Fluke Microscanner Pro Datasheet
User Manual: Fluke-Microscanner-Pro-Datasheet Igor's of metalworking and electrical manuals
Open the PDF directly: View PDF 
.
Page Count: 4
MicroScanner™Pro
The essential cable verification tester
The MicroScanner™ Pro is a powerful verification tool designed to confirm basic
installation quality of multiple cable types. It automates the testing of cable conductor
continuity and configuration, and provides necessary information to rapidly solve prob-
lems including the location of cable faults. MicroScanner Pro tests coaxial cable (RG6,
RG59, etc., for CATV/CCTV), twisted pair cable (UTP/STP/SSTP), and other wiring for
audio, control, security or basic telephone service. The MicroScanner Pro speeds basic
live network testing with powerful network tap service and speed identification.
Quickly identify problems
Use the MicroScanner Pro for verification to ensure basic continuity and correct
terminations. The wiremap test checks end-to-end continuity on all UTP cable
four-wire pairs to quickly verify if the cable under
test has the correct wiring scheme (either 568A
or 568B) and identifies any cabling problems.
MicroScanner Pro quickly identifies a fault (see
Figure 1), allowing you to see opens, shorts,
crossed pairs, split pairs or any miswires.
Verify the
Quality of Your
Installation
Verification is the minimum indicator
of installation quality for many cabling
types, and plays an important role in
the success of any Voice, Datacom, or
Video (VDV) cabling installation.
Whether you’re performing new cabling
installations or working with existing
cabling infrastructure for moves,
additions, or configuration changes,
you can quickly verify your work with
an affordable test tool and have
confidence in a quality installation.
What is verification testing?
Verification testing confirms that a
cable meets established national or
international standards of conductor
configuration and passes basic
continuity testing. Verification may
be performed on two conductors or
multi-conductor twisted pair cabling.
Look to Fluke Networks’ MicroScanner
Pro and MicroMapper to perform
basic verification testing, as well as
troubleshoot and solve wiring mistakes
before they become real problems.
Both award-winning products are
backed by the superior support you’ve
come to expect from Fluke Networks,
the leader in network testing.
See how to ensure cable configuration quality with
Fluke Networks verification tools
Figure 1. Pairs 1-2 are shorted.
99 Washington Street
Melrose, MA 02176
Fax 781-665-0780
TestEquipmentDepot.com
to attach to the far end of the link (at the
workstation/office) and the MicroScanner
Pro will display the office number on the
display (see Figure 5).
Troubleshooting tools save
you time
What happens when a fault is detected?
You waste valuable time with visual
inspection or troubleshooting by process
of elimination. With the push of a button,
MicroScanner Pro’s length function uses
Time Domain Reflectometry (TDR). TDR
acts like “cable radar” to measure the
distance to an open or short in each
conductor pair, or the overall length of
the cable. TDR provides the critical infor-
mation necessary to determine whether
to repair punched down conductors at the
block, replace a port or connector, or pull
a new cable. Overall cable length meas-
urement is useful for tracking cable usage
for billing and inventory purposes.
TDR even identifies the distance to active
network taps such as hubs or nic cards.
Identify active network
connections
MicroScanner Pro’s active network identifi-
cation mode flashes hub ports and shows
you if a network tap is operating at 10
Mbps or 10/100 Mbps and whether it is
full or half duplex capable. It also identi-
fies workstation network interface cards.
Tracing and locating cables
MicroScanner Pro’s toner function allows
you to generate a 1000 Hz tone detectable
by standard analog probes to trace and
locate hidden cabling in walls, ceilings or
distribution boxes. Four unique selectable
tones help identify different users toning
at the same time.
Identify cabling links from the
wiring closet
MicroScanner Pro Office/Room Identifier
allows you to identify cabling drops for an
office or room during adds, moves and
changes, and it helps determine routing at
the patch panel and documents twisted
pair and coaxial cabling installations. Use
the Office Identifier Plugs (shown below)
Coax Adapter
(MT-8203-15)
Wiremap Adapter
(MT-8203-14)
Office Identifier Plugs
(MT-8203-17)
Bare-wire Adapter
(MT-8203-16)
Figure 4. 10 Base-T signal detected, wired to PC.
Figure 5. Office/Room #4 termination ID.
MicroScanner Pro Accessories
Carrying Case
(MT-8202-04)
Figure 3. Active network hub detected at 90 ft.
Figure 2. Showing 1-2 pair length.
MicroScanner Pro features
• Tests all common copper cable types:
bare wire, coaxial cabling, UTP and STP
cabling
• Checks wire configuration (wiremap) to
ANSI/TIA/EIA 568A, 568B standards
• Speeds identification and troubleshooting
of common miswires such as opens,
shorts, crossed and split pairs
• Uses patented TDR technology to ensure
accurate pair length measurements
• Flashes hub light to help identify pairs
• Generates four unique tones for locating
cables hidden in walls, ceilings, or wiring
closets
• Identifies active networking 10 Base-T/
100Base-T hubs
• Identifies half or full duplex capability
• Matches (UTP or coaxial) cables to offices
during adds, moves and changes
• Enables patch cable testing without
couplers or external adapters
• Comes with one-year warranty
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
MicroMapper™
The fast, comprehensive LAN wiremap checker
The MicroMapper is a small, handheld cable tester that enables network professionals
to verify the integrity of Ethernet twisted-pair cabling in one quick step. The
MicroMapper quickly and easily tests twisted-pair cabling, allowing you to see opens,
shorts, crossed, reversed and split pairs. Simply push the TEST button, and the
MicroMapper will automatically scan all wire pairs for any existing faults in your cable.
