Ballantine California 400SX Ditch Witch Catalog 10 08

User Manual: California 400SX

Open the PDF directly: View PDF .
Page Count: 77

Download
Open PDF In Browser	View PDF

Replacement Parts for

DitchWitch

®

Trenchers
Chains
Cutting Teeth
Sprockets
Bearings
Carbide Teeth

Anoka, Minnesota

Atlanta, Georgia

Ontario, California

Centralized Customer Service: 800/328-2424
w w w . b a l l a n t i n e i n c . c o m

Faster Service
Better Quality
Lower Prices

Replacement Parts for
®

DitchWitch
Effective 10/08

Replacement Parts for Ditch Witch® Trenchers
Ditch Witch® is a registered trademark of The Charles Machine Works, Perry, OK.
Ordering Instructions
All credit accounts must be approved by our Anoka, Minnesota office.
Please order by part number and give the make and model of your machine.
The enclosed parts and price list supersedes all others.
(Prices are subject to change without notice.)
You may order from the office which is most convenient for you.

Main Office
840 McKinley Street
Anoka, Minnesota 55303

Branch Office
675 Wesleyan Drive Southwest
Atlanta, Georgia 30336

Toll Free Customer Service
Toll Free 800-328-2424
FAX 763-427-2277

Branch Office
801 S. Dupont, Suite G
Ontario, California 91761

Trencher Chain, Base Plates and Cutters for the
Ditch Witch HT220 Track Machine Are Also Available From Ballantine, Inc.
®

Ballantine Provides Digging Systems Designed for Large Track Trenchers
in All Ground Conditions Throughout the World.
Take Advantage of Ballantine’s Superior Quality Products and
Our 50 Years of Expertise in the Trenching Industry.

Index
Index
Page 1

Trencher Chain Identification Sheet

Page 2

Chain Assembly Guide

Page 3

Chain Assembly Configurations

Page 4

Smart Part Numbering System

Page 5

Chains for Walk Along Models

Page 6

Model(s): M, M422 Series. Drive Parts

Page 7

Model(s): M Series, 1410, 1420, 1500, 1810, 1620, 350SX, 400SX, 2020. Boom, Auger & Drive Parts

Page 8-9

Model(s): C-7, C-9, C77, C99, 350SX. Boom & Drive Parts

Page 10

Model(s): M Series, C Series, J-20, 1410, 1420, 1500, 1810. Teeth & Accessories

Page 11-12

Model(s): M Series, C Series, 350SX, 400SX, 1010, 1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420,
1620, 1810, 1820, 2020, 2200. Chain,Teeth & Accessories

Page 13

Model(s): 1010, 1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820, 2020.
Roller Booms, Sprockets, Rollers & Bearings

Page 14

Model(s): 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820, 2020.
Roller Booms, Sprockets & Roller

Page 15

Model(s): J20, 2200, 2300, 2310, 3610, RT36 & Attachments H311, H312. Boom Parts

Page 16-17

Model(s): 2200, RT36. Boom, Sprockets, Bearings & Belts

Page 18

Chains for Mid-Size Riding Trenchers

Page 19

Model(s): 2200, 2300, 2310, 3610, RT36 & Attachments H311, H312.
Sprocket Style Booms, Sprockets & Bearings

Page 20

Model(s): 2300, 2310, 3500, 3610, 3700, 4500 & Attachments H300 Series, H313 & H314.
Roller Booms, Sprockets & Roller

Page 21

Model(s): 2300, 2310, 3500, 3610, 3700, 4500 & Attachments H300 Series, H314, H514, H515,
H552. Roller Booms, Sprockets & Roller

Page 22

Model(s): J20, 2200, 2300, 2310, 3500, 3610, 3700, RT36 & Attachments H300 Series, H500 Series.
Teeth & Accessories

Page 23-24

Model(s):V30, R30, 3210. Booms, Sprockets, Bearings & Belts

Page 25-26

Model(s):V30, R30, 3210, 3500, 3610, 3700, 4500. Chain,Teeth & Accessories

Page 27-29

Model(s): 3610, RT36, R40, 4010 & Attachments H300 Series, H500 Series,
A/H 400, A/H 500 using 2" Pitch Chain. Boom Sprockets, Bearings, Auger Shafts & Accessories

Page 30-31

Model(s): R40, 3210, 3500, 3700, 4010, 4500, RT36, RT40. Teeth & Accessories

Page 32-33

Model(s): J20, 2200, 2300, 2310, 3500, 3700,V30, R30, R40, 3210, 3610, 4010, 4500.
Chain & Accessories

Continued on Page ii…
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page i

Index
Page 34

Chains for Large Riding Trenchers

Page 35-36

Model(s): R30, R40, 3210, 4010 & Attachments
H300, A/H400, A/H500. Boom Sprockets, Bearings, Augers & Accessories

Page 37

Model(s): A/H500, A615, 510A. Sprockets, Rollers, Bearings, Augers & Accessories for
Alligator Boom

Page 38-39

Model(s): R40, 4010, R60, R65, 5010, RT55, 5110, 6510, 7510, RT75, 7610, 8020, RT95, RT115,
& Attachments A/H400, A/H500, H700. Chain,Teeth & Accessories

Page 40

Model(s): R60, R65, 5010, 5110, RT55, 6510, 7510, RT75, 7610, 8020, RT95, RT115, A/H400,
A/H500, H700. Anti-Back Flex Chain

Page 41

Model(s): R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020, & Attachments A/H400, A/H500,
H700. Boom Parts, Sprockets, Bearings & Accessories

Page 42

Model(s): R40, R60, R65, 4010, 5010, 6510, 7510, 8020, & Attachments A/H400, A/H500, H700.
Auger Parts & Accessories

Page 43-44

Model(s): R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020 & Attachments A/H400, A/H500,
H700. Drive Sprocket Head Shaft & Components

Page 45-46

Chain & Accessories for Ultra Heavy-Duty Trench-ALL® 3110

Page 47

Model(s): R100 & AR12, RT115. Chain

Page 48

Model(s): R100, AR12. Chain,Teeth & Adapters

Page 49

Model(s): R100, AR12. Boom Sprocket, Auger Sprockets, Drive Sprockets & Accessories

Page 50-52

Chain & Accessories for Ultra Heavy-Duty Trench-ALL® 4086

Page 53

Rock & Frost Section

Page 54

Chain,Teeth & Adapters for Terminator®, Alligator, Rock & Frost Walk Along Trenchers

Page 55-56

Model(s):V30, R30, 2300, 2200, 2310, R40, J20, 3500, 3610, 3700, R40, 4500, 4010.
Terminator®, Alligator, and Rock & Frost Chain,Teeth & Adapters

Page 57-58

Model(s):V30, R30, 2300, 2310, R40, 4010, 5010, 3500, 2200, 3610, 3700, 4500.
Terminator®, Alligator and Rock & Frost Anti-Back Flex Chain,Teeth & Adapters

Page 59-60

Model(s): R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020.
Terminator®, Alligator and Rock & Frost Chain,Teeth & Adapters

Page 61

Model(s): R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020 & Attachments A/H500, A/H700.
Terminator®, Alligator and Rock & Frost Anti-Back Flex Chain,Teeth & Adapters

Page 62-63

Rock & Frost Chain,Teeth and Adapters for TA3110 Ultra Heavy-Duty Chain

Page 64

Rock & Frost Chain,Teeth and Adapters for R100, AR12, R150

Page 65-67

Rock & Frost TA4086 Chain,Teeth and Adapters for R100, AR12, R150

Page 68

Roller Chain Section

Ballantine, Inc. • Ditch Witch

®

R e p l a c e m e n t P a r t s • P a g e ii

Trencher Chain Identification Sheet

Make of Machine: _____________________________________

Model:_______________________

Measure Pitch Size (Center of Pin to Center of Next Pin)
1.654"

2.000"

2.043"

2.609"

2.648"

3.067"

3.075"

3.110"

3.125"

3.250"

4.000"

4.500"

■

■

■

■

■

■

■

■

■

■

■

■

Every 4th Pitch Attachment Spacing

Every 2nd Pitch Attachment Spacing

Anti-Backflex Chain

K-Style Chain

Determining the number of pitches in a chain.
One pitch equals the distance from one pin to the next pin. The example below is 20 pitches long.
one pitch

Right-hand Cutter

Left-hand cutter
* Auburn Cutters are the Opposite
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 1

Chain Assembly Guide
GROUND CONDITIONS/APPLICATION
CHAIN ASSEMBLY OPTIONS

Heavy/Wet

Sandy

Loose Dirt

Medium

Hard

Rocky

Cup Assembly/4 pitch
Cup Assembly/2 pitch
Combo/Terminator-Cup
Combo/Rock & Frost-Cup
Full Terminator (bolt-on)
Full Rock & Frost (bolt-on)
LP Welded Terminator
LP Welded Alligator
LP Welded H-Plate
Anti Back–Flex Chains

Recommended as an upgrade to any of the chain assemblies listed.
ABF Chains are designed for more severe ground conditions.

This chart shows the most popular styles of chain assemblies and recommended guidelines as to their
usage. Only basic catagories of ground conditions are shown.
These are recommendations only. Please consult a Ballantine representative when matching chain
assemblies with specific ground conditions or any special application requirements.
Key:

Not Recommended
Recommended
Best

Parts for earlier models, not listed in this catalog are also available.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 2

Chain Assembly Configurations

Cup Assembly – 2 Pitch

Cup Assembly – 4 Pitch

Combo/Terminator – Cup

Combo/Rock & Frost Cup

Full Terminator

Full Rock & Frost

LP Welded Alligator

LP Welded H-Plate

LP Welded Terminator
Ballantine, Inc. • Ditch Witch

Anti Back-Flex Chains
®

Replacement Par ts • Page 3

Ballantine, Inc.
Smart Part Numbering System
for Chain Assemblies
Ballantine's smart part numbering system has been developed to allow people to easily identify the various
chain assemblies that are available and what suits specific applications. The diagram below explains what each
section of the part number means.

B 20002 00 B 25
Number of Stations
(Tooth attaching points)

Chain Size
(see chart below) Digging Width
in inches

B = Ballantine
TA = Trench All®
AL = Alligator
SH = Terminator® Welded
D = Ditch Witch® teeth (1.654" only)
C = Case teeth® (1.654" only)
M = Melroe®/Bobcat®/Burkeen® teeth (1.654" only)
V = Vermeer® teeth (1.654" only)
T = Terminator® Bolt on the side

Assembly Configuration
B = Bare Chain
C = Cup Assembly
R = Rock & Frost
M = Mixed (Rock & Frost and Cup Teeth)
H = H-Plate
V = Alligator (.735)
D = Alligator (.765)
G = Ground breaker mixed chain

Ditch Witch® Chain Size Chart
TA1654-4

1.654" Pitch every 4th chain

(34,000 lb. T.S.)

TA1654-2

1.654" Pitch ABF chain

(34,000 lb. T.S.)

TA1654HD-2

1.654" Pitch Heavy Duty ABF chain (38,000 lb. T.S.)

2-4

2.00" Pitch every 4th chain

(50,000 lb. T.S.)

2ABF-2

2.00" Pitch ABF chain

(50,000 lb. T.S.)

3067HD-2

3.067" Pitch Heavy Duty chain

(110,000 lb. T.S.)

3067LD-2

3.067" Pitch Light Duty chain

(70,000 lb. T.S.)

3067ABF-2

3.067" Pitch ABF chain

(110,000 lb. T.S.)

3067-4

3.067" Pitch every 4th chain

(110,000 lb. T.S.)

TA3110-2

3.110" Pitch Trench All chain

(165,000 lb. T.S.)

TA4086-2

4.086" Pitch Trench All chain

(225,000 lb. T.S.)

450-2

4.500" Pitch R100 style chain

(150,000 lb. T.S.)

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 4

Chains for Ditch Witch®
Walk Along Models

1

2

3

Ref No. Part No.
1
2
3

Note:

TA1654-4
TA1654-2
TA1654HD-2

Description

Weight (lbs)

1.654" Pitch Chain every 4th
1.654" Pitch Chain ABF
1.654" Pitch Chain Heavy Duty ABF

34,000 T.S.
34,000 T.S.
38,000 T.S.

