User Manual FAXPHONE L170 Basic Guide EN
User Manual: User manual Canon FAXPHONE L170 Fax User Manuals and Instruction Guides
Open the PDF directly: View PDF .Page Count: 195
FAXPHONE L170 Basic Guide
About the Manuals for the Machine
The manuals for this machine are divided as follows. Please refer to them for detailed information.
The manuals supplied with optional equipment are included in the list below.
Guides with this symbol are book manuals.
CD-ROM
• Setting up the Machine
• Installing Printer Driver
• Document and Paper Handling
• Sending and Receiving Faxes
• Speed Dialing
• Making Copies
• Maintenance
• Troubleshooting
• The Menu System
• Installing Printer Driver Software
• Printer Properties
• Troubleshooting Printer Driver Issues
Guides with this symbol are PDF manuals included on the
accompanying CD-ROM. (See footnote.)
Set-Up Instructions
Basic Guide
(This Document)
Software Guide
CD-ROM
• To view the manual in PDF format, Adobe Reader/ Acrobat Reader/Acrobat is required. If Adobe Reader/ Acrobat Reader/Acrobat is not installed on your system, please download
it from the Adobe Systems Incorporated website (http://www.adobe.com).
ii
Where to Find Help
Canon offers a full range of customer technical support* options:
• For e-mail support, the latest driver downloads and answers to frequently asked questions (www.usa.canon.com/
consumer)
• Free technical support Monday-Saturday (excluding holidays) for products still under warranty (1-800-828-4040)
• Technical support for products no longer under warranty (1-757-413-2848)
NOTE
Within Canada, call for technical support 24 hours a day, 7 days a week (1-800-263-1121).
*Support program specifics are subject to change without notice.
Where to Find Help
iii
Product Type and Model
FAXPHONE L170 : Facsimile Transceiver, Model H12425
Copyright
This Basic Guide is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this guide may not
be reproduced in any form, in whole or part, without prior written consent of Canon U.S.A.
© 2004 Canon U.S.A., Inc.
Laser Safety
This product complies with 21 CFR Chapter 1 Subchapter J as a Class I laser product under the U.S. Department of Health
and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety
Act of 1968. Class I levels of laser radiation are not considered to be hazardous.
Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser
beam cannot escape from the machine during any phase of user operation. Do not remove protective housings or external
covers, except as directed by this manual.
Disclaimer
Canon U.S.A., Inc. has reviewed this guide thoroughly in order to make it easy to use guide for your Canon FAXPHONE
L170 system. All statements, technical information, and recommendations in this guide and in any guides or related
documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are
not intended to be, nor should they be understood to be, representations or warranties concerning the products described.
Your FAXPHONE L170 has been sold to you subject to the limited warranties set forth in the warranty cards. Further,
Canon U.S.A. reserves the right to make changes in the specifications of the products described in this guide at any time
without notice and without obligation to notify any person of such changes.
Trademarks
Canon and FAXPHONE are registered trademarks, and UHQ is a trademark of Canon Inc.
All other product and brand names are registered trademarks, trademarks or service marks of their respective owners.
As an ENERGY STAR™ Partner, Canon U.S.A. has determined that the FAXPHONE L170
meets the ENERGY STAR™ guidelines for energy efficiency.
Super G3 is a phrase used to describe the new generation of fax units that use ITU-T V.34
standard 33.6 Kbps* modems. Super G3 High Speed Fax units allow transmission time of
approximately three seconds* per page which results in reduced telephone line charges.
*Approximately three seconds per page document transmission time based on ITU-T No. 1 Chart, standard mode, at 33.6
Kbps modem speed. The Public Switched Telephone Network (PSTN) currently supports 28.8 Kbps modem speeds or
lower, depending on telephone line conditions.
iv
Where to Find Help
Type conventions
Please read the list below of symbols used in this guide.
CAUTION
Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to
use the machine safely, always pay attention to these warnings.
WARNING
Indicates a caution concerning operations that may lead to injury to persons or damage to property if not performed
correctly. In order to use the machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational warnings and restrictions. Be certain to read these items to operate the machine correctly, and to avoid damage to
the machine.
NOTE
Indicates notes for operation or additional explanations. Reading these is highly recommended.
In addition, this Guide uses brackets to show button and switch names on the machine, such as [Start], and [Set]. Text that
appears in the machine’s display is shown in capital letters, such as: .
Safety information
Read this safety information thoroughly before using your machine, and keep it handy in case you need to refer to it later.
WARNING
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from
this product and consult your doctor.
CAUTION
• Do not disassemble or modify. There are high-temperature and high-voltage components inside the machine which may
result in a fire or electrical shock.
• Follow all warnings and instructions marked on the machine.
■ Location
WARNING
Do not place the machine near alcohol, paint thinner, or other inflammable
substances. If inflammable substances come into contact with electrical parts inside
the machine, it may result in a fire or electrical shock.
CAUTION
• Do not place the machine on top of a carpet or rug which has long pile. The threads
may get inside the machine and cause a fire.
• Do not block or cover the ventilation port or any openings on the machine with
objects, as this may result in a fire.
Where to Find Help
v
• Place the machine on a flat, stable, vibration-free surface that is strong enough to
support its weight.
• Do not place objects around the power plug so that you are able at any time to
readily disconnect the power plug from the wall outlet. Otherwise you will be unable
to disconnect the power plug in case of an emergency.
• Make sure the area is free from dust.
• Make sure the location is not affected by extreme temperature changes, and always
stays between 50°F and 90.5°F (10°C and 32.5°C).
• Make sure the relative humidity of the area is between 20% and 80%.
• Keep the machine away from direct sunlight.
• Do not use or store the machine outdoors.
• Do not install the machine near devices that contain magnets or generate magnetic
fields, such as speakers.
• To ensure proper ventilation, make sure the machine is approximately 4 inches (10
cm) away from walls and other equipment.
Power supply
WARNING
• Do not damage or modify the power cord and power plug. Also do not place heavy
objects on the power cord, pull on it, or extensively bend it. These actions may cause
electrical damage and result in a fire or electrical shock.
• Do not insert or unplug the power plug with wet hands, as this may result in electrical
shock.
• Do not overload the wall outlet with too many electrical appliances, as this may
result in a fire or electrical shock.
• Plug the machine into a standard 120 V AC, 60 Hz, three-prong grounded outlet.
•
•
•
vi
Operate the machine only from the type of power source indicated on the machine’s
label or a fire, electrical shock or malfunction may occur. If you are not sure of the
type of power available, consult your local power company.
Do not allow the power cord to be near objects that emit heat. The outer cover of the
power cord may melt resulting in fire or electrical shock.
Make sure the power cord is fully extended and has no knots in it when electricity is
running through it. Knots etc. in the cord may result in fire or electrical shock.
Fully insert the power plug securely into the electrical outlet. If the prongs of the
power plug come into contact with metallic objects etc., it may result in fire or
electrical shock.
Where to Find Help
CAUTION
• During electrical storms, disconnect the power cord from the power outlet.
(Please note that any documents stored in the machine’s memory will be deleted
after 1 hour when you turn off the power.)
• Do not use an extension cord as this may result in fire or electrical shock.
• Disconnect the power cord if the machine will not be used for a long period such as
during holidays.
IMPORTANT
• If dust accumulates around the plug of the power cord when it is connected to a power outlet, unplug the machine and wipe the plug with a
clean, dry cloth.
• Do not plug the machine into the same circuit as appliances such as an air conditioner,
•
•
•
television, or copier. These devices generate electrical noise which may interfere with your
machine’s operation.
Whenever you unplug the machine, wait at least 5 seconds before you plug it in again.
Use only the power cord that came with the machine.
Unplug the machine in the following conditions:
- If the power cord or plug is damaged or frayed.
- If liquid has spilled into the machine.
- If the machine has been exposed to rain or water.
- If the machine does not operate normally when you have followed the instructions in the
guides included with your machine. Adjust only those controls that are covered by the instructions in the guides since improper
adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to
normal operation.
- If the machine has been dropped or damaged.
- If the machine exhibits a distinct change in performance, indicating a need for servicing.
Handling
WARNING
• Do not drop paper clips, staples, or other metal objects inside the machine. Also, do
not spill water, liquid, or inflammable substances inside the machine.
If these items come into contact with high-voltage parts inside the machine, it may
result in a fire or electrical shock. If these items are dropped or spilled in the
machine, unplug the power cord immediately with dry hands. Then, contact the
Canon Customer Care Center at 1-800-828-4040.
• Do not use any highly flammable spray near the machine. If gas from a spray comes
into contact with the electrical components inside the machine, it may result in a fire.
• There are high-voltage components inside the machine. If you are looking inside the
machine to remove paper jams etc., do not allow metallic objects such as jewelry to
come into contact with the inside of the machine. Contact may result in burns or
electrical shock.
Where to Find Help
vii
CAUTION
• Do not place the following objects on top of the machine. If such objects come into contact with internal electrical
components, the machine may short-circuit resulting in fire or electrical shock.
- Metallic objects such as jewelry and watches
- Containers of water or other liquids such as glasses, vases or pot plants
• If water etc. does spill inside the machine, immediately disconnect the power cord and contact the retailer.
• Do not touch the internal electrical parts as this may result in electrical shock.
• Do not place heavy objects on top of the machine as these may topple over and result in injury.
• Do not subject the machine to strong physical shock or vibration.
• Unplug the machine before moving it.
• Do not lift the machine by any of its attachments. Lift it by the recessed areas on the
sides of the machine.
• A distinct change in performance may indicate a need for servicing.
Maintenance
WARNING
• Do not service the machine yourself except as specifically described in this guide. If further servicing is required, contact
the Canon Customer Care Center.
• Keep the machine clean. Dust accumulation may prevent the machine from operating properly.
viii
Where to Find Help
Legal limitation on usage of your product and the use
of images
Using your product to scan, print or otherwise reproduce certain documents, and the use of such images as scanned,
printed or otherwise reproduced by your product, may be prohibited by law and may result in criminal and/or civil liability. A
non-exhaustive list of these documents is set forth below. This list is intended to be a guide only. If you are uncertain about
the legality of using your product to scan, print or otherwise reproduce any particular document, and/or of the use of the
images scanned, printed or otherwise reproduced, you should consult in advance with your legal advisor for guidance.
• Paper money
• Traveler’s checks
• Money orders
• Food stamps
• Certificates of deposit
• Passports
• Postage stamps (canceled or uncanceled)
• Immigration papers
• Identifying badges or insignias
• Internal revenue stamps (canceled or uncanceled)
• Selective service or draft papers
• Bonds or other certificates of indebtedness
• Checks or drafts issued by governmental agencies
• Stock certificates
• Motor vehicle licenses and certificates of title
• Copyrighted works/works of art without permission of
copyright owner
Legal limitation on usage of your product and the use of images
ix
Users in the U.S.A.
Pre-installation requirements for Canon facsimile equipment
A. Location
Supply a suitable table, cabinet, or desk. See the Appendix for the machine’s dimensions and weight.
B. Order information
1. Only a single line, touch-tone or rotary telephone set is to be used.
2. Order an RJ11-C modular jack (USOC code), which should be installed by the telephone company. If the RJ11-C jack is
not present, installation cannot occur.
3. Order a normal business line from your telephone company’s business representative. The line should be a regular
voice grade line or the equivalent. Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-orIDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE OVERSEAS
NOTE
Canon recommends an individual line following industry standards, e.g., the 2500 (Touch Tone) or 500 (Rotary/Pulse Dial) telephones. A
dedicated extension off a PBX machine without “Call Waiting” can be used with your FAXPHONE L170. Key telephone systems are not
recommended because they send non-standard signals to individual telephones for ringing and special codes, which may cause a fax
error.
C. Power requirements
This equipment should be connected to a standard 120-volt AC, three-wire grounded outlet only. Do not connect this
machine to an outlet or power line shared with other appliances that cause “electrical noise.” Air conditioners, electric
typewriters, copiers, and machines of this sort generate electrical noise which often interferes with communications
equipment and the sending and receiving of documents.
Connection of the equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear panel of
this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the telephone company.
An FCC compliant telephone cord and modular jack are provided with this equipment. This equipment is designed to be
connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See
Installation instructions for details.
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but
not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected
to a line, as determined by the total RENs, contact the local telephone company. The REN for this product is part of the
product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal
point (e.g., 10 is a REN of 1.0).
This equipment may not be used on coin service provided by the telephone company.
This equipment if it uses a telephone receiver is hearing aid compatible.
Connection to party lines is subjected to state tariffs.
x
Users in the U.S.A.
In case of equipment malfunction
Should any malfunction occur which cannot be corrected by the procedures described in this guide, disconnect the
equipment from the telephone line and unplug the power cord. The telephone line should not be reconnected or the power
cord plugged in until the problem is completely resolved. Users should contact Canon Authorized Service Facilities for
servicing of equipment. Information regarding Authorized Service Facility locations can be obtained by calling the Canon
Customer Care Center. (1-800-828-4040)
Rights of the telephone company
Should the equipment cause harm to the telephone network, the telephone company may temporarily disconnect service.
The telephone company also retains the right to make changes in facilities and services which may affect the operation of
this equipment. When such changes are necessary, the telephone company is required to give adequate prior notice to the
user.
FCC Notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept an interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in this guide. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. 1-516-328-5000
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic
device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of
the business or other entity, or other individual sending the message and the telephone number of the sending machine or
such business, other entity, or individual.
To enter this information into your machine, follow the instructions in Chapter 3.
Users in the U.S.A.
xi
Users in Canada
Pre-installation requirements for Canon facsimile equipment
A. Location
Supply a suitable table, cabinet, or desk. See the Appendix for the machine’s dimensions and weight.
B. Order information
1. Provide only a single-line to touch-tone or rotary telephone set terminated with a standard 4-pin modular phone plug.
(Touch-tone is recommended if available in your area.)
2. Order an CA11A modular jack, which should be installed by the telephone company. If the CA11A jack is not present,
installation cannot occur.
3. Order a normal business line from your telephone company’s business representative. The line should be a regular
voice grade line or equivalent. Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-orIDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE OVERSEAS
NOTE
Canon recommends an individual line following industry standards [e.g., the 2500 (touch tone) or 500 (rotary/pulse dial) telephones]. A
dedicated extension off a PBX machine without “Camp On” signals is also permissible with your FAXPHONE L170. Key telephone systems
are not recommended because they send non-standard signals to individual telephones for ringing and special codes, which may cause a
fax error.
C. Power requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex). It should be independent from copiers,
heaters, air conditioners or any electric equipment that is thermostatically controlled. The rated value is 120 volts and 15
amperes. The CA11A modular jack should be relatively close to the power outlet to facilitate installation.
xii
Users in Canada
Notice
This product meets the applicable Industry Canada technical Specifications.
Le présent matérial est conforme aux spécifications techniques applicables d’Industrie Canada.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed using an acceptable method of connection. The
customer should be aware that compliance with the above conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in
rural areas.
CAUTION
Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
NOTE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Rglement sur le matériel brouilleur du Canada.
The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a
telephone interface. The termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices does not exceed five.
The REN of this product is 1.0.
L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à
une interface téléphonique. La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à
la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.
Le nombre d’équivalents sonnerie (REN) de ce produit est 1.0.
CANON CANADA INC.
1-800-263-1121
24 HOURS A DAY, SEVEN DAYS A WEEK
Users in Canada
xiii
Laser Safety
Laser Safety
This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser product under the U.S. Department of
Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and
Safety Act of 1968. This means that the machine does not produce hazardous radiation.
Since radiation emitted inside the machine is completely confined within protective housings and external covers, the laser
beam cannot escape from the machine during any phase of user operation.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented
regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1,
1976. Compliance is mandatory for products marketsed in the United States.
CAUTION
Use of controls, adjustments, or performance of procedures other than those specified in this User’s Guide may result in
hazardous radiation exposure.
The label is attached to the laser scanner machine inside the machine and is not in a user access area.
xiv
Users in Canada
Contents
About the Manuals for the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Where to Find Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Product Type and Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Type conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Legal limitation on usage of your product and the use of images . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Users in the U.S.A.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Pre-installation requirements for Canon facsimile equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Connection of the equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
In case of equipment malfunction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Rights of the telephone company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Users in Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Pre-installation requirements for Canon facsimile equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xii
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
CDRH Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Chapter 1
Introducing the FAXPHONE L170
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
The Main Features of the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
Fax Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
Printer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3
Copier Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3
Telephone Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3
Using the Machine as a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4
System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4
Using Your Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5
Chapter 2
Setting Up Your Machine
Choosing a Location for Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
Unpacking Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
Do You Have Everything? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
Removing Shipping Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Replaceable Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Assembling the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
Attaching Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
Document Output Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
Output Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
Installing the Paper Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
Making Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6
Connecting the Machine to Your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6
Connecting the Telephone Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7
Connecting the Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7
Getting Acquainted With Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9
Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10
Contents
xv
The Operation Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Special Function Buttons (One-Touch Speed Dial Panel Open) . . . . . . . . . . . . . . . . . . . . . . . . .
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Energy Saver Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Energy Saver Mode Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring from the Energy Saver Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Toner Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handling and Storing Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing/Replacing the Toner Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 3
2-11
2-12
2-13
2-14
2-14
2-14
2-15
2-15
2-16
Registering Information in the Machine
Guidelines for Entering Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Numbers, Letters, and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Personalizing Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Registering Required Sender Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What is Sender Information? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering the Date and Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Registering Your Fax Number and Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Telephone Line Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 4
3-1
3-1
3-3
3-3
3-3
3-4
3-4
3-5
3-5
Paper Handling
Print Media Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Printing Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Loading Paper in the Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Loading Envelopes in the Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Loading Paper in the Multi-Purpose Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Loading an Envelope in the Multi-Purpose Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Testing the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Orientation of the Document and the Paper Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Selecting the Paper Output Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Paper Type and Paper Output Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Face Down Paper Output Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Face Up Paper Output Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Chapter 5
Speed Dialing
Speed Dialing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
One-Touch Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Storing Numbers for One-Touch Speed Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Changing or Deleting a Number/Name Stored Under a One-Touch Speed Dial Button . . . . . . . . 5-3
Using One-Touch Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Coded Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Storing Numbers for Coded Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Changing or Deleting a Number/Name Stored under a Coded Speed Dialing Code . . . . . . . . . . 5-6
Using Coded Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Group Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
Creating Groups for Group Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
Changing or Deleting a Number/Name Stored under a Group Dialing . . . . . . . . . . . . . . . . . . . . . 5-9
Using Group Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
Directory Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11
Chapter 6
Sending Faxes
Preparing to Send a Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scanning Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loading Documents in the ADF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Resolution and Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Image Quality (Resolution) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Exposure (Density) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xvi
Contents
6-1
6-1
6-2
6-3
6-4
6-4
6-5
6-6
6-6
Manual Sending Via the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-6
Dialing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-6
Sending Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Manual Sending Via the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8
Canceling Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9
Canceling Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9
While Documents Are Being Scanned Using the ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9
After All Documents Are Scanned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9
Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10
Manual Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10
Automatic Redialing With Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10
Canceling Automatic Redialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10
Setting Up Automatic Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10
Sequential Broadcasting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-12
Sending a Document to More Than One Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-12
Sending a Document Using Group Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-13
Delayed Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-14
Chapter 7
Receiving Faxes
Different Ways to Receive a Fax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1
Setting the Receive Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
Receiving Faxes and Phone Calls Automatically:
FaxTel Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
Setting the Options for FaxTel Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
What Happens When FaxTel Mode is Selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
Receiving Faxes Manually: Manual Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-4
Receiving Faxes Automatically: FaxOnly Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-5
Using an Answering Machine: AnsMode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-5
Using the Machine With an Answering Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-5
Receiving with a DRPD (Distinctive Ring Pattern Detection) service: DRPD . . . . . . . . . . . . . . . . .7-5
Receiving Faxes in Memory When a Problem Occurs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-6
Receiving While Performing Other Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-7
Canceling an Incoming Fax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-7
Chapter 8
Setting Up and Using Polling
What’s Polling? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
Before You Use Polling Receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
Polling Other Fax Machines to Receive Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2
Requesting Another Fax to Send a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2
Setting Up Polling Sending. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3
Setting Up a Polling Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3
Scanning a Document into the Memory for Polling Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-4
Changing the Polling Box Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-5
Deleting a Polling Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-6
Chapter 9
Special Features
Special Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1
Dialing Long Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1
How to Enter Pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1
Using Tone Dialing On a Pulse Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2
Using Memory Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-3
Turning Memory Lock ON and Setting the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-3
Turning Memory Lock OFF and Printing Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-4
Chapter 10
Making Copies
Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-1
Specifying the Paper Size and Type
(Common for Cassette and Multi-Purpose Feeder) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2
Specifying the Paper Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2
Specifying the Paper Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-3
Contents
xvii
Setting Enlarging/Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4
Enlarging/Reducing Using Preset Copy Ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4
Enlarging/Reducing Using Custom Copy Ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-5
Improving Copied Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
Adjusting the Image Quality (Resolution) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
Adjusting the Exposure (Density) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
Adjusting Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
Adjusting Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7
Special Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
Collate Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
Reserve Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Confirming the Copy Job You Reserved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Deleting the Copy Job You Reserved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Chapter 11
System Monitor
Checking the Status of Copy, Fax, Print and Report Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming Transmission Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming Transmission Results and Sending Reservation. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a Fax Job. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming and Deleting a Copy Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming and Deleting a Print Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming and Deleting a Report Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 12
11-1
11-1
11-2
11-2
11-3
11-3
11-4
Reports and Lists
Activity Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
Transmission (TX) Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2
Error TX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2
TX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3
Multi TX/RX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3
Reception (RX) Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-4
Memory Clear Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5
Speed Dialing Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-6
One-Touch Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-7
Coded Speed Dial List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-7
Group Dial List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-8
User’s Data List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-9
Document Memory List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-10
Chapter 13
Troubleshooting
Clearing Jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
Removing Jammed Paper from Inside the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
Removing Jammed Paper from the ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6
LCD Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-7
Paper Feeding Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-9
Faxing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-12
Sending Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-12
Receiving Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
Telephone Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-17
Copying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-18
Print Quality Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-19
Printing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-21
If You Cannot Solve the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-22
Chapter 14
Maintaining Your Machine
Cleaning the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the Machine’s Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the ADF Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transporting the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xviii
Contents
14-1
14-1
14-2
14-4
Chapter 15
The Menu System
Accessing the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-1
Menu Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-2
1. PAPER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-2
2. COMMON SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-3
3. COPY SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-5
4. FAX SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-6
5. ADD. REGISTRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-13
6. PRINTER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-14
7. TIMER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-15
8. PRINT LISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16
Appendix
Specifications
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Copier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printable Area: Papers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printable Area: Envelopes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-1
A-2
A-3
A-3
A-4
A-5
A-6
A-7
A-8
Glossary
Index
Contents
xix
xx
Contents
Introducing the FAXPHONE L170
1
CHAPTER
This chapter introduces you to the main features of the machine. It also explains how to get the most out of the documentation that comes with
the machine, and gives important safety instructions.
Welcome
Thank you for purchasing the new Canon FAXPHONE L170. We are sure that your machine will meet your printing and
copying needs easily and conveniently, as well as your fax and phone requirements.
FAXPHONE L170
Welcome
1-1
The Main Features of the Machine
This machine is a multifunction system for your home or small office, and combines a plain paper fax machine, a laser
printer, a copier, and a telephone into a single, convenient desktop machine.
1
Introducing the FAXPHONE L170
The machine’s multitasking ability enables you to perform multiple operations simultaneously. For example, you can print a
document or make copies at the same time you are sending a fax.
The compact size of the machine makes it ideal for desktop use, and allows you to use it in places where other machines
may not fit.
Fax Features
■ UHQ™ Image Processing System
The machine uses Canon’s Ultra High Quality Image Processing System to provide enhanced definition in faxed photos.
■ Error Correction Mode (ECM)
The machine’s Error Correction Mode (ECM) reduces transmission errors while communicating with another ECM-capable machine.
■ Automatic switching between fax and voice calls
The machine can automatically distinguish between fax and voice calls, so that you can receive both through a single phone line.
■ Answering machine connection
You can connect an answering machine to receive telephone messages while you are away.
■ Transmission speed
The machine uses G3 data encoding methods that increase transmission speed to approx. 3 seconds* per page.
■ Memory sending/receiving
The machine can store up to 450** fax pages in its memory, and can receive faxes while printing.
■ Reduced-size printing
The machine automatically scales received faxes to fit the size of the paper loaded in the machine.
■ Automatic dialing and broadcasting
For easier faxing, the machine provides One-Touch Speed Dialing, Coded Speed Dialing, and Group Dialing methods for automatic dialing.
It also allows you to broadcast or send a fax at a preset time to as many as 142 locations.
*
1-2
Based on Canon FAX Standard Chart No.1, standard mode.
The Main Features of the Machine
Printer Features
■ Excellent print quality
The machine offers 1200 dpi enhanced × 600 dpi laser beam printing, providing you with high resolution text and graphics.
■ Simple maintenance
The S35 Cartridge for the machine contains both the toner and drum, making installation and replacement simple.
■ Economy toner-saving printing
1
Introducing the FAXPHONE L170
The machine includes an economy printing mode which allows you to reduce toner consumption by approx. 30%.
Copier Features
■ Up to 99 copies
The machine can make up to 99 copies of a document at a time, at a rate of up to 19 copies per minute on LTR-Size paper.
■ Resolution
The machine scans documents at 300 × 300 dpi. Printing resolution is 1200 dpi enhanced × 600 dpi .
■ Copy enlargement/reduction
The machine can reduce or enlarge copies in the range between 50% and 200% of their original size.
■ Collate copy
The machine can sort copies in page order. It is convenient when you make multiple copies of a multiple page document.
Telephone Features
■ Automatic dialing
The machine’s 3 automatic dialing methods (One-Touch Speed Dialing, Coded Speed Dialing, and Group Dialing) can be used to store
phone and fax numbers for easy and efficient calling.
■ Connection for the handset, an answering machine, or a telephone
Connecting the handset or a telephone to the machine allows you to use it to make and receive normal telephone calls. In addition,
connecting an answering machine allows you to receive faxes and phone messages while you are away from your desk.
The Main Features of the Machine
1-3
Using the Machine as a Printer
The printer driver that is included with your machine allows you to use the machine’s printing function directly from your PC.
1
Introducing the FAXPHONE L170
• Use the machine as the default printer for Windows applications
For more information on using the printer driver with your machine, refer to the Software Guide also stored on this
CD-ROM.
System Requirements
The printer driver for Windows 98/Me/2000/XP can be used in the following system environments.
■ Operating System
Windows 98, Windows Me, Windows 2000, or Windows XP.
■ Computer
Any computer on which Windows 98, Windows Me, Windows 2000, or Windows XP runs properly.
■ Hardware Requirements
• IBM or IBM-compatible PC
• CD-ROM drive or network environment with the access to CD-ROM
• PC equipped with a USB port and the USB class driver installed
OS
CPU
®
Windows 98
Intel Pentium
Windows Me
Intel Pentium
RAM
Available free disk space
90 MHz or greater
32 MB or greater
100 MB or greater
150 MHz or greater
32 MB or greater
100 MB or greater
Windows 2000*
Professional
Intel Pentium 133 MHz or greater,
or compatible micro processors (up
to 2 processors are supported)
64 MB or greater
500 MB or greater
Windows 2000*
Server
Intel Pentium 133 MHz or greater,
or compatible micro processors (up
to 4 processors are supported)
128 MB or greater
500 MB or greater
Windows XP*
Pentium Family
233 MHz or greater
64 MB or greater
500 MB or greater
®
®
®
®
* Logon as a user account with Administrators’ rights is recommended.
1-4
Using the Machine as a Printer
Using Your Documentation
Your machine includes the following documentation to help you learn how to use your machine:
1
• Set-Up Instructions
Introducing the FAXPHONE L170
This Guide provides basic information on how to set up and use the machine.
• Basic Guide (this Guide)
This Guide provides detailed information on how to use and troubleshoot your machine.
• Software Guide
This Guide (stored in the CD-ROM) describes how to use the machine to print from your PC.
Using Your Documentation
1-5
Introducing the FAXPHONE L170
1
1-6
Using Your Documentation
2
Setting Up Your Machine
CHAPTER
This chapter tells you how to unpack, assemble, and connect your machine, install the toner cartridge, and load paper-everything you need to
know to get your machine ready to use.
Choosing a Location for Your Machine
Before unpacking your machine, follow these guidelines to choose an appropriate location for the machine.
CAUTION
Please review the information provided in "Safety information" on p. v, to make sure you are installing your machine for safe
use.
• Put the machine in a cool, dry, clean, well ventilated place:
- Make sure the area is free from dust.
- Make sure the location is not affected by extreme temperature fluctuations, and remains between 50°F and 90.5°F (10°
and 32.5°C).
- Make sure the area’s relative humidity is always between 20% and 80%.
• Keep the machine away from direct sunlight.
• If possible, place the machine near an existing telephone outlet, to allow for an easy connection of the telephone line to
the machine.
