A100/A150 Owner's Manual Fujifilm A100 A To Fujis Compact Camera

User Manual: Fujifilm-A100-Manual-a-Manual-to-Fujis-Compact-Camera

Open the PDF directly: View PDF .
Page Count: 96

About This Manual
Camera Q & A
Table of Contents
Before You Begin
- Introduction
First Steps
Basic Photography and Playback
- Taking Pictures in AUTO Mode
- Viewing Pictures
More on Photography
More on Playback
- Playback Options
- Deleting Pictures
Movies
- Recording Movies
- Viewing Movies
Connections
Menus
Technical Notes
- Optional Accessories
- Caring for the Camera
Troubleshooting
- Troubleshooting
- Warning Messages and Displays
Appendix

Before You Begin

First Steps

Basic Photography and Playback

More on Photography

More on Playback

Movies

Connections

Menus

Technical Notes

Troubleshooting

Appendix

BL00833-201 EN

Owner’s Manual

Thank you for your purchase of

this product. This manual de-

scribes how to use your FUJIFILM

A100/A150 digital camera and

the supplied software. Be sure

that you have read and under-

stood its contents before using

the camera.

A100 – 2.7 inch monitor model

A150 – 3.0 inch monitor model

For information on related products, visit our website at

http://www.fujifilm.com/products/index.html

About This Manual

Before using the camera, read this manual and the warnings on another sheet. For information on

speci c topics, consult the sources below.

Memory Cards

Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this

manual, SD memory cards are referred to as “memory cards.” For more information, see page 5.

✔

Warning Messages and Displays

.......................

pg. 80

Find out what’s behind that  ashing icon or error

message in the monitor.

✔

Troubleshooting

..............................................

pg. 75

Having a speci c problem with the camera?

Find the answer here.

✔

Glossary

..........................................................

pg. 84

The meanings of some technical terms may be

found here.

✔

Table of Contents

...............................................

pg. v

The “Table of Contents” gives an overview of the

entire manual. The principal camera operations

are listed here.

✔

Camera Q & A

...................................................

pg. iii

Know what you want to do but don’t know the

name for it? Find the answer in “Camera Q & A.”

iii

Camera Q & A

Find items by task.

Camera Setup

Question

Key phrase

See page

How do I set the camera clock? Date and time 9

Can I set the clock to local time when I travel? Time di erence 70

How do I keep the monitor from turning o automatically? Auto power o 69

How do I make the monitor brighter or darker? LCD brightness 68

How do I stop the camera beeping? Operation volume 65

What are the parts of the camera called? Parts of the camera 2

What do the icons in the monitor mean? Monitor 3

How do I use the menus? Menus 50

What’s behind that  ashing icon or error message in the monitor? Messages and displays 80

How much charge is left in the battery? Battery level 10

Can I increase the capacity of rechargeable Ni-MH batteries? Discharge 72

Sharing Pictures

Question

Key phrase

See page

Can I print pictures on my home printer? Printing pictures 38

Can I copy my pictures to my computer? Viewing pictures on a computer 43

Camera Q & A

Taking Pictures

Question

Key phrase

See page

How many pictures can I take? Memory capacity 85

Is there a quick and easy way to take snapshots? AUTO mode 10

How can I make good portraits? Intelligent Face Detection 15

Is there a simple way to adjust settings for di erent scenes? Shooting mode 25

How do I shoot close-ups? Macro mode (close-ups) 20

How do I keep the  ash from  ring?

Flash mode 21How do I stop my subjects’ eyes glowing red when I use the  ash?

How do I “ ll-in” shadows on back-lit subjects?

How do I take a group portrait that includes the photographer? Self-timer mode 23

How do I frame pictures with the subject o to one side? Focus lock 18

How do I shoot movies? Recording movies 34

Viewing Pictures

Question

Key phrase

See page

How do I view my pictures? Viewing pictures 14

How do I get rid of unwanted pictures? Deleting pictures 14

How do I delete a lot of pictures at once? Erase 32

Can I zoom in on pictures during playback? Playback zoom 29

How do I view a lot of pictures at once? Multi-frame playback 30

How do I view all pictures taken on the same day? Sort by date 31

Can I protect my pictures from accidental deletion? Protect 59

Can I hide the icons in the monitor when viewing my pictures? Choosing a display format 28

How do I view my pictures on TV? Viewing pictures on TV 37

About This Manual .......................................................................... ii

Camera Q & A .................................................................................... iii

Before You Begi

Introduction .......................................................................................1

Symbols and Conventions .......................................................... 1

Supplied Accessories .................................................................... 1

Parts of the Camera ....................................................................... 2

The Monitor ................................................................................... 3

First Step

Inserting the Batteries .................................................................. 4

Inserting a Memory Card ............................................................. 5

Turning the Camera on and O ................................................. 8

Basic Setup .........................................................................................9

Basic Photography and Playbac

Taking Pictures in AUTO Mode ................................................10

Viewing Pictures ............................................................................14

More on Photography

Intelligent Face Detection and Red-Eye Removal

Intelligent Face Detection allows the camera to automatically detect human faces and set focus and

exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for group

portraits to prevent the camera from focusing on the background.

Turn Intelligent Face Detection on.

1.1 Press MENU/OK to display the

shooting menu.

AUTO

OFF

SHOOTING MODE

FACE DETECTION

SHOOTING MENU

QUALITY

ISO

CONTINUOUS

1.2 Press the selector up or down

to highlight c FACE DETEC-

TION.

1.3 Press the selector right to dis-

play Intelligent Face Detection

options.

1.4 Press the selector up or down

to highlight the desired option.

Option

Description

B ON

V ON

Intelligent Face Detection and red-eye

removal on. Use with the  ash.

B ON

V OFF

Intelligent Face Detection on; red-eye

removal o .

OFF Intelligent Face Detection and red-eye

removal o .

1.5 Press MENU/OK to select the

highlighted option and return

to shooting mode.

B icon appears in the monitor

when Intelligent Face Detec-

tion is on.

AUTO

Intelligent Face Detection and Red-Eye Removal

Frame the picture.

If a face is detected, it

will be indicated by a

green border. If there is

more than one face in

the frame, the camera will

select the face closest to

the center; other faces are indicated by white

borders.

Focus.

Press the shutter button halfway

to set focus and exposure for the

subject in the green border.

3 Cautions

• If no face is detected when the shutter button is

pressed halfway (pg. 76), the camera will focus

on the subject at the center of the monitor and

red-eye will not be removed.

• In each shooting mode, the camera will focus

on the human faces, but the exposure will be

optimized for the selected shooting mode, so

the brightness of human faces may not be opti-

mized.

AUTO

Green border

AUTO

Green border

More on Photography

Intelligent Face Detection and Red-Eye Removal

More on Photography

Shoot.

Press the shutter button all the

way down to shoot.

3 Caution

If the subject moves as the shutter button is

pressed, their face may not be in the area indicat-

ed by the green border when the picture is taken.

If B ON/V ON is se-

lected, the picture will

be processed to reduce

red-eye before it is re-

corded (the b RED-EYE

REMOVAL option in the playback menu can

also be used to reduce red-eye; pg. 57).

Intelligent Face Detection

Intelligent Face Detection is

recommended when using the

self-timer for group- or self-por-

traits (pp. 23–24).

During slide shows, the camera can zoom in on pic-

tures taken with Intelligent Face Detection (pg. 58).

REMOVINGREMOVING

Focus Lock

To compose photographs with o -center subjects:

Position the subject in the focus frame.

AUTO

Focus.

Press the shutter button halfway to set fo-

cus and exposure. Focus and exposure will

remain locked while the shutter button is

pressed halfway (AF/AE lock).

F2.8

F2.8250

250

Press

halfway

Repeat steps 1 and 2 as desired to refocus

before taking the picture.

Recompose the picture.

Keeping the shutter button pressed halfway,

recompose the picture.

F2.8

F2.8250

250

Shoot.

Press the shutter-release button the rest of

the way down to take the picture.

Press the rest of

the way down

More on Photography

Focus Lock

More on Photography

Autofocus

Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed

below. If the camera is unable to focus using autofocus, use focus lock (pg. 18) to focus on another subject at

the same distance and then recompose the photograph.

• Very shiny subjects such as mirrors or car bodies.

• Fast-moving subjects.

• Subjects photographed through a window or other re ective object.

• Dark subjects and subjects that absorb rather than re ect light, such as hair or fur.

• Insubstantial subjects, such as smoke or  ame.

• Subjects that show little contrast with the background (for example, subjects in clothing that is the same color

as the background).

• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a

subject photographed against a backdrop of highly contrasting elements).

C Macro Mode (Close-ups)

Macro mode can be used for close-ups in some modes (see another sheet). Press the selector left (

AUTO

C icon appears in monitor when

camera is in macro mode

When macro mode is in e ect, the camera focuses on subjects near the center of the monitor. Use the

zoom buttons to frame pictures.

To exit macro mode, press the selector left (C). Macro mode can also be cancelled by turning the

camera o or selecting another shooting mode.

1 Note

Use of a tripod is recommended to prevent blur caused by camera shake.

More on Photography

T Using the Flash

Use the  ash when lighting is poor, for example when shooting at night or indoors under low light.

To choose a  ash mode, press the selector right (T). The  ash mode changes each

time the selector is pressed; in modes other than AUTO, the current mode is indi-

cated by an icon in the monitor. Choose from the following options (some options

are not available in all shooting modes; see another sheet):

Mode

Description

AUTO (no icon) The  ash  res when required. Recommended in most situations.

V (red-eye

reduction)

As above, except that red-eye reduction is used to minimize “red-eye” caused by

light from the  ash re ecting from the subject’s retinas as shown in the illustra-

tion at right.

T (forced  ash) The  ash  res whenever a picture is taken. Use for backlit subjects or for natural coloration

when shooting in bright light.

X (suppressed

 a s h )

The  ash does not  re even when the subject is poorly lit. b will appear in the monitor at

slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.

U (slow sync) Capture both the main subject and the background when shooting at night (note that

brightly lit scenes may be overexposed). W combines slow sync with red-eye reduction. If

I is selected for A SHOOTING MODE, shutter speed may be slow. Use a tripod.

W (slow sync with

red-eye reduction)

If the  ash will  re, K will be displayed in the monitor when the shutter button is pressed halfway.

3 Caution

The  ash may  re several times with each shot. Do not move the camera until shooting is complete.