The Trench-All® Chain lines are specifically engineered for today’s higher horsepower trenchers and their
roller style booms.
All Trench-All® Chains are ultra heavy duty anti back-flex chains with raised rivet design.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 5

Drive Parts for Models M & M422 Series Trenchers
1

19
2

5

3

6

9

14

10

15

11

16

18

4
7

21

8

Ref No. Part No.
1
N/S
2
3
4
5
6
7
8
9
10
11
12
13
N/S
14
N/S
15
16
17
N/S
18
19
20
21

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

165-415
165-416
165-944
105-067
105-065
180-031
180-037
155-802
110-003
125-204
125-203
125-205
115-454
180-035
180-036
180-032
105-461
105-331
105-330
115-465
105-704
140-702
145-047
105-352
140-038

12

20
13

17

Description

Weight (lbs)

Head Shaft, 8" Pivot - 31" Long
Head Shaft, 12" Pivot - 341⁄2" Long
Key (1⁄4" x 13⁄4")
Bolt (1⁄2" N.C. x 23⁄4")
Nut Lock 1⁄2" N.C.
Dirt Shield
Spacer Seal
Seal
Bearing Shield
Cone Bearing
Cone Bearing W/ Seal
Bearing Cup
Retaining Ring
8" Pivot Spacer
12" Pivot Spacer
Spacer
Tang Washer
Lock Washer
Adjusting Nut.
Retaining Ring
5⁄16" Set Screws
Drive Sprocket, 13⁄8" Bore
Auger
Adjusting Screw
Adjusting Block

13
15
.10
.06
.06
.1
.2
.0
.06
.19
.44
.19
.06
1.5
3.5
.1
.06
.06
.2
.06
.06
4
25
.63
1.5

Adjusting Miscellaneous Parts (not shown) for Model M
Part No.
B
B
B
B
B
B
B
B
B

140-718*
140-720*
125-010
155-814
155-815
165-320
165-321
170-002
170-005

Description

Weight (lbs)
11⁄8”

Sprocket Head Shaft
Bore (M3 - M389)
Sprocket Head Shaft 11⁄4” Bore (M3 - 22 or M329)
Drive Shaft Bearing (M2, M3)
Head Shaft Seal (M3, M389)
Dust & Dirt Seal (M3 - M389)
Head Shaft Drive - 8” Pivot (M3 or M389)
Head Shaft Drive - 12” Pivot (M3 or M329)
V Belt Set (3) (Model M3)
V Belt Set (3) (Model M)

4.5
2.5
.7
.05
.1
8.65
12
2.2
3

* Measure bore size.

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 6

Boom, Auger and Drive Parts for Ditch Witch®
Models M Series, 1410, 1420, 1500, 1810, 1620,
350SX, 400SX & Model 2020 using Sprocket Boom
4

2

1

7
5

8

6
10

11

9
13

12

14
17

16

Ref No. Part No.
1
2
3
4
N/S
5
6
7
8
9
10
11
N/S
12
13
14
N/S
15
16
N/S
17
N/S
18
N/S

18

15

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

105-352
140-038
105-515
140-551
140-552
180-445
140-775
140-759
115-464
115-554
140-028
140-712
140-653
105-379
125-009
140-051
140-060
142-006
181-361
184-017
145-204
145-183
140-703
130-124

Description

Weight (lbs)

Square Head Set Screw
Boom Adj. Block
Cotter Pin (3⁄16" x 3")
Boom Extension, 1'
Boom Extension, 2'
Sq. Idler Shaft
Dirt Shield (2 Required)
Boom End Slide & Stop, Less Sprocket
Retaining Ring
Boom Spring
Sleeve, Boom
Idler, Sprocket
Sprocket Assembly (includes ref. #’s 11, 8, 14, 6)
Bolt (3⁄4" NC x 11⁄4")
Idler Sprocket, Bearing
Boom without Sprocket Assembly
Boom Complete with Slide & Stop, 2 Sprockets
Split Sprocket (142-039)
Hub for 1410/1420
Hub for 1620
Auger – 1410 & 1420 Only
Auger – 1810 Only
Drive Sprocket (1410, 1420, 1810 & 1500)
Drive Chain 1420 #50-92p (not shown)

Ballantine, Inc. • Ditch Witch

®

.63
1.5
.06
11
16
.2
.25
11.07
.06
1.15
.39
6.5
7.85
.9
1.5
21.53
54
6.18
5
5
27.90
4.2
3.36

Replacement Par ts • Page 7

Boom and Drive Parts for Ditch Witch®
Models C-7, C-9, C77, C99 & 350SX

1

14

2

4

3

5
6

11

Ref No. Part No.
1
N/S
2
N/S
3
N/S
4
5
6
7
8
9
10
11
12
13
14

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-088
140-090
140-499
140-498
140-712
140-653
140-770
115-553
115-001
140-775
125-009
115-464
180-445
105-379
105-372
140-794
105-352

10

12

7

8

9

13

Description
Boom Assembly (Less Sprocket)
Boom Assembly (With Sprocket)
Boom Only
Boom Assembly
Sprocket
Sprocket Assembly (includes ref. #’s 2, 6, 7, 8)
Slide & Stop
Boom End Spring
Zerk Fitting (1⁄8" NPT Str)
Washer, Shield
Bearing, Idler Sprocket
Snap Ring, Idler Sprocket
Idler Shaft
Bolt (3⁄4" x 11⁄4")
Lock Nut (3⁄4")
Boom End
Square Head Set Screw

Weight (lbs)
17
26

6.5
7.5
6.5
.63
.06
.25
1.5
.06
1
.19
.10
7.6
.63

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 8

Boom and Drive Parts for Ditch Witch®
Models C-7, C-9, C77, C99 & 350SX,
continued

17
15

16
21
31

18
22
19
23
26

25
20

24
32
27
29
28
30

Ref No. Part No.
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
NS
NS
NS

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

145-099
115-465
140-703
110-003
155-802
125-204
125-203
125-205
180-037
180-031
115-657
170-033
130-006
130-008
130-001
130-002
140-028
105-047
170-006
170-001
105-146

Description

Weight (lbs)

Auger
Snap Ring
Drive Sprocket 13⁄8" Bore
Machinery Bushing
Seal
Bearing
Bearing
Race
Seal Cover
Dirt Shield
Urethane Washer
Belt Set (3 Belts)
Drive Chain (101 P) #40RC
Drive Chain (103 P) #40 RC
Connector Link
Offset Link
Boom Sleeve
Locknut (3⁄8")
Belt Set, C49 - Steel Cable (2)
Belt Set, (2) Models (C2, C3, C4, C49)
Bolt (3⁄8" NC x 21⁄4")

Ballantine, Inc. • Ditch Witch

®

15
.06
4.2
.10
.10
.19
.44
.19
.2
.1
.06
2.75
1.75
2
.09
.02
.5
.06
1.5
1
.06

Replacement Par ts • Page 9

Teeth and Accessories for Ditch Witch® Trencher Models
M Series, C Series, J-20, 1410, 1420, 1500, & 1810 using 1"
Hole Spacing on side bars for cutters

23
21

20
24

22

Replacement Drive Shaft for Ditch Witch® Models C7, C9, C77 & C99
Ref No. Part No.
22
23
24
N/S

B
B
B
B

165-443
105-330
105-331
105-461

Description

Weight (lbs)

Head Shaft (Replaces # B 165-382)
Nut (1-3/8" NF) (Replaces # B 105-380)
Lockwasher (1-3/8" NF) (Replaces # B 105-381)
Tang Washer - Not Shown

Ballantine, Inc. • Ditch Witch

®

11
.25
.06
.06

Replacement Par ts • Page 10

Chain, Teeth and Accessories for Ditch Witch®
Models M Series, C Series, 350SX, 400SX, 1010,
1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1620,
1810, 1820, 2020 & 2200
(1.654" Pitch Chain with 13⁄4" Side Bar Hole Spacing)

1

19

9

10

12

7

6

16
20

18

13

14

24

11

26

29
17

15
21

8

Ref No. Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

TA1654-4
B 136-024
B 136-025
B 1010CCL
B 1010CCR
B 105-047
38LW
B 105-099
B 136-028
B 135-320
B 105-098
6576368
B 105-162
B 105-183
B 105-052
B 136-027
B 136-029
B 105-075
B 137-001
B 137-007
B 137-003

Description

Weight (lbs)

1.654" Pitch every 4th
Tooth RH
Tooth LH
Tooth LH (MTO Only)
Tooth RH (MTO Only)
Locknut (3⁄8")
Lockwasher (3⁄8")
Bolt (3⁄8" x 7⁄8")
Tooth Spacer (3⁄8" x 1")
Tubular Spacer (outside) (181-650)
Bolt (3⁄8" x 3")
Tubular Spacer (cup-cutter, inside) (181-651)
Bolt (3⁄8" x 21⁄4")
Bolt (3⁄8" x 21⁄2") (709-915)
Bolt (3⁄8" x 11⁄4")
5" Flat Spacer
Tooth Spacer (1" sq)
Bolt (3⁄8" x 2")
Conn Pin
Key
Roller Link

34K T.S.
.55
.55
.55
.55
.02
.05
.06
.25
.1
.06
.06
.06
.06
.06
.75
.06
.10
.01
.24

continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 11

Chain, Teeth and Accessories for Ditch Witch®
Models M Series, C Series, 350SX, 400SX, 1010,
1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1620,
1810, 1820, 2020 & 2200, continued
(1.654" Pitch Chain with 13⁄4" Side Bar Hole Spacing)

22

32

30

31

25
23

5
2

3

28

Ref No. Part No.
22
23
24
25
26
27
28
29
30
31
32

B 137-015
B 137-014
B 136-047
B 500-003
B 136-048
B 105-258
1010GBL
1010GBR
B 105-022
B 137-002H
TA1654-4CL
B 136-049

4

27

Smart Pt. No.

Description

B1370200B26
B1370200B08

Chain (7' 2") 2 pitch spacing
Chain (2' 2") 2 pitch spacing
Adapter for 8" cut
Bolt (3⁄8" x 23⁄4") (for 8" adapter)
Adapter 10" cut
Bolt (3⁄8" x 33⁄4") (for 10" adapter)
Ground Breaker L.H.
Ground Breaker R.H.
Bolt (3⁄8" x 4")
Conn Link Double Standard
Conn Link Single Standard
Adapter 12" cut

Ballantine, Inc. • Ditch Witch

®

Weight (lbs)
11.52
35.30
2.35
.06
3.05
.06
.75
.75
.07
1.4
1.1
4.25

Replacement Par ts • Page 12

Roller Booms, Sprockets, Rollers, and Bearings for
Ditch Witch® Models 1010, 1020, 1030, 1210, 1220,
1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820 &
2020
1
5

4

10

9

2

15

6

12

11

8
3

17
13

16

7
14

20

19

18
21

Ref No. Part No.
1
N/S
2
N/S
3
N/S
4
5
6
7
8
9
10
11
12
13
N/S
14
15
16
17
18
19
20
21

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-488
140-487
140-534
140-533
143-096
143-093
105-300
105-310
106-033
105-352
106-034
110-054
184-037
115-464
125-009
142-755
142-754
183-469
105-379
165-985
165-923
145-265
145-271
145-309
140-703

Description

Weight (lbs)

24" Roller Boom Only (U-Bracket)
24" Boom Assembly with Roller (U-Bracket)
24" Roller Boom Only (Flat Back) (140-550)
24" Boom Assembly with roller (Flat Back)
30" Roller Boom Only
30" Boom Assembly with Roller
Bolt (1⁄2" X 31⁄4")
3⁄4" Jam Nut
1" Jam Nut
Set Screw (3⁄4" X 5")
Screw Set (1" x 6")
Machinery Bushing
Machinery Bushing (1⁄8" thick)
Snap Ring
Bearing
Roller Only
Roller Assembly with Bearing
Idler Shaft
Bolt (3⁄4" X 11⁄4")
Key (1⁄4" sq x 21⁄4" long)
Key (1⁄4" sq x 2" long)
Auger
Auger (Long–41⁄2" Collar)
Outboard Bearing Auger (Not for model 1820)
Drive Sprocket

Ballantine, Inc. • Ditch Witch

®

35
42.1
30
42

.21
.06
.07
.10
.2
.06
.1
.06
1.50
7.8
12.65
.9
.9
.03
.03
13.55

4.2

Replacement Par ts • Page 13

Roller Booms, Sprockets, and Roller for
Ditch Witch® Models 1030, 1210, 1220, 1230, 1330,
1410, 1420, 1610, 1620, 1810, 1820, & 2020
1

3

5

4

6

2
7

8

10

15

12

13

9

11

14

Ref No. Part No.