• Place the machine near an electrical wall outlet that provides 120 V AC (60 Hz) power.
• Place the machine near the PC you will be connecting it to. Make sure you can reach it easily, as you will be using the
machine as a printer, fax machine, copier, and telephone.
• Do not plug the machine into the same circuit as an appliance such as an air conditioner, electric typewriter, television, or
copier. Such devices generate electrical noise that can interfere with your machine’s ability to send or receive faxes.
• Set the machine on a flat, stable, vibration-free surface that is strong enough to support its weight approx. 24.7 lb (11.2
kg).
Choosing a Location for Your Machine
2-1
Unpacking Your Machine
Follow the directions below to unpack your machine properly, and to make sure you have all of its components and
documentation.
2
Setting Up Your Machine
Do You Have Everything?
As you unpack the machine, save the carton and packing material in case you want to move or ship the machine in the
future.
Carefully remove all items from the box. You should have someone help by holding the box while you lift the machine and
its protective packaging out of the carton.
Make sure you have the following items:
• Machine
• S35 S-Cartridge
• Document output tray
• Output tray
• Cassette extension
• Extension cover
• Power cord
• Telephone line cord
• Documentation
Set-Up Instructions
Basic Guide
Warranty
Warranty for S35 Cartridge
Registration Card (for USA only)
• Handset
• Handset cradle
• Plugs with pins
• FAXPHONE L170 Software CD-ROM
If any of the above items are damaged or missing, notify your local authorized Canon dealer immediately.
2-2
Unpacking Your Machine
NOTE
• The actual items may differ in shape and quantity from the one shown on p. 2-2.
• Note that the items included with your machine may vary depending on the country of purchase.
• Important! Save your sales receipt for proof of purchase in case your machine requires warranty service.
• In addition to the items shipped with your machine, if you wish to use the machine as a printer, you will need a USB cable, which you can
purchase from your Canon dealer. For best results, use a cable that is no more than 5 meters long.
Removing Shipping Materials
In order to protect your machine during shipping, the machine has been packed with protective material that you must
remove before using. Follow these steps:
2
Setting Up Your Machine
NOTE
The actual shipping materials may differ in shape, quantity, and position from the ones shown in the illustrations below.
1
Remove all pieces of shipping tape from the exterior of the machine.
2
Open the document feeder tray by flipping it down.
3
Open the operation panel by grasping it at the center and gently pulling it up.
Remove protective sheet from the Automatic Document Feeder (ADF), then gently close the operation panel by pressing it
down until it clicks.
Replaceable Parts
The only component of the machine that needs regular service or replacement is the S35 Cartridge.
The S35 S-Cartridge comes with your machine but you should purchase the regular S35 Cartridge for replacement.
Although Canon manufactures many types of toner cartridges, the S35 Cartridge is the only one designed to be used with
your machine. The S35 Cartridge can be purchased at any Canon authorized dealer.
Unpacking Your Machine
2-3
Assembling the Machine
Use the following instructions to assemble the main unit and its components. To see how the machine will look fully
assembled, see “Getting Acquainted With Your Machine,” on p. 2-9.
2
Setting Up Your Machine
Attaching Components
NOTE
Make sure the tabs are inserted into the slot completely.
Document Output Tray
Insert the tabs into the slots on the back of the machine.
Output Tray
Insert the tray into the corresponding slots.
2-4
Assembling the Machine
Installing the Paper Cassette
1
Attach the extension cover on the back of the machine.
2
Pull out the paper cassette.
3
Attach the cassette extension to the cassette.
4
Insert the paper cassette into the machine.
Setting Up Your Machine
2
Assembling the Machine
2-5
Making Connections
NOTE
• Be sure to connect any external device before using your machine.
• Canon cannot guarantee that all answering machines will be compatible with your machine, due to varying specifications.
• If you have connected an external device to your machine, be sure to set the correct receive mode. (See Chapter 7, “Receiving Faxes.”)
• To connect an extension phone as well as an answering machine, connect the extension phone to the answering machine, and then the
Setting Up Your Machine
2
answering machine to your machine.
• If you connect a data modem to your machine and you use it extensively, or others access your PC frequently through the data modem,
you may want a dedicated telephone line for your data modem.
Connecting the Machine to Your PC
Your machine has a USB port that allows you to connect it to a PC. To do this, you need to purchase a USB cable from your
dealer.
NOTE
For best results, use a cable that is 5 meters in length or shorter.
Connect the machine to your computer as follows:
1
2
2-6
Make sure the computer is turned off and the machine is unplugged.
Connect the USB cable to your machine and PC during software installation to ensure the proper operation of the printer driver.
(See the Software Guide.)
Making Connections
Connecting the Telephone Line
Connect the telephone line to the jack on the left side of the machine:
Connect the optional handset to
.
Connect an extension phone or answering
machine to
.
Connect the supplied telephone line to
.
2
Setting Up Your Machine
Connect the other end of line to a wall telephone jack.
If you connect an answering machine to the machine, be sure to read your answering machine’s manual.
NOTE
You can also connect the extension phone to the jack marked
if you have not connected the handset.
Connecting the Power Cord
CAUTION
Follow these guidelines when connecting your machine to a power source:
- The machine is intended for domestic use only and requires 120 V AC. Do not use it outside the country where it was
purchased.
- Use only the power cord that came with the machine. Using a longer cord or extension cord can cause the machine to
malfunction.
- Unplug the machine only by pulling on the plug itself. Never pull on the cord.
- Do not plug the machine into an outlet shared with an appliance such as an air conditioner, computer, electric typewriter,
or copier. These devices generate electrical noise, which can interfere with the operation of the machine.
- Make sure nothing is laying on the power cord, and that the cord cannot be walked on or tripped over.
- Do not overload the electrical outlet. Make sure the total amperage used by all the machines plugged into the outlet does
not exceed the ampere rating of the outlet’s circuit breaker.
- Do not plug the machine into an uninterruptible power supply (UPS).
Making Connections
2-7
Connect the power cord as follows:
1
Plug the supplied power cord into the power connector on the back of the machine.
2
Plug the other end of the power cord into the outlet.
Setting Up Your Machine
2
NOTE
The machine has no power switch, so its power is on as long as it is plugged in. Once connected, though, the machine still needs to warm
up before you can use it.
While the machine is warming up, the message appears in the LCD display:
PLEASE WAIT
12/31/2004 WED 15:11
FaxOnly
STANDARD
NOTE
If the toner cartridge has not been installed yet, the message appears in the LCD display, and the Alarm
indicator flashes. In this case, install the toner cartridge. (See “Installing/Replacing the Toner Cartridge,” on p. 2-16.)
2-8
Making Connections
Getting Acquainted With Your Machine
Before using your machine, look over the diagrams on these pages to become familiar with the machine’s components.
2
a Document feeder tray
Place documents to be faxed or copied.
b ADF (Automatic Document Feeder)
Holds documents and feeds them automatically into the scanning machine.
c Document output tray
Documents come out here.
d Slide guides
Adjust to the width of documents.
Setting Up Your Machine
Front View
f Output tray
Holds printout. Received faxes.
g Printer cover
Open it when you install the cartridge, or remove jammed paper.
h Multi-purpose feeder
Used when printing paper one by one manually.
i Cassette
Holds the paper supply.
e Operation panel
Controls the machine.
Getting Acquainted With Your Machine
2-9
Rear View
Setting Up Your Machine
2
a USB port
Connect the USB (Universal Serial Bus) cable.
b Handset jack
Connect the handset.
c Extension phone jack
Connect an extension phone.
d Telephone line jack
Connect the telephone cable.
2-10
Getting Acquainted With Your Machine
e Face up cover
Open it when you output paper face up, or remove jammed paper.
f Power socket
Connect the power cord.
g Extension cover
Protects paper supply in the cassette from dirt and dust.
h Machine Serial Number
The Operation Panel
l
a Menu button
m Image Quality button
Use this button to customize the operation of the machine.
b
Use this button to select the resolution the machine will use for the document
you want to fax, or copy.
In Use/Memory indicator
Lights when the telephone line is used or a document has been received in
memory.
n
c LCD display
The LCD display shows messages and prompts while you use the machine.
d
o
Alarm indicator
This indicator flashes when an error occurs, or when the machine is out of paper
or toner.
g Status Monitor button
Use this button to check the status of copy, fax, print and report jobs.
h
Energy Saver button
Use this button to set or cancel the energy saver mode manually. The button
lights green when the energy saver mode is enabled.
i Numeric buttons
Use these buttons to enter numbers and names when registering information,
and to dial fax/telephone numbers.
j Tone button
Use this button to use tone dialing temporarily when your machine is set for
pulse dialing.
k Enlarge/Reduce button
Use this button to set an enlargement or reduction ratio of a copy.
l Exposure button
(+) button
p Set button
Use this button to register your settings. Also, if the document being scanned
stops in the ADF, pressing this button makes the document come out
automatically.
FAX button
Use this button to switch standby display to Fax mode.
f
(-),
Use this button to scroll through the selections.
COPY button
Use this button to switch standby display to Copy mode.
e
Stop/Reset button
Use this button to cancel sending or receiving faxes and other operations, and
bring back the standby display in the LCD.
q
Start button
Use this button to begin faxing, or copying.
r
Hook button
Use this button to dial, even with the handset still in the handset cradle.
s Directory button
Use this button to look up fax/telephone numbers registered for speed dialing.
t Coded Dial button
Use this button to dial a fax/telephone number that you have registered for
Coded Speed Dialing.
u Redial/Pause button
Use this button to redial the last number that was dialed using the numeric
buttons, or to enter pauses in a fax number.
v One-Touch Speed Dial buttons
Use these buttons for One-Touch Speed Dialing.
w One-Touch Speed Dial panel
Open this panel to access the special function buttons.
Use this button to adjust the copy exposure.
Getting Acquainted With Your Machine
2-11
Setting Up Your Machine
2
Special Function Buttons (One-Touch Speed Dial Panel Open)
21
22
23
24
25
26
27
28
31
32
29
2
Setting Up Your Machine
30
Receive
Mode
a Report button
Use this button to print activity reports.
b Receive Mode button
Use this button to select the receive mode for receiving faxes.
c Space button
Use this button to enter a space between letters and numbers when you are
registering information.
Report
Delayed
Transmission
Polling
Space
Delete
Clear
d Delayed Transmission button
Use this button to register a time for delayed sending.
e Polling button
Use this button to set a document for polling sending, and to poll the other fax to
receive a document.
f Clear button
Use this button to clear an entire entry during information registration.
g Delete button
Use this button to delete characters one by one.
2-12
Getting Acquainted With Your Machine
Handset
Setting Up Your Machine
2
a Ringer Volume Switch
Adjust the volume of the ringer. Use a pen or another pointed object to adjust the switch to ‘High’, ‘Low’, or ‘OFF’.
b Speaker Volume Switch
Adjust the volume of the handset so you can hear suitable from the speaker.
Getting Acquainted With Your Machine
2-13
Energy Saver Mode
2
NOTE
Setting Up Your Machine
The machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine
automatically enters the energy saver mode.
• The energy saver function does not activate when the machine is in the following status:
• The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30 minutes. You can also turn off the
energy saver function. (See Chapter 15, “The Menu System.”)
- When printing out copies, faxes or other pages
- When sending or receiving faxes
- While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicator
lights up
- When paper jams occur
- When an error code appears and the Alarm indicator flashes
- When no paper is loaded in the cassette
Setting the Energy Saver Mode Manually
1
Press [Energy Saver].
The LCD is turned off and [Energy Saver] lights up.
NOTE
Right after the machine is restored from the energy saver mode, or right after copying finishes, wait about 2 seconds before pressing
[Energy Saver].
Restoring from the Energy Saver Mode
1
Press [Energy Saver].
[Energy Saver] goes off and the machine enters standby mode.
NOTE
The machine can be restored from the energy saver mode immediately. However, it may vary according to room temperature and
circumstances.
2-14
Energy Saver Mode
The Toner Cartridge
Handling and Storing Cartridges
• Do not open the drum protective shutter on the cartridge. If the drum surface is exposed to light and damaged, print
• Do not stand the cartridge on end, and do not turn it upside down. If toner becomes caked in the cartridge, it may prove
impossible to free it even by shaking the cartridge.
• Keep the cartridge away from computer screens, disk drives, and floppy disks. The magnet inside the cartridge may harm
these items.
HDD
• When holding the cartridge never touch the drum protective shutter with your hands.
The Toner Cartridge
2-15
Setting Up Your Machine
2
quality may deteriorate.
• Do not expose the cartridge to direct sunlight or bright light for longer than 5 minutes.
• Do not store the cartridge in direct sunlight.
• Avoid locations subject to high temperature, high humidity, or rapid changes in temperature. Store the cartridge between
32° and 95°F ( 0° and 35°C).
• Hold the cartridge as shown so that your hand is not touching the drum’s protective shutter.
• Store the cartridge in its protective bag. Do not open the bag until you are ready to install the cartridge in the machine.
• Save the protective bag. You may need to repack and transport the cartridge at a later date.
• Do not store the cartridge in salty air or where there are corrosive gases such as from aerosol sprays.
• Do not remove the cartridge from the machine unless necessary.
• Be sure to remove the toner cartridge from the machine when disposing of the machine.
CAUTION
Setting Up Your Machine
2
DO NOT PLACE THE CARTRIDGE IN FIRE. TONER POWDER IS FLAMMABLE.
Installing/Replacing the Toner Cartridge
The machine uses a Canon S35 Cartridge. The procedure on the next page explains how to install the cartridge for the first
time, and how to replace it when the toner runs out.
When the message appears, the toner in the cartridge may simply be unevenly distributed.
Before replacing the cartridge, follow the instructions on p. 2-17 to evenly distribute the toner. If after doing this the
message remains displayed or the print quality is low, replace the cartridge as described below.
NOTE
The S35-S is a starter cartridge that comes with your machine and yields approx. 2,500 page of printouts, while the S35 cartridge you
purchase can yield approx. 3,500 page of printouts.
2-16
1
Remove any documents and/or printed pages from the machine.
2
Make sure the machine is plugged in.
3
Remove the cartridge from the bag. Keep the bag in a safe place for future use.
The Toner Cartridge
4
Gently rock the cartridge several times to evenly distribute the toner inside.
INSTRUCTIONS
DRUM PROTECTIVE SHUTTER
Always hold the cartridge as shown so that the side with the instructions are facing upward. Do not forcefully move or push the protective
shutter of the drum in any way.
5
Hold the cartridge on a flat stable surface with one hand, and break the tab and pull out the seal completely with the other hand.
TAB
6
Open the printer cover.
NOTE
If you are replacing the old cartridge with the new one, remove the old cartridge from the machine. Then, discard the old toner cartridge
immediately according to the local laws and regulations for disposal of consumables.
The Toner Cartridge
2-17
Setting Up Your Machine
2
NOTE
7
8
Align the projections
the machine.
Setting Up Your Machine
2
Hold the cartridge and position the arrow mark on the cartridge towards the inside of the machine as shown below.
9
2-18
Close the printer cover.
The Toner Cartridge
on both sides of the cartridge to the guides
in the machine and slide the cartridge completely into
3
Registering Information in the
Machine
CHAPTER
This chapter describes how to enter information in your machine.
Guidelines for Entering Information
The following section explains how to enter user information into the machine.
NOTE
If you pause while entering information and do not make an entry for more than 60 seconds, the machine returns to standby mode and
loses all information you had entered up to that point. You will then have to start again.
The time until the machine returns to the standby mode can be specified in a range of 1 minute to 9 minutes. You can also turn off AUTO
CLEAR function. (See Chapter 15 “The Menu System.”)
Entering Numbers, Letters, and Symbols
Each numeric button has a number and a group of uppercase and lowercase letters assigned to it. Use the chart below to
determine which numeric button to press for each character.
Button
Letter Mode
Number Mode
1
@.–_/
1
2
ABCabc
2
3
DEFdef
3
4
GHIghi
4
5
JKLjkl
5
6
MNOmno
6
7
PQRSpqrs
7
8
TUVtuv
8
9
WXYZwxyz
9
0
#
0
–. #!“,;:^ _=/|’?
$@%&+\ ()[]{}<>
Follow this procedure when you come to a step that requires you to enter a name or number.
Guidelines for Entering Information
3-1
1
Press [
] to switch to the letter mode (:A) or the number mode (:1).
You can see what mode you are in by the character indicated on the top right corner of the LCD display.
:A
_
2
Use the numeric buttons to enter the letter or number.
Press the button repeatedly until the letter or number you want appears.
● To enter two letters or symbols that are under the same button:
❑ Press the numeric button ➞ [ (+)] ➞ press the same numeric button again.
3
Registering Information in the Machine
For example, to enter you would press [3] ➞ [
(+)] ➞ [3].
● To enter a space:
❑ Press [Space] under the One-Touch Speed Dial panel.
● To delete a character:
❑ Press [Delete] under the One-Touch Speed Dial panel.
● To delete an entire entry:
❑ Press [Clear] under the One-Touch Speed Dial panel.
3-2
Guidelines for Entering Information
Personalizing Your Machine
Registering Required Sender Information
In the United States, FCC rules governing the use of facsimile equipment state that the following sender information must
be printed on every facsimile transmission:
Your machine has been designed to print this information at the top of every fax you send. You must therefore register your
machine’s telephone/fax number, your personal name or company name, and the current date and time before using your
machine. This section gives details on registering your sender information.
What is Sender Information?
When you receive a fax, the name of the person or company who sent you the fax, their fax/telephone number, and the date
and time of transmission will be printed in small type at the top of each page. This information is called the Sender
information or the Transmit Terminal Identification (TTI). You must register your details in your machine so that whenever
you send a fax, the other party knows who sent it, and when it was sent. Below is an example of how your sender
information would print on a fax sent from your machine:
12/26/2004 10:12
FAX 123 4567
YOUR NAME
RECEIVER
001
THE SLEREXE COMPANY LIMITED
SAPORS LANE•BOOLE•DORSET•BH25 8ER
TELEPHONE BOOLE (945 13) 51617 – FAX 123456
You can select
if the sender
information is
printed inside
or outside the
image area
( TTI
POSITION,
p. 15-6).
Our Ref. 350/PJC/EAC
Date and time
of transmission.
Your fax or
telephone
number.
You can select if
FAX or TEL is
displayed before
the number
( TEL NUMBER
MARK, p. 15-6).
Receiver’s name
appears here if
you used memory
sending and
dialed their fax
number using
speed dialing.
The page
number of
the fax.
Your name or
company name.
To enter the sender information in your machine, follow the procedures on the following pages.
Personalizing Your Machine
3-3
Registering Information in the Machine
3
• Your fax number
• Your personal name or company name
• The time and date of transmission
Entering the Date and Time
Follow this procedure to enter the date and time:
1
Press [Menu].
2
Press [
3
Use the numeric buttons to enter the date (month/day/year) and time (in 24-hour format) ➞ press [Set].
(-)] or [
(+)] to select <7.TIMER SETTINGS> ➞ press [Set] twice.
DATE/TIME SETTING
TIMER SETTINGS
12/31 ’04 15:10 ➞ 2.AUTO CLEAR
Registering Information in the Machine
3
Enter only the last 2 digits of the year.
4
Press [Stop/Reset] to return to standby mode.
Registering Your Fax Number and Name
Follow this procedure to register your fax/telephone number and name:
1
Press [Menu].
2
Press [
3
Use the numeric buttons to enter your fax/telephone number (max. 20 digits, including spaces) ➞ press [Set].
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [Set] four times.
USER TEL NO.
TEL LINE SETTINGS
123xxxxxxx ➞ 2.TEL LINE TYPE
To enter a plus sign (+) before the number, press [#] repeatedly until it appears.
For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
4
Press [Menu] ➞ [
5
Use the numeric buttons to enter your name (max. 24 characters, including spaces) ➞ press [Set].
(-)] or [
(+)] to select <2.UNIT NAME> ➞ press [Set].
:A
Canon
➞
USER SETTINGS
3.TX TERMINAL ID
For details on how to enter or delete characters, see “Entering Numbers, Letter, and Symbols,” on p. 3-1.
6
3-4
Press [Stop/Reset] to return to standby mode.
Personalizing Your Machine
Setting the Telephone Line Type
Use this procedure if you need to change the telephone line setting. is set as the default setting.
If you are unsure which setting to use, contact your local telephone company.
Follow this procedure to set the telephone line type:
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [Set] three times.
3
Press [
(-)] or [
(+)] to select <2.TEL LINE TYPE> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select the telephone line type ➞ press [Set].
3
Registering Information in the Machine
1
TEL LINE TYPE
TEL LINE TYPE
TOUCH TONE ➞ 3.TX START SPEED
You can select from the following:
- for tone dialing
- for pulse dialing
5
Press [Stop/Reset] to return to standby mode.
Setting the Daylight Saving Time
This machine supports the daylight saving time system that shifts the clock time ahead or back according to the change in
seasons. You can select whether the time information in your machine changes to match the daylight saving time system
and set the day and time when the daylight saving time starts and ends.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <7.TIMER SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <5.DAYLGHT SAV TIME> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select to enable the daylight saving time setting or to disable it ➞ press [Set].
If you selected , go to step 5.
If you selected , go to step 12.
5
Press [Set] twice.
6
Press [
(-)] or [
MONTH
(+)] to select the month in which the daylight saving time starts ➞ press [Set] twice.
APRIL ➞
WEEK
FIRST WEEK
Personalizing Your Machine
3-5
7
Press [
(-)] or [
(+)] to select the week in which the daylight saving time starts ➞ press [Set] twice.
You can select from the following:
-
-
-
-
- (fourth or fifth week depending on the selected month)
WEEK
8
Press [
SECOND WEEK ➞
(-)] or [
3
Registering Information in the Machine
SUNDAY
(+)] to select the day of the week on which the daylight saving time starts ➞ press [Set] twice.
DAY
9
DAY
SUNDAY ➞
TIME
02:00
Use the numeric buttons to enter the time at which the daylight saving time compensation is made ➞ press [Set] three times.
Use the 24-hour format for the time (e.g., 2:00 p.m. as 14:00) and precede single digits with a zero.
TIME
10
3-6
02:00 ➞
MONTH
OCTOBER
Press [ (-)] or [ (+)] and [Set] to select the month, week, day of the week, and time when the daylight saving time ends. (e.g.
OCTOBER LAST WEEK, SUNDAY and 02:00)
11
Press [Set].
12
Press [Stop/Reset] to return to standby mode.
Personalizing Your Machine
4
Paper Handling
CHAPTER
This chapter describes how to select and prepare the print media for the different functions your machine can perform.
Print Media Requirements
For high-quality printing, we recommend using paper and transparencies recommended by Canon. Some types of paper
available at office supply stores may not be suitable for the machine. If you have any questions about paper and
transparencies, contact the Canon Customer Care Center.
■ Paper Storage
In order to prevent paper jams, do the following:
• To prevent moisture buildup, store remaining paper wrapped tightly in its original package. Store paper in a dry location,
out of direct sunlight.
• To prevent curling, store paper flat, not upright.
• If the paper is curled, uncurl it before loading it in the cassette or multi-purpose feeder. Failure to do so will cause paper
creases and a paper jam.
■ Unacceptable Paper
Do not print on the following types of paper stock. Doing so may result in paper jams.
• Severely curled or wrinkled paper
• Transparencies designed for full-color copiers or printers
• Paper which has already been copied using a digital full-color copier (Do not print on the reverse side.)
• Paper which has been printed on using a thermal transfer printer (Do not print on the reverse side.)
IMPORTANT
Never attempt to print on full-color transparencies. Doing so may result in product malfunction.
Print Media Requirements
4-1
■ Acceptable Paper
Cassette/Multi-Purpose Feeder
Paper Size
A4, B5, A5, LTR, LGL, EXECUTIVE
Envelope: COM10, MONARCH, DL, ISO-C5
Free Size (Multi-purpose feeder):8 1/2”× 14” (216 mm
× 356 mm) [max.]/3”× 5” (76 mm × 127 mm) [min.]
Paper Weight
17 lb to 34 lb (64 g/m2 to 128 g/m2)
Paper Type
Plain paper (20 Ib(75 g/m2)), Recycled paper (20 Ib(75
g/m2)), Plain paper L (18 Ib(64 g/m2)), Heavy paper (28
Ib(105 g/m2)), Heavy paper H (32 Ib(128 g/m2)),
Transparency, Label*, Envelope, Postcard.
* A label that can be loaded in the cassette is a standard type (label standard card) only.
NOTE
4
• The printing speed may become slower than usual depending on the paper size, the paper type, and the number of sheets you specify.
This is because the machine's safety function works to prevent the failure due to heat.
Paper Handling
• Some types of paper may not feed properly into the cassette or the multi-purpose feeder.
Printing Areas
Please note that the term “printing area” represents both the recommended area for optimum print quality and the entire
area where the machine can technically print from your computer.
Printing area (light shade): Canon recommends that you print within this area.
■ Paper
MAX. 13/64" (5 mm)
MAX. 13/64" (5 mm)
MAX. 13/64" (5 mm)
Feeding
direction
MAX. 13/64" (5 mm)
■ Envelope
MAX. 13/64" (5 mm)
MAX. 13/64" (5 mm)
MAX. 13/64" (5 mm)
Feeding
direction
MAX. 13/64" (5 mm)
NOTE
Copying areas are a little larger than printing areas.
4-2
Print Media Requirements
Loading Paper
This section describes how to load paper in the cassette and the multi-purpose feeder.
CAUTION
When loading paper, take care not to cut your hands on the edges of the paper.
NOTE
• The paper in the multi-purpose feeder is fed prior to the paper in the cassette.
• The cassette holds up to approx. 250 sheets of 17 lb (64 g/m2) paper or approx. 20 envelopes.
When the message appears in the LCD display, you need to add paper to the paper cassette.
Here are a few tips you should follow when you load paper into the paper cassette.
• Be sure to load paper of the correct size, weight, and quantity recommended for your machine.
• Stack the paper so that the top and bottom edges and sides are straight and even before placing it in the paper cassette.
• Do not print on both sides of the paper. Doing so may cause several sheets to feed into the machine at the same time.
• Let the paper run out before you refill the paper cassette.
• Avoid mixing new stock with paper already loaded in the paper cassette. When adding new stock to the cassette, be sure
to remove the remaining paper in the cassette and reload it together with the new stock. Failure to do so may cause paper
jams.
NOTE
• Do not use damp, curled, wrinkled, or torn paper as these can cause paper jams or poor print quality.
• Highly textured, extremely smooth or shiny paper does not print well.
• The laser printing process uses high temperatures to fuse toner to the paper. Use paper that will not melt, vaporize, discolor, or emit
•
•
•
•
dangerous fumes at temperatures near 340°F (170°C). For example, do not use vellum paper in a laser printer. Make sure any letterhead
or colored paper you use can withstand high temperatures.
Make sure the paper is free of dust, lint, and oil stains.
To keep the paper from curling, do not open paper packs until you are ready to use the paper. Store unused paper from opened packs in a
cool, dry location in the original packaging.
Your machine is factory-set to use LTR-size paper in the paper cassette.
If you wish to use different sized paper, you must change the setting using the menu.
See p. 15-2 for more details.
Do not load paper from the rear of the cassette under the dust cover.
.
Loading Paper in the Cassette
1
Fan the paper stack first, then tap the edges on a flat surface to even the stack.
Loading Paper
4-3
Paper Handling
4
2
Pull out the cassette completely.
NOTE
Do not load paper from the rear of the cassette.
3
Pinch and slide the length slide guide to fit the size of the paper stack you want to load.
4
Paper Handling
IMPORTANT
If the slide guides are not adjusted correctly for the size of the paper, the quality of your printouts may be adversely affected or jams may
occur.
4
Load the paper stack in the cassette with the print side down.
When you load paper with a logo on, position the paper with the print side down (logo side) and load it so that the top of the paper feeds
first in the cassette.
5
Pinch and slide the width slide guides to fit the paper stack.
Make sure the paper stack does not exceed the load limit mark located on the width slide guides.
4-4
Loading Paper
HOOK
HOOKS
LOAD LIMIT
MARK
HOOK
6
Insert the cassette into the machine.
NOTE
If you do not completely insert the cassette into the machine, paper jams may occur.
Do not load paper from the rear of the cassette.
Paper Handling
7
4
Specify the paper size and type.
❑ Press [Menu] ➞ [Set].
❑ Press [ (-)] or [ (+)] to select <1.CASSETTE> ➞ press [Set] twice.
❑ Press [ (-)] or [ (+)] to select the appropriate paper size ➞ press [Set] twice.
❑ Press [ (-)] or [ (+)] to select the appropriate paper type ➞ press [Set].
❑ Press [Stop/Reset] to return to standby mode.
IMPORTANT
• Do not load different size and type of paper at the same time.
• Do not load extra paper when there is still paper left in the cassette. If you load extra paper while printing, remove the loaded paper first.