Using the Flash

( Silent Mode

In situations in which camera sounds or light from the

 ash may be unwelcome, press the DISP/BACK button

until ( is displayed in the monitor.

The camera speaker,  ash and self-timer lamps turn

o . Flash and volume settings can not be adjusted

while silent mode is in e ect. To restore normal op-

eration, press the DISP/BACK button until the ( icon

is no longer displayed.

T Using the Flash

Red-Eye Removal

When V REMOVAL ON is selected for

Intelligent Face Detection (pg. 15), red-

eye removal (V) is available in C (V),

forced  ash (U), and slow sync (W)

modes. Red-eye removal minimizes “red-

eye” caused when light from the  ash is re ected

from the subject’s retinas as shown in the illustration

at right.

More on Photography

B Using the Self-Timer

The camera o ers a ten-second timer that allows photographers to appear in their own photographs,

and a two-second timer that can be used to avoid blur caused by the camera moving when the shutter

button is pressed. The self-timer is available in all shooting modes.

Set the timer.

The current self-timer mode is displayed in the monitor. To choose a di erent setting, press the

selector down (B). The selection changes each time the selector is pressed.

AUTO

Choose from Z (self-timer o ),

S (10 s delay), or R (2 s delay)

Focus.

Press the shutter button halfway to focus.

3 Caution

Stand behind the camera when using the shutter button. Standing in front

of the lens can interfere with focus and exposure.

Start the timer.

Press the shutter button the rest of the way down to start the timer.

The display in the monitor shows the number of seconds remaining

until the shutter is released. To stop the timer before the picture is

taken, press DISP/BACK.

The self-timer lamp on the front of the camera will blink immediately

before the picture is taken. If the two-second timer is selected, the

self-timer lamp will blink as the timer counts down.

Intelligent Face Detection

Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 15) is recom-

mended when using the self-timer for group portraits or self-portraits. To use the self-timer with Intelligent Face

Detection, set the timer as described in Step 1 and then press the shutter button all the way down to start the

timer. The camera will detect faces while the timer is counting down and adjust focus and exposure immedi-

ately before the shutter is released. Be careful not to move until the picture has been recorded.

1 Note

The self-timer turns o automatically when the picture is taken, a di erent shooting mode is selected, playback

mode is selected, or the camera is turned o .

B Using the Self-Timer

More on Photography

A Shooting Mode

Choose a shooting mode according to the scene or type of subject.

Selecting a Shooting Mode

1 Press MENU/OK to display the shoot-

ing menu.

AUTO

OFF

SHOOTING MODE

FACE DETECTION

SHOOTING MENU

QUALITY

ISO

CONTINUOUS

2 Press the selector up or down to

highlight A SHOOTING MODE.

3 Press the selector right to display

shooting mode options.

MOVIE

BABY MODE

AUTO

CANCELSET

Automatic mode

setting according to

shooting conditions.

MANUAL

4 Press the selector up or down to

highlight the desired mode.

5 Press MENU/OK to select the high-

lighted option.

A Shooting Mode

Shooting Modes

Shooting Mode

Functions

BMANUAL Choose this mode for complete control of shooting settings, including sensitivity

(pg. 51), exposure compensation (pg. 53), and white balance (pg. 54).

CAUTO Choose for crisp, clear snapshots (pg. 10). This mode is recommended in most situ-

ations.

EBABY MODE Choose for natural skin tones when taking portraits of infants. The  ash turns o

automatically.

AANTI-BLUR

(Picture Stabilization)

Choose this mode for fast shutter speeds that reduce blur caused by camera shake

or subject movement.

FPORTRAIT Choose this mode for softtoned portraits with natural skin tones.

GLANDSCAPE Choose this mode for crisp, clear daylight shots of buildings and landscapes. The

 ash turns o automatically.

HSPORT Choose this mode when photographing moving subjects. Priority is given to faster

shutter speeds.

INIGHT Slow shutter speeds are used to record night and twilight scenes. Use of a tripod is

recommended to prevent camera shake.

DNATURAL LIGHT Capture natural light indoors, under low light, or where the  ash can not be used.

The  ash turns o and sensitivity is raised to reduce blur.

MBEACH Choose for crisp, clear shots that capture the brightness of sunlit beaches.

LSNOW Choose for crisp, clear shots that capture the brightness of scenes dominated by shin-

ing white snow.

JFIREWORKS

Slow shutter speeds are used to capture the expanding burst of light from a  rework.

Press the selector left or right to choose from shutter speeds. Use of a tripod is rec-

ommended to prevent blur. The  ash turns o automatically.

More on Playback

Playback Options

To view the most recent picture in the monitor,

press the D button.

F2.8

12 / 31 / 2050

12 / 31 / 2050 10:00 AM

10:00 AM

250

ISO 100

100-0001

Press the selector right to view

pictures in the order recorded,

left to view pictures in reverse

order.

Press and hold the selector to scroll rapidly

through your pictures.

Choosing a Display Format

Press the DISP/BACK button to cycle through playback

display formats as shown below.

100-0001

F2.8

1000

F2.8

ISO 100

100-0001

2050

1/13

2050

12 / 31

Indicators

displayed

Indicators

hidden

Sort by date

1 Note

Pictures taken using other cameras are indicated by a c (“gift image”) icon during playback.

More on Playback

Playback Options

Playback Zoom

Press T to zoom in on the picture currently dis-

played full frame in the monitor; press W to zoom

out. When the picture is zoomed in, the selector

can be used to view areas of the image not cur-

rently visible in the display.

Navigation

window shows

portion of image

currently displayed

in monitor

Zoom indicator

Press MENU/OK or DISP/BACK to exit zoom.

1 Note

The maximum zoom ratio varies with image size. Play-

back zoom is not available with pictures taken at an

image size of k.

Playback Options

Multi-Frame Playback

To change the number of images

displayed, Press W when a picture is

shown full-frame in the monitor.

Press W to

increase

the number

of pictures

displayed to

two, nine, or a

hundred.

F3.3

1/1000

100-0001

2050

AM12

2050

Press T to reduce

the number

of images

displayed.

Use the selector to highlight images and press

MENU/OK to view the highlighted image full frame.

In the nine- and hundred-frame displays, press

the selector up or down to view more pictures.

More on Playback

Playback Options

Sort by Date

Choose sort-by-date mode to view pictures taken

on a selected date.

1 Press DISP/BACK until the sort-by-date

screen is displayed.

1/13

2050

12 / 31

2 Press the selector up or down to se-

lect a date.

3 Press the selector left or right to se-

lect a picture.

2 Tips: Rapid Scroll

• Press and hold the selector up or down to scroll dates

rapidly.

• Press and hold the selector left or right to rapidly

scroll pictures taken on the same date.

1 Press MENU/OK to display the play-

back menu.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

2 Press the selector up or down to

highlight ERASE.

3 Press the selector right to display de-

lete options.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

FRAME

BACK

ALL FRAMES

4 Press the selector up or down to

highlight FRAME or ALL FRAMES.

5 Press MENU/OK to display options for

the selected item (pg. 33).

2 Tips: Deleting Pictures

• When a memory card is inserted, pictures will be de-

leted from the memory card; otherwise, pictures will

be deleted from internal memory.

• Protected pictures can not be deleted. Remove pro-

tection from any pictures you wish to delete (pg. 59).

• If a message appears stating that the selected images

are part of a DPOF print order, press MENU/OK to delete

the pictures.

I Deleting Pictures

The ERASE option in the playback menu can be used to delete still pictures and movies, increasing

the amount of space available on the memory card or in internal memory (for information on deleting

pictures in single-frame playback, see page 14). Note that deleted pictures can not be recovered. Copy

important pictures to a computer or other storage device before proceeding.

More on Playback

■

FRAME

: Deleting Selected Images

Selecting FRAME displays the

dialog shown at right.

ERASE OK?

CANCELYES

Press the selector left or right

to scroll through pictures and

press MENU/OK to delete the

current picture (the picture is

deleted immediately; be care-

ful not delete the wrong pic-

ture).

Press DISP/BACK to exit when all the desired pic-

tures have been deleted.

■

ALL FRAMES

: Deleting All Images

Selecting ALL FRAMES dis-

plays the con rmation shown

at right.

CANCELYES

ERASE ALL OK?

IT MAY TAKE A WHILE

Press MENU/OK to delete all un-

protected pictures.

The dialog shown at right is

displayed during deletion.

Press DISP/BACK to cancel be-

fore all pictures have been

deleted (any pictures deleted

before the button was pressed

can not be recovered).

CANCEL

I Deleting Pictures

Movies

A Recording Movies

Shoot short movies. Sound is recorded via the built-in microphone; do not cover the microphone

during recording.

1 Press MENU/OK to display the shooting menu

and select A SHOOTING MODE > A MOVIE

(pg. 25).

12s

STANDBY

Time available

is displayed in

monitor

Choosing the Frame Size

To choose the frame size,

press MENU/OK and select

C QUALITY. Choose l

(640 × 480 pixels) for better

quality, m (320 × 240 pix-

els) for longer movies. Press MENU/OK to return to

movie recording mode.

SET-UP

SHOOTING MENU

QUALITY

SHOOTING MODE

53s

29s

2 Frame the scene using the zoom

buttons.

12s

STANDBY

Zoom indicator

Zoom can not be adjusted once recording be-

gins.

Movies

3 Press the shutter button all the way

down to start recording.

12s

REC

YREC and time

remaining are

displayed in monitor

1 Note

Focus is set when recording begins; exposure and

white balance are adjusted automatically throughout

recording. The color and brightness of the image may

vary from that displayed before recording begins.

A Recording Movies

4 Press the shutter button halfway to

end recording. Recording ends au-

tomatically when the movie reaches

maximum length or memory is full.

2 Tip

There is no need to keep the shutter button pressed

during recording.

1 Note

Movies are recorded as monaural motion JPEG  les.

See page 85 for more information on recording times.

D Viewing Movies

During playback (pg. 28),

movies are displayed in the

monitor as shown at right.

The following operations can

be performed while a movie is

displayed:

PLAY

12 / 31 / 2050

10 : 00 AM

100

006

12 / 31 / 2050 10 : 00 AM

100

006

Operation

Description

Start/pause

playback

Press the selector down to start playback.

Press again to pause.

End

playback/

delete

Press the selector up to end playback. If

playback is paused, pressing the selector

up will delete the current movie.

Advance/

rewind

Press the selector right to advance, left to

rewind. If playback is paused, the movie

will advance or rewind one frame each

time the selector is pressed.

