FinePix JX200 JV100 Fujifilm Fine Pix Manual User Guide And Product Specification

User Manual: Fujifilm-FinePix-JX200-Manual-User-Guide-and-Product-Specification

Open the PDF directly: View PDF .
Page Count: 116

Download
Open PDF In Browser	View PDF

YF07802-121

DIGITAL CAMERA

FINEPIX JX200 Series
FINEPIX JV100 Series
Owner’s Manual
Thank you for your purchase
of this product. This manual
describes how to use your
FUJIFILM FinePix JX200 series,
JV100 series digital camera
and the supplied software. Be
sure that you have read and
understood its contents before
using the camera.
For information on related products, visit our
website at
http://www.fujifilm.com/products/digital_cameras/index html

Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
Troubleshooting
Appendix

Notes and Cautions

IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions: All the safety
and operating instructions should
be read before the appliance is
operated.
• Retain Instructions: The safety and
operating instructions should be
retained for future reference.
• Heed Warnings: All warnings on the
appliance and in the operating
instructions should be adhered to.
• Follow Instructions: All operating
and use instructions should be
followed.
Installation
Power Sources: This video product
should be operated only from the
type of power source indicated on
the marking label. If you are not sure
of the type of power supply to your
home, consult your appliance dealer
or local power company. For video
products intended to operate from
battery power, or other sources,
refer to the operating instructions.

your obsolete outlet. Do not defeat
the safety purpose of the polarized
plug.
Alternate Warnings: This video
product is equipped with a 3-wire
grounding-type plug, a plug having
a third (grounding) pin. This plug
will only fit into a grounding-type
power outlet. This is a safety feature.
If you are unable to insert the
plug into the outlet, contact your
electrician to replace your obsolete
outlet. Do not defeat the safety
purpose of the grounding-type
plug.

manufacturer’s instructions have
been adhered to.
This video product should never
be placed near or over a radiator or
heat register.
Attachments: Do not use
attachments not recommended by
the video product manufacturer as
they may cause hazards.
Water and Moisture: Do not use this
video product near water – for
example, near a bath tub, wash
bowl, kitchen sink, or laundry
tub, in a wet basement, or near a
swimming pool, and the like.

of the appliance should follow the
manufacturer’s instructions, and
should use a mounting accessory
recommended by the manufacturer.
An appliance and
cart combination
should be moved
with care. Quick
stops, excessive
force, and uneven
surfaces may
cause the appliance and cart
combination to overturn.

Antennas
Outdoor Antenna Grounding: If an
Overloading: Do not overload wall
Power-Cord Protection: Power-Supply outside antenna or cable system is
outlets and extension cords as this
connected to the video product, be
cords should be routed so that
can result in a risk of fire or electric
sure the antenna or cable system
they are not likely to be walked
shock.
is grounded so as to provide some
on or pinched by items placed
protection against voltage surges and
upon or against them, paying
Ventilation: Slots and openings
built-up static charges. Section 810
particular attention to cords at
in the cabinet are provided for
plugs, convenience receptacles, and of the National Electrical Code, ANSI/
ventilation and to ensure reliable
NFPA No. 70, provides information
the point where they exit from the
operation of the video product
with respect to proper grounding of
appliance.
and to protect it from overheating,
Grounding or Polarization: This
the mast and supporting structure,
and these openings must not be
Accessories:
Do
not
place
this
video
video product is equipped with a
grounding of the lead-in wire to
blocked or covered.
product
on
an
unstable
cart,
stand,
polarized alternating-current line
an antennadischarge unit, size of
The openings should never be
tripod,
bracket,
or
table.
The
video
plug (a plug having one blade
grounding conductors, location of
blocked by placing the video
product
may
fall,
causing
serious
wider than the other). This plug will product on a bed, sofa, rug, or other
antenna-discharge unit, connection
injury to a child or adult, and
fit into the power outlet only one
to grounding electrodes, and
similar surface.
serious damage to the appliance.
way. This is a safety feature. If you
requirements for the grounding
This video product should not
Use only with a cart, stand, tripod,
are unable to insert the plug fully
electrode.
be placed in a built-in installation
bracket, or table recommended
into the outlet, try reversing the
such as a bookcase or rack unless
plug. If the plug should still fail to fit, proper ventilation is provided or the by the manufacturer, or sold with
the video product. Any mounting
contact your electrician to replace

Notes and Cautions
Power Lines: An outside antenna
system should not be located in the
vicinity of overhead power lines or
other electric light or power circuits,
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or
circuits as contact with them might
be fatal.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Ground
Clamp
Electric
Service
Equipment
Ground
Clamps
Power Service Grounding
Electrode System
(NEC ART 250. PART H)

Never spill liquid of any kind on the
video product.
Lightning: For added protection for
this video product receiver during
a lightning storm, or when it is left
unattended and unused for long
periods of time, unplug it from
the wall outlet and disconnect
the antenna or cable system. This
will prevent damage to the video
product due to lightning and
power-line surges.

Service
Antenna Lead
Servicing: Do not attempt to service
in Wire
this video product yourself as
opening or removing covers may
Antenna
expose you to dangerous voltage or
Discharge Unit other hazards. Refer all servicing to
(NEC SECTION
qualified service personnel.

810-20)
Grounding
Damage Requiring Service: Unplug this
Conductors
video product from the wall outlet
(NEC SECTION
and refer servicing to qualified
810-21)

service personnel under the
following conditions:
When the power-supply cord or
Use
Cleaning: Unplug this video product plug is damaged.
from the wall outlet before cleaning. If liquid has been spilled, or objects
Do not use liquid cleaners or aerosol have fallen into the video product.
If the video product has been
cleaners. Use a damp cloth for
exposed to rain or water.
cleaning.
If the video product has been
Object and Liquid Entry: Never push
dropped or the cabinet has been
objects of any kind into this video
damaged.
product through openings as they
If the video product does not
may touch dangerous voltage
operate normally be following the
points or shortout parts that could
operating instructions. Adjust only
result in a fire or electric shock.

those controls that are covered
by the operating instructions as
an improper adjustment of other
controls may result in damage and
will often require extensive work
by a qualified technician to restore
the video product to its normal
operation.
When the video product exhibits
a distinct change in performance
- this indicates a need for service.
Replacement Parts: When
replacement parts are required, be
sure the service technician has used
replacement parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may
result in fire, electric shock or other
hazards.
Safety Check: Upon completion of
any service or repairs to this video
product, ask the service technician
to perform safety checks to
determine that the video product is
in proper operating condition.

iii

Notes and Cautions

Be sure to read this notes before using

WARNING

Safety Notes

If a problem arises, turn the camera off, remove the battery, disconnect and unplug
the AC power adapter.
Continued use of the camera when it is emitting smoke, is emitting any
unusual odor, or is in any other abnormal state can cause a fire or electric
shock.
• Contact your FUJIFILM dealer.

• Make sure that you use your camera correctly. Read these Safety Notes
and your Owner’s Manual carefully before use.
• After reading these Safety Notes, store them in a safe place.

Unplug
from power
socket

About the Icons
• The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly as a
result.

WARNING

CAUTION

This icon indicates that death or serious injury can result if the information
is ignored.

Do not allow water or foreign objects to enter the camera.
If water or foreign objects get inside the camera, turn the camera off, remove
the battery and disconnect and unplug the AC power adapter.
Continued use of the camera can cause a fire or electric shock.
• Contact your FUJIFILM dealer.

Do not use in
the bathroom
or shower

This icon indicates that personal injury or material damage can result if the
information is ignored.
Do not
disassemble

The icons shown below are used to indicate the nature of the information
which is to be observed.
Triangular icons tell you that this information requires attention (“important”).
Circular icons with a diagonal bar tell you that the action indicated is
prohibited (“Prohibited ).
Filled circles with an exclamation mark tell you an action that must be
performed (“Required”).

Do not use the camera in the bathroom or shower.
This can cause a fire or electric shock.
Never attempt to change or take apart the camera. (Never open the casing.) Do not use
the camera when it has been dropped or the casing is damaged.
This can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy
objects on the connection cord.
These actions could damage the cord and cause a fire or electric shock.
• If the cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface.
This can cause the camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion.
Do not use the camera while you are walking or driving a vehicle. This can
result in you falling down or being involved in a traffic accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from the lightning
discharge.
Do not use the battery except as specified.
Load the battery as aligned with the indicator.

Notes and Cautions
WARNING

CAUTION

Do not heat, change or take apart the battery. Do not drop or subject the battery to
impacts. Do not store the battery with metallic products. Do not use chargers other
than the specified model to charge the battery.
Any of these actions can cause the battery to burst or leak and cause fire or
injury as a result.

Keep out of the reach of small children.
This product could cause injury in the hands of a child.

Use only the battery or AC power adapters specified for use with this camera. Do not
use voltages other than the power supply voltage shown.
The use of other power sources can cause a fire.

Do not move the camera while the AC power adapter is still connected. Do not pull on
the connection cord to disconnect the AC power adapter.
This can damage the power cord or cables and cause a fire or electric shock.

If the battery leaks and fluid gets in contact with your eyes, skin or clothing. Flush
the affected area with clean water and seek medical attention or call an emergency
number right away.

Do not use the AC power adapter when the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.

Do not use the charger to charge batteries other than those specified here.
The Ni-MH battery charger is designed for Fujifilm HR-AA Ni-MH batteries.
Using the charger to charge conventional batteries or other types of
rechargeable batteries can cause the battery to leak fluid, overheat or burst.

Do not cover or wrap the camera or the AC power adapter in a cloth or blanket.
This can cause heat to build up and distort the casing or cause a fire.

When carrying the battery, install it in a digital camera or keep it in the hard case.
When storing the battery, keep it in the hard case. When discarding, cover the battery
terminals with insulation tape.
Contact with other metallic objects or battery could cause the battery to
ignite or burst.
Keep Memory Cards out of the reach of small children.
Because Memory Cards are small, they can be swallowed by children. Be sure
to store Memory Cards out of the reach of small children. If a child swallows a
Memory Card, seek medical attention or call an emergency number.

CAUTION
Do not use this camera in locations affected by oil fumes, steam, humidity or dust.
This can cause a fire or electric shock.

Do not place heavy objects on the camera.
This can cause the heavy object to tip over or fall and cause injury.

When you are cleaning the camera or you do not plan to use the camera for an extended
period, remove the battery and disconnect and unplug the AC power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause a fire.
Using a flash too close to a person’s eyes may temporarily affect the eyesight.
Take particular care when photographing infants and young children.
When an xD-Picture Card is removed, the card could come out of the slot too quickly.
Use your finger to hold it and gently release the card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric shock.
• Contact your FUJIFILM dealer to request internal cleaning every 2 years.
• Please note this is not a free of charge service.

Do not leave this camera in places subject to extremely high temperatures.
Do not leave the camera in locations such as a sealed vehicle or in direct
sunlight. This can cause a fire.

Notes and Cautions
Power Supply and Battery
* Confirm your battery type before reading
the following descriptions.

The following explains proper use
of batteries and how to prolong
their life. Incorrect use of batteries
can cause shorter battery life, as
well as leakage, excessive heat, fire
or explosion.

take care not to place the battery
directly against the pad. The
camera may not operate if you
use a depleted battery in cold
conditions.

■ Charging the Battery
• You can charge the battery using
the battery charger (included).
• The battery can be charged at
ambient temperatures between
1 Camera uses the Rechargeable
0°C and +40°C (+32°F and
Lithium-ion Battery
+104°F). Refer to the OWNER’S
* When shipped, the battery is not
MANUAL for the time of
fully charged. Always charge the
charging battery.
battery before using it.
• You should charge the battery
* When carrying the battery, install
at an ambient temperature
it in a digital camera or keep it in
between +10°C and +35°C
the soft case.
(+50°F and +95°F). If you charge
■ Battery Features
the battery at a temperature
• The battery gradually loses its
outside this range, charging
charge even when not used. Use
takes longer because the
a battery that has been charged
performance of the battery is
recently (in the last day or two) to
impaired.
take pictures.
• You cannot charge the battery
• To maximize the life of the battery,
at temperatures of 0°C (+32°F) or
turn the camera off as quickly as
below.
possible when it is not being used. • The Rechargeable Lithium-ion
• The number of available frames
Battery does not need to be fully
will be lower in cold locations or
discharged or exhausted flat
at low temperatures. Take along
before being charged.
a spare fully charged battery. You
• The battery may feel warm after it
can also increase the amount of
has been charged or immediately
power produced by putting the
after being used. This is perfectly
battery in your pocket or another
normal.
warm place to heat it and then
• Do not recharge a fully charged
loading it into the camera just
battery.
before you take a picture.
If you are using a heating pad,

■ Battery Life
At normal temperatures, the battery
can be used at least 300 times.
If the time for which the battery
provides power shortens markedly,
this indicates that the battery has
reached the end of its effective life
and should be replaced.
■ Notes on storage
• If a battery is stored for long
periods while charged, the
performance of the battery can
be impaired. If the battery will not
be used for some time, run the
battery out before storing it.
• If you do not intend to use the
camera for a long period of time,
remove the battery from the
camera.
• Store the battery in a cool place.
• The battery should be stored in
a dry location with an ambient
temperature between +15°C and
+25°C (+59°F and +77°F).
• Do not leave the battery in hot
or extremely cold places.

• Dispose of used battery promptly.
• Do not drop the battery or
otherwise subject it to strong
impacts.
• Do not expose the battery to
water.
• Always keep the battery terminals
clean.
• Do not store batteries in hot
places. Also, if you use the battery
for a long period, the camera body
and the battery itself will become
warm. This is normal. Use the AC
power adapter if you are taking
pictures or viewing images for a
long period of time.
2 Camera uses AA-size alkaline
or Ni-MH (nickelmetal hydride)
rechargeable batteries
* For details on the batteries that
you can use, refer to the OWNER’S
MANUAL of your camera.

■ Cautions for Using Battey
• Do not heat the batteries or throw
them into a fire.
• Do not carry or store batteries
■ Handling the Battery
with metal objects such as
Cautions for Your Safety:
necklaces or hairpins.
• Do not carry or store battery with • Do not expose the batteries to
metal objects such as necklaces or
water, and keep batteries from
hairpins.
getting wet or stored in moist
• Do not heat the battery or throw it
locations.
into a fire.
• Do not attempt to take apart or
• Do not attempt to take apart or
change the batteries, including
change the battery.
battery casings.
• Do not recharge the battery with
• Do not subject the batteries to
chargers other those specified.
strong impacts.

Notes and Cautions
• Do not use batteries that are
If any liquid at all leaks from
leaking, deformed, discolored.
the batteries, wipe the battery
• Do not store batteries in warm or
compartment thoroughly and
humid places.
then load new batteries.
• Keep the batteries out of reach of
If any battery fluid comes
babies and small children.
into contact with your hands
• Make sure that the battery polarity
or clothing, flush the area
(E and F) is correct.
thoroughly with water. Note
• Do not use new with used
that battery fluid can cause
batteries. Do not use charged and
loss of eyesight if it gets into
discharged batteries together.
your eyes. If this occurs, do
• Do not use different types or
not rub your eyes. Flush the
brands of batteries at the same
fluid out with clean water and
time.
contact your physician for
• If you do not intend to use the
treatment.
camera for a long period of time,
remove the batteries from the
■ Using the AA-size Ni-MH batteries
camera. Note if the camera is left
correctly
with the batteries removed, the
• Ni-MH batteries left unused in
time and date settings are cleared.
storage for long periods can
• The batteries feel warm right after
become “deactivated”. Also,
being used. Before removing the
repeatedly charging Ni-MH
batteries, turn the camera off
batteries that are only partially
and wait for the batteries to cool
discharged can cause them
down.
to suffer from the “memory
• Since batteries do not work well in
effect”. Ni-MH batteries that
cold weather or locations, warm
are “deactivated” or affected by
the batteries by placing them
“memory” suffer from the problem
inside your garments before use.
of only providing power for a
Batteries do not work well when
short time after being charged. To
cold. They will work again when
prevent this problem, discharge
the temperature returns to normal.
and recharge them several times
• Soil (such as fingerprints) on
using the camera’s “Discharging
the battery terminals makes the
rechargeable batteries” function.
batteries charge less reducing the
Deactivation and memory are
number of images. Carefully wipe
specific to Ni-MH batteries and are
the battery terminals with a soft
not in fact battery faults.
dry cloth before loading.
See OWNER’S MANUAL for the

procedure for “Discharging
rechargeable batteries”.