Then put it together with the extra paper and tap the edges. After that, reload it in the cassette.
• Do not load paper from the rear of the cassette.
NOTE
• Select ‘ENVELOPE’ for envelopes. For details on loading envelopes in the cassette, see “Loading Envelopes in the Cassette,” on p. 4-5.
• For information on how to use non-standard size paper, see “Loading Paper in the Multi-Purpose Feeder,” on p. 4-8, or “Loading an
Envelope in the Multi-Purpose Feeder,” on p. 4-9.
• You must set the paper size and type from the operation panel.
Loading Envelopes in the Cassette
1
Arrange the stack of envelopes on a firm, clean surface, and press down firmly on the edges to make the folds crisp.
Press all the way around the envelopes to remove any curls and expel air from inside the envelopes. Also, press firmly on the area that
corresponds to the edges of the back flap.
Loading Paper
4-5
2
Remove any curling from the envelopes by holding the edges diagonally and bending them gently.
3
Run a pen or other rounded object along the back flaps to flatten them.
The flaps should not bulge more than 13/64” (5 mm).
FLAP
Paper Handling
4
4
Tap the edges on a flat surface to even the envelopes.
5
Pull out the cassette completely.
6
Pinch and slide the length slide guide to fit the size of the envelopes you want to load.
IMPORTANT
If the slide guides are not adjusted correctly for the size of the envelopes, the quality of your printouts may be adversely affected.
Do not load paper from the rear of the cassette.
7
Load the envelopes with the print side down and the flap comes toward the left of the cassette.
Envelopes with a flap on the short edge cannot be used.
4-6
Loading Paper
8
Pinch and slide the width slide guides to fit the envelopes.
Make sure the envelopes do not exceed the load limit mark.
HOOKS
HOOK
4
Paper Handling
LOAD LIMIT
MARK
HOOK
9
Insert the cassette into the machine.
IMPORTANT
A maximum of approx. 20 envelopes can be loaded in the cassette. Be sure that the envelopes do not exceed the load limit mark of the
paper guide. If the envelopes exceed the load limit mark, this may result in misfeeds.
NOTE
If you do not completely insert the cassette into the machine, paper jams may occur.
10
Specify the paper size and type.
❑ Press [Menu] ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <1.CASSETTE> ➞ press [Set] twice.
❑ Press [ (-)] or [ (+)] to select ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select the appropriate envelope type ➞ press [Set] twice.
❑ Press [ (-)] or [ (+)] to select or ➞ press [Set].
❑ Press [Stop/Reset] to return to standby mode.
NOTE
You must set envelope size through the operation panel.
Loading Paper
4-7
Loading Paper in the Multi-Purpose Feeder
Use the multi-purpose feeder when you want to copy or print on different paper which is in the cassette. Load paper one by
one in the multi-purpose feeder.
NOTE
The paper in the multi-purpose feeder is fed prior to the paper in the cassette.
1
Slide the slide guides to fit the size of the paper you want to load.
Paper Handling
4
IMPORTANT
If the slide guides are not adjusted correctly for the size of the paper, the quality of your printouts may be adversely affected or jams may
occur.
2
Insert the paper straightly into the multi-purpose feeder with the print side up.
NOTE
When you load paper with a logo on it, position the paper with the print side up (logo side) and insert it so that the top of the paper feeds
first in the multi-purpose feeder.
4-8
Loading Paper
3
Specify the paper size.
❑ Press [Menu] ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <2.MP TRAY> ➞ press [Set] twice.
❑ Press [ (-)] or [ (+)] to select the appropriate paper size ➞ press [Set] twice.
NOTE
• Select ‘ENVELOPE’ for envelopes. For details on loading an envelope in the multi-purpose feeder, see “Loading an Envelope in the
Multi-Purpose Feeder,” on p. 4-9.
• When is selected, you can specify vertical and horizontal sizes of the paper in the following ranges:
- : 127 mm to 356 mm (5” to14”)
- : 76 mm to 216 mm (3” to 8 1/2”)
4
Specify the paper type.
❑ Press [ (-)] or [ (+)] to select the appropriate paper type ➞ press [Set].
❑ Press [Stop/Reset] to return to standby mode.
4
Paper Handling
Loading an Envelope in the Multi-Purpose Feeder
Use the multi-purpose feeder when you want to copy or print an envelope one by one.
IMPORTANT
The recommended envelopes are COM10, MONARCH, DL, and ISO-C5. Using other envelopes may affect the quality of the printout.
NOTE
The envelope in the multi-purpose feeder is fed prior to the paper in the cassette.
1
Slide the slide guides to fit the size of the envelope you want to load.
IMPORTANT
If the slide guides are not adjusted correctly for the size of the envelope, the quality of your printouts may be adversely affected or jams
may occur.
Loading Paper
4-9
2
3
Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e., closer to the stamp)
first.
Envelopes with a flap on the short edge cannot be used.
Specify the paper size.
❑ Press [Menu] ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <2.MP TRAY> ➞ press [Set] twice.
❑ Press [ (-)] or [ (+)] to select ➞ press [Set].
4
Paper Handling
❑ Press [ (-)] or [ (+)] to select the appropriate envelope type ➞ press [Set] twice.
NOTE
You can select instead of as the paper size. When is selected, you can specify vertical and
horizontal sizes of the envelope in the following ranges:
- : 127 mm to 356 mm (5” to 14”)
- : 76 mm to 216 mm (3” to 8 1/2”)
4
Specify the paper type.
❑ Press [ (-)] or [ (+)] to select or ➞ press [Set].
❑ Press [Stop/Reset] to return to standby mode.
Testing the Machine
After you have assembled your machine, installed the toner cartridge, loaded paper, you can make sure the machine is
printing properly by making several copies of a document. For instructions, see Chapter 10, “Making Copies.”
Note the following:
• If the printed sheets are curled as they exit the machine, remove them from the output slot immediately to avoid paper
jams.
• Make sure your text or graphics fall within the printable area.
4-10
Loading Paper
Orientation of the Document and the Paper Loading
When you load a document in the ADF, the orientation of the document and the orientation of the paper in the cassette or in
the multi-purpose feeder are as shown below.
DOCUMENT
PAPER
MULTI-PURPOSE
FEEDER
4
COPY
Paper Handling
CASSETTE
Loading Paper
4-11
Selecting the Paper Output Area
Face down paper output delivers paper with the printed side down on the output tray. Face up paper output delivers paper
with the printed side up out of the face up paper output. Select the area depending on your purpose by opening or closing
the face up cover on the back of the machine.
Open the face up cover for face up paper output, or close the face up cover for face down paper output.
Paper Handling
4
IMPORTANT
Do not open or close the face up cover while copying and printing.
Paper Type and Paper Output Area
Select the suitable paper output area depending on the paper type and your purpose.
Paper Type
Paper Output Area
The Number of Output Sheets
face up
1 sheet
face down
approx. 50 sheets
(17 lb to 20 lb (64 g/m2 to 75 g/m2))
Plain Paper L
face up
1 sheet
face down
approx. 50 sheets
(20 lb to 24 lb (75 g/m2 to 90 g/m2))
face up
1 sheet
face down
approx. 30 sheets
(24 lb to 28 lb (91 g/m2 to 105 g/
m2))
Plain Paper
Heavy Paper
face up
1 sheet
face down
approx. 30 sheets
(28 lb to 34 lb (106 g/m2 to 128 g/
m2))
face up
1 sheet
face down
approx. 10 sheets
Heavy Paper H
Transparencies
4-12
Selecting the Paper Output Area
Face Down Paper Output Area
The paper is delivered with the printed side down on the output tray.
Paper is stacked in printed order.
Close the face up cover.
4
IMPORTANT
Paper Handling
• Do not place the delivered paper back on the output tray. Doing so may result in paper jams.
• Do not place objects other than paper on the output tray. Doing so may result in paper jams.
• It is recommended to fold up the output tray when printing many pages.
Face Up Paper Output Area
The paper is delivered with the printed side up out of the face up paper output on the back side of the machine. This way is
convenient for printing on transparencies, envelopes, or labels which tend to curl, because the paper is delivered straight
through the machine.
Open the face up cover on the back of the machine.
• Remove the delivered paper one by one.
IMPORTANT
• Do not pull the paper forcibly.
• The machine has no face up output tray. Remove the delivered paper with your hand.
• Do not place an object in front of the face up paper output to prevent a paper jam.
Selecting the Paper Output Area
4-13
Paper Handling
4
4-14
Selecting the Paper Output Area
5
Speed Dialing
CHAPTER
This chapter describes how to register and use the speed dialing features of the machine.
Speed Dialing Methods
In addition to regular dialing, the machine provides several ways to dial fax/telephone numbers automatically.
■ One-Touch Speed Dialing
Dial a fax/telephone number by pressing the One-Touch Speed Dial button that the number is assigned to.
■ Coded Speed Dialing
Dial a fax/telephone number by pressing [Coded Dial] followed by a two-digit code assigned to that number.
■ Group Dialing
Send a document to a pre-defined group of fax numbers. (The numbers must already be stored as One-Touch Speed Dialing numbers or
Coded Speed Dialing numbers.)
■ Directory Dialing
Dial a fax/telephone number by pressing [Directory] and entering the first letter of the other party's name. In this manner you can search for
the fax/telephone number registered for One-Touch Speed Dialing.
The following pages describe how to register numbers for speed dialing. You will also find instructions for changing numbers
and names registered under speed dialing buttons and codes, and how to use speed dialing.
Speed Dialing Methods
5-1
One-Touch Speed Dialing
Storing Numbers for One-Touch Speed Dialing
Your machine can store up to 32 fax numbers under One-Touch Speed Dial buttons. Follow this procedure to store
One-Touch Speed Dialing numbers and names.
Speed Dialing
5
1
Press [Menu].
2
Use [
3
4
(-)] or [
(+)] to select <5.ADD. REGISTRATION> ➞ press [Set] twice.
Press [ (-)], [ (+)], or the One-Touch Speed Dial button to select a One-Touch Speed Dial button under which you want to
register a fax/telephone number between 01 and 32 ➞ press [Set] twice.
• If a number is already stored under the button you select, that number appears.
• If the button you select is registered for Group Dialing, appears.
Use the numeric buttons to enter the telephone number (max. 120 digits, including spaces and pauses) ➞ press [Set] twice.
TEL NUMBER ENTRY
TEL=123xxxx
➞
:A
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• Open the One-Touch Speed Dial panel ➞ press [Space] to enter spaces between numbers (spaces are optional and are ignored during
dialing).
• To enter a pause in the number, press [Redial/Pause] one or more times (See p.9-1).
5
6
Use the numeric buttons to enter the name you want to store (max. 16 letters, including spaces) ➞ press [Set].
• For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
To continue registering numbers, repeat steps 3 to 5.
-orIf you have finished registering numbers, press [Stop/Reset] to return to standby mode.
7
After you register a number for One-Touch Speed Dialing, it is recommended to write the name of the other party on a
destination label and stick it on the One-Touch Speed Dial panel above the number of the One-Touch Speed Dial button where
the number is registered.
NOTE
You may need to insert a pause if you are trying to access on outside line or you are making an international call. (See p.9-1)
5-2
One-Touch Speed Dialing
Changing or Deleting a Number/Name Stored Under a One-Touch
Speed Dial Button
Follow these steps if you want to change a number and/or name registered under a One-Touch Speed Dial button, or if you
want to delete all information stored under a button.
1
2
Follow steps 1 and 2 of “Storing Numbers for One-Touch Speed Dialing.” (See p. 5-2.)
Use [ (-)], [ (+)], or the One-Touch Speed Dial button to select the One-Touch Speed Dial button you want to change or delete
➞ press [Set] twice.
● To delete a number:
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the number ➞ press [Set].
TEL NUMBER ENTRY
TEL=
➞
5
1-TOUCH SPD DIAL
2.NAME
Speed Dialing
3
❑ When you delete a number, the name registered for that number is also deleted.
4
Press [Stop/Reset] to return to standby mode.
● To change the number and/or name:
3
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the previous entry.
4
Press the numeric buttons to enter the new number ➞ press [Set] twice.
TEL NUMBER ENTRY
TEL=124xxxx
➞
:A
Canon Canada
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• If you want to delete a digit, press [ (-)] or [ (+)] to move the cursor under the digit you want to delete ➞ press [Delete].
• If you only want to change the name, press [Set] twice after step 2 ➞ open One-Touch Speed Dial panel ➞ go to step 5.
5
6
7
Press [Clear] to delete the previous entry.
Press the numeric buttons to enter the new name ➞ press [Set].
• For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• If you want to keep the same name, go to step 7.
To change additional numbers and/or names, repeat steps 2 to 6.
-orIf you have finished changing numbers and/or names, press [Stop/Reset] to return to standby mode.
One-Touch Speed Dialing
5-3
Using One-Touch Speed Dialing
Once you have registered your numbers under One-Touch Speed Dial buttons, you can use them to send documents as
follows:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on
p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
5
Speed Dialing
4
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Press the One-Touch Speed Dial button assigned to the number to which you wish to fax.
TEL=
123xxxx
04 Canon USA
• The name registered under that One-Touch Speed Dial button is displayed. If no name is registered, the number registered under that
button will be displayed.
• If you mistakenly press the wrong One-Touch Speed Dial button, press [Stop/Reset] ➞ press the correct button.
• If no fax number is assigned to the One-Touch Speed Dial button you press, the LCD displays . If this happens,
make sure you press the correct button and that the number you want to dial is registered under that button.
5
Press [Start].
• If you do not press [Start] within 5 seconds of pressing the One-Touch Speed Dial button, the machine will begin sending automatically.
If you do not want the machine to send automatically, you need to change the setting. See p.15-9 for more details.
• If an error occurs during sending, the machine will print an error report. If this happens, try sending the fax again. See “Faxing
Problems,” on p. 13-12 for details about errors.
NOTE
• You can also use One-Touch Speed Dialing to send a document to more than one location at a time. For details, see “Group Dialing,” on
p. 5-8, and “Sequential Broadcasting,” on p. 6-12.
• Changing image quality can affect transmission times.
5-4
One-Touch Speed Dialing
Coded Speed Dialing
Storing Numbers for Coded Speed Dialing
You can store up to 100 numbers for Coded Speed Dialing. Follow this procedure to store Coded Speed Dialing numbers
and names.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <5.ADD. REGISTRATION> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <2.CODED SPD DIAL> ➞ press [Set].
4
Press [ (-)] or [ (+)] to select a two-digit code (00-99) ➞ press [Set] twice.
• You can also select a code by pressing [Coded Dial] and entering the two-digit code with the numeric buttons.
• If a number is already registered under the code you select, that number is displayed.
• If the code you select is registered for group dialing, appears.
5
Use the numeric buttons to enter the telephone number (max. 120 digits, including spaces and pauses) ➞ press [Set] twice.
TEL NUMBER ENTRY
TEL=456xxxx
Speed Dialing
5
:A
➞
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• Open the One-Touch Speed Dial panel ➞ press [Space] to enter spaces between numbers (spaces are optional and are ignored during
dialing).
• To enter a pause in the number, press [Redial/Pause] one or more times (See p.9-1).
6
Use the numeric buttons to enter the name you want to store (max. 16 letters, including spaces) ➞ press [Set].
:A
Canon OPTICS
➞
CODED SPD DIAL
03=
• For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
7
To continue registering numbers, repeat steps 4 to 6.
-orIf you have finished registering numbers, press [Stop/Reset] to return to standby mode.
Coded Speed Dialing
5-5
Changing or Deleting a Number/Name Stored under a Coded
Speed Dialing Code
Follow these steps if you want to change the number and/or name registered under a Coded Speed Dialing code, or if you
want to delete all information stored under a code.
1
Follow steps 1 to 3 of “Storing Numbers for Coded Speed Dialing.” (See p. 5-5.)
2
Press [
(-)] or [
(+)] to select the code (00-99) you want to change or delete ➞ press [Set] twice.
You can also select a code by pressing [Coded Dial] and entering the two-digit code with the numeric buttons.
● To delete a number:
3
5
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the number ➞ press [Set].
Speed Dialing
TEL NUMBER ENTRY
TEL=
➞
CODED SPD DIAL
2.NAME
When you delete a number, the name registered for that number is also deleted.
4
Press [Stop/Reset] to return to standby mode.
● To change the number and/or name:
3
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the previous entry.
4
Press the numeric buttons to enter the new number ➞ press [Set] twice.
TEL NUMBER ENTRY
TEL=457xxxx
➞
:A
Canon CANADA
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• If you want to delete a digit, press [W(-)] or [X(+)] to move the cursor under the digit you want to delete ➞ press [Delete].
• If you only want to change the name, press [Set] twice after step 2 ➞ open One-Touch Speed Dial panel ➞ go to step 5.
5
Press [Clear] to delete the previous entry.
6
Press the numeric buttons to enter the new name ➞ press [Set].
:A
Canon ITALIA
7
➞
CODED SPD DIAL
03=
• For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• If you want to keep the same name, go to step 7.
To change additional numbers and/or names, repeat steps 2 to 6.
-orIf you have finished changing numbers and/or names, press [Stop/Reset] to return to standby mode.
5-6
Coded Speed Dialing
Using Coded Speed Dialing
Once you have registered your numbers under Coded Speed Dialing codes, you can send documents as follows:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on
p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Press [Coded Dial] ➞ use the numeric buttons to enter the two-digit code assigned to the number to which you wish to fax.
TEL=
➞
TEL=
456xxxx
04 Canon CANADA
• The name registered under that Coded Speed Dialing code is displayed. If no name is registered, the number registered under that
code will be displayed.
• If you mistakenly enter the wrong code, press [Stop/Reset] ➞ [Coded Dial] ➞ enter the correct code.
• If no fax number is assigned to the Coded Speed Dialing code you press, the LCD displays . If this happens,
make sure you enter the correct code and that the number you want to dial is registered under that code.
5
Press [Start].
• If you do not press [Start] within 5 seconds of entering the Coded Speed Dialing code, the machine will begin sending automatically. If
you do not want the machine to send automatically, you need to change the setting. See p.15-9 for more details.
• If an error occurs during sending, the machine will print an error report. If this happens, try sending the fax again. See “Faxing
Problems,” on p. 13-12 for details about errors.
NOTE
You can also use Coded Speed Dialing to send a document to more than one location at a time. For details, see “Group Dialing,” on p. 5-8,
and “Sequential Broadcasting,” on p. 6-12.
Coded Speed Dialing
5-7
Speed Dialing
5
4
Group Dialing
Group dialing allows you to store as many as 131 numbers under One-Touch Speed Dial buttons or Coded Speed Dialing
codes.
Creating Groups for Group Dialing
The numbers you register in a group must already be stored under One-Touch Speed Dial buttons or Coded Speed Dialing
codes. Each group is stored under a One-Touch Speed Dial button or a Coded Speed Dialing code. Create groups for
group dialing as follows:
Speed Dialing
5
1
Press [Menu].
2
Use [
(-)] or [
(+)] to select <5.ADD REGISTRATION> ➞ press [Set].
3
Use [
(-)] or [
(+)] to select <3.GROUP DIAL> ➞ press [Set].
● To register a group under a One-Touch Speed Dial button:
4
Use [ (-)], [
[Set] twice.
(+)], or the One-Touch Speed Dial button to select an unused One-Touch Speed Dial button (01 to 32) ➞ press
If a group or number is already registered under the button you select, or <1-TOUCH SPD DIAL> is displayed.
● To register a group under a Coded Speed Dialing code:
4
Press [Coded Dial] ➞ use the numeric buttons to enter an unused two-digit code (00 to 99) ➞ press [Set] twice.
GROUP DIAL
21=
➞
TEL=
• If a group or number is already registered under the code you select, or is displayed.
• To continue storing under a Coded Speed Dialing code, you can use [ (-)] or [ (+)] also.
NOTE
• Each One-Touch Speed Dial button or Coded Speed Dialing code can store either a name and number for speed dialing, or a group. Be
careful not to override speed dialing numbers and names when creating groups.
• If you wish to register a group under a One-Touch Speed Dial button or Coded Speed Dialing code already registered for speed dialing, or
if you want to re-enter a group, you must delete the previous information first. See p. 5-3 for more details.
5
Select the speed dialing numbers you want to register in the group ➞ press [Set] twice.
• To enter in the group a number stored under a One-Touch Speed Dial button, press the desired One-Touch Speed Dial button(s).
• To enter a number stored under a Coded Speed Dialing code, press [Coded Dial] ➞ enter the two-digit code for the number using the
numeric buttons. For multiple entries, press [Coded Dial] between each entry.
NOTE
• You cannot register numbers in the groups that have not been registered for One-Touch or Coded Speed Dialing.
• You can review the numbers registered under the group by pressing [ (-)] or [ (+)].
5-8
Group Dialing
6
Enter the name using the numeric buttons for the group (max. 16 letters, including spaces) ➞ press [Set].
:A
USA GROUP
➞
GROUP DIAL
22=
For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
7
To enter additional groups, repeat steps 4 to 6.
-orIf you have finished registering groups, press [Stop/Reset] to return to standby mode.
Changing or Deleting a Number/Name Stored under a Group
Dialing
Follow these steps if you want to change or delete the number/name registered under a Group Dialing.
1
5
Follow steps 1 to 3 of “Creating Groups for Group Dialing” (See p. 5-8.)
2
3
Press [
(-)] or [
Speed Dialing
● To delete a number and a name:
(+)] to select the number you want to delete ➞ press [Set] twice.
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the numbers registered under the group.
• Press [ (-)] or [ (+)] to select the numbers you want to delete.
4
Press [Set] twice.
5
Press [Clear] to delete the name ➞ press [Set].
6
Press [Stop/Reset] to return to standby mode.
● To change the number and/or name:
2
Press [
3
Press [Clear] to delete the numbers registered under the group.
4
(-)] or [
(+)] to select the number you want to change ➞ press [Set] twice.
Select the speed dialing numbers you want to register in the group ➞ press [Set] twice.
• To enter in the group a number stored under a One-Touch Speed Dial button, press the desired One-Touch Speed Dial button(s).
• To enter a number stored under a Coded Speed Dialing code, press [Coded Dial] ➞ enter the two-digit code for the number using the
numeric buttons. For multiple entries, press [Coded Dial] between each entry.
NOTE
• You cannot register numbers in the groups that have not been registered for One-Touch or Coded Speed Dialing.
• You can review the numbers registered under the group by pressing [ (-)] or [ (+)].
5
6
Press [Clear] to delete the name.
Press the numeric buttons to enter the new name ➞ press [Set]
• For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
Group Dialing
5-9
7
To change additional groups, repeat steps 2 to 6.
-orIf you have finished registering groups, press [Stop/Reset] to return to standby mode.
Using Group Dialing
To send a document to a group of numbers, follow these instructions.
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on
p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
5
Speed Dialing
3
4
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Enter the group(s) stored under a One-Touch Speed Dial button(s) and/or Coded Speed Dialing code(s).
TEL=GROUP DIAL
03 USA GROUP
TEL=GROUP DIAL
21 USA GROUP
• If you make a mistake when selecting a group, press [Stop/Reset] ➞ start again.
• The name registered under that One-Touch Speed Dial button or Coded Speed Dialing code is displayed.
• If you press a One-Touch Speed Dial button or Coded Speed Dialing code that has no group (or fax number) registered under it, the
•
5
LCD displays . Make sure that you press the correct One-Touch Speed Dial button or enter the correct Coded
Speed Dialing code, and that the group you want has been registered correctly under that button or code.
After entering the first One-Touch Speed Dial button or Coded Speed Dialing code, you have 5 seconds to enter another speed dialing
button or code before the machine begins sending automatically. If you have entered more than one speed dialing button or code, the
machine waits for 10 seconds before it begins sending. If you do not want the machine to send automatically, you need to change the
setting. See p.15-9 for more details.
Press [Start].
The machine then scans the document into memory, and begins dialing the numbers in the groups.
5-10
Group Dialing
Directory Dialing
Directory dialing allows you to look up the other party's name you registered and retrieve the number for dialing. This
feature is convenient when you know the other party's name but can not recall the One-Touch Speed Dial button, the code
for Coded Speed Dialing, or Group Dialing where the number is registered.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
5
Press [Directory].
Speed Dialing
2
:A
_
appears if there are no numbers registered, and the display returns to dial entry mode.
3
Press a numeric button to enter the first letter of the name of the party you are searching for.
For example, if you want to search for a name that starts with the letter “H”, press [4 (GHI)] twice.
4
5
6
Press [Set].
• Entries starting with the letter you entered are displayed.
• If there is no entry that starts with the letter you entered, entries that start with the next letter will be displayed.
Press [ (-)] or [ (+)] to display the other names.
• Pressing [ (+)] displays the names of other parties in alphabetical order.
Pressing [ (-)] displays them in reverse order.
• When you reach the last name, the display returns to the first name.
Press [Set].
The other party’s fax number and name, or and the group's name appear.
Directory Dialing
5-11
Speed Dialing
5
5-12
Directory Dialing
6
Sending Faxes
CHAPTER
This chapter describes how to use your machine to send faxes.
Preparing to Send a Fax
Document Requirements
The documents you load into the machine must meet the following requirements.
When loading a multi-page document:
Size:
Max.: 8 1/2” × 14” (216 × 356 mm)
(W × L)
Min.: 5 13/16” × 4 1/8” (148 × 105 mm)
Quantity:
Up to 50 letter-size, 50 A4-size, or 20 legal-size sheets
(1 sheet for sizes other than these)
Thickness
0.003” - 0.005” (0.07 – 0.13 mm)
(For sheet thicker than this, load 1 sheet at a time)
All sheets should be of the same thickness.
Weight:
13 lb – 28 lb (50 – 105 g/m2)
All sheets should be of the same weight.
When loading a single-page document:
Size:
Max.: 8 1/2” × approx.39 3/8” (216 mm × approx.1 m)
(W x L)
Min.: 5 53/64” × 4 9/64” (148 × 105 mm)
Quantity
1 sheet
Thickness
0.002” – 0.009” (0.06 – 0.23 mm)
Weight:
13 lb – 64 lb (50 – 240 g/m2)
Preparing to Send a Fax
6-1
■ Problem documents
• To prevent paper jams in the Automatic Document Feeder (ADF), do not use any of the following paper in the machine:
6
WRINKLED OR
CREASED PAPER
CURLED OR
ROLLED PAPER
TORN PAPER
CARBON PAPER OR
CARBON-BACKED
PAPER
COATED PAPER
ONION SKIN OR
THIN PAPER
Sending Faxes
• Remove all staples, paper clips, or any other fasteners before loading the document into the Automatic Document Feeder
(ADF).
• Make sure any glue, ink, or correction fluid on the paper is completely dry before loading the document into the Automatic
Document Feeder (ADF).
• If you have a document that will not feed into the machine properly, make a photocopy of the document, then load the
copy instead.
Scanning Area
The margins shown in the illustration below are outside the machine’s scanning area. Make sure your document’s text and
graphics do not extend into these margins.
MAX. 5/32" (4.0 mm)
LTR
MAX. 5/32" (4.0 mm)
MAX. 1/8" (3.0 mm)
6-2
Preparing to Send a Fax
MAX. 5/32" (4.0 mm)
Loading Documents in the ADF
1
2
Fan the edges that will feed into the machine first, then tap the edges of multiple page documents on a flat surface to even the
stack.
Adjust the document guides to the width of the document.
Sending Faxes
6
3
Load the document faced down in the ADF.
The document is now ready for scanning.
NOTE
• For multiple page documents, the pages are fed one by one from the top of the stack (from the first page).
• Wait until all pages of your document have been scanned before starting a new job.
• 50 sheets of LTR-size documents or 20 sheets of LGL-size documents can be set in the ADF. If more than 50 sheets of LTR-size
documents or 20 sheets of LGL-size documents are set in the ADF, paper jams may occur.
Preparing to Send a Fax
6-3
● Trouble With Multipage Documents
❑ If you have any trouble in feeding a multipage document, do the following:
6
1
Remove the stack and tap it on a flat surface to even the edges.
2
Gently insert the stack into the Automatic Document Feeder (ADF) until it stops.
NOTE
Sending Faxes
• If you have further trouble with page jams while feeding, see “Removing Jammed Paper from the ADF,” on p. 13-6.
• Wait until all pages of your document have been scanned completely before starting a new job.
Adjusting the Resolution and Contrast
Adjusting the Image Quality (Resolution)
Canon’s Ultra High Quality (UHQ™) imaging technology enables you to send faxes with a print quality that is very close to
that of the original document. The machine also lets you adjust the resolution it uses in sending faxes to best suit your
particular document.
The machine has 5 resolution settings:
• is adequate for most text documents.
• is suitable for documents with fine print (smaller than the print in this sentence).
• is for documents that contain photographs. With this setting, areas of the document that contain photos are
automatically scanned with 256 levels of gray, rather than just two (black and white). This gives a much better
reproduction of the photos, though transmission time is longer.
