Tmp2387186775075032453 Fed Ex Rate Services WSDL Guide

User Manual:

Open the PDF directly: View PDF .
Page Count: 295 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Contents
About This Guide
1: Introduction
2: Rate Services
Index
Schema RateService_v10.xsd

July 2011

Rate Services

Legal and Copyright Notices

Agreement. The information in this document may be changed at any time

Payment without notice. Any conflict between this guide, the FedEx Automation

You must remit payment in accordance with the FedEx Service Guide, tariff, Agreement and the FedEx Service Guide shall be governed by the FedEx

service agreement or other terms or instructions provided to you by FedEx Automation Agreement and the FedEx Service Guide, in that order.

of equipment failure or for the failure of FedEx to repair or replace any rights reserved. Unpublished.

equipment.

Disclaimer

Confidential and Proprietary

All Improper Transaction scenarios are for example only. They do not reflect

The information contained in this guide is confidential and proprietary to all error condition scenarios.

FedEx Corporate Services, Inc. and its affiliates (collectively “FedEx”). No part

of this guide may be distributed or disclosed in any form to any third party

without written permission of FedEx. This guide is provided to you under and

its use is subject to the terms and conditions of the FedEx Automation

FedEx Web Services, Rate Services 2

Contents

Understanding the XML Schema ................................................................. 17

About This Guide ............................................................................ 4

Implementation Process ................................................................................ 22

Document Organization ................................................................................... 5

Resources ........................................................................................................ 5 2 Rate Services ............................................................................ 25

Support ............................................................................................................ 5 Rate ............................................................................................................... 26

Rate Available Services/Rate Shopping ...................................................... 26

1 Introduction ................................................................................. 6

Surcharges and Discounts ............................................................................ 31

Document Overview ........................................................................................ 7

XML Schema ................................................................................................. 34

Web Services, WSDL, and SOAP Overview .................................................. 9

Error Messages ............................................................................................. 34

Implementing FedEx Web Services .............................................................. 17

FedEx Web Services, Rate Services 3

About This Guide

Support

Document Organization

Resources

About This Guide

This guide describes how to work with FedEx Web Services. •FedEx Service Guide:fedex.com/us/service-guide

It is written for the application developer who uses web services to design •Web Services organization home page: www.webservices.org

and deploy applications enabled by FedEx. It describes how to get started •Microsoft Web Services: msdn.microsoft.com/webservices

with application development and how to use the Application Programming •O’Reilly XML.com: www.xml.com

Interface (API). It also describes each available service in addition to the

•Secure Socket Layer Certificates: fedex.com/us/developer/downloads/

business logic that drives each FedEx process.

dev_cert.zip

Document Organization Support

Each web service provides access to FedEx features. The service description

For FedEx Web Services technical support, you can reach FedEx at

includes service details and a full schema listing to facilitate application

websupport@fedex.com or call 1.877.339.2774 and state “Web Services”

development.

at the voice prompt. Support hours are Monday through Friday, 7 a.m. to 9

p.m. (CST) and Saturday, 9 a.m. to 3 p.m. (CST). For FedEx Customer Service,

Resources call 1.800.GoFedEx 1.800.463.3339.

The following may also be useful for FedEx Web Services developers:

•FedEx Services At-a-Glance: fedex.com/us/services/ataglance

FedEx Web Services, Rate Services 5

1 Introduction

Implementation Process

Document Overview

Web Services, WSDL, and SOAP Overview

Implementing FedEx Web Services

Understanding the XML Schema

ChapterChapter 11

Introduction

FedEx Web Services gives you the tools to build custom platform- and Why should developers be interested in web services?

interface-independent applications that access FedEx features. You can use •Interoperability: Any web service can interact with any other web

FedEx Web Services in a variety of ways to create customized integration service and can be written in any programming language.

solutions for your specific shipping needs. Here are just a few of the ways a •Ubiquity: Web services communicate using HTTP and XML. Any

company can use web services to streamline operations, improve visibility, connected device that supports these technologies can both host and

and provide more choices to clients: access web services.

•Verify Addresses and Improve Customer Satisfaction: Prompt •Low Barrier to Entry: The concepts behind web services are easy to

customers for additional information in the event of an address understand, and developers can quickly create and deploy them using

discrepancy or missing information with the Address Validation WSDL. many toolkits available on the web.

•Give Customers More Options: Help customers learn about all the •Industry Support: Major content providers and vendors support the web

available shipping options and rates with the Ship Service WSDL, services movement.

OpenShip WSDL, and the Rate Services WSDL. You can also extend this

Any application running on any platform can interact with a web service by

service to your shopping cart and website, allowing customers to access

using the Simple Object Access Protocol (SOAP) and Web Services

money-saving information firsthand.

Description Language (WSDL) standards for message transfer and service

•More Convenience: Use the Locator Service WSDL to find the FedEx discovery. By following the standards, applications can seamlessly

pickup location nearest your customer. Or, send an email to your communicate with platform services.

customers with a link to this service as part of your standard order-receipt

process. Document Overview

•Offer Global Shipping Options: Create shipping labels for worldwide

locations. Improve customer service by offering more shipping options to This guide provides instructions for coding the functions you need to develop

customers in more countries with the consolidated Ship Service WSDL. FedEx supported applications. The following chapters make up this guide:

•Reduce Customer Service Costs: Decrease phone traffic from •Introduction (this chapter):

customers checking the status of their shipments and cut customer service –Documentation overview and guidelines, including how to use the Help

costs. FedEx provides online Tracking and Visibility Services that allow you application and how to print this guide.

to provide customers with the status of shipments, Signature Proof of –Overview information about web services, including a high-level

Delivery (SPOD), and Shipment Notification in the Ship Request. description of FedEx Web Services methods.

•Simplify Processes and Improve Satisfaction: In addition to –Coding basics.

ExpressTagAvailability, provide a simple way to allow customers to return

an order with Email Labels. This service sends an email with the address –Overview information about testing and certifying your application.

(URL) of a website where the recipient can log in and print a return label. Each chapter covering FedEx Web Services coding includes:

FedEx Web Services, Rate Services 7

ChapterChapter 11

Introduction

•Service Details: Business rules for using the FedEx service. FedEx Web Services Help opens in your default browser, such as Internet

Explorer or Firefox. The first topic ¾ in this case, the cover page ¾ appears in

•Service Options: Links to additional services that can be added to the the main window. The Table of Contents (TOC) appears in the navigation

basic web service. column. Under the TOC you can choose the Index, Search, or Favorites

•Coding Details: Best practices information, basic request and reply options. Each of these features appears in the same column.

elements, and a link to error messages. The toolbar across the top of the window displays the following elements:

•XML Schema: A link to the layout for the service. This layout provides

Back: Returns you to the previously viewed topic.

coding requirements for all elements in the schema.

Forward: Goes to the next topic as listed in the TOC.

Using FedEx Web Services Online Help

Quick Search: Enter a search term and

This guide is available as online help at the FedEx Developer Resource Center

(fedex.com/developer) in Support >FedEx Web Services Developer click to highlight the term in the current topic. This feature only

Guide.searches the current topic.

Hide Navigation: Hides the left navigation column.

Search: Opens the full search tool in the navigation column.

Print: Opens the Print dialog box.

Home: Opens the default topic: in this case, the cover page.

Add Topic to Favorites: Saves the current topic to your Favorites list.

Printing This Guide or Online Help

You can print all or part of this guide from both the PDF and WebHelp

versions.

Printing from the PDF Version

From the PDF version you can print the complete document or a page range

of the document.

1. Open the PDF file and click the printer icon or click File >Print.

FedEx Web Services, Rate Services 8

ChapterChapter 11

Introduction

2. From the Print dialog box you can print the complete document, specify a XML document that provides information about what the service does, the

page range, or choose from any of the available print options. methods that are available, their parameters, and parameter types. It

describes how to communicate with the service in order to generate a

Printing from the WebHelp Version request to, or decipher a response from, the service.

From the WebHelp version you can print a single topic or a page range of The purpose of a WSDL is to completely describe a web service to a client. A

that topic. WSDL defines where the service is available and what communications

protocol is used to talk to the service. It defines everything required to write

Open WebHelp and click the printer icon . a program to work with an XML web service. A WSDL document describes a

From the Print dialog box you can print the complete topic or specify a page web service using seven major elements. Elements can be abstract or

range. concrete.

Abstract XML elements describe the web service: <types>, <message>,

Web Services, WSDL, and SOAP Overview <operation>, <portType>.

This section describes the standard coding technologies used in FedEx Web Concrete XML elements provide connection details: <service>, <port>,

Services. <binding>.

WSDL Elements

Web Services

Web services are a collection of programming technologies, including XML,

Element Definition

Web Services Description Language (WSDL), and SOAP, which allow you to

build programming solutions for specific messaging and application <definitions> The root element contains name space definitions.

integration. <portType> The most important WSDL element. It is a set of all operations that a web service

can accept and is a container for <operation> elements. This WSDL element

Web services are, by definition, platform independent. FedEx Web Services

describes a web service, the operations that can be performed, and the messages

allow developers to build custom applications that are independent of that are involved, and can be compared to a function library (or a module or a

changes to the FedEx interface. class) in a traditional programming language.

Note: FedEx Web Services are not offered as part of a Universal Description Discovery and <types> Defines variable types used in the web service (both the parameters passed to a

Integration (UDDI) and must be downloaded from the FedEx Developer Resource Center function and the type of the value passed back via the response). The data types

(fedex.com/developer) and stored locally for development and usage. are described by XML schema. This element contains user-defined data types (in

the form of XML schema). The <types> element defines the data types that are

used by the web service For maximum platform neutrality, WSDL uses XML

WSDL schema syntax to define data types.

A SOAP request to, or response from, a service is generated according to the

service’s WSDL definition. A WSDL document describes a service. It is an

FedEx Web Services, Rate Services 9

ChapterChapter 11

Introduction

Element Definition SOAP

<message> Defines the data elements of an operation. Each message can consist of one or SOAP is a simple XML-based protocol that allows applications to exchange

more parts that can be compared to the parameters of a function call in a information over HTTP. SOAP is built on open standards supported by

traditional programming language.

numerous development tools on various platforms. SOAP provides a way to

<operation> Child of the <binding> element that defines each operation that the port exposes. communicate between applications running on different operating systems,

This element allows three messages only:

with different technologies and programming languages. The SOAP request

Message Definition interface is an object in your application programming language.

Input Message Data web servicices receive SOAP enables the data to pass through layers of intermediaries and arrive at

Output Message Data web servicervices send the ultimate receiver the way it was intended. It is worth noting that you may

Fault Message Error messages from web services not need to actually construct the SOAP messages yourself — many

development tools available today construct SOAP behind the scenes.

<service> The <service> element contains a <port> child element that describes the URL

where the service is located. This is the location of the ultimate web service. SOAP Message

<binding> The <binding> element defines the message format and protocol details for each

port. The binding element has two attributes: the name attribute and the type A SOAP message is an ordinary XML document that can be a request for a

attribute. This element specifies how the client and the web service should send web service from a client or a “reply” from a web service to a client.

messages to one another.

•Required <SOAP:Envelope>

Note: For more information about the WSDL standard, refer to the World Wide Web •Optional <SOAP:Header>

Consortium (W3C) Website at w3.org/TR/wsdl. •Required <SOAP:EnvelopeBody>

Example: Rate Request (SOAP Message)

<soapenv:Envelope xmlns:soapenv=”http://schemas.xmlsoap.org/soap/envelope/” xmlns:v8=”http://fedex.com/ws/rate/v8”>

<soapenv:Header/>

Optional <SOAPsoapenv:HeaderBody>

<v8:RateRequest>

<v8:WebAuthenticationDetail>

<v8:CspCredential>

<v8:Key>Provider Key</v8:Key>

<v8:Password>Provider Password</v8:Password>

</v8:CspCredential>

FedEx Web Services, Rate Services 10

ChapterChapter 11

Introduction

<v8:UserCredential>

<v8:Key>User Key</v8:Key>

<v8:Password>User Password</v8:Password>

</v8:UserCredential>

</v8:WebAuthenticationDetail>

<v8:ClientDetail>

<v8:AccountNumber>XXXXXXXXX</v8:AccountNumber>

<v8:MeterNumber>XXXXXX

/v8:MeterNumber>

<v8:ClientProductId>ABCD</v8:ClientProductId>

<v8:ClientProductVersion>1234</v8:ClientProductVersion>

</v8:ClientDetail>

<v8:TransactionDetail>

<v8:CustomerTransactionId>Test v8 Rate Request</v8:CustomerTransactionId>

</v8:TransactionDetail>

<v8:Version>

<v8:ServiceId>crs</v8:ServiceId>

<v8:Major>8</v8:Major>

<v8:Intermediate>0</v8:Intermediate>

<v8:Minor>0</v8:Minor>

</v8:Version>

<v8:ReturnTransitAndCommit>true</v8:ReturnTransitAndCommit>

<v8:RequestedShipment>

<v8:ShipTimestamp>2009-08-19T16:15:00-05:00</v8:ShipTimestamp>

<v8:DropoffType>REGULAR_PICKUP</v8:DropoffType>

<v8:PackagingType>YOUR_PACKAGING</v8:PackagingType>

<v8:Shipper>

<v8:Address>

<v8:StreetLines>123 Maple Street</v8:StreetLines>

<v8:City>Akron</v8:City>

<v8:StateOrProvinceCode>OH</v8:StateOrProvinceCode>

<v8:PostalCode>44333</v8:PostalCode>

<v8:CountryCode>US</v8:CountryCode>

</v8:Address>

</v8:Shipper>

<v8:Recipient>

<v8:Address>

<v8:StreetLines>123 Oak Street</v8:StreetLines>

<v8:City>Collierville</v8:City>

<v8:StateOrProvinceCode>TN</v8:StateOrProvinceCode>

FedEx Web Services, Rate Services 11

ChapterChapter 11

Introduction

<v8:PostalCode>38017</v8:PostalCode>

<v8:CountryCode>US</v8:CountryCode>

</v8:Address>

</v8:Recipient>

<v8:RateRequestTypes>ACCOUNT</v8:RateRequestTypes>

<v8:PackageCount>2</v8:PackageCount>

<v8:PackageDetail>INDIVIDUAL_PACKAGES</v8:PackageDetail>

<v8:RequestedPackages>

<v8:SequenceNumber>1</v8:SequenceNumber>

<v8:InsuredValue>

<v8:Currency>USD</v8:Currency>

<v8:Amount>50.00</v8:Amount>

</v8:InsuredValue>

<v8:Weight>

<v8:Units>LB</v8:Units>

<v8:Value>20.0</v8:Value>

</v8:Weight>

<v8:Dimensions>

<v8:Length>10</v8:Length>

<v8:Width>10</v8:Width>

<v8:Height>10</v8:Height>

<v8:Units>IN</v8:Units>

</v8:Dimensions>

<v8:CustomerReferences>

<v8:CustomerReferenceType>CUSTOMER_REFERENCE</v8:CustomerReferenceType>

<v8:Value>TEST v8 REQUEST</v8:Value>

</v8:CustomerReferences>

</v8:RequestedPackages>

<v8:RequestedPackages>

<v8:SequenceNumber>2</v8:SequenceNumber>

<v8:InsuredValue>

<v8:Currency>USD</v8:Currency>

<v8:Amount>50.00</v8:Amount>

</v8:InsuredValue>

<v8:Weight>

<v8:Units>LB</v8:Units>

<v8:Value>10.0</v8:Value>

</v8:Weight>

<v8:Dimensions>

<v8:Length>5</v8:Length>

<v8:Width>5</v8:Width>

FedEx Web Services, Rate Services 12

ChapterChapter 11

Introduction

<v8:Height>5</v8:Height>

<v8:Units>IN</v8:Units>

</v8:Dimensions>

</v8:RequestedPackages>

</v8:RequestedShipment>

</v8:RateRequest>

Required <SOAP/soapenv:Body>

Required <SOAP/soapenv:BodyEnvelope>

Example: Delete Tag Request (SOAP Message)

<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://fedex.com/ws/ship/v8">

<SOAP-ENV:Body>

<Key>

User Key

</Key>

User Password

</Password>

</UserCredential>

</WebAuthenticationDetail>

<AccountNumber>xxxxxxxxx</AccountNumber>

<MeterNumber>xxxxxx</MeterNumber>

</ClientDetail>

<CustomerTransactionId>DE_Shakeout_wsvc</CustomerTransactionId>

</TransactionDetail>

</Version>

FedEx Web Services, Rate Services 13

ChapterChapter 11

Introduction

<PaymentType>shipper</PaymentType>

<Payor>

<AccountNumber>xxxxxxxxx</AccountNumber>

</Payor>

</Payment>

</DeleteTagRequest>

</SOAP-ENV:Body>

</SOAP-ENV:Envelope>

For more information about the SOAP standard, refer to the World Wide Web Consortium (W3C) Website at http://www.w3.org/TR/SOAP.

Non-SOAP Web Services

FedEx offers a non-SOAP web services solution that you can use to send transactions without having to use tools that provide SOAP protocol support for web

services. This may be convenient for developers using environments that do not provide support for SOAP. With this interface, XML documents are sent directly

to the FedEx servers via the HTTP POST command. FedEx provides a set of specifications and examples to help with the development of this type of

communications method.

To use the non-SOAP web service solution, you must have a working knowledge of HTTPS and Secure Socket Layering (SSL) encryption, the ability to provide a

secure SSL connection to FedEx and the ability to code to an operation interface using XML.

The interfaces used in the SOAP and non-SOAP web services are defined in WSDL files. The WSDL files contain schemas that define the layout of the

operations. The same WSDL file is used for both the SOAP and non-SOAP web service users.

Non-SOAP users are concerned only with the schema definitions and not the other WSDL components that are SOAP-specific. The XML data that is sent via the

non-SOAP interface looks almost identical to the data that is sent via the SOAP interface. The only difference is that the data sent via the non-SOAP interface

does not contain the wrapping Envelope and Body tags that are specific to SOAP. An example of a request using the non-SOAP interface looks like this:

<ns:TrackRequest xmlns:ns="http://fedex.com/ws/track/v5" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xsi:schemaLocation="http://fedex.com/ws/track/v4 TrackService_v4.xsd ">

<ns:WebAuthenticationDetail>

<ns:UserCredential>

<ns:Key>

FedEx Web Services, Rate Services 14

ChapterChapter 11

Introduction

User Key

</ns:Key>

<ns:Password>

User Password

</ns:Password>

</ns:UserCredential>

</ns:WebAuthenticationDetail>

<ns:ClientDetail>

<ns:AccountNumber>000000000</ns:AccountNumber>

<ns:MeterNumber>0000000</ns:MeterNumber>

</ns:ClientDetail>

<ns:TransactionDetail>

<ns:CustomerTransactionId>User Customizable Field</ns:CustomerTransactionId></ns:TransactionDetail>

<ns:Version>

<ns:ServiceId>trck</ns:ServiceId>

<ns:Major>4</ns:Major>

<ns:Intermediate>0</ns:Intermediate>

<ns:Minor>0</ns:Minor>

</ns:Version>

<ns:PackageIdentifier>

<ns:Value>ttttttttttttttt</ns:Value>

<ns:Type>TRACKING_NUMBER_OR_DOORTAG</ns:Type>

</ns:PackageIdentifier>

<ns:IncludeDetailedScans>true</ns:IncludeDetailedScans>

</ns:TrackRequest>

Error Handling

Error handling for non-SOAP operations is different from error handling for SOAP operations. The SOAP specification provides an error handling mechanism that

is not present for non-SOAP operations. For a SOAP operation, a fault is returned as a SOAP exception. For a non-SOAP request, the contents of the SOAP fault

are returned as an XML document. These SOAP fault documents are returned in situations such as schema validation failures or when operation types are

unrecognized. In the following example, a SOAP fault document is returned from a schema validation failure in which the AccountNumber element was

incorrectly sent as the AccountNumberx element:

<soapenv:Fault xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">

<faultcode>soapenv:Server</faultcode>

<faultstring>5: Schema validation failed for request.</faultstring>

FedEx Web Services, Rate Services 15

ChapterChapter 11

Introduction

<con:fault xmlns:con="http://www.bea.com/wli/sb/context">

<con:errorCode>5</con:errorCode>

<con:reason>Schema validation failed for request.</con:reason>

<con:details>

<con1:ValidationFailureDetail xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config">

<con1:message>Expected element 'AccountNumber@http://fedex.com/ws/ship/v8' instead of 'AccountNumberx@http://fedex.com/ws/ship/v8'

here in element ClientDetail@http://fedex.com/ws/ship/v8</con1:message>

<con1:xmlLocation>

<ship:AccountNumberx xmlns:ship="http://fedex.com/ws/ship/v8">000000000</ship:AccountNumberx>

</con1:xmlLocation>

<con1:message>Expected element 'AccountNumber@http://fedex.com/ws/ship/v1' before the end of the content in element

ClientDetail@http://fedex.com/ws/ship/v8</con1:message>

<con1:xmlLocation>

<ship:ClientDetail xmlns:ship="http://fedex.com/ws/ship/8">

<ship:AccountNumberx>000000000000000000</ship:AccountNumberx>

<ship:MeterNumber>0000000</ship:MeterNumber>

</ship:ClientDetail>

</con1:xmlLocation>

</con1:ValidationFailureDetail>

</con:details>

<con:location>

<con:node>Validate</con:node>

<con:pipeline>Validate_request</con:pipeline>

<con:stage>ValidateRequest</con:stage>

<con:path>request-pipeline</con:path>

</con:location>

</con:fault>

</detail>

</soapenv:Fault>

Each reply should be checked for the Fault element to indicate failure in processing the message.

Note: Normal error processing still applies; this is an additional error check for incorrect syntax in XML documents.

Keep in mind that if you use either the SOAP or non-SOAP version of FedEx Web Services, labels are returned as Base64 encoded. To print shipping labels, you

must decode labels before sending them to your printer.

FedEx Web Services, Rate Services 16

ChapterChapter 11

Introduction

Non-SOAP HTTP POST Example Implementing FedEx Web Services

The following HTTPS POST example is a valid working example, but is not Before you begin your implementation of FedEx Web Services, make note of

guaranteed to work for all programming languages, applications, and host the following guidelines:

systems: •FedEx Web Services are designed for use by skilled developers who are

familiar with the communication standards SOAP and Web Services

POST /xml HTTP/1.0 Description Language (WSDL).

Referrer: YourCompanyNameGoesHere

Host: gatewaybetawsbeta.fedex.com •Unlike traditional client/server models, such as a web server or web page

Port: 443 system, web services do not provide the user with a graphical user

Accept: image/gif, image/jpeg, image/pjpeg, text/plain, interface (GUI). Instead, web services share business logic, data, and

text/html, */* processes through a programmatic interface across a network.

Content-Type: image/gif

Content-length: %d •To perform a particular FedEx task such as tracking a package, you need

Your FedEx Transaction to use a class, module, or function that creates your request, sends it to

the FedEx platform, and handles the response.

Each line is followed by one new line character except Content-length and

the FedEx transaction. Two new line characters follow the Content-length •FedEx Web Services are designed to support any operating system and

line. The FedEx transaction has no extra characters. The Content-length line coding language. Downloadable sample code is available in Java, C#, VB,

should have the length of the FedEx transaction in place of the %d variable. .Net and PHP languages from the FedEx Developer Resource Center

Technical Resources.

Note: Port 443 must be opened for bi-directional communication on your firewall.

•Transactions submitted to FedEx using FedEx Web Services are required to

After formatting your non-SOAP transaction and placing it in a HTTP POST have a minimum of 128-bit encryption to complete the request.

request, you will need to open an SSL connection to the FedEx test server

and send the request through FedEx by using your SSL connection. Understanding the XML Schema

Next, parse the HTTPS response to determine if there were any errors.

Examine the HTTP header to determine if any HTTP or Web Server errors The XML schema defines the messages that you can use to access the FedEx

were encountered. If you received a 200 status code, parse the reply to Services. You create a request that contains business data and other

determine if there were any processing problems. instructions and you send it to FedEx. FedEx replies with a response that

contains the data resulting from the instructions you sent in. Notice that

Visual Basic Project Error schema diagrams are conveniently linked to help you find information and

child values.

You may receive an error indicating that an element is not set, even after

setting it in the code. When you set a Boolean type element to true, you may

also need to set the specified element to true.

FedEx Web Services, Rate Services 17

ChapterChapter 11

Introduction

The XML schema provides a means for defining the structure, content, and elements and simple types as belonging to the vocabulary of the XML

semantics of XML documents. schema language, rather than the vocabulary of the schema author.

An XML schema defines: Guide to the XML Schema

•Elements and attributes that can appear in a document The XML schema for each WSDL provides details about the structure,

•Elements that are child elements content, and semantics of the request XML document sent to a FedEx Web

•Order and number of child elements Service and the XML document returned by that FedEx Web Service.

•Whether an element is empty or can include text The top of each service schema includes:

•Data types, default values, and fixed values for elements and attributes •Schema location and schema file name that ends in an ".xsd" suffix.

Some important facts about the XML schema: •Alphabetical listing of complex types for the documented service.

•Elements that contain sub-elements or carry attributes have complex •Alphabetical listing of schema simple types for the documented service.

types. •Input or request data type for the documented service.

•Elements that contain numbers (and strings, and dates, etc.), but do not •Output or reply data type for the documented service.

contain any sub-elements, have simple types. Some elements have The remainder of the service schema contains tables of information about

attributes. Attributes always have simple types. each element, complex type, and simple type.

•Complex types in the instance document, and some of the simple types, Each table consists of some or all of the following sections: diagram,

are defined in the schema associated with a FedEx Web Service. Other namespace, children, type, properties, used by, facets, and source.

simple types are defined as part of XML schema's repertoire of built-in

simple types. XML Schema Diagrams

•XML schema built-in simple types are prefixed by "xs:", which is

XML schema diagrams describe the elements (usually associated with a

associated with the XML schema namespace through the declaration

request or reply), complex types, and simple types that make up the WSDL.

xmlns:xs="http://www.w3.org/2001// XMLSchema", displayed in the

The following table illustrates the relationships and behavior of elements and

schema element.

types.

•The same prefix, and the same association, are also part of the names of

built-in simple types, e.g., xs:string. This association identifies the

FedEx Web Services, Rate Services 18

ChapterChapter 11

Introduction

Schema Diagram Description Schema Diagram Description

Diagrams of a parent A box with a dotted border

element, such as indicates a single element

AddressValidationRequest, that is optional.

include connections to the The type can be simple or

child elements. Child complex.

elements can be simple or

complex types. A layered box represents a

A child element connected multiple occurrence

with a solid line and element. A solid line

surrounded by a box with a represents a required

solid border represents a multiple occurrence

required type, such as element.

ClientDetail. The number of possible

A child element connected occurrences appears below

by a dotted line and the box, as depicted by the

surrounded by a dotted AddressResults element.

border represents an An unbounded number of

optional type occurrences is represented

(minOccurs="0"), such as by the infinity ¥ symbol

TransactionDetail. (maxOccurs="unbounded"),

Note: An element that is as depicted by the

defined as minOccurs="0" Notifications type.

may be required for some A layered box with a dotted

calls.

border represents an

Types that are documented optional multiple occurrence

include the documentation type (minOccurs="0"), such

directly below the box. as ProposedAddressResults.

All children are linked by Note: An element that is

name below the diagram. defined as minOccurs="0"

may be required for some

A box with a single solid calls.

border represents a single

element that is required.

The type can be simple or

complex.

FedEx Web Services, Rate Services 19

ChapterChapter 11

Introduction

Note: Web Services now use two-factor authentication. If you do not have new credentials,

Schema Diagram Description the latest WSDLs will use your old authentication credentials. If you do not have a new user

A standard type such as authentication credential, do not populate the password element.

“string” appears in black

text below element name. ClientDetail: The ClientDetail element is required for all services that need

your FedEx account number and meter number. Requirements are:

A FedEx specific type such

as “Address” appears in

red text below the element Element Description

name. ClientDetail/AccountNumber Required. Your FedEx account number.

ClientDetail/MeterNumber Maximum of 9 characters. The associated meter number for your

Required Elements FedEx account number.

Most requests to FedEx require the following complex elements:

•A standard type such as “string” appears in black text below element

These elements are common to most Web Services (see the following table name.

for which WSDLs need which common elements) and are not documented

•A FedEx specific type such as “Address” appears in red text below the

service by service.

element name.

WebAuthenticationDetail: The WebAuthenticationDetail element includes

Note: When building a Web-based application for shipping that will be used at multiple

user credentials issued by FedEx so that your transactions are recognized by locations, include the local FedEx Express®account and meter in the ClientDetail section

the FedEx back-end systems. The following elements are required: of the ship transaction. Create a database to hold multiple account and meter numbers

for the shipping locations.

Element Description

TransactionDetail: The TransactionDetail element is optional for all

WebAuthenticationDetail The descriptive data to be used in authentication of the shipper's transactions. However, if you want to identify associated request and reply

identity and right to use FedEx Web Services. transactions, use this element.

UserCredential Credential used to authenticate a specific software application. This

value is provided by FedEx after registration. Element Description

WebAuthenticationCredential Two-part authentication string used to verify shipper identity. TransactionDetail/ Maximum of 40 characters. This element allows you to assign a

WebAuthenticationCredential/ Unique identifier assigned to each customer as part of their CustomerTransactionId unique identifier to your transaction. This element is returned in the

Key authentication credentials. reply and helps you match requests to replies.

WebAuthenticationCredential/ Second part of the authentication credential which has a direct

Password relationship with the credential key. VersionId: The VersionId element is required and uploads the WSDL version

number to FedEx. FedEx provides the latest version number for the service you

are using. This number should be updated when you implement a new version

of the service.

FedEx Web Services, Rate Services 20

ChapterChapter 11

Introduction

Element Description Element Description

ServiceId Identifies a system or sub-system which performs an operation. Residential Required if your shipper address is considered a residential location. If you are

unsure, use the Address Validation Service to check your address.

Major Identifies the service business level.

Intermediate Identifies the service interface level. Reply Notifications

Minor Identifies the service code level. Notifications are returned in replies. The notification element provides the

notification ranked according to their severity:

Shipper Information: Your shipper information is required for all shipping •HighestSeverity: This element ranks the level of notification severity.

transactions: Values include:

Element Description •FAILURE: Code/message explains that your request could not be handled

AccountNumber If you include this element in the ship request, this entry overrides the account at this time; do not resubmit right now.

number in the ClientDetail element. •ERROR: Code/message identifies a problem with your request data; you

TIN Tax Identification Number — this information is required for international may fix the request data and try again.

shipments only.

•WARNING: Your request was successful. However, the code/message

Contact The Contact element includes: explains what had to be done to fulfill your request; you may need to

• PersonName determine whether that is what you intended, you may need to do this

• Title differently next time, or you may need to prepare for a future change.

• CompanyName Request was completed.

• Department

• PhoneNumber •NOTE: Your request was successful. However, the code/message contains

• PagerNumber additional information about how your request was fulfilled; you do not

• FaxNumber need to take any special action.

• EmailAddress •SUCCESS: Your request was successful. There are no NOTE or WARNING

Address This element includes: notifications.

• StreetLines: two StreetLines elements are allowed. Note: There is a possibility of multiple Notification objects (different severity levels) for a

• City single request. The response notification severity values of ERROR, FAILURE, and SUCCESS

• StateOrProvinceCode: required if your shipper address is in the U.S. or severity should never be combined in a single response.

Canada.

• PostalCode: required. Notification Examples

• UrbanizationCode: may be required if your shipper address is in Puerto Rico.

For example, if you need to perform a U.S. address correction, the service

• CountryCode: required.

should accept a (U.S.) Address object from its client and return that Address

FedEx Web Services, Rate Services 21

ChapterChapter 11

Introduction

Case Reply

in a standardized form (canonical spelling and abbreviation of street name

parts, elimination of redundant white space, data correction where possible, and street address. The service rejects the

client's address.

etc.). The following cases illustrate several notification types.

Request to submit an Address that contains only Notifications: {ERROR, "City name is missing and

The example service has been assigned a NotificationSourceType value of a single street line (no city, state, or postal code). cannot be corrected"}, {ERROR, "State code is

"USACS". The service rejects the request. missing and cannot be corrected"}, {ERROR, "ZIP

code is missing and cannot be corrected"} and

Case Reply Address: empty (either all fields blank or no

Address at all)

Request to submit an Address that is valid and is Notifications: SUCCESS and Address: the original

already in standardized form (i.e., there is nothing address (or copy). Request to submit an Address, but the address Notifications: {FAILURE, "Service temporarily

to say except "OK"). correction service's database server is down or unavailable"}, Address: empty (either all fields

fails. blank or no Address at all).

Request to submit an Address that is valid but Notifications: NOTE, "Standard abbreviation

not in standardized form (e.g., the word applied to street name"}, {NOTE, "Standard

"Boulevard" in a street name is replaced with the abbreviation applied to city name"} and Address:

standard abbreviation "Blvd" and "Saint Louis" as the original address, with modification made to Implementation Process

a city name is replaced with "St Louis"). the street name and city name. Planning your integration and organizing your application data to address your

Request to submit an Address that is valid but Notifications: NOTE, "ZIP+4 suffix added"} and shipping needs can sometimes take more time than the actual implementation

with only a 5-digit postal code: the service Address: the original address, with the four-digit of the integration. FedEx Web Services conform to industry standards and are

supplies the ZIP+4 for the standardized address. suffix added to the postal code.

compatible with a comprehensive array of developers’ tools. This ensures the

Request to submit an Address that is identifiable Notifications: WARNING, "ZIP code corrected to fastest time-to-market with maximum flexibility to integrate FedEx

by street data, city name, and state code, but match rest of address"} and Address: the original transactions and information into your applications. FedEx WSDLs are fully

with a 5-digit postal code that does not match address, with the replacement postal code.

the other fields. The service supplies the correct interoperable with any product or developer’s tool that also conforms to the

ZIP+4 for the standardized address. WS-I Basic Profile. For details, see http://www.ws-i.org/Profiles/BasicProfile-

Request to submit an Address that has an Notifications: WARNING, "State code corrected to 1.1-2004-08-24.html.

incorrect state code. The original address match city and ZIP code"} and Address: the To obtain FedEx Web Services and begin integrating with an application, you

contains a ZIP+4 postal code belonging to a city/ original address, with the revised state code.

state pair that matches the client's original city will need to access documentation, sample code, and sample service requests

and street address. The service supplies the and replies with the WSDLs from the FedEx Developer Resource Center

corresponding state code in the corrected Technical Resources. You will also need to obtain a test meter number to

address. engage in real-time online testing in the FedEx hosted test environment.

Request to submit an Address that has an Notifications: ERROR, "State code is incorrect for

Note: Not all services are available outside the U.S.

incorrect state code. The original address city/ZIP combination"} and Address: empty (either

contains a ZIP+4 postal code belonging to a city/ all fields blank or no Address at all).

state pair that matches the client's original city

FedEx Web Services, Rate Services 22

ChapterChapter 11

Introduction

Requirements for Corporate and Non-Commercial Developers

Testing

There are some differences in how support is provided and in the approvals

FedEx supplies a complete online operating environment with which to test required to go into production that depend on whether you are creating an

your applications against live FedEx servers. In order to execute test application for use by your own company or you are planning to resell your

interactions, you must first include a test account number, test meter number, solution to others.

authentication key, and password in your code. These credentials are provided

to registered developers. Requirements and Resources for Corporate Developers

Corporate developers are typically part of a dedicated development team at a

Certification single company. This category also includes third-party developers

Certification is the process of ensuring that your implementation meets a (consultants) hired by the company to work on its behalf. In all cases, the

number of requirements for safe, secure, and effective operation of your integration will be used by the company itself and will not be resold or

solution in the FedEx production environment. Certification requirements differ distributed outside of its own footprint. In this situation, FedEx can support

based on whether you are a corporate or commercial developer, and whether the customer directly.

you are implementing using the advanced or standard services.

Requirements and Resources for Corporate Developers

Go to Production Must be accepted into the FedEx®Compatible Solutions Program (CSP) No

Once an application has passed certification, the developer must replace the Self-certification of implementations using standard services Yes

test credentials with the production credentials issued by FedEx. The Self-certification of implementations using advanced services No

application connection is then directed to the production servers, and the Certification assistance Yes (WISC team)

application is live.

FedEx supports the customer directly Yes

Once an application has completed the above mentioned process and

requirements, FedEx will enable the provider’s CSP credentials for processing Preproduction Assistance

all applicable services in the production environment. The URL needed to

direct the CSP application to the FedEx production servers will also be Preproduction assistance is available via the FedEx Web Integrated Solutions

provided. The provider would then need to obtain production User Credentials Consultation (WISC) team. If you are in the preproduction stages of

(Register CSP User Service) and a production meter number (Subscribe implementing a FedEx web integrated solution and would like to speak with a

Service). Once this information has been obtained with the connection FedEx integration consultant who can assist you in understanding FedEx Web

directed to the production servers, the provider’s application is considered Services, contact your FedEx sales executive or technical support at

live. 1.877.339.2774 Monday through Friday, 7 a.m. to 9 p.m. (CST), and Saturday 9

a.m. to 3 p.m. (CST). Both your FedEx sales executive and technical support

can request a WISC team member to contact you within 3 business days.

FedEx Web Services, Rate Services 23

ChapterChapter 11

Introduction

Requirements and Resources for Commercial Developers

Corporate developers may find that solutions to their needs have already

been implemented by a software vendor that is part of the FedEx®FedEx supports the customer directly No

Compatible Solutions Program. If improved time-to-market, cost containment, FedEx supports the commercial developer’s customer Indirectly

or specialized knowledge is needed, corporate development planners may

want to review the available third-party solutions. To see a list of the If you are a commercial developer interested in becoming a FedEx Compatible

solutions provided by the CSP providers, go to the Available CSP Solutions Solutions Provider, go to fedex.com/us/compatiblesolutions/provider/for

page: fedex.com/us/compatiblesolutions/.more information about the FedEx Compatible Solutions Program (CSP).

Requirements for Consultants URL Errors

Consultants developing on behalf of a corporate customer must ensure that If a VB.NET or C# project still sends transactions to the test server after

their client provides their account information and a signed End User License changing the URL in the WSDLs to print to production, perform the following:

Agreement to FedEx in order to obtain a production test meter. •Make sure permissions are already activated in the production

Requirements and Resources for Commercial Developers environment.

Commercial developers create solutions with the intent of distributing and/or •Copy the WSDL files to a different folder.

reselling them to their customers. Because they are deployed in a variety of •Follow the directions on changing the new WSDL files to point to

situations, commercial integrations generally require a higher order of “fit and production as described in the FedEx Developer Resource Center in the

finish.” Commercial developers are responsible for supporting their products “Move to Production” topic.

for their customers. FedEx has a dedicated team of professionals to help •Remove existing web services references from your project that point to

developers commercialize their products and to coordinate the three-way old WSDLs containing the URLs to the test environment.

interplay between the developer, the end customer, and FedEx.