Adjust

volume

Press MENU/OK to pause playback and dis-

play volume controls. Press the selector

up or down to adjust the volume; press

MENU/OK again to resume playback.

Progress is shown in the monitor during play-

back.

15s

STOP PAUSE

Progress bar

2 Tip: Viewing Movies on a Computer

Copy movies to the computer before viewing.

3 Cautions

• Do not cover the speaker during playback.

• White vertical or dark horizontal streaks may appear

in movies containing very bright subjects. This is nor-

mal and does not indicate a malfunction.

Connections

Viewing Pictures on TV

Connect the camera to a TV and tune the television to the video channel to show pictures and slide

shows (pg. 58) to a group. The A/V cable (sold separately) connects as shown below.

Connect yellow plug

to video-in jack

Connect white plug

to audio-in jack

Insert into A/V cable

connector

Press D for about a second to turn the camera on. The camera monitor turns o and pictures and

movies are played back on the TV. Note that the camera volume controls have no e ect on sounds

played on the TV; use the television volume controls to adjust the volume.

1 Notes

• A/V cables are sold separately.

• Use fully charged batteries for extended playback.

• Image quality drops during movie playback.

3 Caution

When connecting the A/V cable, be sure the connectors are fully inserted.

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected directly to the printer and

pictures can be printed without  rst being copied to a computer. Note that depending on

the printer, not all the functions described below may be supported.

Connecting the Camera

1 Connect the supplied USB cable as shown and

turn the printer on.

2 Press the D button for about a second to turn

the camera on. I USB will be displayed in

the monitor, followed by the PictBridge display

shown below at right.

USB PICTBRIDGE

TOTAL: 00000

SHEETS

OK SET

FRAME

Printing Selected Pictures

1 Press the selector left or right to dis-

play a picture you wish to print.

2 Press the selector up or down to

choose the number of copies (up to

99).

3 Repeat steps 1–2 to select additional

pictures. Press MENU/OK to display a

con rmation dialog when settings

are complete.

CANCELYES

PRINT THESE FRAMES

TOTAL: 9 SHEETS

4 Press MENU/OK to start printing.

Connections

Printing Pictures via USB

2 Tip: Printing the Date of Recording

To print the date of recording on pictures, press DISP/

BACK in steps 1–2 to display the PictBridge menu (see

“Printing the DPOF Print Order,” below). Press the se-

lector up or down to highlight PRINT WITH DATE r

and press MENU/OK to return to the PictBridge display

(to print pictures without the date of recording, select

PRINT WITHOUT DATE). The date will not be printed

if the camera clock was not set when the picture was

taken.

1 Note

If no pictures are selected when the MENU/OK button is

pressed, the camera will print one copy of the current

picture.

Printing the DPOF Print Order

To print the print order created with N PRINT

ORDER (DPOF) in the playback menu (pg. 41):

1 In the PictBridge display, press DISP/

BACK to open the PictBridge menu.

PRINT DPOF

PRINT WITH DATE

PRINT WITHOUT DATE

PICTBRIDGE

2 Press the selector up or down to

highlight J PRINT DPOF.

3 Press MENU/OK to display a con rma-

tion dialog.

PRINT DPOF OK?

CANCELYES

TOTAL: 9 SHEETS

Printing Pictures via USB

4 Press MENU/OK to start printing.

During Printing

The message shown at right is

displayed during printing. Press

DISP/BACK to cancel before all

pictures are printed (depending

on the printer, printing may end

before the current picture has

printed).

If printing is interrupted, press D to turn the camera

o and then on again.

PRINTING

CANCEL

Disconnecting the Camera

Con rm that “PRINTING” is not displayed in the moni-

tor and press D to turn the camera o . Disconnect

the USB cable.

1 Notes

• Use fully charged batteries to power the camera for

extended periods.

• Print pictures from internal memory or a memory

card that has been formatted in the camera.

• If the printer does not support date printing, the

PRINT WITH DATE r option will not be available in

the PictBridge menu and the date will not be printed

on the pictures in the DPOF print order.

• Default printer page size and print quality settings are

used when printing via direct USB connection.

Connections

Printing Pictures via USB

The

N PRINT ORDER (DPOF) option in the play-

back menu can be used to create a digital “print

order” for PictBridge-compatible printers (pg. 38)

or devices that support DPOF.

DPOF

DPOF (Digital Print Order Format) is standard

that allows pictures to be printed from “print

orders” stored in internal memory or on a

memory card. The information in the order includes

the pictures to be printed and the number of copies

of each picture.

■

WITH DATE

WITH DATE r

/ WITHOUT DATE

To modify the DPOF print order, select N PRINT

ORDER (DPOF) in the playback menu and press

the selector up or down to highlight WITH DATE

r or WITHOUT DATE.

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

PLAYBACK MENU

WITHOUT DATE

RESET ALL

WITH DATE

WITH DATE r: Print date of

recording on pictures.

WITHOUT DATE: Print pictures

without date.

Press MENU/OK and follow the steps below.

1 Press the selector left or right to dis-

play a picture you wish to include in

or remove from the print order.

2 Press the selector up or down to

choose the number of copies (up to

99). To remove a picture from the

order, press the selector down until

the number of copies is 0.

SHEETS

DPOF: 00001

PRINT ORDER (DPOF)

SET

FRAME

Total number of prints

Number of copies

3 Repeat steps 1–2 to complete the

print order. Press MENU/OK to save

the print order when settings are

complete, or DISP/BACK to exit with-

out changing the print order.

Creating a DPOF Print Order

Printing Pictures via USB

4 The total number of prints is dis-

played in the monitor. Press MENU/OK

to exit.

The pictures in the current

print order are indicated by a

J icon during playback.

ISO 100

100

100-

0001

100-0001

F2.8

12 / 31 / 2050

12 / 31 / 2050 10:00 AM

10:00 AM

250

■

RESET ALL

To cancel the current print or-

der, select RESET ALL in the

N PRINT ORDER (DPOF)

menu. The con rmation shown

at right will be displayed; press

MENU/OK to remove all pictures from the order.

1 Notes

• Remove the memory card to create or modify a print

order for the pictures in internal memory.

• Print orders can contain a maximum of 999 pictures.

• If a memory card is inserted con-

taining a print order created by

another camera, the message

shown at right will be displayed.

Pressing MENU/OK cancels the

print order; a new print order must be created as de-

scribed above.

CANCELYES

RESET DPOF OK?

CANCELYES

RESET DPOF OK?

NOYES

RESET DPOF OK?

NOYES

RESET DPOF OK?

Connections

Viewing Pictures on a Computer

The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be

stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.

Do NOT connect the camera to the computer until installation is complete.

Installing FinePixViewer

FinePixViewer is available in a Windows version (FinePixViewer S) and a Macintosh version (FinePixViewer).

The latest version of the FinePixViewer is available at http://www.fujifilm.com.

Installation instructions for Windows are on pages 44–45, those for the Macintosh on pages 46–47.

Viewing Pictures on a Computer

Installing FinePixViewer S: Windows

1 Con rm that the computer meets the following system requirements:

OS Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), Windows XP Professional

(Service Pack 2), or Windows 2000 Professional (Service Pack 4)

CPU

• Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)

• Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)

• Windows 2000: 200 MHz Pentium or better

RAM

• Windows Vista: 512 MB or more (1 GB or more recommended)

• Windows XP: 512 MB or more

• Windows 2000: 128 MB or more

Free disk

space

A minimum of 450 MB required for installation with 600 MB available when FinePixViewer is running (15 GB or

more recommended under Windows Vista, 2 GB or more recommended under Windows XP)

Video

Video 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)

Other

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet con-

nection and e-mail software required to use e-mail option

3 Caution

Other versions of Windows are not supported. Operation is not guaranteed on home-built computers or

computers that have been upgraded from earlier versions of Windows.

2 Start the computer. Log in to an account with administrator privileges before proceeding.

Connections

Viewing Pictures on a Computer

3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive.

Windows Vista

If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;

click Allow.

The installer will start automatically; click Installing FinePixViewer and follow the on-screen instruc-

tions to install FinePixViewer S. Note that the Windows CD may be required during installation.

If the Installer Does Not Start Automatically

If the installer does not start automatically, select Computer or My Computer from the Start menu (Win-

dows Vista/XP) or double-click the My Computer icon on the desktop (Windows 2000), then double-click

the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.

4 If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-

plete installation.

5 When prompted, remove the installer CD from the CD-ROM drive and click Restart to restart the

computer. Store the installer CD in a dry location out of direct sunlight in case you need to re-install

the software. The version number is printed at the top of the CD label for reference when updating

the software or contacting customer support.

Installation is now complete. Proceed to “Connecting the Camera” on page 48.

Viewing Pictures on a Computer

Installing FinePixViewer: Macintosh

1 Con rm that the computer meets the following system requirements:

CPU

CPU PowerPC or Intel

OS Mac OS X version 10.3.9–10.5 (only with OS-preinstalled models)

RAM

RAM 256 MB or more

Free disk space

Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running

Video

Video 800 × 600 pixels or more with thousands of colors or better

Other

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet

connection and e-mail software required to use e-mail option

For the latest compatible OS, see the website below.

http://www.fujifilm.com/products/digital_cameras/index.html

2 After starting the computer and quitting any applications that may be running, insert the installer

CD in a CD-ROM drive. Double-click the FinePix CD icon on the desktop and double-click Installer

for Mac OS X.

3 An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter an

administrator name and password when prompted and click OK, then follow the on-screen instruc-

tions to install FinePixViewer. Click Exit to quit the installer when installation is complete.

Connections

Viewing Pictures on a Computer

4 Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD

if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry

location out of direct sunlight in case you need to re-install the software. The version number is

printed at the top of the CD label for reference when updating the software or contacting customer

support.

5 Select Applications in the Finder Go menu to open the applications folder.

Double-click the Image Capture icon and select Preferences… from the Im-

age Capture application menu.

6 The Image Capture preferences dialog will be displayed. Choose Other… in

the When a camera is connected, open menu, then select FPVBridge in the

“Applications/FinePixViewer” folder and click Open.

7 Select Quit Image Capture from the Image Capture application menu.

Installation is now complete. Proceed to “Connecting the Camera” on page 48.

Viewing Pictures on a Computer

1 If the pictures you wish to copy are stored on a

memory card, insert the card into the camera

(pg. 5). If no card is inserted, pictures will be

copied from internal memory.