• is for documents that contain fine print and images (much smaller than the print in this sentence), and its
resolution is four times of .
• is for documents that contain fine print and images (much smaller than the print in this sentence), and its
resolution is eight times of .
6-4
Preparing to Send a Fax
Set the resolution as follows:
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Image Quality].
The LCD display shows the current resolution setting.
3
Press [Image Quality] repeatedly until the resolution you want is displayed ➞ press [Set].
FAX RESOLUTION
4
12/31/2004 FRI 10:00
FINE ➞ FaxOnly
FINE
Continue with the operation you wish to complete.
If you do not proceed with any other operation, the LCD display returns to standby mode.
6
Adjusting the Exposure (Density)
Sending Faxes
You can adjust the lightness/darkness of the document pages before you scan for sending.
You can select the scanning density from the following:
• for documents with dark text or color.
• for normal printed or written text.
• for documents with light text or color.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Exposure].
The LCD display shows the current exposure setting.
3
Press [Exposure] repeatedly until the scanning density you want is displayed ➞ press [Set].
DENSITY CONTROL
4
12/31/2004 FRI 10:00
DARK ➞ FaxOnly
STANDARD
Continue the operation you wish to complete.
If you do not proceed with any other operation, the LCD display returns to standby mode.
NOTE
• You can set the scanning density so that the desired scanning density such as ‘STANDARD’ is automatically returned after the function activates or documents are scanned. Since of is set to 'OFF' in the factory default
setting, the scanning density set using [Exposure] will remain unchanged. (See Chapter 15, “The Menu System.”)
You can set the level of each scanning density (LIGHT/STANDARD/DARK) in the of the Menu. (See Chapter 15,
“The Menu System.”)
Preparing to Send a Fax
6-5
Sending Methods
Memory Sending
To use memory sending, you load the document, dial the fax number ➞ press [Start]. See p. 6-7 for more details on
memory sending.
Since the machine is multitasking, you can even scan a document into the memory while sending a document, receiving a
document, or printing a report.
Manual Sending Via the Handset
Use manual sending via the handset if you want to speak with the other party before sending a fax to them. With manual
sending via the handset, dial and converse normally, and when they are ready to receive your fax, press [Start] to begin
sending. See p. 6-8 for more details on manual sending via the handset.
Dialing Methods
There are several ways of dialing the number of the party you want to send to:
■ Regular Dialing
6
Sending Faxes
Use the numeric buttons to dial the recipient’s fax number.
■ One-Touch Speed Dialing
Press the One-Touch Speed Dial button (1 to 32) under which you have registered the number you want to send to. See Chapter 5, “Speed
Dialing,” for details on registering and using One-Touch Speed Dialing.
■ Coded Speed Dialing
Press [Coded Dial] ➞ enter the two-digit code (00 to 99) under which you have registered the number you want to send to. See Chapter 5,
“Speed Dialing,” for details on registering and using Coded Speed Dialing.
■ Group Dialing
Send a document to a pre-defined group of fax numbers. (The numbers must already be stored as One-Touch Speed Dialing numbers or
Coded Speed Dialing numbers.) See Chapter 5, “Speed Dialing,” for details on registering and using Group Dialing.
■ Directory Dialing
Press [Directory] ➞ enter the first letter of the other party’s name and retrieve the number for dialing. See Chapter 5, “Speed Dialing,” for
details on how to use Directory Dialing.
6-6
Preparing to Send a Fax
Sending Documents
This section describes the different ways to send faxes with the machine.
Memory Sending
You should normally use memory sending to send documents efficiently. If is displayed, the machine
cannot scan the documents. In this case, wait for the machine to send any faxes stored in the memory, then scan the
documents.
NOTE
Follow this procedure for memory sending:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on
p. 6-1, and “Loading Documents in the ADF” on p. 6-3.
2
Press [FAX].
If you are already in the FAX standby mode, you can skip this step.
3
4
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Dial the other party’s fax/telephone number.
For details on the different dialing methods, see “Dialing Methods,” on p. 6-6.
5
Press [Start].
NOTE
To cancel memory sending, press [Stop/Reset]. (See Chapter 11, “System Monitor.”)
Sending Documents
6-7
6
Sending Faxes
You can register a new fax job while the machine is waiting to redial the other party’s number automatically. For details on how to set the
machine to redial automatically, see “Automatic Redialing With Memory Sending,” on p. 6-10.
Manual Sending Via the Handset
Use manual sending when you want to talk to the other party before sending a document, or if the other party does not
have a fax machine that can receive automatically.
Follow this procedure for manual sending:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on
p. 6-1, and “Loading Documents in the ADF” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
Sending Faxes
6
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
4
Pick up the handset.
5
Dial the other party’s fax/telephone number.
For details on the different dialing methods, see “Dialing Methods,” on p. 6-6.
6
Talk through the handset to the other party.
If you hear a high-pitched signal instead of the other party’s voice, go to step 8.
7
Ask the other party to set their fax machine to receive faxes.
8
When you hear a high-pitched signal, press [Start] ➞ hang up the handset.
NOTE
To cancel manual sending, press [Stop/Reset].
6-8
Sending Documents
Canceling Sending
Canceling Memory Sending
While Documents Are Being Scanned Using the ADF
1
Press [Stop/Reset].
Scanning is canceled.
After All Documents Are Scanned
6
While documents are being sent, press [Stop/Reset].
Sending Faxes
1
The machine asks you to confirm that you want to cancel.
CANCEL DURING TX/RX?
< YES
NO >
2
Press [ (-)] to cancel sending.
• If you change your mind and want to continue sending, press [ (+)] for .
• The machine prints an ERROR TX REPORT if a transmission report is set to print automatically. (See “1.TX REPORT,” on p. 15-7.)
Canceling Sending
6-9
Redialing
Manual Redialing
To redial the last number dialed with the numeric buttons, press [Redial/Pause].
To cancel manual redialing, press [Stop/Reset] ➞ [ (-)].
Automatic Redialing With Memory Sending
With memory sending, you can set the machine to automatically dial the fax number again if the receiving fax machine
does not answer or if the line is busy. You can also control how many times the machine will redial the number and how long
it will wait between dialing attempts.
6
Sending Faxes
Canceling Automatic Redialing
If you press [Stop/Reset] when waiting to redial, the LCD displays standby mode but you are still in automatic redialing. To
cancel redialing while the machine is waiting to redial, follow the procedure described in “Deleting a Fax Job,” on p.11-2. To
cancel while the machine is redialing, do the following:
❑ Wait until the machine begins redialing.
❑ Press [Stop/Reset] ➞ [ (-)].
NOTE
The machine can print a list of document stored in memory (DOCUMENT MEMORY LIST), along with the transaction number of each
document. The document waiting to be sent using automatic redialing will be listed as . To print the list, see “Document
Memory List,” on p. 12-10.
Setting Up Automatic Redialing
You can set up the following options for automatic redialing:
• Whether or not the machine redials automatically
• The number of times the machine attempts redialing
• The time interval between redialing attempts
6-10
Redialing
Follow the procedure below to adjust the automatic redialing settings.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <3.TX SETTINGS> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select <3.AUTO REDIAL> ➞ press [Set].
5
Press [ (-)] or [ (+)] to select to enable automatic redialing or to disable it ➞ press [Set].
• If you selected : Go to step 6.
• If you selected : Go to step 8.
AUTO REDIAL
ON ➞
AUTO REDIAL
1.REDIAL TIMES
6
Press [Set] again ➞ use [
press [Set] twice.
REDIAL TIMES
7
Press [
(-)], [
(-)], [
(+)], or the numeric buttons to enter the number of times you want the machine to redial ➞
02TIMES ➞
REDIAL INTERVAL
02MIN.
(+)], or the numeric buttons to select the time interval between redialings ➞ press [Set].
REDIAL INTERVAL
TX SETTINGS
02MIN. ➞ 4.TIME OUT
8
Press [Stop/Reset] to return to standby mode.
Redialing
6-11
Sending Faxes
6
Sequential Broadcasting
Sending a Document to More Than One Destination
The machine’s sequential broadcasting feature allows you to send a fax to a sequence of up to 142 fax numbers, using any
combination of dialing methods as follows:
• One-Touch Speed Dialing: up to 32 destinations
• Coded Speed Dialing: up to 100 destinations
• Regular dialing and redialing: 10 destinations
(with the numeric buttons or [Redial/Pause])
You can enter the One-Touch Speed Dialing and Coded Speed Dialing destinations in any order. You can also include one
destination that you dial manually using the numeric buttons or [Redial/Pause]. Be sure to press [Set] after your entry with
the numeric keys.
6
Sending Faxes
To send a fax to more than one location, do the following:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on
p. 6-1, and “Loading Documents in the ADF” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
6-12
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Sequential Broadcasting
4
Enter up to 142 fax destinations using any of the following methods:
● One-Touch Speed Dialing:
❑ Press the desired One-Touch Speed Dial button(s).
● Coded Speed Dialing:
❑ Press [Coded Dial] ➞ enter the two-digit code (00-99) using the numeric buttons.
• Be sure to press [Coded Dial] before each code.
● Directory Dialing:
❑ Press [Directory] ➞ enter the first letter of the name of the party you are searching for.
● Regular Dialing:
❑ Enter the number using the numeric buttons or [Redial/Pause].
• Be sure to press [Set] after your entry with the numeric keys.
NOTE
• If you make a mistake, open One-Touch Speed Dial panel ➞ [Delete] to delete the last number, or press [Clear] to delete all numbers you
entered when you use the numeric keys.
• After entering the first One-Touch Speed Dial button or Coded Speed Dialing code, you have 5 seconds to enter another speed dialing
5
Press [Start].
The machine then scans the document into memory, and begins sending it to the destinations in numerical order, starting with the
One-Touch Speed Dialing numbers, then the Coded Speed Dialing numbers, and finally the numbers dialed with the numeric buttons or
[Redial/Pause].
NOTE
• If the machine memory becomes full while scanning your document, appears in the LCD display. If this happens,
•
•
remove the remainder of the document from the Automatic Document Feeder (ADF).Then divide the document into several sections and
send each section separately.
Only one broadcasting job will be active at any given time.
To cancel sending, press [Stop/Reset] ➞ follow the instructions in the LCD display. When you press [Stop/Reset], sending to all recipients
will be canceled. You cannot cancel sending to only one recipient. (See Chapter 11, “System Monitor.”)
Sending a Document Using Group Dialing
If you frequently send faxes to the same group of people, you can create a “group.” Groups are stored under One-Touch
Speed Dial buttons or Coded Speed Dialing codes. See Chapter 5, “Speed Dialing,” for details on registering numbers
under groups and using Group Dialing.
Sequential Broadcasting
6-13
6
Sending Faxes
•
button or code before the machine begins sending automatically. If you have entered more than one speed dialing button or code, the
machine waits for 10 seconds before it begins sending. If you do not want the machine to send automatically, you need to change the
setting. See p. 15-9 for more details.
If you want to review the numbers you entered, use the [ (-)] or [ (+)] to scroll through the numbers.
Delayed Sending
Your machine allows you to scan a document into its memory and send it automatically at a preset time. By using this
feature, you can take advantage of lower long distance rates at night, for example.
You can set up to 142 destinations and up to 20 reservations for delayed sending.
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on
p. 6-1, and “Loading Documents in the ADF” on p. 6-3.
2
6
Press [FAX].
Sending Faxes
If you are already in the Fax standby mode, you can skip this step.
3
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
4
Open One-Touch Speed Dial panel ➞ press [Delayed Transmission].
5
Use the numeric buttons to enter the time at which you want to send the document ➞ press [Set].
DELAYED TX
TEL=
TX TIME SETTNG 10:00 ➞
Enter the time using the 24-hour clock system. Precede single digits with a zero.
Example:
7:30 a.m. = 07:30
11:30 p.m. = 23:30
6
Enter the destination(s) using any of the following 4 methods.
● One-Touch Speed Dialing:
❑ Press the desired One-Touch Speed Dial button(s).
● Coded Speed Dialing:
❑ Press [Coded Dial] ➞ enter the two-digit code (00-99) using the numeric buttons.
• Be sure to press [Coded Dial] before each code.
● Directory Dialing:
❑ Press [Directory] ➞ enter the first letter of the name of the party you are searching for.
● Regular Dialing:
❑ Enter the number using the numeric buttons or [Redial/Pause].
• You can enter 10 numbers.
• Be sure to press [Set] after your entry with the numeric buttons.
NOTE
If you make a mistake, open One-Touch Speed Dial panel ➞ [Delete] to delete the last number, or press [Clear] to delete all numbers you
entered when you use the numeric buttons.
6-14
Delayed Sending
Press [Start].
The machine scans the document into memory.
NOTE
• If the machine memory becomes full while scanning your document, appears in the LCD display. If this happens, you
cannot send the document at a delayed time.
• You can only register one preset sending operation at a time.
• The machine is a multitasking machine, so you can send, receive, print, and copy other documents even when you have set the machine
for delayed sending.
• To print, copy, or send other documents after setting the machine for delayed sending, simply follow the procedures described in this Basic
Guide.
• To cancel a delayed sending, see “Deleting a Fax Job,” on p.11-2.
• The machine can print a list of document stored in memory (DOCUMENT MEMORY LIST), along with the transaction number of each
document. The document to be sent using delayed sending will be listed as or . To print the list, see
“Document Memory List,” on p. 12-10.
When the set time comes, the machine dials and sends the document.
6
Sending Faxes
7
Delayed Sending
6-15
Sending Faxes
6
6-16
Delayed Sending
7
Receiving Faxes
CHAPTER
This chapter describes how to use your machine to receive faxes.
Different Ways to Receive a Fax
The machine provides you with 5 different modes for receiving faxes. To decide which mode will best suit your requirements,
consider how you want to use the machine:
Receive Mode
Main Use
Operation
Requirements
FaxOnly*
Fax
Answers all calls as fax calls. It
receives faxes automatically and
disconnects voice calls.
Separate telephone line for fax use
only.
FaxTel
Fax/Tel
Automatically switches between fax
calls and voice calls. Receives faxes
automatically and rings for voice calls.
To set the details see p. 7-2.
Handset or telephone connected to the
machine.
Manual
Tel
Rings for every call, whether it is a fax
call or a voice call. For a fax call, you
have to manually activate reception of
the fax.
Handset or telephone connected to the
machine.
AnsMode
Fax/Tel
Receives faxes automatically and
routes voice calls to the answering
machine.
Answering machine connected to the
machine.
DRPD
Fax/Tel
Subscription to a DRPD service.
Rings differently depending on whether
Handset or the extension telephone
a call is a fax or voice call.
connected to your machine.
*
Factory default setting
You can confirm which receive mode is set by checking the standby display. The receive mode is displayed in the lower left
of the LCD.
Different Ways to Receive a Fax
7-1
Setting the Receive Mode
Set the machine receive mode as follows:
1
Open One-Touch Speed Dial panel ➞ press [Receive Mode].
The LCD display shows the current receive mode setting.
2
If you want to change the receive mode, press [Receive Mode] repeatedly until the mode you want appears ➞ press [Set].
Each time you press [Receive Mode], the receive mode changes in the following order:
FaxOnly ➞ DRPD ➞ Manual ➞ AnsMode ➞ FaxTel ➞ FaxOnly ➞ …
Receiving Faxes and Phone Calls Automatically:
FaxTel Mode
Set this mode if you want your machine to automatically switch between voice and fax calls.
You can control precisely how your machine handles incoming calls by adjusting the settings below.
7
Receiving Faxes
Setting the Options for FaxTel Mode
■ RING START TIME
When a call comes in, the machine checks to see if it is a person wishing to speak to you or a fax machine trying to send a document. If
your machine does not have enough time to detect the fax tone, it assumes the call is from a telephone. Use the
setting to increase the time the machine takes to check whether a call is from a fax machine or a telephone. You can select a time between
0 and 30 seconds; the default is 6 seconds.
■ F/T RING TIME
When your machine is set to receive both fax and telephone calls automatically, the telephone rings to alert you to pick up the handset if the
call is from a person. If you do not pick up the handset within a certain amount of time, the telephone stops ringing. Use this option to
change the number of times the machine rings, from 15 to 300 seconds. The default is 15 seconds.
■ F/T SWITCH ACTION
Not all fax machines are capable of sending a fax tone (the CNG tone that warns the receiving fax machine that a fax is coming). For those
cases the machine may think that the call coming in is a voice call and rings to alert you of the call (the amount of time it is going to ring is
determined by the setting above). If you do not answer the call, one of two things can happen:
1. If you set the to ‘RECEIVE’, the machine will switch to fax receive mode automatically at that point and start to
receive the document. If no document comes in, it disconnects the call after approx. 40 seconds. The factory default setting is
‘RECEIVE’.
2. If you set the to ‘DISCONNECT’, the machine will disconnect the phone call immediately freeing up your phone
line at this point.
7-2
Different Ways to Receive a Fax
What Happens When FaxTel Mode is Selected
Type of call
Telephone
Telephone charges
begin for caller.
Fax
Fax
Sending document
manually
Sending document
automatically
The machine answers without ringing
The machine listens for fax tone
(For 6 sec.)
Fax tone
detected
RING START TIME
(Factory default
setting = 6 sec.)
F/T RING TIME
(Factory default
setting = 15 sec.)
Document received
automatically
Fax tone is not detected
(Fax tone is detected
and the FAXPHONE
L170 switches to
receive mode.)
The telephone starts ringing
Pick up the
handset to talk
If you donít pick up the handset
(within 15 sec.)
DISCONNECT
The machine
disconnects the call.
7
Receiving Faxes
F/T SWITCH ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a fax
tone. For those cases if you set the to RECEIVE, the machine switches to
receive mode automatically and starts receiving
the document. If no document comes in, it
disconnects after approx. 40 seconds.
Set the FaxTel Mode options as follows:
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <4.RX SETTINGS> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select <2.FAX/TEL OPT. SET> ➞ press [Set] twice.
5
Press [
(-)] or [
(+)] to set the time the machine waits before ringing when it receives a call ➞ press [Set] twice.
RING START TIME
06SEC ➞
F/T RING TIME
You can use the numeric buttons instead of using [
015SEC
(-)] or [
(+)] to set the time.
Different Ways to Receive a Fax
7-3
6
Press [
(-)] or [
(+)] to set the time the machine rings while waiting for someone to pick up the handset ➞ press [Set] twice.
F/T RING TIME
015SEC ➞
F/T SWITCH ACTION
RECEIVE
You can use the numeric buttons instead of using [
7
Press [
(-)] or [
(-)] or [
(+)] to set the time.
(+)] to select or ➞ press [Set].
F/T SWITCH ACTION
RX SETTINGS
DISCONNECT ➞ 3.DRPD:SELECT FAX
This setting tells the machine what to do if no one picks up the handset within the specified ring time set in step 6.
8
Press [Stop/Reset] to return to standby mode.
Receiving Faxes Manually: Manual Mode
To use this mode, you must have the handset or a telephone connected to the machine. In Manual Mode, the machine rings
every time it receives a call, whether the call is from a telephone or a fax machine.
NOTE
Make sure the setting in the menu is enabled. See p. 15-11 for details.
7
Receiving Faxes
If you use your machine with Manual Mode, answer incoming calls as follows:
1
When the handset or the telephone rings, pick up the receiver.
● If you hear a person’s voice:
❑ Start your conversation. If the caller wants to send a document after talking to you, ask them to press the start button on their fax
machine. When you hear a beep, press [Start] to begin receiving the document, then hang up.
● If you hear a slow beep or silence:
❑ A fax machine is trying to send you a document.
Press [Start] on the machine, then hang up.
-orEnter the two-digit ID code from the telephone, then hang up.
7-4
Different Ways to Receive a Fax
• The machine then begins receiving the document. (This is particularly convenient if your telephone is located away from the machine.)
• If you do not hang up after pressing [Start] or the two-digit ID code, the machine beeps intermittently after you receive the document.
(You can turn the beeping off by disabling the in the menu. See p. 15-7 for details.)
NOTE
If you have an answering machine connected to your machine that can carry out remote-control operations (controlling your answering
machine from a remote telephone), the security code for this function may be the same as the two-digit ID code described above. If so,
make sure you change the machine two-digit ID code to make it distinct from the answering machine’s security code. See p. 15-11 for
details on changing the code ( setting).
Receiving Faxes Automatically: FaxOnly Mode
When the machine is set up for a dedicated line, set FaxOnly Mode to automatically receive documents whenever a call
comes over the fax line.
• The machine assumes all incoming calls are from fax machines sending documents. It receives the documents
automatically and disconnects all voice calls.
• In FaxOnly Mode, you can control whether or not the machine rings when it receives a fax call. To set this option from the
machine operation panel, see p. 15-10 ( setting).
Using an Answering Machine: AnsMode
Using the Machine With an Answering Machine
Follow these guidelines when using the machine with an answering machine:
• Set the answering machine to answer on the first or second ring.
• If the machine runs out of paper or toner in AnsMode, it receives all faxes into memory. The faxes then print automatically
when you add paper or replace the toner cartridge.
• When recording the outgoing message on the answering machine:
- The entire message must be no more than 15 seconds long.
- In the message, tell your callers how to send a fax. For example:
“Hello. I can’t answer the phone right now. If you would like to send a fax, press the start button on your fax machine. Thank
you.”
Receiving with a DRPD (Distinctive Ring Pattern Detection)
service: DRPD
DRPD service assigns two or more telephone numbers with distinctive ring patterns to a single telephone line, allowing you
to have both a fax number(s) and a telephone number(s) using only one telephone line. Your fax will automatically monitor
incoming calls and based on the ring pattern, will let you know if the call is a fax or voice call. Set the fax ring pattern that
matches the pattern assigned by your telephone company.
NOTE
Contact your local telephone company for detailed information on this service.
Different Ways to Receive a Fax
7-5
7
Receiving Faxes
Connecting an answering machine to the machine allows you to receive faxes and phone messages while you are out of
the office.
Receiving Faxes in Memory When a Problem Occurs
The machine will automatically receive incoming faxes into its memory if it encounters a problem that prevents it from
printing normally. The LCD will display and a message showing the problem. See below the
error messages, their cause and the action you need to take to correct the problem.
NOTE
• The machine memory can store up to approx. 450 LTR-size pages*.
• Once the pages are printed, they are deleted from memory.
• If the memory becomes full, you will not be able to receive the remaining pages. Contact the other party and ask them to resend the
remaining pages of the fax.
If the machine receives a document into its memory, the LCD displays one of the following messages. These messages
show the action you must take to correct the problem.
REPLACE CARTRIDGE
7
Receiving Faxes
Cause: The toner cartridge ran out of toner or is not installed properly.
Action: Make sure the cartridge is installed properly, and install a new one if necessary. See “Installing/Replacing the
Toner Cartridge,” on p. 2-16.
SUPPLY REC. PAPER
Cause: The machine ran out of paper.
Action: Add paper to the paper cassette/multi-purpose feeder. See “Loading Paper,” on p. 4-3.
REC. PAPER JAM
OPEN PRINTER COVER
Cause: A paper jam occurred.
Action: Clear the jam. See “Clearing Jams,” on p. 13-1.
Cause: Over capacity on the output tray.
Action: Take out sheets from output tray and clear the paper jam. See “Clearing Jams,” on p. 13-1.
Once you have corrected the problem, the machine automatically prints the documents stored in memory.
*
7-6
Based on Canon FAX Standard Chart No.1, standard mode
Receiving Faxes in Memory When a Problem Occurs
Receiving While Performing Other Tasks
Since the machine is a multitasking device, it can receive faxes and phone calls while you are entering your user
information, making copies, or printing.
If you receive a fax while you are making copies or printing, the machine stores the incoming fax in memory. Then, as soon
as you finish making copies or printing, the machine automatically prints the fax. If you are entering registration information,
the fax is printed as soon as it is received, and does not go into memory.
Canceling an Incoming Fax
To cancel an incoming fax, follow this procedure:
1
Press [Stop/Reset].
CANCEL DURING TX/RX?
< YES
NO >
Press [
(-)] to [Stop/Reset] receiving, or [
(+)] to resume receiving the fax.
7
Receiving Faxes
2
Receiving Faxes in Memory When a Problem Occurs
7-7
Receiving Faxes
7
7-8
Receiving Faxes in Memory When a Problem Occurs
Setting Up and Using Polling
8
CHAPTER
This chapter shows you how to set up and use polling sending and receiving. Polling is useful when the sending party cannot be in the office
at the same time.
What’s Polling?
Polling means a fax calls another fax and requests the other fax to send a document that it is holding. Unlike normal sending
and receiving, in polling the receiver always calls the sender. This is called polling to receive a document. The sender sends
the document in response to the polling by a telephone call from the receiver.
NOTE
Your fax can be set up to function in both roles. Your fax can poll to receive a document, or it can be polled to send a document that it is
holding.
Before You Use Polling Receiving
Before you try to set up polling, note the following points:
• With one operation you can poll several faxes. You can dial up to 142 telephone numbers and poll those faxes to receive
documents that they are holding.
• If the other party is using a Canon fax machine which has the Polling ID function, ask them to set the Polling ID of their fax
machine to 255 (1111 1111 binary number). For details on the Polling ID, see the other party’s fax machine manual. In all
other cases the Polling ID is not a concern.
What’s Polling?
8-1
Polling Other Fax Machines to Receive Documents
The machine polling feature allows you to request a document to be faxed to you from another fax machine. The sender
only needs to make sure the document is on his fax machine and ready to be sent: when your machine polls that machine,
the document is sent automatically. The machine can poll any fax machine that supports polling.
Requesting Another Fax to Send a Document
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Open One-Touch Speed Dial panel ➞ press [Polling].
3
Use [
8
(-)] or [
(+)] to select <2.POLLING RX> ➞ press [Set].
Setting Up and Using Polling
POLLING
2.POLLING RX
4
➞
TEL=
Enter the destination(s) using any of the following 4 methods.
● One-Touch Speed Dialing:
❑ Press the desired One-Touch Speed Dial button(s).
● Coded Speed Dialing:
❑ Press [Coded Dial] ➞ enter the two-digit code (00-99) using the numeric buttons.
Be sure to press [Coded Dial] before each code.
● Directory Dialing:
❑ Press [Directory] ➞ enter the first letter of the name of the party you are searching for.
● Regular Dialing:
❑ Enter the number using the numeric buttons or [Redial/Pause].
• You can enter 10 numbers.
• Be sure to press [Set] after your entry with the numeric buttons.
NOTE
If you make a mistake, open One-Touch Speed Dial panel ➞ [Delete] to delete the last number, or press [Clear] to delete all numbers you
entered when you use the numeric buttons.
5
8-2
Press [Set].
Polling Other Fax Machines to Receive Documents
Setting Up Polling Sending
This section shows you how to set up your fax to store and hold a document until it is polled by another fax to send it.
Setting Up a Polling Box
Before you can use polling sending, you must create a polling box with the of the Menu. The polling box
holds the document in the memory until the other party prompts (polls) your fax to send the document, or until you delete
the document (see p. 8-6).
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <6.POLLING BOX> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select <1.SETUP FILE> ➞ press [Set].
5
Press [
(-)] or [
(+)] to select <1.FILE NAME> ➞ press [Set].
6
Enter a file name for the polling box (up to 24 characters including spaces) using the numeric buttons ➞ press [Set].
➞
Setting Up and Using Polling
:A
CANON TOKYO
8
SETUP FILE
2.PASSWORD
• For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• The message appears on the LCD display for a few seconds.
7
Press [
(-)] or [
(+)] to select <2.PASSWORD> ➞ press [Set].
If you do not want to set a password, go to step 9.
8
Enter a password (up to 7 digits) using the numeric buttons ➞ press [Set].
PASSWORD
1234567 ➞
SETUP FILE
3.ERASE AFTER TX
NOTE
• This password protects your polling box settings from unauthorized access. To change these settings later, you will have to enter this
password.
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
9
Press [
(-)] or [
(+)] to select <3.ERASE AFTER TX> ➞ press [Set].
SETUP FILE
3.ERASE AFTER TX
➞
ERASE AFTER TX
ON
Setting Up Polling Sending
8-3
10
Press [ (-)] or [ (+)] to select or ➞ press [Set].
- :The document in the polling box is erased after it is sent in response to a polling request from another fax machine.
- :The document in the polling box is not erased after it is sent. Select this setting if you expect that the document will be polled
by more than one fax machine.
ERASE AFTER TX
11
OFF ➞
POLLING BOX
2.CHANGE DATA
Press [Stop/Reset] to return to standby mode.
Scanning a Document into the Memory for Polling Sending
Follow this procedure to store a document in the polling box. The document remains in the polling box so that other fax
machines can poll it. To use polling sending, you have to previously create a polling box.
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on
p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
8
Setting Up and Using Polling
3
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
4
Open One-Touch Speed Dial panel ➞ press [Polling].
5
Press [Set].