CAUTION
Do not use the “Discharging
rechargeable batteries” function
when alkaline batteries being used.
• To charge Ni-MH batteries,
use the quick battery charger
(sold separately). Refer to the
instructions supplied with the
charger to make sure that the
charger is used correctly.
• Do not use the battery charger to
charge other batteries.
• Note that the batteries feel warm
after being charged.
• Due to the way the camera is
constructed, a small amount of
current is used even when the
camera is turned off. Note in
particular that leaving Ni-MH
batteries in the camera for a long
period will overdischarge the
batteries and may render them
unusable even after recharging.
• Ni-MH batteries will self-discharge
even when not used, and the time
for which they can be used may
be shortened as a result.
• Ni-MH batteries will deteriorate
rapidly if overdischarged (e.g.
by discharging the batteries in a
flashlight). Use the “Discharging
rechargeable batteries” function
provided in the camera to
discharge the batteries.
• Ni-MH batteries have a limited
service life. If a battery can only be

used for a short time even after
repeated discharge-charge cycles,
it may have reached the end of its
service life.
■ Disposing of Batteries
• When disposing of batteries, do
so in accordance with your local
waste disposal regulations.
3 Notes on both models ( 1 , 2 )
■ AC Power Adapter
Always use the AC Power Adapter
with the camera. The use of an AC
Power adapter other than FUJIFILM
AC Power Adapter can be damaged
to your digital camera.
For details on the AC power adapter,
refer to the OWNER’S MANUAL of
your camera.
• Use the AC power adapter for
indoor use only.
• Plug the connection cord plug
securely into the DC input
terminal.
• Turn off the FUJIFILM Digital
camera before disconnecting the
cord from the DC input terminal.
To disconnect, pull out the plug
gently. Do not pull on the cord.
• Do not use the AC power adapter
with any device other than your
camera.
• During use, the AC power adapter
will become hot to the touch. This
is normal.

vii

Notes and Cautions
• Do not take apart the AC power
adapter. Doing so could be
dangerous.
• Do not use the AC power adapter
in a hot and humid place.
• Do not subject the AC power
adapter to strong shocks.
• The AC power adapter may emit a
humming. This is normal.
• If used near a radio, the AC power
adapter may cause static. If this
happens, move the camera away
from the radio.

purely for personal use. Users are
also asked to note that the transfer
of Memory Card containing images
or data protected under copyright
laws is only permissible within
the restrictions imposed by those
copyright laws.

• IBM PC/AT is a registered
trademark of International
Business Machines Corp. of the
U.S.A.
• Macintosh, Quick-Time, and Mac
OS are trademarks of Apple Inc. in
the U.S.A. and other countries.
• Windows 7, Windows Vista and the
■ Handling Your Digital Camera
Windows logo are trademarks of
To ensure that images are recorded
the Microsoft group of companies.
correctly, do not subject the camera
• IrSimple™ Trademark is owned by
to impact or shock while an image is
the Infrared Data Association®.
being recorded.
• IrSS™ Trademark or IrSimpleShot™
■ Liquid Crystal
Trademark is owned by the
Before Using the Camera
If the LCD monitor is damaged,
Infrared Data Association®.
take
particular
care
with
the
liquid
•
SDHC logo is a trademark.
■ Test Shots Prior to Photography
crystal
in
the
monitor.
If
any
of
the
•
HDMI logo is a trademark.
For important photographs (such
following situations arise, take the
• YouTube is a trademark of Google
as weddings and overseas trips),
Inc.
always take a test shot and view the urgent action indicated.
• Other company or product names
image to make sure that the camera • If liquid crystal comes in contact
with your skin:
are trademarks or registered
is working normally.
Wipe the area with a cloth and
trademarks of the respective
• FUJIFILM Corporation cannot
then wash thoroughly with soap
companies.
accept liability for any incidental
and running water.
losses (such as the costs of
■ Notes on Electrical Interference
photography or the loss of income • If liquid crystal gets into your eye: If the camera is to be used in
Flush the affected eye with clean
from photography) incurred as a
hospitals or aircrafts, please
water for at least 15 minutes and
result of faults with this product.
note that this camera may cause
then seek medical assistance.
interference to other equipment in
■ Notes on Copyright
• If liquid crystal is swallowed:
the hospital or aircraft. For details,
Images recorded using your digital
Flush your mouth thoroughly with
please check with the applicable
camera system cannot be used in
water. Drink large quantities of
regulations.
ways that infringe copyright laws
water and induce vomiting. Then
without the consent of the owner,
seek medical assistance.
unless intended only for personal
■ Trademark Information
use. Note that some restrictions
•
and xD-Picture Card™
apply to the photographing of
are trademarks of FUJIFILM
stage performances, entertainments
Corporation.
and exhibits, even when intended

viii

■ Explanation of Color Television
System
NTSC: National Television System
Committee, color television
telecasting specifications
adopted mainly in the U.S.A.,
Canada and Japan.
PAL: Phase Alternation by Line,
a color television system
adopted mainly by European
countries and China.
■ Exif Print (Exif ver. 2.2)
Exif Print Format is a newly revised
digital camera file format that
contains a variety of shooting
information for optimal printing.

About This Manual
Before using the camera, read this Owner’s Manual and the other supplied documents. For
information on specific topics, consult the sources below.
✔ Camera Q & A .....................................................pg.
..................................................... pg. x
Know what you want to do but don’t know the
name for it? Find the answer in “Camera Q & A.”

✔ Table of Contents ............................................
............................................pg.
pg. xiii
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.

✔ Troubleshooting ...
..............................................pg.
... ... ... ... ... ... ... ... ... ... ..pg. 82
Having a specific problem with the camera?
Find the answer here.

✔ Warning Messages and Displays .......................
.......................pg.
pg. 89
Find out what’s behind that flashing icon or
error message in the monitor.

✔ Glossary ..........................................................pg.
..........................................................pg. 93
The meanings of some technical terms may be
found here.

✔ Restrictions on Camera Settings
See another supplied document for restrictions
on the options available in each shooting mode.

Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this
manual, SD memory cards are referred to as “memory cards.” For more information, see page 8.

Camera Q & A
Find items by task.
Camera Setup
Question
How do I set the camera clock?
Can I set the clock to local time when I travel?
How do I keep the display from turning off automatically?
How do I make the display brighter or darker?
How do I stop the camera beeping and clicking?
What are the parts of the camera called?
What do the icons in the display mean?
How do I use the menus?
What’s behind that flashing icon or error message?
How much charge is left in the battery?

Key phrase
See page
Date and time
12
Time difference
74
Auto power off
77
LCD brightness
77
Operation and shutter volume
72
Silent mode
33
Parts of the camera
2
Displays
3
Menus
58
Messages and displays
89
Battery level
13

Sharing Pictures
Question
Can I print pictures on my home printer?
Can I copy my pictures to my computer?

Key phrase
See page
Printing pictures
47
Viewing pictures on a computer
52

Camera Q & A

Taking Pictures
Question
Key phrase
See page
How many pictures can I take?
Memory capacity
94
Is there a quick and easy way to take snapshots?
20
k mode
How can I make good portraits?
Intelligent Face Detection
24
Can I choose my own settings for different scenes?
Scene position
20
Can the camera automatically adjust settings for different scenes?
13
SRC (SCENE RECOGNITION)
How can I be sure my subject is smiling when I take a photograph?
Smile detection
21
How can I be sure that nobody blinked when the photo was taken?
Blink detection
26
How do I shoot a panorama?
21
W mode
How do I shoot close-ups?
Close-ups (macro mode)
31
How do I keep the flash from firing?
How do I stop my subjects’ eyes glowing red when I use the flash?
Flash mode
32
How do I “fill-in” shadows on back-lit subjects?
How do I take a series of pictures in a single burst?
Continuous shooting mode
62
How do I take a group portrait that includes the photographer?
Self-timer mode
34
How do I frame pictures with the subject off to one side?
Focus lock
27
How do I adjust exposure?
Exposure compensation
29
How do I keep a moving subject in focus?
Tracking
62
How do I shoot movies?
Recording movies
43

Camera Q & A

Viewing Pictures
Question
How do I view my pictures?
How do I delete the current picture?
Can I select other pictures for deletion?
Can I zoom in on pictures during playback?
How do I view a lot of pictures at once?
How do I find pictures?
Can I protect my pictures from accidental deletion?
Can I hide the icons in the display when viewing my pictures?
Can I view my pictures in a slide show?
Can I crop unwanted elements out of my pictures?
Can I make small copies of pictures?
Can I copy pictures from internal memory to a memory card?
How do I view my pictures on TV?

xii

Key phrase
Single-frame playback
The I button
Deleting pictures
Playback zoom
Multi-frame playback
Image search
Protect
Choosing a display format
Slide show
Crop
Resize
Copy
Viewing pictures on TV

See page
36
18
41
37
38
39
65
36
64
66
67
69
46

Table of Contents
Notes and Cautions ........................................................................ ii
IMPORTANT SAFETY INSTRUCTIONS ...................................... ii
Safety Notes .................................................................................... iv
About This Manual ......................................................................... ix
Camera Q & A ..................................................................................... x

Before You Begi
Begin
n
Introduction....................................................................................... 1
Symbols and Conventions .......................................................... 1
Supplied Accessories .................................................................... 1
Parts of the Camera ....................................................................... 2
Camera Displays .......................................................................... 3
The Mode Dial .............................................................................. 4

First Steps
Steps
Charging the Battery ..................................................................... 5
Inserting the Battery...................................................................... 6
Inserting a Memory Card ............................................................. 8
Turning the Camera on and off ............................................... 11
Shooting Mode ............................................................................. 11
Playback Mode .............................................................................. 11
Basic Setup .......................................................................................12

Basic Photography and Playbac
Playback
k
Taking Pictures in SRC (SCENE RECOGNITION)
Mode ...................................................................................................13
Viewing Pictures ............................................................................18

More on Photography
Photography
Shooting Mode ...............................................................................19
SRC SCENE RECOGNITION...............................................19
k AUTO ..........................................................................................19
P PROGRAM AE .............................................................................19
A NATURAL & K .......................................................................19
B NATURAL LIGHT ...................................................................20
D/E SCENE POSITION ...........................................................20
B Intelligent Face Detection ..................................................24
BLINK DETECTION ........................................................................26
Focus Lock ........................................................................................27
5 Exposure Compensation.....................................................29
L Macro Mode (Close-ups) ......................................................31
K Using the Flash (Intelligent Flash).....................................32
J Using the Self-Timer...............................................................34

More on Playback
Playback
Playback Options...........................................................................36
Playback Zoom..............................................................................37
Multi-Frame Playback.................................................................38
V Image Search ............................................................................39
Image Search based on categories .......................................39
Using Playback Menu with Image Search...........................40
M Deleting Pictures ....................................................................41

Moviess
Movie
A Recording Movies ...................................................................43
D Viewing Movies .......................................................................45

xiii

Table of Contents
Connectionss
Connection
Viewing Pictures on TV ...............................................................46
Printing Pictures via USB ...........................................................47
Connecting the Camera ............................................................47
Printing Selected Pictures ........................................................47
Printing the DPOF Print Order ................................................49
Creating a DPOF Print Order ....................................................50
Viewing Pictures on a Computer............................................52
Installing the Software...............................................................52
Connecting the Camera ............................................................56

Menuss
Menu
Using the Menus: Shooting Mode .........................................58
Using the Shooting Menu.........................................................58
Shooting Menu Options ............................................................59
n ISO ............................................................................................60
o IMAGE SIZE ...........................................................................60
T IMAGE QUALITY ..................................................................61
C WHITE BALANCE .................................................................61
E CONTINUOUS ......................................................................62
F AF MODE ...............................................................................62
Using the Menus: Playback Mode ..........................................63
Using the Playback Menu .........................................................63
Playback Menu Options.............................................................64
q SLIDE SHOW .........................................................................64
a RED EYE REMOVAL.............................................................65
O PROTECT ................................................................................65
R CROP .......................................................................................66
j RESIZE .....................................................................................67
N IMAGE ROTATE ....................................................................68
P COPY .......................................................................................69

xiv

The Setup Menu .............................................................................71
Using the Setup Menu ...............................................................71
Setup Menu Options...................................................................72
p TIME DIFFERENCE...............................................................74
m FORMAT .................................................................................75
a IMAGE DISP. ..........................................................................75
b FRAME NO. ...........................................................................76
g PLAYBACK VOLUME...........................................................76
g LCD BRIGHTNESS................................................................77
a LCD MODE .............................................................................77
o AUTO POWER OFF ..............................................................77
c DIGITAL ZOOM ....................................................................78

Technical Note
Notess
Optional Accessories ...................................................................79
Accessories from FUJIFILM .......................................................80
Caring for the Camera .................................................................81

Troubleshooting
Troubleshootin
g
Troubleshooting ............................................................................82
Warning Messages and Displays ............................................89

Appendix
Appendi
x
Glossary .............................................................................................93
Internal Memory/Memory Card Capacity ..........................94
Specifications ..................................................................................96

Introduction
Symbols and Conventions

Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.

Before You Begin

The following symbols are used in this manual:
C Caution: This information should be read before use to ensure correct operation.
A Note: Points to note when using the camera.
B Tip: Additional information that may be helpful when using the camera.

Supplied
p
Accessories
The following items are included with the camera:

CD-ROM
NP-45A rechargeable
battery

BC-45B battery charger

USB cable

Attaching the Strap
Attach the strap as shown.
Owner’s Manual (may be
distributed on CD in some
countries or regions)
Strap

Introduction

Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button

3 2 1
4

17 16
15

10
11

Move cursor up E
l (exposure compensation)
button (pg. 29)
I (delete) button (pg. 18)

MENU/OK button
(pg. 12)

Move cursor left G
L (macro)
button (pg. 31)

Move cursor right H
K (flash) button
(pg. 32)

18
20
7

1
2
3
4
5
6
7

Move cursor down F
J (self-timer) button (pg. 34)

n button ......................................... 11 8 Flash..................................................................32
Shutter button ...........................................17 9 Monitor ............................................................. 3
Speaker ...........................................................45 10 Tripod mount
Zoom control...................................... 15, 37 11 Connector for USB cable ..............47, 56
Self-timer lamp ..........................................35 12 Battery-chamber cover .......................... 6
13 Strap eyelet .................................................... 1
Lens and lens cover
Microphone .................................................43 14 Mode dial ........................................................ 4

15 Indicator lamp ............................................17
16 D (playback) button ............................36
17 DISP (display)/BACK button ..........16, 36
U (silent mode) button......................33
18 Memory card slot ....................................... 9
19 Battery chamber ......................................... 6
20 Battery latch ............................................. 6, 7

Monitor Brightness
When shooting pictures or movies, monitor brightness will be adjusted automatically according to the
ambient brightness.

Introduction

■ Shooting
*
19
400

F
AF

12 / 31 / 2050 10 : 00 AM
-1 2 3
250
F3.3

* d: indicates that no memory card
is inserted and that pictures will
be stored in the camera’s internal
memory (pg. 8).