3 Caution

Loss of power during transfer could result in loss of

data or damage to internal memory or the memory

card. Use fully charged batteries.

2 Turn the camera o and connect the supplied

USB cable as shown, making sure the connec-

tors are fully inserted. Connect the camera di-

rectly to the computer; do not use a USB hub

or keyboard.

3 Press the D button for about a second to turn

the camera on. FinePixViewer will start auto-

matically and the “Save Image Wizard” will be

displayed. Follow the on-screen instructions

to copy pictures to the computer. To exit with-

out copying pictures, click CANCEL.

3 Caution

If FinePixViewer does not start automatically, the

software may not be correctly installed. Discon-

nect the camera and reinstall the software.

For more information on using FinePixViewer,

select How to Use FinePixViewer in the

FinePixViewer Help menu.

Connecting the Camera

1 Note

The camera will not turn o automatically while connected to a computer.

Connections

Viewing Pictures on a Computer

3 Cautions

• Use only memory cards that have been formatted

in the camera and contain pictures taken with the

camera. If a memory card containing a large num-

ber of images is inserted, there may be a delay before

FinePixViewer starts and FinePixViewer may be un-

able to import or save images. Use a memory card

reader to transfer pictures.

• Make sure the indicator lamp is out before turning the

camera o or disconnecting the USB cable. Failure to

observe this precaution could result in loss of data or

damage to internal memory or the memory card.

• Disconnect the camera before inserting or removing

memory cards.

• In some cases, it may not be possible to access pic-

tures saved to a network server using FinePixViewer

in the same way as on a standalone computer.

• The user bears all applicable fees charged by the

phone company or Internet service provider when

using services that require an Internet connection.

Disconnecting the Camera

After con rming that the indicator lamp is out, follow

the on-screen instructions to turn the camera o and

disconnect the USB cable.

Uninstalling FinePixViewer

Only uninstall FinePixViewer before reinstalling the

software or when it is no longer required. After quit-

ting FinePixViewer and disconnecting the camera,

drag the “FinePixViewer” folder from “Applications”

into the Trash and select Empty Trash in the Finder

menu (Macintosh), or open the control panel and use

“Programs and Features” (Windows Vista) or “Add/Re-

move Programs” (other versions of Windows) to un-

install FinePixViewer. Under Windows, one or more

con rmation dialogs may be displayed; read the con-

tents carefully before clicking OK.

Menus

The Shooting Menu

The shooting menu is used to adjust settings for a wide range of shooting conditions.

Using the Shooting Menu

1 Press MENU/OK to display the shoot-

ing menu.

AUTO

OFF

SHOOTING MODE

FACE DETECTION

SHOOTING MENU

QUALITY

ISO

CONTINUOUS

2 Press the selector up or down to

highlight the desired menu item.

3 Press the selector right to display op-

tions for the highlighted item.

MOVIE

BABY MODE

AUTO

CANCELSET

Automatic mode

setting according to

shooting conditions.

MANUAL

4 Press the selector up or down to

highlight the desired option.

5 Press MENU/OK to select the high-

lighted option.

Menus

The Shooting Menu

Shooting Menu Options

Menu item

Description

Options

Default

A SHOOTING MODE Choose a shooting mode according to the type of

subject (pg. 25).

B/C/E/A/F/G/H/I/D/

M/L/J/K/P/O/N/Q/AC

cFACE DETECTION Turn Intelligent Face Detection and red-eye removal

on or o (pg. 15).

BON SON /BON S OFF /

OFF

BON

SON

BISO Adjust ISO sensitivity (pg. 51). Choose higher values

when the subject is poorly lit. AUTO/ 1600/ 800 / 400 / 200 / 100 AUTO

CQUALITY Choose image size and quality (pg. 52). rF/rN/g3:2/o/n/

m/prN

DEXP. COMPENSATION Adjust exposure for bright, dark, or high-contrast

scenes (pg. 53). –2 EV to +2 EV in increments of 1

/3 EV ±0

EWHITE BALANCE Adjust color for di erent light sources (pg. 54). AUTO/a/b/c/d/e/fAUTO

cCONTINUOUS Shoot a series of pictures (pg. 54). m/OFF OFF

FSET-UP Perform basic camera setup such as choosing a lan-

guage and setting the time and date (pg. 64). Q/R/S/T—

ISO

Control the camera’s sensitivity to light. Higher values can be used to reduce blur when lighting is

poor; note, however, that mottling may appear in pictures taken at high sensitivities. If AUTO is se-

lected, the camera will adjust sensitivity automatically in response to shooting conditions.

In shooting modes other than B, sensitivity is set to AUTO; other values can not be selected.

Settings other than AUTO are shown by an icon in the monitor.

ISO 100

N 17

The Shooting Menu

QUALITY

Choose the size and quality at which still pictures

are recorded (the options for movie mode are

shown on page 34). Large pictures can be printed

at large sizes with no drop in quality; small pic-

tures require less memory, allowing more pictures

to be recorded.

Option

Prints at sizes up to

31 × 23 cm/12 × 9 in. (r) or 31 × 21 cm/12 × 8 in.

(g3:2). Choose rF for high-quality prints,

g3:2 for an aspect ratio of 3 : 2.

g3:2

o22 × 16 cm (8.5 × 6.5 in.)

n17 × 13 cm (7 × 5 in.)

m14 × 10 cm (5.3 × 4 in.)

p5 × 4 cm (2 × 1.5 in.). Suited to e-mail or the

web.

The number of pictures that can be taken at cur-

rent settings (pg. 85) is displayed to the right of

the image quality icon in the monitor.

1 Note

Image quality is not reset when the camera is turned

o or another shooting mode is selected.

Aspect Ratio

Pictures taken at an image quality setting of g 3:2

have an aspect ratio of 3 : 2, the same as a frame of

35-mm  lm. Pictures taken at other settings have an

aspect ratio of 4 : 3.

AUTO AUTO

4 : 3 3 : 2

Menus

The Shooting Menu

EXP. COMPENSATION

Use exposure compensation when photograph-

ing very bright, very dark, or high-contrast sub-

jects.

Choose positive (+) values

to increase exposure

Choose negative (–) values

to reduce exposure

Choosing an Exposure Compensation Value

• Backlit subjects: choose values

from +2

3 EV to +12

3 EV (for an

explanation of the term “EV”,

see the Glossary on page 84)

• Highly re ective subjects or very

bright scenes (e.g., snow elds):

+1 E V

• Scenes that are mostly sky: +1 EV

• Spotlit subjects (particularly if photographed against

dark backgrounds): –2

3 EV

• Subjects with low re ectivity (pine trees or dark-col-

ored foliage): –2

3 EV

1 Note

At settings other than ±0, a d icon is displayed in the monitor. Exposure compensation is not reset when the

camera is turned o ; to restore normal exposure control, choose a value of ±0.

The Shooting Menu

WHITE BALANCE

For natural colors, choose a setting that matches

the light source (for an explanation of “white bal-

ance,” see the Glossary on page 84).

Option

Displayed in

AUTO White balance adjusted automatically.

aFor subjects in direct sunlight.

bFor subjects in the shade.

cUse under “daylight”  uorescent lights.

dUse under “warm white”  uorescent lights.

eUse under “cool white”  uorescent lights.

fUse under incandescent lighting.

If AUTO does not produce the desired results (for

example, when taking close-ups), choose the op-

tion that matches the light source.

1 Notes

• Auto white balance is used with the  ash. Turn the

 a s h o  (pg. 21) to take pictures at other settings.

• Results vary with shooting conditions. Play pictures

back after shooting to check colors in the monitor.

CONTINUOUS (Continuous shooting)

Select m TOP 3 to capture motion in a series of

pictures. The camera takes up to three pictures

while the shutter-release button is pressed.

1 Notes

• The  ash turns o automatically (pg. 21), and focus

and exposure are determined by the  rst frame in

each series. The previously-selected  ash mode is re-

stored when OFF is selected for c CONTINUOUS.

• Frame rate varies with shutter speed.

• The number of pictures that can

be recorded depends on the

memory available. Additional

time may be required to record

pictures when shooting ends.

The pictures are displayed in the

monitor while recording is in progress.

STORINGSTORING

Menus

The Playback Menu

The playback menu is used to manage the pictures in internal memory or on the memory card.

Using the Playback Menu

1 Press D to enter playback mode

(pg. 28).

2 Press MENU/OK to display the play-

back menu.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

3 Press the selector up or down to

highlight the desired menu item.

4 Press the selector right to display op-

tions for the highlighted item.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

FRAME

BACK

ALL FRAMES

The Playback Menu

5 Press the selector up or down to

highlight the desired option.

6 Press MENU/OK to select the high-

lighted option.

Playback Menu Options

The following options are available:

Option

Description

IERASE Delete all or selected pictures (pg. 32).

bRED-EYE

REMOVAL Create copies with reduced red eye (pg. 57).

JSLIDE SHOW View pictures in a slide show (pg. 58).

NPRINT ORDER

(DPOF)

Select pictures for printing on DPOF- and

PictBridge-compatible devices (pg. 41).

LPROTECT Protect pictures from accidental deletion

(pg. 59).

MCOPY Copy pictures between internal memory

and a memory card (pg. 60).

KIMAGE ROTATE Rotate pictures (pg. 62).

OTRIMMING Create cropped copies of pictures (pg. 63).

FSET-UP Perform basic camera setup (pg. 64).

Menus

The Playback Menu

1 Play the picture back in the monitor (pictures

taken with Intelligent Face Detection are in-

dicated by a B icon) and select b RED EYE

REMOVAL in the playback menu (pg. 55).

YES CANCEL

REMOVAL OK?

2 Press MENU/OK. The message shown

below at left will be displayed while

the camera analyses the image; if

red-eye is detected, the message shown be-

low at right will be displayed while the camera

processes the image to create a copy with re-

duced red-eye.

DETECTING

CANCEL

REMOVING

RED EYE REMOVAL

This option is used with pictures taken using Intelligent Face Detection to create copies that have been

processed to remove red eye.

1 Notes

• Red eye may not be removed if the camera is unable to detect a face or the face is in pro le. Results may di er

depending on the scene. Red eye can not be removed from pictures that have already been processed using

red-eye removal or pictures created with other devices.

• The amount of time needed to process the image varies with the number of faces detected.

• Copies created with b RED EYE REMOVAL are indicated by a l icon during playback.