Description

Pg.14
N/S
1
N/S
N/S
N/S
2
N/S
3
4
5
6
7
8
9
10
11
N/S
12
13
14
15
N/S

Roller Boom, 30" (Boom Only)
Roller Boom Assembly , 30"
Roller Boom 36" (Boom Only)
Roller Boom Assembly 36"
Roller Boom 48" (Boom Only)
Roller Boom Assy 48"
Roller Only
Roller Assembly (brg. Snap Ring, Washer)
Machinery Bushing
Machinery Bushing (1⁄8" thick)
Bearing
Snap Ring
Sq. Idler Shaft
Bolt
Adjusting Screw (1" X 6" n.c)
Nut (1" n.c.)
Sprocket, Split (Not for model 1820)
Sprocket, Split
Hub
Sprocket Hub (184-205) (1620)
Drive Sprocket
Key
Hex Drive Sprocket (2020)

B 143-096
B 143-093
B 140-519
B 140-518
B 140-527
B 140-531
B 142-755
B 142-754
B 110-054
B 184-037
B 125-009
B 115-464
B 180-445
B 105-379
B 106-034
B 106-033
B 142-006
B 142-039
B181-361
B 184-017
B 140-703
B 165-923
B 142-023

Ballantine, Inc. • Ditch Witch

Weight (lbs)

®

47
60.50
80
7.8
12.65
.06
.1
1.5
.06
.75
.19
1.3
.15
6.18
6.25

4.2
.03

Replacement Par ts • Page 14

Boom Parts for Ditch Witch® Models
J20, 2200, 2300, 2310, 3610, RT36 &
Attachments H311, H312
1

3

2

8

12
5

4

6

10

7

15

11

16
14

9
17

13

Ref No. Part No.
1
2
3
4
N/S
5
N/S
6
7
8
9
N/S
N/S
10
11
12
13
N/S
14
15
16
N/S
N/S
17
N/S

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-759
105-379
180-445
140-712
140-653
140-711
140-652
125-009
140-775
115-464
140-062
140-061
140-057
115-001
140-028
115-554
140-551
140-552
140-038
105-352
140-701
140-721
170-020
170-061
140-007

Description

Weight (lbs)

Boom End Slide & Stop, Less Sprocket
Bolt (3⁄4" x 11⁄4")
Sq. Idler Shaft
Idler Sprocket, 12 Tooth - 1.654" Std. Chain
Std. Sprocket Assembly, 12 Tooth - 1.654" Std. Chain
Idler Sprocket, 9 Tooth - 2" H.D. Chain
H.D. Sprocket Assembly, 9 Tooth -2" H.D. Chain
Square Hole Bearing
Dirt Shield
Retaining Ring
Digging Boom, Without Sprockets
Digging Boom Assy. with 3 Sprockets - Std. 1.654"
Digging Boom Assy. with 3 Sprockets - 2" H.D.
Straight Zerk 1⁄8" NPT
Urethane Boom Sleeve
Digging Boom Spring
1' Digging Boom Extension
2' Digging Boom Extension
Boom Adjusting Block
Set Screws Boom Adjustment
Head Shaft Drive Sprocket - 1.654" Std.
Head Shaft Drive Sprocket - 2" H.D. Chain
V Belt Set
V Belt Set
Boom Gussets

Ballantine, Inc. • Ditch Witch

®

12
.3
1
6.5
8
7
9
1.5
1
.06
34
74
71
.01
.4
1.2
11
16
1
.63
5
5.5
2
2
7

Replacement Par ts • Page 15

Boom, Sprockets, Bearings and
Belts for Ditch Witch® Model 2200, RT36

1

2

6

3
7
5

4

9

8

10

12

11

Ref No. Part No.
1
N/S
N/S
2
3
4
N/S
5
N/S
6
7
8
9
10
11
12
13
N/S

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-242
140-240
140-241
140-013
115-557
140-712
140-653
140-711
140-652
115-464
140-775
125-009
180-445
105-379
140-763
140-583
140-588
140-585

13

Description

Weight (lbs)

Boom, Less Sprockets
Boom Assy. (1.654" Pitch Small Sprockets)
Boom Assembly (2" Pitch Large Sprockets)
Boom Sleeve
Boom Spring
Sprocket (1.654" Pitch)
Sprocket Assembly (1.654" Pitch)
Sprocket (2" Pitch)
Sprocket Assembly (2" Pitch)
Snap Ring
Dirt Shield
Sq. Hole Bearing
Sq. Shaft
Bolts (3⁄4" X 11⁄4")
Boom End
Boom Ext. (1') With 1.654" Sprockets
Boom Ext. (1') With 2" Sprocket
Boom Ext. (2') Use With Both Sprockets

44
81
86
.5
2.26
6.5
7.8
7
7.5
.06
.25
1.5
1
.19
16
24
23
34

continued on next page
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 16

Boom, Sprockets, Bearings and Belts for
Ditch Witch® Model 2200 & RT36, continued

16

15

23

17
18

20

19

14

26

21

24

22

25

Ref No. Part No.
14
15
16
17
18
19
20
21
22
23
24
25
26

B
B
B
B
B
B
B
B
B
B
B
B
B

105-265
142-005
140-701
181-267
180-028
155-704
180-026
155-801
170-028
145-173
170-061
167-003
165-901

Description

Weight (lbs)

Bolt (for Split Sprocket)
Head Shaft Sprocket (Split 2" Pitch)
Head Shaft Sprocket (1.654" Pitch)
Hub For Split Sprocket
Seal Spacer
O Ring
Fiber Spacer
Seal
Belt Set
Auger
Belt Set (3)
Headshaft With Races & Sleeves
Key

Ballantine, Inc. • Ditch Witch

®

.13
4.5)
7.65
3
1.45
.01
.01
.2
1.10
23.5
1.78
24.9
.03

Replacement Par ts • Page 17

Chains for Ditch Witch®
Mid-Size Riding Trenchers

1

2

Ref No. Part No.
1
1
2
2

B
B
B
B

135-214
135-212
137-215
137-216

Smart Pt. No.

Description

B2000400B18
B2000400B06
B2ABF00B36
B2ABF00B12

Chain, 72P, 4
Chain, 24P, 4
Chain, 72P, 2
Chain, 24P, 2

Ballantine, Inc. • Ditch Witch

®

pitch
pitch
pitch
pitch

Weight (lbs)
spacing (bare)
spacing (bare)
spacing, anti back flex, (bare)
spacing, anti back flex, (bare)

90
30
108
38

Replacement Par ts • Page 18

Sprocket Style Booms, Sprockets and
Bearings for Ditch Witch® Models 2200, 2300,
2310, 3610, RT36 & Attachments H311, H312
1
2
5
3

)

(

7

4
16
10

8

9

11

15

14

12

6
13
18
17

Ref No. Part No.
1
N/S
2
3
4
5
6
N/S
7
8
9
10
11
N/S
12
13
14
N/S
N/S
N/S
15
16
17
18
N/S

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-248
140-241
115-009
125-209
115-557
140-013
140-707
140-654
140-765
180-062
180-448
105-313
140-588
140-585
142-005
181-267
105-265
125-002
125-247
125-246
180-534
145-173
167-003
165-901
170-063

Description

Weight (lbs)

Boom, Less Sprocket
Boom Assembly
Zerk
Bearing Assembly
Boom Spring
Boom Sleeve
Sprocket, Idler (Less Bearings)
Sprocket Assembly (includes Ref. #’s 6, 3, 8)
Slide & Stop
Dirt Shield
Idler Bolt for Boom End
Idler Nut
1' Boom Extension
2' Boom Extension
Headshaft Sprocket (Split)
Hub For Split Sprocket (13⁄4" Bore; 1⁄2"DBL Keyways)
Special Bolt (For Split Sprocket)
Bearing (Not Shown)
Bearing (Not Shown)
Bearing (Not Shown)
Idler Bolt, Long
Auger
Headshaft With Races & Sleeve
Key
Belt Set (set of 4) (not shown)

Ballantine, Inc. • Ditch Witch

®

43.7
80.3
.06
1.5
2.26
.55
5.7
6.6
18.1
.19
1.13
.19
20.4
29.05
5.7
3
.13
2
.88
1
1.55
25.3
24.95
.10
2.49

Replacement Par ts • Page 19

Roller Booms, Sprockets and Roller for
Ditch Witch® Models 2300, 2310, 3500,
3610, 3700, 4500 & Attachments H300, H313,
H314 continued
1

2
3
8

7

(

6

)

Ref No. Part No.
1
N/S
N/S
N/S
2
N/S
3
4
5
6
7
8
9
N/S

B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-503
140-502
140-509
140-515
142-752
142-751
180-448
105-313
180-062
125-209
106-034
106-033
142-025
142-127

N/S
N/S
10
N/S

B
B
B
B

142-044
142-029
142-026
142-030

4
5

10

9

Description

Weight (lbs)

Roller Boom Only (47.95") (3’ Dig Depth (36T)
Roller Boom Assy (47.95")
Roller Boom Only (59.2") (4’ Dig Depth (42T)
Roller Boom Assembly (59.2")
Roller Only
Roller Assembly
Idler Shaft
Nut.
Shield
Bearing Assembly (2)
Adjustment Screw 1 x 6"
Nut (1" NC)
Drive Sprocket (12 Tooth) with 5⁄8" holes
Drive Sprocket (12 Tooth) Split for 2” pitch – Metric
(12 tooth option for H313, H314)
14 tooth option for H313, H314 – Metric
Drive Sprocket (12 Tooth) with 1⁄2" holes
Dr.ive Sprocket (14 Tooth) with 5⁄8" holes
Drive Sprocket (14 Tooth) with 1⁄2" holes

110
170
115
164
26.41
27
1.13
.19
.12
1
1.3
.06
9
9
9
9
13.8
13.8

continued on next page
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 20

Roller Booms, Sprockets and Roller for
Ditch Witch® Models 2300, 2310, 3500,
3610, 3700, 4500 & Attachments H300 Series,
H314, H514, H515, H552 continued

11

12

15

13

16

14

17

Note: H300 & H500 series can also use 3.067” Pitch Chain

Ref No. Part No.
11
12
13
14
15
16
17

B
B
B
B
B
B
B
B

142-021
142-020
142-031
181-267
105-265
142-005
105-472
105-833

Description

Weight (lbs)

Boom End Sprocket
Boom End Sprocket Assembly with Bearings
Hex Bore Auger Sprocket (H300 series)
Sprocket Hub
Bolt for Split Sprocket
Drive Sprocket (2300, 2310, 3610)
Bolt (1⁄2" NC x 5")
Flange Locknut (1⁄2" NC)

Ballantine, Inc. • Ditch Witch

®

3
.13
5.7
.02

Replacement Par ts • Page 21

2" Pitch Chain, Teeth & Accessories for
Ditch Witch® Models J20, 2200, 2300,
2310, 3500, 3610 & 3700, RT36 &
Attachments H300 Series, H500 Series
11

1

18

2

5

4

12

16

6
10

3
8

7

9

20

19

17
13

14
15

21
Ref No. Part No.
1
2
3
4
5
6
7
8
9
N/S
N/S
10
11
12
13
13
14
15
16
17
18
19
20
21

B 135-924
B 135-925
B 105-043
B 105-111
B 105-067
B 105-082
B 135-912
B 135-950
B 135-913
B 135-914
B 135-915
B 105-002
B 105-065
B 105-076
B 135-213
B 135-210
B 135-351
B 135-358
B 135-202
B 135-202H
B 135-203
B 135-501
B 135-502
2ABF-2

Smart Pt. No.

B2000400B17
B2000400B03

Description
Cutter, R.H.
Cutter, L.H.
Bolt (1⁄2" x 1")
Bolt (1⁄2" x 4")
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 21⁄2")
Adapter 8"
Adapter 10"
Adapter 12"
Adapter 14"
Adapter 16"
Bolt (1⁄2" x 21⁄4")
Nut (1⁄2")
Bolt (1⁄2" x 3")
Chain, Less Teeth 11'4"
Chain, Less Teeth 2'
Chain Pin
Cotter Key
Conn. Link
Conn. Link ( 2 pitch spacing)
Roller Link
Ground Breaker, L.H.
Ground Breaker, R.H.
Chain, 2" Pitch ABF

Ballantine, Inc. • Ditch Witch

®

Weight (lbs)
.9
.9
.06

2.88
3.44
4.40

.06
.06
.06
85
15
.2
.01
1
.4
1
1
1

Replacement Par ts • Page 22

Booms, Sprockets, Bearings & Belts
for Ditch Witch® Models V30, R30, & 3210
2

1

3

4

7

(
11

8

5

)

6
9
10

12

13

Ref No. Part No.
1
2
N/S
3
4
N/S
5
6
7
8
9
10
11
N/S
N/S
N/S
12
13
14
15

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-765
140-707
140-654
140-013
140-006
140-059
125-209
115-557
115-009
105-313
180-448
180-062
140-553
140-565
140-554
140-562
140-704
142-005
181-267
140-732

14

Description

15

Weight (lbs)