The document is scanned into the polling box.
8-4
Setting Up Polling Sending
Changing the Polling Box Settings
Follow this procedure to change the settings of a polling box.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <6.POLLING BOX> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select <2.CHANGE DATA> ➞ press [Set].
5
Enter the password (up to 7 digits) using the numeric buttons ➞ press [Set].
If you have not previously set a password, skip this step, and go to step 6.
CHANGE DATA
PASSWORD
******* ➞
CHANGE DATA
1.FILE NAME
For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
Press [
(-)] or [
(+)] to display the setting you want to change ➞ press [Set].
To change the settings for an item, follow the same procedure you used for the initial setup of the polling box. (See “Setting Up a Polling
Box,” on p. 8-3.)
NOTE
To change the password, you have to first enter the old password (it is not displayed as you enter it) ➞ press
[Set] ➞ enter a new password (it is displayed as you enter it) ➞ press [Set].
7
When you are finished making changes, press [Stop/Reset] to return to standby mode.
Setting Up Polling Sending
8-5
8
Setting Up and Using Polling
6
Deleting a Polling Box
Follow this procedure to cancel a polling box.
NOTE
You cannot cancel a polling box when the polling box is holding a document for polling sending.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <6.POLLING BOX> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select <3.DELETE FILE> ➞ press [Set].
5
Enter the password (up to 7 digits) using the numeric buttons ➞ press [Set].
If you have not previously set a password, skip this step, and go to step 6.
DELETE FILE
PASSWORD
8
DELETE FILE
******* ➞ FILE DELETED
For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
Setting Up and Using Polling
The polling box is deleted.
NOTE
If there is any document stored in the polling box, you cannot delete the polling box and the message appears on the
LCD display. If you want to delete the polling box, delete the document stored in the polling box first, then perform the procedure described
above. For details on how to delete documents stored in memory, see “Deleting a Fax Job,” on p. 11-2.
6
8-6
Press [Stop/Reset] to return to standby mode.
Setting Up Polling Sending
Special Features
9
CHAPTER
This chapter describes the special features of the machine.
Special Dialing
This section explains special dialing features, such as dialing international numbers.
Dialing Long Distance
When you register a long distance number, you may have to insert a pause either within or after the number. For long
distance dialing, the location and length of the pause may differ depending on the telephone system.
How to Enter Pauses
Use this procedure to enter pauses within or at the end of numbers.
1
2
During dialing registration, when you come to a step that asks you to enter a number for dialing, use the numeric buttons to
enter the number.
To enter a pause within a number, press [Redial/Pause].
• To enter a pause at the end of a number, press [Redial/Pause] ➞ press [Set].
• A pause entered within a number (p) is 2 seconds long.
• If necessary, you can adjust the length of a pause within a number. See p. 15-8 ( setting) for more details.
• To make a longer pause within a number, press [Redial/Pause] again. Each pause adds 2 seconds to the length of the pause.
• A pause at the end of a number (P) is fixed to 10 seconds.
Special Dialing
9-1
Using Tone Dialing On a Pulse Line
Even if you have a pulse line, the machine enables you to use tone dialing once you have connected to the number you are
calling. This allows you to take advantage of many services that require tones, such as selecting options from telephone
“touch-line” services.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Lift the handset.
-orPress [Hook].
The In Use/Memory indicator blinks green and you will hear the dial tone.
3
Dial the telephone number using the numeric buttons.
The machine connects using the pulses required by your phone line.
4
9
5
Press [Tone] to switch to tone dialing.
• When [Tone] is pressed, is displayed in the LCD.
• Numbers entered after pressing [Tone] will be dialed using tone dialing.
When you have finished, hang up the handset.
Special Features
-orPress [Hook].
9-2
Special Dialing
Using Memory Lock
Normally, a document prints as soon as you receive it. However, there may be occasions when you want the machine to
store all documents in memory until you are ready to print them. Locking the machine to receive and store all documents in
memory is called “Memory Lock.”
You may want to turn Memory Lock ‘ON’ when the machine is left unattended at night, or over long holidays, to prevent a
large volume of printed documents from collecting in the paper output trays. After you return to the office, you can review
the contents of the memory, and enter the memory lock password to print all of the documents stored in memory.
Turning Memory Lock ON and Setting the Password
After Memory Lock is turned ‘ON’, the machine automatically enters the Memory Lock mode. The documents received
when the machine is in the Memory Lock mode are stored in memory until you unlock the memory with a password and
print them.
Follow this procedure to turn the Memory Lock ‘ON’, and define the password.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <7.SYSTEM SETTINGS> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select <1.MEMORY LOCK RX> ➞ press [Set].
5
Press [
(-)] or [
(+)] to select ➞ press [Set].
Press [
(-)] or [
(+)] to display the desired Memory Lock setting ➞ press [Set].
6
Special Features
9
The MEMORY LOCK RX menu includes the following items:
Setting
1.MEM LOCK PASSWORD
Description
0 to 9999999
This password protects the Memory Lock
settings.
Setting a password is recommended. You
must use this password to unlock the
memory so you can print documents stored
in memory.
Use the numeric keys to enter a password
(up to seven digits) ➞ press [Set].
Using Memory Lock
9-3
Setting
2.REPORT
Description
Sets the machine to print reports. This
setting affects only reports that print
automatically, such as activity Management
Reports.
OUTPUT NO
No report prints while in the Memory Lock
mode.
OUTPUT YES
A report prints while the machine is in the
Memory Lock mode.
(The factory default setting is in bold face.)
7
Press [Stop/Reset] to return to standby mode.
Turning Memory Lock OFF and Printing Documents
Follow this procedure to turn the Memory Lock ‘OFF’ and print the documents received in memory.
9
1
When the Memory Lock mode is ‘ON’, the message is displayed instead of the Standby display.
2
Follow the steps 1 to 5 of “Turning Memory Lock ON and Setting the Password“ on p. 9-3 to turn the Memory Lock ‘OFF’.
Special Features
If you have not set the memory lock password (see step 6 in “Turning Memory Lock ON and Setting the Password” on p. 9-3), the LCD
displays <2. FAX DEFAULT>. The setting is completed and the documents received in memory are printed.
3
If a memory lock password has been set, enter the memory lock password using the numeric keys ➞ press [Set].
When you press [Set], all the documents received in memory while the machine was in the Memory Lock mode are printed. The memory
lock mode is deactivated.
9-4
Using Memory Lock
Making Copies
10
CHAPTER
This chapter describes how to make copies with your machine.
Making Copies
One of the machine’s convenient features is its ability to make up to 99 high-quality copies of a document. To make copies,
do the following:
1
Load the document in the ADF.
For details on how to place or load documents, see “Loading Documents in the ADF,” on p. 6-3.
2
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
3
Use the numeric buttons to enter the number of copies.
You can set up to 99 copies.
4
5
Adjust any necessary settings for your document.
• Press [Image Quality] to select the scanning resolution. (See, “Adjusting the Image Quality (Resolution),” on p. 10-6.)
• Press [Exposure] to select the scanning exposure. (See, “Adjusting the Exposure (Density),” on p. 10-6.)
• Press [Enlarge/Reduce] to select the copy ratio. (See, “Setting Enlarging/Reducing,” on p. 10-4.)
Press [Start].
NOTE
To cancel copying, press [Stop/Reset].
Making Copies
10-1
Specifying the Paper Size and Type
(Common for Cassette and Multi-Purpose Feeder)
NOTE
• When making copies on LTR-size paper after having continuously copied on paper smaller than LTR-size paper, the copies may be dirty.
To prevent copies from being dirty, wait about 1 minute before making copies.
• The paper in the multi-purpose feeder is fed prior to the paper in the cassette.
• The settings changed in the Menu do not return automatically to the settings you set previously. Change to the previous settings again if
necessary.
• When making copies of a small size or heavy paper*, etc., the copy speed may be slightly slower than usual.
* The paper type should be selected in the Menu.
• If you intend to make a copy and print with a thermal transfer printer using the same sheet of paper, make the copy first. Failure to do so
may make copies dirty or cause a paper jam.
• When copying onto transparencies, remove each transparency from the output tray as it is output.
Specifying the Paper Size
At the factory, the paper size has already been set to . Normally, you can make copies in this setting. When making
copies on other sizes of paper, you need to specify the paper size according to the following.
Making Copies
10
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <1. PAPER SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <1. CASSETTE> or <2. MP TRAY> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select <1. PAPER SIZE> ➞ press [Set].
5
Press [ (-)] or [ (+)] to select the appropriate paper size (A4, B5, A5, LTR, LGL EXECUTIV, ENVELOPE for the paper cassette,
A4, B5, A5, LTR, LGL, EXECUTIV, ENVELOPE or FREESIZE for the muiti-purpose feeder) ➞ press [Set].
● When is selected:
❑ Press [ (-)] or [ (+)] to select the appropriate envelope type (DL, ISO-C5, COM10, or MONARCH) ➞ press [Set].
● When is selected:
❑ Press [ (-)] or [ (+)] to select or ➞ press [Set].
❑ Use the numeric buttons, or press [ (-)] or [ (+)] to specify vertical and horizontal sizes of the paper in millimeters (mm).
Available setting range in : 127 mm to 356 mm (5” to 14”)
Available setting range in : 76 mm to 216 mm (3” to 8 1/2”)
❑ Press [Set].
Repeat the steps above to specify both vertical and horizontal sizes of the paper.
6
10-2
Press [Stop/Reset] to return to standby mode.
Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder)
Specifying the Paper Type
is selected as the default paper type. When making copies on paper other than plain paper, you can
specify the paper type according to the following. Specifying the paper type can prevent poor copy quality, or the printout
not being printed correctly.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <1. PAPER SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <1. CASSETTE> or <2. MP TRAY> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select <2. PAPER TYPE> ➞ press [Set].
6
Press [ (-)] or [ (+)] to select the appropriate paper type (PLAIN PAPER, PLAIN PAPER L, HEAVY PAPER, HEAVY PAPER H, or
TRANSPARENCY) ➞ press [Set].
Press [Stop/Reset] to return to standby mode.
10
Making Copies
5
Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder)
10-3
Setting Enlarging/Reducing
You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios.
Enlarging/Reducing Using Preset Copy Ratios
1
Press [Copy].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Enlarge/Reduce].
PRESET RATIO
100%
3
Press [
(-)] or [
(+)] to select the copy ratio ➞ press [Set].
PRESET RATIO
7 8 % L G L →L T R
10
+
+
➞
78%
LTR
TEXT
01
Making Copies
You can select from the following:
- 200% MAX.
- 129%
- 100%
- 78% LGL ➞ LTR
- 64%
- 50% MIN.
NOTE
• If the setting of menu in the Menu is set to ‘INCH’ or ‘AB’, the preset copy ratios will be as
•
10-4
follows:
INCH: 50%, 64%, 78%, 100%, 129% and 200%.
A: 50%, 70%, 100%, 141% and 200%.
AB: 50%, 70%, 81%, 86%, 100%, 115%, 141% and 200%.
“INCH” is set as the factory default.
To reset the copy ratio, press [Enlarge/Reduce] several times to display ratio ➞ press [Set].
Setting Enlarging/Reducing
Enlarging/Reducing Using Custom Copy Ratios
1
Press [Copy].
If you are already in the Copy standby mode, you can skip this step.
Press [Enlarge/Reduce] twice.
ZOOM 50-200%
100%
3
+
Use the numeric buttons to enter the copy ratio ➞ press [Set].
ZOOM 50-200%
80%
+
➞
80%
LTR
TEXT
01
• You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
• Even after entering the copy ratio, you can use [ (-)] or [ (+)] to adjust the copy ratio. To increase the copy ratio, press [
decrease the copy ratio, press [
(+)]. To
(-)].
NOTE
To reset the copy ratio, press [Enlarge/Reduce] several times to display ratio ➞ press [Set].
10
Making Copies
2
Setting Enlarging/Reducing
10-5
Improving Copied Image
Adjusting the Image Quality (Resolution)
You can adjust image quality to the appropriate level best suited for a document with text or photos.
3 modes are available for adjusting the image quality.
1
Press [Copy].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Image Quality] repeatedly until the image quality you want appears.
You can select from the following:
- for text-only documents
- for documents with text and photographs
- for photographs
NOTE
Copy exposure automatically changes to manual mode when or is set.
Making Copies
10
Adjusting the Exposure (Density)
You can adjust the copy exposure automatically or manually according to how light or dark your document is.
Adjusting Automatically
1
Press [Copy].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Exposure] to select the auto mode ➞ press [Set].
DENSITY
AUTO EXPOSURE
➞
100%
A
LTR
TEXT
01
The copy exposure is adjusted automatically.
NOTE
Image quality mode automatically changes to when is set.
10-6
Improving Copied Image
Adjusting Manually
1
Press [Copy].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Exposure] twice to select the manual mode.
3
Press [
(-)] or [
(+)] to adjust the copy exposure ➞ press [Set].
For a lighter copy exposure, press [
(-)].
For a darker copy exposure, press [
(+)].
DENSITY
-LT
DK+ ➞
100%
LTR
TEXT
01
NOTE
When setting the exposure lighter, the indicator moves to the left. When setting the exposure darker, the indicator moves to the right.
Making Copies
10
Improving Copied Image
10-7
Special Features
The machine can perform the Collate Copy and Reserve Copy.
Collate Copy
The collate copy allows you to sort copies in page order. It is convenient when you make multiple copies of multiple page
documents. To use this feature, you need to set to ‘ON’ in the menu. (See p. 15-5.)
Copy 1
1
2
1
3
4
Set 3
sets of copies
2
Copy 2
1
3
4
2
Copy 3
1
3
4
2
3
4
Follow the procedure below to set the Collate Copy function to ‘ON’:
Making Copies
10
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <3.COPY SETTINGS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <5.AUTO SORT> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select ➞ press [Set].
5
Press [Stop/Reset] to return to standby mode.
The Collate Copy function is set to ‘ON.’ To perform copying, follow the procedure described in “Making Copies,” on p. 10-1.
10-8
Special Features
Reserve Copy
This feature allows you to reserve the next job while the machine is printing out a current job.
1
Load the document faced down to be reserved in the ADF.
For details on how to load documents, see “Loading Documents in the ADF,” on p. 6-3.
2
Use the numeric buttons to enter the number of copies.
You can set up to 99 copies.
4
Adjust any necessary settings for your document.
• Press [Image Quality] to select the scanning resolution. (See, “Adjusting the Image Quality (Resolution),” on p. 10-6.)
• Press [Exposure] to select the scanning exposure. (See “Adjusting the Exposure (Density),” on p. 10-6.)
• Press [Enlarge/Reduce] to select the copy ratio. (See “Setting Enlarging/Reducing,” on p. 10-4.)
Press [Start].
The machine begins scanning.
NOTE
• After printing of the current copy job is complete, the next copy job begins.
• If the memory becomes full while scanning, appears in the LCD. When the ADF is used for scanning, the document
•
being scanned stops in the ADF. In this case, press [Set] to make the document come out automatically.
All of the scanned documents will be erased if appears, so divide the document and copy each part separately, or
select a lower image quality mode and make copies again.
If the available memory decreases, and are displayed alternatively. If memory space
becomes available, the scanning begins again automatically. Also, check that the cassette is not empty.
10
Making Copies
3
Special Features
10-9
Confirming the Copy Job You Reserved
1
Press [Stop/Reset] while the machine is printing out.
SELECT JOB TO CANCEL
0044
02 30
N O. O F C O P I E S
N O. O F D O C U M E N T S
R E S E RVAT I O N N O.
: PRINTING
B L A N K : WA I T I N G
: N O PA P E R , PA P E R J A M , E T C .
2
Press [
(-)] or [
(+)] to confirm the reservation number and number of documents.
NOTE
To finish confirming, press [Stop/Reset].
Deleting the Copy Job You Reserved
1
Press [Stop/Reset] while the machine is printing out.
2
Press [
(-)] or [
(+)] to display the job to be deleted ➞ press [Set].
SELECT JOB TO CANCEL
CANCEL COPYING?
0045
01 20 ➞ < YES
NO >
10
Making Copies
3
Press [
(-)] for .
The reserved copy job is deleted.
NOTE
• To cancel deleting the copy job, press [ (+)] for .
• Once the copy job is deleted, the job can not be restored.
10-10
Special Features
11
System Monitor
CHAPTER
Checking the Status of Copy, Fax, Print and Report
Jobs
Use [System Monitor] to confirm and delete the jobs.
When using [System Monitor], the LCD displays the jobs in the following order in each mode.
In Copy mode,
In Fax mode,
- COPY STATUS
- FAX MONITOR
- FAX MONITOR
- COPY STATUS
- PRINT STATUS
- PRINT STATUS
- REPORT STATUS
- REPORT STATUS
Confirming Transmission Status
Follow the procedure below to confirm the sending or receiving status.
1
Press [System Monitor] repeatedly until is displayed ➞ press [Set].
FAX MONITOR
1.RX/TX STATUS
➞
16:50 0056 TX
123xxxx
NOTE
• To return to standby mode, press [Stop/Reset].
• If you perform the procedure above when the machine is not sending or receiving faxes, appears, and the
display returns to the display shown in step 1.
• The transaction number and in the LCD mean the following:
- <0001> to <4999>: A sent document (TX)
- <5001> to <9999>: A received document (RX)
Checking the Status of Copy, Fax, Print and Report Jobs
11-1
Confirming Transmission Results and Sending Reservation
Follow the procedure below to confirm the sending or receiving results and sending reservation (automatic redialing and
delayed sending).
1
Press [System Monitor] repeatedly until is displayed.
2
Press [
(-)] or [
(+)] to select <2.TX/RX RESULT> ➞ press [Set].
The sending result and reservation can be confirmed by checking the sending time, or fax number.
3
Press [
(-)] or [
(+)] to confirm the sending result and reservation.
15:34 0010 TX STNDBY
[
01]CANON USA
NOTE
• To return to standby mode, press [Stop/Reset].
• If you perform the procedure above when there is no sending reservation and transmission jobs, will appear, and
the display will return to the display shown in step 2.
Deleting a Fax Job
11
1
Press [System Monitor] repeatedly until is displayed.
System Monitor
Follow the procedure below to delete the documents waiting to be sent by automatic redialing or delayed sending.
2
Press [
3
Use the numeric buttons to enter the transmission number of the fax job you want to delete ➞ press [Set].
(-)] or [
TX RX NO.
(+)] to select <3.DELETE DOCUMENT> ➞ press [Set].
0055 ➞
OK TO DELETE?
< YES
NO >
NOTE
You can check the transmission number of the reserved fax job by printing the DOCUMENT MEMORY LIST. (See p. 12-10.)
4
If you want to delete the fax job, press [
(-)] for .
If you change your mind and do not want to delete the fax job, press [
11-2
Checking the Status of Copy, Fax, Print and Report Jobs
(+)] for .
Confirming and Deleting a Copy Job
1
Press [System Monitor] repeatedly until is displayed.
NOTE
If there is no job, is displayed.
2
Press [
(-)] or [
(+)] to confirm the job number, and the quantity of copies.
COPY STATUS
0003
3
03 02
If you want to delete the copy job, press [Set].
CANCEL COPYING?
< YES
NO >
4
If you decide to delete the job, press [
(-)] for .
NOTE
To cancel deleting the job, press [ (+)] for .
Once the job is deleted, the job cannot be restored.
Confirming and Deleting a Print Job
1
11
Press [System Monitor] three times.
System Monitor
NOTE
If there is no job, is displayed.
2
Press [
(-)] or [
(+)] to confirm the file name.
PRINT STATUS
------------FILE NAME
3
If you want to delete the print job, press [Set].
CANCEL PRINTING?
< YES
NO >
4
If you decide to delete the print job, press [
(-)] for .
NOTE
• To cancel deleting the job, press [ (+)] for . Once the job is deleted, the job cannot be restored.
• The LCD can display characters in ASCII cord. Using characters other than those in ASCII cord may have the LCD display garbled
characters.
Checking the Status of Copy, Fax, Print and Report Jobs
11-3
Confirming and Deleting a Report Job
1
Press [System Monitor] four times.
NOTE
If there is no job, is displayed.
2
If there is one report job and if you want to delete it, press [Set].
CANCEL REPORT?
< YES
NO >
3
If you decide to delete the job, press [
4
If there are multiple report jobs, press [
(-)] for .
(-)] or [
(+)] to select the job you want to delete.
REPORT STATUS
02 USER DATA LIST
5
Press [Set].
CANCEL REPORT?
< YES
NO >
6
11
If you decide to delete the job, press [
(-)] for .
NOTE
(+)] for . Once the job is deleted, the job cannot be restored.
System Monitor
To cancel deleting the job, press [
11-4
Checking the Status of Copy, Fax, Print and Report Jobs
12
Reports and Lists
CHAPTER
This chapter describes how to print reports and lists.
Activity Report
The Activity Report is printed out automatically by the machine after every 20 transactions. This report lists the details of the
documents you have sent or received so that you can keep track of the transaction operations your machine has performed.
• Machine prints sending and receiving transactions together in the same report.
• When sending a document to many locations (Broadcast), the transaction number will be the same for each transmission
in the group.
You can also print the Activity Report manually if you want to check the report before the 20 transactions are completed.
Follow this procedure to print the Activity Report.
1
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
Open One-Touch Speed Dial panel ➞ press [Report].
REPORT
1.ACTIVITY REPORT
3
Press [Set].
The machine prints the ACTIVITY REPORT and the LCD returns to standby mode.
12/31 2004
09:58 FAX 8 3 3 4 4 2 3
W O R L D E S TAT E , I N C .
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
ACTIVITY REPORT
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
ST. TIME
❉12/31
DESTINATION TEL/ID
NO .
MODE
❉12/31
08:28 ADAM BOOK.CPA
08:49 BELZER.INC.
732 2233
1 213 978 3314
0007 TRANSMIT
5005 AUTO RX
❉12/31
09:08 R.LOUIS
1 213 978 3314
0008 TRANSMIT
732 2233
3333
0009 TRANSMIT
12/31 09:34 ADAM BOOK.CPA
IF MARKED WITH AN ❉
IT ALREADY HAS BEEN PRINTED OUT.
PGS .
ECM
ECM
RESULT
1 OK 00’06
1 NG 00’20
1 STOP
2 NG 00’00
0 #995
1 OK 00’18
ERROR CODE
TRANSACTION NUMBER
Activity Report
12-1
Transmission (TX) Reports
The machine normally prints a report only when an error occurs during sending (ERROR TX REPORT). However, you can
set the machine to print a report every time you send a document (TX REPORT).
If you send a document using memory, you can also select whether the first page of the document is printed with the report.
See “1.TX REPORT“ in the menu on p. 15-7 for details on setting these options.
Represents the time the last attempt was made to transmit a document.
TIME USE
Represents the amount of time it took during the last attempt to transmit. Please note that
the usage time does not reflect the total usage time used to transmit all pages of the
document when “retry” occurs. By printing an ACTIVITY REPORT and matching the
transaction number of the TX REPORT with a transaction number in the ACTIVITY
REPORT you can find out exactly how many attempts were made to send the document,
how many pages were sent in each attempt as well as the usage time for each attempt.
PAGES SENT
When OK appears under RESULT (see below), PAGES SENT represents the number of
pages that were successfully transmitted when an error did not occur in the first attempt or
in consequent retries.
When NG appears under RESULT (see below), PAGES SENT indicates the pages after
this page were not sent.
RESULT
OK means that all pages were transmitted either during the first attempt or after the first
or second retry.
NG means that either some or no pages were transmitted after 2 retries.
Error TX Report
Reports and Lists
12
ST. TIME
12/31 2004
10:32
FAX
8334423
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
ERROR TX REPORT
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
12-2
Transmission (TX) Reports
0006
1 213 978 3314
JOHN BARRISTER
12/31 10:30
00 00
0
NG
STOP
TX Report
12/31 2004
0 9 : 5 8 FAX 8 3 3 4 4 2 3
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
TX REPORT
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
TRANSMISSION OK
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
TIME USE
PAGES. SENT
RESULT
WHEN YOU
SET THE FAX
TO PRINT
THE FIRST
PAGE OF THE
DOCUMENT
0006
20 545 8545
JOHN BARRISTER
12/31 09:48
00 16
1
OK
THE SLEREXE COMPANY LIMITED
SAPORS LANE BOOLE DORSET BH25 8ER
TELEPHONE BOOLE (945 13) 51617
Our Ref. 350/PJC/EAC
FAX 123456
December 27, 2004
Dr. P. N. Cundall,
Mining Surveys Ltd.,
Holroyd Road,
Reading,
Berks.
Multi TX/RX Report
If you used sequential broadcasting to send a document, the MULTI TX/RX REPORT is printed.
12/31 2004
09:58
FAX 8 3 3 4 4 2 3
WORLD ESTATE,INC.
001
12
❉❉❉
MULTI TX/RX REPORT
Reports and Lists
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
TX/RX NO
PGS.
TX/RX INCOMPLETE
0013
1
_____
TRANSACTION OK
[
[
ERROR INFORMATION
01]732 2233
03]1 914 438 3619
JOHN BARRISTER
SEYMOUR GREEN
_____
If you set your machine to print activity reports (TX REPORT or RX REPORT) and then use sequential broadcasting or
polling reception with multiple parties, multi-activity report will be printed instead of the activity report (Sending or
Receiving). See , on p. 15-7.
Transmission (TX) Reports
12-3
Reception (RX) Report
Normally the machine does not print a reception report (RX REPORT) unless you set it to do so.
You can set the machine to print the RX REPORT every time you receive a document or only if an error occurs during
receiving. See p. 15-8 for details on setting this option.
12/31 2004
0 9 : 5 8 FAX 8 3 3 4 4 2 3
WORLD ESTATE,INC.
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
RX REPORT
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
RECEPTION OK
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
TIME USE
PGS.
RESULT
Reports and Lists
12
12-4
Reception (RX) Report
5008
1 213 978 3314
JOHN BARRISTER
12/31 09:07
00 17
1
OK
001
Memory Clear Report
If you experience a power failure, all documents stored in memory can be saved for up to approx. 1 hour. If power is not
restored to the fax within 1 hour, the documents in memory will be lost. If this time limit has elapsed by the time power is
restored to the fax, as soon as power is restored a list of documents deleted from the memory as a result of the power
failure is printed automatically.
12/31 2004
10:32
FAX
8334423
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
❉❉❉
MEMORY CLEAR REPORT
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
MEMORY FILES DELETED
TX/RX NO
0001
0002
MODE
DELAYED TX
TRANSMIT
DESTINATION TEL/ID
[
[
01] ADAM BOOKS.CPA
02] JOHN BARRISTER
PGS.
1
3
SET TIME
12/30 10:07
12/30 10:26
ST. TIME
23:30
NOTE
If there are one or more documents in the image memory when the power is cut off, the machine will print the Memory Clear Report when
the power is restored unless the machine is running out of paper or toner.
Reports and Lists
12
Memory Clear Report
12-5
Speed Dialing Lists
Your machine can print speed dialing lists. These lists allow you to review the numbers and names registered under
One-Touch Speed Dial buttons and Coded Speed Dialing codes (including Group Dialing numbers).
Follow this procedure to print the lists.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <8.PRINT LISTS> ➞ press [Set].
3
Press [
(-)] or [
(+)] to select <2.SPEED DIAL LIST> ➞ press [Set].
4
Press [
(-)] or [
(+)] to select the list you want to print ➞ press [Set].
You can select from the following:
- <1-TOUCH LIST>
-
-
If you selected <1-TOUCH LIST> or , press [
order you want the destinations to be printed:
(-)] or [
(+)] to select or depending on what
Select <1.NO SORT> to print the list in key number order ➞ press [Set].
-orSelect <2.SORT> to print the list with the names of the destinations in alphabetical order ➞ press [Set].
12
Reports and Lists
The machine prints the list and the LCD returns to standby mode.
NOTE
You can also print the list using [Report]. Open One-Touch Speed Dial panel ➞ press [Report] ➞ select <2. SPEED DIAL LIST> ➞ a report
you want to print out ➞ press [Set].
12-6
Speed Dialing Lists
One-Touch Speed Dial List
12/31 2004 10:32
FAX
8334423
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
1-TOUCH LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
NOT SORTED
NO.
[
[
[
[
[
DESTINATION TEL #
01]
02]
03]
06]
08]
DESTINATION ID
1 914 438 3619
722 2655
1 516 911 4411
761 1298
732 2233
12/31 2004 10:32
FAX
SEYMOUR GREEN
ROBERT STUART
NATALIE SMITH
JOHN BARRISTER
ADAM BOOKS.CPA
8334423
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
1-TOUCH LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
SORTED
NO.