1
2
3
4
5
6
7
8
9
10

Internal memory indicator*
Focus frame .................................................27
Silent mode indicator............................33
Continuous shooting mode .............62
Intelligent Face Detection indicator
.............................................................................24
Shooting mode .........................................19
Flash mode...................................................32
Macro (close-up) mode........................31
Self-timer indicator .................................34
Focus warning ...........................................16

11
12
13
14
15
16
17
18
19
20
21

Blur warning ................................................33
Date and time.............................................12
Shutter speed
Aperture
Image size .....................................................60
Number of available frames..............94
Sensitivity ......................................................60
Image quality..............................................61
White balance ............................................61
Battery level .................................................13
Exposure compensation .....................29

Gift image .....................................................36
Silent mode indicator............................33
Red-eye removal indicator ................65
Intelligent Face Detection indicator
..................................................................... 24, 37

5
6
7
8

Playback mode indicator ............18, 36
Protected image .......................................65
DPOF print indicator ..............................50
Frame number ...........................................76

Before You Begin

Camera Displays
The following indicators may appear during shooting and playback: The indicators displayed vary
with camera settings.

■ Playback
100-0001
400

1
2
3
4

12 / 31 / 2050 10 : 00 AM
-1 2 3
1/250 F3.3

Introduction

The Mode Dial
To select a shooting mode, align the mode icon with the mark next
to the mode dial.

P (PROGRAM AE): Select for control of
camera settings such as exposure
compensation, white balance, and ISO
sensitivity. The mode automatically sets
both shutter speed and lens aperture
(pg. 19).

A (MOVIE): Record movies with sound
(pg. 43).

SRC (SCENE RECOGNITION): Select for
letting the camera automatically adjust
settings to suit the scene (pg. 13).

D/E (SCENE POSITION): Choose a
scene suited to the subject or shooting
conditions and let the camera do the rest
(pg. 20).

k (AUTO): A simple “point-and-shoot”
mode recommended for first-time users
of digital cameras (pg. 19).

B (NATURAL LIGHT): Capture natural light
indoors, under low light, or where the
flash can not be used (pg. 20).

A (NATURAL & K): Helps ensure good results
in situations with difficult lighting. Each time
the shutter button is pressed, the camera
takes two shots: one shot without the flash to
preserve natural lighting, followed immediately
by a second shot with the flash (pg. 19).

Charging the Battery
The battery is not charged at shipment. Charge
the battery before use.
Batteries
The camera uses an NP-45A rechargeable battery.

charger as shown, making sure that the
battery is in the orientation indicated by the
E F labels.
B

Battery
F
label

Battery charger

Charging indicator
Arrow

F label

the charger in.
2 Plug
Plug the charger into a power outlet. The
charging indicator will light.
C Cautions
• Unplug the charger when it is not in use.

The Charging Indicator
The charging indicator shows battery charge status
as follows:
Charging indicator Battery status
Action
Battery not
Insert
Off
inserted.
the battery.
On (yellow) Battery charging.
—
Battery fully
Remove
On (green)
charged.
the battery.
Unplug the
charger and
Blinks (yellow)
Battery fault.
remove the
battery.

First Steps

the battery in the charger.
1 Place
Insert the battery into the supplied battery

• Remove dirt from the battery terminals with
a clean, dry cloth. Failure to observe this
precaution could prevent the battery from
charging.
• Charging times increase at low temperatures.

the battery.
3 Charge
Remove the battery when charging is
complete.
Charging time
See specifications of the battery charger (pg. 100).

Inserting the Battery
After charging the battery, insert it in the camera as described below.

1 Open the battery-chamber cover.

A Note
Be sure the camera is off before opening the
battery-chamber cover.
C Cautions
• Do not open the battery-chamber cover
when the camera is on. Failure to observe this
precaution could result in damage to image
files or memory cards.
• Do not use excessive force when handling the
battery-chamber cover.

Insert the battery.
2 Insert
the battery with
the terminals first and the
orange stripe aligned with
the orange battery latch.
Slide the battery into
the camera, keeping the
battery latch pressed to
one side as shown below.
Confirm that the battery is
securely latched.
Orange stripe

Battery latch

Inserting the Battery
C Caution
Insert the battery in the correct orientation. Do
NOT use force or attempt to insert the battery
upside down or backwards. The battery will
slide in easily in the correct orientation.

First Steps

3 Close the battery-chamber cover.

C Cautions
• Do not affix stickers or other objects to the battery.
Failure to observe this precaution could make it
impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery
could overheat.
• Use only battery chargers designated for use with
the battery. Failure to observe this precaution could
result in product malfunction.
• Do not remove the labels from the battery or
attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.

Removing the Battery
After turning the camera off, open the batterychamber cover, press the battery latch to the side,
and slide the battery out of the camera as shown.
Battery latch

C Caution
Turn the camera off before removing the battery.

Inserting a Memory Card
Although the camera can store pictures in internal memory, SD memory cards (sold separately) can
be used to store additional pictures.
When no memory card is inserted, d appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become
corrupted, the pictures in internal memory should periodically be transferred to a computer and
saved on the computer hard disk or on removable media such as CDs or DVDs. The pictures in
internal memory can also be copied to a memory card (see page 69). To prevent internal memory
from becoming full, be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
■ Compatible Memory Cards
SanDisk SD and SDHC memory cards have been tested and approved for use in the camera. Use
a card with a class 4 write speed (4 MB/s) or better when shooting HD movies. A complete list of
approved memory cards is available at http://www.fujifilm.com/products/digital_cameras/index.html.
Operation is not guaranteed with other cards. The camera can not be used with MultiMediaCard
(MMC) or xD-Picture Cards.
C Caution
SD memory cards can be locked, making it impossible to format the card or to record
or delete images. Before inserting an SD memory card, slide the write-protect switch to
the unlocked position.
Write-protect switch

Inserting a Memory Card

■ Inserting a Memory Card
Turn the camera off, and open the
battery-chamber cover.

First Steps

C Caution
Be sure card is in correct orientation; do not
insert at an angle or use force. If the memory
card is not inserted correctly, d will appear
in the monitor and images will be recorded to
internal memory.

the memory card firmly until you
2 Insert
hear (feel) a click.
Holding the memory card in the orientation
shown below, slide it all the way in.

Click

3 Close the battery-chamber cover.

Battery

Inserting a Memory Card
Removing Memory Cards
After confirming that the camera
is off, press the card in and then
release it slowly. The card can
now be removed by hand.
C Cautions
• The memory card may spring out if you remove
your finger immediately after pushing the card in.
• Memory cards may be warm to the touch after
being removed from the camera. This is normal
and does not indicate a malfunction.
C Cautions
• Do not turn the camera off or remove the memory card
while the memory card is being formatted or data are being
recorded to or deleted from the card. Failure to observe
this precaution could damage the card.
• Format SD memory cards before first use, and be
sure to reformat all memory cards after using them
in a computer or other device. For more information
on formatting memory cards, see page 75.
• Memory cards are small and can be swallowed;
keep out of reach of children. If a child swallows a
memory card, seek medical assistance immediately.

• miniSD or microSD adapters that are larger or smaller
than the standard dimensions of an SD card may not
eject normally; if the card does not eject, take the
camera to an authorized service representative. Do
not forcibly remove the card.
• Do not affix labels to memory cards. Peeling labels
can cause camera malfunction.
• Movie recording may be interrupted with some
types of SD memory card.
• The data in internal memory may be erased or
corrupted when the camera is repaired. Please note
that the repairer will be able to view pictures in
internal memory.
• Formatting a memory card or internal memory
in the camera creates a folder in which pictures
are stored. Do not rename or delete this folder or
use a computer or other device to edit, delete, or
rename image files. Always use the camera to delete
pictures from memory cards and internal memory;
before editing or renaming files, copy them to a
computer and edit or rename the copies, not the
originals.

Turning the Camera on and off
Shooting Mode

Playback
y
Mode

Press the n button to turn the camera on.
The lens will extend and the lens cover will open.

To turn the camera on and begin playback, press
the D button for about a second.

B Tip: Switching to Playback Mode
Press the D button for about a second to start
playback. Press the shutter button halfway to return
to shooting mode.

Press the n button to turn the camera off.

First Steps

Press n again to turn the camera off.

B Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the D button to return to playback.

C Cautions
• Forcibly preventing the lens from extending could
cause damage or product malfunction.
• Pictures can be affected by fingerprints and other
marks on the lens. Keep the lens clean.
• The n button does not completely disconnect
the camera from its power supply.
B Tip: Auto Power Off
The camera will turn off automatically if no operations are performed for the length of time selected in the
o AUTO POWER OFF menu (pg. 77). To turn the camera on, use the n button or press the D button
for about a second.

Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 71).

1 Choose a language.
START MENU
ENGLISH

FRANCAIS
DEUTSCH
SET

1.1 Press the selector up or down
to highlight a language.

2 Set the date and time.
DATE / TIME NOT SET
2012
2011

2010
2009
2008

SET

2.2 Press MENU/OK.
A Note
Go to the setup menu if you try to set the language
and date again (pg. 71).

1.2 Press MENU/OK.

YY. MM. DD

2.1 Press the selector left or right to
highlight the year, month, day,
hour, or minute and press up
or down to change. To change the order
in which the year, month, and day are
displayed, highlight the date format and
press the selector up or down.

1. 1

12 : 00
AM

B Tip: The Camera Clock
If the battery is removed for an extended
period, e DATE/TIME will be cleared and the
language-selection dialog will be displayed
when the camera is turned on. Set up the
camera again. If the battery has been left in the
camera for about 2 hours or more, the battery
can be removed for about 24 hours without
resetting the clock.

Taking Pictures in SRC (SCENE RECOGNITION) Mode
This section describes how to take pictures in SRC (SCENE RECOGNITION) mode.
the camera on.
1 Turn
Press the n button to turn the

the battery level.
3 Check
Check the battery level in the display.

camera on.
q

Description
Battery partially discharged.
Battery more than half discharged.
Low battery. Charge as soon as
possible.
Battery exhausted. Turn camera off
and charge battery.

Basic Photography and Playback

Select SRC mode.
2 Rotate
the mode dial to SRC.

Indicator
Q
(white)
P
(white)
O
(red)
N
(blinks red)

B Tip: SCENE RECOGNITION
Simply by pointing the camera to the subject, the
camera automatically analyzes and selects the most
appropriate setting using scene recognition.

Taking Pictures in SRC (SCENE RECOGNITION) Mode

a picture using the zoom control.
4 Frame
The camera analyzes a subject based on
scene recognition, then an icon appears in
the bottom left of the monitor.
(The illustration shows
when the camera
analyzed subject(s) in
portrait.)
Subject

Icon

PORTRAIT

LANDSCAPE I

NIGHT

MACRO

BACKLIT
PORTRAIT

NIGHT
PORTRAIT

Description
For soft-toned portraits with
natural skin tones.
For crisp, clear daylight shots of
buildings and landscapes.
For night and twilight scenes,
using a high sensitivity setting
to minimize blurring.
For clear close-ups of flowers,
etc.
For a subject backlit against
the sun, preventing the
background from becoming
dim.
For a subject in a dim place,
reducing blur.

B Tip
When a subject can not be analyzed by the camera,
LAUTO mode will be set.
A Notes
• B Intelligent Face Detection is turned on
automatically.
• The camera continuously adjusts focus on a face, or
the center area of the monitor.
• Continuous auto focus will be audible and will
increase battery drain.
• Macro mode is set when K is set.

Taking Pictures in SRC (SCENE RECOGNITION) Mode
How to use the zoom control
Select B to zoom out

Select A to zoom in

Holding the Camera
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.

Zoom indicator
Basic Photography and Playback

To prevent pictures that
are out of focus or too dark
(underexposed), keep your
fingers and other objects
away from the lens and
flash.

Z DIGITAL IS
If the subject is poorly lit, blurring caused by camera shake can be reduced by activating the Z DIGITAL IS
(pg. 73). Note that blurring may still occur depending on the scene or shooting conditions.
A Note
When the setting is off, i is displayed.

Taking Pictures in SRC (SCENE RECOGNITION) Mode
Framing Guideline (Best Framing)
In shooting mode, press DISP/BACK to select a
shooting display format. The selection changes
each time DISP/BACK is pressed.

Focus.
5 Press
the shutter button halfway
to focus.
A Note
The lens may make a noise when the camera
focuses. This is normal.

INFORMATION
ON

INFORMATION
OFF

BEST FRAMING
• Best Framing: To use the best framing, position the
main subject at the intersection of two lines or
align one of the horizontal lines with the horizon.

If the camera is able to focus, it will beep twice
and the indicator lamp will glow green.
If the camera is unable to focus, the red colored
focus frame and R will appear in the
monitor, and the indicator lamp will blink
green. Change the composition or use
focus lock (pg. 27).

Taking Pictures in SRC (SCENE RECOGNITION) Mode

Shoot.
6 Smoothly
press the shutter

The Indicator Lamp

button the rest of the way down
to take the picture.

Double
beep
q

Press halfway

Click
w

Press the rest of
the way down

A Note
If the subject is poorly lit, the flash may fire when the
picture is taken. For information on using the flash
when lighting is poor, see page 32.

The indicator lamp shows camera status as follows:
Indicator lamp
Camera status
Glows green Focus locked.
Blur, focus, or exposure warning.
Blinks green
Picture can be taken.
Blinks green Recording pictures. Additional
and orange pictures can be taken.
Glows
Recording pictures. No additional
orange
pictures can be taken at this time.
Flash charging; flash will not fire
Blinks orange
when picture is taken.
Blinks red Lens or memory error.
B Tip: Warnings
Detailed warnings appear in the display. See pages
89–92 for more information.

Basic Photography and Playback

B Tip: The Shutter Button
The shutter button has two positions. Pressing the
shutter button halfway (q) sets focus and exposure;
to shoot, press the shutter button the rest of the way
down (w).

Indicator lamp

Viewing Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.

1 Press the D button.

Deleting Pictures
To delete the picture currently displayed
in the monitor, press the selector up (I).
The following dialog will be displayed.
ERASE OK?

The most recent picture will be displayed in
the monitor.
100 0001
100-0001
400

12 / 31 / 2050 10 : 00 AM
1/250 F3.3

additional pictures.
2 View
Press the selector right to view
pictures in the order recorded, left
to view pictures in reverse order.
Press the shutter button to exit to shooting
mode.

OK
CANCEL

SET

To delete the picture, highlight OK and
press MENU/OK. To exit without deleting
the picture, highlight CANCEL and press
MENU/OK.
B Tip: The Playback Menu
Pictures can also be deleted from the playback
menu (pg. 41).

Shooting Mode
Choose a shooting mode according to the scene or type of subject. To choose a shooting mode,
rotate the mode dial to the desired setting (pg. 4). The following modes are available:

A NATURAL & K

Simply by pointing the camera to the subject,
the camera automatically analyzes and selects
the most appropriate setting using scene
recognition.
See “Taking Pictures in SRC (SCENE
RECOGNITION) mode” (pg. 13).

This mode helps ensure good results with backlit
subjects and in other situations with difficult
lighting. Each time the shutter button is pressed,
the camera takes two shots: one shot without
the flash to preserve natural lighting, followed
immediately by a second shot with the flash. Do
not move the camera until shooting is complete.

k AUTO
Choose for crisp, clear snapshots. This mode is
recommended in most situations.

P PROGRAM AE
Program AE sets both shutter speed and lens
aperture. The camera lets you control camera
settings such as exposure compensation (pg. 29),
white balance (pg. 61), and ISO sensitivity (pg. 60).

A Notes
• Do not use where flash photography is prohibited.
The flash will fire even in silent mode.
• Only available if memory remains for two pictures.

More on Photography

SRC SCENE
E E RECOGNITION
EC

Shooting Mode

B NATURAL
LL
LIGHT
G

3 Highlight A SCENE POSITION.

Capture natural light indoors,
under low light, or where the
flash can not be used. The
flash turns off and sensitivity is
raised to reduce blur.

the selector right to display
4 Press
shooting mode options.
the selector up or down to
5 Press
highlight a scene (pg. 23).