The MicroMapper also includes a remote unit to easily enable one-person testing of
installed cabling or patch cords. The MicroMapper includes a built-in tone generator
that allows you to trace cable through walls, floors, and ceilings when used with
IntelliTone Probe, or any other analog probe.
Features
• Verifies UTP/STP network cable to
ANSI/TIA/EIA 568A and 568B
• Tests twisted-pair cables for open
circuits, shorts, crossed pairs,
reversed pairs and split pairs
• Easy-to-read LED fault display
• Tone generator works with IntelliTone
Probe or any other analog probes
• Conducts shield integrity testing
• Features self-storing remote unit to
allow one-person testing of installed
cables
• Includes extended battery life with
automatic sleep mode
• Low-battery LED
• Comes with one-year warranty
Fluke Networks delivers
Network SuperVision
Fluke Networks offers the most compre-
hensive line of premises network testing
tools for the inspection, verification,
certification, and documentation of
copper and fiber optic cabling systems.
Network owners, installers and maintain-
ers alike choose our products because
they provide superior vision into their
networks. From products that stay ahead
of your technology needs, to responsive
service to keep you up and running, Fluke
Networks has everything you need to keep
pace in today’s fast moving networked
world.
Specifications
Ordering Information
Product Specs
MicroScanner Pro Dimensions: 5.5” x 3.25” x 1” (139.7 x 82.5 x 25.4 mm)
Battery: 9-volt alkaline battery; low battery indication
Display: custom LCD, 1.75” x .85” (44.45 x 21.59 mm)
Applications: shielded (STP) and UTP cable; 75 or 50 Ohm Coaxial cable;
10 Base-T or 10/100 Base-T networks
Main tester interface: modular 8 connector for length, 10/100 link
identification, wire map, office identifier, toner; loopback interface:
module 8 connector used for patch cable wiremap
Length measurement: measures length on all 4 pairs and displays in feet
or meters; ±4% or ±2 ft whichever is greater, max length 1500 ft (457 m)
Length calibration: user selectable NVP, NVP calculation based on known
cable length (min. length 50 ft (15 m) and max. length 1500 ft (457 m)
Wiremap and Office/Identifier: faults detected: opens, shorts, reversed
pairs, swapped pairs, and split pairs, distance maximum length: 656 ft
(200M)
Office Identifier: 6 passive test plugs attached to far end (identified as
#1-3 and #5-7); distance maximum length 656 ft (200 mm)
Toner frequency: user may select 1 of 4 predefined tone sequences
Toner Interface: main Mod8 port for tone generation on all 4 pairs.
Ground jack provided for grounding MicroScanner Pro during trace
operations.
High voltage input/protection: the test interface withstands input hazard
conditions that arise from normal telephone interfaces (48 VDC at less
than 80 mA) or 24 VAC power used to power many telephone keysets.
Wiremap Adapter Dimensions: 2.25” x .5” x .625” (57.15 x 12.7 x 15.875 mm)
Coax Adapter Dimensions: 3” x .63” x .58” (76.2 x 16 x 14.7 mm)
MicroMapper Dimensions: 4.93” x 2.05” x 1.18” (125 x 52 x 30 mm)
Weight: 0.28 lbs (130 g)
Minimum length for split pair detection: 2 ft (0.6 m)
Maximum Testing length for twisted pair cables: 656 ft (200 m)
Battery: (4) 1.5-volt AAA alkaline batteries; low battery indication by LED
Model Number Items Included
MT-8200-32A MicroScanner Pro
Includes: MicroScanner Pro, Wiremap Adapter (Office ID 4), Coax Adapter
(CATV type, F-connector), 9-volt Alkaline battery, Quick Reference Guide, and
User CD
MT-8200-24A MicroScanner Pro VDV Kit
Includes: MicroScanner Pro, IntelliTone Probe, wiremap adapter, coax adapter
(CATV type, F-connector), office/room ID kit, 9-volt alkaline battery, Quick
Reference Guide, and User CD
MicroScanner Pro Accessories
MT-8202-04 MicroScanner Pro Carrying Case
MT-8203-15 Coax Adapter Replacement Part (RJ45 to F Connector)
MT-8203-17 Office/Room ID Kit (IDs 1 – 3, 5 – 7)
MT-8203-14 Wiremap Adapter Replacement Part (Office ID 4)
MT-8203-16 Bare Wire Adapter (with alligator clips)
MT-8200-49A MicroMapper
Includes: MicroMapper and MicroMapper Remote, RJ45 patch cable, (4) 1.5
Volt AAA alkaline batteries, Quick Reference Guide, and User CD
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