Boom End
17.62
Idler Sprocket
6.50
Sprocket Assembly
7.54
Urethane Boom Sleeve
.5
Boom Only
47.50
Boom Assembly With 3 Sprockets
100
Idler Bearing Assembly
1.5
Boom Spring
2.26
Zerk (1⁄4" Straight)
.06
1
Jam Nut (1 ⁄4")
.19
Idler Bolt. (Slide & Stop)
1.13
Dirt Shield
.19
2' Boom Extension With Gussets
38
2' Boom Extension Assy (incl. ref. no.’s #2, 5, 7, 8, 9 & 10) 45
3' Boom Extension (same style as ref. #11)
50
3' Boom Extension Assy (incl. ref. no.’s #2, 5, 7, 8, 9 & 10) 60
Sprocket Drive (V30) 13⁄4" Bore; 9 Tooth, 1⁄2" DBL Keyways 7.44
Drive Sprocket, Split (V30)
6.75
Sprocket Hub (V30)
3
Drive Sprocket, Split (R30, R40 & 3210) 14 Tooth
13.75

continued on next page
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 23

Booms, Sprockets, Bearings & Belts
for Ditch Witch® Models V30, R30,
& 3210, continued
21

19
18

17

25
24
22

27
23

26

29

28

Ref No. Part No.
17
18
19
20
21
22
23
N/S
24
25
26
27
28
29
30
N/S

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

181-048
140-728
125-517
165-410
125-246
180-029
170-019
170-041
180-252
180-534
165-371
142-007
142-010
140-664
140-730
140-731A

30

Description

Weight (lbs)

Sprocket Hub (R30 & R40)
Auger Shaft & Sprocket (R30 & R40)
Pillow Block Bearing
Headshaft With Races & Sleeve 12" pivot
Race, Headshaft
Sleeve, Headshaft
V Belts (4)
V Belt Set (not shown)
Spacer
Idler Bolt, Long (for Boom Idler)
Headshaft (Fits Low Digging Attachment)
Auger Sprocket (2"P)
Drive Sprocket (2"P, One Piece)
Hex Auger Sprocket, 2" P
Idler Sprocket (14 Tooth)
Idler Sprocket Assembly (B 140-659)

Ballantine, Inc. • Ditch Witch

®

6.5
33
10.38
28
1
.25
22
1.75
.25
2.65
29

Replacement Par ts • Page 24

2" Pitch Chain, Teeth and Accessories for
Ditch Witch® Models V30, R30, 3210, 3500,
3610, 3700, 4500

1

15
16
2

11

4

3

10
9

6
8
5

Ref No. Part No.
1
1
1
2
3
N/S
4
N/S
5
6
7
8
9
10
11
N/S
N/S

B 135-214
B 135-212
B 135-210
2ABF-2
B 135-924
B135924516
B 135-925
B135925516
B 105-043
B 105-111
B 105-067
B 105-082
B 135-912
B 135-950
B 135-913
B 135-914
B 135-915

Smart Pt. No.

Description

B2000400B18
B2000400B06
B2000400B03

Chain, 12' (4 pitch spacing) Bare
Chain, 4' Bare
Chain, 2' Bare
Chain, 2" Pitch ABF
Cutter, R.H.
Cutter, R.H. (HD 5⁄16" Thick)
Cutter, L.H.
Cutter, L.H. (HD 5⁄16" Thick)
Bolts (1⁄2" x 1")
Bolt (1⁄2" x 4")
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 21⁄2")
Adapter, 8"
Adapter, 10"
Adapter, 12"
Adapter, 14"
Adapter, 16"

7

Weight (lbs)
90
30
15
.9
1.0
.9
1.0
.06

2.88
3.44
4.44

continued on next page
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 25

2" Pitch Chain, Teeth and Accessories for
Ditch Witch® Models V30, R30, 3210, 3500,
3610, 3700, 4500, continued

20

13

19

17

18

14

12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

B 105-002
B 105-065
B 105-076
B 135-351
B 135-358
B 135-202
B 135-203
B 135-501
B 135-502
B 105-066
B 105-121
B 135-952
B 135-951
B 135-953
B 105-136
V30

23

26

21

12

Ref No. Part No.

24

25

27

22

Description
(1⁄2"

Weight (lbs)

21⁄4")

Bolt
x
Nut (1⁄2" NC)
Bolt (1⁄2" x 3")
Chain Pin
Cotter Key
Conn. Link
Roller Link
Ground Breaker L.H.
Ground Breaker R.H.
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 2")
Chain Spacer (Outside) (1.810” Long)
Chain Spacer (Inside) (1.590” Long)
Chain Spacer (2 Inside) (1.300” Long)
Bolt (1⁄2" x 31⁄2")
Flat Spacer

Ballantine, Inc. • Ditch Witch

®

.06
.06
.06
.2
.01
1
.1
1
1
.06
.06
.16
.12
.12
.06

Replacement Par ts • Page 26

Boom Sprockets, Bearings, Auger Shafts, and
Accessories for Ditch Witch® Models 3610, RT36,
R40, 4010 & Attachments H300 Series, H500
Series, A/H 400, A/H 500 using 2" Pitch Chain

1

2

4

3

7

5

6

8
9

10

11

17
14
12
16
13

15

Ref No. Part No.
1
N/S
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-707
140-654
125-209
180-448
105-313
180-062
140-732
181-048
105-302
105-385
180-057
145-475
155-703
155-805
125-259
125-258
180-071
140-728

Description

Weight (lbs)

Idler Sprocket
Idler Sprocket Assembly (Includes Ref. #’s: 1, 2, 5)
Bearing Assembly
Idler Shaft (slide and stop)
Idler Nuts
Idler Shields
Drive Sprocket (Split)
Sprocket Hub
Bolts (5⁄8" x 2")
Lock Washer (5⁄8")
Seal Spacer
Washer, Pivot Tube
O-Ring
Seal
Bearing
Race
Backup Ring
Auger Shaft & Sprocket

6.5
7.5
1
1.1
.19
19
14
3.5
.25
.06
2.1
.03
.10
.10
1.5
.10
.13
33

continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 27

Boom Sprockets, Bearings, Auger Shafts, and Accessories
for Ditch Witch® Models 3610, RT36, R40, 4010 &
Attachments H300 Series, H500 Series, A/H 400, A/H
500 using 2" Pitch Chain, continued
24

20

18

19

23

22

21

25
30
29
28

26

27
32

31

Ref No. Part No.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

145-071
145-110
145-070
145-109
125-517
105-320
130-307
130-304
130-305
125-502
170-038
170-059
181-051
165-368
142-007

Description

Weight (lbs)

Auger, L.H.
Auger, L.H. (Short)
Auger, R.H.
Auger, R.H. (Short)
Pillow Block Bearings 13⁄4" I.D.
Bolt (3⁄4" x 21⁄4" NC)
Drive Chain (80-80P)
Connector Link (#80)
Offset Link (#80)
11⁄4" P.B. Bearing
Power Band V Belts (2 Belts) – 4 grooves each
Power Band V Belts (4 Belts) – 2 grooves each
Shield (R40)
Shaft
Auger Sprocket

53
53
10.5
.25
11.5
.13
.17
7.0
2.0
2.0
.06
4.0
19

continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 28

Boom Sprockets, Bearings, Auger Shafts, and
Accessories for Ditch Witch® Models 3610, RT36,
R40, 4010 & Attachments H300 Series, H500 Series,
A/H 400, A/H 500 using 2" Pitch Chain, continued

33

34

35

37

36

39

38

42

43

44

40
41

Ref No. Part No.
33
34
35
36
N/S
37
38
39
40
41
42
43
44

B
B
B
B
B
B
B
B
B
B
B
B
B

180-534
165-371
142-010
140-730
140-731A
140-664
125-620
145-244
110-363
110-364
125-048
142-031
105-313

Description

Weight (lbs)

Idler Shaft, Long
Headshaft (Fits Low Digging Attachments)
One piece Drive Sprocket, 14T
Idler Sprocket (14 Tooth)
Idler Sprocket Assembly (B 140-659)
Auger Sprocket, 2" P
Hex Bearing Assembly
Hex Auger Shaft
Flange (LS)
Flange (NLS)
Hex Bearing
Auger Sprocket (H312)
Idler Nut

Ballantine, Inc. • Ditch Witch

®

2.0
29

Replacement Par ts • Page 29

2" Pitch Chain,Teeth & Accessories for
Ditch Witch® Models R40, 3210, 3500,
3700, 4010, 4500, RT36, RT40
1

15
2

16

13

4

3

10
6

9

14
7
5

Ref No. Part No.
1
1
1
1
2
3
N/S
4
N/S
5
6
7
8
9
10
11
N/S
N/S
12
13
14
15
16

B 135-214
B 135-212
B 135-211
B 135-210
2ABF-2
B 135-924
B135924516
B 135-925
B135925516
B 105-043
B 105-111
B 105-067
B 105-082
B 135-912
B 135-950
B 135-913
B 135-914
B 135-915
B 105-002
B 105-065
B 105-076
B 135-351
B 135-358

8

11

12

Smart Pt. No.

Description

B2000400B18
B2000400B06
B2000400B04
B2000400B03

Chain 12' Less Teeth (4 Pitch Spacing)
Chain 4' Less Teeth
Chain 2' 8" Less Teeth
Chain 2' Less Teeth
Chain 2" Pitch ABF
Cutter, R.H.
Cutter, R.H. (HD 5⁄16" Thick)
Cutter, L.H.
Cutter, L.H. (HD 5⁄16" Thick)
Bolts (1⁄2" x 1")
Bolt (1⁄2" x 4")
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 21⁄2")
Adapters, 8"
Adapters, 10"
Adapters, 12"
Adapter, 14"
Adapter, 16"
Bolt (1⁄2" x 21⁄4")
Nut (1⁄2" N.C)
Bolt (1⁄2" x 3")
Chain Pin
Cotter Key

Weight (lbs)
90
30
20
15
.9
1.0
.9
1.0
.06

2.88
3.44
4.44

.06
.06
.2
.2
.01

continued on next page
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 30

2" Pitch Chain,Teeth & Accessories for
Ditch Witch® Models R40, 3210, 3500,
3700, 4010, 4500, RT36, RT40, continued

18

27
17

28

20

19

26
21

Ref No. Part No.
17
18
19
20
21
22
23
24
25
26
27
28

B 135-202
B 135-203
B 135-501
B 135-502
B 105-066
B 105-121
B 135-952
B 135-951
B 135-953
B 105-136
B135-202H
V30

25

24

23

22

Description
Conn. Link
Roller Link
Ground Breaker L.H
Ground Breaker R.H.
Bolt (1⁄2" x 13⁄4")
Bolt (1⁄2" x 1")
Chain Spacer (Outside) (1.810” Long)
Chain Spacer (Inside) (1.590” Long)
Chain Spacer (2 Inside) (1.300” Long)
Bolt (1⁄2" x 31⁄2")
Connecting Link (2 pitch chain)
Flat Spacer

Weight (lbs)
1
.117
1
1
.06
.06
.16
.16
.16
.06
1.75

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 31

2" Pitch Anti-Back Flex Chain and Accessories for
Ditch Witch® Models J20, 2200, 2300, 2310, 3500,
3700,V30, R30, R40, 3210, 3610, 4010, 4500

1

4
9

5

11

10

3

2
7

8

6

Ref No. Part No.
1
1
1
1
1
2
3
4
5
6
7
8
N/S
N/S
9
10
N/S
11
N/S

B 137-218
B 137-215
B 137-216
B 137-217
B 137-219
B 137-202
B 137-203
B 137-351
B 137-207
B 135-912
B 135-950
B 135-913
B 135-914
B 135-915
B 105-002
B 135-924
B135924516
B 135-925
B135925516

Smart Pt. No.

Description

B2ABF00B34
B2ABF00B36
B2ABF00B12
B2ABF00B06
B2ABF00B08

ABF Chain, 11' 4" Bare
ABF Chain, 12' Bare
ABF Chain, 4' Bare
ABF Chain, 2' Bare
ABF Chain, 2' 8" Bare
Connecting Link
Roller Link
Pin & Cotter
Lock Key
Adapters, 8"
Adapters, 10"
Adapters, 12"
Adapter, 14"
Adapter, 16"
Bolt (1⁄2" x 21⁄4")
Cutter, R.H.
Cutter, R.H. (HD 5⁄16" Thick)
Cutter, L.H.
Cutter, L.H. (HD 5⁄16" Thick)

Weight (lbs)
100
108
36
18
24
1.75
1.2
.21
.01
2.88
3.44
4.44

.06
.9
1.0
.9
1.0

continued on next page
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 32

2" Pitch Anti-Back Flex Chain and Accessories
for Ditch Witch® Models J20, 2200, 2300, 2310,
3500, 3700,V30, R30, R40, 3210, 3610, 4010,
4500, continued

20

16
12

14

19

21
22

15

18

17

23

13

25
24

26

Ref No. Part No.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26

B 105-043
B 105-065
B 105-066
B 105-121
B 105-076
B 135-952
B 135-951
B 135-953
B 105-136
B 105-111
B 105-067
B 105-082
B 135-501
B 135-502
V30

Description
Bolt (1⁄2" x 11⁄4")
Locknut
Bolt (1⁄2" x 13⁄4")
Bolt (1⁄2" x 1")
Bolt (1⁄2" x 3")
Chain Spacer (Outside) (1.810” Long)
Chain Spacer (Inside) (1.590” Long)
Chain Spacer (2 Inside) (1.300” Long)
Bolt (1⁄2" x 31⁄2")
Bolt (1⁄2" x 4")
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 21⁄2")
Ground Breaker, L.H.
Ground Breaker, R.H.
Flat Spacer

Weight (lbs)
.06
.06
.06
.06
.16
.16
.16
.06

1
1

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 33

Chains for Ditch Witch®
Large Riding Trenchers

1

2

3

4

5

Ref No. Part No.
1
2
3
4
5

B 135-704
B 135-411
B 135-411-4
B 137-411
N/A

Smart Pt. No.