D/E SCENE POSITION
The camera offers a choice of “scenes,” each
adapted to particular shooting conditions or a
specific type of subject, which can be assigned
to the D/E position on the mode dial:

1 Rotate the mode dial to D/E.

SCENE POSIT ON
ISO
IMAGE SIZE
IMAGE QUALITY
WH TE BALANCE
CONTINUOUS
EXIT

Portrait with soft
overall tone and
beautiful skin tones
SET
CANCEL

MENU/OK to select the
6 Press
highlighted option.

MENU/OK to display the
2 Press
following menu.
SHOOTING MENU

PORTRAIT

1/2
AUTO
N
AUTO
OFF

DISP/BACK to exit from the
7 Press
menu.
Until the setting is changed as described above,
the chosen scene will be selected whenever the
mode dial is rotated to D/E.

Shooting Mode

U PORTRAIT
Choose this mode for soft-toned portraits with
natural skin tones.
d BABY MODE
Choose for natural skin tones when taking
portraits of infants. The flash turns off
automatically.

K LANDSCAPE
Choose this mode for crisp, clear daylight shots
of buildings and landscapes.

1 Select W.
the selector up to select a
2 Press
frame, and press the selector left
or right to highlight a pan direction
and press MENU/OK.
1

2 3

2 1

a photograph.
3 Take
Exposure and white balance for the

More on Photography

2 SMILE
The shutter is released automatically when
Intelligent Face Detection detects a smiling face.

W PANORAMA
In this mode, you can take up to three pictures
and join them together to form a panorama.
Use of a tripod is recommended to assist in
composing overlapping shots.

panorama are set with the first shot.

Shooting Mode

MENU/OK.
4 Press
An edge of the picture you have

MENU/OK to complete the
8 Press
panorama.

just taken will be displayed at one
side of the frame.
19

2 3

SELECT FRAME

the next shot to overlap with the
5 Frame
previous picture.

the second shot as described in steps
6 Take
3-4 (to create a panorama from only two
frames, press the selector up after the
second shot).
the last shot, framing it to
7 Take
overlap the second picture.
22

MENU/OK to save the picture
9 Press
(the individual shots are not saved).
Printing Pictures Taken in Panorama Mode
Depending on the number of photographs they
contain, panoramas may not print correctly on some
sizes of paper. Part of the image may not be printed
or the image may print with unusually wide margins
at the top and bottom or left and right.

Shooting Mode

L SPORT
Choose this mode when photographing moving
subjects. Priority is given to faster shutter
speeds.

F SNOW
Choose for crisp, clear shots that capture the
brightness of scenes dominated by shining white
snow.

D NIGHT
A high sensitivity setting is selected
automatically to minimize blurring for recording
night and twilight scenes.

G BEACH
Choose for crisp, clear shots that capture the
brightness of sunlit beaches.

W FIREWORKS
Slow shutter speeds are used to capture the
expanding burst of light from a firework. Press
the selector left or right to choose a shutter
speed. Use of a tripod is recommended to
prevent blur. The flash turns off automatically.

I PARTY
Capture indoor background lighting under lowlight conditions.
O FLOWER
Choose for vivid close-ups of flowers. The
camera focuses in the macro range and the flash
turns off automatically.
P TEXT
Take clear pictures of text or drawings in print.
The camera focuses in the macro range.

More on Photography

U NIGHT (TRIPOD)
Slow shutter speeds are used to record night
scenes. Use of a tripod is recommended to
prevent camera shake.

E SUNSET
Choose this mode to record the vivid colors in
sunrises and sunsets.

B Intelligent Face Detection
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for
group portraits (in vertical or horizontal orientations) to prevent the camera from focusing on the
background. Intelligent Face Detection also offers a red-eye removal option for removing “red-eye”
effects caused by the flash.
Intelligent Face Detection on.
1 Turn
1.1 Press MENU/OK to display the
shooting menu.
SHOOTING MENU
PROGRAM AE
ISO
IMAGE SIZE
IMAGE QUALITY
WHITE BALANCE
CONTINUOUS

1/2
AUTO
N
AUTO
OFF

EXIT

1.2 Press the selector up or
down to highlight 3 FACE
DETECTION.
1.3 Press the selector right
to display Intelligent Face
Detection options.
1.4 Press the selector up or down
to highlight the desired
option.
24

1.5 Press MENU/OK to select the
highlighted option and return
to shooting mode.
B icon appears in monitor
when Intelligent Face
Detection is on.
A Note
When removing red-eye effect, select ON for
a RED EYE REMOVAL in the setup menu (pg.
73).

the picture.
2 Frame
If a face is detected, it will
be indicated by a green
border. If there is more
than one face in the
frame, the camera will
Green border
select the face closest
to the center; other faces are indicated by
white borders.

B Intelligent Face Detection

Focus.
3 Press
the shutter button halfway
to focus on the subject in the
green border. Note that, in some
shooting modes, exposure is
adjusted for the current shooting mode
and may not be optimized for the selected
subject.

Shoot.
4 Press
the shutter button all the
way down to shoot.

Intelligent Face Detection
Intelligent Face Detection is
recommended when using the
self-timer for group- or selfportraits (pg. 34).

The following functions can be used with Intelligent
Face Detection.
RED EYE REMOVAL (pg. 65)/IMAGE SEARCH
(pg. 39)/SLIDE SHOW (pg. 64)/IMAGE DISP. >
ZOOM(CONTINUOUS) (pg. 75)/PRINT ORDER
(DPOF) (pg. 50)/CROP (pg. 66)

More on Photography

C Caution
If no face is detected when the shutter button is
pressed halfway (pg. 84), the camera will focus
on the subject at the center of the display and
red-eye will not be removed.

B Tip: Red-Eye Removal
Select ON for the R SAVE ORG IMAGE option
in the setup menu (pg. 72) to save unprocessed
copies of pictures created with red-eye removal.

C Caution
If the subject moves as the shutter button
is pressed, their face may not be in the area
indicated by the green border when the picture
is taken.

B Intelligent Face Detection

BLINK DETECTION
If an option other than OFF is selected for
a IMAGE DISP. (pg. 75), a warning will be
displayed if the camera detects subjects who
may have blinked when the picture was taken. If
ZOOM(CONTINUOUS) is selected, you can press
the F button to zoom in on these subjects; a
new face is selected each time the F button is
pressed.
BLINK DETECTION

FACE ZOOM
STORE

BLINK DETECTION

ERASE

NEXT
STORE

ERASE

If you are satisfied with the results, press MENU/OK
to save the image. If you want to try again, press
the selector up to delete the image and then
take another shot.
C Caution
Blink detection is not performed if the camera fails to
detect a face or when OFF is selected for a IMAGE
DISP.

Focus Lock
To compose photographs with off-center subjects:

1 Position the subject in the focus frame.

the picture.
3 Recompose
Keeping the shutter button pressed
halfway, recompose the picture.

focus and exposure. Focus and exposure
will remain locked while the shutter button
is pressed halfway (AF/AE lock).

Press
halfway

250

F3.3

250

F3 3
F3.3

Shoot.
4 Press
the shutter-release button the rest of
the way down to take the picture.

Press the rest of
the way down

More on Photography

Focus.
2 Press
the shutter button halfway to set

Repeat steps 1 and 2 as desired to refocus
before taking the picture.

Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects
listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 27) to focus on another
subject at the same distance and then recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.

• Fast-moving subjects.

•
•
•
•

Subjects photographed through a window or other reflective object.
Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
Insubstantial subjects, such as smoke or flame.
Subjects that show little contrast with the background (for example, subjects in clothing that is the same
color as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).

5 Exposure Compensation
Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.
the selector up (l).
1 Press
The exposure indicator will be displayed.

to shooting mode.
3 Return
Press MENU/OK to return to
shooting mode.

4 Take pictures.
SET

visible in the display.
Choose positive (+) values
to increase exposure

More on Photography

a value.
2 Choose
Press the selector button. The effect is

A Note
A 5 icon and exposure indicator are displayed at
settings other than ±0. Exposure compensation is not
reset when the camera is turned off; to restore normal
exposure control, choose a value of ±0.

Choose negative (–) values
to reduce exposure

5 Exposure Compensation
Choosing an Exposure Compensation Value
• Backlit subjects: choose values from +2/3 EV to +12/3 EV (for an explanation of the term “EV”,
see the Glossary on page 93)

• Highly reflective subjects or very bright scenes (e.g., snowfields): +1 EV

• Scenes that are mostly sky: +1 EV
• Spotlit subjects (particularly if photographed against dark backgrounds): –2/3 EV
• Subjects with low reflectivity (pine trees or dark-colored foliage): –2/3 EV

L Macro Mode (Close-ups)
For close-ups, press the selector left (L). The selection changes each time the selector is pressed.
OFF
MACRO

When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use the
zoom control to compose pictures.
More on Photography

A Notes
• Use of a tripod is recommended to prevent blur caused by camera shake.
• The flash may fail to light the entire subject at very short ranges. Increase the distance to the subject and try
again.

K Using the Flash (Intelligent Flash)
When the flash is used, the camera’s Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the
flash when lighting is poor, for example when shooting at night or indoors under low light.
a flash mode.
1 Choose
Press the selector right (K). The flash mode changes each time the
selector is pressed; in modes other than 4, the current mode
is indicated by an icon in the display. Choose from the following
options:
Mode
Description
4 (AUTO FLASH) The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural
K (FORCED FLASH)
coloration when shooting in bright light.
The flash does not fire even when the subject is poorly lit. 0 will appear in the
W (SUPPRESSED
monitor at slow shutter speeds to warn that pictures may be blurred. Use of a
FLASH)
tripod is recommended.
Capture both the main subject and the background under low light (note that
T (SLOW SYNCHRO)
brightly lit scenes may be overexposed).

K Using the Flash (Intelligent Flash)

Focus.
2 Press
the shutter button halfway
to focus. If the flash will fire,
X will be displayed when the
shutter button is pressed halfway.
At slow shutter speeds, 0 will appear in
the display to warn that pictures may be
blurred; use of a tripod is recommended.

of the way down to shoot.
C Caution
The flash may fire several times with each shot.
Do not move the camera until shooting is
complete.
Red-Eye Removal
When Intelligent Face Detection is active
(pg. 24), and ON is selected for a RED
EYE REMOVAL in the setup menu (pg.
73), red-eye removal is available in V,
U, and Z. Red-eye removal minimizes
“red-eye” caused when light from the flash is
reflected from the subject’s retinas as shown in the
illustration at right.

The camera speaker, shooting indicator, flash, and
indicator and self-timer lamps turn off (note that the
flash will still fire in A mode). Flash and volume
settings (pg. 64) can not be adjusted while silent
mode is in effect. To restore normal operation, press
the DISP/BACK button until the U icon is no longer
displayed.

More on Photography

Shoot.
3 Press
the shutter button the rest

U Silent Mode
In situations in which camera sounds or light from
the flash may be unwelcome, press the DISP/BACK
button until U is displayed in the monitor.

J Using the Self-Timer
The camera offers a ten-second timer that allows photographers to appear in their own photographs,
and a two-second timer that can be used to avoid blur caused by the camera moving when the
shutter button is pressed. The self-timer is available in all shooting modes.
the timer.
1 Set
Press the selector down (J). The selection changes each time the selector is pressed. The
current self-timer mode is displayed in the monitor.
Choose from y (self-timer off),
c (10 s delay), or b (2 s delay)

OFF
OFF

Focus.
2 Press
the shutter button halfway to focus.
C Caution
Stand behind the camera when using the shutter button. Standing in front of the lens can
interfere with focus and exposure.

the timer.
3 Start
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.

J Using the Self-Timer

The self-timer lamp on the front of the camera will blink
immediately before the picture is taken. If the twosecond timer is selected, the self-timer lamp will blink
as the timer counts down.

More on Photography

Intelligent Face Detection
Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 24) is
recommended when using the self-timer for group portraits or self-portraits. To use the self-timer with
Intelligent Face Detection, turn Intelligent Face Detection on, set the timer as described in Step 1, and then
press the shutter button all the way down to start the timer. The camera will detect faces while the timer is
counting down and adjust focus and exposure immediately before the shutter is released. Be careful not to
move until the picture has been recorded.

Playback Options
To view the most recent picture in the monitor,
press the D button.
100 0001
100-0001

Choosing a Display Format
In playback mode, press DISP/BACK to select a
playback display format.

400

12 / 31 / 2050 10 : 00 AM
1 250 F3.3
1/250
F3 3

More on Playback

Press the selector right to view pictures
in the order recorded, left to view
pictures in reverse order. Keep the
selector pressed to scroll rapidly to the desired
frame.

The selection changes each time DISP/BACK is
pressed.
INFORMATION ON
INFORMATION OFF
100 0001
100-0001
400

12 / 31 / 2050 10 : 00 AM
1/250 F3.3

A Note
Pictures taken using other cameras are indicated by a e (“gift image”) icon during playback.

Playback Options

Playback
y
Zoom
Select A to zoom in on pictures displayed in
single-frame playback; select B to zoom out.
When the picture is zoomed in, the selector can
be used to view areas of the image not currently
visible in the display.
Zoom indicator
Navigation window shows
portion of image currently
displayed in monitor

A Note
The maximum zoom ratio varies with image size.
Playback zoom is not available with images saved or
cropped at the size of p, or copies created with
j RESIZE (pg. 67).

BACK

More on Playback

Press DISP/BACK to exit zoom.

Intelligent Face Detection
Pictures taken with Intelligent
Face Detection (pg. 24) are
indicated by a B icon. Press
the F button to zoom in on the
FACE ZOOM
subject selected with Intelligent
Face Detection. You can then
use the zoom control to zoom in and out.

Playback Options

Multi-Frame Playback
y
To change the number of images displayed,
select B when a picture is shown full-frame in
the monitor.

12 / 31 / 2050

Select B to
increase the
number of
pictures displayed
to one frame with
previous and next,
two, nine, and a
hundred.

Use the selector to highlight images and press
MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
B Tip: Two-Frame Display
Two-frame display can be used
to compare pictures taken in A
mode.

10 : 00 AM

Select A to
reduce the
number of images
displayed.

V Image Search
Image Search based on categories
Search for pictures by date, subject, scene, and
file type.
MENU/OK to display the
1 Press
playback menu.
the selector up or down to
2 Press
highlight V IMAGE SEARCH.

the selector up or down
4 Press
to highlight the desired search
category.
Option
BY DATE
BY FACE
BY SCENE
BY TYPE OF DATA

Description
Show images based on the
specified date.
Show images based on
specified face information.
Show images based on the
specified scene mode.
Show images based on whether
still pictures or movies.

A detailed search list will be
displayed.
a category in the list.
6 Select
Specified Images will be displayed.

More on Playback

MENU/OK to display the search
3 Press
category.

MENU/OK to select the
5 Press
highlighted search category.

V Image Search

Using
g Playback
y
Menu with Image
g Search
Three playback menus can be performed with
image search mode.
MENU/OK while the search
1 Press
results are displayed.
The playback menu will be
displayed.
the selector up or down to
2 Press
highlight the desired menu item.
MENU/OK to select the
3 Press
highlighted menu.
B Tips
• For each operation, refer to the page listed.
Option
See Page
41
MERASE
65
OPROTECT
64
qSLIDE SHOW
• Select EXIT SEARCH to go back to the normal
playback mode.

M Deleting Pictures
The ERASE option in the playback menu can be used to delete still pictures and movies, increasing
the amount of space available on the memory card or in internal memory (for information on
deleting pictures in single-frame playback, see page 18). Note that deleted pictures can not be
recovered. Copy important pictures to a computer or other storage device before proceeding.
MENU/OK to display the
1 Press
playback menu.
PLAYBACK MENU

the selector up or down to
4 Press
highlight FRAME or ALL FRAMES.
1 /2

IMAGE SEARCH
ERASE
SLIDE SHOW
RED EYE REMOVAL
PROTECT
CROP

MENU/OK to display options for
5 Press
the selected item (see following
page).

