: 24 Hours
14) Talk time: 2 Hours
15) Charging time: 6 hours
16) Power consumption:
Static≤25MA emission≤500MA
17) Peak power consumption: 0.25W/0.5W
18) Receive sensitivity: -104db
19) Antenna increment: All directions: 5.0db Certain/Selection: 12db
Fixed Wireless Terminal
COPYRIGHT@ SHENZHEN DOBRY TECHOLOGY CO., LTD
4
4, Operation Circumstance:
Operation temperature: -10c~60C
Storage temperature:-20C~70C
Operation humidity:45%-95%
Atmosphere pressure:86-106Kpa
Environment noise: <60DB
Transmitting Power:2W
Sensitivity: <-104dbm
Antenna Amplifying: >2.5db
Dialing frequency: 450Hz
Hanging voltage: 45V
Picking current: 30mA/41mA
5, Packing List
Name
Quantity
Remark
Fwt
1pcs
Dual band or Quad band
Ac- adapter
1pcs
AC-110-240V, DC5V/1A
Antenna
1pcs
Magnetic Antenna with 3m cable
User's Manual
1pcs
English
Device size:
G.W: 0.5kg per set (included adapter, antenna and manual).
20pcs/CTN, 11KG/CTN, CTN Size: 42*38*26cm
6, Installation and Connection
The terminal asks for 110- 220V AV power supply. It must be installed in the area where the GSM network
can cover. The strength of the signal can affect the quality of voice.
1. Screw off the screws that are on the back of the terminal, Insert SIM card for every Sim card holder, and
then tighten the screws.
2. Install antenna. In order to ensure the quality of voice, antenna must be put beyond 1.5M from the
telephone and terminal.
3. Antenna and the terminal can’t be close to the TV set, computer, and radiogram. They would disturb the
signal of the terminal.
4. On end of the telephone line connects to the “Phone” port of the terminal, the other end connects to
telephone.
5. “Power” port connects to power adapter that is connected to 110-220V AC power supply.
1) The Installation for Connecting to Ordinary Telephone
Fixed Wireless Terminal
COPYRIGHT@ SHENZHEN DOBRY TECHOLOGY CO., LTD
5
The Sketch for connecting ordinary Telephone
Draw your attention: Because there are many types of ordinary telephone and their electric parameters are
different. In order to avoid mutual disturbance between telephone and terminal and affect voice quality. The
distance between telephone and terminal is 1.5m at least.
2) The installation for connecting to billing device for metering
If the users demand to register cost during calls, billing device can be connected between terminal and
ordinary telephone. Billing device register cost according to the anti-polarity signal that is provided by
terminal.
The sketch for connecting to Billing device or Computer charging system
3) The installation for connecting to PBX for call extensions
If users want to connect small PBX to this terminal, connect terminal’s “Phone port” to the PBX.
Fixed Wireless Terminal
COPYRIGHT@ SHENZHEN DOBRY TECHOLOGY CO., LTD
6
4) The installation for connecting VoIP gateway for Call Termination
Suppose a VoIP call originates from US, which was transferred from US Server to China Server on VoIP,
finally the call will be terminated from internet to GSM network and to be sent out to the destination answer
side.
The sketch for connecting to VoIP gateway
5) The installation for connecting to alarm system for Security
The GSM FWT can substitute the PSTN for connecting to alarm system for security purpose when PSTN
failure or not available.
The sketch for connecting to alarm system
Fixed Wireless Terminal
COPYRIGHT@ SHENZHEN DOBRY TECHOLOGY CO., LTD
7
7, Function Setting
*00#000# Restore to factory default setting
*00#010# Lock SIM Card automatically
*00#011 # Lock the SIM Card manual (Terminal would offer new PIN code "4321" automatically,
SIM card original PIN Code is "1234")
*00#012# Unlock the SIM Card, PIN code is "1234"
*00#013# Lock the China Mobile Networks
*00#014# Lock the China Unicom Networks
*00#015# Cancel the Networks locking setting
*00#089# change auto card lock into manual car lock.
*00#056#123451234512345# Change IMEI. 15 digitals in EIMI number. 123451234512345 stands of
IMEI number
Dial number Block (Optional Setting)
(Max for 10 groups)
*00#020#AB# The number start with "AB" is blocked
*00#029#XYZ# The number start with "XYZ" is blocked.
For example:
1. number is beginning with 44 (e.g. the numbers are 4400001,44000002 etc.)
2. Take up the phone or press the " Hand free" key.
2. Input "*00#020#44#",then all of the numbers which start with 44 is blocked to dial.
3. Input "*00#020#82#",Start banned dialing group.
Users can also forbid the numbers start with CD, EF, GH etc. 10 groups Max.
Delete this setting:
1 .Take up the phone or press the " Hand free " key.
3. Input " *00#081#" ,all calls are allowed again.
Incoming number Block (Optional Setting)
1 .Take up the phone or press the " Hand free " key.
Input " *00#051#" , block all of the incoming calls.
Fixed Wireless Terminal
COPYRIGHT@ SHENZHEN DOBRY TECHOLOGY CO., LTD
8
Volume Adjustment
1.Take up the phone or press the "Hand free" key.
2. Input "*00#058#3*01#," or "*00#058#9*15 #"
Speak volume adjustment:
the number 01 stand for the Min sound and the number 15 stand for the Max sound.
Earphone volume adjustment:
the number 3 stand for the Min sound and the number 9 stand for the Max sound.
Time and Date Setting
The time and date form is YY/MM/DD/HH/MM (year/month/date/hour/minute ),
1 .Take up the phone or press the "Hand free"key.
2. Input "*00#057#YYMMDDHHMM#" .
Troubleshooting
Trouble
Reasons
Solution
LCD Display 03 ;
LED Display SIM
light;
1 . No signal or
the signal is too
weak;
2. number card
contact is bad;
3.
communication
module is bad;
1 . Check the antenna and
install it again.
2.Replace number card or
wipe contact surface; install
the SIM card again.
3.Replace communication
module.
Standby state
'INUSE "light, no
flicker;
Telephone dial-up
no reaction
integrated circuit
board bad,
Telephone bad
6. check line or replace
telephone
7. Replace new integrated
circuit board.
Equipment use
anomaly
Factory default
Hand free Input *00#000#
Fixed Wireless Terminal
COPYRIGHT@ SHENZHEN DOBRY TECHOLOGY CO., LTD
9
Warranty Card
Please fill in the blanks carefully, and keep it properly as the voucher for warranty.
Type of Equipment
User’s name
Contact Tel.no.
Address
Date of Ex-works
Date of Maintenance
Damage
Maintainer
Sales Agent
(Stamp)

Navigation menu