ES3000_Data_Sheet_ ES3000 Data Sheet
User Manual: ES3000 Data Sheet
Open the PDF directly: View PDF 
.
Page Count: 2
ES3000 Monitored Series Electric Strike
Trimec®, School Street, Willenhall, West Midlands WV13 3PW United Kingdom
Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837
Fax: +44(0) 845 873 4839 Email: info@trimec-online.co.uk Web: www.trimec.com.au
July 2011 © Trimec.
All dimensions are nominal
and subject to tolerances.
General Description
The ES3000 series electric strikes are designed
for high security applications and manufactured
from solid stainless steel.
These long ANSI strikes offer a strong
dependable and long-lasting electric strike
solution and are suitable for use with any access
control system.
These strikes are extremely flexible and can be
changed from fail safe to fail secure and
mounted on the left or right hand side of the
door, thus reducing the amount of stock needed
to cover each application.
Key Features
•Fail safe/fail secure changeable on site
•Available in 12Vdc
•850kg holding force
•1 million cycles endurance rating
•Stainless Steel locking pins
•Continuously rated solenoid
•Optional mounting kit
•5 Year Warranty
Applications
•Timber or metal doors
•Open in/open out doors
•Suitable for use with all access control systems
Standards and Compliance
Approved to UL1034 (highest level)
CE Approved
Trimec®, School Street, Willenhall, West Midlands WV13 3PW United Kingdom
Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837
Fax: +44(0) 845 873 4839 Email: info@trimec-online.co.uk Web: www.trimec.com.au
July 2011 © Trimec.
All dimensions are nominal
and subject to tolerances.
ES3000 Monitored Series Electric Strike
Specification Statement
The strike should be constructed of solid
stainless steel, have a minimum holding force
of 850kg and have an endurance rating of 1
million cycles. Monitoring must include
independent door / latch & solenoid
monitoring. The one strike must be changeable
from fail safe to fail secure on site where
required. The strike should not consume
current greater than 175mA @ 12Vdc and have
a solenoid rated for continuous use.
Certifications must include CE.
ES3000 ANSI Extension Lip ES3000 Harcor Face Plate Wide Extension Lip
86mm
201.5mm
30.5mm
27.5mm
123mm
201.5mm
27.5mm
30.5mm
31.6mm36.3mm
11mm 11mm
SKU Short Code Description
113101-000 TRIMEC ES3101-TBBS 12V PTL ANSI Long f/plate
Ordering Information
ES3000 Technical Information
Voltage
Current
Solenoid
Monitoring
Holding Force
Endurance
Environment
Body
Keeper
Latch
12Vdc
175 mA @ 12Vdc
Solenoids rated for continuous use.
Solenoid Monitor - 1 amp NO/NC microswitch
Door / Latch - 1 amp NO/NC microswitch
850kg static strength rating
Cycle tested to 1,000,000 operations
Operational temperature range -20°C to +60°C
Solid Stainless Steel Construction
Stainless Steel
Suit 18mm latch bolt with 3mm door gap