EXIT

the selector right to display
3 Press
delete options.
PLAYBACK MENU
IMAG
BACK
ERAS
SLIDE FRAME
RED E ALL FRAMES
PROT
CROP

1 /2

B Tips: Deleting Pictures
• When a memory card is inserted, pictures will be
deleted from the memory card; otherwise, pictures
will be deleted from internal memory.
• Protected pictures can not be deleted. Remove
protection from any pictures you wish to delete (pg.
65).
• If a message appears stating that the selected
images are part of a DPOF print order, press MENU/OK
to delete the pictures.

More on Playback

the selector up or down to
2 Press
highlight M ERASE.

M Deleting Pictures

■ FRAME: Deleting Selected Images
Selecting FRAME displays the
dialog shown at right.

■ ALL FRAMES: Deleting All Images
ERASE ALL OK?
Selecting ALL FRAMES
IT MAY TAKE A WHILE
displays the confirmation
OK
shown at right.
CANCEL

ERASE OK?

YES

Press the selector left or right
to scroll through pictures and
press MENU/OK to delete the
current picture (the picture
is deleted immediately; be
careful not to delete the
wrong picture).
Press DISP/BACK to exit when all the desired
pictures have been deleted.

SET

CANCEL

Highlight OK and press MENU/
OK to delete all unprotected
pictures.
The dialog shown at right is
displayed during deletion.
Press DISP/BACK to cancel
before all pictures have been
CANCEL
deleted (any pictures deleted
before the button was pressed can not be
recovered).

A Recording Movies
Shoot short movies at 30 frames per second. Sound is recorded via the built-in microphone; do not
cover the microphone during recording.
Rotate the mode dial to A (movie
1 mode).
12s
STAN BY

Display shows time
available

the shutter button all the way
2 Press
down to start recording.

12s

z REC and time
remaining are
displayed

A Notes
• Focus is set when recording begins; exposure
and white balance are adjusted automatically
throughout recording. The color and brightness
of the image may vary from that displayed before
recording begins.
• Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.

Movies

REC

Zoom control during movie recording
The camera lets you zoom in and out during movie
recording. Select the type of zoom available in
movie mode from the setup menu (pg. 71).
OPTICAL: sounds will not be recorded during zoom
operation.
DIGITAL: it may produce lower quality images than
optical zoom.

B Tip
There is no need to keep the shutter button pressed
during recording.

A Recording Movies

the shutter button halfway
3 Press
to end recording. Recording ends
automatically when the movie
reaches maximum length or
memory is full.
A Note
Movies are recorded as monaural motion JPEG files.

Choosing the Frame Size
To choose the frame size, press MENU/OK and select
o QUALITY.
Choose a pixel size in the following:
• )1280 (1280 × 720) for high definition movies
• ! (640 × 480) for standard definition movies
• 9 (320 × 240) for longer movies
SHOOTING MENU
QUAL

280

1/1
5m00s
10m59s
15m00s

D Viewing Movies
During playback, movies are
displayed in the monitor as
shown at right. The following
operations can be performed
while a movie is displayed:
Operation
Start/pause
playback
End
playback/
delete

100 006
100-006

Progress is shown in the monitor during
playback.
15s

12 / 31 / 2050
PLAY

10 : 00 AM

Progress bar
STOP

PAUSE

B Tip: Viewing Movies on a Computer
Copy movies to the computer before viewing.
C Caution
Do not cover the speaker during playback.

Movies

Description
Press the selector down to start playback.
Press again to pause.
Press the selector up to end playback. If
playback is not in progress, pressing the
selector up will delete the current movie.
Press the selector right to advance, left to
Advance/ rewind. If playback is paused, the movie
rewind will advance or rewind one frame each
time the selector is pressed.
Press MENU/OK to pause playback and
display volume controls. Press the
Adjust
selector up or down to adjust the
volume
volume; press MENU/OK again to resume
playback.

Viewing Pictures on TV
Connect the camera to a TV and tune the television to the video channel to show pictures to a group.
Connect an A/V cable (optional), as shown below. Be sure that the camera is off before connecting
the cable.
Insert an optional
A/V cable into the
USB multi-connector
of the camera.

Connect yellow plug
to video-in jack

Connect white plug
to audio-in jack

Press D for about a second to turn the camera on. The camera monitor turns off and pictures and
movies are played back on the TV. Note that the camera volume controls have no effect on sounds
played on the TV; use the television volume controls to adjust the volume.
Connections

A Note
Image quality drops during movie playback.
C Cautions
• When connecting the cable, be sure the connectors are fully inserted.
• HD movies are played back as standard definition movies on the TV if using an optional A/V cable.
• To play back High Definition movies on HDTV, optional accessories are required. For more information, please
refer to the following URL.
http://www.fujifilm.com/products/digital_cameras/index html

Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.

Connecting the Camera

Printing Selected Pictures

the supplied USB cable as shown
1 Connect
and turn the printer on.

the selector left or right to
1 Press
display a picture you wish to print.
A Note
To print one copy of the current picture, proceed
directly to Step 3.

the selector up or down to
2 Press
choose the number of copies (up
to 99). Repeat steps 1–2 to select
additional pictures.

displayed in the monitor, followed by the
PictBridge display shown below at right.
USB

MENU/OK to display a
3 Press
confirmation dialog.
PRINT THESE FRAMES
TOTAL: 9 SHEETS

PICTBRIDGE
TOTAL: 00000
YES

Connections

the D button for about a second
2 Press
to turn the camera on. w USB will be

CANCEL

00 SHEETS
FRAME
OK

SET

4 Press MENU/OK to start printing.
47

Printing Pictures via USB
B Tip: Printing the Date of Recording
To print the date of recording on pictures, press
DISP/BACK in steps 1–2 to display the PictBridge menu
(see “Printing the DPOF Print Order,” on pg. 49).
Press the selector up or down to highlight PRINT
WITH DATE y and press MENU/OK to return to the
PictBridge display (to print pictures without the date
of recording, select PRINT WITHOUT DATE). To
ensure that the date is correct, set the camera clock
before taking pictures. Note that the PRINT WITH
DATE y option is only available with printers that
support date printing.
A Notes
• Print pictures from internal memory or a memory
card that has been formatted in the camera.
• When pictures are printed via direct USB connection,
page size, print quality, and border selections are
made using the printer.

During Printing
The message shown at right is
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
on the printer, printing may end
before the current picture has
printed).

PRINTING

CANCEL

If printing is interrupted, press D to turn the camera
off and then on again.
Disconnecting the Camera
Confirm that the above message is not displayed
and turn the camera off. Disconnect the USB cable.

Printing Pictures via USB

Printing the DPOF Print Order
To print the print order created with r PRINT
ORDER (DPOF) in the playback menu (pg. 50):
In the PictBridge display, press DISP/
1 BACK
to open the PictBridge menu.

MENU/OK to display a
3 Press
confirmation dialog.
PRINT DPOF OK?
TOTAL: 9 SHEETS

PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF

YES

CANCEL

4 Press MENU/OK to start printing.
the selector up or down to
2 Press
highlight x PRINT DPOF.

Connections

Printing Pictures via USB

Creating a DPOF Print Order
The r PRINT ORDER (DPOF) option in the
playback menu can be used to create a digital
“print order” for PictBridge-compatible printers
(pg. 49) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is
standard that allows pictures to be printed
from “print orders” stored in internal
memory or on a memory card. The information in
the order includes the pictures to be printed and the
number of copies of each picture.

■ WITH DATE y / WITHOUT DATE
To modify the DPOF print order, select r PRINT
ORDER (DPOF) in the playback menu and press
the selector up or down to highlight WITH
DATE y or WITHOUT DATE.
PLAYBACK MENU
RESI
IMAG WITH DATE
COPY WITHOUT DATE
PR N RESET ALL

WITH DATE y: Print date of
recording on pictures.
WITHOUT DATE: Print pictures without
date.

Press MENU/OK and follow the steps below.
the selector left or right
1 Press
to display a picture you wish to
include in or remove from the print
order.
the selector up or down to
2 Press
choose the number of copies (up to
99). To remove a picture from the
order, press the selector down until
the number of copies is 0.
PRINT ORDER (DPOF)
DPOF: 00001

Total number of prints
Number of copies

01 SHEETS
FRAME

SET

B Tip: Intelligent Face Detection
If the current picture was created with Intelligent
Face Detection, pressing F sets the number of
copies to the number of faces detected.

Printing Pictures via USB

steps 1–2 to complete the
3 Repeat
print order. Press MENU/OK to save
the print order when settings
are complete, or DISP/BACK to exit without
changing the print order.
total number of prints is
4 The
displayed in the monitor. Press
MENU/OK to exit.
The pictures in the current
print order are indicated by a
x icon during playback.

A Notes
• Remove the memory card to create or modify a print
order for the pictures in internal memory.
• Print orders can contain a maximum of 999 pictures.
RESET DPOF OK?
• If a memory card is inserted
containing a print order
created by another camera, the
message shown at right will be
YES
CANCEL
displayed. Pressing MENU/OK
cancels the print order; a new
print order must be created as described above.
• Whether WITH DATE y/WITHOUT DATE is
available may depend on the printer setting. Check
the printer.

Connections

■ RESET ALL
RESET DPOF OK?
To cancel the current print
order, select RESET ALL in the
r PRINT ORDER (DPOF)
menu. The confirmation
YES
CANCEL
shown at right will be
displayed; press MENU/OK to remove all pictures
from the order.

Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored,
viewed, organized, and printed. Before proceeding, install the software as described below. Do NOT
connect the camera to the computer until installation is complete.

Installing the Software
Two applications are supplied: MyFinePix Studio for Windows and FinePixViewer for the Macintosh.
Installation instructions for Windows are on pages 52–53, those for the Macintosh on pages 54–55.
Windows: Installing MyFinePix Studio
Confirm that the computer meets the following system requirements:

CPU
RAM
Free disk space
Video
Other

•
•
•
•

Windows 7*
Windows Vista*
Windows XP*
3 GHz Pentium 4 or better
2 GHz Pentium 4 or better
1 GB or more
512 MB or more
15 GB or more
2 GB or more
1,024 × 768 pixels or more with 24-bit color or better
A graphics processing unit (GPU) that supports DirectX 7 or later
Built-in USB port recommended. Operation is not guaranteed other USB ports.
Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option.

* Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not
guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.

Viewing Pictures on a Computer

2 Start the computer. Log in to an account with administrator privileges before proceeding.
3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed;
click Yes (Windows 7) or click Allow (Windows Vista).

The installer will start automatically; click Installing MyFinePix Studio and follow the on-screen
instructions to install MyFinePix Studio.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu, then
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.EXE.

prompted to install Windows Media Player or DirectX, follow the on-screen instructions to
4 Ifcomplete
installation.

version number is printed at the top of the CD label for reference when updating the software or
contacting customer support.
Installation is now complete. Proceed to “Connecting the Camera” on page 56.

Connections

the installer CD from the CD-ROM drive when installation is complete. Store the installer
5 Remove
CD in a dry location out of direct sunlight in case you need to re-install the software. The

Viewing Pictures on a Computer

Macintosh: Installing FinePixViewer
Confirm that the computer meets the following system requirements:

CPU

PowerPC or Intel
Pre-installed versions of Mac OS X version 10.3.9–10.6 (for the latest information, visit http://www.fujifilm.
OS
com/)
RAM
256 MB or more
Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
Video
800 × 600 pixels or more with thousands of colors or better
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
Other
• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option.

starting the computer and quitting any applications that may be running, insert the installer
2 After
CD in a CD-ROM drive and double-click Installer for Mac OS X.
installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter
3 An
an administrator name and password when prompted and click OK, then follow the on-screen
instructions to install FinePixViewer. Click Exit to quit the installer when installation is complete.

Viewing Pictures on a Computer

the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
4 Remove
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software. The version number
is printed at the top of the CD label for reference when updating the software or contacting
customer support.
OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select
5 Mac
Preferences… from the Image Capture application menu. The Image Capture preferences dialog
will be displayed. Choose Other… in the When a camera is connected, open menu, then
select FPVBridge in the “Applications/FinePixViewer” folder and click Open. Quit Image Capture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications” folder and start
Image Capture. The camera will be listed under DEVICES; select the camera and choose
FPVBridge from the Connecting this camera opens menu and click Open. Quit Image
Capture.
Installation is now complete. Proceed to “Connecting the Camera” on page 56.
Connections

Viewing Pictures on a Computer

Connecting the Camera
pictures you wish to copy are stored
1 Ifonthea memory
card, insert the card into the
camera (pg. 8). If no card is inserted, pictures
will be copied from internal memory.
A Note
Windows users may require the Windows CD
when starting the software for the first time.
C Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera.

the camera off and connect the supplied
2 Turn
USB cable as shown, making sure the
connectors are fully inserted. Connect the
camera directly to the computer; do not use a
USB hub or keyboard.

the D button for about a
3 Press
second to turn the camera on.
MyFinePix Studio or FinePixViewer will
start automatically; follow the on-screen
instructions to copy pictures to the computer.
To exit without copying pictures, click Cancel.
C Caution
If the software does not start automatically,
the software may not be correctly installed.
Disconnect the camera and reinstall the software.

For more information on using the supplied
software, start the application and select the
appropriate option from the Help menu.

Viewing Pictures on a Computer
Disconnecting the Camera
After confirming that the indicator lamp is out,
follow the on-screen instructions to turn the camera
off and disconnect the USB cable.
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no
longer required or before beginning reinstallation.
After quitting the software and disconnecting
the camera, drag the “FinePixViewer” folder from
“Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control
panel and use “Programs and Features” (Windows 7/
Windows Vista) or “Add or Remove Programs”
(Windows XP) to uninstall MyFinePix Studio. Under
Windows, one or more confirmation dialogs may be
displayed; read the contents carefully before clicking
OK.

Connections

C Cautions
• If a memory card containing a large number of
images is inserted, there may be a delay before the
software starts and you may be unable to import or
save images. Use a memory card reader to transfer
pictures.
• Make sure that the computer does not display a
message stating that copying is in progress and that
the indicator lamp is out before turning the camera
off or disconnecting the USB cable (if the number of
images copied is very large, the indicator lamp may
remain lit after the message has cleared from the
computer display). Failure to observe this precaution
could result in loss of data or damage to internal
memory or the memory card.
• Disconnect the camera before inserting or removing
memory cards.
• In some cases, it may not be possible to access
pictures saved to a network server using
the supplied software in the same way as on a
standalone computer.
• The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.

Using the Menus: Shooting Mode
Using the Shooting Menu
MENU/OK to display the
1 Press
shooting menu.
SHOOTING MENU
PROGRAM AE
ISO
IMAGE SIZE
IMAGE QUALITY
WH TE BALANCE
CONTINUOUS

the selector up or down to
4 Press
highlight the desired option.
1/2
AUTO
N
AUTO
OFF

EXIT

Press the selector up or down to
highlight the desired menu item.

the selector right to display
3 Press
options for the highlighted item.
SHOOTING MENU
AUTO

Menus

N
AUTO
CON

TOP 3
OFF

1/2

MENU/OK to select the
5 Press
highlighted option.
DISP/BACK to exit from the
6 Press
menu.

Using the Menus: Shooting Mode

Shooting Menu Options
Menu item

Description

Options
U/d/2/K/W/L/D/U/
A SCENE POSITION Choose a scene for D/E mode (pg. 20).
W/E/F/G/I/O/P
Adjust ISO sensitivity (pg. 60). Choose higher
AUTO / 3200 / 1600 /
n ISO
values when the subject is poorly lit.
800 / 400 / 200 / 100
i/y3:2/
JX260/JX250/
r16:9/7/n/
JV160/JV150
m16:9/m/p
1/2
Choose image size (pg. 60).
o IMAGE SIZE
y/!3:2/
JX210/JX200/
g16:9/0/n/
JV110/JV100
m16:9/m/p
FINE / NORMAL
T IMAGE QUALITY Choose image quality (pg. 61).
AUTO/p/q/s/t/u/r
C WHITE BALANCE Adjust color for different light sources (pg. 61).
Shoot a series of pictures (pg. 62).
m / OFF
E CONTINUOUS
Turn Intelligent Face Detection on or off (pg.
ON / OFF
3 FACE DETECTION
24).
2/2
Choose how the camera selects a focus area
w/X
F AF MODE
(pg. 62).

