Electronics Assembly Manual.backup Manual
User Manual:
Open the PDF directly:
View PDF
.
Page Count: 52
Scroll down to view the document on your mobile browser.
OX CNC
1.0 Getting Started
1.1 About The Kit
1.2 Check Product Contents
1.3 Tools Required
1.4 Notes on Assembly
2.0 Drag Chains Assembly
2.1 Y-Axis
2.1.1 Y-Axis Fixed End Assembly
2.1.2 Y-Axis Fixed End Mounting
2.1.3 Y-Axis Moving End Assembly
2.1.4 Y-Axis Moving End Mounting
2.1.5 Y-Drag-Chain
2.2 X-Axis
2.2.1 X-Axis Fixed End Mounting
2.2.2 X-Axis Moving End Assembly
2.2.3 X-Axis Moving End Mounting
2.2.4 X-Drag-Chain
2.3 Wire Routing
2.3.1 3 Motor Wires
2.3.2 1 Motor Wire & PSU-Output-Power-Cables
3.0 Power Supply Assembly
3.1 Output
3.1.1 Securing XT60-Male Outputs
3.1.2 Inserting LED-Volt-Meter
3.2 Input
3.2.1 IEC-Inlet Wires
3.2.2 Attaching IEC-Inlet
3.3 Connecting PSU-Cover
3.3.1 Connecting Wires
3.3.2 Attaching PSU-Cover
3.3.3 Testing
4.0 CNC xPro Assembly
4.0.1 Terminal-Block Attachment
4.0.2 Fan Mount Assembly
4.0.3 Attaching The CNC-xPro
4.0.4 Fans Wiring
4.0.5 Mounting the CNC-xPro Assembly
5.0 Wiring & Commissioning
5.1 CNC-xPro Wiring
5.2 Software & Machine Settings
5.2.1 Installing Universal G-Code Sender (UGS)
5.2.2 Configuring The Firmware
5.3 Testing
5.4 Wire Tidying
5.5 Complete
6.0 Appendix
6.1 Appendix A - Kit Contents
7.0 Appendix B
7.1 Recommended GRBL Settings
Navigation menu
Upload a User Manual
Versions of this User Manual:
Wiki Guide
HTML
Mobile
Download & Help
Views
User Manual
Discussion / Help
Navigation