File EML 101 Schematic Re Draw ( 1 )

EML 101 Schematic Re-Draw ( 1 ) EML 101 Schematic Re-Draw ( 1 )

EML 101 Schematic Re-Draw ( 1 ) EML 101 Schematic Re-Draw ( 1 )

User Manual: EML 101 Schematic Re-Draw ( 1 )

Open the PDF directly: View PDF .
Page Count: 6

file:///C|/my_stuff/museum/PDF/ElectroComp/eml_101.txt

This is a rough draft of the first ever ElectroComp 100/101 service manual.

I am trying to do this with no time to do it in, so it is very slow.

I have tried to make the pages so they print on either American "A" size

or Euro "A4" size paper. Many of the modules have not been digitized yet,

since I basically have to place each compnent on the paper and connect it up

and label it. The result is perfectly legible text, especially when blown

up! Enjoy!

David Hillel Wilson

Curator

New England Synthesizer Museum

DWilSynth@aol.com

www.synthmuseum.com/nesm

Special thanks to AutoDESK for donating AutoCAD.

Special thanks to Jeff J. Murray (former co-owner of EML) for suppling some

of the EML schematics.

Special thanks to an unnamed dealer for supplying other EML schematics.

file:///C|/my_stuff/museum/PDF/ElectroComp/eml_101.txt5/28/2007 11:48:11 PM