•Create new web references that point to the modified WSDLs. Use the

same names as the old references.

Requirements and Resources for Commercial Developers •Compile and test the project. Your new production credentials should work

Must be accepted into the FedEx Compatible Solutions Program (CSP) Yes (Required) for standard web services, such as rating or tracking without extra

Self-certification of implementation using standard services No permissions. Advanced web services require permissions to be active

before they will work. Old test key values will now return an error

Self-certification of implementations using advanced services No

message.

Certification Assistance Yes (via CSP)

FedEx Web Services, Rate Services 24

2 Rate Services

Error Messages

Rate

Rate Available Services/Rate Shopping

Surcharges and Discounts

XML Schema

ChapterChapter 22

Rate Services

Use the RateService WSDL to request pre-ship rating information and to •The Rate Available Services operation returns the rate for the origin and

determine estimated or courtesy billing quotes. Time in Transit can be destination for the requested service.

returned with the rates if it is specified in the request. Depending on how a Note: Only valid services are returned.

rate request is structured, the reply will return in different structures. These •Rate and Rate Available Services for FedEx Express shipments support

structures have two different names. intra-Mexico shipping.

•Rating is available for FedEx SmartPost®Shipping.See FedEx SmartPost

Rate Request Elements for more details.

RateRequest provides a rate response on a single service. •This quote is an estimate and may differ from the actual invoiced amount.

Note: A rate request does not return route or service availability. All rate quotes are •Rate shopping, service-specific commitment and rate information may also

estimates only and may differ from the actual invoiced amount. be specified.

For more detailed information about the services offered by FedEx, see the

Rate Available Services/Rate Shopping electronic FedEx Service Guide.

A Rate Available Services request will provide a list of available services

from one request. Rates are returned for each service on the list. Rate Coding Details

Note: A Rate Available Services request does not return route information, but does check When requesting a rate quote:

service availability and returns only those services that are actually available.

•Include as much detail as possible about your shipment. The RateService

WSDL provides elements to identify your shipment, including shipping

Rate Service Details

option elements. This information is important for calculating the correct

The Rate and Rate Available Services operations provide a shipping rate shipping costs with surcharges.

quote for a specific service combination depending on the origin and

•Use the optional RateRequestTypes element to have list rates returned

destination information supplied in the request. The following details apply:

with discount rates. If you choose LIST as the element value, you receive

•Discount rates are available for all services and origin/destination pairs. both discount and list rates, in addition to automation rate quotes.

•Time in transit may be returned with the rates if it is specified in the •For Rate (a single service), specify the service to ensure rate data for the

request. service and shipment data input is returned. For Rate Available Services

•The Rate operation returns the rate for the origin and destination by (multiple services returned), do not include the ServiceType. The system

requested service. You will not receive service checking to validate will then return a list of services.

whether that service is actually available for your ship date and origin/ •For Rate, specify the carrier by using CarrierCode. For Rate Available

destination pair. Services, specify the carrier to ensure rate data for all services for the

FedEx Web Services, Rate Services 26

ChapterChapter 22

Rate Services

carrier and the shipment data combination are returned, or do not specify and date the package will be delivered, based on the ship date you

a CarrierCode to receive all available services from all carriers in the specified. The FedEx Ground®response will describe the number of

return. business days required for the package delivery.

•Use the optional ReturnTransitAndCommit element to include transit time

information in the reply. FedEx Express information will include the day

RateRequest Elements

Element Required Description

RateRequest/ReturnTransitAndCommit Optional Allows the caller to specify that the transit time and commit data are to be returned in the reply.

RateRequest/CarrierCodesCarrierCodeType Optional Candidate carriers for rate-shopping. This field is only considered if RequestedShipment/ServiceType is omitted.

RateRequest/VariableOptionsServiceOptionType Optional Contain zero or more service options whose combinations are to be considered when replying with available

services.

Specify if Saturday delivery is required. Valid value is SATURDAY_DELIVERY.

Note: If you specify SATURDAY_DELIVERY for VariableOptions, you will get both Saturday Delivery options and

regular options for all services where Saturday delivery is an option. Do not specify SATURDAY_DELIVERY for

SpecialServices or it will only return any applicable Saturday Delivery options.

RateRequest/RequestedShipment Required The shipment for which a rate quote (or rate-shopping comparison) is desired.

RequestedShipment/ShipTimestamp Optional The date format must be YYYY-MM-DDTHH:MM:SS-xx:xx. The time must be in the format: HH:MM:SS using a 24-

hour clock. The date and time are separated by the letter T (e.g., 2009-06-26T17:00:00). The UTC offset indicates

the number of hours/minutes (e.g., xx:xx) from UTC (e.g., 2009-06-26T17:00:00-04:00 is defined as June 26, 2009

5:00 p.m. Eastern Time).

RequestedShipment/DropoffType Optional Identifies the method by which the package is to be tendered to FedEx. This element does not dispatch a courier

for package pickup.

RequestedShipment/ServiceType Optional Identifies the FedEx service to use in shipping the package for a rate request.

RequestedShipment/PackagingType Required Identifies the packaging used by the requestor for the package. See PackagingType for list of valid enumerated

values.

RequestedShipment/TotalWeight Optional Identifies the total weight of the shipment being conveyed to FedEx. This is only applicable to International

shipments and should be used on the first package of a multiple piece shipment. This value contains 1 explicit

decimal position.

FedEx Web Services, Rate Services 27

ChapterChapter 22

Rate Services

Element Required Description

RequestedShipment/TotalInsuredValue Optional Total insured amount.

RequestedShipment/PreferredCurrency Optional Indicates the currency the caller requests to have used in all returned monetary values (when a choice is possible).

RequestedShipment/Shipper Required The descriptive data for the physical location from which the shipment originates.

RequestedShipment/Recipient Required The descriptive data for the physical location to which the shipment is destined.

RequestedShipment/RecipientLocationNumber Optional A unique identifier for a recipient location.

RequestedShipment/Origin Optional Physical starting address for the shipment, if different from shipper’s address.

RequestedShipment/ShippingChargesPayment Optional Descriptive data indicating the method and means of payment to FedEx for providing shipping services.

SpecialServicesRequested Optional Identifies the collection of special services requested by the shipper and offered by FedEx. If the shipper requests a

special service requiring additional data (such as C.O.D.), the special service type must be present in the

SpecialServiceTypes collection, and the supporting detail must be provided in the appropriate sub-object (such as

CodDetail). Valid values are:

• ALCOHOL

• BROKER_SELECT_OPTION

• CALL_BEFORE_DELIVERY

• COD

• CUSTOM_DELIVERY_WINDOW

• DANGEROUS_GOODS

• DO_NOT_BREAK_DOWN_PALLETS

• DO_NOT_STACK_PALLETS

• DRY_ICE

• EAST_COAST_SPECIAL

• ELECTRONIC_TRADE_DOCUMENTS

• EMAIL_NOTIFICATION

• EXHIBITION_DELIVERY

• EXHIBITION_PICKUP

• EXTREME_LENGTH

• FLATBED_TRAILER

• FOOD

• FREIGHT_GUARANTEE

• FUTURE_DAY_SHIPMENT

FedEx Web Services, Rate Services 28

ChapterChapter 22

Rate Services

Element Required Description

• HOLD_AT_LOCATION

• HOME_DELIVERY_PREMIUM

• INSIDE_DELIVERY

• INSIDE_PICKUP

• LIFTGATE_DELIVERY

• LIFTGATE_PICKUP

• LIMITED_ACCESS_DELIVERY

• LIMITED_ACCESS_PICKUP

• PENDING_SHIPMENT

• POISON

• PRE_DELIVERY_NOTIFICATION

• PROTECTION_FROM_FREEZING

• REGIONAL_MALL_DELIVERY

• REGIONAL_MALL_PICKUP

• RETURN_SHIPMENT

• SATURDAY_DELIVERY

• SATURDAY_PICKUP

• TOP_LOAD

RequestedShipment/ExpressFreightDetail Optional Details specific to an Express freight shipment.

RequestedShipment/FreightShipmentDetail Optional Data applicable to shipments using FEDEX_FREIGHT_PRIORITY and FEDEX_FREIGHT_ECONOMY services.

RequestedShipment/DeliveryInstructions Optional Used with Ground Home Delivery and Freight.

RequestedShipment/VariableHandlingChargeDetail Optional Details about how to calculate variable handling charges at the shipment level.

Requested shipment/CustomsClearanceDetail Optional Information about this package that only applies to an international (export) shipment.

CustomClearanceDetail/DutiesPayment Optional Descriptive data indicating the method and means of payment to FedEx for providing shipping services.

CustomsClearanceDetail/Commodities/CustomsValue Optional Used to calculate Argentina and Dominican Republic export taxes.

RequestedShipment/PickupDetail Optional For use in “process tag” transaction.

PickupDetail/ReadyDateTime Optional Specify the time and date the package will be ready for pickup.

PickupDetail/LatestPickupDateTime Optional Specify the last possible pickup time and date.

PickupDetail/CourierInstructions Optional Specify any courier instructions.

FedEx Web Services, Rate Services 29

ChapterChapter 22

Rate Services

Element Required Description

PickupDetail/RequestType Optional Specify the request type.

PickupDetail/RequestSource Optional Specify the request source.

RequestedShipment/SmartPostDetail Optional Details specific to FedEx SmartPost shipments.

RequestedShipment/BlockInsightVisibility Optional If true, only the shipper/payor will have visibility of this shipment.

RequestedShipment/LabelSpecification Required Details about the image format and printer type for the returned label.

Requested shipment/ShippingDocument Specification Optional Details such as the label, shipping document types, NAFTA information, CI information, and GAA information.

Requested shipment/RateRequestType Optional Indicates the type of rates to be returned. Valid values are:

• ACCOUNT

• LIST

• MULTIWEIGHT

Note: RateRequest automatically returns discount rates. If you include the LIST option, the RateRequest returns

both list and discount rates.

RequestedShipment/CustomerSelectedActualRateType Optional Specifies the type of rate the customer wants to have used as the actual rate type.

RequestedShipment/EditRequestType Optional Specifies whether the customer wishes to have Estimated Duties and Taxes provided with the rate quotation on

this shipment. Only applies with shipments moving under international services.

RequestedShipment/PackageCount Optional The total number of packages in the entire shipment. The maximum number of packages in one rate request is 200.

RequestedShipment/RequestedPackageLineItems Optional One or more package-attribute descriptions, each of which describes an individual package, a group of identical

packages, or (for the total-piece-total-weight case) common characteristics of packages in the shipment.

RateReply Elements

Rating for Multiple-Package Shipment (MPS)

This option is available for FedEx Express U.S. and international multiple-

Element Required Description

package shipments, FedEx Ground U.S. and international multiple-package

shipments, FedEx Express U.S. C.O.D. and international C.O.D. multiple- HighestSeverity Required This indicates the highest level of severity of all the

notifications returned in the reply.

package shipments, and FedEx Ground U.S. C.O.D. and international C.O.D.

multiple-package shipments. Notifications Required The descriptive data regarding the results of the

submitted transaction.

The maximum number of packages in one rate request is 200.

FedEx Web Services, Rate Services 30

ChapterChapter 22

Rate Services

Element Required Description Surcharge Description Applicable Services

FedEx Ground, FedEx

TransactionDetail Optional Contains the CustomerTransactionID that was sent to

International Ground

the request.

Additional Handling For FedEx Express, shipment is not fully encased FedEx Priority Overnight,

TransactionDetail/ Optional Free form text to be echoed back in the reply. Used to

Packaging Surcharge in an outer shipping container and/or is encased FedEx Standard

CustomerTransactionId match requests and replies.

in packing material other than corrugated Overnight, FedEx 2Day,

TransactionDetail/Localization Optional Governs data payload language/translations cardboard. FedEx Express Saver,

(contrasted with ClientDetail.localization, which FedEx Ground, FedEx

For FedEx Ground, shipment is not fully encased

governs Notification.localizedMessage language International Ground

in an outer shipping container and/or is encased

selection). in packing material other than corrugated

Version Required The version of this reply. cardboard.

RateReplyDetails Optional Each element contains all rate data for a single Broker Select Option A fee applies to B13A for Canada Export Shipping FedEx International

service. If service was specified in the request, there shipment if you choose to have FedEx complete Priority®, FedEx

will be a single entry in this array; if service was the delivery after customs clearance and if your International Priority®

omitted in the request, there will be a separate entry recipient and customs broker are served by Freight, FedEx

in this array for each service being compared. different FedEx clearance points. International Economy®,

FedEx International

Economy®Freight

Surcharges and Discounts Courier Pickup Charge A charge applies when you request a pickup. This

charge does not apply if you drop off your

Your shipment may incur fees in addition to the base shipping rate depending package at a FedEx shipping location or if you

on the service options you choose. The following are descriptions of those have regular scheduled pickups.

fees that are returned in the rate quote. Dangerous Goods FedEx assesses a surcharge on each package FedEx Express, FedEx

containing dangerous-goods materials. For intra- Priority Overnight, FedEx

Surcharge Description Applicable Services Canada shipments this surcharge is also based on First Overnight®, FedEx

the type of service provided. First Overnight®Freight,

Additional Handling For FedEx Express, shipment measures greater FedEx Priority Overnight®,FedEx 2Day, FedEx

Dimension Surcharge than 60" in length but equal to or less than 108" FedEx Standard 2Day®A.M., FedEx

in length. Overnight®, FedEx 2Day®,International Economy

FedEx Express Saver®,

For FedEx Ground, shipment measures greater and FedEx International

FedEx Ground®, FedEx

than 60" in length but equal to or less than 108" Economy Freight

International Ground®

Declared Value FedEx liability for each package is limited to FedEx Express and FedEx

Additional Handling For FedEx Ground or FedEx Express, shipment has FedEx Priority Overnight, $100USD unless a higher value is declared and Ground shipments

Weight Surcharge an actual weight of greater than 70 lbs. FedEx Standard paid for. For each package exceeding $100USD in

Overnight, FedEx 2Day, declared value, an additional amount is charged.

FedEx Express Saver, FedEx does not provide insurance of any kind.

FedEx Web Services, Rate Services 31

ChapterChapter 22

Rate Services

Surcharge Description Applicable Services Surcharge Description Applicable Services

Delivery Area A delivery area surcharge applies to shipments FedEx Priority Overnight, FedEx Ground®A charge applies when you direct FedEx to collect FedEx Ground shipments

Surcharge destined for select U.S. postal codes. (This FedEx Standard Electronic C.O.D. payment from your recipient and deposit it

surcharge does not apply to FedEx Ground Overnight, FedEx 2Day, (E.C.O.D.) directly into your bank account.

Multiweight®shipments.) In addition, a delivery FedEx Express Saver, FedEx®Delivery FedEx provides five options when you need a FedEx Express shipments

area surcharge applies to FedEx Express FedEx Ground, FedEx Signature Options signature upon delivery: Indirect Signature to U.S. addresses and

shipments destined for areas in Alaska that are Home Delivery®

Required, Direct Signature Required, Adult FedEx Ground shipments

remote, sparsely populated, or geographically Signature Required, Service Default and No to U.S. and Canadian

difficult to access. Signature Required. Indirect Signature Required is addresses

Dimensional Weight For FedEx Express shipments: FedEx may assess FedEx Express and FedEx allowed to U.S. residential addresses only. Direct

shipping charges based on the International Air Ground shipments Signature Required is allowed to U.S. addresses

Transport Association (IATA) volume standard. and when shipping via FedEx Ground to Canadian

Dimensional weight is calculated by multiplying addresses. Adult Signature Required is allowed to

the length by width by height of each package in U.S. addresses. Service Default tells the courier

inches and dividing the total by 194 (for to perform the customer’s usual request for

shipments within the U.S. and shipments signature collection.

between the U.S. and Puerto Rico) or 186 (for FedEx Email Return A charge applies in addition to shipping charges FedEx First Overnight,

international shipments). If the dimensional Label once the recipient uses the return label. This FedEx Priority Overnight,

weight exceeds the actual weight, charges may service is only available for U.S. shipments. FedEx Standard

be assessed based on the dimensional weight. Overnight, FedEx 2Day,

Shipments in FedEx packaging may also be FedEx 2Day A.M., FedEx

subject to dimensional-weight pricing. Ground, FedEx 2Day®

For FedEx Ground shipments: Dimensional weight Freight, FedEx 3Day®

may apply to FedEx Ground packages that are 3 Freight

cubic feet (5,184 cubic inches) or larger. Multiply

FedEx ExpressTag®A charge applies in addition to shipping charges FedEx Priority Overnight,

the length by width by height of each package in

when FedEx picks up the package for return at FedEx Standard

inches. If the total is 5,184 inches or greater,

your recipient’s location. This service is only Overnight, FedEx 2Day

calculate dimensional weight by dividing by 194

available for U.S. shipments.

(for shipments within the U.S. and Puerto Rico)

and 166 (for shipments to Canada). FedEx Ground®FedEx may provide pickup service to an address FedEx Ground (U.S. and

Alternate Address other than the shipping location associated with Canada)

Duties and Taxes Duties and taxes, including goods and services FedEx Express

Pickup the FedEx Ground account number.

tax (GST) and value-added tax (VAT) may be International package and

assessed on the contents of the shipment. freight service FedEx Ground®Call A charge applies in addition to shipping charges FedEx Ground, FedEx

Tag when FedEx picks up the packages for return at Home Delivery

FedEx®Collect on If you request FedEx to obtain payment from the FedEx Express and FedEx

your recipient’s location. This service is only

Delivery (C.O.D.) recipient at the time the shipment is delivered, Ground shipments

available for U.S. shipments.

an additional surcharge is applied.

FedEx Web Services, Rate Services 32

ChapterChapter 22

Rate Services

Surcharge Description Applicable Services Surcharge Description Applicable Services

FedEx Home Delivery: The shipping charge for any

FedEx Home Delivery You can choose FedEx Home Delivery convenient FedEx Home Delivery

package with a dimensional weight of greater

Convenient Delivery delivery options: 1) FedEx Date Certain Home

than 70 lbs. is the same as a FedEx Ground

Options Delivery®, 2) FedEx Evening Home Delivery®, 3)

package of the corresponding dimensional weight

FedEx Appointment Home Delivery®.

being shipped under the same circumstances.

FedEx International A charge applies when you select FICE for FedEx International

Residential Surcharge A residential package surcharge applies to FedEx Express, FedEx

Controlled Export shipments moving under a U.S. State Department Priority, FedEx

shipments to a home or private residence, Ground, FedEx

(FICE) (DSP) license or under U.S. Drug Enforcement International Priority

including locations where a business is operated International Ground

Administration permits 36, 236, and 486. This Freight

from a home. (Canada only), FedEx

charge also applies for inbound shipments moving

International Premium®

under a transportation and exportation customs

form (CF7512) from a foreign trade zone or Rural Delivery (Alaska A surcharge applies for delivery to select rural FedEx Ground U.S.

bonded warehouse. and Hawaii) postal codes in Alaska and Hawaii.

FedEx®Print Return A charge applies in addition to shipping charges FedEx First Overnight, Saturday Delivery/ Saturday Service is available for an additional FedEx Priority Overnight,

Label once the recipient has used the return label. This FedEx Priority Overnight, Saturday Pickup charge depending on the package service type FedEx First Overnight

service is only available for U.S. shipments. FedEx Standard and origin/destination pair. Freight, FedEx 2Day,

Overnight, FedEx 2Day, FedEx 2Day A.M., FedEx

FedEx 2Day A.M., FedEx International Priority,

Ground, FedEx 2Day FedEx 1Day®Freight,

Freight, FedEx 3Day FedEx 2Day Freight

Freight

Dry Ice Surcharge A surcharge will be applied for dry-ice packaging. FedEx International

Oversize Charge FedEx Express: The maximum limits for FedEx FedEx Ground and FedEx Priority, FedEx

Express U.S. packages are 150 lbs. and 119" in Home Delivery International Economy,

length and 165" in length and girth (L+2W+2H). and FedEx International

Packages that weigh 150 lbs. or less and exceed Economy Freight services

108" in length or 130" in length and girth are

Fuel Surcharge The fuel surcharge percentage for FedEx Express FedEx Express, FedEx

considered “oversize” packages. Oversize

services is subject to monthly adjustment based Ground, and FedEx Home

packages are rated based on the greater of the

on a rounded average of the U.S. Gulf Coast Delivery

package’s actual rounded weight or dimensional

(USGC) spot price for a gallon of kerosene-type

weight.

jet fuel.

FedEx Ground: A package weighing 150 lbs. or

The fuel surcharge percentage for FedEx Ground

less and measuring greater than 130" in length

services is subject to monthly adjustment based

and girth is classified as an oversize package.

on a rounded average of the national U.S. on-

The shipping charges for an oversize package are

highway average price for a gallon of diesel fuel.

based on the greater of the package’s actual

rounded weight or its dimensional weight.

FedEx Web Services, Rate Services 33

ChapterChapter 22

Rate Services

Note: For more information about FedEx terms and conditions, including surcharges, go to Discount Program Description

fedex.com/us/services/terms/.characteristics. Earned discounts are also available for FedEx SmartPost

shipping.

FedEx Discount Programs

Note: For more information on pricing programs, contact your FedEx account executive.

The following discount programs are offered by FedEx and are calculated in

your rate quote:

XML Schema

Discount Program Description See Schema RateService.

FedEx Ground FedEx Ground Multiweight is ideal for multiple-package shipments moving

Multiweight as one unit to the same destination on the same day. This pricing option

allows you to combine packages for a multiweight rate. Pricing is based on Error Messages

the combined weight of your packages. For more information about FedEx

Ground Multiweight requirements, go to fedex.com/us/services/options/ For error messages, see the “Appendix O: Error Code Messages” topic of the

multipiece/groundmultiweight.html.Web Services Developer Guide in the Support area of the Developer Resource

Note: To help calculate multiweight discounts, you can download the FedEx Center at fedex.com/developer.

Ground Multiweight utility at fedex.com/us/solutions/multiweight.

Earned Discounts The Earned Discounts Pricing Program awards discounts when you meet

Pricing Program predetermined revenue levels and/or shipping criteria. You earn additional

discounts as you increase shipping activity or due to specific shipment

FedEx Web Services, Rate Services 34

Index

certification 2323

C P W

document overview 77

certifying Web Services 2323 printing this document 88 Web Services 99

online help 88 online help 99 certification 2323

printing 88 pdf 88 implementing 1717

Dgo to production 2323 implementing process 2222

discounts 3131 implementation process 2222 overview 99

programs 3434 implementation testing 2323 Non-SOAP 1414

document services

implementing Web Services 1717 production 2323

overview 77 surcharges and discounts 3131

understanding XML schema 1717 surcharges and discounts 3131

online help 88 programs 3434

Web Services, WSDL, and SOAP programs 3434

printing 88 SOAP

overview 99 testing 2323

Web Services, WSDL, and overview 1010 XML schema 1717

SOAP 99 surcharges 3131

NWSDL

non-SOAP Web Services 1414 overview 99

I T

implementing Web Services 1717 testing Web Services 2323

certification 2323 online help 88 XML schema 1717

process 2222 U

overview 77

production 2323 understanding XML schema 1717

online help 88

testing 2323 printing 88

introduction Web Services, WSDL, and SOAP 99

FedEx Web Services, Rate Services 35

Schema

RateService_v10.xsd

targetNamespace:

http://fedex.com/ws/rate/v10

Elements Complex types Simple types

RateReply

AdditionalLabelsDetail

AdditionalLabelsType

RateRequest

Address

B13AFilingOptionType

CertificateOfOriginDetail

BarcodeSymbologyType

ClientDetail

CarrierCodeType

CodAddTransportationChargesDetail

ChargeBasisLevelType

CodDetail

ClearanceBrokerageType

CommercialInvoice

CodAddTransportationChargeBasisType

CommercialInvoiceDetail

CodCollectionType

CommitDetail

CodReturnReferenceIndicatorType

Commodity

CommitmentDelayType

ConfigurableLabelReferenceEntry

CustomDeliveryWindowType

Contact

CustomerImageUsageType

ContactAndAddress

CustomerReferenceType

ContentRecord

CustomLabelCoordinateUnits

CurrencyExchangeRate

DangerousGoodsAccessibilityType

CustomDeliveryWindowDetail

DayOfWeekType

CustomDocumentDetail

DelayLevelType

CustomerImageUsage

DelayPointType

CustomerReference

DestinationControlStatementType

CustomerSpecifiedLabelDetail

DistanceUnits

CustomLabelBarcodeEntry

DocTabContentType

CustomLabelBoxEntry

DocTabZoneJustificationType

CustomLabelDetail

DropoffType

CustomLabelGraphicEntry

EdtRequestType

CustomLabelPosition

EdtTaxType

CustomLabelTextEntry

EMailNotificationEventType

CustomsClearanceDetail

EMailNotificationFormatType

DangerousGoodsDetail

EMailNotificationRecipientType

DateRange

ExpressRegionCode

DelayDetail

FedExLocationType

DestinationControlDetail

FlatbedTrailerOption

Dimensions

FreightAccountPaymentType

Distance

FreightBaseChargeCalculationType

DocTabContent

FreightChargeBasisType

DocTabContentBarcoded

FreightClassType

DocTabContentZone001

FreightGuaranteeType

DocTabZoneSpecification

FreightOnValueType

FedEx Web Services, Rate Services 36

EdtCommodityTax

FreightServiceSchedulingType

EdtExciseCondition

FreightShipmentRoleType

EdtTaxDetail

HazardousCommodityLabelTextOptionType

EMailLabelDetail

HazardousCommodityOptionType

EMailNotificationDetail

HazardousCommodityPackingGroupType

EMailNotificationRecipient

HomeDeliveryPremiumType

EtdDetail

ImageId

ExportDetail

InternationalDocumentContentType

ExpressFreightDetail

LabelFormatType

ExpressFreightDetailContact

LabelMaskableDataType

FlatbedTrailerDetail

LabelPrintingOrientationType

FreightBaseCharge

LabelRotationType

FreightCommitDetail

LabelStockType

FreightGuaranteeDetail

LiabilityCoverageType

FreightRateDetail

LinearUnits

FreightRateNotation

NaftaImporterSpecificationType

FreightServiceCenterDetail

NaftaNetCostMethodCode

FreightShipmentDetail

NaftaPreferenceCriterionCode

FreightShipmentLineItem

NaftaProducerDeterminationCode

FreightSpecialServicePayment

NaftaProducerSpecificationType

GeneralAgencyAgreementDetail

NotificationSeverityType

HazardousCommodityContent

OversizeClassType

HazardousCommodityDescription

PackageSpecialServiceType

HazardousCommodityOptionDetail

PackagingType

HazardousCommodityPackagingDetail

PaymentType

HazardousCommodityQuantityDetail

PendingShipmentType

HoldAtLocationDetail

PhysicalPackagingType

HomeDeliveryPremiumDetail

PickupRequestSourceType

LabelSpecification

PickupRequestType

LiabilityCoverageDetail

PricingCodeType

LinearMeasure

PurposeOfShipmentType

Localization

RateDimensionalDivisorType

Measure

RateDiscountType

Money

RatedWeightMethod

NaftaCertificateOfOriginDetail

RateElementBasisType

NaftaCommodityDetail

RateRequestType

NaftaProducer

RateTypeBasisType

Notification

RebateType

NotificationParameter

RecipientCustomsIdType

Op900Detail

RegulatoryControlType

PackageRateDetail

RequestedShippingDocumentType

PackageSpecialServicesRequested

RequiredShippingDocumentType

Party

ReturnedRateType

Payment

ReturnEMailAllowedSpecialServiceType

Payor

ReturnType

PendingShipmentDetail

SecondaryBarcodeType

PickupDetail

ServiceOptionType

PriorityAlertDetail

ServiceType

RateDiscount

ShipmentSpecialServiceType

RatedPackageDetail

ShippingDocumentDispositionType

RatedShipmentDetail

ShippingDocumentEMailGroupingType

RateReply

ShippingDocumentGroupingType

RateReplyDetail

ShippingDocumentImageType

FedEx Web Services, Rate Services 37

RateRequest

ShippingDocumentStockType

Rebate

SignatureOptionType

RecipientCustomsId

SmartPostAncillaryEndorsementType

RequestedPackageLineItem

SmartPostIndiciaType

RequestedShipment

SpecialRatingAppliedType

ReturnEMailDetail

SurchargeLevelType

ReturnShipmentDetail

SurchargeType

Rma

TaxesOrMiscellaneousChargeType

ServiceSubOptionDetail

TaxType

ShipmentDryIceDetail

TermsOfSaleType

ShipmentRateDetail

TinType

ShipmentSpecialServicesRequested

TrackingIdType

ShippingDocumentDispositionDetail

TransitTimeType

ShippingDocumentEMailDetail

UploadDocumentIdProducer

ShippingDocumentEMailRecipient

UploadDocumentProducerType

ShippingDocumentFormat

UploadDocumentType

ShippingDocumentPrintDetail

VolumeUnits

ShippingDocumentSpecification

WeightUnits

SignatureOptionDetail

SmartPostShipmentDetail

Surcharge

Tax

TaxpayerIdentification

TrackingId

TransactionDetail

UploadDocumentDetail

UploadDocumentReferenceDetail

VariableHandlingChargeDetail

VariableHandlingCharges

VersionId

Volume

WebAuthenticationCredential

WebAuthenticationDetail

Weight

FedEx Web Services, Rate Services 38

element RateReply

diagram

namespace

http://fedex.com/ws/rate/v10

type

ns:RateReply

properties

content

complex

children

ns:HighestSeverity ns:Notifications ns:TransactionDetail ns:Version ns:RateReplyDetails

source

<xs:element name="RateReply" type="ns:RateReply"/>

FedEx Web Services, Rate Services 39

element RateRequest

diagram

FedEx Web Services, Rate Services 40

namespace

http://fedex.com/ws/rate/v10

type

ns:RateRequest

properties content

complex

children

ns:WebAuthenticationDetail ns:ClientDetail ns:TransactionDetail ns:Version ns:ReturnTransitAndCommit ns:CarrierCodes ns:VariableOptions

ns:RequestedShipment

source

<xs:element name="RateRequest" type="ns:RateRequest"/>

complexType AdditionalLabelsDetail

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:Type ns:Count

used by

element

CustomerSpecifiedLabelDetail/AdditionalLabels

annotation

documentation

Specifies additional labels to be produced. All required labels for shipments will be produced without the need to request additional labels. These are only

available as thermal labels.

source

<xs:complexType name="AdditionalLabelsDetail">

<xs:annotation>

<xs:documentation>Specifies additional labels to be produced. All required labels for shipments will be produced without the

need to request additional labels. These are only available as thermal labels.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Type" type="ns:AdditionalLabelsType" minOccurs="0">

<xs:annotation>

<xs:documentation>The type of additional labels to return.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Count" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>The number of this type label to return</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 41

</xs:element>

</xs:sequence>

</xs:complexType>

complexType Address

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:StreetLines ns:City ns:StateOrProvinceCode ns:PostalCode ns:UrbanizationCode ns:CountryCode ns:Residential

used by

elements

ContactAndAddress/Address Party/Address CommitDetail/BrokerAddress

FedEx Web Services, Rate Services 42

annotation

documentation

Descriptive data for a physical location. May be used as an actual physical address (place to which one could go), or as a container of "address parts" which

should be handled as a unit (such as a city-state-ZIP combination within the US).

source

<xs:complexType name="Address">

<xs:annotation>

<xs:documentation>Descriptive data for a physical location. May be used as an actual physical address (place to which one

could go), or as a container of "address parts" which should be handled as a unit (such as a city-state-ZIP combination within the

US).</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="StreetLines" type="xs:string" minOccurs="0" maxOccurs="2">

<xs:annotation>

<xs:documentation>Combination of number, street name, etc. At least one line is required for a valid physical address;

empty lines should not be included.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="City" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Name of city, town, etc.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="StateOrProvinceCode" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifying abbreviation for US state, Canada province, etc. Format and presence of this field will vary,

depending on country.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PostalCode" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identification of a region (usually small) for mail/package delivery. Format and presence of this field will

vary, depending on country.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="UrbanizationCode" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Relevant only to addresses in Puerto Rico.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CountryCode" type="xs:string">

<xs:annotation>

<xs:documentation>The two-letter code used to identify a country.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 43

</xs:element>

<xs:element name="Residential" type="xs:boolean" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates whether this address residential (as opposed to commercial).</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType CertificateOfOriginDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:DocumentFormat ns:CustomerImageUsages

used by

element

ShippingDocumentSpecification/CertificateOfOrigin

annotation

documentation

The instructions indicating how to print the Certificate of Origin ( e.g. whether or not to include the instructions, image type, etc ...)

source

<xs:complexType name="CertificateOfOriginDetail">

<xs:annotation>

<xs:documentation>The instructions indicating how to print the Certificate of Origin ( e.g. whether or not to include the

instructions, image type, etc ...)</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="DocumentFormat" type="ns:ShippingDocumentFormat" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies characteristics of a shipping document to be produced.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomerImageUsages" type="ns:CustomerImageUsage" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Specifies the usage and identification of customer supplied images to be used on this

document.</xs:documentation>

FedEx Web Services, Rate Services 44

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ClientDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:AccountNumber ns:MeterNumber ns:IntegratorId ns:Region ns:Localization

used by

element

RateRequest/ClientDetail

annotation

documentation

Descriptive data for the client submitting a transaction.

source

<xs:complexType name="ClientDetail">

FedEx Web Services, Rate Services 45

<xs:annotation>

<xs:documentation>Descriptive data for the client submitting a transaction.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="AccountNumber" type="xs:string">

<xs:annotation>

<xs:documentation>The FedEx account number associated with this transaction.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="MeterNumber" type="xs:string">

<xs:annotation>

<xs:documentation>This number is assigned by FedEx and identifies the unique device from which the request is

originating</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="IntegratorId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Only used in transactions which require identification of the Fed Ex Office

integrator.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Region" type="ns:ExpressRegionCode" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates the region from which the transaction is submitted.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Localization" type="ns:Localization" minOccurs="0">

<xs:annotation>

<xs:documentation>The language to be used for human-readable Notification.localizedMessages in responses to the

request containing this ClientDetail object. Different requests from the same client may contain different Localization data. (Contrast

with TransactionDetail.localization, which governs data payload language/translation.)</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 46

complexType CodAddTransportationChargesDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:RateTypeBasis ns:ChargeBasis ns:ChargeBasisLevel

used by

element

CodDetail/AddTransportationChargesDetail

source

<xs:complexType name="CodAddTransportationChargesDetail">

<xs:sequence>

<xs:element name="RateTypeBasis" type="ns:RateTypeBasisType" minOccurs="0"/>

<xs:element name="ChargeBasis" type="ns:CodAddTransportationChargeBasisType" minOccurs="0"/>

<xs:element name="ChargeBasisLevel" type="ns:ChargeBasisLevelType" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 47

complexType CodDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:CodCollectionAmount ns:AddTransportationChargesDetail ns:CollectionType ns:CodRecipient ns:ReferenceIndicator

used by

elements

PackageSpecialServicesRequested/CodDetail ShipmentSpecialServicesRequested/CodDetail

annotation

documentation

Descriptive data required for a FedEx COD (Collect-On-Delivery) shipment.

source

<xs:complexType name="CodDetail">

<xs:annotation>

<xs:documentation>Descriptive data required for a FedEx COD (Collect-On-Delivery) shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="CodCollectionAmount" type="ns:Money" minOccurs="0"/>

<xs:element name="AddTransportationChargesDetail" type="ns:CodAddTransportationChargesDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies the details of the charges are to be added to the COD collect amount.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CollectionType" type="ns:CodCollectionType">

<xs:annotation>

FedEx Web Services, Rate Services 48

<xs:documentation>Identifies the type of funds FedEx should collect upon package delivery</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CodRecipient" type="ns:Party" minOccurs="0">

<xs:annotation>

<xs:documentation>For Express this is the descriptive data that is used for the recipient of the FedEx Letter containing the

COD payment. For Ground this is the descriptive data for the party to receive the payment that prints the COD

receipt.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ReferenceIndicator" type="ns:CodReturnReferenceIndicatorType" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates which type of reference information to include on the COD return shipping

label.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType CommercialInvoice

diagram

FedEx Web Services, Rate Services 49

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Comments ns:FreightCharge ns:TaxesOrMiscellaneousCharge ns:TaxesOrMiscellaneousChargeType ns:PackingCosts ns:HandlingCosts

ns:SpecialInstructions ns:DeclarationStatment ns:PaymentTerms ns:Purpose ns:CustomerInvoiceNumber ns:OriginatorName ns:TermsOfSale

used by

element

CustomsClearanceDetail/CommercialInvoice

annotation

documentation

CommercialInvoice element is required for electronic upload of CI data. It will serve to create/transmit an Electronic Commercial Invoice through the FedEx

Systems. Customers are responsible for printing their own Commercial Invoice.If you would likeFedEx to generate a Commercial Invoice and transmit it to

Customs. for clearance purposes, you need to specify that in the ShippingDocumentSpecification element. If you would like a copy of the Commercial Invoice

that FedEx generated returned to you in reply it needs to be specified in the ETDDetail/RequestedDocumentCopies element. Commercial Invoice support

consists of maximum of 99 commodity line items.