[
[
[
[
[
DESTINATION TEL #
08]
06]
03]
02]
01]
DESTINATION ID
732 2233
761 1298
1 516 911 4411
722 2655
1 914 438 3619
ADAM BOOKS.CPA
JOHN BARRISTER
NATALIE SMITH
ROBERT STUART
SEYMOUR GREEN
Coded Speed Dial List
12/31 2004 10:32
FAX
8334423
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
CODED DIAL LIST
❉❉❉
12
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
NO.
[❉
[❉
[❉
[❉
[❉
DESTINATION TEL #
01]
02]
03]
04]
08]
DESTINATION ID
555 1234
1 914 438 3619
1 516 911 4411
1 617222322
732 2233
12/31 2004 10:32
FAX
Reports and Lists
NOT SORTED
BILL
SEYMOUR GREEN
NATALIE SMITH
HUNT INVESTMENTS
ADAM BOOKS.CPA
8334423
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
CODED DIAL LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
SORTED
NO.
[❉
[❉
[❉
[❉
[❉
DESTINATION TEL #
08]
01]
04]
03]
02]
732 2233
555 1234
1 617222322
1 516 911 4411
1 914 438 3619
DESTINATION ID
ADAM BOOKS.CPA
BILL
HUNT INVESTMENTS
NATALIE SMITH
SEYMOUR GREEN
Speed Dialing Lists
12-7
Group Dial List
12/31 2004
13:36
FAX
833 4423
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
GROUP DIAL TEL # LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
[
05]
CANON GROUP
Reports and Lists
12
12-8
Speed Dialing Lists
[
[
[❉
[❉
01]
02]
01]
10]
876
613
225
233
2398
9076
7823
7766
CANON
CANON
CANON
CANON
TX
OH
NY
CA
User’s Data List
You can print a list of the data registered in your machine. This list is useful when you want to review the user data
information you may have entered (such as your name and number, the date and time) and all other settings currently
selected.
Follow this procedure to print the USER’S DATA LIST.
2
Press [Menu].
Press [
(-)] or [
(+)] to select <8. PRINT LISTS> ➞ press [Set] twice.
The machine prints the USER'S DATA LIST and the LCD returns to standby mode.
NOTE
• The LCD returns to standby mode and the USER’S DATA LIST is printed.
• You can also print the USER'S DATA LIST using [Report]. Open One-Touch Speed Dial panel ➞ press [Report] ➞ press [
(-)] or [
(+)] to
select <1.USER DATA> ➞ press [Set].
12/31 2004
13:36
FAX 8334423
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
USER’S DATA LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
1.PAPER SETTINGS
CASSETTE
PAPER SIZE
PAPER TYPE
MP TRAY
PAPER SIZE
12
LTR
PLAIN PAPER
Reports and Lists
1
LTR
SCANNING C
ENERGY SAVER
ENERGY SVR TIME
DATE SETUP
DAYLIGHT SAVING TIME
START DATE/TIME
MONTH
WEEK
DAY
TIME
END DATE/TIME
MONTH
WEEK
DAY
TIME
ON
5MIN.
MM/DD YYYY
ON
APRIL
FIRST WEEK
SUNDAY
02:00
SEPTEMBER
LAST WEEK
SATURDAY
02:00
TOTAL MEMORY
MAIN
MAIN2
ECONT
4.080MB
-------------
DE-03-02
WLD-02-01
0027
User’s Data List
12-9
Document Memory List
The machine can print a list of documents stored in memory, along with the transaction number (TX/RX NO.) of each
document.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Open One-Touch Speed Dial panel ➞ press [Report].
Press [
(-)] or [
(+)] to select <4.DOC.MEMORY LIST> ➞ press [Set].
The machine prints the DOCUMENT MEMORY LIST and the LCD returns to standby mode.
NOTE
Once you know the transaction number of a document stored in memory, you can delete it. (See “Deleting a Fax Job” on p. 11-2.)
12/31 2004
17:15
FAX
123 4567
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
DOCUMENT MEMORY LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
TX/RX NO
0046
0047
Reports and Lists
12
MODE
DELAYED TX
TRANSMIT
12-10
Document Memory List
DESTINATION TEL/ID
[
[
01] Canon TOKYO
02] Canon ITALIA
PGS.
1
3
SET TIME
12/31 10:07
12/31 10:26
ST. TIME
23:30
Troubleshooting
13
CHAPTER
This chapter describes the problems you might encounter when using the machine and their remedies. It also explains what to do if you
cannot solve the problem by yourself.
Clearing Jams
This section describes how to remove jammed paper.
Removing Jammed Paper from Inside the Machine
When print media jams inside the machine, the LCD displays and .
CAUTION
There are some areas inside the machine and cartridge which are subject to high voltages and high temperatures. Take
adequate precaution when performing internal inspections to avoid burns or electrical shock.
NOTE
When removing jammed paper from inside the machine, take care not to allow the toner on the jammed paper to come into contact with
your hands or clothing. If they become dirty, wash them immediately with cold water. Washing with warm water will set the toner, and make
it impossible to remove the toner stains.
Clearing Jams
13-1
1
Open the printer cover.
2
Remove the cartridge.
If you find jammed paper in this step, proceed to the next step without removing it.
IMPORTANT
• Remove watches and any bracelets or rings when touching the inside of the machine. These items might be damaged if they come into
contact with the parts inside the machine.
• When removing the jammed paper, do not touch the transfer roller (shaded part) as its surface is very delicate and susceptible to finger oil
and scratches, which may lead to print deterioration.
• To avoid possible damage to the printer, do not touch the pins near the left end of the transfer roller.
Troubleshooting
13
PINS
TRANSFER ROLLER
NOTE
Do not expose the cartridge to light for more than 5 minutes. If necessary, put the cartridge in its original protective bag or wrap it with a
thick cloth to prevent exposure to light.
3
Open the face up cover and push down the green paper release levers on both sides of the face up paper output.
If you find jammed paper in this step, proceed to the next step without removing it.
13-2
Clearing Jams
5
6
Hold both sides of the jammed paper and carefully move it inward, then gently pull it out.
Roll the leading end of the paper outwards so that the printed surface is on the inside of the roll, then gently pull the rolled up
paper out of the machine.
If the leading edge of the paper is visible but has not entered the imaging area, pull the paper forwards and roll it inwards.
13
Troubleshooting
4
IMPORTANT
• Do not pull the jammed paper forward from the cassette. It may cause a malfunction.
Clearing Jams
13-3
• Do not pull the jammed paper upward; the toner on the paper will stain the printer and cause a permanent reduction in print quality.
• If you cannot remove jammed paper easily, proceed to the next step. Do not try to remove it forcefully.
7
Gently pull the jammed paper between the output rollers until the leading edge emerges from the back side of the machine.
8
Carefully pull the jammed paper straight out through the rollers.
Troubleshooting
13
If the jammed paper is badly folded, similar to the folds of an accordion, ease the jammed paper loose and then pull it out of the machine
9
Close the printer cover.
10
Pull out the cassette.
When pulling out the cassette, be sure to pull it out slowly and completely.
13-4
Clearing Jams
11
Slowly pull jammed paper in the direction of the arrow.
● When feeding paper from the cassette
❑ While putting your hand on paper as shown in the figure, slowly pull jammed paper in the direction of the arrow.
IMPORTANT
• When removing jammed paper, be sure to put your hand on paper. If you remove jammed paper without putting your hand on it, paper may
be torn.
• Do not touch the paper feed roller. If you touch it, this may result in misfeeds.
● When feeding paper from the muiti-purpose feeder.
❑ Slowly pull out jammed paper in the direction of the arrow.
Push the paper release levers back to their original position and close the face up cover.
IMPORTANT
• Be sure to push the paper release levers back to their original position. If the levers are left pushed down, the paper jam error will not be
resolved.
• Never push down the paper release levers while printing. This could result in damage to the fixing assembly.
13
Open the printer cover.
Clearing Jams
13-5
Troubleshooting
13
.
12
14
Insert the cartridge back into the machine, then close the printer cover.
For details, see “Installing/Replacing the Toner Cartridge,” on p. 2-16.
If paper that you set into the manual feed slot is jammed, set paper into the manual feed slot and perform printing operation again in this
step.
IMPORTANT
• After you replace the cartridge and close the printer cover, the machine should be ready for operating. If the machine returns to the ready
•
•
15
state for operating, troubleshooting has been successful. If the machine does not return to the ready state for operating, confirm that the
paper release levers are pushed back to their original position, and check to see that jammed paper is not left in the machine.
If you cannot close the front cover, confirm that the toner cartridge is set properly. If you close the front cover forcefully, this may cause
damage to the machine.
Do not leave the front cover open for a long time after setting the toner cartridge.
Set the cassette in the machine.
Push the cassette into the machine firmly until the front surface of the cassette is flush with that of the machine.
Removing Jammed Paper from the ADF
When the document jams in the ADF, the LCD displays or .
1
Widen the slide guides until they stop, and remove the paper so as not to be caught by the slide guides. Open the ADF and
gently remove the jammed paper from the ADF.
Troubleshooting
13
NOTE
After removing jammed paper, even edges of the document before loading it in the ADF again.
13-6
Clearing Jams
LCD Messages
The following messages are displayed in the LCD when the machine performs a function or if it encounters an error.
3
CHECK DOCUMENT
Cause
The paper size setting is set to a size
other than letter, legal, A4, B5, or A5.
There is a paper jam in the ADF.
The ADF roller rotates without feeding
documents.
CHECK PRINTER
DOCUMENT TOO LONG
HANG UP PHONE
INCORRECT PAPER SIZE
INSTALL CARTRIDGE
LOAD LTR SIZE PAPER
MEM IN USE nn %
MEMORY FULL
NOT REGISTERED
PRINTER DATA ERROR
The document has stopped in the ADF
because you pressed [Stop/Reset] while
scanning.
An abnormality has occurred in the
printer.
Action
Set the paper size setting to letter, legal, A4, B5, or A5 and load
paper of the same size.
Remove the document in the ADF. (See p. 13-6.)
Make sure that the document is not too long or too short. (See p.
6-1.)
Then reset the machine by opening the printer cover and then
closing it.
Fan the edge that will feed into the machine first, then tap the
edge of multiple page documents on a flat surface to even the
stack.
Remove the document in the ADF.
(See p. 13-6.)
Reset the machine by opening the printer cover and then closing
it. If the message remains, unplug the machine from the power
supply and call your service representative.
The document is longer than 14” (356
Reduce the length of the document to within 14” (356 mm) or 39
mm) for multi-page document, 39 3/8” (1 3/8” (1 meter).
meter) for one-page document, or is not
feeding correctly.
There is a paper jam in the ADF.
Remove the document you are trying to copy in the ADF. (See p.
13-6.)
Make sure that the document is not too long or too short. (See p.
6-1.)
Then reset the machine by opening the printer cover and then
closing it.
The handset is not placed in the handset Replace the handset correctly.
cradle correctly.
The size of the paper in the cassette or
Load the correct paper size or change the setting
multi-purpose feeder is different from that of the Menu. (See p. 15-2.)
of the paper specified in the setting of the Menu.
closing it.
The cartridge is not installed or not
installed correctly.
No LTR-size paper is loaded in the
cassette or multi-purpose feeder.
Shows the percentage of memory
currently in use. This message is
displayed when you set the document in
ADF.
The memory is full because collate copy
was set when a large document is loaded.
The One-Touch Speed Dial button or
Coded Speed dialing code you entered
has not been registered.
Abnormality has occurred in the data
transmission between the machine and
computer.
Install the cartridge correctly. (See pages 2-16 to 2-18)
Load LTR-size paper in the cassette or multi-purpose feeder.
(See pages 4-3 to 4-10.)
Wait for the machine to send any faxes in memory. Also, print or
delete any documents in memory you no longer need.
Divide the document and copy each part separately.
If appears while scanning documents using
the ADF, the document being scanned stops in the ADF. In this
case, press [Set] to make the document come out automatically.
Register the One-Touch Speed Dial button or Coded Speed
Dialing code. (See pages 5-2 and 5-5.)
Use [System Monitor] to delete the current print job or the final
print job (If multiple jobs are being printed). Then you can shift to
the next job. If you use of the Menu, all the
print jobs are deleted. (See 15-14.)
LCD Messages
13-7
13
Troubleshooting
Message
CHANGE PAPERSIZE
Message
REC. PAPER JAM
Cause
There is a paper jam.
RECEIVED IN MEMORY
The machine received the fax in memory
because paper or toner ran out, a paper
jam occurred, or incorrect paper size was
loaded.
Paper is loaded in the multi-purpose
Remove the paper from the multi-purpose feeder. If the machine
feeder.
receives the fax then paper is loaded in the multi-purpose feeder,
the received document will be stored in memory.
REMOVE MP PAPER
REPLACE CARTRIDGE
The toner cartridge ran out of toner or is
not installed properly.
SCANNING
Memory is getting low during scanning
because the document has many
graphics or photos.
MAKING SPACE IN MEM
PLEASE WAIT
START AGAIN
SUPPLY REC. PAPER
The paper in the cassette has run out, the
toner has run out, paper jams have
occurred, or the paper size setting is
wrong while the report is printing.
No paper is loaded in the cassette or
multi-purpose feeder.
SYSTEM ERROR
Exxx*
An error of some kind has occurred
in the machine.
TX/RX NO. nnnn**
When the machine sends or receives a
fax, it assigns a unique identification
number (nnnn).
13
Action
Clear the paper jam (See pages 13-1 to 13-6.) and reload paper
in the cassette or multi-purpose feeder. Then reset the machine
by opening the printer cover and then closing it.
Load correct paper size in the cassette, replace the cartridge, or
clear the paper jam. (See p.7-6.)
Make sure the toner in the cartridge is evenly distributed or the
cartridge is installed properly.
After doing this, if the message remains displayed or the print
quality is low, replace the cartridge. (See pages 2-16 to 2-18)
When memory space becomes available as printing continues,
the scanning resumes automatically.
Then reset the machine by opening the printer cover and then
closing it.
After loading paper in the cassette, replacing the cartridge,
clearing jams, or specifying the correct paper size, print the report
again.
Load paper in the cassette or multi-purpose feeder. (See pages
4-3 to 4-10.) Make sure the paper stack in the cassette does not
exceed the capacity of the cassette.
Load paper in the multi-purpose feeder one by one. (See pages
4-8 to 4-10.)
If you load paper while making copies, do not load a different
paper size.
Unplug the machine from the power supply and wait for approx. 3
minutes to 5 minutes, then plug it in again. If this does not solve
the problem, unplug the machine and call your service
representative.
Write down the number for future reference.
Troubleshooting
* xxx stands for a number.
** The identification number does not appear in the standby mode. It appears when scanning documents, operating [System Monitor],
receiving faxes in Manual mode or memory, or after transmission is completed.
13-8
LCD Messages
Paper Feeding Problems
Paper does not feed correctly.
Q
Does the cassette or multi-purpose feeder contain an appropriate quantity of sheets?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder does not exceed the capacity of the
cassette or multi-purpose feeder. (See “Loading Paper,” on p. 4-3.)
Q
Is paper loaded correctly?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder is loaded properly, and that the slide
guides are adjusted correctly. (See “Loading Paper,” on p. 4-3.)
Q
Is the cassette inserted into the machine correctly?
A
Push the cassette into the machine as far as it will go, and make sure the cassette is not tilted or inserted at an angle.
Q
Are the paper size and type set correctly?
A
Specify the appropriate paper size and type in and in of the Menu.
(See “Loading Paper in the Cassette,” on p. 4-3.)
Paper feeds skewed. (Printing is skewed.)
Is paper loaded correctly?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder is loaded properly, and that the slide
guides are adjusted correctly. (See “Loading Paper,” on p. 4-3.)
A
Make sure the paper exit path is clear.
13
Troubleshooting
Q
Multiple sheets feed into the machine at the same time.
Q
Is paper loaded correctly?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder is loaded properly, and that the slide
guides are adjusted correctly. (See “Loading Paper,” on p. 4-3.)
Q
Have you fanned the paper stack before loading it in the cassette?
A
Be sure to fan the paper stack before loading it in the cassette. This keeps the sheets of paper from sticking together.
Paper Feeding Problems
13-9
Q
Does the cassette or multi-purpose feeder contain an appropriate quantity of sheets?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder does not exceed the capacity of the
cassette or multi-purpose feeder. (See “Loading Paper,” on p. 4-3.)
A
Do not force the paper stack into the cassette or the paper into the multi-purpose feeder.
A
Load paper one by one in the multi-purpose feeder.
Q
Is only one type of paper loaded in the cassette or multi-purpose feeder?
A
Load only one type of paper.
A
Make sure you load paper that meets the paper requirements for the machine. (See Chapter 4, “Paper Handling.”)
Transparencies do not feed correctly.
Q
Are the transparencies loaded correctly?
A
Make sure the transparencies in the cassette or the transparency in the multi-purpose feeder is loaded properly, and that the
slide guides are adjusted correctly. (See “Loading Paper,” on p. 4-3.)
Q
Is the proper transparency loaded in the multi-purpose feeder?
A
Do not use any transparencies designed for color copiers. They will cause a paper jam. Please use transparencies
recommended by Canon.
Q
Are the paper size and type set correctly?
A
Specify the appropriate paper size and type in and in of the Menu.
(See “Loading Paper in the Cassette,” on p. 4-3.)
13
Q
Is the proper paper loaded?
Troubleshooting
Paper feeds curled.
A
Check if the proper paper is loaded in the cassette or multi-purpose feeder. (See Chapter 4, “Paper Handling.”)
Paper stacked roughly.
13-10
Q
Is the proper paper loaded?
A
Check if the proper paper is loaded in the cassette or multi-purpose feeder. (See Chapter 4, "Paper Handling.")
A
Check if the appropriate paper type is selected in in of the Menu. (See “Loading
Paper,” on p. 4-3.)
Paper Feeding Problems
Repeated paper jams occur.
Q
Is the proper paper loaded?
A
Check that the size, thickness and type of the paper you are using. (See “Print Media Requirements,” on p. 4-1.)
Q
Is the proper paper loaded correctly?
A
Be sure to fan the paper stack before loading it in the cassette. This keeps the sheets of paper from sticking together.
Q
Is the output tray free of obstructions?
A
Do not place the delivered paper back on the output tray. (See “Face Down Paper Output Area,” on p. 4-13.)
A
Do not place objects other than paper on the output tray. (See “Face Down Paper Output Area,” on p. 4-13.)
Q
Is the machine installed in a proper location?
A
Check that the machine is installed in the proper location. (For information about specifications of the machine, see
Appendix A, “Specifications.” For safety warnings and cautions, see Location in the “Safety information” on p. v.)
Envelopes do not feed correctly.
Q
Are the envelopes loaded correctly?
A
Make sure the envelopes are loaded correctly. (See “Loading Envelopes in the Cassette,” on p. 4-5, or “Loading an Envelope
in the Multi-Purpose Feeder,” on p. 4-9.) Do not load more than 20 envelopes in the cassette. Load an envelope one by one
in the multi-purpose feeder.
Q
Is the proper envelope loaded?
A
Load the recommended envelopes (COM10, MONARCH, DL, or ISO-C5) in the cassette or multi-purpose feeder. (See
“Loading Envelopes in the Cassette,” on p. 4-5, or “Loading an Envelope in the Multi-Purpose Feeder,” on p. 4-9.)
Q
Are the paper size and type set correctly?
A
Specify the appropriate paper size and type in and in of the Menu.
(See “Loading Envelopes in the Cassette,” on p. 4-5.)
Paper Feeding Problems
13-11
Troubleshooting
13
Faxing Problems
Sending Problems
You cannot send a fax.
Troubleshooting
13
13-12
Q
Is the machine possibly overheated?
A
Unplug the machine and let it cool for approximate 3 minutes to 5 minutes. Then plug in the machine and try sending again.
Q
Did you connect the power cord to the machine just now?
A
Wait for a while. After connecting the power cord, the machine cannot scan documents immediately.
Q
Is the machine set for the correct telephone line type (pulse/tone)?
A
Make sure the machine is set for the correct telephone line type. (See “Setting the Telephone Line Type,” on p. 3-5.)
Q
Is the document loaded?
A
Remove the document, stack it if necessary, and load it in the ADF correctly.
Q
Is the One-Touch Speed Dial button or Coded Speed Dialing code you entered registered for the feature you want to use?
A
Check the One-Touch Speed Dial button or Coded Speed Dialing code and make sure it is registered correctly. (See
Chapter 5, “Speed Dialing.”)
Q
Did you dial a correct number? Or have you been provided with an incorrect number?
A
Dial the number again, or check that you have the correct number.
Q
Does the other party's fax machine have enough paper?
A
Call the other party and ask them to make sure paper is loaded in their fax machine.
Faxing Problems
Q
Did an error occur during sending?
A
Print an ACTIVITY REPORT and check for an error. (See “Activity Report,” on p. 12-1.)
Q
Is the telephone line working properly?
A
Make sure there is a dial tone when you pick up the handset of the telephone connected to the machine. If there is no dial
tone, contact your local telephone company.
Q
Is the receiving fax machine a G3 fax machine?
A
Make sure the receiving fax machine is compatible with the machine (which is a G3 fax machine).
Q
The other party's telephone may be busy or the other party's fax machine may be turned off. Is shown
on the ERROR TX REPORT?
A
The fax/telephone number you dialed is busy. Try sending the document later.
A
The other party's fax machine is not working. Contact the other party and have them check their fax machine.
Q
Did the receiving fax machine answer within 55 seconds (after all automatic redialing attempts)?
A
Contact the other party and have them check their fax machine. For an overseas call, add pauses to the registered number.
(See “Dialing Long Distance,” on p. 9-1.)
Q
Is the In Use/Memory indicator lighting?
A
The In Use/Memory indicator may light, which means the extension phone is busy. Please wait until the extension phone
becomes free.
Q
Is the document loaded?
A
Remove the document, stack it if necessary, and load it in the ADF correctly. (See “Loading Documents in the ADF,” on
p. 6-3.)
Q
Is the machine (sending fax machine) working properly?
A
Check the machine by making a copy. For more information, see Chapter 10, “Making Copies.”
If the copy is clear, the problem may be in the receiving fax machine. If the copy is spotted or dirty, clean the scanning area
in the machine. For more information, see Chapter 14, “Maintaining Your machine.”
Faxing Problems
13-13
Troubleshooting
13
Faxes sent from the machine are spotted or dirty.
Cannot send using ECM (Error Correction Mode).
Q
Does the receiving fax machine support ECM?
A
If the receiving fax machine does not support ECM, the document is sent in the normal mode without error checking.
Errors occur frequently while sending.
Q
Are the telephone lines in proper condition? Do you have a good connection?
A
Lower the transmission speed. (See “3.TX START SPEED,” on p. 15-6.)
Receiving Problems
Q
Is the machine set to receive automatically?
A
For the machine to receive faxes automatically, the receive mode must be set to mode or . (See
Chapter 7, “Receiving Faxes.”) If you have set , confirm that an answering machine is connected to the machine
and that it is turned on with an outgoing message properly recorded.
If you set <5. MAN/AUTO SWITCH> to in of the Menu, the machine will receive faxes
automatically even when the receive mode is set to mode. (See “5.MAN/AUTO SWITCH,” on p. 15-10.)
Q
Is the memory full?
A
Wait for the machine to finish any fax or print jobs stored in the memory or delete them from the memory. (See “Deleting a
Fax job,” p. 11-2.) Then ask the other party to resend the fax.
Q
Did an error occur during reception?
13
A
Print an ACTIVITY REPORT and check for an error. (See “Activity Report,” on p. 12-1.) You can also check the RX REPORT
when it is printed automatically. (See “Reception (RX) Report,” on p. 12-4.)
Troubleshooting
Cannot receive a fax automatically.
Q
Is the telephone line connected properly?
A
Make sure all line connections are secure. (See “Connecting the Telephone Line,” on p. 2-7.)
13-14
Faxing Problems
The machine does not switch automatically between telephone and fax receptions.
Q
Is the machine set to switch automatically between telephone and fax receptions?
A
For the machine to switch automatically, the receive mode must be set to . (See Chapter 7, “Receiving Faxes.”)
Confirm that an answering machine is connected to the machine and that it is turned on with an outgoing message properly
recorded.
Q
Is the sending fax machine able to send the CNG signal that tells the machine that the incoming signal is a fax?
A
Some fax machines cannot send the CNG signal that tells the machine the incoming call is a fax.
In such cases, you will have to receive the fax manually. (See “Receiving Faxes Manually: Manual Mode,” on p. 7-4.)
Cannot receive a document manually.
Q
Is the machine set to receive manually?
A
For the machine to receive faxes manually, the receive mode must be set to mode. (See Chapter 7, “Receiving
Faxes.”)
Q
Did you press [Start] after hanging up the handset?
A
Always press [Start] before hanging up the handset. Otherwise you will disconnect the call.
Print quality is poor.
Are you using the correct type of paper?
A
Make sure you load paper that meets the paper requirements for the machine. For more information, see Chapter 10,
“Making Copies.”
Q
Is the sending fax machine functioning properly?
A
The sending fax machine usually determines the fax's quality. Call the sender and have them make sure the scanning glass
of their fax machine is clean.
Faxes do not print.
Q
Is the cartridge installed properly?
A
Make sure the cartridge is installed properly. For more information, see “Installing/Replacing the Toner Cartridge,” on
p. 2-16.
Faxing Problems
13
Troubleshooting
Q
13-15
Q
Is any toner left in the cartridge?
A
Replace the cartridge with a new one. For more information, see “Installing/Replacing the Toner Cartridge,” on p. 2-16.
A
Select in in of the Menu. With this setting, the machine
will not store documents in the memory even if the toner has run out.
(See “2.TONER SUPPLY LOW,” on p. 15-11.)
Q
Is the correct paper loaded in the cassette?
A
Make sure paper is loaded in the cassette. For more information, see Chapter 4, “Paper Handling.”
A
Load the correct paper size or change in of the Menu. For more information see
Chapter 4, "Paper Handling," or Chapter 10, "Making Copies."
Faxed images are blotched or uneven.
Q
Are the telephone lines in proper condition? Or do you have a good connection?
A
ECM (Error Correction Mode) for sending/receiving should eliminate such problems. However, if the telephone lines are in
poor condition, you may have to try again. Then call the sender to resend the document.
Q
Is the sending fax machine functioning properly?
A
The sending fax machine usually determines the fax's quality. Call the sender and have them make sure the scanning glass
of their fax machine is clean.
Cannot receive a fax using ECM (Error Correction Mode).
Q
Does the sending fax machine support ECM?
A
If the sending fax machine does not support ECM, the document is received in the normal mode without error checking.
Errors occur frequently while receiving.
Troubleshooting
13
13-16
Q
Is the sending fax machine functioning properly?
A
Call the sender and have them check that their fax machine is functioning properly.
Faxing Problems
Telephone Problems
You cannot dial.
Q
Is the telephone line connected properly?
A
Make sure all line connections are secure. (See “Connecting the Telephone Line,” on p. 2-7.)
Q
Is the machine set for the correct telephone line type (pulse/tone)?
A
Make sure the machine is set for the correct telephone line type. (See “Setting the Telephone Line Type,” on p. 3-5)
The telephone disconnects while you are talking.
Q
Is the telephone line connected in securely?
A
Check that the telephone cables are connected securely to the jacks on the machine, the telephone jack on your wall and
the jack on your telephone. (See “Connecting the Telephone Line,” on p. 2-7.)
Troubleshooting
13
Telephone Problems
13-17
Copying Problems
The machine will not make a copy.
13
Q
Is the cartridge installed correctly?
A
Make sure the cartridge is installed correctly. (See “Installing/Replacing the Toner Cartridge,” on p. 2-16.)
Q
Is the sealing tape removed from the cartridge?
A
Remove the sealing tape from the cartridge. (See “Installing/Replacing the Toner Cartridge,” on p. 2-16.)
Q
Is the cassette inserted completely into the machine?
A
Insert the cassette as far as it will go. (See “Loading Paper in the Cassette,” on p. 4-3.)
Q
Did you connect the power cord to the machine just now?
A
Wait for a while. After connecting the power cord, the machine cannot scan documents immediately.
Q
Is the document loaded correctly?
A
Remove the document, stack it if necessary, and load it in the ADF correctly. (See “Loading Documents in the ADF,” on
p. 6-3.)
A
Make sure the ADF is closed.
Troubleshooting
If the documents have black streaks or appear dirty after you feed them in the ADF.
Q
Are the scanning glass and rollers of the ADF clean?
A
Clean the scanning glass and rollers of the ADF. (See “Cleaning the ADF Area,” on p. 14-2.)
NOTE
For additional troubleshooting, see “Print Quality Problems,” on p. 13-19.
13-18
Copying Problems
Print Quality Problems
The print quality is not what you expect; print is not clear, has missing dots or white streaks.
Q
Are the size, thickness and type of the paper you are using within the specifications of the machine?
A
Check that the paper you are using is supported by the specifications of the machine. (See “Print Media Requirements,” on
p. 4-1.)
Q
Is the cartridge installed correctly?