Description

B3067LD00B32
B3067HD00B32
B30670400B16
B3067ABF00B32
TA311000B32

70,000 Lb. Chain, Bare, 64 pitches (2P)
110,000 Lb. Chain, Bare, 64 pitches (2P)
110,000 Lb. Chain, Bare, 64 pitches (4P)
110,000 Lb. Anti back-flex Chain, Bare, 64 pitches (2P)
165,000 Lb.Trench-All® Chain, Bare, 64 pitches (2P)

Weight (lbs)
256
288
210
298
300

Note: The Trench-All® Chain lines are specifically engineered for today’s higher horsepower
trenchers and their roller style booms.
All Trench-All® Chains are extra heavy duty anti back-flex chains with raised rivet design.
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 34

Boom Sprockets, Bearings, Augers, and Accessories
for Ditch Witch® Models R30, R40, 3210, 4010 &
Attachments H300, A/H400, A/H500 using 3" Pitch
Chain
2

1

7

5

9
8

6

10

4

3
11

13

15
14

12
16
17
18

19

20

22

23

Ref No. Part No.
1
N/S
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

21

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-723
140-656
125-263
180-026
155-843
180-243
115-470
180-244
180-440
180-441
105-377
140-717
181-048
105-302
105-385
180-057
145-475
155-703
155-805
125-259
125-258
180-071
145-071
145-070

Description

Weight (lbs)

Idler Sprocket
Idler Sprocket Assembly
Bearing, Idler Sprocket (Incl: Part #125-265 & 125-266)
Spacer
Seal
Bearing Spacer
Retaining Ring
Spacer
Idler Shaft (Slide & Stop)
Idler Shaft (Boom)
Idler Shaft Nut
Headshaft Sprocket (Split)
Sprocket Hub
Bolt (5⁄8" x 2")
5⁄8" L.W.
Seal Spacer
Washer, Pivot Tube
O-Ring
Seal
Bearing
Race
Backup Ring
Auger, L.H.
Auger, R.H.

26.5
25.0
1.5
.1
.06
.31
.01
.10
3
3.0
.5
15.0
7.0
.25
.06
2.1
.03
.1
.25
1.5
1
.13
53
53

continued on next page
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 35

Boom Sprockets, Bearings, Augers, and Accessories for
Ditch Witch® Models R30, R40, 3210, 4010 &
Attachments H300, A/H400, A/H500 using 3" Pitch
Chain, continued
29

24

26

25
27

30
28
32

33

35
31

34

40
41
36
37

38
39

Ref No. Part No.
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

145-109
145-110
125-517
105-320
140-725
130-307
130-304
135-305
125-502
170-038
142-009
140-665
142-008
125-048
125-620
145-244
110-363
110-364

Description

Weight (lbs)

Auger R.H., Short
Auger L.H., Short
Pillow Block Bearing
Bolt (3⁄4" x 21⁄4")
Auger Sprocket & Shaft
Drive Chain (#80-80P)
Connector Link (#80)
Offset Link (#80)
11⁄4" Pillow Block Bearing
Power Band V Belts
Headshaft Sprocket (One piece)
Hex Auger Sprocket
Auger Sprocket
Hex Bearing
Hex Bearing Assembly
Hex Auger Shaft
Flange (LS)
Flange (NLS)

Ballantine, Inc. • Ditch Witch

®

10.5
.25
35.0
11.5
.13
.17
6.88
1.85

Replacement Par ts • Page 36

Sprockets, Rollers & Bearings for Ditch Witch®
Alligator Boom Using 3.067 Pitch Chain for
A/H500, A615, 510A

13

Ref No. 14 / Part No. B140-661
Bearing Kit for Item #13, Roller
(for individual breakdown of Bearing Kit Parts, see pg 41 Ref No.’s 7-13)

1
9

7

3

11

8

10

6

2
12

Ref No. Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

142-012
142-011
145-589
155-852
180-441
180-440
181-697
181-698
181-699
115-470
125-216
125-265
105-377
142-756
142-756A
140-661

4

Description
Idler Sprocket, Less Bearings – 19 Tooth, 20" O.D.
Idler Sprocket Assembly
Plastic Washer
External Seal (for ref. #1, Sprocket)
Shaft (43⁄8" Long)
Shaft (47⁄8" Long)
Bearing Spacer (for ref. #1, Sprocket)
Seal Spacer (for ref. #1, Sprocket)
Seal Sleeve (for ref. #1, Sprocket)
Snap Rings (for ref. #1, Sprocket)
Bearing Race (for ref. #1, Sprocket)
Bearing (for ref. #1, Sprocket)
Nut
Roller Only, 17"
Roller Assembly, 17”
Bearing Kit

5

Weight (lbs)
52
54
.08
.06
2.75
3
.05
.3
.3
.06
.63
1
.50

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 37

Chain,Teeth & Accessories for Ditch Witch® Models
R40, 4010, R60, R65, 5010, 5110, RT55, 6510, 7510,
RT75, 7610, 8020, RT95, RT115 & Attachments
A/H400, A/H500, H700 using 3" Pitch Chain
11

12

2
1

3

8

9

10

7
6

5
4

Ref No. Part No.
1
2
3
NS
4
5
6
N/S
N/S
N/S
7
8
9
10
11
11
11
12
12
12

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

135-911
135-910
135-921
135-960
135-901
135-902
135-903
135-904
135-905
135-906
105-319
105-320
105-326
105-327
135-704
135-702
135-701
135-411
135-410
135-412

Smart Pt. No.

Description

B3067LD00B32
B3067LD00B08
B3067LD00B04
B3067HD00B32
B3067HD00B08
B3067HD00B04

Cutter, L.H.
Cutter, R.H.
Spacer,Tooth 8" (3⁄8")
Spacer,Tooth (1⁄8") (70,000#)
Adapter 10" (136-071)
Adapter 12" (136-120)
Adapter 14" (136-088)
Adapter 16"
Adapter 18" (136-089)
Adapter 20"
Bolt (3⁄4" x 11⁄2")
Bolt (3⁄4" x 21⁄4")
Bolt (3⁄4" x 3")
Bolt (3⁄4" x 4")
Chain, 16' Less Teeth (70,000# Chain)
Chain 4' Less Teeth (70,000# Chain)
Chain 2' Less Teeth (70,000# Chain)
Chain 16' Less Teeth (110,000# Chain)
Chain 4' Less Teeth (110,000# Chain)
Chain 2' Less Teeth (110,000# Chain)

Weight (lbs)
2.25
2.25
.75
8.0
9.5
10.75
12
13.47
14.84
.25
.25
.25
.25
256
60
30
288
72
34

continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 38

Chain,Teeth & Accessories for Ditch Witch® Models
R40, 4010, R60, R65, 5010, 5110, RT55, 6510, 7510,
RT75, 7610, 8020, RT95, RT115 & Attachments
A/H400, A/H500, H700, continued

25

16
15
14

13

22
17

21

20

24
19

23

18

Ref No. Part No.
13
14
15
16
17
18
19
20
21
22
23
24
25

B 135-503
B3067LDCL
B 135-402
B 135-501 CP
B 105-372
B 501
B 502
B 135-404
B 135-401
3067HDCL
B 2109-911
B 2108-910
B 135-411-4

Smart Pt. No.

Description

B30670400B16

Roller Link (70,000#)
Conn. Link (70,000#)
Lock Key
Chain Pin (70,000#)
Lock Nut (3⁄4")
Ground Breaker, L.H.
Ground Breaker, R.H.
Roller Link (110,000#)
Chain Pin (110,000#)
Conn. Link (110,000#)
Super Tooth, L.H.
Super Tooth, R.H.
Chain 16' Every 4th Pitch (110,000# Chain)

Weight (lbs)
2.85
.03
.4
.10
1.3
1.3
3.40
3.4
3.5
3.5

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 39

3.067" Pitch Anti-Back Flex Chain for Ditch
Witch® Models R60, R65, 5010, 5110, RT55, 6510,
7510, RT75, 7610, 8020, RT95, RT115, &
Attachments A/H400, A/H500, H700
11
12
3
15

2

9

8

10

1
7

4

13

6

5

14
16
20
18

19

17

Ref No. Part No.
1
2
3
4
5
6
N/S
N/S
N/S
7
8
9
10
11
11
11
12
13
14
15
N/S
N/S
N/S
N/S
N/S
16
17
18
19
20

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

135-911
135-910
135-921
135-901
135-902
135-903
135-904
135-905
135-906
105-319
105-320
105-326
105-327
137-411
137-410
137-412
137-401
137-404
137-405
137-402
135-961
135-962
135-979
135-977
140-120
105-372
501
502
2109-911
2108-910

Smart Pt. No.

B3067ABF00B32
B3067ABF00B08
B3067ABF00B04

Description
Cutter, L.H.
Cutter, R.H.
Spacer,Tooth 8" (3⁄8")
Adapter 10" (136-071)
Adapter 12" (136-120)
Adapter 14" (136-088)
Adapter 16"
Adapter 18" (136-089)
Adapter 20"
Bolt (3⁄4" x 11⁄2")
Bolt (3⁄4" x 21⁄4")
Bolt (3⁄4" x 3")
Bolt (3⁄4" x 4")
ABF Chain 16' Less Teeth
ABF Chain 4' Less Teeth
ABF Chain 2' Less Teeth
Chain Pin
Roller Link
Connecting Link
Key
Chain Spacer – .8"
Chain Spacer – 1.9"
Chain Spacer – 2.16"
Chain Spacer – 2.34"
Boom Gussets
Lock Nut (3⁄4")
Ground Breaker, L.H.
Ground Breaker, R.H.
Super Tooth, L.H.
Super Tooth, R.H.

Ballantine, Inc. • Ditch Witch

®

Weight (lbs)
2.14
2.14
.75
8
9.3
10.75
12
13.47
14.84
.25
.25
.45
.6
269
67.2
33.6
.5
4.25
51
.05

.10
1.3
1.3
3.5
3.5

Replacement Par ts • Page 40

Boom Parts, Sprockets, Bearings, and Accessories
for Ditch Witch® Models R40, R60, R65, 4010, 5010,
6510, 7510, 7610, 8020 & Attachments A/H400,
A/H500, H700
3

1

2
4
7

9

6
8

19

13

10

12
14

18
17

5

11

20

22

21
24

23
16

15

Ref No. Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

*

N/S

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

140-013
140-021
140-758
180-440
105-377
140-723
140-656
180-244
180-243
180-026
155-843
125-265
125-266
115-470
180-441
150-191
150-340
150-058
155-711
155-712
115-001
105-367
105-419
140-730
140-731A
142-756
142-756A
140-661
140-120

Description
Boom Sleeve
Boom Spring
Slide & Stop
Idler Shaft (Slide & Stop)
Nut
Idler Sprocket (Bearing Kit for Idler Sprocket: see * below)
Idler Sprocket Assy, (Includes Sprocket & #’s 7-13)
Spacer Bearing
Spacer Bearing
Fiber Spacer
Seal
Bearing
Race
Retaining Ring
Idler Shaft (Boom – Idler)
Grease Cylinder Barrel
Grease Cylinder Rod
Grease Cylinder Assembly
O Ring
Back-up Ring
Zerk (1⁄8")
Lock Nut (1" NC)
Bolt (1" NC X 4")
Idler Sprocket (2" P)
Idler Sprocket Assembly (14T) (140-659)
17" End Roller
17" End Roller Assembly
Bearing Kit (includes Reference #’s 7-13)
Boom Gussets

Weight (lbs)
.5
.80
25.60
3
.50
26.50
24.75
.10
.31
.10
.15
1
.6
.01
2.75
3.50
5.10
11
.03
.1
.06
.25
1.13

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 41

Auger Parts & Accessories for Ditch Witch®
Models R40, R60, R65, 4010, 5010, 6510, 7510,
8020 & Attachments A/H400, A/H500, H700 (3" P)
1

2

5
10
9

4

3

7
8

6
11
12
13

16

14
15

20

19

17

21

18

Ref No. Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

145-070
145-071
145-109
145-110
105-407
105-357
115-001
125-517
105-466
105-372
105-384
140-725
142-008
165-368
145-244
140-665
110-363
110-364
125-620
125-048
145-248