FedEx Web Services, Rate Services 50

source

<xs:complexType name="CommercialInvoice">

<xs:annotation>

<xs:documentation>CommercialInvoice element is required for electronic upload of CI data. It will serve to create/transmit an

Electronic Commercial Invoice through the FedEx Systems. Customers are responsible for printing their own Commercial Invoice.If

you would likeFedEx to generate a Commercial Invoice and transmit it to Customs. for clearance purposes, you need to specify that

in the ShippingDocumentSpecification element. If you would like a copy of the Commercial Invoice that FedEx generated returned

to you in reply it needs to be specified in the ETDDetail/RequestedDocumentCopies element. Commercial Invoice support consists

of maximum of 99 commodity line items.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Comments" type="xs:string" minOccurs="0" maxOccurs="99">

<xs:annotation>

<xs:documentation>Any comments that need to be communicated about this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FreightCharge" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Any freight charges that are associated with this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TaxesOrMiscellaneousCharge" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Any taxes or miscellaneous charges(other than Freight charges or Insurance charges) that are

associated with this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TaxesOrMiscellaneousChargeType" type="ns:TaxesOrMiscellaneousChargeType" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies which kind of charge is being recorded in the preceding field.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PackingCosts" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Any packing costs that are associated with this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="HandlingCosts" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Any handling costs that are associated with this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SpecialInstructions" type="xs:string" minOccurs="0">

FedEx Web Services, Rate Services 51

<xs:annotation>

<xs:documentation>Free-form text.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DeclarationStatment" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Free-form text.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PaymentTerms" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Free-form text.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Purpose" type="ns:PurposeOfShipmentType" minOccurs="0">

<xs:annotation>

<xs:documentation>The reason for the shipment. Note: SOLD is not a valid purpose for a Proforma

Invoice.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomerInvoiceNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Customer assigned Invoice number</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="OriginatorName" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Name of the International Expert that completed the Commercial Invoice different from

Sender.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TermsOfSale" type="ns:TermsOfSaleType" minOccurs="0">

<xs:annotation>

<xs:documentation>Required for dutiable international Express or Ground shipment. This field is not applicable to an

international PIB(document) or a non-document which does not require a Commercial Invoice</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 52

complexType CommercialInvoiceDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:Format ns:CustomerImageUsages

used by

element

ShippingDocumentSpecification/CommercialInvoiceDetail

annotation

documentation

The instructions indicating how to print the Commercial Invoice( e.g. image type) Specifies characteristics of a shipping document to be produced.

source

<xs:complexType name="CommercialInvoiceDetail">

<xs:annotation>

<xs:documentation>The instructions indicating how to print the Commercial Invoice( e.g. image type) Specifies characteristics

of a shipping document to be produced.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Format" type="ns:ShippingDocumentFormat" minOccurs="0"/>

<xs:element name="CustomerImageUsages" type="ns:CustomerImageUsage" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Specifies the usage and identification of a customer supplied image to be used on this

document.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType CommitDetail

diagram

FedEx Web Services, Rate Services 53

diagram

FedEx Web Services, Rate Services 54

diagram

FedEx Web Services, Rate Services 55

namespace

http://fedex.com/ws/rate/v10

children

ns:CommodityName ns:ServiceType ns:AppliedOptions ns:AppliedSubOptions ns:CommitTimestamp ns:DayOfWeek ns:TransitTime

ns:MaximumTransitTime ns:DestinationServiceArea ns:BrokerAddress ns:BrokerLocationId ns:BrokerCommitTimestamp ns:BrokerCommitDayOfWeek

ns:BrokerToDestinationDays ns:ProofOfDeliveryDate ns:ProofOfDeliveryDayOfWeek ns:CommitMessages ns:DeliveryMessages ns:DelayDetails

ns:DocumentContent ns:RequiredDocuments ns:FreightCommitDetail

used by

element

RateReplyDetail/CommitDetails

annotation

documentation

Information about the transit time and delivery commitment date and time.

source

<xs:complexType name="CommitDetail">

<xs:annotation>

<xs:documentation>Information about the transit time and delivery commitment date and time.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="CommodityName" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The Commodity applicable to this commitment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ServiceType" type="ns:ServiceType" minOccurs="0">

<xs:annotation>

<xs:documentation>The FedEx service type applicable to this commitment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="AppliedOptions" type="ns:ServiceOptionType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Shows the specific combination of service options combined with the service type that produced this

committment in the set returned to the caller.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="AppliedSubOptions" type="ns:ServiceSubOptionDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Supporting detail for applied options identified in preceding field.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CommitTimestamp" type="xs:dateTime" minOccurs="0">

<xs:annotation>

<xs:documentation>THe delivery commitment date/time. Express Only.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DayOfWeek" type="ns:DayOfWeekType" minOccurs="0">

<xs:annotation>

FedEx Web Services, Rate Services 56

<xs:documentation>The delivery commitment day of the week.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TransitTime" type="ns:TransitTimeType" minOccurs="0">

<xs:annotation>

<xs:documentation>The number of transit days; applies to Ground and LTL Freight; indicates minimum transit time for

SmartPost.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="MaximumTransitTime" type="ns:TransitTimeType" minOccurs="0">

<xs:annotation>

<xs:documentation>Maximum number of transit days, for SmartPost shipments.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DestinationServiceArea" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The service area code for the destination of this shipment. Express only.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BrokerAddress" type="ns:Address" minOccurs="0">

<xs:annotation>

<xs:documentation>The address of the broker to be used for this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BrokerLocationId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The FedEx location identifier for the broker.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BrokerCommitTimestamp" type="xs:dateTime" minOccurs="0">

<xs:annotation>

<xs:documentation>The delivery commitment date/time the shipment will arrive at the border.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BrokerCommitDayOfWeek" type="ns:DayOfWeekType" minOccurs="0">

<xs:annotation>

<xs:documentation>The delivery commitment day of the week the shipment will arrive at the border.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BrokerToDestinationDays" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>The number of days it will take for the shipment to make it from broker to

FedEx Web Services, Rate Services 57

destination</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ProofOfDeliveryDate" type="xs:date" minOccurs="0">

<xs:annotation>

<xs:documentation>The delivery commitment date for shipment served by GSP (Global Service

Provider)</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ProofOfDeliveryDayOfWeek" type="ns:DayOfWeekType" minOccurs="0">

<xs:annotation>

<xs:documentation>The delivery commitment day of the week for the shipment served by GSP (Global Service

Provider)</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CommitMessages" type="ns:Notification" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Messages concerning the ability to provide an accurate delivery commitment on an International

commit quote. These could be messages providing information about why a commitment could not be returned or a successful

message such as "REQUEST COMPLETED"</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DeliveryMessages" type="xs:string" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Messages concerning the delivery commitment on an International commit quote such as "0:00 A.M.

IF NO CUSTOMS DELAY"</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DelayDetails" type="ns:DelayDetail" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Information about why a shipment delivery is delayed and at what level (country/service

etc.).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DocumentContent" type="ns:InternationalDocumentContentType" minOccurs="0"/>

<xs:element name="RequiredDocuments" type="ns:RequiredShippingDocumentType" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Required documentation for this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FreightCommitDetail" type="ns:FreightCommitDetail" minOccurs="0">

FedEx Web Services, Rate Services 58

<xs:annotation>

<xs:documentation>Freight origin and destination city center information and total distance between origin and destination

city centers.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType Commodity

diagram

FedEx Web Services, Rate Services 59

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Name ns:NumberOfPieces ns:Description ns:CountryOfManufacture ns:HarmonizedCode ns:Weight ns:Quantity ns:QuantityUnits

ns:AdditionalMeasures ns:UnitPrice ns:CustomsValue ns:ExciseConditions ns:ExportLicenseNumber ns:ExportLicenseExpirationDate

FedEx Web Services, Rate Services 60

ns:CIMarksAndNumbers ns:NaftaDetail

used by element

CustomsClearanceDetail/Commodities

annotation

documentation

For international multiple piece shipments, commodity information must be passed in the Master and on each child transaction.

If this shipment cotains more than four commodities line items, the four highest valued should be included in the first 4 occurances for this request.

source

<xs:complexType name="Commodity">

<xs:annotation>

<xs:documentation>

For international multiple piece shipments, commodity information must be passed in the Master and on each child

transaction.

If this shipment cotains more than four commodities line items, the four highest valued should be included in the first 4

occurances for this request.

</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Name" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>total number of pieces of this commodity</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="NumberOfPieces" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>total number of pieces of this commodity</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Description" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Complete and accurate description of this commodity.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>450</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="CountryOfManufacture" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Country code where commodity contents were produced or manufactured in their final

form.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>2</xs:MaxLength>

</xs:appinfo>

FedEx Web Services, Rate Services 61

</xs:annotation>

</xs:element>

<xs:element name="HarmonizedCode" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>

Unique alpha/numeric representing commodity item.

At least one occurrence is required for US Export shipments if the Customs Value is greater than $2500 or if a

valid US Export license is required.

</xs:documentation>

<xs:appinfo>

<xs:MaxLength>14</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="Weight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>Total weight of this commodity. 1 explicit decimal position. Max length 11 including

decimal.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Quantity" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Number of units of a commodity in total number of pieces for this line item. Max length is

9</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="QuantityUnits" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Unit of measure used to express the quantity of this commodity line item.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>3</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="AdditionalMeasures" type="ns:Measure" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Contains only additional quantitative information other than weight and quantity to calculate duties and

taxes.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="UnitPrice" type="ns:Money" minOccurs="0">

<xs:annotation>

FedEx Web Services, Rate Services 62

<xs:documentation>Value of each unit in Quantity. Six explicit decimal positions, Max length 18 including

decimal.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomsValue" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>

Total customs value for this line item.

It should equal the commodity unit quantity times commodity unit value.

Six explicit decimal positions, max length 18 including decimal.

</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ExciseConditions" type="ns:EdtExciseCondition" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Defines additional characteristic of commodity used to calculate duties and taxes</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ExportLicenseNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Applicable to US export shipping only.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>12</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="ExportLicenseExpirationDate" type="xs:date" minOccurs="0"/>

<xs:element name="CIMarksAndNumbers" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>

An identifying mark or number used on the packaging of a shipment to help customers identify a particular

shipment.

</xs:documentation>

<xs:appinfo>

<xs:MaxLength>15</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="NaftaDetail" type="ns:NaftaCommodityDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>All data required for this commodity in NAFTA Certificate of Origin.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 63

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ConfigurableLabelReferenceEntry

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:ZoneNumber ns:Header ns:DataField ns:LiteralValue

used by

element

CustomerSpecifiedLabelDetail/ConfigurableReferenceEntries

annotation

documentation

Defines additional data to print in the Configurable portion of the label, this allows you to print the same type information on the label that can also be printed on

the doc tab.

source

<xs:complexType name="ConfigurableLabelReferenceEntry">

<xs:annotation>

<xs:documentation>Defines additional data to print in the Configurable portion of the label, this allows you to print the same

type information on the label that can also be printed on the doc tab.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="ZoneNumber" type="xs:positiveInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>1 of 12 possible zones to position data.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Header" type="xs:string" minOccurs="0">

<xs:annotation>

FedEx Web Services, Rate Services 64

<xs:documentation>The identifiying text for the data in this zone.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DataField" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>A reference to a field in either the request or reply to print in this zone following the

header.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LiteralValue" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>A literal value to print after the header in this zone.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 65

complexType Contact

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:ContactId ns:PersonName ns:Title ns:CompanyName ns:PhoneNumber ns:PhoneExtension ns:PagerNumber ns:FaxNumber ns:EMailAddress

used by

elements

ContactAndAddress/Contact Party/Contact NaftaCertificateOfOriginDetail/SignatureContact

annotation

documentation

The descriptive data for a point-of-contact person.

source

<xs:complexType name="Contact">

<xs:annotation>

FedEx Web Services, Rate Services 66

<xs:documentation>The descriptive data for a point-of-contact person.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="ContactId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Client provided identifier corresponding to this contact information.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PersonName" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the contact person's name.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Title" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the contact person's title.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CompanyName" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the company this contact is associated with.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PhoneNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the phone number associated with this contact.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PhoneExtension" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the phone extension associated with this contact.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PagerNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the pager number associated with this contact.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FaxNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the fax number associated with this contact.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 67

</xs:element>

<xs:element name="EMailAddress" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the email address associated with this contact.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ContactAndAddress

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:Contact ns:Address

used by

elements

FreightServiceCenterDetail/ContactAndAddress FreightShipmentDetail/FedExFreightBillingContactAndAddress

FreightShipmentDetail/FedExNationalFreightBillingContactAndAddress HoldAtLocationDetail/LocationContactAndAddress

RequestedShipment/Origin LabelSpecification/PrintedLabelOrigin

source

<xs:complexType name="ContactAndAddress">

<xs:sequence>

<xs:element name="Contact" type="ns:Contact" minOccurs="0"/>

<xs:element name="Address" type="ns:Address" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType ContentRecord

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:PartNumber ns:ItemNumber ns:ReceivedQuantity ns:Description

FedEx Web Services, Rate Services 68

used by

element

RequestedPackageLineItem/ContentRecords

source

<xs:complexType name="ContentRecord">

<xs:sequence>

<xs:element name="PartNumber" type="xs:string" minOccurs="0"/>

<xs:element name="ItemNumber" type="xs:string" minOccurs="0"/>

<xs:element name="ReceivedQuantity" type="xs:nonNegativeInteger" minOccurs="0"/>

<xs:element name="Description" type="xs:string" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType CurrencyExchangeRate

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:FromCurrency ns:IntoCurrency ns:Rate

used by

element

ShipmentRateDetail/CurrencyExchangeRate

annotation

documentation

Specifies the currency exchange performed on financial amounts for this rate.

source

<xs:complexType name="CurrencyExchangeRate">

<xs:annotation>

<xs:documentation>Specifies the currency exchange performed on financial amounts for this rate.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="FromCurrency" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The currency code for the original (converted FROM) currency.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 69

<xs:element name="IntoCurrency" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The currency code for the final (converted INTO) currency.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Rate" type="xs:decimal" minOccurs="0">

<xs:annotation>

<xs:documentation>Multiplier used to convert fromCurrency units to intoCurrency units.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType CustomDeliveryWindowDetail

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:Type ns:RequestTime ns:RequestRange ns:RequestDate

used by

element

ShipmentSpecialServicesRequested/CustomDeliveryWindowDetail

source

<xs:complexType name="CustomDeliveryWindowDetail">

<xs:sequence>

<xs:element name="Type" type="ns:CustomDeliveryWindowType" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates the type of custom delivery being requested.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 70

</xs:element>

<xs:element name="RequestTime" type="xs:time" minOccurs="0">

<xs:annotation>

<xs:documentation>Time by which delivery is requested.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RequestRange" type="ns:DateRange" minOccurs="0">

<xs:annotation>

<xs:documentation>Range of dates for custom delivery request; only used if type is BETWEEN.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RequestDate" type="xs:date" minOccurs="0">

<xs:annotation>

<xs:documentation>Date for custom delivery request; only used for types of ON, BETWEEN, or

AFTER.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType CustomDocumentDetail

diagram

namespace

http://fedex.com/ws/rate/v10

FedEx Web Services, Rate Services 71

children

ns:Format ns:LabelPrintingOrientation ns:LabelRotation ns:SpecificationId

used by

elements

ShippingDocumentSpecification/CustomPackageDocumentDetail ShippingDocumentSpecification/CustomShipmentDocumentDetail

annotation documentation

Data required to produce a custom-specified document, either at shipment or package level.

source

<xs:complexType name="CustomDocumentDetail">

<xs:annotation>

<xs:documentation>Data required to produce a custom-specified document, either at shipment or package

level.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Format" type="ns:ShippingDocumentFormat" minOccurs="0">

<xs:annotation>

<xs:documentation>Common information controlling document production.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LabelPrintingOrientation" type="ns:LabelPrintingOrientationType" minOccurs="0">

<xs:annotation>

<xs:documentation>Applicable only to documents produced on thermal printers with roll stock.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LabelRotation" type="ns:LabelRotationType" minOccurs="0">

<xs:annotation>

<xs:documentation>Applicable only to documents produced on thermal printers with roll stock.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SpecificationId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the formatting specification used to construct this custom document.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType CustomerImageUsage

diagram

FedEx Web Services, Rate Services 72

namespace

http://fedex.com/ws/rate/v10

children

ns:Type ns:Id

used by elements

CertificateOfOriginDetail/CustomerImageUsages CommercialInvoiceDetail/CustomerImageUsages

NaftaCertificateOfOriginDetail/CustomerImageUsages Op900Detail/CustomerImageUsages

source

<xs:complexType name="CustomerImageUsage">

<xs:sequence>

<xs:element name="Type" type="ns:CustomerImageUsageType" minOccurs="0"/>

<xs:element name="Id" type="ns:ImageId" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType CustomerReference

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:CustomerReferenceType ns:Value

used by

element

RequestedPackageLineItem/CustomerReferences

annotation

documentation

Reference information to be associated with this package.

source

<xs:complexType name="CustomerReference">

<xs:annotation>

<xs:documentation>Reference information to be associated with this package.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="CustomerReferenceType" type="ns:CustomerReferenceType"/>

<xs:element name="Value" type="xs:string"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 73

complexType CustomerSpecifiedLabelDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:DocTabContent ns:CustomContent ns:ConfigurableReferenceEntries ns:MaskedData ns:SecondaryBarcode ns:TermsAndConditionsLocalization

ns:AdditionalLabels ns:AirWaybillSuppressionCount

FedEx Web Services, Rate Services 74

used by

element

LabelSpecification/CustomerSpecifiedDetail

annotation

documentation

Allows customer-specified control of label content.

source

<xs:complexType name="CustomerSpecifiedLabelDetail">

<xs:annotation>

<xs:documentation>Allows customer-specified control of label content.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="DocTabContent" type="ns:DocTabContent" minOccurs="0">

<xs:annotation>

<xs:documentation>If omitted, no doc tab will be produced (i.e. default = former NONE type).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomContent" type="ns:CustomLabelDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Defines any custom content to print on the label.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ConfigurableReferenceEntries" type="ns:ConfigurableLabelReferenceEntry" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Defines additional data to print in the Configurable portion of the label, this allows you to print the same

type information on the label that can also be printed on the doc tab.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="MaskedData" type="ns:LabelMaskableDataType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Controls which data/sections will be suppressed.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SecondaryBarcode" type="ns:SecondaryBarcodeType" minOccurs="0">

<xs:annotation>

<xs:documentation>For customers producing their own Ground labels, this field specifies which secondary barcode will be

printed on the label; so that the primary barcode produced by FedEx has the corect SCNC.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TermsAndConditionsLocalization" type="ns:Localization" minOccurs="0">

<xs:annotation>

<xs:documentation>The language to use when printing the terms and conditions on the label.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="AdditionalLabels" type="ns:AdditionalLabelsDetail" minOccurs="0" maxOccurs="unbounded">

FedEx Web Services, Rate Services 75

<xs:annotation>

<xs:documentation>Controls the number of additional copies of supplemental labels.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="AirWaybillSuppressionCount" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>This value reduces the default quantity of destination/consignee air waybill labels. A value of zero

indicates no change to default. A minimum of one copy will always be produced.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType CustomLabelBarcodeEntry

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Position ns:Format ns:DataFields ns:BarHeight ns:ThinBarWidth ns:BarcodeSymbology

used by element

CustomLabelDetail/BarcodeEntries

annotation

documentation

Constructed string, based on format and zero or more data fields, printed in specified barcode symbology.

source

<xs:complexType name="CustomLabelBarcodeEntry">

<xs:annotation>

<xs:documentation>Constructed string, based on format and zero or more data fields, printed in specified barcode

symbology.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 76

<xs:sequence>

<xs:element name="Position" type="ns:CustomLabelPosition" minOccurs="0"/>

<xs:element name="Format" type="xs:string" minOccurs="0"/>

<xs:element name="DataFields" type="xs:string" minOccurs="0" maxOccurs="unbounded"/>

<xs:element name="BarHeight" type="xs:int" minOccurs="0"/>

<xs:element name="ThinBarWidth" type="xs:int" minOccurs="0">

<xs:annotation>

<xs:documentation>Width of thinnest bar/space element in the barcode.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BarcodeSymbology" type="ns:BarcodeSymbologyType" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType CustomLabelBoxEntry

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:TopLeftCorner ns:BottomRightCorner

used by

element

CustomLabelDetail/BoxEntries

annotation

documentation

Solid (filled) rectangular area on label.

source

<xs:complexType name="CustomLabelBoxEntry">

<xs:annotation>

<xs:documentation>Solid (filled) rectangular area on label.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="TopLeftCorner" type="ns:CustomLabelPosition"/>

<xs:element name="BottomRightCorner" type="ns:CustomLabelPosition"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 77

complexType CustomLabelDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:CoordinateUnits ns:TextEntries ns:GraphicEntries ns:BoxEntries ns:BarcodeEntries

used by

element

CustomerSpecifiedLabelDetail/CustomContent

source

<xs:complexType name="CustomLabelDetail">

<xs:sequence>

<xs:element name="CoordinateUnits" type="ns:CustomLabelCoordinateUnits" minOccurs="0"/>

<xs:element name="TextEntries" type="ns:CustomLabelTextEntry" minOccurs="0" maxOccurs="unbounded"/>

<xs:element name="GraphicEntries" type="ns:CustomLabelGraphicEntry" minOccurs="0" maxOccurs="unbounded"/>

<xs:element name="BoxEntries" type="ns:CustomLabelBoxEntry" minOccurs="0" maxOccurs="unbounded"/>

<xs:element name="BarcodeEntries" type="ns:CustomLabelBarcodeEntry" minOccurs="0" maxOccurs="unbounded"/>

</xs:sequence>

</xs:complexType>

complexType CustomLabelGraphicEntry

diagram

FedEx Web Services, Rate Services 78

namespace

http://fedex.com/ws/rate/v10

children

ns:Position ns:PrinterGraphicId ns:FileGraphicFullName

used by element

CustomLabelDetail/GraphicEntries

annotation

documentation

Image to be included from printer's memory, or from a local file for offline clients.

source

<xs:complexType name="CustomLabelGraphicEntry">

<xs:annotation>

<xs:documentation>Image to be included from printer's memory, or from a local file for offline clients.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Position" type="ns:CustomLabelPosition" minOccurs="0"/>

<xs:element name="PrinterGraphicId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Printer-specific index of graphic image to be printed.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FileGraphicFullName" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Fully-qualified path and file name for graphic image to be printed.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType CustomLabelPosition

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:X ns:Y

used by

elements

CustomLabelBoxEntry/BottomRightCorner CustomLabelBarcodeEntry/Position CustomLabelGraphicEntry/Position

CustomLabelTextEntry/Position CustomLabelBoxEntry/TopLeftCorner

source

<xs:complexType name="CustomLabelPosition">

<xs:sequence>

FedEx Web Services, Rate Services 79

<xs:element name="X" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Horizontal position, relative to left edge of custom area.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Y" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Vertical position, relative to top edge of custom area.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType CustomLabelTextEntry

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Position ns:Format ns:DataFields ns:ThermalFontId ns:FontName ns:FontSize

used by

element

CustomLabelDetail/TextEntries

annotation documentation

Constructed string, based on format and zero or more data fields, printed in specified printer font (for thermal labels) or generic font/size (for plain paper labels).

source

<xs:complexType name="CustomLabelTextEntry">

<xs:annotation>

FedEx Web Services, Rate Services 80

<xs:documentation>Constructed string, based on format and zero or more data fields, printed in specified printer font (for

thermal labels) or generic font/size (for plain paper labels).</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Position" type="ns:CustomLabelPosition" minOccurs="0"/>

<xs:element name="Format" type="xs:string" minOccurs="0"/>

<xs:element name="DataFields" type="xs:string" minOccurs="0" maxOccurs="unbounded"/>

<xs:element name="ThermalFontId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Printer-specific font name for use with thermal printer labels.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FontName" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Generic font name for use with plain paper labels.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FontSize" type="xs:positiveInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Generic font size for use with plain paper labels.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 81

complexType CustomsClearanceDetail

diagram

FedEx Web Services, Rate Services 82

diagram

FedEx Web Services, Rate Services 83

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Broker ns:ClearanceBrokerage ns:ImporterOfRecord ns:RecipientCustomsId ns:DutiesPayment ns:DocumentContent ns:CustomsValue

ns:FreightOnValue ns:InsuranceCharges ns:PartiesToTransactionAreRelated ns:CommercialInvoice ns:Commodities ns:ExportDetail

ns:RegulatoryControls

used by

element

RequestedShipment/CustomsClearanceDetail

source

<xs:complexType name="CustomsClearanceDetail">

<xs:sequence>

<xs:element name="Broker" type="ns:Party" minOccurs="0">

<xs:annotation>

<xs:documentation>

Descriptive data identifying the Broker responsible for the shipmet.

Required if BROKER_SELECT_OPTION is requested in Special Services.

</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ClearanceBrokerage" type="ns:ClearanceBrokerageType" minOccurs="0">

<xs:annotation>

<xs:documentation>Interacts both with properties of the shipment and contractual relationship with the

shipper.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ImporterOfRecord" type="ns:Party" minOccurs="0">

<xs:annotation>

<xs:documentation>

Applicable only for Commercial Invoice. If the consignee and importer are not the same, the Following importer

fields are required.

Importer/Contact/PersonName

Importer/Contact/CompanyName

Importer/Contact/PhoneNumber

Importer/Address/StreetLine[0]

Importer/Address/City

FedEx Web Services, Rate Services 84

Importer/Address/StateOrProvinceCode - if Importer Country Code is US or CA

Importer/Address/PostalCode - if Importer Country Code is US or CA

Importer/Address/CountryCode

</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RecipientCustomsId" type="ns:RecipientCustomsId" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies how the recipient is identified for customs purposes; the requirements on this information

vary with destination country.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DutiesPayment" type="ns:Payment" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates how payment of duties for the shipment will be made.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DocumentContent" type="ns:InternationalDocumentContentType" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates whether this shipment contains documents only or non-documents.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomsValue" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The total customs value for the shipment. This total will rrepresent th esum of the values of all

commodities, and may include freight, miscellaneous, and insurance charges. Must contain 2 explicit decimal positions with a max

length of 17 including the decimal. For Express International MPS, the Total Customs Value is in the master transaction and all

child transactions</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FreightOnValue" type="ns:FreightOnValueType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies responsibilities with respect to loss, damage, etc.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="InsuranceCharges" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Documents amount paid to third party for coverage of shipment content.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PartiesToTransactionAreRelated" type="xs:boolean" minOccurs="0"/>

<xs:element name="CommercialInvoice" type="ns:CommercialInvoice" minOccurs="0">

FedEx Web Services, Rate Services 85

<xs:annotation>

<xs:documentation>CommercialInvoice element is required for electronic upload of CI data. It will serve to create/transmit

an Electronic Commercial Invoice through FedEx System. Customers are responsible for printing their own Commercial Invoice.

Commercial Invoice support consists of a maximum of 20 commodity line items.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Commodities" type="ns:Commodity" minOccurs="0" maxOccurs="99">

<xs:annotation>

<xs:documentation>

For international multiple piece shipments, commodity information must be passed in the Master and on each child

transaction.

If this shipment cotains more than four commodities line items, the four highest valued should be included in the

first 4 occurances for this request.

</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ExportDetail" type="ns:ExportDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Country specific details of an International shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RegulatoryControls" type="ns:RegulatoryControlType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>FOOD_OR_PERISHABLE is required by FDA/BTA; must be true for food/perishable items coming to

US or PR from non-US/non-PR origin.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 86

complexType DangerousGoodsDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:Accessibility ns:CargoAircraftOnly ns:Options ns:HazardousCommodities ns:Packaging ns:EmergencyContactNumber ns:Offeror

used by

element

PackageSpecialServicesRequested/DangerousGoodsDetail

annotation

documentation

The descriptive data required for a FedEx shipment containing dangerous goods (hazardous materials).

source

<xs:complexType name="DangerousGoodsDetail">

<xs:annotation>

<xs:documentation>The descriptive data required for a FedEx shipment containing dangerous goods (hazardous

materials).</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 87

<xs:sequence>

<xs:element name="Accessibility" type="ns:DangerousGoodsAccessibilityType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies whether or not the products being shipped are required to be accessible during

delivery.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CargoAircraftOnly" type="xs:boolean" minOccurs="0">

<xs:annotation>

<xs:documentation>Shipment is packaged/documented for movement ONLY on cargo aircraft.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Options" type="ns:HazardousCommodityOptionType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Indicates which kinds of hazardous content are in the current package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="HazardousCommodities" type="ns:HazardousCommodityContent" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Documents the kinds and quantities of all hazardous commodities in the current

package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Packaging" type="ns:HazardousCommodityPackagingDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Description of the packaging of this commodity, suitable for use on OP-900 and OP-950

forms.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="EmergencyContactNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Telephone number to use for contact in the event of an emergency.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Offeror" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Offeror's name or contract number, per DOT regulation.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 88

complexType DateRange

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Begins ns:Ends

used by elements

NaftaCertificateOfOriginDetail/BlanketPeriod NaftaCommodityDetail/NetCostDateRange CustomDeliveryWindowDetail/RequestRange

source

<xs:complexType name="DateRange">

<xs:sequence>

<xs:element name="Begins" type="xs:date"/>

<xs:element name="Ends" type="xs:date"/>

</xs:sequence>

</xs:complexType>

complexType DelayDetail

diagram

FedEx Web Services, Rate Services 89

namespace

http://fedex.com/ws/rate/v10

children

ns:Date ns:DayOfWeek ns:Level ns:Point ns:Type ns:Description

used by element

CommitDetail/DelayDetails

annotation

documentation

Information about why a shipment delivery is delayed and at what level( country/service etc.).

source

<xs:complexType name="DelayDetail">

<xs:annotation>

<xs:documentation>Information about why a shipment delivery is delayed and at what level( country/service

etc.).</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Date" type="xs:date" minOccurs="0">

<xs:annotation>

<xs:documentation>The date of the delay</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DayOfWeek" type="ns:DayOfWeekType" minOccurs="0"/>

<xs:element name="Level" type="ns:DelayLevelType" minOccurs="0">

<xs:annotation>

<xs:documentation>The attribute of the shipment that caused the delay(e.g. Country, City, LocationId, Zip, service area,

special handling )</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Point" type="ns:DelayPointType" minOccurs="0">

<xs:annotation>

<xs:documentation>The point where the delay is occurring (e.g. Origin, Destination, Broker location)</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Type" type="ns:CommitmentDelayType" minOccurs="0">

<xs:annotation>

<xs:documentation>The reason for the delay (e.g. holiday, weekend, etc.).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Description" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The name of the holiday in that country that is causing the delay.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 90

complexType DestinationControlDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:StatementTypes ns:DestinationCountries ns:EndUser

used by

element

ExportDetail/DestinationControlDetail

annotation

documentation

Data required to complete the Destionation Control Statement for US exports.

source

<xs:complexType name="DestinationControlDetail">

<xs:annotation>

<xs:documentation>Data required to complete the Destionation Control Statement for US exports.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="StatementTypes" type="ns:DestinationControlStatementType" minOccurs="0" maxOccurs="unbounded"/>

<xs:element name="DestinationCountries" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Comma-separated list of up to four country codes, required for DEPARTMENT_OF_STATE

statement.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="EndUser" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Name of end user, required for DEPARTMENT_OF_STATE statement.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 91

complexType Dimensions

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Length ns:Width ns:Height ns:Units

used by

elements

FreightShipmentLineItem/Dimensions RequestedPackageLineItem/Dimensions FreightShipmentDetail/ShipmentDimensions

annotation

documentation

The dimensions of this package and the unit type used for the measurements.

source

<xs:complexType name="Dimensions">

<xs:annotation>

<xs:documentation>The dimensions of this package and the unit type used for the measurements.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Length" type="xs:nonNegativeInteger"/>

<xs:element name="Width" type="xs:nonNegativeInteger"/>

<xs:element name="Height" type="xs:nonNegativeInteger"/>

<xs:element name="Units" type="ns:LinearUnits"/>

</xs:sequence>

</xs:complexType>

complexType Distance

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Value ns:Units

FedEx Web Services, Rate Services 92

used by

elements

FreightServiceCenterDetail/LocalDistance FreightCommitDetail/TotalDistance

annotation

documentation

Driving or other transportation distances, distinct from dimension measurements.

source

<xs:complexType name="Distance">

<xs:annotation>

<xs:documentation>Driving or other transportation distances, distinct from dimension measurements.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Value" type="xs:decimal" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the distance quantity.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Units" type="ns:DistanceUnits" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the unit of measure for the distance value.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType DocTabContent

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:DocTabContentType ns:Zone001 ns:Barcoded

used by

element

CustomerSpecifiedLabelDetail/DocTabContent

FedEx Web Services, Rate Services 93

source

<xs:complexType name="DocTabContent">

<xs:sequence>

<xs:element name="DocTabContentType" type="ns:DocTabContentType" minOccurs="0">

<xs:annotation>

<xs:documentation>The DocTabContentType options available.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Zone001" type="ns:DocTabContentZone001" minOccurs="0">

<xs:annotation>

<xs:documentation>The DocTabContentType should be set to ZONE001 to specify additional Zone

details.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Barcoded" type="ns:DocTabContentBarcoded" minOccurs="0">

<xs:annotation>

<xs:documentation>The DocTabContentType should be set to BARCODED to specify additional BarCoded

details.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType DocTabContentBarcoded

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Symbology ns:Specification

used by

element

DocTabContent/Barcoded

source

<xs:complexType name="DocTabContentBarcoded">

<xs:sequence>

<xs:element name="Symbology" type="ns:BarcodeSymbologyType" minOccurs="0"/>

<xs:element name="Specification" type="ns:DocTabZoneSpecification" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 94

complexType DocTabContentZone001

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:DocTabZoneSpecifications

used by

element

DocTabContent/Zone001

source

<xs:complexType name="DocTabContentZone001">

<xs:sequence>

<xs:element name="DocTabZoneSpecifications" type="ns:DocTabZoneSpecification" maxOccurs="12"/>

</xs:sequence>

</xs:complexType>

complexType DocTabZoneSpecification

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:ZoneNumber ns:Header ns:DataField ns:LiteralValue ns:Justification

used by

elements

DocTabContentZone001/DocTabZoneSpecifications DocTabContentBarcoded/Specification

source

<xs:complexType name="DocTabZoneSpecification">

FedEx Web Services, Rate Services 95

<xs:sequence>

<xs:element name="ZoneNumber" type="xs:positiveInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Zone number can be between 1 and 12.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Header" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Header value on this zone.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DataField" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Reference path to the element in the request/reply whose value should be printed on this

zone.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LiteralValue" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Free form-text to be printed in this zone.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Justification" type="ns:DocTabZoneJustificationType" minOccurs="0">

<xs:annotation>

<xs:documentation>Justification for the text printed on this zone.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType EdtCommodityTax

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:HarmonizedCode ns:Taxes

FedEx Web Services, Rate Services 96

used by

element

ShipmentRateDetail/DutiesAndTaxes

source

<xs:complexType name="EdtCommodityTax">

<xs:sequence>

<xs:element name="HarmonizedCode" type="xs:string" minOccurs="0"/>

<xs:element name="Taxes" type="ns:EdtTaxDetail" minOccurs="0" maxOccurs="unbounded"/>

</xs:sequence>

</xs:complexType>

complexType EdtExciseCondition

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Category ns:Value

used by

element

Commodity/ExciseConditions

source

<xs:complexType name="EdtExciseCondition">

<xs:sequence>

<xs:element name="Category" type="xs:string" minOccurs="0"/>

<xs:element name="Value" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Customer-declared value, with data type and legal values depending on excise condition, used in

defining the taxable value of the item.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 97

complexType EdtTaxDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:TaxType ns:EffectiveDate ns:Name ns:TaxableValue ns:Description ns:Formula ns:Amount

used by element

EdtCommodityTax/Taxes

source

<xs:complexType name="EdtTaxDetail">

<xs:sequence>

<xs:element name="TaxType" type="ns:EdtTaxType" minOccurs="0"/>

<xs:element name="EffectiveDate" type="xs:date" minOccurs="0"/>

<xs:element name="Name" type="xs:string" minOccurs="0"/>

<xs:element name="TaxableValue" type="ns:Money" minOccurs="0"/>

<xs:element name="Description" type="xs:string" minOccurs="0"/>

<xs:element name="Formula" type="xs:string" minOccurs="0"/>

<xs:element name="Amount" type="ns:Money" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType EMailLabelDetail

diagram

FedEx Web Services, Rate Services 98

namespace

http://fedex.com/ws/rate/v10

children

ns:NotificationEMailAddress ns:NotificationMessage

used by element

PendingShipmentDetail/EmailLabelDetail

annotation

documentation

Specific information about the delivery of the email and options for the shipment.

source

<xs:complexType name="EMailLabelDetail">

<xs:annotation>

<xs:documentation>Specific information about the delivery of the email and options for the shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="NotificationEMailAddress" type="xs:string">

<xs:annotation>

<xs:documentation>Email address to send the URL to.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="NotificationMessage" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>A message to be inserted into the email.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType EMailNotificationDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:PersonalMessage ns:Recipients

used by

element

ShipmentSpecialServicesRequested/EMailNotificationDetail

FedEx Web Services, Rate Services 99

annotation

documentation

Information describing email notifications that will be sent in relation to events that occur during package movement

source

<xs:complexType name="EMailNotificationDetail">

<xs:annotation>

<xs:documentation>Information describing email notifications that will be sent in relation to events that occur during package

movement</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="PersonalMessage" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>A message that will be included in the email notifications</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Recipients" type="ns:EMailNotificationRecipient" minOccurs="0" maxOccurs="6">

<xs:annotation>

<xs:documentation>Information describing the destination of the email, format of the email and events to be notified

on</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType EMailNotificationRecipient

diagram

FedEx Web Services, Rate Services 100

namespace

http://fedex.com/ws/rate/v10

children

ns:EMailNotificationRecipientType ns:EMailAddress ns:NotificationEventsRequested ns:Format ns:Localization

used by element

EMailNotificationDetail/Recipients

annotation

documentation

The descriptive data for a FedEx email notification recipient.

source

<xs:complexType name="EMailNotificationRecipient">

<xs:annotation>

<xs:documentation>The descriptive data for a FedEx email notification recipient.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="EMailNotificationRecipientType" type="ns:EMailNotificationRecipientType">

<xs:annotation>

<xs:documentation>Identifies the relationship this email recipient has to the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="EMailAddress" type="xs:string">

<xs:annotation>

<xs:documentation>The email address to send the notification to</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="NotificationEventsRequested" type="ns:EMailNotificationEventType" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>The types of email notifications being requested for this recipient.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Format" type="ns:EMailNotificationFormatType" minOccurs="0">

<xs:annotation>

<xs:documentation>The format of the email notification.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Localization" type="ns:Localization" minOccurs="0">

<xs:annotation>

<xs:documentation>The language/locale to be used in this email notification.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 101

complexType EtdDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:RequestedDocumentCopies ns:Documents ns:DocumentReferences

used by element

ShipmentSpecialServicesRequested/EtdDetail

annotation

documentation

Electronic Trade document references used with the ETD special service.

source

<xs:complexType name="EtdDetail">

<xs:annotation>

<xs:documentation>Electronic Trade document references used with the ETD special service.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="RequestedDocumentCopies" type="ns:RequestedShippingDocumentType" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Indicates the types of shipping documents produced for the shipper by FedEx (see

ShippingDocumentSpecification) which should be copied back to the shipper in the shipment result data.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Documents" type="ns:UploadDocumentDetail" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Currently not supported.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DocumentReferences" type="ns:UploadDocumentReferenceDetail" minOccurs="0"

maxOccurs="unbounded"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 102

complexType ExportDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:B13AFilingOption ns:ExportComplianceStatement ns:PermitNumber ns:DestinationControlDetail

used by

element

CustomsClearanceDetail/ExportDetail

annotation

documentation

Country specific details of an International shipment.

source

<xs:complexType name="ExportDetail">

<xs:annotation>

<xs:documentation>Country specific details of an International shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="B13AFilingOption" type="ns:B13AFilingOptionType" minOccurs="0">

<xs:annotation>

<xs:documentation>

Specifies which filing option is being exercised by the customer.