The Playback Menu

SLIDE SHOW

View pictures in an automated

slide show. Choose the type

of show and press MENU/OK to

start. Press the selector left or

right to go back or skip ahead

one frame. Press DISP/BACK at any time during the

show to view on-screen help. When a movie is

displayed, movie playback will begin automati-

cally, and the slide show will continue when the

movie ends. The show can be ended at any time

by pressing MENU/OK.

1 Note

The camera will not turn o automatically while a slide

show is in progress.

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

WIPE

NORMAL

PLAYBACK MENU

SLIDE SHOW

RED EYE REMOVAL

PRINT ORDER (DPOF)

PROTECT

ERASE

WIPE

NORMAL

Option

Description

NORMAL Press selector left or right to go back or

skip ahead one frame. Select WIPE for

wipe transitions between frames.

WIPE

NORMAL B

As above, except that camera automat-

ically zooms in on faces selected with

Intelligent Face detection (pg. 15).

WIPE B

Menus

The Playback Menu

PROTECT

Protect pictures from accidental deletion. The fol-

lowing options are available.

■

FRAME

Protect selected pictures.

1 Press the selector left or right to dis-

play the desired picture.

PROTECT OK?

CANCELYES

UNPROTECT OK?

CANCELYES

Picture not protected Protected picture

2 Press MENU/OK to protect the picture.

If the picture is already protected,

pressing MENU/OK will remove pro-

tection from the image.

3 Repeat steps 1–2 to protect addi-

tional images. Press DISP/BACK to exit

when the operation is complete.

■

SET ALL

Press MENU/OK to protect all

pictures, or press DISP/BACK to

exit without changing picture

status.

SET ALL OK?

IT MAY TAKE A WHILE

CANCELYES

■

RESET ALL

Press MENU/OK to remove pro-

tection from all pictures, or

press DISP/BACK to exit without

changing picture status.

RESET ALL OK?

IT MAY TAKE A WHILE

CANCELYES

If the number of pictures af-

fected is very large, the dis-

play at right will appear in the

monitor while the operation is

in progress. Press DISP/BACK to

exit before the operation is complete.

3 Caution

Protected pictures will be deleted when the memory

card or internal memory is formatted (pg. 69).

CANCELCANCEL

The Playback Menu

COPY

Copy pictures between internal memory and a memory card.

1 Press the selector up or down to

highlight q INTERNAL MEMORY

m p CARD (copy pictures from

internal memory to the memory

card) or p CARD m q INTERNAL MEMORY

(copy pictures from a memory card to internal

memory).

2 Press the selector right to display op-

tions for the highlighted item.

INTERNAL MEMORY

COPY

CARD

INTERNAL MEMORY

CARD

FRAME

ALL FRAMES

CANCELYES

3 Press the selector up or down to

highlight FRAME or ALL FRAMES.

4 Press MENU/OK.

2 Tip: Copying Pictures Between Memory Cards

To copy pictures between two memory cards, insert

the source card and copy the pictures to internal mem-

ory, then remove the source card, insert the destination

card, and copy the pictures from internal memory.

Menus

The Playback Menu

■

FRAME

Copy selected frames.

100

0001

COPY OK?

CANCELYES

1 Press the selector left or right to dis-

play the desired picture.

2 Press MENU/OK to copy the picture.

3 Repeat steps 1–2 to copy additional

images. Press DISP/BACK to exit when

the operation is complete.

■

ALL FRAMES

Press MENU/OK to copy all pic-

tures, or press DISP/BACK to exit

without copying pictures.

3 Cautions

• Copying ends when the destination is full.

• DPOF print information is not copied (pg. 41).

100

0001

IT MAY TAKE

A WHILE

COPY ALL OK?

CANCELYES

100

0001

IT MAY TAKE

A WHILE

COPY ALL OK?

CANCELYES

The Playback Menu

IMAGE ROTATE

By default, pictures taken in

tall orientation are displayed

in wide orientation. Use this

option to display pictures in

the correct orientation in the

monitor. It has no e ect on pictures displayed on

a computer or other device.

1 Notes

• Protected pictures can not be rotated. Remove pro-

tection before rotating pictures (pg. 59).

• The camera may not be able to rotate pictures cre-

ated with other devices.

To rotate a picture, play the picture back and se-

lect K IMAGE ROTATE in the playback menu

(pg. 55).

CANCELSET

IMAGE ROTATE

CANCELSET

IMAGE ROTATE

1 Press the selector down to rotate the

picture 90 ° clockwise, up to rotate

the picture 90 ° counterclockwise.

2 Press MENU/OK to con rm the opera-

tion (to exit without rotating the pic-

ture, press DISP/BACK).

The next time the picture is played back, it will

automatically be rotated.

Menus

The Playback Menu

TRIMMING

To create a cropped copy of a picture, play the picture back and select O TRIMMING in the playback

menu (pg. 55).

1 Press the zoom buttons to zoom in and out

and use the selector to scroll the picture un-

til the desired portion is displayed (to exit to

single-frame playback without creating a

cropped copy, press DISP/BACK).

Navigation window

shows portion of

image currently

displayed in monitor

TRIMMING

CANCELYES

Zoom indicator

2 Press MENU/OK. A con rmation dia-

log will be displayed.

CANCELREC

REC OK?

Copy size (o, n, m or p; see page 52)

is shown at the top; if the size is p, OK is dis-

played in yellow. Larger crops produce larger

copies; all copies have an aspect ratio of 4 : 3.

3 Press MENU/OK to save the cropped

copy to a separate  le.

The Setup Menu

Using the Setup Menu

Display the setup menu.

1.1 Press MENU/OK to display the

menu for the current mode.

1.2 Press the selector up or down

to highlight F SET-UP.

1.3 Press the selector right to dis-

play the setup menu.

SET-UP

OFF

DIGITAL ZOOM

IMAGE DISP. CONT.

1.5

FRAME NO.

LCD POWER SAVE

Choose a page.

2.1 Press the selector left or right

to choose a page.

2.2 Press the selector down to en-

ter the menu.

Adjust settings.

3.1 Press the selector up or down

to highlight a menu item.

3.2 Press the selector right to dis-

play options for the highlight-

ed item.

/LANG ENGLISH

2 MIN

NTSC

SET-UP

AUTO POWER OFF

TIME DIFFERENCE

VIDEO SYSTEM

FORMAT 5 MIN

2 MIN

OFF

3.3 Press the selector up or down

to highlight an option.

3.4 Press MENU/OK to select the

highlighted option.

Menus

The Setup Menu

Setup Menu Options

Menu item

Description

Options

Default

a IMAGE DISP. Choose how long pictures are displayed after shooting

(pg. 66).

CONTINUOUS / 3 SEC / 1.5 SEC /

ZOOM (CONTINUOUS) / OFF 1.5 SEC

b FRAME NO. Choose how  les are named (pg. 67). CONTINUOUS / RENEW CONTINUOUS

c DIGITAL ZOOM Enable or disable digital zoom (pg. 68). ON / OFF OFF

d LCD POWER SAVE Enable or disable monitor power saving (pg. 68). ON / OFF ON

e DATE/TIME Set the camera clock (pg. 9). — —

f OPERATION VOL.

Adjust the volume of camera controls.

T (high) / U (mid) /

V (low) / WOFF (mute) U

g SHUTTER VOLUME Adjust the volume of the shutter sound.

h PLAYBACK VOLUME Adjust the volume for movie playback (pg. 68). — 7

i LCD BRIGHTNESS Control the brightness of the monitor (pg. 68). –5 – +5 0

j FORMAT Format internal memory or memory cards (pg. 69). — —

k qChoose a language (pg. 9). See page 87 ENGLISH

l AUTO POWER OFF Choose the auto power o delay (pg. 69). 5 MIN / 2 MIN / OFF 2 MIN

m TIME DIFFERENCE Set the clock to local time (pg. 70). Y/XY

n VIDEO SYSTEM Choose a video mode for connection to a TV (pg. 37). NTSC / PAL —

BATTERY TYPE Specify the type of battery used in the camera (pg. 71). ALKALINE / Ni-MH / LITHIUM ALKALINE

o DISCHARGE Discharge rechargeable Ni-MH batteries (pg. 72). — —

p RESET

Reset all settings except FRAME NO., DATE/TIME, TIME DIFFER-

ENCE, and VIDEO SYSTEM to default values. A con rmation

dialog will be displayed, press the selector left or right to

highlight OK and press MENU/OK.

——

The Setup Menu

IMAGE DISP.

Choose how long pictures are displayed in the monitor after shooting.

• CONTINUOUS: Pictures are displayed until the MENU/OK button is pressed.

• 3 SEC: Pictures are displayed for about 3 s before being recorded to the memory card.

• 1.5 SEC: Pictures are displayed for about 1.5 s before being recorded to the memory card.

• ZOOM (CONTINUOUS): As for CONTINUOUS, except that pictures taken at qualities larger than k can

be zoomed in to check  ne details (see page 29).

• OFF: Pictures are not displayed automatically after shooting.

1 Note

The colors displayed at settings of 3 SEC and 1.5 SEC may di er from those in the  nal picture.

Menus

The Setup Menu

FRAME NO.

New pictures are stored in image  les named using a four-digit  le num-

ber assigned by adding one to the last  le number used. The  le num-

ber is displayed during playback as shown at right. FRAME NO. controls

whether  le numbering is reset to 0001 when a new memory card is in-

serted or the current memory card or internal memory is formatted.

• CONTINUOUS: Numbering continues from the last  le number used or the

 rst available  le number, whichever is higher. Choose this option to

reduce the number of pictures with duplicate  le names.

• RENEW: Numbering is reset to 0001 after formatting or when a new memory card is inserted.

1 Notes

• If the frame number reaches 999-9999, the shutter release will be disabled (pg. 81).

• Selecting p RESET (pg. 65) does not reset frame numbering.

• Frame numbers for pictures taken with other cameras may di er.

100

100-

0001

100-0001

Frame

number

File

number

Directory

number

The Setup Menu

DIGITAL ZOOM

If ON is selected, pressing T at the maximum opti-

cal zoom position will trigger digital zoom, further

magnifying the image. To cancel digital zoom,

zoom out to the minimum digital zoom position

and press W.

AUTO

Zoom indicator

Zoom indicator,

DIGITAL ZOOM on

Optical zoom Digital

zoom

Zoom indicator,

DIGITAL ZOOM o

Optical zoom

3 Caution

Digital zoom produces lower quality images than opti-

cal zoom.