Description

Weight (lbs)

Auger, R.H. (24")
Auger, L.H. (24")
Auger, R.H. (12")
Auger, L.H. (12")
Bolt, (5⁄8" x 4")
Lock Nut (5⁄8")
Zerk
Pillow Block Bearing, 13⁄4" I.D.
Bolt (3⁄4" x 2 1/2")
Lock Nut (3⁄4")
Washer (3⁄4")
Auger Sprocket & Shaft
Auger Sprocket
Auger Shaft
Hex Auger Shaft
Auger Sprocket, Hex
Flange (LS)
Flange (NLS)
Hex Bearing Assembly
Hex Bearing
Hex Sprocket Hub

Ballantine, Inc. • Ditch Witch

®

53
53
28
28
.50
.06
.06
10.5
.5
.06
.06
35.0
23.9
15

Replacement Par ts • Page 42

Drive Sprocket Head Shaft, Components for Ditch
Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510,
7610, 8020 & Attachments A/H400, A/H500, H700
4

2

5

1

6
3
12
7

13

10

17

8

11

14
9

15
16

18

21

19
20

Ref No. Part No.
1
2
3
4
5
6
7
8
9
10
N/S
11
N/S
N/S
12
13
14
15
16
17
18
19
20
21

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

180-055
140-717
105-302
180-057
155-703
145-475
155-805
125-259
125-258
180-071
145-476
105-384
105-364
180-064
165-329
165-903
165-904
165-905
165-907
175-604
115-003
105-313
180-062
141-589

Description
Sprocket Hub
Split Sprocket
Bolt 5⁄8" x 2"
Spacer Seal
O Ring
Washer
Seal
Bearings
Race
Backup Ring
Washer
3⁄4" Washer
Bolt 3⁄4" X 2"
Washer 13⁄16" I.D. x 3" O.D. x 1⁄2"
Drive Shaft
Key (5⁄8" Sq. x 43⁄8" Lg.)
Key (5⁄8" Sq. x 37⁄8" Lg.)
Key (3⁄4" X 5⁄8" x 31⁄4")
Key (5⁄8" R2 x 3⁄8")
Sprocket (100 Q 32)
Zerk (1⁄4 N.F. Str.)
Nut
Dirt Shield
Sprocket Split Drive 11 Tooth
RT75, RT95, RT115 (Attachments: H910, H911, M910)

Weight (lbs)
3.5
15
.25
2.0
.06
.03
.25
1.5
1
.13
.20
.06
.25
.62
38
.25
.25
.25
.10
26.5
.03
.19
.19

continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 43

Drive Sprocket Head Shaft, Components for Ditch
Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510,
7610, 8020 & Attachments A/H400, A/H500, H700,
continued

22
21

24

23

25

26

Ref No. Part No.
21
22
N/S
N/S
N/S
N/S
23
24
N/S
25
N/S
26

B
B
B
B
B
B
B
B
B
B
B
B

125-209
175-605
175-608
130-404
130-402
130-401
170-038
170-059
170-609
142-009
175-509
165-379

Description

Weight (lbs)

Bearing Assembly
Sprocket (100-B14)
Sprocket Assembly
Chain (100-65 Pitches)
Offset Link
Connector Link
Power Band V Belts — 2 Belts
Power Band V Belts — 4 Belts
Sprocket #100 Q 34
Sprocket (1 Piece)
Idler Sprocket #80 – 16 Tooth
Drive Shaft for offset machine

Ballantine, Inc. • Ditch Witch

®

1
4.75
6
20
.35
.25
1.85
1.96
28
16

Replacement Par ts • Page 44

Ultra Heavy-Duty Trench-ALL® 3110 Digging
Chain & Accessories (165,000# Test Chain)
Replaces 3.067" Pitch Chain
1

3

2

4

5
6

11

8
7

10
9

Ref No. Part No.
1
2
3
4
5
6
7
8
9
10
11

TA 3110
TA 3110
TA 3110
TA 3110
TA 3110
TA 3110
TA 4134
TA 4134
TA 4134
TA 4134
SP 200

PC
CT
RL
RPL
CL
L
R
LPL
LPR

Smart Pt. No.

Description

TA311000B__

Bare Chain
Chain Pin w/Cotter
Cotter Only
Roller Link
Repair Link
Conn. Link
Cup Cutter, L.H.
Cup Cutter, R.H.
Cup Cutter L.H. (Low Profile)
Cup Cutter R.H. (Low Profile)
2" Alloy Tube Spacer

Weight (lbs)

Note: No sprocket conversion required.

continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 45

Ultra Heavy-Duty Trench-ALL® 3110 Digging
Chain & Accessories (165,000# Test Chain)
Replaces 3.067" Pitch Chain, continued

14
12

20
19

13

15

18
17

16

22

24

23

21

Ref No. Part No.
12
13
14
15
16
17
18
19
20
21
22
23
24

SP 238
SP 218
34 FW
34 LW
34 LN
34412-8
34500-8
34512-8
34600-8
PL 4134-12
PL 4134-14
PL 4134-16
BL 3110-10

Smart Pt. No.

Description

Weight (lbs)

23⁄8" Alloy Tube Spacer
21⁄8" Alloy Tube Spacer
3⁄4" Flat Washer
3⁄4" Lock Washer
3⁄4" Lock Nut
3⁄4" x 41⁄2" Gr. 8 Bolt
3⁄4" x 5" Gr. 8 Bolt
3⁄4" x 51⁄2" Gr. 8 Bolt
3⁄4" x 6" Gr. 8 Bolt
12" Cup Cutter Expander
14" Cup Cutter Expander
16" Cup Cutter Expander
Block Spacer – Space for 2" Additional Cut

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 46

Chains for Ditch Witch® Models
R100, AR12, RT115
(Largest Riding Trenchers)

1

2

Ref No. Part No.
1
1
2
2

B 135-812
B 135-808
N/A
N/A

Smart Pt. No.

Description

B450000B24
B450000B06
TA408600B26
TA408600B07

150,000
150,000
225,000
225,000

Lb. Chain, Bare, 18', 48 pitches, (2P)
Lb. Chain, Bare, 4.5'’, 12 pitches, (2P)
Lb. Chain, Bare, 18', 52 pitches, (2P)
Lb. Chain, Bare, 4.5', 14 pitches, (2P)

Weight (lbs)
360
90

Note: The Trench-All® Chain lines are specifically engineered for today’s higher horsepower
trenchers and their roller style booms.
All Trench-All® Chains are extra heavy duty anti back-flex chains with raised rivet design.

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 47

Chain,Teeth & Adapters (4.5" Pitch, 150,000#
Test Chain) for Ditch Witch® Model R100, AR12
1

6
2

8

7
4
3

5
10

9
12
11

13

16
15
14

Ref No. Part No.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

B 135-812
B 135-808
B 105-372
B 105-383
B 105-464
B 105-473
B 135-801
B 135-802
B 135-805
R100CL
B 136-009
B 136-045
B 136-046
B 136-064
B 136-010
B 136-012
B 136-014

Smart Pt. No.

Description

B450000B24
B450000B06

18' Chain, Bare
4' 6" Chain, Bare
Locknut (3⁄4")
Bolt (3⁄4" x 6")
Bolt (3⁄4" x 7")
Bolt (3⁄4" x 5")
Chain Pin
Lock Key
Roller Link
Conn. Link
Tooth Spacer (2 pcs. = 10" Width • 4 pcs. - 12" Width)
Cutter, L.H.
Cutter, R.H.
Chain Spacer
14" - 16" Adapter
18" - 20" Adapter
22" - 24" Adapter

Ballantine, Inc. • Ditch Witch

®

Weight (lbs)
360
90
.10
.81
1.00
.75
.6
.05
5.5
2.29
6.5
6.5
.3

Replacement Par ts • Page 48

Boom Sprockets, Auger Sprockets, and Drive
Sprockets and Accessories for Ditch Witch®
Model R100, AR12

3

2

1

4

5
7

6

9
8

11
12

10

15
13

Ref No.

1
N/S
2
3
4
5
6
7
8
9
10
11
N/S
12
N/S
13
14
15
N/S
N/S
N/S

14

Part No.

Description

B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

Idler Sprocket
Idler Sprocket Assembly
Snap Ring
Snap Ring
Bearing
Races
Urethane Spacer
Seals
Seal Ring
Idler Shaft
Nut
Split Drive Sprocket (4.5"P Chain)
Split Drive Sprocket (3"P Chain)
Auger Sprocket & Shaft (4.5"P Chain)
Auger Sprocket & Shaft (3"P Chain)
Pillow Block Bearing (21⁄4" I.D.)
Bolt (5⁄8" X 3")
Locknut (5⁄8")
Chain #100-2 96P (used with Auger Setup)
Chain #100-2 120P (used with Conveyor Setup)
Belt Set of 4

142-001
140-658
115-498
115-492
125-287
125-288
145-475
155-870
180-165
183-064
105-377
140-739
140-747
140-742
140-749
125-514
105-376
105-357
130-412
130-413
170-052

Weight (lbs)

71.5
84
.05
.06
2.50
1.19
.03
.25
.5
4.50
.50
63
102
14.5
.25
.06

6

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 49

Ultra Heavy-Duty Trench-ALL® 4086 Digging
Chain & Accessories (225,000# Test Chain)
Replaces 41⁄2" Pitch – 150,000# Test Chain

1

3
2

4

5

9

11

12
10

Ref No. Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13

TA 4086
TA 4086 RL
TA 4086 RPL
TA 4086 PC
TA 4134 L
TA 4134 R
B 136-045
B 136-046
SP 2116
SP 2716
SP 238
SP 11516
34 FW

8

7

6

Smart Pt. No.

Description

TA408600B_ _

Bare Chain
Roller Link
Repair Link
Chain Pin with keeper
Cutter L.H.
Cutter R.H.
Cutter, L.H.
Cutter, R.H.
21⁄16” Alloy Tube Spacer
27⁄16” Alloy Tube Spacer
23/8” Alloy Tube Spacer
115⁄16” Alloy Tube Spacer
3⁄4” Flat Washer

13

Weight (lbs)

continued on next page
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 50

Ultra Heavy-Duty Trench-ALL® 4086 Digging Chain
& Accessories (225,000# Test Chain) Replaces 41⁄2"
Pitch – 150,000# Test Chain, continued

18

19

14
16

17

15

20
21

22

Ref No. Part No.
14
15
16
17
18
19
N/S
20
21
22
23
N/S
N/S
N/S
N/S

34 LW
34 LN
34412-8
34500-8
34512-8
34600-8
34 HCCBS
H 180 L
H 180 R
H 290 L
H 290 R
H 345 L
H 345 R
H 400 L
H 400 R

23

Description

Weight (lbs)

3⁄4”

Lock Washer
3⁄4” Lock Nut
3⁄4” x 4 1⁄2" Gr. 8 Bolt
3⁄4” x 5" Gr. 8 Bolt
3⁄4” x 51⁄2" Gr. 8 Bolt
3⁄4” x 6" Gr. 8 Bolt
3⁄4” Bolt Seat for 100MM Cup Cutter
10" Cutter, L.H.
10" Cutter, R.H.
12" Cutter, L.H.
12" Cutter, R.H.
14" Cutter, L.H.
14" Cutter, R.H.
16" Cutter, L.H.
16" Cutter, R.H.

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 51

Ultra Heavy-Duty Trench-ALL® 4086 Digging
Chain & Accessories (225,000# Test Chain) Replaces
41⁄2" Pitch – 150,000# Test Chain, continued

25

24

26

27

28

30

29

Ref No. Part No.
24
25
26
N/S
27
28
N/S
29
30

PL 4115-12
PL 4115-14
PL 4115-16
PL 4115-18
TSDW 40161D
TSDW 40162I
TSDW 40162IA
TSDW 40163A
BL 4086-10

Description

Weight (lbs)

12” Cup Cutter Expander Plate
14” Cup Cutter Expander Plate
16” Cup Cutter Expander Plate
18” Cup Cutter Expander Plate
Drive Sprocket (Split)
Idler Sprocket
Idler Sprocket Assembly
Auger Sprocket and Shaft
Block Spacer - 2” Additional Cut

Note: Sprocket conversion required

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 52

Rock & Frost Section
1

4

3

2

11
7

6

5

12

8

13

9

14

10

Ref No.

1
2
3
4
5
6
7
8
9
N/S
10
N/S
11
12
13
N/S
N/S
N/S
14

Note:

Part No.