Required for non-document shipments originating in Canada destined for any country other than Canada, the

United States, Puerto Rico or the U.S. Virgin Islands.

FedEx Web Services, Rate Services 103

</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ExportComplianceStatement" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>General field for exporting-country-specific export data (e.g. B13A for CA, FTSR Exemption or AES

Citation for US).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PermitNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>This field is applicable only to Canada export non-document shipments of any value to any destination.

No special characters allowed. </xs:documentation>

<xs:appinfo>

<xs:MaxLength>10</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="DestinationControlDetail" type="ns:DestinationControlDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Department of Commerce/Department of State information about this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 104

complexType ExpressFreightDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:PackingListEnclosed ns:ShippersLoadAndCount ns:BookingConfirmationNumber ns:ReferenceLabelRequested ns:BeforeDeliveryContact

ns:UndeliverableContact

used by

element

RequestedShipment/ExpressFreightDetail

annotation

documentation

Details specific to an Express freight shipment.

source

<xs:complexType name="ExpressFreightDetail">

<xs:annotation>

<xs:documentation>Details specific to an Express freight shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="PackingListEnclosed" type="xs:boolean" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates whether or nor a packing list is enclosed.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 105

<xs:element name="ShippersLoadAndCount" type="xs:positiveInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>

Total shipment pieces.

ie. 3 boxes and 3 pallets of 100 pieces each = Shippers Load and Count of 303.

Applicable to International Priority Freight and International Economy Freight.

Values must be in the range of 1 - 99999

</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BookingConfirmationNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Required for International Freight shipping. Values must be 8- 12 characters in

length.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>12</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="ReferenceLabelRequested" type="xs:boolean" minOccurs="0">

<xs:annotation>

<xs:documentation>Currently not supported.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BeforeDeliveryContact" type="ns:ExpressFreightDetailContact" minOccurs="0">

<xs:annotation>

<xs:documentation>Currently not supported.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="UndeliverableContact" type="ns:ExpressFreightDetailContact" minOccurs="0">

<xs:annotation>

<xs:documentation>Currently not supported.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 106

complexType ExpressFreightDetailContact

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Name ns:Phone

used by

elements

ExpressFreightDetail/BeforeDeliveryContact ExpressFreightDetail/UndeliverableContact

annotation

documentation

Currently not supported. Delivery contact information for an Express freight shipment.

source

<xs:complexType name="ExpressFreightDetailContact">

<xs:annotation>

<xs:documentation>Currently not supported. Delivery contact information for an Express freight shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Name" type="xs:string" minOccurs="0"/>

<xs:element name="Phone" type="xs:string" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType FlatbedTrailerDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Options

used by

element

ShipmentSpecialServicesRequested/FlatbedTrailerDetail

annotation

documentation

Specifies the optional features/characteristics requested for a Freight shipment utilizing a flatbed trailer.

source

<xs:complexType name="FlatbedTrailerDetail">

<xs:annotation>

<xs:documentation>Specifies the optional features/characteristics requested for a Freight shipment utilizing a flatbed

trailer.</xs:documentation>

FedEx Web Services, Rate Services 107

</xs:annotation>

<xs:sequence>

<xs:element name="Options" type="ns:FlatbedTrailerOption" minOccurs="0" maxOccurs="unbounded"/>

</xs:sequence>

</xs:complexType>

complexType FreightBaseCharge

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:FreightClass ns:RatedAsClass ns:NmfcCode ns:Description ns:Weight ns:ChargeRate ns:ChargeBasis ns:ExtendedAmount

used by

element

FreightRateDetail/BaseCharges

FedEx Web Services, Rate Services 108

annotation

documentation

Individual charge which contributes to the total base charge for the shipment.

source

<xs:complexType name="FreightBaseCharge">

<xs:annotation>

<xs:documentation>Individual charge which contributes to the total base charge for the shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="FreightClass" type="ns:FreightClassType" minOccurs="0">

<xs:annotation>

<xs:documentation>Freight class for this line item.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RatedAsClass" type="ns:FreightClassType" minOccurs="0">

<xs:annotation>

<xs:documentation>Effective freight class used for rating this line item.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="NmfcCode" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>NMFC Code for commodity.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Description" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Customer-provided description for this commodity or class line.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Weight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>Weight for this commodity or class line.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ChargeRate" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Rate or factor applied to this line item.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ChargeBasis" type="ns:FreightChargeBasisType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the manner in which the chargeRate for this line item was applied.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 109

<xs:element name="ExtendedAmount" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The net or extended charge for this line item.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType FreightCommitDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:OriginDetail ns:DestinationDetail ns:TotalDistance

used by

element

CommitDetail/FreightCommitDetail

annotation

documentation

Information about the Freight Service Centers associated with this shipment.

source

<xs:complexType name="FreightCommitDetail">

<xs:annotation>

<xs:documentation>Information about the Freight Service Centers associated with this shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="OriginDetail" type="ns:FreightServiceCenterDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Information about the origin Freight Service Center.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DestinationDetail" type="ns:FreightServiceCenterDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Information about the destination Freight Service Center.</xs:documentation>

FedEx Web Services, Rate Services 110

</xs:annotation>

</xs:element>

<xs:element name="TotalDistance" type="ns:Distance" minOccurs="0">

<xs:annotation>

<xs:documentation>The distance between the origin and destination FreightService Centers</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType FreightGuaranteeDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Type ns:Date

used by

element

ShipmentSpecialServicesRequested/FreightGuaranteeDetail

source

<xs:complexType name="FreightGuaranteeDetail">

<xs:sequence>

<xs:element name="Type" type="ns:FreightGuaranteeType" minOccurs="0"/>

<xs:element name="Date" type="xs:date" minOccurs="0">

<xs:annotation>

<xs:documentation>Date for all Freight guarantee types.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 111

complexType FreightRateDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:QuoteNumber ns:BaseChargeCalculation ns:BaseCharges ns:Notations

used by

element

ShipmentRateDetail/FreightRateDetail

annotation

documentation

Rate data specific to FedEx Freight or FedEx National Freight services.

source

<xs:complexType name="FreightRateDetail">

<xs:annotation>

<xs:documentation>Rate data specific to FedEx Freight or FedEx National Freight services.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="QuoteNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>A unique identifier for a specific rate quotation.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BaseChargeCalculation" type="ns:FreightBaseChargeCalculationType" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies how total base charge is determined.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BaseCharges" type="ns:FreightBaseCharge" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Freight charges which accumulate to the total base charge for the shipment.</xs:documentation>

FedEx Web Services, Rate Services 112

</xs:annotation>

</xs:element>

<xs:element name="Notations" type="ns:FreightRateNotation" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Human-readable descriptions of additional information on this shipment rating.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType FreightRateNotation

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Code ns:Description

used by

element

FreightRateDetail/Notations

annotation

documentation

Additional non-monetary data returned with Freight rates.

source

<xs:complexType name="FreightRateNotation">

<xs:annotation>

<xs:documentation>Additional non-monetary data returned with Freight rates.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Code" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Unique identifier for notation.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Description" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Human-readable explanation of notation.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 113

complexType FreightServiceCenterDetail

diagram

FedEx Web Services, Rate Services 114

namespace

http://fedex.com/ws/rate/v10

children

ns:InterlineCarrierCode ns:InterlineCarrierName ns:AdditionalDays ns:LocalService ns:LocalDistance ns:LocalDuration ns:LocalServiceScheduling

ns:LimitedServiceDays ns:GatewayLocationId ns:Location ns:ContactAndAddress

used by

elements

FreightCommitDetail/DestinationDetail FreightCommitDetail/OriginDetail

annotation

documentation

This class describes the relationship between a customer-specified address and the FedEx Freight / FedEx National Freight Service Center that supports that

address.

source

<xs:complexType name="FreightServiceCenterDetail">

<xs:annotation>

<xs:documentation>This class describes the relationship between a customer-specified address and the FedEx Freight / FedEx

National Freight Service Center that supports that address.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="InterlineCarrierCode" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Freight Industry standard non-FedEx carrier identification</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="InterlineCarrierName" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The name of the Interline carrier.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="AdditionalDays" type="xs:int" minOccurs="0">

<xs:annotation>

<xs:documentation>Additional time it might take at the origin or destination to pickup or deliver the freight. This is usually

due to the remoteness of the location. This time is included in the total transit time.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LocalService" type="ns:ServiceType" minOccurs="0">

<xs:annotation>

<xs:documentation>Service branding which may be used for local pickup or delivery, distinct from service used for line-haul

of customer's shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LocalDistance" type="ns:Distance" minOccurs="0">

<xs:annotation>

<xs:documentation>Distance between customer address (pickup or delivery) and the supporting Freight / National Freight

service center.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 115

<xs:element name="LocalDuration" type="xs:duration" minOccurs="0">

<xs:annotation>

<xs:documentation>Time to travel between customer address (pickup or delivery) and the supporting Freight / National

Freight service center.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LocalServiceScheduling" type="ns:FreightServiceSchedulingType" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies when/how the customer can arrange for pickup or delivery.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LimitedServiceDays" type="ns:DayOfWeekType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Specifies days of operation if localServiceScheduling is LIMITED.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="GatewayLocationId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Freight service center that is a gateway on the border of Canada or Mexico.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Location" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Alphabetical code identifying a Freight Service Center</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ContactAndAddress" type="ns:ContactAndAddress" minOccurs="0">

<xs:annotation>

<xs:documentation>Freight service center Contact and Address</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 116

complexType FreightShipmentDetail

diagram

FedEx Web Services, Rate Services 117

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:FedExFreightAccountNumber ns:FedExFreightBillingContactAndAddress ns:FedExNationalFreightAccountNumber

ns:FedExNationalFreightBillingContactAndAddress ns:Role ns:PaymentType ns:DeclaredValuePerUnit ns:DeclaredValueUnits

ns:LiabilityCoverageDetail ns:Coupons ns:TotalHandlingUnits ns:ClientDiscountPercent ns:PalletWeight ns:ShipmentDimensions ns:Comment

ns:SpecialServicePayments ns:LineItems

used by element

RequestedShipment/FreightShipmentDetail

annotation

documentation

Data applicable to shipments using FEDEX_FREIGHT and FEDEX_NATIONAL_FREIGHT services.

source

<xs:complexType name="FreightShipmentDetail">

<xs:annotation>

<xs:documentation>Data applicable to shipments using FEDEX_FREIGHT and FEDEX_NATIONAL_FREIGHT

FedEx Web Services, Rate Services 118

services.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="FedExFreightAccountNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Account number used with FEDEX_FREIGHT service.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FedExFreightBillingContactAndAddress" type="ns:ContactAndAddress" minOccurs="0">

<xs:annotation>

<xs:documentation>Used for validating FedEx Freight account number and (optionally) identifying third party payment on

the bill of lading.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FedExNationalFreightAccountNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Account number used with FEDEX_NATIONAL_FREIGHT service.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FedExNationalFreightBillingContactAndAddress" type="ns:ContactAndAddress" minOccurs="0">

<xs:annotation>

<xs:documentation>Used for validating FedEx National Freight account number and (optionally) identifying third party

payment on the bill of lading.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Role" type="ns:FreightShipmentRoleType" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates the role of the party submitting the transaction.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PaymentType" type="ns:FreightAccountPaymentType" minOccurs="0">

<xs:annotation>

<xs:documentation>Designates which of the requester's tariffs will be used for rating.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DeclaredValuePerUnit" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the declared value for the shipment</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DeclaredValueUnits" type="xs:string" minOccurs="0">

<xs:annotation>

FedEx Web Services, Rate Services 119

<xs:documentation>Identifies the declared value units corresponding to the above defined declared

value</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LiabilityCoverageDetail" type="ns:LiabilityCoverageDetail" minOccurs="0"/>

<xs:element name="Coupons" type="xs:string" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Identifiers for promotional discounts offered to customers.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalHandlingUnits" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Total number of individual handling units in the entire shipment (for unit pricing).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ClientDiscountPercent" type="xs:decimal" minOccurs="0">

<xs:annotation>

<xs:documentation>Estimated discount rate provided by client for unsecured rate quote.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PalletWeight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>Total weight of pallets used in shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ShipmentDimensions" type="ns:Dimensions" minOccurs="0">

<xs:annotation>

<xs:documentation>Overall shipment dimensions.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Comment" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Description for the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SpecialServicePayments" type="ns:FreightSpecialServicePayment" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Specifies which party will pay surcharges for any special services which support split

billing.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 120

<xs:element name="LineItems" type="ns:FreightShipmentLineItem" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Details of the commodities in the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType FreightShipmentLineItem

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:FreightClass ns:Packaging ns:Description ns:Weight ns:Dimensions ns:Volume

used by

element

FreightShipmentDetail/LineItems

annotation

documentation

Description of an individual commodity or class of content in a shipment.

source

<xs:complexType name="FreightShipmentLineItem">

<xs:annotation>

FedEx Web Services, Rate Services 121

<xs:documentation>Description of an individual commodity or class of content in a shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="FreightClass" type="ns:FreightClassType" minOccurs="0">

<xs:annotation>

<xs:documentation>Freight class for this line item.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Packaging" type="ns:PhysicalPackagingType" minOccurs="0">

<xs:annotation>

<xs:documentation>Specification of handling-unit packaging for this commodity or class line.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Description" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Customer-provided description for this commodity or class line.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Weight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>Weight for this commodity or class line.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Dimensions" type="ns:Dimensions" minOccurs="0">

<xs:annotation>

<xs:documentation>FED EX INTERNAL USE ONLY - Individual line item dimensions.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Volume" type="ns:Volume" minOccurs="0">

<xs:annotation>

<xs:documentation>Volume (cubic measure) for this commodity or class line.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 122

complexType FreightSpecialServicePayment

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:SpecialService ns:PaymentType

used by

element

FreightShipmentDetail/SpecialServicePayments

annotation

documentation

Specifies which party will be responsible for payment of any surcharges for Freight special services for which split billing is allowed.

source

<xs:complexType name="FreightSpecialServicePayment">

<xs:annotation>

<xs:documentation>Specifies which party will be responsible for payment of any surcharges for Freight special services for

which split billing is allowed.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="SpecialService" type="ns:ShipmentSpecialServiceType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the special service.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PaymentType" type="ns:FreightAccountPaymentType" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates who will pay for the special service.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType GeneralAgencyAgreementDetail

diagram

namespace

http://fedex.com/ws/rate/v10

FedEx Web Services, Rate Services 123

children

ns:Format

used by

element

ShippingDocumentSpecification/GeneralAgencyAgreementDetail

annotation documentation

Data required to produce a General Agency Agreement document. Remaining content (business data) to be defined once requirements have been completed.

source

<xs:complexType name="GeneralAgencyAgreementDetail">

<xs:annotation>

<xs:documentation>Data required to produce a General Agency Agreement document. Remaining content (business data) to

be defined once requirements have been completed.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Format" type="ns:ShippingDocumentFormat" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType HazardousCommodityContent

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Description ns:Quantity ns:Options

used by

element

DangerousGoodsDetail/HazardousCommodities

annotation

documentation

Documents the kind and quantity of an individual hazardous commodity in a package.

source

<xs:complexType name="HazardousCommodityContent">

<xs:annotation>

<xs:documentation>Documents the kind and quantity of an individual hazardous commodity in a package.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Description" type="ns:HazardousCommodityDescription" minOccurs="0">

FedEx Web Services, Rate Services 124

<xs:annotation>

<xs:documentation>Identifies and describes an individual hazardous commodity.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Quantity" type="ns:HazardousCommodityQuantityDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies the amount of the commodity in alternate units.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Options" type="ns:HazardousCommodityOptionDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Customer-provided specifications for handling individual commodities.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType HazardousCommodityDescription

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Id ns:PackingGroup ns:ProperShippingName ns:TechnicalName ns:HazardClass ns:SubsidiaryClasses ns:LabelText

used by

element

HazardousCommodityContent/Description

FedEx Web Services, Rate Services 125

annotation

documentation

Identifies and describes an individual hazardous commodity. For 201001 load, this is based on data from the FedEx Ground Hazardous Materials Shipping

Guide.

source

<xs:complexType name="HazardousCommodityDescription">

<xs:annotation>

<xs:documentation>Identifies and describes an individual hazardous commodity. For 201001 load, this is based on data from

the FedEx Ground Hazardous Materials Shipping Guide.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Id" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Regulatory identifier for a commodity (e.g. "UN ID" value).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PackingGroup" type="ns:HazardousCommodityPackingGroupType" minOccurs="0"/>

<xs:element name="ProperShippingName" type="xs:string" minOccurs="0"/>

<xs:element name="TechnicalName" type="xs:string" minOccurs="0"/>

<xs:element name="HazardClass" type="xs:string" minOccurs="0"/>

<xs:element name="SubsidiaryClasses" type="xs:string" minOccurs="0" maxOccurs="unbounded"/>

<xs:element name="LabelText" type="xs:string" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType HazardousCommodityOptionDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:LabelTextOption ns:CustomerSuppliedLabelText

used by

element

HazardousCommodityContent/Options

annotation

documentation

Customer-provided specifications for handling individual commodities.

source

<xs:complexType name="HazardousCommodityOptionDetail">

<xs:annotation>

FedEx Web Services, Rate Services 126

<xs:documentation>Customer-provided specifications for handling individual commodities.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="LabelTextOption" type="ns:HazardousCommodityLabelTextOptionType" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies how the customer wishes the label text to be handled for this commodity in this

package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomerSuppliedLabelText" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Text used in labeling the commodity under control of the labelTextOption field.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType HazardousCommodityPackagingDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Count ns:Units

used by

element

DangerousGoodsDetail/Packaging

annotation

documentation

Identifies number and type of packaging units for hazardous commodities.

source

<xs:complexType name="HazardousCommodityPackagingDetail">

<xs:annotation>

<xs:documentation>Identifies number and type of packaging units for hazardous commodities.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Count" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Number of units of the type below.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 127

</xs:element>

<xs:element name="Units" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Units in which the hazardous commodity is packaged.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType HazardousCommodityQuantityDetail

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:Amount ns:Units

used by

element

HazardousCommodityContent/Quantity

annotation

documentation

Identifies amount and units for quantity of hazardous commodities.

source

<xs:complexType name="HazardousCommodityQuantityDetail">

<xs:annotation>

<xs:documentation>Identifies amount and units for quantity of hazardous commodities.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Amount" type="xs:decimal" minOccurs="0">

<xs:annotation>

<xs:documentation>Number of units of the type below.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Units" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Units by which the hazardous commodity is measured.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 128

complexType HoldAtLocationDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:PhoneNumber ns:LocationContactAndAddress ns:LocationType ns:LocationId ns:LocationNumber

used by element

ShipmentSpecialServicesRequested/HoldAtLocationDetail

annotation

documentation

Descriptive data required for a FedEx shipment that is to be held at the destination FedEx location for pickup by the recipient.

source

<xs:complexType name="HoldAtLocationDetail">

<xs:annotation>

<xs:documentation>Descriptive data required for a FedEx shipment that is to be held at the destination FedEx location for

pickup by the recipient.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="PhoneNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Contact phone number for recipient of shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LocationContactAndAddress" type="ns:ContactAndAddress" minOccurs="0">

<xs:annotation>

<xs:documentation>Contact and address of FedEx facility at which shipment is to be held.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 129

</xs:element>

<xs:element name="LocationType" type="ns:FedExLocationType" minOccurs="0">

<xs:annotation>

<xs:documentation>Type of facility at which package/shipment is to be held.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LocationId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Location identification (for facilities identified by an alphanumeric location code).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LocationNumber" type="xs:int" minOccurs="0">

<xs:annotation>

<xs:documentation>Location identification (for facilities identified by an numeric location code).</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType HomeDeliveryPremiumDetail

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:HomeDeliveryPremiumType ns:Date ns:PhoneNumber

used by

element

ShipmentSpecialServicesRequested/HomeDeliveryPremiumDetail

annotation

documentation

The descriptive data required by FedEx for home delivery services.

source

<xs:complexType name="HomeDeliveryPremiumDetail">

<xs:annotation>

<xs:documentation>The descriptive data required by FedEx for home delivery services.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 130

<xs:sequence>

<xs:element name="HomeDeliveryPremiumType" type="ns:HomeDeliveryPremiumType"/>

<xs:element name="Date" type="xs:date" minOccurs="0">

<xs:annotation>

<xs:documentation>Required for Date Certain Home Delivery.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PhoneNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Required for Date Certain and Appointment Home Delivery.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>15</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 131

complexType LabelSpecification

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:LabelFormatType ns:ImageType ns:LabelStockType ns:LabelPrintingOrientation ns:LabelRotation ns:PrintedLabelOrigin ns:CustomerSpecifiedDetail

FedEx Web Services, Rate Services 132

used by

element

RequestedShipment/LabelSpecification

annotation

documentation

Description of shipping label to be returned in the reply

source

<xs:complexType name="LabelSpecification">

<xs:annotation>

<xs:documentation>Description of shipping label to be returned in the reply</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="LabelFormatType" type="ns:LabelFormatType" minOccurs="0">

<xs:annotation>

<xs:documentation>Specify type of label to be returned</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ImageType" type="ns:ShippingDocumentImageType" minOccurs="0">

<xs:annotation>

<xs:documentation>

The type of image or printer commands the label is to be formatted in.

DPL = Unimark thermal printer language

EPL2 = Eltron thermal printer language

PDF = a label returned as a pdf image

PNG = a label returned as a png image

ZPLII = Zebra thermal printer language

</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LabelStockType" type="ns:LabelStockType" minOccurs="0">

<xs:annotation>

<xs:documentation>For thermal printer lables this indicates the size of the label and the location of the doc tab if

present.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LabelPrintingOrientation" type="ns:LabelPrintingOrientationType" minOccurs="0">

<xs:annotation>

<xs:documentation>This indicates if the top or bottom of the label comes out of the printer first.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LabelRotation" type="ns:LabelRotationType" minOccurs="0">

<xs:annotation>

<xs:documentation>Relative to normal orientation for the printer. RIGHT=90 degrees clockwise, UPSIDE_DOWN=180

degrees, LEFT=90 degrees counterclockwise.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 133

<xs:element name="PrintedLabelOrigin" type="ns:ContactAndAddress" minOccurs="0">

<xs:annotation>

<xs:documentation>If present, this contact and address information will replace the return address information on the

label.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomerSpecifiedDetail" type="ns:CustomerSpecifiedLabelDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Allows customer-specified control of label content.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType LiabilityCoverageDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:CoverageType ns:CoverageAmount

used by

element

FreightShipmentDetail/LiabilityCoverageDetail

source

<xs:complexType name="LiabilityCoverageDetail">

<xs:sequence>

<xs:element name="CoverageType" type="ns:LiabilityCoverageType" minOccurs="0"/>

<xs:element name="CoverageAmount" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the Liability Coverage Amount. For Jan 2010 this value represents coverage amount per

pound</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 134

complexType LinearMeasure

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Value ns:Units

used by

element

ShippingDocumentFormat/TopOfPageOffset

annotation

documentation

Represents a one-dimensional measurement in small units (e.g. suitable for measuring a package or document), contrasted with Distance, which represents a

large one-dimensional measurement (e.g. distance between cities).

source

<xs:complexType name="LinearMeasure">

<xs:annotation>

<xs:documentation>Represents a one-dimensional measurement in small units (e.g. suitable for measuring a package or

document), contrasted with Distance, which represents a large one-dimensional measurement (e.g. distance between

cities).</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Value" type="xs:decimal" minOccurs="0">

<xs:annotation>

<xs:documentation>The numerical quantity of this measurement.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Units" type="ns:LinearUnits" minOccurs="0">

<xs:annotation>

<xs:documentation>The units for this measurement.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 135

complexType Localization

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:LanguageCode ns:LocaleCode

used by

elements

ClientDetail/Localization EMailNotificationRecipient/Localization ShippingDocumentFormat/Localization TransactionDetail/Localization

CustomerSpecifiedLabelDetail/TermsAndConditionsLocalization

annotation

documentation

Identifies the representation of human-readable text.

source <xs:complexType name="Localization">

<xs:annotation>

<xs:documentation>Identifies the representation of human-readable text.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="LanguageCode" type="xs:string">

<xs:annotation>

<xs:documentation>Two-letter code for language (e.g. EN, FR, etc.)</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LocaleCode" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Two-letter code for the region (e.g. us, ca, etc..).</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType Measure

diagram

namespace

http://fedex.com/ws/rate/v10

FedEx Web Services, Rate Services 136

children

ns:Quantity ns:Units

used by

element

Commodity/AdditionalMeasures

source <xs:complexType name="Measure">

<xs:sequence>

<xs:element name="Quantity" type="xs:decimal" minOccurs="0"/>

<xs:element name="Units" type="xs:string" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType Money

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Currency ns:Amount

used by

elements

RatedShipmentDetail/AdjustedCodCollectionAmount RatedPackageDetail/AdjustedCodCollectionAmount EdtTaxDetail/Amount

RateDiscount/Amount Rebate/Amount Tax/Amount Surcharge/Amount PackageRateDetail/BaseCharge FreightBaseCharge/ChargeRate

CodDetail/CodCollectionAmount LiabilityCoverageDetail/CoverageAmount Commodity/CustomsValue

CustomsClearanceDetail/CustomsValue FreightShipmentDetail/DeclaredValuePerUnit RatedPackageDetail/EffectiveNetDiscount

RatedShipmentDetail/EffectiveNetDiscount FreightBaseCharge/ExtendedAmount VariableHandlingChargeDetail/FixedValue

CommercialInvoice/FreightCharge CommercialInvoice/HandlingCosts CustomsClearanceDetail/InsuranceCharges

RequestedPackageLineItem/InsuredValue PackageRateDetail/NetCharge PackageRateDetail/NetFedExCharge

PackageRateDetail/NetFreight CommercialInvoice/PackingCosts EdtTaxDetail/TaxableValue

CommercialInvoice/TaxesOrMiscellaneousCharge ShipmentRateDetail/TotalBaseCharge VariableHandlingCharges/TotalCustomerCharge

ShipmentRateDetail/TotalDutiesAndTaxes PackageRateDetail/TotalFreightDiscounts ShipmentRateDetail/TotalFreightDiscounts

RequestedShipment/TotalInsuredValue ShipmentRateDetail/TotalNetCharge ShipmentRateDetail/TotalNetChargeWithDutiesAndTaxes

ShipmentRateDetail/TotalNetFedExCharge ShipmentRateDetail/TotalNetFreight ShipmentRateDetail/TotalRebates

PackageRateDetail/TotalRebates ShipmentRateDetail/TotalSurcharges PackageRateDetail/TotalSurcharges PackageRateDetail/TotalTaxes

ShipmentRateDetail/TotalTaxes Commodity/UnitPrice VariableHandlingCharges/VariableHandlingCharge

source

<xs:complexType name="Money">

<xs:sequence>

<xs:element name="Currency" type="xs:string" minOccurs="0"/>

<xs:element name="Amount" type="xs:decimal" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 137

complexType NaftaCertificateOfOriginDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Format ns:BlanketPeriod ns:ImporterSpecification ns:SignatureContact ns:ProducerSpecification ns:Producers ns:CustomerImageUsages

used by element

ShippingDocumentSpecification/NaftaCertificateOfOriginDetail

annotation

documentation

Data required to produce a Certificate of Origin document. Remaining content (business data) to be defined once requirements have been completed.

source

<xs:complexType name="NaftaCertificateOfOriginDetail">

<xs:annotation>

<xs:documentation>Data required to produce a Certificate of Origin document. Remaining content (business data) to be

defined once requirements have been completed.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Format" type="ns:ShippingDocumentFormat" minOccurs="0"/>

<xs:element name="BlanketPeriod" type="ns:DateRange" minOccurs="0"/>

<xs:element name="ImporterSpecification" type="ns:NaftaImporterSpecificationType" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates which Party (if any) from the shipment is to be used as the source of importer data on the

NAFTA COO form.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 138

<xs:element name="SignatureContact" type="ns:Contact" minOccurs="0">

<xs:annotation>

<xs:documentation>Contact information for "Authorized Signature" area of form.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ProducerSpecification" type="ns:NaftaProducerSpecificationType" minOccurs="0"/>

<xs:element name="Producers" type="ns:NaftaProducer" minOccurs="0" maxOccurs="unbounded"/>

<xs:element name="CustomerImageUsages" type="ns:CustomerImageUsage" minOccurs="0" maxOccurs="unbounded"/>

</xs:sequence>

</xs:complexType>

complexType NaftaCommodityDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:PreferenceCriterion ns:ProducerDetermination ns:ProducerId ns:NetCostMethod ns:NetCostDateRange

used by

element

Commodity/NaftaDetail

source

<xs:complexType name="NaftaCommodityDetail">

<xs:sequence>

<xs:element name="PreferenceCriterion" type="ns:NaftaPreferenceCriterionCode" minOccurs="0">

<xs:annotation>

<xs:documentation>Defined by NAFTA regulations.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 139

<xs:element name="ProducerDetermination" type="ns:NaftaProducerDeterminationCode" minOccurs="0">

<xs:annotation>

<xs:documentation>Defined by NAFTA regulations.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ProducerId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identification of which producer is associated with this commodity (if multiple producers are used in a

single shipment).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="NetCostMethod" type="ns:NaftaNetCostMethodCode" minOccurs="0"/>

<xs:element name="NetCostDateRange" type="ns:DateRange" minOccurs="0">

<xs:annotation>

<xs:documentation>Date range over which RVC net cost was calculated.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType NaftaProducer

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Id ns:Producer

used by

element

NaftaCertificateOfOriginDetail/Producers

source

<xs:complexType name="NaftaProducer">

<xs:sequence>

<xs:element name="Id" type="xs:string" minOccurs="0"/>

<xs:element name="Producer" type="ns:Party" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 140

complexType Notification

diagram

FedEx Web Services, Rate Services 141

namespace

http://fedex.com/ws/rate/v10

children

ns:Severity ns:Source ns:Code ns:Message ns:LocalizedMessage ns:MessageParameters

used by elements

CommitDetail/CommitMessages RateReply/Notifications

annotation

documentation

The descriptive data regarding the result of the submitted transaction.

source

<xs:complexType name="Notification">

<xs:annotation>

<xs:documentation>The descriptive data regarding the result of the submitted transaction.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Severity" type="ns:NotificationSeverityType" minOccurs="0">

<xs:annotation>

<xs:documentation>The severity of this notification. This can indicate success or failure or some other information about

the request. The values that can be returned are SUCCESS - Your transaction succeeded with no other applicable information.

NOTE - Additional information that may be of interest to you about your transaction. WARNING - Additional information that you

need to know about your transaction that you may need to take action on. ERROR - Information about an error that occurred while

processing your transaction. FAILURE - FedEx was unable to process your transaction at this time due to a system failure. Please

try again later</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Source" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates the source of this notification. Combined with the Code it uniquely identifies this

notification</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Code" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>A code that represents this notification. Combined with the Source it uniquely identifies this

notification.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Message" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Human-readable text that explains this notification.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LocalizedMessage" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The translated message. The language and locale specified in the ClientDetail. Localization are used

to determine the representation. Currently only supported in a TrackReply.</xs:documentation>

FedEx Web Services, Rate Services 142

</xs:annotation>

</xs:element>

<xs:element name="MessageParameters" type="ns:NotificationParameter" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>A collection of name/value pairs that provide specific data to help the client determine the nature of an

error (or warning, etc.) witout having to parse the message string.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType NotificationParameter

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Id ns:Value

used by

element

Notification/MessageParameters

source

<xs:complexType name="NotificationParameter">

<xs:sequence>

<xs:element name="Id" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the type of data contained in Value (e.g. SERVICE_TYPE, PACKAGE_SEQUENCE,

etc..).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Value" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The value of the parameter (e.g. PRIORITY_OVERNIGHT, 2, etc..).</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 143

</xs:sequence>

</xs:complexType>

complexType Op900Detail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Format ns:Reference ns:CustomerImageUsages ns:SignatureName

used by

element

ShippingDocumentSpecification/Op900Detail

annotation

documentation

The instructions indicating how to print the OP-900 form for hazardous materials packages.

source

<xs:complexType name="Op900Detail">

<xs:annotation>

<xs:documentation>The instructions indicating how to print the OP-900 form for hazardous materials

packages.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Format" type="ns:ShippingDocumentFormat" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies characteristics of a shipping document to be produced.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 144

</xs:element>

<xs:element name="Reference" type="ns:CustomerReferenceType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies which reference type (from the package's customer references) is to be used as the source

for the reference on this OP-900.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomerImageUsages" type="ns:CustomerImageUsage" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Specifies the usage and identification of customer supplied images to be used on this

document.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SignatureName" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Data field to be used when a name is to be printed in the document instead of (or in addition to) a

signature image.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType PackageRateDetail

diagram

FedEx Web Services, Rate Services 145

diagram

FedEx Web Services, Rate Services 146

namespace

http://fedex.com/ws/rate/v10

children

ns:RateType ns:RatedWeightMethod ns:BillingWeight ns:DimWeight ns:OversizeWeight ns:BaseCharge ns:TotalFreightDiscounts ns:NetFreight

ns:TotalSurcharges ns:NetFedExCharge ns:TotalTaxes ns:NetCharge ns:TotalRebates ns:FreightDiscounts ns:Rebates ns:Surcharges ns:Taxes

ns:VariableHandlingCharges

used by

element

RatedPackageDetail/PackageRateDetail

annotation

documentation

Data for a package's rates, as calculated per a specific rate type.

source

<xs:complexType name="PackageRateDetail">

<xs:annotation>

<xs:documentation>Data for a package's rates, as calculated per a specific rate type.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="RateType" type="ns:ReturnedRateType" minOccurs="0">

<xs:annotation>

<xs:documentation>Type used for this specific set of rate data.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RatedWeightMethod" type="ns:RatedWeightMethod" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates which weight was used.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BillingWeight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>The weight that was used to calculate the rate.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DimWeight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>The dimensional weight of this package (if greater than actual).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="OversizeWeight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>The oversize weight of this package (if the package is oversize).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BaseCharge" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The transportation charge only (prior to any discounts applied) for this package.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 147

</xs:element>

<xs:element name="TotalFreightDiscounts" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The sum of all discounts on this package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="NetFreight" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>This package's baseCharge - totalFreightDiscounts.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalSurcharges" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The sum of all surcharges on this package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="NetFedExCharge" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>This package's netFreight + totalSurcharges (not including totalTaxes).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalTaxes" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The sum of all taxes on this package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="NetCharge" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>This package's netFreight + totalSurcharges + totalTaxes.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalRebates" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The total sum of all rebates applied to this package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FreightDiscounts" type="ns:RateDiscount" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>All rate discounts that apply to this package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Rebates" type="ns:Rebate" minOccurs="0" maxOccurs="unbounded">

FedEx Web Services, Rate Services 148

<xs:annotation>

<xs:documentation>All rebates that apply to this package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Surcharges" type="ns:Surcharge" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>All surcharges that apply to this package (either because of characteristics of the package itself, or

because it is carrying per-shipment surcharges for the shipment of which it is a part).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Taxes" type="ns:Tax" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>All taxes applicable (or distributed to) this package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="VariableHandlingCharges" type="ns:VariableHandlingCharges" minOccurs="0">

<xs:annotation>

<xs:documentation>The variable handling charges calculated based on the type variable handling charges

requested.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 149

complexType PackageSpecialServicesRequested

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:SpecialServiceTypes ns:CodDetail ns:DangerousGoodsDetail ns:DryIceWeight ns:SignatureOptionDetail ns:PriorityAlertDetail

used by

element

RequestedPackageLineItem/SpecialServicesRequested

annotation

documentation

These special services are available at the package level for some or all service types. If the shipper is requesting a special service which requires additional

data, the package special service type must be present in the specialServiceTypes collection, and the supporting detail must be provided in the appropriate

sub-object below.

source

<xs:complexType name="PackageSpecialServicesRequested">

FedEx Web Services, Rate Services 150

<xs:annotation>

<xs:documentation>These special services are available at the package level for some or all service types. If the shipper is

requesting a special service which requires additional data, the package special service type must be present in the

specialServiceTypes collection, and the supporting detail must be provided in the appropriate sub-object

below.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="SpecialServiceTypes" type="ns:PackageSpecialServiceType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>The types of all special services requested for the enclosing shipment or package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CodDetail" type="ns:CodDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>For use with FedEx Ground services only; COD must be present in shipment's special

services.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DangerousGoodsDetail" type="ns:DangerousGoodsDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data required for a FedEx shipment containing dangerous materials. This element is

required when SpecialServiceType.DANGEROUS_GOODS or HAZARDOUS_MATERIAL is present in the SpecialServiceTypes

collection.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DryIceWeight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data required for a FedEx shipment containing dry ice. This element is required when

SpecialServiceType.DRY_ICE is present in the SpecialServiceTypes collection.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SignatureOptionDetail" type="ns:SignatureOptionDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>The descriptive data required for FedEx signature services. This element is required when

SpecialServiceType.SIGNATURE_OPTION is present in the SpecialServiceTypes collection.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PriorityAlertDetail" type="ns:PriorityAlertDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>To be filled.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 151

</xs:sequence>

</xs:complexType>

complexType Party

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:AccountNumber ns:Tins ns:Contact ns:Address

used by

elements

CustomsClearanceDetail/Broker CodDetail/CodRecipient CustomsClearanceDetail/ImporterOfRecord NaftaProducer/Producer

RequestedShipment/Recipient RequestedShipment/Shipper

annotation

documentation

The descriptive data for a person or company entitiy doing business with FedEx.

source

<xs:complexType name="Party">

<xs:annotation>

<xs:documentation>The descriptive data for a person or company entitiy doing business with FedEx.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="AccountNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the FedEx account number assigned to the customer.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>12</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="Tins" type="ns:TaxpayerIdentification" minOccurs="0" maxOccurs="unbounded">

FedEx Web Services, Rate Services 152

<xs:annotation>

<xs:documentation>Descriptive data for taxpayer identification information.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Contact" type="ns:Contact" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data identifying the point-of-contact person.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Address" type="ns:Address" minOccurs="0">

<xs:annotation>

<xs:documentation>The descriptive data for a physical location.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType Payment

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:PaymentType ns:Payor

used by

elements

CustomsClearanceDetail/DutiesPayment RequestedShipment/ShippingChargesPayment

annotation

documentation

The descriptive data for the monetary compensation given to FedEx for services rendered to the customer.

source

<xs:complexType name="Payment">

<xs:annotation>

<xs:documentation>The descriptive data for the monetary compensation given to FedEx for services rendered to the

customer.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="PaymentType" type="ns:PaymentType" minOccurs="0">

FedEx Web Services, Rate Services 153

<xs:annotation>

<xs:documentation>Identifies the method of payment for a service. See PaymentType for list of valid enumerated

values.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Payor" type="ns:Payor" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data identifying the party responsible for payment for a service.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType Payor

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:AccountNumber ns:CountryCode

used by

element

Payment/Payor

annotation

documentation

Descriptive data identifying the party responsible for payment for a service.

source

<xs:complexType name="Payor">

<xs:annotation>

<xs:documentation>Descriptive data identifying the party responsible for payment for a service.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="AccountNumber" type="xs:string">

<xs:annotation>

<xs:documentation>Identifies the FedEx account number assigned to the payor.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>12</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

FedEx Web Services, Rate Services 154

</xs:element>

<xs:element name="CountryCode" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the country of the payor.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType PendingShipmentDetail

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:Type ns:ExpirationDate ns:EmailLabelDetail

used by

element

ShipmentSpecialServicesRequested/PendingShipmentDetail

annotation

documentation

This information describes the kind of pending shipment being requested.

source

<xs:complexType name="PendingShipmentDetail">

<xs:annotation>

<xs:documentation>This information describes the kind of pending shipment being requested.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Type" type="ns:PendingShipmentType"/>

<xs:element name="ExpirationDate" type="xs:date" minOccurs="0">

<xs:annotation>

<xs:documentation>Date after which the pending shipment will no longer be available for completion.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="EmailLabelDetail" type="ns:EMailLabelDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Only used with type of EMAIL.</xs:documentation>

FedEx Web Services, Rate Services 155

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType PickupDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:ReadyDateTime ns:LatestPickupDateTime ns:CourierInstructions ns:RequestType ns:RequestSource

used by element

RequestedShipment/PickupDetail

annotation

documentation

This class describes the pickup characteristics of a shipment (e.g. for use in a tag request).

source

<xs:complexType name="PickupDetail">

<xs:annotation>

<xs:documentation>This class describes the pickup characteristics of a shipment (e.g. for use in a tag

request).</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="ReadyDateTime" type="xs:dateTime" minOccurs="0"/>

<xs:element name="LatestPickupDateTime" type="xs:dateTime" minOccurs="0"/>

<xs:element name="CourierInstructions" type="xs:string" minOccurs="0"/>

<xs:element name="RequestType" type="ns:PickupRequestType" minOccurs="0"/>

<xs:element name="RequestSource" type="ns:PickupRequestSourceType" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 156

complexType PriorityAlertDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Content

used by

element

PackageSpecialServicesRequested/PriorityAlertDetail

annotation

documentation

Currently not supported.

source

<xs:complexType name="PriorityAlertDetail">

<xs:annotation>

<xs:documentation>Currently not supported.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Content" type="xs:string" minOccurs="0" maxOccurs="3"/>

</xs:sequence>

</xs:complexType>

complexType RateDiscount

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:RateDiscountType ns:Description ns:Amount ns:Percent

used by

elements

PackageRateDetail/FreightDiscounts ShipmentRateDetail/FreightDiscounts

annotation

documentation

Identifies a discount applied to the shipment.

