MPG2 H™ Manually Operated Pressure Generator Controllerfor Hydraulic Fluke H Controller For Pressure_1 Data Sheet Brochure
User Manual: Fluke-MPG2-H-Manually-Operated-Pressure-Generator-Controller-for-Hydraulic-Pressure_1-data-sheet-Brochure
Open the PDF directly: View PDF 
.
Page Count: 2
Technical Data
MPG2-H is a compact, easy-to-use and economi-
cal system for manually generating and adjusting
pressure from atmosphere to as high as 200 MPa
(30 000 psi) in systems where precise pressure
adjustment is required.
MPG2-H is very well suited for use as the pres-
sure generating and controlling component in
calibration and testing systems using a digital or
analog pressure indicator as a reference. It is also
ideal for working with oil operated piston gauges.
MPG2-H is the standard choice for manual pres-
sure generation and control in a DHI PG7302 high
performance oil operated piston gauge system
in which power assisted or automated pressure
control is not needed.
The MPG2-H is for pressure up to 200 MPa
(30 000 psi). The MPG2-H-HV is for larger test
volumes with a maximum pressure of 100 MPa
(15 000 psi).
MPG2 includes three different means of filling,
priming, generating and adjusting pressure.
Filling and priming are accomplished with a
syringe style priming pump built into the reservoir
cover. The priming pump draws fluid directly from
the reservoir and injects it through MPG2 and out
its test port, filling the test system and generating
a low starting pressure.
The main generating and adjusting element is
a screw press variable volume. Operation of the
variable volume is smooth and silent, requiring
low torque even at the highest pressures. The
screw threads through the handle so the handle
rotates in the same position as the piston moves.
Piston position is clearly indicated on the top of
the MPG2 housing. The variable volume is able
to set pressure very precisely (typically within
0.01 % of the set pressure). For extremely fine
pressure adjustment (typically to within 0.001 %
of the set pressure) the test shut off valve is used
as a miniature variable volume.
Two test ports with standard, high pressure
gland and collar fittings are provided to connect
the MPG2 to the system into which pressure is
to be set. The test ports are on the top and rear
of the unit.
All the operating elements of MPG2 are inte-
grated into a compact, protective housing. The
individual MPG2 components are off-the-shelf
assemblies that are easily accessed for repair or
replacement.
MPG2-H
™
Manually Operated
Pressure Generator
Controller for Hydraulic
Pressure
For hydraulic applications requiring partial or fully automated pressure
generation and control, see the OPG1 power assisted generator and
PPCH fully automated digital pressure controller.
Fluke Calibration
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2010 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 6/2010 3346326B B-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Keeping your world
up and running.®
2 Fluke Corporation MPG2-H™ Manually Operated Pressure Generator Controllerfor Hydraulic Pressure
1. Reservoir cover
2. Priming pump
3. Reservoir vent valve
4. TEST1 connection
5. TEST2 connection
6. Test shut off valve and
fine pressure adjustment
7. Variable volume
8. Reservoir shut off valve
Hydraulic schematic and dimensions
MPG2-H MPG2-H-HV
Maximum pressure 200 MPa (30 000 psi) 100 MPa (15 000 psi)
Variable volume displacement 3 cc (0.18 cu in) 7 cc (0.45 cu in)
Reservoir capacity 300 cc (18.3 cu in)
Test connections DH500 (equivalent to AE F250C, HIP HF4, etc.)
Weight 10 kg (22 lb)
Dimensions (W x H x D) 400 mm x 136 mm x 300 mm (15.7 in x 5.4 in x 11.8 in)
Operating fluid Any non-corrosive oil, water, water/alcohol. Inquire about other fluids.
Specications
Ordering information
Model
MPG2-H Manual pressure generator complete with user's manual.
MPG2-H-HV Manual pressure generator complete with user's manual.
Includes: Manual
Accessories
Fluid, Sebacate Oil, 1 qt.
2 3
4
5
6
7
8
1
136 mm
(5.4 in.)
103 mm
(4.05 in.)
400 mm
(15.7 in.)
300 mm
(11.8 in.)
18 mm
(.708 in.)
396 mm
(15.6 in.)
78 mm
(3.7 in.)