AUTO
i

y
NORMAL
AUTO
OFF
—
w

Menus

A Note
Some options are not available in all shooting modes.

Default
SP1: W
SP2: 2

Using the Menus: Shooting Mode

n ISO
Control the camera’s sensitivity to light. Higher
values can be used to reduce blur when lighting
is poor; note, however, that mottling may appear
in pictures taken at high sensitivities. If AUTO is
selected, the camera will adjust sensitivity
automatically in response to shooting conditions.
Settings other than AUTO
are shown by an icon in the
display.

o IMAGE SIZE
Choose the size at which still pictures are
recorded. Large pictures can be printed at large
sizes with no drop in quality; small pictures
require less memory, allowing more pictures to
be recorded.
Option
i, y,
!, r
g, 7,
0
n
m
p

Prints at sizes up to
31 × 23 cm (12 × 9 in.) or
31 × 21 cm (12 × 8 in.)
22 × 16 cm (8.5 × 6.5 in.)
17 × 13 cm (7 × 5 in.)
14 × 10 cm (5.3 × 4 in.)
5 × 4 cm (2 × 1.5 in.). Suited to e-mail or
the web.

The number of pictures that can be taken at
current settings (pg. 94) is displayed to the top
right in the monitor.

Using the Menus: Shooting Mode
Aspect Ratio
Pictures with an aspect ratio of 4 : 3 have the same
proportions as the camera display. Pictures with an
aspect ratio of 3 : 2 have the same proportions as a
frame of 35-mm film, while an aspect ratio of 16 : 9 is
suited to display on High Definition (HD) devices.

C WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of “white
balance,” see the Glossary on page 93).
Option

4:3

3:2

T IMAGE QUALITY
Choose how much image files are compressed.
Select FINE (low compression) for higher image
quality, NORMAL (high compression) to increase
the number of pictures that can be stored.

Description

AUTO White balance adjusted automatically.

16 : 9

For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
Menus

A Note
Image quality is not reset when the camera is turned
off or another shooting mode is selected.

p
q
s
t
u
r

Using the Menus: Shooting Mode

If AUTO does not produce the desired results
(for example, when taking close-ups), choose the
option that matches the light source.
A Note
Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.

E CONTINUOUS
Capture motion in a series of pictures. The
camera takes up to three pictures while the
shutter-release button is pressed.
A Notes
• Frame rate varies with shutter speed.
• Focus and exposure are determined by the first
frame in each series.
• The number of pictures that can
STOR NG
be recorded depends on the
memory available. Additional
time may be required to record
pictures when shooting ends.
The pictures are displayed in the
monitor while recording is in progress.

F AF MODE
This option controls how the camera selects the
focus area. Regardless of the option selected,
the camera will focus on the subject in the
center of the monitor when macro mode is on
(pg. 31).
• w CENTER: The camera
focuses on the subject in
the center of the frame. This
option can be used with
focus lock.
• X TRACKING: When X is set, the focus frame
is displayed in the center of the monitor as
shown. Place the subject in the focus frame
and press the G button to set TRACKING.
The focus frame will track the moving subject,
keeping it in focus.

START TRACKING

CANCEL

A Note
TRACKING may not work depending on the subject.

Using the Menus: Playback Mode
Using the Playback Menu
D to enter playback mode
1 Press
(pg. 11).

PLAYBACK MENU

MENU/OK to display the
2 Press
playback menu.
PLAYBACK MENU

the selector right to display
4 Press
options for the highlighted item.

1 /2

IMAGE SEARCH
ERASE
SLIDE SHOW
RED EYE REMOVAL
PROTECT
CROP
EXIT

the selector up or down to
3 Press
highlight the desired menu item.

1 /2

IMAG
BACK
ERAS
SLIDE FRAME
RED ALL FRAMES
PROT
CROP

the selector up or down to
5 Press
highlight the desired option.
MENU/OK to select the
6 Press
highlighted option.

Menus

Using the Menus: Playback Mode

Playback
y
Menu Options
The following options are available:
Option

Description
Search images based on categories
V IMAGE SEARCH
(pg. 39).
Delete all or selected pictures
M ERASE
(pg. 41).
View pictures in a slide show (pg.
q SLIDE SHOW
64).
1/2
Create copies with reduced red
a RED-EYE REMOVAL
eye (pg. 65).
Protect pictures from accidental
O PROTECT
deletion (pg. 65).
Create cropped copies of pictures
R CROP
(pg. 66).
Create small copies of pictures
j RESIZE
(pg. 67).
Rotate pictures (pg. 68).
N IMAGE ROTATE
Copy pictures between internal
2/2 P COPY
memory and a memory card (pg.
69).
Select pictures for printing on
r PRINT ORDER
DPOF- and PictBridge-compatible
(DPOF)
devices (pg. 49).

q SLIDE SHOW
PLAYBACK MENU
1
View pictures in an automated
IMAG
NORMAL
ERAS
slide show. Choose the type
NORMAL
SLIDE
WIPE
RED E WIPE
of show and press MENU/OK
PROT
CROP
to start. Press DISP/BACK at
any time during the show to
view on-screen help. When a movie is displayed,
movie playback will begin automatically, and the
slide show will continue when the movie ends.
The show can be ended at any time by pressing
MENU/OK.
/2

A Note
The camera will not turn off automatically while a
slide show is in progress.
Option

Description
Press
selector
left
or right to go back or
NORMAL
skip ahead one frame. Select WIPE for
WIPE
wipe transitions between frames.
As above, except that camera
NORMAL B
automatically zooms in on faces
selected with Intelligent Face detection
WIPE B
(pg. 24).

Using the Menus: Playback Mode

a RED EYE REMOVAL
If the current picture is marked with a B icon
to indicate that it was taken with Intelligent Face
Detection, this option can be used to remove
red-eye. The camera will analyze the image; if
red-eye is detected, the image will be processed
to create a copy with reduced red-eye.
REMOV NG

O PROTECT
Protect pictures from accidental deletion. The
following options are available.
■ FRAME
Protect selected pictures.
the selector left or right to
1 Press
display the desired picture.
PROTECT OK?

YES

CANCEL

Picture not protected

YES

CANCEL

Protected picture

MENU/OK to protect the
2 Press
picture. If the picture is already
protected, pressing MENU/OK will
remove protection from the image.
steps 1–2 to protect
3 Repeat
additional images. Press DISP/BACK

Menus

A Notes
• Red eye may not be removed if the camera is unable
to detect a face or the face is in profile. Results may
differ depending on the scene. Red eye can not
be removed from pictures that have already been
processed using red-eye removal or pictures created
with other devices.
• The amount of time needed to process the image
varies with the number of faces detected.
• Copies created with a RED EYE REMOVAL are
indicated by a l icon during playback.

UNPROTECT OK?

to exit when the operation is
complete.
65

Using the Menus: Playback Mode

■ SET ALL
Press MENU/OK to protect all
pictures, or press DISP/BACK to
exit without changing picture
status.
■ RESET ALL
Press MENU/OK to remove
protection from all pictures, or
press DISP/BACK to exit without
changing picture status.

SET ALL OK?
IT MAY TAKE A WHILE

YES

CANCEL

RESET ALL OK?
IT MAY TAKE A WHILE

YES

CANCEL

If the number of pictures
affected is very large, the
display at right will appear
in the monitor while the
CANCEL
operation is in progress.
Press DISP/BACK to exit before the operation is
complete.
C Caution
Protected pictures will be deleted when the memory
card or internal memory is formatted (pg. 75).

R CROP
To create a cropped copy of a picture, play
the picture back and select R CROP in the
playback menu.
the zoom control to zoom in and out and
1 Use
use the selector to scroll the picture until the
desired portion is displayed (to exit to singleframe playback without creating a cropped
copy, press DISP/BACK).
CROP

YES

CANCEL

Zoom indicator
Navigation window
shows portion of
image currently
displayed in monitor

If the size of the final copy will be p, OK will
be displayed in yellow.

Using the Menus: Playback Mode
B Tip: Intelligent Face Detection
If the picture was shot with
Intelligent Face Detection (pg.
24), B will be displayed in the
monitor. Press the F button
to zoom in on the selected
face.

CROP

FACE CROPPING
YES
CANCEL

MENU/OK. A confirmation
2 Press
dialog will be displayed.
REC OK?

j RESIZE
To create a small copy of a picture, play the
picture back and select j RESIZE in the
playback menu.
the selector up or down
1 Press
to highlight t STANDARD or
s SMALL.
MENU/OK to select the
2 Press
highlighted option.
MENU/OK to copy the picture at
3 Press
the selected size.

REC

CANCEL

Copy size is shown at the top. Larger crops
produce larger copies; all copies have an
aspect ratio of 4 : 3.
Menus

MENU/OK to save the cropped
3 Press
copy to a separate file.

Using the Menus: Playback Mode

N IMAGE ROTATE
IMAGE ROTATE
By default, pictures taken in
tall orientation are displayed
in wide orientation. Use this
option to display pictures in
SET
CANCEL
the correct orientation in the
monitor. It has no effect on pictures displayed
on a computer or other device.

the selector down to
1 Press
rotate the picture 90 ° clockwise,
up to rotate the picture 90 °
counterclockwise.

A Notes
• Protected pictures can not be rotated. Remove
protection before rotating pictures (pg. 65).
• The camera may not be able to rotate pictures
created with other devices.

To rotate a picture, play the picture back and
select N IMAGE ROTATE in the playback menu.

MENU/OK to confirm the
2 Press
operation (to exit without rotating
the picture, press DISP/BACK).
The next time the picture is played back, it will
automatically be rotated.

Using the Menus: Playback Mode

P COPY
Copy pictures between internal memory and a
memory card.
the selector up or down to
1 Press
highlight d INTERNAL MEMORY
g x CARD (copy pictures from
internal memory to the memory
card) or x CARD g d INTERNAL
MEMORY (copy pictures from a
memory card to internal memory).
the selector right to display
2 Press
options for the highlighted item.
COPY

NTE FRAME
CAR ALL FRAMES

■ FRAME
Copy selected frames.

COPY OK?
100 0001

YES

CANCEL

the selector left or right to
1 Press
display the desired picture.

2 Press MENU/OK to copy the picture.
steps 1–2 to copy additional
3 Repeat
images. Press DISP/BACK to exit
when the operation is complete.

Menus

the selector up or down to
3 Press
highlight FRAME or ALL FRAMES.

B Tip: Copying Pictures Between Memory Cards
To copy pictures between two memory cards, insert
the source card and copy the pictures to internal
memory, then remove the source card, insert the
destination card, and copy the pictures from internal
memory.

4 Press MENU/OK.
69

Using the Menus: Playback Mode

■ ALL FRAMES
Press MENU/OK to copy all
pictures, or press DISP/BACK to
exit without copying pictures.

COPY ALL OK?
100 0001
IT MAY TAKE
A WHILE

YES

CANCEL

C Cautions
• Copying ends when the destination is full.
• DPOF print information is not copied (pg. 50).

The Setup Menu
Using the Setup Menu
the setup menu.
1 Display
1.1 Press MENU/OK to display the

Adjust settings.
2 2.1
Press the selector right to

menu for the current mode.

activate the setup menu.

1.2 Press the selector left to
highlight a left tab.

2.2 Press the selector up or down
to highlight a menu item.

1.3 Press the selector up or down
to select 4.
The setup menu appears.
SET UP

1 /4

DATE/TIME
TIME DIFFERENCE
SILENT MODE
RESET
FORMAT
EXIT

ENGLISH
OFF

SET UP

1 /4

DATE/TIME
TIME D FFERENCE
SILENT MODE
RESET
FORMAT

ENGLISH
OFF

EXIT

2.3 Press the selector right
to display options for the
highlighted item.

2.5 Press MENU/OK to select the
highlighted option.

Menus

2.4 Press the selector up or down
to highlight an option.

2.6 Press DISP/BACK to exit from the
menu.
71

The Setup Menu

Setup Menu Options
Menu item
e DATE/TIME
p TIME DIFFERENCE
nw
7 SILENT MODE
1/4
s RESET
m FORMAT
a IMAGE DISP.
b FRAME NO.
2/4 d OPERATION VOL.
e SHUTTER VOLUME
g PLAYBACK VOLUME
g LCD BRIGHTNESS

Description
Set the camera clock.
Set the clock to local time (pg. 74).
Choose a language.
Turn off the speaker, flash, and self-timer lamp.
Reset all settings except Frame number, DATE/TIME,
TIME DIFFERENCE, and VIDEO SYSTEM to default values. A
confirmation dialog will be displayed, press the selector
left or right to highlight OK and press MENU/OK.
Format internal memory or memory cards (pg. 75).
Choose how long pictures are displayed after shooting
(pg. 75).
Choose how files are named (pg. 76).
Adjust the volume of camera controls.
Adjust the volume of the shutter sound.
Adjust the volume for movie playback (pg. 76)
Control the brightness of the display (pg. 77).

Options
—
k/j
See page 98
ON / OFF

Default
—
k
ENGLISH
OFF

—

—
—
3 SEC / 1.5 SEC /
1.5 SEC
ZOOM (CONTINUOUS) / OFF
CONTINUOUS / RENEW
CONTINUOUS
q (high) / m (mid) /
m
n (low) / EOFF (mute)
—
7
—
0

The Setup Menu
Menu item
a LCD MODE
o AUTO POWER OFF
Z DIGITAL IS
3/4
a RED EYE REMOVAL
c DIGITAL ZOOM
c MOVIE ZOOM TYPE
R SAVE ORG IMAGE
4/4

u GUIDANCE DISPLAY
r VIDEO SYSTEM

Description
Enable or disable monitor power saving (pg. 77).
Choose the auto power off delay (pg. 77).
Reduces camera shake and moving-subject blur.
Remove “red-eye” effects caused by the flash.
Enable or disable digital zoom (pg. 78).
Choose the zoom type when recording movies.
Choose whether to save unprocessed copies of pictures
taken using red-eye removal.
Choose whether to display tool tips.
Choose a video mode for connection to a TV (pg. 46).

Options
ON / OFF
5 MIN / 2 MIN / OFF
AUTO / OFF
ON / OFF
ON / OFF
DIGITAL / OPTICAL

Default
ON
2 MIN
OFF
ON
OFF
DIGITAL

ON / OFF

OFF

ON / OFF
NTSC / PAL

ON
—

Menus

The Setup Menu

p TIME DIFFERENCE
When traveling, use this option to switch the camera clock instantly from your home time zone to the
local time at your destination.
the difference between local time
1 Specify
and your home time zone.
1.1 Press the selector up or down
to highlight j LOCAL.
1.2 Press the selector right to
display the time difference.
TIME DIFFERENCE
12 / 31 / 2050 10:00 AM
12 / 31 / 2050 10:00 AM

between local time and your
2 Switch
home time zone.
To set the camera clock to local time,
highlight j LOCAL and press MENU/OK.
To set the clock to the time in your home
time zone, select k HOME. If j LOCAL
is selected, j will be displayed in the
monitor for three seconds after the camera
enters shooting mode, and the date will be
displayed in yellow.

23
SET

CANCEL

1.3 Press the selector left or right
to highlight +, –, hours, or
minutes; press up or down to
edit. The minimum increment
is 15 minutes.
1.4 Press MENU/OK when settings
are complete.
74

2 / 31 / 2050

10 : 00 AM

After changing time zones, check that the
date and time are correct.