LCD POWER SAVE

If ON is selected, the monitor will dim to save

power if no operations are performed for several

seconds. Full brightness can be restored by press-

ing the shutter button halfway. The monitor does

not dim in movie mode or during playback.

PLAYBACK VOLUME

Press the selector up or down

to choose volume for movie

playback and press MENU/OK to

select.

CANCELSET

VOLUME

LCD BRIGHTNESS

Press the selector up or down

to choose monitor brightness

and press MENU/OK to select.

LCD BRIGHTNESS

CANCELSET

Menus

The Setup Menu

FORMAT

Format internal memory or a

memory card. If a memory

card is inserted in the camera,

p will be displayed in the dia-

log shown at right and this op-

tion will format the memory card. If no memory

card is inserted, q will be displayed and this op-

tion will format internal memory. Press the selec-

tor left to highlight OK and press MENU/OK to be-

gin formatting.

3 Cautions

• All data—including protected pictures—will be de-

leted. Be sure important  les have been copied to a

computer or other storage device.

• Do not open the battery cover during formatting.

AUTO POWER OFF

Choose the length of time before the camera

turns o automatically when no operations are

performed. Shorter times increase battery life; if

OFF is selected, the camera must be turned o

manually. Note that regardless of the option se-

lected, the camera will not turn o automatically

when connected to a printer (pg. 38) or computer

(pg. 48) or when a slide show is in progress (pg.

58).

2 Tip: Reactivating the Camera

To reactivate the camera after it has turned o auto-

matically, press the F button or press the D

button for about a second (pg. 8).

FORMAT

SET

FORMAT OK?

ERASE ALL DATA

OK CANCEL

FORMAT

SET

FORMAT OK?

ERASE ALL DATA

OK CANCEL

The Setup Menu

TIME DIFFERENCE

When travelling, use this option to switch the camera clock instantly from your home time zone to the

local time at your destination.

Specify the di erence between local time

and your home time zone.

1.1 Press the selector up or down

to highlight X LOCAL.

1.2 Press the selector right to dis-

play the time di erence.

12 / 31 / 2050

00 : 00

10 : 00 AM

TIME DIFFERENCE

CANCELSET

1.3 Press the selector left or right

to highlight +, –, hours, or min-

utes; press up or down to edit.

The minimum increment is 15

minutes.

1.4 Press MENU/OK when settings

are complete.

Switch between local time and your home

time zone.

To set the camera clock to local time, high-

light X LOCAL and press MENU/OK. To set

the clock to the time in your home time

zone, select Y HOME. If X LOCAL is se-

lected, X will be displayed in the monitor

for three seconds after the camera enters

shooting mode, and the date will be dis-

played in yellow.

12 / 31 / 2050 10 : 00 AM

AUTO

After changing time zones, check that the

date and time are correct.

Menus

The Setup Menu

BATTERY TYPE

After replacing the batteries with batteries of a di erent type, select the battery type to ensure that the

battery level is displayed correctly and the camera does not turn o unexpectedly.

• ALKALINE: AA alkaline (LR6) battery

• Ni-MH: AA Ni-MH (nickel-metal hydride) battery

• LITHIUM: AA UL-certi ed lithium battery

The Setup Menu

3 Press MENU/OK to begin discharging

the batteries. When the batteries

are fully discharged, the battery level

indicator will blink red and the camera will turn

o . To cancel the process before the batteries

are fully discharged, press DISP/BACK.

DISCHARGE

(Ni-MH Batteries Only)

The capacity of rechargeable

Ni-MH batteries may be tem-

porarily reduced when new,

after long periods of disuse, or

if they are repeatedly recharged

before being fully discharged. Capacity can be

increased by repeatedly discharging the batteries

using the o DISCHARGE option and recharging

them in a battery charger (sold separately). Do

not use o DISCHARGE with non-rechargeable

batteries.

1 Selecting o DISCHARGE displays

the message shown above. Press

MENU/OK.

DISCHARGE

SET

DISCHARGE OK?

IT MAY TAKE A WHILE

FOR DISCHARGING

OK CANCEL

2 Press the selector left or right to

highlight OK.

DISCHARGE

CANCELYES

DO NOT EXECUTE

WITH NON Ni-MH

RECHARGEABLE BATTERIES

DISCHARGE

CANCELYES

DO NOT EXECUTE

WITH NON Ni-MH

RECHARGEABLE BATTERIES

Technical Notes

Optional Accessories

Your camera can be used with televisions, printers, computers, and optional memory cards. For more

information on the accessories available in your region, contact your local Fuji lm representative or visit

http://www.fujifilm.com/products/digital_cameras/index.html.

■

Computer Related

■

Audio/Visual

■

Printing

TV (available from

third-party suppliers)

PictBridge-compatible printer

(available from third-party

suppliers)

Computer (available from

third-party suppliers)

USB

Audio/visual

output

SD card slot or card reader

SD/SDHC

memory card

Printer (available

from third-party

suppliers)

Caring for the Camera

To ensure continued enjoyment of the product, observe the following precautions.

Storage and Use

If the camera will not be used for an extended pe-

riod, remove the batteries and memory card. Do

not store or use the camera in locations that are:

• exposed to rain, steam, or smoke

• very humid or extremely dusty

• exposed to direct sunlight or very high tempera-

tures, such as in a closed vehicle on a sunny day

• extremely cold

• subject to strong vibration

• exposed to strong magnetic  elds, such as near

a broadcasting antenna, power line, radar emit-

ter, motor, transformer, or magnet

• in contact with volatile chemicals such as pesti-

cides

• next to rubber or vinyl products

■

Water and Sand

Exposure to water and sand can also damage the

camera and its internal circuitry and mechanisms.

When using the camera at the beach or seaside,

avoid exposing the camera to water or sand. Do

not place the camera on a wet surface.

■

Condensation

Sudden increases in temperature, such as occur

when entering a heated building on a cold day,

can cause condensation inside the camera. If this

occurs, turn the camera off and wait an hour be-

fore turning it on again. If condensation forms on

the memory card, remove the card and wait for

the condensation to dissipate.

Cleaning

Use a blower to remove dust from the lens and

monitor, then gently wipe with a soft, dry cloth.

Any remaining stains can be removed by wiping

gently with a piece of FUJIFILM lens-cleaning pa-

per to which a small amount of lens-cleaning  uid

has been applied. Care should be taken to avoid

scratching the lens or monitor. The camera body

can be cleaned with a soft, dry cloth. Do not use

alcohol, thinner, or other volatile chemicals.

Travelling

Keep the camera in your carry-on baggage.

Checked baggage may su er violent shocks that

could damage the camera.

Troubleshooting

Power and Battery

Problem

Possible cause

Solution

Page

Power

supply

The camera

does not turn

on.

The batteries are exhausted. Insert fresh or fully-charged spare batteries. 4

The batteries are not in the correct orienta-

tion.

Re-insert the batteries in the correct orienta-

tion. 4

The battery-chamber cover is not latched. Latch the battery-chamber cover. 4

The batteries

run down

quickly.

The batteries are cold.

Warm the batteries by placing them in a pocket

or other warm place and re-insert them in the

camera immediately before taking a picture.

There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth. —

The batteries are new, have been left unused

for an extended period, or have been re-

charged without  rst being fully discharged

(rechargeable Ni-MH batteries only).

Discharge Ni-MH batteries using the

o DISCHARGE option and recharge them

in a battery charger (sold separately). If the

batteries do not hold a charge after repeated

discharging and recharging, they have reached

the end of their service life and must be re-

placed.

The camera

turns o sud-

denly.

The batteries are exhausted. Insert fresh or fully-charged spare batteries. 4

Menus and Displays

Problem

Possible cause

Solution

Page

Menus and displays

are not in English.

English is not selected for the q op-

tion in the setup menu. Select ENGLISH.9

Troubleshooting

Shooting

Problem

Possible cause

Solution

Page

Taking

pictures

No picture is

taken when

the shutter

button is

pressed.

Memory is full. Insert a new memory card or delete pictures. 5, 32

Memory is not formatted. Format the memory card or internal memory. 69

There is dirt on the memory card contacts. Clean the contacts with a soft, dry cloth. 6

The memory card is damaged. Insert a new memory card. 5

The batteries are exhausted. Insert fresh or fully-charged spare batteries. 4

The camera has turned o automatically. Turn the camera on. 8, 69

The monitor

goes dark after

shooting.

The  ash has  red. The monitor may darken while the  ash

charges. Wait for the  ash to charge. 21

Focus The camera

does not focus.

The subject is close to the camera. Select macro mode. 20

The subject is far away from the camera. Cancel macro mode.

The subject is not suited to autofocus. Use focus lock. 18

Close-ups Macro mode is

not available.

The camera is in a shooting mode where

the macro mode cannot be selected. Choose a di erent shooting mode. 25

Intelligent

Face

Detection

Face detection

not available.

The camera is in a shooting mode where

face detection cannot be selected. Choose a di erent shooting mode. 25

No face is

detected.

The subject’s face is obscured by sunglass-

es, a hat, long hair, or other objects. Remove the obstructions.

15The subject’s face occupies only a small

area of the frame.

Change the composition so that the subject’s

face occupies a larger area of the frame.

The subject’s head is tilted or horizontal. Ask the subject to hold their head straight.

The camera is tilted. Hold the camera straight. 11

The subject’s face is poorly lit. Shoot in bright light. —

Wrong subject

selected.

The selected subject is closer to the center

of the frame than the main subject.

Recompose the picture or turn face detection

o and frame the picture using focus lock. 18

Troubleshooting

Problem

Possible cause

Solution

Page

Flash

The  ash does

not  re.

The camera is in a shooting mode where

the  ash cannot  re. Choose a di erent shooting mode. 25

The batteries are exhausted. Insert fresh or fully-charged spare batteries. 4

The  ash is o (X). Choose a di erent  ash mode. 21

Some  ash

modes are not

available.

The camera is in a shooting mode where

the  ash setting you want to use cannot be

selected.

Choose a di erent shooting mode. 25

The  ash does

not fully light

the subject.

The subject is not in range of the  ash. Position the subject in range of the  ash. 87

The  ash window is obstructed. Hold the camera correctly. 11

Problem

images

Pictures are

blurred.

The lens is dirty. Clean the lens. 74

The lens is blocked. Keep objects away from the lens. 11

a is displayed during shooting and the

focus frame is displayed in red. Check focus before shooting. 12, 18,

b is displayed during shooting. Use the  ash or a tripod. 21

Pictures are

mottled.