Description

B56KRB
B43KRB
B56-B
B43-B
B56-C
B43-C
CB43-10
CB56-10
Puller
Puller
N/A
N/A
B43LH
B43LRB
B43LW
C31HD
C31
.990 CRF
B 43 CW

Carbide Tooth, Rockbuster (.765 HB)
Carbide Tooth, Rockbuster (.735 HB)
Carbide Tooth, Full Cap (.765 CB)
Carbide Tooth, Full Cap (.735 CB)
Carbide Tooth, Half Cap (.765 MB)
Carbide Tooth, Half Cap (.735 MB)
Tooth Pockets (.735 BLK)
Tooth Pockets (.765 BLK)
Tooth Puller (Standard)
Tooth Puller (Large)
Chain Installer, Small (1.654" through 2")
Chain Installer, Large (3" through 4")
Carbide Tooth 1/2 Cap w/clip (.735 MRW)
Carbide Tooth Rockbuster w/Clip (.735 HR)
Lock Washers (K 91)
Carbide Tooth, Rockbuster (.990 HB)
Carbide Tooth, Half Cap (.990 MB)
Carbide Tooth, Full Cap with Flared Shoulder
Clip Wrench

Weight (lbs)

We have all styles and sizes of Carbide Bits

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 53

Terminator®, Alligator and Bolt-on
Rock & Frost Chain,Teeth & Adapters for
Ditch Witch® Walk Along Models Using
1.654" Pitch Chain & Accessories
3

4

1
5

2

14

13
15
12

7

16

26

11

10

9

8

6

17

18

25
23
21

20

19

24

22

27

28

Ref No.

Part No.

Smart Pt. No.

Description

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

N/A
N/A
B 135-316
B 135-317
B 135-318
B17
B17-D
B17-10
T165404C
T165404L
T165404R
TT1654
B 135-319
B 135-320
B 135-936
B 135-937
B 135-938
B 136-027
B 136-029
B 105-162
B 105-915
B 105-916
B 105-917
38LW
B 105-047
B 105-101
B 059-360
B 135-001

SH16540426
AL16540426

1.654”P Welded Terminator Chain, 4” Cut, 26 Stations
1.654”P Welded Alligator Chain, 4” Cut, 26 Stations
Bit Adapter Center
Bit Adapter L.H.
Bit Adapter R.H.
Carbide Bit
Lockwasher
Tooth Holder
Terminator Adapter, Center
Terminator Adapter, L.H.
Terminator Adapter, R.H.
Terminator Tooth Only
Tubular Spacer (Used with Bit Adapter on Inside)
Tubular Spacer (Used with Bit Adapter on Outside)
Flat Spacer (3⁄8") (28,000 Lb. - Chain Only)
5" Flat Spacer (28,000 Lb. Chain Only)
6" Flat Spacer (28,000 Lb. Chain Only)
5" Flat Spacer (34,000 & 38,000 Lb. Chain)
6" Flat Spacer (34,000 & 38,000 Lb. Chain)
Bolt 3⁄8" x 21⁄4" Used with Bit Adapter on Inside
Bolt 3⁄8" x 23⁄4" Used with Bit Adapter on Outside
Bolt 3⁄8" x 41⁄2" Used with Spacer for 5" Cut
Bolt 3⁄8" x 51⁄2" Used with Spacer for 6" Cut
Lock Washer 3⁄8"
Locknut 3⁄8"
Flat Washer 3⁄8"
Half Link with Connecting Pin (28,000 Lb. Chain Only)
Connector Pin with Keeper (All Chains)

Note:

Weight (lbs)

.5
.5
.5
.2
.02
.75
.75
.75
.3

For additional bare chain components, see walk-along section.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 54

Terminator®, Alligator and Bolt-on Rock & Frost
Chain,Teeth & Adapters (2" Pitch, 50,000 Lb.Test
Chain) for Ditch Witch® Models V30, R30, 2300, 2200,
2310, R40, J20, 3500, 3610, 3700, R40, 4500, 4010

1

2

3

4

6

5

11

7
9
8

10
13

Ref No.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

12

14

15

Part No.

Smart Pt. No.

Description

N/A
N/A
T 20034
T 20078
765 BLK
765 HDBLK
B 105-065
B 105-076
B 105-110
B 105-111
B 135-952
B 135-043
B 135-958
B 135-959
B 135-058

SH20000636
AL200006D36

2” P Welded Terminator Chain, 6” Cut, 36 Stations
2” P Welded Alligator Chain, 6” Cut, 36 Stations
Terminator Tooth, 3⁄4”V-Carbide
Terminator Tooth, 7/8”V-Carbide
Tooth Holder
Heavy-Duty Tooth Holder
1⁄2" Locknut
(1⁄2" x 3") Bolt
(1⁄2" x 41⁄2") Bolt
(1⁄2" x 4") Bolt
Chain Spacer (Used with Bit Adapter on Outside)
Chain Spacer (Used with Bit Adapter on Inside)
Carbide Bit Half Cap (B56-C) (765 MB)
Carbide Bit Full Cap (B56-B) (765 CB)
Carbide Rockbuster (CB56KRB) (765 HB)

Weight (lbs)

.8
.85
.8
1.0

.5
.5
.5

continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 55

Terminator®, Alligator and Bolt-on Rock & Frost Chain,
Teeth & Adapters (2" Pitch, 50,000 Lb.Test Chain) for
Ditch Witch® Models V30, R30, 2300, 2200, 2310, R40,
J20, 3500, 3610, 3700, R40, 4500, 4010, continued

17

18

19

16

20

21

24

23

22

25

26
27

Ref No.

Part No.

16
17
18
19
20
21
22
23
24
25
26
27
N/S
N/S

B 136-036
B 136-037
B 136-038
B 136-039
B 136-041
B 136-040
T 20004L
T 20004R
T 20005L
T 20005R
T 20006L
T 20006R
T 20008L
T 20008R

Note:

Smart Pt. No.

Description

Weight (lbs)

Bit Adapter (Less Bit) R.H. Center - Through 4"
Bit Adapter (Less Bit) L.H. Center - Through 4"
Bit Adapter (Less Bit) L.H. 5"
Bit Adapter (Less Bit) R.H. 5"
Bit Adapter (Less Bit) L.H. 6"
Bit Adapter (Less Bit) R.H. 6"
Terminator Adapter, L.H. C-4”
Terminator Adapter, R.H. C-4”
Terminator Adapter, L.H. 5”
Terminator Adapter, R.H. 5”
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”

2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3

For additional bare chain components, see 2” pitch chain section.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 56

Terminator®, Alligator and Bolt-on Rock & Frost
2" Pitch Anti-Back Flex Chain,Teeth & Adapters for
Ditch Witch® Models V30, R30, 2300, 2310, R40, 4010,
5010, 3500, 2200, 3610, 3700, 4500

1

2

4

3

13

14

15

6

5

11

Ref No.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

9
7

8

10

12

Part No.

Smart Pt. No.

Description

N/A
N/A
T 20034
T 20078
765 BLK
765 HDBLK
B 105-065
B 105-076
B 105-110
B 105-111
B 135-952
B 135-043
B 135-958
B 135-959
B 135-058

SH20000636
AL200006D36

2” P Welded Terminator Chain, 6” Cut, 36 Stations
2” P Welded Alligator Chain, 6” Cut, 36 Stations
Terminator Tooth, 3⁄4”V-Carbide
Terminator Tooth, 7/8”V-Carbide
Tooth Holder
Heavy-Duty Tooth Holder
1⁄2" Locknut
(1⁄2" x 3") Bolt
(1⁄2" x 41⁄2") Bolt
(1⁄2" x 4") Bolt
Chain Spacer (Used with Bit Adapter on Outside)
Chain Spacer (Used with Bit Adapter on Inside)
Carbide Bit Half Cap (B56-C) (765 MB)
Carbide Bit Full Cap (B56-B) (765 CB)
Carbide Rockbuster (CB56KRB) (765 HB)

Weight (lbs)

.8
.85
.8
1.0

.5
.5
.5

continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 57

Terminator®, Alligator and Bolt-on Rock & Frost 2"
Pitch Anti-Back Flex Chain,Teeth & Adapters for
Ditch Witch® Models V30, R30, 2300, 2310, R40, 4010,
5010, 3500, 2200, 3610, 3700, 4500, continued

16

17

18

21

20

22

24

16
17
18
19
20
21
22
23
24
25
26
27
N/S
N/S

Note:

B 136-036
B 136-037
B 136-038
B 136-039
B 136-040
B 136-041
T 20004L
T 20004R
T 20005L
T 20005R
T 20006L
T 20006R
T 20008L
T 20008R

23

26

25

Ref No. Part No.

19

27

Description

Weight (lbs)

Bit Adapter (Less Bit) R.H. Center - Through 4"
Bit Adapter (Less Bit) L.H. Center - Through 4"
Bit Adapter (Less Bit) L.H. 5"
Bit Adapter (Less Bit) R.H. 5"
Bit Adapter (Less Bit) R.H. 6"
Bit Adapter (Less Bit) L.H. 6"
Terminator Adapter, L.H. C-4”
Terminator Adapter, R.H. C-4”
Terminator Adapter, L.H. 5”
Terminator Adapter, R.H. 5”
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”

2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3

For additional bare chain components, see 2” pitch ABF chain section.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 58

Terminator®, Alligator and Bolt-on Rock & Frost
Chain,Teeth & Adapters for Ditch Witch® Models
R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020
Using 3.067"P Chain

1

2

7
3

4

11
5

Ref No.

1
2
3
4
5
6
7
8
9
10
11
12
13

8

10

6

12

13

9

Part No.

Smart Pt. No.

Description

N/A
N/A
T 20034
T 20078
765 BLK
765 HDBLK
B 105-322
B 105-365
B 105-372
B 105-111
B 135-958
B 135-959
B 135-058

SH3067HD0632
AL30670632

3”P, 110,000 Lb. Welded Terminator Chain, 6” Cut, 32 Sta.
3”P, 110,000 Lb. Welded Alligator Chain, 6” Cut, 32 Sta.
Terminator Tooth, 3⁄4" V-Carbide
Terminator Tooth, 7⁄8" V-Carbide
Tooth Holder
Heavy Duty Tooth Holder
Bolt (3⁄4" x 51⁄2")
Bolt (3⁄4" x 4")
Locknut (3⁄4")
Bolt (3⁄4" x 41⁄2")
Carbide Bit Half Cap (B56-C) (765 MB)
Carbide Bit Full Cap (B56-B) (765 CB)
Carbide Bit Rockbuster (CB56KRB) (765 HB)

Weight (lbs)

.8
.85
.8
1.

continued on next page

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 59

Terminator®, Alligator and Bolt-on Rock & Frost
Chain,Teeth & Adapters for Ditch Witch® Models
R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020
Using 3.067"P Chain, continued

15

14

16

17

20

18

21

19

22

Ref No.

14
15
16
17
18
19
20
21
22
23
24
N/S
N/S

Note:

23

24

Part No.

Description

B 135-973
B 135-974
B 135-975
B 135-976
T 306706L
T 306706R
T 306708L
T 306708R
B 105-373
B 135-977
B 135-978
B 135-979
B 135-980

Bit Adapter (Less Teeth) L.H. 8" Cut
Bit Adapter (Less Teeth) R.H. 8" Cut
Bit Adapter (Less Teeth) R.H. cc - 6"
Bit Adapter (Less Teeth) L.H. cc - 6"
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”
Bolt ( 3⁄4" x 5")
Chain Spacer, Outside (110,000 Lb.)
Chain Spacer, Inside (110,000 Lb.)
Chain Spacer, Outside (70,000 Lb.)
Chain Spacer, Inside (70,000 Lb.)

Weight (lbs)

For additional bare chain components, see pages 42 and 43.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 60

Terminator®, Alligator and Bolt-on Rock & Frost
3.067" Pitch Anti-Back Flex Chain,Teeth & Adapters
for Ditch Witch® Models R60, R65, R6510, R40, 4010,
5010, 7510, 7610, 8020 & Attachments A/H500, A/H700
8

7

10

1

9
3

2

11
6

13

12

18

5

4

19

15

14
23

20

22
16

Ref No.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

Note:

21

17

Part No.

Smart Pt. No.

N/A
N/A
T 20034
T 20078
765 BLK
765 HDBLK
B 105-322
B 105-365
B 105-372
B 105-373
B 135-958
B 135-959
B 135-058
B 135-973
B 135-974
B 135-975
B 135-976
T 306706L
T 306706R
T 306708L
T 306708R
B 135-977
B 135-978

SH3067ABF06D32 ABF, 110,000# Welded Terminator, 6” Cut, 32 Stations
AL3067ABF06D32 ABF, 110,000# Welded Alligator, 6” Cut, 32 Stations
Terminator Tooth, 3⁄4" V-Carbide
Terminator Tooth, 7⁄8" V-Carbide
Tooth Holder
Heavy Duty Tooth Holder
Bolt (3⁄4" x 51⁄2") Used with Two Outside Bit Adapters
Bolt (3⁄4" x 4") Used with Inside Bit Adapter
Locknut (3⁄4")
Bolt (3⁄4" x 5") Used with Outside Bit Adapter
Carbide Bit Half Cap (B56-C) (765 MB)
Carbide Bit Full Cap (B56-B) (765 CB)
Carbide Rockbuster (CB56KRB) (765 HB)
Bit Adapter L.H. 8"
Bit Adapter R.H. 8"
Bit Adapter R.H. Center through 6" Cut
Bit Adapter L.H. Center through 6" Cut
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”
Chain Spacer (Used with Bit Adapter on Outside)
Chain Spacer (Used with Bit Adapter on Inside)

Description

Weight (lbs)

.8
.85
.8
1.