The Setup Menu

m FORMAT
FORMAT
Format internal memory or a
FORMAT OK?
ERASE ALL DATA
memory card. If a memory
OK
card is inserted in the camera,
CANCEL
x will be displayed in the
SET
dialog shown at right and
this option will format the memory card. If no
memory card is inserted, d will be displayed
and this option will format internal memory.
Highlight OK and press MENU/OK to begin
formatting.
C Cautions
• All data—including protected pictures—will be
deleted. Be sure important files have been copied to
a computer or other storage device.
• Do not open the battery cover during formatting.

Menus

a IMAGE DISP.
Choose how long pictures are displayed in the
monitor after shooting.
• 3 SEC: Pictures are displayed for about 3 s before
being recorded to the memory card.
• 1.5 SEC: Pictures are displayed for about 1.5 s
before being recorded to the memory card.
• ZOOM (CONTINUOUS): Pictures are displayed until
the MENU/OK button is pressed. Pictures can be
zoomed in to check fine details.
When the picture is zoomed in, the selector
can be used to view areas of the image not
currently visible in the display.
When the picture was taken with 3 FACE
DETECTION turned on, detected face is
zoomed. When more than one face was
detected, you can move to the next face by
pressing F.
ZOOM (CONTINUOUS) is disabled in the following
case:
- A is selected in the shooting mode.
- An option other than OFF is selected for
E CONTINUOUS.

The Setup Menu
A Notes
• Pictures taken in continuous shooting modes are
always displayed after shooting.
• The colors displayed at settings of 1.5 SEC and
3 SEC may differ from those in the final picture.

b FRAME NO.
New pictures are stored in
Frame number
100 0001
image files named using
a four-digit file number
Directory
File
assigned by adding one to
number
number
the last file number used.
The file number is displayed during playback as
shown at right. FRAME NO. controls whether
file numbering is reset to 0001 when a new
memory card is inserted or the current memory
card or internal memory is formatted.
• CONTINUOUS: Numbering continues from the
last file number used or the first available file
number, whichever is higher. Choose this
option to reduce the number of pictures with
duplicate file names.
• RENEW: Numbering is reset to 0001 after
formatting or when a new memory card is
inserted.
76

A Notes
• If the frame number reaches 999-9999, the shutter
release will be disabled (pg. 91).
• Selecting s RESET (pg. 72) resets b FRAME
NO. to CONTINUOUS but does not reset frame
numbering.
• Frame numbers for pictures taken with other
cameras may differ.

g PLAYBACK VOLUME
Press the selector up or down
to choose volume for movie
playback and press MENU/OK to
select.

VOLUME

7
SET

CANCEL

The Setup Menu

g LCD BRIGHTNESS
Press the selector up or down
to choose display brightness
and press MENU/OK to select.

LCD BRIGHTNESS

0
SET

CANCEL

a LCD MODE
If ON is selected, the monitor will dim to save
power if no operations are performed for
several seconds. Full brightness can be restored
by pressing the shutter button halfway. The
monitor does not dim in movie mode or during
playback.

o AUTO POWER OFF
Choose the length of time before the camera
turns off automatically when no operations
are performed. Shorter times increase battery
life; if OFF is selected, the camera must be
turned off manually. Note that regardless of the
option selected, the camera will not turn off
automatically when connected to a printer (pg.
47) or computer (pg. 52) or when a slide show is
in progress (pg. 64).
B Tip: Reactivating the Camera
To reactivate the camera after it has turned off
automatically, use the n button or press the D
button for about a second (pg. 11).

Menus

A Note
Although OFF is selected for o AUTO POWER OFF,
the camera will turn off automatically if no operations
are performed for five minutes in the following case:
• STANDBY is displayed in A.
• B is displayed in the shooting mode.

The Setup Menu

c DIGITAL ZOOM
If ON is selected, selecting A at the maximum
optical zoom position will trigger digital zoom,
further magnifying the image. To cancel digital
zoom, zoom out to the minimum digital zoom
position and select B.
Zoom
indicator

Zoom indicator,
DIGITAL ZOOM off
B

A B
Optical zoom

Zoom indicator,
DIGITAL ZOOM on

Optical zoom

A
Digital
zoom

C Caution
Digital zoom produces lower quality images than
optical zoom.

Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
■ Computer Related

■ Audio/Visual
TV*

USB

Audio/visual
output
HDTV*

Computer*

HD player
SD/SDHC
memory card

HDMI
cable*

Printer*
USB

Technical Notes

■ Printing

SD card slot or card reader

PictBridge-compatible printer*
* Available from third-party suppliers.

Optional Accessories

Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the
accessories available in your region, check with your local FUJIFILM representative or visit http://www.
fujifilm.com/products/digital_cameras/index.html.

Rechargeable
Li-ion battery

NP-45 (supplied)

Additional NP-45 large-capacity batteries can be
purchased as required.

A/V cable

AV-C1

Connects the camera and a TV.

HD player

HDP-L1

Still pictures and movies in SD card can be
viewed by HDTV (requires HDMI cable, available
from third-party suppliers).

Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.

■ Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.

■ Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If
this occurs, turn the camera off and wait an hour
before turning it on again. If condensation forms
on the memory card, remove the card and wait
for the condensation to dissipate.
Cleaning
Use a blower to remove dust from the lens and
monitor, then gently wipe with a soft, dry cloth.
Any remaining stains can be removed by wiping
gently with a piece of FUJIFILM lens-cleaning
paper to which a small amount of lens-cleaning
fluid has been applied. Care should be taken to
avoid scratching the lens or monitor. The camera
body can be cleaned with a soft, dry cloth.
Do not use alcohol, thinner, or other volatile
chemicals.

Technical Notes

Storage and Use
If the camera will not be used for an extended
period, remove the battery and memory card. Do
not store or use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very high
temperatures, such as in a closed vehicle on a
sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields, such as
near a broadcasting antenna, power line, radar
emitter, motor, transformer, or magnet
• in contact with volatile chemicals such as
pesticides
• next to rubber or vinyl products

Traveling
Keep the camera in your carry-on baggage.
Checked baggage may suffer violent shocks that
could damage the camera.
81

Troubleshooting
Power and Battery
Problem

Possible cause
The battery is exhausted.
The camera does The battery is not in the correct
orientation.
not turn on.
The battery-chamber cover is not latched.

Power
supply

Troubleshooting

Battery
charger

Solution
Insert a fresh or fully-charged spare battery.
Re-insert the battery in the correct
orientation.
Latch the battery-chamber cover.
Warm the battery by placing it in a pocket
The battery is cold.
or other warm place and re-insert it in the
camera immediately before taking a picture.
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
The battery runs
Select another shooting mode.
The camera is in SRC mode.
down quickly.
The battery has reached the end of its
The battery has been charged many times.
charging life. Purchase a new battery.
X TRACKING is selected for F AF
Select w CENTER for F AF MODE.
MODE.
The camera turns
The battery is exhausted.
Insert a fresh or fully-charged spare battery.
off suddenly.
The battery is not correctly inserted.
Re-insert the battery in the charger.
Charging does
The battery is not in the correct
Re-insert the battery in the correct
not start.
orientation.
orientation.
Charging is slow. The temperature is low.
Charge the battery at room temperature.
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
The battery has reached the end of its
The charging
charging life. Purchase a new battery. If
lamp lights, but The battery has been charged many times.
the battery still fails to charge, contact your
the battery does
FUJIFILM dealer.
not charge.
The charger is not correctly plugged into a Plug the charger correctly into the power
power outlet.
outlet.

Page
5, 13
6
7
—
—
19
—
62
5, 13
5
5
—
—
—

—

Troubleshooting
Menus and Displays
Problem
Menus and displays are
not in English.

Possible cause
English is not selected for the
n w option in the setup menu.

Solution
Select ENGLISH.

Page
12, 72

Shooting
Problem

Taking
pictures

Solution
Page
Insert a new memory card or delete pictures. 8, 41
Format the memory card or internal memory. 75
Clean the contacts with a soft, dry cloth.
—
Insert a new memory card.
8
Insert a fresh or fully-charged spare battery.
6
Turn the camera on.
11
The monitor may darken while the flash
charges. Wait for the flash to charge.
Select macro mode.
Cancel macro mode.
Use focus lock.

32
31
27

Troubleshooting

Focus

Possible cause
Memory is full.
Memory is not formatted.
No picture is
taken when the There is dirt on the memory card contacts.
shutter button is The memory card is damaged.
pressed.
The battery is exhausted.
The camera has turned off automatically.
The monitor
goes dark after The flash has fired.
shooting.
The subject is close to the camera.
The camera does
The subject is far away from the camera.
not focus.
The subject is not suited to autofocus.

Troubleshooting
Problem
Face detection
not available.

Intelligent
No face is
Face
detected.
Detection

Wrong subject
selected.
Macro mode is
Close-ups
not available.

The flash does
not fire.
Flash
Flash mode not
available.

Possible cause
Solution
Page
Intelligent Face Detection is not available
Choose a different shooting mode.
19
in the current shooting mode.
The subject’s face is obscured by
Remove the obstructions.
sunglasses, a hat, long hair, or other objects.
The subject’s face occupies only a small
Change the composition so that the subject’s
24
area of the frame.
face occupies a larger area of the frame.
The subject’s head is at an angle or the
Ask the subject to face the camera and hold
subject is not facing the camera.
their head straight.
The camera is tilted.
Hold the camera straight.
15
The subject’s face is poorly lit.
Shoot in bright light.
—
The selected subject is closer to the center Recompose the picture or turn face detection
24, 27
of the frame than the main subject.
off and frame the picture using focus lock.
Macro mode is not available in the current
Choose a different shooting mode.
19
shooting mode.
The flash is charging.
Wait for the flash to charge.
32
The flash is not available in the current
Choose a different shooting mode.
19
shooting mode.
The battery is exhausted.
Insert a fresh or fully-charged spare battery.
6
An option other than OFF is selected for
62
Turn E CONTINUOUS off.
E CONTINUOUS.
The desired flash mode is not available in
Choose a different shooting mode.
19
the current shooting mode.
The camera is in silent mode.
Turn silent mode off.
33

The flash does
The subject is not in range of the flash.
not fully light the
The flash window is obstructed.
subject.

Position the subject in range of the flash.

Hold the camera correctly.

Troubleshooting
Problem
Pictures are
blurred.

Problem
images

Pictures are
mottled.
Vertical lines
appear in
pictures.

Possible cause
The lens is dirty.
The lens is blocked.
R is displayed during shooting and the
focus frame is displayed in red.
0 is displayed during shooting.
The ambient temperature is high and the
subject is poorly lit.

Solution
Clean the lens.
Keep objects away from the lens.

Page
81
15

Check focus before shooting.

16, 89

Use the flash or a tripod.
This is normal and does not indicate a
malfunction. Choose a lower sensitivity.

The camera has been used continuously at Turn the camera off and wait for it to cool
high temperatures.
down.

Smear appears in The sun or another bright object was in
pictures.
the frame.

60
—

Troubleshooting

White or purple vertical lines may appear
when a very bright object is framed in the
display. This is normal and does not indicate
a malfunction. Smear is not recorded in
photographs but may appear in movies. If
possible, avoid shooting movies with bright
objects in or close to the frame.

Troubleshooting
Playback
Problem
Prob
em
Pictures are
grainy.

Poss ble cause
Possible
Solution
The pictures were taken with a different make
—
or model of camera.
The pictures were taken at an image size of p
—
Pictures
Playback zoom or with a different make or model of camera.
unavailable.
Pictures were saved or cropped at the size of
—
p, or copies created with j RESIZE.
The camera is in silent mode.
Turn silent mode off.
No sound
Playback volume is too low.
Adjust playback volume.
Audio
in movie
The microphone was obstructed.
Hold the camera correctly during recording.
playback.
The speaker is obstructed.
Hold the camera correctly during playback.
Selected
Some of the pictures selected for deletion are Remove protection using the device with
Deletion pictures are
protected.
which it was originally applied.
not deleted.
File numbering
The battery-chamber cover was opened while Turn the camera off before opening the
Frame no. is unexpectedly
the camera was on.
battery-chamber cover.
reset.

Page
—
—
—
33
76
43
45
65

6, 76

Troubleshooting
Connections
Solution
View pictures on the TV.
Connect the camera correctly.
Connect the camera once movie playback
has ended.
Set input to “VIDEO.”
Match the camera r VIDEO SYSTEM
setting to the TV.
Adjust the volume.
Match the camera r VIDEO SYSTEM
setting to the TV.

Page
46
46
45, 46
—
73
—
73

Connect the camera correctly.

Connect the camera correctly.
Turn the printer on.

47
—

—

Troubleshooting

Problem
Prob
em
Poss ble cause
Possible
Monitor is off. The camera is connected to a TV.
The camera is not properly connected.
An A/V cable was connected during movie
playback.
No picture or
Input on the television is set to “TV.”
sound.
TV
The camera is not set to the correct video
standard.
The volume on the television is too low.
The camera is not set to the correct video
No color.
standard.
The computer
does not
The camera is not properly connected.
Computer
recognize the
camera.
The camera is not properly connected.
Pictures can
not be printed. The printer is off.
Only one copy
PictBridge
is printed.
The printer is not PictBridge-compatible.
The date is not
printed.

Troubleshooting
Miscellaneous
Prob em
Problem
Nothing happens
when the shutter
button is pressed.

Poss ble cause
Possible
Temporary camera malfunction.
The battery is exhausted.

The camera does not
Temporary camera malfunction.
function as expected.

Solution
Remove and reinsert the battery or
disconnect and reconnect the AC adapter/
DC coupler.
Insert a fresh or fully-charged spare battery.
Remove and reinsert the battery or
disconnect and reconnect the AC adapter/
DC coupler. If the problem persists, contact
your FUJIFILM dealer.

Page
6
6
6

Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
O (red)
N (blinks red)
0

Description
The battery is low.
The battery is exhausted.
Slow shutter speed. Picture may be blurred.

R
(displayed in red The camera can not focus.
with red focus frame)
Aperture or shutter
speed shown in red
BLINK DETECTED
FOCUS ERROR
TURN OFF THE CAMERA
AND TURN ON AGAIN

Camera malfunction.
The lens barrel is touched.
No memory card inserted when P COPY is
selected in the playback menu.
The memory card or internal memory is not
formatted or the memory card was formatted
in a computer or other device.

CARD NOT INITIALIZED
The memory card contacts require cleaning.

PROTECTED CARD
BUSY

Camera malfunction.
The memory card is locked.
The memory card is incorrectly formatted.

Insert a fresh or fully-charged spare battery.
Use the flash or mount the camera on a tripod.
• Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg. 27).
• If the subject is poorly lit, try focusing at a distance of
about 2 m (6.6 ft.).
• Use macro mode to focus when taking close-ups.
If the subject is dark, use the flash.
Retake the photograph if desired.
Turn the camera off and then on again, taking care not
to touch the lens. If the message persists, contact a
FUJIFILM dealer.
Insert a memory card.
Format the memory card or internal memory using
the m FORMAT option in the camera setup menu
(pg. 75).
Clean the contacts with a soft, dry cloth. If the
message is repeated, format the memory card (pg. 75).
If the message persists, replace the memory card.
Contact a FUJIFILM dealer.
Unlock the memory card (pg. 8).
Use the camera to format the memory card (pg. 75).

Troubleshooting

NO CARD

The subject is too bright or too dark. The
picture will be over- or under-exposed.
A subject or subjects may have blinked.

Solution

Warning Messages and Displays
Warning

CARD ERROR

Descript on
Description
The memory card is not formatted for use in
the camera.

Memory card error or connection error.

Format the memory card (pg. 75).

Clean the contacts with a soft, dry cloth. If the
The memory card contacts require cleaning or
message is repeated, format the memory card (pg. 75).
the memory card is damaged.
If the message persists, replace the memory card.
Incompatible memory card.
Use a compatible memory card.
Camera malfunction.
Contact a FUJIFILM dealer.

x MEMORY FULL
The memory card or internal memory is full;
d MEMORY FULL
INTERNAL MEMORY IS FULL pictures can not be recorded or copied.
INSERT A NEW CARD
Not enough memory remaining to record
additional pictures.
The memory card or internal memory is not
formatted.
WRITE ERROR

READ ERROR

Solution

Delete pictures or insert a memory card with more
free space.
Delete pictures or insert a memory card with more
free space.
Format the memory card or internal memory (pg. 75).
Re-insert the memory card or turn the camera off
and then on again. If the message persists, contact a
FUJIFILM dealer.