A
Make sure the cartridge is installed correctly. (See “Installing/Replacing the Toner Cartridge,” on p. 2-16.)
Q
Is any toner left in the cartridge?
A
Replace the cartridge if necessary. (See “Installing/Replacing the Toner Cartridge,” on p. 2-16.)
Q
Is the exposure adjusted correctly?
A
Adjust the exposure correctly using [Exposure]. (See “Adjusting the Exposure (Density),” on p. 10-6.)
Copies are dirty.
Q
Is the scanning glass or the scanning glass cover clean?
A
Clean the scanning glass or the scanning glass cover. (See “Cleaning the ADF Area,” on p. 14-2.)
Q
Is the cartridge free of damage?
A
If there is a scratch on the cartridge, replace with a new one. (See “Installing/Replacing the Toner Cartridge,” on p. 2-16.)
Q
Is the machine adjusted to room temperature? If not, condensation might build up inside the machine.
A
Allow at least 2 hours for the machine to adjust to room temperature before attempting to use it.
Print Quality Problems
13-19
Troubleshooting
13
Q
Is the machine installed in a stable location?
A
Install the machine in a proper location. (See “Location” in the “Safety information” on p. v.)
Copies are too dark or too light.
Q
Is the exposure adjusted correctly?
A
Adjust the exposure correctly using [Exposure]. (See “Adjusting the Exposure (Density),” on p. 10-6.)
Q
Is the machine in the toner saver mode?
A
Set to “OFF” in of the Menu. (See “5.TONER SAVER MODE,” on
p. 15-4.)
The printouts are partly missing or shaded when you make copies on heavy paper.
Q
Is the paper type set correctly?
A
Select or in in of the Menu. (See “Loading
Paper,” on p. 4-3.)
The printouts are missing when you make copies on rough paper.
Q
Is the paper type set correctly?
A
Select in in of the Menu. (See “Loading Paper,” on p. 4-3.)
The edges of copies are dirty when you make copies.
Troubleshooting
13
13-20
Q
Is the paper size set correctly?
A
Specify the appropriate paper size in in of the Menu. (See “Loading Paper,” on
p. 4-3.)
Q
Is selected for the paper size?
A
Specify the appropriate size in or in in of
the Menu. (See “Specifying the Paper Size,” on p. 10-2.)
Print Quality Problems
Printing Problems
The Alarm indicator comes on.
Q
Does the machine feed paper correctly, or is there paper in the cassette or multi-purpose feeder?
A
Clear the paper jam, or load paper in the cassette or multi-purpose feeder. (For instructions on clearing paper jam, see
“Clearing Jams,” on p. 13-1. For instructions on loading paper, see “Loading Paper,” on p. 4-3.)
A
If the machine has no paper jam, or paper is loaded in the cassette or multi-purpose feeder, unplug the machine and wait
approx. 3 minutes to 5 minutes, then plug it in again. If the problem is fixed, the Alarm indicator will turn off, and the LCD will
return to the standby mode. If the Alarm indicator remains flash, unplug the machine, and contact your local authorized
Canon dealer or the Canon help line.
Printout does not match paper size.
Q
Is the paper stack loaded and aligned correctly in the cassette, or is paper loaded in the multi-purpose feeder correctly?
A
Make sure the paper is loaded and aligned correctly in the cassette or the paper is loaded correctly in the multi-purpose
feeder. (See “Loading Paper,” on p. 4-3.)
Q
Is the appropriate paper size set through the operation panel?
A
Specify the appropriate paper size in in of the Menu. (See “Loading Paper in the
Cassette,” on p. 4-3.)
Troubleshooting
13
Printing Problems
13-21
If You Cannot Solve the Problem
If you have a problem with your machine and cannot solve it using the information in this chapter, contact the Canon
Customer Care Center.
CAUTION
If the machine makes strange noises, emits smoke or strange smells, unplug it immediately and contact the Canon
Customer Care Center. Do not attempt to disassemble or repair the machine yourself.
NOTE
Attempting to repair the machine yourself may void the limited warranty.
Before contacting the Canon Customer Care Center, make sure you have the following information about your machine:
• The machine’s name: FAXPHONE L170
• The machine serial number (on a label on the back of the machine)
SERIAL NUMBER
• Where you purchased the machine
• A detailed description of the problem
• The steps you have taken to solve the problem, and the results
Troubleshooting
13
13-22
If You Cannot Solve the Problem
14
Maintaining Your Machine
CHAPTER
Your machine requires no maintenance other than periodic cleaning, and replacing of the toner cartridge as needed.
Cleaning the Machine
Clean your machine regularly to keep it in good operating condition.
NOTE
Follow these precautions whenever you clean the machine:
- When cleaning the machine's exterior or the scanning glass, be sure to disconnect the power cord before cleaning the machine.
- When the power cord is disconnected, any documents stored in memory will be erased if you leave the machine unplugged for 1 hour or
more. Be sure to plug the machine in after cleaning to avoid this happening. If appears in the LCD display, follow
steps on p. 7-6 to print out the document.
- If you disconnect the machine while it is waiting to send a document, you will have to set the machine to send your document again once
you finish cleaning the machine. However, when you have set a document for delayed transmission, the machine holds the document in
its memory for about 1 hour.
- Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the components or generate static charges.
- Never use volatile liquids such as thinner, benzene, acetone, or any other chemical cleaner to clean the interior of the machine; these
can damage the machine’s components.
Cleaning the Machine’s Exterior
1
Disconnect the power cord.
2
Wipe the machine’s exterior with a clean, soft, lint-free cloth moistened with water or diluted dishwashing detergent solution.
CAUTION
Never use thinner, benzene, alcohol, or any other organic solvent to clean the machine, as these can damage the machine’s
surface.
3
Plug the power cord back in.
Cleaning the Machine
14-1
Cleaning the ADF Area
Black lines may appear in printouts when the ADF is used to feed documents.
This is caused by paste, ink, correction fluid, or other foreign matters in the read area of the ADF. Use a clean soft cloth to
wipe the read area clean. Take particular care to clean at the locations where the black lines are appearing on printouts.
If you have trouble getting the glass clean, wipe with a cloth moistened with water or a mild neutral detergent, and then
wipe the glass dry with another cloth.
Read area
Copy
Black lines
Paste,ink,
correction fluid,
etc
IMPORTANT
Paste, ink, correction fluid, and other foreign matter can soil the scanning glass when you send a document through the ADF while the
paste, ink, or correction fluid on the original is still wet. This is what causes black lines on copies. Whenever you load a document is the
ADF, always check to make sure that any paste, ink, or correction fluid that is on the document is completely dry.
NOTE
When you unplug the machine, any documents stored in memory will be erased if you leave the machine unplugged for 1 hour or more. Be
sure to plug in the machine after cleaning to avoid this happening.
Maintaining Your Machine
14
14-2
Cleaning the Machine
1
Disconnect the power cord.
2
Open the operation panel by gently pulling it up.
3
Use a soft, dry, clean cloth to clean the scanning glass and rollers (shaded areas).
• If the document scanning glass and rollers are dirty, the documents you send or print will also be dirty.
• Clean with a soft cloth that will not scratch the glass or rollers.
• Use a soft, dry, clean cloth to wipe up paper dust around the rollers.
SCANNING
GLASS
4
Clean the shaded areas of the operation panel and the machine.
Dirt and dust particles that collect on the underside of the operation panel also affect the quality of documents you copy and send.
5
Maintaining Your Machine
14
When you finished, close the operation panel by pressing it down from the center.
NOTE
Be sure to close the operation panel until it locks into place. Otherwise the machine will not function properly.
6
Plug the power cord back in.
Cleaning the Machine
14-3
Transporting the machine
Be sure to disconnect the power cord before transporting the machine. If the machine is likely to be subjected to vibration
(e.g., when transporting over long distances), the following precautions should be taken. If you do not follow these
precautions, the machine may be damaged or the quality of your printouts may be adversely affected.
1
Disconnect the power cord.
2
If the machine is connected to a telephone or your computer, remove the telephone line or printer cable.
3
Open the printer cover.
4
5
Close the printer cover.
6
Pull out the cassette completely, and remove the extension cover from the machine.
7
Detach the cassette extension from the cassette.
8
Insert the cassette in the machine.
9
Remove the output tray and document output tray.
Maintaining Your Machine
14
Grip the end of the cartridge, and remove it from the machine. In order to avoid direct sunlight, place the cartridge in the
protective bag that the cartridge came in when you purchased it.
14-4
Transporting the machine
The Menu System
15
CHAPTER
The Menu allows you to specify or register various settings. This chapter explains the procedure to access the menus and their contents.
Accessing the Menu
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select the menu you want to change ➞ press [Set].
ADDITIONAL FUNCTIONS
COPY SETTINGS
➞
3.COPY SETTINGS
1.STD. IMAGEQUALITY
3
Press [
(-)] or [
(+)] to select the submenu you want to change ➞ press [Set].
COPY SETTINGS
STANDARD EXPOSURE
2.STANDARD EXPOSURE ➞
MANUAL
NOTE
• For details on submenus, see “Menu Descriptions,” on p. 15-2.
• After selecting the item or value with [ (-)] or [ (+)], press [Set] to enter the setting.
• If you press [Stop/Reset] before [Set] is pressed, the item you have selected will not be registered.
• Press [Stop/Reset] to exit from the Menu.
• If you press [Menu], the display returns to the previous screen.
Accessing the Menu
15-1
Menu Descriptions
1. PAPER SETTINGS
Name
Descriptions
1.CASSETTE
1.PAPER SIZE
Sets the paper size for the paper cassette.
A4, B5, A5, LTR, LGL, EXECUTIV, ENVELOPE
(You can select from COM10, MONARCH, DL,
or ISO-C5.)
2.PAPER TYPE
Sets the paper type to be used in the paper
cassette.
PLAIN PAPER, TRANSPARENCY, PLAIN
PAPER L, HEAVY PAPER, HEAVY PAPER H
2.MP TRAY
1.PAPER SIZE
Sets the paper size for the multi-purpose
feeder.
A4, B5, A5, LTR, LGL, EXECUTIV,
ENVELOPE (You can select from DL, ISO-C5,
COM10, or MONARCH), FREESIZE
(Horizontal and vertical size can be specified in
millimeters.)
2.PAPER TYPE
Sets the paper type to be used on the
multi-purpose feeder.
PLAIN PAPER, TRANSPARENCY, PLAIN
PAPER L, HEAVY PAPER, HEAVY PAPER H
(The factory default setting is in bold face.)
The Menu System
15
15-2
Menu Descriptions
2. COMMON SETTINGS
Name
1.DEFAULT SETTINGS
Descriptions
Selects which mode is displayed in the LCD
when the power cord is connected, or the
AUTO CLEAR function activates.
COPY
The Copy mode is selected.
FAX
The Fax mode is selected.
2.SW AFTER AUTO CLR
Selects whether the machine switches to the
mode you set in after
the AUTO CLEAR function activates.
DEFAULT MODE
The machine automatically switches to the
mode you set in after
the AUTO CLEAR function activates.
CURRENT MODE
The machine does not automatically switch to
the mode you set in
even after the AUTO CLEAR function activates.
1.KEYPAD VOLUME
ON
OFF
2.ALARM VOLUME
Adjusts the volume of the machine.
Adjusts the keypad volume.
1 to 3
The volume is turned off.
Adjusts the alarm volume.
ON
1 to 3
OFF
The volume is turned off.
3.TX DONE TONE
Adjusts the volume of the done tone sounded
when the machine has finished sending faxes.
ON
1 to 3
ERROR ONLY
1 to 3
OFF
The volume is turned off.
15
(The factory default setting is in bold face.)
The Menu System
3.VOLUME CONTROL
Menu Descriptions
15-3
Name
4.RX DONE TONE
Descriptions
Adjusts the volume of the done tone sounded
when the machine has finished receiving faxes.
ON
1 to 3
ERROR ONLY
1 to 3
OFF
The volume is turned off.
5.PRINTING END TONE
Adjusts the volume of the done tone sounded
when the machine has finished printing.
ON
1 to 3
ERROR ONLY
1 to 3
OFF
The volume is turned off.
6.SCANNING END TONE
Adjusts the volume of the done tone sounded
when the machine finished scanning.
ON
1 to 3
ERROR ONLY
1 to 3
OFF
The volume is turned off.
7.LINE MONITOR VOL.
ON
OFF
Adjusts the line monitor volume.
1 to 3 (2)
The volume is turned off.
4.PRINT EXPOSURE
Adjusts the exposure to one of 5 levels.
(center)
5.TONER SAVER MODE
Sets the toner saver mode.
ON
The toner saver mode is turned on.
OFF
The toner saver mode is turned off.
6.DISPLAY LANGUAGE
Select the message language.
ENGLISH, FRENCH, SPANISH,
PORTUGUESE
(The factory default setting is in bold face.)
The Menu System
15
15-4
Menu Descriptions
3. COPY SETTINGS
Name
Descriptions
1.STD. IMAGEQUALITY
Select the document type.
TEXT ORIGINAL: Character mode
TEXT/PHOTO*1: Text/photo mode
PHOTO*1: Photo mode
2.STANDARD EXPOSURE
Select the auto or manual mode of exposure
setting.
AUTO*2
The exposure is adjusted automatically.
MANUAL
The exposure is adjusted manually.
The exposure can be adjusted in 9 steps.
(center)
3.STD ZOOM RATIO
Selects the copy ratio 050% to 200%. (100%)
4.STANDARD COPY QTY
Select the copy quantity.
01 to 99 (01)
5.AUTO SORT
Set the auto sort.
OFF
6.PAPER SIZE GROUP
The auto sort function is turned on.
The auto sort function is turned off.
The paper size group can be selected. If the
paper size group is changed, the preset copy
ratios will change.
INCH
Preset copy ratios:50%, 64%, 78%, 100%,
129%, 200%
A
Preset copy ratios:50%, 70%, 100%, 141%,
200%
AB
Preset copy ratios:50%, 70%, 81%, 86%,
100%, 115%, 141%, 200%
7.SHARPNESS
Black and white of an image can be sharpened.
When you want to make characters and lines
clear, select a big number. When you make
copies of photographs, select a small number.
1 to 9 (5)
15
The Menu System
ON
(The factory default setting is in bold face.)
*1 STANDARD EXPOSURE automatically changes to MANUAL when TEXT/PHOTO or PHOTO is selected.
*2 STD. IMAGEQUALITY automatically changes to TEXT ORIGINAL when AUTO is selected.
Menu Descriptions
15-5
4. FAX SETTINGS
Name
1.USER SETTINGS
1.TEL LINE SETTINGS
Descriptions
Specifies the basic operation settings in the Fax
mode.
Specifies the telephone line settings.
1.USER TEL NO.
Your telephone and fax number can be
registered within 20 digits, including spaces.
2.TEL LINE TYPE
Selects the telephone line type.
TOUCH TONE
ROTARY PULSE
The telephone line is set for touch tone dialing.
The telephone line is set for rotary pulse dialing.
3.TX START SPEED
Sets the transmission speed for all documents
you send.
33600bps/14400bps/9600bps/7200bps/
4800bps/2400bps
4.RX START SPEED
Sets the transmission speed for all documents
you receive.
33600bps/14400bps/9600bps/7200bps/
4800bps/2400bps
2.UNIT NAME
You can register your name or your company
name within 24 characters, including spaces.
3.TX TERMINAL ID
Prints your ID (Transmitting Terminal ID) on
each page you transmit.
1.TTI POSITION
OUTSIDE IMAGE: Terminal ID is printed
outside the image border.
INSIDE IMAGE: Terminal ID is printed inside
the image border.
2.TEL NUMBER MARK
Selects the prefix for the identification header
number.
FAX, TEL
(The factory default setting is in bold face.)
The Menu System
15
15-6
Menu Descriptions
Name
4.DENSITY CONTROL
Descriptions
Adjusts the scanning density.
1.LIGHT
Sets for dark documents. 3 to 9 (7)
2.STANDARD
Sets for standard documents. 2 to 8 (5)
3.DARK
Sets for light documents. 1 to 7 (3)
5.OFFHOOK ALARM
ON
Enables/disables the offhook alarm that alerts
you when the handset is not in the handset
cradle.
After reception, the offhook alarm sounds when
the handset is left off the hook.
OFF
No offhook alarm.
2.REPORT SETTINGS
1.TX REPORT
Sets the report setting.
Enables/disables automatic printing of a
transmission report.
OUTPUT NO
No report is printed.
PRINT ERROR ONLY
Prints a report only when a transmission error
occurs.
Enables/disables printing of the first page of the
fax under the report.
ON
Prints the first page.
OFF
No first page is printed.
(The factory default setting is in bold face.)
15
The Menu System
REPORT WITH TX IMAGE
Menu Descriptions
15-7
Name
OUTPUT YES
REPORT WITH TX IMAGE
Descriptions
Prints a report every time you send a document.
Enables/disables printing of the first page of the
fax under the report.
ON
Prints the first page.
OFF
No first page is printed.
2.RX REPORT
Enables/disables automatic printing of a
reception report.
OUTPUT NO
No report is printed.
PRINT ERROR ONLY
Prints a report only when a reception error
occurs.
OUTPUT YES
Prints a report every time you receive a document.
3.ACTIVITY REPORT
ON
OFF
3.TX SETTINGS
1.ECM TX
Enables/disables automatic printing of an
ACTIVITY REPORT after every 20
transactions.
Prints the ACTIVITY REPORT.
No ACTIVITY REPORT is printed.
Sets the transmission functions.
ECM (Error Correction Mode) transmission is
turned on or off.
ON
All transmissions are conducted with ECM if the
other party’s fax supports ECM.
OFF
ECM is turned off.
2.PAUSE TIME
Sets the length of the pause you insert into a
dialing sequence.
01 to 15SEC (02 SEC)
(The factory default setting is in bold face.)
The Menu System
15
15-8
Menu Descriptions
Name
3.AUTO REDIAL
ON
Descriptions
Sets whether to perform automatic redial when
the other line is busy or no answer.
Customizes the redial operation.
1.REDIAL TIMES
Sets the number of retries.
01 to 10TIMES (02 TIMES)
2.REDIAL INTERVAL
Sets period of time between redialings.
02 to 99MIN. (02 MIN.)
OFF
4.TIME OUT
After the first attempt at dialing fails, redialing is
not attempted.
Enables/disables automatic scanning of
documents after the fax number is entered by
using speed dialing.
ON
Scanning begins automatically in 5 or 10
seconds after you enter the phone number.
OFF
Press [Start] to scan document. Otherwise,
AUTO CLEAR function activates and the LCD
returns to standby mode after 2 minutes.
4.RX SETTINGS
1.ECM RX
Sets the reception functions.
ECM (Error Correction Mode) reception is
turned on or off.
ON
All receptions are conducted with ECM if the
other party’s fax supports ECM.
OFF
ECM is turned off.
1.RING START TIME
When FaxTel has been set, the optional
settings are available.
Sets the duration that the machine listens for a
fax tone before starting to ring.
00 to 30SEC (06 SEC)
(The factory default setting is in bold face.)
15
The Menu System
2.FAX/TEL OPT. SET
Menu Descriptions
15-9
Name
Sets the length of time the machine rings to
alert you of an incoming call.
015 to 300SEC (015 SEC)
3.F/T SWITCH ACTION
Selects the action taken after the F/T RING
TIME expires.
RECEIVE
The machine switches to the fax receive mode
automatically at this point and starts to receive
the document.
DISCONNECT
The machine disconnects the call.
3.DRPD: SELECT FAX
If you select DRPD as the receive mode, select
the ring pattern for the fax.
DOUBLE RING
Two short rings at regular intervals.
SHORT-SHORT-LONG
Short-Short-Long at regular intervals.
SHORT-LONG-SHORT
Short-Long-Short at regular intervals.
OTHER RING TYPE
Other type of ring pattern.
NORMAL RING
Ring type of normal telephone line.
4.INCOMING RING
Sets whether the machine rings when it
receives a call when the machine is set to
FaxOnly.
OFF
The machine does not ring when it receives a
fax. (In Energy Saver mode, the fax may ring
one or two times.)
ON
The machine rings when it receives a fax if a
telephone is connected.
RING COUNT
Sets the number of incoming rings before the
machine answers.
01 to 99TIMES (02TIMES)
5.MAN/AUTO SWITCH
Sets whether the machine switches to
document receive mode after ringing for a
specified length of time in the manual receive
mode.
15
The Menu System
Descriptions
2.F/T RING TIME
OFF
The machine keeps ringing until someone
answers the call manually with a connected
extension telephone.
ON
The machine switches to document receive
mode after ringing for a specified time.
F/T RING TIME
Sets the length of time to elapse before the
machine switches to the document receiving.
01 to 99SEC (15SEC)
(The factory default setting is in bold face.)
15-10
Menu Descriptions
Name
6.REMOTE RX
ON
Descriptions
Enables/disables remote receiving.
The machine enables remote receiving.
REMOTE RX ID
OFF
You can dial code on the remote extension to
start receiving a document.
A combination of two characters using [0] to [9],
[ ] and [#] is possible.
The machine disables remote receiving.
5.PRINTER SETTINGS
1.RX REDUCTION
ON
Sets the print functions.
Receives images at a reduced size.
Image reduction is turned on.
1.RX REDUCTION
AUTO SELECTION: Reducing size is set
automatically.
FIXED REDUCTION: Reducing size is preset.
97%, 95%, 90%, 75%
2.SELECT REDUCE DIR
VERTICAL ONLY: Reduction is performed in
the vertical direction only.
HORIZ & VERTICAL: Reduction is performed
in the horizontal and vertical direction.
OFF
2.TONER SUPPLY LOW
Image reduction is turned off.
Allows you to set how the machine responds
when the toner supply is low.
RX TO MEMORY
The machine receives all documents in memory.
KEEP PRINTING
The keep printing function is turned on. With
this setting, the machine will not store
documents in memory if the toner has run out.
Re-set to RX TO MEMORY after replacing the
cartridge with a new one.
(The factory default setting is in bold face.)
The Menu System
15
Menu Descriptions
15-11
Name
6.POLLING BOX
Descriptions
Sets the functions of SETUP FILE, CHANGE
DATA and DELETE FILE.
1.SETUP FILE
Registers a polling box.
1.FILE NAME
Enters a name for poling box (max. 24
characters, including spaces).
2.PASSWORD
Enters a password to protect the polling box
settings (max. 7 characters).
3.ERASE AFTER TX
Tells the machine how to handle a document
after it is polled and sent.
ON, OFF
2.CHANGE DATA
1.FILE NAME
Changes the settings of the polling box.
Changes the file name.
2.PASSWORD
Changes the password.
3.ERASE AFTER TX
Changes the ERASE AFTER TX setting.
3.DELETE FILE
7.SYSTEM SETTINGS
1.MEMORY LOCK RX
Deletes the polling box and all of its settings.
Sets the functions of MEMORY LOCK RX and
FAX DEFAULT.
Set the Memory Lock functions.
OFF
Prints a document as soon as the machine
receives it.
ON
Receives and stores all documents in memory.
They will not be printed out unless the Memory
Lock password is entered.
The Menu System
15
1.MEM LOCK PASSWORD
0 to 9999999
This password protects the Memory Lock
settings. Setting a password is recommended.
You must use this password to unlock the
memory so you can print documents stored in
memory. Use the numeric buttons to enter a
password (up to seven digits).
2.REPORT
Sets the machine to print reports. This setting
affects only reports that print automatically,
such as an Activity Report.
OUTPUT NO
No report prints while in the Memory Lock
mode.
OUTPUT YES
A report prints while the machine is in the
Memory Lock mode.
(The factory default setting is in bold face.)
15-12
Menu Descriptions
Name
2.FAX DEFAULT
1.RESOLUTION
Descriptions
Sets the FAX DEFAULT functions.
Sets the fax resolution.
OFF
The setting of resolution set using [Image
Quality] remains even after the AUTO CLEAR
function activates.
STANDARD
Suitable for most text-only documents.
FINE
Suitable for fine-print documents.
PHOTO
Suitable for documents that contain
photographs.
SUPER FINE
Suitable for documents that contain fine print
and images. (The resolution is four times that of
STANDARD)
ULTRA FINE
Suitable for documents that contain fine print
and images. (The resolution is eight times that
of STANDARD)
2.SCAN DENSITY
Sets the machine’s standard scanning density.
OFF, LIGHT, STANDARD, DARK
(The factory default setting is in bold face.)
5. ADD. REGISTRATION
1.1-TOUCH SPD DIAL
1-TOUCH SPD DIAL
Descriptions
Registers the information on One-Touch Speed
Dialing.
Up to 32 destinations can be registered.
Selects a One-Touch Speed Dial button.
1.TEL NUMBER ENTRY
Registers the other party’s telephone number
(max. 120 digits, including spaces).
2.NAME
Registers the other party’s name (max. 16
characters, including spaces).
2.CODED SPD DIAL
CODED SPD DIAL
15
The Menu System
Name
Registers the information on Coded Speed
Dialing.
Up to 100 destinations can be registered.
Selects a Coded Speed Dialing code.
1.TEL NUMBER ENTRY
Registers the other party’s telephone number
(max. 120 digits, including spaces).
2.NAME
Registers the other party’s name (max. 16
characters, including spaces).
(The factory default setting is in bold face.)
Menu Descriptions
15-13
Name
3.GROUP DIAL
Descriptions
Registers the information on Group Dialing.
Up to 131 groups can be registered.
1.TEL NUMBER ENTRY
Registers the other party’s telephone numbers
by specifying the One-Touch Speed Dial
buttons or Coded Speed Dialing codes.
2.NAME
Registers the group’s name (max. 16 characters,
including spaces).
(The factory default setting is in bold face.)
6. PRINTER SETTINGS
Name
Descriptions
1.PRESET PRINT QTY
Sets the standard number of pages of the
printer function. 01 to 99 (01)
2.AUTO ERROR SKIP
Sets either printing with skipping an error
automatically, or without skipping an error.
ON
The auto error skip is on. The error is skipped
and shifted to the next job automatically without
indicating an error code.
OFF
The auto error skip is off. Skip the error and
shift to the next job manually.
3.ERROR TIME OUT
ON
OFF
4.PRINTER RESET
15
Sets the length of time before the machine
returns an error when no data is received from
the computer.
The error time out is on. Sets time out period
005SEC to 300SEC. (015SEC)
The error time out is off.
Cancels the job currently being received and
the job already received.
The Menu System
(The factory default setting is in bold face.)
15-14
Menu Descriptions
7. TIMER SETTINGS
Name
Descriptions
1.DATE/TIME SETTING
Enter the current date and time.
2.AUTO CLEAR
Sets the auto clear function. If the machine
remains idle for a certain period of time, the
display returns to the standby mode.
ON
The auto clear function is turned on.
1MIN. to 9MIN. (2MIN.)
OFF
The auto clear function is turned off.
3.ENERGY SAVER
ON
Sets the energy saver mode.
The energy saver mode is set.
03MIN. to 30MIN. (05MIN.)
OFF
The energy saver mode is turned off.
4.DATE SETUP
Set the format for the DATE & TIME settings
menu and how the date is displayed in the LCD.
MM/DD/YYYY, DD/MMYYYY, YYYY MM/DD
5.DAYLGHT SAV TIME
Sets the daylight saving time.
OFF
The daylight saving time setting is disabled.
ON
The daylight saving time setting is enabled.
1.START DATE/TIME
Sets the MONTH, WEEK, DAY and TIME when
the daylight saving time starts.
2.END DATE/TIME
Sets the MONTH, WEEK, DAY and TIME when
the daylight saving time ends.
(The factory default setting is in bold face.)
The Menu System
15
Menu Descriptions
15-15
8. PRINT LISTS
Name
Descriptions
1.USER DATA
Prints out a list of items set or registered in the
Menu.
2.SPEED DIAL LIST
Prints the list of the fax/telephone numbers
registered for One-Touch Speed Dial buttons,
Coded Speed Dialing codes or group dialing.
1.1-TOUCH LIST
Prints the One-touch List.
1.NO SORT
The printout of the list is not sorted.
2.SORT
The printout of the list is sorted.
2.CODED DIAL LIST
Prints the Coded Dial List.
1.NO SORT
The printout of the list is not sorted.
2.SORT
The printout of the list is sorted.
3.GROUP DIAL LIST
3.CANCEL REPORT
REPORT STATUS
Prints the Group Dial List.
Cancels printout of the report. Select report you
want to cancel the printout.
Displays the report status and allows you to
select the report job to be canceled. Select a
job ➞ press [Set].
CANCEL REPORT? YES
The printout of the list is canceled.
CANCEL REPORT? NO
The printout of the list is not canceled.
(The factory default setting is in bold face.)
The Menu System
15
15-16
Menu Descriptions
A
Specifications
APPENDIX
The specifications for the machine are listed in this section.