The ambient temperature is high and the

subject is poorly lit.

This is normal and does not indicate a mal-

function. Choose a lower sensitivity. 51

Playback

Problem

Possible cause

Solution

Page

Pictures

Pictures are

grainy.

The pictures were taken with a di erent

make or model of camera. ——

Playback zoom

unavailable.

The pictures were taken at an image size of

k or with a di erent make or model of

camera.

——

Audio

No sound in

movie play-

back.

Playback volume is too low. Adjust playback volume. 68

The microphone was obstructed. Hold the camera correctly during recording. 34

The speaker is obstructed. Do not cover the speaker during playback. 36

Troubleshooting

Problem

Possible cause

Solution

Page

Deletion

Selected pic-

tures are not

deleted.

Some of the pictures selected for deletion

are protected.

Remove protection using the device with

which it was originally applied. 59

Frame no.

File numbering

is unexpect-

edly reset.

The battery-chamber cover was opened

while the camera was on.

Turn the camera o before opening the bat-

tery-chamber cover to replace the battery or

insert a memory card.

Connections

Problem

Possible cause

Solution

Page

No picture or

sound.

The camera is not properly connected. Connect the camera correctly. 37

The camera was connected during movie

playback.

Connect the camera once movie playback has

ended. 36, 37

Input on the television is set to “TV”. Set input to “VIDEO”. —

The camera is not set to the correct video

standard.

Match the camera n VIDEO SYSTEM setting

to the TV. 37, 65

The volume on the television is too low. Adjust the volume. —

No color. The camera is not set to the correct video

standard.

Match the camera n VIDEO SYSTEM setting

to the TV. 37, 65

Computer

The com-

puter does not

recognize the

camera.

The camera is not properly connected. Connect the camera correctly. 48

PictBridge

Pictures can

not be printed.

The camera is not properly connected. Connect the camera correctly. 38

The printer is o . Turn the printer on. —

Only one copy

is printed. The printer is not PictBridge-compatible. — —

The date is not

printed.

Troubleshooting

Miscellaneous

Problem

Possible cause

Solution

Page

Nothing happens when

the shutter button is

pressed.

Temporary camera malfunction. Remove and reinsert the batteries. 4

The batteries are exhausted. Insert fresh or fully-charged spare batteries. 4

The camera does not

function as expected. Temporary camera malfunction.

Remove and reinsert the batteries. If the prob-

lem persists, contact your FUJIFILM dealer (see

another sheet).

Warning Messages and Displays

The following warnings are displayed in the monitor:

Warning

Description

Solution

O (red) Batteries are low. Insert fresh or fully-charged spare batteries.

N (blinks red) Batteries are exhausted.

bSlow shutter speed. Picture may be blurred. Use the  ash or mount the camera on a tripod.

(displayed in red with

red focus frame)

The camera can not focus.

• Use focus lock to focus on another subject at the

same distance, then recompose the picture (pg. 18).

• If the subject is poorly lit, try focusing at a distance of

about 2 m (6 ft. 7 in.).

• Use macro mode to focus when taking close-ups.

(displayed in red)

The subject is too bright or too dark. The

picture will be over- or under-exposed. If the subject is dark, use the  ash.

FOCUS ERROR

Camera malfunction.

Turn the camera o and then on again, taking care

not to touch the lens. If the message persists, contact

a FUJIFILM dealer.

ZOOM ERROR

NO CARD No memory card inserted when COPY is se-

lected in the playback menu. Insert a memory card.

CARD NOT INITIALIZED

The memory card or internal memory is not

formatted.

Format the memory card or internal memory (pg.

69).

The memory card contacts require clean-

ing.

Clean the contacts with a soft, dry cloth. If the mes-

sage is repeated, format the memory card (pg. 69). If

the message persists, replace the memory card.

Camera malfunction. Contact a FUJIFILM dealer.

PROTECTED CARD The memory card is locked. Unlock the memory card (pg. 5).

BUSY The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 69).

Troubleshooting

Warning Messages and Displays

Warning

Description

Solution

CARD ERROR

The memory card is not formatted for use

in the camera. Format the memory card (pg. 69).

The memory card contacts require cleaning

or the memory card is damaged.

Clean the contacts with a soft, dry cloth. If the mes-

sage is repeated, format the memory card (pg. 69). If

the message persists, replace the memory card.

Camera malfunction. Contact a FUJIFILM dealer.

q MEMORY FULL

The memory card or internal memory is full;

pictures can not be recorded or copied.

Delete pictures or insert a memory card with more

free space.

p MEMORY FULL

INTERNAL MEMORY IS FULL

INSERT A NEW CARD

WRITE ERROR

Memory card error or connection error.

Re-insert the memory card or turn the camera o

and then on again. If the message persists, contact

a FUJIFILM dealer.

Not enough memory remaining to record

additional pictures.

Delete pictures or insert a memory card with more

free space.

The memory card or internal memory is not

formatted.

Format the memory card or internal memory (pg.

69).

READ ERROR

The  le is corrupt or was not created with

the camera. The  le can not be played back.

The memory card contacts require clean-

ing.

Clean the contacts with a soft, dry cloth. If the mes-

sage is repeated, format the memory card (pg. 69). If

the message persists, replace the memory card.

Camera malfunction. Contact a FUJIFILM dealer.

FRAME NO. FULL The camera has run out of frame numbers

(current frame number is 999-9999).

Format the memory card and select RENEW for the

b FRAME NO. option in the F SETUP menu (pg.

64). Take a picture to reset frame numbering to 100-

0001, then return to the b FRAME NO. menu and

select CONTINUOUS.

Warning Messages and Displays

Warning

Description

Solution

TOO MANY FRAMES Date for which more than 4,999 pictures ex-

ist selected in sort-by-date view. Choose a di erent date.

PROTECTED FRAME An attempt was made to delete or rotate a

protected picture.

Remove protection before deleting or rotating pic-

tures.

q NO IMAGE The source device selected in the playback

COPY menu contains no pictures. Select a di erent source.

p NO IMAGE

k CAN NOT TRIM An attempt was made to crop a k pic-

ture. These pictures can not be cropped.

CAN NOT TRIM The picture selected for cropping is dam-

aged or was not created with the camera.

DPOF FILE ERROR The DPOF print order on the current memo-

ry card contains more than 999 images.

Copy the pictures to internal memory and create a

new print order.

CAN NOT SET DPOF The picture can not be printed using DPOF. —

A CAN NOT SET DPOF Movies can not be printed using DPOF. —

CAN NOT ROTATE The picture can not be rotated. —

A CAN NOT ROTATE Movies can not be rotated. —

CANNOT DETECT Red-eye reduction can not be applied to the

selected picture or movie. —CANNOT EXECUTE

A CANNOT EXECUTE

COMMUNICATION ERROR

A connection error occurred while pictures

were being printed or copied to a computer

or other device.

Con rm that the device is turned on and check that

the USB cable is connected.

PRINTER ERROR

Printer out of paper or ink, or other printer

error.

Check printer (see printer manual for details). To re-

sume printing, turn the printer o and then turn it

back on.

PRINTER ERROR

RESUME?

Check printer (see printer manual for details). If print-

ing does not resume automatically, press MENU/OK to

resume.

Troubleshooting

Warning Messages and Displays

Warning

Description

Solution

PRESS AND HOLD

THE DISP BUTTON TO

DEACTIVATE SILENT MODE

An attempt was made to choose a  ash

mode or adjust the volume with the camera

in silent mode.

Exit silent mode before choosing a  ash mode or

adjusting the volume.

CAN NOT BE PRINTED

An attempt was made to print a movie, a

picture not created with the camera, or a

picture in a format not supported by the

printer.

Movies and some pictures created with other devices

can not be printed. If the picture was created with the

camera, check the printer manual to con rm that the

printer supports the JFIF-JPEG or Exif-JPEG format. If it

does not, the pictures can not be printed.

Appendix

Glossary

Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details vis-

ible using optical zoom are simply enlarged, producing a slightly “grainy” image.

Discharge: The capacity of rechargeable Ni-MH batteries will drop if they are repeatedly charged without  rst be-

ing fully discharged. Full capacity can be restored by repeatedly discharging the batteries using the o DIS-

CHARGE option in the camera setup menu and recharging them using a battery charger (sold separately).

DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders” stored

in internal memory or on a memory card. The information in the order includes the pictures to be

printed and the number of copies of each picture.

EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount

of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV

increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering the

camera can be controlled by adjusting aperture and shutter speed.

Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction dur-

ing printing.

JPEG (Joint Photographic Experts Group): A compressed  le format for color images. The higher the compression

rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.

Motion JPEG: An AVI (Audio Video Interleave) format that stores images and sound in a single  le, with the images

recorded in JPEG format. Motion JPEG  les can be played in QuickTime 3.0 or later.

Smear: A phenomenon speci c to CCDs which causes white streaks to appear when very bright light sources, such

as the sun or re ected sunlight, appear in the frame.

White balance: The human brain automatically adapts to changes in the color of light, with the result that objects

that appear white under one light source still appear white when the color of the light source changes. Digital

cameras can mimic this adjustment by processing images according to the color of the light source. This process

is known as “white balance.”

Appendix

Internal Memory/Memory Card Capacity

The following table shows the recording time or number of pictures available at di erent image qualities. All

 gures are approximate;  le size varies with the scene recorded, producing wide variations in the number of  les

that can be stored. The number of frames or length remaining may not diminish at an even rate.

3:2

Image size (pixels)

Image size (pixels) 3648 × 2736

3648 × 2432 2592 × 1944 2048 × 1536 1600 × 1200

640 × 480 640 × 480 320 × 240

File size

File size 4.9 MB 2.5 MB 2.2 MB 1.2 MB 780 KB 630 KB 130 KB — —

Internal memory

(approx. 20 MB)

(approx. 20 MB) 3 7 8 13 19 26 90 13 sec. 31 sec.