For additional bare chain components, see page 44.

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 61

H-Plate,Terminator®, and Bolt-on Rock & Frost
Chain,Teeth and Adapters for TA3110 Ultra
Heavy-Duty Chain (165,000# Test Chain)
Replaces all 3"P Chains
3

5

6

1
4

7
9

2

8

11

10

14
16

17

15

18
12

13

Ref No. Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

N/A
N/A
B 43 LH
B 43 LC
B 43 LRB
765 CRFN
B 43 CW
TA 4134 LPL
TA 4134 LPR
H 75-6L
H 75-6R
H 75-8L
H 75-8R
T 20034
T 20078
T 306706L
T 306706R
T 306708L
T 306708R

Note:

Smart Pt. No.

Description

TA311006H32
SH31100632

Welded H-Plate Chain, 6” Cut, 32 Stations
Welded Terminator Chain, 6” Cut, 32 Stations
Carbide Tooth with clip (735MRW)
Lock Clip Only (K91)
Rockbuster Bit with clip
Full Cap Carbide Bit with clip
Clip Wrench
Cutter, L.H., Low-profile
Cutter, R.H., Low-profile
Carbide Holder, L.H. 6”
Carbide Holder, R.H. 6”
Carbide Holder, L.H. 8”
Carbide Holder, R.H. 8”
Terminator Tooth, 3⁄4" V-Carbide
Terminator Tooth, 7⁄8" V-Carbide
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”

19

Weight (lbs)

.8
.85

For additional bare chain components, see page 49.
continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 62

H-Plate,Terminator®, and Bolt-on Rock & Frost
Chain,Teeth and Adapters for TA3110 Ultra
Heavy-Duty Chain (165,000# Test Chain)
Replaces all 3"P Chains, continued

21

20

32

22
31
30
29

24

23

25

27

26

33

35

34

Ref No. Part No.
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37

TP 17
SP 1916
SP 178
SP 200
SP 238
SP 218
34 FW
34 LW
34 LN
34412-8
34500-8
34512-8
34600-8
PL 75-10
PL 75-12
PL 75-14
PL 75-16
BL 3110-10

37

28

Description

36

Weight (lbs)

Heat Treated Tooth Pocket
19⁄16" Alloy Tube Spacer
17⁄8" Alloy Tube Spacer
2” Alloy Tube Spacer
23⁄8" Alloy Tube Spacer
21⁄8" Alloy Tube Spacer
3⁄4" Flat Washer
3⁄4" Lock Washer
3⁄4" Lock Nut
3⁄4" x 41⁄2" Gr. 8 Bolt
3⁄4" x 5” Gr. 8 Bolt
3⁄4" x 51⁄2" Gr. 8 Bolt
3⁄4" x 6” Gr. 8 Bolt
10” Carbide Expander
12” Carbide Expander
14” Carbide Expander
16” Carbide Expander
Block Spacer - Space for 2” Additional Cut

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 63

Alligator and Bolt-on Rock & Frost
Chain,Teeth & Adapters (41⁄2" Pitch
150,000# Test Chain) for Ditch Witch®
Models R100, AR12, R150

1

2

5
8
6

9

4

3

10

12

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

11

13

Ref No.

7

17

16

15

14

Part No.

Smart Pt. No.

Description

N/A
B 135-812
B 105-372
B 105-499
B 135-801
B 135-802
B 135-805
R 100CL
B 136-100
B 136-101
B 136-102
B 136-060
B 136-061
B 136-062
B 136-063
765 BLK
765 HDBLK

AL450008D24
B450000B24

Welded Alligator Chain, 8” Cut, 24 Stations
18'0" Chain, Bare
Locknut (3⁄4" N.C.)
Bolt (3⁄4" x 13⁄4")
Chain Pin
Key
Roller Link
Conn. Link
Carbide Bit (Full Cap) (765 CB)
Carbide Bit (Half Cap) (765 MB)
Carbide Bit (Rock Buster) (765 HB)
Bit Adapter (Position 1)
Bit Adapter (Position 2)
Bit Adapter (Position 3)
Bit Adapter (Position 4)
Tooth Holder
Heavy Duty Tooth Holder

Weight (lbs)

360

.8
1.0

Note: MTO adapters can be manufactured upon request.
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 64

H-Plate,Terminator® and Bolt-on Rock & Frost
Chain,Teeth and Adapters for Ditch Witch®
Models R100, AR12, R150 using TA4086 Chain
(225,000# Test) replaces 4.5" 150,000 Chains

1

2

11

10
9

3

4

Ref No. Part No.
1
2
3
4
5
6
7
8
9
10
11
N/S
N/S
N/S
N/S
N/S

Note:

N/A
N/A
B 43 LH
B 43 LRB
765 CRFN
B 43 LC
B 43 CW
TP 17
PL 75-12
PL 75-14
PL 75-16
PL 75-18
H 300-10L
H 300-10R
H 300-12L
H 300-12R

5

6

8

7

Smart Pt. No.

Description

TA408608H26
TA408600B26

4.086”P Welded H-Plate Chain, 8” Cut, 26 Stations
4.086”P Chain, Bare, 26 Stations
Carbide Tooth with clip (735 MRW)
Carbide Tooth with clip (735 HR)
Carbide Tooth with clip (Full Cap)
Lock Clip Only (K91)
Clip Wrench
Heat Treated Tooth Pocket
12" Carbide Expander Plate
14" Carbide Expander Plate
16" Carbide Expander Plate
18” Carbide Expander Plate
Carbide Holder 10" Cut, L.H.
Carbide Holder 10" Cut, R.H.
Carbide Holder 12" Cut, L.H.
Carbide Holder 12" Cut, R.H.

Weight (lbs)

For additional bare chain components, see pages 54 & 55.
continued on next page

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 65

H-Plate,Terminator® and Bolt-on Rock & Frost
Chain,Teeth and Adapters for Ditch Witch® Models
R100, AR12, R150 using TA4086 Chain (225,000#
Test) replaces 4.5" 150,000 Chains, continued

13

15
14

12

17

16

21

19

18

20

23

22

25

Ref No. Part No.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26

H 75-6L
H 75-6R
H 75-8L
H 75-8R
SP 2716
SP 238
SP 11516
SP 2116
BL 4086-10
T 306706L
T 306706R
T 306708L
T 306708R
T 20034
T 20078

24

26

Description

Weight (lbs)

Carbide Holder, L.H. 6”
Carbide Holder, R.H. 6”
Carbide Holder, L.H. 8”
Carbide Holder, R.H. 8”
27⁄16” Alloy Tube Spacer
23⁄8” Alloy Tube Spacer
115⁄16” Alloy Tube Spacer
21⁄16” Alloy Tube Spacer
Block Spacer – Spacer for 2" Additional Cut
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”
Terminator Tooth, 3⁄4" V-Carbide
Terminator Tooth, 7⁄8" V-Carbide

.8
.85

continued on next page
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 66

H-Plate,Terminator® and Bolt-on Rock & Frost
Chain,Teeth and Adapters for Ditch Witch® Models
R100, AR12, R150 using TA4086 Chain (225,000#
Test) replaces 4.5" 150,000 Chains, continued

28

27

29

31

30

35
34

33
32

37

36

Ref No. Part No.
27
28
29
30
31
32
33
34
35
N/S
36
37
38
N/S
N/S

B 83 LH
B 83 LC
34 FW
34 LW
34 LN
34412-8
34500-8
34512-8
34600-8
34 TABS
PL 300-16
PL 300-18
PL 300-20
PL 300-22
PL 300-24

Description

38

Weight (lbs)

Carbide Tooth with clip
Lock Clip
3⁄4” Flat Washer
3⁄4” Lock Washer
3⁄4” Lock Nut
3⁄4” x 41/2” Gr. 8 Bolt
3⁄4” x 5” Gr. 8 Bolt
3⁄4” x 51/2” Gr. 8 Bolt
3⁄4” x 6” Gr. 8 Bolt
3⁄4” Bolt Seat for TA300 Holder
16” Carbide Expander Plate
18” Carbide Expander Plate
20” Carbide Expander Plate
22” Carbide Expander Plate
24” Carbide Expander Plate

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 67

Roller Chain Section

To Order Roller Chain
P = One Pitch

1. Measure Length of Pitch
2. Count the number of pitches or rollers

P

3. From one pin to the next pin equals one pitch
Part No.

Description

40R Cut
40CL
400L
50R Cut
50CL
500L
60R Cut
60CL
600L
60HR Cut
60HCL
60HOL
60-2R Cut
60-2CL
60-2OL
80HR Cut
80HCL
80HOL
100HR Cut
100HCL
100HOL
120R Cut
120CL
160R Cut
160CL

#40 Roller Chain, Pitch Length 1⁄2"
#40 Conn. Link
#40 Offset Link
#50 Roller Chain, Pitch Length 5⁄8"
#50 Conn. Link
#50 Offset Link
#60 Roller Chain, Pitch Length 3⁄4"
#60 Conn. Link
#60 Offset Link
#60 Heavy Roller Chain, Pitch Length 3⁄4"
#60 Heavy Conn. Link
#60 Heavy Offset Link
#60 Double Roller Chain, Pitch Length 3⁄4"
#60 Double Conn. Link
#60 Double Offset Link
#80 Heavy Roller Chain, Pitch Length 1"
#80 Heavy Conn. Link
#80 Heavy Offset Link
#100 Heavy Roller Chain, Pitch Length 11⁄4"
#100 Heavy Conn. Link
#100 Heavy Offset Link
#120 Roller Chain, Pitch Length 11⁄2"
#120 Conn. Link
#160 Roller Chain, Pitch Length 2"
#160 Conn. Link

We stock nearly every size of Roller Chain.
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 68

Notes

Notes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Ballantine, Inc. • Ditch Witch

®

Replacement Par ts

Warning
!
▲
Use Care To Prevent Injury
Comply with the Following to
Avoid Serious Personal Injury
1.

Guards must be provided on all chain and sprocket installations in accordance with provisions of ANSI/ASME B15.1 - 1996 “Safety Standards for
Mechanical Power Transmission Apparatus,” and ANSI/ASME B20.1 1996 “Safety Standards for Conveyors and Related Equipment,” or other
applicable safety standards. When revisions of these standards are published, the updated edition shall apply.

2.

Always lock out power switch before installing, removing, lubricating or
servicing a chain system.

3.

When connecting or disconnecting chain:
a.
Eye protection is required. Wear safety glasses, protective clothing, gloves, and safety shoes.
b.

Support the chain to prevent uncontrolled movement of chain
and parts.

c.

Use of pressing equipment is recommended. Tools must be in
good condition and properly used.

d.

Determine correct direction for pin/rivet removal or insertion.

Warning
!
▲
Use Care To Prevent Injury
Comply with the Following to
Avoid Serious Personal Injury
1.

Guards must be provided on all chain and sprocket installations in accordance with provisions of ANSI/ASME B15.1 - 1996 “Safety Standards for
Mechanical Power Transmission Apparatus,” and ANSI/ASME B20.1 1996 “Safety Standards for Conveyors and Related Equipment,” or other
applicable safety standards. When revisions of these standards are published, the updated edition shall apply.

2.

Always lock out power switch before installing, removing, lubricating or
servicing a chain system.

3.

When connecting or disconnecting chain:
a.
Eye protection is required. Wear safety glasses, protective clothing,
gloves, and safety shoes.
b.

Support the chain to prevent uncontrolled movement of chain and
parts.

c.

Use of pressing equipment is recommended. Tools must be in
good condition and properly used.

d.

Determine correct direction for pin/rivet removal or insertion.

Part No.T01101

©Ballantine, Inc. 2008
All Rights Reserved



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Modify Date                     : 2008:10:16 12:33:28-05:00
Create Date                     : 2008:10:16 10:35:39-05:00
Metadata Date                   : 2008:10:16 12:33:28-05:00
Creator Tool                    : QuarkXPress(R) 7.3
Format                          : application/pdf
Title                           : Ballantine
Document ID                     : uuid:069494f4-9b98-11dd-89a9-0016cbca683c
Instance ID                     : uuid:8bab7a62-9ba8-11dd-89a9-0016cbca683c
Producer                        : QuarkXPress(R) 7.3
Page Count                      : 77
Creator                         : QuarkXPress(R) 7.3
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments

EXIF Metadata provided by EXIF.tools