The file is corrupt or was not created with the
The file can not be played back.
camera.
Clean the contacts with a soft, dry cloth. If the
The memory card contacts require cleaning. message is repeated, format the memory card (pg. 75).
If the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer.

Warning Messages and Displays
Warning

FRAME NO. FULL

Descript on
Description
The camera has run out of frame numbers
(current frame number is 999-9999).

—
Remove protection before deleting or rotating
pictures.
Select a different source.

These pictures can not be cropped.

These pictures can not be resized.
Copy the pictures to internal memory and create a
new print order.
—
—
Remove protection before rotating pictures (pg. 65).
—

Troubleshooting

An attempt was made to execute IMAGE
SEARCH over too many pictures.
CAN NOT EXECUTE
Red-eye removal can not be applied to the
A CAN NOT EXECUTE selected picture or movie.
An attempt was made to delete or rotate a
PROTECTED FRAME
protected picture.
x NO IMAGE
The source device selected in the playback
P COPY menu contains no pictures.
d NO IMAGE
p CAN NOT CROP An attempt was made to crop a p picture.
t CAN NOT CROP An attempt was made to crop a t picture.
s CAN NOT CROP An attempt was made to crop a s picture.
The picture selected for cropping is damaged
CAN NOT CROP
or was not created with the camera.
t CANNOT EXECUTE An attempt was made to resize a t picture.
s CANNOT EXECUTE An attempt was made to resize a s picture.
The DPOF print order on the current memory
DPOF FILE ERROR
card contains more than 999 images.
CAN NOT SET DPOF
The picture can not be printed using DPOF.
A CAN NOT SET DPOF Movies can not be printed using DPOF.
CAN NOT ROTATE
The picture is protected.
A CAN NOT ROTATE Movies can not be rotated.
TOO MANY FRAMES

Solution
Format the memory card and select RENEW for the
b FRAME NO. option in the G SET-UP menu.
Take a picture to reset frame numbering to 100-0001,
then return to the b FRAME NO. menu and select
CONTINUOUS.
IMAGE SEARCH cannot process 5,000 pictures or
more.

Warning Messages and Displays
Warning
Descript on
Description
PRESS AND HOLD
An attempt was made to choose a flash mode
THE DISP BUTTON TO or adjust the volume with the camera in silent
DEACTIVATE SILENT MODE mode.
A connection error occurred while pictures
COMMUNICATION ERROR were being printed or copied to a computer or
other device.
PRINTER ERROR
PRINTER ERROR
RESUME?

CAN NOT BE PRINTED

Printer out of paper or ink, or other printer
error.

An attempt was made to print a movie, a
picture not created with the camera, or a
picture in a format not supported by the
printer.

Solution
Exit silent mode before choosing a flash mode or
adjusting the volume.
Confirm that the device is turned on and that the USB
cable is connected.
Check printer (see printer manual for details). To
resume printing, turn the printer off and then turn it
back on.
Check printer (see printer manual for details). If
printing does not resume automatically, press MENU/OK
to resume.
Movies and some pictures created with other devices
can not be printed. If the picture was created with the
camera, check the printer manual to confirm that the
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.

Glossary
Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details
visible using optical zoom are simply enlarged, producing a slightly “grainy” image.
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders”
stored in internal memory or on a memory card. The information in the order includes the pictures to
be printed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering
the camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction
during printing.
JPEG (Joint Photographic Experts Group): A compressed file format for color images. The higher the
compression rate, the greater the loss of information and more noticeable drop in quality when the picture is
displayed.
Motion JPEG: An AVI (Audio Video Interleave) format that stores sound and JPEG images in a single file. Motion
JPEG files can be played in Windows Media Player (requires DirectX 8.0 or later) or QuickTime 3.0 or later.
Smear: A phenomenon specific to CCDs which causes white streaks to appear when very bright light sources,
such as the sun or reflected sunlight, appear in the frame.

White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This
process is known as “white balance.”

Appendix

WAV (Waveform Audio Format): A standard Windows audio file format. WAV files have the extension “*.WAV” and
may be compressed or uncompressed. The camera uses uncompressed WAV. WAV files can be played using
Windows Media Player or QuickTime 3.0 or later.

Internal Memory/Memory Card Capacity
The following table shows the recording time or number of available frames at different image
qualities. All figures are approximate; file size varies with the scene recorded, producing wide
variations in the number of files that can be stored. The number of exposures or length remaining
may not diminish at an even rate. You can take a few pictures for trial without a memory card.
■ FinePix JX260/JX250/JV160/JV150
i
Internal memory
(approx. 24 MB)
1 GB
2 GB
4 GB
8 GB
16 GB

Still Pictures (FINE)
n m16:9 m
y3:2 r16:9 7

p )1280*

5 sec.

19 sec.

41 sec.

130
270
550
1,110
2,220

150
310
630
1,270
2,550

180
370
750
1,500
3,010

270
540
1,090
2,180
4,370

580
1,170
2,300
4,700
9,410

850
1,710
3,430
6,870
13,740

920
1,850
3,700
7,400
14,800

3,650
7,310
14,600
29,250
58,520

4 min.
8 min.
17 min.
35 min.
70 min.

13 min.
27 min.
54 min.
108 min.
216 min.

28 min.
57 min.
114 min.
228 min.
456 min.

* Individual movies cannot exceed 2GB in size, regardless of capacity of memory card.

Movies
!*

Internal Memory/Memory Card Capacity

■ FinePix JX210/JX200/JV110/JV100
y
Internal memory
(approx. 24 MB)
1 GB
2 GB
4 GB
8 GB
16 GB

Still Pictures (FINE)
n m16:9 m
!3:2 g16:9 0

p )1280*

Movies
!*

5 sec.

19 sec.

41 sec.

160
320
650
1,300
2,610

180
360
730
1,460
2,920

210
430
860
1,730
3,460

360
730
1,400
2,940
5,880

580
1,100
2,300
4,700
9,410

850
1,710
3,430
6,870
13,740

920
1,850
3,700
7,400
14,800

3,650
7,310
14,600
29,250
58,520

4 min.
8 min.
17 min.
35 min.
70 min.

13 min.
27 min.
54 min.
108 min.
216 min.

28 min.
57 min.
114 min.
228 min.
456 min.

* Individual movies cannot exceed 2GB in size, regardless of capacity of memory card.

Appendix

Specifications
System
Model
Effective pixels
CCD
Storage media
File system
File format
Image size (pixels)

Lens
Focal length

Digital zoom

FinePix JX260/JX250/JV160/JV150
FinePix JX210/JX200/JV110/JV100
14 million
12.2 million
½.3 -in., square-pixel CCD with primary color filter
• Internal memory (approx. 24 MB)
• SD/SDHC memory cards (see page 8)
Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format
(DPOF)
• Still pictures: Exif 2.2 JPEG (compressed)
• Movies: AVI-format Motion JPEG
• i 4,288 × 3,216
• y3:2 4,288 × 2,864
• y 4,000 × 3,000
• !3:2 4,000 × 2,664
• r16:9 4,288 × 2,416 • 7 3,072 × 2,304
• g16:9 4,000 × 2,248 • 0 2,816 × 2,112
• n 2,048 × 1,536
• m16:9 1,920 × 1,080
• n 2,048 × 1,536
• m16:9 1,920 × 1,080
• m 1,600 × 1,200
• p 640 × 480
• m 1,600 × 1,200
• p 640 × 480
FinePix JX260/JX250/JX210/JX200
Fujinon 5 × optical zoom lens, F3.6 (wide angle) – F5.9 (telephoto)
f=5.0 mm–25.0 mm (35-mm format equivalent: 28 mm–140 mm)
FinePix JV160/JV150/JV110/JV100
Fujinon 3 × optical zoom lens, F3.2 (wide angle) – F5.9 (telephoto)
f=6.6 mm–19.8 mm (35-mm format equivalent: 37 mm–111 mm)
FinePix JX260/JX250
Approx. 6.7 × (up to 33.5 × when combined with optical zoom)
FinePix JX210/JX200
Approx. 6.3 × (up to 31.5 × when combined with optical zoom)
FinePix JV160/JV150
Approx. 6.7 × (up to 20.1 × when combined with optical zoom)
FinePix JV110/JV100
Approx. 6.3 × (up to 18.9 × when combined with optical zoom)

Specifications
System
Aperture

Appendix

FinePix JX260/JX250/JX210/JX200
F3.6/F8.0 (wide angle), F5.9/F13.0 (telephoto), uses Neutral Density (ND) filter
FinePix JV160/JV150/JV110/JV100
F3.2/F4.3 (wide angle), F5.9/F8.0 (telephoto)
Focus range (distance from FinePix JX260/JX250/JX210/JX200
front of lens)
Approx. 45 cm (1.5 ft.)–infinity (wide angle); 80 cm (2.6 ft.)–infinity (telephoto)
Macro: approx. 10 cm–80 cm/3.9 in.–2.6 ft. (wide angle); 60 cm–100 cm/2.0 ft.–3.3 ft. (telephoto)
FinePix JV160/JV150/JV110/JV100
Approx. 60 cm (2.0 ft.)–infinity
Macro: approx. 10 cm–70 cm/3.9 in.–2.3 ft. (wide angle); 60 cm–100 cm/2.0 ft.–3.3 ft. (telephoto)
Sensitivity
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200*, AUTO
* max. number of recorded pixels: n
Metering
256-segment through-the-lens (TTL) metering
Exposure control
Programmed autoexposure
Exposure compensation
–2 EV – +2 EV in increments of 1/3 EV (P)
Scene modes
A (NATURAL AND FLASH LIGHTING), B (NATURAL LIGHT), U (PORTRAIT), d (BABY), 2 (SMILE),
K (LANDSCAPE), W (PANORAMA), L (SPORT), D (NIGHT), U (NIGHT (TRIPOD)),
W (FIREWORKS), E (SUNSET), F (SNOW), G (BEACH), I (PARTY), O (FLOWER), P (TEXT)
Image stabilization
Available
Intelligent Face Detection Available
Shutter speed
FinePix JX260/JX250/JX210/JX200
¼ s–1/1,400 s (AUTO mode); 8 s–1/1,400 s (other modes); combined mechanical and electronic shutter
FinePix JV160/JV150/JV110/JV100
¼ s–1/2,000 s (AUTO mode); 8 s–1/2,000 s (other modes); combined mechanical and electronic shutter
Continuous
FinePix JX260/JX250/JV160/JV150
Up to 1.2 fps; max. 3 frames
FinePix JX210/JX200/JV110/JV100
Up to 1.7 fps; max. 3 frames

Specifications
System
Focus
White balance
Self-timer
Flash

Flash modes
Monitor
Frame coverage
Movies
Shooting options
Playback options
Other options

• Mode: Center AF, Tracking AF (P/AUTO)
• Autofocus system: Contrast-detect TTL AF
Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent,
warm white fluorescent, cool white fluorescent, and incandescent
Off, 2 sec., 10 sec.
FinePix JX260/JX250/JX210/JX200
Auto flash; effective range when sensitivity is set to AUTO is approx. 40 cm–3.0 m/1.3 ft.–9.8 ft. (wide
angle), 80 cm–2.0 m/2.6 ft.–6.6 ft. (telephoto), 30 cm–80 cm/1.0 ft.–2.6 ft. (macro)
FinePix JV160/JV150/JV110/JV100
Auto flash; effective range when sensitivity is set to AUTO is approx. 60 cm–3.5 m/2.0 ft.–11.5 ft. (wide
angle), 60 cm–2.0 m/2.0 ft.–6.6 ft. (telephoto), 30 cm–80 cm/1.0 ft.–2.6 ft. (macro)
Auto, forced flash, off, slow synchro (red-eye removal off); auto with red-eye removal, forced flash with
red-eye removal, off, slow synchro with red-eye removal (red-eye removal on)
2.7-in., 230k-dot color LCD monitor
Approx. 96%
Frame size 1,280 × 720, 640 × 480 or 320 × 240 pixels; 30 fps; monaural sound
Scene recognition, Intelligent Face Detection with red-eye removal, framing guideline (best
framing), frame number memory, blink detection
Intelligent Face Detection, red-eye removal, micro thumbnail, multi-frame playback, image search,
crop, resize, slide show, image rotation
PictBridge, Exif Print, language selection (Japanese / English / French / German / Spanish / Italian /
Simplified Chinese / Korean / Dutch / Portuguese / Russian / Thai / Turkish / Traditional Chinese /
Czech / Hungarian / Polish / Swedish / Slovak / Danish / Norwegian / Finnish / Arabic / Farsi /
Greek / Lithuanian / Ukraine), time difference, silent mode

Specifications
Input/output terminals
A/V OUT (audio/video output)
Digital input/output
Power supply/other
Power supply
Guide to the number of
available frames for battery
operation

Camera dimensions
(W × H × D)

Camera weight

Operating conditions

NP-45A rechargeable battery
Battery Type NP-45A Number of frames (AUTO mode) Approx. 180 frames
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be SD
memory card.
Note that the number of shots that can be taken with a fully-charged battery varies with
temperature and shooting conditions.
FinePix JX260/JX250/JX210/JX200
93.0 mm × 55.0 mm × 22.9 (18.5*) mm/3.7 in. × 2.2 in. × 0.9 (0.7*) in.,
* excluding projecting parts, measured at the thinnest part
FinePix JV160/JV150/JV110/JV100
93.0 mm × 55.0 mm × 20.6 (18.9*) mm/3.7 in. × 2.2 in. × 0.8 (0.7*) in.,
* excluding projecting parts, measured at the thinnest part
FinePix JX260/JX250/JX210/JX200
Approx. 113 g/4.0 oz., excluding batteries, accessories, and memory cards
FinePix JV160/JV150/JV110/JV100
Approx. 106 g/3.7 oz., excluding batteries, accessories, and memory cards
FinePix JX260/JX250/JX210/JX200
Approx. 130 g/4.6 oz., including batteries and memory card
FinePix JV160/JV150/JV110/JV100
Approx. 123 g/4.3 oz., including batteries and memory card
Temperature: 0 °C to +40 °C (+32 °F to +104 °F)
85% humidity or less (no condensation)

Appendix

Shooting weight

NTSC or PAL with monaural sound
USB 2.0 High Speed; shares A/V OUT connector

Specifications
NP-45A rechargeable battery
Nominal voltage
DC 3.7 V
Nominal capacity
720 mAh
Dimensions (W × H × D)
31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.6 in. × 0.2 in.
Weight
Approx. 15 g/0.5 oz.
BC-45B battery charger
Rated input
Input capacity
Rated output
Supported batteries
Charging time
Dimensions (W × H × D)
Weight
Operating temperature

100 V–240 V AC, 50/60 Hz
6.0 VA (100 V / 240 V)
4.2 V DC, 550 mA
NP-45 rechargeable batteries
Approx. 110 minutes (25 °C / 77 °F)
91 mm × 46 mm × 23 mm/3.6 in. × 1.8 in. × 0.9 in.
Approx. 65 g/2.3 oz., excluding battery
0 °C – +40 °C/+32 °F – +104 °F

The weight and dimensions vary with the country or region of sale.

100

Specifications
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in
the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in
European countries and China.
Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
• Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and
does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static
electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.

Appendix

101

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2010:01:28 09:18:47+09:00
Author                          : FUJIFILM
Title                           : FinePix JX200 JV100
Modify Date                     : 2017:12:20 03:38:20Z
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Page Count                      : 116

EXIF Metadata provided by EXIF.tools

FinePix JX200 JV100 Fujifilm Fine Pix Manual User Guide And Product Specification

Navigation menu

Versions of this User Manual:

Views

Navigation