General
Applicable line:
Compatibility:
Data compression system:
Modem type:
Modem speed:
Transmission speed:
Transmission/reception memory
Liquid crystal display:
Display languages:
Power source:
Power consumption:
Dimensions
(W × D × H):
Weight:
Environmental requirements:
Applicable standards:
*
Public Switched Telephone Network
G3
MH, MR, MMR, JBIG
FAX modem
33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000,
9600, 7200, 4800, 2400 bps (automatic fallback)
Approx. 3 seconds/page*
(transmitting from memory)
Approx. 7.2 MB, DRAM, JBIG storage
Approx. 450 pages**
LCD displays memory used
Uses direct transmission when memory is full
20 × 2
ENGLISH, FRENCH, SPANISH, PORTUGUESE
120 V, 60 Hz [Power source differs depending on the country in which you
purchased the product.]
Maximum: Approx. 600W
Minimum: Approx. 9 W
Energy Saver Mode: 5 W
17 1/4” × 18 3/16” × 13 25/64” (438 × 462 × 340 mm)
(main machine only, no trays, no handset)
24.7 lb (11.2 kg)
Temperature: 50°F to 90.5°F (10°C–32.5°C)
Humidity: 20–80% RH
Electrical safety: UL1950, C-UL
Radiation: FCC Part 15 Class B, IC Class B
PTT: FCC part 68, IC CS-03, Energy Star Compliant
PC Interface:
USB 1.1
Based on Canon FAX Standard Chart No.1, JBIG, standard mode
** Based on Canon FAX Standard Chart No.1, standard mode
General
A-1
Fax
50 A4- or letter-size sheets
Automatic document feeder capacity:* 20 legal-size sheets
1 sheet for sizes other than A4-, letter-, or legal-size sheets.
Document size:
Document thickness
Multi-page document: 13 lb to 28 lb (50 – 105 g/m2)
One-page document: 13 lb to 64 lb (50 – 240 g/m2)
Transmission time:
Approx. 3 seconds** (G3 JBIG)
Scanning image processing:
Standard mode: 203 pixels/in. × 98 lines/in. (8 pixels/mm × 3.85 lines/mm)
Fine mode: 203 pixels/in. × 196 lines/in. (8 pixels/mm × 7.7 lines/mm)
Photo mode: 203 pixels/in. × 196 lines/in. (8 pixels/mm × 7.7 lines/mm)
Super fine mode: 203 pixels/in. × 391 lines/in. (8 pixels/mm × 15.4 lines/mm)
Ultra fine mode: 406 pixels/in. × 391 lines/in. (16 pixels/mm × 15.4 lines/mm)
Ultra-High-Quality Image
Processing System (UHQ™)
Halftones: 256 levels of gray
9 density adjustment levels
Recording method:
Laser Beam printing
Fax printing speed:
Approx. 19 pages/minute**
Dialing:
A
Specifications
Multi-page document: 0.003”-0.005” (0.07 – 0.13 mm)
One-page document: 0.002”-0.009” (0.06 – 0.23 mm)
Document weight:
Resolution:
Networking:
Report/reference:
Toner saver:
*
Multi-page document: Max.: 8 1/2” × 14” (216 × 356 mm)/ Min.: 5 53/64” × 4
9/64” (148 × 105 mm)
One-page document: Max.: 8 1/2” × approx.39 3/8”
(216 mm × approx. 1 m)/ Min.: 5 53/64” × 4 9/64” (148 × 105 mm)
Automatic dialing:
– One-Touch Speed Dialing (32 locations)
– Coded Speed Dialing (100 locations)
– Group Dialing (131 locations)
Regular 10-button dialing
(with numeric buttons)
Automatic redialing
Manual redialing
Pause button
Delayed transmission (up to 142 locations at a single pre-set time)
Sequential broadcast (up to 142 locations)
Automatic receiving
Non-ring reception
Deactivate ECM
DRPD (Distinctive Ring Pattern Detection)
Activity report (up to 20 transactions)
Non-delivery report
TTI (Transmit Terminal Identification)
Economy mode for printing received faxes decreases toner consumption by
approx. 30%
Based on 20 lb (75 g/m2) paper
** Based on Canon FAX Standard Chart No.1, LTR, standard mode
A-2
Fax
Copier
Scan resolution:
Default size:
Zoom:
Multiple copies:
300 × 300 dpi
100%
50-200%
Up to 99 copies of a document
Telephone
• Automatic FAX/TEL switchover
• Answering machine connection
(CNG detecting signal)
• Telephone connection
• Handset connection
• Remote reception by telephone
(Default reception ID: 25)
• Tone button
• Redial/Pause button
Specifications
A
Copier
A-3
Printer
Printing method:
Printing resolution:
Paper handling:
Laser beam printing
1200 dpi enhanced × 600 dpi*
Automatic feed
Acceptable recording paper stock
Cassette Feeding: 17 lb to 34 lb (64 g/m2 to 128 g/m2) ; Multi-Purpose
Feeder: 17 lb to 34 lb (64 g/m2 to 128 g/m2)
Plain paper, colored paper, recycled paper (including 100% recycled
paper), transparencies, envelopes, labels, and heavy paper
(up to 34 lb (128 g/m2))
Envelope sizes:
European DL envelope (8 43/64” × 4 21/64” (220 × 110 mm))
U.S. Commercial No. 10 envelope (9 1/2” × 4 3/32” (241 × 104 mm))
Envelope Monarch (7 33/64” × 3 55/64” (191 × 98 mm))
Envelope ISO-C5 (9 1/64” × 6 3/8” (229 × 162 mm))
Printing width:
Maximum 8 7/64” (212 mm (LTR))
Paper Feeding System
Cassette Feeding: 250 sheets of 17 lb (64 g/m2)
Multi-Purpose Feeder: 1 sheet
Printing Cartridge
S35 S-Cartridge** (Yield: Approx. 2,500 pages)
S35 Cartridge (Yield: Approx. 3,500 pages)
Specifications
A
*
FAXPHONE L170 is equipped with a printer engine of 600 dpi resolution. By adopting Canon's own Image Refinement, an 1200 dpi
enhanced × 600 dpi image can be obtained.
** S35 S-Cartridge is a starter cartridge supplied with the machine.
A-4
Printer
Printable Area: Papers
The shaded area in the following figure shows the printable area for papers.
■ Printable area:
Legal size
A4 size
8.5”
Max. 0.2”
Max. 0.2”
11.0”
Max. 0.2”
Max. 0.2”
8.5”
Max. 0.2”
Max. 0.2”
14.0”
Max. 0.2”
Max. 0.2”
210mm
max. 5.0mm
max. 5.0mm
297mm
max. 5.0mm
max. 5.0mm
A
Specifications
a:
b:
c:
d:
e:
f:
Letter size
Printer
A-5
Printable Area: Envelopes
The shaded portion in the following figure shows the printable area for envelopes.
b
c
e
d
f
■ Printable area:
U.S. Commercial No. 10
European DL
4.1”
Max. 0.2”
Max. 0.2”
9.5”
Max. 0.2”
Max. 0.2”
110mm
Max. 5.0mm
Max. 5.0mm
220mm
Max. 5.0mm
Max. 5.0mm
a:
b:
c:
d:
e:
f:
CAUTION
For some envelope types, the edges of the envelope can not be printed on.
Specifications
A
A-6
Printer
Document Sizes
The following illustrations show the largest and smallest documents you can feed into the machine.
Maximum Document Size
Minimum Document Size
8 1/2" (216 mm)
5 53/64" (148 mm)
4 9/64"
(105 mm)
Multi-page document :
14" (356 mm)
One-page document :
39 3/8" (1 meter)
The figure below shows how much of a letter-, A4-, or legal-size document the machine scans when faxing or scanning.
MAX. 5/32" (4.0 mm)
A4/LETTER/LEGAL
Specifications
A
MAX. 5/32" (4.0 mm)
MAX. 1/8" (3.0 mm)
MAX. 5/32" (4.0 mm)
The margin at each edge is outside the machine’s scanning area.
Document Sizes
A-7
Printer Driver
System requirements:
Specifications
A
A-8
Printer Driver
IBM or compatible computer with the following Pentium processor:
Microsoft Windows® 98, Windows® Me, Windows® 2000, or
Windows® XP
–Windows® 98: A 90-megahertz (MHz) Pentium processor or higher/At
least 32 MB of RAM and 100 MB of available hard disk space
–Windows® Me: A 150-MHz Pentium processor or higher/At least 32 MB of
RAM and 100 MB of available hard disk space
–Windows® 2000: A 133-MHz Pentium processor or higher/At least 64 MB
of RAM (Windows® 2000 Professional), or 128 MB of RAM (Windows®
2000 Server) and 500 MB of available hard disk space
–Windows® XP: A 233-MHz Pentium processor or higher/At least 64 MB of
RAM and 500 MB of available hard disk space
256-color SVGA monitor or greater
USB Port
USB cable no longer than 16.4 feet (5m)
CD-ROM Drive, or access to one over a network connection
Glossary
G
APPENDIX
A
AC
Alternating current. The type of electrical current available from a wall outlet.
Activity report
A journal of the machine’s fax transactions, both sent and received.
Application program
Software prepared for a specific function or set of functions. Developers who make application programs include drivers that support
different types of printers.
ASCII
Acronym for American Standard Code for Information Interchange. A set of definitions for the bit composition of characters and
symbols. ASCII defines 128 symbols using 7 binary bits and 1 parity bit.
Auto FAX/TEL switching
See FAX/TEL switching.
Automatic dialing
Dialing fax or telephone numbers by pressing one or three buttons. To use automatic dialing, you must register the numbers in the
machine’s memory. See also One-Touch Speed Dialing, Coded Speed Dialing, and Group Dialing.
Automatic Document Feeder (ADF)
The device included in the machine that feeds the document being faxed, copied, or scanned into the machine.
Automatic image reduction
The machine can print the date, time, company name, and a fax number at the top of the faxes it receives. To prevent this information
from crowding the faxed image on the page and possibly lengthening the fax, the machine automatically reduces the size of the
image on the page.
Automatic redialing
When the receiving fax machine is busy or does not answer, or when an error occurs while sending, the machine waits a specified
time and then automatically redials the number. If the receiving fax is still busy or does not answer, the machine waits the specified
time and dials again. If the fax still does not go through, the machine prints an error TX report.
G-1
B
bps
Bits per second. Refers to the speed with which a fax machine sends and receives data.
Broadcasting
Transmitting documents to more than one location (through the machine’s memory).
C
CCITT/ITU-T
Formerly known as CCITT, Consultative Committee for International Telegraph and Telephone. CCITT has been replaced by the
International Telecommunications Union-Telecommunications sector (ITU-T), a committee created to set international standards for
telecommunications.
CNG
Calling Tone. This is a signal sent by fax machines to identify the call as an incoming document. When the receiving fax detects this
signal, it automatically starts to receive the fax transmission. The majority of fax machines in use today can send and detect CNG
signals.
Coded Speed Dialing
An automatic dialing method that allows you to dial a fax or telephone number by pressing [Coded Dial] and a two-digit code using
the numeric buttons.
Cursor
The underline symbol you see on the LCD display when you register numbers and names in the machine. Press [
move the cursor.
(-)] or [
(+)] to
D
Delayed sending
The ability to send a document at a preset time in the future. You do not have to be in your office to use delayed sending to one or
more destinations. (You can set up only one delayed transmission at a time on the machine.)
Dialing methods
Ways of pressing one or more buttons to access a number to connect to an outside party or fax machine. Dialing methods include
One-Touch, Coded Speed Dialing, Group Dialing, Directory Dialing, and regular dialing with the numeric buttons.
Document
The sheet of paper containing the data that you send to, or receive from a machine.
dpi
Dots per inch. A machine of measurement for indicating a machine’s resolution. Your machine produces a resolution of 1200 dpi
enhanced × 600 dpi.
DRPD (Distinctive Ring Pattern Detection)
Assigns two or more telephone numbers with distinctive ring patterns to a single telephone line, allowing you to have both a fax
number(s) and a telephone number(s) using only one telephone line. Your fax will automatically monitor incoming calls and based on
the ring pattern, will let you know if the call is a fax or voice call.
G
Glossary
Dual access (Multitasking)
Enables the machine to receive a fax, even if it is copying or printing a document. Also enables you to load other faxes into memory,
make copies, print out reports, print documents or register information while the machine sends a fax from memory.
G-2
E
ECM
Error Correction Mode. The ability of your machine to reduce system and line errors when sending or receiving from another fax with
ECM capability. ECM is most effective in areas where the telephone lines are in poor condition or there is frequent interference on
the line. Do not use ECM if you need to send a document quickly and you are sure the other party can read your transmission without
it (turning off ECM also turns off MMR).
Extension
A telephone connected to the machine that is used in place of the handset. You can use the extension telephone to activate incoming
reception of documents manually.
F
FAX/TEL switching
This option allows you to set the machine to automatically detect whether a call is from a fax or telephone. If the call is from another
fax, the transmission is automatically received. If the call is from a telephone, the machine rings to let you know, so you can pick up
the handset. With this feature, one telephone line can be shared by both the telephone and the fax.
FINE
The resolution setting for documents with very small characters and lines.
G
G3, Group 3 fax machine
Defined by CCITT/ITU-T. Uses encoding schemes to transmit image data while reducing the amount of data that needs to be
transmitted, thus reducing transmission time. G3 fax machines can transmit one page in less than one minute. Encoding schemes for
G3 fax machines are Modified Huffman (MH), Modified READ (MR), and Modified Modified READ (MMR).
Grayscale
Representing color in black and white as a result of different intensities of color. Different colors and intensities of colors appear as
different shades of gray.
Group Dialing
A dialing method that enables you to dial up to 131 registered One-Touch Speed Dialing or Coded Speed Dialing numbers together
as a group. This means that you can press just one or three buttons to enter numbers when sending the same document to many
destinations.
H
Halftone
Using this method, the machine produces shades of gray by mapping dots to be printed.
Glossary
G
G-3
I
Interface
The connection between two devices that makes it possible for them to communicate with each other. The machine features a USB
interface, which makes it compatible with IBM and similar personal computers.
Interface cable
The cable used to create the interface between a printer and a computer.
Interface port
The machine comes with one USB port, located on the back of the machine. You attach the cable that connects your computer and
machine to this port.
J
Jack
The telephone receptacles on your wall or on your machine used to connect the machine to the telephone line, answering machine,
handset, or telephone.
M
Manual receiving
A method of receiving faxes in which you answer all incoming calls using the optional handset. If you hear a slow beep it indicates an
incoming fax transmission from another machine. Just press [Start] to receive the incoming fax.
Manual redialing
When you use regular dialing, you can redial a number manually simply by pressing [Redial/Pause] on the operation panel. The last
number called is the number redialed.
Memory broadcast
Allows you to send a scanned fax to as many as 142 locations at once, using a combination of One-Touch Speed Dialing, Coded
Speed Dialing, and regular dialing.
Memory sending
Scans a document into memory before the machine dials the number(s) and sends it. This method allows you to retrieve your original
document immediately after scanning.
Modem
A device that converts (MOdulates) digital data for transmission over telephone lines. At the receiving end, this device converts the
modulated data (DEModulates) to digital format that the computer understands.
N
Noise
A term applied to a variety of problems that impair the operation of telephone lines used for faxing.
Numeric buttons
G
Glossary
The round, numbered buttons on the operation panel marked the same as a standard telephone keypad. Press them to perform
regular dialing. You also use the numeric buttons to enter numbers and letters when you register numbers and names, and for
entering Coded Speed Dialing codes.
G-4
O
One-Touch Speed Dialing
An automatic dialing method that allows you to dial a fax or telephone number by pressing a single One-Touch Speed Dial button.
The machine can store up to 32 numbers for One-Touch Speed Dialing.
One-Touch Speed Dial buttons
The buttons numbered 1 to 32 on the operation panel, each of which may be registered as a fax or telephone number. Once a
number is registered, you press one button to dial the entire number.
P
Paper feed
Refers to guiding a sheet of paper into the machine’s paper path.
Pause
A timing entry required for registering certain long distance numbers and for dialing out through some telephone systems or
switchboards. Pressing [Redial/Pause] enters a pause between digits of a telephone number.
Photo
The document setting you use for sending or copying documents with intermediate tones, such as photographs.
Polling
One fax machine requesting another to send a document. The receiving party calls the fax machine holding the document to be sent,
and requests that it be sent.
Printable area
The area of a sheet of paper on which a printer can reproduce text or graphics (the printing area is smaller than the paper). On this
machine, the printing area varies depending on the type of paper being used.
Printer driver
The printer driver allows you to use the machine as a printer for your PC with Windows 98, Windows Me, Windows 2000, or Windows
XP installed. To use the machine as a printer, install the supplied printer driver in your PC.
Pulse
See Rotary pulse.
R
RAM
Random Access Memory. Memory that is used for temporary storage of information such as: documents you want to print, scanned
and received documents, and downloaded fonts.
Receive mode
The button that controls how the machine receives fax and telephone calls.
Receiving
G-5
G
Glossary
Receiving transmission is also defined as RX or Reception. The machine can be customized to receive fax documents in many ways:
• Receive fax documents only (FaxOnly Mode)
• Receive both telephone calls and fax documents on the same line (FaxTel Mode)
• Receive telephone calls and fax documents manually (Manual Mode)
• Receive fax documents automatically and route voice calls to the answering machine (AnsMode)
• Distinguish between fax and voice calls by using Distinctive Ring Pattern Detection (DRPD Mode)
Reception
See Receiving.
Redialing-automatic
See Automatic Redialing.
Redialing-manual
See Manual Redialing.
Reduction mode
The machine’s automatic feature that slightly reduces the received image to allow room at the top of the page for the sender’s ID
information. You can also reduce the size of large incoming documents using the option.
Registering
A process by which you place fax or telephone numbers and names in the machine’s memory for automatic dialing so that you can
save time dialing frequently called destinations.
Regular dialing
Pressing the individual numeric buttons to dial a fax or telephone number.
Remote receiving ID
The two-digit code that enables you to manually activate fax reception using a telephone that is connected to the machine.
Remote reception
Activating fax reception by answering a telephone that is connected to the machine, but that is not located near the machine. You
need to dial a remote receiving ID number to start remote reception.
Report
A document printed by the machine and containing information about the faxes it has sent or received.
Resolution
The density of dots for any given output device. Expressed in terms of dots per inch (dpi). Low resolution causes font characters and
graphics to have a jagged appearance. Higher resolution means smoother curves and angles as well as a better match to traditional
typeface designs. Resolution values are represented by horizontal data and vertical data, for example, 360 × 360 dpi. This machine
produces output with 1200 dpi enhanced × 600 dpi.
Rotary pulse
A telephone dialing system where a dial is rotated to send pulses to the telephone switching system. When you pulse dial, you hear
clicks. When you touch-tone dial, the most common dialing system, you hear tones. Rotary pulse dialing requires certain setting
adjustments.
RX
See Receiving.
S
Scanning contrast
A setting that darkens or lightens the scanning of documents.
Sender ID
G
Glossary
Information printed at the top of a fax (also called TTI or Transmit Terminal ID):
• Date and time the fax was sent
• Sender’s fax/phone number
• Sender’s name
• Your name or company name
• Page number
G-6
Sending
A fax document that has been scanned by a fax machine and sent over telephone lines, in the form of electrical pulses, to another fax
machine. Also called TX or Transmit.
Sending speed
The rate at which faxes are transmitted through the phone line. See also bps (bits per seconds).
STANDARD
A document setting for sending normal typewritten or printed documents containing only text and no drawings, photographs, or
illustrations.
Standby
The mode in which the machine is on and ready to use.
T
Timed sending
See Delayed sending.
Tone
A button that allows you to temporarily switch to touch-tone from pulse dialing. In some countries, on-line data services may require
that you use tone dialing.
Tone/pulse setting
The ability to set the machine to match the telephone dialing system your telephone line uses: touch-tone or rotary pulse.
Toner
A black, resin coated powder contained in the toner cartridge. The machine applies the toner to the surface of the photosensitive
drum inside the machine via an electrophotographic mechanism.
Toner saver
You can enable or disable economy printing (toner saving feature). By enabling the ECONOMY PRT setting, toner consumption can
be decreased by approx. 30%, resulting in a longer effective cartridge life.
Transaction number
A unique number assigned to each fax document sent (TX NO.) or received (RX NO.) by the machine and used to identify that
particular fax document.
Transmit
See Sending.
TTI
Transmit Terminal ID. See Sender ID.
TX
See Sending.
U
An exclusive Canon digital image processing system that incorporates 256 shades of gray along with a special edge enhancement
feature which ensures that text and photos are transmitted with ultimate clarity.
G-7
Glossary
G
UHQ™ (Ultra High Quality)
Glossary
G
G-8
I
Index
Numerics
((-), )(+) buttons, 2-11
A
Activity Report, 12-1
ADD. REGISTRATION, 15-13
ADF (Automatic Document Feeder), 2-9
Alarm indicator, 2-11
AnsMode, 7-1, 7-5
Answering machine
using, 7-5
Attaching components
document output tray, 2-4
output tray, 2-4
B
Broadcasting, 6-12
C
Canceling
automatic redialing, 6-10
incoming fax, 7-7
memory sending, 6-9
Cassette, 2-9
loading envelopes, 4-5
loading paper, 4-3
CD-ROM, 2-2
CHANGE CARTRIDGE message, 7-6
CHANGE PAPERSIZE message, 13-7
CHECK DOCUMENT message, 13-7
CHECK PRINTER message, 13-7
Clear button, 2-12
Coded Dial button, 2-11
Coded Speed Dial List, 12-7
Coded Speed Dialing, 5-1, 6-6
changing or deleting numbers, 5-6
storing numbers, 5-5
using, 5-7
Collate copy, 1-3, 10-8
COMMON SETTINGS, 15-3
Connection
power cord, 2-7
CHAPTER
telephone line, 2-7
USB port, 2-6
COPY button, 2-11
COPY SETTINGS, 15-5
COPY STATUS, 11-1
Copying, 10-1
enlarging/reducing, 10-4
specifying the paper size, 10-2
specifying the paper type, 10-3
Custom copy ratio, 10-5
D
Daylight Saving time setting, 3-5
Delayed sending, 6-14
Delayed Transmission button, 2-12
Delete button, 2-12
Directory button, 2-11
Directory Dialing, 5-1, 6-6
using, 5-11
Document
loading in the ADF, 6-3
requirements, 6-1
scanning area, 6-2
Document feeder tray, 2-9
Document Memory List, 12-10
Document output tray, 2-9
attaching, 2-4
DOCUMENT TOO LONG, 13-7
DOCUMENTATION, 2-2
DRPD, 7-1, 7-5
E
Energy Saver button, 2-11
Energy saver mode
restoring from, 2-14
setting manually, 2-14
Enlarge/Reduce button, 2-11
Entering
date and time, 3-4
method, 3-1
numbers for Coded Speed Dialing, 5-5
numbers for Group Dialing, 5-8
numbers for One-Touch Speed Dialing, 5-2
your fax number and name, 3-4
Envelope
loading in the cassette, 4-5
I-1
loading in the multi-purpose feeder, 4-9
Error Correction Mode (ECM), 1-2
Error TX Report, 12-2
Exposure button, 2-11
Extension cover, 2-10
Extension phone jack, 2-10
F
F/T RING TIME, 7-2
F/T SWITCH ACTION, 7-2
Face up cover, 2-10
FAX button, 2-11
FAX MONITOR, 11-1
FAX SETTINGS, 15-6
FaxOnly Mode, 7-1, 7-5
FaxTel Mode, 7-1, 7-2, 7-3
setting options, 7-2
Front view, 2-9
MAKING SPACE IN MEM message, 13-8
Manual Mode, 7-1, 7-4
Manual sending, 6-6, 6-8
MEM IN USE nn % message, 13-7
Memory Clear Report, 12-5
MEMORY FULL message, 13-7
Memory Lock, 9-3
password, 9-3
Memory receiving, 7-6
Memory sending, 6-6, 6-7
canceling, 6-9
redialing automatically, 6-10
Menu button, 2-11
Menu System, 15-1
Multi TX/RX Report, 12-3
Multi-purpose feeder, 2-9
loading envelope, 4-9
loading paper, 4-8
Multitasking, 7-7
N
G
Group Dial List, 12-8
Group Dialing, 5-1, 6-6
changing or deleting numbers, 5-9
storing numbers, 5-8
using, 5-10, 6-13
H
Handset
manual sending, 6-6, 6-8
Handset jack, 2-10
HANG UP PHONE, 13-7
Hook button, 2-11
I
Image Quality button, 2-11
In Use/Memory indicator, 2-11
INCORRECT PAPER SIZE message, 13-7
INSTALL CARTRIDGE message, 13-7
Index
I
L
LCD display, 2-11
LCD Messages, 13-7
LOAD LTR SIZE PAPER message, 13-7
Long distance dialing, 9-1
M
Maintenance
cleaning, 14-1
I-2
NOT REGISTERED message, 13-7
Numeric buttons, 2-11
O
One-Touch Speed Dial buttons, 2-11
One-Touch Speed Dial List, 12-7
One-Touch Speed Dial panel, 2-11
One-Touch Speed Dialing, 5-1, 6-6
changing or deleting numbers, 5-3
storing numbers, 5-2
using, 5-4
Operation panel, 2-9, 2-11
Orientation, 4-11
Output tray, 2-9
P
Paper cassette
installing, 2-5
Paper jam
clearing, 13-1
Paper output area
face down, 4-13
face up, 4-13
guidelines, 4-12
selecting, 4-12
PAPER SETTINGS, 15-2
Polling
receiving, 8-2
sending, 8-3
Polling box
changing settings, 8-5
deleting, 8-6
scanning document into the memory, 8-4
setting up, 8-3
Polling button, 2-12
Power Cord, 2-2
connecting, 2-7
Power socket, 2-10
Preset copy ratio, 10-4
PRINT LISTS, 15-16
PRINT STATUS, 11-1
Printer cover, 2-9
PRINTER DATA ERROR message, 13-7
Printer driver, 1-4
PRINTER SETTINGS, 15-14
R
Rear view, 2-10
REC. PAPER JAM message, 7-6, 13-8
Receive mode
AnsMode, 7-1
FaxOnly, 7-1
FaxTel, 7-1
Manual, 7-1
setting, 7-2
Receive Mode button, 2-12
RECEIVED IN MEMORY message, 13-8
Recording paper
loading in the cassette, 4-3
loading in the multi-purpose feeder, 4-8
printing areas, 4-2
requirements, 4-1
Redial/Pause button, 2-11
Redialing
automatically, 6-10
canceling, 6-10
manually, 6-10
setting up, 6-10
Regular Dialing, 6-6
Removing Jammed Paper from the ADF, 13-6
REPLACE CARTRIDGE message, 13-8
Report button, 2-12
REPORT STATUS, 11-1
Reserve copy, 10-9
Restriction
enabling, 9-3
RING START TIME, 7-2
Ringer Volume Switch, 2-13
RX Report, 12-4
scanning resolution (fax), 6-4
telephone line type, 3-5
Shipping Materials
removing, 2-3
Slide guides, 2-9
Space button, 2-12
Specifications, A-1
Speed Dialing Lists, 12-6
START AGAIN message, 13-8
Start button, 2-11
Stop/Reset button, 2-11
SUPPLY REC. PAPER message, 7-6, 13-8
SYSTEM ERROR, 13-8
System Monitor button, 2-11
T
Telephone line
connecting, 2-7
Telephone Line Cord, 2-2
Telephone line jack, 2-10
Telephone line type
setting, 3-5
TIMER SETTINGS, 15-15
Tone button, 2-11
Tone dialing, 9-2
Toner cartridge
handling and storing, 2-14, 2-15
installing and replacing, 2-16
Transfer roller, 13-2
Transporting, 14-4
TTI, 3-3
TX Report, 12-3
TX/RX NO. nnnn**, 13-8
U
Unpacking, 2-2
USB port, 2-10
connecting, 2-6
User’s Data List, 12-9
S
I
Index
S35 Cartridge, 2-3
Scanning density
adjusting to copy, 10-6
adjusting to fax, 6-5
Scanning resolution
adjusting to copy, 10-6
adjusting to fax, 6-4
Set button, 2-11
Setting
daylight saving time, 3-5
receive mode, 7-2
scanning density (fax), 6-5
I-3
Index
I
I-4
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : Yes
Encryption : Standard V1.2 (40-bit)
User Access : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date : 2004:09:07 09:59:41+09:00
Create Date : 2004:02:26 15:37:41Z
Page Count : 195
Creation Date : 2004:02:26 15:37:41Z
Mod Date : 2004:09:07 09:59:41+09:00
Producer : Acrobat Distiller 5.0.5 (Windows)
Author :
Metadata Date : 2004:09:07 09:59:41+09:00
Creator :
Title :
Page Mode : UseOutlines
Has XFA : No
EXIF Metadata provided by EXIF.tools
.