FedEx Web Services, Rate Services 157

source

<xs:complexType name="RateDiscount">

<xs:annotation>

<xs:documentation>Identifies a discount applied to the shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="RateDiscountType" type="ns:RateDiscountType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the type of discount applied to the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Description" type="xs:string" minOccurs="0"/>

<xs:element name="Amount" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The amount of the discount applied to the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Percent" type="xs:decimal" minOccurs="0">

<xs:annotation>

<xs:documentation>The percentage of the discount applied to the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 158

complexType RatedPackageDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:TrackingIds ns:GroupNumber ns:EffectiveNetDiscount ns:AdjustedCodCollectionAmount ns:OversizeClass ns:PackageRateDetail

used by element

RatedShipmentDetail/RatedPackages

annotation

documentation

If requesting rates using the PackageDetails element (one package at a time) in the request, the rates for each package will be returned in this element. Currently

total piece total weight rates are also retuned in this element.

source

<xs:complexType name="RatedPackageDetail">

<xs:annotation>

<xs:documentation>If requesting rates using the PackageDetails element (one package at a time) in the request, the rates for

each package will be returned in this element. Currently total piece total weight rates are also retuned in this

element.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="TrackingIds" type="ns:TrackingId" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Echoed from the corresponding package in the rate request (if provided).</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 159

</xs:element>

<xs:element name="GroupNumber" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Used with request containing PACKAGE_GROUPS, to identify which group of identical packages was

used to produce a reply item.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="EffectiveNetDiscount" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The difference between "list" and "account" net charge.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="AdjustedCodCollectionAmount" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Ground COD is shipment level.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="OversizeClass" type="ns:OversizeClassType" minOccurs="0"/>

<xs:element name="PackageRateDetail" type="ns:PackageRateDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Rate data that are tied to a specific package and rate type combination.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 160

complexType RatedShipmentDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:EffectiveNetDiscount ns:AdjustedCodCollectionAmount ns:ShipmentRateDetail ns:RatedPackages

used by

element

RateReplyDetail/RatedShipmentDetails

annotation

documentation

This class groups the shipment and package rating data for a specific rate type for use in a rating reply, which groups result data by rate type.

source

<xs:complexType name="RatedShipmentDetail">

<xs:annotation>

<xs:documentation>This class groups the shipment and package rating data for a specific rate type for use in a rating reply,

which groups result data by rate type.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="EffectiveNetDiscount" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The difference between "list" and "account" total net charge.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="AdjustedCodCollectionAmount" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Express COD is shipment level.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ShipmentRateDetail" type="ns:ShipmentRateDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>The shipment-level totals for this rate type.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 161

</xs:element>

<xs:element name="RatedPackages" type="ns:RatedPackageDetail" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>The package-level data for this rate type.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType RateReply

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:HighestSeverity ns:Notifications ns:TransactionDetail ns:Version ns:RateReplyDetails

used by

element

RateReply

annotation

documentation

The response to a RateRequest. The Notifications indicate whether the request was successful or not.

FedEx Web Services, Rate Services 162

source

<xs:complexType name="RateReply">

<xs:annotation>

<xs:documentation>The response to a RateRequest. The Notifications indicate whether the request was successful or

not.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="HighestSeverity" type="ns:NotificationSeverityType">

<xs:annotation>

<xs:documentation>This indicates the highest level of severity of all the notifications returned in this

reply.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Notifications" type="ns:Notification" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>The descriptive data regarding the results of the submitted transaction.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TransactionDetail" type="ns:TransactionDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Contains the CustomerTransactionId that was sent in the request.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Version" type="ns:VersionId">

<xs:annotation>

<xs:documentation>The version of this reply.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RateReplyDetails" type="ns:RateReplyDetail" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Each element contains all rate data for a single service. If service was specified in the request, there

will be a single entry in this array; if service was omitted in the request, there will be a separate entry in this array for each service

being compared.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 163

complexType RateReplyDetail

diagram

FedEx Web Services, Rate Services 164

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:ServiceType ns:PackagingType ns:AppliedOptions ns:AppliedSubOptions ns:DeliveryStation ns:DeliveryDayOfWeek ns:DeliveryTimestamp

ns:CommitDetails ns:DestinationAirportId ns:IneligibleForMoneyBackGuarantee ns:OriginServiceArea ns:DestinationServiceArea ns:TransitTime

ns:MaximumTransitTime ns:SignatureOption ns:ActualRateType ns:RatedShipmentDetails

used by

element

RateReply/RateReplyDetails

source

<xs:complexType name="RateReplyDetail">

<xs:sequence>

<xs:element name="ServiceType" type="ns:ServiceType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the FedEx service to use in shipping the package. See ServiceType for list of valid

enumerated values.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PackagingType" type="ns:PackagingType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the packaging used by the requestor for the package. See PackagingType for list of valid

enumerated values.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="AppliedOptions" type="ns:ServiceOptionType" minOccurs="0" maxOccurs="unbounded">

FedEx Web Services, Rate Services 165

<xs:annotation>

<xs:documentation>Shows the specific combination of service options combined with the service type that produced this

committment in the set returned to the caller.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="AppliedSubOptions" type="ns:ServiceSubOptionDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Supporting detail for applied options identified in preceding field.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DeliveryStation" type="xs:string" minOccurs="0"/>

<xs:element name="DeliveryDayOfWeek" type="ns:DayOfWeekType" minOccurs="0"/>

<xs:element name="DeliveryTimestamp" type="xs:dateTime" minOccurs="0"/>

<xs:element name="CommitDetails" type="ns:CommitDetail" minOccurs="0" maxOccurs="unbounded"/>

<xs:element name="DestinationAirportId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identification of an airport, using standard three-letter abbreviations.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="IneligibleForMoneyBackGuarantee" type="xs:boolean" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates whether or not this shipment is eligible for a money back guarantee.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="OriginServiceArea" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Commitment code for the origin.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DestinationServiceArea" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Commitment code for the destination.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TransitTime" type="ns:TransitTimeType" minOccurs="0">

<xs:annotation>

<xs:documentation>Time in transit from pickup to delivery.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="MaximumTransitTime" type="ns:TransitTimeType" minOccurs="0">

<xs:annotation>

<xs:documentation>Maximum expected transit time</xs:documentation>

FedEx Web Services, Rate Services 166

</xs:annotation>

</xs:element>

<xs:element name="SignatureOption" type="ns:SignatureOptionType" minOccurs="0">

<xs:annotation>

<xs:documentation>The signature option for this package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ActualRateType" type="ns:ReturnedRateType" minOccurs="0">

<xs:annotation>

<xs:documentation>The actual rate type of the charges for this package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RatedShipmentDetails" type="ns:RatedShipmentDetail" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Each element contains all rate data for a single rate type.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 167

complexType RateRequest

diagram

namespace

http://fedex.com/ws/rate/v10

FedEx Web Services, Rate Services 168

children

ns:WebAuthenticationDetail ns:ClientDetail ns:TransactionDetail ns:Version ns:ReturnTransitAndCommit ns:CarrierCodes ns:VariableOptions

ns:RequestedShipment

used by

element

RateRequest

annotation

documentation

Descriptive data sent to FedEx by a customer in order to rate a package/shipment.

source

<xs:complexType name="RateRequest">

<xs:annotation>

<xs:documentation>Descriptive data sent to FedEx by a customer in order to rate a package/shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="WebAuthenticationDetail" type="ns:WebAuthenticationDetail">

<xs:annotation>

<xs:documentation>Descriptive data to be used in authentication of the sender's identity (and right to use FedEx web

services).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ClientDetail" type="ns:ClientDetail">

<xs:annotation>

<xs:documentation>Descriptive data identifying the client submitting the transaction.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TransactionDetail" type="ns:TransactionDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data for this customer transaction. The TransactionDetail from the request is echoed back

to the caller in the corresponding reply.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Version" type="ns:VersionId">

<xs:annotation>

<xs:documentation>Identifies the version/level of a service operation expected by a caller (in each request) and performed

by the callee (in each reply).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ReturnTransitAndCommit" type="xs:boolean" minOccurs="0">

<xs:annotation>

<xs:documentation>Allows the caller to specify that the transit time and commit data are to be returned in the

reply.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CarrierCodes" type="ns:CarrierCodeType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

FedEx Web Services, Rate Services 169

<xs:documentation>Candidate carriers for rate-shopping use case. This field is only considered if

requestedShipment/serviceType is omitted.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="VariableOptions" type="ns:ServiceOptionType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Contains zero or more service options whose combinations are to be considered when replying with

available services.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RequestedShipment" type="ns:RequestedShipment">

<xs:annotation>

<xs:documentation>The shipment for which a rate quote (or rate-shopping comparison) is desired.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType Rebate

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:RebateType ns:Description ns:Amount ns:Percent

used by

elements

PackageRateDetail/Rebates ShipmentRateDetail/Rebates

annotation

documentation

Identifies a discount applied to the shipment.

source

<xs:complexType name="Rebate">

<xs:annotation>

<xs:documentation>Identifies a discount applied to the shipment.</xs:documentation>

FedEx Web Services, Rate Services 170

</xs:annotation>

<xs:sequence>

<xs:element name="RebateType" type="ns:RebateType" minOccurs="0"/>

<xs:element name="Description" type="xs:string" minOccurs="0"/>

<xs:element name="Amount" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The amount of the discount applied to the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Percent" type="xs:decimal" minOccurs="0">

<xs:annotation>

<xs:documentation>The percentage of the discount applied to the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType RecipientCustomsId

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:Type ns:Value

used by

element

CustomsClearanceDetail/RecipientCustomsId

annotation

documentation

Specifies how the recipient is identified for customs purposes; the requirements on this information vary with destination country.

source

<xs:complexType name="RecipientCustomsId">

<xs:annotation>

<xs:documentation>Specifies how the recipient is identified for customs purposes; the requirements on this information vary

with destination country.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Type" type="ns:RecipientCustomsIdType" minOccurs="0">

<xs:annotation>

FedEx Web Services, Rate Services 171

<xs:documentation>Specifies the kind of identification being used.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Value" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Contains the actual ID value, of the type specified above.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType RequestedPackageLineItem

diagram

FedEx Web Services, Rate Services 172

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:SequenceNumber ns:GroupNumber ns:GroupPackageCount ns:VariableHandlingChargeDetail ns:InsuredValue ns:Weight ns:Dimensions

ns:PhysicalPackaging ns:ItemDescription ns:CustomerReferences ns:SpecialServicesRequested ns:ContentRecords

used by

element

RequestedShipment/RequestedPackageLineItems

annotation

documentation

This class rationalizes RequestedPackage and RequestedPackageSummary from previous interfaces. The way in which it is uses within a RequestedShipment

depends on the RequestedPackageDetailType value specified for that shipment.

source

<xs:complexType name="RequestedPackageLineItem">

<xs:annotation>

<xs:documentation>This class rationalizes RequestedPackage and RequestedPackageSummary from previous interfaces. The

way in which it is uses within a RequestedShipment depends on the RequestedPackageDetailType value specified for that

shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="SequenceNumber" type="xs:positiveInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Used only with INDIVIDUAL_PACKAGE, as a unique identifier of each requested

package.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 173

<xs:element name="GroupNumber" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Used only with PACKAGE_GROUPS, as a unique identifier of each group of identical

packages.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="GroupPackageCount" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Used only with PACKAGE_GROUPS, as a count of packages within a group of identical

packages.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="VariableHandlingChargeDetail" type="ns:VariableHandlingChargeDetail" minOccurs="0"/>

<xs:element name="InsuredValue" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Only used for INDIVIDUAL_PACKAGES and PACKAGE_GROUPS. Ignored for

PACKAGE_SUMMARY, in which case totalInsuredValue and packageCount on the shipment will be used to determine this

value.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Weight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>Only used for INDIVIDUAL_PACKAGES and PACKAGE_GROUPS. Ignored for

PACKAGE_SUMMARY, in which case totalweight and packageCount on the shipment will be used to determine this

value.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Dimensions" type="ns:Dimensions" minOccurs="0"/>

<xs:element name="PhysicalPackaging" type="ns:PhysicalPackagingType" minOccurs="0">

<xs:annotation>

<xs:documentation>Provides additional detail on how the customer has physically packaged this item. As of June 2009,

required for packages moving under international and SmartPost services.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ItemDescription" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Human-readable text describing the package.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomerReferences" type="ns:CustomerReference" minOccurs="0" maxOccurs="3"/>

<xs:element name="SpecialServicesRequested" type="ns:PackageSpecialServicesRequested" minOccurs="0"/>

<xs:element name="ContentRecords" type="ns:ContentRecord" minOccurs="0" maxOccurs="unbounded">

FedEx Web Services, Rate Services 174

<xs:annotation>

<xs:documentation>Only used for INDIVIDUAL_PACKAGES and PACKAGE_GROUPS.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType RequestedShipment

diagram

FedEx Web Services, Rate Services 175

diagram

FedEx Web Services, Rate Services 176

diagram

FedEx Web Services, Rate Services 177

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:ShipTimestamp ns:DropoffType ns:ServiceType ns:PackagingType ns:TotalWeight ns:TotalInsuredValue ns:Shipper ns:Recipient

ns:RecipientLocationNumber ns:Origin ns:ShippingChargesPayment ns:SpecialServicesRequested ns:ExpressFreightDetail ns:FreightShipmentDetail

ns:DeliveryInstructions ns:VariableHandlingChargeDetail ns:CustomsClearanceDetail ns:PickupDetail ns:SmartPostDetail ns:BlockInsightVisibility

ns:LabelSpecification ns:ShippingDocumentSpecification ns:RateRequestTypes ns:EdtRequestType ns:PackageCount ns:RequestedPackageLineItems

used by

element

RateRequest/RequestedShipment

annotation

documentation

The descriptive data for the shipment being tendered to FedEx.

source

<xs:complexType name="RequestedShipment">

<xs:annotation>

<xs:documentation>The descriptive data for the shipment being tendered to FedEx.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="ShipTimestamp" type="xs:dateTime" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the date and time the package is tendered to FedEx. Both the date and time portions of the

string are expected to be used. The date should not be a past date or a date more than 10 days in the future. The time is the local

time of the shipment based on the shipper's time zone. The date component must be in the format: YYYY-MM-DD (e.g.

2006-06-26). The time component must be in the format: HH:MM:SS using a 24 hour clock (e.g. 11:00 a.m. is 11:00:00, whereas

5:00 p.m. is 17:00:00). The date and time parts are separated by the letter T (e.g. 2006-06-26T17:00:00). There is also a UTC

offset component indicating the number of hours/mainutes from UTC (e.g 2006-06-26T17:00:00-0400 is defined form June 26,

2006 5:00 pm Eastern Time).</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 178

</xs:element>

<xs:element name="DropoffType" type="ns:DropoffType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the method by which the package is to be tendered to FedEx. This element does not

dispatch a courier for package pickup. See DropoffType for list of valid enumerated values.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ServiceType" type="ns:ServiceType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the FedEx service to use in shipping the package. See ServiceType for list of valid

enumerated values.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PackagingType" type="ns:PackagingType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the packaging used by the requestor for the package. See PackagingType for list of valid

enumerated values.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalWeight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the total weight of the shipment being conveyed to FedEx.This is only applicable to

International shipments and should only be used on the first package of a mutiple piece shipment.This value contains 1 explicit

decimal position</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalInsuredValue" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Total insured amount.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Shipper" type="ns:Party">

<xs:annotation>

<xs:documentation>Descriptive data identifying the party responsible for shipping the package. Shipper and Origin should

have the same address.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Recipient" type="ns:Party">

<xs:annotation>

<xs:documentation>Descriptive data identifying the party receiving the package.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 179

<xs:element name="RecipientLocationNumber" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>A unique identifier for a recipient location</xs:documentation>

<xs:appinfo>

<xs:MaxLength>10</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="Origin" type="ns:ContactAndAddress" minOccurs="0">

<xs:annotation>

<xs:documentation>Physical starting address for the shipment, if different from shipper's address.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ShippingChargesPayment" type="ns:Payment" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data indicating the method and means of payment to FedEx for providing shipping

services.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SpecialServicesRequested" type="ns:ShipmentSpecialServicesRequested" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data regarding special services requested by the shipper for this shipment. If the shipper is

requesting a special service which requires additional data (e.g. COD), the special service type must be present in the

specialServiceTypes collection, and the supporting detail must be provided in the appropriate sub-object. For example, to request

COD, "COD" must be included in the SpecialServiceTypes collection and the CodDetail object must contain the required

data.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ExpressFreightDetail" type="ns:ExpressFreightDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Details specific to an Express freight shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FreightShipmentDetail" type="ns:FreightShipmentDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Data applicable to shipments using FEDEX_FREIGHT and FEDEX_NATIONAL_FREIGHT

services.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DeliveryInstructions" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Used with Ground Home Delivery and Freight.</xs:documentation>

FedEx Web Services, Rate Services 180

</xs:annotation>

</xs:element>

<xs:element name="VariableHandlingChargeDetail" type="ns:VariableHandlingChargeDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Details about how to calculate variable handling charges at the shipment level.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomsClearanceDetail" type="ns:CustomsClearanceDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Customs clearance data, used for both international and intra-country shipping.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PickupDetail" type="ns:PickupDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>For use in "process tag" transaction.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SmartPostDetail" type="ns:SmartPostShipmentDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies the characteristics of a shipment pertaining to SmartPost services.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="BlockInsightVisibility" type="xs:boolean" minOccurs="0">

<xs:annotation>

<xs:documentation>If true, only the shipper/payor will have visibility of this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="LabelSpecification" type="ns:LabelSpecification" minOccurs="0">

<xs:annotation>

<xs:documentation>Details about the image format and printer type the label is to returned in.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ShippingDocumentSpecification" type="ns:ShippingDocumentSpecification" minOccurs="0">

<xs:annotation>

<xs:documentation>Contains data used to create additional (non-label) shipping documents.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RateRequestTypes" type="ns:RateRequestType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Specifies whether and what kind of rates the customer wishes to have quoted on this shipment. The

reply will also be constrained by other data on the shipment and customer.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 181

</xs:element>

<xs:element name="EdtRequestType" type="ns:EdtRequestType" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies whether the customer wishes to have Estimated Duties and Taxes provided with the rate

quotation on this shipment. Only applies with shipments moving under international services.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PackageCount" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>The total number of packages in the entire shipment (even when the shipment spans multiple

transactions.)</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RequestedPackageLineItems" type="ns:RequestedPackageLineItem" minOccurs="0" maxOccurs="999">

<xs:annotation>

<xs:documentation>One or more package-attribute descriptions, each of which describes an individual package, a group

of identical packages, or (for the total-piece-total-weight case) common characteristics all packages in the

shipment.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ReturnEMailDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:MerchantPhoneNumber ns:AllowedSpecialServices

used by element

ReturnShipmentDetail/ReturnEMailDetail

source

<xs:complexType name="ReturnEMailDetail">

<xs:sequence>

FedEx Web Services, Rate Services 182

<xs:element name="MerchantPhoneNumber" type="xs:string" minOccurs="0"/>

<xs:element name="AllowedSpecialServices" type="ns:ReturnEMailAllowedSpecialServiceType" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Identifies the allowed (merchant-authorized) special services which may be selected when the

subsequent shipment is created. Only services represented in EMailLabelAllowedSpecialServiceType will be controlled by this

list.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ReturnShipmentDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:ReturnType ns:Rma ns:ReturnEMailDetail

used by

element

ShipmentSpecialServicesRequested/ReturnShipmentDetail

annotation

documentation

Information relating to a return shipment.

source

<xs:complexType name="ReturnShipmentDetail">

<xs:annotation>

<xs:documentation>Information relating to a return shipment.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 183

<xs:sequence>

<xs:element name="ReturnType" type="ns:ReturnType">

<xs:annotation>

<xs:documentation>The type of return shipment that is being requested. At present the only type of retrun shipment that is

supported is PRINT_RETURN_LABEL. With this option you can print a return label to insert into the box of an outbound shipment.

This option can not be used to print an outbound label.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Rma" type="ns:Rma" minOccurs="0">

<xs:annotation>

<xs:documentation>Return Merchant Authorization</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ReturnEMailDetail" type="ns:ReturnEMailDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Specific information about the delivery of the email and options for the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType Rma

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Number ns:Reason

used by

element

ReturnShipmentDetail/Rma

annotation

documentation

Return Merchant Authorization

source

<xs:complexType name="Rma">

<xs:annotation>

<xs:documentation>Return Merchant Authorization</xs:documentation>

</xs:annotation>

<xs:sequence>

FedEx Web Services, Rate Services 184

<xs:element name="Number" type="xs:string">

<xs:annotation>

<xs:documentation>Return Merchant Authorization Number</xs:documentation>

<xs:appinfo>

<xs:MaxLength>20</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="Reason" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>The reason for the return.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>60</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ServiceSubOptionDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:FreightGuarantee ns:SmartPostHubId ns:SmartPostIndicia

used by elements

CommitDetail/AppliedSubOptions RateReplyDetail/AppliedSubOptions

FedEx Web Services, Rate Services 185

annotation

documentation

Supporting detail for applied options identified in a rate quote.

source

<xs:complexType name="ServiceSubOptionDetail">

<xs:annotation>

<xs:documentation>Supporting detail for applied options identified in a rate quote.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="FreightGuarantee" type="ns:FreightGuaranteeType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the type of Freight Guarantee applied, if FREIGHT_GUARANTEE is applied to the rate

quote.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SmartPostHubId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the smartPostHubId used during rate quote, if SMART_POST_HUB_ID is a variable option

on the rate request.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SmartPostIndicia" type="ns:SmartPostIndiciaType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the indicia used during rate quote, if SMART_POST_ALLOWED_INDICIA is a variable option

on the rate request.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ShipmentDryIceDetail

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:PackageCount ns:TotalWeight

FedEx Web Services, Rate Services 186

used by

element

ShipmentSpecialServicesRequested/ShipmentDryIceDetail

annotation

documentation

Shipment-level totals of dry ice data across all packages.

source

<xs:complexType name="ShipmentDryIceDetail">

<xs:annotation>

<xs:documentation>Shipment-level totals of dry ice data across all packages.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="PackageCount" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>Total number of packages in the shipment that contain dry ice.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalWeight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>Total shipment dry ice weight for all packages.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ShipmentRateDetail

diagram

FedEx Web Services, Rate Services 187

diagram

FedEx Web Services, Rate Services 188

diagram

FedEx Web Services, Rate Services 189

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:RateType ns:RateScale ns:RateZone ns:PricingCode ns:RatedWeightMethod ns:CurrencyExchangeRate ns:SpecialRatingApplied ns:DimDivisor

ns:DimDivisorType ns:FuelSurchargePercent ns:TotalBillingWeight ns:TotalDimWeight ns:TotalBaseCharge ns:TotalFreightDiscounts

ns:TotalNetFreight ns:TotalSurcharges ns:TotalNetFedExCharge ns:TotalTaxes ns:TotalNetCharge ns:TotalRebates ns:TotalDutiesAndTaxes

ns:TotalNetChargeWithDutiesAndTaxes ns:FreightRateDetail ns:FreightDiscounts ns:Rebates ns:Surcharges ns:Taxes ns:DutiesAndTaxes

ns:VariableHandlingCharges ns:TotalVariableHandlingCharges

used by

element

RatedShipmentDetail/ShipmentRateDetail

annotation

documentation

Data for a shipment's total/summary rates, as calculated per a specific rate type. The "total..." fields may differ from the sum of corresponding package data for

Multiweight or Express MPS.

source

<xs:complexType name="ShipmentRateDetail">

<xs:annotation>

<xs:documentation>Data for a shipment's total/summary rates, as calculated per a specific rate type. The "total..." fields may

differ from the sum of corresponding package data for Multiweight or Express MPS.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="RateType" type="ns:ReturnedRateType" minOccurs="0">

<xs:annotation>

<xs:documentation>Type used for this specific set of rate data.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RateScale" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates the rate scale used.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RateZone" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates the rate zone used (based on origin and destination).</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 190

</xs:element>

<xs:element name="PricingCode" type="ns:PricingCodeType" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates the type of pricing used for this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RatedWeightMethod" type="ns:RatedWeightMethod" minOccurs="0">

<xs:annotation>

<xs:documentation>Indicates which weight was used.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CurrencyExchangeRate" type="ns:CurrencyExchangeRate" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies the currency exchange performed on financial amounts for this rate.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SpecialRatingApplied" type="ns:SpecialRatingAppliedType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Indicates which special rating cases applied to this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DimDivisor" type="xs:nonNegativeInteger" minOccurs="0">

<xs:annotation>

<xs:documentation>The value used to calculate the weight based on the dimensions.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DimDivisorType" type="ns:RateDimensionalDivisorType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the type of dim divisor that was applied.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FuelSurchargePercent" type="xs:decimal" minOccurs="0"/>

<xs:element name="TotalBillingWeight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>The weight used to calculate these rates.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalDimWeight" type="ns:Weight" minOccurs="0">

<xs:annotation>

<xs:documentation>Sum of dimensional weights for all packages.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 191

<xs:element name="TotalBaseCharge" type="ns:Money" minOccurs="0"/>

<xs:element name="TotalFreightDiscounts" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The total discounts used in the rate calculation.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalNetFreight" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The freight charge minus discounts.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalSurcharges" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The total amount of all surcharges applied to this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalNetFedExCharge" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>This shipment's totalNetFreight + totalSurcharges (not including totalTaxes).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalTaxes" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Total of the transportation-based taxes.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalNetCharge" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The net charge after applying all discounts and surcharges.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalRebates" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The total sum of all rebates applied to this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="TotalDutiesAndTaxes" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Total of all values under this shipment's dutiesAndTaxes; only provided if estimated duties and taxes

were calculated for this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 192

<xs:element name="TotalNetChargeWithDutiesAndTaxes" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>This shipment's totalNetCharge + totalDutiesAndTaxes; only provided if estimated duties and taxes

were calculated for this shipment AND duties, taxes and transportation charges are all paid by the same sender's

account.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FreightRateDetail" type="ns:FreightRateDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Rate data specific to FedEx Freight and FedEx National Freight services.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FreightDiscounts" type="ns:RateDiscount" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>All rate discounts that apply to this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Rebates" type="ns:Rebate" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>All rebates that apply to this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Surcharges" type="ns:Surcharge" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>All surcharges that apply to this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Taxes" type="ns:Tax" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>All transportation-based taxes applicable to this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="DutiesAndTaxes" type="ns:EdtCommodityTax" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>All commodity-based duties and taxes applicable to this shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="VariableHandlingCharges" type="ns:VariableHandlingCharges" minOccurs="0">

<xs:annotation>

<xs:documentation>The "order level" variable handling charges.</xs:documentation>

</xs:annotation>

</xs:element>

FedEx Web Services, Rate Services 193

<xs:element name="TotalVariableHandlingCharges" type="ns:VariableHandlingCharges" minOccurs="0">

<xs:annotation>

<xs:documentation>The total of all variable handling charges at both shipment (order) and package

level.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ShipmentSpecialServicesRequested

diagram

FedEx Web Services, Rate Services 194

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:SpecialServiceTypes ns:CodDetail ns:HoldAtLocationDetail ns:EMailNotificationDetail ns:ReturnShipmentDetail ns:PendingShipmentDetail

ns:ShipmentDryIceDetail ns:HomeDeliveryPremiumDetail ns:FlatbedTrailerDetail ns:FreightGuaranteeDetail ns:EtdDetail

ns:CustomDeliveryWindowDetail

used by

element

RequestedShipment/SpecialServicesRequested

annotation

documentation

These special services are available at the shipment level for some or all service types. If the shipper is requesting a special service which requires additional

data (such as the COD amount), the shipment special service type must be present in the specialServiceTypes collection, and the supporting detail must be

provided in the appropriate sub-object below.

FedEx Web Services, Rate Services 195

source

<xs:complexType name="ShipmentSpecialServicesRequested">

<xs:annotation>

<xs:documentation>These special services are available at the shipment level for some or all service types. If the shipper is

requesting a special service which requires additional data (such as the COD amount), the shipment special service type must be

present in the specialServiceTypes collection, and the supporting detail must be provided in the appropriate sub-object

below.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="SpecialServiceTypes" type="ns:ShipmentSpecialServiceType" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>The types of all special services requested for the enclosing shipment (or other shipment-level

transaction).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CodDetail" type="ns:CodDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data required for a FedEx COD (Collect-On-Delivery) shipment. This element is required

when SpecialServiceType.COD is present in the SpecialServiceTypes collection.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="HoldAtLocationDetail" type="ns:HoldAtLocationDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data required for a FedEx shipment that is to be held at the destination FedEx location for

pickup by the recipient. This element is required when SpecialServiceType.HOLD_AT_LOCATION is present in the

SpecialServiceTypes collection.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="EMailNotificationDetail" type="ns:EMailNotificationDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Descriptive data required for FedEx to provide email notification to the customer regarding the

shipment. This element is required when SpecialServiceType.EMAIL_NOTIFICATION is present in the SpecialServiceTypes

collection.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ReturnShipmentDetail" type="ns:ReturnShipmentDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>The descriptive data required for FedEx Printed Return Label. This element is required when

SpecialServiceType.PRINTED_RETURN_LABEL is present in the SpecialServiceTypes collection</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PendingShipmentDetail" type="ns:PendingShipmentDetail" minOccurs="0">

<xs:annotation>

FedEx Web Services, Rate Services 196

<xs:documentation>This field should be populated for pending shipments (e.g. e-mail label) It is required by a

PENDING_SHIPMENT special service type.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ShipmentDryIceDetail" type="ns:ShipmentDryIceDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>The number of packages with dry ice and the total weight of the dry ice.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="HomeDeliveryPremiumDetail" type="ns:HomeDeliveryPremiumDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>The descriptive data required for FedEx Home Delivery options. This element is required when

SpecialServiceType.HOME_DELIVERY_PREMIUM is present in the SpecialServiceTypes collection</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="FlatbedTrailerDetail" type="ns:FlatbedTrailerDetail" minOccurs="0"/>

<xs:element name="FreightGuaranteeDetail" type="ns:FreightGuaranteeDetail" minOccurs="0"/>

<xs:element name="EtdDetail" type="ns:EtdDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Electronic Trade document references.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomDeliveryWindowDetail" type="ns:CustomDeliveryWindowDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Specification for date or range of dates on which delivery is to be attempted.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 197

complexType ShippingDocumentDispositionDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:DispositionType ns:Grouping ns:EMailDetail ns:PrintDetail

used by

element

ShippingDocumentFormat/Dispositions

annotation

documentation

Each occurrence of this class specifies a particular way in which a kind of shipping document is to be produced and provided.

source

<xs:complexType name="ShippingDocumentDispositionDetail">

<xs:annotation>

<xs:documentation>Each occurrence of this class specifies a particular way in which a kind of shipping document is to be

produced and provided.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="DispositionType" type="ns:ShippingDocumentDispositionType" minOccurs="0">

<xs:annotation>

<xs:documentation>Values in this field specify how to create and return the document.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Grouping" type="ns:ShippingDocumentGroupingType" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies how to organize all documents of this type.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="EMailDetail" type="ns:ShippingDocumentEMailDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies how to e-mail document images.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 198

</xs:element>

<xs:element name="PrintDetail" type="ns:ShippingDocumentPrintDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies how a queued document is to be printed.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ShippingDocumentEMailDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:EMailRecipients ns:Grouping

used by

element

ShippingDocumentDispositionDetail/EMailDetail

annotation

documentation

Specifies how to e-mail shipping documents.

source

<xs:complexType name="ShippingDocumentEMailDetail">

<xs:annotation>

<xs:documentation>Specifies how to e-mail shipping documents.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="EMailRecipients" type="ns:ShippingDocumentEMailRecipient" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Provides the roles and email addresses for e-mail recipients.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Grouping" type="ns:ShippingDocumentEMailGroupingType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the convention by which documents are to be grouped as e-mail

attachments.</xs:documentation>

FedEx Web Services, Rate Services 199

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ShippingDocumentEMailRecipient

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:RecipientType ns:Address

used by

element

ShippingDocumentEMailDetail/EMailRecipients

annotation

documentation

Specifies an individual recipient of e-mailed shipping document(s).

source

<xs:complexType name="ShippingDocumentEMailRecipient">

<xs:annotation>

<xs:documentation>Specifies an individual recipient of e-mailed shipping document(s).</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="RecipientType" type="ns:EMailNotificationRecipientType" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the relationship of this recipient in the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Address" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Address to which the document is to be sent.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 200

complexType ShippingDocumentFormat

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Dispositions ns:TopOfPageOffset ns:ImageType ns:StockType ns:ProvideInstructions ns:Localization

used by

elements

CertificateOfOriginDetail/DocumentFormat CommercialInvoiceDetail/Format CustomDocumentDetail/Format

GeneralAgencyAgreementDetail/Format NaftaCertificateOfOriginDetail/Format Op900Detail/Format

annotation

documentation

Specifies characteristics of a shipping document to be produced.

source

<xs:complexType name="ShippingDocumentFormat">

<xs:annotation>

<xs:documentation>Specifies characteristics of a shipping document to be produced.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Dispositions" type="ns:ShippingDocumentDispositionDetail" minOccurs="0" maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Specifies how to create, organize, and return the document.</xs:documentation>

FedEx Web Services, Rate Services 201

</xs:annotation>

</xs:element>

<xs:element name="TopOfPageOffset" type="ns:LinearMeasure" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies how far down the page to move the beginning of the image; allows for printing on letterhead

and other pre-printed stock.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="ImageType" type="ns:ShippingDocumentImageType" minOccurs="0"/>

<xs:element name="StockType" type="ns:ShippingDocumentStockType" minOccurs="0"/>

<xs:element name="ProvideInstructions" type="xs:boolean" minOccurs="0">

<xs:annotation>

<xs:documentation>For those shipping document types which have both a "form" and "instructions" component (e.g.