SD card

512 MB

512 MB 95 190 210 350 480 640 2220 6 min. 12 min.

1 GB

1 GB 190 380 420 700 960 1280 4420 12 min. 28 min.

2 GB

2 GB 390 760 860 1400 1930 2580 8850 25 min. 57 min.

SDHC card

4 GB

4 GB 790 1520 1720 2810 3870 5160 17720 50 min.*116 mi n.*

6 GB

6 GB 1170 2 25 0 2 5 40 416 0 5 730 76 4 0 2 62 0 0 75 m in .*171 min .*

8 GB

8 GB 1590 3060 3450 5650 7780 10370 35560 100 min.*229 min.*

12 GB

12 GB 2370 4550 5140 8410 11570 15430 52920 151 min.*346 min.*

16 GB

16 GB 3190 6140 6930 11340 15600 20800 71310 204 min.*467 min.*

32 GB

32 GB 6340 12190 13760 22610 30970 41290 99990 406 min.*927 min.*

* Total length of all movie les. Individual movies can not exceed 2 GB in size.

Speci cations

System

Model FUJIFILM DIGITAL CAMERA A100/A150

E ective pixels 10 million

CCD ½.33-in., square-pixel CCD with primary color  lter

Storage media • Internal memory (approx. 20 MB) • SD/SDHC memory cards (see page 5)

File system Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format

(DPOF)

File format • Still pictures: Exif 2.2 JPEG (compressed) • Movies: Motion JPEG AVI

Image size (pixels) • rF: 3,648 × 2,736 • rN: 3,648 × 2,736 • g3:2: 3,648 × 2,432 • o : 2,592 × 1944

• n : 2,048 × 1,536 • m : 1,600 × 1,200 • p : 640 × 480

File size See page 85

Lens 3 × optical zoom lens, F/3.1 (wide angle) – 5.6 (telephoto)

Focal length f=6.3 mm–18.9 mm (35-mm format equivalent: 35.5 mm–106.5 mm)

Digital zoom Approx. 5.7 × (up to 17.1 × when combined with optical zoom)

Aperture (wide angle) Two steps

Focus range (distance

from front of lens)

Approx. 40 cm (1 ft. 4 in.)–in nity (wide angle/telephoto)

Macro mode: approx. 10 cm (4 in.)–80 cm (2 ft. 7 in.) (wide angle); 40 cm (1 ft. 4 in.)–80 cm (2 ft. 7 in.) (telephoto)

Sensitivity Equivalent to ISO 100, 200, 400, 800, 1600; C (Standard Output Sensitivity)

Metering Through-the-lens (TTL) metering

Exposure control Programmed autoexposure

Exposure compensation –2 EV – +2 EV in increments of 1

3 EV (B mode)

Intelligent Face Detection Available

Scene modes E (BABY MODE), F (PORTRAIT), G (LANDSCAPE), H (SPORT), I (NIGHT), D (NATURAL LIGHT),

M (BEACH), L (SNOW), J (FIREWORKS), K (SUNSET), P (FLOWER), O (PARTY), N (MUSEUM),

Q (TEXT)

Picture stabilization Available

Shutter speed 1

4 s–1

2,000 s (AUTO mode); 8 s–1

2,000 s (other modes); combined mechanical and electronic shutter

Continuous shooting Number of recorded frames: up to 3 frames (approx. 1 frame/sec.)

Appendix

Speci cations

System

Focus • Mode: Single AF • Autofocus system: Contrast-detect TTL AF

• Focus-area selection: AF CENTER

White balance Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight  uorescent,

warm white  uorescent, cool white  uorescent, and incandescent lighting

Self-timer Approx. 2 s and approx. 10 s

Flash Auto  ash; e ective range when sensitivity is set to C is approx. 50 cm–3.5 m/1 ft. 8 in.–12 ft. 8 in.

(wide angle), 50 cm–2.0 m/1 ft. 8 in.–6 ft. 8 in. (telephoto), or 30 cm–80 cm/1 ft.–2 ft. 8 in. (macro mode)

Flash modes Auto, red-eye reduction, forced  ash, o , slow sync, slow sync with red-eye reduction

Monitor 2.7/3.0-in., 230k-dot low-temperature polysilicon TFT color LCD monitor; frame coverage approx.

96%

Movies Camera can record movies with monaural sound and a frame size of 640 × 480 (t) or 320 × 240

(s) at a frame rate of 30 fps

Shooting options Intelligent Face Detection and Red-Eye Removal, framing guideline and frame number memory

Playback options Intelligent Face Detection and Red-Eye Removal, Micro Thumbnail, multi-frame playback, sort-by-

date (line view), cropping (still pictures only), slide show, and image rotation

Other options PictBridge, Exif Print, language selection (Simplified Chinese, Traditional Chinese, Czech, Dutch,

English, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish,

Swedish, Thai, and Turkish), time difference, discharge option for rechargeable Ni-MH batteries, Silent

mode

Input/output terminals

A/V OUT (audio/video output) NTSC or PAL with monaural sound

Digital input/output USB 2.0 High Speed with MTP/PTP connection

Speci cations

Power supply/other

Power sources • AA alkaline batteries (×2)

• AA rechargeable nickel-metal hydride (Ni-MH) batteries (×2; sold separately)

• AA lithium batteries (×2)

Battery life Approx. 150 frames (alkaline batteries of the type supplied with the camera), 600 frames (lithium

batteries), or 450 frames (2,700 mAh Ni-MH batteries), based on CIPA (Camera and Imaging Prod-

ucts Association) standard; measured at 23 °C (73 °F) with the monitor on, pictures recorded to an SD

memory card, the camera zoomed from widest angle to maximum zoom and back once every 30 s,

the  ash  red at full power with every other shot, and the camera turned o and then on again every

10 shots. Note that the number of shots that can be taken varies with battery make and charge state,

temperature, and shooting conditions.

Camera dimensions 91.5 mm × 60.5 mm × 21.7 mm/3.6 in. × 2.4 in. × 0.9 in. (W × H × D), excluding battery and accessories

Camera weight Approx. 124 g/4.3 oz. (A100), 130 g/4.5 oz. (A150), excluding battery, accessories, and memory cards

Shooting weight Approx. 172 g/6 oz. (A100), 177 g/6.2 oz. (A150), including battery and memory card

Operating conditions • Temperature: 0 °C – +40 °C/+32 °F – +104 °F • Humidity: 10%–80% (no condensation)

Appendix

Speci cations

Color Television Systems

NTSC (National Television System Committee) is a color television telecasting speci cation adopted mainly in

the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in

European countries and China.

Notices

• Speci cations subject to change without notice. FUJIFILM shall not be held liable for damages resulting from

errors in this manual.

• Although the monitor is manufactured using advanced high-precision technology, small bright points and

anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and

does not indicate a malfunction; images recorded with the camera are una ected.

• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric  elds, static electric-

ity, or line noise).

• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/products/digital_cameras/index.html

IMPORTANT NOTICE: Read Before Using the Software

BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM CORPORATION, PLEASE READ THIS END USER

LICENSE AGREEMENT CAREFULLY. YOU SHOULD USE THE SOFTWARE ON THE CD-ROM ONLY IF YOU CON-

SENT TO THIS AGREEMENT. BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE BOUND BY THIS

AGREEMENT.

End User License Agreement

This End User License Agreement (“Agreement”) is an agreement between FUJIFILM

Corporation (“FUJIFILM”) and you, which sets forth the terms and conditions of the li-

cense granted for you to use the software provided by FUJIFILM.

The CD-ROM contains third-party software. In case a separate agreement is provided

by a third party supplier for its software, the provisions of such separate agreement shall

apply to the use of such third party software, prevailing over those of this Agreement.

1. De nitions.

(a) “Media” means the CD-ROM titled “Software for FinePix” which is provided to you

together with this Agreement.

(b) “Software” means the software which is recorded on Media.

written materials which are provided to you together with Media.

(d) “Product” means Media (including Software) and Documentation collectively.

2. Use of Software.

FUJIFILM grants to you a nontransferable, nonexclusive license:

(a) to install one copy of Software onto one computer in binary machine executable

form;

(b) to use Software on the computer onto which Software is installed; and

3. Restrictions.

3.1 You shall not distribute, rent, lease or otherwise transfer all or any part of Software,

Media or Documentation to any third party without FUJIFILM’s prior written con-

sent. You also shall not sublicense, assign or otherwise transfer all or any part of

the rights granted to you by FUJIFILM under this Agreement without FUJIFILM’s

prior written consent.

3.2 Except as expressly granted by FUJIFILM hereunder, you shall not copy or repro-

duce all or any part of Software or Documentation.

3.3 You shall not modify, adapt or translate Software or Documentation. You also

shall not alter or remove copyright and other proprietary notices that appear on

or in Software or Documentation.

3.4 You shall not, or shall not have any third party, reverse-engineer, decompile, or

disassemble Software.

4. Ownership.

All copyrights and other proprietary rights to Software and Documentation are

owned and retained by FUJIFILM or the third party suppliers as indicated on or in

Software or Documentation. Nothing contained herein shall be construed, expressly

or implicitly, as transferring or granting any right, license, or title to you other than

those explicitly granted under this Agreement.

5. Limited Warranty.

FUJIFILM warrants to you that Media is free from any defect in material and workman-

ship under normal use for ninety (90) days from the date of your receipt of Media.

Should Media not meet the foregoing warranty, FUJIFILM shall replace such defective

Media with other Media bearing no defect. FUJIFILM’s entire liability and your sole

and exclusive remedy with regard to any defect in Media shall be expressly limited to

such FUJIFILM’s replacement of Media as provided herein

6. DISCLAIMER OF WARRANTY.

EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES PRODUCT “AS IS”

AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALL

MAKE NO WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MAT-

TERS, INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY COPYRIGHT,

PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY,

MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE.

7. LIMITATION OF LIABILITY.

IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY GENERAL, SPECIAL, DI-

RECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES (INCLUDING

DAMAGES FOR LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE USE OF OR

INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES.

8. No export.

You acknowledge that neither Software nor any part thereof, will be transferred, or

exported to any country or used in any manner in violation of any export control laws

and regulations to which Software is subject.

9. Termination.

In case you breach any of the terms and conditions hereof, FUJIFILM may immediately

terminate this Agreement without any notice.

. Term .

This Agreement is e ective until the date when you cease to use Software, unless

earlier terminated in accordance with Section 9 hereof.

. Obligation upon termination.

Upon termination or expiration of this Agreement, you shall, at your own responsibil-

ity and expense, delete or destroy immediately all Software (including its copies),

Media and Documentation.

. Gov erni ng Law.

This Agreement shall be governed by and construed in accordance with laws of Japan.

A100/A150 Owner's Manual Fujifilm A100 A To Fujis Compact Camera

Navigation menu

Versions of this User Manual:

Views

Navigation