ES100_Data_Sheet_ ES100_Data_Sheet ES100 Data Sheet
ES100-Data-Sheet ES100-Data-Sheet
ES100_Data_Sheet ES100_Data_Sheet
User Manual: ES100_Data_Sheet
Open the PDF directly: View PDF 
.
Page Count: 2
ES100 Series Electric Strike
Trimec®, School Street, Willenhall, West Midlands WV13 3PW United Kingdom
Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837
Fax: +44(0) 845 873 4839 Email: info@trimec-online.co.uk Web: www.trimec.com.au
July 2011 © Trimec.
All dimensions are nominal
and subject to tolerances.
General Description
The ES100 is a cost efficient robust electric strike
with a solid construction of one-piece cast
aluminium body and stainless steel striker. The
ES100 offers the same level of security and
reliability usually provided by more expensive
electric locking solutions.
Extension lips are available to accommodate the
installation of electric strikes on door frames
with different thickness. The ES100 product
range of patented electric strikes are suitable for
use with all access control installations where
flexibility, security and lower cost are required.
Key Features
•Fail safe/fail secure changeable on site
•Stainless steel striker for extra strength
and durability
•Stainless steel locking pins
•Available in 12 or 24Vdc
•Optional mounting kit
•Installation template
•IP56 weather resistant model as standard
•Suitable For 15mm latch with a 3mm door gap
•5 Year Warranty
Applications
•Exposed areas
•High traffic areas
•Open in/open out doors
•Suitable for use with all access control systems
Standards and Compliance
Approved to UL1034 (highest level)
CE Approved
Trimec®, School Street, Willenhall, West Midlands WV13 3PW United Kingdom
Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837
Fax: +44(0) 845 873 4839 Email: info@trimec-online.co.uk Web: www.trimec.com.au
July 2011 © Trimec.
All dimensions are nominal
and subject to tolerances.
86mm
123.7mm
32mm
m
43mm
32mm
123.7mm
86mm
43mm
123.7mm
86mm
32mm
43mm
50mm
25mm
15mm
30mm
16m
m16m
m16m
ES100 with 15mm ext lip
- “A” Plate
ES100 with 25mm ext lip
- “A” Plate
ES100 with 50mm ext lip
- “A” Plate
PageSKU Short Code Description
110101-030 TRIMEC ES101-00-WR-TABS 12V PTL WR SS f/plate no lip
110101-070 TRIMEC ES101-WR-TABS 12V PTL WR SS f/plate
110103-070 TRIMEC ES103-WR-TABS 24V PTL WR SS f/plate
220200-518 TRIMEC Mounting Kit - ES100/110 Mounting tab kit for ES100/110
Extension Lips
220110-502 TRIMEC ES110 15MM Extension lip
220110-503 TRIMEC ES110 25MM Extension lip
220110-504 TRIMEC ES110 50MM Extension lip
Faceplates
210100-523 TRIMEC PL-ES1-TJAA ES110 Long rebated faceplate aluminium
210100-527 TRIMEC PL-ES1-TGAS ES110 UK sash DIN RH (LH) SS
210100-528 TRIMEC PL-ES1-TFAS ES110 UK sash DIN LH (RH) SS
210100-530 TRIMEC PL-ES1-TBBS ES110 ANSI long SS
219100-532 TRIMEC ES100 UK Sash SS Small Right ES110 Small sash DIN RH (LH) SS
219100-534 TRIMEC ES100 UK Sash SS Small Left ES110 Small sash DIN LH (RH) SS
219100-538 TRIMEC PL-ES1-TDAS RH ES110 Euro sash DIN LH (RH) SS
219100-539 TRIMEC PL-ES1-TEAS LH ES110 Euro sash DIN RH (LH) SS
Ordering Information
Specification Statement
Where Power to Lock and Power to Open
functions may be required in the same building,
the strike must be interchangeable from either
“Power to Lock” or “Power to Open” on site.
The electric strike should not consume current
greater than 243mA @ 12Vdc or 187mA @
24Vdc and have a solenoid suitable for
continuous use. Certifications must include CE.
The strike should have a minimum holding
force of 680kg, and an endurance rating
of 1 million cycles.
ES100 Series Electric Strike
ES100 Technical Information
Voltage
Current
Solenoid
Monitoring
Holding Force
Endurance
Environment
Body
Keeper
Latch
12 or 24Vdc
243 mA @ 12Vdc – 187mA @ 24Vdc
Solenoids are rated for continuous use.
None
680 kg Static Strength Rating
Cycle tested to 1,000,000 operations
Operational temperature range -20°C to + 60°C
Weather resistant construction available. (IP56)
Cast Aluminium Construction
Stainless Steel
Suit 15mm latch bolt with 3mm door gap