NAFTA Certificate of Origin and General Agency Agreement), this field indicates whether to provide the

instructions.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Localization" type="ns:Localization" minOccurs="0">

<xs:annotation>

<xs:documentation>Governs the language to be used for this individual document, independently from other content

returned for the same shipment.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ShippingDocumentPrintDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:PrinterId

used by

element

ShippingDocumentDispositionDetail/PrintDetail

annotation

documentation

Specifies printing options for a shipping document.

source

<xs:complexType name="ShippingDocumentPrintDetail">

<xs:annotation>

FedEx Web Services, Rate Services 202

<xs:documentation>Specifies printing options for a shipping document.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="PrinterId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Provides environment-specific printer identification.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType ShippingDocumentSpecification

diagram

FedEx Web Services, Rate Services 203

namespace

http://fedex.com/ws/rate/v10

children

ns:ShippingDocumentTypes ns:CertificateOfOrigin ns:CommercialInvoiceDetail ns:CustomPackageDocumentDetail

ns:CustomShipmentDocumentDetail ns:GeneralAgencyAgreementDetail ns:NaftaCertificateOfOriginDetail ns:Op900Detail

used by

element

RequestedShipment/ShippingDocumentSpecification

annotation

documentation

Contains all data required for additional (non-label) shipping documents to be produced in conjunction with a specific shipment.

source

<xs:complexType name="ShippingDocumentSpecification">

<xs:annotation>

<xs:documentation>Contains all data required for additional (non-label) shipping documents to be produced in conjunction with

a specific shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="ShippingDocumentTypes" type="ns:RequestedShippingDocumentType" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Indicates the types of shipping documents requested by the shipper.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CertificateOfOrigin" type="ns:CertificateOfOriginDetail" minOccurs="0"/>

<xs:element name="CommercialInvoiceDetail" type="ns:CommercialInvoiceDetail" minOccurs="0"/>

<xs:element name="CustomPackageDocumentDetail" type="ns:CustomDocumentDetail" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Specifies the production of each package-level custom document (the same specification is used for all

packages).</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="CustomShipmentDocumentDetail" type="ns:CustomDocumentDetail" minOccurs="0"

maxOccurs="unbounded">

<xs:annotation>

<xs:documentation>Specifies the production of a shipment-level custom document.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="GeneralAgencyAgreementDetail" type="ns:GeneralAgencyAgreementDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Details pertaining to the GAA.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="NaftaCertificateOfOriginDetail" type="ns:NaftaCertificateOfOriginDetail" minOccurs="0">

<xs:annotation>

<xs:documentation>Details pertaining to NAFTA COO.</xs:documentation>

FedEx Web Services, Rate Services 204

</xs:annotation>

</xs:element>

<xs:element name="Op900Detail" type="ns:Op900Detail" minOccurs="0">

<xs:annotation>

<xs:documentation>Specifies the production of the OP-900 document for hazardous materials

packages.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType SignatureOptionDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:OptionType ns:SignatureReleaseNumber

used by element

PackageSpecialServicesRequested/SignatureOptionDetail

annotation

documentation

The descriptive data required for FedEx delivery signature services.

source

<xs:complexType name="SignatureOptionDetail">

<xs:annotation>

<xs:documentation>The descriptive data required for FedEx delivery signature services.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="OptionType" type="ns:SignatureOptionType">

<xs:annotation>

<xs:documentation>Identifies the delivery signature services option selected by the customer for this shipment. See

OptionType for the list of valid values.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="SignatureReleaseNumber" type="xs:string" minOccurs="0">

FedEx Web Services, Rate Services 205

<xs:annotation>

<xs:documentation>Identifies the delivery signature release authorization number.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>10</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType SmartPostShipmentDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Indicia ns:AncillaryEndorsement ns:HubId ns:CustomerManifestId

used by

element

RequestedShipment/SmartPostDetail

annotation

documentation

Data required for shipments handled under the SMART_POST and GROUND_SMART_POST service types.

source

<xs:complexType name="SmartPostShipmentDetail">

<xs:annotation>

<xs:documentation>Data required for shipments handled under the SMART_POST and GROUND_SMART_POST service

types.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Indicia" type="ns:SmartPostIndiciaType" minOccurs="0"/>

<xs:element name="AncillaryEndorsement" type="ns:SmartPostAncillaryEndorsementType" minOccurs="0"/>

<xs:element name="HubId" type="xs:string" minOccurs="0"/>

<xs:element name="CustomerManifestId" type="xs:string" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 206

complexType Surcharge

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:SurchargeType ns:Level ns:Description ns:Amount

used by

elements

PackageRateDetail/Surcharges ShipmentRateDetail/Surcharges

annotation

documentation

Identifies each surcharge applied to the shipment.

source

<xs:complexType name="Surcharge">

<xs:annotation>

<xs:documentation>Identifies each surcharge applied to the shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="SurchargeType" type="ns:SurchargeType" minOccurs="0">

<xs:annotation>

<xs:documentation>The type of surcharge applied to the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Level" type="ns:SurchargeLevelType" minOccurs="0"/>

<xs:element name="Description" type="xs:string" minOccurs="0"/>

<xs:element name="Amount" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The amount of the surcharge applied to the shipment.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 207

complexType Tax

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:TaxType ns:Description ns:Amount

used by

elements

PackageRateDetail/Taxes ShipmentRateDetail/Taxes

annotation

documentation

Identifies each tax applied to the shipment.

source

<xs:complexType name="Tax">

<xs:annotation>

<xs:documentation>Identifies each tax applied to the shipment.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="TaxType" type="ns:TaxType" minOccurs="0"/>

<xs:element name="Description" type="xs:string" minOccurs="0"/>

<xs:element name="Amount" type="ns:Money" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

complexType TaxpayerIdentification

diagram

namespace

http://fedex.com/ws/rate/v10

FedEx Web Services, Rate Services 208

children

ns:TinType ns:Number ns:Usage

used by

element

Party/Tins

annotation documentation

The descriptive data for taxpayer identification information.

source

<xs:complexType name="TaxpayerIdentification">

<xs:annotation>

<xs:documentation>The descriptive data for taxpayer identification information.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="TinType" type="ns:TinType">

<xs:annotation>

<xs:documentation>Identifies the category of the taxpayer identification number. See TinType for the list of

values.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Number" type="xs:string">

<xs:annotation>

<xs:documentation>Identifies the taxpayer identification number.</xs:documentation>

<xs:appinfo>

<xs:MaxLength>18</xs:MaxLength>

</xs:appinfo>

</xs:annotation>

</xs:element>

<xs:element name="Usage" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Identifies the usage of Tax Identification Number in Shipment processing</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType TrackingId

diagram

FedEx Web Services, Rate Services 209

namespace

http://fedex.com/ws/rate/v10

children

ns:TrackingIdType ns:FormId ns:TrackingNumber

used by element

RatedPackageDetail/TrackingIds

source

<xs:complexType name="TrackingId">

<xs:sequence>

<xs:element name="TrackingIdType" type="ns:TrackingIdType" minOccurs="0"/>

<xs:element name="FormId" type="xs:string" minOccurs="0"/>

<xs:element name="TrackingNumber" type="xs:string"/>

</xs:sequence>

</xs:complexType>

complexType TransactionDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:CustomerTransactionId ns:Localization

used by elements

RateReply/TransactionDetail RateRequest/TransactionDetail

annotation

documentation

Descriptive data for this customer transaction. The TransactionDetail from the request is echoed back to the caller in the corresponding reply.

source

<xs:complexType name="TransactionDetail">

<xs:annotation>

<xs:documentation>Descriptive data for this customer transaction. The TransactionDetail from the request is echoed back to

the caller in the corresponding reply.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="CustomerTransactionId" type="xs:string" minOccurs="0">

<xs:annotation>

<xs:documentation>Free form text to be echoed back in the reply. Used to match requests and

FedEx Web Services, Rate Services 210

replies.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Localization" type="ns:Localization" minOccurs="0">

<xs:annotation>

<xs:documentation>Governs data payload language/translations (contrasted with ClientDetail.localization, which governs

Notification.localizedMessage language selection).</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType UploadDocumentDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:LineNumber ns:CustomerReference ns:DocumentProducer ns:DocumentType ns:FileName ns:DocumentContent

used by

element

EtdDetail/Documents

source

<xs:complexType name="UploadDocumentDetail">

<xs:sequence>

<xs:element name="LineNumber" type="xs:nonNegativeInteger" minOccurs="0"/>

<xs:element name="CustomerReference" type="xs:string" minOccurs="0"/>

<xs:element name="DocumentProducer" type="ns:UploadDocumentProducerType" minOccurs="0"/>

<xs:element name="DocumentType" type="ns:UploadDocumentType" minOccurs="0"/>

<xs:element name="FileName" type="xs:string" minOccurs="0"/>

<xs:element name="DocumentContent" type="xs:base64Binary" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 211

complexType UploadDocumentReferenceDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:LineNumber ns:CustomerReference ns:DocumentProducer ns:DocumentType ns:DocumentId ns:DocumentIdProducer

used by

element

EtdDetail/DocumentReferences

source

<xs:complexType name="UploadDocumentReferenceDetail">

<xs:sequence>

<xs:element name="LineNumber" type="xs:nonNegativeInteger" minOccurs="0"/>

<xs:element name="CustomerReference" type="xs:string" minOccurs="0"/>

<xs:element name="DocumentProducer" type="ns:UploadDocumentProducerType" minOccurs="0"/>

<xs:element name="DocumentType" type="ns:UploadDocumentType" minOccurs="0"/>

<xs:element name="DocumentId" type="xs:string" minOccurs="0"/>

<xs:element name="DocumentIdProducer" type="ns:UploadDocumentIdProducer" minOccurs="0"/>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 212

complexType VariableHandlingChargeDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:FixedValue ns:PercentValue ns:RateElementBasis ns:RateTypeBasis

used by

elements

RequestedPackageLineItem/VariableHandlingChargeDetail RequestedShipment/VariableHandlingChargeDetail

annotation

documentation

This definition of variable handling charge detail is intended for use in Jan 2011 corp load.

source

<xs:complexType name="VariableHandlingChargeDetail">

<xs:annotation>

<xs:documentation>This definition of variable handling charge detail is intended for use in Jan 2011 corp

load.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="FixedValue" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>Used with Variable handling charge type of FIXED_VALUE. Contains the amount to be added to the

freight charge. Contains 2 explicit decimal positions with a total max length of 10 including the decimal.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="PercentValue" type="xs:decimal" minOccurs="0">

<xs:annotation>

<xs:documentation>Actual percentage (10 means 10%, which is a mutiplier of 0.1)</xs:documentation>

FedEx Web Services, Rate Services 213

</xs:annotation>

</xs:element>

<xs:element name="RateElementBasis" type="ns:RateElementBasisType" minOccurs="0">

<xs:annotation>

<xs:documentation>Select the value from a set of rate data to which the percentage is applied.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="RateTypeBasis" type="ns:RateTypeBasisType" minOccurs="0">

<xs:annotation>

<xs:documentation>Select the type of rate from which the element is to be selected.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType VariableHandlingCharges

diagram

namespace

http://fedex.com/ws/rate/v10

children ns:VariableHandlingCharge ns:TotalCustomerCharge

used by

elements

ShipmentRateDetail/TotalVariableHandlingCharges PackageRateDetail/VariableHandlingCharges

ShipmentRateDetail/VariableHandlingCharges

annotation

documentation

The variable handling charges calculated based on the type variable handling charges requested.

source

<xs:complexType name="VariableHandlingCharges">

<xs:annotation>

<xs:documentation>The variable handling charges calculated based on the type variable handling charges

requested.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="VariableHandlingCharge" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The variable handling charge amount calculated based on the requested variable handling charge

detail.</xs:documentation>

FedEx Web Services, Rate Services 214

</xs:annotation>

</xs:element>

<xs:element name="TotalCustomerCharge" type="ns:Money" minOccurs="0">

<xs:annotation>

<xs:documentation>The calculated varibale handling charge plus the net charge.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType VersionId

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:ServiceId ns:Major ns:Intermediate ns:Minor

used by

elements

RateReply/Version RateRequest/Version

annotation

documentation

Identifies the version/level of a service operation expected by a caller (in each request) and performed by the callee (in each reply).

source

<xs:complexType name="VersionId">

<xs:annotation>

<xs:documentation>Identifies the version/level of a service operation expected by a caller (in each request) and performed by

the callee (in each reply).</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="ServiceId" type="xs:string" fixed="crs">

<xs:annotation>

FedEx Web Services, Rate Services 215

<xs:documentation>Identifies a system or sub-system which performs an operation.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Major" type="xs:int" fixed="10">

<xs:annotation>

<xs:documentation>Identifies the service business level.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Intermediate" type="xs:int" fixed="0">

<xs:annotation>

<xs:documentation>Identifies the service interface level.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Minor" type="xs:int" fixed="0">

<xs:annotation>

<xs:documentation>Identifies the service code level.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType Volume

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:Units ns:Value

used by

element

FreightShipmentLineItem/Volume

annotation

documentation

Three-dimensional volume/cubic measurement.

source

<xs:complexType name="Volume">

<xs:annotation>

<xs:documentation>Three-dimensional volume/cubic measurement.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Units" type="ns:VolumeUnits" minOccurs="0"/>

<xs:element name="Value" type="xs:decimal" minOccurs="0"/>

FedEx Web Services, Rate Services 216

</xs:sequence>

</xs:complexType>

complexType WebAuthenticationCredential

diagram

namespace http://fedex.com/ws/rate/v10

children

ns:Key ns:Password

used by

element

WebAuthenticationDetail/UserCredential

annotation

documentation

Two part authentication string used for the sender's identity

source

<xs:complexType name="WebAuthenticationCredential">

<xs:annotation>

<xs:documentation>Two part authentication string used for the sender's identity</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Key" type="xs:string">

<xs:annotation>

<xs:documentation>Identifying part of authentication credential. This value is provided by FedEx after

registration</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Password" type="xs:string">

<xs:annotation>

<xs:documentation>Secret part of authentication key. This value is provided by FedEx after

registration.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

FedEx Web Services, Rate Services 217

complexType WebAuthenticationDetail

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:UserCredential

used by element

RateRequest/WebAuthenticationDetail

annotation

documentation

Used in authentication of the sender's identity.

source

<xs:complexType name="WebAuthenticationDetail">

<xs:annotation>

<xs:documentation>Used in authentication of the sender's identity.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="UserCredential" type="ns:WebAuthenticationCredential">

<xs:annotation>

<xs:documentation>Credential used to authenticate a specific software application. This value is provided by FedEx after

registration.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

complexType Weight

diagram

namespace

http://fedex.com/ws/rate/v10

children

ns:Units ns:Value

used by

elements

PackageRateDetail/BillingWeight PackageRateDetail/DimWeight PackageSpecialServicesRequested/DryIceWeight

PackageRateDetail/OversizeWeight FreightShipmentDetail/PalletWeight ShipmentRateDetail/TotalBillingWeight

FedEx Web Services, Rate Services 218

ShipmentRateDetail/TotalDimWeight RequestedShipment/TotalWeight ShipmentDryIceDetail/TotalWeight Commodity/Weight

FreightBaseCharge/Weight FreightShipmentLineItem/Weight RequestedPackageLineItem/Weight

annotation

documentation

The descriptive data for the heaviness of an object.

source

<xs:complexType name="Weight">

<xs:annotation>

<xs:documentation>The descriptive data for the heaviness of an object.</xs:documentation>

</xs:annotation>

<xs:sequence>

<xs:element name="Units" type="ns:WeightUnits">

<xs:annotation>

<xs:documentation>Identifies the unit of measure associated with a weight value.</xs:documentation>

</xs:annotation>

</xs:element>

<xs:element name="Value" type="xs:decimal">

<xs:annotation>

<xs:documentation>Identifies the weight value of a package/shipment.</xs:documentation>

</xs:annotation>

</xs:element>

</xs:sequence>

</xs:complexType>

simpleType AdditionalLabelsType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

AdditionalLabelsDetail/Type

facets

Kind

Value

annotation

enumeration

BROKER

enumeration

CONSIGNEE

enumeration

CUSTOMS

enumeration

DESTINATION

enumeration

MANIFEST

enumeration

ORIGIN

enumeration

RECIPIENT

enumeration

SHIPPER

annotation

documentation

Identifies the type of additional labels.

source <xs:simpleType name="AdditionalLabelsType">

FedEx Web Services, Rate Services 219

<xs:annotation>

<xs:documentation>Identifies the type of additional labels.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BROKER"/>

<xs:enumeration value="CONSIGNEE"/>

<xs:enumeration value="CUSTOMS"/>

<xs:enumeration value="DESTINATION"/>

<xs:enumeration value="MANIFEST"/>

<xs:enumeration value="ORIGIN"/>

<xs:enumeration value="RECIPIENT"/>

<xs:enumeration value="SHIPPER"/>

</xs:restriction>

</xs:simpleType>

simpleType B13AFilingOptionType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ExportDetail/B13AFilingOption

facets Kind

Value

annotation

enumeration

FILED_ELECTRONICALLY

enumeration

MANUALLY_ATTACHED

enumeration

NOT_REQUIRED

enumeration

SUMMARY_REPORTING

annotation

documentation

Specifies which filing option is being exercised by the customer.

Required for non-document shipments originating in Canada destined for any country other than Canada, the United States, Puerto Rico or the U.S.

Virgin Islands.

source

<xs:simpleType name="B13AFilingOptionType">

<xs:annotation>

<xs:documentation>

Specifies which filing option is being exercised by the customer.

Required for non-document shipments originating in Canada destined for any country other than Canada, the United

States, Puerto Rico or the U.S. Virgin Islands.

</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

FedEx Web Services, Rate Services 220

<xs:enumeration value="FILED_ELECTRONICALLY"/>

<xs:enumeration value="MANUALLY_ATTACHED"/>

<xs:enumeration value="NOT_REQUIRED"/>

<xs:enumeration value="SUMMARY_REPORTING"/>

</xs:restriction>

</xs:simpleType>

simpleType BarcodeSymbologyType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

CustomLabelBarcodeEntry/BarcodeSymbology DocTabContentBarcoded/Symbology

facets

Kind

Value

annotation

enumeration

CODABAR

enumeration

CODE128

enumeration

CODE128B

enumeration

CODE128C

enumeration

CODE39

enumeration

CODE93

enumeration

I2OF5

enumeration

MANUAL

enumeration

PDF417

enumeration

POSTNET

enumeration

UCC128

annotation

documentation

Identification of the type of barcode (symbology) used on FedEx documents and labels.

source

<xs:simpleType name="BarcodeSymbologyType">

<xs:annotation>

<xs:documentation>Identification of the type of barcode (symbology) used on FedEx documents and

labels.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CODABAR"/>

<xs:enumeration value="CODE128"/>

<xs:enumeration value="CODE128B"/>

<xs:enumeration value="CODE128C"/>

<xs:enumeration value="CODE39"/>

<xs:enumeration value="CODE93"/>

FedEx Web Services, Rate Services 221

<xs:enumeration value="I2OF5"/>

<xs:enumeration value="MANUAL"/>

<xs:enumeration value="PDF417"/>

<xs:enumeration value="POSTNET"/>

<xs:enumeration value="UCC128"/>

</xs:restriction>

</xs:simpleType>

simpleType CarrierCodeType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

RateRequest/CarrierCodes

facets

Kind

Value

annotation

enumeration

FDXC

enumeration

FDXE

enumeration

FDXG

enumeration

FXCC

enumeration

FXFR

enumeration

FXSP

annotation documentation

Identification of a FedEx operating company (transportation).

source

<xs:simpleType name="CarrierCodeType">

<xs:annotation>

<xs:documentation>Identification of a FedEx operating company (transportation).</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="FDXC"/>

<xs:enumeration value="FDXE"/>

<xs:enumeration value="FDXG"/>

<xs:enumeration value="FXCC"/>

<xs:enumeration value="FXFR"/>

<xs:enumeration value="FXSP"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 222

simpleType ChargeBasisLevelType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CodAddTransportationChargesDetail/ChargeBasisLevel

facets

Kind

Value

annotation

enumeration

CURRENT_PACKAGE

enumeration

SUM_OF_PACKAGES

source <xs:simpleType name="ChargeBasisLevelType">

<xs:restriction base="xs:string">

<xs:enumeration value="CURRENT_PACKAGE"/>

<xs:enumeration value="SUM_OF_PACKAGES"/>

</xs:restriction>

</xs:simpleType>

simpleType ClearanceBrokerageType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CustomsClearanceDetail/ClearanceBrokerage

facets

Kind

Value

annotation

enumeration

BROKER_INCLUSIVE

enumeration

BROKER_INCLUSIVE_NON_RESIDENT_IMPORTER

enumeration

BROKER_SELECT

enumeration

BROKER_SELECT_NON_RESIDENT_IMPORTER

enumeration

BROKER_UNASSIGNED

annotation

documentation

Specifies the type of brokerage to be applied to a shipment.

source

<xs:simpleType name="ClearanceBrokerageType">

<xs:annotation>

<xs:documentation>Specifies the type of brokerage to be applied to a shipment.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BROKER_INCLUSIVE"/>

<xs:enumeration value="BROKER_INCLUSIVE_NON_RESIDENT_IMPORTER"/>

<xs:enumeration value="BROKER_SELECT"/>

<xs:enumeration value="BROKER_SELECT_NON_RESIDENT_IMPORTER"/>

<xs:enumeration value="BROKER_UNASSIGNED"/>

FedEx Web Services, Rate Services 223

</xs:restriction>

</xs:simpleType>

simpleType CodAddTransportationChargeBasisType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CodAddTransportationChargesDetail/ChargeBasis

facets Kind

Value

annotation

enumeration

COD_SURCHARGE

enumeration

NET_CHARGE

enumeration

NET_FREIGHT

enumeration

TOTAL_CUSTOMER_CHARGE

source

<xs:simpleType name="CodAddTransportationChargeBasisType">

<xs:restriction base="xs:string">

<xs:enumeration value="COD_SURCHARGE"/>

<xs:enumeration value="NET_CHARGE"/>

<xs:enumeration value="NET_FREIGHT"/>

<xs:enumeration value="TOTAL_CUSTOMER_CHARGE"/>

</xs:restriction>

</xs:simpleType>

simpleType CodCollectionType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CodDetail/CollectionType

facets

Kind

Value

annotation

enumeration

ANY

enumeration

CASH

enumeration

GUARANTEED_FUNDS

annotation

documentation

Identifies the type of funds FedEx should collect upon shipment delivery.

source

<xs:simpleType name="CodCollectionType">

<xs:annotation>

<xs:documentation>Identifies the type of funds FedEx should collect upon shipment delivery.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 224

<xs:restriction base="xs:string">

<xs:enumeration value="ANY"/>

<xs:enumeration value="CASH"/>

<xs:enumeration value="GUARANTEED_FUNDS"/>

</xs:restriction>

</xs:simpleType>

simpleType CodReturnReferenceIndicatorType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CodDetail/ReferenceIndicator

facets

Kind

Value

annotation

enumeration

INVOICE

enumeration

REFERENCE

enumeration

TRACKING

annotation

documentation

Indicates which type of reference information to include on the COD return shipping label.

source

<xs:simpleType name="CodReturnReferenceIndicatorType">

<xs:annotation>

<xs:documentation>Indicates which type of reference information to include on the COD return shipping

label.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="INVOICE"/>

<xs:enumeration value="PO"/>

<xs:enumeration value="REFERENCE"/>

<xs:enumeration value="TRACKING"/>

</xs:restriction>

</xs:simpleType>

simpleType CommitmentDelayType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

DelayDetail/Type

FedEx Web Services, Rate Services 225

facets

Kind

Value

annotation

enumeration

HOLIDAY

enumeration

NON_WORKDAY

enumeration

NO_CITY_DELIVERY

enumeration

NO_HOLD_AT_LOCATION

enumeration

NO_LOCATION_DELIVERY

enumeration

NO_SERVICE_AREA_DELIVERY

enumeration

NO_SERVICE_AREA_SPECIAL_SERVICE_DELIVERY

enumeration

NO_SPECIAL_SERVICE_DELIVERY

enumeration

NO_ZIP_DELIVERY

enumeration

WEEKEND

enumeration

WEEKEND_SPECIAL

annotation

documentation

The type of delay this shipment will encounter.

source

<xs:simpleType name="CommitmentDelayType">

<xs:annotation>

<xs:documentation>The type of delay this shipment will encounter.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="HOLIDAY"/>

<xs:enumeration value="NON_WORKDAY"/>

<xs:enumeration value="NO_CITY_DELIVERY"/>

<xs:enumeration value="NO_HOLD_AT_LOCATION"/>

<xs:enumeration value="NO_LOCATION_DELIVERY"/>

<xs:enumeration value="NO_SERVICE_AREA_DELIVERY"/>

<xs:enumeration value="NO_SERVICE_AREA_SPECIAL_SERVICE_DELIVERY"/>

<xs:enumeration value="NO_SPECIAL_SERVICE_DELIVERY"/>

<xs:enumeration value="NO_ZIP_DELIVERY"/>

<xs:enumeration value="WEEKEND"/>

<xs:enumeration value="WEEKEND_SPECIAL"/>

</xs:restriction>

</xs:simpleType>

simpleType CustomDeliveryWindowType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by element

CustomDeliveryWindowDetail/Type

FedEx Web Services, Rate Services 226

facets

Kind

Value

annotation

enumeration

AFTER

enumeration

BEFORE

enumeration

BETWEEN

enumeration

source

<xs:simpleType name="CustomDeliveryWindowType">

<xs:restriction base="xs:string">

<xs:enumeration value="AFTER"/>

<xs:enumeration value="BEFORE"/>

<xs:enumeration value="BETWEEN"/>

<xs:enumeration value="ON"/>

</xs:restriction>

</xs:simpleType>

simpleType CustomerImageUsageType

namespace http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CustomerImageUsage/Type

facets

Kind

Value

annotation

enumeration

LETTER_HEAD

enumeration

SIGNATURE

source

<xs:simpleType name="CustomerImageUsageType">

<xs:restriction base="xs:string">

<xs:enumeration value="LETTER_HEAD"/>

<xs:enumeration value="SIGNATURE"/>

</xs:restriction>

</xs:simpleType>

simpleType CustomerReferenceType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

CustomerReference/CustomerReferenceType Op900Detail/Reference

facets

Kind

Value

annotation

enumeration

BILL_OF_LADING

FedEx Web Services, Rate Services 227

enumeration

CUSTOMER_REFERENCE

enumeration

DEPARTMENT_NUMBER

enumeration

ELECTRONIC_PRODUCT_CODE

enumeration

INTRACOUNTRY_REGULATORY_REFERENCE

enumeration

INVOICE_NUMBER

enumeration

PACKING_SLIP_NUMBER

enumeration

P_O_NUMBER

enumeration

SHIPMENT_INTEGRITY

enumeration

STORE_NUMBER

source

<xs:simpleType name="CustomerReferenceType">

<xs:restriction base="xs:string">

<xs:enumeration value="BILL_OF_LADING"/>

<xs:enumeration value="CUSTOMER_REFERENCE"/>

<xs:enumeration value="DEPARTMENT_NUMBER"/>

<xs:enumeration value="ELECTRONIC_PRODUCT_CODE"/>

<xs:enumeration value="INTRACOUNTRY_REGULATORY_REFERENCE"/>

<xs:enumeration value="INVOICE_NUMBER"/>

<xs:enumeration value="PACKING_SLIP_NUMBER"/>

<xs:enumeration value="P_O_NUMBER"/>

<xs:enumeration value="SHIPMENT_INTEGRITY"/>

<xs:enumeration value="STORE_NUMBER"/>

</xs:restriction>

</xs:simpleType>

simpleType CustomLabelCoordinateUnits

namespace http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CustomLabelDetail/CoordinateUnits

facets

Kind

Value

annotation

enumeration

MILS

enumeration

PIXELS

source

<xs:simpleType name="CustomLabelCoordinateUnits">

<xs:restriction base="xs:string">

<xs:enumeration value="MILS"/>

<xs:enumeration value="PIXELS"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 228

simpleType DangerousGoodsAccessibilityType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

DangerousGoodsDetail/Accessibility

facets

Kind

Value

annotation

enumeration

ACCESSIBLE

enumeration

INACCESSIBLE

annotation documentation

Identifies whether or not the products being shipped are required to be accessible during delivery.

source

<xs:simpleType name="DangerousGoodsAccessibilityType">

<xs:annotation>

<xs:documentation>Identifies whether or not the products being shipped are required to be accessible during

delivery.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="ACCESSIBLE"/>

<xs:enumeration value="INACCESSIBLE"/>

</xs:restriction>

</xs:simpleType>

simpleType DayOfWeekType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

CommitDetail/BrokerCommitDayOfWeek CommitDetail/DayOfWeek DelayDetail/DayOfWeek RateReplyDetail/DeliveryDayOfWeek

FreightServiceCenterDetail/LimitedServiceDays CommitDetail/ProofOfDeliveryDayOfWeek

facets

Kind

Value

annotation

enumeration

FRI

enumeration

MON

enumeration

SAT

enumeration

SUN

enumeration

THU

enumeration

TUE

enumeration

WED

source <xs:simpleType name="DayOfWeekType">

<xs:restriction base="xs:string">

<xs:enumeration value="FRI"/>

FedEx Web Services, Rate Services 229

<xs:enumeration value="MON"/>

<xs:enumeration value="SAT"/>

<xs:enumeration value="SUN"/>

<xs:enumeration value="THU"/>

<xs:enumeration value="TUE"/>

<xs:enumeration value="WED"/>

</xs:restriction>

</xs:simpleType>

simpleType DelayLevelType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by element

DelayDetail/Level

facets

Kind

Value

annotation

enumeration

CITY

enumeration

COUNTRY

enumeration

LOCATION

enumeration

POSTAL_CODE

enumeration

SERVICE_AREA

enumeration

SERVICE_AREA_SPECIAL_SERVICE

enumeration

SPECIAL_SERVICE

annotation

documentation

The attribute of the shipment that caused the delay(e.g. Country, City, LocationId, Zip, service area, special handling )

source

<xs:simpleType name="DelayLevelType">

<xs:annotation>

<xs:documentation>The attribute of the shipment that caused the delay(e.g. Country, City, LocationId, Zip, service area, special

handling )</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CITY"/>

<xs:enumeration value="COUNTRY"/>

<xs:enumeration value="LOCATION"/>

<xs:enumeration value="POSTAL_CODE"/>

<xs:enumeration value="SERVICE_AREA"/>

<xs:enumeration value="SERVICE_AREA_SPECIAL_SERVICE"/>

<xs:enumeration value="SPECIAL_SERVICE"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 230

simpleType DelayPointType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

DelayDetail/Point

facets

Kind

Value

annotation

enumeration

BROKER

enumeration

DESTINATION

enumeration

ORIGIN

enumeration

ORIGIN_DESTINATION_PAIR

enumeration

PROOF_OF_DELIVERY_POINT

annotation

documentation

The point where the delay is occurring ( e.g. Origin, Destination, Broker location).

source

<xs:simpleType name="DelayPointType">

<xs:annotation>

<xs:documentation>The point where the delay is occurring ( e.g. Origin, Destination, Broker location).</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BROKER"/>

<xs:enumeration value="DESTINATION"/>

<xs:enumeration value="ORIGIN"/>

<xs:enumeration value="ORIGIN_DESTINATION_PAIR"/>

<xs:enumeration value="PROOF_OF_DELIVERY_POINT"/>

</xs:restriction>

</xs:simpleType>

simpleType DestinationControlStatementType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

element

DestinationControlDetail/StatementTypes

facets

Kind

Value

annotation

enumeration

DEPARTMENT_OF_COMMERCE

enumeration

DEPARTMENT_OF_STATE

annotation

documentation

Used to indicate whether the Destination Control Statement is of type Department of Commerce, Department of State or both.

source

<xs:simpleType name="DestinationControlStatementType">

<xs:annotation>

FedEx Web Services, Rate Services 231

<xs:documentation>Used to indicate whether the Destination Control Statement is of type Department of Commerce,

Department of State or both.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="DEPARTMENT_OF_COMMERCE"/>

<xs:enumeration value="DEPARTMENT_OF_STATE"/>

</xs:restriction>

</xs:simpleType>

simpleType DistanceUnits

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

Distance/Units

facets Kind

Value

annotation

enumeration

source

<xs:simpleType name="DistanceUnits">

<xs:restriction base="xs:string">

<xs:enumeration value="KM"/>

<xs:enumeration value="MI"/>

</xs:restriction>

</xs:simpleType>

simpleType DocTabContentType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

DocTabContent/DocTabContentType

facets

Kind

Value

annotation

enumeration

BARCODED

enumeration

MINIMUM

enumeration

STANDARD

enumeration

ZONE001

source

<xs:simpleType name="DocTabContentType">

<xs:restriction base="xs:string">

FedEx Web Services, Rate Services 232

<xs:enumeration value="BARCODED"/>

<xs:enumeration value="MINIMUM"/>

<xs:enumeration value="STANDARD"/>

<xs:enumeration value="ZONE001"/>

</xs:restriction>

</xs:simpleType>

simpleType DocTabZoneJustificationType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

DocTabZoneSpecification/Justification

facets

Kind

Value

annotation

enumeration

LEFT

enumeration

RIGHT

source

<xs:simpleType name="DocTabZoneJustificationType">

<xs:restriction base="xs:string">

<xs:enumeration value="LEFT"/>

<xs:enumeration value="RIGHT"/>

</xs:restriction>

</xs:simpleType>

simpleType DropoffType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

RequestedShipment/DropoffType

facets

Kind

Value

annotation

enumeration

BUSINESS_SERVICE_CENTER

enumeration

DROP_BOX

enumeration

REGULAR_PICKUP

enumeration

REQUEST_COURIER

enumeration

STATION

annotation

documentation

Identifies the method by which the package is to be tendered to FedEx. This element does not dispatch a courier for package pickup.

source

<xs:simpleType name="DropoffType">

FedEx Web Services, Rate Services 233

<xs:annotation>

<xs:documentation>Identifies the method by which the package is to be tendered to FedEx. This element does not dispatch a

courier for package pickup.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BUSINESS_SERVICE_CENTER"/>

<xs:enumeration value="DROP_BOX"/>

<xs:enumeration value="REGULAR_PICKUP"/>

<xs:enumeration value="REQUEST_COURIER"/>

<xs:enumeration value="STATION"/>

</xs:restriction>

</xs:simpleType>

simpleType EdtRequestType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

RequestedShipment/EdtRequestType

facets

Kind

Value

annotation

enumeration

ALL

enumeration

NONE

annotation

documentation

Specifies the types of Estimated Duties and Taxes to be included in a rate quotation for an international shipment.

source

<xs:simpleType name="EdtRequestType">

<xs:annotation>

<xs:documentation>Specifies the types of Estimated Duties and Taxes to be included in a rate quotation for an international

shipment.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="ALL"/>

<xs:enumeration value="NONE"/>

</xs:restriction>

</xs:simpleType>

simpleType EdtTaxType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

FedEx Web Services, Rate Services 234

used by

element

EdtTaxDetail/TaxType

facets

Kind

Value

annotation

enumeration

ADDITIONAL_TAXES

enumeration

CONSULAR_INVOICE_FEE

enumeration

CUSTOMS_SURCHARGES

enumeration

DUTY

enumeration

EXCISE_TAX

enumeration

FOREIGN_EXCHANGE_TAX

enumeration

GENERAL_SALES_TAX

enumeration

IMPORT_LICENSE_FEE

enumeration

INTERNAL_ADDITIONAL_TAXES

enumeration

INTERNAL_SENSITIVE_PRODUCTS_TAX

enumeration

OTHER

enumeration

SENSITIVE_PRODUCTS_TAX

enumeration

STAMP_TAX

enumeration

STATISTICAL_TAX

enumeration

TRANSPORT_FACILITIES_TAX

source

<xs:simpleType name="EdtTaxType">

<xs:restriction base="xs:string">

<xs:enumeration value="ADDITIONAL_TAXES"/>

<xs:enumeration value="CONSULAR_INVOICE_FEE"/>

<xs:enumeration value="CUSTOMS_SURCHARGES"/>

<xs:enumeration value="DUTY"/>

<xs:enumeration value="EXCISE_TAX"/>

<xs:enumeration value="FOREIGN_EXCHANGE_TAX"/>

<xs:enumeration value="GENERAL_SALES_TAX"/>

<xs:enumeration value="IMPORT_LICENSE_FEE"/>

<xs:enumeration value="INTERNAL_ADDITIONAL_TAXES"/>

<xs:enumeration value="INTERNAL_SENSITIVE_PRODUCTS_TAX"/>

<xs:enumeration value="OTHER"/>

<xs:enumeration value="SENSITIVE_PRODUCTS_TAX"/>

<xs:enumeration value="STAMP_TAX"/>

<xs:enumeration value="STATISTICAL_TAX"/>

<xs:enumeration value="TRANSPORT_FACILITIES_TAX"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 235

simpleType EMailNotificationEventType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

EMailNotificationRecipient/NotificationEventsRequested

facets

Kind

Value

annotation

enumeration

ON_DELIVERY

enumeration

ON_EXCEPTION

enumeration

ON_SHIPMENT

enumeration

ON_TENDER

source

<xs:simpleType name="EMailNotificationEventType">

<xs:restriction base="xs:string">

<xs:enumeration value="ON_DELIVERY"/>

<xs:enumeration value="ON_EXCEPTION"/>

<xs:enumeration value="ON_SHIPMENT"/>

<xs:enumeration value="ON_TENDER"/>

</xs:restriction>

</xs:simpleType>

simpleType EMailNotificationFormatType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

EMailNotificationRecipient/Format

facets

Kind

Value

annotation

enumeration

HTML

enumeration

TEXT

enumeration

WIRELESS

annotation

documentation

The format of the email

source

<xs:simpleType name="EMailNotificationFormatType">

<xs:annotation>

<xs:documentation>The format of the email</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="HTML"/>

<xs:enumeration value="TEXT"/>

<xs:enumeration value="WIRELESS"/>

FedEx Web Services, Rate Services 236

</xs:restriction>

</xs:simpleType>

simpleType EMailNotificationRecipientType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

EMailNotificationRecipient/EMailNotificationRecipientType ShippingDocumentEMailRecipient/RecipientType

facets Kind

Value

annotation

enumeration

BROKER

enumeration

OTHER

enumeration

RECIPIENT

enumeration

SHIPPER

annotation

documentation

Identifies the set of valid email notification recipient types. For SHIPPER, RECIPIENT and BROKER the email address asssociated with their definitions will be

used, any email address sent with the email notification for these three email notification recipient types will be ignored.

source <xs:simpleType name="EMailNotificationRecipientType">

<xs:annotation>

<xs:documentation>Identifies the set of valid email notification recipient types. For SHIPPER, RECIPIENT and BROKER the

email address asssociated with their definitions will be used, any email address sent with the email notification for these three email

notification recipient types will be ignored.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BROKER"/>

<xs:enumeration value="OTHER"/>

<xs:enumeration value="RECIPIENT"/>

<xs:enumeration value="SHIPPER"/>

</xs:restriction>

</xs:simpleType>

simpleType ExpressRegionCode

namespace http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ClientDetail/Region

facets

Kind

Value

annotation

enumeration

APAC

FedEx Web Services, Rate Services 237

enumeration

EMEA

enumeration

LAC

enumeration

annotation

documentation

Indicates a FedEx Express operating region.

source

<xs:simpleType name="ExpressRegionCode">

<xs:annotation>

<xs:documentation>Indicates a FedEx Express operating region.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="APAC"/>

<xs:enumeration value="CA"/>

<xs:enumeration value="EMEA"/>

<xs:enumeration value="LAC"/>

<xs:enumeration value="US"/>

</xs:restriction>

</xs:simpleType>

simpleType FedExLocationType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

HoldAtLocationDetail/LocationType

facets

Kind

Value

annotation

enumeration

FEDEX_EXPRESS_STATION

enumeration

FEDEX_GROUND_TERMINAL

enumeration

FEDEX_OFFICE

annotation

documentation

Identifies a kind of FedEx facility.

source

<xs:simpleType name="FedExLocationType">

<xs:annotation>

<xs:documentation>Identifies a kind of FedEx facility.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="FEDEX_EXPRESS_STATION"/>

<xs:enumeration value="FEDEX_GROUND_TERMINAL"/>

<xs:enumeration value="FEDEX_OFFICE"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 238

simpleType FlatbedTrailerOption

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

FlatbedTrailerDetail/Options

facets

Kind

Value

annotation

enumeration

OVER_DIMENSION

enumeration

TARP

source <xs:simpleType name="FlatbedTrailerOption">

<xs:restriction base="xs:string">

<xs:enumeration value="OVER_DIMENSION"/>

<xs:enumeration value="TARP"/>

</xs:restriction>

</xs:simpleType>

simpleType FreightAccountPaymentType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

