Daily Equipment Care Checklist

User Manual: Daily--Equipment-Care-Checklist

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

NSCA Technologies & Tra-Cal Lab
Daily Test Equipment Care and Maintenance Checklist
Confirm

Step

Self Checklist

1

Visually check your work area to see that there are no static-generating materials, insulating work
surfaces, or static-generating tools.

2

Read the instrument Operation Manual. Check guidelines on maximum power thresholds for RF and
Microwave equipment and ESD and DC damage levels.

3

Clear your work area of static charge generators for a distance of at least 1 meter from ESD sensitive
items.

4

Do not move the instrument if the disk/floppy drive is running. Always follow defined procedures to power
on and shut down the instrument to prevent loss or damage to the instrument's system configuration or
saved data.

5

Visually check that the ground wiring to the workstation has not been disconnected or damaged.

6

Make sure connectors, adaptors, and cables are the correct sizes and are in good condition. Always use
torque wrench tools and follow manufacturer's cable and connector care procedures.

7

Check the input signal when applying these signals to sensitive precision measurement devices. Properly
apply DC blocking capacitors or attenuators as necessary. Check that the external power supply will not
supply too much current, is within the stability tolerance, and does not have significant switching
transients.

8

Maintain temperature at 20° C, 68° F and humidity within a satisfactory range within instruments
specification and prevent large fluctuations.

9

Check for proper ventilation and clean the vents of your instruments. Inadequate airflow can result in
high internal temperatures which can lead to instrument failure. If your instrument has fans and fan
filters, make sure that they are cleaned periodically.

10

Make sure that there are no static generators inside conductive containers with ESD sensitive items.

11

Visually check that all ESD sensitive parts, assemblies, or products are completely inside closed
conductive containers.

12

Make sure that all shielding containers have an approved static attention label on the outside.

13

Make sure that all cleaners, solvents, coatings, and sprays used at your workstation are ESD approved.

14

Put on wrist strap and conductive footwear, and any special garments which are required in your job. Test
and record the wrist strap and footwear resistance to ground using the recommended grounding
methods.

15

Don't allow anyone who is not grounded closer than 1 meter to your static safe area. Wear static control
attire before entering ESD controlled area.

NSCA Technologies & Tra-Cal Lab | 7901 Beechcraft Ave., Ste. M & N, Gaithersburg, MD 20879 | www.nscainc.com



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2017:12:15 13:58:59-05:00
Modify Date                     : 2017:12:15 13:58:59-05:00
Producer                        : Corel PDF Engine Version 17.6.0.1021
Author                          : Marketing back off
Creator                         : CorelDRAW X7
Title                           : Daily Test Equipment Care Checklist.cdr

EXIF Metadata provided by EXIF.tools