FreightShipmentDetail/PaymentType FreightSpecialServicePayment/PaymentType

facets

Kind

Value

annotation

enumeration

COLLECT

enumeration

PREPAID

source

<xs:simpleType name="FreightAccountPaymentType">

<xs:restriction base="xs:string">

<xs:enumeration value="COLLECT"/>

<xs:enumeration value="PREPAID"/>

</xs:restriction>

</xs:simpleType>

simpleType FreightBaseChargeCalculationType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

FreightRateDetail/BaseChargeCalculation

facets

Kind

Value

annotation

FedEx Web Services, Rate Services 239

enumeration

LINE_ITEMS

enumeration

UNIT_PRICING

annotation

documentation

Specifies the way in which base charges for a Freight shipment or shipment leg are calculated.

source

<xs:simpleType name="FreightBaseChargeCalculationType">

<xs:annotation>

<xs:documentation>Specifies the way in which base charges for a Freight shipment or shipment leg are

calculated.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="LINE_ITEMS"/>

<xs:enumeration value="UNIT_PRICING"/>

</xs:restriction>

</xs:simpleType>

simpleType FreightChargeBasisType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

FreightBaseCharge/ChargeBasis

facets

Kind

Value

annotation

enumeration

CWT

enumeration

FLAT

enumeration

MINIMUM

source

<xs:simpleType name="FreightChargeBasisType">

<xs:restriction base="xs:string">

<xs:enumeration value="CWT"/>

<xs:enumeration value="FLAT"/>

<xs:enumeration value="MINIMUM"/>

</xs:restriction>

</xs:simpleType>

simpleType FreightClassType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

FedEx Web Services, Rate Services 240

used by

elements

FreightBaseCharge/FreightClass FreightShipmentLineItem/FreightClass FreightBaseCharge/RatedAsClass

facets

Kind

Value

annotation

enumeration

CLASS_050

enumeration

CLASS_055

enumeration

CLASS_060

enumeration

CLASS_065

enumeration

CLASS_070

enumeration

CLASS_077_5

enumeration

CLASS_085

enumeration

CLASS_092_5

enumeration

CLASS_100

enumeration

CLASS_110

enumeration

CLASS_125

enumeration

CLASS_150

enumeration

CLASS_175

enumeration

CLASS_200

enumeration

CLASS_250

enumeration

CLASS_300

enumeration

CLASS_400

enumeration

CLASS_500

annotation

documentation

These values represent the industry-standard freight classes used for FedEx Freight and FedEx National Freight shipment description. (Note: The alphabetic

prefixes are required to distinguish these values from decimal numbers on some client platforms.)

source

<xs:simpleType name="FreightClassType">

<xs:annotation>

<xs:documentation>These values represent the industry-standard freight classes used for FedEx Freight and FedEx National

Freight shipment description. (Note: The alphabetic prefixes are required to distinguish these values from decimal numbers on

some client platforms.)</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CLASS_050"/>

<xs:enumeration value="CLASS_055"/>

<xs:enumeration value="CLASS_060"/>

<xs:enumeration value="CLASS_065"/>

<xs:enumeration value="CLASS_070"/>

<xs:enumeration value="CLASS_077_5"/>

<xs:enumeration value="CLASS_085"/>

<xs:enumeration value="CLASS_092_5"/>

FedEx Web Services, Rate Services 241

<xs:enumeration value="CLASS_100"/>

<xs:enumeration value="CLASS_110"/>

<xs:enumeration value="CLASS_125"/>

<xs:enumeration value="CLASS_150"/>

<xs:enumeration value="CLASS_175"/>

<xs:enumeration value="CLASS_200"/>

<xs:enumeration value="CLASS_250"/>

<xs:enumeration value="CLASS_300"/>

<xs:enumeration value="CLASS_400"/>

<xs:enumeration value="CLASS_500"/>

</xs:restriction>

</xs:simpleType>

simpleType FreightGuaranteeType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

ServiceSubOptionDetail/FreightGuarantee FreightGuaranteeDetail/Type

facets

Kind

Value

annotation

enumeration

GUARANTEED_DATE

enumeration

GUARANTEED_MORNING

source

<xs:simpleType name="FreightGuaranteeType">

<xs:restriction base="xs:string">

<xs:enumeration value="GUARANTEED_DATE"/>

<xs:enumeration value="GUARANTEED_MORNING"/>

</xs:restriction>

</xs:simpleType>

simpleType FreightOnValueType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CustomsClearanceDetail/FreightOnValue

facets

Kind

Value

annotation

enumeration

CARRIER_RISK

enumeration

OWN_RISK

FedEx Web Services, Rate Services 242

annotation

documentation

Identifies responsibilities with respect to loss, damage, etc.

source

<xs:simpleType name="FreightOnValueType">

<xs:annotation>

<xs:documentation>Identifies responsibilities with respect to loss, damage, etc.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CARRIER_RISK"/>

<xs:enumeration value="OWN_RISK"/>

</xs:restriction>

</xs:simpleType>

simpleType FreightServiceSchedulingType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

FreightServiceCenterDetail/LocalServiceScheduling

facets

Kind

Value

annotation

enumeration

LIMITED

enumeration

STANDARD

enumeration

WILL_CALL

annotation

documentation

Specifies the type of service scheduling offered from a Freight or National Freight Service Center to a customer-supplied address.

source

<xs:simpleType name="FreightServiceSchedulingType">

<xs:annotation>

<xs:documentation>Specifies the type of service scheduling offered from a Freight or National Freight Service Center to a

customer-supplied address.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="LIMITED"/>

<xs:enumeration value="STANDARD"/>

<xs:enumeration value="WILL_CALL"/>

</xs:restriction>

</xs:simpleType>

simpleType FreightShipmentRoleType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

FedEx Web Services, Rate Services 243

used by

element

FreightShipmentDetail/Role

facets

Kind

Value

annotation

enumeration

CONSIGNEE

enumeration

SHIPPER

enumeration

THIRD_PARTY

annotation

documentation

Indicates the role of the party submitting the transaction.

source

<xs:simpleType name="FreightShipmentRoleType">

<xs:annotation>

<xs:documentation>Indicates the role of the party submitting the transaction.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CONSIGNEE"/>

<xs:enumeration value="SHIPPER"/>

<xs:enumeration value="THIRD_PARTY"/>

</xs:restriction>

</xs:simpleType>

simpleType HazardousCommodityLabelTextOptionType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

element

HazardousCommodityOptionDetail/LabelTextOption

facets

Kind

Value

annotation

enumeration

APPEND

enumeration

OVERRIDE

enumeration

STANDARD

annotation

documentation

Specifies how the commodity is to be labeled.

source

<xs:simpleType name="HazardousCommodityLabelTextOptionType">

<xs:annotation>

<xs:documentation>Specifies how the commodity is to be labeled.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="APPEND"/>

<xs:enumeration value="OVERRIDE"/>

<xs:enumeration value="STANDARD"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 244

simpleType HazardousCommodityOptionType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

DangerousGoodsDetail/Options

facets

Kind

Value

annotation

enumeration

HAZARDOUS_MATERIALS

enumeration

LITHIUM_BATTERY_EXCEPTION

enumeration

ORM_D

enumeration

REPORTABLE_QUANTITIES

enumeration

SMALL_QUANTITY_EXCEPTION

annotation

documentation

Indicates which kind of hazardous content (as defined by DOT) is being reported.

source

<xs:simpleType name="HazardousCommodityOptionType">

<xs:annotation>

<xs:documentation>Indicates which kind of hazardous content (as defined by DOT) is being reported.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="HAZARDOUS_MATERIALS"/>

<xs:enumeration value="LITHIUM_BATTERY_EXCEPTION"/>

<xs:enumeration value="ORM_D"/>

<xs:enumeration value="REPORTABLE_QUANTITIES"/>

<xs:enumeration value="SMALL_QUANTITY_EXCEPTION"/>

</xs:restriction>

</xs:simpleType>

simpleType HazardousCommodityPackingGroupType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

element

HazardousCommodityDescription/PackingGroup

facets

Kind

Value

annotation

enumeration

III

annotation

documentation

Identifies DOT packing group for a hazardous commodity.

source

<xs:simpleType name="HazardousCommodityPackingGroupType">

FedEx Web Services, Rate Services 245

<xs:annotation>

<xs:documentation>Identifies DOT packing group for a hazardous commodity.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="I"/>

<xs:enumeration value="II"/>

<xs:enumeration value="III"/>

</xs:restriction>

</xs:simpleType>

simpleType HomeDeliveryPremiumType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

HomeDeliveryPremiumDetail/HomeDeliveryPremiumType

facets

Kind

Value

annotation

enumeration

APPOINTMENT

enumeration

DATE_CERTAIN

enumeration

EVENING

source

<xs:simpleType name="HomeDeliveryPremiumType">

<xs:restriction base="xs:string">

<xs:enumeration value="APPOINTMENT"/>

<xs:enumeration value="DATE_CERTAIN"/>

<xs:enumeration value="EVENING"/>

</xs:restriction>

</xs:simpleType>

simpleType ImageId

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CustomerImageUsage/Id

facets

Kind

Value

annotation

enumeration

IMAGE_1

enumeration

IMAGE_2

enumeration

IMAGE_3

FedEx Web Services, Rate Services 246

enumeration

IMAGE_4

enumeration

IMAGE_5

source

<xs:simpleType name="ImageId">

<xs:restriction base="xs:string">

<xs:enumeration value="IMAGE_1"/>

<xs:enumeration value="IMAGE_2"/>

<xs:enumeration value="IMAGE_3"/>

<xs:enumeration value="IMAGE_4"/>

<xs:enumeration value="IMAGE_5"/>

</xs:restriction>

</xs:simpleType>

simpleType InternationalDocumentContentType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

elements

CommitDetail/DocumentContent CustomsClearanceDetail/DocumentContent

facets

Kind

Value

annotation

enumeration

DOCUMENTS_ONLY

enumeration

NON_DOCUMENTS

annotation

documentation

The type of International shipment.

source

<xs:simpleType name="InternationalDocumentContentType">

<xs:annotation>

<xs:documentation>The type of International shipment.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="DOCUMENTS_ONLY"/>

<xs:enumeration value="NON_DOCUMENTS"/>

</xs:restriction>

</xs:simpleType>

simpleType LabelFormatType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by element

LabelSpecification/LabelFormatType

FedEx Web Services, Rate Services 247

facets

Kind

Value

annotation

enumeration

COMMON2D

enumeration

LABEL_DATA_ONLY

enumeration

MAILROOM

enumeration

NO_LABEL

enumeration

OPERATIONAL_LABEL

enumeration

PRE_COMMON2D

annotation

documentation

Specifies the type of label to be returned.

source

<xs:simpleType name="LabelFormatType">

<xs:annotation>

<xs:documentation>Specifies the type of label to be returned.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="COMMON2D"/>

<xs:enumeration value="LABEL_DATA_ONLY"/>

<xs:enumeration value="MAILROOM"/>

<xs:enumeration value="NO_LABEL"/>

<xs:enumeration value="OPERATIONAL_LABEL"/>

<xs:enumeration value="PRE_COMMON2D"/>

</xs:restriction>

</xs:simpleType>

simpleType LabelMaskableDataType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CustomerSpecifiedLabelDetail/MaskedData

facets

Kind

Value

annotation

enumeration

CUSTOMS_VALUE

enumeration

DIMENSIONS

enumeration

DUTIES_AND_TAXES_PAYOR_ACCOUNT_NUMBER

enumeration

FREIGHT_PAYOR_ACCOUNT_NUMBER

enumeration

PACKAGE_SEQUENCE_AND_COUNT

enumeration

SHIPPER_ACCOUNT_NUMBER

enumeration

SUPPLEMENTAL_LABEL_DOC_TAB

enumeration

TERMS_AND_CONDITIONS

FedEx Web Services, Rate Services 248

enumeration

TOTAL_WEIGHT

enumeration

TRANSPORTATION_CHARGES_PAYOR_ACCOUNT_NUMBER

annotation

documentation

Names for data elements / areas which may be suppressed from printing on labels.

source

<xs:simpleType name="LabelMaskableDataType">

<xs:annotation>

<xs:documentation>Names for data elements / areas which may be suppressed from printing on labels.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CUSTOMS_VALUE"/>

<xs:enumeration value="DIMENSIONS"/>

<xs:enumeration value="DUTIES_AND_TAXES_PAYOR_ACCOUNT_NUMBER"/>

<xs:enumeration value="FREIGHT_PAYOR_ACCOUNT_NUMBER"/>

<xs:enumeration value="PACKAGE_SEQUENCE_AND_COUNT"/>

<xs:enumeration value="SHIPPER_ACCOUNT_NUMBER"/>

<xs:enumeration value="SUPPLEMENTAL_LABEL_DOC_TAB"/>

<xs:enumeration value="TERMS_AND_CONDITIONS"/>

<xs:enumeration value="TOTAL_WEIGHT"/>

<xs:enumeration value="TRANSPORTATION_CHARGES_PAYOR_ACCOUNT_NUMBER"/>

</xs:restriction>

</xs:simpleType>

simpleType LabelPrintingOrientationType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by elements

CustomDocumentDetail/LabelPrintingOrientation LabelSpecification/LabelPrintingOrientation

facets

Kind

Value

annotation

enumeration

BOTTOM_EDGE_OF_TEXT_FIRST

enumeration

TOP_EDGE_OF_TEXT_FIRST

annotation

documentation

This indicates if the top or bottom of the label comes out of the printer first.

source

<xs:simpleType name="LabelPrintingOrientationType">

<xs:annotation>

<xs:documentation>This indicates if the top or bottom of the label comes out of the printer first.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BOTTOM_EDGE_OF_TEXT_FIRST"/>

<xs:enumeration value="TOP_EDGE_OF_TEXT_FIRST"/>

FedEx Web Services, Rate Services 249

</xs:restriction>

</xs:simpleType>

simpleType LabelRotationType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

CustomDocumentDetail/LabelRotation LabelSpecification/LabelRotation

facets Kind

Value

annotation

enumeration

LEFT

enumeration

NONE

enumeration

RIGHT

enumeration

UPSIDE_DOWN

annotation

documentation

Relative to normal orientation for the printer.

source

<xs:simpleType name="LabelRotationType">

<xs:annotation>

<xs:documentation>Relative to normal orientation for the printer.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="LEFT"/>

<xs:enumeration value="NONE"/>

<xs:enumeration value="RIGHT"/>

<xs:enumeration value="UPSIDE_DOWN"/>

</xs:restriction>

</xs:simpleType>

simpleType LabelStockType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

LabelSpecification/LabelStockType

facets

Kind

Value

annotation

enumeration

PAPER_4X6

enumeration

PAPER_4X8

enumeration

PAPER_4X9

FedEx Web Services, Rate Services 250

enumeration

PAPER_7X4.75

enumeration

PAPER_8.5X11_BOTTOM_HALF_LABEL

enumeration

PAPER_8.5X11_TOP_HALF_LABEL

enumeration

STOCK_4X6

enumeration

STOCK_4X6.75_LEADING_DOC_TAB

enumeration

STOCK_4X6.75_TRAILING_DOC_TAB

enumeration

STOCK_4X8

enumeration

STOCK_4X9_LEADING_DOC_TAB

enumeration

STOCK_4X9_TRAILING_DOC_TAB

annotation

documentation

For thermal printer labels this indicates the size of the label and the location of the doc tab if present.

source

<xs:simpleType name="LabelStockType">

<xs:annotation>

<xs:documentation>For thermal printer labels this indicates the size of the label and the location of the doc tab if

present.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="PAPER_4X6"/>

<xs:enumeration value="PAPER_4X8"/>

<xs:enumeration value="PAPER_4X9"/>

<xs:enumeration value="PAPER_7X4.75"/>

<xs:enumeration value="PAPER_8.5X11_BOTTOM_HALF_LABEL"/>

<xs:enumeration value="PAPER_8.5X11_TOP_HALF_LABEL"/>

<xs:enumeration value="STOCK_4X6"/>

<xs:enumeration value="STOCK_4X6.75_LEADING_DOC_TAB"/>

<xs:enumeration value="STOCK_4X6.75_TRAILING_DOC_TAB"/>

<xs:enumeration value="STOCK_4X8"/>

<xs:enumeration value="STOCK_4X9_LEADING_DOC_TAB"/>

<xs:enumeration value="STOCK_4X9_TRAILING_DOC_TAB"/>

</xs:restriction>

</xs:simpleType>

simpleType LiabilityCoverageType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

LiabilityCoverageDetail/CoverageType

facets

Kind

Value

annotation

FedEx Web Services, Rate Services 251

enumeration

NEW

enumeration

USED_OR_RECONDITIONED

source

<xs:simpleType name="LiabilityCoverageType">

<xs:restriction base="xs:string">

<xs:enumeration value="NEW"/>

<xs:enumeration value="USED_OR_RECONDITIONED"/>

</xs:restriction>

</xs:simpleType>

simpleType LinearUnits

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by elements

Dimensions/Units LinearMeasure/Units

facets

Kind

Value

annotation

enumeration

annotation

documentation

CM = centimeters, IN = inches

source

<xs:simpleType name="LinearUnits">

<xs:annotation>

<xs:documentation>CM = centimeters, IN = inches</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CM"/>

<xs:enumeration value="IN"/>

</xs:restriction>

</xs:simpleType>

simpleType NaftaImporterSpecificationType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by element

NaftaCertificateOfOriginDetail/ImporterSpecification

facets

Kind

Value

annotation

enumeration

IMPORTER_OF_RECORD

enumeration

RECIPIENT

FedEx Web Services, Rate Services 252

enumeration

UNKNOWN

enumeration

VARIOUS

source

<xs:simpleType name="NaftaImporterSpecificationType">

<xs:restriction base="xs:string">

<xs:enumeration value="IMPORTER_OF_RECORD"/>

<xs:enumeration value="RECIPIENT"/>

<xs:enumeration value="UNKNOWN"/>

<xs:enumeration value="VARIOUS"/>

</xs:restriction>

</xs:simpleType>

simpleType NaftaNetCostMethodCode

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

NaftaCommodityDetail/NetCostMethod

facets

Kind

Value

annotation

enumeration

annotation

documentation

Net cost method used.

source <xs:simpleType name="NaftaNetCostMethodCode">

<xs:annotation>

<xs:documentation>

Net cost method used.

</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="NC"/>

<xs:enumeration value="NO"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 253

simpleType NaftaPreferenceCriterionCode

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

NaftaCommodityDetail/PreferenceCriterion

facets

Kind

Value

annotation

enumeration

annotation

documentation

See instructions for NAFTA Certificate of Origin for code definitions.

source <xs:simpleType name="NaftaPreferenceCriterionCode">

<xs:annotation>

<xs:documentation>See instructions for NAFTA Certificate of Origin for code definitions.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="A"/>

<xs:enumeration value="B"/>

<xs:enumeration value="C"/>

<xs:enumeration value="D"/>

<xs:enumeration value="E"/>

<xs:enumeration value="F"/>

</xs:restriction>

</xs:simpleType>

simpleType NaftaProducerDeterminationCode

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

NaftaCommodityDetail/ProducerDetermination

facets

Kind

Value

annotation

enumeration

NO_1

enumeration

NO_2

enumeration

NO_3

enumeration

YES

FedEx Web Services, Rate Services 254

annotation

documentation

See instructions for NAFTA Certificate of Origin for code definitions.

source

<xs:simpleType name="NaftaProducerDeterminationCode">

<xs:annotation>

<xs:documentation>See instructions for NAFTA Certificate of Origin for code definitions.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="NO_1"/>

<xs:enumeration value="NO_2"/>

<xs:enumeration value="NO_3"/>

<xs:enumeration value="YES"/>

</xs:restriction>

</xs:simpleType>

simpleType NaftaProducerSpecificationType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

NaftaCertificateOfOriginDetail/ProducerSpecification

facets

Kind

Value

annotation

enumeration

AVAILABLE_UPON_REQUEST

enumeration

MULTIPLE_SPECIFIED

enumeration

SAME

enumeration

SINGLE_SPECIFIED

enumeration

UNKNOWN

source

<xs:simpleType name="NaftaProducerSpecificationType">

<xs:restriction base="xs:string">

<xs:enumeration value="AVAILABLE_UPON_REQUEST"/>

<xs:enumeration value="MULTIPLE_SPECIFIED"/>

<xs:enumeration value="SAME"/>

<xs:enumeration value="SINGLE_SPECIFIED"/>

<xs:enumeration value="UNKNOWN"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 255

simpleType NotificationSeverityType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

RateReply/HighestSeverity Notification/Severity

facets

Kind

Value

annotation

enumeration

ERROR

enumeration

FAILURE

enumeration

NOTE

enumeration

SUCCESS

enumeration

WARNING

annotation

documentation

Identifies the set of severity values for a Notification.

source

<xs:simpleType name="NotificationSeverityType">

<xs:annotation>

<xs:documentation>Identifies the set of severity values for a Notification.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="ERROR"/>

<xs:enumeration value="FAILURE"/>

<xs:enumeration value="NOTE"/>

<xs:enumeration value="SUCCESS"/>

<xs:enumeration value="WARNING"/>

</xs:restriction>

</xs:simpleType>

simpleType OversizeClassType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

element

RatedPackageDetail/OversizeClass

facets

Kind

Value

annotation

enumeration

OVERSIZE_1

enumeration

OVERSIZE_2

enumeration

OVERSIZE_3

annotation

documentation

The Oversize classification for a package.

source

<xs:simpleType name="OversizeClassType">

FedEx Web Services, Rate Services 256

<xs:annotation>

<xs:documentation>The Oversize classification for a package.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="OVERSIZE_1"/>

<xs:enumeration value="OVERSIZE_2"/>

<xs:enumeration value="OVERSIZE_3"/>

</xs:restriction>

</xs:simpleType>

simpleType PackageSpecialServiceType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

PackageSpecialServicesRequested/SpecialServiceTypes

facets

Kind

Value

annotation

enumeration

ALCOHOL

enumeration

APPOINTMENT_DELIVERY

enumeration

COD

enumeration

DANGEROUS_GOODS

enumeration

DRY_ICE

enumeration

NON_STANDARD_CONTAINER

enumeration

PRIORITY_ALERT

enumeration

SIGNATURE_OPTION

annotation

documentation

Identifies the collection of special services offered by FedEx.

source

<xs:simpleType name="PackageSpecialServiceType">

<xs:annotation>

<xs:documentation>Identifies the collection of special services offered by FedEx.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="ALCOHOL"/>

<xs:enumeration value="APPOINTMENT_DELIVERY"/>

<xs:enumeration value="COD"/>

<xs:enumeration value="DANGEROUS_GOODS"/>

<xs:enumeration value="DRY_ICE"/>

<xs:enumeration value="NON_STANDARD_CONTAINER"/>

<xs:enumeration value="PRIORITY_ALERT"/>

FedEx Web Services, Rate Services 257

<xs:enumeration value="SIGNATURE_OPTION"/>

</xs:restriction>

</xs:simpleType>

simpleType PackagingType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

elements

RateReplyDetail/PackagingType RequestedShipment/PackagingType

facets

Kind

Value

annotation

enumeration

FEDEX_10KG_BOX

enumeration

FEDEX_25KG_BOX

enumeration

FEDEX_BOX

enumeration

FEDEX_ENVELOPE

enumeration

FEDEX_PAK

enumeration

FEDEX_TUBE

enumeration

YOUR_PACKAGING

annotation

documentation

Identifies the packaging used by the requestor for the package. See PackagingType for list of valid enumerated values.

source

<xs:simpleType name="PackagingType">

<xs:annotation>

<xs:documentation>Identifies the packaging used by the requestor for the package. See PackagingType for list of valid

enumerated values.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="FEDEX_10KG_BOX"/>

<xs:enumeration value="FEDEX_25KG_BOX"/>

<xs:enumeration value="FEDEX_BOX"/>

<xs:enumeration value="FEDEX_ENVELOPE"/>

<xs:enumeration value="FEDEX_PAK"/>

<xs:enumeration value="FEDEX_TUBE"/>

<xs:enumeration value="YOUR_PACKAGING"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 258

simpleType PaymentType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

Payment/PaymentType

facets

Kind

Value

annotation

enumeration

SENDER

annotation

documentation

Identifies the method of payment for a service.

source

<xs:simpleType name="PaymentType">

<xs:annotation>

<xs:documentation>Identifies the method of payment for a service.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="SENDER"/>

</xs:restriction>

</xs:simpleType>

simpleType PendingShipmentType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

PendingShipmentDetail/Type

facets

Kind

Value

annotation

enumeration

source

<xs:simpleType name="PendingShipmentType">

<xs:restriction base="xs:string">

<xs:enumeration value="EMAIL"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 259

simpleType PhysicalPackagingType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

FreightShipmentLineItem/Packaging RequestedPackageLineItem/PhysicalPackaging

facets

Kind

Value

annotation

enumeration

BAG

enumeration

BARREL

enumeration

BASKET

enumeration

BOX

enumeration

BUCKET

enumeration

BUNDLE

enumeration

CARTON

enumeration

CASE

enumeration

CONTAINER

enumeration

CRATE

enumeration

CYLINDER

enumeration

DRUM

enumeration

ENVELOPE

enumeration

HAMPER

enumeration

OTHER

enumeration

PAIL

enumeration

PALLET

enumeration

PIECE

enumeration

REEL

enumeration

ROLL

enumeration

SKID

enumeration

TANK

enumeration

TUBE

annotation

documentation

This enumeration rationalizes the former FedEx Express international "admissibility package" types (based on ANSI X.12) and the FedEx Freight packaging

types. The values represented are those common to both carriers.

source

<xs:simpleType name="PhysicalPackagingType">

<xs:annotation>

<xs:documentation>This enumeration rationalizes the former FedEx Express international "admissibility package" types (based

on ANSI X.12) and the FedEx Freight packaging types. The values represented are those common to both

carriers.</xs:documentation>

FedEx Web Services, Rate Services 260

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BAG"/>

<xs:enumeration value="BARREL"/>

<xs:enumeration value="BASKET"/>

<xs:enumeration value="BOX"/>

<xs:enumeration value="BUCKET"/>

<xs:enumeration value="BUNDLE"/>

<xs:enumeration value="CARTON"/>

<xs:enumeration value="CASE"/>

<xs:enumeration value="CONTAINER"/>

<xs:enumeration value="CRATE"/>

<xs:enumeration value="CYLINDER"/>

<xs:enumeration value="DRUM"/>

<xs:enumeration value="ENVELOPE"/>

<xs:enumeration value="HAMPER"/>

<xs:enumeration value="OTHER"/>

<xs:enumeration value="PAIL"/>

<xs:enumeration value="PALLET"/>

<xs:enumeration value="PIECE"/>

<xs:enumeration value="REEL"/>

<xs:enumeration value="ROLL"/>

<xs:enumeration value="SKID"/>

<xs:enumeration value="TANK"/>

<xs:enumeration value="TUBE"/>

</xs:restriction>

</xs:simpleType>

simpleType PickupRequestSourceType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

PickupDetail/RequestSource

facets

Kind

Value

annotation

enumeration

AUTOMATION

enumeration

CUSTOMER_SERVICE

source

<xs:simpleType name="PickupRequestSourceType">

<xs:restriction base="xs:string">

<xs:enumeration value="AUTOMATION"/>

FedEx Web Services, Rate Services 261

<xs:enumeration value="CUSTOMER_SERVICE"/>

</xs:restriction>

</xs:simpleType>

simpleType PickupRequestType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

element

PickupDetail/RequestType

facets

Kind

Value

annotation

enumeration

FUTURE_DAY

enumeration

SAME_DAY

source

<xs:simpleType name="PickupRequestType">

<xs:restriction base="xs:string">

<xs:enumeration value="FUTURE_DAY"/>

<xs:enumeration value="SAME_DAY"/>

</xs:restriction>

</xs:simpleType>

simpleType PricingCodeType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ShipmentRateDetail/PricingCode

facets

Kind

Value

annotation

enumeration

ACTUAL

enumeration

ALTERNATE

enumeration

BASE

enumeration

HUNDREDWEIGHT

enumeration

HUNDREDWEIGHT_ALTERNATE

enumeration

INTERNATIONAL_DISTRIBUTION

enumeration

INTERNATIONAL_ECONOMY_SERVICE

enumeration

LTL_FREIGHT

enumeration

PACKAGE

enumeration

SHIPMENT

FedEx Web Services, Rate Services 262

enumeration

SHIPMENT_FIVE_POUND_OPTIONAL

enumeration

SHIPMENT_OPTIONAL

enumeration

SPECIAL

source

<xs:simpleType name="PricingCodeType">

<xs:restriction base="xs:string">

<xs:enumeration value="ACTUAL"/>

<xs:enumeration value="ALTERNATE"/>

<xs:enumeration value="BASE"/>

<xs:enumeration value="HUNDREDWEIGHT"/>

<xs:enumeration value="HUNDREDWEIGHT_ALTERNATE"/>

<xs:enumeration value="INTERNATIONAL_DISTRIBUTION"/>

<xs:enumeration value="INTERNATIONAL_ECONOMY_SERVICE"/>

<xs:enumeration value="LTL_FREIGHT"/>

<xs:enumeration value="PACKAGE"/>

<xs:enumeration value="SHIPMENT"/>

<xs:enumeration value="SHIPMENT_FIVE_POUND_OPTIONAL"/>

<xs:enumeration value="SHIPMENT_OPTIONAL"/>

<xs:enumeration value="SPECIAL"/>

</xs:restriction>

</xs:simpleType>

simpleType PurposeOfShipmentType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by element

CommercialInvoice/Purpose

facets

Kind

Value

annotation

enumeration

GIFT

enumeration

NOT_SOLD

enumeration

PERSONAL_EFFECTS

enumeration

REPAIR_AND_RETURN

enumeration

SAMPLE

enumeration

SOLD

source

<xs:simpleType name="PurposeOfShipmentType">

<xs:restriction base="xs:string">

<xs:enumeration value="GIFT"/>

<xs:enumeration value="NOT_SOLD"/>

<xs:enumeration value="PERSONAL_EFFECTS"/>

FedEx Web Services, Rate Services 263

<xs:enumeration value="REPAIR_AND_RETURN"/>

<xs:enumeration value="SAMPLE"/>

<xs:enumeration value="SOLD"/>

</xs:restriction>

</xs:simpleType>

simpleType RateDimensionalDivisorType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ShipmentRateDetail/DimDivisorType

facets

Kind

Value

annotation

enumeration

COUNTRY

enumeration

CUSTOMER

enumeration

OTHER

enumeration

PRODUCT

enumeration

WAIVED

annotation

documentation

Indicates the reason that a dim divisor value was chose.

source

<xs:simpleType name="RateDimensionalDivisorType">

<xs:annotation>

<xs:documentation>Indicates the reason that a dim divisor value was chose.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="COUNTRY"/>

<xs:enumeration value="CUSTOMER"/>

<xs:enumeration value="OTHER"/>

<xs:enumeration value="PRODUCT"/>

<xs:enumeration value="WAIVED"/>

</xs:restriction>

</xs:simpleType>

simpleType RateDiscountType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

RateDiscount/RateDiscountType

FedEx Web Services, Rate Services 264

facets

Kind

Value

annotation

enumeration

BONUS

enumeration

COUPON

enumeration

EARNED

enumeration

OTHER

enumeration

VOLUME

annotation

documentation

Identifies the type of discount applied to the shipment.

source

<xs:simpleType name="RateDiscountType">

<xs:annotation>

<xs:documentation>Identifies the type of discount applied to the shipment.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BONUS"/>

<xs:enumeration value="COUPON"/>

<xs:enumeration value="EARNED"/>

<xs:enumeration value="OTHER"/>

<xs:enumeration value="VOLUME"/>

</xs:restriction>

</xs:simpleType>

simpleType RatedWeightMethod

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

PackageRateDetail/RatedWeightMethod ShipmentRateDetail/RatedWeightMethod

facets

Kind

Value

annotation

enumeration

ACTUAL

enumeration

AVERAGE_PACKAGE_WEIGHT_MINIMUM

enumeration

BALLOON

enumeration

DIM

enumeration

FREIGHT_MINIMUM

enumeration

MIXED

enumeration

OVERSIZE

enumeration

OVERSIZE_1

enumeration

OVERSIZE_2

enumeration

OVERSIZE_3

FedEx Web Services, Rate Services 265

enumeration

PACKAGING_MINIMUM

enumeration

WEIGHT_BREAK

annotation

documentation

The method used to calculate the weight to be used in rating the package..

source

<xs:simpleType name="RatedWeightMethod">

<xs:annotation>

<xs:documentation>The method used to calculate the weight to be used in rating the package..</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="ACTUAL"/>

<xs:enumeration value="AVERAGE_PACKAGE_WEIGHT_MINIMUM"/>

<xs:enumeration value="BALLOON"/>

<xs:enumeration value="DIM"/>

<xs:enumeration value="FREIGHT_MINIMUM"/>

<xs:enumeration value="MIXED"/>

<xs:enumeration value="OVERSIZE"/>

<xs:enumeration value="OVERSIZE_1"/>

<xs:enumeration value="OVERSIZE_2"/>

<xs:enumeration value="OVERSIZE_3"/>

<xs:enumeration value="PACKAGING_MINIMUM"/>

<xs:enumeration value="WEIGHT_BREAK"/>

</xs:restriction>

</xs:simpleType>

simpleType RateElementBasisType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by element

VariableHandlingChargeDetail/RateElementBasis

facets

Kind

Value

annotation

enumeration

BASE_CHARGE

enumeration

NET_CHARGE

enumeration

NET_CHARGE_EXCLUDING_TAXES

enumeration

NET_FREIGHT

annotation

documentation

Selects the value from a set of rate data to which the percentage is applied.

source <xs:simpleType name="RateElementBasisType">

<xs:annotation>

<xs:documentation>Selects the value from a set of rate data to which the percentage is applied.</xs:documentation>

FedEx Web Services, Rate Services 266

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BASE_CHARGE"/>

<xs:enumeration value="NET_CHARGE"/>

<xs:enumeration value="NET_CHARGE_EXCLUDING_TAXES"/>

<xs:enumeration value="NET_FREIGHT"/>

</xs:restriction>

</xs:simpleType>

simpleType RateRequestType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

RequestedShipment/RateRequestTypes

facets Kind

Value

annotation

enumeration

ACCOUNT

enumeration

LIST

annotation

documentation

Indicates the type of rates to be returned.

source

<xs:simpleType name="RateRequestType">

<xs:annotation>

<xs:documentation>Indicates the type of rates to be returned.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="ACCOUNT"/>

<xs:enumeration value="LIST"/>

</xs:restriction>

</xs:simpleType>

simpleType RateTypeBasisType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

CodAddTransportationChargesDetail/RateTypeBasis VariableHandlingChargeDetail/RateTypeBasis

facets

Kind

Value

annotation

enumeration

ACCOUNT

enumeration

LIST

FedEx Web Services, Rate Services 267

annotation

documentation

Select the type of rate from which the element is to be selected.

source

<xs:simpleType name="RateTypeBasisType">

<xs:annotation>

<xs:documentation>Select the type of rate from which the element is to be selected.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="ACCOUNT"/>

<xs:enumeration value="LIST"/>

</xs:restriction>

</xs:simpleType>

simpleType RebateType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

Rebate/RebateType

facets

Kind

Value

annotation

enumeration

BONUS

enumeration

EARNED

enumeration

OTHER

annotation

documentation

Identifies the type of discount applied to the shipment.

source

<xs:simpleType name="RebateType">

<xs:annotation>

<xs:documentation>Identifies the type of discount applied to the shipment.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BONUS"/>

<xs:enumeration value="EARNED"/>

<xs:enumeration value="OTHER"/>

</xs:restriction>

</xs:simpleType>

simpleType RecipientCustomsIdType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

FedEx Web Services, Rate Services 268

used by

element

RecipientCustomsId/Type

facets

Kind

Value

annotation

enumeration

COMPANY

enumeration

INDIVIDUAL

enumeration

PASSPORT

annotation

documentation

Type of Brazilian taxpayer identifier provided in Recipient/TaxPayerIdentification/Number. For shipments bound for Brazil this overrides the value in

Recipient/TaxPayerIdentification/TinType

source

<xs:simpleType name="RecipientCustomsIdType">

<xs:annotation>

<xs:documentation>Type of Brazilian taxpayer identifier provided in Recipient/TaxPayerIdentification/Number. For shipments

bound for Brazil this overrides the value in Recipient/TaxPayerIdentification/TinType</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="COMPANY"/>

<xs:enumeration value="INDIVIDUAL"/>

<xs:enumeration value="PASSPORT"/>

</xs:restriction>

</xs:simpleType>

simpleType RegulatoryControlType

namespace http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CustomsClearanceDetail/RegulatoryControls

facets

Kind

Value

annotation

enumeration

EU_CIRCULATION

enumeration

FOOD_OR_PERISHABLE

enumeration

NAFTA

annotation

documentation

FOOD_OR_PERISHABLE is required by FDA/BTA; must be true for food/perishable items coming to US or PR from non-US/non-PR origin

source

<xs:simpleType name="RegulatoryControlType">

<xs:annotation>

<xs:documentation>FOOD_OR_PERISHABLE is required by FDA/BTA; must be true for food/perishable items coming to US or

PR from non-US/non-PR origin</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="EU_CIRCULATION"/>

<xs:enumeration value="FOOD_OR_PERISHABLE"/>

FedEx Web Services, Rate Services 269

<xs:enumeration value="NAFTA"/>

</xs:restriction>

</xs:simpleType>

simpleType RequestedShippingDocumentType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

elements

EtdDetail/RequestedDocumentCopies ShippingDocumentSpecification/ShippingDocumentTypes

facets

Kind

Value

annotation

enumeration

CERTIFICATE_OF_ORIGIN

enumeration

COMMERCIAL_INVOICE

enumeration

CUSTOMER_SPECIFIED_LABELS

enumeration

GENERAL_AGENCY_AGREEMENT

enumeration

LABEL

enumeration

NAFTA_CERTIFICATE_OF_ORIGIN

enumeration

PRO_FORMA_INVOICE

enumeration

RETURN_INSTRUCTIONS

source

<xs:simpleType name="RequestedShippingDocumentType">

<xs:restriction base="xs:string">

<xs:enumeration value="CERTIFICATE_OF_ORIGIN"/>

<xs:enumeration value="COMMERCIAL_INVOICE"/>

<xs:enumeration value="CUSTOMER_SPECIFIED_LABELS"/>

<xs:enumeration value="GENERAL_AGENCY_AGREEMENT"/>

<xs:enumeration value="LABEL"/>

<xs:enumeration value="NAFTA_CERTIFICATE_OF_ORIGIN"/>

<xs:enumeration value="PRO_FORMA_INVOICE"/>

<xs:enumeration value="RETURN_INSTRUCTIONS"/>

</xs:restriction>

</xs:simpleType>

simpleType RequiredShippingDocumentType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CommitDetail/RequiredDocuments

FedEx Web Services, Rate Services 270

facets

Kind

Value

annotation

enumeration

CANADIAN_B13A

enumeration

CERTIFICATE_OF_ORIGIN

enumeration

COMMERCIAL_INVOICE

enumeration

INTERNATIONAL_AIRWAY_BILL

enumeration

MAIL_SERVICE_AIRWAY_BILL

enumeration

SHIPPERS_EXPORT_DECLARATION

source

<xs:simpleType name="RequiredShippingDocumentType">

<xs:restriction base="xs:string">

<xs:enumeration value="CANADIAN_B13A"/>

<xs:enumeration value="CERTIFICATE_OF_ORIGIN"/>

<xs:enumeration value="COMMERCIAL_INVOICE"/>

<xs:enumeration value="INTERNATIONAL_AIRWAY_BILL"/>

<xs:enumeration value="MAIL_SERVICE_AIRWAY_BILL"/>

<xs:enumeration value="SHIPPERS_EXPORT_DECLARATION"/>

</xs:restriction>

</xs:simpleType>

simpleType ReturnedRateType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by elements

RateReplyDetail/ActualRateType PackageRateDetail/RateType ShipmentRateDetail/RateType

facets

Kind

Value

annotation

enumeration

PAYOR_ACCOUNT_PACKAGE

enumeration

PAYOR_ACCOUNT_SHIPMENT

enumeration

PAYOR_LIST_PACKAGE

enumeration

PAYOR_LIST_SHIPMENT

enumeration

RATED_ACCOUNT_PACKAGE

enumeration

RATED_ACCOUNT_SHIPMENT

enumeration

RATED_LIST_PACKAGE

enumeration

RATED_LIST_SHIPMENT

annotation

documentation

The "PAYOR..." rates are expressed in the currency identified in the payor's rate table(s). The "RATED..." rates are expressed in the currency of the origin

country. Former "...COUNTER..." values have become "...RETAIL..." values, except for PAYOR_COUNTER and RATED_COUNTER, which have been removed.

source

<xs:simpleType name="ReturnedRateType">

<xs:annotation>

FedEx Web Services, Rate Services 271

<xs:documentation>The "PAYOR..." rates are expressed in the currency identified in the payor's rate table(s). The "RATED..."

rates are expressed in the currency of the origin country. Former "...COUNTER..." values have become "...RETAIL..." values,

except for PAYOR_COUNTER and RATED_COUNTER, which have been removed.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="PAYOR_ACCOUNT_PACKAGE"/>

<xs:enumeration value="PAYOR_ACCOUNT_SHIPMENT"/>

<xs:enumeration value="PAYOR_LIST_PACKAGE"/>

<xs:enumeration value="PAYOR_LIST_SHIPMENT"/>

<xs:enumeration value="RATED_ACCOUNT_PACKAGE"/>

<xs:enumeration value="RATED_ACCOUNT_SHIPMENT"/>

<xs:enumeration value="RATED_LIST_PACKAGE"/>

<xs:enumeration value="RATED_LIST_SHIPMENT"/>

</xs:restriction>

</xs:simpleType>

simpleType ReturnEMailAllowedSpecialServiceType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ReturnEMailDetail/AllowedSpecialServices

facets

Kind

Value

annotation

enumeration

SATURDAY_DELIVERY

enumeration

SATURDAY_PICKUP

annotation

documentation

These values are used to control the availability of certain special services at the time when a customer uses the e-mail label link to create a return shipment.

source

<xs:simpleType name="ReturnEMailAllowedSpecialServiceType">

<xs:annotation>

<xs:documentation>These values are used to control the availability of certain special services at the time when a customer

uses the e-mail label link to create a return shipment.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="SATURDAY_DELIVERY"/>

<xs:enumeration value="SATURDAY_PICKUP"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 272

simpleType ReturnType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ReturnShipmentDetail/ReturnType

facets

Kind

Value

annotation

enumeration

FEDEX_TAG

enumeration

PENDING

enumeration

PRINT_RETURN_LABEL

annotation

documentation

The type of return shipment that is being requested.

source

<xs:simpleType name="ReturnType">

<xs:annotation>

<xs:documentation>The type of return shipment that is being requested.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="FEDEX_TAG"/>

<xs:enumeration value="PENDING"/>

<xs:enumeration value="PRINT_RETURN_LABEL"/>

</xs:restriction>

</xs:simpleType>

simpleType SecondaryBarcodeType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CustomerSpecifiedLabelDetail/SecondaryBarcode

facets

Kind

Value

annotation

enumeration

COMMON_2D

enumeration

NONE

enumeration

SSCC_18

enumeration

USPS

source

<xs:simpleType name="SecondaryBarcodeType">

<xs:restriction base="xs:string">

<xs:enumeration value="COMMON_2D"/>

<xs:enumeration value="NONE"/>

<xs:enumeration value="SSCC_18"/>

<xs:enumeration value="USPS"/>

FedEx Web Services, Rate Services 273

</xs:restriction>

</xs:simpleType>

simpleType ServiceOptionType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

CommitDetail/AppliedOptions RateReplyDetail/AppliedOptions RateRequest/VariableOptions

facets Kind

Value

annotation

enumeration

FREIGHT_GUARANTEE

enumeration

SATURDAY_DELIVERY

enumeration

SMART_POST_ALLOWED_INDICIA

enumeration

SMART_POST_HUB_ID

annotation

documentation

These values control the optional features of service that may be combined in a commitment/rate comparision transaction.

source

<xs:simpleType name="ServiceOptionType">

<xs:annotation>

<xs:documentation>These values control the optional features of service that may be combined in a commitment/rate

comparision transaction.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="FREIGHT_GUARANTEE"/>

<xs:enumeration value="SATURDAY_DELIVERY"/>

<xs:enumeration value="SMART_POST_ALLOWED_INDICIA"/>

<xs:enumeration value="SMART_POST_HUB_ID"/>

</xs:restriction>

</xs:simpleType>

simpleType ServiceType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

FreightServiceCenterDetail/LocalService CommitDetail/ServiceType RateReplyDetail/ServiceType RequestedShipment/ServiceType

facets Kind

Value

annotation

enumeration

EUROPE_FIRST_INTERNATIONAL_PRIORITY

enumeration

FEDEX_1_DAY_FREIGHT

enumeration

FEDEX_2_DAY

FedEx Web Services, Rate Services 274

enumeration

FEDEX_2_DAY_AM

enumeration

FEDEX_2_DAY_FREIGHT

enumeration

FEDEX_3_DAY_FREIGHT

enumeration

FEDEX_EXPRESS_SAVER

enumeration

FEDEX_FIRST_FREIGHT

enumeration

FEDEX_FREIGHT_ECONOMY

enumeration

FEDEX_FREIGHT_PRIORITY

enumeration

FEDEX_GROUND

enumeration

FIRST_OVERNIGHT

enumeration

GROUND_HOME_DELIVERY

enumeration

INTERNATIONAL_ECONOMY

enumeration

INTERNATIONAL_ECONOMY_FREIGHT

enumeration

INTERNATIONAL_FIRST

enumeration

INTERNATIONAL_PRIORITY

enumeration

INTERNATIONAL_PRIORITY_FREIGHT

enumeration

PRIORITY_OVERNIGHT

enumeration

SMART_POST

enumeration

STANDARD_OVERNIGHT

annotation

documentation

Identifies the FedEx service to use in shipping the package. See ServiceType for list of valid enumerated values.

source

<xs:simpleType name="ServiceType">

<xs:annotation>

<xs:documentation>Identifies the FedEx service to use in shipping the package. See ServiceType for list of valid enumerated

values.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="EUROPE_FIRST_INTERNATIONAL_PRIORITY"/>

<xs:enumeration value="FEDEX_1_DAY_FREIGHT"/>

<xs:enumeration value="FEDEX_2_DAY"/>

<xs:enumeration value="FEDEX_2_DAY_AM"/>

<xs:enumeration value="FEDEX_2_DAY_FREIGHT"/>

<xs:enumeration value="FEDEX_3_DAY_FREIGHT"/>

<xs:enumeration value="FEDEX_EXPRESS_SAVER"/>

<xs:enumeration value="FEDEX_FIRST_FREIGHT"/>

<xs:enumeration value="FEDEX_FREIGHT_ECONOMY"/>

<xs:enumeration value="FEDEX_FREIGHT_PRIORITY"/>

<xs:enumeration value="FEDEX_GROUND"/>

<xs:enumeration value="FIRST_OVERNIGHT"/>

<xs:enumeration value="GROUND_HOME_DELIVERY"/>

FedEx Web Services, Rate Services 275

<xs:enumeration value="INTERNATIONAL_ECONOMY"/>

<xs:enumeration value="INTERNATIONAL_ECONOMY_FREIGHT"/>

<xs:enumeration value="INTERNATIONAL_FIRST"/>

<xs:enumeration value="INTERNATIONAL_PRIORITY"/>

<xs:enumeration value="INTERNATIONAL_PRIORITY_FREIGHT"/>

<xs:enumeration value="PRIORITY_OVERNIGHT"/>

<xs:enumeration value="SMART_POST"/>

<xs:enumeration value="STANDARD_OVERNIGHT"/>

</xs:restriction>

</xs:simpleType>

simpleType ShipmentSpecialServiceType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

FreightSpecialServicePayment/SpecialService ShipmentSpecialServicesRequested/SpecialServiceTypes

facets Kind

Value

annotation

enumeration

BROKER_SELECT_OPTION

enumeration

CALL_BEFORE_DELIVERY

enumeration

COD

enumeration

CUSTOM_DELIVERY_WINDOW

enumeration

DANGEROUS_GOODS

enumeration

DO_NOT_BREAK_DOWN_PALLETS

enumeration

DO_NOT_STACK_PALLETS

enumeration

DRY_ICE

enumeration

EAST_COAST_SPECIAL

enumeration

ELECTRONIC_TRADE_DOCUMENTS

enumeration

EMAIL_NOTIFICATION

enumeration

EXTREME_LENGTH

enumeration

FOOD

enumeration

FREIGHT_GUARANTEE

enumeration

FUTURE_DAY_SHIPMENT

enumeration

HOLD_AT_LOCATION

enumeration

HOME_DELIVERY_PREMIUM

enumeration

INSIDE_DELIVERY

enumeration

INSIDE_PICKUP

FedEx Web Services, Rate Services 276

enumeration

LIFTGATE_DELIVERY

enumeration

LIFTGATE_PICKUP

enumeration

LIMITED_ACCESS_DELIVERY

enumeration

LIMITED_ACCESS_PICKUP

enumeration

PENDING_SHIPMENT

enumeration

POISON

enumeration

PROTECTION_FROM_FREEZING

enumeration

RETURN_SHIPMENT

enumeration

SATURDAY_DELIVERY

enumeration

SATURDAY_PICKUP

enumeration

TOP_LOAD

annotation

documentation

Identifies the collection of special service offered by FedEx.

source

<xs:simpleType name="ShipmentSpecialServiceType">

<xs:annotation>

<xs:documentation>Identifies the collection of special service offered by FedEx.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="BROKER_SELECT_OPTION"/>

<xs:enumeration value="CALL_BEFORE_DELIVERY"/>

<xs:enumeration value="COD"/>

<xs:enumeration value="CUSTOM_DELIVERY_WINDOW"/>

<xs:enumeration value="DANGEROUS_GOODS"/>

<xs:enumeration value="DO_NOT_BREAK_DOWN_PALLETS"/>

<xs:enumeration value="DO_NOT_STACK_PALLETS"/>

<xs:enumeration value="DRY_ICE"/>

<xs:enumeration value="EAST_COAST_SPECIAL"/>

<xs:enumeration value="ELECTRONIC_TRADE_DOCUMENTS"/>

<xs:enumeration value="EMAIL_NOTIFICATION"/>

<xs:enumeration value="EXTREME_LENGTH"/>

<xs:enumeration value="FOOD"/>

<xs:enumeration value="FREIGHT_GUARANTEE"/>

<xs:enumeration value="FUTURE_DAY_SHIPMENT"/>

<xs:enumeration value="HOLD_AT_LOCATION"/>

<xs:enumeration value="HOME_DELIVERY_PREMIUM"/>

<xs:enumeration value="INSIDE_DELIVERY"/>

<xs:enumeration value="INSIDE_PICKUP"/>

<xs:enumeration value="LIFTGATE_DELIVERY"/>

<xs:enumeration value="LIFTGATE_PICKUP"/>

<xs:enumeration value="LIMITED_ACCESS_DELIVERY"/>

FedEx Web Services, Rate Services 277

<xs:enumeration value="LIMITED_ACCESS_PICKUP"/>

<xs:enumeration value="PENDING_SHIPMENT"/>

<xs:enumeration value="POISON"/>

<xs:enumeration value="PROTECTION_FROM_FREEZING"/>

<xs:enumeration value="RETURN_SHIPMENT"/>

<xs:enumeration value="SATURDAY_DELIVERY"/>

<xs:enumeration value="SATURDAY_PICKUP"/>

<xs:enumeration value="TOP_LOAD"/>

</xs:restriction>

</xs:simpleType>

simpleType ShippingDocumentDispositionType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ShippingDocumentDispositionDetail/DispositionType

facets

Kind

Value

annotation

enumeration

CONFIRMED

enumeration

DEFERRED_RETURNED

enumeration

DEFERRED_STORED

enumeration

EMAILED

enumeration

QUEUED

enumeration

RETURNED

enumeration

STORED

annotation

documentation

Specifies how to return a shipping document to the caller.

source

<xs:simpleType name="ShippingDocumentDispositionType">

<xs:annotation>

<xs:documentation>Specifies how to return a shipping document to the caller.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CONFIRMED"/>

<xs:enumeration value="DEFERRED_RETURNED"/>

<xs:enumeration value="DEFERRED_STORED"/>

<xs:enumeration value="EMAILED"/>

<xs:enumeration value="QUEUED"/>

<xs:enumeration value="RETURNED"/>

<xs:enumeration value="STORED"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 278

simpleType ShippingDocumentEMailGroupingType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ShippingDocumentEMailDetail/Grouping

facets

Kind

Value

annotation

enumeration

BY_RECIPIENT

enumeration

NONE

source <xs:simpleType name="ShippingDocumentEMailGroupingType">

<xs:restriction base="xs:string">

<xs:enumeration value="BY_RECIPIENT"/>

<xs:enumeration value="NONE"/>

</xs:restriction>

</xs:simpleType>

simpleType ShippingDocumentGroupingType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

element

ShippingDocumentDispositionDetail/Grouping

facets

Kind

Value

annotation

enumeration

CONSOLIDATED_BY_DOCUMENT_TYPE

enumeration

INDIVIDUAL

annotation

documentation

Specifies how to organize all shipping documents of the same type.

source

<xs:simpleType name="ShippingDocumentGroupingType">

<xs:annotation>

<xs:documentation>Specifies how to organize all shipping documents of the same type.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CONSOLIDATED_BY_DOCUMENT_TYPE"/>

<xs:enumeration value="INDIVIDUAL"/>

</xs:restriction>

</xs:simpleType>

simpleType ShippingDocumentImageType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

FedEx Web Services, Rate Services 279

used by

elements

LabelSpecification/ImageType ShippingDocumentFormat/ImageType

facets

Kind

Value

annotation

enumeration

DPL

enumeration

EPL2

enumeration

PDF

enumeration

PNG

enumeration

ZPLII

annotation

documentation

Specifies the image format used for a shipping document.

source

<xs:simpleType name="ShippingDocumentImageType">

<xs:annotation>

<xs:documentation>Specifies the image format used for a shipping document.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="DPL"/>

<xs:enumeration value="EPL2"/>

<xs:enumeration value="PDF"/>

<xs:enumeration value="PNG"/>

<xs:enumeration value="ZPLII"/>

</xs:restriction>

</xs:simpleType>

simpleType ShippingDocumentStockType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ShippingDocumentFormat/StockType

facets

Kind

Value

annotation

enumeration

OP_900_LG_B

enumeration

OP_900_LL_B

enumeration

PAPER_4X6

enumeration

PAPER_LETTER

enumeration

STOCK_4X6

enumeration

STOCK_4X6.75_LEADING_DOC_TAB

enumeration

STOCK_4X6.75_TRAILING_DOC_TAB

enumeration

STOCK_4X8

enumeration

STOCK_4X9_LEADING_DOC_TAB

FedEx Web Services, Rate Services 280

enumeration

STOCK_4X9_TRAILING_DOC_TAB

annotation

documentation

Specifies the type of paper (stock) on which a document will be printed.

source

<xs:simpleType name="ShippingDocumentStockType">

<xs:annotation>

<xs:documentation>Specifies the type of paper (stock) on which a document will be printed.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="OP_900_LG_B"/>

<xs:enumeration value="OP_900_LL_B"/>

<xs:enumeration value="PAPER_4X6"/>

<xs:enumeration value="PAPER_LETTER"/>

<xs:enumeration value="STOCK_4X6"/>

<xs:enumeration value="STOCK_4X6.75_LEADING_DOC_TAB"/>

<xs:enumeration value="STOCK_4X6.75_TRAILING_DOC_TAB"/>

<xs:enumeration value="STOCK_4X8"/>

<xs:enumeration value="STOCK_4X9_LEADING_DOC_TAB"/>

<xs:enumeration value="STOCK_4X9_TRAILING_DOC_TAB"/>

</xs:restriction>

</xs:simpleType>

simpleType SignatureOptionType

namespace

http://fedex.com/ws/rate/v10

type restriction of xs:string

used by

elements

SignatureOptionDetail/OptionType RateReplyDetail/SignatureOption

facets

Kind

Value

annotation

enumeration

ADULT

enumeration

DIRECT

enumeration

INDIRECT

enumeration

NO_SIGNATURE_REQUIRED

enumeration

SERVICE_DEFAULT

annotation

documentation

Identifies the delivery signature services options offered by FedEx.

source

<xs:simpleType name="SignatureOptionType">

<xs:annotation>

<xs:documentation>Identifies the delivery signature services options offered by FedEx.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

FedEx Web Services, Rate Services 281

<xs:enumeration value="ADULT"/>

<xs:enumeration value="DIRECT"/>

<xs:enumeration value="INDIRECT"/>

<xs:enumeration value="NO_SIGNATURE_REQUIRED"/>

<xs:enumeration value="SERVICE_DEFAULT"/>

</xs:restriction>

</xs:simpleType>

simpleType SmartPostAncillaryEndorsementType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

SmartPostShipmentDetail/AncillaryEndorsement

facets

Kind

Value

annotation

enumeration

ADDRESS_CORRECTION

enumeration

CARRIER_LEAVE_IF_NO_RESPONSE

enumeration

CHANGE_SERVICE

enumeration

FORWARDING_SERVICE

enumeration

RETURN_SERVICE

annotation

documentation

These values are mutually exclusive; at most one of them can be attached to a SmartPost shipment.

source

<xs:simpleType name="SmartPostAncillaryEndorsementType">

<xs:annotation>

<xs:documentation>These values are mutually exclusive; at most one of them can be attached to a SmartPost

shipment.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="ADDRESS_CORRECTION"/>

<xs:enumeration value="CARRIER_LEAVE_IF_NO_RESPONSE"/>

<xs:enumeration value="CHANGE_SERVICE"/>

<xs:enumeration value="FORWARDING_SERVICE"/>

<xs:enumeration value="RETURN_SERVICE"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 282

simpleType SmartPostIndiciaType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

SmartPostShipmentDetail/Indicia ServiceSubOptionDetail/SmartPostIndicia

facets

Kind

Value

annotation

enumeration

MEDIA_MAIL

enumeration

PARCEL_RETURN

enumeration

PARCEL_SELECT

enumeration

PRESORTED_BOUND_PRINTED_MATTER

enumeration

PRESORTED_STANDARD

source

<xs:simpleType name="SmartPostIndiciaType">

<xs:restriction base="xs:string">

<xs:enumeration value="MEDIA_MAIL"/>

<xs:enumeration value="PARCEL_RETURN"/>

<xs:enumeration value="PARCEL_SELECT"/>

<xs:enumeration value="PRESORTED_BOUND_PRINTED_MATTER"/>

<xs:enumeration value="PRESORTED_STANDARD"/>

</xs:restriction>

</xs:simpleType>

simpleType SpecialRatingAppliedType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

ShipmentRateDetail/SpecialRatingApplied

facets

Kind

Value

annotation

enumeration

FIXED_FUEL_SURCHARGE

enumeration

IMPORT_PRICING

annotation

documentation

Indicates which special rating cases applied to this shipment.

source

<xs:simpleType name="SpecialRatingAppliedType">

<xs:annotation>

<xs:documentation>Indicates which special rating cases applied to this shipment.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="FIXED_FUEL_SURCHARGE"/>

<xs:enumeration value="IMPORT_PRICING"/>

FedEx Web Services, Rate Services 283

</xs:restriction>

</xs:simpleType>

simpleType SurchargeLevelType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

Surcharge/Level

facets Kind

Value

annotation

enumeration

PACKAGE

enumeration

SHIPMENT

source

<xs:simpleType name="SurchargeLevelType">

<xs:restriction base="xs:string">

<xs:enumeration value="PACKAGE"/>

<xs:enumeration value="SHIPMENT"/>

</xs:restriction>

</xs:simpleType>

simpleType SurchargeType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

Surcharge/SurchargeType

facets

Kind

Value

annotation

enumeration

ADDITIONAL_HANDLING

enumeration

ANCILLARY_FEE

enumeration

APPOINTMENT_DELIVERY

enumeration

BROKER_SELECT_OPTION

enumeration

CANADIAN_DESTINATION

enumeration

CLEARANCE_ENTRY_FEE

enumeration

COD

enumeration

CUT_FLOWERS

enumeration

DANGEROUS_GOODS

enumeration

DELIVERY_AREA

enumeration

DELIVERY_CONFIRMATION

enumeration

DOCUMENTATION_FEE

FedEx Web Services, Rate Services 284

enumeration

DRY_ICE

enumeration

EMAIL_LABEL

enumeration

EUROPE_FIRST

enumeration

EXCESS_VALUE

enumeration

EXHIBITION

enumeration

EXPORT

enumeration

EXTREME_LENGTH

enumeration

FEDEX_TAG

enumeration

FICE

enumeration

FLATBED

enumeration

FREIGHT_GUARANTEE

enumeration

FREIGHT_ON_VALUE

enumeration

FUEL

enumeration

HOLD_AT_LOCATION

enumeration

HOME_DELIVERY_APPOINTMENT

enumeration

HOME_DELIVERY_DATE_CERTAIN

enumeration

HOME_DELIVERY_EVENING

enumeration

INSIDE_DELIVERY

enumeration

INSIDE_PICKUP

enumeration

INSURED_VALUE

enumeration

INTERHAWAII

enumeration

LIFTGATE_DELIVERY

enumeration

LIFTGATE_PICKUP

enumeration

LIMITED_ACCESS_DELIVERY

enumeration

LIMITED_ACCESS_PICKUP

enumeration

METRO_DELIVERY

enumeration

METRO_PICKUP

enumeration

NON_MACHINABLE

enumeration

OFFSHORE

enumeration

ON_CALL_PICKUP

enumeration

OTHER

enumeration

OUT_OF_DELIVERY_AREA

enumeration

OUT_OF_PICKUP_AREA

enumeration

OVERSIZE

enumeration

OVER_DIMENSION

FedEx Web Services, Rate Services 285

enumeration

PIECE_COUNT_VERIFICATION

enumeration

PRE_DELIVERY_NOTIFICATION

enumeration

PRIORITY_ALERT

enumeration

PROTECTION_FROM_FREEZING

enumeration

REGIONAL_MALL_DELIVERY

enumeration

REGIONAL_MALL_PICKUP

enumeration

RESIDENTIAL_DELIVERY

enumeration

RESIDENTIAL_PICKUP

enumeration

RETURN_LABEL

enumeration

SATURDAY_DELIVERY

enumeration

SATURDAY_PICKUP

enumeration

SIGNATURE_OPTION

enumeration

TARP

enumeration

THIRD_PARTY_CONSIGNEE

enumeration

TRANSMART_SERVICE_FEE

source <xs:simpleType name="SurchargeType">

<xs:restriction base="xs:string">

<xs:enumeration value="ADDITIONAL_HANDLING"/>

<xs:enumeration value="ANCILLARY_FEE"/>

<xs:enumeration value="APPOINTMENT_DELIVERY"/>

<xs:enumeration value="BROKER_SELECT_OPTION"/>

<xs:enumeration value="CANADIAN_DESTINATION"/>

<xs:enumeration value="CLEARANCE_ENTRY_FEE"/>

<xs:enumeration value="COD"/>

<xs:enumeration value="CUT_FLOWERS"/>

<xs:enumeration value="DANGEROUS_GOODS"/>

<xs:enumeration value="DELIVERY_AREA"/>

<xs:enumeration value="DELIVERY_CONFIRMATION"/>

<xs:enumeration value="DOCUMENTATION_FEE"/>

<xs:enumeration value="DRY_ICE"/>

<xs:enumeration value="EMAIL_LABEL"/>

<xs:enumeration value="EUROPE_FIRST"/>

<xs:enumeration value="EXCESS_VALUE"/>

<xs:enumeration value="EXHIBITION"/>

<xs:enumeration value="EXPORT"/>

<xs:enumeration value="EXTREME_LENGTH"/>

<xs:enumeration value="FEDEX_TAG"/>

<xs:enumeration value="FICE"/>

<xs:enumeration value="FLATBED"/>

FedEx Web Services, Rate Services 286

<xs:enumeration value="FREIGHT_GUARANTEE"/>

<xs:enumeration value="FREIGHT_ON_VALUE"/>

<xs:enumeration value="FUEL"/>

<xs:enumeration value="HOLD_AT_LOCATION"/>

<xs:enumeration value="HOME_DELIVERY_APPOINTMENT"/>

<xs:enumeration value="HOME_DELIVERY_DATE_CERTAIN"/>

<xs:enumeration value="HOME_DELIVERY_EVENING"/>

<xs:enumeration value="INSIDE_DELIVERY"/>

<xs:enumeration value="INSIDE_PICKUP"/>

<xs:enumeration value="INSURED_VALUE"/>

<xs:enumeration value="INTERHAWAII"/>

<xs:enumeration value="LIFTGATE_DELIVERY"/>

<xs:enumeration value="LIFTGATE_PICKUP"/>

<xs:enumeration value="LIMITED_ACCESS_DELIVERY"/>

<xs:enumeration value="LIMITED_ACCESS_PICKUP"/>

<xs:enumeration value="METRO_DELIVERY"/>

<xs:enumeration value="METRO_PICKUP"/>

<xs:enumeration value="NON_MACHINABLE"/>

<xs:enumeration value="OFFSHORE"/>

<xs:enumeration value="ON_CALL_PICKUP"/>

<xs:enumeration value="OTHER"/>

<xs:enumeration value="OUT_OF_DELIVERY_AREA"/>

<xs:enumeration value="OUT_OF_PICKUP_AREA"/>

<xs:enumeration value="OVERSIZE"/>

<xs:enumeration value="OVER_DIMENSION"/>

<xs:enumeration value="PIECE_COUNT_VERIFICATION"/>

<xs:enumeration value="PRE_DELIVERY_NOTIFICATION"/>

<xs:enumeration value="PRIORITY_ALERT"/>

<xs:enumeration value="PROTECTION_FROM_FREEZING"/>

<xs:enumeration value="REGIONAL_MALL_DELIVERY"/>

<xs:enumeration value="REGIONAL_MALL_PICKUP"/>

<xs:enumeration value="RESIDENTIAL_DELIVERY"/>

<xs:enumeration value="RESIDENTIAL_PICKUP"/>

<xs:enumeration value="RETURN_LABEL"/>

<xs:enumeration value="SATURDAY_DELIVERY"/>

<xs:enumeration value="SATURDAY_PICKUP"/>

<xs:enumeration value="SIGNATURE_OPTION"/>

<xs:enumeration value="TARP"/>

<xs:enumeration value="THIRD_PARTY_CONSIGNEE"/>

<xs:enumeration value="TRANSMART_SERVICE_FEE"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 287

simpleType TaxesOrMiscellaneousChargeType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CommercialInvoice/TaxesOrMiscellaneousChargeType

facets

Kind

Value

annotation

enumeration

COMMISSIONS

enumeration

DISCOUNTS

enumeration

HANDLING_FEES

enumeration

OTHER

enumeration

ROYALTIES_AND_LICENSE_FEES

enumeration

TAXES

annotation

documentation

Specifice the kind of tax or miscellaneous charge being reported on a Commercial Invoice.

source <xs:simpleType name="TaxesOrMiscellaneousChargeType">

<xs:annotation>

<xs:documentation>Specifice the kind of tax or miscellaneous charge being reported on a Commercial

Invoice.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="COMMISSIONS"/>

<xs:enumeration value="DISCOUNTS"/>

<xs:enumeration value="HANDLING_FEES"/>

<xs:enumeration value="OTHER"/>

<xs:enumeration value="ROYALTIES_AND_LICENSE_FEES"/>

<xs:enumeration value="TAXES"/>

</xs:restriction>

</xs:simpleType>

simpleType TaxType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by element

Tax/TaxType

facets

Kind

Value

annotation

enumeration

EXPORT

enumeration

GST

enumeration

HST

FedEx Web Services, Rate Services 288

enumeration

INTRACOUNTRY

enumeration

OTHER

enumeration

PST

enumeration

VAT

source

<xs:simpleType name="TaxType">

<xs:restriction base="xs:string">

<xs:enumeration value="EXPORT"/>

<xs:enumeration value="GST"/>

<xs:enumeration value="HST"/>

<xs:enumeration value="INTRACOUNTRY"/>

<xs:enumeration value="OTHER"/>

<xs:enumeration value="PST"/>

<xs:enumeration value="VAT"/>

</xs:restriction>

</xs:simpleType>

simpleType TermsOfSaleType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

CommercialInvoice/TermsOfSale

facets

Kind

Value

annotation

enumeration

CFR_OR_CPT

enumeration

CIF_OR_CIP

enumeration

DDP

enumeration

DDU

enumeration

EXW

enumeration

FOB_OR_FCA

annotation

documentation

Required for dutiable international express or ground shipment. This field is not applicable to an international PIB (document) or a non-document

which does not require a commercial invoice express shipment.

CFR_OR_CPT (Cost and Freight/Carriage Paid TO)

CIF_OR_CIP (Cost Insurance and Freight/Carraige Insurance Paid)

DDP (Delivered Duty Paid)

DDU (Delivered Duty Unpaid)

EXW (Ex Works)

FOB_OR_FCA (Free On Board/Free Carrier)

FedEx Web Services, Rate Services 289

source

<xs:simpleType name="TermsOfSaleType">

<xs:annotation>

<xs:documentation>

Required for dutiable international express or ground shipment. This field is not applicable to an international PIB

(document) or a non-document which does not require a commercial invoice express shipment.

CFR_OR_CPT (Cost and Freight/Carriage Paid TO)

CIF_OR_CIP (Cost Insurance and Freight/Carraige Insurance Paid)

DDP (Delivered Duty Paid)

DDU (Delivered Duty Unpaid)

EXW (Ex Works)

FOB_OR_FCA (Free On Board/Free Carrier)

</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CFR_OR_CPT"/>

<xs:enumeration value="CIF_OR_CIP"/>

<xs:enumeration value="DDP"/>

<xs:enumeration value="DDU"/>

<xs:enumeration value="EXW"/>

<xs:enumeration value="FOB_OR_FCA"/>

</xs:restriction>

</xs:simpleType>

simpleType TinType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

TaxpayerIdentification/TinType

facets

Kind

Value

annotation

enumeration

BUSINESS_NATIONAL

enumeration

BUSINESS_STATE

enumeration

PERSONAL_NATIONAL

enumeration

PERSONAL_STATE

annotation

documentation

Identifies the category of the taxpayer identification number.

source

<xs:simpleType name="TinType">

<xs:annotation>

<xs:documentation>Identifies the category of the taxpayer identification number.</xs:documentation>

</xs:annotation>

FedEx Web Services, Rate Services 290

<xs:restriction base="xs:string">

<xs:enumeration value="BUSINESS_NATIONAL"/>

<xs:enumeration value="BUSINESS_STATE"/>

<xs:enumeration value="PERSONAL_NATIONAL"/>

<xs:enumeration value="PERSONAL_STATE"/>

</xs:restriction>

</xs:simpleType>

simpleType TrackingIdType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

TrackingId/TrackingIdType

facets

Kind

Value

annotation

enumeration

EXPRESS

enumeration

FEDEX

enumeration

GROUND

enumeration

USPS

source

<xs:simpleType name="TrackingIdType">

<xs:restriction base="xs:string">

<xs:enumeration value="EXPRESS"/>

<xs:enumeration value="FEDEX"/>

<xs:enumeration value="GROUND"/>

<xs:enumeration value="USPS"/>

</xs:restriction>

</xs:simpleType>

simpleType TransitTimeType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

CommitDetail/MaximumTransitTime RateReplyDetail/MaximumTransitTime CommitDetail/TransitTime RateReplyDetail/TransitTime

facets

Kind

Value

annotation

enumeration

EIGHTEEN_DAYS

enumeration

EIGHT_DAYS

enumeration

ELEVEN_DAYS

FedEx Web Services, Rate Services 291

enumeration

FIFTEEN_DAYS

enumeration

FIVE_DAYS

enumeration

FOURTEEN_DAYS

enumeration

FOUR_DAYS

enumeration

NINETEEN_DAYS

enumeration

NINE_DAYS

enumeration

ONE_DAY

enumeration

SEVENTEEN_DAYS

enumeration

SEVEN_DAYS

enumeration

SIXTEEN_DAYS

enumeration

SIX_DAYS

enumeration

TEN_DAYS

enumeration

THIRTEEN_DAYS

enumeration

THREE_DAYS

enumeration

TWELVE_DAYS

enumeration

TWENTY_DAYS

enumeration

TWO_DAYS

enumeration

UNKNOWN

annotation

documentation

Time in transit from pickup to delivery.

source

<xs:simpleType name="TransitTimeType">

<xs:annotation>

<xs:documentation>Time in transit from pickup to delivery.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="EIGHTEEN_DAYS"/>

<xs:enumeration value="EIGHT_DAYS"/>

<xs:enumeration value="ELEVEN_DAYS"/>

<xs:enumeration value="FIFTEEN_DAYS"/>

<xs:enumeration value="FIVE_DAYS"/>

<xs:enumeration value="FOURTEEN_DAYS"/>

<xs:enumeration value="FOUR_DAYS"/>

<xs:enumeration value="NINETEEN_DAYS"/>

<xs:enumeration value="NINE_DAYS"/>

<xs:enumeration value="ONE_DAY"/>

<xs:enumeration value="SEVENTEEN_DAYS"/>

<xs:enumeration value="SEVEN_DAYS"/>

<xs:enumeration value="SIXTEEN_DAYS"/>

<xs:enumeration value="SIX_DAYS"/>

FedEx Web Services, Rate Services 292

<xs:enumeration value="TEN_DAYS"/>

<xs:enumeration value="THIRTEEN_DAYS"/>

<xs:enumeration value="THREE_DAYS"/>

<xs:enumeration value="TWELVE_DAYS"/>

<xs:enumeration value="TWENTY_DAYS"/>

<xs:enumeration value="TWO_DAYS"/>

<xs:enumeration value="UNKNOWN"/>

</xs:restriction>

</xs:simpleType>

simpleType UploadDocumentIdProducer

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

UploadDocumentReferenceDetail/DocumentIdProducer

facets

Kind

Value

annotation

enumeration

CUSTOMER

enumeration

FEDEX_CSHP

enumeration

FEDEX_GTM

source

<xs:simpleType name="UploadDocumentIdProducer">

<xs:restriction base="xs:string">

<xs:enumeration value="CUSTOMER"/>

<xs:enumeration value="FEDEX_CSHP"/>

<xs:enumeration value="FEDEX_GTM"/>

</xs:restriction>

</xs:simpleType>

simpleType UploadDocumentProducerType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

elements

UploadDocumentDetail/DocumentProducer UploadDocumentReferenceDetail/DocumentProducer

facets

Kind

Value

annotation

enumeration

CUSTOMER

enumeration

FEDEX_CLS

enumeration

FEDEX_GTM

enumeration

OTHER

FedEx Web Services, Rate Services 293

source

<xs:simpleType name="UploadDocumentProducerType">

<xs:restriction base="xs:string">

<xs:enumeration value="CUSTOMER"/>

<xs:enumeration value="FEDEX_CLS"/>

<xs:enumeration value="FEDEX_GTM"/>

<xs:enumeration value="OTHER"/>

</xs:restriction>

</xs:simpleType>

simpleType UploadDocumentType

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by elements

UploadDocumentDetail/DocumentType UploadDocumentReferenceDetail/DocumentType

facets

Kind

Value

annotation

enumeration

CERTIFICATE_OF_ORIGIN

enumeration

COMMERCIAL_INVOICE

enumeration

ETD_LABEL

enumeration

NAFTA_CERTIFICATE_OF_ORIGIN

enumeration

OTHER

enumeration

PRO_FORMA_INVOICE

source

<xs:simpleType name="UploadDocumentType">

<xs:restriction base="xs:string">

<xs:enumeration value="CERTIFICATE_OF_ORIGIN"/>

<xs:enumeration value="COMMERCIAL_INVOICE"/>

<xs:enumeration value="ETD_LABEL"/>

<xs:enumeration value="NAFTA_CERTIFICATE_OF_ORIGIN"/>

<xs:enumeration value="OTHER"/>

<xs:enumeration value="PRO_FORMA_INVOICE"/>

</xs:restriction>

</xs:simpleType>

simpleType VolumeUnits

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

FedEx Web Services, Rate Services 294

used by

element

Volume/Units

facets

Kind

Value

annotation

enumeration

CUBIC_FT

enumeration

CUBIC_M

annotation documentation

Units of three-dimensional volume/cubic measure.

source <xs:simpleType name="VolumeUnits">

<xs:annotation>

<xs:documentation>Units of three-dimensional volume/cubic measure.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="CUBIC_FT"/>

<xs:enumeration value="CUBIC_M"/>

</xs:restriction>

</xs:simpleType>

simpleType WeightUnits

namespace

http://fedex.com/ws/rate/v10

type

restriction of xs:string

used by

element

Weight/Units

facets

Kind

Value

annotation

enumeration

annotation documentation

Identifies the unit of measure associated with a weight value. See WeightUnits for the list of valid enumerated values.

source

<xs:simpleType name="WeightUnits">

<xs:annotation>

<xs:documentation>Identifies the unit of measure associated with a weight value. See WeightUnits for the list of valid

enumerated values.</xs:documentation>

</xs:annotation>

<xs:restriction base="xs:string">

<xs:enumeration value="KG"/>

<xs:enumeration value="LB"/>

</xs:restriction>

</xs:simpleType>

FedEx Web Services, Rate Services 295

Tmp2387186775075032453 Fed Ex Rate Services WSDL Guide

Navigation menu

Versions of this User Manual:

Views

Navigation